[2725] | 1 | /*
|
---|
| 2 | * rtcwake -- enter a system sleep state until specified wakeup time.
|
---|
| 3 | *
|
---|
| 4 | * This version was taken from util-linux and scrubbed down for busybox.
|
---|
| 5 | *
|
---|
| 6 | * Licensed under GPLv2, see file LICENSE in this source tree.
|
---|
| 7 | *
|
---|
| 8 | * This uses cross-platform Linux interfaces to enter a system sleep state,
|
---|
| 9 | * and leave it no later than a specified time. It uses any RTC framework
|
---|
| 10 | * driver that supports standard driver model wakeup flags.
|
---|
| 11 | *
|
---|
| 12 | * This is normally used like the old "apmsleep" utility, to wake from a
|
---|
| 13 | * suspend state like ACPI S1 (standby) or S3 (suspend-to-RAM). Most
|
---|
| 14 | * platforms can implement those without analogues of BIOS, APM, or ACPI.
|
---|
| 15 | *
|
---|
| 16 | * On some systems, this can also be used like "nvram-wakeup", waking
|
---|
| 17 | * from states like ACPI S4 (suspend to disk). Not all systems have
|
---|
| 18 | * persistent media that are appropriate for such suspend modes.
|
---|
| 19 | *
|
---|
| 20 | * The best way to set the system's RTC is so that it holds the current
|
---|
| 21 | * time in UTC. Use the "-l" flag to tell this program that the system
|
---|
| 22 | * RTC uses a local timezone instead (maybe you dual-boot MS-Windows).
|
---|
| 23 | * That flag should not be needed on systems with adjtime support.
|
---|
| 24 | */
|
---|
| 25 |
|
---|
[3232] | 26 | //usage:#define rtcwake_trivial_usage
|
---|
| 27 | //usage: "[-a | -l | -u] [-d DEV] [-m MODE] [-s SEC | -t TIME]"
|
---|
| 28 | //usage:#define rtcwake_full_usage "\n\n"
|
---|
| 29 | //usage: "Enter a system sleep state until specified wakeup time\n"
|
---|
| 30 | //usage: IF_LONG_OPTS(
|
---|
| 31 | //usage: "\n -a,--auto Read clock mode from adjtime"
|
---|
| 32 | //usage: "\n -l,--local Clock is set to local time"
|
---|
| 33 | //usage: "\n -u,--utc Clock is set to UTC time"
|
---|
| 34 | //usage: "\n -d,--device=DEV Specify the RTC device"
|
---|
| 35 | //usage: "\n -m,--mode=MODE Set the sleep state (default: standby)"
|
---|
| 36 | //usage: "\n -s,--seconds=SEC Set the timeout in SEC seconds from now"
|
---|
| 37 | //usage: "\n -t,--time=TIME Set the timeout to TIME seconds from epoch"
|
---|
| 38 | //usage: )
|
---|
| 39 | //usage: IF_NOT_LONG_OPTS(
|
---|
| 40 | //usage: "\n -a Read clock mode from adjtime"
|
---|
| 41 | //usage: "\n -l Clock is set to local time"
|
---|
| 42 | //usage: "\n -u Clock is set to UTC time"
|
---|
| 43 | //usage: "\n -d DEV Specify the RTC device"
|
---|
| 44 | //usage: "\n -m MODE Set the sleep state (default: standby)"
|
---|
| 45 | //usage: "\n -s SEC Set the timeout in SEC seconds from now"
|
---|
| 46 | //usage: "\n -t TIME Set the timeout to TIME seconds from epoch"
|
---|
| 47 | //usage: )
|
---|
| 48 |
|
---|
[2725] | 49 | #include "libbb.h"
|
---|
| 50 | #include "rtc_.h"
|
---|
| 51 |
|
---|
| 52 | #define SYS_RTC_PATH "/sys/class/rtc/%s/device/power/wakeup"
|
---|
| 53 | #define SYS_POWER_PATH "/sys/power/state"
|
---|
| 54 | #define DEFAULT_MODE "standby"
|
---|
| 55 |
|
---|
| 56 | static NOINLINE bool may_wakeup(const char *rtcname)
|
---|
| 57 | {
|
---|
| 58 | ssize_t ret;
|
---|
| 59 | char buf[128];
|
---|
| 60 |
|
---|
| 61 | /* strip "/dev/" from the rtcname here */
|
---|
| 62 | rtcname = skip_dev_pfx(rtcname);
|
---|
| 63 |
|
---|
| 64 | snprintf(buf, sizeof(buf), SYS_RTC_PATH, rtcname);
|
---|
| 65 | ret = open_read_close(buf, buf, sizeof(buf));
|
---|
| 66 | if (ret < 0)
|
---|
| 67 | return false;
|
---|
| 68 |
|
---|
| 69 | /* wakeup events could be disabled or not supported */
|
---|
| 70 | return strncmp(buf, "enabled\n", 8) == 0;
|
---|
| 71 | }
|
---|
| 72 |
|
---|
| 73 | static NOINLINE void setup_alarm(int fd, time_t *wakeup, time_t rtc_time)
|
---|
| 74 | {
|
---|
| 75 | struct tm *ptm;
|
---|
| 76 | struct linux_rtc_wkalrm wake;
|
---|
| 77 |
|
---|
| 78 | /* The wakeup time is in POSIX time (more or less UTC).
|
---|
| 79 | * Ideally RTCs use that same time; but PCs can't do that
|
---|
| 80 | * if they need to boot MS-Windows. Messy...
|
---|
| 81 | *
|
---|
| 82 | * When running in utc mode this process's timezone is UTC,
|
---|
| 83 | * so we'll pass a UTC date to the RTC.
|
---|
| 84 | *
|
---|
| 85 | * Else mode is local so the time given to the RTC
|
---|
| 86 | * will instead use the local time zone.
|
---|
| 87 | */
|
---|
| 88 | ptm = localtime(wakeup);
|
---|
| 89 |
|
---|
| 90 | wake.time.tm_sec = ptm->tm_sec;
|
---|
| 91 | wake.time.tm_min = ptm->tm_min;
|
---|
| 92 | wake.time.tm_hour = ptm->tm_hour;
|
---|
| 93 | wake.time.tm_mday = ptm->tm_mday;
|
---|
| 94 | wake.time.tm_mon = ptm->tm_mon;
|
---|
| 95 | wake.time.tm_year = ptm->tm_year;
|
---|
| 96 | /* wday, yday, and isdst fields are unused by Linux */
|
---|
| 97 | wake.time.tm_wday = -1;
|
---|
| 98 | wake.time.tm_yday = -1;
|
---|
| 99 | wake.time.tm_isdst = -1;
|
---|
| 100 |
|
---|
| 101 | /* many rtc alarms only support up to 24 hours from 'now',
|
---|
| 102 | * so use the "more than 24 hours" request only if we must
|
---|
| 103 | */
|
---|
| 104 | if ((rtc_time + (24 * 60 * 60)) > *wakeup) {
|
---|
| 105 | xioctl(fd, RTC_ALM_SET, &wake.time);
|
---|
| 106 | xioctl(fd, RTC_AIE_ON, 0);
|
---|
| 107 | } else {
|
---|
| 108 | /* avoid an extra AIE_ON call */
|
---|
| 109 | wake.enabled = 1;
|
---|
| 110 | xioctl(fd, RTC_WKALM_SET, &wake);
|
---|
| 111 | }
|
---|
| 112 | }
|
---|
| 113 |
|
---|
| 114 | #define RTCWAKE_OPT_AUTO 0x01
|
---|
| 115 | #define RTCWAKE_OPT_LOCAL 0x02
|
---|
| 116 | #define RTCWAKE_OPT_UTC 0x04
|
---|
| 117 | #define RTCWAKE_OPT_DEVICE 0x08
|
---|
| 118 | #define RTCWAKE_OPT_SUSPEND_MODE 0x10
|
---|
| 119 | #define RTCWAKE_OPT_SECONDS 0x20
|
---|
| 120 | #define RTCWAKE_OPT_TIME 0x40
|
---|
| 121 |
|
---|
| 122 | int rtcwake_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
|
---|
| 123 | int rtcwake_main(int argc UNUSED_PARAM, char **argv)
|
---|
| 124 | {
|
---|
| 125 | time_t rtc_time;
|
---|
| 126 |
|
---|
| 127 | unsigned opt;
|
---|
| 128 | const char *rtcname = NULL;
|
---|
| 129 | const char *suspend;
|
---|
| 130 | const char *opt_seconds;
|
---|
| 131 | const char *opt_time;
|
---|
| 132 |
|
---|
| 133 | time_t sys_time;
|
---|
| 134 | time_t alarm_time = 0;
|
---|
| 135 | unsigned seconds = 0;
|
---|
| 136 | int utc = -1;
|
---|
| 137 | int fd;
|
---|
| 138 |
|
---|
| 139 | #if ENABLE_LONG_OPTS
|
---|
| 140 | static const char rtcwake_longopts[] ALIGN1 =
|
---|
| 141 | "auto\0" No_argument "a"
|
---|
| 142 | "local\0" No_argument "l"
|
---|
| 143 | "utc\0" No_argument "u"
|
---|
| 144 | "device\0" Required_argument "d"
|
---|
| 145 | "mode\0" Required_argument "m"
|
---|
| 146 | "seconds\0" Required_argument "s"
|
---|
| 147 | "time\0" Required_argument "t"
|
---|
| 148 | ;
|
---|
| 149 | applet_long_options = rtcwake_longopts;
|
---|
| 150 | #endif
|
---|
| 151 | opt = getopt32(argv, "alud:m:s:t:", &rtcname, &suspend, &opt_seconds, &opt_time);
|
---|
| 152 |
|
---|
| 153 | /* this is the default
|
---|
| 154 | if (opt & RTCWAKE_OPT_AUTO)
|
---|
| 155 | utc = -1;
|
---|
| 156 | */
|
---|
| 157 | if (opt & (RTCWAKE_OPT_UTC | RTCWAKE_OPT_LOCAL))
|
---|
| 158 | utc = opt & RTCWAKE_OPT_UTC;
|
---|
| 159 | if (!(opt & RTCWAKE_OPT_SUSPEND_MODE))
|
---|
| 160 | suspend = DEFAULT_MODE;
|
---|
| 161 | if (opt & RTCWAKE_OPT_SECONDS)
|
---|
| 162 | /* alarm time, seconds-to-sleep (relative) */
|
---|
| 163 | seconds = xatoi(opt_seconds);
|
---|
| 164 | if (opt & RTCWAKE_OPT_TIME)
|
---|
| 165 | /* alarm time, time_t (absolute, seconds since 1/1 1970 UTC) */
|
---|
| 166 | alarm_time = xatol(opt_time);
|
---|
| 167 |
|
---|
| 168 | if (!alarm_time && !seconds)
|
---|
| 169 | bb_error_msg_and_die("must provide wake time");
|
---|
| 170 |
|
---|
| 171 | if (utc == -1)
|
---|
| 172 | utc = rtc_adjtime_is_utc();
|
---|
| 173 |
|
---|
| 174 | /* the rtcname is relative to /dev */
|
---|
| 175 | xchdir("/dev");
|
---|
| 176 |
|
---|
| 177 | /* this RTC must exist and (if we'll sleep) be wakeup-enabled */
|
---|
| 178 | fd = rtc_xopen(&rtcname, O_RDONLY);
|
---|
| 179 |
|
---|
| 180 | if (strcmp(suspend, "on") && !may_wakeup(rtcname))
|
---|
| 181 | bb_error_msg_and_die("%s not enabled for wakeup events", rtcname);
|
---|
| 182 |
|
---|
| 183 | /* relative or absolute alarm time, normalized to time_t */
|
---|
| 184 | sys_time = time(NULL);
|
---|
| 185 | {
|
---|
| 186 | struct tm tm_time;
|
---|
| 187 | rtc_read_tm(&tm_time, fd);
|
---|
| 188 | rtc_time = rtc_tm2time(&tm_time, utc);
|
---|
| 189 | }
|
---|
| 190 |
|
---|
| 191 |
|
---|
| 192 | if (alarm_time) {
|
---|
| 193 | if (alarm_time < sys_time)
|
---|
| 194 | bb_error_msg_and_die("time doesn't go backward to %s", ctime(&alarm_time));
|
---|
| 195 | alarm_time += sys_time - rtc_time;
|
---|
| 196 | } else
|
---|
| 197 | alarm_time = rtc_time + seconds + 1;
|
---|
| 198 | setup_alarm(fd, &alarm_time, rtc_time);
|
---|
| 199 |
|
---|
| 200 | sync();
|
---|
| 201 | printf("wakeup from \"%s\" at %s", suspend, ctime(&alarm_time));
|
---|
| 202 | fflush_all();
|
---|
| 203 | usleep(10 * 1000);
|
---|
| 204 |
|
---|
| 205 | if (strcmp(suspend, "on"))
|
---|
| 206 | xopen_xwrite_close(SYS_POWER_PATH, suspend);
|
---|
| 207 | else {
|
---|
| 208 | /* "fake" suspend ... we'll do the delay ourselves */
|
---|
| 209 | unsigned long data;
|
---|
| 210 |
|
---|
| 211 | do {
|
---|
| 212 | ssize_t ret = safe_read(fd, &data, sizeof(data));
|
---|
| 213 | if (ret < 0) {
|
---|
| 214 | bb_perror_msg("rtc read");
|
---|
| 215 | break;
|
---|
| 216 | }
|
---|
| 217 | } while (!(data & RTC_AF));
|
---|
| 218 | }
|
---|
| 219 |
|
---|
| 220 | xioctl(fd, RTC_AIE_OFF, 0);
|
---|
| 221 |
|
---|
| 222 | if (ENABLE_FEATURE_CLEAN_UP)
|
---|
| 223 | close(fd);
|
---|
| 224 |
|
---|
| 225 | return EXIT_SUCCESS;
|
---|
| 226 | }
|
---|