Context Navigation

source: MondoRescue/branches/3.2/mindi/mindi@ 3565

Visit:

Last change on this file since 3565 was 3565, checked in by Bruno Cornec, 8 years ago
Check that ll rm are now executed from a subdirectory context to avoid erasing files if launched from / (due to previous modification to suppress old_pwd some remaining commands were not protected) Check that all cd are done in a subshell Rename LogIt into LogAll
Property svn:executable set to ``* Property svn:keywords set to `Rev Id`
File size: 124.3 KB

Rev	Line
[747]	1	#!/bin/bash
	2
	3	# $Id: mindi 3565 2016-04-13 09:59:30Z bruno $
	4	#
	5	#-----------------------------------------------------------------------------
	6	# mindi - mini-Linux distro based on the user's filesystem & distribution
	7	#
[1880]	8	# Mindi can create a multi-image boot/root kit. The first image is the boot
[747]	9	# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
	10	# the third disk is data disk #2; and so it goes.
	11	#
	12	# See http://www.mondorescue.org for details.
	13	#-----------------------------------------------------------------------------
	14
	15	### Which arch are we on (useful for ia64 port)
[1565]	16	ARCH=`/bin/uname -m`
[2292]	17	KERVERRUN=`/bin/uname -r`
	18	# By default we use the running kernel as a reference
	19	KERVER=$KERVERRUN
[747]	20
[2442]	21	# In case of problem with udev you can try to add udevdebug
[2564]	22	MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
[3053]	23	MINDI_DEFAULT_BOOT_OPTION="interactive"
	24	# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
	25	# So this parameter only applies to non CD recovery.
	26	MINDI_BOOT_TIMEOUT="300"
[747]	27
[1691]	28	MINDI_REV=PBREV
	29	MINDI_VER=PBVER
[747]	30
	31	MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
	32	MINDI_PREFIX=XXX
	33	MINDI_CONF=YYY
	34	MINDI_SBIN=${MINDI_PREFIX}/sbin
[934]	35	MINDI_LIB=LLL
[3149]	36	MINDI_CACHE=/var/cache/mindi
[747]	37
[3278]	38	MRCFG=mondorestore.cfg
	39
[925]	40	# Temporary directory for mindi
[3499]	41	TMPDIR=${TMPDIR:=/tmp}
	42	if [ ! -d $TMPDIR ]; then
	43	mkdir -p $TMPDIR
	44	fi
[925]	45
[3522]	46	EXTRA_SPACE=150000 # increase if you run out of ramdisk space
[747]	47
	48	PROMPT_MAKE_CD_IMAGE="yes"
	49	# Ask if you want to make a CD Image to be written?
[3522]	50	# if this is set to 'no' in the conf file, then the image will be created automatically
[747]	51
[1684]	52	PROMPT_MAKE_USB_IMAGE="yes"
	53	# Ask if you want to make a USB Image to be written?
[3522]	54	# if this is set to 'no' in the conf file, then the image will be created automatically
[1684]	55
[966]	56	USE_OWN_KERNEL="yes"
[747]	57	# If set to "no", you will be prompted for whether or not
	58	# you want to use your own kernel, or the supplied default.
	59	# If "yes" mindi will automatically use your own kernel.
[925]	60
[2629]	61	KERNEL_IS_XEN="no"
	62	# If set to "no", the kernel is not a Xen kernel
	63	# If "yes", mindi will modify isolinux.cfg for the Xen kernel.
[2880]	64	xenkernelpath=""
[2629]	65
[747]	66	MY_FSTAB=/etc/fstab
	67	TAPE_MODS="ht st osst ide-tape ide_tape"
[3540]	68	SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa hpdsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
[747]	69
	70	# ide-probe-mod
[3463]	71	IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc"
[747]	72	PCMCIA_MODS="pcmcia_core ds yenta_socket"
[3474]	73	USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
[3446]	74	NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
[3517]	75	CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 nls_cp437 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs nls_utf8"
[1230]	76	# Replace with that line for HP OCMP e.g.
[2073]	77	#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
[3055]	78	DENY_MODS="kqemu vxfen"
[1399]	79	# Force some modules to be included
[1354]	80	FORCE_MODS=""
[925]	81
[747]	82	LOGFILE=/var/log/mindi.log
	83	BOOT_MEDIA_MESSAGE="\
[3173]	84	To format and restore all files automatically, type '0enuke07' <enter>.\n\
	85	To restore some/all files interactively, type '0einteractive07' <enter>.\n\
	86	To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
	87	To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
	88	\n\
	89	You may add one or more parameters as well as per the function keys below\n\
	90	e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
	91	\n\
	92	If restoring from a local external disk or USB key, do not connect it \n\
	93	until the boot-up has finished.\n\
	94	\n\
	95	\n0eF107-Main \| Boot Parameters 0eF207-1/2 \| 0eF307-2/2 \| 0eF407-PXE\n\
[747]	96	"
[3377]	97	FDISK=$MINDI_SBIN/mr-parted2fdisk
[747]	98
[925]	99	# Using a config file allow to overwrite some values
	100	MINDI_CONFIG="$MINDI_CONF/mindi.conf"
	101	if [ -f $MINDI_CONFIG ]; then
	102	. $MINDI_CONFIG
	103	fi
[1885]	104	DEPLIST_FILE="$MINDI_CONF/deplist.txt"
[2409]	105	DEPLIST_DIR="$MINDI_CONF/deplist.d"
	106
[3502]	107	# Debian 8 system e.g. use xorriso for UEFI support.
	108	# However, they use exactly the same command line parameters as mkisofs, so just
	109	# use it if it's available.
	110	ISO_CMD="/usr/bin/xorriso"
	111
	112	# Mandriva system e.g. use cdrkit, which uses genisoimage.
	113	# However, they use exactly the same command line parameters as mkisofs, so just
	114	# use it if it's available.
	115	if [ ! -x $ISO_CMD ]; then
[3505]	116	ISO_CMD="/usr/bin/genisoimage"
[3515]	117	# For compatibility with previous versions default to mkisofs
	118	if [ ! -x $ISO_CMD ]; then
	119	ISO_CMD="/usr/bin/mkisofs"
	120	fi
	121	if [ ! -x $ISO_CMD ]; then
	122	LogFile "NOTE: No CD image (ISO file) utility found"
	123	ISO_CMD = ""
	124	fi
	125	else
	126	ISO_CMD="/usr/bin/xorriso -as mkisofs"
[3502]	127	fi
	128
[3534]	129	ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi -V Mindi_Image -o $MINDI_CACHE/mindi.iso "
[925]	130
[3421]	131	# Mindi set this as default in case it's invoked alone
	132	BOOT_TYPE="BIOS"
	133	# and we also check whether we're UEFI or not.
	134	if [ -d "/sys/firmware/efi" ]; then
	135	BOOT_TYPE="UEFI"
[3429]	136	else
	137	# Find MBR in case of bootable USB device to build
	138	MBRFILE=/usr/lib/syslinux/mbr.bin
	139	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
	140	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
	141	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
	142	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
[3421]	143	fi
[3403]	144
[2880]	145	# Function to log on screen only
	146	LogScreen() {
[3368]	147	if [ -e /dev/stderr ] ; then
	148	echo -e "$1" >> /dev/stderr
	149	elif [ -e /usr/bin/logger ] ; then
	150	/usr/bin/logger -s $1
	151	fi
[2880]	152	}
[2685]	153
[2880]	154	# Function to log in log file only
	155	LogFile() {
	156
[3368]	157	echo -e "$1" >> $LOGFILE
	158	if [ _"$2" != _"" ]; then
[3403]	159	grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
[3432]	160	rm -f "$2"
[3368]	161	fi
[2880]	162	}
	163
	164	# Function to log in both screen and logfile
	165	LogAll() {
[3368]	166	LogScreen "$1"
	167	LogFile "$1" "$2"
[2880]	168	}
	169
[2963]	170	# Last function called before exiting
	171	# Parameter is exit code value
	172	# Should be declared here as used immediately below potentialy
	173	MindiExit() {
[3522]	174	LogFile "INFO: Mindi $MINDI_VERSION is exiting"
	175	LogFile "INFO: End date : `date`"
[2963]	176	if [ _"$MONDO_SHARE" != _"" ] ; then
	177	echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
[2995]	178	if [ -f $LOGFILE ]; then
	179	cat $LOGFILE >> /var/log/mondoarchive.log
	180	else
	181	echo "No LOGFILE available in that mindi run" >> /var/log/mondoarchive.log
	182	fi
[2963]	183	echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
	184	fi
[2880]	185
[2963]	186	cd /
	187	sync&
	188
	189	# Clean temporary files only when standalone mindi
	190	if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
	191	rm -Rf $MINDI_TMP
	192	fi
	193	exit $1
	194	}
	195
[2685]	196	Die() {
	197	local i
	198	if [ "$1" = "" ] ; then
[3149]	199	LogAll "FATAL ERROR"
[2685]	200	else
[3149]	201	LogAll "FATAL ERROR. $1"
[2685]	202	fi
	203	if [ _"$2" != _"" ]; then
[3403]	204	grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
[2685]	205	fi
	206	rm -f "$2"
	207
[3149]	208	LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
	209	LogAll "See http://www.mondorescue.org for more information."
	210	LogAll "WE CANNOT HELP unless you enclose that file.\n"
[2685]	211	MindiExit -1
	212	}
	213
[1485]	214	# Now we can create what we need
[2150]	215	MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
	216	if [ $? -ne 0 ]; then
	217	df $TMPDIR
	218	Die "Unable to create a temporary directory ! Check space on $TMPDIR"
	219	fi
[2153]	220	if [ _"$MINDI_TMP" = _"" ]; then
	221	Die "MINDI_TMP is empty, aborting"
	222	fi
	223	if [ _"$MINDI_TMP" = _"/" ]; then
	224	Die "MINDI_TMP is /, aborting"
	225	fi
[2150]	226	export MINDI_TMP
[940]	227
[747]	228	# ----------------------------------------------------------------------------
	229
	230
	231	AbortHere() {
[3546]	232	[ "$mountpoint" ] && sync && umount $mountpoint 2>> $LOGFILE
[747]	233	Die "Program is terminating in response to signal received from OS/user"
	234	}
	235
	236
	237	Aborted() {
	238	trap SIGHUP SIGTERM SIGTRAP SIGINT
[1880]	239	[ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindiimg $MINDI_CACHE/gz $MINDI_CACHE/mindi.iso
[747]	240	Die "User abort."
	241	}
	242
	243
	244	AddFileToCfgIfExists() {
	245	[ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
	246	}
	247
	248
	249	AddKeyboardMappingFile() {
	250	local mappath r included_list included_item i res ii sss
	251	mappath=$1
	252	KBDEPTH=$(($KBDEPTH+1))
	253	[ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
	254	if [ -e "$bigdir/$mappath" ] ; then
[3149]	255	LogFile "INFO: $mappath already added"
[747]	256	return
	257	elif [ -d "$bigdir/$mappath" ] ; then
	258	echo "Cannot add $mappath: it's a directory. Sorry."
	259	return
	260	fi
[3149]	261	LogFile "INFO: Added kbd map $mappath"
[747]	262	if [ ! -e "$mappath" ] ; then
[3149]	263	mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[747]	264	if [ ! -e "$mappath" ] ; then
[3149]	265	LogAll "WARNING: Cannot add $mappath: kbd map file not found"
[747]	266	return
	267	fi
	268	fi
	269
[3149]	270	tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log \| (cd "$bigdir" ; tar xf -) \|\| LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
[747]	271	if [ "`echo $mappath \| grep -F ".gz"`" ] ; then
[3023]	272	included_list=`gzip -dc $mappath \| grep -Fi include \| sed s/'"'//g \| cut -d' ' -f2`
[747]	273	else
[3023]	274	included_list=`grep -Fi include $mappath \| sed s/'"'//g \| cut -d' ' -f2`
[747]	275	fi
	276	for included_item in $included_list ; do
[925]	277	if [ ! -e "$included_item" ] ; then
[3149]	278	sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
[1764]	279	[ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
[925]	280	for ii in $sss ; do
[3546]	281	[ -e "$ii" ] && AddKeyboardMappingFile $ii
[925]	282	done
	283	else
	284	AddKeyboardMappingFile $included_item
	285	fi
[747]	286	done
	287	}
	288
	289
	290	CopyDependenciesToDirectory() {
[3403]	291	local outdir incoming counter d found tdir templog
[747]	292	outdir=$1
[3403]	293	templog=$MINDI_TMP/$$.log
[747]	294	mkdir -p $outdir
	295	incoming=`ReadLine`
[3522]	296	counter=$3
[3403]	297	> $templog
	298
[747]	299	while [ "$incoming" != "" ] ; do
[3522]	300	if [ "$3" = "1" ]; then
	301	counter=$(($counter+1))
	302	LogProgress $counter $2
	303	fi
[1526]	304	# Non absolute file names should not arrive till here => skipped
	305	if [ `echo "$incoming" \| cut -c1` != '/' ]; then
[3149]	306	LogAll "WARNING: Unable to handle $incoming"
[1526]	307	incoming=`ReadLine`
	308	continue
	309	fi
	310	# no parent directory of incoming should be a link, copy is not possible in that case
	311	d=`dirname "$incoming"`
	312	found="false"
	313	while [ $d != "/" -a $found = "false" ]; do
	314	[ -h "$d" ] && found="true"
	315	d=`dirname "$d"`
	316	done
[3166]	317	if [ -d "$incoming" -a ! -h "$incoming" ]; then
[3522]	318	find $incoming/* -maxdepth 0 2> /dev/null \| CopyDependenciesToDirectory $outdir 0 0
[1526]	319	elif [ -e "$incoming" ] && [ $found = "false" ]; then
[3075]	320	if [ ! -h "$incoming" ]; then
[3405]	321	tar cf - -C / $incoming 2> $templog \| (cd "$outdir" ; tar xf -) \|\| Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
[3075]	322	else
	323	tdir=`dirname "$incoming"`
	324	if [ ! -e "$outdir/$tdir" ]; then
	325	mkdir -p "$outdir/$tdir"
	326	fi
	327	cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
	328	fi
[1989]	329	# Only uncompress modules if not using udevd
	330	if [ "`echo "$incoming" \| grep "lib/modules/.\..o\.gz"`" != "" ] && [ "`ps auxww \| grep -v grep \| grep -qw udevd`" != "" ]; then
[3149]	331	gunzip -f $outdir/$incoming \|\| LogAll "WARNING: Cannot gunzip $outdir/$incoming"
[925]	332	fi
[3075]	333	[ -x "$outdir" ] && StripExecutable $outdir
[747]	334	fi
	335	incoming=`ReadLine`
	336	done
	337	}
	338
	339
	340	CountItemsIn() {
	341	local r
	342	r=0
	343	for q in $1 ; do
	344	r=$(($r+1))
	345	done
	346	echo $r
	347	}
	348
	349
	350	DropOptimizedLibraries() {
	351	local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
	352	filelist=$1
	353	outdir=$2
	354
	355	list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
	356	if [ "$list_of_optimized_libraries" = "" ] ; then
[859]	357	return 0
[747]	358	fi
	359	echo -en "Dropping i686-optimized libraries if appropriate"
	360	for optimized_lib_name in $list_of_optimized_libraries ; do
[859]	361	echo -en "."
	362	reason=""
[1483]	363	vanilla_lib_name=`echo "$optimized_lib_name" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
[859]	364	echo "$vanilla_lib_name" >> $filelist
[2963]	365	LogFile "INFO: Adding $vanilla_lib_name to filelist"
[859]	366	mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
	367	rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
[2168]	368
	369	# This may return multiple files
[3231]	370	for resolved in `mr-read-all-link $vanilla_lib_name`; do
[2963]	371	LogFile "INFO: Adding as deps $resolved to filelist"
[2168]	372	vanilla_resolved_name=`echo "$resolved" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
[3149]	373	if [ "$vanilla_resolved_name" != "$resolved" ]; then
	374	mkdir -p $outdir$resolved> /dev/null 2> /dev/null
	375	rmdir $outdir$resolved > /dev/null 2> /dev/null
	376	ln -sf $vanilla_resolved_name $outdir$resolved
	377	LogFile "INFO: Excluding deps $resolved"
	378	grep -Fvx "$resolved" "$filelist" > $filelist.tmp
	379	LogFile "INFO: Replacing it with $vanilla_resolved_name"
	380	echo "$vanilla_resolved_name" >> $filelist.tmp
	381	mv -f $filelist.tmp $filelist
	382	fi
[2168]	383	done
[747]	384	done
[925]	385	$AWK '{ print $1; }' $filelist \| sort -u > $filelist.tmp
[747]	386	mv -f $filelist.tmp $filelist
	387	echo -e "$DONE"
	388	}
	389
	390
	391	FindAndAddUserKeyboardMappingFile() {
	392	local r res mapfile mappath included_item included_list keyfile mp locale
[3149]	393	LogAll "INFO: Analyzing your keyboard's configuration."
[3231]	394	KEYDIR=/usr/lib/kbd
[747]	395	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
[3347]	396	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
	397	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
[3231]	398	[ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
[747]	399	if [ ! -e "$KEYDIR" ] ; then
[3149]	400	LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
[747]	401	return 0
	402	fi
	403	if [ -e "/etc/sysconfig/keyboard" ] ; then
[2963]	404	LogFile "INFO: Red Hat-style config detected."
[747]	405	keyfile=/etc/sysconfig/keyboard
[3257]	406	elif [ -e "/etc/vconsole.conf" ] ; then
	407	LogFile "INFO: New Fedora style config detected."
	408	keyfile=/etc/vconsole.conf
[747]	409	elif [ -e "/etc/rc.d/rc.keymap" ] ; then
[2963]	410	LogFile "INFO: Slackware-style config detected."
[747]	411	keyfile=/etc/rc.d/rc.keymap
	412	elif [ -e "/etc/rc.config" ] ; then
[2963]	413	LogFile "INFO: Debian-style config detected."
[747]	414	keyfile=/etc/rc.config
	415	elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
[2963]	416	LogFile "INFO: Debian-style config detected."
[747]	417	mkdir -p $bigdir/tmp
[3278]	418	echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
[747]	419	KBDEPTH=0
	420	mkdir -p $bigdir/etc/console
[963]	421	cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
[2864]	422	echo ""
[747]	423	echo -e "$DONE"
	424	return 0
[2828]	425	elif [ -e "/etc/console-setup/boottime.kmap.gz" ] \|\| [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
[2963]	426	LogFile "INFO: Ubuntu-style config detected."
[1713]	427	mkdir -p $bigdir/tmp
[2828]	428	if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
	429	kbdfile="/etc/console-setup/boottime.kmap.gz"
	430	else
	431	kbdfile="/etc/console-setup/cached.kmap.gz"
	432	fi
[3278]	433	echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
[1713]	434	KBDEPTH=0
	435	mkdir -p $bigdir/etc/console-setup
[2828]	436	cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
[2864]	437	echo ""
[1713]	438	echo -e "$DONE"
	439	return 0
[2744]	440	elif [ -e "/etc/rc.conf" ] ; then
[2963]	441	LogFile "INFO: ArchLinux config detected."
[2744]	442	keyfile=/etc/rc.conf
[1465]	443	elif [ -e "/etc/conf.d/keymaps" ] ; then
[2963]	444	LogFile "INFO: Gentoo-style config detected."
[1465]	445	keyfile=/etc/conf.d/keymaps
[3191]	446	elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
	447	LogFile "INFO: X11-style config detected."
	448	keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
[747]	449	else
[3149]	450	LogFile "Searching for rc.config ..."
[747]	451	keyfile=`find /etc -name rc.config \| head -n1`
	452	if [ "$keyfile" = "" ] \|\| [ ! -e "$keyfile" ] ; then
[3149]	453	LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
[747]	454	return
	455	else
[2963]	456	LogFile "INFO: Found $keyfile"
[747]	457	fi
	458	fi
	459	if [ ! -e "$KEYDIR/keymaps" ] ; then
[3149]	460	LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
[747]	461	return
	462	fi
[2963]	463	LogFile "INFO: keyfile=$keyfile"
[2999]	464	# For SLES we need to remove the .map.gz extension Cf #614
	465	locale=`grep -F KEYTABLE "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2 \| sed 's/.map.gz$//'`
[747]	466	[ ! "$locale" ] && locale=`grep '.map$' "$keyfile" \| sed 's/^.* //'` # Slackware
[3257]	467	[ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2` # Gentoo, ArchLinux & New fedora
[3191]	468	[ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" \| grep -v '^#' \| awk '{print $3}' \| tr -d '"'` # Fedora 19
[2963]	469	LogFile "INFO: locale=$locale"
[1764]	470	#
	471	# Process the keymaps dir once for all
	472	# AddKeyboardMappingFile will use it recursively
	473	#
	474	find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
	475	mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep -F "/${locale}." \| grep -vx " #."`
	476	[ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[747]	477	# If we have multiple keymaps then log it !!
[3149]	478	echo "$mp" \| grep -q " " >> $LOGFILE
[747]	479	if [ $? -eq 0 ]; then
[2963]	480	LogAll "WARNING: Multiple keymaps found: $mp"
	481	LogFile "INFO: The following one will be used"
[747]	482	fi
	483	for i in $mp ; do
	484	mappath=$i
	485	[ -e "$i" ] && [ ! -d "$i" ] && break
	486	done
	487	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[2958]	488	mappath=$(find / -wholename "/kbd/keymaps//$locale \| head -1")
[747]	489	fi
[2963]	490	LogFile "INFO: mappath = $mappath"
[747]	491	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[3149]	492	LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
[747]	493	return
	494	fi
[3535]	495	echo -en "INFO: Adding keyboard mapping tables"
[747]	496	mkdir -p $bigdir/tmp
[3278]	497	echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
[2055]	498	KBDEPTH=0
[747]	499	AddKeyboardMappingFile $mappath
[2864]	500	echo ""
[747]	501	echo -e "$DONE"
[1764]	502	rm -f $MINDI_TMP/keymaps.find
[747]	503	return 0
	504	}
	505
	506
[3241]	507	FindLdlinux32Binary() {
	508	LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
	509	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
	510	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
	511	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
	512	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
[3303]	513	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
	514	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
[3241]	515	#[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 \| grep -x "/.*/ldlinux.c32"`
	516	if [ ! -e "$LDLINUXC32" ]; then
	517	LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
	518	LDLINUXC32=/tmp/idoesnthopefullyexist
	519	else
	520	LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
	521	fi
	522	}
	523
	524
[2629]	525	FindMboot32Binary() {
	526	MBOOTC32=/usr/lib/syslinux/mboot.c32
	527	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
	528	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
	529	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
	530	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
[3303]	531	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
	532	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
[2629]	533	[ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 \| grep -x "/.*/mboot.c32"`
[2921]	534	[ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[2963]	535	LogFile "INFO: Found mboot.c32 at $MBOOTC32"
[2629]	536	}
	537
[3476]	538	FindLdlinuxe64Binary() {
	539	LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
	540	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
	541	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
	542	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
	543	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
	544	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
	545	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 \| grep -x "/.*/ldlinux.e64"`
	546	[ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
	547	LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
	548	}
	549
	550	FindSyslinux64EFI() {
	551	SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
	552	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
	553	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
	554	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
	555	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
	556	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
	557	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi \| grep -x "/.*64/syslinux.efi"`
[3491]	558	[ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[3476]	559	LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
	560	}
	561
[747]	562	FindIsolinuxBinary() {
	563	ISOLINUX=/usr/lib/isolinux.bin
	564	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
[1491]	565	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
[747]	566	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
	567	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
[1491]	568	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
[3304]	569	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
[1854]	570	[ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin \| grep -x "/.*/isolinux.bin"`
[2921]	571	[ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[2963]	572	LogFile "INFO: Found isolinux.bin at $ISOLINUX"
[747]	573	}
	574
	575
	576	GenerateGiantDependencyList() {
[3522]	577	local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item tempdepfile modres noof_lines lvmversion lvmresolved
[747]	578
[3522]	579	echo -en "INFO: Analyzing dependency requirements"
[747]	580	outfile=$1
[940]	581	tempfile=$MINDI_TMP/$$.txt
[747]	582	incoming=`ReadLine`
	583
	584	> $tempfile
	585	progress=0
	586	res=0
	587	noof_lines=$2
	588	while [ "$incoming" != "" ] ; do
[861]	589	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	590	incoming=`ReadLine`
	591	continue
	592	fi
	593	if [ "$incoming" = "LVMFILES:" ] ; then
	594	break
	595	fi
[747]	596	filelist=`GenerateListForFile "$incoming"`
	597	r=$?
[3149]	598	[ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
[747]	599	res=$(($res+$r))
[2963]	600	# LogFile "INFO: '$incoming' generates filelist '$filelist'"
[747]	601	for fname in $filelist ; do
[3321]	602	[ "$fname" != "" ] && echo "$fname" >> $tempfile
[747]	603	done
	604	progress=$(($progress+1))
[3149]	605	LogProgress $progress $noof_lines
[747]	606	incoming=`ReadLine`
	607	done
[861]	608	if [ "$incoming" = "LVMFILES:" ] ; then
	609	incoming=`ReadLine`
	610	lvmversion=""
	611	while [ "$incoming" != "" ] ; do
	612	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	613	incoming=`ReadLine`
	614	continue
	615	fi
	616	filelist=`GenerateListForFile "$incoming"`
	617	for tool in $filelist ; do
	618	lvmresolved=`readlink -f $tool`
[1342]	619	if [ "$tool" = "$lvmresolved" ]; then
[861]	620	echo "$tool" >> $tempfile
	621	elif echo "$lvmresolved" \| grep "lvmiopversion" &> /dev/null ; then
	622	if [ "$lvmversion" = "" ] ; then
	623	lvmversion=`$lvmresolved`
	624	echo "$lvmresolved" >> $tempfile
	625	fi
	626	toolstripped=`echo $tool \| $AWK -F / '{print $NF;}'`
[1342]	627	if [ "$lvmversion" = "200" ]; then
[861]	628	# pvdata and lvmcreate_initrd don't exist in LVM2
	629	case "$toolstripped" in
	630	"pvdata")
	631	continue
	632	;;
	633	"lvmcreate_initrd")
	634	continue
	635	;;
	636	esac
	637	fi
	638	toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
	639	if [ -e "$toolpath" ] ; then
	640	echo "$toolpath" >> $tempfile
	641	echo "$tool" >> $tempfile
	642	else
	643	toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
	644	fi
	645	if [ -e "$toolpath" ] ; then
	646	echo "$toolpath" >> $tempfile
	647	echo "$tool" >> $tempfile
	648	else
	649	echo "Where are your LVM-Tools? Couldn't find $tool"
	650	fi
	651	else
	652	echo "$tool" >> $tempfile
	653	fi
	654	done
	655	progress=$(($progress+1))
[3149]	656	LogProgress $progress $noof_lines
[861]	657	incoming=`ReadLine`
	658	done
[747]	659	fi
[3522]	660	echo -en "$DONE\nINFO: Making complete dependency list"
[747]	661
	662	tr -s '/' '/' < $tempfile \| sort -u > $tempfile.new
	663	mv -f $tempfile.new $tempfile
	664	> $outfile.pre
	665	progress=0
	666	noof_lines=`cat $tempfile \| wc -l`
[2963]	667	LogFile "---------------------------------"
	668	LogFile "List of dependencies: "
	669	LogFile "---------------------------------"
[747]	670	for fname in `cat $tempfile` ; do
[1876]	671	echo "$fname" \| tee -a $LOGFILE >> $outfile.pre
	672	LocateDeps $fname \| tee -a $LOGFILE >> $outfile.pre
[925]	673	progress=$(($progress+1))
[3149]	674	LogProgress $progress $noof_lines
[747]	675	done
[1684]	676	if [ _"$MONDO_SHARE" != _"" ]; then
[925]	677	mkdir -p $bigdir/tmp
[3172]	678	mkdir -p $bigdir/usr/bin
[940]	679	if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
[3149]	680	LogAll "\nINFO: Incorporating post-nuke tarball"
[3522]	681	(cd "$bigdir" ; tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log)
[747]	682	fi
[963]	683	if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
[925]	684	LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
	685	else
[3565]	686	LogAll "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
	687	LogAll " I bet you've got a spare copy of Mondo or Mindi floating around on your system."
	688	LogAll " If Mindi was called by Mondo then send a bug report."
	689	LogAll " It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
	690	LogAll " Finally, run Mindi again."
[925]	691	Die "Odd."
	692	fi
[3565]	693	cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE \|\| LogAll "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
[3270]	694	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3149]	695	LogAll "\nINFO: Incorporating Network-related settings"
[3278]	696	for r in NETFS-* ; do
[963]	697	cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE \|\| Die "Cannot copy $r - did you run out of disk space?"
[2963]	698	LogFile "INFO: Copying $r to ramdisk"
[925]	699	done
	700	fi
[747]	701	fi
[925]	702	tr ' ' '\n' < $outfile.pre \| tr -s '/' '/' \| grep -Fvx "" \| sort -u \| grep -Ev "/libX11\|/libXext\|/libXi\|/libgtk\|/libgdk" > $outfile
[747]	703	rm -f $tempfile $outfile.pre
	704	[ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" \|\| echo "\nFailed."
	705	return $res
	706	}
	707
	708
	709	GenerateListForFile() {
	710	local files_found loc fname incoming i res
	711	incoming="$1"
	712	files_found=""
	713	res=0
	714
	715	for fname in $incoming ; do
	716	files_found="$files_found `LocateFile $fname`"
	717	done
	718
	719	echo "$files_found" \| tr ' ' '\n' \| sort -u \| tr '\n' ' '
	720	}
	721
	722
	723	# Returns all disk devices which are part of a raid array
	724	GetAllRaidMembers() {
	725	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]device/ if(\$2) {print \$2}" < /etc/raidtab
	726	}
	727
	728
	729	GetFileSizeList() {
	730	local i
	731	for i in `find $1 -type d -o -print` ; do
	732	du -sk $i
	733	done
	734	}
	735
	736
[1230]	737	# Check kernel filesystem capabilites for accessing initrd image
[2429]	738	# Could be ext2 FS (old mode) or initramfs (new mode)
[1230]	739	#
	740	# Interface definition:
	741	# param #1: absolute path to kernel image
	742	GetInitrdFilesystemToUse() {
	743
	744	# interface test: make sure we have one parameter
	745	if [ $# -ne 1 ]; then
	746	Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
	747	fi
	748
	749	# interface parameters
	750	local lvKernelImage=$1
	751
	752	# local constants (filesystem magic strings)
	753	local lcMagicCramfs="<3>cramfs: wrong magic"
[2047]	754	local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
[2390]	755	local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
[3353]	756	local lcMagicInitfs="<6>checking if image is initramfs...\|[<]6[>]Unpacking initramfs...\|[<]6[>]Trying to unpack rootfs image as initramfs"
[1230]	757
	758	# local variables
	759	local lvOffset
	760	local lvScanRes
	761	local lvUseFilesystem
	762
	763	# say where we are.
[3111]	764	LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
[1230]	765
	766	# verify that file exists
	767	[ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
	768
[3111]	769	# Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
[1730]	770	file $lvKernelImage 2>&1 \| grep -q gzip
[1566]	771	if [ $? -eq 0 ]; then
[3111]	772	LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
	773	lvScanRes=`gzip -cd $lvKernelImage \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
	774	else
	775	LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
	776	# kernel is x86 boot sector in RHEL3/4 with embedded gzip content
	777	# get offet of gzip magic "1f8b0800" in file (for these older kernels)
	778	lvOffset=`od -vA n -t x1 $lvKernelImage \| tr -d '[:space:]' \| awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
	779	if [ $lvOffset -eq 0 ]; then
	780	LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
	781	lvScanRes=$lcMagicInitfs
[2393]	782	else
[3111]	783	lvOffset=`expr $lvOffset / 2`
	784	LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
	785	# scan again kernel image
	786	lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
[2393]	787	fi
[3111]	788	fi
[2393]	789
[3111]	790	# determine which filesystem to use for initrd image: ext2\|3fs, gzip'ed cpio (initramfs) or cramfs
	791	if [ `echo $lvScanRes \| grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
	792	lvUseFilesystem="ext2fs"
	793	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
	794	lvUseFilesystem="ext3fs"
	795	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
	796	lvUseFilesystem="initramfs"
	797	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
	798	lvUseFilesystem="cramfs"
[2429]	799	else
[3111]	800	# In that case, we are most probably after 2.6.30 and use the supported initramfs
[3181]	801	LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
	802	LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
	803	LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep initramfs"
[1230]	804	lvUseFilesystem="initramfs"
	805	fi
[3111]	806
[1230]	807	# say what we are using
[3111]	808	LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
[1230]	809
	810	# return file system to use
	811	echo "$lvUseFilesystem"
	812
	813	}
	814
[747]	815	# Searches members of raid device
	816	# $1: raid device (/dev/md...)
	817	GetRaidDevMembers() {
[2917]	818	if [ ! -f /etc/raidtab ]; then
	819	return
	820	fi
[747]	821	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
	822	}
	823
	824
	825	ListAllPartitions() {
	826	local res currline partition all_partitions ap_orig remaining i j
	827
[2070]	828	grep -Evx " #.\| none." $MY_FSTAB \| $AWK '/^\/dev\/[imhs]d\|\|^LABEL=\/\|^UUID=/ && !/\/fdd\|\/cdr\|\/zip\|\/floppy/ {print $1}'
[747]	829	[ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
[1824]	830	if [ -e "/vmfs/volumes" ]; then
	831	# For VMWare ESX 3 get the device names of these volumes
[2431]	832	vdf -P \| grep -E '/vmfs/volumes' \| $AWK '{print $1}'
[1824]	833	fi
[747]	834	return
	835	}
	836
	837
	838	ListKernelModulePaths() {
[2583]	839	local module_list module fname r kern
[1399]	840	module_list="$MODULES"
[1230]	841	# Remove unwanted modules from list
	842	for i in $DENY_MODS; do
	843	module_list=`echo ${module_list} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
	844	done
[747]	845	###
	846	### Sq-Modification ... Use kernelname for module search path if specified
	847	###
[3231]	848	if [ "${kernelname}" != "" ]
[747]	849	then
	850	kern=${kernelname}
	851	else
[2292]	852	kern="$KERVERRUN"
[747]	853	fi
[2292]	854	export KERVER=$kern
[747]	855	###
	856	### Sq-Mod End
	857	###
[3310]	858	# Get rid of duplicates
	859	for module in `echo $module_list \| tr ' ' '\n' \| sort -u` ; do
[747]	860	r=`find /lib/modules/$kern -type f \| grep "/${module}\..*o" \| tail -n1`
[2471]	861	if [ -z "$r" ]; then
	862	if [ "`echo "$MODULES" \| grep -w $module`" ]; then
	863	r="[live module file not found]"
	864	else
	865	r="[extra module file not found]"
	866	fi
[2583]	867	else
	868	[ -f "$r" ] && echo "$r"
[2471]	869	fi
[2963]	870	LogFile "INFO: module $module --> $r"
[747]	871	done
	872	find /lib/modules/$kern/modules.* -type f 2> /dev/null
	873	}
	874
[1784]	875	#
	876	# Critical function which computes all dependencies (dyn. lib.)
	877	# for a list of binaries
	878	#
[747]	879	LocateDeps() {
	880	local incoming fname deps
[1724]	881	incoming="$*"
[3231]	882	deps=""
	883
[747]	884	for fname in $incoming ; do
	885	if [ ! -e "$fname" ] ; then
[2995]	886	LogFile "WARNING: $fname does not exist; cannot be LDD'd."
[747]	887	if echo $fname \| grep lvm &> /dev/null ; then
[2963]	888	LogFile " This warning only affects you if you are using LVM."
[1399]	889	if echo "$MODULES" \| grep lvm &> /dev/null ; then
[3231]	890	LogFile " I think you are, so please take heed!"
[747]	891	else
[3231]	892	LogFile " I don't think you are, so don't worry about it."
[747]	893	fi
	894	fi
	895	else
[3231]	896	deps="$deps $fname"
[747]	897	fi
	898	done
[3231]	899	mr-read-all-link `mr-process-ldd $deps \| sort -u` \| sort -u
[747]	900	}
	901
[925]	902
[747]	903	LocateFile() {
[3231]	904	local i j path fname_to_find location output resolved tmp stub cache_id loclist
[747]	905	fname_to_find="$1"
[1526]	906	# It's an absolute path
[3231]	907	j=`echo "$fname_to_find" \| cut -c1`
	908	if [ _"$j" = _"/" ]; then
	909	dn=`dirname $fname_to_find`
	910	# We suppose that the link is already included, just add the new file
	911	if [ -h "$dn" ]; then
	912	newdn=`readlink -f $dn`
	913	bn=`basename $fname_to_find`
	914	output="$newdn/$bn"
	915	else
	916	output="$fname_to_find"
	917	fi
[860]	918	if [ -h "$output" ] ; then
[3231]	919	output="`mr-read-all-link $output` $output"
[860]	920	fi
[859]	921	echo "$output"
	922	return 0
[747]	923	fi
[1526]	924	# It's not an absolute path
[747]	925	output=""
[1526]	926	for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
	927	#for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
	928	[ -h "$path" ] && continue
	929	[ ! -e "$path/$fname_to_find" ] && continue
	930	output="$path/$fname_to_find $output"
	931	if [ -h "$path/$fname_to_find" ] ; then
[3231]	932	output="`mr-read-all-link $path/$fname_to_find` $output"
[1526]	933	fi
[747]	934	done
	935	if [ "$output" = "" ] ; then
[860]	936	return 1
[747]	937	fi
	938	echo "$output"
	939	return 0
	940	}
	941
[3149]	942	LogProgress() {
[3293]	943	local i progress modres noof_lines title
[3149]	944
	945	progress=$1
	946	noof_lines=$2
[3293]	947	title=$3
[747]	948
[3149]	949	i=$(($progress*100))
	950	if [ $noof_lines -ne 0 ]; then
	951	i=$(($i/$noof_lines))
	952	else
	953	i=0
	954	fi
[3293]	955
	956	if [ _"$MONDO_SHARE" != _"" ]; then
	957	echo "$title $i%"
	958	else
	959	echo -en "\r\t\t\t\t\t\t\t\t"
	960	echo -en "$i"
	961	echo -en "%"
	962	modres=$(($progress%4))
	963	[ "$modres" -eq "0" ] && echo -en "\t/"
	964	[ "$modres" -eq "1" ] && echo -en "\t-"
	965	[ "$modres" -eq "2" ] && echo -en "\t\\"
	966	[ "$modres" -eq "3" ] && echo -en "\t\|"
	967	fi
[3149]	968	}
	969
[3522]	970	# Called by MakeBootInitFile, to make /tmp/$MRCFG
[747]	971	MakeMondoConfigFile() {
	972	local outfile use_lzo use_comp use_star
	973	outfile=$1
	974	> $outfile
	975	[ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
	976	[ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
[1698]	977	[ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
[747]	978	[ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
	979	[ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
	980	[ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
	981	use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
[998]	982	use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
[3149]	983	use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
[747]	984	use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
	985	use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
	986	echo "use-lzo $use_lzo" >> $outfile
[998]	987	echo "use-gzip $use_gzip" >> $outfile
[747]	988	echo "use-star $use_star" >> $outfile
[3149]	989	echo "use-lzma $use_lzma" >> $outfile
[747]	990	echo "use-comp $use_comp" >> $outfile
[3397]	991	echo "boot-type $BOOT_TYPE" >> $outfile
[747]	992	echo "datestamp `date`" >> $outfile
	993	[ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
[940]	994	AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
	995	AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
	996	AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
[3278]	997	AddFileToCfgIfExists $MINDI_TMP/ISO-DIR iso-dir $outfile
[940]	998	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
	999	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
[3278]	1000	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER bootloader.ver $outfile
[940]	1001	AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
	1002	AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
	1003	AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
[3278]	1004	AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
	1005	AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
	1006	AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
	1007
[3270]	1008	# Deal with network configuration in a portable way
	1009	if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
	1010	mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
	1011	fi
[747]	1012	}
	1013
[2618]	1014	# Get PV's for an LV
	1015	GetPVsForLV() {
[3368]	1016	if [ -n "$1" ]; then
	1017	vg=`$LVMCMD lvdisplay $1 2>/dev/null \|awk '/VG Name/{print $NF;exit}'`
	1018	if [ -z "$vg" ]; then
	1019	return
	1020	fi
	1021	$LVMCMD vgdisplay -v $vg 2>/dev/null \| awk '/PV Name/{print $NF}'
	1022	fi
[2618]	1023	}
[747]	1024
[2618]	1025
[747]	1026	MakeMountlist() {
[2907]	1027	local mountlist all_partitions current_partition \
[747]	1028	partition_size partition_format outstring partition_number \
	1029	partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
[2013]	1030	absolute_partition old_partition_fmt current_lvolume uname skip
[747]	1031
[3149]	1032	LogFile "------------------------------------"
[3522]	1033	LogFile "INFO: Your raw fstab file looks like this:"
[2963]	1034	LogFile "------------------------------------"
[747]	1035	cat $MY_FSTAB >> $LOGFILE
[3149]	1036	LogAll "-----------------------------------"
[3522]	1037	LogAll "INFO: Your mountlist will look like this:"
[3149]	1038	LogAll "-----------------------------------"
[747]	1039
[2907]	1040	# mountlist(OUT)
[747]	1041	mountlist=$1
	1042
	1043	# NB: partition = device
	1044	# NB: mountpt = where the device is mounted
	1045
	1046	[ -e "$MY_FSTAB" ] \|\| Die "Cannot find your fstab file ($MY_FSTAB)"
	1047
[3565]	1048	[ "$mountlist" != "" ] && [ "$mountlist" != "/" ] && rm -Rf $mountlist
[747]	1049	> $mountlist
	1050	all_partitions=""
	1051
	1052	if [ $LVM != "false" ]; then
[3499]	1053	LogFile "INFO: Analyzing LVM..."
[968]	1054	$MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
[971]	1055	if [ $? -ne 0 ]; then
[963]	1056	LVM="false"
	1057	fi
[2536]	1058	# Excluded LVs and GVs are not reported here
[2424]	1059	all_partitions=`cat $MINDI_TMP/lvm.res \| grep -F ">>>" \| cut -d' ' -f2-`
[747]	1060	fi
	1061	all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
	1062	for i in $IMAGE_DEVS ; do
	1063	mount \| grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
	1064	done
	1065	[ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" \| tr ' ' '\n' \| sort -u \| tr '\n ' ' '`"
[3149]	1066	printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID \| tee -a $LOGFILE
	1067	printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------ ------- ---------- \| tee -a $LOGFILE
[3028]	1068	useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
[747]	1069	for c_p in $all_partitions ; do
[2917]	1070	# Skip fd/cd devices, network FS, cifs
[2452]	1071	[ "`echo "$useless_dev" \| grep -F "$c_p"`" != "" ] \|\| [ "`echo "$c_p" \| grep ":"`" != "" ] \|\| [ "`echo "$c_p" \| grep -E "^//"`" != "" ]&& continue
[747]	1072	[ "`echo "$c_p" \| grep -x "/dev/cdroms.*"`" ] && continue
	1073	if [ -h "$c_p" ] && [ "`echo "$c_p" \| grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/md"`" = "" ] ; then
[861]	1074	current_partition=`readlink -f $c_p`
[3046]	1075	if [ "`echo "$current_partition" \| grep -F "/dev/mapper"`" != "" ]; then
	1076	current_partition="$c_p"
	1077	elif [ "`echo $current_partition \| grep -E '^/dev/dm-'`" ]; then
[3059]	1078	# For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
[3066]	1079	current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
[3046]	1080	fi
[747]	1081	[ "`echo "$useless_dev" \| grep -F "$current_partition"`" ] && continue
	1082	else
	1083	current_partition="$c_p"
	1084	fi
	1085	[ "$c_p" = "none" ] && continue
	1086	redhat_label=""
[1831]	1087	label=""
[957]	1088	uuid=""
[861]	1089	absolute_partition=`readlink -f $c_p`
[2965]	1090	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$current_partition" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[747]	1091
[1986]	1092	# set default in case we dont't find it
	1093	str_to_find_fmt_with=$current_partition
	1094
[747]	1095	# This part tries to retrieve the correct device from a LABEL line in /etc/fstab
	1096	# current_partition contains only first column of /etc/fstab
[2965]	1097	if [ "`echo "$current_partition" \| grep -i "LABEL="`" != "" ]; then
[980]	1098	redhat_label=`echo "$current_partition" \| cut -d'=' -f2`
[747]	1099	actual_dev=""
[853]	1100
	1101	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1102	if [ -x "/sbin/findfs" ]; then
[2847]	1103	actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
[853]	1104	fi
[747]	1105
[853]	1106	# 2nd try : blkid, the good way for all LABEL except swap
	1107	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[2965]	1108	actual_dev=`/sbin/blkid \| grep "$redhat_label" \| grep LABEL= \| cut -d':' -f1`
[747]	1109	# For LVM FS it will give a /dev/dm-# which should then be converted
[748]	1110	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1111	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1112	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[747]	1113	for dev in `ls /dev/mapper/*`; do
[963]	1114	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1115	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[747]	1116	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1117	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[747]	1118	break
	1119	fi
	1120	done
	1121	fi
	1122	fi
	1123
[853]	1124	# 3rd try, which works on a standard partition (ext2/3), but not on swap
[747]	1125	# For LVM gives a /dev/mapper entry
	1126	if [ "x$actual_dev" = "x" ]; then
[2965]	1127	actual_dev=`/bin/mount -l \| grep "\[$redhat_label\]" \| cut -d' ' -f1`
[747]	1128	fi
	1129
[853]	1130	# 4th try, with vol_id
[747]	1131	# SWAP only
	1132	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[2965]	1133	list_swaps=`cat /proc/swaps \| grep "/dev/" \| $AWK '{ print $1 }' `
[747]	1134	for dev_swap in $list_swaps ; do
[2965]	1135	dev_exists=`/sbin/vol_id $dev_swap \| grep "$redhat_label"`
[747]	1136	if [ "x$dev_exists" != "x" ]; then
	1137	actual_dev=$dev_swap
	1138	break;
	1139	fi
	1140	done
	1141	fi
	1142
[853]	1143	# 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
[789]	1144	# LABEL=SW-cciss/c0d0p3 (RDP)
[853]	1145	# or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
[747]	1146	# SWAP only
[2965]	1147	if [ "x$actual_dev" = "x" -a _"`echo $current_partition \| grep -iE 'LABEL=SWAP\|LABEL=SW-'`" != _"" ]; then
[2013]	1148	skip=""
[2292]	1149	uname=$KERVERRUN
[2013]	1150	[ "`echo $uname \| grep "2.4.[0-9]"`" != "" ] && skip=16
	1151	# 2.6.12 needs 16 (FC3)
	1152	[ "`echo $uname \| grep "2.6.[0-1]"`" != "" ] && skip=16
	1153	# 2.6.19 and upper needs 1052
	1154	[ "`echo $uname \| grep "2.6.19"`" != "" ] && skip=1052
	1155	[ "`echo $uname \| grep "2.6.[2-9]"`" != "" ] && skip=1052
[2892]	1156	[ "`echo $uname \| grep "3.[0-9].[0-9]"`" != "" ] && skip=1052
[2013]	1157	if [ $skip = "" ]; then
	1158	Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
	1159	fi
[853]	1160	for try_dev in `tail +2 /proc/swaps \| cut -d' ' -f1`
	1161	do
	1162	# Location of the swap label for kernel 2.6
[2013]	1163	try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
[853]	1164	if [ "x$try_dev_label" = "x$redhat_label" ]; then
[855]	1165	actual_dev=$try_dev
[853]	1166	fi
	1167	done
[747]	1168	fi
[1008]	1169
	1170	# Check if one of all those tries has known success
	1171	if [ "x$actual_dev" != "x" ]; then
	1172	current_partition=$actual_dev
	1173	else
[1885]	1174	Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
[1008]	1175	fi
[957]	1176	# This part tries to retrieve the correct device from a UUID line in /etc/fstab
	1177	# current_partition contains only first column of /etc/fstab
[2965]	1178	elif [ "`echo "$current_partition" \| grep -i "UUID="`" != "" ]; then
[980]	1179	uuid=`echo "$current_partition" \| cut -d'=' -f2`
[957]	1180	actual_dev=""
	1181
	1182	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1183	if [ -x "/sbin/findfs" ]; then
	1184	actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
	1185	fi
	1186
[1531]	1187	# 2nd try : blkid, the good way for all UUID except swap
[957]	1188	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[2965]	1189	actual_dev=`/sbin/blkid \| grep "$uuid" \| grep UUID= \| cut -d':' -f1`
[957]	1190	# For LVM FS it will give a /dev/dm-# which should then be converted
	1191	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1192	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1193	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[957]	1194	for dev in `ls /dev/mapper/*`; do
[963]	1195	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1196	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[957]	1197	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1198	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[957]	1199	break
	1200	fi
	1201	done
	1202	fi
	1203	fi
	1204
	1205	# 3th try, with vol_id
	1206	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[2965]	1207	list_dev=`mount \| grep -E '^/' \| $AWK '{ print $1 }' `
[957]	1208	for dev in $list_dev ; do
[2965]	1209	dev_exists=`/sbin/vol_id $dev \| grep "$uuid"`
[957]	1210	if [ "x$dev_exists" != "x" ]; then
	1211	actual_dev=$dev
	1212	break;
	1213	fi
	1214	done
	1215	fi
	1216
[1531]	1217	# 4th try, with dumpuuid (VMWare only ?) for swap
	1218	if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
[2965]	1219	list_dev=`cat /proc/swaps \| grep -E '^/' \| $AWK '{ print $1 }' `
[1531]	1220	for dev in $list_dev ; do
[2965]	1221	dev_exists=`/sbin/dumpuuid $dev \| grep "$uuid"`
[1531]	1222	if [ "x$dev_exists" != "x" ]; then
	1223	actual_dev=$dev
	1224	break;
	1225	fi
	1226	done
	1227	fi
	1228
[747]	1229	# Check if one of all those tries has known success
	1230	if [ "x$actual_dev" != "x" ]; then
	1231	current_partition=$actual_dev
	1232	else
[2069]	1233	Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs\|blkid\|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
[747]	1234	fi
	1235	else
[1863]	1236	# Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
	1237	# they use symlinks in fstab unrelated to what is shown in mount !
	1238	if [ _"$partition_mountpt" = _"" ]; then
[1986]	1239	# set default in case we dont't find it
[2965]	1240	for tmpp in `tr -s '\t' ' ' < $MY_FSTAB \| grep -Ev "^#" \| $AWK '{print $1}'`; do
[3084]	1241	if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
[1863]	1242	str_to_find_fmt_with=$tmpp
[2965]	1243	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$tmpp" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[1864]	1244	break;
[1863]	1245	fi
	1246	done
	1247	fi
[747]	1248	fi
	1249
[3084]	1250	# Detects noauto partitions not mounted and exclude them
	1251	partition_option=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$str_to_find_fmt_with" \| grep -vx " #." \| $AWK '{print $4}' \| head -n1`
	1252	if [ "`echo "$partition_option" \| grep -i noauto`" != "" ] && [ "`mount \| grep -w "$partition_mountpt"`" = "" ] ; then
	1253	LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
	1254	continue
	1255	fi
	1256	# Detects bind partitions and exclude them
	1257	if [ "`echo "$partition_option" \| grep -iw bind`" != "" ]; then
	1258	LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
	1259	continue
	1260	fi
	1261
[2566]	1262	# Look for devices which have to be excluded
	1263	skip=0
	1264	if [ "$MINDI_EXCLUDE_DEVS" ] ; then
[2568]	1265	l=""
[3231]	1266	list_of_devices="`mr-read-all-link $current_partition`"
[2568]	1267	for d in $list_of_devices; do
[2579]	1268	l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
[2568]	1269	done
[2618]	1270
	1271	# Remove PVs from LVs excluded
	1272	l="$l `GetPVsForLV $current_partition`"
	1273
	1274	# We want a single unique list
[3522]	1275	list_of_devices="`echo $l \| tr ' ' '\n' \| sort -u`"
[2618]	1276
[2854]	1277	for d in `echo $MINDI_EXCLUDE_DEVS \| sed 's/\|/ /g'`; do
[2568]	1278	if [ "`echo " $list_of_devices " \| grep " $d"`" != "" ]; then
[2963]	1279	LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
[2566]	1280	skip=1
	1281	continue
	1282	fi
	1283	done
	1284	fi
	1285	if [ $skip -eq 1 ]; then
	1286	continue
	1287	fi
	1288
[747]	1289	partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
[3028]	1290	# Detects iso9660 ISO images and exclude them
	1291	if [ "`echo "$partition_format" \| grep -iw iso9660`" != "" ]; then
[3064]	1292	LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
[3028]	1293	continue
	1294	fi
[747]	1295	# Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
	1296	# for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
	1297	# the former is then a link to the latter, so we test whether
	1298	# $current_partition is actually such a link or not and set
[755]	1299	# $current_lvolume accordingly. On Debian you may find more than one answer
	1300	# so we remove the one corresponding to /dev/.static
	1301	# On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
	1302	# principle is the same and we need to find the link to it as well.
	1303	# Note that $current_lvolume may well be an
[747]	1304	# ordinary device. It is just to make sure that we feed the right value
	1305	# into any of the LVM tools if possible.
	1306
[3064]	1307	current_lvolume="$current_partition"
[763]	1308	if [ $LVM = "v2" ] && [ "`echo $current_partition \| grep -E '^/dev/mapper/'`" ]; then
[755]	1309	# .static dir are a Debian specificity
[763]	1310	current_lvolume="`find /dev -lname "$current_partition" \| grep -Ev '^/dev/\.static/'`"
[755]	1311	echo $current_lvolume \| grep -q ' '
[784]	1312	if [ $? -eq 0 ]; then
[2963]	1313	LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
[755]	1314	fi
[2072]	1315	# if it's not found, it may well be a real device such as a multipath one
	1316	# /dev/mapper/mpath... Thus we revert the situation so that next test succeed
	1317	if [ _"$current_lvolume" = _"" ]; then
	1318	current_lvolume="$current_partition"
	1319	fi
[747]	1320	fi
	1321	#
	1322	# End of LVM device style variation code (other than $current_lvolume).
	1323
[745]	1324	if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
	1325	# Size computed via LVM not directly
[747]	1326	partition_size="lvm"
	1327	else
	1328	[ "`echo "$current_partition" \| grep "[0-9]"`" = "" ] && continue
	1329	[ "`echo "$current_partition" \| grep -c "^/"`" -ne "1" ] && continue
	1330	if [ "$partition_format" = "swap" ] \|\| [ "$partition_mountpt" = "swap" ] ; then
[2947]	1331	# Skip swap files
	1332	[ "`echo "$current_partition" \| grep -E "^/dev"`" = "" ] && continue
[2919]	1333	partition_size=`grep -Fv "Priority" /proc/swaps \| tr -s '\t' ' ' \| grep -F "$current_partition " \| $AWK '{print $3}'`
[747]	1334	[ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
[3368]	1335	[ "$partition_format" != "swap" ] && partition_format="swap"
[747]	1336	if [ "$partition_size" = "" ] ; then
[3368]	1337	totalsize=0
	1338	items=0
	1339	for i in `tr -s ' ' '\t' < /proc/swaps \| grep -Fv "Filename" \| cut -f3` ; do
[747]	1340	totalsize=$(($totalsize+$i))
	1341	items=$(($items+1))
[3368]	1342	done
	1343	[ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) \|\| partition_size=0
	1344	[ "$partition_size" -lt "125000" ] && partition_size=125000
	1345	LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
[747]	1346	fi
[2947]	1347	else
	1348	partition_size=`SizeOfPartition $current_partition`
[747]	1349	fi
	1350	fi
	1351	[ "$partition_mountpt" = "swap" ] && partition_format="swap"
	1352	[ "$partition_format" = "swap" ] && partition_mountpt="swap"
	1353	if [ "$partition_mountpt" = "" ] ; then
	1354	if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
	1355	if [ "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
	1356	partition_mountpt="raid"
	1357	partition_format="raid"
	1358	else
	1359	partition_mountpt="lvm"
	1360	partition_format="lvm"
	1361	fi
	1362	fi
	1363	fi
	1364	psz=$partition_size
[2963]	1365	LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
[747]	1366	[ "$psz" != "lvm" ] && psz=$(($psz/1024))
	1367	if [ "`echo " $IMAGE_DEVS " \| grep -F " $current_partition "`" != "" ] ; then
	1368	partition_mountpt="image"
	1369	old_partition_fmt=$partition_format
	1370	partition_format="`$FDISK -l 2>> $LOGFILE \| tr '*' ' ' \| tr '+' ' ' \| tr -s ' ' '\t' \| grep -w "$absolute_partition" \| cut -f5`"
	1371	partition_size=$(($partition_size+1)); # just in case
	1372	if [ "$partition_format" = "Linux" ] ; then
[2963]	1373	LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
	1374	LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
[747]	1375	partition_format=$old_partition_fmt
	1376	fi
	1377	fi
[2566]	1378
[747]	1379	if [ ! "$partition_mountpt" ] ; then
[2963]	1380	LogFile "------- $FDISK -l $qq log ------------"
[1883]	1381	for qq in "" `find /dev/ida/cd ! -name 'p' 2> /dev/null`; do
[747]	1382	partition_format=`$FDISK -l $qq 2>> $LOGFILE \| grep -w "$c_p" \| sed 's/12/\|/' \| tr -s '\t' ' ' \| cut -d'\|' -f2 \| cut -d' ' -f2-9`
	1383	[ "$partition_format" ] && break
	1384	done
[2963]	1385	LogFile "------- $FDISK log end ------------"
[747]	1386	if [ "$partition_format" = "Compaq diagnostics" ] ; then
	1387	partition_format="compaq"
	1388	elif [ ! "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
[3149]	1389	LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
[747]	1390	continue
	1391	fi
	1392	fi
[1755]	1393	if [ "$redhat_label" ]; then
	1394	label="$redhat_label"
[1756]	1395	elif [ "$uuid" ]; then
[1755]	1396	label="$uuid"
	1397	fi
[3330]	1398
	1399	# On RHEL 7 they use UUID concretely, even when not mentioned in fstab
	1400	# in order to mount the root part e.g. in grub.
	1401	# One way to solve this is to add the UUID now, if there wasn't one so it's
	1402	# restored correctly
	1403	if [ _"$label" = _"" ]; then
	1404	label=`blkid $current_partition \| perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
	1405	fi
	1406
[747]	1407	partition_format="`echo "$partition_format" \| cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
[963]	1408	[ "$partition_format" = "auto" ] && partition_format="`mount \| grep -w $current_partition \| $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
[3149]	1409	unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
[747]	1410	if [ "$current_partition" = "" ] ; then
[2963]	1411	LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
[747]	1412	elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
	1413	if [ "`grep -F device /etc/raidtab 2>/dev/null \| grep -F $current_partition`" ] ; then
	1414	partition_mountpt=raid
	1415	partition_format=raid
[3149]	1416	printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
[1755]	1417	printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1418	else
[2963]	1419	LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
[747]	1420	fi
	1421	elif [ "$partition_format" = "" ] ; then
[2963]	1422	LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
[747]	1423	elif [ "$partition_size" = "" ] ; then
[2963]	1424	LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
[747]	1425	elif [ "$partition_mountpt" = "/proc" ] \|\| [ "$partition_mountpt" = "/dev/pts" ] ; then
	1426	continue
	1427	else
	1428	if [ "$partition_format" = "dos" ] \|\| [ "$partition_format" = "msdos" ] ; then
[3522]	1429	LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
[747]	1430	partition_format="vfat"
	1431	fi
[3149]	1432	printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
[1755]	1433	printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1434	fi
	1435	done
[3149]	1436	LogAll "-----------------------------------"
[747]	1437	}
	1438
[2432]	1439	CheckMountlist() {
	1440	local file=$1
	1441	# Coherency verification
[2529]	1442	ML01=`cat $file \| wc -l`
[2995]	1443	ML02=`grep -vE ' lvm \| raid \| swap ' $file \| wc -l`
[2432]	1444	ML1=`$AWK '{print $1}' $file \| sort -u \| wc -l`
[3024]	1445	ML2=`grep -vE ' lvm \| raid \| swap ' $file \| $AWK '{print $2}' \| sort -u \| wc -l`
[2529]	1446	if [ "$ML01" -ne "$ML1" ]; then
[2963]	1447	LogFile "--------------------------------------------"
[3081]	1448	LogAll "WARNING: Duplicate device entry in mountlist"
[2963]	1449	LogFile "--------------------------------------------"
[2432]	1450	fi
[2529]	1451	if [ "$ML02" -ne "$ML2" ]; then
[2963]	1452	LogFile "--------------------------------------------"
	1453	LogAll "WARNING: Duplicate mountpoint entry in mountlist"
	1454	LogFile "------------------------------------------------"
[2432]	1455	fi
	1456	}
[747]	1457
[3476]	1458
[3522]	1459	MakeISOErrors() {
[3421]	1460
[3522]	1461	LogFile "----------- $ISO_CMD's errors --------------"
	1462	LogAll "$ISO_CMD returned the following errors:"
	1463	cat $MINDI_TMP/mkisofs.log \| tee -a $LOGFILE
	1464	LogAll "ERROR: Failed to create ISO image."
	1465	}
[3499]	1466
[3532]	1467	MakeISO() {
	1468
[3535]	1469	LogAll "INFO: Invoking $CMD ."
[3532]	1470	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
	1471	if [ $? -ne 0 ] ; then
	1472	if [ "$BOOT_TYPE" = "UEFI" ]; then
	1473	CMD=`echo $CMD \| perl -p -e 's\|--efi-boot \|-eltorito-platform 0xEF -eltorito-boot \|; s\|-efi-boot \|-eltorito-platform 0xEF -eltorito-boot \|;'`
	1474	LogAll "INFO: Invoking instead $CMD"
	1475	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
	1476	if [ $? -eq 0 ] ; then
	1477	LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
	1478	else
	1479	MakeISOErrors
	1480	fi
	1481	else
	1482	MakeISOErrors
	1483	fi
	1484	else
	1485	LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
	1486	fi
	1487	rm -f $MINDI_TMP/mkisofs.log
	1488	}
	1489
[3522]	1490	MakeBootableDevice() {
[3499]	1491
[3522]	1492	local target tbc retval part size mount_opt
	1493
	1494	target="$1"
	1495
	1496	rm -Rf $MINDI_TMP/target
	1497	mkdir -p $MINDI_TMP/target/{images,archives,tmp}
	1498
	1499	LogAll "INFO: Copying $MINDI_CACHE/*.gz to $MINDI_TMP/target/images"
	1500	cp -f $MINDI_CACHE/*.gz $MINDI_TMP/target/images 2>> $LOGFILE \|\| LogAll "WARNING: MakeBootableDevice: Cannot copy files to $MINDI_TMP/target/images"
	1501	for i in memdisk memtest.bin memtest.img ; do
	1502	j=$MINDI_LIB/$i
	1503	k=$MINDI_TMP/target
	1504	if [ -e "$j" ] ; then
	1505	LogAll "INFO: Copying $j to $k"
	1506	cp -f $j $k 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $k"
	1507	cp -f $j $MINDI_TMP 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $MINDI_TMP"
	1508	if [ _"$MONDO_SHARE" != _"" ]; then
	1509	cp -f $j $MONDO_ROOT 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $MONDO_ROOT"
[3499]	1510	fi
[3522]	1511	fi
	1512	done
[3499]	1513
[3522]	1514	retval=0
	1515	LogAll "INFO: Copying $kernelpath to $MINDI_TMP/target/vmlinuz"
	1516	cp $kernelpath $MINDI_TMP/target/vmlinuz 2>> $LOGFILE
[3528]	1517	if [ $? -ne 0 ] ; then
[3522]	1518	LogAll "ERROR: Failed to copy $kernelpath $MINDI_TMP/target/"
	1519	retval=$(($retval+1))
	1520	fi
	1521	LogAll "INFO: Copying $MINDI_TMP/initrd.img to $MINDI_TMP/target/initrd.img"
	1522	cp $MINDI_TMP/initrd.img $MINDI_TMP/target/ 2>> $LOGFILE
[3528]	1523	if [ $? -ne 0 ] ; then
[3522]	1524	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MINDI_TMP/target/"
	1525	retval=$(($retval+1))
	1526	fi
[3421]	1527
[3522]	1528	# copy boot stuff now generated in PrepareDataDiskImage
	1529	if [ "$BOOT_TYPE" = "UEFI" ]; then
	1530	(cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
	1531	tbc="EFI"
[3528]	1532	# Also prepare a BIOS compatible boot
	1533	if [ "$target" = "ISO" ]; then
	1534	cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
	1535	fi
[3522]	1536	else
	1537	(cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
	1538	tbc="syslinux"
	1539	if [ -f "$MINDI_TMP/target/$tbc/syslinux.cfg" ]; then
	1540	LogFile "----------- syslinux's conf --------------"
	1541	cat $MINDI_TMP/target/$tbc/syslinux.cfg >> $LOGFILE
	1542	LogFile "------------------------------------------"
	1543	fi
	1544	if [ "$target" = "ISO" ]; then
	1545	cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
[3528]	1546	if [ $? -ne 0 ] ; then
[3522]	1547	LogAll "ERROR: Failed to copy $ISOLINUX to $MINDI_TMP/target/$tbc"
	1548	retval=$(($retval+1))
[3476]	1549	fi
[3522]	1550	fi
	1551	fi
[3476]	1552
[3522]	1553	if [ "$ARCH" != "ia64" ] ; then
	1554	if [ $KERNEL_IS_XEN = "yes" ]; then
	1555	FindMboot32Binary
	1556	cp $xenkernelpath $MINDI_TMP/target/xen.gz 2>> $LOGFILE
[3528]	1557	if [ $? -ne 0 ] ; then
[3522]	1558	LogAll "ERROR: Failed to copy $xenkernelpath to $MINDI_TMP/target/"
	1559	retval=$(($retval+1))
[1885]	1560	fi
[3522]	1561	cp $MBOOTC32 $MINDI_TMP/target/$tbc/mboot.c32 2>> $LOGFILE
[3528]	1562	if [ $? -ne 0 ] ; then
[3522]	1563	LogAll "ERROR: Failed to copy $MBOOTC32 to $MINDI_TMP/target/$tbc"
	1564	retval=$(($retval+1))
	1565	fi
[747]	1566	fi
[3522]	1567	fi
[3499]	1568
[3522]	1569	MakeMessageFile $MINDI_TMP/target/$tbc \| cut -c1-80 > $MINDI_TMP/target/$tbc/message.txt
	1570
	1571	if [ _"$MONDO_SHARE" != _"" ]; then
	1572	cp -rf $MINDI_TMP/target/$tbc $MONDO_ROOT 2>> $LOGFILE
[3528]	1573	if [ $? -ne 0 ] ; then
[3522]	1574	LogAll "ERROR: Failed to copy $MINDI_TMP/target/$tbc to $MONDO_ROOT"
	1575	LogAll " Please check the target directory."
	1576	retval=$(($retval+1))
	1577	fi
	1578	if [ $KERNEL_IS_XEN = "yes" ]; then
	1579	cp -f $MINDI_TMP/target/xen.gz $MONDO_ROOT 2>> $LOGFILE
[3528]	1580	if [ $? -ne 0 ] ; then
[3522]	1581	LogAll "ERROR: Failed to copy $MINDI_TMP/target/xen.gz to $MONDO_ROOT"
	1582	LogAll " Please check the target directory."
	1583	retval=$(($retval+1))
[3476]	1584	fi
[747]	1585	fi
[3522]	1586	cp -f $MONDO_SHARE/autorun $MINDI_TMP/target 2>> $LOGFILE
[3527]	1587	cp -f $MINDI_TMP/target/vmlinuz $MONDO_ROOT 2>> $LOGFILE
[3528]	1588	if [ $? -ne 0 ] ; then
[3527]	1589	LogAll "ERROR: Failed to copy $MINDI_TMP/vmlinuz to $MONDO_ROOT"
	1590	LogAll " Please check the target directory."
	1591	retval=$(($retval+1))
	1592	fi
	1593	cp -f $MINDI_TMP/target/initrd.img $MONDO_ROOT 2>> $LOGFILE
[3528]	1594	if [ $? -ne 0 ] ; then
[3527]	1595	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MONDO_ROOT"
	1596	LogAll " Please check the target directory."
	1597	retval=$(($retval+1))
	1598	fi
[3522]	1599	fi
[747]	1600
[3522]	1601	if [ -f "$MINDI_TMP/$MRCFG" ]; then
	1602	cp -f $MINDI_TMP/$MRCFG $MINDI_TMP/target/tmp
	1603	fi
[747]	1604
[3522]	1605	LogFile "----------- target dir content -----------"
	1606	LogFile "------------------------------------------"
	1607	ls -lR $MINDI_TMP/target >> $LOGFILE
	1608	LogFile "------------------------------------------"
	1609	LogFile "----------- target dir sizes -------------"
	1610	du -sk $MINDI_TMP/target/* >> $LOGFILE
	1611	LogFile "------------------------------------------"
[3476]	1612
[3522]	1613	if [ "$retval" -ne "0" ] ; then
	1614	LogFile "--------------------------------"
	1615	LogFile "INFO: Size of $MINDI_TMP/target:"
	1616	du -sk $MINDI_TMP/target/* >> $LOGFILE
	1617	LogFile "--------------------------------"
	1618	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
[3546]	1619	sync
[3522]	1620	umount $MINDI_TMP/target
	1621	LogAll "ERROR: Problems while creating boot media."
	1622	LogAll " Please unload some of your modules and try again."
	1623	Die " Try to increase EXTRA_SPACE in $MINDI_CONFIG"
	1624	fi
[3476]	1625
[3522]	1626	mkdir -p $MINDI_TMP/mpt
[1684]	1627
[3522]	1628	if [ "$target" = "USB" ]; then
	1629	LogAll "INFO: Transforming $USBDEVICE in a Bootable device"
	1630	LogAll "INFO: Checking $USBDEVICE"
[2924]	1631	$FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
[1684]	1632	if [ $? -ne 0 ]; then
[2963]	1633	LogAll "ERROR: Unable to access $USBDEVICE"
[3086]	1634	LogAll " Make sure your USB device is plugged in"
[2963]	1635	MindiExit -1
[1684]	1636	fi
[3149]	1637	# Some distro do auto mount at that point (Ubuntu)
[3522]	1638	LogAll "INFO: Unmounting $USBPART just in case"
[3546]	1639	sync
[1721]	1640	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[3419]	1641	if [ "$BOOT_TYPE" = "BIOS" ]; then
[3403]	1642	# If your key has no MBR it may cause an issue
	1643	# Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
	1644	if [ -r $MBRFILE ]; then
	1645	LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
[3522]	1646	dd if=$MBRFILE of=$USBDEVICE >> $LOGFILE 2>> $LOGFILE
[3403]	1647	else
	1648	LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
	1649	LogAll " on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
	1650	fi
[2855]	1651	fi
[3522]	1652	LogAll "INFO: Preparing $USBDEVICE"
[2851]	1653	cat > $MINDI_TMP/fdisk.txt << EOF
[2057]	1654	d
	1655	d
	1656	d
	1657	d
[1684]	1658	n
	1659	p
	1660	1
	1661
	1662
	1663	t
	1664	b
	1665	a
	1666	1
	1667	w
	1668	EOF
[2851]	1669	$FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
[1684]	1670	if [ $? -ne 0 ]; then
[2963]	1671	LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
[3086]	1672	LogAll " Make sure your USB device is plugged in"
[1684]	1673	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1674	MindiExit -1
	1675	fi
[2963]	1676	LogFile "fdisk build file"
	1677	LogFile "----------------"
[2851]	1678	cat $MINDI_TMP/fdisk.txt >> $LOGFILE
[2963]	1679	LogFile "----------------"
[2924]	1680	rm -f $MINDI_TMP/fdisk.txt
[3522]	1681	LogAll "INFO: The USB device $USBDEVICE now looks like this:"
[2190]	1682	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
[3006]	1683	# Calling kpartx in case devices were not created
[3033]	1684	if [ -x "/sbin/kpartx" ]; then
[3027]	1685	/sbin/kpartx -a $USBDEVICE
	1686	fi
[2461]	1687	# Some distro do auto mount at that point (Ubuntu)
[3522]	1688	LogAll "INFO: Unmounting $USBPART just in case again"
[3546]	1689	sync
[2461]	1690	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[3086]	1691	# Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
	1692	if [ "`which dmsetup`" != "" ]; then
[3368]	1693	block_id="`echo $USBPART \| sed 's/\/dev\///g'`"
	1694	if [[ "`dmsetup ls \| awk '{print $1}' \| grep $block_id`" != "" ]]; then
[3522]	1695	LogAll "INFO: Removing $block_id from device mapper."
[3368]	1696	sleep 1
	1697	dmsetup remove $block_id
	1698	fi
	1699	fi
[3522]	1700	part=$USBPART
	1701	mount_opt=""
	1702	else
	1703	# ISO image
	1704	part=$MINDI_TMP/mindi-bootroot.img
	1705	size=`du -sk $MINDI_TMP/target 2> /dev/null \| cut -f1`
	1706	# Adds 10 MB to allow for additional space
	1707	size=$(($size+10000))
	1708	LogAll "INFO: Creating a $size KB empty file for boot device of the ISO image"
	1709	dd if=/dev/zero of=$part bs=1k count=$size &> /dev/null \|\| Die "Cannot dd blank $part"
	1710	mount_opt="-o loop"
	1711	fi
	1712
	1713	LogAll "INFO: Creating a vfat filesystem on $part"
[3531]	1714
	1715	mkfs.vfat $part 2>&1 >> $LOGFILE
[3522]	1716	if [ $? -ne 0 ]; then
	1717	LogAll "ERROR: Unable to create a vfat filesystem on $part"
	1718	if [ "$target" = "USB" ]; then
	1719	LogAll " Make sure your USB device is plugged in and partitioned ($part must exist on it)"
[1684]	1720	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1721	fi
[3522]	1722	MindiExit -1
	1723	fi
[3532]	1724	if [ "$target" = "ISO" ]; then
	1725	if [ "$BOOT_TYPE" = "BIOS" ]; then
	1726	# syslinux should be run on a local file (doen't work through NFS Cf: #297)
	1727	# and run after the formating for versions > 6 it seems
	1728	syslinux $part >> $LOGFILE 2>> $LOGFILE
	1729	fi
	1730	fi
[3522]	1731	LogAll "INFO: Mounting $part on $MINDI_TMP/mpt"
	1732	mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
	1733	if [ $? -ne 0 ]; then
	1734	LogAll "ERROR: Unable to mount $part on $MINDI_TMP/mpt"
	1735	if [ "$target" = "USB" ]; then
	1736	LogAll " Make sure your USB device is plugged in, partitioned and formated ($part must exist on it)"
[1684]	1737	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1738	fi
[3522]	1739	MindiExit -1
	1740	fi
	1741
	1742	LogAll "INFO: Moving boot info on $MINDI_TMP/mpt"
	1743	mv $MINDI_TMP/target/* $MINDI_TMP/mpt
[3528]	1744	if [ $? -ne 0 ] ; then
[3522]	1745	LogFile "--------------------------------"
	1746	LogFile "INFO: Size of $MINDI_TMP/mpt:"
	1747	du -sk $MINDI_TMP/mpt/* >> $LOGFILE
	1748	LogFile "--------------------------------"
[3546]	1749	sync
[3522]	1750	umount $MINDI_TMP/mpt
	1751	LogAll "ERROR: Problems while creating boot media."
	1752	LogAll " Please unload some of your modules and try again."
	1753	Die " Try to increase EXTRA_SPACE in $MINDI_CONFIG"
	1754	fi
	1755
	1756	if [ "$target" = "ISO" ]; then
[3534]	1757	if [ "$ARCH" != "ia64" ]; then
	1758	ISO_OPT="$ISO_OPT -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
	1759	fi
[3522]	1760	# ISO
[3533]	1761	if [ "$ARCH" != "ia64" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
[3534]	1762	CMD="$ISO_CMD $ISO_OPT"
[3532]	1763	MakeISO
[3522]	1764	else
[3534]	1765	if [ "$ARCH" = "ia64" ]; then
	1766	CMD="$ISO_CMD $ISO_OPT -b images/mindi-bootroot.img -c images/boot.cat"
	1767	else
	1768	# UEFI
	1769	echo "$CMD" \| grep -q "xorriso"
	1770	if [ $? -eq 0 ]; then
	1771	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot --efi-boot images/mindi-bootroot.img -no-emul-boot"
	1772	else
	1773	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
	1774	fi
	1775	fi
[3522]	1776	fi
	1777	fi
	1778
[3546]	1779	# Avoids graphical tool to keep the FS mounted
	1780	sync
[3522]	1781	umount $MINDI_TMP/mpt \|\| Die "Unable to unmount $MINDI_TMP/mpt"
	1782
	1783	if [ "$target" = "ISO" ]; then
[3532]	1784	cp $part $MINDI_CACHE
[3533]	1785	if [ "$ARCH" = "ia64" ] \|\| [ "$BOOT_TYPE" = "UEFI" ]; then
[3535]	1786	# We just need the EFI dir and the boot image for this case
[3536]	1787	mkdir -p $MINDI_TMP/mpt2 $MINDI_TMP/mpt/images $MINDI_TMP/mpt/archives
[3535]	1788	mount -o loop $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt2 2>> $LOGFILE
	1789	# We need again the kernel+initrd at the root for UEFI boot at least
	1790	cp -a $MINDI_TMP/mpt2/EFI $MINDI_TMP/mpt2/vmlinuz $MINDI_TMP/mpt2/initrd.img $MINDI_TMP/mpt
	1791	# We need the boot image now and what mindi needs at restore time as well
	1792	cp -a $MINDI_TMP/mpt2/images/all.tar.gz $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt/images
[3546]	1793	# Avoids graphical tool to keep the FS mounted
	1794	sync
[3535]	1795	umount $MINDI_TMP/mpt2
	1796	LogFile "----------- target dir content -----------"
	1797	LogFile "------------------------------------------"
	1798	ls -lR $MINDI_TMP/mpt >> $LOGFILE
	1799	LogFile "------------------------------------------"
[3532]	1800	MakeISO
[3522]	1801	fi
	1802	else
	1803	# USB
[1684]	1804	if [ "$ARCH" != "ia64" ] ; then
[2939]	1805	syslinux -v 2>&1 \| grep -q 4.02
	1806	if [ $? -eq 0 ]; then
	1807	# This buggy version of syslinux requires a call to --stupid and not -s
	1808	syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
	1809	res=$?
	1810	else
	1811	syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
	1812	res=$?
	1813	fi
	1814	if [ $res -ne 0 ] ; then
[2963]	1815	LogAll "----------- syslinux's errors --------------"
[1684]	1816	cat $MINDI_TMP/syslinux.log \|tee -a $LOGFILE
[2963]	1817	LogAll "------------------------------------------"
[3565]	1818	LogAll "ERROR: Failed to create USB image."
[1684]	1819	else
[2963]	1820	LogFile "INFO: Created bootable USB image on $USBDEVICE"
[1684]	1821	fi
	1822	rm -f $MINDI_TMP/syslinux.log
	1823	else
[2963]	1824	LogAll "ERROR: No USB boot support for ia64"
[1684]	1825	MindiExit -1
	1826	fi
[3522]	1827	fi
[1684]	1828	}
	1829
	1830
[3522]	1831	OfferToMakeBootableUSB() {
	1832
	1833	local i files
	1834
	1835	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
	1836	echo -en "\nShall I make a bootable USB device ? (y/[n]) "
	1837	read i
	1838	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1839	if [ "$USBDEVICE" = "" ]; then
	1840	echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
	1841	read dev
	1842	USBDEVICE=$dev
	1843	fi
	1844	echo "WARNING: This will erase all content on $USBDEVICE"
	1845	echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
	1846	read i
	1847	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1848	else
	1849	if [ "$PROMPT_MAKE_USB_IMAGE" = "no" ] && [ _"$MONDO_SHARE" = _"" ] && [ "$USBDEVICE" = "" ]; then
	1850	Die "No USBDEVICE environment variable declared, aborting"
	1851	fi
	1852	fi
	1853	USBPART="${USBDEVICE}1"
	1854
	1855	MakeBootableDevice USB
	1856	}
	1857
	1858
	1859	OfferToMakeBootableISO() {
	1860
	1861	local i files
	1862
	1863	if [ -z "$ISO_CMD" ]; then
	1864	LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
	1865	return
	1866	fi
	1867
	1868	if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
	1869	echo -en "\nShall I make a bootable CD image? (y/[n]) "
	1870	read i
	1871	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1872	fi
	1873
	1874	MakeBootableDevice ISO
	1875
	1876	}
	1877
	1878
[747]	1879	MakeMessageFile() {
[2292]	1880
	1881	if [ -x "/bin/lsb_release" ]; then
	1882	DESC=`/bin/lsb_release -d \| cut -d: -f2 \| sed "s/[ \t]*//"`
[3173]	1883	elif [ -r /etc/arch-release ]; then # this code must be written before /etc/issue test to avoid errors
	1884	DESC="Arch Linux"
	1885	if [ -r /var/log/pacman.log ]; then
	1886	# there are no releases but we can get the last system upgrade
	1887	# Output example: Arch Linux [2011-03-03 01:39]
	1888	DESC="$DESC $(tac /var/log/pacman.log \| grep -m1 'full system upgrade' \| cut -d']' -f1)]"
[2754]	1889	fi
[3426]	1890	elif [ -x "/etc/os-release" ]; then
	1891	DESC=`grep PRETTY_NAME /etc/os-release \| cut -d= -f2`
	1892	elif [ -x "/usr/bin/pbdistrocheck" ]; then
	1893	# For pb >= 0.9.8
	1894	DESC=`/usr/bin/pbdistrocheck -s \| cut -d, -f1-4 \| sed 's/,/-/g'`
[2732]	1895	elif [ -r /etc/issue.net ]; then
[2731]	1896	DESC=`head -1 /etc/issue.net`
[2732]	1897	elif [ -r /etc/issue ]; then
[2731]	1898	DESC=`head -1 /etc/issue`
[747]	1899	else
[2731]	1900	DESC="Unknown desc"
[747]	1901	fi
[2292]	1902	sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt \| sed "s/KKKKK/Kernel $KERVER/" \| sed "s/AAAAA/on a $ARCH architecture/" \| sed "s/TTTTT/`LC_TIME=C date`/" \| sed "s/MMMMM/`hostname`/" \| sed "s/DDDDD/$DESC/"
[1885]	1903	if [ _"$MONDO_SHARE" != _"" ]; then
	1904	if [ "$CDRECOVERY" != "yes" ] ; then
[3270]	1905	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3281]	1906	echo -en "Press <0eenter07> for 0cnetwork restore07\n"
[3278]	1907	echo -en "$BOOT_MEDIA_MESSAGE"
[1885]	1908	elif [ ! "$MINDI_TMP" ] ; then
[3522]	1909	echo -en "FYI, this is _not_ a MondoRescue CD.\n"
	1910	if [ -e "$MINDI_LIB/memtest.img" ] ; then
	1911	echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
	1912	fi
[1885]	1913	else
	1914	echo -en "$BOOT_MEDIA_MESSAGE"
[747]	1915	fi
[1983]	1916	else
	1917	echo -en "\
[747]	1918	To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
	1919	CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
[1983]	1920	fi
[747]	1921	fi
[3173]	1922
	1923	# Also create the other help screens
	1924	head -24 $MINDI_CONF/README.bootparam \| cut -c1-80 > $1/boot1.txt
	1925	head -48 $MINDI_CONF/README.bootparam \| tail -24 \| cut -c1-80 > $1/boot2.txt
	1926	head -24 $MINDI_CONF/README.pxe \| cut -c1-80 > $1/pxe.txt
[747]	1927	}
	1928
	1929
[1983]	1930	MakeBootConfFile() {
[1885]	1931	local options i ooo
[747]	1932	options=""
[1983]	1933	# Type of boot file (elilo or syslinux/isolinux)
	1934	type=$1
	1935	if [ "$type" = "elilo" ]; then
	1936	sep="="
[3398]	1937	sepdef="="
[1983]	1938	else
	1939	sep=" "
[3398]	1940	sepdef=" "
	1941	if [ "$type" = "grub" ]; then
	1942	sepdef="="
	1943	fi
[1983]	1944	fi
[925]	1945
[1983]	1946	# Generic header for conf file
[3398]	1947	if [ "$type" = "elilo" ]; then
	1948	echo -en "prompt\n"
	1949	elif [ "$type" = "grub" ]; then
	1950	echo -en "pause Press a key when ready to restore\n"
[3518]	1951	elif [ "$type" = "grub2" ]; then
	1952	echo -en "set "
[3398]	1953	else
[3535]	1954	# syslinux family
[3173]	1955	echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
[925]	1956	fi
[1983]	1957
	1958	# Compute which default option to boot from
[3398]	1959	echo -en "default${sepdef}"
[747]	1960	if [ "$CDRECOVERY" = "yes" ] ; then
[3398]	1961	if [ "$type" = "grub" ]; then
[3430]	1962	# TODO: Which num ???
[3398]	1963	echo -en "0\n"
	1964	else
	1965	echo -en "RESTORE\n"
	1966	fi
[1983]	1967	# In case it's mondoarchive
[1885]	1968	elif [ _"$MONDO_SHARE" != _"" ]; then
[3270]	1969	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3398]	1970	if [ "$type" = "grub" ]; then
	1971	echo -en "3\n"
	1972	else
	1973	echo -en "iso\n"
	1974	fi
[747]	1975	else
[3398]	1976	if [ "$type" = "grub" ]; then
	1977	echo -en "1\n"
	1978	else
	1979	echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
	1980	fi
[747]	1981	fi
	1982	else
[3398]	1983	if [ "$type" = "grub" ]; then
	1984	echo -en "0\n"
	1985	else
	1986	echo -en "expert\n"
	1987	fi
[747]	1988	fi
	1989
[1983]	1990	# Handle timeout
[3518]	1991	if [ "$type" = "grub" ]; then
	1992	sep='='
	1993	fi
[747]	1994	if [ "$CDRECOVERY" != "yes" ] ; then
[3053]	1995	echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
[1983]	1996	else
	1997	echo -en "timeout${sep}10000\n"
[747]	1998	fi
	1999	echo -en "\n"
[1983]	2000
[2124]	2001	# prepare which labels will be generated
[747]	2002	if [ "$CDRECOVERY" = "yes" ] ; then
[925]	2003	options="RESTORE expert"
[1885]	2004	else
	2005	if [ _"$MONDO_SHARE" != _"" ]; then
[2344]	2006	options="interactive expert compare iso nuke isonuke"
[747]	2007	else
	2008	options="expert"
[925]	2009	fi
[747]	2010	fi
[1983]	2011
	2012	# Generate rest of conf file
[747]	2013	for i in $options ; do
[925]	2014	ooo=$i
[3111]	2015	[ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
[1983]	2016	if [ "$type" = "elilo" ]; then
[2564]	2017	outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
[3398]	2018	elif [ "$type" = "grub" ]; then
[3415]	2019	outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
[3518]	2020	elif [ "$type" = "grub2" ]; then
[3535]	2021	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2022	lorder="linuxefi"
	2023	iorder="initrdefi"
	2024	else
	2025	lorder="linux"
	2026	iorder="initrd"
	2027	fi
	2028	outstr="menuentry '$i' {\n\tinsmod all_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod part_gpt\n\tinsmod ext2\n\tinsmod xfs\n\techo 'Loading kernel...'\n\t$lorder /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\techo 'Loading ramdisk...'\n\t$iorder /initrd.img\n}\n"
[925]	2029	else
[2073]	2030	ps="/"
[2629]	2031	if [ $KERNEL_IS_XEN = "no" ]; then
	2032	outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
	2033	else
	2034	outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
	2035	fi
[925]	2036	fi
[1885]	2037	echo -en "$outstr"
[747]	2038	done
[1983]	2039	if [ -e "$MINDI_LIB/memtest.img" ] ; then
	2040	if [ "$type" = "elilo" ]; then
	2041	echo -en "image=/memtest.bin\n\tlabel=memtest\n"
[2073]	2042	echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
[3398]	2043	elif [ "$type" = "grub" ]; then
[3415]	2044	echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
[3518]	2045	elif [ "$type" = "grub2" ]; then
	2046	echo -en "menuentry 'memtest' {\n\tload_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod xfs\n\tlinux /memtest\n\tinitrd /memtest.img\n}\n"
[1983]	2047	else
[2073]	2048	ps="/"
	2049	if [ "$type" = "syslinux" ]; then
	2050	ps=""
	2051	fi
	2052	echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
	2053	echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
[1983]	2054	fi
	2055	fi
[747]	2056	}
	2057
[2006]	2058	ParseModprobeForIncludes() {
	2059	local MODPROBE_CONF mpincfile includes include
	2060
	2061	MODPROBE_CONF=/etc/modprobe.conf
	2062	mpincfile=$1
	2063	touch $mpincfile
	2064	if [ -a $MODPROBE_CONF ]; then
[2431]	2065	includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF\|sort -u)
[2006]	2066	if [ -n "$includes" ]; then
	2067	for include in $includes
	2068	do
	2069	if [ -a "$include" ]; then
	2070	echo $include >> $mpincfile
	2071	fi
	2072	done
	2073	fi
	2074	fi
	2075	}
	2076
	2077
[747]	2078	PrepareDataDiskImages() {
[3522]	2079	local needlist bigdir diskdir res i j k lines lfiles includefile
[747]	2080
[3407]	2081	rm -f $MINDI_CACHE/mindi.iso
[940]	2082	needlist=$MINDI_TMP/what-we-need.txt
	2083	bigdir=$MINDI_TMP/bigdir
[747]	2084	mkdir -p $bigdir/usr/bin
[1983]	2085	mkdir -p $bigdir/usr/sbin
[2006]	2086	includefile=$MINDI_TMP/$$.includefile.txt
[747]	2087
[3149]	2088	lfiles=`ls $DEPLIST_DIR/* \| grep -v /minimal`
[2409]	2089	if [ -e "$DEPLIST_FILE" ]; then
[3149]	2090	lfiles="$DEPLIST_FILE $lfiles"
[2409]	2091	fi
[1885]	2092	lines=`grep -vx " #." $lfiles \| grep -vx "" \| wc -l`
[2006]	2093	ParseModprobeForIncludes $includefile
[2019]	2094	lines=$(($lines+`cat $includefile \| wc -l`))
[2006]	2095	cat $lfiles $includefile \| GenerateGiantDependencyList $needlist $lines
[747]	2096	res=$?
[2006]	2097	rm -f $includefile
[3231]	2098	ListKernelModulePaths >> $needlist
[747]	2099	if [ "$res" -ne "0" ] ; then
[1902]	2100	Die "You have $res files present in dependency list\nbut absent from filesystem."
[747]	2101	fi
	2102	mkdir -p $bigdir/tmp
[1885]	2103	if [ _"$MONDO_SHARE" != _"" ]; then
[3430]	2104	# TODO: no reason to have the cfg file stored twice
[3278]	2105	MakeMondoConfigFile $MINDI_TMP/$MRCFG
	2106	cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
[747]	2107	fi
[3281]	2108
	2109	# Needs to be done after the MRCFG creation
	2110	FindAndAddUserKeyboardMappingFile
	2111
[3166]	2112	[ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
[747]	2113	DropOptimizedLibraries $needlist $bigdir
[3522]	2114	echo -en "INFO: Assembling dependency files"
[747]	2115
[3522]	2116	CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist` 1
	2117	echo -e "$DONE"
[3149]	2118
[925]	2119	# also copy io.sys and msdos.sys, if we can find them
[747]	2120	for i in `mount \| cut -d' ' -f3` ; do
[925]	2121	for j in io.sys msdos.sys ; do
[963]	2122	[ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
[925]	2123	done
[747]	2124	done
	2125
[925]	2126	# master boot record, too
[940]	2127	i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
[3403]	2128	if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
[3149]	2129	LogAll "INFO: Backing up $i's MBR"
[925]	2130	dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
	2131	sleep 1
	2132	sync
	2133	j=$i
	2134	[ -h "$j" ] && j=`readlink -f $j`
[3149]	2135	LogAll "INFO: Creating /dev/boot_device ($j)"
[925]	2136	mkdir -p $bigdir/dev
[2089]	2137	cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE \|\| Die "Unable to create /dev/boot_device on ramdisk"
[747]	2138	fi
	2139
[1983]	2140	# Get terminfo content
	2141	ti="usr/share/terminfo/l"
	2142	if [ -d /$ti ]; then
[3522]	2143	mkdir -p $bigdir/$ti
	2144	cp -Rdf /$ti/* $bigdir/$ti 2>> $LOGFILE \|\| LogAll "ERROR: issue copying terminfo"
[747]	2145	fi
[1764]	2146	if [ -e "$MONDO_SHARE/restore-scripts" ]; then
[3543]	2147	cp -Rdf $MONDO_SHARE/restore-scripts/mondo/* $bigdir/usr/bin 2>> $LOGFILE
[3528]	2148	[ $? -ne 0 ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
[3543]	2149	cp -Rdf $MONDO_SHARE/restore-scripts/etc/* $bigdir/etc 2>> $LOGFILE
[747]	2150	fi
[2290]	2151	if [ -d "/lib/dev-state" ]; then
[3542]	2152	cp -a /lib/dev-state $bigdir/lib/ 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
[2290]	2153	fi
[747]	2154	TOTAL_BIGDIR_SIZE=`du -sk $bigdir \| cut -f1`
[940]	2155	MakeMountlist $MINDI_TMP/mountlist.txt
[2432]	2156	CheckMountlist $MINDI_TMP/mountlist.txt
[1902]	2157	mkdir -p $bigdir/tmp
[2092]	2158	cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE \|\| Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
[1885]	2159	if [ _"$MONDO_SHARE" != _"" ]; then
[1902]	2160	cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
[1885]	2161	fi
[2032]	2162	if [ $LVM != "false" ]; then
	2163	$MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
[3528]	2164	if [ $? -ne 0 ]; then
[2032]	2165	LVM="false"
	2166	rm -f $bigdir/tmp/i-want-my-lvm
[2552]	2167	else
[2963]	2168	LogFile "Your i-want-my-lvm file content is:"
	2169	LogFile "-----------------------------------"
[2552]	2170	cat $bigdir/tmp/i-want-my-lvm >> $LOGFILE
[2963]	2171	LogFile "-----------------------------------"
[2032]	2172	fi
	2173	fi
[3522]	2174	LogFile "INFO: Your mountlist.txt file content is:"
[2963]	2175	LogFile "-----------------------------------"
[1902]	2176	cat $bigdir/tmp/mountlist.txt >> $LOGFILE
[2963]	2177	LogFile "-----------------------------------"
[2432]	2178
[2092]	2179	echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
	2180	echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
[1902]	2181	if [ _"$MONDO_SHARE" != _"" ]; then
	2182	for q in filelist.full.gz biggielist.txt ; do
	2183	[ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
	2184	cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
	2185	done
	2186	fi
	2187
[3476]	2188	# copy (e)lilo/isolinux/grub/whatever stuff into it as well
[3419]	2189	# to get it on the media (in addition to the boot part
	2190	# and also to support UEFI boot mechanism
[3499]	2191	bootdir=$bigdir/syslinux
[3476]	2192	bootconf="$bootdir/syslinux.cfg"
[3499]	2193	boottype=syslinux
[3419]	2194	mkdir -p $bootdir
[3528]	2195	FindLdlinux32Binary
[3419]	2196	if [ "$BOOT_TYPE" != "BIOS" ]; then
	2197	if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
	2198	LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
	2199	MindiExit -1
	2200	fi
	2201	# EFI or UEFI
[3430]	2202	# TODO: names are hard-coded for now
[3419]	2203	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2204	# UEFI
[3476]	2205	efidir=$bigdir/EFI/BOOT
[3483]	2206	# On RHEL6 grub works
	2207	dname=`pbdistrocheck \| grep -E '^Name:' \| cut -d':' -f2`
	2208	dver=`pbdistrocheck \| grep -E '^Ver:' \| cut -d':' -f2`
	2209	if [ $dname = "rhel" ] && [ $dver = "6" ]; then
[3491]	2210	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
[3555]	2211	bootconf="$efidir/BOOTX64.conf"
[3483]	2212	boottype=grub
	2213	elif [ $dname = "rhel" ] && [ $dver = "7" ]; then
[3491]	2214	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
[3536]	2215	bootconf="$efidir/grub.cfg"
[3483]	2216	boottype=grub2
[3518]	2217	elif [ $dname = "debian" ] && [ $dver = "8" ]; then
	2218	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
	2219	bootconf="$efidir/grub.cfg"
	2220	boottype=grub2
[3491]	2221	else
	2222	# Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
	2223	FindSyslinux64EFI
	2224	bootbin=$SYSLINUX64EFI
	2225	bootconf="$efidir/syslinux.cfg"
[3483]	2226	fi
[3538]	2227
	2228	# Depending on the arch, the target boot file is different
	2229	if [ "$ARCH" = "x86_64" ] ; then
[3555]	2230	tgbin="BOOTX64.efi"
[3538]	2231	elif [ "$ARCH" = "armv8" ]; then
[3555]	2232	tgbin="BOOTAA64.efi"
[3538]	2233	else
	2234	# i?386
[3555]	2235	tgbin="BOOTIA32"
[3538]	2236	fi
[3419]	2237	else
	2238	# EFI
[3476]	2239	efidir=$bootdir
	2240	bootbin=`find /boot/efi -iname "elilo.efi" \| head -1`
[3538]	2241	tgbin=$bootbin
[3476]	2242	boottype=elilo
	2243	bootconf="$efidir/elilo.conf"
[3419]	2244	fi
[3522]	2245	LogAll "INFO: Found $boottype boot type"
[3419]	2246
	2247	# Copy it so that CD-ROM menu entry is satisfied
	2248	mountefi=0
	2249	df -T \| grep /boot/efi \| grep -qE 'vfat'
	2250	if [ $? -ne 0 ]; then
	2251	mount /boot/efi
	2252	if [ $? -ne 0 ]; then
[3522]	2253	echo "ERROR: You have to mount your (U)EFI partition when using mindi"
[3419]	2254	MindiExit -1
	2255	fi
	2256	mountefi=1
	2257	fi
[3476]	2258	mkdir -p $efidir
[3538]	2259	cp $bootbin $efidir/$tgbin
[3419]	2260	if [ $mountefi -eq 1 ]; then
	2261	umount /boot/efi 2>&1 > /dev/null
	2262	fi
[3479]	2263
[3499]	2264	if [ $boottype = "syslinux" ]; then
[3491]	2265	FindLdlinuxe64Binary
	2266	if [ -e "$LDLINUXE64" ]; then
	2267	LogFile "INFO: Copying $LDLINUXE64 to $efidir"
	2268	cp $LDLINUXE64 $efidir 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
[3542]	2269	cp $LDLINUXE64/../libutil.c32 $efidir 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
[3491]	2270	fi
[3479]	2271	fi
[3528]	2272	# In all cases prepare syslinux content for BIOS mode
	2273	# so that we can have multi boot mode media BIOS+UEFI
	2274	if [ -e "$LDLINUXC32" ]; then
	2275	LogFile "INFO: Copying $LDLINUXC32 to $bigdir/EFI"
	2276	cp $LDLINUXC32 "$bigdir/EFI" 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXC32 to $bigtdir/EFI. Did you run out of disk space?"
	2277	fi
	2278	else
[3479]	2279	# Useful for syslinux 5.x
	2280	if [ -e "$LDLINUXC32" ]; then
	2281	LogFile "INFO: Copying $LDLINUXC32 to $bootdir"
[3522]	2282	cp $LDLINUXC32 $bootdir 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXC32 to $bootdir. Did you run out of disk space?"
[3479]	2283	fi
[3419]	2284	fi
[3479]	2285
[3525]	2286	# Here we need to know the ramdisk_size
	2287	size_of_all_tools=`du -sk $bigdir \| cut -f1`
	2288	export ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
	2289	LogFile "INFO: Ramdisk will be $ramdisk_size KB"
	2290
[3476]	2291	MakeBootConfFile $boottype > $bootconf
[3554]	2292	LogFile "Boot Conf file $bootconf content is:"
	2293	LogFile "------------------------------------"
	2294	cat $bootconf >> $LOGFILE
	2295	LogFile "------------------------------------"
[3528]	2296	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2297	# Also generate the syslinux conf
	2298	MakeBootConfFile syslinux > "$bigdir/EFI/syslinux.cfg"
[3554]	2299	LogFile "Boot Conf file $bigdir/EFI/syslinux.cfg content is:"
	2300	LogFile "---------------------------------------------------"
[3557]	2301	cat $bigdir/EFI/syslinux.cfg >> $LOGFILE
[3554]	2302	LogFile "---------------------------------------------------"
[3528]	2303	fi
[3419]	2304
[3522]	2305	echo -en "INFO: Tarring and zipping the data content..."
[3407]	2306	(cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log \| gzip -9 > $MINDI_CACHE/all.tar.gz \|\| LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
[3149]	2307	LogFile "Size of the data content"
	2308	LogFile "------------------------"
[3407]	2309	du -sk $MINDI_CACHE/*gz >> $LOGFILE
[3149]	2310	LogFile "------------------------"
[1902]	2311	echo -e "$DONE"
	2312
[3565]	2313	[ "$bigdir" != "/" ] && rm -rf $bigdir
[747]	2314	rm -f $needlist
	2315	}
	2316
	2317
	2318	Prompt() {
	2319	echo -en "$1"
	2320	read line
	2321	}
	2322
	2323
	2324	ReadLine() {
	2325	local i incoming
	2326	read incoming
	2327	i=0
	2328	while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
[925]	2329	i=$(($i+1))
	2330	read incoming
[747]	2331	done
	2332	echo "$incoming"
	2333	}
	2334
	2335
	2336	SizeOfPartition() {
	2337	local devpath drive res stub
	2338	device=$1
[2917]	2339	if [ "`echo "$device" \| grep -E "^/dev/"`" = "" ] ; then
	2340	Die "Cannot find $device's size - is your /etc/fstab sane?"
	2341	fi
[747]	2342	if [ "`echo "$device" \| grep -F "/dev/md"`" != "" ] ; then
[925]	2343	res=`SizeOfRaidPartition $device`
	2344	[ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
	2345	echo "$res"
	2346	return 0
[747]	2347	fi
[925]	2348	# patch from Bill <bill@iwizard.biz> - 2003/08/25
[960]	2349	res=`$FDISK -s $device 2>> $LOGFILE`
[925]	2350	# end patch
[2448]	2351	# take only the first in case of multiple mount (cifs, nfs, ...)
	2352	[ "$res" = "" ] && res=`df -k -P -x supermount \| tr -s '\t' ' ' \| grep -F "$device " \| cut -d' ' -f2 \| head -1`
[747]	2353	[ "$res" = "" ] && res="-1"
	2354	echo $res
	2355	return 0
	2356	}
	2357
	2358
	2359	SizeOfRaidPartition() {
	2360	local real_dev smallest_size silly tmp
	2361
	2362	silly=999999999
	2363	smallest_size=$silly
	2364
	2365	for real_dev in `GetRaidDevMembers $1` ; do
[925]	2366	tmp=`SizeOfPartition $real_dev`
	2367	[ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
[747]	2368	done
	2369
	2370	if [ "$smallest_size" = "$silly" ] ; then
[925]	2371	echo "-1"
	2372	return 1
[747]	2373	else
[925]	2374	echo "$smallest_size"
	2375	return 0
[747]	2376	fi
	2377	}
	2378
	2379
	2380	StripExecutable()
	2381	{
	2382	local tmpfile
[925]	2383
[940]	2384	tmpfile=$MINDI_TMP/stripped.$$.dat
[747]	2385	[ -d "$1" ] \|\| [ -h "$1" ] && return
[963]	2386	cp -f $1 $tmpfile 2>> $LOGFILE
[747]	2387	strip $tmpfile 2> /dev/null
[3528]	2388	if [ $? -eq 0 ] ; then
[963]	2389	cp -f $tmpfile $1 2>> $LOGFILE
[2963]	2390	LogFile "INFO: Stripped binary $2"
[747]	2391	fi
	2392	rm -f $tmpfile
	2393	}
	2394
[2292]	2395	KernelVer() {
	2396	local fkern_ver fname
[747]	2397
[2292]	2398	fname=$1
	2399	file $fname \| grep -q gzip
[3528]	2400	if [ $? -eq 0 ] ; then
[2292]	2401	# Used by ia64
[3528]	2402	fkern_ver=`gzip -cd $fname \| strings 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
[2292]	2403	else
[3528]	2404	fkern_ver=`strings $fname 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
[2292]	2405	fi
	2406	echo "$fkern_ver"
	2407	}
	2408
	2409
[2880]	2410	# WARNING: This function should just echo the final result !!!
	2411	#
[747]	2412	TryToFindKernelPath() {
[2880]	2413	local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
[925]	2414
[2292]	2415	we_want_version=$KERVERRUN
[747]	2416	possible_kernels=""
	2417	duff_kernels=""
[2880]	2418	output=""
[3368]	2419
[747]	2420	if [ "$ARCH" = "ia64" ] ; then
	2421	root="/boot/efi/efi"
	2422	else
	2423	root="/"
	2424	fi
[2681]	2425	# See if we're booted from a Xen kernel
[2889]	2426	# From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
	2427	if [ -f /proc/xen/capabilities ]; then
[2681]	2428	# It's a Xen kernel
	2429	KERNEL_IS_XEN="yes"
[2963]	2430	LogFile "INFO: It's a Xen kernel..."
[2681]	2431	fi
	2432
[3122]	2433	for fname in `find $root -maxdepth 2 -type f \| grep -Ei 'lin\|kern\|xen' \| grep -Ev '^/proc/\|^/net/\|^/mnt\|^/lib\|^/lib64\|^/bin\|^/sbin\|^/usr\|^/tmp'` ; do
[925]	2434	[ ! -e "$fname" ] && continue
[747]	2435	[ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
[2292]	2436	fkern_ver=`KernelVer $fname`
[747]	2437	[ "$fkern_ver" = "" ] && continue
	2438	[ "`echo "$fkern_ver" \|grep -F "$we_want_version "`" = "" ] && continue
[925]	2439	[ -f "$fname" ] \|\| continue
	2440	[ -h "$fname" ] && continue
	2441	kdate=`uname -v \| $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' \| $AWK '{print $NF;}'`
	2442	file $fname \| grep -q gzip
[3528]	2443	if [ $? -eq 0 ] ; then
[925]	2444	# Used by ia64
	2445	if [ "`gzip -cd $fname \| strings 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[2880]	2446	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
[925]	2447	duff_kernels="$fname $duff_kernels"
	2448	else
[747]	2449	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2450	possible_kernels="$fname $possible_kernels"
[925]	2451	fi
[747]	2452	else
[925]	2453	if [ "`strings $fname 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[2880]	2454	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
[925]	2455	duff_kernels="$fname $duff_kernels"
	2456	else
[747]	2457	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2458	possible_kernels="$fname $possible_kernels"
[925]	2459	fi
[747]	2460	fi
	2461	done
	2462	if [ ! "$possible_kernels" ] && uname -a \| grep Knoppix > /dev/null ; then
[3535]	2463	possible_kernels=`find /boot/vmlinuz-[2-9].* \| tail -n1`
[747]	2464	fi
	2465	if [ ! "$possible_kernels" ] ; then
[3149]	2466	LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
[747]	2467	possible_kernels="$duff_kernels"
	2468	if [ ! "$possible_kernels" ] ; then
[3149]	2469	LogAll "INFO: Sorry, no duff kernels either"
[747]	2470	else
[3149]	2471	LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
	2472	LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
[747]	2473	fi
	2474	fi
[2681]	2475	if [ $KERNEL_IS_XEN = "yes" ]; then
	2476	possible_xenkernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -i "xen" \| sort -u \| tr '\n' ' '`
	2477	noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
	2478	fi
[2829]	2479	possible_kernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -vi "xen" \| sort -u \| tr '\n' ' '`
	2480	noof_kernels=`CountItemsIn "$possible_kernels"`
[747]	2481	if [ "$noof_kernels" -eq "0" ] ; then
[3149]	2482	LogAll "Could not find your kernel."
[925]	2483	if [ -e "/boot/vmlinuz" ] ; then
[3149]	2484	LogAll "INFO: Using /boot/vmlinuz as a last resort."
[925]	2485	output=/boot/vmlinuz
[747]	2486	else
[925]	2487	output=""
	2488	fi
[747]	2489	elif [ "$noof_kernels" -eq "1" ] ; then
[2880]	2490	kp=`echo "$possible_kernels" \| sed s/' '//`
[2963]	2491	LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
[2880]	2492	output="$kp"
[747]	2493	else
	2494	for i in $possible_kernels ; do
[2880]	2495	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
[3149]	2496	LogAll "INFO: OK, I used my initiative and found that "
	2497	LogAll "INFO: $i is probably your kernel. "
[925]	2498	output="$i"
[2858]	2499	break
[925]	2500	fi
[747]	2501	done
[2858]	2502	if [ ! -n "$output" ]; then
[2880]	2503	if [ "`echo " $possible_kernels " \| grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
[2681]	2504	output=/boot/vmlinuz
[2963]	2505	LogFile "INFO: Schlomo, this one's for you."
[2681]	2506	else
[2963]	2507	LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
	2508	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
	2509	LogFile "INFO: $possible_kernels"
[2880]	2510	output=""
[2681]	2511	fi
	2512	fi
	2513	fi
	2514	if [ $KERNEL_IS_XEN = "yes" ]; then
	2515	if [ "$noof_xenkernels" -eq "0" ]; then
	2516	xenkernelpath=""
	2517	elif [ "$noof_xenkernels" -eq "1" ]; then
	2518	xenkernelpath=`echo "$possible_xenkernels" \| sed s/' '//`
[2963]	2519	LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
[925]	2520	else
[2681]	2521	for i in $possible_xenkernels ; do
[2880]	2522	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
[2963]	2523	LogFile "INFO: OK, I used my initiative and found that "
	2524	LogFile "INFO: $i is probably your Xen kernel. "
[2681]	2525	xenkernelpath="$i"
[2858]	2526	break
[2681]	2527	fi
	2528	done
[2858]	2529	if [ ! -n "$xenkernelpath" ]; then
[2681]	2530	new_possible_xenkernels=`echo "$possible_xenkernels" \| tr -s ' ' '\n' \| grep -E "^/boot" \| sort -u \| tr '\n' ' '`
	2531	if [ ! -n "$new_possible_xenkernels" ]; then
	2532	xenkernelpath=`echo $new_possible_xenkernels \| tr -s ' ' '\n' \| head -1`
[2963]	2533	LogFile "INFO: Using $xenkernelpath"
[2681]	2534	else
[2963]	2535	LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
	2536	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
	2537	LogFile "INFO: $possible_xenkernels"
[2880]	2538	output=""
[2681]	2539	xenkernelpath=`echo $possible_xenkernels \| tr -s ' ' '\n' \| head -1`
[2963]	2540	LogFile "INFO: Using $xenkernelpath"
[2681]	2541	fi
	2542	fi
[925]	2543	fi
[2681]	2544	if [[ -z "$xenkernelpath" \|\| ! -f "$xenkernelpath" ]]; then
	2545	Die "Cannot find Xen kernel $xenkernelpath, aborting"
	2546	fi
[747]	2547	fi
[3357]	2548	#LogAll "TryToFindKernelPath found $output"
[2681]	2549	echo "$output"
[747]	2550	}
	2551
	2552
[3522]	2553	MakeBootInitFile() {
	2554	local tgz_dir_fname rdz_fname tempfile nodes kernelsize res currsize not_copied j k s w needed_modules_path d thelink templog
[925]	2555
[747]	2556	tgz_dir_fname=$1
	2557	rdz_fname=$2
[1983]	2558	kernelsize=$3
[940]	2559	tempfile=$MINDI_TMP/temp.rd
[3403]	2560	res=0
	2561	templog=$MINDI_TMP/$$.log
	2562	> $templog
	2563
[3522]	2564	LogAll "INFO: Making Boot RAM Disk ($ramdisk_size KB)"
	2565	dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null \|\| Die "Not enough room for temporary ramdisk (MakeBootInitFile)"
	2566	LogAll "INFO: Creating ext2 filesystem on $tempfile"
[1764]	2567	mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE \|\| Die "Unable to create an ext2 file system on $tempfile"
[747]	2568	mkdir -p $mountpoint
	2569	mount -t ext2 -o loop $tempfile $mountpoint \|\| Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
[2034]	2570
[3248]	2571	# Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
	2572	for d in bin sbin lib lib64; do
	2573	if [ -h "/$d" ]; then
	2574	thelink=`readlink /$d`
[3565]	2575	mkdir -p $mountpoint/$thelink \|\| LogAll "ERROR: Unable to create $thelink in $mountpoint."
[3248]	2576	mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
	2577	if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
	2578	rmdir $mountpoint/$d
	2579	fi
	2580	if [ ! -h $mountpoint/$d ]; then
	2581	rm -f $mountpoint/$d 2> /dev/null
[3565]	2582	(cd $mountpoint ; ln -s $thelink $d) \|\| LogAll "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
[3248]	2583	fi
	2584	fi
	2585	done
[3357]	2586
[3248]	2587	LogFile "INFO: what is now in $mountpoint"
[3522]	2588	ls -al $mountpoint >> $LOGFILE
[3172]	2589
[2963]	2590	# Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
[3357]	2591	# copy from rootfs into mountpoint
[3522]	2592	LogAll "INFO: Copying Mindi files onto $mountpoint"
[2963]	2593	for f in $tgz_dir_fname/*; do
	2594	if [ ! -r $f ]; then
	2595	Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
	2596	else
[3522]	2597	cp -af $f $mountpoint 2>&1 >> $LOGFILE
[2963]	2598	fi
	2599	done
[3522]	2600	(cd $mountpoint/etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
	2601	(cd $mountpoint ; ln -sf usr/sbin/init linuxrc)
[1914]	2602
[3522]	2603	(cd $mountpoint/dev ; tar -zxf dev-entries.tgz \|\| Die "Cannot untar dev-entries.tgz" ; rm -f dev-entries.tgz)
[747]	2604
	2605	for w in insmod.static insmod.static.old ; do
[925]	2606	s=`which $w 2> /dev/null`
	2607	if [ -e "$s" ] ; then
[3522]	2608	tar cf - -C / $s 2> /dev/null \| (cd $mountpoint ; tar xf -)
[925]	2609	fi
[747]	2610	done
	2611
	2612	[ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
[2951]	2613
[2438]	2614	# Copy of files mandatory for ssh to automate mount if sshfs is used
[3358]	2615	mkdir -p $mountpoint/.ssh $mountpoint/tmp
[3204]	2616	cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
[3241]	2617	cat > $mountpoint/tmp/myssh << EOF
[2438]	2618	ssh -o StrictHostKeyChecking=no $*
	2619	EOF
	2620	chmod 755 $mountpoint/tmp/myssh
	2621
[2039]	2622	# Copy of files mandatory for ld.so
[3204]	2623	cp -a /etc/ld.so.c* $mountpoint/etc
[2039]	2624
[2951]	2625	# Handle the case where busybox and mount are dynamically linked
[3231]	2626	file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 \| grep -q "dynamically"
[2951]	2627	if [ $? -eq 0 ]; then
	2628	# We want to use the real mount and all the supported variants (nfs, cifs, ...)
[3565]	2629	rm -f $mountpoint/bin/mount
[2951]	2630	fi
	2631
[3522]	2632	# Copy of files from the minimal env needed as per the deplist.d/minimal.conf (which includes all busybox deps)
	2633	echo -en "INFO: Gathering dependencies of required files..."
[3081]	2634	rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
[3522]	2635	lines=`cat $DEPLIST_DIR/minimal.conf \| grep -vE " #.\|^#" \| sort -u`
	2636	noof_lines=`echo $lines \| wc -w`
	2637	progress=0
	2638	for f in $lines; do
[3277]	2639	if [ -d $f ]; then
	2640	for g in `find $f`; do
	2641	echo $g >> $MINDI_TMP/minimal.lis
	2642	LocateDeps $g >> $MINDI_TMP/minimal2.lis
	2643	done
	2644	else
	2645	if [ -r $f ]; then
	2646	echo $f >> $MINDI_TMP/minimal.lis
	2647	LocateDeps $f >> $MINDI_TMP/minimal2.lis
	2648	fi
[3081]	2649	fi
[3522]	2650	progress=$(($progress+1))
	2651	LogProgress $progress $noof_lines
[2951]	2652	done
[3522]	2653	echo -e "$DONE"
	2654	echo -en "INFO: Processing all dependencies links..."
	2655	lines=`sort -u $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis`
	2656	noof_lines=`echo $lines \| tr ' ' '\n' \| wc -l`
	2657	progress=0
	2658	for f in $lines; do
[3231]	2659	mr-read-all-link $f >> $MINDI_TMP/minimal.lis
[3522]	2660	progress=$(($progress+1))
	2661	LogProgress $progress $noof_lines
[2951]	2662	done
[3522]	2663	echo -e "$DONE"
[2951]	2664	# Initial / are trucated by tar
[3014]	2665	finallist=""
[3204]	2666	# Remove directories from the list, as tar/cp will create them anyway
[3014]	2667	# and it may hurt if /lib is in it as on Debian/Ubuntu
[3166]	2668	# recent bash says that -d is true for a link to a dir !
[3014]	2669	for f in `sort -u $MINDI_TMP/minimal.lis`; do
[3479]	2670	if [ -e "$f" -a ! -d "$f" ] \|\| [ -h $f ]; then
[3357]	2671	# Do not overwrite files already in destination (avoid using option -n of cp not portable)
	2672	if [ ! -e "$mountpoint/$f" ]; then
	2673	finallist="$finallist $f"
	2674	fi
[3014]	2675	fi
	2676	done
[3357]	2677	rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
	2678
[3522]	2679	fnllist=`echo $finallist \| tr ' ' '\n' \| sort -u \| tr '\n' ' '`
	2680	LogFile "INFO: Copy the minimal env with cp -a --parents $fnllist -t $mountpoint"
[3565]	2681	cp -a --parents $fnllist -t $mountpoint 2> $templog \|\| LogAll "WARNING: Problem in minimal analysis" $templog
[3000]	2682
[3357]	2683	# In case target /bin dir still doesn't exist, create it before using it
	2684	if [ ! -d $mountpoint/bin ]; then
	2685	mkdir -p $mountpoint/bin
	2686	fi
	2687
	2688	# For older distributions expecting /sbin/init provides it
[3525]	2689	if [ ! -e "$mountpoint/sbin/init" ]; then
[3522]	2690	(cd $mountpoint/sbin ; ln -sf ../usr/sbin/init .)
[3357]	2691	fi
	2692
[3000]	2693	# To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
[3522]	2694	(cd $mountpoint ; ln -sf /bin/bash bin/sh)
[3405]	2695	LogFile "INFO: Using bash as default shell"
[2951]	2696
	2697	# Avoids an issue on some distro (RHEL5)
[2164]	2698	rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
	2699
[1724]	2700	# Management of udev (which includes modprobe in rules)
[1759]	2701	ps auxww \| grep -v grep \| grep -qw udevd
[1716]	2702	if [ $? -eq 0 ]; then
[1914]	2703	echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
[3405]	2704	LogFile "INFO: udev device manager found"
[3565]	2705	tar cf - -C / /etc/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /etc/udev analysis" $templog
[3204]	2706	# This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
[3565]	2707	rm -f $mountpoint/etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
[2894]	2708	# Do not do it if it's a link (Ubuntu 64 bits #503)
[3197]	2709	if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
[3565]	2710	tar cf - -C / /lib64/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /lib64/udev analysis" $templog
[2894]	2711	fi
[2895]	2712	if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [ ! -h "/lib32/udev" ]; then
[3565]	2713	tar cf - -C / /lib32/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /lib32/udev analysis" $templog
[2895]	2714	fi
	2715	if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [ ! -h "/lib/udev" ]; then
[3565]	2716	tar cf - -C / /lib/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /lib/udev analysis" $templog
[2895]	2717	fi
[3261]	2718	if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [ ! -h "/usr/lib/udev" ]; then
[3565]	2719	tar cf - -C / /usr/lib/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /usr/lib/udev analysis" $templog
[3261]	2720	fi
[3489]	2721	if [ -x /sbin/udevd ] \|\| [ -x /usr/bin/udevd ] \|\| [ -x /usr/lib/systemd/systemd-udevd ] \|\| [ -x /lib/systemd/systemd-udevd ]; then
[2964]	2722	lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
[1781]	2723	lis=""
	2724	# Get only the files which exist in that list
[1815]	2725	# and potentially their symlink structure
[1781]	2726	for i in $lis2; do
[1815]	2727	if [ -h $i ]; then
	2728	j=$i
	2729	while [ -h $j ]; do
	2730	lis="$lis $j"
[3204]	2731	j=`readlink -f $j`
[1815]	2732	done
	2733	lis="$lis $j"
[3525]	2734	elif [ -d $i ]; then
	2735	lis3="$lis3 $i"
[1815]	2736	elif [ -f $i ]; then
[1781]	2737	lis="$lis $i"
	2738	fi
	2739	done
	2740	# And their deps
[1759]	2741	LocateDeps $lis > $MINDI_TMP/udev.lis
	2742	for i in $lis; do
	2743	if [ "`echo $i \| cut -c1`" = "/" ]; then
	2744	j=`echo $i \| cut -c2-`
[3565]	2745	[ "$j" != "" ] && rm -f $mountpoint/$j
[1759]	2746	fi
[3204]	2747	echo "$i" >> $MINDI_TMP/udev.lis
[1759]	2748	done
[3257]	2749	finallist=""
	2750	# Remove directories from the list, as tar/cp will create them anyway
	2751	# and it may hurt if /lib is in it as on Debian/Ubuntu
	2752	# recent bash says that -d is true for a link to a dir !
	2753	for f in `sort -u $MINDI_TMP/udev.lis`; do
[3479]	2754	if [ -e "$f" -a ! -d "$f" ] \|\| [ -h "$f" ]; then
[3357]	2755	# Do not overwrite files already in destination (avoid using option -n of cp not portable)
	2756	if [ ! -e "$mountpoint/$f" ]; then
	2757	finallist="$finallist $f"
	2758	fi
[3257]	2759	fi
	2760	done
[3525]	2761	# But adds the directory useful for udev in $lis3
[3522]	2762	fnllist=`echo $finallist \| tr ' ' '\n' \| sort -u \| tr '\n' ' '`
	2763	LogFile "INFO: Copying udev related files with cp -a --parents $fnllist -t $mountpoint/"
[3565]	2764	cp -a --parents $fnllist $lis3 -t $mountpoint/ 2> $templog \|\| LogAll "WARNING: Problem in udev.lis analysis" $templog
[1721]	2765	rm -f $MINDI_TMP/udev.lis
[1720]	2766	else
[2965]	2767	LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
[2963]	2768	LogAll " mindi will use static devices which may cause problems"
[1914]	2769	rm -f $mountpoint/tmp/USE-UDEV
[1720]	2770	fi
[1716]	2771	fi
[1786]	2772
[2882]	2773	# Management of potential HW info (ProLiant only at the moment)
[1880]	2774	rm -rf $MINDI_CACHE/bkphw
	2775	mindi-bkphw $MINDI_CACHE $MINDI_CONF \| tee -a $LOGFILE
	2776	if [ -d $MINDI_CACHE/bkphw ]; then
[3565]	2777	LogAll "INFO: Hardware Information found and saved ..."
[3522]	2778	cp -rp $MINDI_CACHE/bkphw $mountpoint
[1880]	2779	if [ -f $MINDI_CACHE/tools.files ]; then
	2780	lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
[1863]	2781	LocateDeps $lis > $MINDI_TMP/tools.lis
[3565]	2782	tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in tools.lis analysis" $templog
[1863]	2783	fi
[1880]	2784	if [ -f $MINDI_CACHE/mindi-rsthw ]; then
[3522]	2785	mv -f $MINDI_CACHE/mindi-rsthw $mountpoint
	2786	chmod 755 $mountpoint/mindi-rsthw
[1761]	2787	fi
[1880]	2788	rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
[1761]	2789	fi
	2790
[2183]	2791	# Management of perl scripts delivered needed at restore time
[3522]	2792	LogAll "INFO: Analyzing perl modules dependencies..."
[3565]	2793	mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]bin/mr- 2> $templog > $MINDI_TMP/perl.lis \|\| LogAll "ERROR: Problem in mindi-get-perl-modules" $templog
[3405]	2794	LogFile "DBG4: Perl Modules found:"
	2795	LogFile "-------------------------"
[3403]	2796	cat $MINDI_TMP/perl.lis >> $LOGFILE
[3405]	2797	LogFile "-------------------------"
[3565]	2798	tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in perl scripts analysis" $templog
[2183]	2799
[1885]	2800	for w in cdrom groovy-stuff ; do
[747]	2801	mkdir -p mnt/$w
	2802	done
	2803
[3565]	2804	tar cf - -C / /dev/fd0[1,2][4,7,8] 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in fd dev analysis" $templog
[1721]	2805
[1885]	2806	needed_modules=""
[1993]	2807	list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
[1885]	2808
[3270]	2809	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[747]	2810	# For PXE boot
	2811	list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
	2812	fi
[1727]	2813	for i in $DENY_MODS; do
[2963]	2814	LogFile "INFO: Removing $i from the list of modules to load"
[1727]	2815	list_of_groovy_mods=`echo ${list_of_groovy_mods} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
	2816	done
	2817
[3253]	2818	if [ "${kernelname}" != "" ]; then
	2819	needed_modules_path=lib/modules/${kernelname}
[3257]	2820	mkgmopt="-k ${kernelname}"
[3253]	2821	else
	2822	needed_modules_path=lib/modules/$KERVERRUN
	2823	mkgmopt="-k $KERVERRUN"
	2824	fi
[1914]	2825
[3565]	2826	[ -e "/$needed_modules_path" ] \|\| LogAll "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then mindi won't probably work."
[3522]	2827	LogAll "INFO: Analyzing kernel modules dependencies..."
[3253]	2828	needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
	2829
[3257]	2830	LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
[3565]	2831	cp --parents -aL $needed_modules $mountpoint/ 2> $templog \|\| LogAll "ERROR: Unable to copy modules to $mountpoint" $templog
[3253]	2832
	2833	# Uncompress modules if not using udev and native modprobe
	2834	if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
	2835	for i in $needed_modules; do
	2836	if [ "`echo "$i" \| grep -E ".gz$"`" ]; then
[1727]	2837	gunzip -f $mountpoint/$i
[1815]	2838	fi
[3253]	2839	if [ "`echo "$i" \| grep -E ".bz$"`" ]; then
	2840	bunzip2 -f $mountpoint/$i
	2841	fi
	2842	if [ "`echo "$i" \| grep -E ".xz$"`" ]; then
	2843	unxz -f $mountpoint/$i
	2844	fi
	2845	LogFile "INFO: Uncompressing $i"
	2846	done
	2847	fi
[1815]	2848
[2964]	2849	# Also copy modules.* in case of udev so that normal modprobe works
[3565]	2850	tar cf - -C / /$needed_modules_path/modules.* 2> $templog \| (cd "$mountpoint" ; tar xf -) \|\| LogAll "ERROR: Unable to copy modules.* to $mountpoint" $templog
[1815]	2851
[2680]	2852	# Copy FW in case some drivers needs it
[3163]	2853	for d in "/lib" "/usr/lib"; do
[3201]	2854	if [ -d "$d/firmware" -a ! -h $d ]; then
[3166]	2855	cp -a "$d/firmware" "$mountpoint/$d"
[3163]	2856	fi
	2857	done
[2680]	2858
[3163]	2859	# Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
	2860	for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
[3201]	2861	if [ -d "$d/multipath" -a ! -h $d ]; then
[3166]	2862	cp -a "$d/multipath" "$mountpoint/$d"
[3163]	2863	fi
	2864	done
	2865
[3326]	2866	# Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
[3479]	2867	(cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e "$mountpoint/bin/$i" ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done)
[3324]	2868
[2913]	2869	# Copy an additional ProLiant tool for OBDR support
	2870	if [ -f $MINDI_TMP/OBDR ]; then
[3117]	2871	found=0
[2913]	2872	if [ -x /usr/bin/hpsa_obdr_mode ]; then
	2873	mkdir -p $mountpoint/usr/bin
	2874	cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
[3565]	2875	LogAll "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
[3117]	2876	found=1
	2877	fi
	2878	if [ -x /usr/bin/sg_wr_mode ]; then
	2879	mkdir -p $mountpoint/usr/bin
[3135]	2880	lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
[3118]	2881	LocateDeps $lis > $MINDI_TMP/obdr.lis
[3565]	2882	tar cf - $lis -C / `sort -u $MINDI_TMP/obdr.lis` 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in obdr.lis analysis" $templog
	2883	LogAll "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
[3117]	2884	found=1
	2885	fi
	2886	if [ $found -eq 0 ]; then
	2887	LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
[2913]	2888	LogAll " This may lead to a tape not going back to sequential mode after OBDR boot"
	2889	fi
	2890	fi
	2891
[3499]	2892	if [ ! -e "/sbin/devfsd" ]; then
[2963]	2893	LogFile "INFO: Deleting devfsd daemon from ramdisk"
[2995]	2894	[ ! -e "/sbin/devfsd" ] && LogFile " ...because /sbin/devfsd not found"
[747]	2895	rm -f $mountpoint/sbin/devfsd
	2896	fi
	2897	[ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
[1885]	2898	if [ _"$MONDO_SHARE" != _"" ]; then
[3278]	2899	MakeMondoConfigFile $mountpoint/tmp/$MRCFG
	2900	cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE \|\| Die "Cannot copy $MRCFG to ramdisk"
[2092]	2901	cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE \|\| Die "Cannot copy mountlist to ramdisk"
[747]	2902	echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
	2903	echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
	2904	fi
[3310]	2905
	2906	# Create module list to load at restore time
	2907	rm -f $mountpoint/tmp/modules
	2908	for m in $CDROM_MODS; do
	2909	echo $m >> $mountpoint/tmp/modules
	2910	done
	2911
[747]	2912	mkdir -p $mountpoint/proc
[2963]	2913	LogFile "---------------------------"
[3372]	2914	LogFile "Size of initial ramdisk:"
	2915	LogFile "---------------------------"
	2916	(cd "$mountpoint" ; du -sh .) >> $LOGFILE
	2917	LogFile "---------------------------"
[2963]	2918	LogFile "Content of initial ramdisk:"
	2919	LogFile "---------------------------"
[2712]	2920	(cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
[2963]	2921	LogFile "---------------------------"
[2438]	2922
[1230]	2923	# Determine what filesystem to use for initrd image
[2963]	2924	LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
[1230]	2925	gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
	2926	[ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
[3008]	2927	if [ "$gvFileSystem" = "ext2fs" ] \|\| [ "$gvFileSystem" = "ext3fs" ] \|\| [ "$gvFileSystem" = "ext4fs" ]; then
[1230]	2928	# say what will be used
[2963]	2929	LogFile "INFO: Creating an $gvFileSystem initrd image..."
[1230]	2930	# kernel expects linuxrc in ext2 filesystem
[3522]	2931	(cd "$mountpoint" && ln -sf usr/sbin/init linuxrc)
[1230]	2932	# unmount loop filesystem and create image file using the standard approach
[3546]	2933	sync
[1230]	2934	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
[3522]	2935	dd if=$tempfile bs=1k of=${rdz_fname}.tmp > /dev/null 2> /dev/null
[3008]	2936	if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
	2937	bs=`/sbin/tune4fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
	2938	else
	2939	bs=`tune2fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
	2940	fi
[2564]	2941	MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
[1799]	2942	gzip -c9 ${rdz_fname}.tmp > $rdz_fname
[1764]	2943	rm -f ${rdz_fname}.tmp
[1230]	2944	# log that we are done
[2390]	2945	elif [ "$gvFileSystem" = "initramfs" ]; then
[1230]	2946	# say what will be used
[2963]	2947	LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
[1230]	2948	# make sure that cpio is there
	2949	which cpio &> /dev/null; [ $? -eq 0 ] \|\| Die "cpio not found. Please install package cpio and try again."
	2950	# kernel expects init in cpio filesystem
[3522]	2951	(cd "$mountpoint" ; ln -sf usr/sbin/init init)
[1230]	2952	# create cpio image file and unmount loop filesystem
[3524]	2953	(cd "$mountpoint" ; find . -print \| cpio -o -H newc 2> /dev/null \| gzip -9 > $rdz_fname)
[3546]	2954	sync
[1230]	2955	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
	2956	# log that we are done
[2390]	2957	else
[1230]	2958	Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
[2390]	2959	fi
	2960
[747]	2961	if [ "$res" -eq "0" ] ; then
[3525]	2962	LogAll "INFO: MakeBootInitFile finished without error."
[747]	2963	else
[3525]	2964	LogAll "WARNING: MakeBootInitFile exits WITH ERRORS."
[747]	2965	fi
	2966	return 0
	2967	}
	2968
	2969
	2970	##############################################################################
[1021]	2971	#----------------------------------- Main -----------------------------------#
[747]	2972	##############################################################################
	2973
[1885]	2974	# Now we can create what we need
	2975	mkdir -p $MINDI_TMP
[747]	2976
[2995]	2977	# --nolog needs to be first, and is used in analyze-my-lvm
	2978	if [ "$1" = "--nolog" ] ; then
	2979	shift
	2980	LOGFILE=/dev/stderr
	2981	else
	2982	> $LOGFILE
	2983	fi
[1885]	2984	if [ "$1" = "--printvar" ] ; then
	2985	shift
	2986	if [ _"$1" != _"" ] ; then
	2987	set \| grep -Ew "^$1" \| cut -d= -f2
	2988	fi
[2183]	2989	exit 0
[1885]	2990	fi
	2991
[2963]	2992	LogFile "mindi v$MINDI_VERSION"
[3513]	2993	LogFile "-----------------------------"
	2994	LogFile "Start date : `date`"
	2995	LogFile "-----------------------------"
[2963]	2996	LogFile "$ARCH architecture detected"
	2997	LogFile "mindi called with the following arguments:"
[2978]	2998	echo "$@">> $LOGFILE
[2963]	2999	LogFile "-----------------------------"
[3513]	3000	LogFile "pbdistrocheck results:"
	3001	pbdistrocheck >> $LOGFILE
	3002	LogFile "-----------------------------"
[747]	3003
[1010]	3004	# Log some capital variables
	3005	[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
[3149]	3006	[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
[2963]	3007	LogFile "MONDO_SHARE = $MONDO_SHARE"
	3008	LogFile "MINDI_LIB = $MINDI_LIB"
	3009	LogFile "MINDI_SBIN = $MINDI_SBIN"
	3010	LogFile "MINDI_CONF = $MINDI_CONF"
[3388]	3011	# Purge from potential old run
	3012	if [ _"$MINDI_CACHE" = _"" ]; then
	3013	Die "MINDI_CACHE undefined"
	3014	else
	3015	LogFile "MINDI_CACHE = $MINDI_CACHE"
	3016	fi
	3017
[1885]	3018	if [ -f $MINDI_CONFIG ]; then
[2963]	3019	LogFile "-----------------------------"
	3020	LogFile " Mindi configuration file "
	3021	LogFile "-----------------------------"
[1885]	3022	grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
[2963]	3023	LogFile "-----------------------------"
[1885]	3024	fi
[2995]	3025	LogFile "In Mindi"
	3026	LogFile "--------"
	3027	LogFile "EXTRA_SPACE = $EXTRA_SPACE"
	3028	LogFile "--------"
[1010]	3029
[747]	3030	trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
[1010]	3031
	3032	# Sanity checks
	3033	which which > /dev/null 2> /dev/null \|\| Die "Please install 'which'."
	3034	which strings > /dev/null 2> /dev/null \|\| Die "Please install binutils and libbinutils; you have no 'strings' executable."
	3035	which gawk > /dev/null 2> /dev/null \|\| Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
	3036	which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` \|\| AWK="`which awk 2>/dev/null`"
	3037	if which awk &> /dev/null ; then
	3038	if ! which gawk &> /dev/null ; then
[3565]	3039	LogAll "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
[1010]	3040	fi
	3041	fi
	3042	which mke2fs > /dev/null 2> /dev/null \|\| Die "Please put mke2fs in system path"
[2222]	3043	[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
[1010]	3044
[3005]	3045	[ "`echo $KERVERRUN \| grep -E "2\.4\.[0-6]" \| grep -vE "2\.4\.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
[1010]	3046
	3047	# Update the PATH variable if incomplete
	3048	if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
	3049	PATH=$PATH:/sbin:/usr/sbin
	3050	export PATH
[2963]	3051	LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
	3052	LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
[3255]	3053	LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
[1010]	3054	fi
	3055
[1737]	3056	if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
[3368]	3057	Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
[1010]	3058	fi
	3059
[3149]	3060	### TODO
[747]	3061	### Fix as it's not mandatory on ia64
	3062	if [ "$ARCH" = "ia64" ] ; then
[1010]	3063	if which elilo &> /dev/null ; then
	3064	LILO_EXE=elilo
	3065	else
[2024]	3066	LILO_EXE=`which false 2> /dev/null`
[1010]	3067	fi
[747]	3068	else
	3069	FindIsolinuxBinary
	3070	fi
	3071	trap "Aborted" SIGTERM
	3072	DONE="\r\t\t\t\t\t\t\t\tDone. "
	3073	kernelpath=""
[1010]	3074	MONDO_ROOT=/var/cache/mondo
[747]	3075	mkdir -p $MONDO_ROOT
	3076
	3077	if [ -d "/proc/lvm" ]; then
	3078	# LVM v1
	3079	LVMCMD=""
	3080	LVM="v1"
	3081	elif [ -d "/dev/mapper" ]; then
	3082	# LVM v2
	3083	LVMCMD="lvm"
	3084	LVM="v2"
	3085	else
	3086	LVM="false"
	3087	fi
[3149]	3088
	3089	if [ -e "/proc/cmdline" ]; then
	3090	CMDLINE="/proc/cmdline"
	3091	elif [ -e "/tmp/cmdline" ]; then
	3092	CMDLINE="/tmp/cmdline"
	3093	else
	3094	CMDLINE="/dev/null"
	3095	fi
	3096
[2963]	3097	LogFile "INFO: LVM set to $LVM"
	3098	LogFile "----------"
	3099	LogFile "mount result:"
	3100	LogFile "-------------"
[1230]	3101	mount >> $LOGFILE
[3479]	3102	if [ -e "/etc/raidtab" ]; then
[2963]	3103	LogFile "-------------"
	3104	LogFile "/etc/raidtab content:"
	3105	LogFile "-------------"
[1315]	3106	cat /etc/raidtab >> $LOGFILE
[3077]	3107	else
[3073]	3108	LogFile "No file /etc/raidtab"
[1315]	3109	fi
[3479]	3110	if [ -e "/etc/mdadm.conf" ]; then
[2981]	3111	LogFile "-------------"
	3112	LogFile "/etc/mdadm.conf content:"
	3113	LogFile "-------------"
	3114	cat /etc/mdadm.conf >> $LOGFILE
[3077]	3115	else
[3149]	3116	LogFile "-------------"
[3073]	3117	LogFile "No file /etc/mdadm.conf"
[2981]	3118	fi
[2963]	3119	LogFile "-------------"
[3149]	3120	LogFile "cat $CMDLINE"
[2963]	3121	LogFile "-------------"
[3149]	3122	cat $CMDLINE >> $LOGFILE
[2963]	3123	LogFile "-------------"
	3124	LogFile "cat /proc/swaps:"
	3125	LogFile "-------------"
[2014]	3126	cat /proc/swaps >> $LOGFILE
[2963]	3127	LogFile "-------------"
[3479]	3128	if [ -e "/proc/mdstat" ]; then
[3073]	3129	LogFile "cat /proc/mdstat:"
	3130	LogFile "-------------"
	3131	cat /proc/mdstat >> $LOGFILE
[3077]	3132	else
[3073]	3133	LogFile "No pseudo file /proc/mdstat"
	3134	fi
[2981]	3135	LogFile "-------------"
[2963]	3136	LogFile "cat /proc/partitions:"
	3137	LogFile "-------------"
[2015]	3138	cat /proc/partitions >> $LOGFILE
[2963]	3139	LogFile "-------------"
	3140	LogFile "cat /proc/filesystems:"
	3141	LogFile "-------------"
[2015]	3142	cat /proc/filesystems >> $LOGFILE
[2963]	3143	LogFile "-------------"
	3144	LogFile "lsmod result:"
	3145	LogFile "-------------"
[1021]	3146	lsmod >> $LOGFILE
[2431]	3147	MODULES="`cat /proc/modules \| $AWK '{print $1}'`"
[1531]	3148	if [ -x /usr/sbin/esxcfg-module ]; then
[2963]	3149	LogFile "-------------"
	3150	LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
	3151	LogFile "-------------"
	3152	LogFile "VMWare modules"
	3153	LogFile "-------------"
[1531]	3154	/usr/sbin/esxcfg-module -l >> $LOGFILE
[2431]	3155	MODULES="$MODULES `/usr/sbin/esxcfg-module -l \| $AWK '{print $1}'`"
[1497]	3156	fi
[3149]	3157	LogFile "-------------"
[2963]	3158	LogFile "FORCE_MODS:"
	3159	LogFile "-------------"
[3065]	3160	LogFile "$FORCE_MODS"
[2963]	3161	LogFile "-------------"
	3162	LogFile "DENY_MODS:"
	3163	LogFile "-------------"
[3065]	3164	LogFile "$DENY_MODS"
[2963]	3165	LogFile "-------------"
	3166	LogFile "df result:"
	3167	LogFile "----------"
[3117]	3168	df -aT >> $LOGFILE
[2963]	3169	LogFile "-------------"
[3117]	3170	LogFile "df -i result:"
	3171	LogFile "----------"
	3172	df -i >> $LOGFILE
	3173	LogFile "-------------"
	3174	if [ -r /boot/grub/menu.lst ]; then
	3175	LogFile "-------------"
	3176	LogFile "INFO: /boot/grub/menu.lst content"
	3177	LogFile "-------------"
	3178	cat /boot/grub/menu.lst >> $LOGFILE
[3123]	3179	LogFile "-------------"
[3117]	3180	fi
[3123]	3181	if [ -r /boot/grub/grub.conf ]; then
[3117]	3182	LogFile "-------------"
[3123]	3183	LogFile "INFO: /boot/grub/grub.conf content"
	3184	LogFile "-------------"
	3185	cat /boot/grub/grub.conf >> $LOGFILE
	3186	LogFile "-------------"
	3187	fi
	3188	if [ -r /boot/grub/grub.cfg ]; then
	3189	LogFile "-------------"
	3190	LogFile "INFO: /boot/grub/grub.cfg content"
	3191	LogFile "-------------"
	3192	cat /boot/grub/grub.cfg >> $LOGFILE
	3193	LogFile "-------------"
	3194	fi
	3195	if [ -r /boot/grub/device.map ]; then
	3196	LogFile "-------------"
[3117]	3197	LogFile "INFO: /boot/grub/device.map content"
	3198	LogFile "-------------"
[3123]	3199	cat /boot/grub/device.map >> $LOGFILE
	3200	LogFile "-------------"
[3117]	3201	fi
	3202	if [ -r /etc/lilo.conf ]; then
	3203	LogFile "-------------"
	3204	LogFile "INFO: /etc/lilo.conf content"
	3205	LogFile "-------------"
	3206	cat /etc/lilo.conf >> $LOGFILE
	3207	fi
[3378]	3208	if [ -d /boot/efi ]; then
[3425]	3209	gcf=`find /boot/efi -name 'grub.c*'`
[3384]	3210	if [ _"$gcf" = _"" ]; then
[3425]	3211	LogFile "Found a /boot/efi directory without a grub config file in it"
[3384]	3212	else
	3213	LogFile "-------------"
	3214	LogFile "INFO: $gcf content"
	3215	LogFile "-------------"
	3216	cat $gcf >> $LOGFILE
	3217	LogFile "-------------"
	3218	fi
[3378]	3219	fi
	3220
[3146]	3221	LogFile "Full fdisk info"
	3222	LogFile "---------------"
	3223	$FDISK -l >> $LOGFILE
	3224	LogFile "----------------"
[747]	3225
[1723]	3226	# Compute libata version
[2649]	3227	laver=`modinfo libata 2> /dev/null \| grep -Ei '^Version:' \| cut -d: -f2 \| cut -d. -f1 \| sed 's/ *//g' 2> /dev/null`
[1723]	3228	# If libata v2 is used then remove ide-generic as it will perturbate boot
[1726]	3229	if [ "`echo $MODULES \| grep libata`" ]; then
[1727]	3230	if [ "$laver" = "2" ]; then
[1726]	3231	DENY_MODS="$DENY_MODS ide-generic"
[2963]	3232	LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
	3233	LogFile "-------------"
[1726]	3234	fi
[1723]	3235	fi
	3236
[2963]	3237	# Check for McAfee which disturbs the access to some files (tgz in articular)
[2976]	3238	if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
[2963]	3239	LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
	3240	LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
	3241	LogFile "WARNING: You have two options:"
	3242	LogFile "WARNING: - Exclude all directories with special files (check McAfee System Events Log)"
	3243	LogFile "WARNING: - Disable the scanner during the backup"
	3244	fi
	3245
[1684]	3246	#
	3247	# If we have a USB device we need to store info
	3248	# and remove it from the parameters line
	3249	#
[747]	3250	if [ "$#" -ne "0" ] ; then
[1684]	3251	if [ "$1" = "--usb" ] ; then
	3252	shift
	3253	USBDEVICE=$1
	3254	if [ _"$USBDEVICE" = _"" ]; then
	3255	Die "No USB device specified"
	3256	fi
	3257	shift
	3258	fi
	3259	fi
	3260
	3261	if [ "$#" -ne "0" ] ; then
[747]	3262	if [ "$1" = "--findkernel" ] ; then
[2880]	3263	resk=`TryToFindKernelPath`
[1336]	3264	# Avoids logfile content for mondo
	3265	export MONDO_SHARE=""
[2880]	3266	if [ "$resk" = "" ] ; then
[2838]	3267	if [ $KERNEL_IS_XEN = "yes" ]; then
	3268	echo "$xenkernelpath"
[2963]	3269	LogFile "INFO: xenkernelpath = $xenkernelpath"
[2860]	3270	MindiExit 0
[2838]	3271	else
[2860]	3272	MindiExit -1
[2838]	3273	fi
[747]	3274	else
[2880]	3275	echo "$resk"
[2963]	3276	LogFile "INFO: kernelpath = $resk"
[2860]	3277	MindiExit 0
[747]	3278	fi
[1720]	3279	elif [ "$1" = "--locatedeps" ] ; then
	3280	[ ! "$2" ] && Die "Please specify the binary to look at"
[2438]	3281	LocateDeps $*
[1720]	3282	# Avoids logfile content for mondo
	3283	export MONDO_SHARE=""
	3284	MindiExit $?
[1815]	3285	elif [ "$1" = "--readalllink" ] ; then
	3286	[ ! "$2" ] && Die "Please specify the binary to look at"
	3287	# Avoids logfile content for mondo
	3288	export MONDO_SHARE=""
[3231]	3289	mr-read-all-link $2
[1815]	3290	MindiExit $?
[3518]	3291	elif [ "$1" = "--makebcf" ] ; then
[3520]	3292	[ ! "$2" ] && Die "Please specify the boot loader to check (syslinux, grub, grub2)"
[3518]	3293	MakeBootConfFile $2
[3519]	3294	MindiExit 0
[2731]	3295	elif [ "$1" = "--makemessage" ] ; then
[2948]	3296	MakeMessageFile \| cut -c1-80
[2731]	3297	MindiExit 0
[747]	3298	elif [ "$1" = "--makemountlist" ] ; then
	3299	[ ! "$2" ] && Die "Please specify the output file"
	3300	MakeMountlist $2
[2432]	3301	CheckMountlist $2
[1336]	3302	# Avoids logfile content for mondo
	3303	export MONDO_SHARE=""
[925]	3304	MindiExit $?
	3305	elif [ "$1" = "-V" ] \|\| [ "$1" = "-v" ] \|\| [ "$1" = "--version" ] \|\| [ "$1" = "-version" ] ; then
	3306	echo "Mindi v$MINDI_VERSION"
[1336]	3307	# Avoids logfile content for mondo
	3308	export MONDO_SHARE=""
[925]	3309	MindiExit 0
[747]	3310	elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
[940]	3311	MONDO_TMP=$2
	3312	# Change MINDI_TMP for the one provided by mondo
	3313	# So that it can get back the built files
[2153]	3314	if [ _"$MONDO_TMP" = _"" ]; then
	3315	Die "MONDO_TMP is empty, aborting"
	3316	fi
	3317	if [ _"$MONDO_TMP" = _"/" ]; then
	3318	Die "MONDO_TMP is /, aborting"
	3319	fi
[2092]	3320	mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
[1010]	3321	rmdir $MINDI_TMP
[1486]	3322	export MINDI_TMP=$MONDO_TMP
[953]	3323	mkdir -p $MINDI_TMP
[2238]	3324
[1696]	3325	# This is the scratch dir in mondo - subdir images
[1880]	3326	MINDI_CACHE=$3
[3388]	3327	LogFile "MINDI_CACHE = $MINDI_CACHE"
[2238]	3328
[925]	3329	kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
[2681]	3330	[ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
	3331
[747]	3332	###
	3333	### Sq-Modification...
	3334	### Attempt to locate kernel specific module path
	3335	### if module path is found then use it other wise use uname -r to set it...
	3336	###
[2629]	3337	if [ $KERNEL_IS_XEN = "yes" ]; then
[3149]	3338	LogAll "INFO: xenkernelpath = $xenkernelpath"
[2629]	3339	fi
[2657]	3340	kernelname=`echo $kernelpath \| cut -d'-' -f2- \| sed 's/.[bg]z[2]*$//'`
[3231]	3341	if [ ! -d "/lib/modules/$kernelname" ]; then
[3149]	3342	LogAll "WARNING: Module path for ${kernelpath} not found..."
	3343	LogAll " using running kernel\'s modules."
[2292]	3344	kernelname=$KERVERRUN
[3149]	3345	else
[3426]	3346	LogAll "INFO: Using modules for kernel: ${kernelname}"
[747]	3347	fi
[3149]	3348	LogAll "INFO: kernelname = $kernelname"
	3349	LogAll "INFO: kernelpath = $kernelpath"
[747]	3350	###
	3351	### end of Sq-Modification
	3352	###
[925]	3353	TAPEDEV=$5
	3354	TAPESIZE=$6
	3355	FILES_IN_FILELIST=$7
	3356	USE_LZO=$8
	3357	CDRECOVERY=$9
[747]	3358	if [ "${10}" = "(null)" ] \|\| [ "${10}" = "" ] ; then
	3359	IMAGE_DEVS=""
	3360	else
	3361	IMAGE_DEVS="`echo "${10}" \| tr '\|' ' '`"
	3362	fi
[925]	3363	if [ "${11}" ] ; then
	3364	LILO_OPTIONS=""
[3149]	3365	# LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
[925]	3366	fi
	3367	LAST_FILELIST_NUMBER=${12}
[747]	3368	ESTIMATED_TOTAL_NOOF_SLICES=${13}
[2564]	3369	export MINDI_EXCLUDE_DEVS="${14}"
[747]	3370	USE_COMP="${15}"
	3371	USE_LILO="${16}"
[925]	3372	USE_STAR="${17}"
	3373	INTERNAL_TAPE_BLOCK_SIZE="${18}"
[747]	3374	DIFFERENTIAL="${19}"
[998]	3375	USE_GZIP="${20}"
[3353]	3376	USE_LZMA="${21}"
	3377	NOT_BOOT="${22}"
[3397]	3378	BOOT_TYPE="${23}"
[747]	3379	[ "$USE_COMP" = "" ] && USE_COMP=yes
[998]	3380	[ "$USE_GZIP" = "" ] && USE_GZIP=no
[3353]	3381	[ "$USE_LZMA" = "" ] && USE_LZMA=no
[747]	3382	[ "$NOT_BOOT" = "" ] && NOT_BOOT=no
[3565]	3383	[ "$TAPEDEV" ] && LogAll "INFO: This is a tape-based backup. Fine."
[1696]	3384	# MONDO_ROOT is the real scratchdir
[1880]	3385	MONDO_ROOT=`echo $MINDI_CACHE \| sed 's/\(.\)\/./\1/'`
[938]	3386	if [ _"$MONDO_ROOT" != _"" ]; then
	3387	mkdir -p $MONDO_ROOT
	3388	else
	3389	Die "MONDO_ROOT is undefined"
	3390	fi
[747]	3391	else
[3149]	3392	LogScreen "Syntax: mindi (--custom ....)"
[925]	3393	MindiExit -1
[747]	3394	fi
	3395	fi
[2238]	3396
	3397	if [ _"$MINDI_CACHE" != _"" ]; then
	3398	rm -rf $MINDI_CACHE/* 2> /dev/null
	3399	mkdir -p $MINDI_CACHE
	3400	fi
	3401
[747]	3402	[ "$CDRECOVERY" = "yes" ] \|\| CDRECOVERY=no
	3403
[1684]	3404	if [ _"$MONDO_SHARE" = _"" ]; then
[3565]	3405	LogAll "Mindi Linux mini-distro generator v$MINDI_VERSION"
	3406	LogAll "Latest Mindi is available from http://www.mondorescue.org"
	3407	LogAll "BusyBox sources are available from http://www.busybox.net"
	3408	LogAll "------------------------------------------------------------------------------"
[747]	3409	else
[3426]	3410	LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
[747]	3411	fi
[3231]	3412	if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
[3565]	3413	LogAll "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 \| head -1`"
[1005]	3414	else
[3565]	3415	LogAll "ERROR: Unable to find mindi-busybox, please install it"
[1005]	3416	MindiExit -1
	3417	fi
[747]	3418
	3419	for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
[3111]	3420	modinfo $i 2> /dev/null 1> /dev/null
[3014]	3421	if [ $? -eq 0 ]; then
	3422	modprobe $i 2>&1 > /dev/null
	3423	fi
[747]	3424	done
	3425
[2963]	3426	LogFile "DIFFERENTIAL = $DIFFERENTIAL"
	3427	LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
	3428	LogFile "NOT_BOOT = '$NOT_BOOT'"
[747]	3429	if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
[3565]	3430	LogAll "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
[3278]	3431	MakeMondoConfigFile $MINDI_TMP/$MRCFG
[940]	3432	MakeMountlist $MINDI_TMP/mountlist.txt
[2432]	3433	CheckMountlist $MINDI_TMP/mountlist.txt
[940]	3434	mkdir -p $MINDI_TMP/small-all/tmp
[3565]	3435	cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} $MINDI_TMP/small-all/tmp 2>> $LOGFILE \|\| Die "Cannot copy small all.tar.gz"
	3436	(cd $MINDI_TMP/small-all ; tar -cv ./tmp \| gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log \|\| Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log)
[747]	3437	sleep 2
[3565]	3438	LogAll "Done. Exiting."
[925]	3439	MindiExit 0
[747]	3440	fi
	3441
[1690]	3442	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[3565]	3443	LogAll "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
[1684]	3444	fi
	3445
[747]	3446	if [ "$kernelpath" = "" ] ; then
[1335]	3447	[ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
[3522]	3448	echo -en "\nDo you want to use your own kernel to build the boot disk ([y]/n) ?"
[966]	3449	read ch
	3450	if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
	3451	USE_OWN_KERNEL="yes"
[1809]	3452	else
	3453	USE_OWN_KERNEL="no"
[747]	3454	fi
	3455	if [ "$USE_OWN_KERNEL" = "yes" ]; then
[925]	3456	kernelpath=`TryToFindKernelPath`
	3457	if [ "$kernelpath" = "" ] ; then
	3458	echo -n "Please enter kernel path : "
	3459	read kernelpath
	3460	fi
[747]	3461	fi
	3462	fi
[3231]	3463
[1880]	3464	echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
[3565]	3465	[ "$(($RANDOM%64))" -eq "0" ] && LogAll "INFO: Dude, I've looked inside your computer and it's really dusty..."
[747]	3466
[3248]	3467	mountpoint=$MINDI_TMP/mountpoint.$$
[1983]	3468	PrepareDataDiskImages
	3469
[3522]	3470	MakeBootInitFile $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath \| cut -f1` \|\| Die "Could not create initrd.img"
	3471
[747]	3472	[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
	3473	...Or type 'memtest' to test your PC's RAM thoroughly.\n"
	3474
[1684]	3475	if [ _"$MONDO_SHARE" = _"" ]; then
[1983]	3476	OfferToMakeBootableISO
[1684]	3477	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
[1983]	3478	OfferToMakeBootableUSB
[1684]	3479	fi
[3522]	3480	LogAll "INFO: Mindi Finished"
[747]	3481	elif [ "$TAPEDEV" ] ; then
[2078]	3482	if [ "$ARCH" != "ia64" ] ; then
	3483	# We need to keep the img file as boot file for ia64 platform
	3484	rm -f $MINDI_CACHE/{img,iso}
	3485	else
	3486	rm -f $MINDI_CACHE/*iso
	3487	fi
[1898]	3488	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	3489	OfferToMakeBootableUSB
[1898]	3490	fi
[1983]	3491	OfferToMakeBootableISO
[1880]	3492	if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
	3493	cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
[747]	3494	else
[925]	3495	Die "Cannot find all.tar.gz, to be written to tape"
[747]	3496	fi
[1695]	3497	elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	3498	OfferToMakeBootableUSB
[747]	3499	else
[1983]	3500	OfferToMakeBootableISO
[747]	3501	fi
[3391]	3502
[3396]	3503	if [ -f $MINDI_TMP/$MRCFG ]; then
[3425]	3504	LogFile "INFO: Your $MRCFG file is:"
	3505	LogFile "--------------------------"
	3506	cat $MINDI_TMP/$MRCFG >> $LOGFILE
	3507	LogFile "--------------------------"
[3391]	3508	else
[3421]	3509	if [ _"$MONDO_SHARE" != _"" ] ; then
[3565]	3510	LogAll "ERROR: You don't have a $MRCFG file !"
[3421]	3511	fi
[3391]	3512	fi
[747]	3513	# cleanup
[925]	3514	MindiExit 0

Note: See TracBrowser for help on using the repository browser.

Download in other formats: