source: MondoRescue/branches/3.0/mindi/mindi @ 3027

Last change on this file since 3027 was 3027, checked in by Bruno Cornec, 8 years ago
  • Check whether kpartx exists before calling it (full path name now)
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 119.2 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3027 2012-07-23 18:39:40Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23
24MINDI_REV=PBREV
25MINDI_VER=PBVER
26
27MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
28MINDI_PREFIX=XXX
29MINDI_CONF=YYY
30MINDI_SBIN=${MINDI_PREFIX}/sbin
31MINDI_LIB=LLL
32
33# Temporary directory for mindi
34TMPDIR=/tmp
35
36EXTRA_SPACE=92160       # increase if you run out of ramdisk space
37BOOT_SIZE=40960         # size of the boot disk
38
39PROMPT_MAKE_CD_IMAGE="yes"
40    # Ask if you want to make a CD Image to be written?
41    # if this is set to 'no', then the image will be created automatically
42
43PROMPT_MAKE_USB_IMAGE="yes"
44    # Ask if you want to make a USB Image to be written?
45    # if this is set to 'no', then the image will be created automatically
46
47USE_OWN_KERNEL="yes"
48    # If set to "no", you will be prompted for whether or not
49    # you want to use your own kernel, or the supplied default.
50    # If "yes" mindi will automatically use your own kernel.
51
52KERNEL_IS_XEN="no"
53    # If set to "no", the kernel is not a Xen kernel
54    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
55xenkernelpath=""
56 
57MY_FSTAB=/etc/fstab
58TAPE_MODS="ht st osst ide-tape ide_tape"
59SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi iscsi_tcp libiscsi scsi_transport_iscsi libiscsi_tcp isp megaraid megaraid_mm megaraid_mbox megaraid_sas mega_sr mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qla2xxx_conf qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod scsi_transport_sas scsi_transport_spi scsi_transport_fc sd_mod crc_t10dif crc-t10dif seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule scsi_dh scsi_tgt emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib scsi_dump_register arcmsr"
60
61# ide-probe-mod
62IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs ide-core ide_core ide-gd_mod ide_gd_mod edd paride ata_generic ide_pci_generic ata_piix libata dock via82cxxx generic nvidia ahci libahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw blkbk virtio virtio_ring virtio_pci virtio_blk virtio_balloon"
63PCMCIA_MODS="pcmcia_core ds yenta_socket"
64USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_common usb-common usb_storage input hid uhci_hcd ehci_hcd uhci-hcd ehci-hcd ohci-hcd ohci_hcd xhci usbkbd usbhid keybdev mousedev libusual scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
65NET_MODS="auth_rpcgss sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 cnic be2net 8021q bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 libphy pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse libcrc32c netbk xenblktap r8169 virtio_net via_rhine"
66CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660 vfat fat"
67# Those modules will only go on the backup media, not the boot media.
68EXTRA_MODS="$CDROM_MODS loop md-mod linear raid0 raid1 xor raid10 raid5 raid456 raid6_pq async_pq xor async_tx async_memcpy async_xor lvm-mod dm-mod dm_mod dm-snapshot dm_snapshot dm-zero dm_zero dm-mirror dm_mirror dm-multipath dm-round-robin dm-emc dm-hp-sw dm-rdac dm-region-hash dm-snapshot dm-log multipath jfs xfs btrfs zlib_deflate libcrc32c xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache ext4 jbd2 crc16 ocfs2 ocfs2_dlm ocfs2_nodemanager configfs"
69# Replace with that line for HP OCMP e.g.
70#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
71DENY_MODS="kqemu"
72# Force some modules to be included
73FORCE_MODS=""
74
75# Find MBR in case of bootable USB device to build
76MBRFILE=/usr/lib/syslinux/mbr.bin
77[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
78[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
79[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
80[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
81
82LOGFILE=/var/log/mindi.log
83MINDI_CACHE=/var/cache/mindi
84BOOT_MEDIA_MESSAGE="\
85To format and restore all files automatically, type 'nuke' <enter>.\n\
86To restore some/all files interactively, type 'interactive' <enter>.\n\
87To compare the archives with your filesystem, type 'compare' <enter>.\n\
88To boot to a command-line prompt (expert mode), type 'expert' <enter>.\n\
89You may add one or more of the following parameters as well:-\n\n\
90        donteject - mondorestore will not eject the CD; this is useful if, for\n\
91                    instance, your PC's case has a concealed CD-ROM drive\n\
92        noresize  - your mountlist will not be adjusted to use your unallocated\n\
93                    hard disk space\n\
94        textonly  - do not call any Newt library routines; this is unattractive\n\
95                    but valuable if you find your Newt library has bugs in it\n\n\
96e.g. Type 'nuke donteject textonly' if you have an unstable Newt library and \n\
97a PC whose CD-ROM drive tray would be damaged if it unexpectedly ejected.\n\
98"
99FDISK=$MINDI_SBIN/parted2fdisk
100
101# Using a config file allow to overwrite some values
102MINDI_CONFIG="$MINDI_CONF/mindi.conf"
103if [ -f $MINDI_CONFIG ]; then
104    . $MINDI_CONFIG
105fi
106DEPLIST_FILE="$MINDI_CONF/deplist.txt"
107DEPLIST_DIR="$MINDI_CONF/deplist.d"
108
109ISO_CMD="/usr/bin/mkisofs"
110ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
111
112# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
113# However, they use exactly the same command line parameters, so just
114# use genisoimage if it's available.
115if [ ! -x $ISO_CMD ]; then
116    ISO_CMD=/usr/bin/genisoimage
117fi
118
119
120# Function to log on screen only
121LogScreen() {
122    if [ -e /dev/stderr ] ; then
123        echo -e "$1" >> /dev/stderr
124    elif [ -e /usr/bin/logger ] ; then
125        /usr/bin/logger -s $1
126    fi
127}
128
129# Function to log in log file only
130LogFile() {
131
132    echo -e "$1" >> $LOGFILE
133    if [ _"$2" != _"" ]; then
134        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
135    fi
136    rm -f "$2"
137}
138
139# Function to log in both screen and logfile
140LogAll() {
141    LogScreen "$1"
142    LogFile "$1" "$2"
143}
144
145# Preserved for compatibility
146LogIt() {
147    LogAll "$1" "$2"
148}
149
150# Last function called before exiting
151# Parameter is exit code value
152# Should be declared here as used immediately below potentialy
153MindiExit() {
154    echo "Mindi $MINDI_VERSION is exiting" >> $LOGFILE
155    echo "End date : `date`" >> $LOGFILE
156    if [ _"$MONDO_SHARE" != _"" ] ; then
157        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
158        if [ -f $LOGFILE ]; then
159            cat $LOGFILE >> /var/log/mondoarchive.log
160        else
161            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
162        fi
163        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
164    fi
165
166    cd /
167    sync&
168
169    # Clean temporary files only when standalone mindi
170    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
171        rm -Rf $MINDI_TMP
172    fi
173    exit $1
174}
175
176Die() {
177    local i
178    if [ "$1" = "" ] ; then
179        LogIt "FATAL ERROR"
180    else
181        LogIt "FATAL ERROR. $1"
182    fi
183    if [ _"$2" != _"" ]; then
184        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
185    fi
186    rm -f "$2"
187
188    LogIt "Please e-mail a copy of $LOGFILE to the mailing list."
189    LogIt "See http://www.mondorescue.org for more information."
190    LogIt "WE CANNOT HELP unless you enclose that file.\n"
191    MindiExit -1
192}
193
194# Now we can create what we need
195MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
196if [ $? -ne 0 ]; then
197    df $TMPDIR
198    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
199fi
200if [ _"$MINDI_TMP" = _"" ]; then
201    Die "MINDI_TMP is empty, aborting"
202fi
203if [ _"$MINDI_TMP" = _"/" ]; then
204    Die "MINDI_TMP is /, aborting"
205fi
206export MINDI_TMP
207
208# ----------------------------------------------------------------------------
209
210
211AbortHere() {
212    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
213    Die "Program is terminating in response to signal received from OS/user"
214}
215
216
217Aborted() {
218    trap SIGHUP SIGTERM SIGTRAP SIGINT
219    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
220    [ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
221    Die "User abort."
222}
223
224
225AddFileToCfgIfExists() {
226    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
227}
228
229
230AddKeyboardMappingFile() {
231    local mappath r included_list included_item i res ii sss
232    mappath=$1
233    KBDEPTH=$(($KBDEPTH+1))
234    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
235    if [ -e "$bigdir/$mappath" ] ; then
236        LogFile "INFO: $mappath already added" >> $LOGFILE
237        return
238    elif [ -d "$bigdir/$mappath" ] ; then
239        echo "Cannot add $mappath: it's a directory. Sorry."
240        return
241    fi
242    LogFile "INFO: Added kbd map $mappath" >> $LOGFILE
243    if [ ! -e "$mappath" ] ; then
244            mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
245        if [ ! -e "$mappath" ] ; then
246            LogIt "WARNING: Cannot add $mappath: kbd map file not found"
247            return
248        fi
249    else
250        echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
251    fi
252
253    mkdir -p $bigdir/etc
254    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogIt "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
255    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
256        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
257    else
258        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
259    fi
260    for included_item in $included_list ; do
261        if [ ! -e "$included_item" ] ; then
262                sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
263            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
264            for ii in $sss ; do
265                [ -e "$ii" ] && AddKeyboardMappingFile $ii
266            done
267        else
268            AddKeyboardMappingFile $included_item
269        fi
270    done
271}
272
273
274CopyDependenciesToDirectory() {
275    local outdir incoming fname counter d found
276    outdir=$1
277    mkdir -p $outdir
278    incoming=`ReadLine`
279    counter=0
280    while [ "$incoming" != "" ] ; do
281        # Non absolute file names should not arrive till here => skipped
282        if [ `echo "$incoming" | cut -c1` != '/' ]; then
283            LogIt "WARNING: Unable to handle $incoming"
284            incoming=`ReadLine`
285            continue
286        fi
287        # no parent directory of incoming should be a link, copy is not possible in that case
288        d=`dirname "$incoming"`
289        found="false"
290        while [ $d != "/" -a $found = "false" ]; do
291            [ -h "$d" ] && found="true"
292            d=`dirname "$d"`
293        done
294        if [ -d "$incoming" ] && [ ! -h "$incoming" ]; then
295            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir
296        elif [ -e "$incoming" ] && [ $found = "false" ]; then
297            tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
298
299            # Only uncompress modules if not using udevd
300            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
301                gunzip -f $outdir/$incoming || LogIt "WARNING: Cannot gunzip $outdir/$incoming"
302            fi
303            [ -x "$outdir" ] && StripExecutable $outdir "-$filename-"
304            counter=$(($counter+1))
305            if [ "$counter" -ge "5" ] ; then
306                counter=0
307                echo -en "."
308            fi
309        fi
310        incoming=`ReadLine`
311    done
312}
313
314
315CountItemsIn() {
316    local r
317    r=0
318    for q in $1 ; do
319        r=$(($r+1))
320    done
321    echo $r
322}
323
324
325DropOptimizedLibraries() {
326    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
327    filelist=$1
328    outdir=$2
329
330    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
331    if [ "$list_of_optimized_libraries" = "" ] ; then
332        return 0
333    fi
334    echo -en "Dropping i686-optimized libraries if appropriate"
335    for optimized_lib_name in $list_of_optimized_libraries ; do
336        echo -en "."
337        reason=""
338        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
339        echo "$vanilla_lib_name" >> $filelist
340        LogFile "INFO: Adding $vanilla_lib_name to filelist"
341        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
342        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
343
344        # This may return multiple files
345        for resolved in `ReadAllLink $vanilla_lib_name`; do
346            LogFile "INFO: Adding as deps $resolved to filelist"
347            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
348            mkdir -p $outdir$resolved> /dev/null 2> /dev/null
349            rmdir $outdir$resolved > /dev/null 2> /dev/null
350            ln -sf $vanilla_resolved_name $outdir$resolved
351            LogFile "INFO: Excluding deps $resolved"
352            grep -Fvx "$resolved" "$filelist" > $filelist.tmp
353            LogFile "INFO: Replacing it with $vanilla_resolved_name"
354            echo "$vanilla_resolved_name" >> $filelist.tmp
355            mv -f $filelist.tmp $filelist
356        done
357    done
358    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
359    mv -f $filelist.tmp $filelist
360    echo -e "$DONE"
361}
362
363
364FindAndAddUserKeyboardMappingFile() {
365    local r res mapfile mappath included_item included_list keyfile mp locale
366    LogIt "INFO: Analyzing your keyboard's configuration."
367    KEYDIR=/lib/kbd
368    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
369    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
370    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
371    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
372    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
373    if [ ! -e "$KEYDIR" ] ; then
374        LogIt "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
375        return 0
376    fi
377    if [ -e "/etc/sysconfig/keyboard" ] ; then
378        LogFile "INFO: Red Hat-style config detected."
379        keyfile=/etc/sysconfig/keyboard
380    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
381        LogFile "INFO: Slackware-style config detected."
382        keyfile=/etc/rc.d/rc.keymap
383    elif [ -e "/etc/rc.config" ] ; then
384        LogFile "INFO: Debian-style config detected."
385        keyfile=/etc/rc.config
386    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
387        LogFile "INFO: Debian-style config detected."
388        echo -en "INFO: Adding the following keyboard mapping tables: "
389        mkdir -p $bigdir/tmp
390        echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
391        KBDEPTH=0
392        mkdir -p $bigdir/etc/console
393        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
394        echo ""
395        echo -e "$DONE"
396        return 0
397    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
398        LogFile "INFO: Ubuntu-style config detected."
399        echo -en "INFO: Adding the following keyboard mapping tables: "
400        mkdir -p $bigdir/tmp
401        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
402            kbdfile="/etc/console-setup/boottime.kmap.gz"
403        else
404            kbdfile="/etc/console-setup/cached.kmap.gz"
405        fi
406        echo $kbdfile > $bigdir/tmp/KEYMAP-LIVES-HERE
407        KBDEPTH=0
408        mkdir -p $bigdir/etc/console-setup
409        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
410        echo ""
411        echo -e "$DONE"
412        return 0
413    elif [ -e "/etc/rc.conf" ] ; then
414        LogFile "INFO: ArchLinux config detected."
415        keyfile=/etc/rc.conf
416    elif [ -e "/etc/conf.d/keymaps" ] ; then
417        LogFile "INFO: Gentoo-style config detected."
418        keyfile=/etc/conf.d/keymaps
419    else
420        echo -en "Searching for rc.config ..."
421        keyfile=`find /etc -name rc.config | head -n1`
422        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
423            LogIt "WARNING: Unknown config detected. Default keyboard map will be used."
424            return
425        else
426            LogFile "INFO: Found $keyfile"
427        fi
428    fi
429    if [ ! -e "$KEYDIR/keymaps" ] ; then
430        LogIt "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
431        return
432    fi
433    LogFile "INFO: keyfile=$keyfile"
434    # For SLES we need to remove the .map.gz extension Cf #614
435    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
436    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
437    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo & ArchLinux
438    LogFile "INFO: locale=$locale"
439    #
440    # Process the keymaps dir once for all
441    # AddKeyboardMappingFile will use it recursively
442    #
443    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
444    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
445    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
446    # If we have multiple keymaps then log it !!
447    echo "$mp" | grep -q " "
448    if [ $? -eq 0 ]; then
449        LogAll "WARNING: Multiple keymaps found: $mp"
450        LogFile "INFO: The following one will be used"
451    fi
452    for i in $mp ; do
453        mappath=$i
454        [ -e "$i" ] && [ ! -d "$i" ] && break
455    done
456    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
457        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
458    fi
459    LogFile "INFO: mappath = $mappath"
460    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
461        LogIt "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
462        return
463    fi
464    echo -en "INFO: Adding the following keyboard mapping tables: "
465    mkdir -p $bigdir/tmp
466    echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
467    KBDEPTH=0
468    AddKeyboardMappingFile $mappath
469    echo ""
470    echo -e "$DONE"
471    rm -f $MINDI_TMP/keymaps.find
472    return 0
473}
474
475
476FindMboot32Binary() {
477    MBOOTC32=/usr/lib/syslinux/mboot.c32
478    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/mboot.c32
479    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
480    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
481    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
482    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
483    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
484    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
485    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
486}
487
488FindIsolinuxBinary() {
489    ISOLINUX=/usr/lib/isolinux.bin
490    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
491    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
492    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
493    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
494    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
495    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
496    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
497    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
498}
499
500
501FindSpecificModuleInPath() {
502    local modpaths pwd line
503    pwd=`pwd`
504    if [ "$YOUR_KERNEL_SUCKS" ] ; then
505        cd "$MINDI_TMP"
506    else
507        cd /
508    fi
509    if [ ! -e "$1" ] ; then
510        LogIt "WARNING: cannot search specific path '$1'"
511        return 1
512    fi
513    # Find all files and links (required for some VMWare VMs)
514    modpaths=`find $1 -name $2.*o -o -name $2.o.gz -o -name $2.ko.gz -o -name $2.ko.xz -o -name $2 -type f -o -type l`
515    echo "$modpaths"
516    cd "$pwd"
517}
518
519
520GenerateGiantDependencyList() {
521    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
522
523    echo -en "Analyzing dependency requirements"
524    outfile=$1
525    tempfile=$MINDI_TMP/$$.txt
526    incoming=`ReadLine`
527
528    > $tempfile
529    progress=0
530    res=0
531    noof_lines=$2
532    while [ "$incoming" != "" ] ; do
533        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
534            incoming=`ReadLine`
535            continue
536        fi
537        if [ "$incoming" = "LVMFILES:" ] ; then
538            break
539        fi
540        filelist=`GenerateListForFile "$incoming"`
541        r=$?
542        [ "$r" -ne "0" ] && LogIt "WARNING: $incoming not found"
543        res=$(($res+$r))
544#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
545        for fname in $filelist ; do
546            [ "$fname" != "" ] && echo "$fname" >> $tempfile
547        done
548        progress=$(($progress+1))
549        echo -en "\r\t\t\t\t\t\t\t\t"
550        i=$(($progress*100))
551        i=$(($i/$noof_lines))
552        echo -en "$i"
553        echo -en "%"
554        modres=$(($progress%4))
555        [ "$modres" -eq "0" ] && echo -en "\t/"
556        [ "$modres" -eq "1" ] && echo -en "\t-"
557        [ "$modres" -eq "2" ] && echo -en "\t\\"
558        [ "$modres" -eq "3" ] && echo -en "\t|"
559        incoming=`ReadLine`
560    done
561    if  [ "$incoming" = "LVMFILES:" ] ; then
562        incoming=`ReadLine`
563        lvmversion=""
564        while [ "$incoming" != "" ] ; do
565            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
566                incoming=`ReadLine`
567                continue
568            fi
569            filelist=`GenerateListForFile "$incoming"`
570            for tool in $filelist ; do
571                lvmresolved=`readlink -f $tool`
572                if [ "$tool" = "$lvmresolved" ]; then
573                    echo "$tool" >> $tempfile
574                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
575                    if [ "$lvmversion" = "" ] ; then
576                        lvmversion=`$lvmresolved`
577                        echo "$lvmresolved" >> $tempfile
578                    fi
579                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
580                    if [ "$lvmversion" = "200" ]; then
581                        # pvdata and lvmcreate_initrd don't exist in LVM2
582                        case "$toolstripped" in
583                        "pvdata")
584                            continue
585                            ;;
586                        "lvmcreate_initrd")
587                            continue
588                            ;;
589                        esac
590                    fi
591                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
592                    if [ -e "$toolpath" ] ; then
593                        echo "$toolpath" >> $tempfile
594                        echo "$tool" >> $tempfile
595                    else
596                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
597                    fi
598                    if [ -e "$toolpath" ] ; then
599                        echo "$toolpath" >> $tempfile
600                        echo "$tool" >> $tempfile
601                    else
602                        echo "Where are your LVM-Tools? Couldn't find $tool"
603                    fi
604                else
605                    echo "$tool" >> $tempfile
606                fi
607            done
608            progress=$(($progress+1))
609            echo -en "\r\t\t\t\t\t\t\t\t"
610            i=$(($progress*100))
611            i=$(($i/$noof_lines))
612            echo -en "$i"
613            echo -en "%"
614            modres=$(($progress%4))
615            [ "$modres" -eq "0" ] && echo -en "\t/"
616            [ "$modres" -eq "1" ] && echo -en "\t-"
617            [ "$modres" -eq "2" ] && echo -en "\t\\"
618            [ "$modres" -eq "3" ] && echo -en "\t|"
619            incoming=`ReadLine`
620        done
621    fi
622    echo -en "$DONE\nMaking complete dependency list"
623
624    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
625    mv -f $tempfile.new $tempfile
626    > $outfile.pre
627    progress=0
628    noof_lines=`cat $tempfile | wc -l`
629    LogFile "---------------------------------"
630    LogFile "List of dependencies:             "
631    LogFile "---------------------------------"
632    for fname in `cat $tempfile` ; do
633        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
634        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
635        progress=$(($progress+1))
636        echo -en "\r\t\t\t\t\t\t\t\t"
637        i=$(($progress*100))
638        i=$(($i/$noof_lines))
639        echo -en "$i"
640        echo -en "%"
641        modres=$(($progress%4))
642        [ "$modres" -eq "0" ] && echo -en "\t/"
643        [ "$modres" -eq "1" ] && echo -en "\t-"
644        [ "$modres" -eq "2" ] && echo -en "\t\\"
645        [ "$modres" -eq "3" ] && echo -en "\t|"
646    done
647    if [ _"$MONDO_SHARE" != _"" ]; then
648        mkdir -p $bigdir/tmp
649        mkdir -p $bigdir/sbin
650        mkdir -p $bigdir/bin
651        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
652            LogIt "\nINFO: Incorporating post-nuke tarball"
653            old_pwd=`pwd`
654            cd "$bigdir"
655            tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogIt "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
656            cd "$old_pwd"
657        fi
658        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
659            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
660        else
661            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
662            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
663            LogIt "       If Mindi was called by Mondo then send me a bug report."
664            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
665            LogIt "       Finally, run Mindi again."
666            Die "Odd."
667        fi
668        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
669        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
670            LogIt "\nINFO: Incorporating Network-related settings"
671            for r in NETFS-* ISO-PREFIX ; do
672                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
673                LogFile "INFO: Copying $r to ramdisk"
674            done
675        fi
676    fi
677    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
678    rm -f $tempfile $outfile.pre
679    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
680    return $res
681}
682
683
684GenerateListForFile() {
685    local files_found loc fname incoming i res
686    incoming="$1"
687    files_found=""
688    res=0
689
690    for fname in $incoming ; do
691        files_found="$files_found `LocateFile $fname`"
692    done
693
694    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
695}
696
697
698# Returns all disk devices which are part of a raid array
699GetAllRaidMembers() {
700    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
701}
702
703
704GetFileSizeList() {
705    local i
706    for i in `find $1 -type d -o -print` ; do
707        du -sk $i
708    done
709}
710
711
712GetHomeDir() {
713    local res loc
714    loc=`which $1 2>/dev/null`
715    res=`file $loc | $AWK '{print $NF;}'`
716    dirname $res
717}
718
719
720# Check kernel filesystem capabilites for accessing initrd image
721# Could be ext2 FS (old mode) or initramfs (new mode)
722#
723# Interface definition:
724# param #1: absolute path to kernel image
725GetInitrdFilesystemToUse() {
726
727    # interface test: make sure we have one parameter
728    if [ $# -ne 1 ]; then
729        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
730    fi
731
732    # interface parameters
733    local lvKernelImage=$1
734
735    # local constants (filesystem magic strings)
736    local lcMagicCramfs="<3>cramfs: wrong magic"
737    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
738    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
739    local lcMagicInitfs="<6>checking if image is initramfs...|<6>Unpacking initramfs...|<6>Trying to unpack rootfs image as
740initramfs"
741
742    # local variables
743    local lvOffset
744    local lvScanRes
745    local lvUseFilesystem
746
747    # say where we are.
748    LogFile "INFO:   GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
749
750    # verify that file exists
751    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
752
753    # Kernel may be gzip compressed
754    file $lvKernelImage 2>&1 | grep -q gzip
755    if [ $? -eq 0 ]; then
756        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs"`
757
758        # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
759        if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
760            lvUseFilesystem="ext2fs"
761        elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
762            lvUseFilesystem="ext3fs"
763        elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
764            lvUseFilesystem="initramfs"
765        elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
766            lvUseFilesystem="cramfs"
767        else
768            lvUseFilesystem="UNSUPPORTED"
769        fi
770
771    else
772        # In that case, we are after 2.6.30 and use the supported initramfs
773        lvUseFilesystem="initramfs"
774    fi
775    # say what we are using
776    LogFile "INFO:   GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
777
778    # return file system to use
779    echo "$lvUseFilesystem"
780
781}
782
783# Searches parent raid device of given disk device
784# $1: disk device (i.e. /dev/hda1)
785GetParentRaidDev() {
786    if [ ! -f /etc/raidtab ]; then 
787        return
788    fi
789    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {dev=\$2} /^[[:space:]]*device/ {if(\$2==\"$1\") {print dev; exit}}" < /etc/raidtab
790}
791
792
793# Searches members of raid device
794# $1: raid device (/dev/md...)
795GetRaidDevMembers() {
796    if [ ! -f /etc/raidtab ]; then 
797        return
798    fi
799    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
800}
801
802
803HackPathsToFailsafe() {
804    local incoming newpath stub i pwd
805    incoming=`ReadLine`
806    pwd=`pwd`
807    cd "$MINDI_TMP"
808    while [ "$incoming" != "" ] ; do
809        stub=`basename $incoming`
810        newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
811        for i in $newpath ; do
812            echo "$i"
813        done
814        read incoming
815    done
816    cd "$pwd"
817}
818
819
820ListAllPartitions() {
821    local res currline partition all_partitions ap_orig remaining i j
822
823    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
824    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
825    if [ -e "/vmfs/volumes" ]; then
826        # For VMWare ESX 3 get the device names of these volumes
827        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
828    fi
829    return
830}
831
832
833ListImagesForUser() {
834    local path fname
835    path=$MINDI_CACHE
836    echo -en "In the directory '$path' you will find the images:-\n"
837    for fname in `ls $path | grep -F mindi-` ; do
838        printf "%19s " $fname
839    done
840    echo " "
841}
842
843
844ListKernelModulePaths() {
845    local module_list module fname r kern
846    module_list="$MODULES"
847    # Remove unwanted modules from list
848    for i in $DENY_MODS; do
849        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
850        EXTRA_MODS=`echo ${EXTRA_MODS} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
851    done
852###
853### Sq-Modification ... Use kernelname for module search path if specified
854###
855    if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
856    then
857        kern=${kernelname}
858    else
859        kern="$KERVERRUN"
860    fi
861    export KERVER=$kern
862###
863### Sq-Mod End
864###
865    # Get rid of duplicates, so that if a live kernel module also appears
866    # in $EXTRA_MODS that it won't get reported as "live module file not found" twice.
867    for module in `echo $module_list $EXTRA_MODS | tr ' ' '\n' | sort -u` ; do
868        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
869        if [ -z "$r" ]; then
870            if [ "`echo "$MODULES" | grep -w $module`" ]; then
871                r="[live module file not found]"
872            else
873                r="[extra module file not found]"
874            fi
875        else
876            [ -f "$r" ] && echo "$r"
877        fi
878        LogFile "INFO: module $module --> $r"
879    done
880    find /lib/modules/$kern/modules.* -type f 2> /dev/null
881}
882
883#
884# Critical function which computes all dependencies (dyn. lib.)
885# for a list of binaries
886#
887LocateDeps() {
888    local incoming fname deps
889    incoming="$*"
890    for fname in $incoming ; do
891        if [ ! -e "$fname" ] ; then
892            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
893            if echo $fname | grep lvm &> /dev/null ; then
894                LogFile "          This warning only affects you if you are using LVM."
895                if echo "$MODULES" | grep lvm &> /dev/null ; then
896                    LogFile "          I think you are, so please take heed!"
897                else
898                    LogFile "          I don't think you are, so don't worry about it."
899                fi
900            fi
901        elif [ -h "$fname" ] && [ -x "$fname" ] ; then
902            LogFile "INFO: $fname is softlink"
903        else
904            ldd $fname 2> /dev/null | ProcessLDD
905        fi
906    done
907}
908
909
910# Give all symlinks recursively of a full path name
911ReadAllLink() {
912    file="$1"
913
914    echo $file | grep -q '\.\./'
915    if [ $? -eq 0 ]; then
916        # We need to normalise the path with .. in it
917        file=`echo $file | perl -pi -e 's|([^/]+)/([^/]+)/\.\./([^/]+)|$1/$3|'`
918    fi
919    echo "$file"
920    if [ ! -h $file ]; then
921        return 0
922    fi
923
924    link=`readlink $file`
925    d=`dirname $file`
926    fchar=`echo $link | cut -c1`
927    # If mother dir is a link print it
928    if [ -h "$d" ]; then
929        echo "$d"
930        d=`readlink $d`
931    fi
932    if [ "$fchar" != "/" ]; then
933        # Relative or local link
934        ReadAllLink "$d/$link" 
935    else
936        # Absolute path
937        ReadAllLink $link 
938    fi
939}
940
941
942LocateFile() {
943    local i path fname_to_find location output resolved tmp stub cache_id loclist
944    fname_to_find="$1"
945    # It's an absolute path
946    if echo "$fname_to_find" | grep -x "/.*" ; then
947        output="$fname_to_find"
948        if [ -h "$output" ] ; then
949            output="`ReadAllLink $output` $output"
950        fi
951        echo "$output"
952        return 0
953    fi
954    # It's not an absolute path
955    output=""
956    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
957    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
958        [ -h "$path" ] && continue
959        [ ! -e "$path/$fname_to_find" ] && continue
960        output="$path/$fname_to_find $output"
961        if [ -h "$path/$fname_to_find" ] ; then
962            output="`ReadAllLink $path/$fname_to_find` $output"
963        fi
964    done
965    if [ "$output" = "" ] ; then
966        return 1
967    fi
968    echo "$output"
969    return 0
970}
971
972
973# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
974MakeMondoConfigFile() {
975    local outfile use_lzo use_comp use_star
976    outfile=$1
977    > $outfile
978    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
979    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
980    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
981    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
982    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
983    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
984    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
985    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
986    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
987    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
988    echo "use-lzo $use_lzo" >> $outfile
989    echo "use-gzip $use_gzip" >> $outfile
990    echo "use-star $use_star" >> $outfile
991    echo "use-comp $use_comp" >> $outfile
992    echo "datestamp `date`" >> $outfile
993    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
994    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-IPADDR netfs-client-ipaddr $outfile
995    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-NETMASK netfs-client-netmask $outfile
996    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-BROADCAST netfs-client-broadcast $outfile
997    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-HWADDR netfs-client-hwaddr $outfile
998    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-DEFGW  netfs-client-defgw  $outfile
999    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-MOUNT  netfs-server-mount  $outfile
1000    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-USER  netfs-server-user  $outfile
1001    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-PATH   netfs-server-path   $outfile
1002    AddFileToCfgIfExists $MINDI_TMP/NETFS-DEV           netfs-dev           $outfile
1003    AddFileToCfgIfExists $MINDI_TMP/NETFS-PROTO         netfs-proto           $outfile
1004    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-IPADDR netfs-server-ipaddr $outfile
1005    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1006    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1007    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1008    AddFileToCfgIfExists $MINDI_TMP/ISODIR            isodir            $outfile
1009    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1010    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1011    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver   $outfile
1012    AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
1013    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1014    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1015    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1016    AddFileToCfgIfExists $MINDI_TMP/ACL      acl      $outfile
1017    AddFileToCfgIfExists $MINDI_TMP/XATTR      xattr      $outfile
1018    AddFileToCfgIfExists $MINDI_TMP/OBDR      obdr      $outfile
1019}
1020
1021# Get PV's for an LV
1022GetPVsForLV() {
1023  if [ -n "$1" ]; then
1024    vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1025    if [ -z "$vg" ]; then
1026      return
1027    fi
1028    $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1029  fi
1030}
1031
1032
1033MakeMountlist() {
1034    local mountlist all_partitions current_partition \
1035partition_size partition_format outstring partition_number \
1036partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1037absolute_partition old_partition_fmt current_lvolume uname skip
1038
1039    LogFile "Your raw fstab file looks like this:"
1040    LogFile "------------------------------------"
1041    cat $MY_FSTAB >> $LOGFILE
1042    LogAll "Your mountlist will look like this:"
1043    LogFile "-----------------------------------"
1044
1045# mountlist(OUT)
1046    mountlist=$1
1047
1048# NB: partition = device
1049# NB: mountpt = where the device is mounted
1050
1051    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1052
1053    [ "$mountlist" != "" ] && rm -Rf $mountlist
1054    > $mountlist
1055    all_partitions=""
1056   
1057    if [ $LVM != "false" ]; then
1058        echo -en "Analyzing LVM...\n"
1059        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1060        if [ $? -ne 0 ]; then
1061            LVM="false"
1062        fi
1063        # Excluded LVs and GVs are not reported here
1064        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1065    fi
1066    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1067    for i in $IMAGE_DEVS ; do
1068        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1069    done
1070    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1071    printf "        %-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE (MB)" LABEL/UUID | tee -a $LOGFILE
1072    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs iso9660"
1073    for c_p in $all_partitions ; do
1074        # Skip fd/cd devices, network FS, cifs
1075        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1076        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1077        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1078            current_partition=`readlink -f $c_p`
1079            [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ] && current_partition="$c_p"
1080            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1081        else
1082            current_partition="$c_p"
1083        fi
1084        [ "$c_p" = "none" ] && continue
1085        redhat_label=""
1086        label=""
1087        uuid=""
1088        absolute_partition=`readlink -f $c_p`
1089        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1090
1091        # Detects noauto partitions not mounted and exclude them
1092        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1093        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1094                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1095            continue
1096        fi
1097        # Detects bind partitions and exclude them
1098        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1099                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1100            continue
1101        fi
1102
1103        # set default in case we dont't find it
1104        str_to_find_fmt_with=$current_partition
1105
1106        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1107        # current_partition contains only first column of /etc/fstab
1108        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1109            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1110            actual_dev=""
1111
1112            # 1st try, findfs - the RHEL way of finding labels and their partitions
1113            if [ -x "/sbin/findfs" ]; then
1114                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1115            fi
1116   
1117            # 2nd try : blkid, the good way for all LABEL except swap
1118            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1119                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1120                # For LVM FS it will give a /dev/dm-# which should then be converted
1121                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1122                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1123                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1124                    for dev in `ls /dev/mapper/*`; do
1125                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1126                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1127                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1128                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1129                            break
1130                        fi
1131                    done
1132                fi
1133            fi
1134   
1135            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1136            # For LVM gives a /dev/mapper entry
1137            if [ "x$actual_dev" = "x" ]; then
1138                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1139            fi
1140   
1141            # 4th try, with vol_id
1142            # SWAP only
1143            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1144                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1145                for dev_swap in $list_swaps ; do
1146                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1147                    if [ "x$dev_exists" != "x" ]; then
1148                        actual_dev=$dev_swap
1149                        break;
1150                    fi
1151                done
1152            fi
1153
1154            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1155            # LABEL=SW-cciss/c0d0p3 (RDP)
1156            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1157            # SWAP only
1158            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1159                    skip=""
1160                    uname=$KERVERRUN
1161                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1162                    # 2.6.12 needs 16 (FC3)
1163                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1164                    # 2.6.19 and upper needs 1052
1165                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1166                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1167                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1168                    if [ $skip = "" ]; then
1169                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1170                    fi
1171                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1172                    do
1173                        # Location of the swap label for kernel 2.6
1174                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1175                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1176                            actual_dev=$try_dev
1177                        fi
1178                    done
1179            fi
1180
1181            # Check if one of all those tries has known success
1182            if [ "x$actual_dev" != "x" ]; then
1183                current_partition=$actual_dev
1184            else
1185                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1186            fi
1187        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1188        # current_partition contains only first column of /etc/fstab
1189        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1190            uuid=`echo "$current_partition" | cut -d'=' -f2`
1191            actual_dev=""
1192
1193            # 1st try, findfs - the RHEL way of finding labels and their partitions
1194            if [ -x "/sbin/findfs" ]; then
1195                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1196            fi
1197   
1198            # 2nd try : blkid, the good way for all UUID except swap
1199            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1200                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1201                # For LVM FS it will give a /dev/dm-# which should then be converted
1202                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1203                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1204                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1205                    for dev in `ls /dev/mapper/*`; do
1206                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1207                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1208                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1209                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1210                            break
1211                        fi
1212                    done
1213                fi
1214            fi
1215   
1216            # 3th try, with vol_id
1217            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1218                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1219                for dev in $list_dev ; do
1220                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1221                    if [ "x$dev_exists" != "x" ]; then
1222                        actual_dev=$dev
1223                        break;
1224                    fi
1225                done
1226            fi
1227
1228            # 4th try, with dumpuuid (VMWare only ?) for swap
1229            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1230                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1231                for dev in $list_dev ; do
1232                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1233                    if [ "x$dev_exists" != "x" ]; then
1234                        actual_dev=$dev
1235                        break;
1236                    fi
1237                done
1238            fi
1239
1240            # Check if one of all those tries has known success
1241            if [ "x$actual_dev" != "x" ]; then
1242                current_partition=$actual_dev
1243            else
1244                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1245            fi
1246        else
1247            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1248            # they use symlinks in fstab unrelated to what is shown in mount !
1249            if [ _"$partition_mountpt" = _"" ]; then
1250                # set default in case we dont't find it
1251                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1252                        if [ _"`readlink -f $tmpp`" = _"$current_partition" ]; then
1253                            str_to_find_fmt_with=$tmpp
1254                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1255                            break;
1256                        fi
1257                done
1258            fi
1259        fi
1260
1261        # Look for devices which have to be excluded
1262        skip=0
1263        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1264            l=""
1265            list_of_devices="`ReadAllLink $current_partition`"
1266            for d in $list_of_devices; do
1267                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1268            done
1269
1270            # Remove PVs from LVs excluded
1271            l="$l `GetPVsForLV $current_partition`"
1272
1273            # We want a single unique list
1274            list_of_devices="`echo $l | sort -u`"
1275
1276            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1277                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1278                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1279                    skip=1
1280                    continue
1281                fi
1282            done
1283        fi
1284        if [ $skip -eq 1 ]; then
1285            continue
1286        fi
1287
1288        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1289        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1290        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1291        # the former is then a link to the latter, so we test whether
1292        # $current_partition is actually such a link or not and set
1293        # $current_lvolume accordingly. On Debian you may find more than one answer
1294        # so we remove the one corresponding to /dev/.static
1295        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1296        # principle is the same and we need to find the link to it as well.
1297        # Note that $current_lvolume may well be an
1298        # ordinary device. It is just to make sure that we feed the right value
1299        # into any of the LVM tools if possible.
1300
1301        current_lvolume="$current_partition"
1302        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1303            # .static dir are a Debian specificity
1304            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1305            echo $current_lvolume | grep -q ' '
1306            if [ $? -eq 0 ]; then
1307                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1308            fi
1309            # if it's not found, it may well be a real device such as a multipath one
1310            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1311            if [ _"$current_lvolume" = _"" ]; then
1312                current_lvolume="$current_partition"
1313            fi
1314        fi
1315        #
1316        # End of LVM device style variation code (other than $current_lvolume).
1317
1318        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1319            # Size computed via LVM not directly
1320            partition_size="lvm"
1321        else
1322            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1323            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1324            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1325                # Skip swap files
1326                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1327                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1328                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1329                [ "$partition_format" != "swap" ] && partition_format="swap"
1330                if [ "$partition_size" = "" ] ; then
1331                    totalsize=0
1332                    items=0
1333                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1334                        totalsize=$(($totalsize+$i))
1335                        items=$(($items+1))
1336                    done
1337                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1338                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1339                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1340                fi
1341            else
1342                partition_size=`SizeOfPartition $current_partition`
1343            fi
1344        fi
1345        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1346        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1347        if [ "$partition_mountpt" = "" ] ; then
1348            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1349                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1350                    partition_mountpt="raid"
1351                    partition_format="raid"
1352                else
1353                    partition_mountpt="lvm"
1354                    partition_format="lvm"
1355                fi
1356            fi
1357        fi
1358        psz=$partition_size
1359        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1360        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1361        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1362            partition_mountpt="image"
1363            old_partition_fmt=$partition_format
1364            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1365            partition_size=$(($partition_size+1)); # just in case
1366            if [ "$partition_format" = "Linux" ] ; then
1367                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1368                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1369                partition_format=$old_partition_fmt
1370            fi
1371        fi
1372
1373        if [ ! "$partition_mountpt" ] ; then
1374            LogFile "------- $FDISK -l $qq log ------------"
1375            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1376                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1377                [ "$partition_format" ] && break
1378            done
1379            LogFile "------- $FDISK log end ------------"
1380            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1381                partition_format="compaq"
1382            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1383                LogIt "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1384                continue
1385            fi
1386        fi
1387        if [ "$redhat_label" ]; then
1388            label="$redhat_label"
1389        elif [ "$uuid" ]; then
1390            label="$uuid"
1391        fi
1392        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1393        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1394        unofficial_outstring=`printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1395        if [ "$current_partition" = "" ] ; then
1396            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1397        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1398            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1399                partition_mountpt=raid
1400                partition_format=raid
1401                printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1402                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1403            else
1404                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1405            fi
1406        elif [ "$partition_format" = "" ] ; then
1407            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1408        elif [ "$partition_size" = "" ] ; then
1409            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1410        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1411            continue
1412        else
1413            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1414                LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1415                partition_format="vfat"
1416            fi
1417            printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1418            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1419        fi
1420    done
1421}
1422
1423CheckMountlist() {
1424    local file=$1
1425    # Coherency verification
1426    ML01=`cat $file | wc -l`
1427    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1428    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1429    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1430    if [ "$ML01" -ne "$ML1" ]; then
1431        LogFile "--------------------------------------------"
1432        LagAll "WARNING: Duplicate device entry in mountlist"
1433        LogFile "--------------------------------------------"
1434    fi
1435    if [ "$ML02" -ne "$ML2" ]; then
1436        LogFile "--------------------------------------------"
1437        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1438        LogFile "------------------------------------------------"
1439    fi
1440}
1441
1442MakeSureNumberIsInteger() {
1443    res=`echo "$1" | tr -s '\-[0-9]' ' '`
1444    if [ "$res" != " " ] && [ "$res" != "" ] ; then
1445    echo "result = '$res'"
1446        Die "$1 should be an integer"
1447    fi
1448}
1449
1450
1451OfferToMakeBootableISO() {
1452    local i old_pwd
1453    if [ -z "$ISO_CMD" ]; then
1454        LogIt "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1455        return
1456    fi
1457    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1458        echo -en "Shall I make a bootable CD image? (y/[n]) "
1459        read i
1460        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1461    fi
1462    rm -Rf $MINDI_TMP/iso
1463    mkdir -p $MINDI_TMP/iso/{images,archives}
1464    cp -f $MINDI_CACHE/{*.gz,*.img} $MINDI_TMP/iso/images 2>> $LOGFILE || LogIt "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1465    LogFile "INFO: mindi_lib = $MINDI_LIB"
1466    for i in memdisk memtest.bin memtest.img ; do
1467        j=$MINDI_LIB/$i
1468        k=$MINDI_TMP/iso
1469        if [ -e "$j" ] ; then
1470            LogIt "INFO: Copying $j to $k"
1471            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1472            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1473            if [ _"$MONDO_SHARE" != _"" ]; then 
1474                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1475            fi
1476        fi
1477    done
1478    MakeMessageFile | cut -c1-80 > $MINDI_TMP/iso/message.txt
1479    if [ $KERNEL_IS_XEN = "yes" ]; then
1480        cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1481        cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1482    fi
1483    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1484    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1485
1486    if [ _"$MONDO_SHARE" != _"" ]; then 
1487        if [ $KERNEL_IS_XEN = "yes" ]; then
1488            cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1489            cp $MBOOTC32 $MONDO_ROOT/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1490        fi
1491        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1492        cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1493    fi
1494    MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1495    if [ "$ARCH" != "ia64" ] ; then
1496        cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1497    fi
1498    old_pwd=`pwd`
1499    cd "$MINDI_TMP/iso"
1500    if [ "$ARCH" != "ia64" ] ; then
1501        if [ _"$MONDO_SHARE" != _"" ]; then 
1502            cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1503            if [ $KERNEL_IS_XEN = "yes" ]; then
1504                cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1505            fi
1506            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1507        fi
1508        $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1509    else
1510        $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1511    fi
1512    if [ "$?" -ne "0" ] ; then
1513        LogFile "----------- $ISO_CMD's errors --------------"
1514        LogAll "$ISO_CMD returned the following errors:"
1515        cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1516        LogIt "ERROR: Failed to create ISO image."
1517    else
1518        LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1519    fi
1520    rm -f $MINDI_TMP/mkisofs.log
1521    cd "$old_pwd"
1522}
1523
1524
1525OfferToMakeBootableUSB() {
1526    local i
1527    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1528        echo -n "Shall I make a bootable USB device ? (y/[n]) "
1529        read i
1530        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1531        if [ "$USBDEVICE" = "" ]; then
1532            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1533            read dev
1534            USBDEVICE=$dev
1535        fi
1536        echo "WARNING: This will erase all content on $USBDEVICE"
1537        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1538        read i
1539        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1540    fi
1541    rm -Rf $MINDI_TMP/usb
1542    mkdir -p $MINDI_TMP/usb
1543    USBPART="${USBDEVICE}1"
1544
1545    echo -en "Transforming $USBDEVICE in a Bootable device " 
1546    echo -en "."
1547    LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1548    LogFile "INFO: Checking $USBDEVICE"
1549    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1550    if [ $? -ne 0 ]; then
1551        LogAll "ERROR: Unable to access $USBDEVICE"
1552        LogAll "       Make sure your USB device is pluged in"
1553        MindiExit -1
1554    fi
1555    echo -en "."
1556    LogFile "INFO: Unmounting $USBPART just in case"
1557    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1558    # If your key has no MBR it may cause an issue
1559    # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1560    if [ -r $MBRFILE ]; then
1561        LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1562        dd if=$MBRFILE of=$USBDEVICE
1563    else
1564        LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1565        LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1566    fi
1567    LogFile "INFO: Preparing $USBDEVICE"
1568    cat > $MINDI_TMP/fdisk.txt << EOF
1569d
1570d
1571d
1572d
1573n
1574p
15751
1576
1577
1578t
1579b
1580a
15811
1582w
1583EOF
1584    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1585    if [ $? -ne 0 ]; then
1586        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1587        LogAll "       Make sure your USB device is pluged in"
1588        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1589        MindiExit -1
1590    fi
1591    LogFile "fdisk build file"
1592    LogFile "----------------"
1593    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1594    LogFile "----------------"
1595    rm -f $MINDI_TMP/fdisk.txt
1596    LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1597    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1598    echo -en "."
1599    # Calling kpartx in case devices were not created
1600    if [ -x /sbin/kpartx ]; then
1601        /sbin/kpartx -a $USBDEVICE
1602    fi
1603    # Some distro do auto mount at that point (Ubuntu)
1604    LogFile "INFO: Unmounting $USBPART just in case again"
1605    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1606    echo -en "."
1607    LogFile "INFO: Creating a vfat filesystem on $USBPART"
1608    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1609    if [ $? -ne 0 ]; then
1610        LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1611        LogAll "       Make sure your USB device is pluged in and partitioned ($USBPART must exist on it)"
1612        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1613        MindiExit -1
1614    fi
1615    echo -en "."
1616    LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1617    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1618    if [ $? -ne 0 ]; then
1619        LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1620        LogAll "       Make sure your USB device is pluged in, partitioned and formated ($USBPART must exist on it)"
1621        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1622        MindiExit -1
1623    fi
1624    echo -en "."
1625    mkdir -p $MINDI_TMP/usb/images
1626    cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogIt "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1627    echo -en "."
1628    LogFile "INFO: mindi_lib = $MINDI_LIB"
1629    for i in memdisk memtest.bin memtest.img ; do
1630        j=$MINDI_LIB/$i
1631        k=$MINDI_TMP/usb
1632        if [ -e "$j" ] ; then
1633            LogIt "INFO: Copying $j to $k"
1634            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1635            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1636        fi
1637    done
1638    echo -en "."
1639    MakeMessageFile | cut -c1-80 > $MINDI_TMP/usb/message.txt
1640    echo -en "."
1641    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1642    echo -en "."
1643    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1644    echo -en "."
1645    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1646    echo -en "."
1647    LogAll "----------- syslinux's conf --------------"
1648    cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1649    LogAll "------------------------------------------"
1650    umount $MINDI_TMP/usb
1651    if [ "$ARCH" != "ia64" ] ; then
1652        syslinux -v 2>&1 | grep -q 4.02
1653        if [ $? -eq 0 ]; then
1654            # This buggy version of syslinux requires a call to --stupid and not -s
1655            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1656            res=$?
1657        else
1658            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1659            res=$?
1660        fi
1661        if [ $res -ne 0 ] ; then
1662            LogAll "----------- syslinux's errors --------------"
1663            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1664            LogAll "------------------------------------------"
1665            LogIt "ERROR: Failed to create USB image."
1666        else
1667            echo -e "$DONE"
1668            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1669        fi
1670        rm -f $MINDI_TMP/syslinux.log
1671    else
1672        LogAll "ERROR: No USB boot support for ia64"
1673        MindiExit -1
1674    fi
1675}
1676
1677
1678MakeMessageFile() {
1679   
1680    if [ -x "/bin/lsb_release" ]; then
1681        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1682    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors                             
1683        DESC="Arch Linux"                                                                                                           
1684        if [ -r /var/log/pacman.log ]; then                                                                                         
1685            # there are no releases but we can get the last system upgrade                                                     
1686            # Output example:   Arch Linux [2011-03-03 01:39]                                                                   
1687            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"                           
1688        fi
1689    elif [ -r /etc/issue.net ]; then
1690        DESC=`head -1 /etc/issue.net`
1691    elif [ -r /etc/issue ]; then
1692        DESC=`head -1 /etc/issue`
1693    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1694        # For pb >= 0.9.8
1695        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4`
1696    else
1697        DESC="Unknown desc"
1698    fi
1699    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1700    if [ _"$MONDO_SHARE" != _"" ]; then
1701        if [ "$CDRECOVERY" != "yes" ] ; then
1702            if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1703                echo -en "Press <enter> to continue.\n"
1704            elif [ ! "$MINDI_TMP" ] ; then
1705                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1706                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1707                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1708                fi
1709            else
1710                echo -en "$BOOT_MEDIA_MESSAGE"
1711            fi
1712        else
1713            echo -en "\
1714To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1715CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1716        fi
1717    fi
1718    echo -en "\n\n\n"
1719}
1720
1721
1722MakeBootConfFile() {
1723    local options i ooo
1724    options=""
1725    # Type of boot file (elilo or syslinux/isolinux)
1726    type=$1
1727    if [ "$type" = "elilo" ]; then
1728        sep="="
1729    else
1730        sep=" "
1731    fi
1732
1733    # Generic header for conf file
1734    if [ "$type" != "elilo" ] ; then
1735        echo -en "prompt 1\ndisplay message.txt\n"
1736    else
1737        echo -en "prompt\n"
1738    fi
1739
1740    # Compute which default option to boot from
1741    if [ "$CDRECOVERY" = "yes" ] ; then
1742        echo -en "default${sep}RESTORE\n"
1743    # In case it's mondoarchive
1744    elif [ _"$MONDO_SHARE" != _"" ]; then
1745        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1746            echo -en "default${sep}iso\n"
1747        else
1748            echo -en "default${sep}interactive\n"
1749        fi
1750    else
1751        echo -en "default${sep}expert\n"
1752    fi
1753
1754    # Handle timeout
1755    if [ "$CDRECOVERY" != "yes" ] ; then
1756        echo -en "timeout${sep}300\n"
1757    else
1758        echo -en "timeout${sep}10000\n"
1759    fi
1760    echo -en "\n"
1761
1762    # prepare which labels will be generated
1763    if [ "$CDRECOVERY" = "yes" ] ; then
1764        options="RESTORE expert"
1765    else
1766        if [ _"$MONDO_SHARE" != _"" ]; then
1767            options="interactive expert compare iso nuke isonuke"
1768        else
1769            options="expert"
1770        fi
1771    fi
1772
1773    # Generate rest of conf file
1774    for i in $options ; do
1775        ooo=$i
1776        [ "$ooo" = "RESTORE" ] && ooo="nuke"
1777        if [ "$type" = "elilo" ]; then
1778            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1779        else
1780            ps="/"
1781            if [ "$type" = "syslinux" ]; then
1782                ps=""
1783            fi
1784            if [ $KERNEL_IS_XEN = "no" ]; then
1785                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1786            else
1787                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1788            fi
1789        fi
1790        echo -en "$outstr"
1791    done
1792    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1793        if [ "$type" = "elilo" ]; then
1794            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1795            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1796        else
1797            ps="/"
1798            if [ "$type" = "syslinux" ]; then
1799                ps=""
1800            fi
1801            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1802            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1803        fi
1804    fi
1805}
1806
1807
1808PrepareBootDiskImage_LILO() {
1809    local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1810    imagesdir=$MINDI_CACHE
1811    kernelpath=$1
1812
1813    retval=0
1814    [ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
1815    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1816    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1817    echo -en "..."
1818    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1819    mountpoint=$MINDI_TMP/mountpoint.$$
1820    mkdir -p $mountpoint
1821    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1822    mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1823    mount -t vfat -o loop $imagefile $mountpoint || LogIt "ERROR: Cannot mount (PBDI)"
1824    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1825    mkdir -p $mountpoint/etc
1826    liloconf=$mountpoint/elilo.conf
1827
1828    MakeBootConfFile elilo > $liloconf
1829
1830    # Copy it so that CD-ROM menu entry is satisfied
1831    mountefi=0
1832    df -T | grep /boot/efi | grep -q vfat
1833    if [ $? -ne 0 ]; then
1834        mount /boot/efi
1835        if [ $? -ne 0 ]; then
1836            echo "You have to mount your EFI partition when using mindi"
1837            MindiExit -1
1838        fi
1839        mountefi=1
1840    fi
1841    el=`find /boot/efi -name elilo.efi`
1842    cp $el $mountpoint
1843    cp $liloconf $mountpoint
1844    if [ $mountefi -eq 1 ]; then
1845        umount /boot/efi 2>&1 > /dev/null
1846    fi
1847
1848    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
1849    cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1850    if [ "$?" -ne "0" ] ; then
1851        LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1852        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1853        LogIt "       Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1854        rm -f $MINDI_TMP/mtpt.$$
1855        LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1856        retval=$(($retval+1))
1857    fi
1858    MakeMessageFile | cut -c1-80 > $mountpoint/message.txt
1859
1860    mkdir -p $mountpoint/tmp
1861    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1862        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1863    fi
1864
1865    # copy the kernel across
1866    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1867    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1868    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1869    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1870    if [ "$?" -ne "0" ] ; then
1871        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1872        du -sk $mountpoint/* >> $LOGFILE
1873        LogFile "--- end of list of files ---"
1874        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1875        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1876        cd "$old_pwd"
1877        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1878        rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1879    #   losetup /dev/loop0 -d
1880        [ "$imagefile" != "" ] && rm -f $imagefile
1881        LogIt "ERROR: Sorry, your kernel is too big for your image"
1882        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1883        return 0
1884    fi
1885    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1886    LogFile "INFO: Free space left on image = $free_space KB"
1887    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1888    # make it bootable
1889    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1890    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1891    if [ "$KERN_DISK_MADE" ] ; then
1892        LogFile "INFO: Not running LILO. It's not that kind of disk."
1893    fi
1894
1895    cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1896    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1897    echo -en "..."
1898    rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1899    if [ "$retval" -eq "0" ] ; then
1900        echo -en "...$DONE\n"
1901        if [ "$KERN_DISK_MADE" ] ; then
1902            LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1903        fi
1904    else
1905        echo -en "...failed\n"
1906        LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1907        [ "$imagefile" != "" ] && rm -f $imagefile
1908    fi
1909    [ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
1910    return $retval
1911}
1912
1913
1914PrepareBootDiskImage_ISOLINUX() {
1915    local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage
1916    imagesdir=$MINDI_CACHE
1917    kernelpath=$1
1918    do_boot_root_thingy=""
1919    local retval old_pwd
1920    retval=0
1921
1922    [ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
1923    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1924    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1925    echo -en "..."
1926    imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
1927    mountpoint=$MINDI_TMP/mountpoint.$$
1928    mkdir -p $mountpoint
1929    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1930    LogFile "INFO: Creating vfat filesystem on $imagefile"
1931    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1932    # syslinux should be run on a  local file (doen't work through NFS Cf: #297)
1933    syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1934
1935    # Only move it now to its final destination and use it now
1936    mv $imagefile $imagesdir
1937    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1938
1939    mount -t vfat -o loop $imagefile $mountpoint || LogIt "ERROR: Cannot mount (PBDI)"
1940
1941    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1942    MakeMessageFile | cut -c1-80 > $mountpoint/message.txt
1943    MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
1944    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1945    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1946    if [ "$?" -ne "0" ] ; then
1947        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1948        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1949        LogAll "       Please unload some of your modules and try again."
1950        rm -f $MINDI_TMP/mtpt.$$
1951        LogAll "       Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
1952        LogAll "       Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1953        retval=$(($retval+1))
1954    fi
1955
1956    mkdir -p $mountpoint/tmp
1957    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1958        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1959    fi
1960
1961    # copy the kernel across
1962    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1963    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1964    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1965         
1966    retval=0
1967    cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
1968    retval=$?
1969    if [ $KERNEL_IS_XEN = "yes" ]; then
1970        cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
1971        let retval+=$?
1972    fi
1973 
1974    if [ "$retval" -ne "0" ] ; then
1975        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1976        du -sk $mountpoint/* >> $LOGFILE
1977        LogFile "--- end of list of files ---"
1978        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1979        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1980        cd "$old_pwd"
1981        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1982        rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1983
1984        LogIt "ERROR: Sorry, your kernel is too big for your image"
1985        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1986    fi
1987    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1988    LogFile "INFO: Free space left on image = $free_space KB"
1989    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1990
1991    # make it bootable
1992    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1993    mkdir -p $mountpoint/etc
1994    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1995    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1996    echo -en "..."
1997    rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1998
1999    if [ "$retval" -eq "0" ] ; then
2000        echo -en "...$DONE\n"
2001        if [ "$KERN_DISK_MADE" ] ; then
2002            [ "$imagefile" != "" ] && rm -f $imagefile
2003            LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2004        fi
2005    else
2006        echo -en "...failed\n"
2007        LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2008        [ "$imagefile" != "" ] && rm -f $imagefile
2009    fi
2010    [ "$retval" -ne "0" ] && LogIt "ERROR: PrepareBootDiskImage() is returning nonzero"
2011    return $retval
2012}
2013
2014
2015ParseModprobeForIncludes() {
2016local MODPROBE_CONF mpincfile includes include
2017
2018MODPROBE_CONF=/etc/modprobe.conf
2019mpincfile=$1
2020touch $mpincfile
2021if [ -a $MODPROBE_CONF ]; then
2022    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2023    if [ -n "$includes" ]; then
2024        for include in $includes
2025        do
2026            if [ -a "$include" ]; then
2027                echo $include >> $mpincfile
2028            fi
2029        done
2030    fi
2031fi
2032}
2033
2034
2035PrepareDataDiskImages() {
2036    local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
2037
2038    imagesdir=$MINDI_CACHE
2039    rm -f $imagesdir/mindi.iso
2040    needlist=$MINDI_TMP/what-we-need.txt
2041    bigdir=$MINDI_TMP/bigdir
2042    mkdir -p $bigdir/usr/bin
2043    mkdir -p $bigdir/usr/sbin
2044    includefile=$MINDI_TMP/$$.includefile.txt
2045
2046    if [ -e "$DEPLIST_FILE" ]; then
2047        lfiles="$DEPLIST_FILE $DEPLIST_DIR/*"
2048    else
2049        lfiles="$DEPLIST_DIR/*"
2050    fi
2051    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2052    ParseModprobeForIncludes $includefile
2053    lines=$(($lines+`cat $includefile | wc -l`))
2054    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2055    res=$?
2056    rm -f $includefile
2057    if [ "$YOUR_KERNEL_SUCKS" ]; then
2058        pwd=`pwd`
2059        cd "$MINDI_TMP"
2060        for i in `ListKernelModulePaths | HackPathsToFailsafe` ; do
2061            tar cf - ./$i 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || Die "PDDI can't copy $i->$bigdir" $MINDI_TMP/$$.log
2062        done
2063        for i in $EXTRA_MODS ; do
2064            j=`find lib/modules/$FAILSAFE_KVER -name $i.*o.gz 2> /dev/null`
2065            [ ! "$j" ] && LogFile "WARNING: cannot find failsafe module $i.o.gz"
2066            for k in $j ; do
2067                tar cf - $k 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogIt "ERROR: module $k extraction issue" $MINDI_TMP/$$.log
2068                LogFile "INFO: Added failsafe module $k to ramdisk"
2069            done
2070        done
2071        cd "$pwd"
2072    else
2073        ListKernelModulePaths >> $needlist
2074    fi
2075    if [ "$res" -ne "0" ] ; then
2076        Die "You have $res files present in dependency list\nbut absent from filesystem."
2077    fi
2078    FindAndAddUserKeyboardMappingFile
2079    mkdir -p $bigdir/tmp
2080    if [ _"$MONDO_SHARE" != _"" ]; then
2081        MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2082        cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
2083    fi
2084    [ -d "/mnt/.boot.d" ] && echo "Oh Jebus" > $bigdir/tmp/DUMBASS-GENTOO
2085    DropOptimizedLibraries $needlist $bigdir
2086    echo -en "Assembling dependency files"
2087    CopyDependenciesToDirectory < $needlist $bigdir
2088
2089    # also copy io.sys and msdos.sys, if we can find them
2090    for i in `mount | cut -d' ' -f3` ; do
2091        for j in io.sys msdos.sys ; do
2092            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2093        done
2094    done
2095
2096    # master boot record, too
2097    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2098    if [ "$i" ] ; then
2099        LogIt "INFO: Backing up $i's MBR"
2100        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2101        sleep 1
2102        sync
2103        j=$i
2104        [ -h "$j" ] && j=`readlink -f $j`
2105        LogIt "INFO: Creating /dev/boot_device ($j)"
2106        mkdir -p $bigdir/dev
2107        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2108    fi
2109
2110    old_pwd=`pwd`
2111    cd "$bigdir"
2112
2113    # Get terminfo content
2114    ti="usr/share/terminfo/l"
2115    if [ -d /$ti ]; then
2116        mkdir -p $ti
2117        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogIt "ERROR: issue copying terminfo"
2118    fi
2119    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2120        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2121        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2122    fi
2123    if [ -d "/lib/dev-state" ]; then 
2124        tar cf - -C / ./lib/dev-state 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2125    fi
2126    cd "$old_pwd"
2127    echo -e "$DONE"
2128    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2129    MakeMountlist $MINDI_TMP/mountlist.txt
2130    CheckMountlist $MINDI_TMP/mountlist.txt
2131    mkdir -p $bigdir/tmp
2132    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2133    if [ _"$MONDO_SHARE" != _"" ]; then
2134        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2135    fi
2136    if [ $LVM != "false" ]; then
2137        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2138        if [ "$?" -ne "0" ]; then
2139            LVM="false"
2140            rm -f $bigdir/tmp/i-want-my-lvm
2141        else
2142            LogFile "Your i-want-my-lvm file content is:"
2143            LogFile "-----------------------------------"
2144            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2145            LogFile "-----------------------------------"
2146        fi
2147    fi
2148    LogFile "Your mountlist.txt file content is:"
2149    LogFile "-----------------------------------"
2150    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2151    LogFile "-----------------------------------"
2152
2153    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2154    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2155    if [ _"$MONDO_SHARE" != _"" ]; then
2156        for q in filelist.full.gz biggielist.txt ; do
2157            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2158            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2159        done
2160    fi
2161
2162    echo -en "Tarring and zipping the data content..."
2163    size_of_all_tools=`du -sk $bigdir | cut -f1`
2164    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $imagesdir/all.tar.gz || LogIt "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2165    du -sk $imagesdir/*gz >> $LOGFILE
2166    echo -e "$DONE"
2167
2168    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2169    rm -rf $bigdir
2170    rm -f $needlist
2171}
2172
2173
2174ProcessLDD() {
2175    local incoming f d nd bd bnd
2176    read incoming
2177    while [ "$incoming" != "" ]; do
2178        # We take the full path name of the dyn. lib. we want
2179        incoming=`echo "$incoming" | $AWK '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
2180        for f in $incoming ; do
2181            # echo modified file name if one of the parent dir is a link
2182            # by replacing the original dirname by the destination of the link
2183            d="`dirname $f`"
2184            found="false"
2185            while [ "$d" != "/" ]; do
2186                if [ -h "$d" ]; then
2187                    nd=`readlink -f $d`
2188                    bd=`basename $d`
2189                    bnd=`basename $nd`
2190                    f=`echo $f | sed "s~/$bd/~/$bnd/~"`
2191                    echo $d
2192                fi
2193                d="`dirname $d`"
2194            done
2195
2196            echo "$f"
2197            echo "`ReadAllLink $f`"
2198        done
2199        read incoming
2200    done
2201}
2202
2203
2204Prompt() {
2205    echo -en "$1"
2206    read line
2207}
2208
2209
2210ReadLine() {
2211    local i incoming
2212    read incoming
2213    i=0
2214    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2215        i=$(($i+1))
2216        read incoming
2217    done
2218    echo "$incoming"
2219}
2220
2221
2222SizeOfPartition() {
2223    local devpath drive res stub
2224    device=$1
2225    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2226        Die "Cannot find $device's size - is your /etc/fstab sane?"
2227    fi
2228    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2229        res=`SizeOfRaidPartition $device`
2230        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2231        echo "$res"
2232        return 0
2233    fi
2234    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2235    res=`$FDISK -s $device 2>> $LOGFILE`
2236    # end patch
2237    # take only the first in case of multiple mount (cifs, nfs, ...)
2238    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2239    [ "$res" = "" ] && res="-1"
2240    echo $res
2241    return 0
2242}
2243
2244
2245SizeOfRaidPartition() {
2246    local real_dev smallest_size silly tmp
2247
2248    silly=999999999
2249    smallest_size=$silly
2250
2251    for real_dev in `GetRaidDevMembers $1` ; do
2252        tmp=`SizeOfPartition $real_dev`
2253        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2254    done
2255
2256    if [ "$smallest_size" = "$silly" ] ; then
2257        echo "-1"
2258        return 1
2259    else
2260        echo "$smallest_size"
2261        return 0
2262    fi
2263}
2264
2265
2266StripComments()
2267{
2268    local tempfile
2269
2270    tempfile=$MINDI_TMP/$$.strip.txt
2271    cp -f $1 $tempfile 2>> $LOGFILE
2272    $AWK '{if (substr($0,0,1)!="#" || substr($0,0,3)=="#!/") {print $0;};}' $tempfile > $1
2273    rm -f $tempfile
2274    LogFile "INFO: Stripped comments from $2"
2275}
2276
2277
2278
2279StripExecutable()
2280{
2281    local tmpfile
2282
2283    tmpfile=$MINDI_TMP/stripped.$$.dat
2284    [ -d "$1" ] || [ -h "$1" ] && return
2285    cp -f $1 $tmpfile 2>> $LOGFILE
2286    strip $tmpfile 2> /dev/null
2287    if [ "$?" -eq "0" ] ; then
2288        cp -f $tmpfile $1 2>> $LOGFILE
2289        LogFile "INFO: Stripped binary $2"
2290    fi
2291    rm -f $tmpfile
2292}
2293
2294KernelVer() {
2295        local fkern_ver fname
2296
2297        fname=$1
2298        file $fname | grep -q gzip
2299        if [ "$?" -eq "0" ] ; then
2300            # Used by ia64
2301            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2302        else
2303            fkern_ver=`strings $fname 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2304        fi
2305        echo "$fkern_ver"
2306}
2307
2308
2309# WARNING: This function should just echo the final result !!!
2310#
2311TryToFindKernelPath() {
2312    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2313
2314    we_want_version=$KERVERRUN
2315    possible_kernels=""
2316    duff_kernels=""
2317    output=""
2318   
2319    if [ "$ARCH" = "ia64" ] ; then
2320       root="/boot/efi/efi"
2321    else
2322       root="/"
2323    fi
2324    # See if we're booted from a Xen kernel
2325    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2326    if [ -f /proc/xen/capabilities ]; then
2327        # It's a Xen kernel
2328        KERNEL_IS_XEN="yes"
2329        LogFile "INFO: It's a Xen kernel..."
2330    fi
2331
2332    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/'` ; do
2333        [ ! -e "$fname" ] && continue
2334        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2335        fkern_ver=`KernelVer $fname`
2336        [ "$fkern_ver" = "" ] && continue
2337        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2338        [ -f "$fname" ] || continue
2339        [ -h "$fname" ] && continue
2340        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2341        file $fname | grep -q gzip
2342        if [ "$?" -eq "0" ] ; then
2343            # Used by ia64
2344            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2345                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2346                duff_kernels="$fname $duff_kernels"
2347            else
2348                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2349                possible_kernels="$fname $possible_kernels"
2350            fi
2351        else
2352            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2353                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2354                duff_kernels="$fname $duff_kernels"
2355            else
2356                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2357                possible_kernels="$fname $possible_kernels"
2358            fi
2359        fi
2360    done
2361    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2362        possible_kernels=`find /boot/vmlinuz-2.* | tail -n1`
2363    fi
2364    if [ ! "$possible_kernels" ] ; then
2365        LogFile "INFO: No kernel matches exactly. Are there any duff kernels?"
2366        possible_kernels="$duff_kernels"
2367        if [ ! "$possible_kernels" ] ; then
2368            LogFile "INFO: Sorry, no duff kernels either"
2369        else
2370            LogFile "INFO: I bet you're running Debian or Gentoo, aren't you?"
2371            LogFile "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2372        fi
2373    fi
2374    if [ $KERNEL_IS_XEN = "yes" ]; then
2375        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2376        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2377        FindMboot32Binary
2378    fi
2379    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2380    noof_kernels=`CountItemsIn "$possible_kernels"`
2381    if [ "$noof_kernels" -eq "0" ] ; then
2382        LogFile "Could not find your kernel."
2383        if [ -e "/boot/vmlinuz" ] ; then
2384            LogFile "INFO: Using /boot/vmlinuz as a last resort."
2385            output=/boot/vmlinuz
2386        else
2387            output=""
2388        fi
2389    elif [ "$noof_kernels" -eq "1" ] ; then
2390        kp=`echo "$possible_kernels" | sed s/' '//`
2391        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2392        output="$kp"
2393    else
2394        for i in $possible_kernels ; do
2395            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2396                LogFile "INFO: OK, I used my initiative and found that "
2397                LogFile "INFO: $i is probably your kernel. "
2398                output="$i"
2399                break
2400            fi
2401        done
2402        if [ ! -n "$output" ]; then
2403            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2404                output=/boot/vmlinuz
2405                LogFile "INFO: Schlomo, this one's for you."
2406            else
2407                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2408                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2409                LogFile "INFO: $possible_kernels"
2410                output=""
2411            fi
2412        fi
2413    fi
2414    if [ $KERNEL_IS_XEN = "yes" ]; then
2415        if [ "$noof_xenkernels" -eq "0" ]; then
2416            xenkernelpath=""
2417        elif [ "$noof_xenkernels" -eq "1" ]; then
2418            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2419            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2420        else
2421            for i in $possible_xenkernels ; do
2422                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2423                    LogFile "INFO: OK, I used my initiative and found that "
2424                    LogFile "INFO: $i is probably your Xen kernel. "
2425                    xenkernelpath="$i"
2426                    break
2427                fi
2428            done
2429            if [ ! -n "$xenkernelpath" ]; then
2430                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2431                if [ ! -n "$new_possible_xenkernels" ]; then
2432                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2433                    LogFile "INFO: Using $xenkernelpath"
2434                else
2435                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2436                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2437                    LogFile "INFO: $possible_xenkernels"
2438                    output=""
2439                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2440                    LogFile "INFO: Using $xenkernelpath"
2441                fi
2442            fi
2443        fi
2444        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2445            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2446        fi
2447    fi
2448    LogAll "TryToFindKernelPath found $output"
2449    echo "$output"
2450}
2451
2452
2453TurnTgzIntoRdz() {
2454    local tgz_dir_fname rdz_fname tempfile mountpoint old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path
2455
2456    tgz_dir_fname=$1
2457    rdz_fname=$2
2458    kernelsize=$3
2459    maxsize=$(($BOOT_SIZE-$kernelsize))
2460    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2461    tempfile=$MINDI_TMP/temp.rd
2462    mountpoint=$MINDI_TMP/mnt1
2463    res=0
2464    echo -en "..."
2465    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2466    echo -en "..."
2467    LogFile "INFO: Creating ext2 filesystem on $tempfile"
2468    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2469    echo -en "..."
2470    mkdir -p $mountpoint
2471    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2472    echo -en "..."
2473    old_pwd=`pwd`
2474    cd "$mountpoint"
2475
2476    # AL04Oct08: Check whether /lib64 is a link and if so explicitly create one in rootfs
2477    if [ -h "/lib64" ]; then
2478        mkdir -p lib || LogIt "ERROR: Unable to create lib in $mountpoint."
2479        ln -s lib lib64 || LogIt "ERROR: /lib64 is a symbolic link, but I couldn't create it in $mountpoint."
2480    fi
2481
2482    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2483    for f in $tgz_dir_fname/*; do 
2484        if [ ! -r $f ]; then
2485            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2486        else
2487            cp -Rdf $f . 2>&1 >> $LOGFILE
2488        fi
2489    done
2490    tar -zxf symlinks.tgz || Die "Cannot untar symlinks.tgz"
2491
2492    cd dev || Die "Can't cd to dev"
2493    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2494    rm -f dev-entries.tgz
2495    cd ..
2496
2497    for w in insmod.static insmod.static.old ; do
2498        s=`which $w 2> /dev/null`
2499        if [ -e "$s" ] ; then
2500            tar cf - -C / $s 2> /dev/null | tar xf -
2501        fi
2502    done
2503
2504    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2505   
2506    # Copy of files mandatory for ssh to automate mount if sshfs is used
2507    mkdir $mountpoint/.ssh
2508    cp -rp ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2509    echo > $mountpoint/tmp/myssh << EOF
2510ssh -o StrictHostKeyChecking=no $*
2511EOF
2512    chmod 755 $mountpoint/tmp/myssh
2513
2514    # Copy of files mandatory for ld.so
2515    cp -rp /etc/ld.so.c* $mountpoint/etc
2516
2517    # Handle the case where busybox and mount are dynamically linked
2518    file $MINDI_LIB/rootfs/bin/busybox 2>&1 | grep -q "dynamically" 
2519    if [ $? -eq 0 ]; then
2520        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2521        rm -f bin/mount
2522    fi
2523
2524    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf file (which includes all busybox deps)
2525    mountlis=`grep -E "mount|fuse|ssh|libnss" $DEPLIST_FILE $DEPLIST_DIR/* | grep -v " *#.*" | cut -d: -f2 | sort -u`
2526    rm -f $MINDI_TMP/minimal.lis
2527    for f in $MINDI_LIB/rootfs/bin/busybox $mountlis; do
2528        echo $f >> $MINDI_TMP/minimal.lis
2529    done
2530    LocateDeps $MINDI_LIB/rootfs/bin/busybox $mountlis >> $MINDI_TMP/minimal.lis
2531    for f in `cat $MINDI_TMP/minimal.lis`; do
2532        echo "`ReadAllLink $f`" >> $MINDI_TMP/minimal.lis
2533    done
2534    # Initial / are trucated by tar
2535    finallist=""
2536    # Remove directories from the list, as tar will create them anyway
2537    # and it may hurt if /lib is in it as on Debian/Ubuntu
2538    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2539        if [ ! -d $f ]; then
2540            finallist="$finallist $f"
2541        fi
2542    done
2543    tar cf - $finallist 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in minimal analysis" $MINDI_TMP/$$.log
2544
2545    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2546    grep -q bin/bash $MINDI_TMP/minimal.lis
2547    if [ $? -eq 0 ]; then
2548        ln -sf bin/bash bin/sh
2549        LogIt "INFO: Using bash as default shell"
2550    fi
2551    rm -f $MINDI_TMP/minimal.lis
2552
2553    # Avoids an issue on some distro (RHEL5)
2554    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2555
2556    mkdir -p $mountpoint/tmp
2557    # Management of udev (which includes modprobe in rules)
2558    ps auxww | grep -v grep | grep -qw udevd
2559    if [ $? -eq 0 ]; then
2560        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2561        LogIt "INFO: udev device manager found"
2562        tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
2563        # This avoids NIC remapping if on another machine at restore time on Debian at least
2564        rm -f ./etc/udev/rules.d/z[0-9][0-9]_persistent-net.rules
2565        # This avoids NIC remapping if on another machine at restore time on Ubuntu at least
2566        rm -f ./etc/udev/rules.d/[0-9][0-9]-persistent-net.rules
2567        # Do not do it if it's a link (Ubuntu 64 bits #503)
2568        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [  ! -h "/lib64/udev" ]; then
2569            tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
2570        fi
2571        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2572            tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
2573        fi
2574        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2575            tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
2576        fi
2577        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ]; then
2578            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2579            lis=""
2580            # Get only the files which exist in that list
2581            # and potentially their symlink structure
2582            for i in $lis2; do
2583                if [ -h $i ]; then
2584                    j=$i
2585                    while [ -h $j ]; do
2586                        lis="$lis $j"
2587                        j=`readlink $j`
2588                    done
2589                    lis="$lis $j"
2590                elif [ -f $i ]; then
2591                    lis="$lis $i"
2592                fi
2593            done
2594            # And their deps
2595            LocateDeps $lis > $MINDI_TMP/udev.lis
2596            for i in $lis; do
2597                if [ "`echo $i | cut -c1`" = "/" ]; then
2598                    j=`echo $i | cut -c2-`
2599                    [ "$j" != "" ] && rm -f $j
2600                fi
2601            done
2602            tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2603            rm -f $MINDI_TMP/udev.lis
2604        else
2605            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2606            LogAll "         mindi will use static devices which may cause problems"
2607            rm -f $mountpoint/tmp/USE-UDEV
2608        fi
2609    fi
2610
2611    # Management of potential HW info (ProLiant only at the moment)
2612    rm -rf $MINDI_CACHE/bkphw
2613    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2614    if [ -d $MINDI_CACHE/bkphw ]; then
2615        LogIt "INFO: Hardware Information found and saved ..."
2616        cp -rp $MINDI_CACHE/bkphw .
2617        if [ -f $MINDI_CACHE/tools.files ]; then
2618            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2619            LocateDeps $lis > $MINDI_TMP/tools.lis
2620            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
2621        fi
2622        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2623            mv -f $MINDI_CACHE/mindi-rsthw .
2624            chmod 755 ./mindi-rsthw
2625        fi
2626        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2627    fi
2628
2629    # Management of perl scripts delivered needed at restore time
2630    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` > $MINDI_TMP/perl.lis
2631    tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
2632
2633    for w in cdrom groovy-stuff ; do
2634        mkdir -p mnt/$w
2635    done
2636
2637    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
2638
2639    cd "$old_pwd"
2640    echo -en "..."
2641    old_pwd=`pwd`
2642    if [ "$YOUR_KERNEL_SUCKS" ] ; then
2643        cd "$MINDI_TMP"
2644        needed_modules_path=lib/modules/$FAILSAFE_KVER
2645    else
2646        cd /
2647        if [ "${kernelname}" != "" ]
2648        then
2649            needed_modules_path=lib/modules/${kernelname}
2650        else
2651            needed_modules_path=lib/modules/$KERVERRUN
2652        fi
2653    fi
2654
2655    needed_modules=""
2656    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2657
2658    if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
2659        # For PXE boot
2660        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2661    fi
2662    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2663        list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2664    fi
2665    for i in $DENY_MODS; do
2666        LogFile "INFO: Removing $i from the list of modules to load"
2667        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2668    done
2669
2670    [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
2671    for i in $list_of_groovy_mods ; do
2672        needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
2673    done
2674
2675    for i in `echo $needed_modules  | tr ' ' '\n' | sort -u`; do
2676        [ -e "$i" ] && s=`du -sk $i | cut -f1` || s=""
2677        [ "$YOUR_KERNEL_SUCKS" ] && i=$MINDI_TMP/$i
2678        LogFile "INFO: Adding $i ($s KB) to the rootfs"
2679        tar cf - -C / $i 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy $i to $mountpoint" $MINDI_TMP/$$.log
2680        # Uncompress modules if not using udev and native modprobe
2681        if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2682            if [ "`echo "$i" | grep -F ".gz"`" ]; then
2683                LogFile "INFO: Uncompressing $i"
2684                gunzip -f $mountpoint/$i
2685            fi
2686        fi
2687        if [ -L $mountpoint/$i ] && [ `echo "$i" | grep "\.ko$"` ]; then
2688            echo "Replacing module symlink ($i) with actual file"
2689            rm -f $mountpoint/$i
2690            cp -Lf $i $mountpoint/$i
2691            ls -l $mountpoint/$i
2692        fi
2693    done
2694
2695    # Also copy modules.* in case of udev so that normal modprobe works
2696    tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
2697
2698    # Copy FW in case some drivers needs it
2699    if [ -d "/lib/firmware" ]; then
2700        cp -rp /lib/firmware $mountpoint/lib
2701    fi
2702
2703    # Copy an additional ProLiant tool for OBDR support
2704    if [ -f $MINDI_TMP/OBDR ]; then
2705        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2706            mkdir -p $mountpoint/usr/bin
2707            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2708            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved OBDR support"
2709        else
2710            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode tool"
2711            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2712        fi
2713    fi
2714
2715    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2716        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2717        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2718        [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && LogFile "      ...because kernel is failsafe"
2719        rm -f $mountpoint/sbin/devfsd
2720    fi
2721    cd "$old_pwd"
2722    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2723    dd if=/dev/zero of=$mountpoint/zero &> /dev/null
2724    rm -f $mountpoint/zero
2725    if [ _"$MONDO_SHARE" != _"" ]; then
2726        MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2727        cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy mondo-restore.cfg to ramdisk"
2728        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2729        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2730        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2731        [ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2732        [ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2733        [ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2734        [ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2735    fi
2736    mkdir -p $mountpoint/proc
2737    LogFile "---------------------------"
2738    LogFile "Content of initial ramdisk:"
2739    LogFile "---------------------------"
2740    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2741    LogFile "---------------------------"
2742
2743    # Determine what filesystem to use for initrd image
2744    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2745    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2746    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2747    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2748        # say what will be used
2749        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2750        # kernel expects linuxrc in ext2 filesystem
2751        ( cd "$mountpoint" && ln -sf sbin/init linuxrc )
2752        # unmount loop filesystem and create image file using the standard approach
2753        umount $mountpoint || Die "Cannot unmount $tempfile"
2754        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2755        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2756            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2757        else
2758            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2759        fi
2760        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2761        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2762        rm -f ${rdz_fname}.tmp
2763        # log that we are done
2764        LogFile "      ...done."
2765    elif [ "$gvFileSystem" = "initramfs" ]; then
2766        # say what will be used
2767        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2768        # make sure that cpio is there
2769        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2770        # go into filesystem
2771        cd "$mountpoint"
2772        # kernel expects init in cpio filesystem
2773        ln -sf sbin/init init
2774        # create cpio image file and unmount loop filesystem
2775        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2776        cd "$old_pwd"
2777        umount $mountpoint || Die "Cannot unmount $tempfile"
2778        # log that we are done
2779        LogFile "      ...done."
2780    else
2781        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2782    fi
2783
2784    if [ "$res" -eq "0" ] ; then
2785        echo -en "..."
2786    else
2787        echo -en "\rMade an rdz WITH ERRORS.           \n"
2788    fi
2789    return 0
2790}
2791
2792
2793##############################################################################
2794#----------------------------------- Main -----------------------------------#
2795##############################################################################
2796
2797# Now we can create what we need
2798mkdir -p $MINDI_TMP
2799
2800# Purge from potential old run
2801if [ _"$MINDI_CACHE" = _"" ]; then
2802    Die "MINDI_CACHE undefined"
2803fi
2804
2805# --nolog needs to be first, and is used in analyze-my-lvm
2806if [ "$1" = "--nolog" ] ; then
2807    shift
2808    LOGFILE=/dev/stderr
2809else
2810    > $LOGFILE
2811fi
2812if [ "$1" = "--printvar" ] ; then
2813    shift
2814    if [ _"$1" != _"" ] ; then
2815        set | grep -Ew "^$1" | cut -d= -f2
2816    fi
2817    exit 0
2818fi
2819
2820LogFile "mindi v$MINDI_VERSION"
2821LogFile "$ARCH architecture detected"
2822LogFile "mindi called with the following arguments:"
2823echo "$@">> $LOGFILE
2824LogFile "Start date : `date`"
2825LogFile "-----------------------------"
2826
2827[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && ln -sf /sbin/mkdosfs /sbin/mkfs.vfat
2828
2829# Log some capital variables
2830[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2831LogFile "MONDO_SHARE = $MONDO_SHARE"
2832LogFile "MINDI_LIB = $MINDI_LIB"
2833LogFile "MINDI_SBIN = $MINDI_SBIN"
2834[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2835LogFile "MINDI_CONF = $MINDI_CONF"
2836if [ -f $MINDI_CONFIG ]; then
2837    LogFile "-----------------------------"
2838    LogFile " Mindi configuration file    "
2839    LogFile "-----------------------------"
2840    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2841    LogFile "-----------------------------"
2842fi
2843LogFile "In Mindi"
2844LogFile "--------"
2845LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2846LogFile "BOOT_SIZE = $BOOT_SIZE"
2847LogFile "--------"
2848
2849trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2850
2851# Sanity checks
2852which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2853which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2854which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2855which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2856if which awk &> /dev/null ; then
2857    if ! which gawk &> /dev/null ; then
2858        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2859    fi
2860fi
2861which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2862[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2863
2864[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2865
2866# Update the PATH variable if incomplete
2867if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2868    PATH=$PATH:/sbin:/usr/sbin
2869    export PATH
2870    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2871    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2872    LogFile "INFO:  Or you might like to call 'su -' instead of 'su', for example."
2873fi
2874
2875# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
2876if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ] && [ "$kernelpath" = "FAILSAFE" ]; then
2877    source $MINDI_LIB/FindDistroFailsafe
2878    # Log kernel image
2879    LogIt "INFO: FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
2880else
2881    [ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null | grep -E "2\.[46]" | cut -d' ' -f1`
2882fi
2883
2884if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2885    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2886fi
2887
2888### BERLIOS
2889### Fix as it's not mandatory on ia64
2890if [ "$ARCH" = "ia64" ] ; then
2891    if which elilo &> /dev/null ; then
2892        LILO_EXE=elilo
2893    else
2894        LILO_EXE=`which false 2> /dev/null`
2895    fi
2896else
2897    FindIsolinuxBinary
2898fi
2899trap "Aborted" SIGTERM
2900DONE="\r\t\t\t\t\t\t\t\tDone.         "
2901kernelpath=""
2902MONDO_ROOT=/var/cache/mondo
2903mkdir -p $MONDO_ROOT
2904
2905if [ -d "/proc/lvm" ]; then
2906    # LVM v1
2907    LVMCMD=""
2908    LVM="v1"
2909elif [ -d "/dev/mapper" ]; then
2910    # LVM v2
2911    LVMCMD="lvm"
2912    LVM="v2"
2913else
2914    LVM="false"
2915fi
2916LogFile "INFO: LVM set to $LVM"
2917LogFile "----------"
2918LogFile "mount result:"
2919LogFile "-------------"
2920mount >> $LOGFILE
2921if [ -e /etc/raidtab ]; then
2922    LogFile "-------------"
2923    LogFile "/etc/raidtab content:"
2924    LogFile "-------------"
2925    cat /etc/raidtab >> $LOGFILE
2926fi
2927if [ -e /etc/mdadm.conf ]; then
2928    LogFile "-------------"
2929    LogFile "/etc/mdadm.conf content:"
2930    LogFile "-------------"
2931    cat /etc/mdadm.conf >> $LOGFILE
2932fi
2933LogFile "-------------"
2934LogFile "cat /proc/cmdline:"
2935LogFile "-------------"
2936cat /proc/cmdline >> $LOGFILE
2937LogFile "-------------"
2938LogFile "cat /proc/swaps:"
2939LogFile "-------------"
2940cat /proc/swaps >> $LOGFILE
2941LogFile "-------------"
2942LogFile "cat /proc/mdstat:"
2943LogFile "-------------"
2944cat /proc/mdstat >> $LOGFILE
2945LogFile "-------------"
2946LogFile "cat /proc/partitions:"
2947LogFile "-------------"
2948cat /proc/partitions >> $LOGFILE
2949LogFile "-------------"
2950LogFile "cat /proc/filesystems:"
2951LogFile "-------------"
2952cat /proc/filesystems >> $LOGFILE
2953LogFile "-------------"
2954LogFile "lsmod result:"
2955LogFile "-------------"
2956lsmod >> $LOGFILE
2957MODULES="`cat /proc/modules | $AWK '{print $1}'`"
2958if [ -x /usr/sbin/esxcfg-module ]; then
2959    LogFile "-------------"
2960    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
2961    LogFile "-------------"
2962    LogFile "VMWare modules"
2963    LogFile "-------------"
2964    /usr/sbin/esxcfg-module -l >> $LOGFILE
2965    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
2966fi
2967LogFile "FORCE_MODS:"
2968LogFile "-------------"
2969LogFile $FORCE_MODS
2970LogFile "-------------"
2971LogFile "DENY_MODS:"
2972LogFile "-------------"
2973LogFile $DENY_MODS
2974LogFile "-------------"
2975LogFile "df result:"
2976LogFile "----------"
2977df -T >> $LOGFILE
2978LogFile "-------------"
2979LogFile "List of extra modules is:"
2980LogFile "$EXTRA_MODS"
2981LogFile "-------------"
2982
2983# Compute libata version
2984laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
2985# If libata v2 is used then remove ide-generic as it will perturbate boot
2986if [ "`echo $MODULES | grep libata`" ]; then
2987    if [ "$laver" = "2" ]; then
2988        DENY_MODS="$DENY_MODS ide-generic"
2989        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
2990        LogFile "-------------"
2991    fi
2992fi
2993
2994# Check for McAfee which disturbs the access to some files (tgz in articular)
2995if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
2996    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
2997    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
2998    LogFile "WARNING: You have two options:"
2999    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3000    LogFile "WARNING:  - Disable the scanner during the backup"
3001fi
3002
3003# Check for ISO_CMD command
3004if [ ! -x $ISO_CMD ]; then
3005    LogFile "NOTE: No CD image (ISO file) utility found"
3006fi
3007
3008FLOPPY_WAS_MOUNTED=""
3009for mtpt in /media/floppy /mnt/floppy /floppy ; do
3010    if mount | grep -w $mtpt &> /dev/null ; then
3011        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3012        umount $mtpt
3013    fi
3014done
3015
3016#
3017# If we have a USB device we need to store info
3018# and remove it from the parameters line
3019#
3020if [ "$#" -ne "0" ] ; then
3021    if [ "$1" = "--usb" ] ; then
3022        shift
3023        USBDEVICE=$1
3024        if [ _"$USBDEVICE" = _"" ]; then
3025            Die "No USB device specified"
3026        fi
3027        shift
3028    fi
3029fi
3030
3031if [ "$#" -ne "0" ] ; then
3032    if [ "$1" = "--findkernel" ] ; then
3033        resk=`TryToFindKernelPath`
3034        # Avoids logfile content for mondo
3035        export MONDO_SHARE=""
3036        if [ "$resk" = "" ] ; then
3037            if [ $KERNEL_IS_XEN = "yes" ]; then
3038                echo "$xenkernelpath"
3039                LogFile "INFO: xenkernelpath = $xenkernelpath"
3040                MindiExit 0
3041            else
3042                MindiExit -1
3043            fi
3044        else
3045            echo "$resk"
3046            LogFile "INFO: kernelpath = $resk"
3047            MindiExit 0
3048        fi
3049    elif [ "$1" = "--locatedeps" ] ; then
3050        [ ! "$2" ] && Die "Please specify the binary to look at"
3051        LocateDeps $*
3052        # Avoids logfile content for mondo
3053        export MONDO_SHARE=""
3054        MindiExit $?
3055    elif [ "$1" = "--readalllink" ] ; then
3056        [ ! "$2" ] && Die "Please specify the binary to look at"
3057        # Avoids logfile content for mondo
3058        export MONDO_SHARE=""
3059        ReadAllLink $2
3060        MindiExit $?
3061    elif [ "$1" = "--makemessage" ] ; then
3062        MakeMessageFile | cut -c1-80
3063        MindiExit 0
3064    elif [ "$1" = "--makemountlist" ] ; then
3065        [ ! "$2" ] && Die "Please specify the output file"
3066        MakeMountlist $2
3067        CheckMountlist $2
3068        # Avoids logfile content for mondo
3069        export MONDO_SHARE=""
3070        MindiExit $?
3071    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3072        echo "Mindi v$MINDI_VERSION"
3073        # Avoids logfile content for mondo
3074        export MONDO_SHARE=""
3075        MindiExit 0
3076    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3077        MONDO_TMP=$2
3078        # Change MINDI_TMP for the one provided by mondo
3079        # So that it can get back the built files
3080        if [ _"$MONDO_TMP" = _"" ]; then
3081            Die "MONDO_TMP is empty, aborting"
3082        fi
3083        if [ _"$MONDO_TMP" = _"/" ]; then
3084            Die "MONDO_TMP is /, aborting"
3085        fi
3086        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3087        rmdir $MINDI_TMP
3088        export MINDI_TMP=$MONDO_TMP
3089        mkdir -p $MINDI_TMP
3090
3091        # This is the scratch dir in mondo - subdir images
3092        MINDI_CACHE=$3
3093
3094        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3095        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3096       
3097###
3098### Sq-Modification...
3099### Attempt to locate kernel specific module path
3100### if module path is found then use it other wise use uname -r to set it...
3101###
3102        if [ $KERNEL_IS_XEN = "yes" ]; then
3103            LogIt "INFO: xenkernelpath = $xenkernelpath"
3104        fi
3105        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3106        if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
3107        then
3108           LogIt "WARNING: Module path for ${kernelpath} not found..."
3109           LogIt "         using running kernel\'s modules."
3110           kernelname=$KERVERRUN
3111        fi
3112        LogIt "INFO: kernelname = $kernelname"
3113        LogIt "INFO: kernelpath = $kernelpath"
3114###
3115### end of Sq-Modification
3116###
3117        TAPEDEV=$5
3118        TAPESIZE=$6
3119        FILES_IN_FILELIST=$7
3120        USE_LZO=$8
3121        CDRECOVERY=$9
3122        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3123            IMAGE_DEVS=""
3124        else
3125            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3126        fi
3127        if [ "${11}" ] ; then
3128            LILO_OPTIONS=""
3129    #       LogIt "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3130        fi
3131        LAST_FILELIST_NUMBER=${12}
3132        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3133        export MINDI_EXCLUDE_DEVS="${14}"
3134        USE_COMP="${15}"
3135        USE_LILO="${16}"
3136        USE_STAR="${17}"
3137        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3138        DIFFERENTIAL="${19}"
3139        USE_GZIP="${20}"
3140        NOT_BOOT="${21}"
3141        [ "$USE_COMP" = "" ] && USE_COMP=yes
3142        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3143        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3144        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3145        # MONDO_ROOT is the real scratchdir
3146        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3147        if [ _"$MONDO_ROOT" != _"" ]; then
3148            mkdir -p $MONDO_ROOT
3149        else
3150            Die "MONDO_ROOT is undefined"
3151        fi
3152    else
3153        echo "Syntax: mindi (--custom ....)" >> /dev/stderr
3154        MindiExit -1
3155    fi
3156fi
3157
3158if [ _"$MINDI_CACHE" != _"" ]; then
3159    rm -rf $MINDI_CACHE/* 2> /dev/null
3160    mkdir -p $MINDI_CACHE
3161fi
3162
3163[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3164
3165if [ _"$MONDO_SHARE" = _"" ]; then
3166    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3167    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3168    LogIt "BusyBox sources are available from http://www.busybox.net"
3169    LogIt "------------------------------------------------------------------------------"
3170else
3171    LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
3172fi
3173if [ -f $MINDI_LIB/rootfs/bin/busybox ]; then
3174    LogIt "Mindi-`$MINDI_LIB/rootfs/bin/busybox 2>&1 | head -1`"
3175else
3176    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3177    MindiExit -1
3178fi
3179
3180for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3181    modinfo 2> /dev/null 1> /dev/null
3182    if [ $? -eq 0 ]; then
3183        modprobe $i 2>&1 > /dev/null
3184    fi
3185done
3186
3187KERN_DISK_MADE=""
3188
3189LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3190LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3191LogFile "NOT_BOOT = '$NOT_BOOT'"
3192if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3193    LogIt "INFO: Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
3194    MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
3195    MakeMountlist $MINDI_TMP/mountlist.txt
3196    CheckMountlist $MINDI_TMP/mountlist.txt
3197    mkdir -p $MINDI_TMP/small-all/tmp
3198    cd "$MINDI_TMP/small-all"
3199    cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3200    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3201    sleep 2
3202    LogIt "Done. Exiting."
3203    MindiExit 0
3204fi
3205
3206if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3207    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3208fi
3209
3210if [ "$kernelpath" = "" ] ; then
3211    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3212    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3213    read ch
3214    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3215        USE_OWN_KERNEL="yes"
3216    else
3217        USE_OWN_KERNEL="no"
3218    fi
3219    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3220        YOUR_KERNEL_SUCKS=""
3221        kernelpath=`TryToFindKernelPath`
3222        if [ "$kernelpath" = "" ] ; then
3223            echo -n "Please enter kernel path : "
3224            read kernelpath
3225        fi
3226    else
3227        YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
3228    fi
3229fi
3230if [ "$YOUR_KERNEL_SUCKS" != "" ] || [ "$kernelpath" = "" ] || [ "$kernelpath" = "SUCKS" ] || [ "$kernelpath" = "FAILSAFE" ] ; then
3231    # If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
3232    if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ]; then
3233        source $MINDI_LIB/FindDistroFailsafe
3234        # Log kernel image
3235        LogIt "INFO: FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
3236        kernelpath="$FAILSAFE_KBIN"
3237        LogIt "INFO: I shall include a failsafe kernel, not your kernel, in the boot disks."
3238        LogIt "      The failsafe kernel is $kernelpath."
3239        LogIt "      However, you are still running your kernel. If Mindi fails to create your"
3240        LogIt "      disks then it may still be a result of a problem with your kernel."
3241        pwd=`pwd`
3242        cd "$MINDI_TMP"
3243        mkdir -p lib/modules
3244        cp -a "/lib/modules/$FAILSAFE_KVER" "lib/modules/$FAILSAFE_KVER" || Die "Cannot copy kernel modules."
3245        cd "$pwd"
3246    else
3247        kernelpath=$MINDI_LIB/vmlinuz
3248        LogIt "INFO: I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
3249        LogIt "      However, you are still running your kernel. If Mindi fails to create your"
3250        LogIt "      disks then it may still be a result of a problem with your kernel."
3251        pwd=`pwd`
3252        cd "$MINDI_TMP"
3253        bzip2 -dc $MINDI_LIB/lib.tar.bz2 | tar -x || Die "Cannot unzip lib.tar.bz2"
3254        cd "$pwd"
3255    fi
3256    YOUR_KERNEL_SUCKS="Your kernel sucks"
3257fi
3258echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3259[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3260
3261[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it.\nGo to http://www.mondorescue.org and download it, then install it."
3262
3263PrepareDataDiskImages
3264
3265ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3266rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3267export ramdisk_size=$rds
3268
3269LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3270if [ "$ARCH" = "ia64" ] ; then
3271    PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
3272else
3273    PrepareBootDiskImage_ISOLINUX $kernelpath || Die "Failed to create $ramdisk_size MB disk image."
3274fi
3275
3276[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3277...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3278
3279if [ _"$MONDO_SHARE" = _"" ]; then
3280    ListImagesForUser
3281    OfferToMakeBootableISO
3282    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3283        OfferToMakeBootableUSB
3284    fi
3285elif [ "$TAPEDEV" ] ; then
3286    if [ "$ARCH" != "ia64" ] ; then
3287        # We need to keep the img file as boot file for ia64 platform
3288        rm -f $MINDI_CACHE/{*img,*iso}
3289    else
3290        rm -f $MINDI_CACHE/*iso
3291    fi
3292    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3293        OfferToMakeBootableUSB
3294    fi
3295    OfferToMakeBootableISO
3296    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3297        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3298    else
3299        Die "Cannot find all.tar.gz, to be written to tape"
3300    fi
3301elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3302    OfferToMakeBootableUSB
3303else
3304    OfferToMakeBootableISO
3305fi
3306# cleanup
3307LogIt "INFO: $FRIENDLY_OUTSTRING"
3308for mtpt in $FLOPPY_WAS_MOUNTED ; do
3309    mount $mtpt
3310done
3311MindiExit 0
Note: See TracBrowser for help on using the repository browser.