source: MondoRescue/branches/stable/mindi-busybox/e2fsprogs/chattr.c @ 1770

Last change on this file since 1770 was 1770, checked in by Bruno Cornec, 12 years ago
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <arnaud.tiger_at_hp.com>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod? silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian? keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René? Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

File size: 4.5 KB
Line 
1/* vi: set sw=4 ts=4: */
2/*
3 * chattr.c     - Change file attributes on an ext2 file system
4 *
5 * Copyright (C) 1993, 1994  Remy Card <card@masi.ibp.fr>
6 *                           Laboratoire MASI, Institut Blaise Pascal
7 *                           Universite Pierre et Marie Curie (Paris VI)
8 *
9 * This file can be redistributed under the terms of the GNU General
10 * Public License
11 */
12
13/*
14 * History:
15 * 93/10/30 - Creation
16 * 93/11/13 - Replace stat() calls by lstat() to avoid loops
17 * 94/02/27 - Integrated in Ted's distribution
18 * 98/12/29 - Ignore symlinks when working recursively (G M Sipe)
19 * 98/12/29 - Display version info only when -V specified (G M Sipe)
20 */
21
22#include "libbb.h"
23#include "e2fs_lib.h"
24
25#define OPT_ADD 1
26#define OPT_REM 2
27#define OPT_SET 4
28#define OPT_SET_VER 8
29
30struct globals {
31    unsigned long version;
32    unsigned long af;
33    unsigned long rf;
34    smallint flags;
35    smallint recursive;
36};
37
38static unsigned long get_flag(char c)
39{
40    /* Two separate vectors take less space than vector of structs */
41    static const char flags_letter[] ALIGN1 = "ASDacdijsutT";
42    static const unsigned long flags_val[] = {
43        /* A */ EXT2_NOATIME_FL,
44        /* S */ EXT2_SYNC_FL,
45        /* D */ EXT2_DIRSYNC_FL,
46        /* a */ EXT2_APPEND_FL,
47        /* c */ EXT2_COMPR_FL,
48        /* d */ EXT2_NODUMP_FL,
49        /* i */ EXT2_IMMUTABLE_FL,
50        /* j */ EXT3_JOURNAL_DATA_FL,
51        /* s */ EXT2_SECRM_FL,
52        /* u */ EXT2_UNRM_FL,
53        /* t */ EXT2_NOTAIL_FL,
54        /* T */ EXT2_TOPDIR_FL,
55    };
56    const char *fp;
57
58    for (fp = flags_letter; *fp; fp++)
59        if (*fp == c)
60            return flags_val[fp - flags_letter];
61    bb_show_usage();
62}
63
64static int decode_arg(const char *arg, struct globals *gp)
65{
66    unsigned long *fl;
67    char opt = *arg++;
68
69    fl = &gp->af;
70    if (opt == '-') {
71        gp->flags |= OPT_REM;
72        fl = &gp->rf;
73    } else if (opt == '+') {
74        gp->flags |= OPT_ADD;
75    } else if (opt == '=') {
76        gp->flags |= OPT_SET;
77    } else
78        return 0;
79
80    while (*arg)
81        *fl |= get_flag(*arg++);
82
83    return 1;
84}
85
86static void change_attributes(const char *name, struct globals *gp);
87
88static int chattr_dir_proc(const char *dir_name, struct dirent *de, void *gp)
89{
90    char *path = concat_subpath_file(dir_name, de->d_name);
91    /* path is NULL if de->d_name is "." or "..", else... */
92    if (path) {
93        change_attributes(path, gp);
94        free(path);
95    }
96    return 0;
97}
98
99static void change_attributes(const char *name, struct globals *gp)
100{
101    unsigned long fsflags;
102    struct stat st;
103
104    if (lstat(name, &st) != 0) {
105        bb_perror_msg("stat %s", name);
106        return;
107    }
108    if (S_ISLNK(st.st_mode) && gp->recursive)
109        return;
110
111    /* Don't try to open device files, fifos etc.  We probably
112     * ought to display an error if the file was explicitly given
113     * on the command line (whether or not recursive was
114     * requested).  */
115    if (!S_ISREG(st.st_mode) && !S_ISLNK(st.st_mode) && !S_ISDIR(st.st_mode))
116        return;
117
118    if (gp->flags & OPT_SET_VER)
119        if (fsetversion(name, gp->version) != 0)
120            bb_perror_msg("setting version on %s", name);
121
122    if (gp->flags & OPT_SET) {
123        fsflags = gp->af;
124    } else {
125        if (fgetflags(name, &fsflags) != 0) {
126            bb_perror_msg("reading flags on %s", name);
127            goto skip_setflags;
128        }
129        /*if (gp->flags & OPT_REM) - not needed, rf is zero otherwise */
130            fsflags &= ~gp->rf;
131        /*if (gp->flags & OPT_ADD) - not needed, af is zero otherwise */
132            fsflags |= gp->af;
133        /* What is this? And why it's not done for SET case? */
134        if (!S_ISDIR(st.st_mode))
135            fsflags &= ~EXT2_DIRSYNC_FL;
136    }
137    if (fsetflags(name, fsflags) != 0)
138        bb_perror_msg("setting flags on %s", name);
139
140 skip_setflags:
141    if (gp->recursive && S_ISDIR(st.st_mode))
142        iterate_on_dir(name, chattr_dir_proc, gp);
143}
144
145int chattr_main(int argc, char **argv);
146int chattr_main(int argc, char **argv)
147{
148    struct globals g;
149    char *arg;
150
151    memset(&g, 0, sizeof(g));
152
153    /* parse the args */
154    while ((arg = *++argv)) {
155        /* take care of -R and -v <version> */
156        if (arg[0] == '-'
157         && (arg[1] == 'R' || arg[1] == 'v')
158         && !arg[2]
159        ) {
160            if (arg[1] == 'R') {
161                g.recursive = 1;
162                continue;
163            }
164            /* arg[1] == 'v' */
165            if (!*++argv)
166                bb_show_usage();
167            g.version = xatoul(*argv);
168            g.flags |= OPT_SET_VER;
169            continue;
170        }
171
172        if (!decode_arg(arg, &g))
173            break;
174    }
175
176    /* run sanity checks on all the arguments given us */
177    if (!*argv)
178        bb_show_usage();
179    if ((g.flags & OPT_SET) && (g.flags & (OPT_ADD|OPT_REM)))
180        bb_error_msg_and_die("= is incompatible with - and +");
181    if (g.rf & g.af)
182        bb_error_msg_and_die("can't set and unset a flag");
183    if (!g.flags)
184        bb_error_msg_and_die("must use '-v', =, - or +");
185
186    /* now run chattr on all the files passed to us */
187    do change_attributes(*argv, &g); while (*++argv);
188
189    return EXIT_SUCCESS;
190}
Note: See TracBrowser for help on using the repository browser.