[747] | 1 | #!/bin/bash
|
---|
| 2 |
|
---|
| 3 | # $Id: mindi 3705 2018-04-12 23:17:45Z bruno $
|
---|
| 4 | #
|
---|
| 5 | #-----------------------------------------------------------------------------
|
---|
| 6 | # mindi - mini-Linux distro based on the user's filesystem & distribution
|
---|
| 7 | #
|
---|
[1880] | 8 | # Mindi can create a multi-image boot/root kit. The first image is the boot
|
---|
[747] | 9 | # disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
|
---|
| 10 | # the third disk is data disk #2; and so it goes.
|
---|
| 11 | #
|
---|
| 12 | # See http://www.mondorescue.org for details.
|
---|
| 13 | #-----------------------------------------------------------------------------
|
---|
| 14 |
|
---|
| 15 | ### Which arch are we on (useful for ia64 port)
|
---|
[1565] | 16 | ARCH=`/bin/uname -m`
|
---|
[2292] | 17 | KERVERRUN=`/bin/uname -r`
|
---|
| 18 | # By default we use the running kernel as a reference
|
---|
| 19 | KERVER=$KERVERRUN
|
---|
[747] | 20 |
|
---|
[2442] | 21 | # In case of problem with udev you can try to add udevdebug
|
---|
[2564] | 22 | MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
|
---|
[3053] | 23 | MINDI_DEFAULT_BOOT_OPTION="interactive"
|
---|
| 24 | # For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
|
---|
| 25 | # So this parameter only applies to non CD recovery.
|
---|
| 26 | MINDI_BOOT_TIMEOUT="300"
|
---|
[747] | 27 |
|
---|
[1691] | 28 | MINDI_REV=PBREV
|
---|
| 29 | MINDI_VER=PBVER
|
---|
[747] | 30 |
|
---|
| 31 | MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
|
---|
| 32 | MINDI_PREFIX=XXX
|
---|
| 33 | MINDI_CONF=YYY
|
---|
| 34 | MINDI_SBIN=${MINDI_PREFIX}/sbin
|
---|
[934] | 35 | MINDI_LIB=LLL
|
---|
[3149] | 36 | MINDI_CACHE=/var/cache/mindi
|
---|
[747] | 37 |
|
---|
[3278] | 38 | MRCFG=mondorestore.cfg
|
---|
| 39 |
|
---|
[925] | 40 | # Temporary directory for mindi
|
---|
[3499] | 41 | TMPDIR=${TMPDIR:=/tmp}
|
---|
| 42 | if [ ! -d $TMPDIR ]; then
|
---|
| 43 | mkdir -p $TMPDIR
|
---|
| 44 | fi
|
---|
[925] | 45 |
|
---|
[3692] | 46 | EXTRA_SPACE=20000 # increase if you run out of ramdisk space - Default 20 MB
|
---|
[747] | 47 |
|
---|
| 48 | PROMPT_MAKE_CD_IMAGE="yes"
|
---|
| 49 | # Ask if you want to make a CD Image to be written?
|
---|
[3522] | 50 | # if this is set to 'no' in the conf file, then the image will be created automatically
|
---|
[747] | 51 |
|
---|
[1684] | 52 | PROMPT_MAKE_USB_IMAGE="yes"
|
---|
| 53 | # Ask if you want to make a USB Image to be written?
|
---|
[3522] | 54 | # if this is set to 'no' in the conf file, then the image will be created automatically
|
---|
[1684] | 55 |
|
---|
[966] | 56 | USE_OWN_KERNEL="yes"
|
---|
[747] | 57 | # If set to "no", you will be prompted for whether or not
|
---|
| 58 | # you want to use your own kernel, or the supplied default.
|
---|
| 59 | # If "yes" mindi will automatically use your own kernel.
|
---|
[925] | 60 |
|
---|
[2629] | 61 | KERNEL_IS_XEN="no"
|
---|
| 62 | # If set to "no", the kernel is not a Xen kernel
|
---|
| 63 | # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
|
---|
[2880] | 64 | xenkernelpath=""
|
---|
[2629] | 65 |
|
---|
[747] | 66 | MY_FSTAB=/etc/fstab
|
---|
| 67 | TAPE_MODS="ht st osst ide-tape ide_tape"
|
---|
[3693] | 68 | SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa hpdsa smartpqi dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
|
---|
[747] | 69 |
|
---|
| 70 | # ide-probe-mod
|
---|
[3661] | 71 | IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc raid0 raid1 raid456 drbd"
|
---|
[747] | 72 | PCMCIA_MODS="pcmcia_core ds yenta_socket"
|
---|
[3605] | 73 | USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic hid_microsoft hid-microsoft uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
|
---|
[3446] | 74 | NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
|
---|
[3607] | 75 | CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 nls_cp437 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash dm-thin-pool multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs ntfs nls_utf8"
|
---|
[1230] | 76 | # Replace with that line for HP OCMP e.g.
|
---|
[2073] | 77 | #DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
|
---|
[3055] | 78 | DENY_MODS="kqemu vxfen"
|
---|
[1399] | 79 | # Force some modules to be included
|
---|
[1354] | 80 | FORCE_MODS=""
|
---|
[925] | 81 |
|
---|
[747] | 82 | LOGFILE=/var/log/mindi.log
|
---|
| 83 | BOOT_MEDIA_MESSAGE="\
|
---|
[3173] | 84 | To format and restore all files automatically, type '0enuke07' <enter>.\n\
|
---|
| 85 | To restore some/all files interactively, type '0einteractive07' <enter>.\n\
|
---|
| 86 | To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
|
---|
| 87 | To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
|
---|
| 88 | \n\
|
---|
| 89 | You may add one or more parameters as well as per the function keys below\n\
|
---|
| 90 | e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
|
---|
| 91 | \n\
|
---|
| 92 | If restoring from a local external disk or USB key, do not connect it \n\
|
---|
| 93 | until the boot-up has finished.\n\
|
---|
| 94 | \n\
|
---|
| 95 | \n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
|
---|
[747] | 96 | "
|
---|
[3377] | 97 | FDISK=$MINDI_SBIN/mr-parted2fdisk
|
---|
[747] | 98 |
|
---|
[925] | 99 | # Using a config file allow to overwrite some values
|
---|
| 100 | MINDI_CONFIG="$MINDI_CONF/mindi.conf"
|
---|
| 101 | if [ -f $MINDI_CONFIG ]; then
|
---|
| 102 | . $MINDI_CONFIG
|
---|
| 103 | fi
|
---|
[1885] | 104 | DEPLIST_FILE="$MINDI_CONF/deplist.txt"
|
---|
[2409] | 105 | DEPLIST_DIR="$MINDI_CONF/deplist.d"
|
---|
| 106 |
|
---|
[3502] | 107 | # Debian 8 system e.g. use xorriso for UEFI support.
|
---|
| 108 | # However, they use exactly the same command line parameters as mkisofs, so just
|
---|
| 109 | # use it if it's available.
|
---|
| 110 | ISO_CMD="/usr/bin/xorriso"
|
---|
| 111 |
|
---|
| 112 | # Mandriva system e.g. use cdrkit, which uses genisoimage.
|
---|
| 113 | # However, they use exactly the same command line parameters as mkisofs, so just
|
---|
| 114 | # use it if it's available.
|
---|
| 115 | if [ ! -x $ISO_CMD ]; then
|
---|
[3505] | 116 | ISO_CMD="/usr/bin/genisoimage"
|
---|
[3515] | 117 | # For compatibility with previous versions default to mkisofs
|
---|
| 118 | if [ ! -x $ISO_CMD ]; then
|
---|
| 119 | ISO_CMD="/usr/bin/mkisofs"
|
---|
| 120 | fi
|
---|
| 121 | if [ ! -x $ISO_CMD ]; then
|
---|
| 122 | LogFile "NOTE: No CD image (ISO file) utility found"
|
---|
| 123 | ISO_CMD = ""
|
---|
| 124 | fi
|
---|
| 125 | else
|
---|
| 126 | ISO_CMD="/usr/bin/xorriso -as mkisofs"
|
---|
[3502] | 127 | fi
|
---|
| 128 |
|
---|
[3596] | 129 | ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi -V MindiCD -o $MINDI_CACHE/mindi.iso "
|
---|
[925] | 130 |
|
---|
[3421] | 131 | # Mindi set this as default in case it's invoked alone
|
---|
| 132 | BOOT_TYPE="BIOS"
|
---|
| 133 | # and we also check whether we're UEFI or not.
|
---|
| 134 | if [ -d "/sys/firmware/efi" ]; then
|
---|
| 135 | BOOT_TYPE="UEFI"
|
---|
[3429] | 136 | else
|
---|
| 137 | # Find MBR in case of bootable USB device to build
|
---|
| 138 | MBRFILE=/usr/lib/syslinux/mbr.bin
|
---|
| 139 | [ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
|
---|
| 140 | [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
|
---|
| 141 | [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
|
---|
| 142 | [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
|
---|
[3421] | 143 | fi
|
---|
[3403] | 144 |
|
---|
[2880] | 145 | # Function to log on screen only
|
---|
| 146 | LogScreen() {
|
---|
[3368] | 147 | if [ -e /dev/stderr ] ; then
|
---|
| 148 | echo -e "$1" >> /dev/stderr
|
---|
| 149 | elif [ -e /usr/bin/logger ] ; then
|
---|
| 150 | /usr/bin/logger -s $1
|
---|
| 151 | fi
|
---|
[2880] | 152 | }
|
---|
[2685] | 153 |
|
---|
[2880] | 154 | # Function to log in log file only
|
---|
| 155 | LogFile() {
|
---|
| 156 |
|
---|
[3368] | 157 | echo -e "$1" >> $LOGFILE
|
---|
| 158 | if [ _"$2" != _"" ]; then
|
---|
[3403] | 159 | grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
|
---|
[3432] | 160 | rm -f "$2"
|
---|
[3368] | 161 | fi
|
---|
[2880] | 162 | }
|
---|
| 163 |
|
---|
| 164 | # Function to log in both screen and logfile
|
---|
| 165 | LogAll() {
|
---|
[3368] | 166 | LogScreen "$1"
|
---|
| 167 | LogFile "$1" "$2"
|
---|
[2880] | 168 | }
|
---|
| 169 |
|
---|
[2963] | 170 | # Last function called before exiting
|
---|
| 171 | # Parameter is exit code value
|
---|
| 172 | # Should be declared here as used immediately below potentialy
|
---|
| 173 | MindiExit() {
|
---|
[3522] | 174 | LogFile "INFO: Mindi $MINDI_VERSION is exiting"
|
---|
| 175 | LogFile "INFO: End date : `date`"
|
---|
[2963] | 176 | if [ _"$MONDO_SHARE" != _"" ] ; then
|
---|
| 177 | echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
|
---|
[2995] | 178 | if [ -f $LOGFILE ]; then
|
---|
| 179 | cat $LOGFILE >> /var/log/mondoarchive.log
|
---|
| 180 | else
|
---|
| 181 | echo "No LOGFILE available in that mindi run" >> /var/log/mondoarchive.log
|
---|
| 182 | fi
|
---|
[2963] | 183 | echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
|
---|
| 184 | fi
|
---|
[2880] | 185 |
|
---|
[2963] | 186 | cd /
|
---|
| 187 | sync&
|
---|
| 188 |
|
---|
| 189 | # Clean temporary files only when standalone mindi
|
---|
| 190 | if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
|
---|
| 191 | rm -Rf $MINDI_TMP
|
---|
| 192 | fi
|
---|
| 193 | exit $1
|
---|
| 194 | }
|
---|
| 195 |
|
---|
[2685] | 196 | Die() {
|
---|
| 197 | if [ "$1" = "" ] ; then
|
---|
[3149] | 198 | LogAll "FATAL ERROR"
|
---|
[2685] | 199 | else
|
---|
[3149] | 200 | LogAll "FATAL ERROR. $1"
|
---|
[2685] | 201 | fi
|
---|
| 202 | if [ _"$2" != _"" ]; then
|
---|
[3403] | 203 | grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
|
---|
[2685] | 204 | fi
|
---|
| 205 | rm -f "$2"
|
---|
| 206 |
|
---|
[3149] | 207 | LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
|
---|
| 208 | LogAll "See http://www.mondorescue.org for more information."
|
---|
| 209 | LogAll "WE CANNOT HELP unless you enclose that file.\n"
|
---|
[2685] | 210 | MindiExit -1
|
---|
| 211 | }
|
---|
| 212 |
|
---|
[1485] | 213 | # Now we can create what we need
|
---|
[2150] | 214 | MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
|
---|
| 215 | if [ $? -ne 0 ]; then
|
---|
| 216 | df $TMPDIR
|
---|
| 217 | Die "Unable to create a temporary directory ! Check space on $TMPDIR"
|
---|
| 218 | fi
|
---|
[2153] | 219 | if [ _"$MINDI_TMP" = _"" ]; then
|
---|
| 220 | Die "MINDI_TMP is empty, aborting"
|
---|
| 221 | fi
|
---|
| 222 | if [ _"$MINDI_TMP" = _"/" ]; then
|
---|
| 223 | Die "MINDI_TMP is /, aborting"
|
---|
| 224 | fi
|
---|
[2150] | 225 | export MINDI_TMP
|
---|
[940] | 226 |
|
---|
[747] | 227 | # ----------------------------------------------------------------------------
|
---|
| 228 |
|
---|
| 229 |
|
---|
| 230 | AbortHere() {
|
---|
| 231 | Die "Program is terminating in response to signal received from OS/user"
|
---|
| 232 | }
|
---|
| 233 |
|
---|
| 234 |
|
---|
| 235 | Aborted() {
|
---|
| 236 | trap SIGHUP SIGTERM SIGTRAP SIGINT
|
---|
[1880] | 237 | [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
|
---|
[747] | 238 | Die "User abort."
|
---|
| 239 | }
|
---|
| 240 |
|
---|
| 241 |
|
---|
| 242 | AddFileToCfgIfExists() {
|
---|
| 243 | [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
|
---|
| 244 | }
|
---|
| 245 |
|
---|
| 246 |
|
---|
| 247 | AddKeyboardMappingFile() {
|
---|
| 248 | local mappath r included_list included_item i res ii sss
|
---|
| 249 | mappath=$1
|
---|
| 250 | KBDEPTH=$(($KBDEPTH+1))
|
---|
| 251 | [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
|
---|
| 252 | if [ -e "$bigdir/$mappath" ] ; then
|
---|
[3149] | 253 | LogFile "INFO: $mappath already added"
|
---|
[747] | 254 | return
|
---|
| 255 | elif [ -d "$bigdir/$mappath" ] ; then
|
---|
| 256 | echo "Cannot add $mappath: it's a directory. Sorry."
|
---|
| 257 | return
|
---|
| 258 | fi
|
---|
[3149] | 259 | LogFile "INFO: Added kbd map $mappath"
|
---|
[747] | 260 | if [ ! -e "$mappath" ] ; then
|
---|
[3149] | 261 | mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
|
---|
[747] | 262 | if [ ! -e "$mappath" ] ; then
|
---|
[3149] | 263 | LogAll "WARNING: Cannot add $mappath: kbd map file not found"
|
---|
[747] | 264 | return
|
---|
| 265 | fi
|
---|
| 266 | fi
|
---|
| 267 |
|
---|
[3149] | 268 | tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
|
---|
[747] | 269 | if [ "`echo $mappath | grep -F ".gz"`" ] ; then
|
---|
[3023] | 270 | included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
|
---|
[747] | 271 | else
|
---|
[3023] | 272 | included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
|
---|
[747] | 273 | fi
|
---|
| 274 | for included_item in $included_list ; do
|
---|
[925] | 275 | if [ ! -e "$included_item" ] ; then
|
---|
[3149] | 276 | sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
|
---|
[1764] | 277 | [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
|
---|
[925] | 278 | for ii in $sss ; do
|
---|
[3546] | 279 | [ -e "$ii" ] && AddKeyboardMappingFile $ii
|
---|
[925] | 280 | done
|
---|
| 281 | else
|
---|
| 282 | AddKeyboardMappingFile $included_item
|
---|
| 283 | fi
|
---|
[747] | 284 | done
|
---|
| 285 | }
|
---|
| 286 |
|
---|
| 287 |
|
---|
| 288 | CopyDependenciesToDirectory() {
|
---|
[3403] | 289 | local outdir incoming counter d found tdir templog
|
---|
[747] | 290 | outdir=$1
|
---|
[3403] | 291 | templog=$MINDI_TMP/$$.log
|
---|
[747] | 292 | mkdir -p $outdir
|
---|
| 293 | incoming=`ReadLine`
|
---|
[3522] | 294 | counter=$3
|
---|
[3403] | 295 | > $templog
|
---|
| 296 |
|
---|
[747] | 297 | while [ "$incoming" != "" ] ; do
|
---|
[3522] | 298 | if [ "$3" = "1" ]; then
|
---|
| 299 | counter=$(($counter+1))
|
---|
| 300 | LogProgress $counter $2
|
---|
| 301 | fi
|
---|
[1526] | 302 | # Non absolute file names should not arrive till here => skipped
|
---|
| 303 | if [ `echo "$incoming" | cut -c1` != '/' ]; then
|
---|
[3149] | 304 | LogAll "WARNING: Unable to handle $incoming"
|
---|
[1526] | 305 | incoming=`ReadLine`
|
---|
| 306 | continue
|
---|
| 307 | fi
|
---|
| 308 | # no parent directory of incoming should be a link, copy is not possible in that case
|
---|
| 309 | d=`dirname "$incoming"`
|
---|
| 310 | found="false"
|
---|
| 311 | while [ $d != "/" -a $found = "false" ]; do
|
---|
| 312 | [ -h "$d" ] && found="true"
|
---|
| 313 | d=`dirname "$d"`
|
---|
| 314 | done
|
---|
[3166] | 315 | if [ -d "$incoming" -a ! -h "$incoming" ]; then
|
---|
[3522] | 316 | find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0 0
|
---|
[1526] | 317 | elif [ -e "$incoming" ] && [ $found = "false" ]; then
|
---|
[3075] | 318 | if [ ! -h "$incoming" ]; then
|
---|
[3405] | 319 | tar cf - -C / $incoming 2> $templog | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
|
---|
[3075] | 320 | else
|
---|
| 321 | tdir=`dirname "$incoming"`
|
---|
| 322 | if [ ! -e "$outdir/$tdir" ]; then
|
---|
| 323 | mkdir -p "$outdir/$tdir"
|
---|
| 324 | fi
|
---|
| 325 | cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
|
---|
| 326 | fi
|
---|
[1989] | 327 | # Only uncompress modules if not using udevd
|
---|
| 328 | if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
|
---|
[3149] | 329 | gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
|
---|
[925] | 330 | fi
|
---|
[3075] | 331 | [ -x "$outdir" ] && StripExecutable $outdir
|
---|
[747] | 332 | fi
|
---|
| 333 | incoming=`ReadLine`
|
---|
| 334 | done
|
---|
| 335 | }
|
---|
| 336 |
|
---|
| 337 |
|
---|
| 338 | CountItemsIn() {
|
---|
| 339 | local r
|
---|
| 340 | r=0
|
---|
| 341 | for q in $1 ; do
|
---|
| 342 | r=$(($r+1))
|
---|
| 343 | done
|
---|
| 344 | echo $r
|
---|
| 345 | }
|
---|
| 346 |
|
---|
| 347 |
|
---|
| 348 | DropOptimizedLibraries() {
|
---|
| 349 | local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
|
---|
| 350 | filelist=$1
|
---|
| 351 | outdir=$2
|
---|
| 352 |
|
---|
| 353 | list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
|
---|
| 354 | if [ "$list_of_optimized_libraries" = "" ] ; then
|
---|
[859] | 355 | return 0
|
---|
[747] | 356 | fi
|
---|
| 357 | echo -en "Dropping i686-optimized libraries if appropriate"
|
---|
| 358 | for optimized_lib_name in $list_of_optimized_libraries ; do
|
---|
[859] | 359 | echo -en "."
|
---|
| 360 | reason=""
|
---|
[1483] | 361 | vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
|
---|
[859] | 362 | echo "$vanilla_lib_name" >> $filelist
|
---|
[2963] | 363 | LogFile "INFO: Adding $vanilla_lib_name to filelist"
|
---|
[859] | 364 | mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
|
---|
| 365 | rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
|
---|
[2168] | 366 |
|
---|
| 367 | # This may return multiple files
|
---|
[3231] | 368 | for resolved in `mr-read-all-link $vanilla_lib_name`; do
|
---|
[2963] | 369 | LogFile "INFO: Adding as deps $resolved to filelist"
|
---|
[2168] | 370 | vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
|
---|
[3149] | 371 | if [ "$vanilla_resolved_name" != "$resolved" ]; then
|
---|
| 372 | mkdir -p $outdir$resolved> /dev/null 2> /dev/null
|
---|
| 373 | rmdir $outdir$resolved > /dev/null 2> /dev/null
|
---|
| 374 | ln -sf $vanilla_resolved_name $outdir$resolved
|
---|
| 375 | LogFile "INFO: Excluding deps $resolved"
|
---|
| 376 | grep -Fvx "$resolved" "$filelist" > $filelist.tmp
|
---|
| 377 | LogFile "INFO: Replacing it with $vanilla_resolved_name"
|
---|
| 378 | echo "$vanilla_resolved_name" >> $filelist.tmp
|
---|
| 379 | mv -f $filelist.tmp $filelist
|
---|
| 380 | fi
|
---|
[2168] | 381 | done
|
---|
[747] | 382 | done
|
---|
[925] | 383 | $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
|
---|
[747] | 384 | mv -f $filelist.tmp $filelist
|
---|
| 385 | echo -e "$DONE"
|
---|
| 386 | }
|
---|
| 387 |
|
---|
| 388 |
|
---|
| 389 | FindAndAddUserKeyboardMappingFile() {
|
---|
| 390 | local r res mapfile mappath included_item included_list keyfile mp locale
|
---|
[3149] | 391 | LogAll "INFO: Analyzing your keyboard's configuration."
|
---|
[3231] | 392 | KEYDIR=/usr/lib/kbd
|
---|
[747] | 393 | [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
|
---|
[3347] | 394 | [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
|
---|
| 395 | [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
|
---|
[3231] | 396 | [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
|
---|
[747] | 397 | if [ ! -e "$KEYDIR" ] ; then
|
---|
[3149] | 398 | LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
|
---|
[747] | 399 | return 0
|
---|
[3569] | 400 | else
|
---|
| 401 | LogFile "INFO: KEYDIR=$KEYDIR"
|
---|
[747] | 402 | fi
|
---|
| 403 | if [ -e "/etc/sysconfig/keyboard" ] ; then
|
---|
[2963] | 404 | LogFile "INFO: Red Hat-style config detected."
|
---|
[747] | 405 | keyfile=/etc/sysconfig/keyboard
|
---|
[3257] | 406 | elif [ -e "/etc/vconsole.conf" ] ; then
|
---|
| 407 | LogFile "INFO: New Fedora style config detected."
|
---|
| 408 | keyfile=/etc/vconsole.conf
|
---|
[747] | 409 | elif [ -e "/etc/rc.d/rc.keymap" ] ; then
|
---|
[2963] | 410 | LogFile "INFO: Slackware-style config detected."
|
---|
[747] | 411 | keyfile=/etc/rc.d/rc.keymap
|
---|
| 412 | elif [ -e "/etc/rc.config" ] ; then
|
---|
[2963] | 413 | LogFile "INFO: Debian-style config detected."
|
---|
[747] | 414 | keyfile=/etc/rc.config
|
---|
| 415 | elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
|
---|
[2963] | 416 | LogFile "INFO: Debian-style config detected."
|
---|
[747] | 417 | mkdir -p $bigdir/tmp
|
---|
[3278] | 418 | echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
|
---|
[747] | 419 | KBDEPTH=0
|
---|
| 420 | mkdir -p $bigdir/etc/console
|
---|
[963] | 421 | cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
|
---|
[2864] | 422 | echo ""
|
---|
[747] | 423 | echo -e "$DONE"
|
---|
| 424 | return 0
|
---|
[2828] | 425 | elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
|
---|
[2963] | 426 | LogFile "INFO: Ubuntu-style config detected."
|
---|
[1713] | 427 | mkdir -p $bigdir/tmp
|
---|
[2828] | 428 | if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
|
---|
| 429 | kbdfile="/etc/console-setup/boottime.kmap.gz"
|
---|
| 430 | else
|
---|
| 431 | kbdfile="/etc/console-setup/cached.kmap.gz"
|
---|
| 432 | fi
|
---|
[3278] | 433 | echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
|
---|
[1713] | 434 | KBDEPTH=0
|
---|
| 435 | mkdir -p $bigdir/etc/console-setup
|
---|
[2828] | 436 | cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
|
---|
[2864] | 437 | echo ""
|
---|
[1713] | 438 | echo -e "$DONE"
|
---|
| 439 | return 0
|
---|
[3595] | 440 | elif [ -e "/etc/default/keyboard" ]; then
|
---|
| 441 | LogFile "INFO: New Debian-style config detected."
|
---|
| 442 | keyfile=/etc/default/keyboard
|
---|
[2744] | 443 | elif [ -e "/etc/rc.conf" ] ; then
|
---|
[2963] | 444 | LogFile "INFO: ArchLinux config detected."
|
---|
[2744] | 445 | keyfile=/etc/rc.conf
|
---|
[1465] | 446 | elif [ -e "/etc/conf.d/keymaps" ] ; then
|
---|
[2963] | 447 | LogFile "INFO: Gentoo-style config detected."
|
---|
[1465] | 448 | keyfile=/etc/conf.d/keymaps
|
---|
[3191] | 449 | elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
|
---|
| 450 | LogFile "INFO: X11-style config detected."
|
---|
| 451 | keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
|
---|
[747] | 452 | else
|
---|
[3149] | 453 | LogFile "Searching for rc.config ..."
|
---|
[747] | 454 | keyfile=`find /etc -name rc.config | head -n1`
|
---|
| 455 | if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
|
---|
[3149] | 456 | LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
|
---|
[747] | 457 | return
|
---|
| 458 | else
|
---|
[2963] | 459 | LogFile "INFO: Found $keyfile"
|
---|
[747] | 460 | fi
|
---|
| 461 | fi
|
---|
| 462 | if [ ! -e "$KEYDIR/keymaps" ] ; then
|
---|
[3149] | 463 | LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
|
---|
[747] | 464 | return
|
---|
| 465 | fi
|
---|
[2963] | 466 | LogFile "INFO: keyfile=$keyfile"
|
---|
[2999] | 467 | # For SLES we need to remove the .map.gz extension Cf #614
|
---|
| 468 | locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
|
---|
[747] | 469 | [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'` # Slackware
|
---|
[3595] | 470 | [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2` # Gentoo, ArchLinux & New fedora
|
---|
[3191] | 471 | [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'` # Fedora 19
|
---|
[3595] | 472 | [ ! "$locale" ] && locale=`grep -Ei 'XkbLayout' "$keyfile" | grep -v '^#' | cut -d= -f2 | tr -d '"'` # New Debian 8+
|
---|
[2963] | 473 | LogFile "INFO: locale=$locale"
|
---|
[1764] | 474 | #
|
---|
| 475 | # Process the keymaps dir once for all
|
---|
| 476 | # AddKeyboardMappingFile will use it recursively
|
---|
| 477 | #
|
---|
| 478 | find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
|
---|
| 479 | mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
|
---|
| 480 | [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
|
---|
[3571] | 481 | # For new distro such as RHEL 7 we need that additional search
|
---|
| 482 | [ ! "$mp" ] && mp=`grep "xkb" $MINDI_TMP/keymaps.find | grep -E "/$locale\." | grep -vx " *#.*"`
|
---|
[747] | 483 | # If we have multiple keymaps then log it !!
|
---|
[3149] | 484 | echo "$mp" | grep -q " " >> $LOGFILE
|
---|
[747] | 485 | if [ $? -eq 0 ]; then
|
---|
[2963] | 486 | LogAll "WARNING: Multiple keymaps found: $mp"
|
---|
| 487 | LogFile "INFO: The following one will be used"
|
---|
[747] | 488 | fi
|
---|
| 489 | for i in $mp ; do
|
---|
| 490 | mappath=$i
|
---|
| 491 | [ -e "$i" ] && [ ! -d "$i" ] && break
|
---|
| 492 | done
|
---|
| 493 | if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
|
---|
[3688] | 494 | mappath=$(find /usr /lib /lib64 -path "*/kbd/keymaps/*/$locale | head -1")
|
---|
[747] | 495 | fi
|
---|
[2963] | 496 | LogFile "INFO: mappath = $mappath"
|
---|
[747] | 497 | if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
|
---|
[3149] | 498 | LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
|
---|
[747] | 499 | return
|
---|
| 500 | fi
|
---|
[3535] | 501 | echo -en "INFO: Adding keyboard mapping tables"
|
---|
[747] | 502 | mkdir -p $bigdir/tmp
|
---|
[3278] | 503 | echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
|
---|
[2055] | 504 | KBDEPTH=0
|
---|
[747] | 505 | AddKeyboardMappingFile $mappath
|
---|
| 506 | echo -e "$DONE"
|
---|
[1764] | 507 | rm -f $MINDI_TMP/keymaps.find
|
---|
[747] | 508 | return 0
|
---|
| 509 | }
|
---|
| 510 |
|
---|
| 511 |
|
---|
[3241] | 512 | FindLdlinux32Binary() {
|
---|
| 513 | LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
|
---|
| 514 | [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
|
---|
| 515 | [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
|
---|
| 516 | [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
|
---|
| 517 | [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
|
---|
[3303] | 518 | [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
|
---|
| 519 | [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
|
---|
[3241] | 520 | #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
|
---|
| 521 | if [ ! -e "$LDLINUXC32" ]; then
|
---|
| 522 | LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
|
---|
| 523 | LDLINUXC32=/tmp/idoesnthopefullyexist
|
---|
| 524 | else
|
---|
| 525 | LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
|
---|
| 526 | fi
|
---|
| 527 | }
|
---|
| 528 |
|
---|
| 529 |
|
---|
[2629] | 530 | FindMboot32Binary() {
|
---|
| 531 | MBOOTC32=/usr/lib/syslinux/mboot.c32
|
---|
| 532 | [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
|
---|
| 533 | [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
|
---|
| 534 | [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
|
---|
| 535 | [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
|
---|
[3303] | 536 | [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
|
---|
| 537 | [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
|
---|
[2629] | 538 | [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
|
---|
[2921] | 539 | [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
|
---|
[2963] | 540 | LogFile "INFO: Found mboot.c32 at $MBOOTC32"
|
---|
[2629] | 541 | }
|
---|
| 542 |
|
---|
[3476] | 543 | FindLdlinuxe64Binary() {
|
---|
| 544 | LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
|
---|
| 545 | [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
|
---|
| 546 | [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
|
---|
| 547 | [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
|
---|
| 548 | [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
|
---|
| 549 | [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
|
---|
| 550 | [ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 | grep -x "/.*/ldlinux.e64"`
|
---|
| 551 | [ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
|
---|
| 552 | LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
|
---|
| 553 | }
|
---|
| 554 |
|
---|
| 555 | FindSyslinux64EFI() {
|
---|
| 556 | SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
|
---|
| 557 | [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
|
---|
| 558 | [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
|
---|
| 559 | [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
|
---|
| 560 | [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
|
---|
| 561 | [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
|
---|
| 562 | [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi | grep -x "/.*64/syslinux.efi"`
|
---|
[3491] | 563 | [ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
|
---|
[3476] | 564 | LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
|
---|
| 565 | }
|
---|
| 566 |
|
---|
[747] | 567 | FindIsolinuxBinary() {
|
---|
| 568 | ISOLINUX=/usr/lib/isolinux.bin
|
---|
| 569 | [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
|
---|
[1491] | 570 | [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
|
---|
[747] | 571 | [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
|
---|
| 572 | [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
|
---|
[1491] | 573 | [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
|
---|
[3304] | 574 | [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
|
---|
[1854] | 575 | [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
|
---|
[2921] | 576 | [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
|
---|
[2963] | 577 | LogFile "INFO: Found isolinux.bin at $ISOLINUX"
|
---|
[747] | 578 | }
|
---|
| 579 |
|
---|
| 580 |
|
---|
| 581 | GenerateGiantDependencyList() {
|
---|
[3522] | 582 | local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item tempdepfile modres noof_lines lvmversion lvmresolved
|
---|
[747] | 583 |
|
---|
[3522] | 584 | echo -en "INFO: Analyzing dependency requirements"
|
---|
[747] | 585 | outfile=$1
|
---|
[940] | 586 | tempfile=$MINDI_TMP/$$.txt
|
---|
[747] | 587 | incoming=`ReadLine`
|
---|
| 588 |
|
---|
| 589 | > $tempfile
|
---|
| 590 | progress=0
|
---|
| 591 | res=0
|
---|
| 592 | noof_lines=$2
|
---|
| 593 | while [ "$incoming" != "" ] ; do
|
---|
[861] | 594 | if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
|
---|
| 595 | incoming=`ReadLine`
|
---|
| 596 | continue
|
---|
| 597 | fi
|
---|
| 598 | if [ "$incoming" = "LVMFILES:" ] ; then
|
---|
| 599 | break
|
---|
| 600 | fi
|
---|
[747] | 601 | filelist=`GenerateListForFile "$incoming"`
|
---|
| 602 | r=$?
|
---|
[3149] | 603 | [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
|
---|
[747] | 604 | res=$(($res+$r))
|
---|
[2963] | 605 | # LogFile "INFO: '$incoming' generates filelist '$filelist'"
|
---|
[747] | 606 | for fname in $filelist ; do
|
---|
[3321] | 607 | [ "$fname" != "" ] && echo "$fname" >> $tempfile
|
---|
[747] | 608 | done
|
---|
| 609 | progress=$(($progress+1))
|
---|
[3149] | 610 | LogProgress $progress $noof_lines
|
---|
[747] | 611 | incoming=`ReadLine`
|
---|
| 612 | done
|
---|
[861] | 613 | if [ "$incoming" = "LVMFILES:" ] ; then
|
---|
| 614 | incoming=`ReadLine`
|
---|
| 615 | lvmversion=""
|
---|
| 616 | while [ "$incoming" != "" ] ; do
|
---|
| 617 | if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
|
---|
| 618 | incoming=`ReadLine`
|
---|
| 619 | continue
|
---|
| 620 | fi
|
---|
| 621 | filelist=`GenerateListForFile "$incoming"`
|
---|
| 622 | for tool in $filelist ; do
|
---|
[3662] | 623 | lvmresolved=`readlink -f $tool`
|
---|
| 624 | if [ "$tool" = "$lvmresolved" ]; then
|
---|
| 625 | echo "$tool" >> $tempfile
|
---|
| 626 | elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
|
---|
| 627 | if [ "$lvmversion" = "" ] ; then
|
---|
| 628 | lvmversion=`$lvmresolved`
|
---|
| 629 | echo "$lvmresolved" >> $tempfile
|
---|
| 630 | fi
|
---|
| 631 | toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
|
---|
| 632 | if [ "$lvmversion" = "200" ]; then
|
---|
| 633 | # pvdata and lvmcreate_initrd don't exist in LVM2
|
---|
| 634 | case "$toolstripped" in
|
---|
| 635 | "pvdata")
|
---|
[861] | 636 | continue
|
---|
| 637 | ;;
|
---|
[3662] | 638 | "lvmcreate_initrd")
|
---|
[861] | 639 | continue
|
---|
| 640 | ;;
|
---|
| 641 | esac
|
---|
[3662] | 642 | fi
|
---|
| 643 | toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
|
---|
| 644 | if [ -e "$toolpath" ] ; then
|
---|
[861] | 645 | echo "$toolpath" >> $tempfile
|
---|
| 646 | echo "$tool" >> $tempfile
|
---|
[3662] | 647 | else
|
---|
[861] | 648 | toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
|
---|
[3662] | 649 | fi
|
---|
| 650 | if [ -e "$toolpath" ] ; then
|
---|
| 651 | echo "$toolpath" >> $tempfile
|
---|
| 652 | echo "$tool" >> $tempfile
|
---|
[861] | 653 | else
|
---|
[3662] | 654 | echo "Where are your LVM-Tools? Couldn't find $tool"
|
---|
| 655 | fi
|
---|
| 656 | else
|
---|
[861] | 657 | echo "$tool" >> $tempfile
|
---|
| 658 | fi
|
---|
| 659 | done
|
---|
| 660 | progress=$(($progress+1))
|
---|
[3149] | 661 | LogProgress $progress $noof_lines
|
---|
[861] | 662 | incoming=`ReadLine`
|
---|
| 663 | done
|
---|
[747] | 664 | fi
|
---|
[3661] | 665 | echo -e "$DONE"
|
---|
[747] | 666 |
|
---|
[3661] | 667 | echo -en "INFO: Making complete dependency list..."
|
---|
[747] | 668 | tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
|
---|
| 669 | mv -f $tempfile.new $tempfile
|
---|
| 670 | > $outfile.pre
|
---|
| 671 | progress=0
|
---|
| 672 | noof_lines=`cat $tempfile | wc -l`
|
---|
[2963] | 673 | LogFile "---------------------------------"
|
---|
| 674 | LogFile "List of dependencies: "
|
---|
| 675 | LogFile "---------------------------------"
|
---|
[747] | 676 | for fname in `cat $tempfile` ; do
|
---|
[1876] | 677 | echo "$fname" | tee -a $LOGFILE >> $outfile.pre
|
---|
| 678 | LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
|
---|
[925] | 679 | progress=$(($progress+1))
|
---|
[3149] | 680 | LogProgress $progress $noof_lines
|
---|
[747] | 681 | done
|
---|
[1684] | 682 | if [ _"$MONDO_SHARE" != _"" ]; then
|
---|
[925] | 683 | mkdir -p $bigdir/tmp
|
---|
[3172] | 684 | mkdir -p $bigdir/usr/bin
|
---|
[940] | 685 | if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
|
---|
[3149] | 686 | LogAll "\nINFO: Incorporating post-nuke tarball"
|
---|
[3522] | 687 | (cd "$bigdir" ; tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log)
|
---|
[747] | 688 | fi
|
---|
[963] | 689 | if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
|
---|
[3661] | 690 | LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
|
---|
[925] | 691 | else
|
---|
[3565] | 692 | LogAll "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
|
---|
| 693 | LogAll " I bet you've got a spare copy of Mondo or Mindi floating around on your system."
|
---|
[3661] | 694 | LogAll " If Mindi was called by Mondo then send a bug report."
|
---|
[3565] | 695 | LogAll " It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
|
---|
| 696 | LogAll " Finally, run Mindi again."
|
---|
[3661] | 697 | Die "Odd."
|
---|
[925] | 698 | fi
|
---|
[3565] | 699 | cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogAll "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
|
---|
[3270] | 700 | if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
|
---|
[3149] | 701 | LogAll "\nINFO: Incorporating Network-related settings"
|
---|
[3278] | 702 | for r in NETFS-* ; do
|
---|
[963] | 703 | cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
|
---|
[2963] | 704 | LogFile "INFO: Copying $r to ramdisk"
|
---|
[925] | 705 | done
|
---|
| 706 | fi
|
---|
[747] | 707 | fi
|
---|
[925] | 708 | tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
|
---|
[747] | 709 | rm -f $tempfile $outfile.pre
|
---|
[3661] | 710 | [ "$res" -eq "0" ] && echo -e "$DONE" || echo "\nFailed."
|
---|
[747] | 711 | return $res
|
---|
| 712 | }
|
---|
| 713 |
|
---|
| 714 |
|
---|
| 715 | GenerateListForFile() {
|
---|
[3692] | 716 | local files_found fname incoming
|
---|
[747] | 717 | incoming="$1"
|
---|
| 718 | files_found=""
|
---|
| 719 |
|
---|
| 720 | for fname in $incoming ; do
|
---|
| 721 | files_found="$files_found `LocateFile $fname`"
|
---|
| 722 | done
|
---|
| 723 |
|
---|
| 724 | echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
|
---|
| 725 | }
|
---|
| 726 |
|
---|
| 727 |
|
---|
| 728 | # Returns all disk devices which are part of a raid array
|
---|
| 729 | GetAllRaidMembers() {
|
---|
| 730 | $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
|
---|
| 731 | }
|
---|
| 732 |
|
---|
| 733 |
|
---|
| 734 | GetFileSizeList() {
|
---|
| 735 | local i
|
---|
| 736 | for i in `find $1 -type d -o -print` ; do
|
---|
| 737 | du -sk $i
|
---|
| 738 | done
|
---|
| 739 | }
|
---|
| 740 |
|
---|
| 741 |
|
---|
[1230] | 742 | # Check kernel filesystem capabilites for accessing initrd image
|
---|
[2429] | 743 | # Could be ext2 FS (old mode) or initramfs (new mode)
|
---|
[1230] | 744 | #
|
---|
| 745 | # Interface definition:
|
---|
| 746 | # param #1: absolute path to kernel image
|
---|
| 747 | GetInitrdFilesystemToUse() {
|
---|
| 748 |
|
---|
| 749 | # interface test: make sure we have one parameter
|
---|
| 750 | if [ $# -ne 1 ]; then
|
---|
| 751 | Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
|
---|
| 752 | fi
|
---|
| 753 |
|
---|
| 754 | # interface parameters
|
---|
| 755 | local lvKernelImage=$1
|
---|
| 756 |
|
---|
| 757 | # local constants (filesystem magic strings)
|
---|
| 758 | local lcMagicCramfs="<3>cramfs: wrong magic"
|
---|
[2047] | 759 | local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
|
---|
[2390] | 760 | local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
|
---|
[3353] | 761 | local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|[<]*6[>]*Trying to unpack rootfs image as initramfs"
|
---|
[1230] | 762 |
|
---|
| 763 | # local variables
|
---|
| 764 | local lvOffset
|
---|
| 765 | local lvScanRes
|
---|
| 766 | local lvUseFilesystem
|
---|
| 767 |
|
---|
| 768 | # say where we are.
|
---|
[3111] | 769 | LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
|
---|
[1230] | 770 |
|
---|
| 771 | # verify that file exists
|
---|
| 772 | [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
|
---|
| 773 |
|
---|
[3111] | 774 | # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
|
---|
[1730] | 775 | file $lvKernelImage 2>&1 | grep -q gzip
|
---|
[1566] | 776 | if [ $? -eq 0 ]; then
|
---|
[3111] | 777 | LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
|
---|
| 778 | lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
|
---|
| 779 | else
|
---|
| 780 | LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
|
---|
| 781 | # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
|
---|
| 782 | # get offet of gzip magic "1f8b0800" in file (for these older kernels)
|
---|
| 783 | lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
|
---|
| 784 | if [ $lvOffset -eq 0 ]; then
|
---|
| 785 | LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
|
---|
| 786 | lvScanRes=$lcMagicInitfs
|
---|
[2393] | 787 | else
|
---|
[3111] | 788 | lvOffset=`expr $lvOffset / 2`
|
---|
| 789 | LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
|
---|
| 790 | # scan again kernel image
|
---|
| 791 | lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
|
---|
[2393] | 792 | fi
|
---|
[3111] | 793 | fi
|
---|
[2393] | 794 |
|
---|
[3111] | 795 | # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
|
---|
| 796 | if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
|
---|
| 797 | lvUseFilesystem="ext2fs"
|
---|
| 798 | elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
|
---|
| 799 | lvUseFilesystem="ext3fs"
|
---|
| 800 | elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
|
---|
| 801 | lvUseFilesystem="initramfs"
|
---|
| 802 | elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
|
---|
| 803 | lvUseFilesystem="cramfs"
|
---|
[2429] | 804 | else
|
---|
[3111] | 805 | # In that case, we are most probably after 2.6.30 and use the supported initramfs
|
---|
[3181] | 806 | LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
|
---|
| 807 | LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
|
---|
| 808 | LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
|
---|
[1230] | 809 | lvUseFilesystem="initramfs"
|
---|
| 810 | fi
|
---|
[3111] | 811 |
|
---|
[1230] | 812 | # say what we are using
|
---|
[3111] | 813 | LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
|
---|
[1230] | 814 |
|
---|
| 815 | # return file system to use
|
---|
| 816 | echo "$lvUseFilesystem"
|
---|
| 817 |
|
---|
| 818 | }
|
---|
| 819 |
|
---|
[747] | 820 | # Searches members of raid device
|
---|
| 821 | # $1: raid device (/dev/md...)
|
---|
| 822 | GetRaidDevMembers() {
|
---|
[2917] | 823 | if [ ! -f /etc/raidtab ]; then
|
---|
| 824 | return
|
---|
| 825 | fi
|
---|
[747] | 826 | $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
|
---|
| 827 | }
|
---|
| 828 |
|
---|
| 829 |
|
---|
| 830 | ListAllPartitions() {
|
---|
[3702] | 831 | grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}' | sort -u
|
---|
[747] | 832 | [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
|
---|
[1824] | 833 | if [ -e "/vmfs/volumes" ]; then
|
---|
| 834 | # For VMWare ESX 3 get the device names of these volumes
|
---|
[2431] | 835 | vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
|
---|
[1824] | 836 | fi
|
---|
[747] | 837 | return
|
---|
| 838 | }
|
---|
| 839 |
|
---|
| 840 |
|
---|
| 841 | ListKernelModulePaths() {
|
---|
[2583] | 842 | local module_list module fname r kern
|
---|
[1399] | 843 | module_list="$MODULES"
|
---|
[1230] | 844 | # Remove unwanted modules from list
|
---|
| 845 | for i in $DENY_MODS; do
|
---|
| 846 | module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
|
---|
| 847 | done
|
---|
[747] | 848 | ###
|
---|
| 849 | ### Sq-Modification ... Use kernelname for module search path if specified
|
---|
| 850 | ###
|
---|
[3231] | 851 | if [ "${kernelname}" != "" ]
|
---|
[747] | 852 | then
|
---|
| 853 | kern=${kernelname}
|
---|
| 854 | else
|
---|
[2292] | 855 | kern="$KERVERRUN"
|
---|
[747] | 856 | fi
|
---|
[2292] | 857 | export KERVER=$kern
|
---|
[747] | 858 | ###
|
---|
| 859 | ### Sq-Mod End
|
---|
| 860 | ###
|
---|
[3310] | 861 | # Get rid of duplicates
|
---|
| 862 | for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do
|
---|
[747] | 863 | r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
|
---|
[2471] | 864 | if [ -z "$r" ]; then
|
---|
| 865 | if [ "`echo "$MODULES" | grep -w $module`" ]; then
|
---|
| 866 | r="[live module file not found]"
|
---|
| 867 | else
|
---|
| 868 | r="[extra module file not found]"
|
---|
| 869 | fi
|
---|
[2583] | 870 | else
|
---|
| 871 | [ -f "$r" ] && echo "$r"
|
---|
[2471] | 872 | fi
|
---|
[2963] | 873 | LogFile "INFO: module $module --> $r"
|
---|
[747] | 874 | done
|
---|
| 875 | find /lib/modules/$kern/modules.* -type f 2> /dev/null
|
---|
| 876 | }
|
---|
| 877 |
|
---|
[1784] | 878 | #
|
---|
| 879 | # Critical function which computes all dependencies (dyn. lib.)
|
---|
| 880 | # for a list of binaries
|
---|
| 881 | #
|
---|
[747] | 882 | LocateDeps() {
|
---|
| 883 | local incoming fname deps
|
---|
[1724] | 884 | incoming="$*"
|
---|
[3231] | 885 | deps=""
|
---|
| 886 |
|
---|
[747] | 887 | for fname in $incoming ; do
|
---|
| 888 | if [ ! -e "$fname" ] ; then
|
---|
[3661] | 889 | LogFile "WARNING: $fname does not exist; cannot be LDD'd."
|
---|
[747] | 890 | if echo $fname | grep lvm &> /dev/null ; then
|
---|
[2963] | 891 | LogFile " This warning only affects you if you are using LVM."
|
---|
[1399] | 892 | if echo "$MODULES" | grep lvm &> /dev/null ; then
|
---|
[3231] | 893 | LogFile " I think you are, so please take heed!"
|
---|
[747] | 894 | else
|
---|
[3231] | 895 | LogFile " I don't think you are, so don't worry about it."
|
---|
[747] | 896 | fi
|
---|
| 897 | fi
|
---|
| 898 | else
|
---|
[3231] | 899 | deps="$deps $fname"
|
---|
[747] | 900 | fi
|
---|
| 901 | done
|
---|
[3692] | 902 | mr-read-all-link `mr-process-ldd $deps | sort -u` $deps | sort -u
|
---|
[747] | 903 | }
|
---|
| 904 |
|
---|
[925] | 905 |
|
---|
[747] | 906 | LocateFile() {
|
---|
[3692] | 907 | local j dn newdn bn path fname_to_find output
|
---|
[747] | 908 | fname_to_find="$1"
|
---|
[1526] | 909 | # It's an absolute path
|
---|
[3231] | 910 | j=`echo "$fname_to_find" | cut -c1`
|
---|
| 911 | if [ _"$j" = _"/" ]; then
|
---|
| 912 | dn=`dirname $fname_to_find`
|
---|
| 913 | # We suppose that the link is already included, just add the new file
|
---|
| 914 | if [ -h "$dn" ]; then
|
---|
| 915 | newdn=`readlink -f $dn`
|
---|
| 916 | bn=`basename $fname_to_find`
|
---|
| 917 | output="$newdn/$bn"
|
---|
| 918 | else
|
---|
| 919 | output="$fname_to_find"
|
---|
| 920 | fi
|
---|
[860] | 921 | if [ -h "$output" ] ; then
|
---|
[3231] | 922 | output="`mr-read-all-link $output` $output"
|
---|
[860] | 923 | fi
|
---|
[859] | 924 | echo "$output"
|
---|
| 925 | return 0
|
---|
[747] | 926 | fi
|
---|
[1526] | 927 | # It's not an absolute path
|
---|
[747] | 928 | output=""
|
---|
[1526] | 929 | for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
|
---|
| 930 | #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
|
---|
| 931 | [ -h "$path" ] && continue
|
---|
| 932 | [ ! -e "$path/$fname_to_find" ] && continue
|
---|
| 933 | output="$path/$fname_to_find $output"
|
---|
| 934 | if [ -h "$path/$fname_to_find" ] ; then
|
---|
[3231] | 935 | output="`mr-read-all-link $path/$fname_to_find` $output"
|
---|
[1526] | 936 | fi
|
---|
[747] | 937 | done
|
---|
| 938 | if [ "$output" = "" ] ; then
|
---|
[860] | 939 | return 1
|
---|
[747] | 940 | fi
|
---|
| 941 | echo "$output"
|
---|
| 942 | return 0
|
---|
| 943 | }
|
---|
| 944 |
|
---|
[3149] | 945 | LogProgress() {
|
---|
[3293] | 946 | local i progress modres noof_lines title
|
---|
[3149] | 947 |
|
---|
| 948 | progress=$1
|
---|
| 949 | noof_lines=$2
|
---|
[3293] | 950 | title=$3
|
---|
[747] | 951 |
|
---|
[3149] | 952 | i=$(($progress*100))
|
---|
| 953 | if [ $noof_lines -ne 0 ]; then
|
---|
| 954 | i=$(($i/$noof_lines))
|
---|
| 955 | else
|
---|
| 956 | i=0
|
---|
| 957 | fi
|
---|
[3293] | 958 |
|
---|
| 959 | if [ _"$MONDO_SHARE" != _"" ]; then
|
---|
| 960 | echo "$title $i%"
|
---|
| 961 | else
|
---|
| 962 | echo -en "\r\t\t\t\t\t\t\t\t"
|
---|
| 963 | echo -en "$i"
|
---|
| 964 | echo -en "%"
|
---|
| 965 | modres=$(($progress%4))
|
---|
| 966 | [ "$modres" -eq "0" ] && echo -en "\t/"
|
---|
| 967 | [ "$modres" -eq "1" ] && echo -en "\t-"
|
---|
| 968 | [ "$modres" -eq "2" ] && echo -en "\t\\"
|
---|
| 969 | [ "$modres" -eq "3" ] && echo -en "\t|"
|
---|
| 970 | fi
|
---|
[3149] | 971 | }
|
---|
| 972 |
|
---|
[3692] | 973 | # Called by PrepareTargetDir, to make /tmp/$MRCFG
|
---|
[747] | 974 | MakeMondoConfigFile() {
|
---|
[3692] | 975 | local outfile use_lzo use_comp use_star use_gzip use_lzma
|
---|
[747] | 976 | outfile=$1
|
---|
| 977 | > $outfile
|
---|
| 978 | [ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
|
---|
| 979 | [ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
|
---|
[1698] | 980 | [ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
|
---|
[747] | 981 | [ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
|
---|
| 982 | [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
|
---|
| 983 | [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
|
---|
| 984 | use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
|
---|
[998] | 985 | use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
|
---|
[3149] | 986 | use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
|
---|
[747] | 987 | use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
|
---|
| 988 | use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
|
---|
| 989 | echo "use-lzo $use_lzo" >> $outfile
|
---|
[998] | 990 | echo "use-gzip $use_gzip" >> $outfile
|
---|
[747] | 991 | echo "use-star $use_star" >> $outfile
|
---|
[3149] | 992 | echo "use-lzma $use_lzma" >> $outfile
|
---|
[747] | 993 | echo "use-comp $use_comp" >> $outfile
|
---|
[3397] | 994 | echo "boot-type $BOOT_TYPE" >> $outfile
|
---|
[747] | 995 | echo "datestamp `date`" >> $outfile
|
---|
| 996 | [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
|
---|
[940] | 997 | AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
|
---|
| 998 | AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
|
---|
| 999 | AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
|
---|
[3278] | 1000 | AddFileToCfgIfExists $MINDI_TMP/ISO-DIR iso-dir $outfile
|
---|
[940] | 1001 | AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
|
---|
| 1002 | AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
|
---|
[3278] | 1003 | AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER bootloader.ver $outfile
|
---|
[940] | 1004 | AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
|
---|
| 1005 | AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
|
---|
| 1006 | AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
|
---|
[3278] | 1007 | AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
|
---|
| 1008 | AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
|
---|
| 1009 | AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
|
---|
| 1010 |
|
---|
[3270] | 1011 | # Deal with network configuration in a portable way
|
---|
| 1012 | if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
|
---|
| 1013 | mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
|
---|
[3705] | 1014 | if [ $? -ne 0 ]; then
|
---|
| 1015 | Die "mr-net-get-config didn't execute correctly. Check dependencies, probably the perl Net::IPv4Addr module is missing"
|
---|
| 1016 | fi
|
---|
[3270] | 1017 | fi
|
---|
[747] | 1018 | }
|
---|
| 1019 |
|
---|
[2618] | 1020 | # Get PV's for an LV
|
---|
| 1021 | GetPVsForLV() {
|
---|
[3692] | 1022 | local vg
|
---|
| 1023 |
|
---|
[3368] | 1024 | if [ -n "$1" ]; then
|
---|
| 1025 | vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
|
---|
| 1026 | if [ -z "$vg" ]; then
|
---|
| 1027 | return
|
---|
| 1028 | fi
|
---|
| 1029 | $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
|
---|
| 1030 | fi
|
---|
[2618] | 1031 | }
|
---|
[747] | 1032 |
|
---|
[2618] | 1033 |
|
---|
[747] | 1034 | MakeMountlist() {
|
---|
[2907] | 1035 | local mountlist all_partitions current_partition \
|
---|
[747] | 1036 | partition_size partition_format outstring partition_number \
|
---|
| 1037 | partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
|
---|
[2013] | 1038 | absolute_partition old_partition_fmt current_lvolume uname skip
|
---|
[747] | 1039 |
|
---|
[3149] | 1040 | LogFile "------------------------------------"
|
---|
[3522] | 1041 | LogFile "INFO: Your raw fstab file looks like this:"
|
---|
[2963] | 1042 | LogFile "------------------------------------"
|
---|
[747] | 1043 | cat $MY_FSTAB >> $LOGFILE
|
---|
[3149] | 1044 | LogAll "-----------------------------------"
|
---|
[3522] | 1045 | LogAll "INFO: Your mountlist will look like this:"
|
---|
[3149] | 1046 | LogAll "-----------------------------------"
|
---|
[747] | 1047 |
|
---|
[2907] | 1048 | # mountlist(OUT)
|
---|
[747] | 1049 | mountlist=$1
|
---|
| 1050 |
|
---|
| 1051 | # NB: partition = device
|
---|
| 1052 | # NB: mountpt = where the device is mounted
|
---|
| 1053 |
|
---|
| 1054 | [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
|
---|
| 1055 |
|
---|
[3565] | 1056 | [ "$mountlist" != "" ] && [ "$mountlist" != "/" ] && rm -Rf $mountlist
|
---|
[747] | 1057 | > $mountlist
|
---|
| 1058 | all_partitions=""
|
---|
| 1059 |
|
---|
| 1060 | if [ $LVM != "false" ]; then
|
---|
[3499] | 1061 | LogFile "INFO: Analyzing LVM..."
|
---|
[968] | 1062 | $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
|
---|
[971] | 1063 | if [ $? -ne 0 ]; then
|
---|
[963] | 1064 | LVM="false"
|
---|
| 1065 | fi
|
---|
[2536] | 1066 | # Excluded LVs and GVs are not reported here
|
---|
[2424] | 1067 | all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
|
---|
[747] | 1068 | fi
|
---|
| 1069 | all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
|
---|
| 1070 | for i in $IMAGE_DEVS ; do
|
---|
| 1071 | mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
|
---|
| 1072 | done
|
---|
| 1073 | [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
|
---|
[3149] | 1074 | printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
|
---|
| 1075 | printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------ ------- ---------- | tee -a $LOGFILE
|
---|
[3028] | 1076 | useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
|
---|
[747] | 1077 | for c_p in $all_partitions ; do
|
---|
[3702] | 1078 | # Skip fd/cd devices, network FS, cifs, brtfs subvols
|
---|
[2452] | 1079 | [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
|
---|
[747] | 1080 | [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
|
---|
| 1081 | if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
|
---|
[861] | 1082 | current_partition=`readlink -f $c_p`
|
---|
[3046] | 1083 | if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
|
---|
| 1084 | current_partition="$c_p"
|
---|
| 1085 | elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
|
---|
[3059] | 1086 | # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
|
---|
[3066] | 1087 | current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
|
---|
[3046] | 1088 | fi
|
---|
[747] | 1089 | [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
|
---|
| 1090 | else
|
---|
| 1091 | current_partition="$c_p"
|
---|
| 1092 | fi
|
---|
| 1093 | [ "$c_p" = "none" ] && continue
|
---|
[3702] | 1094 |
|
---|
[747] | 1095 | redhat_label=""
|
---|
[1831] | 1096 | label=""
|
---|
[957] | 1097 | uuid=""
|
---|
[861] | 1098 | absolute_partition=`readlink -f $c_p`
|
---|
[2965] | 1099 | partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
|
---|
[747] | 1100 |
|
---|
[1986] | 1101 | # set default in case we dont't find it
|
---|
| 1102 | str_to_find_fmt_with=$current_partition
|
---|
| 1103 |
|
---|
[747] | 1104 | # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
|
---|
| 1105 | # current_partition contains only first column of /etc/fstab
|
---|
[2965] | 1106 | if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
|
---|
[980] | 1107 | redhat_label=`echo "$current_partition" | cut -d'=' -f2`
|
---|
[747] | 1108 | actual_dev=""
|
---|
[853] | 1109 |
|
---|
| 1110 | # 1st try, findfs - the RHEL way of finding labels and their partitions
|
---|
| 1111 | if [ -x "/sbin/findfs" ]; then
|
---|
[2847] | 1112 | actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
|
---|
[853] | 1113 | fi
|
---|
[747] | 1114 |
|
---|
[853] | 1115 | # 2nd try : blkid, the good way for all LABEL except swap
|
---|
| 1116 | if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
|
---|
[2965] | 1117 | actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
|
---|
[747] | 1118 | # For LVM FS it will give a /dev/dm-# which should then be converted
|
---|
[748] | 1119 | if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
|
---|
[963] | 1120 | major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
|
---|
| 1121 | minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
|
---|
[747] | 1122 | for dev in `ls /dev/mapper/*`; do
|
---|
[963] | 1123 | major1=`/bin/ls -l $dev | $AWK '{print $5}'`
|
---|
| 1124 | minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
|
---|
[747] | 1125 | if [ $major1 = $major ] && [ $minor1 = $minor ]; then
|
---|
[963] | 1126 | actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
|
---|
[747] | 1127 | break
|
---|
| 1128 | fi
|
---|
| 1129 | done
|
---|
| 1130 | fi
|
---|
| 1131 | fi
|
---|
| 1132 |
|
---|
[853] | 1133 | # 3rd try, which works on a standard partition (ext2/3), but not on swap
|
---|
[747] | 1134 | # For LVM gives a /dev/mapper entry
|
---|
| 1135 | if [ "x$actual_dev" = "x" ]; then
|
---|
[2965] | 1136 | actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
|
---|
[747] | 1137 | fi
|
---|
| 1138 |
|
---|
[853] | 1139 | # 4th try, with vol_id
|
---|
[747] | 1140 | # SWAP only
|
---|
| 1141 | if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
|
---|
[2965] | 1142 | list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
|
---|
[747] | 1143 | for dev_swap in $list_swaps ; do
|
---|
[2965] | 1144 | dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
|
---|
[747] | 1145 | if [ "x$dev_exists" != "x" ]; then
|
---|
| 1146 | actual_dev=$dev_swap
|
---|
| 1147 | break;
|
---|
| 1148 | fi
|
---|
| 1149 | done
|
---|
| 1150 | fi
|
---|
| 1151 |
|
---|
[853] | 1152 | # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
|
---|
[789] | 1153 | # LABEL=SW-cciss/c0d0p3 (RDP)
|
---|
[853] | 1154 | # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
|
---|
[747] | 1155 | # SWAP only
|
---|
[2965] | 1156 | if [ "x$actual_dev" = "x" -a _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
|
---|
[2013] | 1157 | skip=""
|
---|
[2292] | 1158 | uname=$KERVERRUN
|
---|
[2013] | 1159 | [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
|
---|
| 1160 | # 2.6.12 needs 16 (FC3)
|
---|
| 1161 | [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
|
---|
| 1162 | # 2.6.19 and upper needs 1052
|
---|
| 1163 | [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
|
---|
| 1164 | [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
|
---|
[2892] | 1165 | [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
|
---|
[2013] | 1166 | if [ $skip = "" ]; then
|
---|
| 1167 | Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
|
---|
| 1168 | fi
|
---|
[853] | 1169 | for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
|
---|
| 1170 | do
|
---|
| 1171 | # Location of the swap label for kernel 2.6
|
---|
[2013] | 1172 | try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
|
---|
[853] | 1173 | if [ "x$try_dev_label" = "x$redhat_label" ]; then
|
---|
[855] | 1174 | actual_dev=$try_dev
|
---|
[853] | 1175 | fi
|
---|
| 1176 | done
|
---|
[747] | 1177 | fi
|
---|
[1008] | 1178 |
|
---|
| 1179 | # Check if one of all those tries has known success
|
---|
| 1180 | if [ "x$actual_dev" != "x" ]; then
|
---|
| 1181 | current_partition=$actual_dev
|
---|
| 1182 | else
|
---|
[1885] | 1183 | Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
|
---|
[1008] | 1184 | fi
|
---|
[957] | 1185 | # This part tries to retrieve the correct device from a UUID line in /etc/fstab
|
---|
| 1186 | # current_partition contains only first column of /etc/fstab
|
---|
[2965] | 1187 | elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
|
---|
[980] | 1188 | uuid=`echo "$current_partition" | cut -d'=' -f2`
|
---|
[957] | 1189 | actual_dev=""
|
---|
| 1190 |
|
---|
| 1191 | # 1st try, findfs - the RHEL way of finding labels and their partitions
|
---|
| 1192 | if [ -x "/sbin/findfs" ]; then
|
---|
| 1193 | actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
|
---|
| 1194 | fi
|
---|
| 1195 |
|
---|
[1531] | 1196 | # 2nd try : blkid, the good way for all UUID except swap
|
---|
[957] | 1197 | if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
|
---|
[2965] | 1198 | actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
|
---|
[957] | 1199 | # For LVM FS it will give a /dev/dm-# which should then be converted
|
---|
| 1200 | if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
|
---|
[963] | 1201 | major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
|
---|
| 1202 | minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
|
---|
[957] | 1203 | for dev in `ls /dev/mapper/*`; do
|
---|
[963] | 1204 | major1=`/bin/ls -l $dev | $AWK '{print $5}'`
|
---|
| 1205 | minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
|
---|
[957] | 1206 | if [ $major1 = $major ] && [ $minor1 = $minor ]; then
|
---|
[963] | 1207 | actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
|
---|
[957] | 1208 | break
|
---|
| 1209 | fi
|
---|
| 1210 | done
|
---|
| 1211 | fi
|
---|
| 1212 | fi
|
---|
| 1213 |
|
---|
| 1214 | # 3th try, with vol_id
|
---|
| 1215 | if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
|
---|
[2965] | 1216 | list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
|
---|
[957] | 1217 | for dev in $list_dev ; do
|
---|
[2965] | 1218 | dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
|
---|
[957] | 1219 | if [ "x$dev_exists" != "x" ]; then
|
---|
| 1220 | actual_dev=$dev
|
---|
| 1221 | break;
|
---|
| 1222 | fi
|
---|
| 1223 | done
|
---|
| 1224 | fi
|
---|
| 1225 |
|
---|
[1531] | 1226 | # 4th try, with dumpuuid (VMWare only ?) for swap
|
---|
| 1227 | if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
|
---|
[2965] | 1228 | list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
|
---|
[1531] | 1229 | for dev in $list_dev ; do
|
---|
[2965] | 1230 | dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
|
---|
[1531] | 1231 | if [ "x$dev_exists" != "x" ]; then
|
---|
| 1232 | actual_dev=$dev
|
---|
| 1233 | break;
|
---|
| 1234 | fi
|
---|
| 1235 | done
|
---|
| 1236 | fi
|
---|
| 1237 |
|
---|
[747] | 1238 | # Check if one of all those tries has known success
|
---|
| 1239 | if [ "x$actual_dev" != "x" ]; then
|
---|
| 1240 | current_partition=$actual_dev
|
---|
| 1241 | else
|
---|
[2069] | 1242 | Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
|
---|
[747] | 1243 | fi
|
---|
| 1244 | else
|
---|
[1863] | 1245 | # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
|
---|
| 1246 | # they use symlinks in fstab unrelated to what is shown in mount !
|
---|
| 1247 | if [ _"$partition_mountpt" = _"" ]; then
|
---|
[1986] | 1248 | # set default in case we dont't find it
|
---|
[2965] | 1249 | for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
|
---|
[3084] | 1250 | if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
|
---|
[1863] | 1251 | str_to_find_fmt_with=$tmpp
|
---|
[2965] | 1252 | partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
|
---|
[1864] | 1253 | break;
|
---|
[1863] | 1254 | fi
|
---|
| 1255 | done
|
---|
| 1256 | fi
|
---|
[747] | 1257 | fi
|
---|
| 1258 |
|
---|
[3702] | 1259 | # Avoid analyzing btrfs subvol partitions
|
---|
| 1260 | partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | grep -v 'subvol=' | head -n1`
|
---|
[3084] | 1261 | # Detects noauto partitions not mounted and exclude them
|
---|
| 1262 | if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" = "" ] ; then
|
---|
[3702] | 1263 | LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
|
---|
[3084] | 1264 | continue
|
---|
| 1265 | fi
|
---|
| 1266 | # Detects bind partitions and exclude them
|
---|
| 1267 | if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
|
---|
[3702] | 1268 | LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
|
---|
[3084] | 1269 | continue
|
---|
| 1270 | fi
|
---|
| 1271 |
|
---|
[2566] | 1272 | # Look for devices which have to be excluded
|
---|
| 1273 | skip=0
|
---|
| 1274 | if [ "$MINDI_EXCLUDE_DEVS" ] ; then
|
---|
[2568] | 1275 | l=""
|
---|
[3231] | 1276 | list_of_devices="`mr-read-all-link $current_partition`"
|
---|
[2568] | 1277 | for d in $list_of_devices; do
|
---|
[2579] | 1278 | l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
|
---|
[2568] | 1279 | done
|
---|
[2618] | 1280 |
|
---|
| 1281 | # Remove PVs from LVs excluded
|
---|
| 1282 | l="$l `GetPVsForLV $current_partition`"
|
---|
| 1283 |
|
---|
| 1284 | # We want a single unique list
|
---|
[3522] | 1285 | list_of_devices="`echo $l | tr ' ' '\n' | sort -u`"
|
---|
[2618] | 1286 |
|
---|
[2854] | 1287 | for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
|
---|
[2568] | 1288 | if [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
|
---|
[2963] | 1289 | LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
|
---|
[2566] | 1290 | skip=1
|
---|
| 1291 | continue
|
---|
| 1292 | fi
|
---|
| 1293 | done
|
---|
| 1294 | fi
|
---|
| 1295 | if [ $skip -eq 1 ]; then
|
---|
| 1296 | continue
|
---|
| 1297 | fi
|
---|
| 1298 |
|
---|
[3702] | 1299 | # sort in case of btrfs subvol
|
---|
| 1300 | partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB | sort -u`
|
---|
[3028] | 1301 | # Detects iso9660 ISO images and exclude them
|
---|
| 1302 | if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
|
---|
[3064] | 1303 | LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
|
---|
[3028] | 1304 | continue
|
---|
| 1305 | fi
|
---|
[747] | 1306 | # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
|
---|
| 1307 | # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
|
---|
| 1308 | # the former is then a link to the latter, so we test whether
|
---|
| 1309 | # $current_partition is actually such a link or not and set
|
---|
[755] | 1310 | # $current_lvolume accordingly. On Debian you may find more than one answer
|
---|
| 1311 | # so we remove the one corresponding to /dev/.static
|
---|
| 1312 | # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
|
---|
| 1313 | # principle is the same and we need to find the link to it as well.
|
---|
| 1314 | # Note that $current_lvolume may well be an
|
---|
[747] | 1315 | # ordinary device. It is just to make sure that we feed the right value
|
---|
| 1316 | # into any of the LVM tools if possible.
|
---|
| 1317 |
|
---|
[3064] | 1318 | current_lvolume="$current_partition"
|
---|
[763] | 1319 | if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
|
---|
[755] | 1320 | # .static dir are a Debian specificity
|
---|
[763] | 1321 | current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
|
---|
[755] | 1322 | echo $current_lvolume | grep -q ' '
|
---|
[784] | 1323 | if [ $? -eq 0 ]; then
|
---|
[2963] | 1324 | LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
|
---|
[755] | 1325 | fi
|
---|
[2072] | 1326 | # if it's not found, it may well be a real device such as a multipath one
|
---|
| 1327 | # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
|
---|
| 1328 | if [ _"$current_lvolume" = _"" ]; then
|
---|
| 1329 | current_lvolume="$current_partition"
|
---|
| 1330 | fi
|
---|
[747] | 1331 | fi
|
---|
| 1332 | #
|
---|
| 1333 | # End of LVM device style variation code (other than $current_lvolume).
|
---|
| 1334 |
|
---|
[745] | 1335 | if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
|
---|
| 1336 | # Size computed via LVM not directly
|
---|
[747] | 1337 | partition_size="lvm"
|
---|
| 1338 | else
|
---|
| 1339 | [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
|
---|
| 1340 | [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
|
---|
| 1341 | if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
|
---|
[2947] | 1342 | # Skip swap files
|
---|
| 1343 | [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
|
---|
[2919] | 1344 | partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
|
---|
[747] | 1345 | [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
|
---|
[3368] | 1346 | [ "$partition_format" != "swap" ] && partition_format="swap"
|
---|
[747] | 1347 | if [ "$partition_size" = "" ] ; then
|
---|
[3368] | 1348 | totalsize=0
|
---|
| 1349 | items=0
|
---|
| 1350 | for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
|
---|
[747] | 1351 | totalsize=$(($totalsize+$i))
|
---|
| 1352 | items=$(($items+1))
|
---|
[3368] | 1353 | done
|
---|
| 1354 | [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
|
---|
| 1355 | [ "$partition_size" -lt "125000" ] && partition_size=125000
|
---|
| 1356 | LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
|
---|
[747] | 1357 | fi
|
---|
[2947] | 1358 | else
|
---|
| 1359 | partition_size=`SizeOfPartition $current_partition`
|
---|
[747] | 1360 | fi
|
---|
| 1361 | fi
|
---|
| 1362 | [ "$partition_mountpt" = "swap" ] && partition_format="swap"
|
---|
| 1363 | [ "$partition_format" = "swap" ] && partition_mountpt="swap"
|
---|
| 1364 | if [ "$partition_mountpt" = "" ] ; then
|
---|
| 1365 | if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
|
---|
| 1366 | if [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
|
---|
| 1367 | partition_mountpt="raid"
|
---|
| 1368 | partition_format="raid"
|
---|
| 1369 | else
|
---|
| 1370 | partition_mountpt="lvm"
|
---|
| 1371 | partition_format="lvm"
|
---|
| 1372 | fi
|
---|
| 1373 | fi
|
---|
| 1374 | fi
|
---|
| 1375 | psz=$partition_size
|
---|
[2963] | 1376 | LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
|
---|
[747] | 1377 | [ "$psz" != "lvm" ] && psz=$(($psz/1024))
|
---|
| 1378 | if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
|
---|
| 1379 | partition_mountpt="image"
|
---|
| 1380 | old_partition_fmt=$partition_format
|
---|
| 1381 | partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
|
---|
| 1382 | partition_size=$(($partition_size+1)); # just in case
|
---|
| 1383 | if [ "$partition_format" = "Linux" ] ; then
|
---|
[2963] | 1384 | LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
|
---|
| 1385 | LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
|
---|
[747] | 1386 | partition_format=$old_partition_fmt
|
---|
| 1387 | fi
|
---|
| 1388 | fi
|
---|
[2566] | 1389 |
|
---|
[747] | 1390 | if [ ! "$partition_mountpt" ] ; then
|
---|
[2963] | 1391 | LogFile "------- $FDISK -l $qq log ------------"
|
---|
[1883] | 1392 | for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
|
---|
[747] | 1393 | partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
|
---|
| 1394 | [ "$partition_format" ] && break
|
---|
| 1395 | done
|
---|
[2963] | 1396 | LogFile "------- $FDISK log end ------------"
|
---|
[747] | 1397 | if [ "$partition_format" = "Compaq diagnostics" ] ; then
|
---|
| 1398 | partition_format="compaq"
|
---|
| 1399 | elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
|
---|
[3149] | 1400 | LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
|
---|
[747] | 1401 | continue
|
---|
| 1402 | fi
|
---|
| 1403 | fi
|
---|
[1755] | 1404 | if [ "$redhat_label" ]; then
|
---|
| 1405 | label="$redhat_label"
|
---|
[1756] | 1406 | elif [ "$uuid" ]; then
|
---|
[1755] | 1407 | label="$uuid"
|
---|
| 1408 | fi
|
---|
[3330] | 1409 |
|
---|
| 1410 | # On RHEL 7 they use UUID concretely, even when not mentioned in fstab
|
---|
| 1411 | # in order to mount the root part e.g. in grub.
|
---|
| 1412 | # One way to solve this is to add the UUID now, if there wasn't one so it's
|
---|
| 1413 | # restored correctly
|
---|
| 1414 | if [ _"$label" = _"" ]; then
|
---|
| 1415 | label=`blkid $current_partition | perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
|
---|
| 1416 | fi
|
---|
| 1417 |
|
---|
[747] | 1418 | partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
|
---|
[963] | 1419 | [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
|
---|
[3149] | 1420 | unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
|
---|
[747] | 1421 | if [ "$current_partition" = "" ] ; then
|
---|
[2963] | 1422 | LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
|
---|
[747] | 1423 | elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
|
---|
| 1424 | if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
|
---|
| 1425 | partition_mountpt=raid
|
---|
| 1426 | partition_format=raid
|
---|
[3149] | 1427 | printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
|
---|
[1755] | 1428 | printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
|
---|
[747] | 1429 | else
|
---|
[2963] | 1430 | LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
|
---|
[747] | 1431 | fi
|
---|
| 1432 | elif [ "$partition_format" = "" ] ; then
|
---|
[2963] | 1433 | LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
|
---|
[747] | 1434 | elif [ "$partition_size" = "" ] ; then
|
---|
[2963] | 1435 | LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
|
---|
[747] | 1436 | elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
|
---|
| 1437 | continue
|
---|
| 1438 | else
|
---|
| 1439 | if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
|
---|
[3522] | 1440 | LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
|
---|
[747] | 1441 | partition_format="vfat"
|
---|
| 1442 | fi
|
---|
[3149] | 1443 | printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
|
---|
[1755] | 1444 | printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
|
---|
[747] | 1445 | fi
|
---|
| 1446 | done
|
---|
[3149] | 1447 | LogAll "-----------------------------------"
|
---|
[747] | 1448 | }
|
---|
| 1449 |
|
---|
[2432] | 1450 | CheckMountlist() {
|
---|
| 1451 | local file=$1
|
---|
| 1452 | # Coherency verification
|
---|
[2529] | 1453 | ML01=`cat $file | wc -l`
|
---|
[2995] | 1454 | ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
|
---|
[2432] | 1455 | ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
|
---|
[3024] | 1456 | ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
|
---|
[2529] | 1457 | if [ "$ML01" -ne "$ML1" ]; then
|
---|
[2963] | 1458 | LogFile "--------------------------------------------"
|
---|
[3081] | 1459 | LogAll "WARNING: Duplicate device entry in mountlist"
|
---|
[2963] | 1460 | LogFile "--------------------------------------------"
|
---|
[2432] | 1461 | fi
|
---|
[2529] | 1462 | if [ "$ML02" -ne "$ML2" ]; then
|
---|
[2963] | 1463 | LogFile "--------------------------------------------"
|
---|
| 1464 | LogAll "WARNING: Duplicate mountpoint entry in mountlist"
|
---|
| 1465 | LogFile "------------------------------------------------"
|
---|
[2432] | 1466 | fi
|
---|
| 1467 | }
|
---|
[747] | 1468 |
|
---|
[3476] | 1469 |
|
---|
[3522] | 1470 | MakeISOErrors() {
|
---|
[3421] | 1471 |
|
---|
[3522] | 1472 | LogFile "----------- $ISO_CMD's errors --------------"
|
---|
[3596] | 1473 | LogAll "Command invoked: $CMD ."
|
---|
[3522] | 1474 | LogAll "$ISO_CMD returned the following errors:"
|
---|
| 1475 | cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
|
---|
| 1476 | LogAll "ERROR: Failed to create ISO image."
|
---|
| 1477 | }
|
---|
[3499] | 1478 |
|
---|
[3532] | 1479 | MakeISO() {
|
---|
| 1480 |
|
---|
[3596] | 1481 | LogAll "INFO: Generating ISO image."
|
---|
[3608] | 1482 | LOCISO=`echo $CMD | perl -p -e 's|.* -o (.+)/mindi.iso .*|$1|'`
|
---|
[3532] | 1483 | (cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
|
---|
| 1484 | if [ $? -ne 0 ] ; then
|
---|
[3596] | 1485 | # In case of UEFI handle differences in option handling
|
---|
[3532] | 1486 | if [ "$BOOT_TYPE" = "UEFI" ]; then
|
---|
| 1487 | CMD=`echo $CMD | perl -p -e 's|--efi-boot |-eltorito-platform 0xEF -eltorito-boot |; s|-efi-boot |-eltorito-platform 0xEF -eltorito-boot |;'`
|
---|
| 1488 | (cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
|
---|
[3596] | 1489 | if [ $? -ne 0 ] ; then
|
---|
| 1490 | # xorriso e.g.
|
---|
| 1491 | CMD=`echo $CMD | perl -p -e 's|-eltorito-platform 0xEF ||'`
|
---|
| 1492 | (cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
|
---|
| 1493 | if [ $? -eq 0 ] ; then
|
---|
| 1494 | LogAll "INFO: Invoking $CMD ."
|
---|
[3608] | 1495 | LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
|
---|
[3596] | 1496 | else
|
---|
| 1497 | MakeISOErrors
|
---|
[3599] | 1498 | fi
|
---|
[3596] | 1499 | else
|
---|
| 1500 | LogAll "INFO: Invoking $CMD ."
|
---|
[3608] | 1501 | LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
|
---|
[3532] | 1502 | fi
|
---|
| 1503 | else
|
---|
| 1504 | MakeISOErrors
|
---|
| 1505 | fi
|
---|
| 1506 | else
|
---|
[3596] | 1507 | LogAll "INFO: Invoking $CMD ."
|
---|
[3608] | 1508 | LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
|
---|
[3532] | 1509 | fi
|
---|
| 1510 | rm -f $MINDI_TMP/mkisofs.log
|
---|
| 1511 | }
|
---|
| 1512 |
|
---|
[3522] | 1513 | MakeBootableDevice() {
|
---|
[3499] | 1514 |
|
---|
[3522] | 1515 | local target tbc retval part size mount_opt
|
---|
| 1516 |
|
---|
| 1517 | target="$1"
|
---|
| 1518 |
|
---|
| 1519 | rm -Rf $MINDI_TMP/target
|
---|
| 1520 | mkdir -p $MINDI_TMP/target/{images,archives,tmp}
|
---|
| 1521 |
|
---|
| 1522 | LogAll "INFO: Copying $MINDI_CACHE/*.gz to $MINDI_TMP/target/images"
|
---|
| 1523 | cp -f $MINDI_CACHE/*.gz $MINDI_TMP/target/images 2>> $LOGFILE || LogAll "WARNING: MakeBootableDevice: Cannot copy files to $MINDI_TMP/target/images"
|
---|
| 1524 | for i in memdisk memtest.bin memtest.img ; do
|
---|
| 1525 | j=$MINDI_LIB/$i
|
---|
| 1526 | k=$MINDI_TMP/target
|
---|
| 1527 | if [ -e "$j" ] ; then
|
---|
| 1528 | LogAll "INFO: Copying $j to $k"
|
---|
| 1529 | cp -f $j $k 2>> $LOGFILE || LogAll "Failed to copy $j to $k"
|
---|
| 1530 | cp -f $j $MINDI_TMP 2>> $LOGFILE || LogAll "Failed to copy $j to $MINDI_TMP"
|
---|
| 1531 | if [ _"$MONDO_SHARE" != _"" ]; then
|
---|
| 1532 | cp -f $j $MONDO_ROOT 2>> $LOGFILE || LogAll "Failed to copy $j to $MONDO_ROOT"
|
---|
[3499] | 1533 | fi
|
---|
[3522] | 1534 | fi
|
---|
| 1535 | done
|
---|
[3499] | 1536 |
|
---|
[3522] | 1537 | retval=0
|
---|
| 1538 | LogAll "INFO: Copying $kernelpath to $MINDI_TMP/target/vmlinuz"
|
---|
| 1539 | cp $kernelpath $MINDI_TMP/target/vmlinuz 2>> $LOGFILE
|
---|
[3528] | 1540 | if [ $? -ne 0 ] ; then
|
---|
[3522] | 1541 | LogAll "ERROR: Failed to copy $kernelpath $MINDI_TMP/target/"
|
---|
| 1542 | retval=$(($retval+1))
|
---|
| 1543 | fi
|
---|
| 1544 | LogAll "INFO: Copying $MINDI_TMP/initrd.img to $MINDI_TMP/target/initrd.img"
|
---|
| 1545 | cp $MINDI_TMP/initrd.img $MINDI_TMP/target/ 2>> $LOGFILE
|
---|
[3528] | 1546 | if [ $? -ne 0 ] ; then
|
---|
[3522] | 1547 | LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MINDI_TMP/target/"
|
---|
| 1548 | retval=$(($retval+1))
|
---|
| 1549 | fi
|
---|
[3421] | 1550 |
|
---|
[3692] | 1551 | # copy boot stuff now generated in PrepareBigDir
|
---|
[3522] | 1552 | if [ "$BOOT_TYPE" = "UEFI" ]; then
|
---|
| 1553 | (cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
|
---|
| 1554 | tbc="EFI"
|
---|
[3528] | 1555 | # Also prepare a BIOS compatible boot
|
---|
| 1556 | if [ "$target" = "ISO" ]; then
|
---|
| 1557 | cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
|
---|
| 1558 | fi
|
---|
[3522] | 1559 | else
|
---|
| 1560 | (cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
|
---|
| 1561 | tbc="syslinux"
|
---|
| 1562 | if [ -f "$MINDI_TMP/target/$tbc/syslinux.cfg" ]; then
|
---|
| 1563 | LogFile "----------- syslinux's conf --------------"
|
---|
| 1564 | cat $MINDI_TMP/target/$tbc/syslinux.cfg >> $LOGFILE
|
---|
| 1565 | LogFile "------------------------------------------"
|
---|
| 1566 | fi
|
---|
| 1567 | if [ "$target" = "ISO" ]; then
|
---|
| 1568 | cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
|
---|
[3528] | 1569 | if [ $? -ne 0 ] ; then
|
---|
[3522] | 1570 | LogAll "ERROR: Failed to copy $ISOLINUX to $MINDI_TMP/target/$tbc"
|
---|
| 1571 | retval=$(($retval+1))
|
---|
[3476] | 1572 | fi
|
---|
[3522] | 1573 | fi
|
---|
| 1574 | fi
|
---|
[3476] | 1575 |
|
---|
[3522] | 1576 | if [ "$ARCH" != "ia64" ] ; then
|
---|
| 1577 | if [ $KERNEL_IS_XEN = "yes" ]; then
|
---|
| 1578 | FindMboot32Binary
|
---|
| 1579 | cp $xenkernelpath $MINDI_TMP/target/xen.gz 2>> $LOGFILE
|
---|
[3528] | 1580 | if [ $? -ne 0 ] ; then
|
---|
[3522] | 1581 | LogAll "ERROR: Failed to copy $xenkernelpath to $MINDI_TMP/target/"
|
---|
| 1582 | retval=$(($retval+1))
|
---|
[1885] | 1583 | fi
|
---|
[3522] | 1584 | cp $MBOOTC32 $MINDI_TMP/target/$tbc/mboot.c32 2>> $LOGFILE
|
---|
[3528] | 1585 | if [ $? -ne 0 ] ; then
|
---|
[3522] | 1586 | LogAll "ERROR: Failed to copy $MBOOTC32 to $MINDI_TMP/target/$tbc"
|
---|
| 1587 | retval=$(($retval+1))
|
---|
| 1588 | fi
|
---|
[747] | 1589 | fi
|
---|
[3522] | 1590 | fi
|
---|
[3499] | 1591 |
|
---|
[3522] | 1592 | MakeMessageFile $MINDI_TMP/target/$tbc | cut -c1-80 > $MINDI_TMP/target/$tbc/message.txt
|
---|
| 1593 |
|
---|
| 1594 | if [ _"$MONDO_SHARE" != _"" ]; then
|
---|
| 1595 | cp -rf $MINDI_TMP/target/$tbc $MONDO_ROOT 2>> $LOGFILE
|
---|
[3528] | 1596 | if [ $? -ne 0 ] ; then
|
---|
[3522] | 1597 | LogAll "ERROR: Failed to copy $MINDI_TMP/target/$tbc to $MONDO_ROOT"
|
---|
| 1598 | LogAll " Please check the target directory."
|
---|
| 1599 | retval=$(($retval+1))
|
---|
| 1600 | fi
|
---|
| 1601 | if [ $KERNEL_IS_XEN = "yes" ]; then
|
---|
| 1602 | cp -f $MINDI_TMP/target/xen.gz $MONDO_ROOT 2>> $LOGFILE
|
---|
[3528] | 1603 | if [ $? -ne 0 ] ; then
|
---|
[3522] | 1604 | LogAll "ERROR: Failed to copy $MINDI_TMP/target/xen.gz to $MONDO_ROOT"
|
---|
| 1605 | LogAll " Please check the target directory."
|
---|
| 1606 | retval=$(($retval+1))
|
---|
[3476] | 1607 | fi
|
---|
[747] | 1608 | fi
|
---|
[3522] | 1609 | cp -f $MONDO_SHARE/autorun $MINDI_TMP/target 2>> $LOGFILE
|
---|
[3527] | 1610 | cp -f $MINDI_TMP/target/vmlinuz $MONDO_ROOT 2>> $LOGFILE
|
---|
[3528] | 1611 | if [ $? -ne 0 ] ; then
|
---|
[3527] | 1612 | LogAll "ERROR: Failed to copy $MINDI_TMP/vmlinuz to $MONDO_ROOT"
|
---|
| 1613 | LogAll " Please check the target directory."
|
---|
| 1614 | retval=$(($retval+1))
|
---|
| 1615 | fi
|
---|
| 1616 | cp -f $MINDI_TMP/target/initrd.img $MONDO_ROOT 2>> $LOGFILE
|
---|
[3528] | 1617 | if [ $? -ne 0 ] ; then
|
---|
[3527] | 1618 | LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MONDO_ROOT"
|
---|
| 1619 | LogAll " Please check the target directory."
|
---|
| 1620 | retval=$(($retval+1))
|
---|
| 1621 | fi
|
---|
[3522] | 1622 | fi
|
---|
[747] | 1623 |
|
---|
[3522] | 1624 | if [ -f "$MINDI_TMP/$MRCFG" ]; then
|
---|
| 1625 | cp -f $MINDI_TMP/$MRCFG $MINDI_TMP/target/tmp
|
---|
| 1626 | fi
|
---|
[747] | 1627 |
|
---|
[3522] | 1628 | LogFile "----------- target dir content -----------"
|
---|
| 1629 | LogFile "------------------------------------------"
|
---|
| 1630 | ls -lR $MINDI_TMP/target >> $LOGFILE
|
---|
| 1631 | LogFile "------------------------------------------"
|
---|
| 1632 | LogFile "----------- target dir sizes -------------"
|
---|
| 1633 | du -sk $MINDI_TMP/target/* >> $LOGFILE
|
---|
| 1634 | LogFile "------------------------------------------"
|
---|
[3692] | 1635 | LogFile "Kernel size = `du -sk $kernelpath | cut -f1` K"
|
---|
| 1636 | LogFile "--------------------------------"
|
---|
[3476] | 1637 |
|
---|
[3522] | 1638 | if [ "$retval" -ne "0" ] ; then
|
---|
[3546] | 1639 | sync
|
---|
[3522] | 1640 | umount $MINDI_TMP/target
|
---|
| 1641 | LogAll "ERROR: Problems while creating boot media."
|
---|
| 1642 | LogAll " Please unload some of your modules and try again."
|
---|
[3692] | 1643 | Die " Try using another temporary directory instead of $MINDI_TMP"
|
---|
[3522] | 1644 | fi
|
---|
[3476] | 1645 |
|
---|
[3522] | 1646 | mkdir -p $MINDI_TMP/mpt
|
---|
[1684] | 1647 |
|
---|
[3522] | 1648 | if [ "$target" = "USB" ]; then
|
---|
| 1649 | LogAll "INFO: Transforming $USBDEVICE in a Bootable device"
|
---|
| 1650 | LogAll "INFO: Checking $USBDEVICE"
|
---|
[2924] | 1651 | $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
|
---|
[1684] | 1652 | if [ $? -ne 0 ]; then
|
---|
[2963] | 1653 | LogAll "ERROR: Unable to access $USBDEVICE"
|
---|
[3086] | 1654 | LogAll " Make sure your USB device is plugged in"
|
---|
[2963] | 1655 | MindiExit -1
|
---|
[1684] | 1656 | fi
|
---|
[3149] | 1657 | # Some distro do auto mount at that point (Ubuntu)
|
---|
[3522] | 1658 | LogAll "INFO: Unmounting $USBPART just in case"
|
---|
[3546] | 1659 | sync
|
---|
[1721] | 1660 | umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
|
---|
[3419] | 1661 | if [ "$BOOT_TYPE" = "BIOS" ]; then
|
---|
[3403] | 1662 | # If your key has no MBR it may cause an issue
|
---|
| 1663 | # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
|
---|
| 1664 | if [ -r $MBRFILE ]; then
|
---|
| 1665 | LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
|
---|
[3522] | 1666 | dd if=$MBRFILE of=$USBDEVICE >> $LOGFILE 2>> $LOGFILE
|
---|
[3403] | 1667 | else
|
---|
| 1668 | LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
|
---|
| 1669 | LogAll " on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
|
---|
| 1670 | fi
|
---|
[2855] | 1671 | fi
|
---|
[3522] | 1672 | LogAll "INFO: Preparing $USBDEVICE"
|
---|
[2851] | 1673 | cat > $MINDI_TMP/fdisk.txt << EOF
|
---|
[2057] | 1674 | d
|
---|
| 1675 | d
|
---|
| 1676 | d
|
---|
| 1677 | d
|
---|
[1684] | 1678 | n
|
---|
| 1679 | p
|
---|
| 1680 | 1
|
---|
| 1681 |
|
---|
| 1682 |
|
---|
| 1683 | t
|
---|
| 1684 | b
|
---|
| 1685 | a
|
---|
| 1686 | 1
|
---|
| 1687 | w
|
---|
| 1688 | EOF
|
---|
[2851] | 1689 | $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
|
---|
[1684] | 1690 | if [ $? -ne 0 ]; then
|
---|
[2963] | 1691 | LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
|
---|
[3086] | 1692 | LogAll " Make sure your USB device is plugged in"
|
---|
[1684] | 1693 | $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
|
---|
| 1694 | MindiExit -1
|
---|
| 1695 | fi
|
---|
[2963] | 1696 | LogFile "fdisk build file"
|
---|
| 1697 | LogFile "----------------"
|
---|
[2851] | 1698 | cat $MINDI_TMP/fdisk.txt >> $LOGFILE
|
---|
[2963] | 1699 | LogFile "----------------"
|
---|
[2924] | 1700 | rm -f $MINDI_TMP/fdisk.txt
|
---|
[3522] | 1701 | LogAll "INFO: The USB device $USBDEVICE now looks like this:"
|
---|
[2190] | 1702 | $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
|
---|
[3006] | 1703 | # Calling kpartx in case devices were not created
|
---|
[3033] | 1704 | if [ -x "/sbin/kpartx" ]; then
|
---|
[3027] | 1705 | /sbin/kpartx -a $USBDEVICE
|
---|
| 1706 | fi
|
---|
[2461] | 1707 | # Some distro do auto mount at that point (Ubuntu)
|
---|
[3522] | 1708 | LogAll "INFO: Unmounting $USBPART just in case again"
|
---|
[3546] | 1709 | sync
|
---|
[2461] | 1710 | umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
|
---|
[3086] | 1711 | # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
|
---|
| 1712 | if [ "`which dmsetup`" != "" ]; then
|
---|
[3368] | 1713 | block_id="`echo $USBPART | sed 's/\/dev\///g'`"
|
---|
| 1714 | if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
|
---|
[3522] | 1715 | LogAll "INFO: Removing $block_id from device mapper."
|
---|
[3368] | 1716 | sleep 1
|
---|
| 1717 | dmsetup remove $block_id
|
---|
| 1718 | fi
|
---|
| 1719 | fi
|
---|
[3522] | 1720 | part=$USBPART
|
---|
| 1721 | mount_opt=""
|
---|
| 1722 | else
|
---|
| 1723 | # ISO image
|
---|
| 1724 | part=$MINDI_TMP/mindi-bootroot.img
|
---|
| 1725 | size=`du -sk $MINDI_TMP/target 2> /dev/null | cut -f1`
|
---|
| 1726 | # Adds 10 MB to allow for additional space
|
---|
| 1727 | size=$(($size+10000))
|
---|
| 1728 | LogAll "INFO: Creating a $size KB empty file for boot device of the ISO image"
|
---|
| 1729 | dd if=/dev/zero of=$part bs=1k count=$size &> /dev/null || Die "Cannot dd blank $part"
|
---|
| 1730 | mount_opt="-o loop"
|
---|
| 1731 | fi
|
---|
| 1732 |
|
---|
| 1733 | LogAll "INFO: Creating a vfat filesystem on $part"
|
---|
[3531] | 1734 |
|
---|
| 1735 | mkfs.vfat $part 2>&1 >> $LOGFILE
|
---|
[3522] | 1736 | if [ $? -ne 0 ]; then
|
---|
| 1737 | LogAll "ERROR: Unable to create a vfat filesystem on $part"
|
---|
| 1738 | if [ "$target" = "USB" ]; then
|
---|
| 1739 | LogAll " Make sure your USB device is plugged in and partitioned ($part must exist on it)"
|
---|
[1684] | 1740 | $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
|
---|
| 1741 | fi
|
---|
[3522] | 1742 | MindiExit -1
|
---|
| 1743 | fi
|
---|
[3532] | 1744 | if [ "$target" = "ISO" ]; then
|
---|
| 1745 | if [ "$BOOT_TYPE" = "BIOS" ]; then
|
---|
| 1746 | # syslinux should be run on a local file (doen't work through NFS Cf: #297)
|
---|
| 1747 | # and run after the formating for versions > 6 it seems
|
---|
| 1748 | syslinux $part >> $LOGFILE 2>> $LOGFILE
|
---|
| 1749 | fi
|
---|
| 1750 | fi
|
---|
[3522] | 1751 | LogAll "INFO: Mounting $part on $MINDI_TMP/mpt"
|
---|
| 1752 | mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
|
---|
| 1753 | if [ $? -ne 0 ]; then
|
---|
| 1754 | LogAll "ERROR: Unable to mount $part on $MINDI_TMP/mpt"
|
---|
| 1755 | if [ "$target" = "USB" ]; then
|
---|
| 1756 | LogAll " Make sure your USB device is plugged in, partitioned and formated ($part must exist on it)"
|
---|
[1684] | 1757 | $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
|
---|
| 1758 | fi
|
---|
[3522] | 1759 | MindiExit -1
|
---|
| 1760 | fi
|
---|
| 1761 |
|
---|
| 1762 | LogAll "INFO: Moving boot info on $MINDI_TMP/mpt"
|
---|
| 1763 | mv $MINDI_TMP/target/* $MINDI_TMP/mpt
|
---|
[3528] | 1764 | if [ $? -ne 0 ] ; then
|
---|
[3522] | 1765 | LogFile "--------------------------------"
|
---|
| 1766 | LogFile "INFO: Size of $MINDI_TMP/mpt:"
|
---|
| 1767 | du -sk $MINDI_TMP/mpt/* >> $LOGFILE
|
---|
| 1768 | LogFile "--------------------------------"
|
---|
[3546] | 1769 | sync
|
---|
[3522] | 1770 | umount $MINDI_TMP/mpt
|
---|
| 1771 | LogAll "ERROR: Problems while creating boot media."
|
---|
| 1772 | LogAll " Please unload some of your modules and try again."
|
---|
[3692] | 1773 | Die " Try using another temporary directory instead of $MINDI_TMP"
|
---|
[3522] | 1774 | fi
|
---|
| 1775 |
|
---|
| 1776 | if [ "$target" = "ISO" ]; then
|
---|
[3534] | 1777 | if [ "$ARCH" != "ia64" ]; then
|
---|
| 1778 | ISO_OPT="$ISO_OPT -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
|
---|
| 1779 | fi
|
---|
[3522] | 1780 | # ISO
|
---|
[3533] | 1781 | if [ "$ARCH" != "ia64" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
|
---|
[3534] | 1782 | CMD="$ISO_CMD $ISO_OPT"
|
---|
[3532] | 1783 | MakeISO
|
---|
[3522] | 1784 | else
|
---|
[3534] | 1785 | if [ "$ARCH" = "ia64" ]; then
|
---|
| 1786 | CMD="$ISO_CMD $ISO_OPT -b images/mindi-bootroot.img -c images/boot.cat"
|
---|
| 1787 | else
|
---|
| 1788 | # UEFI
|
---|
| 1789 | echo "$CMD" | grep -q "xorriso"
|
---|
| 1790 | if [ $? -eq 0 ]; then
|
---|
[3598] | 1791 | XOV=`xorriso --version 2>&1 | head -1 | awk '{print $3}'`
|
---|
| 1792 | XOVMAJ=`echo $XOV | cut -d. -f1`
|
---|
| 1793 | XOVMIN=`echo $XOV | cut -d. -f2`
|
---|
| 1794 | if [ $XOVMAJ -ge 1 && $XOVMIN -ge 3 ]; then
|
---|
| 1795 | CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -e images/mindi-bootroot.img -no-emul-boot"
|
---|
| 1796 | else
|
---|
| 1797 | CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot --efi-boot images/mindi-bootroot.img"
|
---|
| 1798 | fi
|
---|
[3534] | 1799 | else
|
---|
| 1800 | CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
|
---|
| 1801 | fi
|
---|
| 1802 | fi
|
---|
[3522] | 1803 | fi
|
---|
| 1804 | fi
|
---|
| 1805 |
|
---|
[3546] | 1806 | # Avoids graphical tool to keep the FS mounted
|
---|
| 1807 | sync
|
---|
[3522] | 1808 | umount $MINDI_TMP/mpt || Die "Unable to unmount $MINDI_TMP/mpt"
|
---|
| 1809 |
|
---|
| 1810 | if [ "$target" = "ISO" ]; then
|
---|
[3532] | 1811 | cp $part $MINDI_CACHE
|
---|
[3533] | 1812 | if [ "$ARCH" = "ia64" ] || [ "$BOOT_TYPE" = "UEFI" ]; then
|
---|
[3692] | 1813 | # Mount again !
|
---|
| 1814 | LogAll "INFO: Re-Mounting $part on $MINDI_TMP/mpt"
|
---|
| 1815 | mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
|
---|
[3535] | 1816 | # We just need the EFI dir and the boot image for this case
|
---|
[3536] | 1817 | mkdir -p $MINDI_TMP/mpt2 $MINDI_TMP/mpt/images $MINDI_TMP/mpt/archives
|
---|
[3535] | 1818 | mount -o loop $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt2 2>> $LOGFILE
|
---|
| 1819 | # We need again the kernel+initrd at the root for UEFI boot at least
|
---|
| 1820 | cp -a $MINDI_TMP/mpt2/EFI $MINDI_TMP/mpt2/vmlinuz $MINDI_TMP/mpt2/initrd.img $MINDI_TMP/mpt
|
---|
| 1821 | # We need the boot image now and what mindi needs at restore time as well
|
---|
| 1822 | cp -a $MINDI_TMP/mpt2/images/all.tar.gz $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt/images
|
---|
[3546] | 1823 | # Avoids graphical tool to keep the FS mounted
|
---|
| 1824 | sync
|
---|
[3535] | 1825 | umount $MINDI_TMP/mpt2
|
---|
| 1826 | LogFile "----------- target dir content -----------"
|
---|
| 1827 | LogFile "------------------------------------------"
|
---|
| 1828 | ls -lR $MINDI_TMP/mpt >> $LOGFILE
|
---|
| 1829 | LogFile "------------------------------------------"
|
---|
[3532] | 1830 | MakeISO
|
---|
[3522] | 1831 | fi
|
---|
| 1832 | else
|
---|
| 1833 | # USB
|
---|
[1684] | 1834 | if [ "$ARCH" != "ia64" ] ; then
|
---|
[2939] | 1835 | syslinux -v 2>&1 | grep -q 4.02
|
---|
| 1836 | if [ $? -eq 0 ]; then
|
---|
| 1837 | # This buggy version of syslinux requires a call to --stupid and not -s
|
---|
| 1838 | syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
|
---|
| 1839 | res=$?
|
---|
| 1840 | else
|
---|
| 1841 | syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
|
---|
| 1842 | res=$?
|
---|
| 1843 | fi
|
---|
| 1844 | if [ $res -ne 0 ] ; then
|
---|
[2963] | 1845 | LogAll "----------- syslinux's errors --------------"
|
---|
[1684] | 1846 | cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
|
---|
[2963] | 1847 | LogAll "------------------------------------------"
|
---|
[3565] | 1848 | LogAll "ERROR: Failed to create USB image."
|
---|
[1684] | 1849 | else
|
---|
[2963] | 1850 | LogFile "INFO: Created bootable USB image on $USBDEVICE"
|
---|
[1684] | 1851 | fi
|
---|
| 1852 | rm -f $MINDI_TMP/syslinux.log
|
---|
| 1853 | else
|
---|
[2963] | 1854 | LogAll "ERROR: No USB boot support for ia64"
|
---|
[1684] | 1855 | MindiExit -1
|
---|
| 1856 | fi
|
---|
[3522] | 1857 | fi
|
---|
[1684] | 1858 | }
|
---|
| 1859 |
|
---|
| 1860 |
|
---|
[3522] | 1861 | OfferToMakeBootableUSB() {
|
---|
| 1862 |
|
---|
| 1863 | local i files
|
---|
| 1864 |
|
---|
| 1865 | if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
|
---|
| 1866 | echo -en "\nShall I make a bootable USB device ? (y/[n]) "
|
---|
| 1867 | read i
|
---|
| 1868 | [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
|
---|
| 1869 | if [ "$USBDEVICE" = "" ]; then
|
---|
| 1870 | echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
|
---|
| 1871 | read dev
|
---|
| 1872 | USBDEVICE=$dev
|
---|
| 1873 | fi
|
---|
| 1874 | echo "WARNING: This will erase all content on $USBDEVICE"
|
---|
| 1875 | echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
|
---|
| 1876 | read i
|
---|
| 1877 | [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
|
---|
| 1878 | else
|
---|
| 1879 | if [ "$PROMPT_MAKE_USB_IMAGE" = "no" ] && [ _"$MONDO_SHARE" = _"" ] && [ "$USBDEVICE" = "" ]; then
|
---|
| 1880 | Die "No USBDEVICE environment variable declared, aborting"
|
---|
| 1881 | fi
|
---|
| 1882 | fi
|
---|
| 1883 | USBPART="${USBDEVICE}1"
|
---|
| 1884 |
|
---|
| 1885 | MakeBootableDevice USB
|
---|
| 1886 | }
|
---|
| 1887 |
|
---|
| 1888 |
|
---|
| 1889 | OfferToMakeBootableISO() {
|
---|
| 1890 |
|
---|
| 1891 | local i files
|
---|
| 1892 |
|
---|
| 1893 | if [ -z "$ISO_CMD" ]; then
|
---|
| 1894 | LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
|
---|
| 1895 | return
|
---|
| 1896 | fi
|
---|
| 1897 |
|
---|
| 1898 | if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
|
---|
| 1899 | echo -en "\nShall I make a bootable CD image? (y/[n]) "
|
---|
| 1900 | read i
|
---|
| 1901 | [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
|
---|
| 1902 | fi
|
---|
| 1903 |
|
---|
| 1904 | MakeBootableDevice ISO
|
---|
| 1905 | }
|
---|
| 1906 |
|
---|
| 1907 |
|
---|
[747] | 1908 | MakeMessageFile() {
|
---|
[2292] | 1909 |
|
---|
| 1910 | if [ -x "/bin/lsb_release" ]; then
|
---|
| 1911 | DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
|
---|
[3173] | 1912 | elif [ -r /etc/arch-release ]; then # this code must be written before /etc/issue test to avoid errors
|
---|
| 1913 | DESC="Arch Linux"
|
---|
| 1914 | if [ -r /var/log/pacman.log ]; then
|
---|
| 1915 | # there are no releases but we can get the last system upgrade
|
---|
| 1916 | # Output example: Arch Linux [2011-03-03 01:39]
|
---|
| 1917 | DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
|
---|
[2754] | 1918 | fi
|
---|
[3426] | 1919 | elif [ -x "/etc/os-release" ]; then
|
---|
| 1920 | DESC=`grep PRETTY_NAME /etc/os-release | cut -d= -f2`
|
---|
| 1921 | elif [ -x "/usr/bin/pbdistrocheck" ]; then
|
---|
| 1922 | # For pb >= 0.9.8
|
---|
| 1923 | DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4 | sed 's/,/-/g'`
|
---|
[2732] | 1924 | elif [ -r /etc/issue.net ]; then
|
---|
[2731] | 1925 | DESC=`head -1 /etc/issue.net`
|
---|
[2732] | 1926 | elif [ -r /etc/issue ]; then
|
---|
[2731] | 1927 | DESC=`head -1 /etc/issue`
|
---|
[747] | 1928 | else
|
---|
[2731] | 1929 | DESC="Unknown desc"
|
---|
[747] | 1930 | fi
|
---|
[2292] | 1931 | sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
|
---|
[1885] | 1932 | if [ _"$MONDO_SHARE" != _"" ]; then
|
---|
| 1933 | if [ "$CDRECOVERY" != "yes" ] ; then
|
---|
[3270] | 1934 | if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
|
---|
[3281] | 1935 | echo -en "Press <0eenter07> for 0cnetwork restore07\n"
|
---|
[3278] | 1936 | echo -en "$BOOT_MEDIA_MESSAGE"
|
---|
[1885] | 1937 | elif [ ! "$MINDI_TMP" ] ; then
|
---|
[3522] | 1938 | echo -en "FYI, this is _not_ a MondoRescue CD.\n"
|
---|
| 1939 | if [ -e "$MINDI_LIB/memtest.img" ] ; then
|
---|
[3653] | 1940 | echo -en "Type 'memtest' <Enter> to test your machine's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
|
---|
[3522] | 1941 | fi
|
---|
[1885] | 1942 | else
|
---|
| 1943 | echo -en "$BOOT_MEDIA_MESSAGE"
|
---|
[747] | 1944 | fi
|
---|
[1983] | 1945 | else
|
---|
| 1946 | echo -en "\
|
---|
[747] | 1947 | To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
|
---|
| 1948 | CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
|
---|
[1983] | 1949 | fi
|
---|
[747] | 1950 | fi
|
---|
[3173] | 1951 |
|
---|
| 1952 | # Also create the other help screens
|
---|
| 1953 | head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
|
---|
| 1954 | head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
|
---|
| 1955 | head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
|
---|
[747] | 1956 | }
|
---|
| 1957 |
|
---|
| 1958 |
|
---|
[1983] | 1959 | MakeBootConfFile() {
|
---|
[1885] | 1960 | local options i ooo
|
---|
[747] | 1961 | options=""
|
---|
[1983] | 1962 | # Type of boot file (elilo or syslinux/isolinux)
|
---|
| 1963 | type=$1
|
---|
[3588] | 1964 | if [ "$type" = "elilo" ] || [ "$type" = "grub2" ]; then
|
---|
[1983] | 1965 | sep="="
|
---|
[3398] | 1966 | sepdef="="
|
---|
[1983] | 1967 | else
|
---|
| 1968 | sep=" "
|
---|
[3398] | 1969 | sepdef=" "
|
---|
[1983] | 1970 | fi
|
---|
[925] | 1971 |
|
---|
[1983] | 1972 | # Generic header for conf file
|
---|
[3398] | 1973 | if [ "$type" = "elilo" ]; then
|
---|
| 1974 | echo -en "prompt\n"
|
---|
| 1975 | elif [ "$type" = "grub" ]; then
|
---|
| 1976 | echo -en "pause Press a key when ready to restore\n"
|
---|
[3518] | 1977 | elif [ "$type" = "grub2" ]; then
|
---|
| 1978 | echo -en "set "
|
---|
[3398] | 1979 | else
|
---|
[3535] | 1980 | # syslinux family
|
---|
[3173] | 1981 | echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
|
---|
[925] | 1982 | fi
|
---|
[1983] | 1983 |
|
---|
| 1984 | # Compute which default option to boot from
|
---|
[3398] | 1985 | echo -en "default${sepdef}"
|
---|
[747] | 1986 | if [ "$CDRECOVERY" = "yes" ] ; then
|
---|
[3398] | 1987 | if [ "$type" = "grub" ]; then
|
---|
[3430] | 1988 | # TODO: Which num ???
|
---|
[3398] | 1989 | echo -en "0\n"
|
---|
| 1990 | else
|
---|
| 1991 | echo -en "RESTORE\n"
|
---|
| 1992 | fi
|
---|
[1983] | 1993 | # In case it's mondoarchive
|
---|
[1885] | 1994 | elif [ _"$MONDO_SHARE" != _"" ]; then
|
---|
[3270] | 1995 | if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
|
---|
[3398] | 1996 | if [ "$type" = "grub" ]; then
|
---|
| 1997 | echo -en "3\n"
|
---|
| 1998 | else
|
---|
| 1999 | echo -en "iso\n"
|
---|
| 2000 | fi
|
---|
[747] | 2001 | else
|
---|
[3398] | 2002 | if [ "$type" = "grub" ]; then
|
---|
| 2003 | echo -en "1\n"
|
---|
| 2004 | else
|
---|
| 2005 | echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
|
---|
| 2006 | fi
|
---|
[747] | 2007 | fi
|
---|
| 2008 | else
|
---|
[3398] | 2009 | if [ "$type" = "grub" ]; then
|
---|
| 2010 | echo -en "0\n"
|
---|
| 2011 | else
|
---|
| 2012 | echo -en "expert\n"
|
---|
| 2013 | fi
|
---|
[747] | 2014 | fi
|
---|
| 2015 |
|
---|
[1983] | 2016 | # Handle timeout
|
---|
[3588] | 2017 | if [ "$type" = "grub2" ]; then
|
---|
| 2018 | seppref="set "
|
---|
| 2019 | else
|
---|
| 2020 | seppref=""
|
---|
[3518] | 2021 | fi
|
---|
[3587] | 2022 | if [ "$CDRECOVERY" = "yes" ] ; then
|
---|
[3588] | 2023 | echo -en "${seppref}timeout${sep}10000\n"
|
---|
[3587] | 2024 | else
|
---|
[3588] | 2025 | echo -en "${seppref}timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
|
---|
[747] | 2026 | fi
|
---|
| 2027 | echo -en "\n"
|
---|
[1983] | 2028 |
|
---|
[2124] | 2029 | # prepare which labels will be generated
|
---|
[747] | 2030 | if [ "$CDRECOVERY" = "yes" ] ; then
|
---|
[925] | 2031 | options="RESTORE expert"
|
---|
[1885] | 2032 | else
|
---|
| 2033 | if [ _"$MONDO_SHARE" != _"" ]; then
|
---|
[2344] | 2034 | options="interactive expert compare iso nuke isonuke"
|
---|
[747] | 2035 | else
|
---|
| 2036 | options="expert"
|
---|
[925] | 2037 | fi
|
---|
[747] | 2038 | fi
|
---|
[1983] | 2039 |
|
---|
| 2040 | # Generate rest of conf file
|
---|
[747] | 2041 | for i in $options ; do
|
---|
[925] | 2042 | ooo=$i
|
---|
[3111] | 2043 | [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
|
---|
[1983] | 2044 | if [ "$type" = "elilo" ]; then
|
---|
[3692] | 2045 | outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=RAMDISK_SIZE $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
|
---|
[3398] | 2046 | elif [ "$type" = "grub" ]; then
|
---|
[3692] | 2047 | outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
|
---|
[3518] | 2048 | elif [ "$type" = "grub2" ]; then
|
---|
[3535] | 2049 | if [ "$BOOT_TYPE" = "UEFI" ]; then
|
---|
| 2050 | lorder="linuxefi"
|
---|
| 2051 | iorder="initrdefi"
|
---|
| 2052 | else
|
---|
| 2053 | lorder="linux"
|
---|
| 2054 | iorder="initrd"
|
---|
| 2055 | fi
|
---|
[3692] | 2056 | outstr="menuentry '$i' {\n\tinsmod all_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod part_gpt\n\tinsmod ext2\n\tinsmod xfs\n\techo 'Loading kernel...'\n\t$lorder /vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\techo 'Loading ramdisk...'\n\t$iorder /initrd.img\n}\n"
|
---|
[925] | 2057 | else
|
---|
[2073] | 2058 | ps="/"
|
---|
[2629] | 2059 | if [ $KERNEL_IS_XEN = "no" ]; then
|
---|
[3692] | 2060 | outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
|
---|
[2629] | 2061 | else
|
---|
[3692] | 2062 | outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
|
---|
[2629] | 2063 | fi
|
---|
[925] | 2064 | fi
|
---|
[1885] | 2065 | echo -en "$outstr"
|
---|
[747] | 2066 | done
|
---|
[1983] | 2067 | if [ -e "$MINDI_LIB/memtest.img" ] ; then
|
---|
| 2068 | if [ "$type" = "elilo" ]; then
|
---|
| 2069 | echo -en "image=/memtest.bin\n\tlabel=memtest\n"
|
---|
[2073] | 2070 | echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
|
---|
[3398] | 2071 | elif [ "$type" = "grub" ]; then
|
---|
[3415] | 2072 | echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
|
---|
[3518] | 2073 | elif [ "$type" = "grub2" ]; then
|
---|
| 2074 | echo -en "menuentry 'memtest' {\n\tload_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod xfs\n\tlinux /memtest\n\tinitrd /memtest.img\n}\n"
|
---|
[1983] | 2075 | else
|
---|
[2073] | 2076 | ps="/"
|
---|
| 2077 | if [ "$type" = "syslinux" ]; then
|
---|
| 2078 | ps=""
|
---|
| 2079 | fi
|
---|
| 2080 | echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
|
---|
| 2081 | echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
|
---|
[1983] | 2082 | fi
|
---|
| 2083 | fi
|
---|
[747] | 2084 | }
|
---|
| 2085 |
|
---|
[2006] | 2086 | ParseModprobeForIncludes() {
|
---|
| 2087 | local MODPROBE_CONF mpincfile includes include
|
---|
| 2088 |
|
---|
| 2089 | MODPROBE_CONF=/etc/modprobe.conf
|
---|
| 2090 | mpincfile=$1
|
---|
| 2091 | touch $mpincfile
|
---|
| 2092 | if [ -a $MODPROBE_CONF ]; then
|
---|
[2431] | 2093 | includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
|
---|
[2006] | 2094 | if [ -n "$includes" ]; then
|
---|
| 2095 | for include in $includes
|
---|
| 2096 | do
|
---|
| 2097 | if [ -a "$include" ]; then
|
---|
| 2098 | echo $include >> $mpincfile
|
---|
| 2099 | fi
|
---|
| 2100 | done
|
---|
| 2101 | fi
|
---|
| 2102 | fi
|
---|
| 2103 | }
|
---|
| 2104 |
|
---|
[3585] | 2105 | PrepareBootDir() {
|
---|
[2006] | 2106 |
|
---|
[3692] | 2107 | local detect
|
---|
| 2108 | # Needs a bigdir variable setup before calling it
|
---|
[3585] | 2109 |
|
---|
| 2110 | # copy (e)lilo/isolinux/grub/whatever stuff into it as well
|
---|
| 2111 | # to get it on the media (in addition to the boot part
|
---|
| 2112 | # and also to support UEFI boot mechanism
|
---|
| 2113 | if [ "$boottype" != "" ]; then
|
---|
| 2114 | detect="no"
|
---|
| 2115 | else
|
---|
| 2116 | detect="yes"
|
---|
| 2117 | boottype=syslinux
|
---|
| 2118 | fi
|
---|
| 2119 | bootdir=$bigdir/$boottype
|
---|
| 2120 | bootconf="$bootdir/$boottype.cfg"
|
---|
| 2121 | mkdir -p $bootdir
|
---|
| 2122 | FindLdlinux32Binary
|
---|
| 2123 |
|
---|
| 2124 | if [ "$BOOT_TYPE" != "BIOS" ]; then
|
---|
| 2125 | if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
|
---|
| 2126 | LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
|
---|
| 2127 | MindiExit -1
|
---|
| 2128 | fi
|
---|
| 2129 |
|
---|
| 2130 | mountefi=0
|
---|
| 2131 | # EFI or UEFI
|
---|
| 2132 | # TODO: names are hard-coded for now
|
---|
| 2133 | if [ "$BOOT_TYPE" = "UEFI" ]; then
|
---|
| 2134 | # UEFI
|
---|
| 2135 | efidir=$bigdir/EFI/BOOT
|
---|
| 2136 | # Auto-detection if needed
|
---|
| 2137 | if [ $detect = "yes" ]; then
|
---|
| 2138 |
|
---|
| 2139 | # mount /boot/efi if needed
|
---|
| 2140 | df -T | grep /boot/efi | grep -qE 'vfat'
|
---|
| 2141 | if [ $? -ne 0 ]; then
|
---|
| 2142 | mount /boot/efi
|
---|
| 2143 | if [ $? -ne 0 ]; then
|
---|
| 2144 | echo "ERROR: You have to mount your (U)EFI partition when using mindi"
|
---|
| 2145 | MindiExit -1
|
---|
| 2146 | fi
|
---|
| 2147 | mountefi=1
|
---|
| 2148 | fi
|
---|
| 2149 |
|
---|
| 2150 | # On RHEL6 grub works
|
---|
| 2151 | dname=`pbdistrocheck | grep -E '^Name:' | cut -d':' -f2`
|
---|
| 2152 | dver=`pbdistrocheck | grep -E '^Ver:' | cut -d':' -f2`
|
---|
[3602] | 2153 | if [ $dname = "rhel" -o $dname = "centos" -o $dname = "oel" ] && [ $dver = "6" ]; then
|
---|
[3585] | 2154 | boottype=grub
|
---|
[3652] | 2155 | elif [ $dname = "rhel" -o $dname = "centos" -o $dname = "oel" ] && [ $dver -ge 7 ]; then
|
---|
[3585] | 2156 | boottype=grub2
|
---|
[3652] | 2157 | elif [ $dname = "fedora" ] && [ $dver -ge 20 ]; then
|
---|
[3609] | 2158 | boottype=grub2
|
---|
[3652] | 2159 | elif [ $dname = "debian" ] && [ $dver -ge 8 ]; then
|
---|
[3585] | 2160 | boottype=grub2
|
---|
| 2161 | else
|
---|
| 2162 | # Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
|
---|
| 2163 | boottype=syslinux
|
---|
| 2164 | fi
|
---|
| 2165 | fi
|
---|
| 2166 | if [ "$boottype" = "syslinux" ]; then
|
---|
| 2167 | if [ ! "$bootbin" ]; then
|
---|
| 2168 | FindSyslinux64EFI
|
---|
| 2169 | bootbin=$SYSLINUX64EFI
|
---|
| 2170 | fi
|
---|
| 2171 | bootconf="$efidir/syslinux.cfg"
|
---|
| 2172 | elif [ "$boottype" = "grub" ]; then
|
---|
| 2173 | if [ ! "$bootbin" ]; then
|
---|
| 2174 | bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
|
---|
| 2175 | fi
|
---|
| 2176 | bootconf="$efidir/BOOTX64.conf"
|
---|
| 2177 | elif [ "$boottype" = "grub2" ]; then
|
---|
| 2178 | if [ ! "$bootbin" ]; then
|
---|
| 2179 | bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
|
---|
| 2180 | fi
|
---|
| 2181 | bootconf="$efidir/grub.cfg"
|
---|
| 2182 | fi
|
---|
| 2183 |
|
---|
| 2184 | # Depending on the arch, the target boot file is different
|
---|
| 2185 | if [ "$ARCH" = "x86_64" ] ; then
|
---|
| 2186 | tgbin="BOOTX64.efi"
|
---|
| 2187 | elif [ "$ARCH" = "armv8" ]; then
|
---|
| 2188 | tgbin="BOOTAA64.efi"
|
---|
| 2189 | else
|
---|
| 2190 | # i?386
|
---|
| 2191 | tgbin="BOOTIA32"
|
---|
| 2192 | fi
|
---|
| 2193 | else
|
---|
| 2194 | # EFI
|
---|
| 2195 | efidir=$bootdir
|
---|
| 2196 | bootbin=`find /boot/efi -iname "elilo.efi" | head -1`
|
---|
| 2197 | tgbin=$bootbin
|
---|
| 2198 | boottype=elilo
|
---|
| 2199 | bootconf="$efidir/elilo.conf"
|
---|
| 2200 | fi
|
---|
| 2201 | LogAll "INFO: Found $boottype boot type"
|
---|
| 2202 | mkdir -p $efidir
|
---|
| 2203 | cp $bootbin $efidir/$tgbin
|
---|
| 2204 |
|
---|
| 2205 | if [ $mountefi -eq 1 ]; then
|
---|
| 2206 | umount /boot/efi 2>&1 > /dev/null
|
---|
| 2207 | fi
|
---|
| 2208 |
|
---|
| 2209 | if [ $boottype = "syslinux" ]; then
|
---|
| 2210 | FindLdlinuxe64Binary
|
---|
| 2211 | if [ -e "$LDLINUXE64" ]; then
|
---|
| 2212 | LogFile "INFO: Copying $LDLINUXE64 to $efidir"
|
---|
| 2213 | cp $LDLINUXE64 $efidir 2>> $LOGFILE || Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
|
---|
| 2214 | cp $LDLINUXE64/../libutil.c32 $efidir 2>> $LOGFILE || Die "Cannot copy libutil.c32 to $efidir). Did you run out of disk space?"
|
---|
| 2215 | if [ -e $LDLINUXE64/../isolinux.c32 ]; then
|
---|
| 2216 | cp $LDLINUXE64/../isolinux.c32 $efidir 2>> $LOGFILE || Die "Cannot copy isolinux.c32 to $efidir). Did you run out of disk space?"
|
---|
| 2217 | fi
|
---|
| 2218 | fi
|
---|
| 2219 | fi
|
---|
| 2220 | # tgdir for syslinux
|
---|
| 2221 | tgdir=$bigdir/EFI
|
---|
| 2222 | else
|
---|
| 2223 | # tgdir for syslinux
|
---|
| 2224 | tgdir=$bootdir
|
---|
| 2225 | fi
|
---|
| 2226 | # In all cases prepare syslinux content for BIOS mode
|
---|
| 2227 | # so that we can have multi boot mode media BIOS+UEFI
|
---|
| 2228 | # Useful for syslinux 5.x
|
---|
| 2229 | if [ -e "$LDLINUXC32" ]; then
|
---|
| 2230 | LogFile "INFO: Copying $LDLINUXC32 to $tgdir"
|
---|
| 2231 | cp $LDLINUXC32 "$tgdir" 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $tgdir. Did you run out of disk space?"
|
---|
| 2232 | fi
|
---|
| 2233 | if [ -e $LDLINUXC32/../isolinux.c32 ]; then
|
---|
| 2234 | LogFile "INFO: Copying isolinux.c32 to $tgdir"
|
---|
| 2235 | cp $LDLINUXC32/../isolinux.c32 $tgdir 2>> $LOGFILE || Die "Cannot copy isolinux.c32 to $tgdir). Did you run out of disk space?"
|
---|
| 2236 | fi
|
---|
| 2237 |
|
---|
| 2238 | MakeBootConfFile $boottype > $bootconf
|
---|
| 2239 | LogFile "Boot Conf file $bootconf content is:"
|
---|
| 2240 | LogFile "------------------------------------"
|
---|
| 2241 | cat $bootconf >> $LOGFILE
|
---|
| 2242 | LogFile "------------------------------------"
|
---|
| 2243 | if [ "$BOOT_TYPE" = "UEFI" ]; then
|
---|
| 2244 | # Also generate the syslinux conf
|
---|
| 2245 | MakeBootConfFile syslinux > "$bigdir/EFI/syslinux.cfg"
|
---|
| 2246 | LogFile "Boot Conf file $bigdir/EFI/syslinux.cfg content is:"
|
---|
| 2247 | LogFile "---------------------------------------------------"
|
---|
| 2248 | cat $bigdir/EFI/syslinux.cfg >> $LOGFILE
|
---|
| 2249 | LogFile "---------------------------------------------------"
|
---|
| 2250 | fi
|
---|
| 2251 |
|
---|
| 2252 | }
|
---|
| 2253 |
|
---|
[3692] | 2254 | PrepareBigDirTar() {
|
---|
[3585] | 2255 | echo -en "INFO: Tarring and zipping the data content..."
|
---|
| 2256 | (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $MINDI_CACHE/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
|
---|
| 2257 | LogFile "Size of the data content"
|
---|
| 2258 | LogFile "------------------------"
|
---|
| 2259 | du -sk $MINDI_CACHE/*gz >> $LOGFILE
|
---|
| 2260 | LogFile "------------------------"
|
---|
| 2261 | echo -e "$DONE"
|
---|
| 2262 |
|
---|
| 2263 | }
|
---|
| 2264 |
|
---|
[3692] | 2265 | CleanBigDir() {
|
---|
| 2266 | [ "$bigdir" != "/" ] && echo $bigdir | grep -vq $MINDI_TMP && rm -rf $bigdir
|
---|
| 2267 | }
|
---|
[747] | 2268 |
|
---|
[3692] | 2269 | PrepareBigDir() {
|
---|
| 2270 | local needlist diskdir res i j k lines lfiles includefile
|
---|
| 2271 |
|
---|
[3407] | 2272 | rm -f $MINDI_CACHE/mindi.iso
|
---|
[940] | 2273 | needlist=$MINDI_TMP/what-we-need.txt
|
---|
[747] | 2274 | mkdir -p $bigdir/usr/bin
|
---|
[1983] | 2275 | mkdir -p $bigdir/usr/sbin
|
---|
[2006] | 2276 | includefile=$MINDI_TMP/$$.includefile.txt
|
---|
[747] | 2277 |
|
---|
[3149] | 2278 | lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
|
---|
[2409] | 2279 | if [ -e "$DEPLIST_FILE" ]; then
|
---|
[3149] | 2280 | lfiles="$DEPLIST_FILE $lfiles"
|
---|
[2409] | 2281 | fi
|
---|
[1885] | 2282 | lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
|
---|
[2006] | 2283 | ParseModprobeForIncludes $includefile
|
---|
[2019] | 2284 | lines=$(($lines+`cat $includefile | wc -l`))
|
---|
[2006] | 2285 | cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
|
---|
[747] | 2286 | res=$?
|
---|
[2006] | 2287 | rm -f $includefile
|
---|
[3231] | 2288 | ListKernelModulePaths >> $needlist
|
---|
[747] | 2289 | if [ "$res" -ne "0" ] ; then
|
---|
[1902] | 2290 | Die "You have $res files present in dependency list\nbut absent from filesystem."
|
---|
[747] | 2291 | fi
|
---|
| 2292 | mkdir -p $bigdir/tmp
|
---|
[1885] | 2293 | if [ _"$MONDO_SHARE" != _"" ]; then
|
---|
[3430] | 2294 | # TODO: no reason to have the cfg file stored twice
|
---|
[3278] | 2295 | MakeMondoConfigFile $MINDI_TMP/$MRCFG
|
---|
| 2296 | cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
|
---|
[747] | 2297 | fi
|
---|
[3281] | 2298 |
|
---|
| 2299 | # Needs to be done after the MRCFG creation
|
---|
| 2300 | FindAndAddUserKeyboardMappingFile
|
---|
| 2301 |
|
---|
[3166] | 2302 | [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
|
---|
[747] | 2303 | DropOptimizedLibraries $needlist $bigdir
|
---|
[3522] | 2304 | echo -en "INFO: Assembling dependency files"
|
---|
[747] | 2305 |
|
---|
[3522] | 2306 | CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist` 1
|
---|
[3585] | 2307 | rm -f $needlist
|
---|
[3522] | 2308 | echo -e "$DONE"
|
---|
[3149] | 2309 |
|
---|
[925] | 2310 | # also copy io.sys and msdos.sys, if we can find them
|
---|
[747] | 2311 | for i in `mount | cut -d' ' -f3` ; do
|
---|
[925] | 2312 | for j in io.sys msdos.sys ; do
|
---|
[963] | 2313 | [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
|
---|
[925] | 2314 | done
|
---|
[747] | 2315 | done
|
---|
| 2316 |
|
---|
[925] | 2317 | # master boot record, too
|
---|
[940] | 2318 | i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
|
---|
[3403] | 2319 | if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
|
---|
[3149] | 2320 | LogAll "INFO: Backing up $i's MBR"
|
---|
[925] | 2321 | dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
|
---|
| 2322 | sleep 1
|
---|
| 2323 | sync
|
---|
| 2324 | j=$i
|
---|
| 2325 | [ -h "$j" ] && j=`readlink -f $j`
|
---|
[3149] | 2326 | LogAll "INFO: Creating /dev/boot_device ($j)"
|
---|
[925] | 2327 | mkdir -p $bigdir/dev
|
---|
[2089] | 2328 | cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
|
---|
[747] | 2329 | fi
|
---|
| 2330 |
|
---|
[1983] | 2331 | # Get terminfo content
|
---|
| 2332 | ti="usr/share/terminfo/l"
|
---|
| 2333 | if [ -d /$ti ]; then
|
---|
[3522] | 2334 | mkdir -p $bigdir/$ti
|
---|
| 2335 | cp -Rdf /$ti/* $bigdir/$ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
|
---|
[747] | 2336 | fi
|
---|
[1764] | 2337 | if [ -e "$MONDO_SHARE/restore-scripts" ]; then
|
---|
[3543] | 2338 | cp -Rdf $MONDO_SHARE/restore-scripts/mondo/* $bigdir/usr/bin 2>> $LOGFILE
|
---|
[3528] | 2339 | [ $? -ne 0 ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
|
---|
[3543] | 2340 | cp -Rdf $MONDO_SHARE/restore-scripts/etc/* $bigdir/etc 2>> $LOGFILE
|
---|
[747] | 2341 | fi
|
---|
[2290] | 2342 | if [ -d "/lib/dev-state" ]; then
|
---|
[3542] | 2343 | cp -a /lib/dev-state $bigdir/lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
|
---|
[2290] | 2344 | fi
|
---|
[940] | 2345 | MakeMountlist $MINDI_TMP/mountlist.txt
|
---|
[2432] | 2346 | CheckMountlist $MINDI_TMP/mountlist.txt
|
---|
[1902] | 2347 | mkdir -p $bigdir/tmp
|
---|
[2092] | 2348 | cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
|
---|
[1885] | 2349 | if [ _"$MONDO_SHARE" != _"" ]; then
|
---|
[1902] | 2350 | cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
|
---|
[1885] | 2351 | fi
|
---|
[2032] | 2352 | if [ $LVM != "false" ]; then
|
---|
| 2353 | $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
|
---|
[3528] | 2354 | if [ $? -ne 0 ]; then
|
---|
[2032] | 2355 | LVM="false"
|
---|
| 2356 | rm -f $bigdir/tmp/i-want-my-lvm
|
---|
[2552] | 2357 | else
|
---|
[2963] | 2358 | LogFile "Your i-want-my-lvm file content is:"
|
---|
| 2359 | LogFile "-----------------------------------"
|
---|
[2552] | 2360 | cat $bigdir/tmp/i-want-my-lvm >> $LOGFILE
|
---|
[2963] | 2361 | LogFile "-----------------------------------"
|
---|
[2032] | 2362 | fi
|
---|
| 2363 | fi
|
---|
[3522] | 2364 | LogFile "INFO: Your mountlist.txt file content is:"
|
---|
[2963] | 2365 | LogFile "-----------------------------------"
|
---|
[1902] | 2366 | cat $bigdir/tmp/mountlist.txt >> $LOGFILE
|
---|
[2963] | 2367 | LogFile "-----------------------------------"
|
---|
[2432] | 2368 |
|
---|
[2092] | 2369 | echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
|
---|
| 2370 | echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
|
---|
[1902] | 2371 | if [ _"$MONDO_SHARE" != _"" ]; then
|
---|
| 2372 | for q in filelist.full.gz biggielist.txt ; do
|
---|
| 2373 | [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
|
---|
| 2374 | cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
|
---|
| 2375 | done
|
---|
| 2376 | fi
|
---|
| 2377 |
|
---|
[3585] | 2378 | PrepareBootDir
|
---|
[3692] | 2379 |
|
---|
[747] | 2380 | }
|
---|
| 2381 |
|
---|
| 2382 |
|
---|
| 2383 | Prompt() {
|
---|
| 2384 | echo -en "$1"
|
---|
| 2385 | read line
|
---|
| 2386 | }
|
---|
| 2387 |
|
---|
| 2388 |
|
---|
| 2389 | ReadLine() {
|
---|
| 2390 | local i incoming
|
---|
| 2391 | read incoming
|
---|
| 2392 | i=0
|
---|
| 2393 | while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
|
---|
[925] | 2394 | i=$(($i+1))
|
---|
| 2395 | read incoming
|
---|
[747] | 2396 | done
|
---|
| 2397 | echo "$incoming"
|
---|
| 2398 | }
|
---|
| 2399 |
|
---|
| 2400 |
|
---|
| 2401 | SizeOfPartition() {
|
---|
| 2402 | local devpath drive res stub
|
---|
| 2403 | device=$1
|
---|
[2917] | 2404 | if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
|
---|
| 2405 | Die "Cannot find $device's size - is your /etc/fstab sane?"
|
---|
| 2406 | fi
|
---|
[747] | 2407 | if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
|
---|
[925] | 2408 | res=`SizeOfRaidPartition $device`
|
---|
| 2409 | [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
|
---|
| 2410 | echo "$res"
|
---|
| 2411 | return 0
|
---|
[747] | 2412 | fi
|
---|
[925] | 2413 | # patch from Bill <bill@iwizard.biz> - 2003/08/25
|
---|
[960] | 2414 | res=`$FDISK -s $device 2>> $LOGFILE`
|
---|
[925] | 2415 | # end patch
|
---|
[2448] | 2416 | # take only the first in case of multiple mount (cifs, nfs, ...)
|
---|
| 2417 | [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
|
---|
[747] | 2418 | [ "$res" = "" ] && res="-1"
|
---|
| 2419 | echo $res
|
---|
| 2420 | return 0
|
---|
| 2421 | }
|
---|
| 2422 |
|
---|
| 2423 |
|
---|
| 2424 | SizeOfRaidPartition() {
|
---|
| 2425 | local real_dev smallest_size silly tmp
|
---|
| 2426 |
|
---|
| 2427 | silly=999999999
|
---|
| 2428 | smallest_size=$silly
|
---|
| 2429 |
|
---|
| 2430 | for real_dev in `GetRaidDevMembers $1` ; do
|
---|
[925] | 2431 | tmp=`SizeOfPartition $real_dev`
|
---|
| 2432 | [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
|
---|
[747] | 2433 | done
|
---|
| 2434 |
|
---|
| 2435 | if [ "$smallest_size" = "$silly" ] ; then
|
---|
[925] | 2436 | echo "-1"
|
---|
| 2437 | return 1
|
---|
[747] | 2438 | else
|
---|
[925] | 2439 | echo "$smallest_size"
|
---|
| 2440 | return 0
|
---|
[747] | 2441 | fi
|
---|
| 2442 | }
|
---|
| 2443 |
|
---|
| 2444 |
|
---|
| 2445 | StripExecutable()
|
---|
| 2446 | {
|
---|
| 2447 | local tmpfile
|
---|
[925] | 2448 |
|
---|
[940] | 2449 | tmpfile=$MINDI_TMP/stripped.$$.dat
|
---|
[747] | 2450 | [ -d "$1" ] || [ -h "$1" ] && return
|
---|
[963] | 2451 | cp -f $1 $tmpfile 2>> $LOGFILE
|
---|
[747] | 2452 | strip $tmpfile 2> /dev/null
|
---|
[3528] | 2453 | if [ $? -eq 0 ] ; then
|
---|
[963] | 2454 | cp -f $tmpfile $1 2>> $LOGFILE
|
---|
[2963] | 2455 | LogFile "INFO: Stripped binary $2"
|
---|
[747] | 2456 | fi
|
---|
| 2457 | rm -f $tmpfile
|
---|
| 2458 | }
|
---|
| 2459 |
|
---|
[2292] | 2460 | KernelVer() {
|
---|
| 2461 | local fkern_ver fname
|
---|
[747] | 2462 |
|
---|
[2292] | 2463 | fname=$1
|
---|
| 2464 | file $fname | grep -q gzip
|
---|
[3528] | 2465 | if [ $? -eq 0 ] ; then
|
---|
[2292] | 2466 | # Used by ia64
|
---|
[3528] | 2467 | fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
|
---|
[2292] | 2468 | else
|
---|
[3528] | 2469 | fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
|
---|
[2292] | 2470 | fi
|
---|
| 2471 | echo "$fkern_ver"
|
---|
| 2472 | }
|
---|
| 2473 |
|
---|
| 2474 |
|
---|
[2880] | 2475 | # WARNING: This function should just echo the final result !!!
|
---|
| 2476 | #
|
---|
[747] | 2477 | TryToFindKernelPath() {
|
---|
[2880] | 2478 | local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
|
---|
[925] | 2479 |
|
---|
[2292] | 2480 | we_want_version=$KERVERRUN
|
---|
[747] | 2481 | possible_kernels=""
|
---|
| 2482 | duff_kernels=""
|
---|
[2880] | 2483 | output=""
|
---|
[3368] | 2484 |
|
---|
[747] | 2485 | if [ "$ARCH" = "ia64" ] ; then
|
---|
| 2486 | root="/boot/efi/efi"
|
---|
| 2487 | else
|
---|
| 2488 | root="/"
|
---|
| 2489 | fi
|
---|
[2681] | 2490 | # See if we're booted from a Xen kernel
|
---|
[2889] | 2491 | # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
|
---|
| 2492 | if [ -f /proc/xen/capabilities ]; then
|
---|
[2681] | 2493 | # It's a Xen kernel
|
---|
| 2494 | KERNEL_IS_XEN="yes"
|
---|
[2963] | 2495 | LogFile "INFO: It's a Xen kernel..."
|
---|
[2681] | 2496 | fi
|
---|
| 2497 |
|
---|
[3122] | 2498 | for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
|
---|
[925] | 2499 | [ ! -e "$fname" ] && continue
|
---|
[747] | 2500 | [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
|
---|
[2292] | 2501 | fkern_ver=`KernelVer $fname`
|
---|
[747] | 2502 | [ "$fkern_ver" = "" ] && continue
|
---|
| 2503 | [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
|
---|
[925] | 2504 | [ -f "$fname" ] || continue
|
---|
| 2505 | [ -h "$fname" ] && continue
|
---|
| 2506 | kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
|
---|
| 2507 | file $fname | grep -q gzip
|
---|
[3528] | 2508 | if [ $? -eq 0 ] ; then
|
---|
[925] | 2509 | # Used by ia64
|
---|
| 2510 | if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
|
---|
[2880] | 2511 | LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
|
---|
[925] | 2512 | duff_kernels="$fname $duff_kernels"
|
---|
| 2513 | else
|
---|
[747] | 2514 | [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
|
---|
| 2515 | possible_kernels="$fname $possible_kernels"
|
---|
[925] | 2516 | fi
|
---|
[747] | 2517 | else
|
---|
[925] | 2518 | if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
|
---|
[2880] | 2519 | LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
|
---|
[925] | 2520 | duff_kernels="$fname $duff_kernels"
|
---|
| 2521 | else
|
---|
[747] | 2522 | [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
|
---|
| 2523 | possible_kernels="$fname $possible_kernels"
|
---|
[925] | 2524 | fi
|
---|
[747] | 2525 | fi
|
---|
| 2526 | done
|
---|
| 2527 | if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
|
---|
[3535] | 2528 | possible_kernels=`find /boot/vmlinuz-[2-9].* | tail -n1`
|
---|
[747] | 2529 | fi
|
---|
| 2530 | if [ ! "$possible_kernels" ] ; then
|
---|
[3149] | 2531 | LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
|
---|
[747] | 2532 | possible_kernels="$duff_kernels"
|
---|
| 2533 | if [ ! "$possible_kernels" ] ; then
|
---|
[3149] | 2534 | LogAll "INFO: Sorry, no duff kernels either"
|
---|
[747] | 2535 | else
|
---|
[3149] | 2536 | LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
|
---|
| 2537 | LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
|
---|
[747] | 2538 | fi
|
---|
| 2539 | fi
|
---|
[2681] | 2540 | if [ $KERNEL_IS_XEN = "yes" ]; then
|
---|
| 2541 | possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
|
---|
| 2542 | noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
|
---|
| 2543 | fi
|
---|
[2829] | 2544 | possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
|
---|
| 2545 | noof_kernels=`CountItemsIn "$possible_kernels"`
|
---|
[747] | 2546 | if [ "$noof_kernels" -eq "0" ] ; then
|
---|
[3149] | 2547 | LogAll "Could not find your kernel."
|
---|
[925] | 2548 | if [ -e "/boot/vmlinuz" ] ; then
|
---|
[3149] | 2549 | LogAll "INFO: Using /boot/vmlinuz as a last resort."
|
---|
[925] | 2550 | output=/boot/vmlinuz
|
---|
[747] | 2551 | else
|
---|
[925] | 2552 | output=""
|
---|
| 2553 | fi
|
---|
[747] | 2554 | elif [ "$noof_kernels" -eq "1" ] ; then
|
---|
[2880] | 2555 | kp=`echo "$possible_kernels" | sed s/' '//`
|
---|
[2963] | 2556 | LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
|
---|
[2880] | 2557 | output="$kp"
|
---|
[747] | 2558 | else
|
---|
| 2559 | for i in $possible_kernels ; do
|
---|
[2880] | 2560 | if [ "`echo $i | grep "$KERVERRUN"`" ]; then
|
---|
[3149] | 2561 | LogAll "INFO: OK, I used my initiative and found that "
|
---|
| 2562 | LogAll "INFO: $i is probably your kernel. "
|
---|
[925] | 2563 | output="$i"
|
---|
[2858] | 2564 | break
|
---|
[925] | 2565 | fi
|
---|
[747] | 2566 | done
|
---|
[2858] | 2567 | if [ ! -n "$output" ]; then
|
---|
[2880] | 2568 | if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
|
---|
[2681] | 2569 | output=/boot/vmlinuz
|
---|
[2963] | 2570 | LogFile "INFO: Schlomo, this one's for you."
|
---|
[2681] | 2571 | else
|
---|
[3651] | 2572 | LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
|
---|
[2963] | 2573 | LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
|
---|
[3651] | 2574 | LogFile "INFO: $possible_kernels"
|
---|
| 2575 | output=""
|
---|
[2681] | 2576 | fi
|
---|
| 2577 | fi
|
---|
| 2578 | fi
|
---|
| 2579 | if [ $KERNEL_IS_XEN = "yes" ]; then
|
---|
| 2580 | if [ "$noof_xenkernels" -eq "0" ]; then
|
---|
| 2581 | xenkernelpath=""
|
---|
| 2582 | elif [ "$noof_xenkernels" -eq "1" ]; then
|
---|
| 2583 | xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
|
---|
[2963] | 2584 | LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
|
---|
[925] | 2585 | else
|
---|
[2681] | 2586 | for i in $possible_xenkernels ; do
|
---|
[2880] | 2587 | if [ "`echo $i | grep "$KERVERRUN"`" ]; then
|
---|
[2963] | 2588 | LogFile "INFO: OK, I used my initiative and found that "
|
---|
| 2589 | LogFile "INFO: $i is probably your Xen kernel. "
|
---|
[2681] | 2590 | xenkernelpath="$i"
|
---|
[2858] | 2591 | break
|
---|
[2681] | 2592 | fi
|
---|
| 2593 | done
|
---|
[2858] | 2594 | if [ ! -n "$xenkernelpath" ]; then
|
---|
[2681] | 2595 | new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
|
---|
| 2596 | if [ ! -n "$new_possible_xenkernels" ]; then
|
---|
| 2597 | xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
|
---|
[2963] | 2598 | LogFile "INFO: Using $xenkernelpath"
|
---|
[2681] | 2599 | else
|
---|
[2963] | 2600 | LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
|
---|
| 2601 | LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
|
---|
| 2602 | LogFile "INFO: $possible_xenkernels"
|
---|
[2880] | 2603 | output=""
|
---|
[2681] | 2604 | xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
|
---|
[2963] | 2605 | LogFile "INFO: Using $xenkernelpath"
|
---|
[2681] | 2606 | fi
|
---|
| 2607 | fi
|
---|
[925] | 2608 | fi
|
---|
[2681] | 2609 | if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
|
---|
| 2610 | Die "Cannot find Xen kernel $xenkernelpath, aborting"
|
---|
| 2611 | fi
|
---|
[747] | 2612 | fi
|
---|
[3357] | 2613 | #LogAll "TryToFindKernelPath found $output"
|
---|
[2681] | 2614 | echo "$output"
|
---|
[747] | 2615 | }
|
---|
| 2616 |
|
---|
[3660] | 2617 | CopyFromConf() {
|
---|
[747] | 2618 |
|
---|
[3660] | 2619 | conf=$1
|
---|
[3692] | 2620 | mp=$2
|
---|
[3660] | 2621 | echo -en "INFO: Gathering dependencies of $conf.conf..."
|
---|
[3692] | 2622 | LogFile "INFO: Gathering dependencies of $conf.conf..."
|
---|
[3660] | 2623 | lis2=`grep -Ev '^#' $DEPLIST_DIR/$conf.conf | sort -u`
|
---|
| 2624 | noof_lines=`echo $lis2 | wc -w`
|
---|
| 2625 | progress=0
|
---|
| 2626 | # Get only the files which exist in that list
|
---|
| 2627 | # and potentially their symlink structure
|
---|
[3661] | 2628 | # put apart directories for later handling
|
---|
[3660] | 2629 | for f in $lis2; do
|
---|
| 2630 | if [ -d $f ]; then
|
---|
[3661] | 2631 | for g in `find $f`; do
|
---|
[3660] | 2632 | echo $g >> $MINDI_TMP/$conf.lis
|
---|
| 2633 | LocateDeps $g >> $MINDI_TMP/$conf.lis2
|
---|
| 2634 | done
|
---|
| 2635 | lis3="$lis3 $f"
|
---|
[3661] | 2636 | else
|
---|
[3660] | 2637 | if [ -r $f ]; then
|
---|
| 2638 | echo $f >> $MINDI_TMP/$conf.lis
|
---|
| 2639 | LocateDeps $f >> $MINDI_TMP/$conf.lis2
|
---|
| 2640 | fi
|
---|
| 2641 | fi
|
---|
| 2642 | progress=$(($progress+1))
|
---|
| 2643 | LogProgress $progress $noof_lines
|
---|
| 2644 | done
|
---|
| 2645 | echo -e "$DONE"
|
---|
[3692] | 2646 | LogAll "INFO: Processing all dependencies links for $conf.conf..."
|
---|
[3662] | 2647 | # And their deps except dirs
|
---|
| 2648 | lines=`sort -u $MINDI_TMP/$conf.lis $MINDI_TMP/$conf.lis2`
|
---|
| 2649 | rm -f $MINDI_TMP/$conf.lis2
|
---|
[3660] | 2650 | finallist=""
|
---|
[3662] | 2651 | # Remove directories from the list, as cp will create them anyway
|
---|
[3660] | 2652 | # and it may hurt if /lib is in it as on Debian/Ubuntu
|
---|
| 2653 | # recent bash says that -d is true for a link to a dir !
|
---|
[3662] | 2654 | for f in $lines; do
|
---|
[3660] | 2655 | if [ -e "$f" -a ! -d "$f" ] || [ -h "$f" ]; then
|
---|
| 2656 | # Do not overwrite files already in destination (avoid using option -n of cp not portable)
|
---|
[3692] | 2657 | if [ ! -e "$mp/$f" ]; then
|
---|
[3660] | 2658 | finallist="$finallist $f"
|
---|
| 2659 | fi
|
---|
| 2660 | fi
|
---|
| 2661 | done
|
---|
| 2662 | # But adds the directory useful in $lis3
|
---|
[3692] | 2663 | fnllist=`echo $finallist $lis3 | tr ' ' '\n' | sort -u | tr '\n' ' '`
|
---|
| 2664 | LogFile "INFO: Copying $conf related files with cp -a --parents $fnllist -t $mp/"
|
---|
| 2665 | cp -a --parents $fnllist -t $mp/ 2> $templog || LogAll "WARNING: Problem in $conf analysis" $templog
|
---|
[3662] | 2666 | rm -f $MINDI_TMP/$conf.lis
|
---|
[3660] | 2667 | }
|
---|
| 2668 |
|
---|
[3692] | 2669 | PrepareTargetDir() {
|
---|
| 2670 | local tgz_dir_fname nodes kernelsize res currsize not_copied j k s w needed_modules_path d thelink templog
|
---|
[925] | 2671 |
|
---|
[3692] | 2672 | tgz_dir_fname=$MINDI_LIB/rootfs
|
---|
| 2673 | rdz_fname=$MINDI_TMP/initrd.img
|
---|
| 2674 | kernelsize=`du -sk $kernelpath | cut -f1`
|
---|
[3403] | 2675 | res=0
|
---|
| 2676 | templog=$MINDI_TMP/$$.log
|
---|
| 2677 | > $templog
|
---|
| 2678 |
|
---|
[3692] | 2679 | mkdir -p $targetdir
|
---|
[3248] | 2680 | # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
|
---|
| 2681 | for d in bin sbin lib lib64; do
|
---|
| 2682 | if [ -h "/$d" ]; then
|
---|
| 2683 | thelink=`readlink /$d`
|
---|
[3692] | 2684 | mkdir -p $targetdir/$thelink || LogAll "ERROR: Unable to create $thelink in $targetdir"
|
---|
| 2685 | mv $targetdir/$d/* $targetdir/$d/.??* $targetdir/$thelink 2> /dev/null
|
---|
| 2686 | if [ -d "$targetdir/$d" -a ! -h "$targetdir/$d" ]; then
|
---|
| 2687 | rmdir $targetdir/$d
|
---|
[3248] | 2688 | fi
|
---|
[3692] | 2689 | if [ ! -h $targetdir/$d ]; then
|
---|
| 2690 | rm -f $targetdir/$d 2> /dev/null
|
---|
| 2691 | (cd $targetdir ; ln -s $thelink $d) || LogAll "ERROR: /$d is a symbolic link, but I couldn't create it in $targetdir"
|
---|
[3248] | 2692 | fi
|
---|
| 2693 | fi
|
---|
| 2694 | done
|
---|
[3357] | 2695 |
|
---|
[3692] | 2696 | LogFile "INFO: what is now in $targetdir"
|
---|
| 2697 | ls -al $targetdir >> $LOGFILE
|
---|
[3172] | 2698 |
|
---|
[2963] | 2699 | # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
|
---|
[3692] | 2700 | # copy from rootfs into targetdir
|
---|
| 2701 | LogAll "INFO: Copying Mindi files onto $targetdir"
|
---|
[3661] | 2702 | for f in $tgz_dir_fname/*; do
|
---|
[2963] | 2703 | if [ ! -r $f ]; then
|
---|
| 2704 | Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
|
---|
| 2705 | else
|
---|
[3692] | 2706 | cp -af $f $targetdir 2>&1 >> $LOGFILE
|
---|
[2963] | 2707 | fi
|
---|
| 2708 | done
|
---|
[3692] | 2709 | (cd $targetdir/etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
|
---|
| 2710 | # kernel expects linuxrc in ext2 filesystem
|
---|
| 2711 | (cd $targetdir ; ln -sf usr/sbin/init linuxrc)
|
---|
| 2712 | # kernel expects init in cpio filesystem
|
---|
| 2713 | (cd $targetdir ; ln -sf usr/sbin/init init)
|
---|
[1914] | 2714 |
|
---|
[3692] | 2715 | (cd $targetdir/dev ; tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz" ; rm -f dev-entries.tgz)
|
---|
[747] | 2716 |
|
---|
| 2717 | for w in insmod.static insmod.static.old ; do
|
---|
[925] | 2718 | s=`which $w 2> /dev/null`
|
---|
| 2719 | if [ -e "$s" ] ; then
|
---|
[3692] | 2720 | tar cf - -C / $s 2> /dev/null | (cd $targetdir ; tar xf -)
|
---|
[925] | 2721 | fi
|
---|
[747] | 2722 | done
|
---|
| 2723 |
|
---|
| 2724 | [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
|
---|
[2951] | 2725 |
|
---|
[2438] | 2726 | # Copy of files mandatory for ssh to automate mount if sshfs is used
|
---|
[3692] | 2727 | mkdir -p $targetdir/.ssh $targetdir/tmp
|
---|
| 2728 | cp -a ~root/.ssh/* $targetdir/.ssh 2> /dev/null
|
---|
| 2729 | cat > $targetdir/tmp/myssh << EOF
|
---|
| 2730 | ssh -o StrictHostKeyChecking=no \$*
|
---|
[2438] | 2731 | EOF
|
---|
[3692] | 2732 | chmod 755 $targetdir/tmp/myssh
|
---|
[2438] | 2733 |
|
---|
[2039] | 2734 | # Copy of files mandatory for ld.so
|
---|
[3692] | 2735 | cp -a /etc/ld.so.c* $targetdir/etc
|
---|
[2039] | 2736 |
|
---|
[2951] | 2737 | # Handle the case where busybox and mount are dynamically linked
|
---|
[3231] | 2738 | file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically"
|
---|
[2951] | 2739 | if [ $? -eq 0 ]; then
|
---|
| 2740 | # We want to use the real mount and all the supported variants (nfs, cifs, ...)
|
---|
[3692] | 2741 | rm -f $targetdir/bin/mount
|
---|
[2951] | 2742 | fi
|
---|
| 2743 |
|
---|
[3522] | 2744 | # Copy of files from the minimal env needed as per the deplist.d/minimal.conf (which includes all busybox deps)
|
---|
[3692] | 2745 | CopyFromConf minimal $targetdir
|
---|
[3357] | 2746 |
|
---|
| 2747 | # For older distributions expecting /sbin/init provides it
|
---|
[3692] | 2748 | if [ ! -e "$targetdir/sbin/init" ]; then
|
---|
| 2749 | (cd $targetdir/sbin ; ln -sf ../usr/sbin/init .)
|
---|
[3357] | 2750 | fi
|
---|
| 2751 |
|
---|
[3000] | 2752 | # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
|
---|
[3692] | 2753 | (cd $targetdir ; ln -sf /bin/bash bin/sh)
|
---|
[3405] | 2754 | LogFile "INFO: Using bash as default shell"
|
---|
[2951] | 2755 |
|
---|
| 2756 | # Avoids an issue on some distro (RHEL5)
|
---|
[3692] | 2757 | rm -f $targetdir/etc/ld.so.conf.d/kernelcap*
|
---|
[2164] | 2758 |
|
---|
[3661] | 2759 | # Management of DRBD
|
---|
| 2760 | which drbdadm &> /dev/null
|
---|
| 2761 | if [ $? -eq 0 ]; then
|
---|
| 2762 | # Do we find DRBD devices setup
|
---|
| 2763 | drbdadm sh-dev all | grep -E '^/dev' &> /dev/null
|
---|
| 2764 | if [ $? -eq 0 ]; then
|
---|
[3692] | 2765 | CopyFromConf drbd $targetdir
|
---|
[3661] | 2766 | fi
|
---|
| 2767 | # DRBD requires net activation
|
---|
| 2768 | MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS drbd"
|
---|
| 2769 | fi
|
---|
| 2770 |
|
---|
[1724] | 2771 | # Management of udev (which includes modprobe in rules)
|
---|
[1759] | 2772 | ps auxww | grep -v grep | grep -qw udevd
|
---|
[1716] | 2773 | if [ $? -eq 0 ]; then
|
---|
[3692] | 2774 | echo "udev device manager found" > $targetdir/tmp/USE-UDEV
|
---|
[3405] | 2775 | LogFile "INFO: udev device manager found"
|
---|
[3692] | 2776 | tar cf - -C / /etc/udev 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in /etc/udev analysis" $templog
|
---|
[3204] | 2777 | # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
|
---|
[3692] | 2778 | rm -f $targetdir/etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
|
---|
[2894] | 2779 | # Do not do it if it's a link (Ubuntu 64 bits #503)
|
---|
[3197] | 2780 | if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
|
---|
[3692] | 2781 | tar cf - -C / /lib64/udev 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in /lib64/udev analysis" $templog
|
---|
[2894] | 2782 | fi
|
---|
[2895] | 2783 | if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [ ! -h "/lib32/udev" ]; then
|
---|
[3692] | 2784 | tar cf - -C / /lib32/udev 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in /lib32/udev analysis" $templog
|
---|
[2895] | 2785 | fi
|
---|
| 2786 | if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [ ! -h "/lib/udev" ]; then
|
---|
[3692] | 2787 | tar cf - -C / /lib/udev 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in /lib/udev analysis" $templog
|
---|
[2895] | 2788 | fi
|
---|
[3261] | 2789 | if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [ ! -h "/usr/lib/udev" ]; then
|
---|
[3692] | 2790 | tar cf - -C / /usr/lib/udev 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in /usr/lib/udev analysis" $templog
|
---|
[3261] | 2791 | fi
|
---|
[3489] | 2792 | if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ] || [ -x /lib/systemd/systemd-udevd ]; then
|
---|
[3692] | 2793 | CopyFromConf udev $targetdir
|
---|
[1720] | 2794 | else
|
---|
[2965] | 2795 | LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
|
---|
[2963] | 2796 | LogAll " mindi will use static devices which may cause problems"
|
---|
[3692] | 2797 | rm -f $targetdir/tmp/USE-UDEV
|
---|
[1720] | 2798 | fi
|
---|
[1716] | 2799 | fi
|
---|
[1786] | 2800 |
|
---|
[2882] | 2801 | # Management of potential HW info (ProLiant only at the moment)
|
---|
[1880] | 2802 | rm -rf $MINDI_CACHE/bkphw
|
---|
| 2803 | mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
|
---|
| 2804 | if [ -d $MINDI_CACHE/bkphw ]; then
|
---|
[3565] | 2805 | LogAll "INFO: Hardware Information found and saved ..."
|
---|
[3692] | 2806 | cp -rp $MINDI_CACHE/bkphw $targetdir
|
---|
[1880] | 2807 | if [ -f $MINDI_CACHE/tools.files ]; then
|
---|
| 2808 | lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
|
---|
[1863] | 2809 | LocateDeps $lis > $MINDI_TMP/tools.lis
|
---|
[3692] | 2810 | tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in tools.lis analysis" $templog
|
---|
[1863] | 2811 | fi
|
---|
[1880] | 2812 | if [ -f $MINDI_CACHE/mindi-rsthw ]; then
|
---|
[3692] | 2813 | mv -f $MINDI_CACHE/mindi-rsthw $targetdir
|
---|
| 2814 | chmod 755 $targetdir/mindi-rsthw
|
---|
[1761] | 2815 | fi
|
---|
[1880] | 2816 | rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
|
---|
[1761] | 2817 | fi
|
---|
| 2818 |
|
---|
[2183] | 2819 | # Management of perl scripts delivered needed at restore time
|
---|
[3522] | 2820 | LogAll "INFO: Analyzing perl modules dependencies..."
|
---|
[3565] | 2821 | mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]*bin/mr-* 2> $templog > $MINDI_TMP/perl.lis || LogAll "ERROR: Problem in mindi-get-perl-modules" $templog
|
---|
[3405] | 2822 | LogFile "DBG4: Perl Modules found:"
|
---|
| 2823 | LogFile "-------------------------"
|
---|
[3403] | 2824 | cat $MINDI_TMP/perl.lis >> $LOGFILE
|
---|
[3405] | 2825 | LogFile "-------------------------"
|
---|
[3692] | 2826 | tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in perl scripts analysis" $templog
|
---|
[2183] | 2827 |
|
---|
[3692] | 2828 | tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in fd dev analysis" $templog
|
---|
[1721] | 2829 |
|
---|
[1885] | 2830 | needed_modules=""
|
---|
[3697] | 2831 | list_of_mods="$CDROM_MODS $FORCE_MODS"
|
---|
[1885] | 2832 |
|
---|
[3270] | 2833 | if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
|
---|
[747] | 2834 | # For PXE boot
|
---|
[3697] | 2835 | list_of_mods="$list_of_mods $NET_MODS"
|
---|
[747] | 2836 | fi
|
---|
[1727] | 2837 | for i in $DENY_MODS; do
|
---|
[2963] | 2838 | LogFile "INFO: Removing $i from the list of modules to load"
|
---|
[3697] | 2839 | list_of_mods=`echo ${list_of_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
|
---|
[1727] | 2840 | done
|
---|
| 2841 |
|
---|
[3253] | 2842 | if [ "${kernelname}" != "" ]; then
|
---|
| 2843 | needed_modules_path=lib/modules/${kernelname}
|
---|
[3257] | 2844 | mkgmopt="-k ${kernelname}"
|
---|
[3253] | 2845 | else
|
---|
| 2846 | needed_modules_path=lib/modules/$KERVERRUN
|
---|
| 2847 | mkgmopt="-k $KERVERRUN"
|
---|
| 2848 | fi
|
---|
[1914] | 2849 |
|
---|
[3565] | 2850 | [ -e "/$needed_modules_path" ] || LogAll "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then mindi won't probably work."
|
---|
[3522] | 2851 | LogAll "INFO: Analyzing kernel modules dependencies..."
|
---|
[3697] | 2852 | needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_mods`
|
---|
[3253] | 2853 |
|
---|
[3257] | 2854 | LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
|
---|
[3692] | 2855 | cp --parents -aL $needed_modules $targetdir/ 2> $templog || LogAll "ERROR: Unable to copy modules to $targetdir" $templog
|
---|
[3253] | 2856 |
|
---|
| 2857 | # Uncompress modules if not using udev and native modprobe
|
---|
[3692] | 2858 | if [ ! -f $targetdir/tmp/USE-UDEV ]; then
|
---|
[3253] | 2859 | for i in $needed_modules; do
|
---|
| 2860 | if [ "`echo "$i" | grep -E ".gz$"`" ]; then
|
---|
[3692] | 2861 | gunzip -f $targetdir/$i
|
---|
[1815] | 2862 | fi
|
---|
[3253] | 2863 | if [ "`echo "$i" | grep -E ".bz$"`" ]; then
|
---|
[3692] | 2864 | bunzip2 -f $targetdir/$i
|
---|
[3253] | 2865 | fi
|
---|
| 2866 | if [ "`echo "$i" | grep -E ".xz$"`" ]; then
|
---|
[3692] | 2867 | unxz -f $targetdir/$i
|
---|
[3253] | 2868 | fi
|
---|
| 2869 | LogFile "INFO: Uncompressing $i"
|
---|
| 2870 | done
|
---|
| 2871 | fi
|
---|
[1815] | 2872 |
|
---|
[2964] | 2873 | # Also copy modules.* in case of udev so that normal modprobe works
|
---|
[3692] | 2874 | tar cf - -C / /$needed_modules_path/modules.* 2> $templog | (cd "$targetdir" ; tar xf -) || LogAll "ERROR: Unable to copy modules.* to $targetdir" $templog
|
---|
[1815] | 2875 |
|
---|
[2680] | 2876 | # Copy FW in case some drivers needs it
|
---|
[3163] | 2877 | for d in "/lib" "/usr/lib"; do
|
---|
[3201] | 2878 | if [ -d "$d/firmware" -a ! -h $d ]; then
|
---|
[3692] | 2879 | cp -a "$d/firmware" "$targetdir$d"
|
---|
[3163] | 2880 | fi
|
---|
| 2881 | done
|
---|
[2680] | 2882 |
|
---|
[3163] | 2883 | # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
|
---|
| 2884 | for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
|
---|
[3201] | 2885 | if [ -d "$d/multipath" -a ! -h $d ]; then
|
---|
[3692] | 2886 | cp -a "$d/multipath" "$targetdir$d"
|
---|
[3163] | 2887 | fi
|
---|
| 2888 | done
|
---|
| 2889 |
|
---|
[3326] | 2890 | # Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
|
---|
[3692] | 2891 | (cd $targetdir/usr/bin ; for i in `ls`; do if [ ! -e "$targetdir/bin/$i" ]; then (cd $targetdir/bin ; ln -sf ../usr/bin/$i .); fi; done)
|
---|
[3324] | 2892 |
|
---|
[2913] | 2893 | # Copy an additional ProLiant tool for OBDR support
|
---|
| 2894 | if [ -f $MINDI_TMP/OBDR ]; then
|
---|
[3117] | 2895 | found=0
|
---|
[2913] | 2896 | if [ -x /usr/bin/hpsa_obdr_mode ]; then
|
---|
[3692] | 2897 | mkdir -p $targetdir/usr/bin
|
---|
| 2898 | cp -a /usr/bin/hpsa_obdr_mode $targetdir/usr/bin
|
---|
[3565] | 2899 | LogAll "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
|
---|
[3117] | 2900 | found=1
|
---|
| 2901 | fi
|
---|
| 2902 | if [ -x /usr/bin/sg_wr_mode ]; then
|
---|
[3692] | 2903 | mkdir -p $targetdir/usr/bin
|
---|
[3135] | 2904 | lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
|
---|
[3118] | 2905 | LocateDeps $lis > $MINDI_TMP/obdr.lis
|
---|
[3692] | 2906 | tar cf - $lis -C / `sort -u $MINDI_TMP/obdr.lis` 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in obdr.lis analysis" $templog
|
---|
[3565] | 2907 | LogAll "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
|
---|
[3117] | 2908 | found=1
|
---|
| 2909 | fi
|
---|
| 2910 | if [ $found -eq 0 ]; then
|
---|
| 2911 | LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
|
---|
[2913] | 2912 | LogAll " This may lead to a tape not going back to sequential mode after OBDR boot"
|
---|
| 2913 | fi
|
---|
| 2914 | fi
|
---|
| 2915 |
|
---|
[3499] | 2916 | if [ ! -e "/sbin/devfsd" ]; then
|
---|
[2963] | 2917 | LogFile "INFO: Deleting devfsd daemon from ramdisk"
|
---|
[2995] | 2918 | [ ! -e "/sbin/devfsd" ] && LogFile " ...because /sbin/devfsd not found"
|
---|
[3692] | 2919 | rm -f $targetdir/sbin/devfsd
|
---|
[747] | 2920 | fi
|
---|
[3692] | 2921 | [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $targetdir/tmp/TAPEDEV-LIVES-HERE
|
---|
[1885] | 2922 | if [ _"$MONDO_SHARE" != _"" ]; then
|
---|
[3692] | 2923 | MakeMondoConfigFile $targetdir/tmp/$MRCFG
|
---|
| 2924 | cp -f $targetdir/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk"
|
---|
| 2925 | cp -f $MINDI_TMP/mountlist.txt $targetdir/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
|
---|
| 2926 | echo -en "$FILES_IN_FILELIST" > $targetdir/tmp/FILES-IN-FILELIST
|
---|
| 2927 | echo -en "$LAST_FILELIST_NUMBER" > $targetdir/tmp/LAST-FILELIST-NUMBER
|
---|
[747] | 2928 | fi
|
---|
[3310] | 2929 |
|
---|
| 2930 | # Create module list to load at restore time
|
---|
[3692] | 2931 | rm -f $targetdir/tmp/modules
|
---|
[3310] | 2932 | for m in $CDROM_MODS; do
|
---|
[3692] | 2933 | echo $m >> $targetdir/tmp/modules
|
---|
[3310] | 2934 | done
|
---|
| 2935 |
|
---|
[3692] | 2936 | mkdir -p $targetdir/proc
|
---|
[2963] | 2937 | LogFile "---------------------------"
|
---|
[3692] | 2938 | LogFile "Content of initial targetdir:"
|
---|
| 2939 | LogFile "---------------------------- "
|
---|
| 2940 | (cd "$targetdir" ; ls -Rla ) >> $LOGFILE
|
---|
[3372] | 2941 | LogFile "---------------------------"
|
---|
[3692] | 2942 | }
|
---|
[2438] | 2943 |
|
---|
[3692] | 2944 | CleanTargetDir() {
|
---|
| 2945 | [ "$targetdir" != "/" ] && rm -rf $targetdir
|
---|
| 2946 | }
|
---|
| 2947 |
|
---|
| 2948 | PatchBootFiles() {
|
---|
| 2949 |
|
---|
| 2950 | # Patch the real value of RAMDISK_SIZE now we have it
|
---|
| 2951 | if [ -d "$bigdir/syslinux" ]; then
|
---|
| 2952 | find $bigdir/syslinux -type f 1> $MINDI_TMP/bootf.lis 2> /dev/null
|
---|
| 2953 | fi
|
---|
| 2954 | if [ -d "$bigdir/EFI" ]; then
|
---|
| 2955 | find $bigdir/EFI -type f 1>> $MINDI_TMP/bootf.lis 2> /dev/null
|
---|
| 2956 | fi
|
---|
| 2957 | for i in `cat $MINDI_TMP/bootf.lis`; do
|
---|
| 2958 | perl -pi -e "s/RAMDISK_SIZE/$ramdisk_size/" $i
|
---|
| 2959 | done
|
---|
| 2960 | rm -f $MINDI_TMP/bootf.lis
|
---|
| 2961 |
|
---|
| 2962 | }
|
---|
| 2963 |
|
---|
| 2964 | MakeBootInitFile() {
|
---|
| 2965 |
|
---|
| 2966 | local mountpoint tempfile res
|
---|
| 2967 | tempfile=$MINDI_TMP/temp.rd
|
---|
| 2968 | res=0
|
---|
| 2969 |
|
---|
| 2970 | LogAll "INFO: Making Boot RAM Disk ($ramdisk_size KB)"
|
---|
| 2971 | dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (MakeBootInitFile)"
|
---|
| 2972 |
|
---|
| 2973 | LogAll "INFO: Creating ext2 filesystem on $tempfile"
|
---|
| 2974 | mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
|
---|
| 2975 | res=$(($res+$?))
|
---|
| 2976 |
|
---|
| 2977 | mountpoint=$MINDI_TMP/mountpoint.$$
|
---|
| 2978 | mkdir -p $mountpoint
|
---|
| 2979 | mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
|
---|
| 2980 | [ "$targetdir" = "/" ] && echo $targetdir | grep -qv $MINDI_TMP && Die "Wrong targetdir $targetdir"
|
---|
| 2981 | mv $targetdir/* $targetdir/.??* $mountpoint || Die "Unable to move files from $targetdir to $mountpoint! Please increase EXTRA_SPACE"
|
---|
| 2982 | res=$(($res+$?))
|
---|
| 2983 | rmdir $targetdir
|
---|
| 2984 |
|
---|
| 2985 | LogFile "INFO: initrd image is $rdz_fname"
|
---|
[1230] | 2986 | # Determine what filesystem to use for initrd image
|
---|
[2963] | 2987 | LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
|
---|
[1230] | 2988 | gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
|
---|
| 2989 | [ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
|
---|
[3008] | 2990 | if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
|
---|
[1230] | 2991 | # say what will be used
|
---|
[2963] | 2992 | LogFile "INFO: Creating an $gvFileSystem initrd image..."
|
---|
[1230] | 2993 | # unmount loop filesystem and create image file using the standard approach
|
---|
[3546] | 2994 | sync
|
---|
[1230] | 2995 | umount $mountpoint || Die "Cannot unmount $tempfile"
|
---|
[3522] | 2996 | dd if=$tempfile bs=1k of=${rdz_fname}.tmp > /dev/null 2> /dev/null
|
---|
[3692] | 2997 | res=$(($res+$?))
|
---|
[3008] | 2998 | if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
|
---|
| 2999 | bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
|
---|
| 3000 | else
|
---|
| 3001 | bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
|
---|
| 3002 | fi
|
---|
[2564] | 3003 | MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
|
---|
[1799] | 3004 | gzip -c9 ${rdz_fname}.tmp > $rdz_fname
|
---|
[3692] | 3005 | res=$(($res+$?))
|
---|
[1764] | 3006 | rm -f ${rdz_fname}.tmp
|
---|
[2390] | 3007 | elif [ "$gvFileSystem" = "initramfs" ]; then
|
---|
[1230] | 3008 | # say what will be used
|
---|
[2963] | 3009 | LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
|
---|
[1230] | 3010 | # make sure that cpio is there
|
---|
| 3011 | which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
|
---|
| 3012 | # create cpio image file and unmount loop filesystem
|
---|
[3524] | 3013 | (cd "$mountpoint" ; find . -print | cpio -o -H newc 2> /dev/null | gzip -9 > $rdz_fname)
|
---|
[3692] | 3014 | res=$(($res+$?))
|
---|
[3546] | 3015 | sync
|
---|
[1230] | 3016 | umount $mountpoint || Die "Cannot unmount $tempfile"
|
---|
[2390] | 3017 | else
|
---|
[1230] | 3018 | Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
|
---|
[2390] | 3019 | fi
|
---|
| 3020 |
|
---|
[3692] | 3021 | # log that we are done
|
---|
[747] | 3022 | if [ "$res" -eq "0" ] ; then
|
---|
[3525] | 3023 | LogAll "INFO: MakeBootInitFile finished without error."
|
---|
[747] | 3024 | else
|
---|
[3525] | 3025 | LogAll "WARNING: MakeBootInitFile exits WITH ERRORS."
|
---|
[747] | 3026 | fi
|
---|
[3692] | 3027 |
|
---|
[747] | 3028 | return 0
|
---|
| 3029 | }
|
---|
| 3030 |
|
---|
| 3031 |
|
---|
| 3032 | ##############################################################################
|
---|
[1021] | 3033 | #----------------------------------- Main -----------------------------------#
|
---|
[747] | 3034 | ##############################################################################
|
---|
| 3035 |
|
---|
[1885] | 3036 | # Now we can create what we need
|
---|
| 3037 | mkdir -p $MINDI_TMP
|
---|
[3692] | 3038 | export bigdir=$MINDI_TMP/bigdir.$$
|
---|
| 3039 | export targetdir=$MINDI_TMP/targetdir.$$
|
---|
[747] | 3040 |
|
---|
[2995] | 3041 | # --nolog needs to be first, and is used in analyze-my-lvm
|
---|
| 3042 | if [ "$1" = "--nolog" ] ; then
|
---|
| 3043 | shift
|
---|
| 3044 | LOGFILE=/dev/stderr
|
---|
| 3045 | else
|
---|
| 3046 | > $LOGFILE
|
---|
| 3047 | fi
|
---|
[1885] | 3048 | if [ "$1" = "--printvar" ] ; then
|
---|
| 3049 | shift
|
---|
| 3050 | if [ _"$1" != _"" ] ; then
|
---|
| 3051 | set | grep -Ew "^$1" | cut -d= -f2
|
---|
| 3052 | fi
|
---|
[2183] | 3053 | exit 0
|
---|
[1885] | 3054 | fi
|
---|
| 3055 |
|
---|
[2963] | 3056 | LogFile "mindi v$MINDI_VERSION"
|
---|
[3513] | 3057 | LogFile "-----------------------------"
|
---|
| 3058 | LogFile "Start date : `date`"
|
---|
| 3059 | LogFile "-----------------------------"
|
---|
[2963] | 3060 | LogFile "$ARCH architecture detected"
|
---|
| 3061 | LogFile "mindi called with the following arguments:"
|
---|
[2978] | 3062 | echo "$@">> $LOGFILE
|
---|
[2963] | 3063 | LogFile "-----------------------------"
|
---|
[3650] | 3064 | pbdistrocheck --version | grep Version >> $LOGFILE
|
---|
[3513] | 3065 | LogFile "pbdistrocheck results:"
|
---|
| 3066 | pbdistrocheck >> $LOGFILE
|
---|
| 3067 | LogFile "-----------------------------"
|
---|
[3650] | 3068 | LogFile "MondoRescue perl module:"
|
---|
| 3069 | mr-getparam --version | grep Version >> $LOGFILE
|
---|
| 3070 | LogFile "-----------------------------"
|
---|
[747] | 3071 |
|
---|
[1010] | 3072 | # Log some capital variables
|
---|
| 3073 | [ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
|
---|
[3149] | 3074 | [ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
|
---|
[2963] | 3075 | LogFile "MONDO_SHARE = $MONDO_SHARE"
|
---|
| 3076 | LogFile "MINDI_LIB = $MINDI_LIB"
|
---|
| 3077 | LogFile "MINDI_SBIN = $MINDI_SBIN"
|
---|
| 3078 | LogFile "MINDI_CONF = $MINDI_CONF"
|
---|
[3388] | 3079 | # Purge from potential old run
|
---|
| 3080 | if [ _"$MINDI_CACHE" = _"" ]; then
|
---|
| 3081 | Die "MINDI_CACHE undefined"
|
---|
| 3082 | else
|
---|
| 3083 | LogFile "MINDI_CACHE = $MINDI_CACHE"
|
---|
| 3084 | fi
|
---|
| 3085 |
|
---|
[1885] | 3086 | if [ -f $MINDI_CONFIG ]; then
|
---|
[2963] | 3087 | LogFile "-----------------------------"
|
---|
| 3088 | LogFile " Mindi configuration file "
|
---|
| 3089 | LogFile "-----------------------------"
|
---|
[1885] | 3090 | grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
|
---|
[2963] | 3091 | LogFile "-----------------------------"
|
---|
[1885] | 3092 | fi
|
---|
[2995] | 3093 | LogFile "In Mindi"
|
---|
| 3094 | LogFile "--------"
|
---|
| 3095 | LogFile "EXTRA_SPACE = $EXTRA_SPACE"
|
---|
| 3096 | LogFile "--------"
|
---|
[1010] | 3097 |
|
---|
[747] | 3098 | trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
|
---|
[1010] | 3099 |
|
---|
| 3100 | # Sanity checks
|
---|
| 3101 | which which > /dev/null 2> /dev/null || Die "Please install 'which'."
|
---|
| 3102 | which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
|
---|
| 3103 | which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
|
---|
| 3104 | which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
|
---|
| 3105 | if which awk &> /dev/null ; then
|
---|
| 3106 | if ! which gawk &> /dev/null ; then
|
---|
[3565] | 3107 | LogAll "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
|
---|
[1010] | 3108 | fi
|
---|
| 3109 | fi
|
---|
| 3110 | which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
|
---|
[2222] | 3111 | [ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
|
---|
[1010] | 3112 |
|
---|
[3005] | 3113 | [ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
|
---|
[1010] | 3114 |
|
---|
| 3115 | # Update the PATH variable if incomplete
|
---|
| 3116 | if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
|
---|
| 3117 | PATH=$PATH:/sbin:/usr/sbin
|
---|
| 3118 | export PATH
|
---|
[2963] | 3119 | LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
|
---|
| 3120 | LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
|
---|
[3255] | 3121 | LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
|
---|
[1010] | 3122 | fi
|
---|
| 3123 |
|
---|
[1737] | 3124 | if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
|
---|
[3368] | 3125 | Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
|
---|
[1010] | 3126 | fi
|
---|
| 3127 |
|
---|
[3149] | 3128 | ### TODO
|
---|
[747] | 3129 | ### Fix as it's not mandatory on ia64
|
---|
| 3130 | if [ "$ARCH" = "ia64" ] ; then
|
---|
[1010] | 3131 | if which elilo &> /dev/null ; then
|
---|
| 3132 | LILO_EXE=elilo
|
---|
| 3133 | else
|
---|
[2024] | 3134 | LILO_EXE=`which false 2> /dev/null`
|
---|
[1010] | 3135 | fi
|
---|
[747] | 3136 | else
|
---|
| 3137 | FindIsolinuxBinary
|
---|
| 3138 | fi
|
---|
| 3139 | trap "Aborted" SIGTERM
|
---|
| 3140 | DONE="\r\t\t\t\t\t\t\t\tDone. "
|
---|
| 3141 | kernelpath=""
|
---|
[1010] | 3142 | MONDO_ROOT=/var/cache/mondo
|
---|
[747] | 3143 | mkdir -p $MONDO_ROOT
|
---|
| 3144 |
|
---|
| 3145 | if [ -d "/proc/lvm" ]; then
|
---|
| 3146 | # LVM v1
|
---|
| 3147 | LVMCMD=""
|
---|
| 3148 | LVM="v1"
|
---|
| 3149 | elif [ -d "/dev/mapper" ]; then
|
---|
| 3150 | # LVM v2
|
---|
| 3151 | LVMCMD="lvm"
|
---|
| 3152 | LVM="v2"
|
---|
| 3153 | else
|
---|
| 3154 | LVM="false"
|
---|
| 3155 | fi
|
---|
[3149] | 3156 |
|
---|
| 3157 | if [ -e "/proc/cmdline" ]; then
|
---|
| 3158 | CMDLINE="/proc/cmdline"
|
---|
| 3159 | elif [ -e "/tmp/cmdline" ]; then
|
---|
| 3160 | CMDLINE="/tmp/cmdline"
|
---|
| 3161 | else
|
---|
| 3162 | CMDLINE="/dev/null"
|
---|
| 3163 | fi
|
---|
| 3164 |
|
---|
[2963] | 3165 | LogFile "INFO: LVM set to $LVM"
|
---|
| 3166 | LogFile "----------"
|
---|
| 3167 | LogFile "mount result:"
|
---|
| 3168 | LogFile "-------------"
|
---|
[1230] | 3169 | mount >> $LOGFILE
|
---|
[3479] | 3170 | if [ -e "/etc/raidtab" ]; then
|
---|
[2963] | 3171 | LogFile "-------------"
|
---|
| 3172 | LogFile "/etc/raidtab content:"
|
---|
| 3173 | LogFile "-------------"
|
---|
[1315] | 3174 | cat /etc/raidtab >> $LOGFILE
|
---|
[3077] | 3175 | else
|
---|
[3073] | 3176 | LogFile "No file /etc/raidtab"
|
---|
[1315] | 3177 | fi
|
---|
[3479] | 3178 | if [ -e "/etc/mdadm.conf" ]; then
|
---|
[2981] | 3179 | LogFile "-------------"
|
---|
| 3180 | LogFile "/etc/mdadm.conf content:"
|
---|
| 3181 | LogFile "-------------"
|
---|
| 3182 | cat /etc/mdadm.conf >> $LOGFILE
|
---|
[3077] | 3183 | else
|
---|
[3149] | 3184 | LogFile "-------------"
|
---|
[3073] | 3185 | LogFile "No file /etc/mdadm.conf"
|
---|
[2981] | 3186 | fi
|
---|
[2963] | 3187 | LogFile "-------------"
|
---|
[3149] | 3188 | LogFile "cat $CMDLINE"
|
---|
[2963] | 3189 | LogFile "-------------"
|
---|
[3149] | 3190 | cat $CMDLINE >> $LOGFILE
|
---|
[2963] | 3191 | LogFile "-------------"
|
---|
| 3192 | LogFile "cat /proc/swaps:"
|
---|
| 3193 | LogFile "-------------"
|
---|
[2014] | 3194 | cat /proc/swaps >> $LOGFILE
|
---|
[2963] | 3195 | LogFile "-------------"
|
---|
[3479] | 3196 | if [ -e "/proc/mdstat" ]; then
|
---|
[3073] | 3197 | LogFile "cat /proc/mdstat:"
|
---|
| 3198 | LogFile "-------------"
|
---|
| 3199 | cat /proc/mdstat >> $LOGFILE
|
---|
[3077] | 3200 | else
|
---|
[3073] | 3201 | LogFile "No pseudo file /proc/mdstat"
|
---|
| 3202 | fi
|
---|
[2981] | 3203 | LogFile "-------------"
|
---|
[2963] | 3204 | LogFile "cat /proc/partitions:"
|
---|
| 3205 | LogFile "-------------"
|
---|
[2015] | 3206 | cat /proc/partitions >> $LOGFILE
|
---|
[2963] | 3207 | LogFile "-------------"
|
---|
| 3208 | LogFile "cat /proc/filesystems:"
|
---|
| 3209 | LogFile "-------------"
|
---|
[2015] | 3210 | cat /proc/filesystems >> $LOGFILE
|
---|
[2963] | 3211 | LogFile "-------------"
|
---|
| 3212 | LogFile "lsmod result:"
|
---|
| 3213 | LogFile "-------------"
|
---|
[1021] | 3214 | lsmod >> $LOGFILE
|
---|
[2431] | 3215 | MODULES="`cat /proc/modules | $AWK '{print $1}'`"
|
---|
[1531] | 3216 | if [ -x /usr/sbin/esxcfg-module ]; then
|
---|
[2963] | 3217 | LogFile "-------------"
|
---|
| 3218 | LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
|
---|
| 3219 | LogFile "-------------"
|
---|
| 3220 | LogFile "VMWare modules"
|
---|
| 3221 | LogFile "-------------"
|
---|
[1531] | 3222 | /usr/sbin/esxcfg-module -l >> $LOGFILE
|
---|
[2431] | 3223 | MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
|
---|
[1497] | 3224 | fi
|
---|
[3149] | 3225 | LogFile "-------------"
|
---|
[2963] | 3226 | LogFile "FORCE_MODS:"
|
---|
| 3227 | LogFile "-------------"
|
---|
[3065] | 3228 | LogFile "$FORCE_MODS"
|
---|
[2963] | 3229 | LogFile "-------------"
|
---|
| 3230 | LogFile "DENY_MODS:"
|
---|
| 3231 | LogFile "-------------"
|
---|
[3065] | 3232 | LogFile "$DENY_MODS"
|
---|
[2963] | 3233 | LogFile "-------------"
|
---|
| 3234 | LogFile "df result:"
|
---|
| 3235 | LogFile "----------"
|
---|
[3117] | 3236 | df -aT >> $LOGFILE
|
---|
[2963] | 3237 | LogFile "-------------"
|
---|
[3117] | 3238 | LogFile "df -i result:"
|
---|
| 3239 | LogFile "----------"
|
---|
| 3240 | df -i >> $LOGFILE
|
---|
| 3241 | LogFile "-------------"
|
---|
| 3242 | if [ -r /boot/grub/menu.lst ]; then
|
---|
| 3243 | LogFile "-------------"
|
---|
| 3244 | LogFile "INFO: /boot/grub/menu.lst content"
|
---|
| 3245 | LogFile "-------------"
|
---|
| 3246 | cat /boot/grub/menu.lst >> $LOGFILE
|
---|
[3123] | 3247 | LogFile "-------------"
|
---|
[3117] | 3248 | fi
|
---|
[3123] | 3249 | if [ -r /boot/grub/grub.conf ]; then
|
---|
[3117] | 3250 | LogFile "-------------"
|
---|
[3123] | 3251 | LogFile "INFO: /boot/grub/grub.conf content"
|
---|
| 3252 | LogFile "-------------"
|
---|
| 3253 | cat /boot/grub/grub.conf >> $LOGFILE
|
---|
| 3254 | LogFile "-------------"
|
---|
| 3255 | fi
|
---|
| 3256 | if [ -r /boot/grub/grub.cfg ]; then
|
---|
| 3257 | LogFile "-------------"
|
---|
| 3258 | LogFile "INFO: /boot/grub/grub.cfg content"
|
---|
| 3259 | LogFile "-------------"
|
---|
| 3260 | cat /boot/grub/grub.cfg >> $LOGFILE
|
---|
| 3261 | LogFile "-------------"
|
---|
| 3262 | fi
|
---|
| 3263 | if [ -r /boot/grub/device.map ]; then
|
---|
| 3264 | LogFile "-------------"
|
---|
[3117] | 3265 | LogFile "INFO: /boot/grub/device.map content"
|
---|
| 3266 | LogFile "-------------"
|
---|
[3123] | 3267 | cat /boot/grub/device.map >> $LOGFILE
|
---|
| 3268 | LogFile "-------------"
|
---|
[3117] | 3269 | fi
|
---|
[3643] | 3270 | if [ -r /boot/grub2/device.map ]; then
|
---|
| 3271 | LogFile "-------------"
|
---|
| 3272 | LogFile "INFO: /boot/grub2/device.map content"
|
---|
| 3273 | LogFile "-------------"
|
---|
| 3274 | cat /boot/grub2/device.map >> $LOGFILE
|
---|
| 3275 | LogFile "-------------"
|
---|
| 3276 | fi
|
---|
[3117] | 3277 | if [ -r /etc/lilo.conf ]; then
|
---|
| 3278 | LogFile "-------------"
|
---|
| 3279 | LogFile "INFO: /etc/lilo.conf content"
|
---|
| 3280 | LogFile "-------------"
|
---|
| 3281 | cat /etc/lilo.conf >> $LOGFILE
|
---|
| 3282 | fi
|
---|
[3378] | 3283 | if [ -d /boot/efi ]; then
|
---|
[3425] | 3284 | gcf=`find /boot/efi -name 'grub.c*'`
|
---|
[3384] | 3285 | if [ _"$gcf" = _"" ]; then
|
---|
[3425] | 3286 | LogFile "Found a /boot/efi directory without a grub config file in it"
|
---|
[3384] | 3287 | else
|
---|
| 3288 | LogFile "-------------"
|
---|
| 3289 | LogFile "INFO: $gcf content"
|
---|
| 3290 | LogFile "-------------"
|
---|
| 3291 | cat $gcf >> $LOGFILE
|
---|
| 3292 | LogFile "-------------"
|
---|
| 3293 | fi
|
---|
[3378] | 3294 | fi
|
---|
| 3295 |
|
---|
[3146] | 3296 | LogFile "Full fdisk info"
|
---|
| 3297 | LogFile "---------------"
|
---|
| 3298 | $FDISK -l >> $LOGFILE
|
---|
| 3299 | LogFile "----------------"
|
---|
[747] | 3300 |
|
---|
[1723] | 3301 | # Compute libata version
|
---|
[2649] | 3302 | laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/ *//g' 2> /dev/null`
|
---|
[1723] | 3303 | # If libata v2 is used then remove ide-generic as it will perturbate boot
|
---|
[1726] | 3304 | if [ "`echo $MODULES | grep libata`" ]; then
|
---|
[1727] | 3305 | if [ "$laver" = "2" ]; then
|
---|
[1726] | 3306 | DENY_MODS="$DENY_MODS ide-generic"
|
---|
[2963] | 3307 | LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
|
---|
| 3308 | LogFile "-------------"
|
---|
[1726] | 3309 | fi
|
---|
[1723] | 3310 | fi
|
---|
| 3311 |
|
---|
[2963] | 3312 | # Check for McAfee which disturbs the access to some files (tgz in articular)
|
---|
[2976] | 3313 | if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
|
---|
[2963] | 3314 | LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
|
---|
| 3315 | LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
|
---|
| 3316 | LogFile "WARNING: You have two options:"
|
---|
| 3317 | LogFile "WARNING: - Exclude all directories with special files (check McAfee System Events Log)"
|
---|
| 3318 | LogFile "WARNING: - Disable the scanner during the backup"
|
---|
| 3319 | fi
|
---|
| 3320 |
|
---|
[1684] | 3321 | #
|
---|
| 3322 | # If we have a USB device we need to store info
|
---|
| 3323 | # and remove it from the parameters line
|
---|
| 3324 | #
|
---|
[747] | 3325 | if [ "$#" -ne "0" ] ; then
|
---|
[1684] | 3326 | if [ "$1" = "--usb" ] ; then
|
---|
| 3327 | shift
|
---|
| 3328 | USBDEVICE=$1
|
---|
| 3329 | if [ _"$USBDEVICE" = _"" ]; then
|
---|
| 3330 | Die "No USB device specified"
|
---|
| 3331 | fi
|
---|
| 3332 | shift
|
---|
| 3333 | fi
|
---|
| 3334 | fi
|
---|
| 3335 |
|
---|
| 3336 | if [ "$#" -ne "0" ] ; then
|
---|
[747] | 3337 | if [ "$1" = "--findkernel" ] ; then
|
---|
[2880] | 3338 | resk=`TryToFindKernelPath`
|
---|
[1336] | 3339 | # Avoids logfile content for mondo
|
---|
| 3340 | export MONDO_SHARE=""
|
---|
[2880] | 3341 | if [ "$resk" = "" ] ; then
|
---|
[2838] | 3342 | if [ $KERNEL_IS_XEN = "yes" ]; then
|
---|
| 3343 | echo "$xenkernelpath"
|
---|
[2963] | 3344 | LogFile "INFO: xenkernelpath = $xenkernelpath"
|
---|
[2860] | 3345 | MindiExit 0
|
---|
[2838] | 3346 | else
|
---|
[2860] | 3347 | MindiExit -1
|
---|
[2838] | 3348 | fi
|
---|
[747] | 3349 | else
|
---|
[2880] | 3350 | echo "$resk"
|
---|
[2963] | 3351 | LogFile "INFO: kernelpath = $resk"
|
---|
[2860] | 3352 | MindiExit 0
|
---|
[747] | 3353 | fi
|
---|
[1720] | 3354 | elif [ "$1" = "--locatedeps" ] ; then
|
---|
| 3355 | [ ! "$2" ] && Die "Please specify the binary to look at"
|
---|
[2438] | 3356 | LocateDeps $*
|
---|
[1720] | 3357 | # Avoids logfile content for mondo
|
---|
| 3358 | export MONDO_SHARE=""
|
---|
| 3359 | MindiExit $?
|
---|
[1815] | 3360 | elif [ "$1" = "--readalllink" ] ; then
|
---|
| 3361 | [ ! "$2" ] && Die "Please specify the binary to look at"
|
---|
| 3362 | # Avoids logfile content for mondo
|
---|
| 3363 | export MONDO_SHARE=""
|
---|
[3231] | 3364 | mr-read-all-link $2
|
---|
[1815] | 3365 | MindiExit $?
|
---|
[3518] | 3366 | elif [ "$1" = "--makebcf" ] ; then
|
---|
[3520] | 3367 | [ ! "$2" ] && Die "Please specify the boot loader to check (syslinux, grub, grub2)"
|
---|
[3518] | 3368 | MakeBootConfFile $2
|
---|
[3519] | 3369 | MindiExit 0
|
---|
[2731] | 3370 | elif [ "$1" = "--makemessage" ] ; then
|
---|
[2948] | 3371 | MakeMessageFile | cut -c1-80
|
---|
[2731] | 3372 | MindiExit 0
|
---|
[747] | 3373 | elif [ "$1" = "--makemountlist" ] ; then
|
---|
| 3374 | [ ! "$2" ] && Die "Please specify the output file"
|
---|
| 3375 | MakeMountlist $2
|
---|
[2432] | 3376 | CheckMountlist $2
|
---|
[1336] | 3377 | # Avoids logfile content for mondo
|
---|
| 3378 | export MONDO_SHARE=""
|
---|
[925] | 3379 | MindiExit $?
|
---|
| 3380 | elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
|
---|
| 3381 | echo "Mindi v$MINDI_VERSION"
|
---|
[1336] | 3382 | # Avoids logfile content for mondo
|
---|
| 3383 | export MONDO_SHARE=""
|
---|
[925] | 3384 | MindiExit 0
|
---|
[3585] | 3385 | elif [ "$1" = "--ironic" ] ; then
|
---|
| 3386 | [ ! "$2" ] && [ ! -f "$2" ] && Die "Please specify the kernel to use"
|
---|
| 3387 | [ ! "$3" ] && [ ! -f "$3" ] && Die "Please specify the initramfs to use"
|
---|
| 3388 | [ "$4" ] && [ "$4" != "UEFI" ] && [ "$4" != "BIOS" ] && Die "Please specify the boot mode as BIOS or UEFI"
|
---|
| 3389 | #TODO: See how we can influence the boot loader
|
---|
| 3390 | [ "$5" ] && [ "$5" != "isolinux" ] && [ "$5" != "grub" ] && [ "$5" != "grub2" ] && Die "Please specify the boot loader as isolinux or grub or grub2"
|
---|
| 3391 | if [ "$5" ]; then
|
---|
| 3392 | boottype=$5
|
---|
| 3393 | fi
|
---|
| 3394 | [ "$6" ] && [ ! -e "$6" ] && Die "Please specify an existing boot loader path for $boottype"
|
---|
| 3395 | if [ "$6" ]; then
|
---|
| 3396 | bootbin=$6
|
---|
| 3397 | fi
|
---|
| 3398 | kernelpath=$2
|
---|
| 3399 | BOOT_TYPE=$4
|
---|
[3590] | 3400 | # Ironic requires some specific boot parameters
|
---|
[3588] | 3401 | MINDI_ADDITIONAL_BOOT_PARAMS="selinux=0 barrier=off udevtimeout=10 systemd.debug-shell boot_method=vmedia"
|
---|
| 3402 | MINDI_BOOT_TIMEOUT=10
|
---|
[3590] | 3403 | EXTRA_SPACE=1500000
|
---|
| 3404 | # Get the local improvements to the configuration
|
---|
[3589] | 3405 | if [ -f $MINDI_CONFIG ]; then
|
---|
| 3406 | . $MINDI_CONFIG
|
---|
| 3407 | fi
|
---|
[3585] | 3408 | PrepareBootDir
|
---|
[3692] | 3409 | PrepareBigDirTar
|
---|
| 3410 | CleanBigDir
|
---|
[3585] | 3411 | cp $3 $MINDI_TMP/initrd.img
|
---|
| 3412 | MakeBootableDevice ISO
|
---|
| 3413 | MindiExit 0
|
---|
[747] | 3414 | elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
|
---|
[940] | 3415 | MONDO_TMP=$2
|
---|
[3661] | 3416 | # Change MINDI_TMP for the one provided by mondo
|
---|
[940] | 3417 | # So that it can get back the built files
|
---|
[2153] | 3418 | if [ _"$MONDO_TMP" = _"" ]; then
|
---|
| 3419 | Die "MONDO_TMP is empty, aborting"
|
---|
| 3420 | fi
|
---|
| 3421 | if [ _"$MONDO_TMP" = _"/" ]; then
|
---|
| 3422 | Die "MONDO_TMP is /, aborting"
|
---|
| 3423 | fi
|
---|
[2092] | 3424 | mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
|
---|
[1010] | 3425 | rmdir $MINDI_TMP
|
---|
[1486] | 3426 | export MINDI_TMP=$MONDO_TMP
|
---|
[953] | 3427 | mkdir -p $MINDI_TMP
|
---|
[2238] | 3428 |
|
---|
[1696] | 3429 | # This is the scratch dir in mondo - subdir images
|
---|
[1880] | 3430 | MINDI_CACHE=$3
|
---|
[3388] | 3431 | LogFile "MINDI_CACHE = $MINDI_CACHE"
|
---|
[2238] | 3432 |
|
---|
[925] | 3433 | kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
|
---|
[2681] | 3434 | [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
|
---|
| 3435 |
|
---|
[747] | 3436 | ###
|
---|
| 3437 | ### Sq-Modification...
|
---|
| 3438 | ### Attempt to locate kernel specific module path
|
---|
| 3439 | ### if module path is found then use it other wise use uname -r to set it...
|
---|
| 3440 | ###
|
---|
[2629] | 3441 | if [ $KERNEL_IS_XEN = "yes" ]; then
|
---|
[3149] | 3442 | LogAll "INFO: xenkernelpath = $xenkernelpath"
|
---|
[2629] | 3443 | fi
|
---|
[2657] | 3444 | kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
|
---|
[3231] | 3445 | if [ ! -d "/lib/modules/$kernelname" ]; then
|
---|
[3149] | 3446 | LogAll "WARNING: Module path for ${kernelpath} not found..."
|
---|
| 3447 | LogAll " using running kernel\'s modules."
|
---|
[2292] | 3448 | kernelname=$KERVERRUN
|
---|
[3149] | 3449 | else
|
---|
[3426] | 3450 | LogAll "INFO: Using modules for kernel: ${kernelname}"
|
---|
[747] | 3451 | fi
|
---|
[3149] | 3452 | LogAll "INFO: kernelname = $kernelname"
|
---|
| 3453 | LogAll "INFO: kernelpath = $kernelpath"
|
---|
[747] | 3454 | ###
|
---|
| 3455 | ### end of Sq-Modification
|
---|
| 3456 | ###
|
---|
[925] | 3457 | TAPEDEV=$5
|
---|
| 3458 | TAPESIZE=$6
|
---|
| 3459 | FILES_IN_FILELIST=$7
|
---|
| 3460 | USE_LZO=$8
|
---|
| 3461 | CDRECOVERY=$9
|
---|
[747] | 3462 | if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
|
---|
| 3463 | IMAGE_DEVS=""
|
---|
| 3464 | else
|
---|
| 3465 | IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
|
---|
| 3466 | fi
|
---|
[925] | 3467 | if [ "${11}" ] ; then
|
---|
| 3468 | LILO_OPTIONS=""
|
---|
[3149] | 3469 | # LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
|
---|
[925] | 3470 | fi
|
---|
| 3471 | LAST_FILELIST_NUMBER=${12}
|
---|
[747] | 3472 | ESTIMATED_TOTAL_NOOF_SLICES=${13}
|
---|
[2564] | 3473 | export MINDI_EXCLUDE_DEVS="${14}"
|
---|
[747] | 3474 | USE_COMP="${15}"
|
---|
| 3475 | USE_LILO="${16}"
|
---|
[925] | 3476 | USE_STAR="${17}"
|
---|
| 3477 | INTERNAL_TAPE_BLOCK_SIZE="${18}"
|
---|
[747] | 3478 | DIFFERENTIAL="${19}"
|
---|
[998] | 3479 | USE_GZIP="${20}"
|
---|
[3353] | 3480 | USE_LZMA="${21}"
|
---|
| 3481 | NOT_BOOT="${22}"
|
---|
[3397] | 3482 | BOOT_TYPE="${23}"
|
---|
[747] | 3483 | [ "$USE_COMP" = "" ] && USE_COMP=yes
|
---|
[998] | 3484 | [ "$USE_GZIP" = "" ] && USE_GZIP=no
|
---|
[3353] | 3485 | [ "$USE_LZMA" = "" ] && USE_LZMA=no
|
---|
[747] | 3486 | [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
|
---|
[3565] | 3487 | [ "$TAPEDEV" ] && LogAll "INFO: This is a tape-based backup. Fine."
|
---|
[1696] | 3488 | # MONDO_ROOT is the real scratchdir
|
---|
[1880] | 3489 | MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
|
---|
[938] | 3490 | if [ _"$MONDO_ROOT" != _"" ]; then
|
---|
| 3491 | mkdir -p $MONDO_ROOT
|
---|
| 3492 | else
|
---|
| 3493 | Die "MONDO_ROOT is undefined"
|
---|
| 3494 | fi
|
---|
[747] | 3495 | else
|
---|
[3585] | 3496 | LogScreen "Syntax: mindi [--custom ....MondoRescue parameters...]"
|
---|
| 3497 | LogScreen " mindi --ironic kernel initrd [BIOS|UEFI] [syslinux|grub|grub2] [/path/to/bootloader]"
|
---|
| 3498 | LogScreen " mindi --locatedeps file"
|
---|
| 3499 | LogScreen " mindi --makemessage"
|
---|
[3586] | 3500 | LogScreen " mindi --findkernel"
|
---|
[3585] | 3501 | LogScreen " mindi --makemountlist file"
|
---|
| 3502 | LogScreen " mindi --makebcf bootloader"
|
---|
| 3503 | LogScreen " mindi -V"
|
---|
[925] | 3504 | MindiExit -1
|
---|
[747] | 3505 | fi
|
---|
| 3506 | fi
|
---|
[2238] | 3507 |
|
---|
| 3508 | if [ _"$MINDI_CACHE" != _"" ]; then
|
---|
| 3509 | rm -rf $MINDI_CACHE/* 2> /dev/null
|
---|
| 3510 | mkdir -p $MINDI_CACHE
|
---|
| 3511 | fi
|
---|
| 3512 |
|
---|
[747] | 3513 | [ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
|
---|
| 3514 |
|
---|
[1684] | 3515 | if [ _"$MONDO_SHARE" = _"" ]; then
|
---|
[3565] | 3516 | LogAll "Mindi Linux mini-distro generator v$MINDI_VERSION"
|
---|
| 3517 | LogAll "Latest Mindi is available from http://www.mondorescue.org"
|
---|
| 3518 | LogAll "BusyBox sources are available from http://www.busybox.net"
|
---|
| 3519 | LogAll "------------------------------------------------------------------------------"
|
---|
[747] | 3520 | else
|
---|
[3426] | 3521 | LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
|
---|
[747] | 3522 | fi
|
---|
[3231] | 3523 | if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
|
---|
[3565] | 3524 | LogAll "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
|
---|
[1005] | 3525 | else
|
---|
[3565] | 3526 | LogAll "ERROR: Unable to find mindi-busybox, please install it"
|
---|
[1005] | 3527 | MindiExit -1
|
---|
| 3528 | fi
|
---|
[747] | 3529 |
|
---|
| 3530 | for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
|
---|
[3111] | 3531 | modinfo $i 2> /dev/null 1> /dev/null
|
---|
[3014] | 3532 | if [ $? -eq 0 ]; then
|
---|
| 3533 | modprobe $i 2>&1 > /dev/null
|
---|
| 3534 | fi
|
---|
[747] | 3535 | done
|
---|
| 3536 |
|
---|
[2963] | 3537 | LogFile "DIFFERENTIAL = $DIFFERENTIAL"
|
---|
| 3538 | LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
|
---|
| 3539 | LogFile "NOT_BOOT = '$NOT_BOOT'"
|
---|
[747] | 3540 | if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
|
---|
[3565] | 3541 | LogAll "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
|
---|
[3278] | 3542 | MakeMondoConfigFile $MINDI_TMP/$MRCFG
|
---|
[940] | 3543 | MakeMountlist $MINDI_TMP/mountlist.txt
|
---|
[2432] | 3544 | CheckMountlist $MINDI_TMP/mountlist.txt
|
---|
[940] | 3545 | mkdir -p $MINDI_TMP/small-all/tmp
|
---|
[3565] | 3546 | cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} $MINDI_TMP/small-all/tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
|
---|
| 3547 | (cd $MINDI_TMP/small-all ; tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log)
|
---|
[747] | 3548 | sleep 2
|
---|
[3565] | 3549 | LogAll "Done. Exiting."
|
---|
[925] | 3550 | MindiExit 0
|
---|
[747] | 3551 | fi
|
---|
| 3552 |
|
---|
[1690] | 3553 | if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
|
---|
[3565] | 3554 | LogAll "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
|
---|
[1684] | 3555 | fi
|
---|
| 3556 |
|
---|
[747] | 3557 | if [ "$kernelpath" = "" ] ; then
|
---|
[1335] | 3558 | [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
|
---|
[3522] | 3559 | echo -en "\nDo you want to use your own kernel to build the boot disk ([y]/n) ?"
|
---|
[966] | 3560 | read ch
|
---|
| 3561 | if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
|
---|
[3651] | 3562 | USE_OWN_KERNEL="yes"
|
---|
[1809] | 3563 | else
|
---|
| 3564 | USE_OWN_KERNEL="no"
|
---|
[747] | 3565 | fi
|
---|
| 3566 | if [ "$USE_OWN_KERNEL" = "yes" ]; then
|
---|
[925] | 3567 | kernelpath=`TryToFindKernelPath`
|
---|
| 3568 | if [ "$kernelpath" = "" ] ; then
|
---|
| 3569 | echo -n "Please enter kernel path : "
|
---|
| 3570 | read kernelpath
|
---|
| 3571 | fi
|
---|
[747] | 3572 | fi
|
---|
| 3573 | fi
|
---|
[3231] | 3574 |
|
---|
[1880] | 3575 | echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
|
---|
[3565] | 3576 | [ "$(($RANDOM%64))" -eq "0" ] && LogAll "INFO: Dude, I've looked inside your computer and it's really dusty..."
|
---|
[747] | 3577 |
|
---|
[3692] | 3578 | PrepareBigDir
|
---|
| 3579 | bigdir_size=`du -sk $bigdir | cut -f1`
|
---|
| 3580 | LogFile "---------------------------"
|
---|
| 3581 | LogFile "INFO: bigdir size is $bigdir_size KB"
|
---|
[1983] | 3582 |
|
---|
[3692] | 3583 | PrepareTargetDir || Die "Could not create initrd.img in target dir"
|
---|
| 3584 | targetdir_size=`du -sk $targetdir | cut -f1`
|
---|
| 3585 | LogFile "---------------------------"
|
---|
| 3586 | LogFile "INFO: targetdir size is $targetdir_size KB"
|
---|
| 3587 | LogFile "---------------------------- "
|
---|
[3522] | 3588 |
|
---|
[3692] | 3589 | # Now we can compute it correctly with some extra in case of...
|
---|
| 3590 | export ramdisk_size=$(($bigdir_size+$targetdir_size+$EXTRA_SPACE))
|
---|
| 3591 | # And now we can patch the value in conf files
|
---|
| 3592 | PatchBootFiles
|
---|
| 3593 | # And tar them
|
---|
| 3594 | PrepareBigDirTar
|
---|
| 3595 | # And prepare boot setup
|
---|
| 3596 | MakeBootInitFile
|
---|
| 3597 | # Now cleans up stuff
|
---|
| 3598 | CleanBigDir
|
---|
| 3599 | CleanTargetDir
|
---|
| 3600 |
|
---|
[747] | 3601 | [ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
|
---|
[3653] | 3602 | ...Or type 'memtest' to test your machine's RAM thoroughly.\n"
|
---|
[747] | 3603 |
|
---|
[1684] | 3604 | if [ _"$MONDO_SHARE" = _"" ]; then
|
---|
[1983] | 3605 | OfferToMakeBootableISO
|
---|
[1684] | 3606 | if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
|
---|
[1983] | 3607 | OfferToMakeBootableUSB
|
---|
[1684] | 3608 | fi
|
---|
[3522] | 3609 | LogAll "INFO: Mindi Finished"
|
---|
[747] | 3610 | elif [ "$TAPEDEV" ] ; then
|
---|
[2078] | 3611 | if [ "$ARCH" != "ia64" ] ; then
|
---|
| 3612 | # We need to keep the img file as boot file for ia64 platform
|
---|
| 3613 | rm -f $MINDI_CACHE/{*img,*iso}
|
---|
| 3614 | else
|
---|
| 3615 | rm -f $MINDI_CACHE/*iso
|
---|
| 3616 | fi
|
---|
[1898] | 3617 | if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
|
---|
[1983] | 3618 | OfferToMakeBootableUSB
|
---|
[1898] | 3619 | fi
|
---|
[1983] | 3620 | OfferToMakeBootableISO
|
---|
[1880] | 3621 | if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
|
---|
| 3622 | cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
|
---|
[747] | 3623 | else
|
---|
[925] | 3624 | Die "Cannot find all.tar.gz, to be written to tape"
|
---|
[747] | 3625 | fi
|
---|
[1695] | 3626 | elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
|
---|
[1983] | 3627 | OfferToMakeBootableUSB
|
---|
[747] | 3628 | else
|
---|
[1983] | 3629 | OfferToMakeBootableISO
|
---|
[747] | 3630 | fi
|
---|
[3391] | 3631 |
|
---|
[3396] | 3632 | if [ -f $MINDI_TMP/$MRCFG ]; then
|
---|
[3425] | 3633 | LogFile "INFO: Your $MRCFG file is:"
|
---|
| 3634 | LogFile "--------------------------"
|
---|
| 3635 | cat $MINDI_TMP/$MRCFG >> $LOGFILE
|
---|
| 3636 | LogFile "--------------------------"
|
---|
[3391] | 3637 | else
|
---|
[3421] | 3638 | if [ _"$MONDO_SHARE" != _"" ] ; then
|
---|
[3565] | 3639 | LogAll "ERROR: You don't have a $MRCFG file !"
|
---|
[3421] | 3640 | fi
|
---|
[3391] | 3641 | fi
|
---|
[747] | 3642 | # cleanup
|
---|
[925] | 3643 | MindiExit 0
|
---|