Context Navigation

source: MondoRescue/branches/3.2/mindi/mindi@ 3595

Visit:

Last change on this file since 3595 was 3595, checked in by Bruno Cornec, 8 years ago
Fix #801 by adding support for the new kbd conf file for Debian 8. Needs test with a foreign kbd
Property svn:executable set to ``* Property svn:keywords set to `Rev Id`
File size: 127.0 KB

Rev	Line
[747]	1	#!/bin/bash
	2
	3	# $Id: mindi 3595 2016-07-06 13:16:22Z bruno $
	4	#
	5	#-----------------------------------------------------------------------------
	6	# mindi - mini-Linux distro based on the user's filesystem & distribution
	7	#
[1880]	8	# Mindi can create a multi-image boot/root kit. The first image is the boot
[747]	9	# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
	10	# the third disk is data disk #2; and so it goes.
	11	#
	12	# See http://www.mondorescue.org for details.
	13	#-----------------------------------------------------------------------------
	14
	15	### Which arch are we on (useful for ia64 port)
[1565]	16	ARCH=`/bin/uname -m`
[2292]	17	KERVERRUN=`/bin/uname -r`
	18	# By default we use the running kernel as a reference
	19	KERVER=$KERVERRUN
[747]	20
[2442]	21	# In case of problem with udev you can try to add udevdebug
[2564]	22	MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
[3053]	23	MINDI_DEFAULT_BOOT_OPTION="interactive"
	24	# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
	25	# So this parameter only applies to non CD recovery.
	26	MINDI_BOOT_TIMEOUT="300"
[747]	27
[1691]	28	MINDI_REV=PBREV
	29	MINDI_VER=PBVER
[747]	30
	31	MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
	32	MINDI_PREFIX=XXX
	33	MINDI_CONF=YYY
	34	MINDI_SBIN=${MINDI_PREFIX}/sbin
[934]	35	MINDI_LIB=LLL
[3149]	36	MINDI_CACHE=/var/cache/mindi
[747]	37
[3278]	38	MRCFG=mondorestore.cfg
	39
[925]	40	# Temporary directory for mindi
[3499]	41	TMPDIR=${TMPDIR:=/tmp}
	42	if [ ! -d $TMPDIR ]; then
	43	mkdir -p $TMPDIR
	44	fi
[925]	45
[3522]	46	EXTRA_SPACE=150000 # increase if you run out of ramdisk space
[747]	47
	48	PROMPT_MAKE_CD_IMAGE="yes"
	49	# Ask if you want to make a CD Image to be written?
[3522]	50	# if this is set to 'no' in the conf file, then the image will be created automatically
[747]	51
[1684]	52	PROMPT_MAKE_USB_IMAGE="yes"
	53	# Ask if you want to make a USB Image to be written?
[3522]	54	# if this is set to 'no' in the conf file, then the image will be created automatically
[1684]	55
[966]	56	USE_OWN_KERNEL="yes"
[747]	57	# If set to "no", you will be prompted for whether or not
	58	# you want to use your own kernel, or the supplied default.
	59	# If "yes" mindi will automatically use your own kernel.
[925]	60
[2629]	61	KERNEL_IS_XEN="no"
	62	# If set to "no", the kernel is not a Xen kernel
	63	# If "yes", mindi will modify isolinux.cfg for the Xen kernel.
[2880]	64	xenkernelpath=""
[2629]	65
[747]	66	MY_FSTAB=/etc/fstab
	67	TAPE_MODS="ht st osst ide-tape ide_tape"
[3540]	68	SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa hpdsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
[747]	69
	70	# ide-probe-mod
[3572]	71	IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc raid0 raid1 raid456"
[747]	72	PCMCIA_MODS="pcmcia_core ds yenta_socket"
[3474]	73	USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
[3446]	74	NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
[3573]	75	CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 nls_cp437 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash dm-thin-pool multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs nls_utf8"
[1230]	76	# Replace with that line for HP OCMP e.g.
[2073]	77	#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
[3055]	78	DENY_MODS="kqemu vxfen"
[1399]	79	# Force some modules to be included
[1354]	80	FORCE_MODS=""
[925]	81
[747]	82	LOGFILE=/var/log/mindi.log
	83	BOOT_MEDIA_MESSAGE="\
[3173]	84	To format and restore all files automatically, type '0enuke07' <enter>.\n\
	85	To restore some/all files interactively, type '0einteractive07' <enter>.\n\
	86	To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
	87	To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
	88	\n\
	89	You may add one or more parameters as well as per the function keys below\n\
	90	e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
	91	\n\
	92	If restoring from a local external disk or USB key, do not connect it \n\
	93	until the boot-up has finished.\n\
	94	\n\
	95	\n0eF107-Main \| Boot Parameters 0eF207-1/2 \| 0eF307-2/2 \| 0eF407-PXE\n\
[747]	96	"
[3377]	97	FDISK=$MINDI_SBIN/mr-parted2fdisk
[747]	98
[925]	99	# Using a config file allow to overwrite some values
	100	MINDI_CONFIG="$MINDI_CONF/mindi.conf"
	101	if [ -f $MINDI_CONFIG ]; then
	102	. $MINDI_CONFIG
	103	fi
[1885]	104	DEPLIST_FILE="$MINDI_CONF/deplist.txt"
[2409]	105	DEPLIST_DIR="$MINDI_CONF/deplist.d"
	106
[3502]	107	# Debian 8 system e.g. use xorriso for UEFI support.
	108	# However, they use exactly the same command line parameters as mkisofs, so just
	109	# use it if it's available.
	110	ISO_CMD="/usr/bin/xorriso"
	111
	112	# Mandriva system e.g. use cdrkit, which uses genisoimage.
	113	# However, they use exactly the same command line parameters as mkisofs, so just
	114	# use it if it's available.
	115	if [ ! -x $ISO_CMD ]; then
[3505]	116	ISO_CMD="/usr/bin/genisoimage"
[3515]	117	# For compatibility with previous versions default to mkisofs
	118	if [ ! -x $ISO_CMD ]; then
	119	ISO_CMD="/usr/bin/mkisofs"
	120	fi
	121	if [ ! -x $ISO_CMD ]; then
	122	LogFile "NOTE: No CD image (ISO file) utility found"
	123	ISO_CMD = ""
	124	fi
	125	else
	126	ISO_CMD="/usr/bin/xorriso -as mkisofs"
[3502]	127	fi
	128
[3585]	129	ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi -V Mindi-Image -o $MINDI_CACHE/mindi.iso "
[925]	130
[3421]	131	# Mindi set this as default in case it's invoked alone
	132	BOOT_TYPE="BIOS"
	133	# and we also check whether we're UEFI or not.
	134	if [ -d "/sys/firmware/efi" ]; then
	135	BOOT_TYPE="UEFI"
[3429]	136	else
	137	# Find MBR in case of bootable USB device to build
	138	MBRFILE=/usr/lib/syslinux/mbr.bin
	139	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
	140	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
	141	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
	142	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
[3421]	143	fi
[3403]	144
[2880]	145	# Function to log on screen only
	146	LogScreen() {
[3368]	147	if [ -e /dev/stderr ] ; then
	148	echo -e "$1" >> /dev/stderr
	149	elif [ -e /usr/bin/logger ] ; then
	150	/usr/bin/logger -s $1
	151	fi
[2880]	152	}
[2685]	153
[2880]	154	# Function to log in log file only
	155	LogFile() {
	156
[3368]	157	echo -e "$1" >> $LOGFILE
	158	if [ _"$2" != _"" ]; then
[3403]	159	grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
[3432]	160	rm -f "$2"
[3368]	161	fi
[2880]	162	}
	163
	164	# Function to log in both screen and logfile
	165	LogAll() {
[3368]	166	LogScreen "$1"
	167	LogFile "$1" "$2"
[2880]	168	}
	169
[2963]	170	# Last function called before exiting
	171	# Parameter is exit code value
	172	# Should be declared here as used immediately below potentialy
	173	MindiExit() {
[3522]	174	LogFile "INFO: Mindi $MINDI_VERSION is exiting"
	175	LogFile "INFO: End date : `date`"
[2963]	176	if [ _"$MONDO_SHARE" != _"" ] ; then
	177	echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
[2995]	178	if [ -f $LOGFILE ]; then
	179	cat $LOGFILE >> /var/log/mondoarchive.log
	180	else
	181	echo "No LOGFILE available in that mindi run" >> /var/log/mondoarchive.log
	182	fi
[2963]	183	echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
	184	fi
[2880]	185
[2963]	186	cd /
	187	sync&
	188
	189	# Clean temporary files only when standalone mindi
	190	if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
	191	rm -Rf $MINDI_TMP
	192	fi
	193	exit $1
	194	}
	195
[2685]	196	Die() {
	197	local i
	198	if [ "$1" = "" ] ; then
[3149]	199	LogAll "FATAL ERROR"
[2685]	200	else
[3149]	201	LogAll "FATAL ERROR. $1"
[2685]	202	fi
	203	if [ _"$2" != _"" ]; then
[3403]	204	grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
[2685]	205	fi
	206	rm -f "$2"
	207
[3149]	208	LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
	209	LogAll "See http://www.mondorescue.org for more information."
	210	LogAll "WE CANNOT HELP unless you enclose that file.\n"
[2685]	211	MindiExit -1
	212	}
	213
[1485]	214	# Now we can create what we need
[2150]	215	MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
	216	if [ $? -ne 0 ]; then
	217	df $TMPDIR
	218	Die "Unable to create a temporary directory ! Check space on $TMPDIR"
	219	fi
[2153]	220	if [ _"$MINDI_TMP" = _"" ]; then
	221	Die "MINDI_TMP is empty, aborting"
	222	fi
	223	if [ _"$MINDI_TMP" = _"/" ]; then
	224	Die "MINDI_TMP is /, aborting"
	225	fi
[2150]	226	export MINDI_TMP
[940]	227
[747]	228	# ----------------------------------------------------------------------------
	229
	230
	231	AbortHere() {
[3546]	232	[ "$mountpoint" ] && sync && umount $mountpoint 2>> $LOGFILE
[747]	233	Die "Program is terminating in response to signal received from OS/user"
	234	}
	235
	236
	237	Aborted() {
	238	trap SIGHUP SIGTERM SIGTRAP SIGINT
[1880]	239	[ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindiimg $MINDI_CACHE/gz $MINDI_CACHE/mindi.iso
[747]	240	Die "User abort."
	241	}
	242
	243
	244	AddFileToCfgIfExists() {
	245	[ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
	246	}
	247
	248
	249	AddKeyboardMappingFile() {
	250	local mappath r included_list included_item i res ii sss
	251	mappath=$1
	252	KBDEPTH=$(($KBDEPTH+1))
	253	[ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
	254	if [ -e "$bigdir/$mappath" ] ; then
[3149]	255	LogFile "INFO: $mappath already added"
[747]	256	return
	257	elif [ -d "$bigdir/$mappath" ] ; then
	258	echo "Cannot add $mappath: it's a directory. Sorry."
	259	return
	260	fi
[3149]	261	LogFile "INFO: Added kbd map $mappath"
[747]	262	if [ ! -e "$mappath" ] ; then
[3149]	263	mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[747]	264	if [ ! -e "$mappath" ] ; then
[3149]	265	LogAll "WARNING: Cannot add $mappath: kbd map file not found"
[747]	266	return
	267	fi
	268	fi
	269
[3149]	270	tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log \| (cd "$bigdir" ; tar xf -) \|\| LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
[747]	271	if [ "`echo $mappath \| grep -F ".gz"`" ] ; then
[3023]	272	included_list=`gzip -dc $mappath \| grep -Fi include \| sed s/'"'//g \| cut -d' ' -f2`
[747]	273	else
[3023]	274	included_list=`grep -Fi include $mappath \| sed s/'"'//g \| cut -d' ' -f2`
[747]	275	fi
	276	for included_item in $included_list ; do
[925]	277	if [ ! -e "$included_item" ] ; then
[3149]	278	sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
[1764]	279	[ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
[925]	280	for ii in $sss ; do
[3546]	281	[ -e "$ii" ] && AddKeyboardMappingFile $ii
[925]	282	done
	283	else
	284	AddKeyboardMappingFile $included_item
	285	fi
[747]	286	done
	287	}
	288
	289
	290	CopyDependenciesToDirectory() {
[3403]	291	local outdir incoming counter d found tdir templog
[747]	292	outdir=$1
[3403]	293	templog=$MINDI_TMP/$$.log
[747]	294	mkdir -p $outdir
	295	incoming=`ReadLine`
[3522]	296	counter=$3
[3403]	297	> $templog
	298
[747]	299	while [ "$incoming" != "" ] ; do
[3522]	300	if [ "$3" = "1" ]; then
	301	counter=$(($counter+1))
	302	LogProgress $counter $2
	303	fi
[1526]	304	# Non absolute file names should not arrive till here => skipped
	305	if [ `echo "$incoming" \| cut -c1` != '/' ]; then
[3149]	306	LogAll "WARNING: Unable to handle $incoming"
[1526]	307	incoming=`ReadLine`
	308	continue
	309	fi
	310	# no parent directory of incoming should be a link, copy is not possible in that case
	311	d=`dirname "$incoming"`
	312	found="false"
	313	while [ $d != "/" -a $found = "false" ]; do
	314	[ -h "$d" ] && found="true"
	315	d=`dirname "$d"`
	316	done
[3166]	317	if [ -d "$incoming" -a ! -h "$incoming" ]; then
[3522]	318	find $incoming/* -maxdepth 0 2> /dev/null \| CopyDependenciesToDirectory $outdir 0 0
[1526]	319	elif [ -e "$incoming" ] && [ $found = "false" ]; then
[3075]	320	if [ ! -h "$incoming" ]; then
[3405]	321	tar cf - -C / $incoming 2> $templog \| (cd "$outdir" ; tar xf -) \|\| Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
[3075]	322	else
	323	tdir=`dirname "$incoming"`
	324	if [ ! -e "$outdir/$tdir" ]; then
	325	mkdir -p "$outdir/$tdir"
	326	fi
	327	cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
	328	fi
[1989]	329	# Only uncompress modules if not using udevd
	330	if [ "`echo "$incoming" \| grep "lib/modules/.\..o\.gz"`" != "" ] && [ "`ps auxww \| grep -v grep \| grep -qw udevd`" != "" ]; then
[3149]	331	gunzip -f $outdir/$incoming \|\| LogAll "WARNING: Cannot gunzip $outdir/$incoming"
[925]	332	fi
[3075]	333	[ -x "$outdir" ] && StripExecutable $outdir
[747]	334	fi
	335	incoming=`ReadLine`
	336	done
	337	}
	338
	339
	340	CountItemsIn() {
	341	local r
	342	r=0
	343	for q in $1 ; do
	344	r=$(($r+1))
	345	done
	346	echo $r
	347	}
	348
	349
	350	DropOptimizedLibraries() {
	351	local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
	352	filelist=$1
	353	outdir=$2
	354
	355	list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
	356	if [ "$list_of_optimized_libraries" = "" ] ; then
[859]	357	return 0
[747]	358	fi
	359	echo -en "Dropping i686-optimized libraries if appropriate"
	360	for optimized_lib_name in $list_of_optimized_libraries ; do
[859]	361	echo -en "."
	362	reason=""
[1483]	363	vanilla_lib_name=`echo "$optimized_lib_name" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
[859]	364	echo "$vanilla_lib_name" >> $filelist
[2963]	365	LogFile "INFO: Adding $vanilla_lib_name to filelist"
[859]	366	mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
	367	rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
[2168]	368
	369	# This may return multiple files
[3231]	370	for resolved in `mr-read-all-link $vanilla_lib_name`; do
[2963]	371	LogFile "INFO: Adding as deps $resolved to filelist"
[2168]	372	vanilla_resolved_name=`echo "$resolved" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
[3149]	373	if [ "$vanilla_resolved_name" != "$resolved" ]; then
	374	mkdir -p $outdir$resolved> /dev/null 2> /dev/null
	375	rmdir $outdir$resolved > /dev/null 2> /dev/null
	376	ln -sf $vanilla_resolved_name $outdir$resolved
	377	LogFile "INFO: Excluding deps $resolved"
	378	grep -Fvx "$resolved" "$filelist" > $filelist.tmp
	379	LogFile "INFO: Replacing it with $vanilla_resolved_name"
	380	echo "$vanilla_resolved_name" >> $filelist.tmp
	381	mv -f $filelist.tmp $filelist
	382	fi
[2168]	383	done
[747]	384	done
[925]	385	$AWK '{ print $1; }' $filelist \| sort -u > $filelist.tmp
[747]	386	mv -f $filelist.tmp $filelist
	387	echo -e "$DONE"
	388	}
	389
	390
	391	FindAndAddUserKeyboardMappingFile() {
	392	local r res mapfile mappath included_item included_list keyfile mp locale
[3149]	393	LogAll "INFO: Analyzing your keyboard's configuration."
[3231]	394	KEYDIR=/usr/lib/kbd
[747]	395	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
[3347]	396	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
	397	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
[3231]	398	[ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
[747]	399	if [ ! -e "$KEYDIR" ] ; then
[3149]	400	LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
[747]	401	return 0
[3569]	402	else
	403	LogFile "INFO: KEYDIR=$KEYDIR"
[747]	404	fi
	405	if [ -e "/etc/sysconfig/keyboard" ] ; then
[2963]	406	LogFile "INFO: Red Hat-style config detected."
[747]	407	keyfile=/etc/sysconfig/keyboard
[3257]	408	elif [ -e "/etc/vconsole.conf" ] ; then
	409	LogFile "INFO: New Fedora style config detected."
	410	keyfile=/etc/vconsole.conf
[747]	411	elif [ -e "/etc/rc.d/rc.keymap" ] ; then
[2963]	412	LogFile "INFO: Slackware-style config detected."
[747]	413	keyfile=/etc/rc.d/rc.keymap
	414	elif [ -e "/etc/rc.config" ] ; then
[2963]	415	LogFile "INFO: Debian-style config detected."
[747]	416	keyfile=/etc/rc.config
	417	elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
[2963]	418	LogFile "INFO: Debian-style config detected."
[747]	419	mkdir -p $bigdir/tmp
[3278]	420	echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
[747]	421	KBDEPTH=0
	422	mkdir -p $bigdir/etc/console
[963]	423	cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
[2864]	424	echo ""
[747]	425	echo -e "$DONE"
	426	return 0
[2828]	427	elif [ -e "/etc/console-setup/boottime.kmap.gz" ] \|\| [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
[2963]	428	LogFile "INFO: Ubuntu-style config detected."
[1713]	429	mkdir -p $bigdir/tmp
[2828]	430	if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
	431	kbdfile="/etc/console-setup/boottime.kmap.gz"
	432	else
	433	kbdfile="/etc/console-setup/cached.kmap.gz"
	434	fi
[3278]	435	echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
[1713]	436	KBDEPTH=0
	437	mkdir -p $bigdir/etc/console-setup
[2828]	438	cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
[2864]	439	echo ""
[1713]	440	echo -e "$DONE"
	441	return 0
[3595]	442	elif [ -e "/etc/default/keyboard" ]; then
	443	LogFile "INFO: New Debian-style config detected."
	444	keyfile=/etc/default/keyboard
[2744]	445	elif [ -e "/etc/rc.conf" ] ; then
[2963]	446	LogFile "INFO: ArchLinux config detected."
[2744]	447	keyfile=/etc/rc.conf
[1465]	448	elif [ -e "/etc/conf.d/keymaps" ] ; then
[2963]	449	LogFile "INFO: Gentoo-style config detected."
[1465]	450	keyfile=/etc/conf.d/keymaps
[3191]	451	elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
	452	LogFile "INFO: X11-style config detected."
	453	keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
[747]	454	else
[3149]	455	LogFile "Searching for rc.config ..."
[747]	456	keyfile=`find /etc -name rc.config \| head -n1`
	457	if [ "$keyfile" = "" ] \|\| [ ! -e "$keyfile" ] ; then
[3149]	458	LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
[747]	459	return
	460	else
[2963]	461	LogFile "INFO: Found $keyfile"
[747]	462	fi
	463	fi
	464	if [ ! -e "$KEYDIR/keymaps" ] ; then
[3149]	465	LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
[747]	466	return
	467	fi
[2963]	468	LogFile "INFO: keyfile=$keyfile"
[2999]	469	# For SLES we need to remove the .map.gz extension Cf #614
	470	locale=`grep -F KEYTABLE "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2 \| sed 's/.map.gz$//'`
[747]	471	[ ! "$locale" ] && locale=`grep '.map$' "$keyfile" \| sed 's/^.* //'` # Slackware
[3595]	472	[ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2` # Gentoo, ArchLinux & New fedora
[3191]	473	[ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" \| grep -v '^#' \| awk '{print $3}' \| tr -d '"'` # Fedora 19
[3595]	474	[ ! "$locale" ] && locale=`grep -Ei 'XkbLayout' "$keyfile" \| grep -v '^#' \| cut -d= -f2 \| tr -d '"'` # New Debian 8+
[2963]	475	LogFile "INFO: locale=$locale"
[1764]	476	#
	477	# Process the keymaps dir once for all
	478	# AddKeyboardMappingFile will use it recursively
	479	#
	480	find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
	481	mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep -F "/${locale}." \| grep -vx " #."`
	482	[ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[3571]	483	# For new distro such as RHEL 7 we need that additional search
	484	[ ! "$mp" ] && mp=`grep "xkb" $MINDI_TMP/keymaps.find \| grep -E "/$locale\." \| grep -vx " #."`
[747]	485	# If we have multiple keymaps then log it !!
[3149]	486	echo "$mp" \| grep -q " " >> $LOGFILE
[747]	487	if [ $? -eq 0 ]; then
[2963]	488	LogAll "WARNING: Multiple keymaps found: $mp"
	489	LogFile "INFO: The following one will be used"
[747]	490	fi
	491	for i in $mp ; do
	492	mappath=$i
	493	[ -e "$i" ] && [ ! -d "$i" ] && break
	494	done
	495	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[2958]	496	mappath=$(find / -wholename "/kbd/keymaps//$locale \| head -1")
[747]	497	fi
[2963]	498	LogFile "INFO: mappath = $mappath"
[747]	499	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[3149]	500	LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
[747]	501	return
	502	fi
[3535]	503	echo -en "INFO: Adding keyboard mapping tables"
[747]	504	mkdir -p $bigdir/tmp
[3278]	505	echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
[2055]	506	KBDEPTH=0
[747]	507	AddKeyboardMappingFile $mappath
[2864]	508	echo ""
[747]	509	echo -e "$DONE"
[1764]	510	rm -f $MINDI_TMP/keymaps.find
[747]	511	return 0
	512	}
	513
	514
[3241]	515	FindLdlinux32Binary() {
	516	LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
	517	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
	518	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
	519	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
	520	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
[3303]	521	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
	522	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
[3241]	523	#[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 \| grep -x "/.*/ldlinux.c32"`
	524	if [ ! -e "$LDLINUXC32" ]; then
	525	LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
	526	LDLINUXC32=/tmp/idoesnthopefullyexist
	527	else
	528	LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
	529	fi
	530	}
	531
	532
[2629]	533	FindMboot32Binary() {
	534	MBOOTC32=/usr/lib/syslinux/mboot.c32
	535	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
	536	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
	537	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
	538	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
[3303]	539	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
	540	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
[2629]	541	[ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 \| grep -x "/.*/mboot.c32"`
[2921]	542	[ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[2963]	543	LogFile "INFO: Found mboot.c32 at $MBOOTC32"
[2629]	544	}
	545
[3476]	546	FindLdlinuxe64Binary() {
	547	LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
	548	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
	549	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
	550	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
	551	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
	552	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
	553	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 \| grep -x "/.*/ldlinux.e64"`
	554	[ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
	555	LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
	556	}
	557
	558	FindSyslinux64EFI() {
	559	SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
	560	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
	561	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
	562	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
	563	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
	564	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
	565	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi \| grep -x "/.*64/syslinux.efi"`
[3491]	566	[ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[3476]	567	LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
	568	}
	569
[747]	570	FindIsolinuxBinary() {
	571	ISOLINUX=/usr/lib/isolinux.bin
	572	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
[1491]	573	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
[747]	574	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
	575	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
[1491]	576	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
[3304]	577	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
[1854]	578	[ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin \| grep -x "/.*/isolinux.bin"`
[2921]	579	[ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[2963]	580	LogFile "INFO: Found isolinux.bin at $ISOLINUX"
[747]	581	}
	582
	583
	584	GenerateGiantDependencyList() {
[3522]	585	local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item tempdepfile modres noof_lines lvmversion lvmresolved
[747]	586
[3522]	587	echo -en "INFO: Analyzing dependency requirements"
[747]	588	outfile=$1
[940]	589	tempfile=$MINDI_TMP/$$.txt
[747]	590	incoming=`ReadLine`
	591
	592	> $tempfile
	593	progress=0
	594	res=0
	595	noof_lines=$2
	596	while [ "$incoming" != "" ] ; do
[861]	597	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	598	incoming=`ReadLine`
	599	continue
	600	fi
	601	if [ "$incoming" = "LVMFILES:" ] ; then
	602	break
	603	fi
[747]	604	filelist=`GenerateListForFile "$incoming"`
	605	r=$?
[3149]	606	[ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
[747]	607	res=$(($res+$r))
[2963]	608	# LogFile "INFO: '$incoming' generates filelist '$filelist'"
[747]	609	for fname in $filelist ; do
[3321]	610	[ "$fname" != "" ] && echo "$fname" >> $tempfile
[747]	611	done
	612	progress=$(($progress+1))
[3149]	613	LogProgress $progress $noof_lines
[747]	614	incoming=`ReadLine`
	615	done
[861]	616	if [ "$incoming" = "LVMFILES:" ] ; then
	617	incoming=`ReadLine`
	618	lvmversion=""
	619	while [ "$incoming" != "" ] ; do
	620	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	621	incoming=`ReadLine`
	622	continue
	623	fi
	624	filelist=`GenerateListForFile "$incoming"`
	625	for tool in $filelist ; do
	626	lvmresolved=`readlink -f $tool`
[1342]	627	if [ "$tool" = "$lvmresolved" ]; then
[861]	628	echo "$tool" >> $tempfile
	629	elif echo "$lvmresolved" \| grep "lvmiopversion" &> /dev/null ; then
	630	if [ "$lvmversion" = "" ] ; then
	631	lvmversion=`$lvmresolved`
	632	echo "$lvmresolved" >> $tempfile
	633	fi
	634	toolstripped=`echo $tool \| $AWK -F / '{print $NF;}'`
[1342]	635	if [ "$lvmversion" = "200" ]; then
[861]	636	# pvdata and lvmcreate_initrd don't exist in LVM2
	637	case "$toolstripped" in
	638	"pvdata")
	639	continue
	640	;;
	641	"lvmcreate_initrd")
	642	continue
	643	;;
	644	esac
	645	fi
	646	toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
	647	if [ -e "$toolpath" ] ; then
	648	echo "$toolpath" >> $tempfile
	649	echo "$tool" >> $tempfile
	650	else
	651	toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
	652	fi
	653	if [ -e "$toolpath" ] ; then
	654	echo "$toolpath" >> $tempfile
	655	echo "$tool" >> $tempfile
	656	else
	657	echo "Where are your LVM-Tools? Couldn't find $tool"
	658	fi
	659	else
	660	echo "$tool" >> $tempfile
	661	fi
	662	done
	663	progress=$(($progress+1))
[3149]	664	LogProgress $progress $noof_lines
[861]	665	incoming=`ReadLine`
	666	done
[747]	667	fi
[3522]	668	echo -en "$DONE\nINFO: Making complete dependency list"
[747]	669
	670	tr -s '/' '/' < $tempfile \| sort -u > $tempfile.new
	671	mv -f $tempfile.new $tempfile
	672	> $outfile.pre
	673	progress=0
	674	noof_lines=`cat $tempfile \| wc -l`
[2963]	675	LogFile "---------------------------------"
	676	LogFile "List of dependencies: "
	677	LogFile "---------------------------------"
[747]	678	for fname in `cat $tempfile` ; do
[1876]	679	echo "$fname" \| tee -a $LOGFILE >> $outfile.pre
	680	LocateDeps $fname \| tee -a $LOGFILE >> $outfile.pre
[925]	681	progress=$(($progress+1))
[3149]	682	LogProgress $progress $noof_lines
[747]	683	done
[1684]	684	if [ _"$MONDO_SHARE" != _"" ]; then
[925]	685	mkdir -p $bigdir/tmp
[3172]	686	mkdir -p $bigdir/usr/bin
[940]	687	if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
[3149]	688	LogAll "\nINFO: Incorporating post-nuke tarball"
[3522]	689	(cd "$bigdir" ; tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log)
[747]	690	fi
[963]	691	if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
[925]	692	LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
	693	else
[3565]	694	LogAll "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
	695	LogAll " I bet you've got a spare copy of Mondo or Mindi floating around on your system."
	696	LogAll " If Mindi was called by Mondo then send a bug report."
	697	LogAll " It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
	698	LogAll " Finally, run Mindi again."
[925]	699	Die "Odd."
	700	fi
[3565]	701	cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE \|\| LogAll "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
[3270]	702	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3149]	703	LogAll "\nINFO: Incorporating Network-related settings"
[3278]	704	for r in NETFS-* ; do
[963]	705	cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE \|\| Die "Cannot copy $r - did you run out of disk space?"
[2963]	706	LogFile "INFO: Copying $r to ramdisk"
[925]	707	done
	708	fi
[747]	709	fi
[925]	710	tr ' ' '\n' < $outfile.pre \| tr -s '/' '/' \| grep -Fvx "" \| sort -u \| grep -Ev "/libX11\|/libXext\|/libXi\|/libgtk\|/libgdk" > $outfile
[747]	711	rm -f $tempfile $outfile.pre
	712	[ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" \|\| echo "\nFailed."
	713	return $res
	714	}
	715
	716
	717	GenerateListForFile() {
	718	local files_found loc fname incoming i res
	719	incoming="$1"
	720	files_found=""
	721	res=0
	722
	723	for fname in $incoming ; do
	724	files_found="$files_found `LocateFile $fname`"
	725	done
	726
	727	echo "$files_found" \| tr ' ' '\n' \| sort -u \| tr '\n' ' '
	728	}
	729
	730
	731	# Returns all disk devices which are part of a raid array
	732	GetAllRaidMembers() {
	733	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]device/ if(\$2) {print \$2}" < /etc/raidtab
	734	}
	735
	736
	737	GetFileSizeList() {
	738	local i
	739	for i in `find $1 -type d -o -print` ; do
	740	du -sk $i
	741	done
	742	}
	743
	744
[1230]	745	# Check kernel filesystem capabilites for accessing initrd image
[2429]	746	# Could be ext2 FS (old mode) or initramfs (new mode)
[1230]	747	#
	748	# Interface definition:
	749	# param #1: absolute path to kernel image
	750	GetInitrdFilesystemToUse() {
	751
	752	# interface test: make sure we have one parameter
	753	if [ $# -ne 1 ]; then
	754	Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
	755	fi
	756
	757	# interface parameters
	758	local lvKernelImage=$1
	759
	760	# local constants (filesystem magic strings)
	761	local lcMagicCramfs="<3>cramfs: wrong magic"
[2047]	762	local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
[2390]	763	local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
[3353]	764	local lcMagicInitfs="<6>checking if image is initramfs...\|[<]6[>]Unpacking initramfs...\|[<]6[>]Trying to unpack rootfs image as initramfs"
[1230]	765
	766	# local variables
	767	local lvOffset
	768	local lvScanRes
	769	local lvUseFilesystem
	770
	771	# say where we are.
[3111]	772	LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
[1230]	773
	774	# verify that file exists
	775	[ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
	776
[3111]	777	# Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
[1730]	778	file $lvKernelImage 2>&1 \| grep -q gzip
[1566]	779	if [ $? -eq 0 ]; then
[3111]	780	LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
	781	lvScanRes=`gzip -cd $lvKernelImage \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
	782	else
	783	LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
	784	# kernel is x86 boot sector in RHEL3/4 with embedded gzip content
	785	# get offet of gzip magic "1f8b0800" in file (for these older kernels)
	786	lvOffset=`od -vA n -t x1 $lvKernelImage \| tr -d '[:space:]' \| awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
	787	if [ $lvOffset -eq 0 ]; then
	788	LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
	789	lvScanRes=$lcMagicInitfs
[2393]	790	else
[3111]	791	lvOffset=`expr $lvOffset / 2`
	792	LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
	793	# scan again kernel image
	794	lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
[2393]	795	fi
[3111]	796	fi
[2393]	797
[3111]	798	# determine which filesystem to use for initrd image: ext2\|3fs, gzip'ed cpio (initramfs) or cramfs
	799	if [ `echo $lvScanRes \| grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
	800	lvUseFilesystem="ext2fs"
	801	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
	802	lvUseFilesystem="ext3fs"
	803	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
	804	lvUseFilesystem="initramfs"
	805	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
	806	lvUseFilesystem="cramfs"
[2429]	807	else
[3111]	808	# In that case, we are most probably after 2.6.30 and use the supported initramfs
[3181]	809	LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
	810	LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
	811	LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep initramfs"
[1230]	812	lvUseFilesystem="initramfs"
	813	fi
[3111]	814
[1230]	815	# say what we are using
[3111]	816	LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
[1230]	817
	818	# return file system to use
	819	echo "$lvUseFilesystem"
	820
	821	}
	822
[747]	823	# Searches members of raid device
	824	# $1: raid device (/dev/md...)
	825	GetRaidDevMembers() {
[2917]	826	if [ ! -f /etc/raidtab ]; then
	827	return
	828	fi
[747]	829	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
	830	}
	831
	832
	833	ListAllPartitions() {
	834	local res currline partition all_partitions ap_orig remaining i j
	835
[2070]	836	grep -Evx " #.\| none." $MY_FSTAB \| $AWK '/^\/dev\/[imhs]d\|\|^LABEL=\/\|^UUID=/ && !/\/fdd\|\/cdr\|\/zip\|\/floppy/ {print $1}'
[747]	837	[ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
[1824]	838	if [ -e "/vmfs/volumes" ]; then
	839	# For VMWare ESX 3 get the device names of these volumes
[2431]	840	vdf -P \| grep -E '/vmfs/volumes' \| $AWK '{print $1}'
[1824]	841	fi
[747]	842	return
	843	}
	844
	845
	846	ListKernelModulePaths() {
[2583]	847	local module_list module fname r kern
[1399]	848	module_list="$MODULES"
[1230]	849	# Remove unwanted modules from list
	850	for i in $DENY_MODS; do
	851	module_list=`echo ${module_list} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
	852	done
[747]	853	###
	854	### Sq-Modification ... Use kernelname for module search path if specified
	855	###
[3231]	856	if [ "${kernelname}" != "" ]
[747]	857	then
	858	kern=${kernelname}
	859	else
[2292]	860	kern="$KERVERRUN"
[747]	861	fi
[2292]	862	export KERVER=$kern
[747]	863	###
	864	### Sq-Mod End
	865	###
[3310]	866	# Get rid of duplicates
	867	for module in `echo $module_list \| tr ' ' '\n' \| sort -u` ; do
[747]	868	r=`find /lib/modules/$kern -type f \| grep "/${module}\..*o" \| tail -n1`
[2471]	869	if [ -z "$r" ]; then
	870	if [ "`echo "$MODULES" \| grep -w $module`" ]; then
	871	r="[live module file not found]"
	872	else
	873	r="[extra module file not found]"
	874	fi
[2583]	875	else
	876	[ -f "$r" ] && echo "$r"
[2471]	877	fi
[2963]	878	LogFile "INFO: module $module --> $r"
[747]	879	done
	880	find /lib/modules/$kern/modules.* -type f 2> /dev/null
	881	}
	882
[1784]	883	#
	884	# Critical function which computes all dependencies (dyn. lib.)
	885	# for a list of binaries
	886	#
[747]	887	LocateDeps() {
	888	local incoming fname deps
[1724]	889	incoming="$*"
[3231]	890	deps=""
	891
[747]	892	for fname in $incoming ; do
	893	if [ ! -e "$fname" ] ; then
[2995]	894	LogFile "WARNING: $fname does not exist; cannot be LDD'd."
[747]	895	if echo $fname \| grep lvm &> /dev/null ; then
[2963]	896	LogFile " This warning only affects you if you are using LVM."
[1399]	897	if echo "$MODULES" \| grep lvm &> /dev/null ; then
[3231]	898	LogFile " I think you are, so please take heed!"
[747]	899	else
[3231]	900	LogFile " I don't think you are, so don't worry about it."
[747]	901	fi
	902	fi
	903	else
[3231]	904	deps="$deps $fname"
[747]	905	fi
	906	done
[3231]	907	mr-read-all-link `mr-process-ldd $deps \| sort -u` \| sort -u
[747]	908	}
	909
[925]	910
[747]	911	LocateFile() {
[3231]	912	local i j path fname_to_find location output resolved tmp stub cache_id loclist
[747]	913	fname_to_find="$1"
[1526]	914	# It's an absolute path
[3231]	915	j=`echo "$fname_to_find" \| cut -c1`
	916	if [ _"$j" = _"/" ]; then
	917	dn=`dirname $fname_to_find`
	918	# We suppose that the link is already included, just add the new file
	919	if [ -h "$dn" ]; then
	920	newdn=`readlink -f $dn`
	921	bn=`basename $fname_to_find`
	922	output="$newdn/$bn"
	923	else
	924	output="$fname_to_find"
	925	fi
[860]	926	if [ -h "$output" ] ; then
[3231]	927	output="`mr-read-all-link $output` $output"
[860]	928	fi
[859]	929	echo "$output"
	930	return 0
[747]	931	fi
[1526]	932	# It's not an absolute path
[747]	933	output=""
[1526]	934	for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
	935	#for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
	936	[ -h "$path" ] && continue
	937	[ ! -e "$path/$fname_to_find" ] && continue
	938	output="$path/$fname_to_find $output"
	939	if [ -h "$path/$fname_to_find" ] ; then
[3231]	940	output="`mr-read-all-link $path/$fname_to_find` $output"
[1526]	941	fi
[747]	942	done
	943	if [ "$output" = "" ] ; then
[860]	944	return 1
[747]	945	fi
	946	echo "$output"
	947	return 0
	948	}
	949
[3149]	950	LogProgress() {
[3293]	951	local i progress modres noof_lines title
[3149]	952
	953	progress=$1
	954	noof_lines=$2
[3293]	955	title=$3
[747]	956
[3149]	957	i=$(($progress*100))
	958	if [ $noof_lines -ne 0 ]; then
	959	i=$(($i/$noof_lines))
	960	else
	961	i=0
	962	fi
[3293]	963
	964	if [ _"$MONDO_SHARE" != _"" ]; then
	965	echo "$title $i%"
	966	else
	967	echo -en "\r\t\t\t\t\t\t\t\t"
	968	echo -en "$i"
	969	echo -en "%"
	970	modres=$(($progress%4))
	971	[ "$modres" -eq "0" ] && echo -en "\t/"
	972	[ "$modres" -eq "1" ] && echo -en "\t-"
	973	[ "$modres" -eq "2" ] && echo -en "\t\\"
	974	[ "$modres" -eq "3" ] && echo -en "\t\|"
	975	fi
[3149]	976	}
	977
[3522]	978	# Called by MakeBootInitFile, to make /tmp/$MRCFG
[747]	979	MakeMondoConfigFile() {
	980	local outfile use_lzo use_comp use_star
	981	outfile=$1
	982	> $outfile
	983	[ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
	984	[ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
[1698]	985	[ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
[747]	986	[ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
	987	[ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
	988	[ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
	989	use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
[998]	990	use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
[3149]	991	use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
[747]	992	use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
	993	use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
	994	echo "use-lzo $use_lzo" >> $outfile
[998]	995	echo "use-gzip $use_gzip" >> $outfile
[747]	996	echo "use-star $use_star" >> $outfile
[3149]	997	echo "use-lzma $use_lzma" >> $outfile
[747]	998	echo "use-comp $use_comp" >> $outfile
[3397]	999	echo "boot-type $BOOT_TYPE" >> $outfile
[747]	1000	echo "datestamp `date`" >> $outfile
	1001	[ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
[940]	1002	AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
	1003	AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
	1004	AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
[3278]	1005	AddFileToCfgIfExists $MINDI_TMP/ISO-DIR iso-dir $outfile
[940]	1006	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
	1007	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
[3278]	1008	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER bootloader.ver $outfile
[940]	1009	AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
	1010	AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
	1011	AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
[3278]	1012	AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
	1013	AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
	1014	AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
	1015
[3270]	1016	# Deal with network configuration in a portable way
	1017	if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
	1018	mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
	1019	fi
[747]	1020	}
	1021
[2618]	1022	# Get PV's for an LV
	1023	GetPVsForLV() {
[3368]	1024	if [ -n "$1" ]; then
	1025	vg=`$LVMCMD lvdisplay $1 2>/dev/null \|awk '/VG Name/{print $NF;exit}'`
	1026	if [ -z "$vg" ]; then
	1027	return
	1028	fi
	1029	$LVMCMD vgdisplay -v $vg 2>/dev/null \| awk '/PV Name/{print $NF}'
	1030	fi
[2618]	1031	}
[747]	1032
[2618]	1033
[747]	1034	MakeMountlist() {
[2907]	1035	local mountlist all_partitions current_partition \
[747]	1036	partition_size partition_format outstring partition_number \
	1037	partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
[2013]	1038	absolute_partition old_partition_fmt current_lvolume uname skip
[747]	1039
[3149]	1040	LogFile "------------------------------------"
[3522]	1041	LogFile "INFO: Your raw fstab file looks like this:"
[2963]	1042	LogFile "------------------------------------"
[747]	1043	cat $MY_FSTAB >> $LOGFILE
[3149]	1044	LogAll "-----------------------------------"
[3522]	1045	LogAll "INFO: Your mountlist will look like this:"
[3149]	1046	LogAll "-----------------------------------"
[747]	1047
[2907]	1048	# mountlist(OUT)
[747]	1049	mountlist=$1
	1050
	1051	# NB: partition = device
	1052	# NB: mountpt = where the device is mounted
	1053
	1054	[ -e "$MY_FSTAB" ] \|\| Die "Cannot find your fstab file ($MY_FSTAB)"
	1055
[3565]	1056	[ "$mountlist" != "" ] && [ "$mountlist" != "/" ] && rm -Rf $mountlist
[747]	1057	> $mountlist
	1058	all_partitions=""
	1059
	1060	if [ $LVM != "false" ]; then
[3499]	1061	LogFile "INFO: Analyzing LVM..."
[968]	1062	$MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
[971]	1063	if [ $? -ne 0 ]; then
[963]	1064	LVM="false"
	1065	fi
[2536]	1066	# Excluded LVs and GVs are not reported here
[2424]	1067	all_partitions=`cat $MINDI_TMP/lvm.res \| grep -F ">>>" \| cut -d' ' -f2-`
[747]	1068	fi
	1069	all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
	1070	for i in $IMAGE_DEVS ; do
	1071	mount \| grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
	1072	done
	1073	[ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" \| tr ' ' '\n' \| sort -u \| tr '\n ' ' '`"
[3149]	1074	printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID \| tee -a $LOGFILE
	1075	printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------ ------- ---------- \| tee -a $LOGFILE
[3028]	1076	useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
[747]	1077	for c_p in $all_partitions ; do
[2917]	1078	# Skip fd/cd devices, network FS, cifs
[2452]	1079	[ "`echo "$useless_dev" \| grep -F "$c_p"`" != "" ] \|\| [ "`echo "$c_p" \| grep ":"`" != "" ] \|\| [ "`echo "$c_p" \| grep -E "^//"`" != "" ]&& continue
[747]	1080	[ "`echo "$c_p" \| grep -x "/dev/cdroms.*"`" ] && continue
	1081	if [ -h "$c_p" ] && [ "`echo "$c_p" \| grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/md"`" = "" ] ; then
[861]	1082	current_partition=`readlink -f $c_p`
[3046]	1083	if [ "`echo "$current_partition" \| grep -F "/dev/mapper"`" != "" ]; then
	1084	current_partition="$c_p"
	1085	elif [ "`echo $current_partition \| grep -E '^/dev/dm-'`" ]; then
[3059]	1086	# For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
[3066]	1087	current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
[3046]	1088	fi
[747]	1089	[ "`echo "$useless_dev" \| grep -F "$current_partition"`" ] && continue
	1090	else
	1091	current_partition="$c_p"
	1092	fi
	1093	[ "$c_p" = "none" ] && continue
	1094	redhat_label=""
[1831]	1095	label=""
[957]	1096	uuid=""
[861]	1097	absolute_partition=`readlink -f $c_p`
[2965]	1098	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$current_partition" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[747]	1099
[1986]	1100	# set default in case we dont't find it
	1101	str_to_find_fmt_with=$current_partition
	1102
[747]	1103	# This part tries to retrieve the correct device from a LABEL line in /etc/fstab
	1104	# current_partition contains only first column of /etc/fstab
[2965]	1105	if [ "`echo "$current_partition" \| grep -i "LABEL="`" != "" ]; then
[980]	1106	redhat_label=`echo "$current_partition" \| cut -d'=' -f2`
[747]	1107	actual_dev=""
[853]	1108
	1109	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1110	if [ -x "/sbin/findfs" ]; then
[2847]	1111	actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
[853]	1112	fi
[747]	1113
[853]	1114	# 2nd try : blkid, the good way for all LABEL except swap
	1115	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[2965]	1116	actual_dev=`/sbin/blkid \| grep "$redhat_label" \| grep LABEL= \| cut -d':' -f1`
[747]	1117	# For LVM FS it will give a /dev/dm-# which should then be converted
[748]	1118	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1119	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1120	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[747]	1121	for dev in `ls /dev/mapper/*`; do
[963]	1122	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1123	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[747]	1124	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1125	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[747]	1126	break
	1127	fi
	1128	done
	1129	fi
	1130	fi
	1131
[853]	1132	# 3rd try, which works on a standard partition (ext2/3), but not on swap
[747]	1133	# For LVM gives a /dev/mapper entry
	1134	if [ "x$actual_dev" = "x" ]; then
[2965]	1135	actual_dev=`/bin/mount -l \| grep "\[$redhat_label\]" \| cut -d' ' -f1`
[747]	1136	fi
	1137
[853]	1138	# 4th try, with vol_id
[747]	1139	# SWAP only
	1140	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[2965]	1141	list_swaps=`cat /proc/swaps \| grep "/dev/" \| $AWK '{ print $1 }' `
[747]	1142	for dev_swap in $list_swaps ; do
[2965]	1143	dev_exists=`/sbin/vol_id $dev_swap \| grep "$redhat_label"`
[747]	1144	if [ "x$dev_exists" != "x" ]; then
	1145	actual_dev=$dev_swap
	1146	break;
	1147	fi
	1148	done
	1149	fi
	1150
[853]	1151	# 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
[789]	1152	# LABEL=SW-cciss/c0d0p3 (RDP)
[853]	1153	# or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
[747]	1154	# SWAP only
[2965]	1155	if [ "x$actual_dev" = "x" -a _"`echo $current_partition \| grep -iE 'LABEL=SWAP\|LABEL=SW-'`" != _"" ]; then
[2013]	1156	skip=""
[2292]	1157	uname=$KERVERRUN
[2013]	1158	[ "`echo $uname \| grep "2.4.[0-9]"`" != "" ] && skip=16
	1159	# 2.6.12 needs 16 (FC3)
	1160	[ "`echo $uname \| grep "2.6.[0-1]"`" != "" ] && skip=16
	1161	# 2.6.19 and upper needs 1052
	1162	[ "`echo $uname \| grep "2.6.19"`" != "" ] && skip=1052
	1163	[ "`echo $uname \| grep "2.6.[2-9]"`" != "" ] && skip=1052
[2892]	1164	[ "`echo $uname \| grep "3.[0-9].[0-9]"`" != "" ] && skip=1052
[2013]	1165	if [ $skip = "" ]; then
	1166	Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
	1167	fi
[853]	1168	for try_dev in `tail +2 /proc/swaps \| cut -d' ' -f1`
	1169	do
	1170	# Location of the swap label for kernel 2.6
[2013]	1171	try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
[853]	1172	if [ "x$try_dev_label" = "x$redhat_label" ]; then
[855]	1173	actual_dev=$try_dev
[853]	1174	fi
	1175	done
[747]	1176	fi
[1008]	1177
	1178	# Check if one of all those tries has known success
	1179	if [ "x$actual_dev" != "x" ]; then
	1180	current_partition=$actual_dev
	1181	else
[1885]	1182	Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
[1008]	1183	fi
[957]	1184	# This part tries to retrieve the correct device from a UUID line in /etc/fstab
	1185	# current_partition contains only first column of /etc/fstab
[2965]	1186	elif [ "`echo "$current_partition" \| grep -i "UUID="`" != "" ]; then
[980]	1187	uuid=`echo "$current_partition" \| cut -d'=' -f2`
[957]	1188	actual_dev=""
	1189
	1190	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1191	if [ -x "/sbin/findfs" ]; then
	1192	actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
	1193	fi
	1194
[1531]	1195	# 2nd try : blkid, the good way for all UUID except swap
[957]	1196	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[2965]	1197	actual_dev=`/sbin/blkid \| grep "$uuid" \| grep UUID= \| cut -d':' -f1`
[957]	1198	# For LVM FS it will give a /dev/dm-# which should then be converted
	1199	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1200	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1201	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[957]	1202	for dev in `ls /dev/mapper/*`; do
[963]	1203	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1204	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[957]	1205	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1206	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[957]	1207	break
	1208	fi
	1209	done
	1210	fi
	1211	fi
	1212
	1213	# 3th try, with vol_id
	1214	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[2965]	1215	list_dev=`mount \| grep -E '^/' \| $AWK '{ print $1 }' `
[957]	1216	for dev in $list_dev ; do
[2965]	1217	dev_exists=`/sbin/vol_id $dev \| grep "$uuid"`
[957]	1218	if [ "x$dev_exists" != "x" ]; then
	1219	actual_dev=$dev
	1220	break;
	1221	fi
	1222	done
	1223	fi
	1224
[1531]	1225	# 4th try, with dumpuuid (VMWare only ?) for swap
	1226	if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
[2965]	1227	list_dev=`cat /proc/swaps \| grep -E '^/' \| $AWK '{ print $1 }' `
[1531]	1228	for dev in $list_dev ; do
[2965]	1229	dev_exists=`/sbin/dumpuuid $dev \| grep "$uuid"`
[1531]	1230	if [ "x$dev_exists" != "x" ]; then
	1231	actual_dev=$dev
	1232	break;
	1233	fi
	1234	done
	1235	fi
	1236
[747]	1237	# Check if one of all those tries has known success
	1238	if [ "x$actual_dev" != "x" ]; then
	1239	current_partition=$actual_dev
	1240	else
[2069]	1241	Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs\|blkid\|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
[747]	1242	fi
	1243	else
[1863]	1244	# Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
	1245	# they use symlinks in fstab unrelated to what is shown in mount !
	1246	if [ _"$partition_mountpt" = _"" ]; then
[1986]	1247	# set default in case we dont't find it
[2965]	1248	for tmpp in `tr -s '\t' ' ' < $MY_FSTAB \| grep -Ev "^#" \| $AWK '{print $1}'`; do
[3084]	1249	if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
[1863]	1250	str_to_find_fmt_with=$tmpp
[2965]	1251	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$tmpp" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[1864]	1252	break;
[1863]	1253	fi
	1254	done
	1255	fi
[747]	1256	fi
	1257
[3084]	1258	# Detects noauto partitions not mounted and exclude them
	1259	partition_option=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$str_to_find_fmt_with" \| grep -vx " #." \| $AWK '{print $4}' \| head -n1`
	1260	if [ "`echo "$partition_option" \| grep -i noauto`" != "" ] && [ "`mount \| grep -w "$partition_mountpt"`" = "" ] ; then
	1261	LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
	1262	continue
	1263	fi
	1264	# Detects bind partitions and exclude them
	1265	if [ "`echo "$partition_option" \| grep -iw bind`" != "" ]; then
	1266	LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
	1267	continue
	1268	fi
	1269
[2566]	1270	# Look for devices which have to be excluded
	1271	skip=0
	1272	if [ "$MINDI_EXCLUDE_DEVS" ] ; then
[2568]	1273	l=""
[3231]	1274	list_of_devices="`mr-read-all-link $current_partition`"
[2568]	1275	for d in $list_of_devices; do
[2579]	1276	l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
[2568]	1277	done
[2618]	1278
	1279	# Remove PVs from LVs excluded
	1280	l="$l `GetPVsForLV $current_partition`"
	1281
	1282	# We want a single unique list
[3522]	1283	list_of_devices="`echo $l \| tr ' ' '\n' \| sort -u`"
[2618]	1284
[2854]	1285	for d in `echo $MINDI_EXCLUDE_DEVS \| sed 's/\|/ /g'`; do
[2568]	1286	if [ "`echo " $list_of_devices " \| grep " $d"`" != "" ]; then
[2963]	1287	LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
[2566]	1288	skip=1
	1289	continue
	1290	fi
	1291	done
	1292	fi
	1293	if [ $skip -eq 1 ]; then
	1294	continue
	1295	fi
	1296
[747]	1297	partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
[3028]	1298	# Detects iso9660 ISO images and exclude them
	1299	if [ "`echo "$partition_format" \| grep -iw iso9660`" != "" ]; then
[3064]	1300	LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
[3028]	1301	continue
	1302	fi
[747]	1303	# Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
	1304	# for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
	1305	# the former is then a link to the latter, so we test whether
	1306	# $current_partition is actually such a link or not and set
[755]	1307	# $current_lvolume accordingly. On Debian you may find more than one answer
	1308	# so we remove the one corresponding to /dev/.static
	1309	# On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
	1310	# principle is the same and we need to find the link to it as well.
	1311	# Note that $current_lvolume may well be an
[747]	1312	# ordinary device. It is just to make sure that we feed the right value
	1313	# into any of the LVM tools if possible.
	1314
[3064]	1315	current_lvolume="$current_partition"
[763]	1316	if [ $LVM = "v2" ] && [ "`echo $current_partition \| grep -E '^/dev/mapper/'`" ]; then
[755]	1317	# .static dir are a Debian specificity
[763]	1318	current_lvolume="`find /dev -lname "$current_partition" \| grep -Ev '^/dev/\.static/'`"
[755]	1319	echo $current_lvolume \| grep -q ' '
[784]	1320	if [ $? -eq 0 ]; then
[2963]	1321	LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
[755]	1322	fi
[2072]	1323	# if it's not found, it may well be a real device such as a multipath one
	1324	# /dev/mapper/mpath... Thus we revert the situation so that next test succeed
	1325	if [ _"$current_lvolume" = _"" ]; then
	1326	current_lvolume="$current_partition"
	1327	fi
[747]	1328	fi
	1329	#
	1330	# End of LVM device style variation code (other than $current_lvolume).
	1331
[745]	1332	if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
	1333	# Size computed via LVM not directly
[747]	1334	partition_size="lvm"
	1335	else
	1336	[ "`echo "$current_partition" \| grep "[0-9]"`" = "" ] && continue
	1337	[ "`echo "$current_partition" \| grep -c "^/"`" -ne "1" ] && continue
	1338	if [ "$partition_format" = "swap" ] \|\| [ "$partition_mountpt" = "swap" ] ; then
[2947]	1339	# Skip swap files
	1340	[ "`echo "$current_partition" \| grep -E "^/dev"`" = "" ] && continue
[2919]	1341	partition_size=`grep -Fv "Priority" /proc/swaps \| tr -s '\t' ' ' \| grep -F "$current_partition " \| $AWK '{print $3}'`
[747]	1342	[ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
[3368]	1343	[ "$partition_format" != "swap" ] && partition_format="swap"
[747]	1344	if [ "$partition_size" = "" ] ; then
[3368]	1345	totalsize=0
	1346	items=0
	1347	for i in `tr -s ' ' '\t' < /proc/swaps \| grep -Fv "Filename" \| cut -f3` ; do
[747]	1348	totalsize=$(($totalsize+$i))
	1349	items=$(($items+1))
[3368]	1350	done
	1351	[ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) \|\| partition_size=0
	1352	[ "$partition_size" -lt "125000" ] && partition_size=125000
	1353	LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
[747]	1354	fi
[2947]	1355	else
	1356	partition_size=`SizeOfPartition $current_partition`
[747]	1357	fi
	1358	fi
	1359	[ "$partition_mountpt" = "swap" ] && partition_format="swap"
	1360	[ "$partition_format" = "swap" ] && partition_mountpt="swap"
	1361	if [ "$partition_mountpt" = "" ] ; then
	1362	if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
	1363	if [ "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
	1364	partition_mountpt="raid"
	1365	partition_format="raid"
	1366	else
	1367	partition_mountpt="lvm"
	1368	partition_format="lvm"
	1369	fi
	1370	fi
	1371	fi
	1372	psz=$partition_size
[2963]	1373	LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
[747]	1374	[ "$psz" != "lvm" ] && psz=$(($psz/1024))
	1375	if [ "`echo " $IMAGE_DEVS " \| grep -F " $current_partition "`" != "" ] ; then
	1376	partition_mountpt="image"
	1377	old_partition_fmt=$partition_format
	1378	partition_format="`$FDISK -l 2>> $LOGFILE \| tr '*' ' ' \| tr '+' ' ' \| tr -s ' ' '\t' \| grep -w "$absolute_partition" \| cut -f5`"
	1379	partition_size=$(($partition_size+1)); # just in case
	1380	if [ "$partition_format" = "Linux" ] ; then
[2963]	1381	LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
	1382	LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
[747]	1383	partition_format=$old_partition_fmt
	1384	fi
	1385	fi
[2566]	1386
[747]	1387	if [ ! "$partition_mountpt" ] ; then
[2963]	1388	LogFile "------- $FDISK -l $qq log ------------"
[1883]	1389	for qq in "" `find /dev/ida/cd ! -name 'p' 2> /dev/null`; do
[747]	1390	partition_format=`$FDISK -l $qq 2>> $LOGFILE \| grep -w "$c_p" \| sed 's/12/\|/' \| tr -s '\t' ' ' \| cut -d'\|' -f2 \| cut -d' ' -f2-9`
	1391	[ "$partition_format" ] && break
	1392	done
[2963]	1393	LogFile "------- $FDISK log end ------------"
[747]	1394	if [ "$partition_format" = "Compaq diagnostics" ] ; then
	1395	partition_format="compaq"
	1396	elif [ ! "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
[3149]	1397	LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
[747]	1398	continue
	1399	fi
	1400	fi
[1755]	1401	if [ "$redhat_label" ]; then
	1402	label="$redhat_label"
[1756]	1403	elif [ "$uuid" ]; then
[1755]	1404	label="$uuid"
	1405	fi
[3330]	1406
	1407	# On RHEL 7 they use UUID concretely, even when not mentioned in fstab
	1408	# in order to mount the root part e.g. in grub.
	1409	# One way to solve this is to add the UUID now, if there wasn't one so it's
	1410	# restored correctly
	1411	if [ _"$label" = _"" ]; then
	1412	label=`blkid $current_partition \| perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
	1413	fi
	1414
[747]	1415	partition_format="`echo "$partition_format" \| cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
[963]	1416	[ "$partition_format" = "auto" ] && partition_format="`mount \| grep -w $current_partition \| $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
[3149]	1417	unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
[747]	1418	if [ "$current_partition" = "" ] ; then
[2963]	1419	LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
[747]	1420	elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
	1421	if [ "`grep -F device /etc/raidtab 2>/dev/null \| grep -F $current_partition`" ] ; then
	1422	partition_mountpt=raid
	1423	partition_format=raid
[3149]	1424	printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
[1755]	1425	printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1426	else
[2963]	1427	LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
[747]	1428	fi
	1429	elif [ "$partition_format" = "" ] ; then
[2963]	1430	LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
[747]	1431	elif [ "$partition_size" = "" ] ; then
[2963]	1432	LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
[747]	1433	elif [ "$partition_mountpt" = "/proc" ] \|\| [ "$partition_mountpt" = "/dev/pts" ] ; then
	1434	continue
	1435	else
	1436	if [ "$partition_format" = "dos" ] \|\| [ "$partition_format" = "msdos" ] ; then
[3522]	1437	LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
[747]	1438	partition_format="vfat"
	1439	fi
[3149]	1440	printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
[1755]	1441	printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1442	fi
	1443	done
[3149]	1444	LogAll "-----------------------------------"
[747]	1445	}
	1446
[2432]	1447	CheckMountlist() {
	1448	local file=$1
	1449	# Coherency verification
[2529]	1450	ML01=`cat $file \| wc -l`
[2995]	1451	ML02=`grep -vE ' lvm \| raid \| swap ' $file \| wc -l`
[2432]	1452	ML1=`$AWK '{print $1}' $file \| sort -u \| wc -l`
[3024]	1453	ML2=`grep -vE ' lvm \| raid \| swap ' $file \| $AWK '{print $2}' \| sort -u \| wc -l`
[2529]	1454	if [ "$ML01" -ne "$ML1" ]; then
[2963]	1455	LogFile "--------------------------------------------"
[3081]	1456	LogAll "WARNING: Duplicate device entry in mountlist"
[2963]	1457	LogFile "--------------------------------------------"
[2432]	1458	fi
[2529]	1459	if [ "$ML02" -ne "$ML2" ]; then
[2963]	1460	LogFile "--------------------------------------------"
	1461	LogAll "WARNING: Duplicate mountpoint entry in mountlist"
	1462	LogFile "------------------------------------------------"
[2432]	1463	fi
	1464	}
[747]	1465
[3476]	1466
[3522]	1467	MakeISOErrors() {
[3421]	1468
[3522]	1469	LogFile "----------- $ISO_CMD's errors --------------"
	1470	LogAll "$ISO_CMD returned the following errors:"
	1471	cat $MINDI_TMP/mkisofs.log \| tee -a $LOGFILE
	1472	LogAll "ERROR: Failed to create ISO image."
	1473	}
[3499]	1474
[3532]	1475	MakeISO() {
	1476
[3535]	1477	LogAll "INFO: Invoking $CMD ."
[3532]	1478	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
	1479	if [ $? -ne 0 ] ; then
	1480	if [ "$BOOT_TYPE" = "UEFI" ]; then
	1481	CMD=`echo $CMD \| perl -p -e 's\|--efi-boot \|-eltorito-platform 0xEF -eltorito-boot \|; s\|-efi-boot \|-eltorito-platform 0xEF -eltorito-boot \|;'`
	1482	LogAll "INFO: Invoking instead $CMD"
	1483	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
	1484	if [ $? -eq 0 ] ; then
	1485	LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
	1486	else
	1487	MakeISOErrors
	1488	fi
	1489	else
	1490	MakeISOErrors
	1491	fi
	1492	else
	1493	LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
	1494	fi
	1495	rm -f $MINDI_TMP/mkisofs.log
	1496	}
	1497
[3522]	1498	MakeBootableDevice() {
[3499]	1499
[3522]	1500	local target tbc retval part size mount_opt
	1501
	1502	target="$1"
	1503
	1504	rm -Rf $MINDI_TMP/target
	1505	mkdir -p $MINDI_TMP/target/{images,archives,tmp}
	1506
	1507	LogAll "INFO: Copying $MINDI_CACHE/*.gz to $MINDI_TMP/target/images"
	1508	cp -f $MINDI_CACHE/*.gz $MINDI_TMP/target/images 2>> $LOGFILE \|\| LogAll "WARNING: MakeBootableDevice: Cannot copy files to $MINDI_TMP/target/images"
	1509	for i in memdisk memtest.bin memtest.img ; do
	1510	j=$MINDI_LIB/$i
	1511	k=$MINDI_TMP/target
	1512	if [ -e "$j" ] ; then
	1513	LogAll "INFO: Copying $j to $k"
	1514	cp -f $j $k 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $k"
	1515	cp -f $j $MINDI_TMP 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $MINDI_TMP"
	1516	if [ _"$MONDO_SHARE" != _"" ]; then
	1517	cp -f $j $MONDO_ROOT 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $MONDO_ROOT"
[3499]	1518	fi
[3522]	1519	fi
	1520	done
[3499]	1521
[3522]	1522	retval=0
	1523	LogAll "INFO: Copying $kernelpath to $MINDI_TMP/target/vmlinuz"
	1524	cp $kernelpath $MINDI_TMP/target/vmlinuz 2>> $LOGFILE
[3528]	1525	if [ $? -ne 0 ] ; then
[3522]	1526	LogAll "ERROR: Failed to copy $kernelpath $MINDI_TMP/target/"
	1527	retval=$(($retval+1))
	1528	fi
	1529	LogAll "INFO: Copying $MINDI_TMP/initrd.img to $MINDI_TMP/target/initrd.img"
	1530	cp $MINDI_TMP/initrd.img $MINDI_TMP/target/ 2>> $LOGFILE
[3528]	1531	if [ $? -ne 0 ] ; then
[3522]	1532	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MINDI_TMP/target/"
	1533	retval=$(($retval+1))
	1534	fi
[3421]	1535
[3522]	1536	# copy boot stuff now generated in PrepareDataDiskImage
	1537	if [ "$BOOT_TYPE" = "UEFI" ]; then
	1538	(cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
	1539	tbc="EFI"
[3528]	1540	# Also prepare a BIOS compatible boot
	1541	if [ "$target" = "ISO" ]; then
	1542	cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
	1543	fi
[3522]	1544	else
	1545	(cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
	1546	tbc="syslinux"
	1547	if [ -f "$MINDI_TMP/target/$tbc/syslinux.cfg" ]; then
	1548	LogFile "----------- syslinux's conf --------------"
	1549	cat $MINDI_TMP/target/$tbc/syslinux.cfg >> $LOGFILE
	1550	LogFile "------------------------------------------"
	1551	fi
	1552	if [ "$target" = "ISO" ]; then
	1553	cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
[3528]	1554	if [ $? -ne 0 ] ; then
[3522]	1555	LogAll "ERROR: Failed to copy $ISOLINUX to $MINDI_TMP/target/$tbc"
	1556	retval=$(($retval+1))
[3476]	1557	fi
[3522]	1558	fi
	1559	fi
[3476]	1560
[3522]	1561	if [ "$ARCH" != "ia64" ] ; then
	1562	if [ $KERNEL_IS_XEN = "yes" ]; then
	1563	FindMboot32Binary
	1564	cp $xenkernelpath $MINDI_TMP/target/xen.gz 2>> $LOGFILE
[3528]	1565	if [ $? -ne 0 ] ; then
[3522]	1566	LogAll "ERROR: Failed to copy $xenkernelpath to $MINDI_TMP/target/"
	1567	retval=$(($retval+1))
[1885]	1568	fi
[3522]	1569	cp $MBOOTC32 $MINDI_TMP/target/$tbc/mboot.c32 2>> $LOGFILE
[3528]	1570	if [ $? -ne 0 ] ; then
[3522]	1571	LogAll "ERROR: Failed to copy $MBOOTC32 to $MINDI_TMP/target/$tbc"
	1572	retval=$(($retval+1))
	1573	fi
[747]	1574	fi
[3522]	1575	fi
[3499]	1576
[3522]	1577	MakeMessageFile $MINDI_TMP/target/$tbc \| cut -c1-80 > $MINDI_TMP/target/$tbc/message.txt
	1578
	1579	if [ _"$MONDO_SHARE" != _"" ]; then
	1580	cp -rf $MINDI_TMP/target/$tbc $MONDO_ROOT 2>> $LOGFILE
[3528]	1581	if [ $? -ne 0 ] ; then
[3522]	1582	LogAll "ERROR: Failed to copy $MINDI_TMP/target/$tbc to $MONDO_ROOT"
	1583	LogAll " Please check the target directory."
	1584	retval=$(($retval+1))
	1585	fi
	1586	if [ $KERNEL_IS_XEN = "yes" ]; then
	1587	cp -f $MINDI_TMP/target/xen.gz $MONDO_ROOT 2>> $LOGFILE
[3528]	1588	if [ $? -ne 0 ] ; then
[3522]	1589	LogAll "ERROR: Failed to copy $MINDI_TMP/target/xen.gz to $MONDO_ROOT"
	1590	LogAll " Please check the target directory."
	1591	retval=$(($retval+1))
[3476]	1592	fi
[747]	1593	fi
[3522]	1594	cp -f $MONDO_SHARE/autorun $MINDI_TMP/target 2>> $LOGFILE
[3527]	1595	cp -f $MINDI_TMP/target/vmlinuz $MONDO_ROOT 2>> $LOGFILE
[3528]	1596	if [ $? -ne 0 ] ; then
[3527]	1597	LogAll "ERROR: Failed to copy $MINDI_TMP/vmlinuz to $MONDO_ROOT"
	1598	LogAll " Please check the target directory."
	1599	retval=$(($retval+1))
	1600	fi
	1601	cp -f $MINDI_TMP/target/initrd.img $MONDO_ROOT 2>> $LOGFILE
[3528]	1602	if [ $? -ne 0 ] ; then
[3527]	1603	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MONDO_ROOT"
	1604	LogAll " Please check the target directory."
	1605	retval=$(($retval+1))
	1606	fi
[3522]	1607	fi
[747]	1608
[3522]	1609	if [ -f "$MINDI_TMP/$MRCFG" ]; then
	1610	cp -f $MINDI_TMP/$MRCFG $MINDI_TMP/target/tmp
	1611	fi
[747]	1612
[3522]	1613	LogFile "----------- target dir content -----------"
	1614	LogFile "------------------------------------------"
	1615	ls -lR $MINDI_TMP/target >> $LOGFILE
	1616	LogFile "------------------------------------------"
	1617	LogFile "----------- target dir sizes -------------"
	1618	du -sk $MINDI_TMP/target/* >> $LOGFILE
	1619	LogFile "------------------------------------------"
[3476]	1620
[3522]	1621	if [ "$retval" -ne "0" ] ; then
	1622	LogFile "--------------------------------"
	1623	LogFile "INFO: Size of $MINDI_TMP/target:"
	1624	du -sk $MINDI_TMP/target/* >> $LOGFILE
	1625	LogFile "--------------------------------"
	1626	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
[3546]	1627	sync
[3522]	1628	umount $MINDI_TMP/target
	1629	LogAll "ERROR: Problems while creating boot media."
	1630	LogAll " Please unload some of your modules and try again."
	1631	Die " Try to increase EXTRA_SPACE in $MINDI_CONFIG"
	1632	fi
[3476]	1633
[3522]	1634	mkdir -p $MINDI_TMP/mpt
[1684]	1635
[3522]	1636	if [ "$target" = "USB" ]; then
	1637	LogAll "INFO: Transforming $USBDEVICE in a Bootable device"
	1638	LogAll "INFO: Checking $USBDEVICE"
[2924]	1639	$FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
[1684]	1640	if [ $? -ne 0 ]; then
[2963]	1641	LogAll "ERROR: Unable to access $USBDEVICE"
[3086]	1642	LogAll " Make sure your USB device is plugged in"
[2963]	1643	MindiExit -1
[1684]	1644	fi
[3149]	1645	# Some distro do auto mount at that point (Ubuntu)
[3522]	1646	LogAll "INFO: Unmounting $USBPART just in case"
[3546]	1647	sync
[1721]	1648	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[3419]	1649	if [ "$BOOT_TYPE" = "BIOS" ]; then
[3403]	1650	# If your key has no MBR it may cause an issue
	1651	# Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
	1652	if [ -r $MBRFILE ]; then
	1653	LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
[3522]	1654	dd if=$MBRFILE of=$USBDEVICE >> $LOGFILE 2>> $LOGFILE
[3403]	1655	else
	1656	LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
	1657	LogAll " on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
	1658	fi
[2855]	1659	fi
[3522]	1660	LogAll "INFO: Preparing $USBDEVICE"
[2851]	1661	cat > $MINDI_TMP/fdisk.txt << EOF
[2057]	1662	d
	1663	d
	1664	d
	1665	d
[1684]	1666	n
	1667	p
	1668	1
	1669
	1670
	1671	t
	1672	b
	1673	a
	1674	1
	1675	w
	1676	EOF
[2851]	1677	$FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
[1684]	1678	if [ $? -ne 0 ]; then
[2963]	1679	LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
[3086]	1680	LogAll " Make sure your USB device is plugged in"
[1684]	1681	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1682	MindiExit -1
	1683	fi
[2963]	1684	LogFile "fdisk build file"
	1685	LogFile "----------------"
[2851]	1686	cat $MINDI_TMP/fdisk.txt >> $LOGFILE
[2963]	1687	LogFile "----------------"
[2924]	1688	rm -f $MINDI_TMP/fdisk.txt
[3522]	1689	LogAll "INFO: The USB device $USBDEVICE now looks like this:"
[2190]	1690	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
[3006]	1691	# Calling kpartx in case devices were not created
[3033]	1692	if [ -x "/sbin/kpartx" ]; then
[3027]	1693	/sbin/kpartx -a $USBDEVICE
	1694	fi
[2461]	1695	# Some distro do auto mount at that point (Ubuntu)
[3522]	1696	LogAll "INFO: Unmounting $USBPART just in case again"
[3546]	1697	sync
[2461]	1698	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[3086]	1699	# Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
	1700	if [ "`which dmsetup`" != "" ]; then
[3368]	1701	block_id="`echo $USBPART \| sed 's/\/dev\///g'`"
	1702	if [[ "`dmsetup ls \| awk '{print $1}' \| grep $block_id`" != "" ]]; then
[3522]	1703	LogAll "INFO: Removing $block_id from device mapper."
[3368]	1704	sleep 1
	1705	dmsetup remove $block_id
	1706	fi
	1707	fi
[3522]	1708	part=$USBPART
	1709	mount_opt=""
	1710	else
	1711	# ISO image
	1712	part=$MINDI_TMP/mindi-bootroot.img
	1713	size=`du -sk $MINDI_TMP/target 2> /dev/null \| cut -f1`
	1714	# Adds 10 MB to allow for additional space
	1715	size=$(($size+10000))
	1716	LogAll "INFO: Creating a $size KB empty file for boot device of the ISO image"
	1717	dd if=/dev/zero of=$part bs=1k count=$size &> /dev/null \|\| Die "Cannot dd blank $part"
	1718	mount_opt="-o loop"
	1719	fi
	1720
	1721	LogAll "INFO: Creating a vfat filesystem on $part"
[3531]	1722
	1723	mkfs.vfat $part 2>&1 >> $LOGFILE
[3522]	1724	if [ $? -ne 0 ]; then
	1725	LogAll "ERROR: Unable to create a vfat filesystem on $part"
	1726	if [ "$target" = "USB" ]; then
	1727	LogAll " Make sure your USB device is plugged in and partitioned ($part must exist on it)"
[1684]	1728	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1729	fi
[3522]	1730	MindiExit -1
	1731	fi
[3532]	1732	if [ "$target" = "ISO" ]; then
	1733	if [ "$BOOT_TYPE" = "BIOS" ]; then
	1734	# syslinux should be run on a local file (doen't work through NFS Cf: #297)
	1735	# and run after the formating for versions > 6 it seems
	1736	syslinux $part >> $LOGFILE 2>> $LOGFILE
	1737	fi
	1738	fi
[3522]	1739	LogAll "INFO: Mounting $part on $MINDI_TMP/mpt"
	1740	mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
	1741	if [ $? -ne 0 ]; then
	1742	LogAll "ERROR: Unable to mount $part on $MINDI_TMP/mpt"
	1743	if [ "$target" = "USB" ]; then
	1744	LogAll " Make sure your USB device is plugged in, partitioned and formated ($part must exist on it)"
[1684]	1745	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1746	fi
[3522]	1747	MindiExit -1
	1748	fi
	1749
	1750	LogAll "INFO: Moving boot info on $MINDI_TMP/mpt"
	1751	mv $MINDI_TMP/target/* $MINDI_TMP/mpt
[3528]	1752	if [ $? -ne 0 ] ; then
[3522]	1753	LogFile "--------------------------------"
	1754	LogFile "INFO: Size of $MINDI_TMP/mpt:"
	1755	du -sk $MINDI_TMP/mpt/* >> $LOGFILE
	1756	LogFile "--------------------------------"
[3546]	1757	sync
[3522]	1758	umount $MINDI_TMP/mpt
	1759	LogAll "ERROR: Problems while creating boot media."
	1760	LogAll " Please unload some of your modules and try again."
	1761	Die " Try to increase EXTRA_SPACE in $MINDI_CONFIG"
	1762	fi
	1763
	1764	if [ "$target" = "ISO" ]; then
[3534]	1765	if [ "$ARCH" != "ia64" ]; then
	1766	ISO_OPT="$ISO_OPT -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
	1767	fi
[3522]	1768	# ISO
[3533]	1769	if [ "$ARCH" != "ia64" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
[3534]	1770	CMD="$ISO_CMD $ISO_OPT"
[3532]	1771	MakeISO
[3522]	1772	else
[3534]	1773	if [ "$ARCH" = "ia64" ]; then
	1774	CMD="$ISO_CMD $ISO_OPT -b images/mindi-bootroot.img -c images/boot.cat"
	1775	else
	1776	# UEFI
	1777	echo "$CMD" \| grep -q "xorriso"
	1778	if [ $? -eq 0 ]; then
	1779	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot --efi-boot images/mindi-bootroot.img -no-emul-boot"
	1780	else
	1781	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
	1782	fi
	1783	fi
[3522]	1784	fi
	1785	fi
	1786
[3546]	1787	# Avoids graphical tool to keep the FS mounted
	1788	sync
[3522]	1789	umount $MINDI_TMP/mpt \|\| Die "Unable to unmount $MINDI_TMP/mpt"
	1790
	1791	if [ "$target" = "ISO" ]; then
[3532]	1792	cp $part $MINDI_CACHE
[3533]	1793	if [ "$ARCH" = "ia64" ] \|\| [ "$BOOT_TYPE" = "UEFI" ]; then
[3535]	1794	# We just need the EFI dir and the boot image for this case
[3536]	1795	mkdir -p $MINDI_TMP/mpt2 $MINDI_TMP/mpt/images $MINDI_TMP/mpt/archives
[3535]	1796	mount -o loop $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt2 2>> $LOGFILE
	1797	# We need again the kernel+initrd at the root for UEFI boot at least
	1798	cp -a $MINDI_TMP/mpt2/EFI $MINDI_TMP/mpt2/vmlinuz $MINDI_TMP/mpt2/initrd.img $MINDI_TMP/mpt
	1799	# We need the boot image now and what mindi needs at restore time as well
	1800	cp -a $MINDI_TMP/mpt2/images/all.tar.gz $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt/images
[3546]	1801	# Avoids graphical tool to keep the FS mounted
	1802	sync
[3535]	1803	umount $MINDI_TMP/mpt2
	1804	LogFile "----------- target dir content -----------"
	1805	LogFile "------------------------------------------"
	1806	ls -lR $MINDI_TMP/mpt >> $LOGFILE
	1807	LogFile "------------------------------------------"
[3532]	1808	MakeISO
[3522]	1809	fi
	1810	else
	1811	# USB
[1684]	1812	if [ "$ARCH" != "ia64" ] ; then
[2939]	1813	syslinux -v 2>&1 \| grep -q 4.02
	1814	if [ $? -eq 0 ]; then
	1815	# This buggy version of syslinux requires a call to --stupid and not -s
	1816	syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
	1817	res=$?
	1818	else
	1819	syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
	1820	res=$?
	1821	fi
	1822	if [ $res -ne 0 ] ; then
[2963]	1823	LogAll "----------- syslinux's errors --------------"
[1684]	1824	cat $MINDI_TMP/syslinux.log \|tee -a $LOGFILE
[2963]	1825	LogAll "------------------------------------------"
[3565]	1826	LogAll "ERROR: Failed to create USB image."
[1684]	1827	else
[2963]	1828	LogFile "INFO: Created bootable USB image on $USBDEVICE"
[1684]	1829	fi
	1830	rm -f $MINDI_TMP/syslinux.log
	1831	else
[2963]	1832	LogAll "ERROR: No USB boot support for ia64"
[1684]	1833	MindiExit -1
	1834	fi
[3522]	1835	fi
[1684]	1836	}
	1837
	1838
[3522]	1839	OfferToMakeBootableUSB() {
	1840
	1841	local i files
	1842
	1843	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
	1844	echo -en "\nShall I make a bootable USB device ? (y/[n]) "
	1845	read i
	1846	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1847	if [ "$USBDEVICE" = "" ]; then
	1848	echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
	1849	read dev
	1850	USBDEVICE=$dev
	1851	fi
	1852	echo "WARNING: This will erase all content on $USBDEVICE"
	1853	echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
	1854	read i
	1855	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1856	else
	1857	if [ "$PROMPT_MAKE_USB_IMAGE" = "no" ] && [ _"$MONDO_SHARE" = _"" ] && [ "$USBDEVICE" = "" ]; then
	1858	Die "No USBDEVICE environment variable declared, aborting"
	1859	fi
	1860	fi
	1861	USBPART="${USBDEVICE}1"
	1862
	1863	MakeBootableDevice USB
	1864	}
	1865
	1866
	1867	OfferToMakeBootableISO() {
	1868
	1869	local i files
	1870
	1871	if [ -z "$ISO_CMD" ]; then
	1872	LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
	1873	return
	1874	fi
	1875
	1876	if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
	1877	echo -en "\nShall I make a bootable CD image? (y/[n]) "
	1878	read i
	1879	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1880	fi
	1881
	1882	MakeBootableDevice ISO
	1883
	1884	}
	1885
	1886
[747]	1887	MakeMessageFile() {
[2292]	1888
	1889	if [ -x "/bin/lsb_release" ]; then
	1890	DESC=`/bin/lsb_release -d \| cut -d: -f2 \| sed "s/[ \t]*//"`
[3173]	1891	elif [ -r /etc/arch-release ]; then # this code must be written before /etc/issue test to avoid errors
	1892	DESC="Arch Linux"
	1893	if [ -r /var/log/pacman.log ]; then
	1894	# there are no releases but we can get the last system upgrade
	1895	# Output example: Arch Linux [2011-03-03 01:39]
	1896	DESC="$DESC $(tac /var/log/pacman.log \| grep -m1 'full system upgrade' \| cut -d']' -f1)]"
[2754]	1897	fi
[3426]	1898	elif [ -x "/etc/os-release" ]; then
	1899	DESC=`grep PRETTY_NAME /etc/os-release \| cut -d= -f2`
	1900	elif [ -x "/usr/bin/pbdistrocheck" ]; then
	1901	# For pb >= 0.9.8
	1902	DESC=`/usr/bin/pbdistrocheck -s \| cut -d, -f1-4 \| sed 's/,/-/g'`
[2732]	1903	elif [ -r /etc/issue.net ]; then
[2731]	1904	DESC=`head -1 /etc/issue.net`
[2732]	1905	elif [ -r /etc/issue ]; then
[2731]	1906	DESC=`head -1 /etc/issue`
[747]	1907	else
[2731]	1908	DESC="Unknown desc"
[747]	1909	fi
[2292]	1910	sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt \| sed "s/KKKKK/Kernel $KERVER/" \| sed "s/AAAAA/on a $ARCH architecture/" \| sed "s/TTTTT/`LC_TIME=C date`/" \| sed "s/MMMMM/`hostname`/" \| sed "s/DDDDD/$DESC/"
[1885]	1911	if [ _"$MONDO_SHARE" != _"" ]; then
	1912	if [ "$CDRECOVERY" != "yes" ] ; then
[3270]	1913	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3281]	1914	echo -en "Press <0eenter07> for 0cnetwork restore07\n"
[3278]	1915	echo -en "$BOOT_MEDIA_MESSAGE"
[1885]	1916	elif [ ! "$MINDI_TMP" ] ; then
[3522]	1917	echo -en "FYI, this is _not_ a MondoRescue CD.\n"
	1918	if [ -e "$MINDI_LIB/memtest.img" ] ; then
	1919	echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
	1920	fi
[1885]	1921	else
	1922	echo -en "$BOOT_MEDIA_MESSAGE"
[747]	1923	fi
[1983]	1924	else
	1925	echo -en "\
[747]	1926	To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
	1927	CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
[1983]	1928	fi
[747]	1929	fi
[3173]	1930
	1931	# Also create the other help screens
	1932	head -24 $MINDI_CONF/README.bootparam \| cut -c1-80 > $1/boot1.txt
	1933	head -48 $MINDI_CONF/README.bootparam \| tail -24 \| cut -c1-80 > $1/boot2.txt
	1934	head -24 $MINDI_CONF/README.pxe \| cut -c1-80 > $1/pxe.txt
[747]	1935	}
	1936
	1937
[1983]	1938	MakeBootConfFile() {
[1885]	1939	local options i ooo
[747]	1940	options=""
[1983]	1941	# Type of boot file (elilo or syslinux/isolinux)
	1942	type=$1
[3588]	1943	if [ "$type" = "elilo" ] \|\| [ "$type" = "grub2" ]; then
[1983]	1944	sep="="
[3398]	1945	sepdef="="
[1983]	1946	else
	1947	sep=" "
[3398]	1948	sepdef=" "
[1983]	1949	fi
[925]	1950
[1983]	1951	# Generic header for conf file
[3398]	1952	if [ "$type" = "elilo" ]; then
	1953	echo -en "prompt\n"
	1954	elif [ "$type" = "grub" ]; then
	1955	echo -en "pause Press a key when ready to restore\n"
[3518]	1956	elif [ "$type" = "grub2" ]; then
	1957	echo -en "set "
[3398]	1958	else
[3535]	1959	# syslinux family
[3173]	1960	echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
[925]	1961	fi
[1983]	1962
	1963	# Compute which default option to boot from
[3398]	1964	echo -en "default${sepdef}"
[747]	1965	if [ "$CDRECOVERY" = "yes" ] ; then
[3398]	1966	if [ "$type" = "grub" ]; then
[3430]	1967	# TODO: Which num ???
[3398]	1968	echo -en "0\n"
	1969	else
	1970	echo -en "RESTORE\n"
	1971	fi
[1983]	1972	# In case it's mondoarchive
[1885]	1973	elif [ _"$MONDO_SHARE" != _"" ]; then
[3270]	1974	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3398]	1975	if [ "$type" = "grub" ]; then
	1976	echo -en "3\n"
	1977	else
	1978	echo -en "iso\n"
	1979	fi
[747]	1980	else
[3398]	1981	if [ "$type" = "grub" ]; then
	1982	echo -en "1\n"
	1983	else
	1984	echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
	1985	fi
[747]	1986	fi
	1987	else
[3398]	1988	if [ "$type" = "grub" ]; then
	1989	echo -en "0\n"
	1990	else
	1991	echo -en "expert\n"
	1992	fi
[747]	1993	fi
	1994
[1983]	1995	# Handle timeout
[3588]	1996	if [ "$type" = "grub2" ]; then
	1997	seppref="set "
	1998	else
	1999	seppref=""
[3518]	2000	fi
[3587]	2001	if [ "$CDRECOVERY" = "yes" ] ; then
[3588]	2002	echo -en "${seppref}timeout${sep}10000\n"
[3587]	2003	else
[3588]	2004	echo -en "${seppref}timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
[747]	2005	fi
	2006	echo -en "\n"
[1983]	2007
[2124]	2008	# prepare which labels will be generated
[747]	2009	if [ "$CDRECOVERY" = "yes" ] ; then
[925]	2010	options="RESTORE expert"
[1885]	2011	else
	2012	if [ _"$MONDO_SHARE" != _"" ]; then
[2344]	2013	options="interactive expert compare iso nuke isonuke"
[747]	2014	else
	2015	options="expert"
[925]	2016	fi
[747]	2017	fi
[1983]	2018
	2019	# Generate rest of conf file
[747]	2020	for i in $options ; do
[925]	2021	ooo=$i
[3111]	2022	[ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
[1983]	2023	if [ "$type" = "elilo" ]; then
[2564]	2024	outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
[3398]	2025	elif [ "$type" = "grub" ]; then
[3415]	2026	outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
[3518]	2027	elif [ "$type" = "grub2" ]; then
[3535]	2028	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2029	lorder="linuxefi"
	2030	iorder="initrdefi"
	2031	else
	2032	lorder="linux"
	2033	iorder="initrd"
	2034	fi
	2035	outstr="menuentry '$i' {\n\tinsmod all_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod part_gpt\n\tinsmod ext2\n\tinsmod xfs\n\techo 'Loading kernel...'\n\t$lorder /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\techo 'Loading ramdisk...'\n\t$iorder /initrd.img\n}\n"
[925]	2036	else
[2073]	2037	ps="/"
[2629]	2038	if [ $KERNEL_IS_XEN = "no" ]; then
	2039	outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
	2040	else
	2041	outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
	2042	fi
[925]	2043	fi
[1885]	2044	echo -en "$outstr"
[747]	2045	done
[1983]	2046	if [ -e "$MINDI_LIB/memtest.img" ] ; then
	2047	if [ "$type" = "elilo" ]; then
	2048	echo -en "image=/memtest.bin\n\tlabel=memtest\n"
[2073]	2049	echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
[3398]	2050	elif [ "$type" = "grub" ]; then
[3415]	2051	echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
[3518]	2052	elif [ "$type" = "grub2" ]; then
	2053	echo -en "menuentry 'memtest' {\n\tload_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod xfs\n\tlinux /memtest\n\tinitrd /memtest.img\n}\n"
[1983]	2054	else
[2073]	2055	ps="/"
	2056	if [ "$type" = "syslinux" ]; then
	2057	ps=""
	2058	fi
	2059	echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
	2060	echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
[1983]	2061	fi
	2062	fi
[747]	2063	}
	2064
[2006]	2065	ParseModprobeForIncludes() {
	2066	local MODPROBE_CONF mpincfile includes include
	2067
	2068	MODPROBE_CONF=/etc/modprobe.conf
	2069	mpincfile=$1
	2070	touch $mpincfile
	2071	if [ -a $MODPROBE_CONF ]; then
[2431]	2072	includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF\|sort -u)
[2006]	2073	if [ -n "$includes" ]; then
	2074	for include in $includes
	2075	do
	2076	if [ -a "$include" ]; then
	2077	echo $include >> $mpincfile
	2078	fi
	2079	done
	2080	fi
	2081	fi
	2082	}
	2083
[3585]	2084	PrepareBootDir() {
[2006]	2085
[3585]	2086	local detect
	2087	# Needs a bigdir variable setup before calling it
	2088
	2089	# copy (e)lilo/isolinux/grub/whatever stuff into it as well
	2090	# to get it on the media (in addition to the boot part
	2091	# and also to support UEFI boot mechanism
	2092	if [ "$boottype" != "" ]; then
	2093	detect="no"
	2094	else
	2095	detect="yes"
	2096	boottype=syslinux
	2097	fi
	2098	bootdir=$bigdir/$boottype
	2099	bootconf="$bootdir/$boottype.cfg"
	2100	mkdir -p $bootdir
	2101	FindLdlinux32Binary
	2102
	2103	if [ "$BOOT_TYPE" != "BIOS" ]; then
	2104	if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
	2105	LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
	2106	MindiExit -1
	2107	fi
	2108
	2109	mountefi=0
	2110	# EFI or UEFI
	2111	# TODO: names are hard-coded for now
	2112	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2113	# UEFI
	2114	efidir=$bigdir/EFI/BOOT
	2115	# Auto-detection if needed
	2116	if [ $detect = "yes" ]; then
	2117
	2118	# mount /boot/efi if needed
	2119	df -T \| grep /boot/efi \| grep -qE 'vfat'
	2120	if [ $? -ne 0 ]; then
	2121	mount /boot/efi
	2122	if [ $? -ne 0 ]; then
	2123	echo "ERROR: You have to mount your (U)EFI partition when using mindi"
	2124	MindiExit -1
	2125	fi
	2126	mountefi=1
	2127	fi
	2128
	2129	# On RHEL6 grub works
	2130	dname=`pbdistrocheck \| grep -E '^Name:' \| cut -d':' -f2`
	2131	dver=`pbdistrocheck \| grep -E '^Ver:' \| cut -d':' -f2`
	2132	if [ $dname = "rhel" ] && [ $dver = "6" ]; then
	2133	boottype=grub
	2134	elif [ $dname = "rhel" ] && [ $dver = "7" ]; then
	2135	boottype=grub2
	2136	elif [ $dname = "debian" ] && [ $dver = "8" ]; then
	2137	boottype=grub2
	2138	else
	2139	# Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
	2140	boottype=syslinux
	2141	fi
	2142	fi
	2143	if [ "$boottype" = "syslinux" ]; then
	2144	if [ ! "$bootbin" ]; then
	2145	FindSyslinux64EFI
	2146	bootbin=$SYSLINUX64EFI
	2147	fi
	2148	bootconf="$efidir/syslinux.cfg"
	2149	elif [ "$boottype" = "grub" ]; then
	2150	if [ ! "$bootbin" ]; then
	2151	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
	2152	fi
	2153	bootconf="$efidir/BOOTX64.conf"
	2154	elif [ "$boottype" = "grub2" ]; then
	2155	if [ ! "$bootbin" ]; then
	2156	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
	2157	fi
	2158	bootconf="$efidir/grub.cfg"
	2159	fi
	2160
	2161	# Depending on the arch, the target boot file is different
	2162	if [ "$ARCH" = "x86_64" ] ; then
	2163	tgbin="BOOTX64.efi"
	2164	elif [ "$ARCH" = "armv8" ]; then
	2165	tgbin="BOOTAA64.efi"
	2166	else
	2167	# i?386
	2168	tgbin="BOOTIA32"
	2169	fi
	2170	else
	2171	# EFI
	2172	efidir=$bootdir
	2173	bootbin=`find /boot/efi -iname "elilo.efi" \| head -1`
	2174	tgbin=$bootbin
	2175	boottype=elilo
	2176	bootconf="$efidir/elilo.conf"
	2177	fi
	2178	LogAll "INFO: Found $boottype boot type"
	2179	mkdir -p $efidir
	2180	cp $bootbin $efidir/$tgbin
	2181
	2182	if [ $mountefi -eq 1 ]; then
	2183	umount /boot/efi 2>&1 > /dev/null
	2184	fi
	2185
	2186	if [ $boottype = "syslinux" ]; then
	2187	FindLdlinuxe64Binary
	2188	if [ -e "$LDLINUXE64" ]; then
	2189	LogFile "INFO: Copying $LDLINUXE64 to $efidir"
	2190	cp $LDLINUXE64 $efidir 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
	2191	cp $LDLINUXE64/../libutil.c32 $efidir 2>> $LOGFILE \|\| Die "Cannot copy libutil.c32 to $efidir). Did you run out of disk space?"
	2192	if [ -e $LDLINUXE64/../isolinux.c32 ]; then
	2193	cp $LDLINUXE64/../isolinux.c32 $efidir 2>> $LOGFILE \|\| Die "Cannot copy isolinux.c32 to $efidir). Did you run out of disk space?"
	2194	fi
	2195	fi
	2196	fi
	2197	# tgdir for syslinux
	2198	tgdir=$bigdir/EFI
	2199	else
	2200	# tgdir for syslinux
	2201	tgdir=$bootdir
	2202	fi
	2203	# In all cases prepare syslinux content for BIOS mode
	2204	# so that we can have multi boot mode media BIOS+UEFI
	2205	# Useful for syslinux 5.x
	2206	if [ -e "$LDLINUXC32" ]; then
	2207	LogFile "INFO: Copying $LDLINUXC32 to $tgdir"
	2208	cp $LDLINUXC32 "$tgdir" 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXC32 to $tgdir. Did you run out of disk space?"
	2209	fi
	2210	if [ -e $LDLINUXC32/../isolinux.c32 ]; then
	2211	LogFile "INFO: Copying isolinux.c32 to $tgdir"
	2212	cp $LDLINUXC32/../isolinux.c32 $tgdir 2>> $LOGFILE \|\| Die "Cannot copy isolinux.c32 to $tgdir). Did you run out of disk space?"
	2213	fi
	2214
	2215	# Here we need to know the ramdisk_size
	2216	size_of_all_tools=`du -sk $bigdir \| cut -f1`
	2217	export ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
	2218	LogFile "INFO: Ramdisk will be $ramdisk_size KB"
	2219
	2220	MakeBootConfFile $boottype > $bootconf
	2221	LogFile "Boot Conf file $bootconf content is:"
	2222	LogFile "------------------------------------"
	2223	cat $bootconf >> $LOGFILE
	2224	LogFile "------------------------------------"
	2225	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2226	# Also generate the syslinux conf
	2227	MakeBootConfFile syslinux > "$bigdir/EFI/syslinux.cfg"
	2228	LogFile "Boot Conf file $bigdir/EFI/syslinux.cfg content is:"
	2229	LogFile "---------------------------------------------------"
	2230	cat $bigdir/EFI/syslinux.cfg >> $LOGFILE
	2231	LogFile "---------------------------------------------------"
	2232	fi
	2233
	2234	}
	2235
	2236	PrepareAllTar() {
	2237	echo -en "INFO: Tarring and zipping the data content..."
	2238	(cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log \| gzip -9 > $MINDI_CACHE/all.tar.gz \|\| LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
	2239	LogFile "Size of the data content"
	2240	LogFile "------------------------"
	2241	du -sk $MINDI_CACHE/*gz >> $LOGFILE
	2242	LogFile "------------------------"
	2243	echo -e "$DONE"
	2244
	2245	[ "$bigdir" != "/" ] && rm -rf $bigdir
	2246	}
	2247
[747]	2248	PrepareDataDiskImages() {
[3522]	2249	local needlist bigdir diskdir res i j k lines lfiles includefile
[747]	2250
[3407]	2251	rm -f $MINDI_CACHE/mindi.iso
[940]	2252	needlist=$MINDI_TMP/what-we-need.txt
	2253	bigdir=$MINDI_TMP/bigdir
[747]	2254	mkdir -p $bigdir/usr/bin
[1983]	2255	mkdir -p $bigdir/usr/sbin
[2006]	2256	includefile=$MINDI_TMP/$$.includefile.txt
[747]	2257
[3149]	2258	lfiles=`ls $DEPLIST_DIR/* \| grep -v /minimal`
[2409]	2259	if [ -e "$DEPLIST_FILE" ]; then
[3149]	2260	lfiles="$DEPLIST_FILE $lfiles"
[2409]	2261	fi
[1885]	2262	lines=`grep -vx " #." $lfiles \| grep -vx "" \| wc -l`
[2006]	2263	ParseModprobeForIncludes $includefile
[2019]	2264	lines=$(($lines+`cat $includefile \| wc -l`))
[2006]	2265	cat $lfiles $includefile \| GenerateGiantDependencyList $needlist $lines
[747]	2266	res=$?
[2006]	2267	rm -f $includefile
[3231]	2268	ListKernelModulePaths >> $needlist
[747]	2269	if [ "$res" -ne "0" ] ; then
[1902]	2270	Die "You have $res files present in dependency list\nbut absent from filesystem."
[747]	2271	fi
	2272	mkdir -p $bigdir/tmp
[1885]	2273	if [ _"$MONDO_SHARE" != _"" ]; then
[3430]	2274	# TODO: no reason to have the cfg file stored twice
[3278]	2275	MakeMondoConfigFile $MINDI_TMP/$MRCFG
	2276	cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
[747]	2277	fi
[3281]	2278
	2279	# Needs to be done after the MRCFG creation
	2280	FindAndAddUserKeyboardMappingFile
	2281
[3166]	2282	[ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
[747]	2283	DropOptimizedLibraries $needlist $bigdir
[3522]	2284	echo -en "INFO: Assembling dependency files"
[747]	2285
[3522]	2286	CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist` 1
[3585]	2287	rm -f $needlist
[3522]	2288	echo -e "$DONE"
[3149]	2289
[925]	2290	# also copy io.sys and msdos.sys, if we can find them
[747]	2291	for i in `mount \| cut -d' ' -f3` ; do
[925]	2292	for j in io.sys msdos.sys ; do
[963]	2293	[ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
[925]	2294	done
[747]	2295	done
	2296
[925]	2297	# master boot record, too
[940]	2298	i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
[3403]	2299	if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
[3149]	2300	LogAll "INFO: Backing up $i's MBR"
[925]	2301	dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
	2302	sleep 1
	2303	sync
	2304	j=$i
	2305	[ -h "$j" ] && j=`readlink -f $j`
[3149]	2306	LogAll "INFO: Creating /dev/boot_device ($j)"
[925]	2307	mkdir -p $bigdir/dev
[2089]	2308	cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE \|\| Die "Unable to create /dev/boot_device on ramdisk"
[747]	2309	fi
	2310
[1983]	2311	# Get terminfo content
	2312	ti="usr/share/terminfo/l"
	2313	if [ -d /$ti ]; then
[3522]	2314	mkdir -p $bigdir/$ti
	2315	cp -Rdf /$ti/* $bigdir/$ti 2>> $LOGFILE \|\| LogAll "ERROR: issue copying terminfo"
[747]	2316	fi
[1764]	2317	if [ -e "$MONDO_SHARE/restore-scripts" ]; then
[3543]	2318	cp -Rdf $MONDO_SHARE/restore-scripts/mondo/* $bigdir/usr/bin 2>> $LOGFILE
[3528]	2319	[ $? -ne 0 ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
[3543]	2320	cp -Rdf $MONDO_SHARE/restore-scripts/etc/* $bigdir/etc 2>> $LOGFILE
[747]	2321	fi
[2290]	2322	if [ -d "/lib/dev-state" ]; then
[3542]	2323	cp -a /lib/dev-state $bigdir/lib/ 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
[2290]	2324	fi
[747]	2325	TOTAL_BIGDIR_SIZE=`du -sk $bigdir \| cut -f1`
[940]	2326	MakeMountlist $MINDI_TMP/mountlist.txt
[2432]	2327	CheckMountlist $MINDI_TMP/mountlist.txt
[1902]	2328	mkdir -p $bigdir/tmp
[2092]	2329	cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE \|\| Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
[1885]	2330	if [ _"$MONDO_SHARE" != _"" ]; then
[1902]	2331	cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
[1885]	2332	fi
[2032]	2333	if [ $LVM != "false" ]; then
	2334	$MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
[3528]	2335	if [ $? -ne 0 ]; then
[2032]	2336	LVM="false"
	2337	rm -f $bigdir/tmp/i-want-my-lvm
[2552]	2338	else
[2963]	2339	LogFile "Your i-want-my-lvm file content is:"
	2340	LogFile "-----------------------------------"
[2552]	2341	cat $bigdir/tmp/i-want-my-lvm >> $LOGFILE
[2963]	2342	LogFile "-----------------------------------"
[2032]	2343	fi
	2344	fi
[3522]	2345	LogFile "INFO: Your mountlist.txt file content is:"
[2963]	2346	LogFile "-----------------------------------"
[1902]	2347	cat $bigdir/tmp/mountlist.txt >> $LOGFILE
[2963]	2348	LogFile "-----------------------------------"
[2432]	2349
[2092]	2350	echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
	2351	echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
[1902]	2352	if [ _"$MONDO_SHARE" != _"" ]; then
	2353	for q in filelist.full.gz biggielist.txt ; do
	2354	[ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
	2355	cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
	2356	done
	2357	fi
	2358
[3585]	2359	PrepareBootDir
	2360	PrepareAllTar
[747]	2361	}
	2362
	2363
	2364	Prompt() {
	2365	echo -en "$1"
	2366	read line
	2367	}
	2368
	2369
	2370	ReadLine() {
	2371	local i incoming
	2372	read incoming
	2373	i=0
	2374	while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
[925]	2375	i=$(($i+1))
	2376	read incoming
[747]	2377	done
	2378	echo "$incoming"
	2379	}
	2380
	2381
	2382	SizeOfPartition() {
	2383	local devpath drive res stub
	2384	device=$1
[2917]	2385	if [ "`echo "$device" \| grep -E "^/dev/"`" = "" ] ; then
	2386	Die "Cannot find $device's size - is your /etc/fstab sane?"
	2387	fi
[747]	2388	if [ "`echo "$device" \| grep -F "/dev/md"`" != "" ] ; then
[925]	2389	res=`SizeOfRaidPartition $device`
	2390	[ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
	2391	echo "$res"
	2392	return 0
[747]	2393	fi
[925]	2394	# patch from Bill <bill@iwizard.biz> - 2003/08/25
[960]	2395	res=`$FDISK -s $device 2>> $LOGFILE`
[925]	2396	# end patch
[2448]	2397	# take only the first in case of multiple mount (cifs, nfs, ...)
	2398	[ "$res" = "" ] && res=`df -k -P -x supermount \| tr -s '\t' ' ' \| grep -F "$device " \| cut -d' ' -f2 \| head -1`
[747]	2399	[ "$res" = "" ] && res="-1"
	2400	echo $res
	2401	return 0
	2402	}
	2403
	2404
	2405	SizeOfRaidPartition() {
	2406	local real_dev smallest_size silly tmp
	2407
	2408	silly=999999999
	2409	smallest_size=$silly
	2410
	2411	for real_dev in `GetRaidDevMembers $1` ; do
[925]	2412	tmp=`SizeOfPartition $real_dev`
	2413	[ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
[747]	2414	done
	2415
	2416	if [ "$smallest_size" = "$silly" ] ; then
[925]	2417	echo "-1"
	2418	return 1
[747]	2419	else
[925]	2420	echo "$smallest_size"
	2421	return 0
[747]	2422	fi
	2423	}
	2424
	2425
	2426	StripExecutable()
	2427	{
	2428	local tmpfile
[925]	2429
[940]	2430	tmpfile=$MINDI_TMP/stripped.$$.dat
[747]	2431	[ -d "$1" ] \|\| [ -h "$1" ] && return
[963]	2432	cp -f $1 $tmpfile 2>> $LOGFILE
[747]	2433	strip $tmpfile 2> /dev/null
[3528]	2434	if [ $? -eq 0 ] ; then
[963]	2435	cp -f $tmpfile $1 2>> $LOGFILE
[2963]	2436	LogFile "INFO: Stripped binary $2"
[747]	2437	fi
	2438	rm -f $tmpfile
	2439	}
	2440
[2292]	2441	KernelVer() {
	2442	local fkern_ver fname
[747]	2443
[2292]	2444	fname=$1
	2445	file $fname \| grep -q gzip
[3528]	2446	if [ $? -eq 0 ] ; then
[2292]	2447	# Used by ia64
[3528]	2448	fkern_ver=`gzip -cd $fname \| strings 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
[2292]	2449	else
[3528]	2450	fkern_ver=`strings $fname 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
[2292]	2451	fi
	2452	echo "$fkern_ver"
	2453	}
	2454
	2455
[2880]	2456	# WARNING: This function should just echo the final result !!!
	2457	#
[747]	2458	TryToFindKernelPath() {
[2880]	2459	local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
[925]	2460
[2292]	2461	we_want_version=$KERVERRUN
[747]	2462	possible_kernels=""
	2463	duff_kernels=""
[2880]	2464	output=""
[3368]	2465
[747]	2466	if [ "$ARCH" = "ia64" ] ; then
	2467	root="/boot/efi/efi"
	2468	else
	2469	root="/"
	2470	fi
[2681]	2471	# See if we're booted from a Xen kernel
[2889]	2472	# From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
	2473	if [ -f /proc/xen/capabilities ]; then
[2681]	2474	# It's a Xen kernel
	2475	KERNEL_IS_XEN="yes"
[2963]	2476	LogFile "INFO: It's a Xen kernel..."
[2681]	2477	fi
	2478
[3122]	2479	for fname in `find $root -maxdepth 2 -type f \| grep -Ei 'lin\|kern\|xen' \| grep -Ev '^/proc/\|^/net/\|^/mnt\|^/lib\|^/lib64\|^/bin\|^/sbin\|^/usr\|^/tmp'` ; do
[925]	2480	[ ! -e "$fname" ] && continue
[747]	2481	[ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
[2292]	2482	fkern_ver=`KernelVer $fname`
[747]	2483	[ "$fkern_ver" = "" ] && continue
	2484	[ "`echo "$fkern_ver" \|grep -F "$we_want_version "`" = "" ] && continue
[925]	2485	[ -f "$fname" ] \|\| continue
	2486	[ -h "$fname" ] && continue
	2487	kdate=`uname -v \| $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' \| $AWK '{print $NF;}'`
	2488	file $fname \| grep -q gzip
[3528]	2489	if [ $? -eq 0 ] ; then
[925]	2490	# Used by ia64
	2491	if [ "`gzip -cd $fname \| strings 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[2880]	2492	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
[925]	2493	duff_kernels="$fname $duff_kernels"
	2494	else
[747]	2495	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2496	possible_kernels="$fname $possible_kernels"
[925]	2497	fi
[747]	2498	else
[925]	2499	if [ "`strings $fname 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[2880]	2500	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
[925]	2501	duff_kernels="$fname $duff_kernels"
	2502	else
[747]	2503	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2504	possible_kernels="$fname $possible_kernels"
[925]	2505	fi
[747]	2506	fi
	2507	done
	2508	if [ ! "$possible_kernels" ] && uname -a \| grep Knoppix > /dev/null ; then
[3535]	2509	possible_kernels=`find /boot/vmlinuz-[2-9].* \| tail -n1`
[747]	2510	fi
	2511	if [ ! "$possible_kernels" ] ; then
[3149]	2512	LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
[747]	2513	possible_kernels="$duff_kernels"
	2514	if [ ! "$possible_kernels" ] ; then
[3149]	2515	LogAll "INFO: Sorry, no duff kernels either"
[747]	2516	else
[3149]	2517	LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
	2518	LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
[747]	2519	fi
	2520	fi
[2681]	2521	if [ $KERNEL_IS_XEN = "yes" ]; then
	2522	possible_xenkernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -i "xen" \| sort -u \| tr '\n' ' '`
	2523	noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
	2524	fi
[2829]	2525	possible_kernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -vi "xen" \| sort -u \| tr '\n' ' '`
	2526	noof_kernels=`CountItemsIn "$possible_kernels"`
[747]	2527	if [ "$noof_kernels" -eq "0" ] ; then
[3149]	2528	LogAll "Could not find your kernel."
[925]	2529	if [ -e "/boot/vmlinuz" ] ; then
[3149]	2530	LogAll "INFO: Using /boot/vmlinuz as a last resort."
[925]	2531	output=/boot/vmlinuz
[747]	2532	else
[925]	2533	output=""
	2534	fi
[747]	2535	elif [ "$noof_kernels" -eq "1" ] ; then
[2880]	2536	kp=`echo "$possible_kernels" \| sed s/' '//`
[2963]	2537	LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
[2880]	2538	output="$kp"
[747]	2539	else
	2540	for i in $possible_kernels ; do
[2880]	2541	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
[3149]	2542	LogAll "INFO: OK, I used my initiative and found that "
	2543	LogAll "INFO: $i is probably your kernel. "
[925]	2544	output="$i"
[2858]	2545	break
[925]	2546	fi
[747]	2547	done
[2858]	2548	if [ ! -n "$output" ]; then
[2880]	2549	if [ "`echo " $possible_kernels " \| grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
[2681]	2550	output=/boot/vmlinuz
[2963]	2551	LogFile "INFO: Schlomo, this one's for you."
[2681]	2552	else
[2963]	2553	LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
	2554	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
	2555	LogFile "INFO: $possible_kernels"
[2880]	2556	output=""
[2681]	2557	fi
	2558	fi
	2559	fi
	2560	if [ $KERNEL_IS_XEN = "yes" ]; then
	2561	if [ "$noof_xenkernels" -eq "0" ]; then
	2562	xenkernelpath=""
	2563	elif [ "$noof_xenkernels" -eq "1" ]; then
	2564	xenkernelpath=`echo "$possible_xenkernels" \| sed s/' '//`
[2963]	2565	LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
[925]	2566	else
[2681]	2567	for i in $possible_xenkernels ; do
[2880]	2568	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
[2963]	2569	LogFile "INFO: OK, I used my initiative and found that "
	2570	LogFile "INFO: $i is probably your Xen kernel. "
[2681]	2571	xenkernelpath="$i"
[2858]	2572	break
[2681]	2573	fi
	2574	done
[2858]	2575	if [ ! -n "$xenkernelpath" ]; then
[2681]	2576	new_possible_xenkernels=`echo "$possible_xenkernels" \| tr -s ' ' '\n' \| grep -E "^/boot" \| sort -u \| tr '\n' ' '`
	2577	if [ ! -n "$new_possible_xenkernels" ]; then
	2578	xenkernelpath=`echo $new_possible_xenkernels \| tr -s ' ' '\n' \| head -1`
[2963]	2579	LogFile "INFO: Using $xenkernelpath"
[2681]	2580	else
[2963]	2581	LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
	2582	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
	2583	LogFile "INFO: $possible_xenkernels"
[2880]	2584	output=""
[2681]	2585	xenkernelpath=`echo $possible_xenkernels \| tr -s ' ' '\n' \| head -1`
[2963]	2586	LogFile "INFO: Using $xenkernelpath"
[2681]	2587	fi
	2588	fi
[925]	2589	fi
[2681]	2590	if [[ -z "$xenkernelpath" \|\| ! -f "$xenkernelpath" ]]; then
	2591	Die "Cannot find Xen kernel $xenkernelpath, aborting"
	2592	fi
[747]	2593	fi
[3357]	2594	#LogAll "TryToFindKernelPath found $output"
[2681]	2595	echo "$output"
[747]	2596	}
	2597
	2598
[3522]	2599	MakeBootInitFile() {
	2600	local tgz_dir_fname rdz_fname tempfile nodes kernelsize res currsize not_copied j k s w needed_modules_path d thelink templog
[925]	2601
[747]	2602	tgz_dir_fname=$1
	2603	rdz_fname=$2
[1983]	2604	kernelsize=$3
[940]	2605	tempfile=$MINDI_TMP/temp.rd
[3403]	2606	res=0
	2607	templog=$MINDI_TMP/$$.log
	2608	> $templog
	2609
[3522]	2610	LogAll "INFO: Making Boot RAM Disk ($ramdisk_size KB)"
	2611	dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null \|\| Die "Not enough room for temporary ramdisk (MakeBootInitFile)"
	2612	LogAll "INFO: Creating ext2 filesystem on $tempfile"
[1764]	2613	mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE \|\| Die "Unable to create an ext2 file system on $tempfile"
[747]	2614	mkdir -p $mountpoint
	2615	mount -t ext2 -o loop $tempfile $mountpoint \|\| Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
[2034]	2616
[3248]	2617	# Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
	2618	for d in bin sbin lib lib64; do
	2619	if [ -h "/$d" ]; then
	2620	thelink=`readlink /$d`
[3565]	2621	mkdir -p $mountpoint/$thelink \|\| LogAll "ERROR: Unable to create $thelink in $mountpoint."
[3248]	2622	mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
	2623	if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
	2624	rmdir $mountpoint/$d
	2625	fi
	2626	if [ ! -h $mountpoint/$d ]; then
	2627	rm -f $mountpoint/$d 2> /dev/null
[3565]	2628	(cd $mountpoint ; ln -s $thelink $d) \|\| LogAll "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
[3248]	2629	fi
	2630	fi
	2631	done
[3357]	2632
[3248]	2633	LogFile "INFO: what is now in $mountpoint"
[3522]	2634	ls -al $mountpoint >> $LOGFILE
[3172]	2635
[2963]	2636	# Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
[3357]	2637	# copy from rootfs into mountpoint
[3522]	2638	LogAll "INFO: Copying Mindi files onto $mountpoint"
[2963]	2639	for f in $tgz_dir_fname/*; do
	2640	if [ ! -r $f ]; then
	2641	Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
	2642	else
[3522]	2643	cp -af $f $mountpoint 2>&1 >> $LOGFILE
[2963]	2644	fi
	2645	done
[3522]	2646	(cd $mountpoint/etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
	2647	(cd $mountpoint ; ln -sf usr/sbin/init linuxrc)
[1914]	2648
[3522]	2649	(cd $mountpoint/dev ; tar -zxf dev-entries.tgz \|\| Die "Cannot untar dev-entries.tgz" ; rm -f dev-entries.tgz)
[747]	2650
	2651	for w in insmod.static insmod.static.old ; do
[925]	2652	s=`which $w 2> /dev/null`
	2653	if [ -e "$s" ] ; then
[3522]	2654	tar cf - -C / $s 2> /dev/null \| (cd $mountpoint ; tar xf -)
[925]	2655	fi
[747]	2656	done
	2657
	2658	[ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
[2951]	2659
[2438]	2660	# Copy of files mandatory for ssh to automate mount if sshfs is used
[3358]	2661	mkdir -p $mountpoint/.ssh $mountpoint/tmp
[3204]	2662	cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
[3241]	2663	cat > $mountpoint/tmp/myssh << EOF
[2438]	2664	ssh -o StrictHostKeyChecking=no $*
	2665	EOF
	2666	chmod 755 $mountpoint/tmp/myssh
	2667
[2039]	2668	# Copy of files mandatory for ld.so
[3204]	2669	cp -a /etc/ld.so.c* $mountpoint/etc
[2039]	2670
[2951]	2671	# Handle the case where busybox and mount are dynamically linked
[3231]	2672	file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 \| grep -q "dynamically"
[2951]	2673	if [ $? -eq 0 ]; then
	2674	# We want to use the real mount and all the supported variants (nfs, cifs, ...)
[3565]	2675	rm -f $mountpoint/bin/mount
[2951]	2676	fi
	2677
[3522]	2678	# Copy of files from the minimal env needed as per the deplist.d/minimal.conf (which includes all busybox deps)
	2679	echo -en "INFO: Gathering dependencies of required files..."
[3081]	2680	rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
[3522]	2681	lines=`cat $DEPLIST_DIR/minimal.conf \| grep -vE " #.\|^#" \| sort -u`
	2682	noof_lines=`echo $lines \| wc -w`
	2683	progress=0
	2684	for f in $lines; do
[3277]	2685	if [ -d $f ]; then
	2686	for g in `find $f`; do
	2687	echo $g >> $MINDI_TMP/minimal.lis
	2688	LocateDeps $g >> $MINDI_TMP/minimal2.lis
	2689	done
	2690	else
	2691	if [ -r $f ]; then
	2692	echo $f >> $MINDI_TMP/minimal.lis
	2693	LocateDeps $f >> $MINDI_TMP/minimal2.lis
	2694	fi
[3081]	2695	fi
[3522]	2696	progress=$(($progress+1))
	2697	LogProgress $progress $noof_lines
[2951]	2698	done
[3522]	2699	echo -e "$DONE"
	2700	echo -en "INFO: Processing all dependencies links..."
	2701	lines=`sort -u $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis`
	2702	noof_lines=`echo $lines \| tr ' ' '\n' \| wc -l`
	2703	progress=0
	2704	for f in $lines; do
[3231]	2705	mr-read-all-link $f >> $MINDI_TMP/minimal.lis
[3522]	2706	progress=$(($progress+1))
	2707	LogProgress $progress $noof_lines
[2951]	2708	done
[3522]	2709	echo -e "$DONE"
[2951]	2710	# Initial / are trucated by tar
[3014]	2711	finallist=""
[3204]	2712	# Remove directories from the list, as tar/cp will create them anyway
[3014]	2713	# and it may hurt if /lib is in it as on Debian/Ubuntu
[3166]	2714	# recent bash says that -d is true for a link to a dir !
[3014]	2715	for f in `sort -u $MINDI_TMP/minimal.lis`; do
[3479]	2716	if [ -e "$f" -a ! -d "$f" ] \|\| [ -h $f ]; then
[3357]	2717	# Do not overwrite files already in destination (avoid using option -n of cp not portable)
	2718	if [ ! -e "$mountpoint/$f" ]; then
	2719	finallist="$finallist $f"
	2720	fi
[3014]	2721	fi
	2722	done
[3357]	2723	rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
	2724
[3522]	2725	fnllist=`echo $finallist \| tr ' ' '\n' \| sort -u \| tr '\n' ' '`
	2726	LogFile "INFO: Copy the minimal env with cp -a --parents $fnllist -t $mountpoint"
[3565]	2727	cp -a --parents $fnllist -t $mountpoint 2> $templog \|\| LogAll "WARNING: Problem in minimal analysis" $templog
[3000]	2728
[3357]	2729	# In case target /bin dir still doesn't exist, create it before using it
	2730	if [ ! -d $mountpoint/bin ]; then
	2731	mkdir -p $mountpoint/bin
	2732	fi
	2733
	2734	# For older distributions expecting /sbin/init provides it
[3525]	2735	if [ ! -e "$mountpoint/sbin/init" ]; then
[3522]	2736	(cd $mountpoint/sbin ; ln -sf ../usr/sbin/init .)
[3357]	2737	fi
	2738
[3000]	2739	# To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
[3522]	2740	(cd $mountpoint ; ln -sf /bin/bash bin/sh)
[3405]	2741	LogFile "INFO: Using bash as default shell"
[2951]	2742
	2743	# Avoids an issue on some distro (RHEL5)
[2164]	2744	rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
	2745
[1724]	2746	# Management of udev (which includes modprobe in rules)
[1759]	2747	ps auxww \| grep -v grep \| grep -qw udevd
[1716]	2748	if [ $? -eq 0 ]; then
[1914]	2749	echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
[3405]	2750	LogFile "INFO: udev device manager found"
[3565]	2751	tar cf - -C / /etc/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /etc/udev analysis" $templog
[3204]	2752	# This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
[3565]	2753	rm -f $mountpoint/etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
[2894]	2754	# Do not do it if it's a link (Ubuntu 64 bits #503)
[3197]	2755	if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
[3565]	2756	tar cf - -C / /lib64/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /lib64/udev analysis" $templog
[2894]	2757	fi
[2895]	2758	if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [ ! -h "/lib32/udev" ]; then
[3565]	2759	tar cf - -C / /lib32/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /lib32/udev analysis" $templog
[2895]	2760	fi
	2761	if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [ ! -h "/lib/udev" ]; then
[3565]	2762	tar cf - -C / /lib/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /lib/udev analysis" $templog
[2895]	2763	fi
[3261]	2764	if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [ ! -h "/usr/lib/udev" ]; then
[3565]	2765	tar cf - -C / /usr/lib/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /usr/lib/udev analysis" $templog
[3261]	2766	fi
[3489]	2767	if [ -x /sbin/udevd ] \|\| [ -x /usr/bin/udevd ] \|\| [ -x /usr/lib/systemd/systemd-udevd ] \|\| [ -x /lib/systemd/systemd-udevd ]; then
[2964]	2768	lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
[1781]	2769	lis=""
	2770	# Get only the files which exist in that list
[1815]	2771	# and potentially their symlink structure
[1781]	2772	for i in $lis2; do
[1815]	2773	if [ -h $i ]; then
	2774	j=$i
	2775	while [ -h $j ]; do
	2776	lis="$lis $j"
[3204]	2777	j=`readlink -f $j`
[1815]	2778	done
	2779	lis="$lis $j"
[3525]	2780	elif [ -d $i ]; then
	2781	lis3="$lis3 $i"
[1815]	2782	elif [ -f $i ]; then
[1781]	2783	lis="$lis $i"
	2784	fi
	2785	done
	2786	# And their deps
[1759]	2787	LocateDeps $lis > $MINDI_TMP/udev.lis
	2788	for i in $lis; do
	2789	if [ "`echo $i \| cut -c1`" = "/" ]; then
	2790	j=`echo $i \| cut -c2-`
[3565]	2791	[ "$j" != "" ] && rm -f $mountpoint/$j
[1759]	2792	fi
[3204]	2793	echo "$i" >> $MINDI_TMP/udev.lis
[1759]	2794	done
[3257]	2795	finallist=""
	2796	# Remove directories from the list, as tar/cp will create them anyway
	2797	# and it may hurt if /lib is in it as on Debian/Ubuntu
	2798	# recent bash says that -d is true for a link to a dir !
	2799	for f in `sort -u $MINDI_TMP/udev.lis`; do
[3479]	2800	if [ -e "$f" -a ! -d "$f" ] \|\| [ -h "$f" ]; then
[3357]	2801	# Do not overwrite files already in destination (avoid using option -n of cp not portable)
	2802	if [ ! -e "$mountpoint/$f" ]; then
	2803	finallist="$finallist $f"
	2804	fi
[3257]	2805	fi
	2806	done
[3525]	2807	# But adds the directory useful for udev in $lis3
[3522]	2808	fnllist=`echo $finallist \| tr ' ' '\n' \| sort -u \| tr '\n' ' '`
	2809	LogFile "INFO: Copying udev related files with cp -a --parents $fnllist -t $mountpoint/"
[3565]	2810	cp -a --parents $fnllist $lis3 -t $mountpoint/ 2> $templog \|\| LogAll "WARNING: Problem in udev.lis analysis" $templog
[1721]	2811	rm -f $MINDI_TMP/udev.lis
[1720]	2812	else
[2965]	2813	LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
[2963]	2814	LogAll " mindi will use static devices which may cause problems"
[1914]	2815	rm -f $mountpoint/tmp/USE-UDEV
[1720]	2816	fi
[1716]	2817	fi
[1786]	2818
[2882]	2819	# Management of potential HW info (ProLiant only at the moment)
[1880]	2820	rm -rf $MINDI_CACHE/bkphw
	2821	mindi-bkphw $MINDI_CACHE $MINDI_CONF \| tee -a $LOGFILE
	2822	if [ -d $MINDI_CACHE/bkphw ]; then
[3565]	2823	LogAll "INFO: Hardware Information found and saved ..."
[3522]	2824	cp -rp $MINDI_CACHE/bkphw $mountpoint
[1880]	2825	if [ -f $MINDI_CACHE/tools.files ]; then
	2826	lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
[1863]	2827	LocateDeps $lis > $MINDI_TMP/tools.lis
[3565]	2828	tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in tools.lis analysis" $templog
[1863]	2829	fi
[1880]	2830	if [ -f $MINDI_CACHE/mindi-rsthw ]; then
[3522]	2831	mv -f $MINDI_CACHE/mindi-rsthw $mountpoint
	2832	chmod 755 $mountpoint/mindi-rsthw
[1761]	2833	fi
[1880]	2834	rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
[1761]	2835	fi
	2836
[2183]	2837	# Management of perl scripts delivered needed at restore time
[3522]	2838	LogAll "INFO: Analyzing perl modules dependencies..."
[3565]	2839	mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]bin/mr- 2> $templog > $MINDI_TMP/perl.lis \|\| LogAll "ERROR: Problem in mindi-get-perl-modules" $templog
[3405]	2840	LogFile "DBG4: Perl Modules found:"
	2841	LogFile "-------------------------"
[3403]	2842	cat $MINDI_TMP/perl.lis >> $LOGFILE
[3405]	2843	LogFile "-------------------------"
[3565]	2844	tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in perl scripts analysis" $templog
[2183]	2845
[1885]	2846	for w in cdrom groovy-stuff ; do
[747]	2847	mkdir -p mnt/$w
	2848	done
	2849
[3565]	2850	tar cf - -C / /dev/fd0[1,2][4,7,8] 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in fd dev analysis" $templog
[1721]	2851
[1885]	2852	needed_modules=""
[1993]	2853	list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
[1885]	2854
[3270]	2855	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[747]	2856	# For PXE boot
	2857	list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
	2858	fi
[1727]	2859	for i in $DENY_MODS; do
[2963]	2860	LogFile "INFO: Removing $i from the list of modules to load"
[1727]	2861	list_of_groovy_mods=`echo ${list_of_groovy_mods} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
	2862	done
	2863
[3253]	2864	if [ "${kernelname}" != "" ]; then
	2865	needed_modules_path=lib/modules/${kernelname}
[3257]	2866	mkgmopt="-k ${kernelname}"
[3253]	2867	else
	2868	needed_modules_path=lib/modules/$KERVERRUN
	2869	mkgmopt="-k $KERVERRUN"
	2870	fi
[1914]	2871
[3565]	2872	[ -e "/$needed_modules_path" ] \|\| LogAll "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then mindi won't probably work."
[3522]	2873	LogAll "INFO: Analyzing kernel modules dependencies..."
[3253]	2874	needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
	2875
[3257]	2876	LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
[3565]	2877	cp --parents -aL $needed_modules $mountpoint/ 2> $templog \|\| LogAll "ERROR: Unable to copy modules to $mountpoint" $templog
[3253]	2878
	2879	# Uncompress modules if not using udev and native modprobe
	2880	if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
	2881	for i in $needed_modules; do
	2882	if [ "`echo "$i" \| grep -E ".gz$"`" ]; then
[1727]	2883	gunzip -f $mountpoint/$i
[1815]	2884	fi
[3253]	2885	if [ "`echo "$i" \| grep -E ".bz$"`" ]; then
	2886	bunzip2 -f $mountpoint/$i
	2887	fi
	2888	if [ "`echo "$i" \| grep -E ".xz$"`" ]; then
	2889	unxz -f $mountpoint/$i
	2890	fi
	2891	LogFile "INFO: Uncompressing $i"
	2892	done
	2893	fi
[1815]	2894
[2964]	2895	# Also copy modules.* in case of udev so that normal modprobe works
[3565]	2896	tar cf - -C / /$needed_modules_path/modules.* 2> $templog \| (cd "$mountpoint" ; tar xf -) \|\| LogAll "ERROR: Unable to copy modules.* to $mountpoint" $templog
[1815]	2897
[2680]	2898	# Copy FW in case some drivers needs it
[3163]	2899	for d in "/lib" "/usr/lib"; do
[3201]	2900	if [ -d "$d/firmware" -a ! -h $d ]; then
[3166]	2901	cp -a "$d/firmware" "$mountpoint/$d"
[3163]	2902	fi
	2903	done
[2680]	2904
[3163]	2905	# Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
	2906	for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
[3201]	2907	if [ -d "$d/multipath" -a ! -h $d ]; then
[3166]	2908	cp -a "$d/multipath" "$mountpoint/$d"
[3163]	2909	fi
	2910	done
	2911
[3326]	2912	# Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
[3479]	2913	(cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e "$mountpoint/bin/$i" ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done)
[3324]	2914
[2913]	2915	# Copy an additional ProLiant tool for OBDR support
	2916	if [ -f $MINDI_TMP/OBDR ]; then
[3117]	2917	found=0
[2913]	2918	if [ -x /usr/bin/hpsa_obdr_mode ]; then
	2919	mkdir -p $mountpoint/usr/bin
	2920	cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
[3565]	2921	LogAll "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
[3117]	2922	found=1
	2923	fi
	2924	if [ -x /usr/bin/sg_wr_mode ]; then
	2925	mkdir -p $mountpoint/usr/bin
[3135]	2926	lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
[3118]	2927	LocateDeps $lis > $MINDI_TMP/obdr.lis
[3565]	2928	tar cf - $lis -C / `sort -u $MINDI_TMP/obdr.lis` 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in obdr.lis analysis" $templog
	2929	LogAll "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
[3117]	2930	found=1
	2931	fi
	2932	if [ $found -eq 0 ]; then
	2933	LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
[2913]	2934	LogAll " This may lead to a tape not going back to sequential mode after OBDR boot"
	2935	fi
	2936	fi
	2937
[3499]	2938	if [ ! -e "/sbin/devfsd" ]; then
[2963]	2939	LogFile "INFO: Deleting devfsd daemon from ramdisk"
[2995]	2940	[ ! -e "/sbin/devfsd" ] && LogFile " ...because /sbin/devfsd not found"
[747]	2941	rm -f $mountpoint/sbin/devfsd
	2942	fi
	2943	[ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
[1885]	2944	if [ _"$MONDO_SHARE" != _"" ]; then
[3278]	2945	MakeMondoConfigFile $mountpoint/tmp/$MRCFG
	2946	cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE \|\| Die "Cannot copy $MRCFG to ramdisk"
[2092]	2947	cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE \|\| Die "Cannot copy mountlist to ramdisk"
[747]	2948	echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
	2949	echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
	2950	fi
[3310]	2951
	2952	# Create module list to load at restore time
	2953	rm -f $mountpoint/tmp/modules
	2954	for m in $CDROM_MODS; do
	2955	echo $m >> $mountpoint/tmp/modules
	2956	done
	2957
[747]	2958	mkdir -p $mountpoint/proc
[2963]	2959	LogFile "---------------------------"
[3372]	2960	LogFile "Size of initial ramdisk:"
	2961	LogFile "---------------------------"
	2962	(cd "$mountpoint" ; du -sh .) >> $LOGFILE
	2963	LogFile "---------------------------"
[2963]	2964	LogFile "Content of initial ramdisk:"
	2965	LogFile "---------------------------"
[2712]	2966	(cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
[2963]	2967	LogFile "---------------------------"
[2438]	2968
[1230]	2969	# Determine what filesystem to use for initrd image
[2963]	2970	LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
[1230]	2971	gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
	2972	[ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
[3008]	2973	if [ "$gvFileSystem" = "ext2fs" ] \|\| [ "$gvFileSystem" = "ext3fs" ] \|\| [ "$gvFileSystem" = "ext4fs" ]; then
[1230]	2974	# say what will be used
[2963]	2975	LogFile "INFO: Creating an $gvFileSystem initrd image..."
[1230]	2976	# kernel expects linuxrc in ext2 filesystem
[3522]	2977	(cd "$mountpoint" && ln -sf usr/sbin/init linuxrc)
[1230]	2978	# unmount loop filesystem and create image file using the standard approach
[3546]	2979	sync
[1230]	2980	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
[3522]	2981	dd if=$tempfile bs=1k of=${rdz_fname}.tmp > /dev/null 2> /dev/null
[3008]	2982	if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
	2983	bs=`/sbin/tune4fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
	2984	else
	2985	bs=`tune2fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
	2986	fi
[2564]	2987	MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
[1799]	2988	gzip -c9 ${rdz_fname}.tmp > $rdz_fname
[1764]	2989	rm -f ${rdz_fname}.tmp
[1230]	2990	# log that we are done
[2390]	2991	elif [ "$gvFileSystem" = "initramfs" ]; then
[1230]	2992	# say what will be used
[2963]	2993	LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
[1230]	2994	# make sure that cpio is there
	2995	which cpio &> /dev/null; [ $? -eq 0 ] \|\| Die "cpio not found. Please install package cpio and try again."
	2996	# kernel expects init in cpio filesystem
[3522]	2997	(cd "$mountpoint" ; ln -sf usr/sbin/init init)
[1230]	2998	# create cpio image file and unmount loop filesystem
[3524]	2999	(cd "$mountpoint" ; find . -print \| cpio -o -H newc 2> /dev/null \| gzip -9 > $rdz_fname)
[3546]	3000	sync
[1230]	3001	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
	3002	# log that we are done
[2390]	3003	else
[1230]	3004	Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
[2390]	3005	fi
	3006
[747]	3007	if [ "$res" -eq "0" ] ; then
[3525]	3008	LogAll "INFO: MakeBootInitFile finished without error."
[747]	3009	else
[3525]	3010	LogAll "WARNING: MakeBootInitFile exits WITH ERRORS."
[747]	3011	fi
	3012	return 0
	3013	}
	3014
	3015
	3016	##############################################################################
[1021]	3017	#----------------------------------- Main -----------------------------------#
[747]	3018	##############################################################################
	3019
[1885]	3020	# Now we can create what we need
	3021	mkdir -p $MINDI_TMP
[747]	3022
[2995]	3023	# --nolog needs to be first, and is used in analyze-my-lvm
	3024	if [ "$1" = "--nolog" ] ; then
	3025	shift
	3026	LOGFILE=/dev/stderr
	3027	else
	3028	> $LOGFILE
	3029	fi
[1885]	3030	if [ "$1" = "--printvar" ] ; then
	3031	shift
	3032	if [ _"$1" != _"" ] ; then
	3033	set \| grep -Ew "^$1" \| cut -d= -f2
	3034	fi
[2183]	3035	exit 0
[1885]	3036	fi
	3037
[2963]	3038	LogFile "mindi v$MINDI_VERSION"
[3513]	3039	LogFile "-----------------------------"
	3040	LogFile "Start date : `date`"
	3041	LogFile "-----------------------------"
[2963]	3042	LogFile "$ARCH architecture detected"
	3043	LogFile "mindi called with the following arguments:"
[2978]	3044	echo "$@">> $LOGFILE
[2963]	3045	LogFile "-----------------------------"
[3513]	3046	LogFile "pbdistrocheck results:"
	3047	pbdistrocheck >> $LOGFILE
	3048	LogFile "-----------------------------"
[747]	3049
[1010]	3050	# Log some capital variables
	3051	[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
[3149]	3052	[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
[2963]	3053	LogFile "MONDO_SHARE = $MONDO_SHARE"
	3054	LogFile "MINDI_LIB = $MINDI_LIB"
	3055	LogFile "MINDI_SBIN = $MINDI_SBIN"
	3056	LogFile "MINDI_CONF = $MINDI_CONF"
[3388]	3057	# Purge from potential old run
	3058	if [ _"$MINDI_CACHE" = _"" ]; then
	3059	Die "MINDI_CACHE undefined"
	3060	else
	3061	LogFile "MINDI_CACHE = $MINDI_CACHE"
	3062	fi
	3063
[1885]	3064	if [ -f $MINDI_CONFIG ]; then
[2963]	3065	LogFile "-----------------------------"
	3066	LogFile " Mindi configuration file "
	3067	LogFile "-----------------------------"
[1885]	3068	grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
[2963]	3069	LogFile "-----------------------------"
[1885]	3070	fi
[2995]	3071	LogFile "In Mindi"
	3072	LogFile "--------"
	3073	LogFile "EXTRA_SPACE = $EXTRA_SPACE"
	3074	LogFile "--------"
[1010]	3075
[747]	3076	trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
[1010]	3077
	3078	# Sanity checks
	3079	which which > /dev/null 2> /dev/null \|\| Die "Please install 'which'."
	3080	which strings > /dev/null 2> /dev/null \|\| Die "Please install binutils and libbinutils; you have no 'strings' executable."
	3081	which gawk > /dev/null 2> /dev/null \|\| Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
	3082	which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` \|\| AWK="`which awk 2>/dev/null`"
	3083	if which awk &> /dev/null ; then
	3084	if ! which gawk &> /dev/null ; then
[3565]	3085	LogAll "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
[1010]	3086	fi
	3087	fi
	3088	which mke2fs > /dev/null 2> /dev/null \|\| Die "Please put mke2fs in system path"
[2222]	3089	[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
[1010]	3090
[3005]	3091	[ "`echo $KERVERRUN \| grep -E "2\.4\.[0-6]" \| grep -vE "2\.4\.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
[1010]	3092
	3093	# Update the PATH variable if incomplete
	3094	if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
	3095	PATH=$PATH:/sbin:/usr/sbin
	3096	export PATH
[2963]	3097	LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
	3098	LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
[3255]	3099	LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
[1010]	3100	fi
	3101
[1737]	3102	if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
[3368]	3103	Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
[1010]	3104	fi
	3105
[3149]	3106	### TODO
[747]	3107	### Fix as it's not mandatory on ia64
	3108	if [ "$ARCH" = "ia64" ] ; then
[1010]	3109	if which elilo &> /dev/null ; then
	3110	LILO_EXE=elilo
	3111	else
[2024]	3112	LILO_EXE=`which false 2> /dev/null`
[1010]	3113	fi
[747]	3114	else
	3115	FindIsolinuxBinary
	3116	fi
	3117	trap "Aborted" SIGTERM
	3118	DONE="\r\t\t\t\t\t\t\t\tDone. "
	3119	kernelpath=""
[1010]	3120	MONDO_ROOT=/var/cache/mondo
[747]	3121	mkdir -p $MONDO_ROOT
	3122
	3123	if [ -d "/proc/lvm" ]; then
	3124	# LVM v1
	3125	LVMCMD=""
	3126	LVM="v1"
	3127	elif [ -d "/dev/mapper" ]; then
	3128	# LVM v2
	3129	LVMCMD="lvm"
	3130	LVM="v2"
	3131	else
	3132	LVM="false"
	3133	fi
[3149]	3134
	3135	if [ -e "/proc/cmdline" ]; then
	3136	CMDLINE="/proc/cmdline"
	3137	elif [ -e "/tmp/cmdline" ]; then
	3138	CMDLINE="/tmp/cmdline"
	3139	else
	3140	CMDLINE="/dev/null"
	3141	fi
	3142
[2963]	3143	LogFile "INFO: LVM set to $LVM"
	3144	LogFile "----------"
	3145	LogFile "mount result:"
	3146	LogFile "-------------"
[1230]	3147	mount >> $LOGFILE
[3479]	3148	if [ -e "/etc/raidtab" ]; then
[2963]	3149	LogFile "-------------"
	3150	LogFile "/etc/raidtab content:"
	3151	LogFile "-------------"
[1315]	3152	cat /etc/raidtab >> $LOGFILE
[3077]	3153	else
[3073]	3154	LogFile "No file /etc/raidtab"
[1315]	3155	fi
[3479]	3156	if [ -e "/etc/mdadm.conf" ]; then
[2981]	3157	LogFile "-------------"
	3158	LogFile "/etc/mdadm.conf content:"
	3159	LogFile "-------------"
	3160	cat /etc/mdadm.conf >> $LOGFILE
[3077]	3161	else
[3149]	3162	LogFile "-------------"
[3073]	3163	LogFile "No file /etc/mdadm.conf"
[2981]	3164	fi
[2963]	3165	LogFile "-------------"
[3149]	3166	LogFile "cat $CMDLINE"
[2963]	3167	LogFile "-------------"
[3149]	3168	cat $CMDLINE >> $LOGFILE
[2963]	3169	LogFile "-------------"
	3170	LogFile "cat /proc/swaps:"
	3171	LogFile "-------------"
[2014]	3172	cat /proc/swaps >> $LOGFILE
[2963]	3173	LogFile "-------------"
[3479]	3174	if [ -e "/proc/mdstat" ]; then
[3073]	3175	LogFile "cat /proc/mdstat:"
	3176	LogFile "-------------"
	3177	cat /proc/mdstat >> $LOGFILE
[3077]	3178	else
[3073]	3179	LogFile "No pseudo file /proc/mdstat"
	3180	fi
[2981]	3181	LogFile "-------------"
[2963]	3182	LogFile "cat /proc/partitions:"
	3183	LogFile "-------------"
[2015]	3184	cat /proc/partitions >> $LOGFILE
[2963]	3185	LogFile "-------------"
	3186	LogFile "cat /proc/filesystems:"
	3187	LogFile "-------------"
[2015]	3188	cat /proc/filesystems >> $LOGFILE
[2963]	3189	LogFile "-------------"
	3190	LogFile "lsmod result:"
	3191	LogFile "-------------"
[1021]	3192	lsmod >> $LOGFILE
[2431]	3193	MODULES="`cat /proc/modules \| $AWK '{print $1}'`"
[1531]	3194	if [ -x /usr/sbin/esxcfg-module ]; then
[2963]	3195	LogFile "-------------"
	3196	LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
	3197	LogFile "-------------"
	3198	LogFile "VMWare modules"
	3199	LogFile "-------------"
[1531]	3200	/usr/sbin/esxcfg-module -l >> $LOGFILE
[2431]	3201	MODULES="$MODULES `/usr/sbin/esxcfg-module -l \| $AWK '{print $1}'`"
[1497]	3202	fi
[3149]	3203	LogFile "-------------"
[2963]	3204	LogFile "FORCE_MODS:"
	3205	LogFile "-------------"
[3065]	3206	LogFile "$FORCE_MODS"
[2963]	3207	LogFile "-------------"
	3208	LogFile "DENY_MODS:"
	3209	LogFile "-------------"
[3065]	3210	LogFile "$DENY_MODS"
[2963]	3211	LogFile "-------------"
	3212	LogFile "df result:"
	3213	LogFile "----------"
[3117]	3214	df -aT >> $LOGFILE
[2963]	3215	LogFile "-------------"
[3117]	3216	LogFile "df -i result:"
	3217	LogFile "----------"
	3218	df -i >> $LOGFILE
	3219	LogFile "-------------"
	3220	if [ -r /boot/grub/menu.lst ]; then
	3221	LogFile "-------------"
	3222	LogFile "INFO: /boot/grub/menu.lst content"
	3223	LogFile "-------------"
	3224	cat /boot/grub/menu.lst >> $LOGFILE
[3123]	3225	LogFile "-------------"
[3117]	3226	fi
[3123]	3227	if [ -r /boot/grub/grub.conf ]; then
[3117]	3228	LogFile "-------------"
[3123]	3229	LogFile "INFO: /boot/grub/grub.conf content"
	3230	LogFile "-------------"
	3231	cat /boot/grub/grub.conf >> $LOGFILE
	3232	LogFile "-------------"
	3233	fi
	3234	if [ -r /boot/grub/grub.cfg ]; then
	3235	LogFile "-------------"
	3236	LogFile "INFO: /boot/grub/grub.cfg content"
	3237	LogFile "-------------"
	3238	cat /boot/grub/grub.cfg >> $LOGFILE
	3239	LogFile "-------------"
	3240	fi
	3241	if [ -r /boot/grub/device.map ]; then
	3242	LogFile "-------------"
[3117]	3243	LogFile "INFO: /boot/grub/device.map content"
	3244	LogFile "-------------"
[3123]	3245	cat /boot/grub/device.map >> $LOGFILE
	3246	LogFile "-------------"
[3117]	3247	fi
	3248	if [ -r /etc/lilo.conf ]; then
	3249	LogFile "-------------"
	3250	LogFile "INFO: /etc/lilo.conf content"
	3251	LogFile "-------------"
	3252	cat /etc/lilo.conf >> $LOGFILE
	3253	fi
[3378]	3254	if [ -d /boot/efi ]; then
[3425]	3255	gcf=`find /boot/efi -name 'grub.c*'`
[3384]	3256	if [ _"$gcf" = _"" ]; then
[3425]	3257	LogFile "Found a /boot/efi directory without a grub config file in it"
[3384]	3258	else
	3259	LogFile "-------------"
	3260	LogFile "INFO: $gcf content"
	3261	LogFile "-------------"
	3262	cat $gcf >> $LOGFILE
	3263	LogFile "-------------"
	3264	fi
[3378]	3265	fi
	3266
[3146]	3267	LogFile "Full fdisk info"
	3268	LogFile "---------------"
	3269	$FDISK -l >> $LOGFILE
	3270	LogFile "----------------"
[747]	3271
[1723]	3272	# Compute libata version
[2649]	3273	laver=`modinfo libata 2> /dev/null \| grep -Ei '^Version:' \| cut -d: -f2 \| cut -d. -f1 \| sed 's/ *//g' 2> /dev/null`
[1723]	3274	# If libata v2 is used then remove ide-generic as it will perturbate boot
[1726]	3275	if [ "`echo $MODULES \| grep libata`" ]; then
[1727]	3276	if [ "$laver" = "2" ]; then
[1726]	3277	DENY_MODS="$DENY_MODS ide-generic"
[2963]	3278	LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
	3279	LogFile "-------------"
[1726]	3280	fi
[1723]	3281	fi
	3282
[2963]	3283	# Check for McAfee which disturbs the access to some files (tgz in articular)
[2976]	3284	if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
[2963]	3285	LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
	3286	LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
	3287	LogFile "WARNING: You have two options:"
	3288	LogFile "WARNING: - Exclude all directories with special files (check McAfee System Events Log)"
	3289	LogFile "WARNING: - Disable the scanner during the backup"
	3290	fi
	3291
[1684]	3292	#
	3293	# If we have a USB device we need to store info
	3294	# and remove it from the parameters line
	3295	#
[747]	3296	if [ "$#" -ne "0" ] ; then
[1684]	3297	if [ "$1" = "--usb" ] ; then
	3298	shift
	3299	USBDEVICE=$1
	3300	if [ _"$USBDEVICE" = _"" ]; then
	3301	Die "No USB device specified"
	3302	fi
	3303	shift
	3304	fi
	3305	fi
	3306
	3307	if [ "$#" -ne "0" ] ; then
[747]	3308	if [ "$1" = "--findkernel" ] ; then
[2880]	3309	resk=`TryToFindKernelPath`
[1336]	3310	# Avoids logfile content for mondo
	3311	export MONDO_SHARE=""
[2880]	3312	if [ "$resk" = "" ] ; then
[2838]	3313	if [ $KERNEL_IS_XEN = "yes" ]; then
	3314	echo "$xenkernelpath"
[2963]	3315	LogFile "INFO: xenkernelpath = $xenkernelpath"
[2860]	3316	MindiExit 0
[2838]	3317	else
[2860]	3318	MindiExit -1
[2838]	3319	fi
[747]	3320	else
[2880]	3321	echo "$resk"
[2963]	3322	LogFile "INFO: kernelpath = $resk"
[2860]	3323	MindiExit 0
[747]	3324	fi
[1720]	3325	elif [ "$1" = "--locatedeps" ] ; then
	3326	[ ! "$2" ] && Die "Please specify the binary to look at"
[2438]	3327	LocateDeps $*
[1720]	3328	# Avoids logfile content for mondo
	3329	export MONDO_SHARE=""
	3330	MindiExit $?
[1815]	3331	elif [ "$1" = "--readalllink" ] ; then
	3332	[ ! "$2" ] && Die "Please specify the binary to look at"
	3333	# Avoids logfile content for mondo
	3334	export MONDO_SHARE=""
[3231]	3335	mr-read-all-link $2
[1815]	3336	MindiExit $?
[3518]	3337	elif [ "$1" = "--makebcf" ] ; then
[3520]	3338	[ ! "$2" ] && Die "Please specify the boot loader to check (syslinux, grub, grub2)"
[3518]	3339	MakeBootConfFile $2
[3519]	3340	MindiExit 0
[2731]	3341	elif [ "$1" = "--makemessage" ] ; then
[2948]	3342	MakeMessageFile \| cut -c1-80
[2731]	3343	MindiExit 0
[747]	3344	elif [ "$1" = "--makemountlist" ] ; then
	3345	[ ! "$2" ] && Die "Please specify the output file"
	3346	MakeMountlist $2
[2432]	3347	CheckMountlist $2
[1336]	3348	# Avoids logfile content for mondo
	3349	export MONDO_SHARE=""
[925]	3350	MindiExit $?
	3351	elif [ "$1" = "-V" ] \|\| [ "$1" = "-v" ] \|\| [ "$1" = "--version" ] \|\| [ "$1" = "-version" ] ; then
	3352	echo "Mindi v$MINDI_VERSION"
[1336]	3353	# Avoids logfile content for mondo
	3354	export MONDO_SHARE=""
[925]	3355	MindiExit 0
[3585]	3356	elif [ "$1" = "--ironic" ] ; then
	3357	[ ! "$2" ] && [ ! -f "$2" ] && Die "Please specify the kernel to use"
	3358	[ ! "$3" ] && [ ! -f "$3" ] && Die "Please specify the initramfs to use"
	3359	[ "$4" ] && [ "$4" != "UEFI" ] && [ "$4" != "BIOS" ] && Die "Please specify the boot mode as BIOS or UEFI"
	3360	#TODO: See how we can influence the boot loader
	3361	[ "$5" ] && [ "$5" != "isolinux" ] && [ "$5" != "grub" ] && [ "$5" != "grub2" ] && Die "Please specify the boot loader as isolinux or grub or grub2"
	3362	if [ "$5" ]; then
	3363	boottype=$5
	3364	fi
	3365	[ "$6" ] && [ ! -e "$6" ] && Die "Please specify an existing boot loader path for $boottype"
	3366	if [ "$6" ]; then
	3367	bootbin=$6
	3368	fi
	3369	kernelpath=$2
	3370	BOOT_TYPE=$4
	3371	bigdir=$MINDI_TMP/bigdir
[3590]	3372	# Ironic requires some specific boot parameters
[3588]	3373	MINDI_ADDITIONAL_BOOT_PARAMS="selinux=0 barrier=off udevtimeout=10 systemd.debug-shell boot_method=vmedia"
	3374	MINDI_BOOT_TIMEOUT=10
[3590]	3375	EXTRA_SPACE=1500000
	3376	# Get the local improvements to the configuration
[3589]	3377	if [ -f $MINDI_CONFIG ]; then
	3378	. $MINDI_CONFIG
	3379	fi
[3585]	3380	PrepareBootDir
	3381	PrepareAllTar
	3382	cp $3 $MINDI_TMP/initrd.img
	3383	MakeBootableDevice ISO
	3384	MindiExit 0
[747]	3385	elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
[940]	3386	MONDO_TMP=$2
	3387	# Change MINDI_TMP for the one provided by mondo
	3388	# So that it can get back the built files
[2153]	3389	if [ _"$MONDO_TMP" = _"" ]; then
	3390	Die "MONDO_TMP is empty, aborting"
	3391	fi
	3392	if [ _"$MONDO_TMP" = _"/" ]; then
	3393	Die "MONDO_TMP is /, aborting"
	3394	fi
[2092]	3395	mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
[1010]	3396	rmdir $MINDI_TMP
[1486]	3397	export MINDI_TMP=$MONDO_TMP
[953]	3398	mkdir -p $MINDI_TMP
[2238]	3399
[1696]	3400	# This is the scratch dir in mondo - subdir images
[1880]	3401	MINDI_CACHE=$3
[3388]	3402	LogFile "MINDI_CACHE = $MINDI_CACHE"
[2238]	3403
[925]	3404	kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
[2681]	3405	[ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
	3406
[747]	3407	###
	3408	### Sq-Modification...
	3409	### Attempt to locate kernel specific module path
	3410	### if module path is found then use it other wise use uname -r to set it...
	3411	###
[2629]	3412	if [ $KERNEL_IS_XEN = "yes" ]; then
[3149]	3413	LogAll "INFO: xenkernelpath = $xenkernelpath"
[2629]	3414	fi
[2657]	3415	kernelname=`echo $kernelpath \| cut -d'-' -f2- \| sed 's/.[bg]z[2]*$//'`
[3231]	3416	if [ ! -d "/lib/modules/$kernelname" ]; then
[3149]	3417	LogAll "WARNING: Module path for ${kernelpath} not found..."
	3418	LogAll " using running kernel\'s modules."
[2292]	3419	kernelname=$KERVERRUN
[3149]	3420	else
[3426]	3421	LogAll "INFO: Using modules for kernel: ${kernelname}"
[747]	3422	fi
[3149]	3423	LogAll "INFO: kernelname = $kernelname"
	3424	LogAll "INFO: kernelpath = $kernelpath"
[747]	3425	###
	3426	### end of Sq-Modification
	3427	###
[925]	3428	TAPEDEV=$5
	3429	TAPESIZE=$6
	3430	FILES_IN_FILELIST=$7
	3431	USE_LZO=$8
	3432	CDRECOVERY=$9
[747]	3433	if [ "${10}" = "(null)" ] \|\| [ "${10}" = "" ] ; then
	3434	IMAGE_DEVS=""
	3435	else
	3436	IMAGE_DEVS="`echo "${10}" \| tr '\|' ' '`"
	3437	fi
[925]	3438	if [ "${11}" ] ; then
	3439	LILO_OPTIONS=""
[3149]	3440	# LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
[925]	3441	fi
	3442	LAST_FILELIST_NUMBER=${12}
[747]	3443	ESTIMATED_TOTAL_NOOF_SLICES=${13}
[2564]	3444	export MINDI_EXCLUDE_DEVS="${14}"
[747]	3445	USE_COMP="${15}"
	3446	USE_LILO="${16}"
[925]	3447	USE_STAR="${17}"
	3448	INTERNAL_TAPE_BLOCK_SIZE="${18}"
[747]	3449	DIFFERENTIAL="${19}"
[998]	3450	USE_GZIP="${20}"
[3353]	3451	USE_LZMA="${21}"
	3452	NOT_BOOT="${22}"
[3397]	3453	BOOT_TYPE="${23}"
[747]	3454	[ "$USE_COMP" = "" ] && USE_COMP=yes
[998]	3455	[ "$USE_GZIP" = "" ] && USE_GZIP=no
[3353]	3456	[ "$USE_LZMA" = "" ] && USE_LZMA=no
[747]	3457	[ "$NOT_BOOT" = "" ] && NOT_BOOT=no
[3565]	3458	[ "$TAPEDEV" ] && LogAll "INFO: This is a tape-based backup. Fine."
[1696]	3459	# MONDO_ROOT is the real scratchdir
[1880]	3460	MONDO_ROOT=`echo $MINDI_CACHE \| sed 's/\(.\)\/./\1/'`
[938]	3461	if [ _"$MONDO_ROOT" != _"" ]; then
	3462	mkdir -p $MONDO_ROOT
	3463	else
	3464	Die "MONDO_ROOT is undefined"
	3465	fi
[747]	3466	else
[3585]	3467	LogScreen "Syntax: mindi [--custom ....MondoRescue parameters...]"
	3468	LogScreen " mindi --ironic kernel initrd [BIOS\|UEFI] [syslinux\|grub\|grub2] [/path/to/bootloader]"
	3469	LogScreen " mindi --locatedeps file"
	3470	LogScreen " mindi --makemessage"
[3586]	3471	LogScreen " mindi --findkernel"
[3585]	3472	LogScreen " mindi --makemountlist file"
	3473	LogScreen " mindi --makebcf bootloader"
	3474	LogScreen " mindi -V"
[925]	3475	MindiExit -1
[747]	3476	fi
	3477	fi
[2238]	3478
	3479	if [ _"$MINDI_CACHE" != _"" ]; then
	3480	rm -rf $MINDI_CACHE/* 2> /dev/null
	3481	mkdir -p $MINDI_CACHE
	3482	fi
	3483
[747]	3484	[ "$CDRECOVERY" = "yes" ] \|\| CDRECOVERY=no
	3485
[1684]	3486	if [ _"$MONDO_SHARE" = _"" ]; then
[3565]	3487	LogAll "Mindi Linux mini-distro generator v$MINDI_VERSION"
	3488	LogAll "Latest Mindi is available from http://www.mondorescue.org"
	3489	LogAll "BusyBox sources are available from http://www.busybox.net"
	3490	LogAll "------------------------------------------------------------------------------"
[747]	3491	else
[3426]	3492	LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
[747]	3493	fi
[3231]	3494	if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
[3565]	3495	LogAll "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 \| head -1`"
[1005]	3496	else
[3565]	3497	LogAll "ERROR: Unable to find mindi-busybox, please install it"
[1005]	3498	MindiExit -1
	3499	fi
[747]	3500
	3501	for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
[3111]	3502	modinfo $i 2> /dev/null 1> /dev/null
[3014]	3503	if [ $? -eq 0 ]; then
	3504	modprobe $i 2>&1 > /dev/null
	3505	fi
[747]	3506	done
	3507
[2963]	3508	LogFile "DIFFERENTIAL = $DIFFERENTIAL"
	3509	LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
	3510	LogFile "NOT_BOOT = '$NOT_BOOT'"
[747]	3511	if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
[3565]	3512	LogAll "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
[3278]	3513	MakeMondoConfigFile $MINDI_TMP/$MRCFG
[940]	3514	MakeMountlist $MINDI_TMP/mountlist.txt
[2432]	3515	CheckMountlist $MINDI_TMP/mountlist.txt
[940]	3516	mkdir -p $MINDI_TMP/small-all/tmp
[3565]	3517	cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} $MINDI_TMP/small-all/tmp 2>> $LOGFILE \|\| Die "Cannot copy small all.tar.gz"
	3518	(cd $MINDI_TMP/small-all ; tar -cv ./tmp \| gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log \|\| Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log)
[747]	3519	sleep 2
[3565]	3520	LogAll "Done. Exiting."
[925]	3521	MindiExit 0
[747]	3522	fi
	3523
[1690]	3524	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[3565]	3525	LogAll "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
[1684]	3526	fi
	3527
[747]	3528	if [ "$kernelpath" = "" ] ; then
[1335]	3529	[ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
[3522]	3530	echo -en "\nDo you want to use your own kernel to build the boot disk ([y]/n) ?"
[966]	3531	read ch
	3532	if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
	3533	USE_OWN_KERNEL="yes"
[1809]	3534	else
	3535	USE_OWN_KERNEL="no"
[747]	3536	fi
	3537	if [ "$USE_OWN_KERNEL" = "yes" ]; then
[925]	3538	kernelpath=`TryToFindKernelPath`
	3539	if [ "$kernelpath" = "" ] ; then
	3540	echo -n "Please enter kernel path : "
	3541	read kernelpath
	3542	fi
[747]	3543	fi
	3544	fi
[3231]	3545
[1880]	3546	echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
[3565]	3547	[ "$(($RANDOM%64))" -eq "0" ] && LogAll "INFO: Dude, I've looked inside your computer and it's really dusty..."
[747]	3548
[3248]	3549	mountpoint=$MINDI_TMP/mountpoint.$$
[1983]	3550	PrepareDataDiskImages
	3551
[3522]	3552	MakeBootInitFile $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath \| cut -f1` \|\| Die "Could not create initrd.img"
	3553
[747]	3554	[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
	3555	...Or type 'memtest' to test your PC's RAM thoroughly.\n"
	3556
[1684]	3557	if [ _"$MONDO_SHARE" = _"" ]; then
[1983]	3558	OfferToMakeBootableISO
[1684]	3559	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
[1983]	3560	OfferToMakeBootableUSB
[1684]	3561	fi
[3522]	3562	LogAll "INFO: Mindi Finished"
[747]	3563	elif [ "$TAPEDEV" ] ; then
[2078]	3564	if [ "$ARCH" != "ia64" ] ; then
	3565	# We need to keep the img file as boot file for ia64 platform
	3566	rm -f $MINDI_CACHE/{img,iso}
	3567	else
	3568	rm -f $MINDI_CACHE/*iso
	3569	fi
[1898]	3570	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	3571	OfferToMakeBootableUSB
[1898]	3572	fi
[1983]	3573	OfferToMakeBootableISO
[1880]	3574	if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
	3575	cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
[747]	3576	else
[925]	3577	Die "Cannot find all.tar.gz, to be written to tape"
[747]	3578	fi
[1695]	3579	elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	3580	OfferToMakeBootableUSB
[747]	3581	else
[1983]	3582	OfferToMakeBootableISO
[747]	3583	fi
[3391]	3584
[3396]	3585	if [ -f $MINDI_TMP/$MRCFG ]; then
[3425]	3586	LogFile "INFO: Your $MRCFG file is:"
	3587	LogFile "--------------------------"
	3588	cat $MINDI_TMP/$MRCFG >> $LOGFILE
	3589	LogFile "--------------------------"
[3391]	3590	else
[3421]	3591	if [ _"$MONDO_SHARE" != _"" ] ; then
[3565]	3592	LogAll "ERROR: You don't have a $MRCFG file !"
[3421]	3593	fi
[3391]	3594	fi
[747]	3595	# cleanup
[925]	3596	MindiExit 0

Note: See TracBrowser for help on using the repository browser.

Download in other formats: