source: MondoRescue/branches/3.3/mindi-busybox/archival/bzip2.c@ 3621

/*
 * Copyright (C) 2007 Denys Vlasenko <vda.linux@googlemail.com>
 *
 * This file uses bzip2 library code which is written
 * by Julian Seward <jseward@bzip.org>.
 * See README and LICENSE files in bz/ directory for more information
 * about bzip2 library code.
 */

//config:config BZIP2
//config:   bool "bzip2"
//config:   default y
//config:   help
//config:     bzip2 is a compression utility using the Burrows-Wheeler block
//config:     sorting text compression algorithm, and Huffman coding. Compression
//config:     is generally considerably better than that achieved by more
//config:     conventional LZ77/LZ78-based compressors, and approaches the
//config:     performance of the PPM family of statistical compressors.
//config:
//config:     Unless you have a specific application which requires bzip2, you
//config:     should probably say N here.

//applet:IF_BZIP2(APPLET(bzip2, BB_DIR_USR_BIN, BB_SUID_DROP))
//kbuild:lib-$(CONFIG_BZIP2) += bzip2.o

//usage:#define bzip2_trivial_usage
//usage:       "[OPTIONS] [FILE]..."
//usage:#define bzip2_full_usage "\n\n"
//usage:       "Compress FILEs (or stdin) with bzip2 algorithm\n"
//usage:     "\n    -1..9   Compression level"
//usage:     "\n    -d  Decompress"
//usage:     "\n    -c  Write to stdout"
//usage:     "\n    -f  Force"

#include "libbb.h"
#include "bb_archive.h"

#define CONFIG_BZIP2_FAST 1

/* Speed test:
 * Compiled with gcc 4.2.1, run on Athlon 64 1800 MHz (512K L2 cache).
 * Stock bzip2 is 26.4% slower than bbox bzip2 at SPEED 1
 * (time to compress gcc-4.2.1.tar is 126.4% compared to bbox).
 * At SPEED 5 difference is 32.7%.
 *
 * Test run of all CONFIG_BZIP2_FAST values on a 11Mb text file:
 *     Size   Time (3 runs)
 * 0:  10828  4.145 4.146 4.148
 * 1:  11097  3.845 3.860 3.861
 * 2:  11392  3.763 3.767 3.768
 * 3:  11892  3.722 3.724 3.727
 * 4:  12740  3.637 3.640 3.644
 * 5:  17273  3.497 3.509 3.509
 */


#define BZ_DEBUG 0
/* Takes ~300 bytes, detects corruption caused by bad RAM etc */
#define BZ_LIGHT_DEBUG 0

#include "libarchive/bz/bzlib.h"

#include "libarchive/bz/bzlib_private.h"

#include "libarchive/bz/blocksort.c"
#include "libarchive/bz/bzlib.c"
#include "libarchive/bz/compress.c"
#include "libarchive/bz/huffman.c"

/* No point in being shy and having very small buffer here.
 * bzip2 internal buffers are much bigger anyway, hundreds of kbytes.
 * If iobuf is several pages long, malloc() may use mmap,
 * making iobuf is page aligned and thus (maybe) have one memcpy less
 * if kernel is clever enough.
 */
enum {
    IOBUF_SIZE = 8 * 1024
};

static uint8_t level;

/* NB: compressStream() has to return -1 on errors, not die.
 * bbunpack() will correctly clean up in this case
 * (delete incomplete .bz2 file)
 */

/* Returns:
 * -1 on errors
 * total written bytes so far otherwise
 */
static
IF_DESKTOP(long long) int bz_write(bz_stream *strm, void* rbuf, ssize_t rlen, void *wbuf)
{
    int n, n2, ret;

    strm->avail_in = rlen;
    strm->next_in = rbuf;
    while (1) {
        strm->avail_out = IOBUF_SIZE;
        strm->next_out = wbuf;

        ret = BZ2_bzCompress(strm, rlen ? BZ_RUN : BZ_FINISH);
        if (ret != BZ_RUN_OK /* BZ_RUNning */
         && ret != BZ_FINISH_OK /* BZ_FINISHing, but not done yet */
         && ret != BZ_STREAM_END /* BZ_FINISHed */
        ) {
            bb_error_msg_and_die("internal error %d", ret);
        }

        n = IOBUF_SIZE - strm->avail_out;
        if (n) {
            n2 = full_write(STDOUT_FILENO, wbuf, n);
            if (n2 != n) {
                if (n2 >= 0)
                    errno = 0; /* prevent bogus error message */
                bb_perror_msg(n2 >= 0 ? "short write" : bb_msg_write_error);
                return -1;
            }
        }

        if (ret == BZ_STREAM_END)
            break;
        if (rlen && strm->avail_in == 0)
            break;
    }
    return 0 IF_DESKTOP( + strm->total_out );
}

static
IF_DESKTOP(long long) int FAST_FUNC compressStream(transformer_state_t *xstate UNUSED_PARAM)
{
    IF_DESKTOP(long long) int total;
    ssize_t count;
    bz_stream bzs; /* it's small */
#define strm (&bzs)
    char *iobuf;
#define rbuf iobuf
#define wbuf (iobuf + IOBUF_SIZE)

    iobuf = xmalloc(2 * IOBUF_SIZE);
    BZ2_bzCompressInit(strm, level);

    while (1) {
        count = full_read(STDIN_FILENO, rbuf, IOBUF_SIZE);
        if (count < 0) {
            bb_perror_msg(bb_msg_read_error);
            total = -1;
            break;
        }
        /* if count == 0, bz_write finalizes compression */
        total = bz_write(strm, rbuf, count, wbuf);
        if (count == 0 || total < 0)
            break;
    }

    /* Can't be conditional on ENABLE_FEATURE_CLEAN_UP -
     * we are called repeatedly
     */
    BZ2_bzCompressEnd(strm);
    free(iobuf);

    return total;
}

int bzip2_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int bzip2_main(int argc UNUSED_PARAM, char **argv)
{
    unsigned opt;

    /* standard bzip2 flags
     * -d --decompress force decompression
     * -z --compress force compression
     * -k --keep     keep (don't delete) input files
     * -f --force    overwrite existing output files
     * -t --test     test compressed file integrity
     * -c --stdout   output to standard out
     * -q --quiet    suppress noncritical error messages
     * -v --verbose  be verbose (a 2nd -v gives more)
     * -s --small    use less memory (at most 2500k)
     * -1 .. -9      set block size to 100k .. 900k
     * --fast        alias for -1
     * --best        alias for -9
     */

    opt_complementary = "s2"; /* -s means -2 (compatibility) */
    /* Must match bbunzip's constants OPT_STDOUT, OPT_FORCE! */
    opt = getopt32(argv, "cfv" IF_BUNZIP2("dt") "123456789qzs");
#if ENABLE_BUNZIP2 /* bunzip2_main may not be visible... */
    if (opt & 0x18) // -d and/or -t
        return bunzip2_main(argc, argv);
    opt >>= 5;
#else
    opt >>= 3;
#endif
    opt = (uint8_t)opt; /* isolate bits for -1..-8 */
    opt |= 0x100; /* if nothing else, assume -9 */
    level = 1;
    while (!(opt & 1)) {
        level++;
        opt >>= 1;
    }

    argv += optind;
    option_mask32 &= 0x7; /* ignore all except -cfv */
    return bbunpack(argv, compressStream, append_ext, "bz2");
}