Context Navigation

source: MondoRescue/branches/3.3/mindi/mindi@ 3702

Visit:

Last change on this file since 3702 was 3702, checked in by Bruno Cornec, 6 years ago
Fix #838 by skipping subvol fstab lines for the mountlist
Property svn:executable set to ``* Property svn:keywords set to `Rev Id`
File size: 127.8 KB

Rev	Line
[747]	1	#!/bin/bash
	2
	3	# $Id: mindi 3702 2018-04-11 00:05:18Z bruno $
	4	#
	5	#-----------------------------------------------------------------------------
	6	# mindi - mini-Linux distro based on the user's filesystem & distribution
	7	#
[1880]	8	# Mindi can create a multi-image boot/root kit. The first image is the boot
[747]	9	# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
	10	# the third disk is data disk #2; and so it goes.
	11	#
	12	# See http://www.mondorescue.org for details.
	13	#-----------------------------------------------------------------------------
	14
	15	### Which arch are we on (useful for ia64 port)
[1565]	16	ARCH=`/bin/uname -m`
[2292]	17	KERVERRUN=`/bin/uname -r`
	18	# By default we use the running kernel as a reference
	19	KERVER=$KERVERRUN
[747]	20
[2442]	21	# In case of problem with udev you can try to add udevdebug
[2564]	22	MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
[3053]	23	MINDI_DEFAULT_BOOT_OPTION="interactive"
	24	# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
	25	# So this parameter only applies to non CD recovery.
	26	MINDI_BOOT_TIMEOUT="300"
[747]	27
[1691]	28	MINDI_REV=PBREV
	29	MINDI_VER=PBVER
[747]	30
	31	MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
	32	MINDI_PREFIX=XXX
	33	MINDI_CONF=YYY
	34	MINDI_SBIN=${MINDI_PREFIX}/sbin
[934]	35	MINDI_LIB=LLL
[3149]	36	MINDI_CACHE=/var/cache/mindi
[747]	37
[3278]	38	MRCFG=mondorestore.cfg
	39
[925]	40	# Temporary directory for mindi
[3499]	41	TMPDIR=${TMPDIR:=/tmp}
	42	if [ ! -d $TMPDIR ]; then
	43	mkdir -p $TMPDIR
	44	fi
[925]	45
[3692]	46	EXTRA_SPACE=20000 # increase if you run out of ramdisk space - Default 20 MB
[747]	47
	48	PROMPT_MAKE_CD_IMAGE="yes"
	49	# Ask if you want to make a CD Image to be written?
[3522]	50	# if this is set to 'no' in the conf file, then the image will be created automatically
[747]	51
[1684]	52	PROMPT_MAKE_USB_IMAGE="yes"
	53	# Ask if you want to make a USB Image to be written?
[3522]	54	# if this is set to 'no' in the conf file, then the image will be created automatically
[1684]	55
[966]	56	USE_OWN_KERNEL="yes"
[747]	57	# If set to "no", you will be prompted for whether or not
	58	# you want to use your own kernel, or the supplied default.
	59	# If "yes" mindi will automatically use your own kernel.
[925]	60
[2629]	61	KERNEL_IS_XEN="no"
	62	# If set to "no", the kernel is not a Xen kernel
	63	# If "yes", mindi will modify isolinux.cfg for the Xen kernel.
[2880]	64	xenkernelpath=""
[2629]	65
[747]	66	MY_FSTAB=/etc/fstab
	67	TAPE_MODS="ht st osst ide-tape ide_tape"
[3693]	68	SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa hpdsa smartpqi dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
[747]	69
	70	# ide-probe-mod
[3661]	71	IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc raid0 raid1 raid456 drbd"
[747]	72	PCMCIA_MODS="pcmcia_core ds yenta_socket"
[3605]	73	USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic hid_microsoft hid-microsoft uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
[3446]	74	NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
[3607]	75	CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 nls_cp437 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash dm-thin-pool multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs ntfs nls_utf8"
[1230]	76	# Replace with that line for HP OCMP e.g.
[2073]	77	#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
[3055]	78	DENY_MODS="kqemu vxfen"
[1399]	79	# Force some modules to be included
[1354]	80	FORCE_MODS=""
[925]	81
[747]	82	LOGFILE=/var/log/mindi.log
	83	BOOT_MEDIA_MESSAGE="\
[3173]	84	To format and restore all files automatically, type '0enuke07' <enter>.\n\
	85	To restore some/all files interactively, type '0einteractive07' <enter>.\n\
	86	To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
	87	To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
	88	\n\
	89	You may add one or more parameters as well as per the function keys below\n\
	90	e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
	91	\n\
	92	If restoring from a local external disk or USB key, do not connect it \n\
	93	until the boot-up has finished.\n\
	94	\n\
	95	\n0eF107-Main \| Boot Parameters 0eF207-1/2 \| 0eF307-2/2 \| 0eF407-PXE\n\
[747]	96	"
[3377]	97	FDISK=$MINDI_SBIN/mr-parted2fdisk
[747]	98
[925]	99	# Using a config file allow to overwrite some values
	100	MINDI_CONFIG="$MINDI_CONF/mindi.conf"
	101	if [ -f $MINDI_CONFIG ]; then
	102	. $MINDI_CONFIG
	103	fi
[1885]	104	DEPLIST_FILE="$MINDI_CONF/deplist.txt"
[2409]	105	DEPLIST_DIR="$MINDI_CONF/deplist.d"
	106
[3502]	107	# Debian 8 system e.g. use xorriso for UEFI support.
	108	# However, they use exactly the same command line parameters as mkisofs, so just
	109	# use it if it's available.
	110	ISO_CMD="/usr/bin/xorriso"
	111
	112	# Mandriva system e.g. use cdrkit, which uses genisoimage.
	113	# However, they use exactly the same command line parameters as mkisofs, so just
	114	# use it if it's available.
	115	if [ ! -x $ISO_CMD ]; then
[3505]	116	ISO_CMD="/usr/bin/genisoimage"
[3515]	117	# For compatibility with previous versions default to mkisofs
	118	if [ ! -x $ISO_CMD ]; then
	119	ISO_CMD="/usr/bin/mkisofs"
	120	fi
	121	if [ ! -x $ISO_CMD ]; then
	122	LogFile "NOTE: No CD image (ISO file) utility found"
	123	ISO_CMD = ""
	124	fi
	125	else
	126	ISO_CMD="/usr/bin/xorriso -as mkisofs"
[3502]	127	fi
	128
[3596]	129	ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi -V MindiCD -o $MINDI_CACHE/mindi.iso "
[925]	130
[3421]	131	# Mindi set this as default in case it's invoked alone
	132	BOOT_TYPE="BIOS"
	133	# and we also check whether we're UEFI or not.
	134	if [ -d "/sys/firmware/efi" ]; then
	135	BOOT_TYPE="UEFI"
[3429]	136	else
	137	# Find MBR in case of bootable USB device to build
	138	MBRFILE=/usr/lib/syslinux/mbr.bin
	139	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
	140	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
	141	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
	142	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
[3421]	143	fi
[3403]	144
[2880]	145	# Function to log on screen only
	146	LogScreen() {
[3368]	147	if [ -e /dev/stderr ] ; then
	148	echo -e "$1" >> /dev/stderr
	149	elif [ -e /usr/bin/logger ] ; then
	150	/usr/bin/logger -s $1
	151	fi
[2880]	152	}
[2685]	153
[2880]	154	# Function to log in log file only
	155	LogFile() {
	156
[3368]	157	echo -e "$1" >> $LOGFILE
	158	if [ _"$2" != _"" ]; then
[3403]	159	grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
[3432]	160	rm -f "$2"
[3368]	161	fi
[2880]	162	}
	163
	164	# Function to log in both screen and logfile
	165	LogAll() {
[3368]	166	LogScreen "$1"
	167	LogFile "$1" "$2"
[2880]	168	}
	169
[2963]	170	# Last function called before exiting
	171	# Parameter is exit code value
	172	# Should be declared here as used immediately below potentialy
	173	MindiExit() {
[3522]	174	LogFile "INFO: Mindi $MINDI_VERSION is exiting"
	175	LogFile "INFO: End date : `date`"
[2963]	176	if [ _"$MONDO_SHARE" != _"" ] ; then
	177	echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
[2995]	178	if [ -f $LOGFILE ]; then
	179	cat $LOGFILE >> /var/log/mondoarchive.log
	180	else
	181	echo "No LOGFILE available in that mindi run" >> /var/log/mondoarchive.log
	182	fi
[2963]	183	echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
	184	fi
[2880]	185
[2963]	186	cd /
	187	sync&
	188
	189	# Clean temporary files only when standalone mindi
	190	if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
	191	rm -Rf $MINDI_TMP
	192	fi
	193	exit $1
	194	}
	195
[2685]	196	Die() {
	197	if [ "$1" = "" ] ; then
[3149]	198	LogAll "FATAL ERROR"
[2685]	199	else
[3149]	200	LogAll "FATAL ERROR. $1"
[2685]	201	fi
	202	if [ _"$2" != _"" ]; then
[3403]	203	grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
[2685]	204	fi
	205	rm -f "$2"
	206
[3149]	207	LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
	208	LogAll "See http://www.mondorescue.org for more information."
	209	LogAll "WE CANNOT HELP unless you enclose that file.\n"
[2685]	210	MindiExit -1
	211	}
	212
[1485]	213	# Now we can create what we need
[2150]	214	MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
	215	if [ $? -ne 0 ]; then
	216	df $TMPDIR
	217	Die "Unable to create a temporary directory ! Check space on $TMPDIR"
	218	fi
[2153]	219	if [ _"$MINDI_TMP" = _"" ]; then
	220	Die "MINDI_TMP is empty, aborting"
	221	fi
	222	if [ _"$MINDI_TMP" = _"/" ]; then
	223	Die "MINDI_TMP is /, aborting"
	224	fi
[2150]	225	export MINDI_TMP
[940]	226
[747]	227	# ----------------------------------------------------------------------------
	228
	229
	230	AbortHere() {
	231	Die "Program is terminating in response to signal received from OS/user"
	232	}
	233
	234
	235	Aborted() {
	236	trap SIGHUP SIGTERM SIGTRAP SIGINT
[1880]	237	[ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindiimg $MINDI_CACHE/gz $MINDI_CACHE/mindi.iso
[747]	238	Die "User abort."
	239	}
	240
	241
	242	AddFileToCfgIfExists() {
	243	[ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
	244	}
	245
	246
	247	AddKeyboardMappingFile() {
	248	local mappath r included_list included_item i res ii sss
	249	mappath=$1
	250	KBDEPTH=$(($KBDEPTH+1))
	251	[ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
	252	if [ -e "$bigdir/$mappath" ] ; then
[3149]	253	LogFile "INFO: $mappath already added"
[747]	254	return
	255	elif [ -d "$bigdir/$mappath" ] ; then
	256	echo "Cannot add $mappath: it's a directory. Sorry."
	257	return
	258	fi
[3149]	259	LogFile "INFO: Added kbd map $mappath"
[747]	260	if [ ! -e "$mappath" ] ; then
[3149]	261	mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[747]	262	if [ ! -e "$mappath" ] ; then
[3149]	263	LogAll "WARNING: Cannot add $mappath: kbd map file not found"
[747]	264	return
	265	fi
	266	fi
	267
[3149]	268	tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log \| (cd "$bigdir" ; tar xf -) \|\| LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
[747]	269	if [ "`echo $mappath \| grep -F ".gz"`" ] ; then
[3023]	270	included_list=`gzip -dc $mappath \| grep -Fi include \| sed s/'"'//g \| cut -d' ' -f2`
[747]	271	else
[3023]	272	included_list=`grep -Fi include $mappath \| sed s/'"'//g \| cut -d' ' -f2`
[747]	273	fi
	274	for included_item in $included_list ; do
[925]	275	if [ ! -e "$included_item" ] ; then
[3149]	276	sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
[1764]	277	[ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
[925]	278	for ii in $sss ; do
[3546]	279	[ -e "$ii" ] && AddKeyboardMappingFile $ii
[925]	280	done
	281	else
	282	AddKeyboardMappingFile $included_item
	283	fi
[747]	284	done
	285	}
	286
	287
	288	CopyDependenciesToDirectory() {
[3403]	289	local outdir incoming counter d found tdir templog
[747]	290	outdir=$1
[3403]	291	templog=$MINDI_TMP/$$.log
[747]	292	mkdir -p $outdir
	293	incoming=`ReadLine`
[3522]	294	counter=$3
[3403]	295	> $templog
	296
[747]	297	while [ "$incoming" != "" ] ; do
[3522]	298	if [ "$3" = "1" ]; then
	299	counter=$(($counter+1))
	300	LogProgress $counter $2
	301	fi
[1526]	302	# Non absolute file names should not arrive till here => skipped
	303	if [ `echo "$incoming" \| cut -c1` != '/' ]; then
[3149]	304	LogAll "WARNING: Unable to handle $incoming"
[1526]	305	incoming=`ReadLine`
	306	continue
	307	fi
	308	# no parent directory of incoming should be a link, copy is not possible in that case
	309	d=`dirname "$incoming"`
	310	found="false"
	311	while [ $d != "/" -a $found = "false" ]; do
	312	[ -h "$d" ] && found="true"
	313	d=`dirname "$d"`
	314	done
[3166]	315	if [ -d "$incoming" -a ! -h "$incoming" ]; then
[3522]	316	find $incoming/* -maxdepth 0 2> /dev/null \| CopyDependenciesToDirectory $outdir 0 0
[1526]	317	elif [ -e "$incoming" ] && [ $found = "false" ]; then
[3075]	318	if [ ! -h "$incoming" ]; then
[3405]	319	tar cf - -C / $incoming 2> $templog \| (cd "$outdir" ; tar xf -) \|\| Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
[3075]	320	else
	321	tdir=`dirname "$incoming"`
	322	if [ ! -e "$outdir/$tdir" ]; then
	323	mkdir -p "$outdir/$tdir"
	324	fi
	325	cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
	326	fi
[1989]	327	# Only uncompress modules if not using udevd
	328	if [ "`echo "$incoming" \| grep "lib/modules/.\..o\.gz"`" != "" ] && [ "`ps auxww \| grep -v grep \| grep -qw udevd`" != "" ]; then
[3149]	329	gunzip -f $outdir/$incoming \|\| LogAll "WARNING: Cannot gunzip $outdir/$incoming"
[925]	330	fi
[3075]	331	[ -x "$outdir" ] && StripExecutable $outdir
[747]	332	fi
	333	incoming=`ReadLine`
	334	done
	335	}
	336
	337
	338	CountItemsIn() {
	339	local r
	340	r=0
	341	for q in $1 ; do
	342	r=$(($r+1))
	343	done
	344	echo $r
	345	}
	346
	347
	348	DropOptimizedLibraries() {
	349	local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
	350	filelist=$1
	351	outdir=$2
	352
	353	list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
	354	if [ "$list_of_optimized_libraries" = "" ] ; then
[859]	355	return 0
[747]	356	fi
	357	echo -en "Dropping i686-optimized libraries if appropriate"
	358	for optimized_lib_name in $list_of_optimized_libraries ; do
[859]	359	echo -en "."
	360	reason=""
[1483]	361	vanilla_lib_name=`echo "$optimized_lib_name" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
[859]	362	echo "$vanilla_lib_name" >> $filelist
[2963]	363	LogFile "INFO: Adding $vanilla_lib_name to filelist"
[859]	364	mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
	365	rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
[2168]	366
	367	# This may return multiple files
[3231]	368	for resolved in `mr-read-all-link $vanilla_lib_name`; do
[2963]	369	LogFile "INFO: Adding as deps $resolved to filelist"
[2168]	370	vanilla_resolved_name=`echo "$resolved" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
[3149]	371	if [ "$vanilla_resolved_name" != "$resolved" ]; then
	372	mkdir -p $outdir$resolved> /dev/null 2> /dev/null
	373	rmdir $outdir$resolved > /dev/null 2> /dev/null
	374	ln -sf $vanilla_resolved_name $outdir$resolved
	375	LogFile "INFO: Excluding deps $resolved"
	376	grep -Fvx "$resolved" "$filelist" > $filelist.tmp
	377	LogFile "INFO: Replacing it with $vanilla_resolved_name"
	378	echo "$vanilla_resolved_name" >> $filelist.tmp
	379	mv -f $filelist.tmp $filelist
	380	fi
[2168]	381	done
[747]	382	done
[925]	383	$AWK '{ print $1; }' $filelist \| sort -u > $filelist.tmp
[747]	384	mv -f $filelist.tmp $filelist
	385	echo -e "$DONE"
	386	}
	387
	388
	389	FindAndAddUserKeyboardMappingFile() {
	390	local r res mapfile mappath included_item included_list keyfile mp locale
[3149]	391	LogAll "INFO: Analyzing your keyboard's configuration."
[3231]	392	KEYDIR=/usr/lib/kbd
[747]	393	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
[3347]	394	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
	395	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
[3231]	396	[ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
[747]	397	if [ ! -e "$KEYDIR" ] ; then
[3149]	398	LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
[747]	399	return 0
[3569]	400	else
	401	LogFile "INFO: KEYDIR=$KEYDIR"
[747]	402	fi
	403	if [ -e "/etc/sysconfig/keyboard" ] ; then
[2963]	404	LogFile "INFO: Red Hat-style config detected."
[747]	405	keyfile=/etc/sysconfig/keyboard
[3257]	406	elif [ -e "/etc/vconsole.conf" ] ; then
	407	LogFile "INFO: New Fedora style config detected."
	408	keyfile=/etc/vconsole.conf
[747]	409	elif [ -e "/etc/rc.d/rc.keymap" ] ; then
[2963]	410	LogFile "INFO: Slackware-style config detected."
[747]	411	keyfile=/etc/rc.d/rc.keymap
	412	elif [ -e "/etc/rc.config" ] ; then
[2963]	413	LogFile "INFO: Debian-style config detected."
[747]	414	keyfile=/etc/rc.config
	415	elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
[2963]	416	LogFile "INFO: Debian-style config detected."
[747]	417	mkdir -p $bigdir/tmp
[3278]	418	echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
[747]	419	KBDEPTH=0
	420	mkdir -p $bigdir/etc/console
[963]	421	cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
[2864]	422	echo ""
[747]	423	echo -e "$DONE"
	424	return 0
[2828]	425	elif [ -e "/etc/console-setup/boottime.kmap.gz" ] \|\| [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
[2963]	426	LogFile "INFO: Ubuntu-style config detected."
[1713]	427	mkdir -p $bigdir/tmp
[2828]	428	if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
	429	kbdfile="/etc/console-setup/boottime.kmap.gz"
	430	else
	431	kbdfile="/etc/console-setup/cached.kmap.gz"
	432	fi
[3278]	433	echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
[1713]	434	KBDEPTH=0
	435	mkdir -p $bigdir/etc/console-setup
[2828]	436	cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
[2864]	437	echo ""
[1713]	438	echo -e "$DONE"
	439	return 0
[3595]	440	elif [ -e "/etc/default/keyboard" ]; then
	441	LogFile "INFO: New Debian-style config detected."
	442	keyfile=/etc/default/keyboard
[2744]	443	elif [ -e "/etc/rc.conf" ] ; then
[2963]	444	LogFile "INFO: ArchLinux config detected."
[2744]	445	keyfile=/etc/rc.conf
[1465]	446	elif [ -e "/etc/conf.d/keymaps" ] ; then
[2963]	447	LogFile "INFO: Gentoo-style config detected."
[1465]	448	keyfile=/etc/conf.d/keymaps
[3191]	449	elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
	450	LogFile "INFO: X11-style config detected."
	451	keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
[747]	452	else
[3149]	453	LogFile "Searching for rc.config ..."
[747]	454	keyfile=`find /etc -name rc.config \| head -n1`
	455	if [ "$keyfile" = "" ] \|\| [ ! -e "$keyfile" ] ; then
[3149]	456	LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
[747]	457	return
	458	else
[2963]	459	LogFile "INFO: Found $keyfile"
[747]	460	fi
	461	fi
	462	if [ ! -e "$KEYDIR/keymaps" ] ; then
[3149]	463	LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
[747]	464	return
	465	fi
[2963]	466	LogFile "INFO: keyfile=$keyfile"
[2999]	467	# For SLES we need to remove the .map.gz extension Cf #614
	468	locale=`grep -F KEYTABLE "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2 \| sed 's/.map.gz$//'`
[747]	469	[ ! "$locale" ] && locale=`grep '.map$' "$keyfile" \| sed 's/^.* //'` # Slackware
[3595]	470	[ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2` # Gentoo, ArchLinux & New fedora
[3191]	471	[ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" \| grep -v '^#' \| awk '{print $3}' \| tr -d '"'` # Fedora 19
[3595]	472	[ ! "$locale" ] && locale=`grep -Ei 'XkbLayout' "$keyfile" \| grep -v '^#' \| cut -d= -f2 \| tr -d '"'` # New Debian 8+
[2963]	473	LogFile "INFO: locale=$locale"
[1764]	474	#
	475	# Process the keymaps dir once for all
	476	# AddKeyboardMappingFile will use it recursively
	477	#
	478	find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
	479	mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep -F "/${locale}." \| grep -vx " #."`
	480	[ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[3571]	481	# For new distro such as RHEL 7 we need that additional search
	482	[ ! "$mp" ] && mp=`grep "xkb" $MINDI_TMP/keymaps.find \| grep -E "/$locale\." \| grep -vx " #."`
[747]	483	# If we have multiple keymaps then log it !!
[3149]	484	echo "$mp" \| grep -q " " >> $LOGFILE
[747]	485	if [ $? -eq 0 ]; then
[2963]	486	LogAll "WARNING: Multiple keymaps found: $mp"
	487	LogFile "INFO: The following one will be used"
[747]	488	fi
	489	for i in $mp ; do
	490	mappath=$i
	491	[ -e "$i" ] && [ ! -d "$i" ] && break
	492	done
	493	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[3688]	494	mappath=$(find /usr /lib /lib64 -path "/kbd/keymaps//$locale \| head -1")
[747]	495	fi
[2963]	496	LogFile "INFO: mappath = $mappath"
[747]	497	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[3149]	498	LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
[747]	499	return
	500	fi
[3535]	501	echo -en "INFO: Adding keyboard mapping tables"
[747]	502	mkdir -p $bigdir/tmp
[3278]	503	echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
[2055]	504	KBDEPTH=0
[747]	505	AddKeyboardMappingFile $mappath
	506	echo -e "$DONE"
[1764]	507	rm -f $MINDI_TMP/keymaps.find
[747]	508	return 0
	509	}
	510
	511
[3241]	512	FindLdlinux32Binary() {
	513	LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
	514	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
	515	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
	516	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
	517	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
[3303]	518	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
	519	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
[3241]	520	#[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 \| grep -x "/.*/ldlinux.c32"`
	521	if [ ! -e "$LDLINUXC32" ]; then
	522	LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
	523	LDLINUXC32=/tmp/idoesnthopefullyexist
	524	else
	525	LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
	526	fi
	527	}
	528
	529
[2629]	530	FindMboot32Binary() {
	531	MBOOTC32=/usr/lib/syslinux/mboot.c32
	532	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
	533	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
	534	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
	535	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
[3303]	536	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
	537	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
[2629]	538	[ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 \| grep -x "/.*/mboot.c32"`
[2921]	539	[ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[2963]	540	LogFile "INFO: Found mboot.c32 at $MBOOTC32"
[2629]	541	}
	542
[3476]	543	FindLdlinuxe64Binary() {
	544	LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
	545	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
	546	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
	547	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
	548	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
	549	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
	550	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 \| grep -x "/.*/ldlinux.e64"`
	551	[ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
	552	LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
	553	}
	554
	555	FindSyslinux64EFI() {
	556	SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
	557	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
	558	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
	559	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
	560	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
	561	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
	562	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi \| grep -x "/.*64/syslinux.efi"`
[3491]	563	[ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[3476]	564	LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
	565	}
	566
[747]	567	FindIsolinuxBinary() {
	568	ISOLINUX=/usr/lib/isolinux.bin
	569	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
[1491]	570	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
[747]	571	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
	572	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
[1491]	573	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
[3304]	574	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
[1854]	575	[ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin \| grep -x "/.*/isolinux.bin"`
[2921]	576	[ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[2963]	577	LogFile "INFO: Found isolinux.bin at $ISOLINUX"
[747]	578	}
	579
	580
	581	GenerateGiantDependencyList() {
[3522]	582	local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item tempdepfile modres noof_lines lvmversion lvmresolved
[747]	583
[3522]	584	echo -en "INFO: Analyzing dependency requirements"
[747]	585	outfile=$1
[940]	586	tempfile=$MINDI_TMP/$$.txt
[747]	587	incoming=`ReadLine`
	588
	589	> $tempfile
	590	progress=0
	591	res=0
	592	noof_lines=$2
	593	while [ "$incoming" != "" ] ; do
[861]	594	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	595	incoming=`ReadLine`
	596	continue
	597	fi
	598	if [ "$incoming" = "LVMFILES:" ] ; then
	599	break
	600	fi
[747]	601	filelist=`GenerateListForFile "$incoming"`
	602	r=$?
[3149]	603	[ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
[747]	604	res=$(($res+$r))
[2963]	605	# LogFile "INFO: '$incoming' generates filelist '$filelist'"
[747]	606	for fname in $filelist ; do
[3321]	607	[ "$fname" != "" ] && echo "$fname" >> $tempfile
[747]	608	done
	609	progress=$(($progress+1))
[3149]	610	LogProgress $progress $noof_lines
[747]	611	incoming=`ReadLine`
	612	done
[861]	613	if [ "$incoming" = "LVMFILES:" ] ; then
	614	incoming=`ReadLine`
	615	lvmversion=""
	616	while [ "$incoming" != "" ] ; do
	617	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	618	incoming=`ReadLine`
	619	continue
	620	fi
	621	filelist=`GenerateListForFile "$incoming"`
	622	for tool in $filelist ; do
[3662]	623	lvmresolved=`readlink -f $tool`
	624	if [ "$tool" = "$lvmresolved" ]; then
	625	echo "$tool" >> $tempfile
	626	elif echo "$lvmresolved" \| grep "lvmiopversion" &> /dev/null ; then
	627	if [ "$lvmversion" = "" ] ; then
	628	lvmversion=`$lvmresolved`
	629	echo "$lvmresolved" >> $tempfile
	630	fi
	631	toolstripped=`echo $tool \| $AWK -F / '{print $NF;}'`
	632	if [ "$lvmversion" = "200" ]; then
	633	# pvdata and lvmcreate_initrd don't exist in LVM2
	634	case "$toolstripped" in
	635	"pvdata")
[861]	636	continue
	637	;;
[3662]	638	"lvmcreate_initrd")
[861]	639	continue
	640	;;
	641	esac
[3662]	642	fi
	643	toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
	644	if [ -e "$toolpath" ] ; then
[861]	645	echo "$toolpath" >> $tempfile
	646	echo "$tool" >> $tempfile
[3662]	647	else
[861]	648	toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
[3662]	649	fi
	650	if [ -e "$toolpath" ] ; then
	651	echo "$toolpath" >> $tempfile
	652	echo "$tool" >> $tempfile
[861]	653	else
[3662]	654	echo "Where are your LVM-Tools? Couldn't find $tool"
	655	fi
	656	else
[861]	657	echo "$tool" >> $tempfile
	658	fi
	659	done
	660	progress=$(($progress+1))
[3149]	661	LogProgress $progress $noof_lines
[861]	662	incoming=`ReadLine`
	663	done
[747]	664	fi
[3661]	665	echo -e "$DONE"
[747]	666
[3661]	667	echo -en "INFO: Making complete dependency list..."
[747]	668	tr -s '/' '/' < $tempfile \| sort -u > $tempfile.new
	669	mv -f $tempfile.new $tempfile
	670	> $outfile.pre
	671	progress=0
	672	noof_lines=`cat $tempfile \| wc -l`
[2963]	673	LogFile "---------------------------------"
	674	LogFile "List of dependencies: "
	675	LogFile "---------------------------------"
[747]	676	for fname in `cat $tempfile` ; do
[1876]	677	echo "$fname" \| tee -a $LOGFILE >> $outfile.pre
	678	LocateDeps $fname \| tee -a $LOGFILE >> $outfile.pre
[925]	679	progress=$(($progress+1))
[3149]	680	LogProgress $progress $noof_lines
[747]	681	done
[1684]	682	if [ _"$MONDO_SHARE" != _"" ]; then
[925]	683	mkdir -p $bigdir/tmp
[3172]	684	mkdir -p $bigdir/usr/bin
[940]	685	if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
[3149]	686	LogAll "\nINFO: Incorporating post-nuke tarball"
[3522]	687	(cd "$bigdir" ; tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log)
[747]	688	fi
[963]	689	if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
[3661]	690	LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
[925]	691	else
[3565]	692	LogAll "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
	693	LogAll " I bet you've got a spare copy of Mondo or Mindi floating around on your system."
[3661]	694	LogAll " If Mindi was called by Mondo then send a bug report."
[3565]	695	LogAll " It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
	696	LogAll " Finally, run Mindi again."
[3661]	697	Die "Odd."
[925]	698	fi
[3565]	699	cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE \|\| LogAll "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
[3270]	700	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3149]	701	LogAll "\nINFO: Incorporating Network-related settings"
[3278]	702	for r in NETFS-* ; do
[963]	703	cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE \|\| Die "Cannot copy $r - did you run out of disk space?"
[2963]	704	LogFile "INFO: Copying $r to ramdisk"
[925]	705	done
	706	fi
[747]	707	fi
[925]	708	tr ' ' '\n' < $outfile.pre \| tr -s '/' '/' \| grep -Fvx "" \| sort -u \| grep -Ev "/libX11\|/libXext\|/libXi\|/libgtk\|/libgdk" > $outfile
[747]	709	rm -f $tempfile $outfile.pre
[3661]	710	[ "$res" -eq "0" ] && echo -e "$DONE" \|\| echo "\nFailed."
[747]	711	return $res
	712	}
	713
	714
	715	GenerateListForFile() {
[3692]	716	local files_found fname incoming
[747]	717	incoming="$1"
	718	files_found=""
	719
	720	for fname in $incoming ; do
	721	files_found="$files_found `LocateFile $fname`"
	722	done
	723
	724	echo "$files_found" \| tr ' ' '\n' \| sort -u \| tr '\n' ' '
	725	}
	726
	727
	728	# Returns all disk devices which are part of a raid array
	729	GetAllRaidMembers() {
	730	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]device/ if(\$2) {print \$2}" < /etc/raidtab
	731	}
	732
	733
	734	GetFileSizeList() {
	735	local i
	736	for i in `find $1 -type d -o -print` ; do
	737	du -sk $i
	738	done
	739	}
	740
	741
[1230]	742	# Check kernel filesystem capabilites for accessing initrd image
[2429]	743	# Could be ext2 FS (old mode) or initramfs (new mode)
[1230]	744	#
	745	# Interface definition:
	746	# param #1: absolute path to kernel image
	747	GetInitrdFilesystemToUse() {
	748
	749	# interface test: make sure we have one parameter
	750	if [ $# -ne 1 ]; then
	751	Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
	752	fi
	753
	754	# interface parameters
	755	local lvKernelImage=$1
	756
	757	# local constants (filesystem magic strings)
	758	local lcMagicCramfs="<3>cramfs: wrong magic"
[2047]	759	local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
[2390]	760	local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
[3353]	761	local lcMagicInitfs="<6>checking if image is initramfs...\|[<]6[>]Unpacking initramfs...\|[<]6[>]Trying to unpack rootfs image as initramfs"
[1230]	762
	763	# local variables
	764	local lvOffset
	765	local lvScanRes
	766	local lvUseFilesystem
	767
	768	# say where we are.
[3111]	769	LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
[1230]	770
	771	# verify that file exists
	772	[ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
	773
[3111]	774	# Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
[1730]	775	file $lvKernelImage 2>&1 \| grep -q gzip
[1566]	776	if [ $? -eq 0 ]; then
[3111]	777	LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
	778	lvScanRes=`gzip -cd $lvKernelImage \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
	779	else
	780	LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
	781	# kernel is x86 boot sector in RHEL3/4 with embedded gzip content
	782	# get offet of gzip magic "1f8b0800" in file (for these older kernels)
	783	lvOffset=`od -vA n -t x1 $lvKernelImage \| tr -d '[:space:]' \| awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
	784	if [ $lvOffset -eq 0 ]; then
	785	LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
	786	lvScanRes=$lcMagicInitfs
[2393]	787	else
[3111]	788	lvOffset=`expr $lvOffset / 2`
	789	LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
	790	# scan again kernel image
	791	lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
[2393]	792	fi
[3111]	793	fi
[2393]	794
[3111]	795	# determine which filesystem to use for initrd image: ext2\|3fs, gzip'ed cpio (initramfs) or cramfs
	796	if [ `echo $lvScanRes \| grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
	797	lvUseFilesystem="ext2fs"
	798	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
	799	lvUseFilesystem="ext3fs"
	800	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
	801	lvUseFilesystem="initramfs"
	802	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
	803	lvUseFilesystem="cramfs"
[2429]	804	else
[3111]	805	# In that case, we are most probably after 2.6.30 and use the supported initramfs
[3181]	806	LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
	807	LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
	808	LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep initramfs"
[1230]	809	lvUseFilesystem="initramfs"
	810	fi
[3111]	811
[1230]	812	# say what we are using
[3111]	813	LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
[1230]	814
	815	# return file system to use
	816	echo "$lvUseFilesystem"
	817
	818	}
	819
[747]	820	# Searches members of raid device
	821	# $1: raid device (/dev/md...)
	822	GetRaidDevMembers() {
[2917]	823	if [ ! -f /etc/raidtab ]; then
	824	return
	825	fi
[747]	826	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
	827	}
	828
	829
	830	ListAllPartitions() {
[3702]	831	grep -Evx " #.\| none." $MY_FSTAB \| $AWK '/^\/dev\/[imhs]d\|\|^LABEL=\/\|^UUID=/ && !/\/fdd\|\/cdr\|\/zip\|\/floppy/ {print $1}' \| sort -u
[747]	832	[ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
[1824]	833	if [ -e "/vmfs/volumes" ]; then
	834	# For VMWare ESX 3 get the device names of these volumes
[2431]	835	vdf -P \| grep -E '/vmfs/volumes' \| $AWK '{print $1}'
[1824]	836	fi
[747]	837	return
	838	}
	839
	840
	841	ListKernelModulePaths() {
[2583]	842	local module_list module fname r kern
[1399]	843	module_list="$MODULES"
[1230]	844	# Remove unwanted modules from list
	845	for i in $DENY_MODS; do
	846	module_list=`echo ${module_list} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
	847	done
[747]	848	###
	849	### Sq-Modification ... Use kernelname for module search path if specified
	850	###
[3231]	851	if [ "${kernelname}" != "" ]
[747]	852	then
	853	kern=${kernelname}
	854	else
[2292]	855	kern="$KERVERRUN"
[747]	856	fi
[2292]	857	export KERVER=$kern
[747]	858	###
	859	### Sq-Mod End
	860	###
[3310]	861	# Get rid of duplicates
	862	for module in `echo $module_list \| tr ' ' '\n' \| sort -u` ; do
[747]	863	r=`find /lib/modules/$kern -type f \| grep "/${module}\..*o" \| tail -n1`
[2471]	864	if [ -z "$r" ]; then
	865	if [ "`echo "$MODULES" \| grep -w $module`" ]; then
	866	r="[live module file not found]"
	867	else
	868	r="[extra module file not found]"
	869	fi
[2583]	870	else
	871	[ -f "$r" ] && echo "$r"
[2471]	872	fi
[2963]	873	LogFile "INFO: module $module --> $r"
[747]	874	done
	875	find /lib/modules/$kern/modules.* -type f 2> /dev/null
	876	}
	877
[1784]	878	#
	879	# Critical function which computes all dependencies (dyn. lib.)
	880	# for a list of binaries
	881	#
[747]	882	LocateDeps() {
	883	local incoming fname deps
[1724]	884	incoming="$*"
[3231]	885	deps=""
	886
[747]	887	for fname in $incoming ; do
	888	if [ ! -e "$fname" ] ; then
[3661]	889	LogFile "WARNING: $fname does not exist; cannot be LDD'd."
[747]	890	if echo $fname \| grep lvm &> /dev/null ; then
[2963]	891	LogFile " This warning only affects you if you are using LVM."
[1399]	892	if echo "$MODULES" \| grep lvm &> /dev/null ; then
[3231]	893	LogFile " I think you are, so please take heed!"
[747]	894	else
[3231]	895	LogFile " I don't think you are, so don't worry about it."
[747]	896	fi
	897	fi
	898	else
[3231]	899	deps="$deps $fname"
[747]	900	fi
	901	done
[3692]	902	mr-read-all-link `mr-process-ldd $deps \| sort -u` $deps \| sort -u
[747]	903	}
	904
[925]	905
[747]	906	LocateFile() {
[3692]	907	local j dn newdn bn path fname_to_find output
[747]	908	fname_to_find="$1"
[1526]	909	# It's an absolute path
[3231]	910	j=`echo "$fname_to_find" \| cut -c1`
	911	if [ _"$j" = _"/" ]; then
	912	dn=`dirname $fname_to_find`
	913	# We suppose that the link is already included, just add the new file
	914	if [ -h "$dn" ]; then
	915	newdn=`readlink -f $dn`
	916	bn=`basename $fname_to_find`
	917	output="$newdn/$bn"
	918	else
	919	output="$fname_to_find"
	920	fi
[860]	921	if [ -h "$output" ] ; then
[3231]	922	output="`mr-read-all-link $output` $output"
[860]	923	fi
[859]	924	echo "$output"
	925	return 0
[747]	926	fi
[1526]	927	# It's not an absolute path
[747]	928	output=""
[1526]	929	for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
	930	#for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
	931	[ -h "$path" ] && continue
	932	[ ! -e "$path/$fname_to_find" ] && continue
	933	output="$path/$fname_to_find $output"
	934	if [ -h "$path/$fname_to_find" ] ; then
[3231]	935	output="`mr-read-all-link $path/$fname_to_find` $output"
[1526]	936	fi
[747]	937	done
	938	if [ "$output" = "" ] ; then
[860]	939	return 1
[747]	940	fi
	941	echo "$output"
	942	return 0
	943	}
	944
[3149]	945	LogProgress() {
[3293]	946	local i progress modres noof_lines title
[3149]	947
	948	progress=$1
	949	noof_lines=$2
[3293]	950	title=$3
[747]	951
[3149]	952	i=$(($progress*100))
	953	if [ $noof_lines -ne 0 ]; then
	954	i=$(($i/$noof_lines))
	955	else
	956	i=0
	957	fi
[3293]	958
	959	if [ _"$MONDO_SHARE" != _"" ]; then
	960	echo "$title $i%"
	961	else
	962	echo -en "\r\t\t\t\t\t\t\t\t"
	963	echo -en "$i"
	964	echo -en "%"
	965	modres=$(($progress%4))
	966	[ "$modres" -eq "0" ] && echo -en "\t/"
	967	[ "$modres" -eq "1" ] && echo -en "\t-"
	968	[ "$modres" -eq "2" ] && echo -en "\t\\"
	969	[ "$modres" -eq "3" ] && echo -en "\t\|"
	970	fi
[3149]	971	}
	972
[3692]	973	# Called by PrepareTargetDir, to make /tmp/$MRCFG
[747]	974	MakeMondoConfigFile() {
[3692]	975	local outfile use_lzo use_comp use_star use_gzip use_lzma
[747]	976	outfile=$1
	977	> $outfile
	978	[ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
	979	[ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
[1698]	980	[ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
[747]	981	[ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
	982	[ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
	983	[ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
	984	use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
[998]	985	use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
[3149]	986	use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
[747]	987	use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
	988	use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
	989	echo "use-lzo $use_lzo" >> $outfile
[998]	990	echo "use-gzip $use_gzip" >> $outfile
[747]	991	echo "use-star $use_star" >> $outfile
[3149]	992	echo "use-lzma $use_lzma" >> $outfile
[747]	993	echo "use-comp $use_comp" >> $outfile
[3397]	994	echo "boot-type $BOOT_TYPE" >> $outfile
[747]	995	echo "datestamp `date`" >> $outfile
	996	[ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
[940]	997	AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
	998	AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
	999	AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
[3278]	1000	AddFileToCfgIfExists $MINDI_TMP/ISO-DIR iso-dir $outfile
[940]	1001	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
	1002	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
[3278]	1003	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER bootloader.ver $outfile
[940]	1004	AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
	1005	AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
	1006	AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
[3278]	1007	AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
	1008	AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
	1009	AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
	1010
[3270]	1011	# Deal with network configuration in a portable way
	1012	if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
	1013	mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
	1014	fi
[747]	1015	}
	1016
[2618]	1017	# Get PV's for an LV
	1018	GetPVsForLV() {
[3692]	1019	local vg
	1020
[3368]	1021	if [ -n "$1" ]; then
	1022	vg=`$LVMCMD lvdisplay $1 2>/dev/null \|awk '/VG Name/{print $NF;exit}'`
	1023	if [ -z "$vg" ]; then
	1024	return
	1025	fi
	1026	$LVMCMD vgdisplay -v $vg 2>/dev/null \| awk '/PV Name/{print $NF}'
	1027	fi
[2618]	1028	}
[747]	1029
[2618]	1030
[747]	1031	MakeMountlist() {
[2907]	1032	local mountlist all_partitions current_partition \
[747]	1033	partition_size partition_format outstring partition_number \
	1034	partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
[2013]	1035	absolute_partition old_partition_fmt current_lvolume uname skip
[747]	1036
[3149]	1037	LogFile "------------------------------------"
[3522]	1038	LogFile "INFO: Your raw fstab file looks like this:"
[2963]	1039	LogFile "------------------------------------"
[747]	1040	cat $MY_FSTAB >> $LOGFILE
[3149]	1041	LogAll "-----------------------------------"
[3522]	1042	LogAll "INFO: Your mountlist will look like this:"
[3149]	1043	LogAll "-----------------------------------"
[747]	1044
[2907]	1045	# mountlist(OUT)
[747]	1046	mountlist=$1
	1047
	1048	# NB: partition = device
	1049	# NB: mountpt = where the device is mounted
	1050
	1051	[ -e "$MY_FSTAB" ] \|\| Die "Cannot find your fstab file ($MY_FSTAB)"
	1052
[3565]	1053	[ "$mountlist" != "" ] && [ "$mountlist" != "/" ] && rm -Rf $mountlist
[747]	1054	> $mountlist
	1055	all_partitions=""
	1056
	1057	if [ $LVM != "false" ]; then
[3499]	1058	LogFile "INFO: Analyzing LVM..."
[968]	1059	$MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
[971]	1060	if [ $? -ne 0 ]; then
[963]	1061	LVM="false"
	1062	fi
[2536]	1063	# Excluded LVs and GVs are not reported here
[2424]	1064	all_partitions=`cat $MINDI_TMP/lvm.res \| grep -F ">>>" \| cut -d' ' -f2-`
[747]	1065	fi
	1066	all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
	1067	for i in $IMAGE_DEVS ; do
	1068	mount \| grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
	1069	done
	1070	[ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" \| tr ' ' '\n' \| sort -u \| tr '\n ' ' '`"
[3149]	1071	printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID \| tee -a $LOGFILE
	1072	printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------ ------- ---------- \| tee -a $LOGFILE
[3028]	1073	useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
[747]	1074	for c_p in $all_partitions ; do
[3702]	1075	# Skip fd/cd devices, network FS, cifs, brtfs subvols
[2452]	1076	[ "`echo "$useless_dev" \| grep -F "$c_p"`" != "" ] \|\| [ "`echo "$c_p" \| grep ":"`" != "" ] \|\| [ "`echo "$c_p" \| grep -E "^//"`" != "" ]&& continue
[747]	1077	[ "`echo "$c_p" \| grep -x "/dev/cdroms.*"`" ] && continue
	1078	if [ -h "$c_p" ] && [ "`echo "$c_p" \| grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/md"`" = "" ] ; then
[861]	1079	current_partition=`readlink -f $c_p`
[3046]	1080	if [ "`echo "$current_partition" \| grep -F "/dev/mapper"`" != "" ]; then
	1081	current_partition="$c_p"
	1082	elif [ "`echo $current_partition \| grep -E '^/dev/dm-'`" ]; then
[3059]	1083	# For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
[3066]	1084	current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
[3046]	1085	fi
[747]	1086	[ "`echo "$useless_dev" \| grep -F "$current_partition"`" ] && continue
	1087	else
	1088	current_partition="$c_p"
	1089	fi
	1090	[ "$c_p" = "none" ] && continue
[3702]	1091
[747]	1092	redhat_label=""
[1831]	1093	label=""
[957]	1094	uuid=""
[861]	1095	absolute_partition=`readlink -f $c_p`
[2965]	1096	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$current_partition" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[747]	1097
[1986]	1098	# set default in case we dont't find it
	1099	str_to_find_fmt_with=$current_partition
	1100
[747]	1101	# This part tries to retrieve the correct device from a LABEL line in /etc/fstab
	1102	# current_partition contains only first column of /etc/fstab
[2965]	1103	if [ "`echo "$current_partition" \| grep -i "LABEL="`" != "" ]; then
[980]	1104	redhat_label=`echo "$current_partition" \| cut -d'=' -f2`
[747]	1105	actual_dev=""
[853]	1106
	1107	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1108	if [ -x "/sbin/findfs" ]; then
[2847]	1109	actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
[853]	1110	fi
[747]	1111
[853]	1112	# 2nd try : blkid, the good way for all LABEL except swap
	1113	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[2965]	1114	actual_dev=`/sbin/blkid \| grep "$redhat_label" \| grep LABEL= \| cut -d':' -f1`
[747]	1115	# For LVM FS it will give a /dev/dm-# which should then be converted
[748]	1116	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1117	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1118	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[747]	1119	for dev in `ls /dev/mapper/*`; do
[963]	1120	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1121	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[747]	1122	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1123	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[747]	1124	break
	1125	fi
	1126	done
	1127	fi
	1128	fi
	1129
[853]	1130	# 3rd try, which works on a standard partition (ext2/3), but not on swap
[747]	1131	# For LVM gives a /dev/mapper entry
	1132	if [ "x$actual_dev" = "x" ]; then
[2965]	1133	actual_dev=`/bin/mount -l \| grep "\[$redhat_label\]" \| cut -d' ' -f1`
[747]	1134	fi
	1135
[853]	1136	# 4th try, with vol_id
[747]	1137	# SWAP only
	1138	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[2965]	1139	list_swaps=`cat /proc/swaps \| grep "/dev/" \| $AWK '{ print $1 }' `
[747]	1140	for dev_swap in $list_swaps ; do
[2965]	1141	dev_exists=`/sbin/vol_id $dev_swap \| grep "$redhat_label"`
[747]	1142	if [ "x$dev_exists" != "x" ]; then
	1143	actual_dev=$dev_swap
	1144	break;
	1145	fi
	1146	done
	1147	fi
	1148
[853]	1149	# 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
[789]	1150	# LABEL=SW-cciss/c0d0p3 (RDP)
[853]	1151	# or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
[747]	1152	# SWAP only
[2965]	1153	if [ "x$actual_dev" = "x" -a _"`echo $current_partition \| grep -iE 'LABEL=SWAP\|LABEL=SW-'`" != _"" ]; then
[2013]	1154	skip=""
[2292]	1155	uname=$KERVERRUN
[2013]	1156	[ "`echo $uname \| grep "2.4.[0-9]"`" != "" ] && skip=16
	1157	# 2.6.12 needs 16 (FC3)
	1158	[ "`echo $uname \| grep "2.6.[0-1]"`" != "" ] && skip=16
	1159	# 2.6.19 and upper needs 1052
	1160	[ "`echo $uname \| grep "2.6.19"`" != "" ] && skip=1052
	1161	[ "`echo $uname \| grep "2.6.[2-9]"`" != "" ] && skip=1052
[2892]	1162	[ "`echo $uname \| grep "3.[0-9].[0-9]"`" != "" ] && skip=1052
[2013]	1163	if [ $skip = "" ]; then
	1164	Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
	1165	fi
[853]	1166	for try_dev in `tail +2 /proc/swaps \| cut -d' ' -f1`
	1167	do
	1168	# Location of the swap label for kernel 2.6
[2013]	1169	try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
[853]	1170	if [ "x$try_dev_label" = "x$redhat_label" ]; then
[855]	1171	actual_dev=$try_dev
[853]	1172	fi
	1173	done
[747]	1174	fi
[1008]	1175
	1176	# Check if one of all those tries has known success
	1177	if [ "x$actual_dev" != "x" ]; then
	1178	current_partition=$actual_dev
	1179	else
[1885]	1180	Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
[1008]	1181	fi
[957]	1182	# This part tries to retrieve the correct device from a UUID line in /etc/fstab
	1183	# current_partition contains only first column of /etc/fstab
[2965]	1184	elif [ "`echo "$current_partition" \| grep -i "UUID="`" != "" ]; then
[980]	1185	uuid=`echo "$current_partition" \| cut -d'=' -f2`
[957]	1186	actual_dev=""
	1187
	1188	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1189	if [ -x "/sbin/findfs" ]; then
	1190	actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
	1191	fi
	1192
[1531]	1193	# 2nd try : blkid, the good way for all UUID except swap
[957]	1194	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[2965]	1195	actual_dev=`/sbin/blkid \| grep "$uuid" \| grep UUID= \| cut -d':' -f1`
[957]	1196	# For LVM FS it will give a /dev/dm-# which should then be converted
	1197	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1198	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1199	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[957]	1200	for dev in `ls /dev/mapper/*`; do
[963]	1201	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1202	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[957]	1203	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1204	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[957]	1205	break
	1206	fi
	1207	done
	1208	fi
	1209	fi
	1210
	1211	# 3th try, with vol_id
	1212	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[2965]	1213	list_dev=`mount \| grep -E '^/' \| $AWK '{ print $1 }' `
[957]	1214	for dev in $list_dev ; do
[2965]	1215	dev_exists=`/sbin/vol_id $dev \| grep "$uuid"`
[957]	1216	if [ "x$dev_exists" != "x" ]; then
	1217	actual_dev=$dev
	1218	break;
	1219	fi
	1220	done
	1221	fi
	1222
[1531]	1223	# 4th try, with dumpuuid (VMWare only ?) for swap
	1224	if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
[2965]	1225	list_dev=`cat /proc/swaps \| grep -E '^/' \| $AWK '{ print $1 }' `
[1531]	1226	for dev in $list_dev ; do
[2965]	1227	dev_exists=`/sbin/dumpuuid $dev \| grep "$uuid"`
[1531]	1228	if [ "x$dev_exists" != "x" ]; then
	1229	actual_dev=$dev
	1230	break;
	1231	fi
	1232	done
	1233	fi
	1234
[747]	1235	# Check if one of all those tries has known success
	1236	if [ "x$actual_dev" != "x" ]; then
	1237	current_partition=$actual_dev
	1238	else
[2069]	1239	Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs\|blkid\|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
[747]	1240	fi
	1241	else
[1863]	1242	# Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
	1243	# they use symlinks in fstab unrelated to what is shown in mount !
	1244	if [ _"$partition_mountpt" = _"" ]; then
[1986]	1245	# set default in case we dont't find it
[2965]	1246	for tmpp in `tr -s '\t' ' ' < $MY_FSTAB \| grep -Ev "^#" \| $AWK '{print $1}'`; do
[3084]	1247	if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
[1863]	1248	str_to_find_fmt_with=$tmpp
[2965]	1249	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$tmpp" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[1864]	1250	break;
[1863]	1251	fi
	1252	done
	1253	fi
[747]	1254	fi
	1255
[3702]	1256	# Avoid analyzing btrfs subvol partitions
	1257	partition_option=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$str_to_find_fmt_with" \| grep -vx " #." \| $AWK '{print $4}' \| grep -v 'subvol=' \| head -n1`
[3084]	1258	# Detects noauto partitions not mounted and exclude them
	1259	if [ "`echo "$partition_option" \| grep -i noauto`" != "" ] && [ "`mount \| grep -w "$partition_mountpt"`" = "" ] ; then
[3702]	1260	LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
[3084]	1261	continue
	1262	fi
	1263	# Detects bind partitions and exclude them
	1264	if [ "`echo "$partition_option" \| grep -iw bind`" != "" ]; then
[3702]	1265	LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
[3084]	1266	continue
	1267	fi
	1268
[2566]	1269	# Look for devices which have to be excluded
	1270	skip=0
	1271	if [ "$MINDI_EXCLUDE_DEVS" ] ; then
[2568]	1272	l=""
[3231]	1273	list_of_devices="`mr-read-all-link $current_partition`"
[2568]	1274	for d in $list_of_devices; do
[2579]	1275	l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
[2568]	1276	done
[2618]	1277
	1278	# Remove PVs from LVs excluded
	1279	l="$l `GetPVsForLV $current_partition`"
	1280
	1281	# We want a single unique list
[3522]	1282	list_of_devices="`echo $l \| tr ' ' '\n' \| sort -u`"
[2618]	1283
[2854]	1284	for d in `echo $MINDI_EXCLUDE_DEVS \| sed 's/\|/ /g'`; do
[2568]	1285	if [ "`echo " $list_of_devices " \| grep " $d"`" != "" ]; then
[2963]	1286	LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
[2566]	1287	skip=1
	1288	continue
	1289	fi
	1290	done
	1291	fi
	1292	if [ $skip -eq 1 ]; then
	1293	continue
	1294	fi
	1295
[3702]	1296	# sort in case of btrfs subvol
	1297	partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB \| sort -u`
[3028]	1298	# Detects iso9660 ISO images and exclude them
	1299	if [ "`echo "$partition_format" \| grep -iw iso9660`" != "" ]; then
[3064]	1300	LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
[3028]	1301	continue
	1302	fi
[747]	1303	# Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
	1304	# for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
	1305	# the former is then a link to the latter, so we test whether
	1306	# $current_partition is actually such a link or not and set
[755]	1307	# $current_lvolume accordingly. On Debian you may find more than one answer
	1308	# so we remove the one corresponding to /dev/.static
	1309	# On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
	1310	# principle is the same and we need to find the link to it as well.
	1311	# Note that $current_lvolume may well be an
[747]	1312	# ordinary device. It is just to make sure that we feed the right value
	1313	# into any of the LVM tools if possible.
	1314
[3064]	1315	current_lvolume="$current_partition"
[763]	1316	if [ $LVM = "v2" ] && [ "`echo $current_partition \| grep -E '^/dev/mapper/'`" ]; then
[755]	1317	# .static dir are a Debian specificity
[763]	1318	current_lvolume="`find /dev -lname "$current_partition" \| grep -Ev '^/dev/\.static/'`"
[755]	1319	echo $current_lvolume \| grep -q ' '
[784]	1320	if [ $? -eq 0 ]; then
[2963]	1321	LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
[755]	1322	fi
[2072]	1323	# if it's not found, it may well be a real device such as a multipath one
	1324	# /dev/mapper/mpath... Thus we revert the situation so that next test succeed
	1325	if [ _"$current_lvolume" = _"" ]; then
	1326	current_lvolume="$current_partition"
	1327	fi
[747]	1328	fi
	1329	#
	1330	# End of LVM device style variation code (other than $current_lvolume).
	1331
[745]	1332	if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
	1333	# Size computed via LVM not directly
[747]	1334	partition_size="lvm"
	1335	else
	1336	[ "`echo "$current_partition" \| grep "[0-9]"`" = "" ] && continue
	1337	[ "`echo "$current_partition" \| grep -c "^/"`" -ne "1" ] && continue
	1338	if [ "$partition_format" = "swap" ] \|\| [ "$partition_mountpt" = "swap" ] ; then
[2947]	1339	# Skip swap files
	1340	[ "`echo "$current_partition" \| grep -E "^/dev"`" = "" ] && continue
[2919]	1341	partition_size=`grep -Fv "Priority" /proc/swaps \| tr -s '\t' ' ' \| grep -F "$current_partition " \| $AWK '{print $3}'`
[747]	1342	[ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
[3368]	1343	[ "$partition_format" != "swap" ] && partition_format="swap"
[747]	1344	if [ "$partition_size" = "" ] ; then
[3368]	1345	totalsize=0
	1346	items=0
	1347	for i in `tr -s ' ' '\t' < /proc/swaps \| grep -Fv "Filename" \| cut -f3` ; do
[747]	1348	totalsize=$(($totalsize+$i))
	1349	items=$(($items+1))
[3368]	1350	done
	1351	[ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) \|\| partition_size=0
	1352	[ "$partition_size" -lt "125000" ] && partition_size=125000
	1353	LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
[747]	1354	fi
[2947]	1355	else
	1356	partition_size=`SizeOfPartition $current_partition`
[747]	1357	fi
	1358	fi
	1359	[ "$partition_mountpt" = "swap" ] && partition_format="swap"
	1360	[ "$partition_format" = "swap" ] && partition_mountpt="swap"
	1361	if [ "$partition_mountpt" = "" ] ; then
	1362	if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
	1363	if [ "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
	1364	partition_mountpt="raid"
	1365	partition_format="raid"
	1366	else
	1367	partition_mountpt="lvm"
	1368	partition_format="lvm"
	1369	fi
	1370	fi
	1371	fi
	1372	psz=$partition_size
[2963]	1373	LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
[747]	1374	[ "$psz" != "lvm" ] && psz=$(($psz/1024))
	1375	if [ "`echo " $IMAGE_DEVS " \| grep -F " $current_partition "`" != "" ] ; then
	1376	partition_mountpt="image"
	1377	old_partition_fmt=$partition_format
	1378	partition_format="`$FDISK -l 2>> $LOGFILE \| tr '*' ' ' \| tr '+' ' ' \| tr -s ' ' '\t' \| grep -w "$absolute_partition" \| cut -f5`"
	1379	partition_size=$(($partition_size+1)); # just in case
	1380	if [ "$partition_format" = "Linux" ] ; then
[2963]	1381	LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
	1382	LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
[747]	1383	partition_format=$old_partition_fmt
	1384	fi
	1385	fi
[2566]	1386
[747]	1387	if [ ! "$partition_mountpt" ] ; then
[2963]	1388	LogFile "------- $FDISK -l $qq log ------------"
[1883]	1389	for qq in "" `find /dev/ida/cd ! -name 'p' 2> /dev/null`; do
[747]	1390	partition_format=`$FDISK -l $qq 2>> $LOGFILE \| grep -w "$c_p" \| sed 's/12/\|/' \| tr -s '\t' ' ' \| cut -d'\|' -f2 \| cut -d' ' -f2-9`
	1391	[ "$partition_format" ] && break
	1392	done
[2963]	1393	LogFile "------- $FDISK log end ------------"
[747]	1394	if [ "$partition_format" = "Compaq diagnostics" ] ; then
	1395	partition_format="compaq"
	1396	elif [ ! "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
[3149]	1397	LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
[747]	1398	continue
	1399	fi
	1400	fi
[1755]	1401	if [ "$redhat_label" ]; then
	1402	label="$redhat_label"
[1756]	1403	elif [ "$uuid" ]; then
[1755]	1404	label="$uuid"
	1405	fi
[3330]	1406
	1407	# On RHEL 7 they use UUID concretely, even when not mentioned in fstab
	1408	# in order to mount the root part e.g. in grub.
	1409	# One way to solve this is to add the UUID now, if there wasn't one so it's
	1410	# restored correctly
	1411	if [ _"$label" = _"" ]; then
	1412	label=`blkid $current_partition \| perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
	1413	fi
	1414
[747]	1415	partition_format="`echo "$partition_format" \| cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
[963]	1416	[ "$partition_format" = "auto" ] && partition_format="`mount \| grep -w $current_partition \| $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
[3149]	1417	unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
[747]	1418	if [ "$current_partition" = "" ] ; then
[2963]	1419	LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
[747]	1420	elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
	1421	if [ "`grep -F device /etc/raidtab 2>/dev/null \| grep -F $current_partition`" ] ; then
	1422	partition_mountpt=raid
	1423	partition_format=raid
[3149]	1424	printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
[1755]	1425	printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1426	else
[2963]	1427	LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
[747]	1428	fi
	1429	elif [ "$partition_format" = "" ] ; then
[2963]	1430	LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
[747]	1431	elif [ "$partition_size" = "" ] ; then
[2963]	1432	LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
[747]	1433	elif [ "$partition_mountpt" = "/proc" ] \|\| [ "$partition_mountpt" = "/dev/pts" ] ; then
	1434	continue
	1435	else
	1436	if [ "$partition_format" = "dos" ] \|\| [ "$partition_format" = "msdos" ] ; then
[3522]	1437	LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
[747]	1438	partition_format="vfat"
	1439	fi
[3149]	1440	printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
[1755]	1441	printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1442	fi
	1443	done
[3149]	1444	LogAll "-----------------------------------"
[747]	1445	}
	1446
[2432]	1447	CheckMountlist() {
	1448	local file=$1
	1449	# Coherency verification
[2529]	1450	ML01=`cat $file \| wc -l`
[2995]	1451	ML02=`grep -vE ' lvm \| raid \| swap ' $file \| wc -l`
[2432]	1452	ML1=`$AWK '{print $1}' $file \| sort -u \| wc -l`
[3024]	1453	ML2=`grep -vE ' lvm \| raid \| swap ' $file \| $AWK '{print $2}' \| sort -u \| wc -l`
[2529]	1454	if [ "$ML01" -ne "$ML1" ]; then
[2963]	1455	LogFile "--------------------------------------------"
[3081]	1456	LogAll "WARNING: Duplicate device entry in mountlist"
[2963]	1457	LogFile "--------------------------------------------"
[2432]	1458	fi
[2529]	1459	if [ "$ML02" -ne "$ML2" ]; then
[2963]	1460	LogFile "--------------------------------------------"
	1461	LogAll "WARNING: Duplicate mountpoint entry in mountlist"
	1462	LogFile "------------------------------------------------"
[2432]	1463	fi
	1464	}
[747]	1465
[3476]	1466
[3522]	1467	MakeISOErrors() {
[3421]	1468
[3522]	1469	LogFile "----------- $ISO_CMD's errors --------------"
[3596]	1470	LogAll "Command invoked: $CMD ."
[3522]	1471	LogAll "$ISO_CMD returned the following errors:"
	1472	cat $MINDI_TMP/mkisofs.log \| tee -a $LOGFILE
	1473	LogAll "ERROR: Failed to create ISO image."
	1474	}
[3499]	1475
[3532]	1476	MakeISO() {
	1477
[3596]	1478	LogAll "INFO: Generating ISO image."
[3608]	1479	LOCISO=`echo $CMD \| perl -p -e 's\|.* -o (.+)/mindi.iso .*\|$1\|'`
[3532]	1480	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
	1481	if [ $? -ne 0 ] ; then
[3596]	1482	# In case of UEFI handle differences in option handling
[3532]	1483	if [ "$BOOT_TYPE" = "UEFI" ]; then
	1484	CMD=`echo $CMD \| perl -p -e 's\|--efi-boot \|-eltorito-platform 0xEF -eltorito-boot \|; s\|-efi-boot \|-eltorito-platform 0xEF -eltorito-boot \|;'`
	1485	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
[3596]	1486	if [ $? -ne 0 ] ; then
	1487	# xorriso e.g.
	1488	CMD=`echo $CMD \| perl -p -e 's\|-eltorito-platform 0xEF \|\|'`
	1489	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
	1490	if [ $? -eq 0 ] ; then
	1491	LogAll "INFO: Invoking $CMD ."
[3608]	1492	LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
[3596]	1493	else
	1494	MakeISOErrors
[3599]	1495	fi
[3596]	1496	else
	1497	LogAll "INFO: Invoking $CMD ."
[3608]	1498	LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
[3532]	1499	fi
	1500	else
	1501	MakeISOErrors
	1502	fi
	1503	else
[3596]	1504	LogAll "INFO: Invoking $CMD ."
[3608]	1505	LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
[3532]	1506	fi
	1507	rm -f $MINDI_TMP/mkisofs.log
	1508	}
	1509
[3522]	1510	MakeBootableDevice() {
[3499]	1511
[3522]	1512	local target tbc retval part size mount_opt
	1513
	1514	target="$1"
	1515
	1516	rm -Rf $MINDI_TMP/target
	1517	mkdir -p $MINDI_TMP/target/{images,archives,tmp}
	1518
	1519	LogAll "INFO: Copying $MINDI_CACHE/*.gz to $MINDI_TMP/target/images"
	1520	cp -f $MINDI_CACHE/*.gz $MINDI_TMP/target/images 2>> $LOGFILE \|\| LogAll "WARNING: MakeBootableDevice: Cannot copy files to $MINDI_TMP/target/images"
	1521	for i in memdisk memtest.bin memtest.img ; do
	1522	j=$MINDI_LIB/$i
	1523	k=$MINDI_TMP/target
	1524	if [ -e "$j" ] ; then
	1525	LogAll "INFO: Copying $j to $k"
	1526	cp -f $j $k 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $k"
	1527	cp -f $j $MINDI_TMP 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $MINDI_TMP"
	1528	if [ _"$MONDO_SHARE" != _"" ]; then
	1529	cp -f $j $MONDO_ROOT 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $MONDO_ROOT"
[3499]	1530	fi
[3522]	1531	fi
	1532	done
[3499]	1533
[3522]	1534	retval=0
	1535	LogAll "INFO: Copying $kernelpath to $MINDI_TMP/target/vmlinuz"
	1536	cp $kernelpath $MINDI_TMP/target/vmlinuz 2>> $LOGFILE
[3528]	1537	if [ $? -ne 0 ] ; then
[3522]	1538	LogAll "ERROR: Failed to copy $kernelpath $MINDI_TMP/target/"
	1539	retval=$(($retval+1))
	1540	fi
	1541	LogAll "INFO: Copying $MINDI_TMP/initrd.img to $MINDI_TMP/target/initrd.img"
	1542	cp $MINDI_TMP/initrd.img $MINDI_TMP/target/ 2>> $LOGFILE
[3528]	1543	if [ $? -ne 0 ] ; then
[3522]	1544	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MINDI_TMP/target/"
	1545	retval=$(($retval+1))
	1546	fi
[3421]	1547
[3692]	1548	# copy boot stuff now generated in PrepareBigDir
[3522]	1549	if [ "$BOOT_TYPE" = "UEFI" ]; then
	1550	(cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
	1551	tbc="EFI"
[3528]	1552	# Also prepare a BIOS compatible boot
	1553	if [ "$target" = "ISO" ]; then
	1554	cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
	1555	fi
[3522]	1556	else
	1557	(cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
	1558	tbc="syslinux"
	1559	if [ -f "$MINDI_TMP/target/$tbc/syslinux.cfg" ]; then
	1560	LogFile "----------- syslinux's conf --------------"
	1561	cat $MINDI_TMP/target/$tbc/syslinux.cfg >> $LOGFILE
	1562	LogFile "------------------------------------------"
	1563	fi
	1564	if [ "$target" = "ISO" ]; then
	1565	cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
[3528]	1566	if [ $? -ne 0 ] ; then
[3522]	1567	LogAll "ERROR: Failed to copy $ISOLINUX to $MINDI_TMP/target/$tbc"
	1568	retval=$(($retval+1))
[3476]	1569	fi
[3522]	1570	fi
	1571	fi
[3476]	1572
[3522]	1573	if [ "$ARCH" != "ia64" ] ; then
	1574	if [ $KERNEL_IS_XEN = "yes" ]; then
	1575	FindMboot32Binary
	1576	cp $xenkernelpath $MINDI_TMP/target/xen.gz 2>> $LOGFILE
[3528]	1577	if [ $? -ne 0 ] ; then
[3522]	1578	LogAll "ERROR: Failed to copy $xenkernelpath to $MINDI_TMP/target/"
	1579	retval=$(($retval+1))
[1885]	1580	fi
[3522]	1581	cp $MBOOTC32 $MINDI_TMP/target/$tbc/mboot.c32 2>> $LOGFILE
[3528]	1582	if [ $? -ne 0 ] ; then
[3522]	1583	LogAll "ERROR: Failed to copy $MBOOTC32 to $MINDI_TMP/target/$tbc"
	1584	retval=$(($retval+1))
	1585	fi
[747]	1586	fi
[3522]	1587	fi
[3499]	1588
[3522]	1589	MakeMessageFile $MINDI_TMP/target/$tbc \| cut -c1-80 > $MINDI_TMP/target/$tbc/message.txt
	1590
	1591	if [ _"$MONDO_SHARE" != _"" ]; then
	1592	cp -rf $MINDI_TMP/target/$tbc $MONDO_ROOT 2>> $LOGFILE
[3528]	1593	if [ $? -ne 0 ] ; then
[3522]	1594	LogAll "ERROR: Failed to copy $MINDI_TMP/target/$tbc to $MONDO_ROOT"
	1595	LogAll " Please check the target directory."
	1596	retval=$(($retval+1))
	1597	fi
	1598	if [ $KERNEL_IS_XEN = "yes" ]; then
	1599	cp -f $MINDI_TMP/target/xen.gz $MONDO_ROOT 2>> $LOGFILE
[3528]	1600	if [ $? -ne 0 ] ; then
[3522]	1601	LogAll "ERROR: Failed to copy $MINDI_TMP/target/xen.gz to $MONDO_ROOT"
	1602	LogAll " Please check the target directory."
	1603	retval=$(($retval+1))
[3476]	1604	fi
[747]	1605	fi
[3522]	1606	cp -f $MONDO_SHARE/autorun $MINDI_TMP/target 2>> $LOGFILE
[3527]	1607	cp -f $MINDI_TMP/target/vmlinuz $MONDO_ROOT 2>> $LOGFILE
[3528]	1608	if [ $? -ne 0 ] ; then
[3527]	1609	LogAll "ERROR: Failed to copy $MINDI_TMP/vmlinuz to $MONDO_ROOT"
	1610	LogAll " Please check the target directory."
	1611	retval=$(($retval+1))
	1612	fi
	1613	cp -f $MINDI_TMP/target/initrd.img $MONDO_ROOT 2>> $LOGFILE
[3528]	1614	if [ $? -ne 0 ] ; then
[3527]	1615	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MONDO_ROOT"
	1616	LogAll " Please check the target directory."
	1617	retval=$(($retval+1))
	1618	fi
[3522]	1619	fi
[747]	1620
[3522]	1621	if [ -f "$MINDI_TMP/$MRCFG" ]; then
	1622	cp -f $MINDI_TMP/$MRCFG $MINDI_TMP/target/tmp
	1623	fi
[747]	1624
[3522]	1625	LogFile "----------- target dir content -----------"
	1626	LogFile "------------------------------------------"
	1627	ls -lR $MINDI_TMP/target >> $LOGFILE
	1628	LogFile "------------------------------------------"
	1629	LogFile "----------- target dir sizes -------------"
	1630	du -sk $MINDI_TMP/target/* >> $LOGFILE
	1631	LogFile "------------------------------------------"
[3692]	1632	LogFile "Kernel size = `du -sk $kernelpath \| cut -f1` K"
	1633	LogFile "--------------------------------"
[3476]	1634
[3522]	1635	if [ "$retval" -ne "0" ] ; then
[3546]	1636	sync
[3522]	1637	umount $MINDI_TMP/target
	1638	LogAll "ERROR: Problems while creating boot media."
	1639	LogAll " Please unload some of your modules and try again."
[3692]	1640	Die " Try using another temporary directory instead of $MINDI_TMP"
[3522]	1641	fi
[3476]	1642
[3522]	1643	mkdir -p $MINDI_TMP/mpt
[1684]	1644
[3522]	1645	if [ "$target" = "USB" ]; then
	1646	LogAll "INFO: Transforming $USBDEVICE in a Bootable device"
	1647	LogAll "INFO: Checking $USBDEVICE"
[2924]	1648	$FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
[1684]	1649	if [ $? -ne 0 ]; then
[2963]	1650	LogAll "ERROR: Unable to access $USBDEVICE"
[3086]	1651	LogAll " Make sure your USB device is plugged in"
[2963]	1652	MindiExit -1
[1684]	1653	fi
[3149]	1654	# Some distro do auto mount at that point (Ubuntu)
[3522]	1655	LogAll "INFO: Unmounting $USBPART just in case"
[3546]	1656	sync
[1721]	1657	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[3419]	1658	if [ "$BOOT_TYPE" = "BIOS" ]; then
[3403]	1659	# If your key has no MBR it may cause an issue
	1660	# Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
	1661	if [ -r $MBRFILE ]; then
	1662	LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
[3522]	1663	dd if=$MBRFILE of=$USBDEVICE >> $LOGFILE 2>> $LOGFILE
[3403]	1664	else
	1665	LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
	1666	LogAll " on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
	1667	fi
[2855]	1668	fi
[3522]	1669	LogAll "INFO: Preparing $USBDEVICE"
[2851]	1670	cat > $MINDI_TMP/fdisk.txt << EOF
[2057]	1671	d
	1672	d
	1673	d
	1674	d
[1684]	1675	n
	1676	p
	1677	1
	1678
	1679
	1680	t
	1681	b
	1682	a
	1683	1
	1684	w
	1685	EOF
[2851]	1686	$FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
[1684]	1687	if [ $? -ne 0 ]; then
[2963]	1688	LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
[3086]	1689	LogAll " Make sure your USB device is plugged in"
[1684]	1690	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1691	MindiExit -1
	1692	fi
[2963]	1693	LogFile "fdisk build file"
	1694	LogFile "----------------"
[2851]	1695	cat $MINDI_TMP/fdisk.txt >> $LOGFILE
[2963]	1696	LogFile "----------------"
[2924]	1697	rm -f $MINDI_TMP/fdisk.txt
[3522]	1698	LogAll "INFO: The USB device $USBDEVICE now looks like this:"
[2190]	1699	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
[3006]	1700	# Calling kpartx in case devices were not created
[3033]	1701	if [ -x "/sbin/kpartx" ]; then
[3027]	1702	/sbin/kpartx -a $USBDEVICE
	1703	fi
[2461]	1704	# Some distro do auto mount at that point (Ubuntu)
[3522]	1705	LogAll "INFO: Unmounting $USBPART just in case again"
[3546]	1706	sync
[2461]	1707	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[3086]	1708	# Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
	1709	if [ "`which dmsetup`" != "" ]; then
[3368]	1710	block_id="`echo $USBPART \| sed 's/\/dev\///g'`"
	1711	if [[ "`dmsetup ls \| awk '{print $1}' \| grep $block_id`" != "" ]]; then
[3522]	1712	LogAll "INFO: Removing $block_id from device mapper."
[3368]	1713	sleep 1
	1714	dmsetup remove $block_id
	1715	fi
	1716	fi
[3522]	1717	part=$USBPART
	1718	mount_opt=""
	1719	else
	1720	# ISO image
	1721	part=$MINDI_TMP/mindi-bootroot.img
	1722	size=`du -sk $MINDI_TMP/target 2> /dev/null \| cut -f1`
	1723	# Adds 10 MB to allow for additional space
	1724	size=$(($size+10000))
	1725	LogAll "INFO: Creating a $size KB empty file for boot device of the ISO image"
	1726	dd if=/dev/zero of=$part bs=1k count=$size &> /dev/null \|\| Die "Cannot dd blank $part"
	1727	mount_opt="-o loop"
	1728	fi
	1729
	1730	LogAll "INFO: Creating a vfat filesystem on $part"
[3531]	1731
	1732	mkfs.vfat $part 2>&1 >> $LOGFILE
[3522]	1733	if [ $? -ne 0 ]; then
	1734	LogAll "ERROR: Unable to create a vfat filesystem on $part"
	1735	if [ "$target" = "USB" ]; then
	1736	LogAll " Make sure your USB device is plugged in and partitioned ($part must exist on it)"
[1684]	1737	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1738	fi
[3522]	1739	MindiExit -1
	1740	fi
[3532]	1741	if [ "$target" = "ISO" ]; then
	1742	if [ "$BOOT_TYPE" = "BIOS" ]; then
	1743	# syslinux should be run on a local file (doen't work through NFS Cf: #297)
	1744	# and run after the formating for versions > 6 it seems
	1745	syslinux $part >> $LOGFILE 2>> $LOGFILE
	1746	fi
	1747	fi
[3522]	1748	LogAll "INFO: Mounting $part on $MINDI_TMP/mpt"
	1749	mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
	1750	if [ $? -ne 0 ]; then
	1751	LogAll "ERROR: Unable to mount $part on $MINDI_TMP/mpt"
	1752	if [ "$target" = "USB" ]; then
	1753	LogAll " Make sure your USB device is plugged in, partitioned and formated ($part must exist on it)"
[1684]	1754	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1755	fi
[3522]	1756	MindiExit -1
	1757	fi
	1758
	1759	LogAll "INFO: Moving boot info on $MINDI_TMP/mpt"
	1760	mv $MINDI_TMP/target/* $MINDI_TMP/mpt
[3528]	1761	if [ $? -ne 0 ] ; then
[3522]	1762	LogFile "--------------------------------"
	1763	LogFile "INFO: Size of $MINDI_TMP/mpt:"
	1764	du -sk $MINDI_TMP/mpt/* >> $LOGFILE
	1765	LogFile "--------------------------------"
[3546]	1766	sync
[3522]	1767	umount $MINDI_TMP/mpt
	1768	LogAll "ERROR: Problems while creating boot media."
	1769	LogAll " Please unload some of your modules and try again."
[3692]	1770	Die " Try using another temporary directory instead of $MINDI_TMP"
[3522]	1771	fi
	1772
	1773	if [ "$target" = "ISO" ]; then
[3534]	1774	if [ "$ARCH" != "ia64" ]; then
	1775	ISO_OPT="$ISO_OPT -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
	1776	fi
[3522]	1777	# ISO
[3533]	1778	if [ "$ARCH" != "ia64" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
[3534]	1779	CMD="$ISO_CMD $ISO_OPT"
[3532]	1780	MakeISO
[3522]	1781	else
[3534]	1782	if [ "$ARCH" = "ia64" ]; then
	1783	CMD="$ISO_CMD $ISO_OPT -b images/mindi-bootroot.img -c images/boot.cat"
	1784	else
	1785	# UEFI
	1786	echo "$CMD" \| grep -q "xorriso"
	1787	if [ $? -eq 0 ]; then
[3598]	1788	XOV=`xorriso --version 2>&1 \| head -1 \| awk '{print $3}'`
	1789	XOVMAJ=`echo $XOV \| cut -d. -f1`
	1790	XOVMIN=`echo $XOV \| cut -d. -f2`
	1791	if [ $XOVMAJ -ge 1 && $XOVMIN -ge 3 ]; then
	1792	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -e images/mindi-bootroot.img -no-emul-boot"
	1793	else
	1794	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot --efi-boot images/mindi-bootroot.img"
	1795	fi
[3534]	1796	else
	1797	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
	1798	fi
	1799	fi
[3522]	1800	fi
	1801	fi
	1802
[3546]	1803	# Avoids graphical tool to keep the FS mounted
	1804	sync
[3522]	1805	umount $MINDI_TMP/mpt \|\| Die "Unable to unmount $MINDI_TMP/mpt"
	1806
	1807	if [ "$target" = "ISO" ]; then
[3532]	1808	cp $part $MINDI_CACHE
[3533]	1809	if [ "$ARCH" = "ia64" ] \|\| [ "$BOOT_TYPE" = "UEFI" ]; then
[3692]	1810	# Mount again !
	1811	LogAll "INFO: Re-Mounting $part on $MINDI_TMP/mpt"
	1812	mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
[3535]	1813	# We just need the EFI dir and the boot image for this case
[3536]	1814	mkdir -p $MINDI_TMP/mpt2 $MINDI_TMP/mpt/images $MINDI_TMP/mpt/archives
[3535]	1815	mount -o loop $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt2 2>> $LOGFILE
	1816	# We need again the kernel+initrd at the root for UEFI boot at least
	1817	cp -a $MINDI_TMP/mpt2/EFI $MINDI_TMP/mpt2/vmlinuz $MINDI_TMP/mpt2/initrd.img $MINDI_TMP/mpt
	1818	# We need the boot image now and what mindi needs at restore time as well
	1819	cp -a $MINDI_TMP/mpt2/images/all.tar.gz $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt/images
[3546]	1820	# Avoids graphical tool to keep the FS mounted
	1821	sync
[3535]	1822	umount $MINDI_TMP/mpt2
	1823	LogFile "----------- target dir content -----------"
	1824	LogFile "------------------------------------------"
	1825	ls -lR $MINDI_TMP/mpt >> $LOGFILE
	1826	LogFile "------------------------------------------"
[3532]	1827	MakeISO
[3522]	1828	fi
	1829	else
	1830	# USB
[1684]	1831	if [ "$ARCH" != "ia64" ] ; then
[2939]	1832	syslinux -v 2>&1 \| grep -q 4.02
	1833	if [ $? -eq 0 ]; then
	1834	# This buggy version of syslinux requires a call to --stupid and not -s
	1835	syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
	1836	res=$?
	1837	else
	1838	syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
	1839	res=$?
	1840	fi
	1841	if [ $res -ne 0 ] ; then
[2963]	1842	LogAll "----------- syslinux's errors --------------"
[1684]	1843	cat $MINDI_TMP/syslinux.log \|tee -a $LOGFILE
[2963]	1844	LogAll "------------------------------------------"
[3565]	1845	LogAll "ERROR: Failed to create USB image."
[1684]	1846	else
[2963]	1847	LogFile "INFO: Created bootable USB image on $USBDEVICE"
[1684]	1848	fi
	1849	rm -f $MINDI_TMP/syslinux.log
	1850	else
[2963]	1851	LogAll "ERROR: No USB boot support for ia64"
[1684]	1852	MindiExit -1
	1853	fi
[3522]	1854	fi
[1684]	1855	}
	1856
	1857
[3522]	1858	OfferToMakeBootableUSB() {
	1859
	1860	local i files
	1861
	1862	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
	1863	echo -en "\nShall I make a bootable USB device ? (y/[n]) "
	1864	read i
	1865	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1866	if [ "$USBDEVICE" = "" ]; then
	1867	echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
	1868	read dev
	1869	USBDEVICE=$dev
	1870	fi
	1871	echo "WARNING: This will erase all content on $USBDEVICE"
	1872	echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
	1873	read i
	1874	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1875	else
	1876	if [ "$PROMPT_MAKE_USB_IMAGE" = "no" ] && [ _"$MONDO_SHARE" = _"" ] && [ "$USBDEVICE" = "" ]; then
	1877	Die "No USBDEVICE environment variable declared, aborting"
	1878	fi
	1879	fi
	1880	USBPART="${USBDEVICE}1"
	1881
	1882	MakeBootableDevice USB
	1883	}
	1884
	1885
	1886	OfferToMakeBootableISO() {
	1887
	1888	local i files
	1889
	1890	if [ -z "$ISO_CMD" ]; then
	1891	LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
	1892	return
	1893	fi
	1894
	1895	if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
	1896	echo -en "\nShall I make a bootable CD image? (y/[n]) "
	1897	read i
	1898	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1899	fi
	1900
	1901	MakeBootableDevice ISO
	1902	}
	1903
	1904
[747]	1905	MakeMessageFile() {
[2292]	1906
	1907	if [ -x "/bin/lsb_release" ]; then
	1908	DESC=`/bin/lsb_release -d \| cut -d: -f2 \| sed "s/[ \t]*//"`
[3173]	1909	elif [ -r /etc/arch-release ]; then # this code must be written before /etc/issue test to avoid errors
	1910	DESC="Arch Linux"
	1911	if [ -r /var/log/pacman.log ]; then
	1912	# there are no releases but we can get the last system upgrade
	1913	# Output example: Arch Linux [2011-03-03 01:39]
	1914	DESC="$DESC $(tac /var/log/pacman.log \| grep -m1 'full system upgrade' \| cut -d']' -f1)]"
[2754]	1915	fi
[3426]	1916	elif [ -x "/etc/os-release" ]; then
	1917	DESC=`grep PRETTY_NAME /etc/os-release \| cut -d= -f2`
	1918	elif [ -x "/usr/bin/pbdistrocheck" ]; then
	1919	# For pb >= 0.9.8
	1920	DESC=`/usr/bin/pbdistrocheck -s \| cut -d, -f1-4 \| sed 's/,/-/g'`
[2732]	1921	elif [ -r /etc/issue.net ]; then
[2731]	1922	DESC=`head -1 /etc/issue.net`
[2732]	1923	elif [ -r /etc/issue ]; then
[2731]	1924	DESC=`head -1 /etc/issue`
[747]	1925	else
[2731]	1926	DESC="Unknown desc"
[747]	1927	fi
[2292]	1928	sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt \| sed "s/KKKKK/Kernel $KERVER/" \| sed "s/AAAAA/on a $ARCH architecture/" \| sed "s/TTTTT/`LC_TIME=C date`/" \| sed "s/MMMMM/`hostname`/" \| sed "s/DDDDD/$DESC/"
[1885]	1929	if [ _"$MONDO_SHARE" != _"" ]; then
	1930	if [ "$CDRECOVERY" != "yes" ] ; then
[3270]	1931	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3281]	1932	echo -en "Press <0eenter07> for 0cnetwork restore07\n"
[3278]	1933	echo -en "$BOOT_MEDIA_MESSAGE"
[1885]	1934	elif [ ! "$MINDI_TMP" ] ; then
[3522]	1935	echo -en "FYI, this is _not_ a MondoRescue CD.\n"
	1936	if [ -e "$MINDI_LIB/memtest.img" ] ; then
[3653]	1937	echo -en "Type 'memtest' <Enter> to test your machine's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
[3522]	1938	fi
[1885]	1939	else
	1940	echo -en "$BOOT_MEDIA_MESSAGE"
[747]	1941	fi
[1983]	1942	else
	1943	echo -en "\
[747]	1944	To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
	1945	CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
[1983]	1946	fi
[747]	1947	fi
[3173]	1948
	1949	# Also create the other help screens
	1950	head -24 $MINDI_CONF/README.bootparam \| cut -c1-80 > $1/boot1.txt
	1951	head -48 $MINDI_CONF/README.bootparam \| tail -24 \| cut -c1-80 > $1/boot2.txt
	1952	head -24 $MINDI_CONF/README.pxe \| cut -c1-80 > $1/pxe.txt
[747]	1953	}
	1954
	1955
[1983]	1956	MakeBootConfFile() {
[1885]	1957	local options i ooo
[747]	1958	options=""
[1983]	1959	# Type of boot file (elilo or syslinux/isolinux)
	1960	type=$1
[3588]	1961	if [ "$type" = "elilo" ] \|\| [ "$type" = "grub2" ]; then
[1983]	1962	sep="="
[3398]	1963	sepdef="="
[1983]	1964	else
	1965	sep=" "
[3398]	1966	sepdef=" "
[1983]	1967	fi
[925]	1968
[1983]	1969	# Generic header for conf file
[3398]	1970	if [ "$type" = "elilo" ]; then
	1971	echo -en "prompt\n"
	1972	elif [ "$type" = "grub" ]; then
	1973	echo -en "pause Press a key when ready to restore\n"
[3518]	1974	elif [ "$type" = "grub2" ]; then
	1975	echo -en "set "
[3398]	1976	else
[3535]	1977	# syslinux family
[3173]	1978	echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
[925]	1979	fi
[1983]	1980
	1981	# Compute which default option to boot from
[3398]	1982	echo -en "default${sepdef}"
[747]	1983	if [ "$CDRECOVERY" = "yes" ] ; then
[3398]	1984	if [ "$type" = "grub" ]; then
[3430]	1985	# TODO: Which num ???
[3398]	1986	echo -en "0\n"
	1987	else
	1988	echo -en "RESTORE\n"
	1989	fi
[1983]	1990	# In case it's mondoarchive
[1885]	1991	elif [ _"$MONDO_SHARE" != _"" ]; then
[3270]	1992	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3398]	1993	if [ "$type" = "grub" ]; then
	1994	echo -en "3\n"
	1995	else
	1996	echo -en "iso\n"
	1997	fi
[747]	1998	else
[3398]	1999	if [ "$type" = "grub" ]; then
	2000	echo -en "1\n"
	2001	else
	2002	echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
	2003	fi
[747]	2004	fi
	2005	else
[3398]	2006	if [ "$type" = "grub" ]; then
	2007	echo -en "0\n"
	2008	else
	2009	echo -en "expert\n"
	2010	fi
[747]	2011	fi
	2012
[1983]	2013	# Handle timeout
[3588]	2014	if [ "$type" = "grub2" ]; then
	2015	seppref="set "
	2016	else
	2017	seppref=""
[3518]	2018	fi
[3587]	2019	if [ "$CDRECOVERY" = "yes" ] ; then
[3588]	2020	echo -en "${seppref}timeout${sep}10000\n"
[3587]	2021	else
[3588]	2022	echo -en "${seppref}timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
[747]	2023	fi
	2024	echo -en "\n"
[1983]	2025
[2124]	2026	# prepare which labels will be generated
[747]	2027	if [ "$CDRECOVERY" = "yes" ] ; then
[925]	2028	options="RESTORE expert"
[1885]	2029	else
	2030	if [ _"$MONDO_SHARE" != _"" ]; then
[2344]	2031	options="interactive expert compare iso nuke isonuke"
[747]	2032	else
	2033	options="expert"
[925]	2034	fi
[747]	2035	fi
[1983]	2036
	2037	# Generate rest of conf file
[747]	2038	for i in $options ; do
[925]	2039	ooo=$i
[3111]	2040	[ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
[1983]	2041	if [ "$type" = "elilo" ]; then
[3692]	2042	outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=RAMDISK_SIZE $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
[3398]	2043	elif [ "$type" = "grub" ]; then
[3692]	2044	outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
[3518]	2045	elif [ "$type" = "grub2" ]; then
[3535]	2046	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2047	lorder="linuxefi"
	2048	iorder="initrdefi"
	2049	else
	2050	lorder="linux"
	2051	iorder="initrd"
	2052	fi
[3692]	2053	outstr="menuentry '$i' {\n\tinsmod all_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod part_gpt\n\tinsmod ext2\n\tinsmod xfs\n\techo 'Loading kernel...'\n\t$lorder /vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\techo 'Loading ramdisk...'\n\t$iorder /initrd.img\n}\n"
[925]	2054	else
[2073]	2055	ps="/"
[2629]	2056	if [ $KERNEL_IS_XEN = "no" ]; then
[3692]	2057	outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
[2629]	2058	else
[3692]	2059	outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
[2629]	2060	fi
[925]	2061	fi
[1885]	2062	echo -en "$outstr"
[747]	2063	done
[1983]	2064	if [ -e "$MINDI_LIB/memtest.img" ] ; then
	2065	if [ "$type" = "elilo" ]; then
	2066	echo -en "image=/memtest.bin\n\tlabel=memtest\n"
[2073]	2067	echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
[3398]	2068	elif [ "$type" = "grub" ]; then
[3415]	2069	echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
[3518]	2070	elif [ "$type" = "grub2" ]; then
	2071	echo -en "menuentry 'memtest' {\n\tload_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod xfs\n\tlinux /memtest\n\tinitrd /memtest.img\n}\n"
[1983]	2072	else
[2073]	2073	ps="/"
	2074	if [ "$type" = "syslinux" ]; then
	2075	ps=""
	2076	fi
	2077	echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
	2078	echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
[1983]	2079	fi
	2080	fi
[747]	2081	}
	2082
[2006]	2083	ParseModprobeForIncludes() {
	2084	local MODPROBE_CONF mpincfile includes include
	2085
	2086	MODPROBE_CONF=/etc/modprobe.conf
	2087	mpincfile=$1
	2088	touch $mpincfile
	2089	if [ -a $MODPROBE_CONF ]; then
[2431]	2090	includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF\|sort -u)
[2006]	2091	if [ -n "$includes" ]; then
	2092	for include in $includes
	2093	do
	2094	if [ -a "$include" ]; then
	2095	echo $include >> $mpincfile
	2096	fi
	2097	done
	2098	fi
	2099	fi
	2100	}
	2101
[3585]	2102	PrepareBootDir() {
[2006]	2103
[3692]	2104	local detect
	2105	# Needs a bigdir variable setup before calling it
[3585]	2106
	2107	# copy (e)lilo/isolinux/grub/whatever stuff into it as well
	2108	# to get it on the media (in addition to the boot part
	2109	# and also to support UEFI boot mechanism
	2110	if [ "$boottype" != "" ]; then
	2111	detect="no"
	2112	else
	2113	detect="yes"
	2114	boottype=syslinux
	2115	fi
	2116	bootdir=$bigdir/$boottype
	2117	bootconf="$bootdir/$boottype.cfg"
	2118	mkdir -p $bootdir
	2119	FindLdlinux32Binary
	2120
	2121	if [ "$BOOT_TYPE" != "BIOS" ]; then
	2122	if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
	2123	LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
	2124	MindiExit -1
	2125	fi
	2126
	2127	mountefi=0
	2128	# EFI or UEFI
	2129	# TODO: names are hard-coded for now
	2130	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2131	# UEFI
	2132	efidir=$bigdir/EFI/BOOT
	2133	# Auto-detection if needed
	2134	if [ $detect = "yes" ]; then
	2135
	2136	# mount /boot/efi if needed
	2137	df -T \| grep /boot/efi \| grep -qE 'vfat'
	2138	if [ $? -ne 0 ]; then
	2139	mount /boot/efi
	2140	if [ $? -ne 0 ]; then
	2141	echo "ERROR: You have to mount your (U)EFI partition when using mindi"
	2142	MindiExit -1
	2143	fi
	2144	mountefi=1
	2145	fi
	2146
	2147	# On RHEL6 grub works
	2148	dname=`pbdistrocheck \| grep -E '^Name:' \| cut -d':' -f2`
	2149	dver=`pbdistrocheck \| grep -E '^Ver:' \| cut -d':' -f2`
[3602]	2150	if [ $dname = "rhel" -o $dname = "centos" -o $dname = "oel" ] && [ $dver = "6" ]; then
[3585]	2151	boottype=grub
[3652]	2152	elif [ $dname = "rhel" -o $dname = "centos" -o $dname = "oel" ] && [ $dver -ge 7 ]; then
[3585]	2153	boottype=grub2
[3652]	2154	elif [ $dname = "fedora" ] && [ $dver -ge 20 ]; then
[3609]	2155	boottype=grub2
[3652]	2156	elif [ $dname = "debian" ] && [ $dver -ge 8 ]; then
[3585]	2157	boottype=grub2
	2158	else
	2159	# Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
	2160	boottype=syslinux
	2161	fi
	2162	fi
	2163	if [ "$boottype" = "syslinux" ]; then
	2164	if [ ! "$bootbin" ]; then
	2165	FindSyslinux64EFI
	2166	bootbin=$SYSLINUX64EFI
	2167	fi
	2168	bootconf="$efidir/syslinux.cfg"
	2169	elif [ "$boottype" = "grub" ]; then
	2170	if [ ! "$bootbin" ]; then
	2171	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
	2172	fi
	2173	bootconf="$efidir/BOOTX64.conf"
	2174	elif [ "$boottype" = "grub2" ]; then
	2175	if [ ! "$bootbin" ]; then
	2176	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
	2177	fi
	2178	bootconf="$efidir/grub.cfg"
	2179	fi
	2180
	2181	# Depending on the arch, the target boot file is different
	2182	if [ "$ARCH" = "x86_64" ] ; then
	2183	tgbin="BOOTX64.efi"
	2184	elif [ "$ARCH" = "armv8" ]; then
	2185	tgbin="BOOTAA64.efi"
	2186	else
	2187	# i?386
	2188	tgbin="BOOTIA32"
	2189	fi
	2190	else
	2191	# EFI
	2192	efidir=$bootdir
	2193	bootbin=`find /boot/efi -iname "elilo.efi" \| head -1`
	2194	tgbin=$bootbin
	2195	boottype=elilo
	2196	bootconf="$efidir/elilo.conf"
	2197	fi
	2198	LogAll "INFO: Found $boottype boot type"
	2199	mkdir -p $efidir
	2200	cp $bootbin $efidir/$tgbin
	2201
	2202	if [ $mountefi -eq 1 ]; then
	2203	umount /boot/efi 2>&1 > /dev/null
	2204	fi
	2205
	2206	if [ $boottype = "syslinux" ]; then
	2207	FindLdlinuxe64Binary
	2208	if [ -e "$LDLINUXE64" ]; then
	2209	LogFile "INFO: Copying $LDLINUXE64 to $efidir"
	2210	cp $LDLINUXE64 $efidir 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
	2211	cp $LDLINUXE64/../libutil.c32 $efidir 2>> $LOGFILE \|\| Die "Cannot copy libutil.c32 to $efidir). Did you run out of disk space?"
	2212	if [ -e $LDLINUXE64/../isolinux.c32 ]; then
	2213	cp $LDLINUXE64/../isolinux.c32 $efidir 2>> $LOGFILE \|\| Die "Cannot copy isolinux.c32 to $efidir). Did you run out of disk space?"
	2214	fi
	2215	fi
	2216	fi
	2217	# tgdir for syslinux
	2218	tgdir=$bigdir/EFI
	2219	else
	2220	# tgdir for syslinux
	2221	tgdir=$bootdir
	2222	fi
	2223	# In all cases prepare syslinux content for BIOS mode
	2224	# so that we can have multi boot mode media BIOS+UEFI
	2225	# Useful for syslinux 5.x
	2226	if [ -e "$LDLINUXC32" ]; then
	2227	LogFile "INFO: Copying $LDLINUXC32 to $tgdir"
	2228	cp $LDLINUXC32 "$tgdir" 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXC32 to $tgdir. Did you run out of disk space?"
	2229	fi
	2230	if [ -e $LDLINUXC32/../isolinux.c32 ]; then
	2231	LogFile "INFO: Copying isolinux.c32 to $tgdir"
	2232	cp $LDLINUXC32/../isolinux.c32 $tgdir 2>> $LOGFILE \|\| Die "Cannot copy isolinux.c32 to $tgdir). Did you run out of disk space?"
	2233	fi
	2234
	2235	MakeBootConfFile $boottype > $bootconf
	2236	LogFile "Boot Conf file $bootconf content is:"
	2237	LogFile "------------------------------------"
	2238	cat $bootconf >> $LOGFILE
	2239	LogFile "------------------------------------"
	2240	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2241	# Also generate the syslinux conf
	2242	MakeBootConfFile syslinux > "$bigdir/EFI/syslinux.cfg"
	2243	LogFile "Boot Conf file $bigdir/EFI/syslinux.cfg content is:"
	2244	LogFile "---------------------------------------------------"
	2245	cat $bigdir/EFI/syslinux.cfg >> $LOGFILE
	2246	LogFile "---------------------------------------------------"
	2247	fi
	2248
	2249	}
	2250
[3692]	2251	PrepareBigDirTar() {
[3585]	2252	echo -en "INFO: Tarring and zipping the data content..."
	2253	(cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log \| gzip -9 > $MINDI_CACHE/all.tar.gz \|\| LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
	2254	LogFile "Size of the data content"
	2255	LogFile "------------------------"
	2256	du -sk $MINDI_CACHE/*gz >> $LOGFILE
	2257	LogFile "------------------------"
	2258	echo -e "$DONE"
	2259
	2260	}
	2261
[3692]	2262	CleanBigDir() {
	2263	[ "$bigdir" != "/" ] && echo $bigdir \| grep -vq $MINDI_TMP && rm -rf $bigdir
	2264	}
[747]	2265
[3692]	2266	PrepareBigDir() {
	2267	local needlist diskdir res i j k lines lfiles includefile
	2268
[3407]	2269	rm -f $MINDI_CACHE/mindi.iso
[940]	2270	needlist=$MINDI_TMP/what-we-need.txt
[747]	2271	mkdir -p $bigdir/usr/bin
[1983]	2272	mkdir -p $bigdir/usr/sbin
[2006]	2273	includefile=$MINDI_TMP/$$.includefile.txt
[747]	2274
[3149]	2275	lfiles=`ls $DEPLIST_DIR/* \| grep -v /minimal`
[2409]	2276	if [ -e "$DEPLIST_FILE" ]; then
[3149]	2277	lfiles="$DEPLIST_FILE $lfiles"
[2409]	2278	fi
[1885]	2279	lines=`grep -vx " #." $lfiles \| grep -vx "" \| wc -l`
[2006]	2280	ParseModprobeForIncludes $includefile
[2019]	2281	lines=$(($lines+`cat $includefile \| wc -l`))
[2006]	2282	cat $lfiles $includefile \| GenerateGiantDependencyList $needlist $lines
[747]	2283	res=$?
[2006]	2284	rm -f $includefile
[3231]	2285	ListKernelModulePaths >> $needlist
[747]	2286	if [ "$res" -ne "0" ] ; then
[1902]	2287	Die "You have $res files present in dependency list\nbut absent from filesystem."
[747]	2288	fi
	2289	mkdir -p $bigdir/tmp
[1885]	2290	if [ _"$MONDO_SHARE" != _"" ]; then
[3430]	2291	# TODO: no reason to have the cfg file stored twice
[3278]	2292	MakeMondoConfigFile $MINDI_TMP/$MRCFG
	2293	cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
[747]	2294	fi
[3281]	2295
	2296	# Needs to be done after the MRCFG creation
	2297	FindAndAddUserKeyboardMappingFile
	2298
[3166]	2299	[ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
[747]	2300	DropOptimizedLibraries $needlist $bigdir
[3522]	2301	echo -en "INFO: Assembling dependency files"
[747]	2302
[3522]	2303	CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist` 1
[3585]	2304	rm -f $needlist
[3522]	2305	echo -e "$DONE"
[3149]	2306
[925]	2307	# also copy io.sys and msdos.sys, if we can find them
[747]	2308	for i in `mount \| cut -d' ' -f3` ; do
[925]	2309	for j in io.sys msdos.sys ; do
[963]	2310	[ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
[925]	2311	done
[747]	2312	done
	2313
[925]	2314	# master boot record, too
[940]	2315	i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
[3403]	2316	if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
[3149]	2317	LogAll "INFO: Backing up $i's MBR"
[925]	2318	dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
	2319	sleep 1
	2320	sync
	2321	j=$i
	2322	[ -h "$j" ] && j=`readlink -f $j`
[3149]	2323	LogAll "INFO: Creating /dev/boot_device ($j)"
[925]	2324	mkdir -p $bigdir/dev
[2089]	2325	cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE \|\| Die "Unable to create /dev/boot_device on ramdisk"
[747]	2326	fi
	2327
[1983]	2328	# Get terminfo content
	2329	ti="usr/share/terminfo/l"
	2330	if [ -d /$ti ]; then
[3522]	2331	mkdir -p $bigdir/$ti
	2332	cp -Rdf /$ti/* $bigdir/$ti 2>> $LOGFILE \|\| LogAll "ERROR: issue copying terminfo"
[747]	2333	fi
[1764]	2334	if [ -e "$MONDO_SHARE/restore-scripts" ]; then
[3543]	2335	cp -Rdf $MONDO_SHARE/restore-scripts/mondo/* $bigdir/usr/bin 2>> $LOGFILE
[3528]	2336	[ $? -ne 0 ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
[3543]	2337	cp -Rdf $MONDO_SHARE/restore-scripts/etc/* $bigdir/etc 2>> $LOGFILE
[747]	2338	fi
[2290]	2339	if [ -d "/lib/dev-state" ]; then
[3542]	2340	cp -a /lib/dev-state $bigdir/lib/ 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
[2290]	2341	fi
[940]	2342	MakeMountlist $MINDI_TMP/mountlist.txt
[2432]	2343	CheckMountlist $MINDI_TMP/mountlist.txt
[1902]	2344	mkdir -p $bigdir/tmp
[2092]	2345	cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE \|\| Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
[1885]	2346	if [ _"$MONDO_SHARE" != _"" ]; then
[1902]	2347	cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
[1885]	2348	fi
[2032]	2349	if [ $LVM != "false" ]; then
	2350	$MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
[3528]	2351	if [ $? -ne 0 ]; then
[2032]	2352	LVM="false"
	2353	rm -f $bigdir/tmp/i-want-my-lvm
[2552]	2354	else
[2963]	2355	LogFile "Your i-want-my-lvm file content is:"
	2356	LogFile "-----------------------------------"
[2552]	2357	cat $bigdir/tmp/i-want-my-lvm >> $LOGFILE
[2963]	2358	LogFile "-----------------------------------"
[2032]	2359	fi
	2360	fi
[3522]	2361	LogFile "INFO: Your mountlist.txt file content is:"
[2963]	2362	LogFile "-----------------------------------"
[1902]	2363	cat $bigdir/tmp/mountlist.txt >> $LOGFILE
[2963]	2364	LogFile "-----------------------------------"
[2432]	2365
[2092]	2366	echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
	2367	echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
[1902]	2368	if [ _"$MONDO_SHARE" != _"" ]; then
	2369	for q in filelist.full.gz biggielist.txt ; do
	2370	[ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
	2371	cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
	2372	done
	2373	fi
	2374
[3585]	2375	PrepareBootDir
[3692]	2376
[747]	2377	}
	2378
	2379
	2380	Prompt() {
	2381	echo -en "$1"
	2382	read line
	2383	}
	2384
	2385
	2386	ReadLine() {
	2387	local i incoming
	2388	read incoming
	2389	i=0
	2390	while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
[925]	2391	i=$(($i+1))
	2392	read incoming
[747]	2393	done
	2394	echo "$incoming"
	2395	}
	2396
	2397
	2398	SizeOfPartition() {
	2399	local devpath drive res stub
	2400	device=$1
[2917]	2401	if [ "`echo "$device" \| grep -E "^/dev/"`" = "" ] ; then
	2402	Die "Cannot find $device's size - is your /etc/fstab sane?"
	2403	fi
[747]	2404	if [ "`echo "$device" \| grep -F "/dev/md"`" != "" ] ; then
[925]	2405	res=`SizeOfRaidPartition $device`
	2406	[ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
	2407	echo "$res"
	2408	return 0
[747]	2409	fi
[925]	2410	# patch from Bill <bill@iwizard.biz> - 2003/08/25
[960]	2411	res=`$FDISK -s $device 2>> $LOGFILE`
[925]	2412	# end patch
[2448]	2413	# take only the first in case of multiple mount (cifs, nfs, ...)
	2414	[ "$res" = "" ] && res=`df -k -P -x supermount \| tr -s '\t' ' ' \| grep -F "$device " \| cut -d' ' -f2 \| head -1`
[747]	2415	[ "$res" = "" ] && res="-1"
	2416	echo $res
	2417	return 0
	2418	}
	2419
	2420
	2421	SizeOfRaidPartition() {
	2422	local real_dev smallest_size silly tmp
	2423
	2424	silly=999999999
	2425	smallest_size=$silly
	2426
	2427	for real_dev in `GetRaidDevMembers $1` ; do
[925]	2428	tmp=`SizeOfPartition $real_dev`
	2429	[ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
[747]	2430	done
	2431
	2432	if [ "$smallest_size" = "$silly" ] ; then
[925]	2433	echo "-1"
	2434	return 1
[747]	2435	else
[925]	2436	echo "$smallest_size"
	2437	return 0
[747]	2438	fi
	2439	}
	2440
	2441
	2442	StripExecutable()
	2443	{
	2444	local tmpfile
[925]	2445
[940]	2446	tmpfile=$MINDI_TMP/stripped.$$.dat
[747]	2447	[ -d "$1" ] \|\| [ -h "$1" ] && return
[963]	2448	cp -f $1 $tmpfile 2>> $LOGFILE
[747]	2449	strip $tmpfile 2> /dev/null
[3528]	2450	if [ $? -eq 0 ] ; then
[963]	2451	cp -f $tmpfile $1 2>> $LOGFILE
[2963]	2452	LogFile "INFO: Stripped binary $2"
[747]	2453	fi
	2454	rm -f $tmpfile
	2455	}
	2456
[2292]	2457	KernelVer() {
	2458	local fkern_ver fname
[747]	2459
[2292]	2460	fname=$1
	2461	file $fname \| grep -q gzip
[3528]	2462	if [ $? -eq 0 ] ; then
[2292]	2463	# Used by ia64
[3528]	2464	fkern_ver=`gzip -cd $fname \| strings 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
[2292]	2465	else
[3528]	2466	fkern_ver=`strings $fname 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
[2292]	2467	fi
	2468	echo "$fkern_ver"
	2469	}
	2470
	2471
[2880]	2472	# WARNING: This function should just echo the final result !!!
	2473	#
[747]	2474	TryToFindKernelPath() {
[2880]	2475	local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
[925]	2476
[2292]	2477	we_want_version=$KERVERRUN
[747]	2478	possible_kernels=""
	2479	duff_kernels=""
[2880]	2480	output=""
[3368]	2481
[747]	2482	if [ "$ARCH" = "ia64" ] ; then
	2483	root="/boot/efi/efi"
	2484	else
	2485	root="/"
	2486	fi
[2681]	2487	# See if we're booted from a Xen kernel
[2889]	2488	# From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
	2489	if [ -f /proc/xen/capabilities ]; then
[2681]	2490	# It's a Xen kernel
	2491	KERNEL_IS_XEN="yes"
[2963]	2492	LogFile "INFO: It's a Xen kernel..."
[2681]	2493	fi
	2494
[3122]	2495	for fname in `find $root -maxdepth 2 -type f \| grep -Ei 'lin\|kern\|xen' \| grep -Ev '^/proc/\|^/net/\|^/mnt\|^/lib\|^/lib64\|^/bin\|^/sbin\|^/usr\|^/tmp'` ; do
[925]	2496	[ ! -e "$fname" ] && continue
[747]	2497	[ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
[2292]	2498	fkern_ver=`KernelVer $fname`
[747]	2499	[ "$fkern_ver" = "" ] && continue
	2500	[ "`echo "$fkern_ver" \|grep -F "$we_want_version "`" = "" ] && continue
[925]	2501	[ -f "$fname" ] \|\| continue
	2502	[ -h "$fname" ] && continue
	2503	kdate=`uname -v \| $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' \| $AWK '{print $NF;}'`
	2504	file $fname \| grep -q gzip
[3528]	2505	if [ $? -eq 0 ] ; then
[925]	2506	# Used by ia64
	2507	if [ "`gzip -cd $fname \| strings 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[2880]	2508	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
[925]	2509	duff_kernels="$fname $duff_kernels"
	2510	else
[747]	2511	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2512	possible_kernels="$fname $possible_kernels"
[925]	2513	fi
[747]	2514	else
[925]	2515	if [ "`strings $fname 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[2880]	2516	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
[925]	2517	duff_kernels="$fname $duff_kernels"
	2518	else
[747]	2519	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2520	possible_kernels="$fname $possible_kernels"
[925]	2521	fi
[747]	2522	fi
	2523	done
	2524	if [ ! "$possible_kernels" ] && uname -a \| grep Knoppix > /dev/null ; then
[3535]	2525	possible_kernels=`find /boot/vmlinuz-[2-9].* \| tail -n1`
[747]	2526	fi
	2527	if [ ! "$possible_kernels" ] ; then
[3149]	2528	LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
[747]	2529	possible_kernels="$duff_kernels"
	2530	if [ ! "$possible_kernels" ] ; then
[3149]	2531	LogAll "INFO: Sorry, no duff kernels either"
[747]	2532	else
[3149]	2533	LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
	2534	LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
[747]	2535	fi
	2536	fi
[2681]	2537	if [ $KERNEL_IS_XEN = "yes" ]; then
	2538	possible_xenkernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -i "xen" \| sort -u \| tr '\n' ' '`
	2539	noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
	2540	fi
[2829]	2541	possible_kernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -vi "xen" \| sort -u \| tr '\n' ' '`
	2542	noof_kernels=`CountItemsIn "$possible_kernels"`
[747]	2543	if [ "$noof_kernels" -eq "0" ] ; then
[3149]	2544	LogAll "Could not find your kernel."
[925]	2545	if [ -e "/boot/vmlinuz" ] ; then
[3149]	2546	LogAll "INFO: Using /boot/vmlinuz as a last resort."
[925]	2547	output=/boot/vmlinuz
[747]	2548	else
[925]	2549	output=""
	2550	fi
[747]	2551	elif [ "$noof_kernels" -eq "1" ] ; then
[2880]	2552	kp=`echo "$possible_kernels" \| sed s/' '//`
[2963]	2553	LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
[2880]	2554	output="$kp"
[747]	2555	else
	2556	for i in $possible_kernels ; do
[2880]	2557	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
[3149]	2558	LogAll "INFO: OK, I used my initiative and found that "
	2559	LogAll "INFO: $i is probably your kernel. "
[925]	2560	output="$i"
[2858]	2561	break
[925]	2562	fi
[747]	2563	done
[2858]	2564	if [ ! -n "$output" ]; then
[2880]	2565	if [ "`echo " $possible_kernels " \| grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
[2681]	2566	output=/boot/vmlinuz
[2963]	2567	LogFile "INFO: Schlomo, this one's for you."
[2681]	2568	else
[3651]	2569	LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
[2963]	2570	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
[3651]	2571	LogFile "INFO: $possible_kernels"
	2572	output=""
[2681]	2573	fi
	2574	fi
	2575	fi
	2576	if [ $KERNEL_IS_XEN = "yes" ]; then
	2577	if [ "$noof_xenkernels" -eq "0" ]; then
	2578	xenkernelpath=""
	2579	elif [ "$noof_xenkernels" -eq "1" ]; then
	2580	xenkernelpath=`echo "$possible_xenkernels" \| sed s/' '//`
[2963]	2581	LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
[925]	2582	else
[2681]	2583	for i in $possible_xenkernels ; do
[2880]	2584	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
[2963]	2585	LogFile "INFO: OK, I used my initiative and found that "
	2586	LogFile "INFO: $i is probably your Xen kernel. "
[2681]	2587	xenkernelpath="$i"
[2858]	2588	break
[2681]	2589	fi
	2590	done
[2858]	2591	if [ ! -n "$xenkernelpath" ]; then
[2681]	2592	new_possible_xenkernels=`echo "$possible_xenkernels" \| tr -s ' ' '\n' \| grep -E "^/boot" \| sort -u \| tr '\n' ' '`
	2593	if [ ! -n "$new_possible_xenkernels" ]; then
	2594	xenkernelpath=`echo $new_possible_xenkernels \| tr -s ' ' '\n' \| head -1`
[2963]	2595	LogFile "INFO: Using $xenkernelpath"
[2681]	2596	else
[2963]	2597	LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
	2598	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
	2599	LogFile "INFO: $possible_xenkernels"
[2880]	2600	output=""
[2681]	2601	xenkernelpath=`echo $possible_xenkernels \| tr -s ' ' '\n' \| head -1`
[2963]	2602	LogFile "INFO: Using $xenkernelpath"
[2681]	2603	fi
	2604	fi
[925]	2605	fi
[2681]	2606	if [[ -z "$xenkernelpath" \|\| ! -f "$xenkernelpath" ]]; then
	2607	Die "Cannot find Xen kernel $xenkernelpath, aborting"
	2608	fi
[747]	2609	fi
[3357]	2610	#LogAll "TryToFindKernelPath found $output"
[2681]	2611	echo "$output"
[747]	2612	}
	2613
[3660]	2614	CopyFromConf() {
[747]	2615
[3660]	2616	conf=$1
[3692]	2617	mp=$2
[3660]	2618	echo -en "INFO: Gathering dependencies of $conf.conf..."
[3692]	2619	LogFile "INFO: Gathering dependencies of $conf.conf..."
[3660]	2620	lis2=`grep -Ev '^#' $DEPLIST_DIR/$conf.conf \| sort -u`
	2621	noof_lines=`echo $lis2 \| wc -w`
	2622	progress=0
	2623	# Get only the files which exist in that list
	2624	# and potentially their symlink structure
[3661]	2625	# put apart directories for later handling
[3660]	2626	for f in $lis2; do
	2627	if [ -d $f ]; then
[3661]	2628	for g in `find $f`; do
[3660]	2629	echo $g >> $MINDI_TMP/$conf.lis
	2630	LocateDeps $g >> $MINDI_TMP/$conf.lis2
	2631	done
	2632	lis3="$lis3 $f"
[3661]	2633	else
[3660]	2634	if [ -r $f ]; then
	2635	echo $f >> $MINDI_TMP/$conf.lis
	2636	LocateDeps $f >> $MINDI_TMP/$conf.lis2
	2637	fi
	2638	fi
	2639	progress=$(($progress+1))
	2640	LogProgress $progress $noof_lines
	2641	done
	2642	echo -e "$DONE"
[3692]	2643	LogAll "INFO: Processing all dependencies links for $conf.conf..."
[3662]	2644	# And their deps except dirs
	2645	lines=`sort -u $MINDI_TMP/$conf.lis $MINDI_TMP/$conf.lis2`
	2646	rm -f $MINDI_TMP/$conf.lis2
[3660]	2647	finallist=""
[3662]	2648	# Remove directories from the list, as cp will create them anyway
[3660]	2649	# and it may hurt if /lib is in it as on Debian/Ubuntu
	2650	# recent bash says that -d is true for a link to a dir !
[3662]	2651	for f in $lines; do
[3660]	2652	if [ -e "$f" -a ! -d "$f" ] \|\| [ -h "$f" ]; then
	2653	# Do not overwrite files already in destination (avoid using option -n of cp not portable)
[3692]	2654	if [ ! -e "$mp/$f" ]; then
[3660]	2655	finallist="$finallist $f"
	2656	fi
	2657	fi
	2658	done
	2659	# But adds the directory useful in $lis3
[3692]	2660	fnllist=`echo $finallist $lis3 \| tr ' ' '\n' \| sort -u \| tr '\n' ' '`
	2661	LogFile "INFO: Copying $conf related files with cp -a --parents $fnllist -t $mp/"
	2662	cp -a --parents $fnllist -t $mp/ 2> $templog \|\| LogAll "WARNING: Problem in $conf analysis" $templog
[3662]	2663	rm -f $MINDI_TMP/$conf.lis
[3660]	2664	}
	2665
[3692]	2666	PrepareTargetDir() {
	2667	local tgz_dir_fname nodes kernelsize res currsize not_copied j k s w needed_modules_path d thelink templog
[925]	2668
[3692]	2669	tgz_dir_fname=$MINDI_LIB/rootfs
	2670	rdz_fname=$MINDI_TMP/initrd.img
	2671	kernelsize=`du -sk $kernelpath \| cut -f1`
[3403]	2672	res=0
	2673	templog=$MINDI_TMP/$$.log
	2674	> $templog
	2675
[3692]	2676	mkdir -p $targetdir
[3248]	2677	# Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
	2678	for d in bin sbin lib lib64; do
	2679	if [ -h "/$d" ]; then
	2680	thelink=`readlink /$d`
[3692]	2681	mkdir -p $targetdir/$thelink \|\| LogAll "ERROR: Unable to create $thelink in $targetdir"
	2682	mv $targetdir/$d/* $targetdir/$d/.??* $targetdir/$thelink 2> /dev/null
	2683	if [ -d "$targetdir/$d" -a ! -h "$targetdir/$d" ]; then
	2684	rmdir $targetdir/$d
[3248]	2685	fi
[3692]	2686	if [ ! -h $targetdir/$d ]; then
	2687	rm -f $targetdir/$d 2> /dev/null
	2688	(cd $targetdir ; ln -s $thelink $d) \|\| LogAll "ERROR: /$d is a symbolic link, but I couldn't create it in $targetdir"
[3248]	2689	fi
	2690	fi
	2691	done
[3357]	2692
[3692]	2693	LogFile "INFO: what is now in $targetdir"
	2694	ls -al $targetdir >> $LOGFILE
[3172]	2695
[2963]	2696	# Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
[3692]	2697	# copy from rootfs into targetdir
	2698	LogAll "INFO: Copying Mindi files onto $targetdir"
[3661]	2699	for f in $tgz_dir_fname/*; do
[2963]	2700	if [ ! -r $f ]; then
	2701	Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
	2702	else
[3692]	2703	cp -af $f $targetdir 2>&1 >> $LOGFILE
[2963]	2704	fi
	2705	done
[3692]	2706	(cd $targetdir/etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
	2707	# kernel expects linuxrc in ext2 filesystem
	2708	(cd $targetdir ; ln -sf usr/sbin/init linuxrc)
	2709	# kernel expects init in cpio filesystem
	2710	(cd $targetdir ; ln -sf usr/sbin/init init)
[1914]	2711
[3692]	2712	(cd $targetdir/dev ; tar -zxf dev-entries.tgz \|\| Die "Cannot untar dev-entries.tgz" ; rm -f dev-entries.tgz)
[747]	2713
	2714	for w in insmod.static insmod.static.old ; do
[925]	2715	s=`which $w 2> /dev/null`
	2716	if [ -e "$s" ] ; then
[3692]	2717	tar cf - -C / $s 2> /dev/null \| (cd $targetdir ; tar xf -)
[925]	2718	fi
[747]	2719	done
	2720
	2721	[ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
[2951]	2722
[2438]	2723	# Copy of files mandatory for ssh to automate mount if sshfs is used
[3692]	2724	mkdir -p $targetdir/.ssh $targetdir/tmp
	2725	cp -a ~root/.ssh/* $targetdir/.ssh 2> /dev/null
	2726	cat > $targetdir/tmp/myssh << EOF
	2727	ssh -o StrictHostKeyChecking=no \$*
[2438]	2728	EOF
[3692]	2729	chmod 755 $targetdir/tmp/myssh
[2438]	2730
[2039]	2731	# Copy of files mandatory for ld.so
[3692]	2732	cp -a /etc/ld.so.c* $targetdir/etc
[2039]	2733
[2951]	2734	# Handle the case where busybox and mount are dynamically linked
[3231]	2735	file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 \| grep -q "dynamically"
[2951]	2736	if [ $? -eq 0 ]; then
	2737	# We want to use the real mount and all the supported variants (nfs, cifs, ...)
[3692]	2738	rm -f $targetdir/bin/mount
[2951]	2739	fi
	2740
[3522]	2741	# Copy of files from the minimal env needed as per the deplist.d/minimal.conf (which includes all busybox deps)
[3692]	2742	CopyFromConf minimal $targetdir
[3357]	2743
	2744	# For older distributions expecting /sbin/init provides it
[3692]	2745	if [ ! -e "$targetdir/sbin/init" ]; then
	2746	(cd $targetdir/sbin ; ln -sf ../usr/sbin/init .)
[3357]	2747	fi
	2748
[3000]	2749	# To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
[3692]	2750	(cd $targetdir ; ln -sf /bin/bash bin/sh)
[3405]	2751	LogFile "INFO: Using bash as default shell"
[2951]	2752
	2753	# Avoids an issue on some distro (RHEL5)
[3692]	2754	rm -f $targetdir/etc/ld.so.conf.d/kernelcap*
[2164]	2755
[3661]	2756	# Management of DRBD
	2757	which drbdadm &> /dev/null
	2758	if [ $? -eq 0 ]; then
	2759	# Do we find DRBD devices setup
	2760	drbdadm sh-dev all \| grep -E '^/dev' &> /dev/null
	2761	if [ $? -eq 0 ]; then
[3692]	2762	CopyFromConf drbd $targetdir
[3661]	2763	fi
	2764	# DRBD requires net activation
	2765	MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS drbd"
	2766	fi
	2767
[1724]	2768	# Management of udev (which includes modprobe in rules)
[1759]	2769	ps auxww \| grep -v grep \| grep -qw udevd
[1716]	2770	if [ $? -eq 0 ]; then
[3692]	2771	echo "udev device manager found" > $targetdir/tmp/USE-UDEV
[3405]	2772	LogFile "INFO: udev device manager found"
[3692]	2773	tar cf - -C / /etc/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /etc/udev analysis" $templog
[3204]	2774	# This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
[3692]	2775	rm -f $targetdir/etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
[2894]	2776	# Do not do it if it's a link (Ubuntu 64 bits #503)
[3197]	2777	if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
[3692]	2778	tar cf - -C / /lib64/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /lib64/udev analysis" $templog
[2894]	2779	fi
[2895]	2780	if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [ ! -h "/lib32/udev" ]; then
[3692]	2781	tar cf - -C / /lib32/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /lib32/udev analysis" $templog
[2895]	2782	fi
	2783	if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [ ! -h "/lib/udev" ]; then
[3692]	2784	tar cf - -C / /lib/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /lib/udev analysis" $templog
[2895]	2785	fi
[3261]	2786	if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [ ! -h "/usr/lib/udev" ]; then
[3692]	2787	tar cf - -C / /usr/lib/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /usr/lib/udev analysis" $templog
[3261]	2788	fi
[3489]	2789	if [ -x /sbin/udevd ] \|\| [ -x /usr/bin/udevd ] \|\| [ -x /usr/lib/systemd/systemd-udevd ] \|\| [ -x /lib/systemd/systemd-udevd ]; then
[3692]	2790	CopyFromConf udev $targetdir
[1720]	2791	else
[2965]	2792	LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
[2963]	2793	LogAll " mindi will use static devices which may cause problems"
[3692]	2794	rm -f $targetdir/tmp/USE-UDEV
[1720]	2795	fi
[1716]	2796	fi
[1786]	2797
[2882]	2798	# Management of potential HW info (ProLiant only at the moment)
[1880]	2799	rm -rf $MINDI_CACHE/bkphw
	2800	mindi-bkphw $MINDI_CACHE $MINDI_CONF \| tee -a $LOGFILE
	2801	if [ -d $MINDI_CACHE/bkphw ]; then
[3565]	2802	LogAll "INFO: Hardware Information found and saved ..."
[3692]	2803	cp -rp $MINDI_CACHE/bkphw $targetdir
[1880]	2804	if [ -f $MINDI_CACHE/tools.files ]; then
	2805	lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
[1863]	2806	LocateDeps $lis > $MINDI_TMP/tools.lis
[3692]	2807	tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in tools.lis analysis" $templog
[1863]	2808	fi
[1880]	2809	if [ -f $MINDI_CACHE/mindi-rsthw ]; then
[3692]	2810	mv -f $MINDI_CACHE/mindi-rsthw $targetdir
	2811	chmod 755 $targetdir/mindi-rsthw
[1761]	2812	fi
[1880]	2813	rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
[1761]	2814	fi
	2815
[2183]	2816	# Management of perl scripts delivered needed at restore time
[3522]	2817	LogAll "INFO: Analyzing perl modules dependencies..."
[3565]	2818	mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]bin/mr- 2> $templog > $MINDI_TMP/perl.lis \|\| LogAll "ERROR: Problem in mindi-get-perl-modules" $templog
[3405]	2819	LogFile "DBG4: Perl Modules found:"
	2820	LogFile "-------------------------"
[3403]	2821	cat $MINDI_TMP/perl.lis >> $LOGFILE
[3405]	2822	LogFile "-------------------------"
[3692]	2823	tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in perl scripts analysis" $templog
[2183]	2824
[3692]	2825	tar cf - -C / /dev/fd0[1,2][4,7,8] 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in fd dev analysis" $templog
[1721]	2826
[1885]	2827	needed_modules=""
[3697]	2828	list_of_mods="$CDROM_MODS $FORCE_MODS"
[1885]	2829
[3270]	2830	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[747]	2831	# For PXE boot
[3697]	2832	list_of_mods="$list_of_mods $NET_MODS"
[747]	2833	fi
[1727]	2834	for i in $DENY_MODS; do
[2963]	2835	LogFile "INFO: Removing $i from the list of modules to load"
[3697]	2836	list_of_mods=`echo ${list_of_mods} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
[1727]	2837	done
	2838
[3253]	2839	if [ "${kernelname}" != "" ]; then
	2840	needed_modules_path=lib/modules/${kernelname}
[3257]	2841	mkgmopt="-k ${kernelname}"
[3253]	2842	else
	2843	needed_modules_path=lib/modules/$KERVERRUN
	2844	mkgmopt="-k $KERVERRUN"
	2845	fi
[1914]	2846
[3565]	2847	[ -e "/$needed_modules_path" ] \|\| LogAll "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then mindi won't probably work."
[3522]	2848	LogAll "INFO: Analyzing kernel modules dependencies..."
[3697]	2849	needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_mods`
[3253]	2850
[3257]	2851	LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
[3692]	2852	cp --parents -aL $needed_modules $targetdir/ 2> $templog \|\| LogAll "ERROR: Unable to copy modules to $targetdir" $templog
[3253]	2853
	2854	# Uncompress modules if not using udev and native modprobe
[3692]	2855	if [ ! -f $targetdir/tmp/USE-UDEV ]; then
[3253]	2856	for i in $needed_modules; do
	2857	if [ "`echo "$i" \| grep -E ".gz$"`" ]; then
[3692]	2858	gunzip -f $targetdir/$i
[1815]	2859	fi
[3253]	2860	if [ "`echo "$i" \| grep -E ".bz$"`" ]; then
[3692]	2861	bunzip2 -f $targetdir/$i
[3253]	2862	fi
	2863	if [ "`echo "$i" \| grep -E ".xz$"`" ]; then
[3692]	2864	unxz -f $targetdir/$i
[3253]	2865	fi
	2866	LogFile "INFO: Uncompressing $i"
	2867	done
	2868	fi
[1815]	2869
[2964]	2870	# Also copy modules.* in case of udev so that normal modprobe works
[3692]	2871	tar cf - -C / /$needed_modules_path/modules.* 2> $templog \| (cd "$targetdir" ; tar xf -) \|\| LogAll "ERROR: Unable to copy modules.* to $targetdir" $templog
[1815]	2872
[2680]	2873	# Copy FW in case some drivers needs it
[3163]	2874	for d in "/lib" "/usr/lib"; do
[3201]	2875	if [ -d "$d/firmware" -a ! -h $d ]; then
[3692]	2876	cp -a "$d/firmware" "$targetdir$d"
[3163]	2877	fi
	2878	done
[2680]	2879
[3163]	2880	# Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
	2881	for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
[3201]	2882	if [ -d "$d/multipath" -a ! -h $d ]; then
[3692]	2883	cp -a "$d/multipath" "$targetdir$d"
[3163]	2884	fi
	2885	done
	2886
[3326]	2887	# Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
[3692]	2888	(cd $targetdir/usr/bin ; for i in `ls`; do if [ ! -e "$targetdir/bin/$i" ]; then (cd $targetdir/bin ; ln -sf ../usr/bin/$i .); fi; done)
[3324]	2889
[2913]	2890	# Copy an additional ProLiant tool for OBDR support
	2891	if [ -f $MINDI_TMP/OBDR ]; then
[3117]	2892	found=0
[2913]	2893	if [ -x /usr/bin/hpsa_obdr_mode ]; then
[3692]	2894	mkdir -p $targetdir/usr/bin
	2895	cp -a /usr/bin/hpsa_obdr_mode $targetdir/usr/bin
[3565]	2896	LogAll "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
[3117]	2897	found=1
	2898	fi
	2899	if [ -x /usr/bin/sg_wr_mode ]; then
[3692]	2900	mkdir -p $targetdir/usr/bin
[3135]	2901	lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
[3118]	2902	LocateDeps $lis > $MINDI_TMP/obdr.lis
[3692]	2903	tar cf - $lis -C / `sort -u $MINDI_TMP/obdr.lis` 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in obdr.lis analysis" $templog
[3565]	2904	LogAll "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
[3117]	2905	found=1
	2906	fi
	2907	if [ $found -eq 0 ]; then
	2908	LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
[2913]	2909	LogAll " This may lead to a tape not going back to sequential mode after OBDR boot"
	2910	fi
	2911	fi
	2912
[3499]	2913	if [ ! -e "/sbin/devfsd" ]; then
[2963]	2914	LogFile "INFO: Deleting devfsd daemon from ramdisk"
[2995]	2915	[ ! -e "/sbin/devfsd" ] && LogFile " ...because /sbin/devfsd not found"
[3692]	2916	rm -f $targetdir/sbin/devfsd
[747]	2917	fi
[3692]	2918	[ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $targetdir/tmp/TAPEDEV-LIVES-HERE
[1885]	2919	if [ _"$MONDO_SHARE" != _"" ]; then
[3692]	2920	MakeMondoConfigFile $targetdir/tmp/$MRCFG
	2921	cp -f $targetdir/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE \|\| Die "Cannot copy $MRCFG to ramdisk"
	2922	cp -f $MINDI_TMP/mountlist.txt $targetdir/tmp/ 2>> $LOGFILE \|\| Die "Cannot copy mountlist to ramdisk"
	2923	echo -en "$FILES_IN_FILELIST" > $targetdir/tmp/FILES-IN-FILELIST
	2924	echo -en "$LAST_FILELIST_NUMBER" > $targetdir/tmp/LAST-FILELIST-NUMBER
[747]	2925	fi
[3310]	2926
	2927	# Create module list to load at restore time
[3692]	2928	rm -f $targetdir/tmp/modules
[3310]	2929	for m in $CDROM_MODS; do
[3692]	2930	echo $m >> $targetdir/tmp/modules
[3310]	2931	done
	2932
[3692]	2933	mkdir -p $targetdir/proc
[2963]	2934	LogFile "---------------------------"
[3692]	2935	LogFile "Content of initial targetdir:"
	2936	LogFile "---------------------------- "
	2937	(cd "$targetdir" ; ls -Rla ) >> $LOGFILE
[3372]	2938	LogFile "---------------------------"
[3692]	2939	}
[2438]	2940
[3692]	2941	CleanTargetDir() {
	2942	[ "$targetdir" != "/" ] && rm -rf $targetdir
	2943	}
	2944
	2945	PatchBootFiles() {
	2946
	2947	# Patch the real value of RAMDISK_SIZE now we have it
	2948	if [ -d "$bigdir/syslinux" ]; then
	2949	find $bigdir/syslinux -type f 1> $MINDI_TMP/bootf.lis 2> /dev/null
	2950	fi
	2951	if [ -d "$bigdir/EFI" ]; then
	2952	find $bigdir/EFI -type f 1>> $MINDI_TMP/bootf.lis 2> /dev/null
	2953	fi
	2954	for i in `cat $MINDI_TMP/bootf.lis`; do
	2955	perl -pi -e "s/RAMDISK_SIZE/$ramdisk_size/" $i
	2956	done
	2957	rm -f $MINDI_TMP/bootf.lis
	2958
	2959	}
	2960
	2961	MakeBootInitFile() {
	2962
	2963	local mountpoint tempfile res
	2964	tempfile=$MINDI_TMP/temp.rd
	2965	res=0
	2966
	2967	LogAll "INFO: Making Boot RAM Disk ($ramdisk_size KB)"
	2968	dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null \|\| Die "Not enough room for temporary ramdisk (MakeBootInitFile)"
	2969
	2970	LogAll "INFO: Creating ext2 filesystem on $tempfile"
	2971	mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE \|\| Die "Unable to create an ext2 file system on $tempfile"
	2972	res=$(($res+$?))
	2973
	2974	mountpoint=$MINDI_TMP/mountpoint.$$
	2975	mkdir -p $mountpoint
	2976	mount -t ext2 -o loop $tempfile $mountpoint \|\| Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
	2977	[ "$targetdir" = "/" ] && echo $targetdir \| grep -qv $MINDI_TMP && Die "Wrong targetdir $targetdir"
	2978	mv $targetdir/* $targetdir/.??* $mountpoint \|\| Die "Unable to move files from $targetdir to $mountpoint! Please increase EXTRA_SPACE"
	2979	res=$(($res+$?))
	2980	rmdir $targetdir
	2981
	2982	LogFile "INFO: initrd image is $rdz_fname"
[1230]	2983	# Determine what filesystem to use for initrd image
[2963]	2984	LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
[1230]	2985	gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
	2986	[ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
[3008]	2987	if [ "$gvFileSystem" = "ext2fs" ] \|\| [ "$gvFileSystem" = "ext3fs" ] \|\| [ "$gvFileSystem" = "ext4fs" ]; then
[1230]	2988	# say what will be used
[2963]	2989	LogFile "INFO: Creating an $gvFileSystem initrd image..."
[1230]	2990	# unmount loop filesystem and create image file using the standard approach
[3546]	2991	sync
[1230]	2992	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
[3522]	2993	dd if=$tempfile bs=1k of=${rdz_fname}.tmp > /dev/null 2> /dev/null
[3692]	2994	res=$(($res+$?))
[3008]	2995	if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
	2996	bs=`/sbin/tune4fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
	2997	else
	2998	bs=`tune2fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
	2999	fi
[2564]	3000	MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
[1799]	3001	gzip -c9 ${rdz_fname}.tmp > $rdz_fname
[3692]	3002	res=$(($res+$?))
[1764]	3003	rm -f ${rdz_fname}.tmp
[2390]	3004	elif [ "$gvFileSystem" = "initramfs" ]; then
[1230]	3005	# say what will be used
[2963]	3006	LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
[1230]	3007	# make sure that cpio is there
	3008	which cpio &> /dev/null; [ $? -eq 0 ] \|\| Die "cpio not found. Please install package cpio and try again."
	3009	# create cpio image file and unmount loop filesystem
[3524]	3010	(cd "$mountpoint" ; find . -print \| cpio -o -H newc 2> /dev/null \| gzip -9 > $rdz_fname)
[3692]	3011	res=$(($res+$?))
[3546]	3012	sync
[1230]	3013	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
[2390]	3014	else
[1230]	3015	Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
[2390]	3016	fi
	3017
[3692]	3018	# log that we are done
[747]	3019	if [ "$res" -eq "0" ] ; then
[3525]	3020	LogAll "INFO: MakeBootInitFile finished without error."
[747]	3021	else
[3525]	3022	LogAll "WARNING: MakeBootInitFile exits WITH ERRORS."
[747]	3023	fi
[3692]	3024
[747]	3025	return 0
	3026	}
	3027
	3028
	3029	##############################################################################
[1021]	3030	#----------------------------------- Main -----------------------------------#
[747]	3031	##############################################################################
	3032
[1885]	3033	# Now we can create what we need
	3034	mkdir -p $MINDI_TMP
[3692]	3035	export bigdir=$MINDI_TMP/bigdir.$$
	3036	export targetdir=$MINDI_TMP/targetdir.$$
[747]	3037
[2995]	3038	# --nolog needs to be first, and is used in analyze-my-lvm
	3039	if [ "$1" = "--nolog" ] ; then
	3040	shift
	3041	LOGFILE=/dev/stderr
	3042	else
	3043	> $LOGFILE
	3044	fi
[1885]	3045	if [ "$1" = "--printvar" ] ; then
	3046	shift
	3047	if [ _"$1" != _"" ] ; then
	3048	set \| grep -Ew "^$1" \| cut -d= -f2
	3049	fi
[2183]	3050	exit 0
[1885]	3051	fi
	3052
[2963]	3053	LogFile "mindi v$MINDI_VERSION"
[3513]	3054	LogFile "-----------------------------"
	3055	LogFile "Start date : `date`"
	3056	LogFile "-----------------------------"
[2963]	3057	LogFile "$ARCH architecture detected"
	3058	LogFile "mindi called with the following arguments:"
[2978]	3059	echo "$@">> $LOGFILE
[2963]	3060	LogFile "-----------------------------"
[3650]	3061	pbdistrocheck --version \| grep Version >> $LOGFILE
[3513]	3062	LogFile "pbdistrocheck results:"
	3063	pbdistrocheck >> $LOGFILE
	3064	LogFile "-----------------------------"
[3650]	3065	LogFile "MondoRescue perl module:"
	3066	mr-getparam --version \| grep Version >> $LOGFILE
	3067	LogFile "-----------------------------"
[747]	3068
[1010]	3069	# Log some capital variables
	3070	[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
[3149]	3071	[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
[2963]	3072	LogFile "MONDO_SHARE = $MONDO_SHARE"
	3073	LogFile "MINDI_LIB = $MINDI_LIB"
	3074	LogFile "MINDI_SBIN = $MINDI_SBIN"
	3075	LogFile "MINDI_CONF = $MINDI_CONF"
[3388]	3076	# Purge from potential old run
	3077	if [ _"$MINDI_CACHE" = _"" ]; then
	3078	Die "MINDI_CACHE undefined"
	3079	else
	3080	LogFile "MINDI_CACHE = $MINDI_CACHE"
	3081	fi
	3082
[1885]	3083	if [ -f $MINDI_CONFIG ]; then
[2963]	3084	LogFile "-----------------------------"
	3085	LogFile " Mindi configuration file "
	3086	LogFile "-----------------------------"
[1885]	3087	grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
[2963]	3088	LogFile "-----------------------------"
[1885]	3089	fi
[2995]	3090	LogFile "In Mindi"
	3091	LogFile "--------"
	3092	LogFile "EXTRA_SPACE = $EXTRA_SPACE"
	3093	LogFile "--------"
[1010]	3094
[747]	3095	trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
[1010]	3096
	3097	# Sanity checks
	3098	which which > /dev/null 2> /dev/null \|\| Die "Please install 'which'."
	3099	which strings > /dev/null 2> /dev/null \|\| Die "Please install binutils and libbinutils; you have no 'strings' executable."
	3100	which gawk > /dev/null 2> /dev/null \|\| Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
	3101	which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` \|\| AWK="`which awk 2>/dev/null`"
	3102	if which awk &> /dev/null ; then
	3103	if ! which gawk &> /dev/null ; then
[3565]	3104	LogAll "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
[1010]	3105	fi
	3106	fi
	3107	which mke2fs > /dev/null 2> /dev/null \|\| Die "Please put mke2fs in system path"
[2222]	3108	[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
[1010]	3109
[3005]	3110	[ "`echo $KERVERRUN \| grep -E "2\.4\.[0-6]" \| grep -vE "2\.4\.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
[1010]	3111
	3112	# Update the PATH variable if incomplete
	3113	if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
	3114	PATH=$PATH:/sbin:/usr/sbin
	3115	export PATH
[2963]	3116	LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
	3117	LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
[3255]	3118	LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
[1010]	3119	fi
	3120
[1737]	3121	if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
[3368]	3122	Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
[1010]	3123	fi
	3124
[3149]	3125	### TODO
[747]	3126	### Fix as it's not mandatory on ia64
	3127	if [ "$ARCH" = "ia64" ] ; then
[1010]	3128	if which elilo &> /dev/null ; then
	3129	LILO_EXE=elilo
	3130	else
[2024]	3131	LILO_EXE=`which false 2> /dev/null`
[1010]	3132	fi
[747]	3133	else
	3134	FindIsolinuxBinary
	3135	fi
	3136	trap "Aborted" SIGTERM
	3137	DONE="\r\t\t\t\t\t\t\t\tDone. "
	3138	kernelpath=""
[1010]	3139	MONDO_ROOT=/var/cache/mondo
[747]	3140	mkdir -p $MONDO_ROOT
	3141
	3142	if [ -d "/proc/lvm" ]; then
	3143	# LVM v1
	3144	LVMCMD=""
	3145	LVM="v1"
	3146	elif [ -d "/dev/mapper" ]; then
	3147	# LVM v2
	3148	LVMCMD="lvm"
	3149	LVM="v2"
	3150	else
	3151	LVM="false"
	3152	fi
[3149]	3153
	3154	if [ -e "/proc/cmdline" ]; then
	3155	CMDLINE="/proc/cmdline"
	3156	elif [ -e "/tmp/cmdline" ]; then
	3157	CMDLINE="/tmp/cmdline"
	3158	else
	3159	CMDLINE="/dev/null"
	3160	fi
	3161
[2963]	3162	LogFile "INFO: LVM set to $LVM"
	3163	LogFile "----------"
	3164	LogFile "mount result:"
	3165	LogFile "-------------"
[1230]	3166	mount >> $LOGFILE
[3479]	3167	if [ -e "/etc/raidtab" ]; then
[2963]	3168	LogFile "-------------"
	3169	LogFile "/etc/raidtab content:"
	3170	LogFile "-------------"
[1315]	3171	cat /etc/raidtab >> $LOGFILE
[3077]	3172	else
[3073]	3173	LogFile "No file /etc/raidtab"
[1315]	3174	fi
[3479]	3175	if [ -e "/etc/mdadm.conf" ]; then
[2981]	3176	LogFile "-------------"
	3177	LogFile "/etc/mdadm.conf content:"
	3178	LogFile "-------------"
	3179	cat /etc/mdadm.conf >> $LOGFILE
[3077]	3180	else
[3149]	3181	LogFile "-------------"
[3073]	3182	LogFile "No file /etc/mdadm.conf"
[2981]	3183	fi
[2963]	3184	LogFile "-------------"
[3149]	3185	LogFile "cat $CMDLINE"
[2963]	3186	LogFile "-------------"
[3149]	3187	cat $CMDLINE >> $LOGFILE
[2963]	3188	LogFile "-------------"
	3189	LogFile "cat /proc/swaps:"
	3190	LogFile "-------------"
[2014]	3191	cat /proc/swaps >> $LOGFILE
[2963]	3192	LogFile "-------------"
[3479]	3193	if [ -e "/proc/mdstat" ]; then
[3073]	3194	LogFile "cat /proc/mdstat:"
	3195	LogFile "-------------"
	3196	cat /proc/mdstat >> $LOGFILE
[3077]	3197	else
[3073]	3198	LogFile "No pseudo file /proc/mdstat"
	3199	fi
[2981]	3200	LogFile "-------------"
[2963]	3201	LogFile "cat /proc/partitions:"
	3202	LogFile "-------------"
[2015]	3203	cat /proc/partitions >> $LOGFILE
[2963]	3204	LogFile "-------------"
	3205	LogFile "cat /proc/filesystems:"
	3206	LogFile "-------------"
[2015]	3207	cat /proc/filesystems >> $LOGFILE
[2963]	3208	LogFile "-------------"
	3209	LogFile "lsmod result:"
	3210	LogFile "-------------"
[1021]	3211	lsmod >> $LOGFILE
[2431]	3212	MODULES="`cat /proc/modules \| $AWK '{print $1}'`"
[1531]	3213	if [ -x /usr/sbin/esxcfg-module ]; then
[2963]	3214	LogFile "-------------"
	3215	LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
	3216	LogFile "-------------"
	3217	LogFile "VMWare modules"
	3218	LogFile "-------------"
[1531]	3219	/usr/sbin/esxcfg-module -l >> $LOGFILE
[2431]	3220	MODULES="$MODULES `/usr/sbin/esxcfg-module -l \| $AWK '{print $1}'`"
[1497]	3221	fi
[3149]	3222	LogFile "-------------"
[2963]	3223	LogFile "FORCE_MODS:"
	3224	LogFile "-------------"
[3065]	3225	LogFile "$FORCE_MODS"
[2963]	3226	LogFile "-------------"
	3227	LogFile "DENY_MODS:"
	3228	LogFile "-------------"
[3065]	3229	LogFile "$DENY_MODS"
[2963]	3230	LogFile "-------------"
	3231	LogFile "df result:"
	3232	LogFile "----------"
[3117]	3233	df -aT >> $LOGFILE
[2963]	3234	LogFile "-------------"
[3117]	3235	LogFile "df -i result:"
	3236	LogFile "----------"
	3237	df -i >> $LOGFILE
	3238	LogFile "-------------"
	3239	if [ -r /boot/grub/menu.lst ]; then
	3240	LogFile "-------------"
	3241	LogFile "INFO: /boot/grub/menu.lst content"
	3242	LogFile "-------------"
	3243	cat /boot/grub/menu.lst >> $LOGFILE
[3123]	3244	LogFile "-------------"
[3117]	3245	fi
[3123]	3246	if [ -r /boot/grub/grub.conf ]; then
[3117]	3247	LogFile "-------------"
[3123]	3248	LogFile "INFO: /boot/grub/grub.conf content"
	3249	LogFile "-------------"
	3250	cat /boot/grub/grub.conf >> $LOGFILE
	3251	LogFile "-------------"
	3252	fi
	3253	if [ -r /boot/grub/grub.cfg ]; then
	3254	LogFile "-------------"
	3255	LogFile "INFO: /boot/grub/grub.cfg content"
	3256	LogFile "-------------"
	3257	cat /boot/grub/grub.cfg >> $LOGFILE
	3258	LogFile "-------------"
	3259	fi
	3260	if [ -r /boot/grub/device.map ]; then
	3261	LogFile "-------------"
[3117]	3262	LogFile "INFO: /boot/grub/device.map content"
	3263	LogFile "-------------"
[3123]	3264	cat /boot/grub/device.map >> $LOGFILE
	3265	LogFile "-------------"
[3117]	3266	fi
[3643]	3267	if [ -r /boot/grub2/device.map ]; then
	3268	LogFile "-------------"
	3269	LogFile "INFO: /boot/grub2/device.map content"
	3270	LogFile "-------------"
	3271	cat /boot/grub2/device.map >> $LOGFILE
	3272	LogFile "-------------"
	3273	fi
[3117]	3274	if [ -r /etc/lilo.conf ]; then
	3275	LogFile "-------------"
	3276	LogFile "INFO: /etc/lilo.conf content"
	3277	LogFile "-------------"
	3278	cat /etc/lilo.conf >> $LOGFILE
	3279	fi
[3378]	3280	if [ -d /boot/efi ]; then
[3425]	3281	gcf=`find /boot/efi -name 'grub.c*'`
[3384]	3282	if [ _"$gcf" = _"" ]; then
[3425]	3283	LogFile "Found a /boot/efi directory without a grub config file in it"
[3384]	3284	else
	3285	LogFile "-------------"
	3286	LogFile "INFO: $gcf content"
	3287	LogFile "-------------"
	3288	cat $gcf >> $LOGFILE
	3289	LogFile "-------------"
	3290	fi
[3378]	3291	fi
	3292
[3146]	3293	LogFile "Full fdisk info"
	3294	LogFile "---------------"
	3295	$FDISK -l >> $LOGFILE
	3296	LogFile "----------------"
[747]	3297
[1723]	3298	# Compute libata version
[2649]	3299	laver=`modinfo libata 2> /dev/null \| grep -Ei '^Version:' \| cut -d: -f2 \| cut -d. -f1 \| sed 's/ *//g' 2> /dev/null`
[1723]	3300	# If libata v2 is used then remove ide-generic as it will perturbate boot
[1726]	3301	if [ "`echo $MODULES \| grep libata`" ]; then
[1727]	3302	if [ "$laver" = "2" ]; then
[1726]	3303	DENY_MODS="$DENY_MODS ide-generic"
[2963]	3304	LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
	3305	LogFile "-------------"
[1726]	3306	fi
[1723]	3307	fi
	3308
[2963]	3309	# Check for McAfee which disturbs the access to some files (tgz in articular)
[2976]	3310	if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
[2963]	3311	LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
	3312	LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
	3313	LogFile "WARNING: You have two options:"
	3314	LogFile "WARNING: - Exclude all directories with special files (check McAfee System Events Log)"
	3315	LogFile "WARNING: - Disable the scanner during the backup"
	3316	fi
	3317
[1684]	3318	#
	3319	# If we have a USB device we need to store info
	3320	# and remove it from the parameters line
	3321	#
[747]	3322	if [ "$#" -ne "0" ] ; then
[1684]	3323	if [ "$1" = "--usb" ] ; then
	3324	shift
	3325	USBDEVICE=$1
	3326	if [ _"$USBDEVICE" = _"" ]; then
	3327	Die "No USB device specified"
	3328	fi
	3329	shift
	3330	fi
	3331	fi
	3332
	3333	if [ "$#" -ne "0" ] ; then
[747]	3334	if [ "$1" = "--findkernel" ] ; then
[2880]	3335	resk=`TryToFindKernelPath`
[1336]	3336	# Avoids logfile content for mondo
	3337	export MONDO_SHARE=""
[2880]	3338	if [ "$resk" = "" ] ; then
[2838]	3339	if [ $KERNEL_IS_XEN = "yes" ]; then
	3340	echo "$xenkernelpath"
[2963]	3341	LogFile "INFO: xenkernelpath = $xenkernelpath"
[2860]	3342	MindiExit 0
[2838]	3343	else
[2860]	3344	MindiExit -1
[2838]	3345	fi
[747]	3346	else
[2880]	3347	echo "$resk"
[2963]	3348	LogFile "INFO: kernelpath = $resk"
[2860]	3349	MindiExit 0
[747]	3350	fi
[1720]	3351	elif [ "$1" = "--locatedeps" ] ; then
	3352	[ ! "$2" ] && Die "Please specify the binary to look at"
[2438]	3353	LocateDeps $*
[1720]	3354	# Avoids logfile content for mondo
	3355	export MONDO_SHARE=""
	3356	MindiExit $?
[1815]	3357	elif [ "$1" = "--readalllink" ] ; then
	3358	[ ! "$2" ] && Die "Please specify the binary to look at"
	3359	# Avoids logfile content for mondo
	3360	export MONDO_SHARE=""
[3231]	3361	mr-read-all-link $2
[1815]	3362	MindiExit $?
[3518]	3363	elif [ "$1" = "--makebcf" ] ; then
[3520]	3364	[ ! "$2" ] && Die "Please specify the boot loader to check (syslinux, grub, grub2)"
[3518]	3365	MakeBootConfFile $2
[3519]	3366	MindiExit 0
[2731]	3367	elif [ "$1" = "--makemessage" ] ; then
[2948]	3368	MakeMessageFile \| cut -c1-80
[2731]	3369	MindiExit 0
[747]	3370	elif [ "$1" = "--makemountlist" ] ; then
	3371	[ ! "$2" ] && Die "Please specify the output file"
	3372	MakeMountlist $2
[2432]	3373	CheckMountlist $2
[1336]	3374	# Avoids logfile content for mondo
	3375	export MONDO_SHARE=""
[925]	3376	MindiExit $?
	3377	elif [ "$1" = "-V" ] \|\| [ "$1" = "-v" ] \|\| [ "$1" = "--version" ] \|\| [ "$1" = "-version" ] ; then
	3378	echo "Mindi v$MINDI_VERSION"
[1336]	3379	# Avoids logfile content for mondo
	3380	export MONDO_SHARE=""
[925]	3381	MindiExit 0
[3585]	3382	elif [ "$1" = "--ironic" ] ; then
	3383	[ ! "$2" ] && [ ! -f "$2" ] && Die "Please specify the kernel to use"
	3384	[ ! "$3" ] && [ ! -f "$3" ] && Die "Please specify the initramfs to use"
	3385	[ "$4" ] && [ "$4" != "UEFI" ] && [ "$4" != "BIOS" ] && Die "Please specify the boot mode as BIOS or UEFI"
	3386	#TODO: See how we can influence the boot loader
	3387	[ "$5" ] && [ "$5" != "isolinux" ] && [ "$5" != "grub" ] && [ "$5" != "grub2" ] && Die "Please specify the boot loader as isolinux or grub or grub2"
	3388	if [ "$5" ]; then
	3389	boottype=$5
	3390	fi
	3391	[ "$6" ] && [ ! -e "$6" ] && Die "Please specify an existing boot loader path for $boottype"
	3392	if [ "$6" ]; then
	3393	bootbin=$6
	3394	fi
	3395	kernelpath=$2
	3396	BOOT_TYPE=$4
[3590]	3397	# Ironic requires some specific boot parameters
[3588]	3398	MINDI_ADDITIONAL_BOOT_PARAMS="selinux=0 barrier=off udevtimeout=10 systemd.debug-shell boot_method=vmedia"
	3399	MINDI_BOOT_TIMEOUT=10
[3590]	3400	EXTRA_SPACE=1500000
	3401	# Get the local improvements to the configuration
[3589]	3402	if [ -f $MINDI_CONFIG ]; then
	3403	. $MINDI_CONFIG
	3404	fi
[3585]	3405	PrepareBootDir
[3692]	3406	PrepareBigDirTar
	3407	CleanBigDir
[3585]	3408	cp $3 $MINDI_TMP/initrd.img
	3409	MakeBootableDevice ISO
	3410	MindiExit 0
[747]	3411	elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
[940]	3412	MONDO_TMP=$2
[3661]	3413	# Change MINDI_TMP for the one provided by mondo
[940]	3414	# So that it can get back the built files
[2153]	3415	if [ _"$MONDO_TMP" = _"" ]; then
	3416	Die "MONDO_TMP is empty, aborting"
	3417	fi
	3418	if [ _"$MONDO_TMP" = _"/" ]; then
	3419	Die "MONDO_TMP is /, aborting"
	3420	fi
[2092]	3421	mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
[1010]	3422	rmdir $MINDI_TMP
[1486]	3423	export MINDI_TMP=$MONDO_TMP
[953]	3424	mkdir -p $MINDI_TMP
[2238]	3425
[1696]	3426	# This is the scratch dir in mondo - subdir images
[1880]	3427	MINDI_CACHE=$3
[3388]	3428	LogFile "MINDI_CACHE = $MINDI_CACHE"
[2238]	3429
[925]	3430	kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
[2681]	3431	[ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
	3432
[747]	3433	###
	3434	### Sq-Modification...
	3435	### Attempt to locate kernel specific module path
	3436	### if module path is found then use it other wise use uname -r to set it...
	3437	###
[2629]	3438	if [ $KERNEL_IS_XEN = "yes" ]; then
[3149]	3439	LogAll "INFO: xenkernelpath = $xenkernelpath"
[2629]	3440	fi
[2657]	3441	kernelname=`echo $kernelpath \| cut -d'-' -f2- \| sed 's/.[bg]z[2]*$//'`
[3231]	3442	if [ ! -d "/lib/modules/$kernelname" ]; then
[3149]	3443	LogAll "WARNING: Module path for ${kernelpath} not found..."
	3444	LogAll " using running kernel\'s modules."
[2292]	3445	kernelname=$KERVERRUN
[3149]	3446	else
[3426]	3447	LogAll "INFO: Using modules for kernel: ${kernelname}"
[747]	3448	fi
[3149]	3449	LogAll "INFO: kernelname = $kernelname"
	3450	LogAll "INFO: kernelpath = $kernelpath"
[747]	3451	###
	3452	### end of Sq-Modification
	3453	###
[925]	3454	TAPEDEV=$5
	3455	TAPESIZE=$6
	3456	FILES_IN_FILELIST=$7
	3457	USE_LZO=$8
	3458	CDRECOVERY=$9
[747]	3459	if [ "${10}" = "(null)" ] \|\| [ "${10}" = "" ] ; then
	3460	IMAGE_DEVS=""
	3461	else
	3462	IMAGE_DEVS="`echo "${10}" \| tr '\|' ' '`"
	3463	fi
[925]	3464	if [ "${11}" ] ; then
	3465	LILO_OPTIONS=""
[3149]	3466	# LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
[925]	3467	fi
	3468	LAST_FILELIST_NUMBER=${12}
[747]	3469	ESTIMATED_TOTAL_NOOF_SLICES=${13}
[2564]	3470	export MINDI_EXCLUDE_DEVS="${14}"
[747]	3471	USE_COMP="${15}"
	3472	USE_LILO="${16}"
[925]	3473	USE_STAR="${17}"
	3474	INTERNAL_TAPE_BLOCK_SIZE="${18}"
[747]	3475	DIFFERENTIAL="${19}"
[998]	3476	USE_GZIP="${20}"
[3353]	3477	USE_LZMA="${21}"
	3478	NOT_BOOT="${22}"
[3397]	3479	BOOT_TYPE="${23}"
[747]	3480	[ "$USE_COMP" = "" ] && USE_COMP=yes
[998]	3481	[ "$USE_GZIP" = "" ] && USE_GZIP=no
[3353]	3482	[ "$USE_LZMA" = "" ] && USE_LZMA=no
[747]	3483	[ "$NOT_BOOT" = "" ] && NOT_BOOT=no
[3565]	3484	[ "$TAPEDEV" ] && LogAll "INFO: This is a tape-based backup. Fine."
[1696]	3485	# MONDO_ROOT is the real scratchdir
[1880]	3486	MONDO_ROOT=`echo $MINDI_CACHE \| sed 's/\(.\)\/./\1/'`
[938]	3487	if [ _"$MONDO_ROOT" != _"" ]; then
	3488	mkdir -p $MONDO_ROOT
	3489	else
	3490	Die "MONDO_ROOT is undefined"
	3491	fi
[747]	3492	else
[3585]	3493	LogScreen "Syntax: mindi [--custom ....MondoRescue parameters...]"
	3494	LogScreen " mindi --ironic kernel initrd [BIOS\|UEFI] [syslinux\|grub\|grub2] [/path/to/bootloader]"
	3495	LogScreen " mindi --locatedeps file"
	3496	LogScreen " mindi --makemessage"
[3586]	3497	LogScreen " mindi --findkernel"
[3585]	3498	LogScreen " mindi --makemountlist file"
	3499	LogScreen " mindi --makebcf bootloader"
	3500	LogScreen " mindi -V"
[925]	3501	MindiExit -1
[747]	3502	fi
	3503	fi
[2238]	3504
	3505	if [ _"$MINDI_CACHE" != _"" ]; then
	3506	rm -rf $MINDI_CACHE/* 2> /dev/null
	3507	mkdir -p $MINDI_CACHE
	3508	fi
	3509
[747]	3510	[ "$CDRECOVERY" = "yes" ] \|\| CDRECOVERY=no
	3511
[1684]	3512	if [ _"$MONDO_SHARE" = _"" ]; then
[3565]	3513	LogAll "Mindi Linux mini-distro generator v$MINDI_VERSION"
	3514	LogAll "Latest Mindi is available from http://www.mondorescue.org"
	3515	LogAll "BusyBox sources are available from http://www.busybox.net"
	3516	LogAll "------------------------------------------------------------------------------"
[747]	3517	else
[3426]	3518	LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
[747]	3519	fi
[3231]	3520	if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
[3565]	3521	LogAll "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 \| head -1`"
[1005]	3522	else
[3565]	3523	LogAll "ERROR: Unable to find mindi-busybox, please install it"
[1005]	3524	MindiExit -1
	3525	fi
[747]	3526
	3527	for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
[3111]	3528	modinfo $i 2> /dev/null 1> /dev/null
[3014]	3529	if [ $? -eq 0 ]; then
	3530	modprobe $i 2>&1 > /dev/null
	3531	fi
[747]	3532	done
	3533
[2963]	3534	LogFile "DIFFERENTIAL = $DIFFERENTIAL"
	3535	LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
	3536	LogFile "NOT_BOOT = '$NOT_BOOT'"
[747]	3537	if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
[3565]	3538	LogAll "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
[3278]	3539	MakeMondoConfigFile $MINDI_TMP/$MRCFG
[940]	3540	MakeMountlist $MINDI_TMP/mountlist.txt
[2432]	3541	CheckMountlist $MINDI_TMP/mountlist.txt
[940]	3542	mkdir -p $MINDI_TMP/small-all/tmp
[3565]	3543	cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} $MINDI_TMP/small-all/tmp 2>> $LOGFILE \|\| Die "Cannot copy small all.tar.gz"
	3544	(cd $MINDI_TMP/small-all ; tar -cv ./tmp \| gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log \|\| Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log)
[747]	3545	sleep 2
[3565]	3546	LogAll "Done. Exiting."
[925]	3547	MindiExit 0
[747]	3548	fi
	3549
[1690]	3550	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[3565]	3551	LogAll "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
[1684]	3552	fi
	3553
[747]	3554	if [ "$kernelpath" = "" ] ; then
[1335]	3555	[ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
[3522]	3556	echo -en "\nDo you want to use your own kernel to build the boot disk ([y]/n) ?"
[966]	3557	read ch
	3558	if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
[3651]	3559	USE_OWN_KERNEL="yes"
[1809]	3560	else
	3561	USE_OWN_KERNEL="no"
[747]	3562	fi
	3563	if [ "$USE_OWN_KERNEL" = "yes" ]; then
[925]	3564	kernelpath=`TryToFindKernelPath`
	3565	if [ "$kernelpath" = "" ] ; then
	3566	echo -n "Please enter kernel path : "
	3567	read kernelpath
	3568	fi
[747]	3569	fi
	3570	fi
[3231]	3571
[1880]	3572	echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
[3565]	3573	[ "$(($RANDOM%64))" -eq "0" ] && LogAll "INFO: Dude, I've looked inside your computer and it's really dusty..."
[747]	3574
[3692]	3575	PrepareBigDir
	3576	bigdir_size=`du -sk $bigdir \| cut -f1`
	3577	LogFile "---------------------------"
	3578	LogFile "INFO: bigdir size is $bigdir_size KB"
[1983]	3579
[3692]	3580	PrepareTargetDir \|\| Die "Could not create initrd.img in target dir"
	3581	targetdir_size=`du -sk $targetdir \| cut -f1`
	3582	LogFile "---------------------------"
	3583	LogFile "INFO: targetdir size is $targetdir_size KB"
	3584	LogFile "---------------------------- "
[3522]	3585
[3692]	3586	# Now we can compute it correctly with some extra in case of...
	3587	export ramdisk_size=$(($bigdir_size+$targetdir_size+$EXTRA_SPACE))
	3588	# And now we can patch the value in conf files
	3589	PatchBootFiles
	3590	# And tar them
	3591	PrepareBigDirTar
	3592	# And prepare boot setup
	3593	MakeBootInitFile
	3594	# Now cleans up stuff
	3595	CleanBigDir
	3596	CleanTargetDir
	3597
[747]	3598	[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
[3653]	3599	...Or type 'memtest' to test your machine's RAM thoroughly.\n"
[747]	3600
[1684]	3601	if [ _"$MONDO_SHARE" = _"" ]; then
[1983]	3602	OfferToMakeBootableISO
[1684]	3603	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
[1983]	3604	OfferToMakeBootableUSB
[1684]	3605	fi
[3522]	3606	LogAll "INFO: Mindi Finished"
[747]	3607	elif [ "$TAPEDEV" ] ; then
[2078]	3608	if [ "$ARCH" != "ia64" ] ; then
	3609	# We need to keep the img file as boot file for ia64 platform
	3610	rm -f $MINDI_CACHE/{img,iso}
	3611	else
	3612	rm -f $MINDI_CACHE/*iso
	3613	fi
[1898]	3614	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	3615	OfferToMakeBootableUSB
[1898]	3616	fi
[1983]	3617	OfferToMakeBootableISO
[1880]	3618	if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
	3619	cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
[747]	3620	else
[925]	3621	Die "Cannot find all.tar.gz, to be written to tape"
[747]	3622	fi
[1695]	3623	elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	3624	OfferToMakeBootableUSB
[747]	3625	else
[1983]	3626	OfferToMakeBootableISO
[747]	3627	fi
[3391]	3628
[3396]	3629	if [ -f $MINDI_TMP/$MRCFG ]; then
[3425]	3630	LogFile "INFO: Your $MRCFG file is:"
	3631	LogFile "--------------------------"
	3632	cat $MINDI_TMP/$MRCFG >> $LOGFILE
	3633	LogFile "--------------------------"
[3391]	3634	else
[3421]	3635	if [ _"$MONDO_SHARE" != _"" ] ; then
[3565]	3636	LogAll "ERROR: You don't have a $MRCFG file !"
[3421]	3637	fi
[3391]	3638	fi
[747]	3639	# cleanup
[925]	3640	MindiExit 0

Note: See TracBrowser for help on using the repository browser.

Download in other formats: