Context Navigation

source: MondoRescue/branches/3.0/mindi/mindi@ 3075

Visit:

Last change on this file since 3075 was 3075, checked in by Bruno Cornec, 11 years ago
Handle better the symlinks during the copy of content in order to support the /lib issue for F17. To be tested. Works natively on Mandriva 2010.
Property svn:executable set to ``* Property svn:keywords set to `Rev Id`
File size: 120.9 KB

Rev	Line
[747]	1	#!/bin/bash
	2
	3	# $Id: mindi 3075 2012-11-23 22:50:01Z bruno $
	4	#
	5	#-----------------------------------------------------------------------------
	6	# mindi - mini-Linux distro based on the user's filesystem & distribution
	7	#
[1880]	8	# Mindi can create a multi-image boot/root kit. The first image is the boot
[747]	9	# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
	10	# the third disk is data disk #2; and so it goes.
	11	#
	12	# See http://www.mondorescue.org for details.
	13	#-----------------------------------------------------------------------------
	14
	15	### Which arch are we on (useful for ia64 port)
[1565]	16	ARCH=`/bin/uname -m`
[2292]	17	KERVERRUN=`/bin/uname -r`
	18	# By default we use the running kernel as a reference
	19	KERVER=$KERVERRUN
[747]	20
[2442]	21	# In case of problem with udev you can try to add udevdebug
[2564]	22	MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
[3053]	23	MINDI_DEFAULT_BOOT_OPTION="interactive"
	24	# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
	25	# So this parameter only applies to non CD recovery.
	26	MINDI_BOOT_TIMEOUT="300"
[747]	27
[1691]	28	MINDI_REV=PBREV
	29	MINDI_VER=PBVER
[747]	30
	31	MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
	32	MINDI_PREFIX=XXX
	33	MINDI_CONF=YYY
	34	MINDI_SBIN=${MINDI_PREFIX}/sbin
[934]	35	MINDI_LIB=LLL
[747]	36
[925]	37	# Temporary directory for mindi
	38	TMPDIR=/tmp
	39
[3033]	40	EXTRA_SPACE=120000 # increase if you run out of ramdisk space
	41	BOOT_SIZE=65600 # size of the boot disk
[747]	42
	43	PROMPT_MAKE_CD_IMAGE="yes"
	44	# Ask if you want to make a CD Image to be written?
	45	# if this is set to 'no', then the image will be created automatically
	46
[1684]	47	PROMPT_MAKE_USB_IMAGE="yes"
	48	# Ask if you want to make a USB Image to be written?
	49	# if this is set to 'no', then the image will be created automatically
	50
[966]	51	USE_OWN_KERNEL="yes"
[747]	52	# If set to "no", you will be prompted for whether or not
	53	# you want to use your own kernel, or the supplied default.
	54	# If "yes" mindi will automatically use your own kernel.
[925]	55
[2629]	56	KERNEL_IS_XEN="no"
	57	# If set to "no", the kernel is not a Xen kernel
	58	# If "yes", mindi will modify isolinux.cfg for the Xen kernel.
[2880]	59	xenkernelpath=""
[2629]	60
[747]	61	MY_FSTAB=/etc/fstab
	62	TAPE_MODS="ht st osst ide-tape ide_tape"
[3071]	63	SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 libcxgbi iscsi_boot_sysfs iscsi_target_mod iscsi_tcp libiscsi libiscsi2 scsi_transport_iscsi scsi_transport_iscsi2 libiscsi_tcp uio isp megaraid megaraid_mm megaraid_mbox megaraid_sas mega_sr mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qla2xxx_conf qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod scsi_transport_sas scsi_transport_spi scsi_transport_fc sd_mod crc_t10dif crc-t10dif seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule scsi_dh scsi_tgt emcpdm emcpgpx emcpmpx emcp scsi_dh_emc scsi_dh_alua dc395x diskdumplib scsi_dump_register arcmsr"
[747]	64
	65	# ide-probe-mod
[3012]	66	IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs ide-core ide_core ide-gd_mod ide_gd_mod edd paride ata_generic ide_pci_generic ata_piix libata dock via82cxxx generic nvidia ahci libahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw blkbk virtio virtio_ring virtio_pci virtio_blk virtio_balloon"
[747]	67	PCMCIA_MODS="pcmcia_core ds yenta_socket"
[3036]	68	USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_common usb-common usb_storage input hid hid_generic uhci_hcd ehci_hcd uhci-hcd ehci-hcd ohci-hcd ohci_hcd xhci usbkbd usbhid keybdev mousedev libusual scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
[3071]	69	NET_MODS="auth_rpcgss sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 cnic be2net 8021q bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 libphy pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse crc32c libcrc32c netbk xenblktap r8169 virtio_net via_rhine garp"
[2861]	70	CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660 vfat fat"
[1993]	71	# Those modules will only go on the backup media, not the boot media.
[3071]	72	EXTRA_MODS="$CDROM_MODS loop md-mod linear raid0 raid1 xor raid10 raid5 raid456 raid6_pq async_pq xor async_tx async_memcpy async_xor lvm-mod dm-mod dm_mod dm-snapshot dm_snapshot dm-zero dm_zero dm-mirror dm_mirror dm-multipath dm-round-robin dm-emc dm-hp-sw dm-rdac dm-region-hash dm-snapshot dm-log multipath jfs xfs btrfs zlib_deflate xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache ext4 jbd2 crc16 ocfs2 ocfs2_dlm ocfs2_nodemanager configfs vxodm vxgms vxglm gab llt dmpaa vxspec vxio vxdmp vxportal fdd vxfs "
[1230]	73	# Replace with that line for HP OCMP e.g.
[2073]	74	#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
[3055]	75	DENY_MODS="kqemu vxfen"
[1399]	76	# Force some modules to be included
[1354]	77	FORCE_MODS=""
[925]	78
[2857]	79	# Find MBR in case of bootable USB device to build
[2855]	80	MBRFILE=/usr/lib/syslinux/mbr.bin
[2857]	81	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
	82	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
	83	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
	84	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
[2855]	85
[747]	86	LOGFILE=/var/log/mindi.log
[1880]	87	MINDI_CACHE=/var/cache/mindi
[747]	88	BOOT_MEDIA_MESSAGE="\
	89	To format and restore all files automatically, type 'nuke' <enter>.\n\
	90	To restore some/all files interactively, type 'interactive' <enter>.\n\
	91	To compare the archives with your filesystem, type 'compare' <enter>.\n\
	92	To boot to a command-line prompt (expert mode), type 'expert' <enter>.\n\
	93	You may add one or more of the following parameters as well:-\n\n\
	94	donteject - mondorestore will not eject the CD; this is useful if, for\n\
	95	instance, your PC's case has a concealed CD-ROM drive\n\
	96	noresize - your mountlist will not be adjusted to use your unallocated\n\
	97	hard disk space\n\
	98	textonly - do not call any Newt library routines; this is unattractive\n\
	99	but valuable if you find your Newt library has bugs in it\n\n\
	100	e.g. Type 'nuke donteject textonly' if you have an unstable Newt library and \n\
	101	a PC whose CD-ROM drive tray would be damaged if it unexpectedly ejected.\n\
	102	"
[925]	103	FDISK=$MINDI_SBIN/parted2fdisk
[747]	104
[925]	105	# Using a config file allow to overwrite some values
	106	MINDI_CONFIG="$MINDI_CONF/mindi.conf"
	107	if [ -f $MINDI_CONFIG ]; then
	108	. $MINDI_CONFIG
	109	fi
[1885]	110	DEPLIST_FILE="$MINDI_CONF/deplist.txt"
[2409]	111	DEPLIST_DIR="$MINDI_CONF/deplist.d"
	112
[1885]	113	ISO_CMD="/usr/bin/mkisofs"
	114	ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
[925]	115
[2457]	116	# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
	117	# However, they use exactly the same command line parameters, so just
	118	# use genisoimage if it's available.
	119	if [ ! -x $ISO_CMD ]; then
	120	ISO_CMD=/usr/bin/genisoimage
	121	fi
	122
[2685]	123
[2880]	124	# Function to log on screen only
	125	LogScreen() {
	126	if [ -e /dev/stderr ] ; then
	127	echo -e "$1" >> /dev/stderr
	128	elif [ -e /usr/bin/logger ] ; then
	129	/usr/bin/logger -s $1
	130	fi
	131	}
[2685]	132
[2880]	133	# Function to log in log file only
	134	LogFile() {
	135
	136	echo -e "$1" >> $LOGFILE
	137	if [ _"$2" != _"" ]; then
	138	grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
	139	fi
	140	rm -f "$2"
	141	}
	142
	143	# Function to log in both screen and logfile
	144	LogAll() {
	145	LogScreen "$1"
	146	LogFile "$1" "$2"
	147	}
	148
	149	# Preserved for compatibility
	150	LogIt() {
	151	LogAll "$1" "$2"
	152	}
	153
[2963]	154	# Last function called before exiting
	155	# Parameter is exit code value
	156	# Should be declared here as used immediately below potentialy
	157	MindiExit() {
[2978]	158	echo "Mindi $MINDI_VERSION is exiting" >> $LOGFILE
	159	echo "End date : `date`" >> $LOGFILE
[2963]	160	if [ _"$MONDO_SHARE" != _"" ] ; then
	161	echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
[2995]	162	if [ -f $LOGFILE ]; then
	163	cat $LOGFILE >> /var/log/mondoarchive.log
	164	else
	165	echo "No LOGFILE available in that mindi run" >> /var/log/mondoarchive.log
	166	fi
[2963]	167	echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
	168	fi
[2880]	169
[2963]	170	cd /
	171	sync&
	172
	173	# Clean temporary files only when standalone mindi
	174	if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
	175	rm -Rf $MINDI_TMP
	176	fi
	177	exit $1
	178	}
	179
[2685]	180	Die() {
	181	local i
	182	if [ "$1" = "" ] ; then
	183	LogIt "FATAL ERROR"
	184	else
	185	LogIt "FATAL ERROR. $1"
	186	fi
	187	if [ _"$2" != _"" ]; then
	188	grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
	189	fi
	190	rm -f "$2"
	191
	192	LogIt "Please e-mail a copy of $LOGFILE to the mailing list."
	193	LogIt "See http://www.mondorescue.org for more information."
	194	LogIt "WE CANNOT HELP unless you enclose that file.\n"
	195	MindiExit -1
	196	}
	197
[1485]	198	# Now we can create what we need
[2150]	199	MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
	200	if [ $? -ne 0 ]; then
	201	df $TMPDIR
	202	Die "Unable to create a temporary directory ! Check space on $TMPDIR"
	203	fi
[2153]	204	if [ _"$MINDI_TMP" = _"" ]; then
	205	Die "MINDI_TMP is empty, aborting"
	206	fi
	207	if [ _"$MINDI_TMP" = _"/" ]; then
	208	Die "MINDI_TMP is /, aborting"
	209	fi
[2150]	210	export MINDI_TMP
[940]	211
[747]	212	# ----------------------------------------------------------------------------
	213
	214
	215	AbortHere() {
	216	[ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
	217	Die "Program is terminating in response to signal received from OS/user"
	218	}
	219
	220
	221	Aborted() {
	222	trap SIGHUP SIGTERM SIGTRAP SIGINT
[1880]	223	[ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindiimg $MINDI_CACHE/gz $MINDI_CACHE/mindi.iso
[747]	224	[ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
	225	Die "User abort."
	226	}
	227
	228
	229	AddFileToCfgIfExists() {
	230	[ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
	231	}
	232
	233
	234	AddKeyboardMappingFile() {
	235	local mappath r included_list included_item i res ii sss
	236	mappath=$1
	237	KBDEPTH=$(($KBDEPTH+1))
	238	[ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
	239	if [ -e "$bigdir/$mappath" ] ; then
[2995]	240	LogFile "INFO: $mappath already added" >> $LOGFILE
[747]	241	return
	242	elif [ -d "$bigdir/$mappath" ] ; then
	243	echo "Cannot add $mappath: it's a directory. Sorry."
	244	return
	245	fi
[2995]	246	LogFile "INFO: Added kbd map $mappath" >> $LOGFILE
[747]	247	if [ ! -e "$mappath" ] ; then
[1764]	248	mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[747]	249	if [ ! -e "$mappath" ] ; then
[2963]	250	LogIt "WARNING: Cannot add $mappath: kbd map file not found"
[747]	251	return
	252	fi
	253	else
	254	echo -en "`basename $mappath \| tr '.' '#' \| sed s/#kmap#gz// \| sed s/#inc#gz//` " \| tr '#' '.'
	255	fi
	256
	257	mkdir -p $bigdir/etc
[2963]	258	tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log \| (cd "$bigdir" ; tar xf -) \|\| LogIt "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
[747]	259	if [ "`echo $mappath \| grep -F ".gz"`" ] ; then
[3023]	260	included_list=`gzip -dc $mappath \| grep -Fi include \| sed s/'"'//g \| cut -d' ' -f2`
[747]	261	else
[3023]	262	included_list=`grep -Fi include $mappath \| sed s/'"'//g \| cut -d' ' -f2`
[747]	263	fi
	264	for included_item in $included_list ; do
[925]	265	if [ ! -e "$included_item" ] ; then
[1764]	266	sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
	267	[ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
[925]	268	for ii in $sss ; do
[747]	269	[ -e "$ii" ] && AddKeyboardMappingFile $ii
[925]	270	done
	271	else
	272	AddKeyboardMappingFile $included_item
	273	fi
[747]	274	done
	275	}
	276
	277
	278	CopyDependenciesToDirectory() {
[3075]	279	local outdir incoming counter d found tdir
[747]	280	outdir=$1
	281	mkdir -p $outdir
	282	incoming=`ReadLine`
	283	counter=0
	284	while [ "$incoming" != "" ] ; do
[1526]	285	# Non absolute file names should not arrive till here => skipped
	286	if [ `echo "$incoming" \| cut -c1` != '/' ]; then
[2963]	287	LogIt "WARNING: Unable to handle $incoming"
[1526]	288	incoming=`ReadLine`
	289	continue
	290	fi
	291	# no parent directory of incoming should be a link, copy is not possible in that case
	292	d=`dirname "$incoming"`
	293	found="false"
	294	while [ $d != "/" -a $found = "false" ]; do
	295	[ -h "$d" ] && found="true"
	296	d=`dirname "$d"`
	297	done
[3075]	298	if [ -d "$incoming" ]; then
[747]	299	find $incoming/* -maxdepth 0 2> /dev/null \| CopyDependenciesToDirectory $outdir
[1526]	300	elif [ -e "$incoming" ] && [ $found = "false" ]; then
[3075]	301	if [ ! -h "$incoming" ]; then
	302	tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log \| (cd "$outdir" ; tar xf -) \|\| Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
	303	else
	304	tdir=`dirname "$incoming"`
	305	if [ ! -e "$outdir/$tdir" ]; then
	306	mkdir -p "$outdir/$tdir"
	307	fi
	308	cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
	309	fi
[1989]	310	# Only uncompress modules if not using udevd
	311	if [ "`echo "$incoming" \| grep "lib/modules/.\..o\.gz"`" != "" ] && [ "`ps auxww \| grep -v grep \| grep -qw udevd`" != "" ]; then
[2963]	312	gunzip -f $outdir/$incoming \|\| LogIt "WARNING: Cannot gunzip $outdir/$incoming"
[925]	313	fi
[3075]	314	[ -x "$outdir" ] && StripExecutable $outdir
[925]	315	counter=$(($counter+1))
	316	if [ "$counter" -ge "5" ] ; then
	317	counter=0
	318	echo -en "."
	319	fi
[747]	320	fi
	321	incoming=`ReadLine`
	322	done
	323	}
	324
	325
	326	CountItemsIn() {
	327	local r
	328	r=0
	329	for q in $1 ; do
	330	r=$(($r+1))
	331	done
	332	echo $r
	333	}
	334
	335
	336	DropOptimizedLibraries() {
	337	local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
	338	filelist=$1
	339	outdir=$2
	340
	341	list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
	342	if [ "$list_of_optimized_libraries" = "" ] ; then
[859]	343	return 0
[747]	344	fi
	345	echo -en "Dropping i686-optimized libraries if appropriate"
	346	for optimized_lib_name in $list_of_optimized_libraries ; do
[859]	347	echo -en "."
	348	reason=""
[1483]	349	vanilla_lib_name=`echo "$optimized_lib_name" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
[859]	350	echo "$vanilla_lib_name" >> $filelist
[2963]	351	LogFile "INFO: Adding $vanilla_lib_name to filelist"
[859]	352	mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
	353	rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
[2168]	354
	355	# This may return multiple files
	356	for resolved in `ReadAllLink $vanilla_lib_name`; do
[2963]	357	LogFile "INFO: Adding as deps $resolved to filelist"
[2168]	358	vanilla_resolved_name=`echo "$resolved" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
	359	mkdir -p $outdir$resolved> /dev/null 2> /dev/null
	360	rmdir $outdir$resolved > /dev/null 2> /dev/null
	361	ln -sf $vanilla_resolved_name $outdir$resolved
[2963]	362	LogFile "INFO: Excluding deps $resolved"
[2168]	363	grep -Fvx "$resolved" "$filelist" > $filelist.tmp
[2963]	364	LogFile "INFO: Replacing it with $vanilla_resolved_name"
[2168]	365	echo "$vanilla_resolved_name" >> $filelist.tmp
	366	mv -f $filelist.tmp $filelist
	367	done
[747]	368	done
[925]	369	$AWK '{ print $1; }' $filelist \| sort -u > $filelist.tmp
[747]	370	mv -f $filelist.tmp $filelist
	371	echo -e "$DONE"
	372	}
	373
	374
	375	FindAndAddUserKeyboardMappingFile() {
	376	local r res mapfile mappath included_item included_list keyfile mp locale
[2963]	377	LogIt "INFO: Analyzing your keyboard's configuration."
[747]	378	KEYDIR=/lib/kbd
	379	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
	380	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
	381	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
[1713]	382	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
	383	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
[747]	384	if [ ! -e "$KEYDIR" ] ; then
[2963]	385	LogIt "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
[747]	386	return 0
	387	fi
	388	if [ -e "/etc/sysconfig/keyboard" ] ; then
[2963]	389	LogFile "INFO: Red Hat-style config detected."
[747]	390	keyfile=/etc/sysconfig/keyboard
	391	elif [ -e "/etc/rc.d/rc.keymap" ] ; then
[2963]	392	LogFile "INFO: Slackware-style config detected."
[747]	393	keyfile=/etc/rc.d/rc.keymap
	394	elif [ -e "/etc/rc.config" ] ; then
[2963]	395	LogFile "INFO: Debian-style config detected."
[747]	396	keyfile=/etc/rc.config
	397	elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
[2963]	398	LogFile "INFO: Debian-style config detected."
[3014]	399	echo -en "INFO: Adding the following keyboard mapping tables: "
[747]	400	mkdir -p $bigdir/tmp
	401	echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
	402	KBDEPTH=0
	403	mkdir -p $bigdir/etc/console
[963]	404	cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
[2864]	405	echo ""
[747]	406	echo -e "$DONE"
	407	return 0
[2828]	408	elif [ -e "/etc/console-setup/boottime.kmap.gz" ] \|\| [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
[2963]	409	LogFile "INFO: Ubuntu-style config detected."
[3014]	410	echo -en "INFO: Adding the following keyboard mapping tables: "
[1713]	411	mkdir -p $bigdir/tmp
[2828]	412	if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
	413	kbdfile="/etc/console-setup/boottime.kmap.gz"
	414	else
	415	kbdfile="/etc/console-setup/cached.kmap.gz"
	416	fi
	417	echo $kbdfile > $bigdir/tmp/KEYMAP-LIVES-HERE
[1713]	418	KBDEPTH=0
	419	mkdir -p $bigdir/etc/console-setup
[2828]	420	cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
[2864]	421	echo ""
[1713]	422	echo -e "$DONE"
	423	return 0
[2744]	424	elif [ -e "/etc/rc.conf" ] ; then
[2963]	425	LogFile "INFO: ArchLinux config detected."
[2744]	426	keyfile=/etc/rc.conf
[1465]	427	elif [ -e "/etc/conf.d/keymaps" ] ; then
[2963]	428	LogFile "INFO: Gentoo-style config detected."
[1465]	429	keyfile=/etc/conf.d/keymaps
[747]	430	else
	431	echo -en "Searching for rc.config ..."
	432	keyfile=`find /etc -name rc.config \| head -n1`
	433	if [ "$keyfile" = "" ] \|\| [ ! -e "$keyfile" ] ; then
[2963]	434	LogIt "WARNING: Unknown config detected. Default keyboard map will be used."
[747]	435	return
	436	else
[2963]	437	LogFile "INFO: Found $keyfile"
[747]	438	fi
	439	fi
	440	if [ ! -e "$KEYDIR/keymaps" ] ; then
[2963]	441	LogIt "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
[747]	442	return
	443	fi
[2963]	444	LogFile "INFO: keyfile=$keyfile"
[2999]	445	# For SLES we need to remove the .map.gz extension Cf #614
	446	locale=`grep -F KEYTABLE "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2 \| sed 's/.map.gz$//'`
[747]	447	[ ! "$locale" ] && locale=`grep '.map$' "$keyfile" \| sed 's/^.* //'` # Slackware
[2999]	448	[ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2` # Gentoo & ArchLinux
[2963]	449	LogFile "INFO: locale=$locale"
[1764]	450	#
	451	# Process the keymaps dir once for all
	452	# AddKeyboardMappingFile will use it recursively
	453	#
	454	find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
	455	mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep -F "/${locale}." \| grep -vx " #."`
	456	[ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[747]	457	# If we have multiple keymaps then log it !!
	458	echo "$mp" \| grep -q " "
	459	if [ $? -eq 0 ]; then
[2963]	460	LogAll "WARNING: Multiple keymaps found: $mp"
	461	LogFile "INFO: The following one will be used"
[747]	462	fi
	463	for i in $mp ; do
	464	mappath=$i
	465	[ -e "$i" ] && [ ! -d "$i" ] && break
	466	done
	467	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[2958]	468	mappath=$(find / -wholename "/kbd/keymaps//$locale \| head -1")
[747]	469	fi
[2963]	470	LogFile "INFO: mappath = $mappath"
[747]	471	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[2963]	472	LogIt "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
[747]	473	return
	474	fi
[3014]	475	echo -en "INFO: Adding the following keyboard mapping tables: "
[747]	476	mkdir -p $bigdir/tmp
	477	echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
[2055]	478	KBDEPTH=0
[747]	479	AddKeyboardMappingFile $mappath
[2864]	480	echo ""
[747]	481	echo -e "$DONE"
[1764]	482	rm -f $MINDI_TMP/keymaps.find
[747]	483	return 0
	484	}
	485
	486
[2629]	487	FindMboot32Binary() {
	488	MBOOTC32=/usr/lib/syslinux/mboot.c32
	489	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/mboot.c32
	490	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
	491	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
	492	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
	493	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
	494	[ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 \| grep -x "/.*/mboot.c32"`
[2921]	495	[ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[2963]	496	LogFile "INFO: Found mboot.c32 at $MBOOTC32"
[2629]	497	}
	498
[747]	499	FindIsolinuxBinary() {
	500	ISOLINUX=/usr/lib/isolinux.bin
	501	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
[1491]	502	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
[747]	503	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
	504	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
[1491]	505	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
[1854]	506	[ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin \| grep -x "/.*/isolinux.bin"`
[2921]	507	[ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[2963]	508	LogFile "INFO: Found isolinux.bin at $ISOLINUX"
[747]	509	}
	510
	511
	512	FindSpecificModuleInPath() {
	513	local modpaths pwd line
	514	pwd=`pwd`
	515	if [ "$YOUR_KERNEL_SUCKS" ] ; then
[2712]	516	cd "$MINDI_TMP"
[747]	517	else
	518	cd /
	519	fi
	520	if [ ! -e "$1" ] ; then
[2995]	521	LogIt "WARNING: cannot search specific path '$1'"
[747]	522	return 1
	523	fi
[2553]	524	# Find all files and links (required for some VMWare VMs)
[3020]	525	modpaths=`find $1 -name $2.*o -o -name $2.o.gz -o -name $2.ko.gz -o -name $2.ko.xz -o -name $2 -type f -o -type l`
[747]	526	echo "$modpaths"
[2712]	527	cd "$pwd"
[747]	528	}
	529
	530
	531	GenerateGiantDependencyList() {
	532	local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
	533
	534	echo -en "Analyzing dependency requirements"
	535	outfile=$1
[940]	536	tempfile=$MINDI_TMP/$$.txt
[747]	537	incoming=`ReadLine`
	538
	539	> $tempfile
	540	progress=0
	541	res=0
	542	noof_lines=$2
	543	while [ "$incoming" != "" ] ; do
[861]	544	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	545	incoming=`ReadLine`
	546	continue
	547	fi
	548	if [ "$incoming" = "LVMFILES:" ] ; then
	549	break
	550	fi
[747]	551	filelist=`GenerateListForFile "$incoming"`
	552	r=$?
[2963]	553	[ "$r" -ne "0" ] && LogIt "WARNING: $incoming not found"
[747]	554	res=$(($res+$r))
[2963]	555	# LogFile "INFO: '$incoming' generates filelist '$filelist'"
[747]	556	for fname in $filelist ; do
[861]	557	[ "$fname" != "" ] && echo "$fname" >> $tempfile
[747]	558	done
	559	progress=$(($progress+1))
	560	echo -en "\r\t\t\t\t\t\t\t\t"
	561	i=$(($progress*100))
	562	i=$(($i/$noof_lines))
	563	echo -en "$i"
	564	echo -en "%"
	565	modres=$(($progress%4))
	566	[ "$modres" -eq "0" ] && echo -en "\t/"
	567	[ "$modres" -eq "1" ] && echo -en "\t-"
	568	[ "$modres" -eq "2" ] && echo -en "\t\\"
	569	[ "$modres" -eq "3" ] && echo -en "\t\|"
	570	incoming=`ReadLine`
	571	done
[861]	572	if [ "$incoming" = "LVMFILES:" ] ; then
	573	incoming=`ReadLine`
	574	lvmversion=""
	575	while [ "$incoming" != "" ] ; do
	576	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	577	incoming=`ReadLine`
	578	continue
	579	fi
	580	filelist=`GenerateListForFile "$incoming"`
	581	for tool in $filelist ; do
	582	lvmresolved=`readlink -f $tool`
[1342]	583	if [ "$tool" = "$lvmresolved" ]; then
[861]	584	echo "$tool" >> $tempfile
	585	elif echo "$lvmresolved" \| grep "lvmiopversion" &> /dev/null ; then
	586	if [ "$lvmversion" = "" ] ; then
	587	lvmversion=`$lvmresolved`
	588	echo "$lvmresolved" >> $tempfile
	589	fi
	590	toolstripped=`echo $tool \| $AWK -F / '{print $NF;}'`
[1342]	591	if [ "$lvmversion" = "200" ]; then
[861]	592	# pvdata and lvmcreate_initrd don't exist in LVM2
	593	case "$toolstripped" in
	594	"pvdata")
	595	continue
	596	;;
	597	"lvmcreate_initrd")
	598	continue
	599	;;
	600	esac
	601	fi
	602	toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
	603	if [ -e "$toolpath" ] ; then
	604	echo "$toolpath" >> $tempfile
	605	echo "$tool" >> $tempfile
	606	else
	607	toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
	608	fi
	609	if [ -e "$toolpath" ] ; then
	610	echo "$toolpath" >> $tempfile
	611	echo "$tool" >> $tempfile
	612	else
	613	echo "Where are your LVM-Tools? Couldn't find $tool"
	614	fi
	615	else
	616	echo "$tool" >> $tempfile
	617	fi
	618	done
	619	progress=$(($progress+1))
	620	echo -en "\r\t\t\t\t\t\t\t\t"
	621	i=$(($progress*100))
	622	i=$(($i/$noof_lines))
	623	echo -en "$i"
	624	echo -en "%"
	625	modres=$(($progress%4))
	626	[ "$modres" -eq "0" ] && echo -en "\t/"
	627	[ "$modres" -eq "1" ] && echo -en "\t-"
	628	[ "$modres" -eq "2" ] && echo -en "\t\\"
	629	[ "$modres" -eq "3" ] && echo -en "\t\|"
	630	incoming=`ReadLine`
	631	done
[747]	632	fi
	633	echo -en "$DONE\nMaking complete dependency list"
	634
	635	tr -s '/' '/' < $tempfile \| sort -u > $tempfile.new
	636	mv -f $tempfile.new $tempfile
	637	> $outfile.pre
	638	progress=0
	639	noof_lines=`cat $tempfile \| wc -l`
[2963]	640	LogFile "---------------------------------"
	641	LogFile "List of dependencies: "
	642	LogFile "---------------------------------"
[747]	643	for fname in `cat $tempfile` ; do
[1876]	644	echo "$fname" \| tee -a $LOGFILE >> $outfile.pre
	645	LocateDeps $fname \| tee -a $LOGFILE >> $outfile.pre
[925]	646	progress=$(($progress+1))
[747]	647	echo -en "\r\t\t\t\t\t\t\t\t"
	648	i=$(($progress*100))
	649	i=$(($i/$noof_lines))
	650	echo -en "$i"
	651	echo -en "%"
[925]	652	modres=$(($progress%4))
[747]	653	[ "$modres" -eq "0" ] && echo -en "\t/"
	654	[ "$modres" -eq "1" ] && echo -en "\t-"
	655	[ "$modres" -eq "2" ] && echo -en "\t\\"
	656	[ "$modres" -eq "3" ] && echo -en "\t\|"
	657	done
[1684]	658	if [ _"$MONDO_SHARE" != _"" ]; then
[925]	659	mkdir -p $bigdir/tmp
	660	mkdir -p $bigdir/sbin
	661	mkdir -p $bigdir/bin
[940]	662	if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
[2963]	663	LogIt "\nINFO: Incorporating post-nuke tarball"
[925]	664	old_pwd=`pwd`
[2712]	665	cd "$bigdir"
[2963]	666	tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log \|\| LogIt "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
[2712]	667	cd "$old_pwd"
[747]	668	fi
[963]	669	if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
[925]	670	LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
	671	else
[2963]	672	LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
	673	LogIt " I bet you've got a spare copy of Mondo or Mindi floating around on your system."
	674	LogIt " If Mindi was called by Mondo then send me a bug report."
	675	LogIt " It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
	676	LogIt " Finally, run Mindi again."
[925]	677	Die "Odd."
	678	fi
[2963]	679	cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE \|\| LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
[2380]	680	if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
[2963]	681	LogIt "\nINFO: Incorporating Network-related settings"
[2380]	682	for r in NETFS-* ISO-PREFIX ; do
[963]	683	cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE \|\| Die "Cannot copy $r - did you run out of disk space?"
[2963]	684	LogFile "INFO: Copying $r to ramdisk"
[925]	685	done
	686	fi
[747]	687	fi
[925]	688	tr ' ' '\n' < $outfile.pre \| tr -s '/' '/' \| grep -Fvx "" \| sort -u \| grep -Ev "/libX11\|/libXext\|/libXi\|/libgtk\|/libgdk" > $outfile
[747]	689	rm -f $tempfile $outfile.pre
	690	[ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" \|\| echo "\nFailed."
	691	return $res
	692	}
	693
	694
	695	GenerateListForFile() {
	696	local files_found loc fname incoming i res
	697	incoming="$1"
	698	files_found=""
	699	res=0
	700
	701	for fname in $incoming ; do
	702	files_found="$files_found `LocateFile $fname`"
	703	done
	704
	705	echo "$files_found" \| tr ' ' '\n' \| sort -u \| tr '\n' ' '
	706	}
	707
	708
	709	# Returns all disk devices which are part of a raid array
	710	GetAllRaidMembers() {
	711	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]device/ if(\$2) {print \$2}" < /etc/raidtab
	712	}
	713
	714
	715	GetFileSizeList() {
	716	local i
	717	for i in `find $1 -type d -o -print` ; do
	718	du -sk $i
	719	done
	720	}
	721
	722
	723	GetHomeDir() {
	724	local res loc
	725	loc=`which $1 2>/dev/null`
	726	res=`file $loc \| $AWK '{print $NF;}'`
	727	dirname $res
	728	}
	729
	730
[1230]	731	# Check kernel filesystem capabilites for accessing initrd image
[2429]	732	# Could be ext2 FS (old mode) or initramfs (new mode)
[1230]	733	#
	734	# Interface definition:
	735	# param #1: absolute path to kernel image
	736	GetInitrdFilesystemToUse() {
	737
	738	# interface test: make sure we have one parameter
	739	if [ $# -ne 1 ]; then
	740	Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
	741	fi
	742
	743	# interface parameters
	744	local lvKernelImage=$1
	745
	746	# local constants (filesystem magic strings)
	747	local lcMagicCramfs="<3>cramfs: wrong magic"
[2047]	748	local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
[2390]	749	local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
[2311]	750	local lcMagicInitfs="<6>checking if image is initramfs...\|<6>Unpacking initramfs...\|<6>Trying to unpack rootfs image as
	751	initramfs"
[1230]	752
	753	# local variables
	754	local lvOffset
	755	local lvScanRes
	756	local lvUseFilesystem
	757
	758	# say where we are.
[2963]	759	LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
[1230]	760
	761	# verify that file exists
	762	[ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
	763
[1566]	764	# Kernel may be gzip compressed
[1730]	765	file $lvKernelImage 2>&1 \| grep -q gzip
[1566]	766	if [ $? -eq 0 ]; then
[2390]	767	lvScanRes=`gzip -cd $lvKernelImage \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs"`
[2429]	768
	769	# determine which filesystem to use for initrd image: ext2\|3fs, gzip'ed cpio (initramfs) or cramfs
	770	if [ `echo $lvScanRes \| grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
	771	lvUseFilesystem="ext2fs"
	772	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
	773	lvUseFilesystem="ext3fs"
	774	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
	775	lvUseFilesystem="initramfs"
	776	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
	777	lvUseFilesystem="cramfs"
[2393]	778	else
[2429]	779	lvUseFilesystem="UNSUPPORTED"
[2393]	780	fi
	781
[2429]	782	else
	783	# In that case, we are after 2.6.30 and use the supported initramfs
[1230]	784	lvUseFilesystem="initramfs"
	785	fi
	786	# say what we are using
[2963]	787	LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
[1230]	788
	789	# return file system to use
	790	echo "$lvUseFilesystem"
	791
	792	}
	793
[747]	794	# Searches parent raid device of given disk device
	795	# $1: disk device (i.e. /dev/hda1)
	796	GetParentRaidDev() {
[2917]	797	if [ ! -f /etc/raidtab ]; then
	798	return
	799	fi
[747]	800	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {dev=\$2} /^[[:space:]]*device/ {if(\$2==\"$1\") {print dev; exit}}" < /etc/raidtab
	801	}
	802
	803
	804	# Searches members of raid device
	805	# $1: raid device (/dev/md...)
	806	GetRaidDevMembers() {
[2917]	807	if [ ! -f /etc/raidtab ]; then
	808	return
	809	fi
[747]	810	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
	811	}
	812
	813
	814	HackPathsToFailsafe() {
[2292]	815	local incoming newpath stub i pwd
[747]	816	incoming=`ReadLine`
	817	pwd=`pwd`
[2712]	818	cd "$MINDI_TMP"
[747]	819	while [ "$incoming" != "" ] ; do
[925]	820	stub=`basename $incoming`
	821	newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
	822	for i in $newpath ; do
	823	echo "$i"
	824	done
	825	read incoming
[747]	826	done
[2712]	827	cd "$pwd"
[747]	828	}
	829
	830
	831	ListAllPartitions() {
	832	local res currline partition all_partitions ap_orig remaining i j
	833
[2070]	834	grep -Evx " #.\| none." $MY_FSTAB \| $AWK '/^\/dev\/[imhs]d\|\|^LABEL=\/\|^UUID=/ && !/\/fdd\|\/cdr\|\/zip\|\/floppy/ {print $1}'
[747]	835	[ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
[1824]	836	if [ -e "/vmfs/volumes" ]; then
	837	# For VMWare ESX 3 get the device names of these volumes
[2431]	838	vdf -P \| grep -E '/vmfs/volumes' \| $AWK '{print $1}'
[1824]	839	fi
[747]	840	return
	841	}
	842
	843
	844	ListImagesForUser() {
	845	local path fname
[1983]	846	path=$MINDI_CACHE
[747]	847	echo -en "In the directory '$path' you will find the images:-\n"
	848	for fname in `ls $path \| grep -F mindi-` ; do
	849	printf "%19s " $fname
	850	done
	851	echo " "
	852	}
	853
	854
	855	ListKernelModulePaths() {
[2583]	856	local module_list module fname r kern
[1399]	857	module_list="$MODULES"
[1230]	858	# Remove unwanted modules from list
	859	for i in $DENY_MODS; do
	860	module_list=`echo ${module_list} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
[1726]	861	EXTRA_MODS=`echo ${EXTRA_MODS} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
[1230]	862	done
[747]	863	###
	864	### Sq-Modification ... Use kernelname for module search path if specified
	865	###
	866	if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
	867	then
	868	kern=${kernelname}
	869	else
[2292]	870	kern="$KERVERRUN"
[747]	871	fi
[2292]	872	export KERVER=$kern
[747]	873	###
	874	### Sq-Mod End
	875	###
[2471]	876	# Get rid of duplicates, so that if a live kernel module also appears
	877	# in $EXTRA_MODS that it won't get reported as "live module file not found" twice.
	878	for module in `echo $module_list $EXTRA_MODS \| tr ' ' '\n' \| sort -u` ; do
[747]	879	r=`find /lib/modules/$kern -type f \| grep "/${module}\..*o" \| tail -n1`
[2471]	880	if [ -z "$r" ]; then
	881	if [ "`echo "$MODULES" \| grep -w $module`" ]; then
	882	r="[live module file not found]"
	883	else
	884	r="[extra module file not found]"
	885	fi
[2583]	886	else
	887	[ -f "$r" ] && echo "$r"
[2471]	888	fi
[2963]	889	LogFile "INFO: module $module --> $r"
[747]	890	done
	891	find /lib/modules/$kern/modules.* -type f 2> /dev/null
	892	}
	893
[1784]	894	#
	895	# Critical function which computes all dependencies (dyn. lib.)
	896	# for a list of binaries
	897	#
[747]	898	LocateDeps() {
	899	local incoming fname deps
[1724]	900	incoming="$*"
[747]	901	for fname in $incoming ; do
	902	if [ ! -e "$fname" ] ; then
[2995]	903	LogFile "WARNING: $fname does not exist; cannot be LDD'd."
[747]	904	if echo $fname \| grep lvm &> /dev/null ; then
[2963]	905	LogFile " This warning only affects you if you are using LVM."
[1399]	906	if echo "$MODULES" \| grep lvm &> /dev/null ; then
[2963]	907	LogFile " I think you are, so please take heed!"
[747]	908	else
[2963]	909	LogFile " I don't think you are, so don't worry about it."
[747]	910	fi
	911	fi
	912	elif [ -h "$fname" ] && [ -x "$fname" ] ; then
[2963]	913	LogFile "INFO: $fname is softlink"
[747]	914	else
[1526]	915	ldd $fname 2> /dev/null \| ProcessLDD
[747]	916	fi
	917	done
	918	}
	919
[925]	920
[860]	921	# Give all symlinks recursively of a full path name
	922	ReadAllLink() {
	923	file="$1"
[747]	924
[2174]	925	echo $file \| grep -q '\.\./'
[2175]	926	if [ $? -eq 0 ]; then
[2174]	927	# We need to normalise the path with .. in it
	928	file=`echo $file \| perl -pi -e 's\|([^/]+)/([^/]+)/\.\./([^/]+)\|$1/$3\|'`
	929	fi
[1883]	930	echo "$file"
[860]	931	if [ ! -h $file ]; then
	932	return 0
	933	fi
[747]	934
[1883]	935	link=`readlink $file`
[862]	936	d=`dirname $file`
[1883]	937	fchar=`echo $link \| cut -c1`
	938	# If mother dir is a link print it
[1230]	939	if [ -h "$d" ]; then
[1784]	940	echo "$d"
[1883]	941	d=`readlink $d`
	942	fi
	943	if [ "$fchar" != "/" ]; then
	944	# Relative or local link
	945	ReadAllLink "$d/$link"
[860]	946	else
[1883]	947	# Absolute path
	948	ReadAllLink $link
[1230]	949	fi
[860]	950	}
	951
[925]	952
[747]	953	LocateFile() {
	954	local i path fname_to_find location output resolved tmp stub cache_id loclist
	955	fname_to_find="$1"
[1526]	956	# It's an absolute path
[747]	957	if echo "$fname_to_find" \| grep -x "/.*" ; then
[859]	958	output="$fname_to_find"
[860]	959	if [ -h "$output" ] ; then
	960	output="`ReadAllLink $output` $output"
	961	fi
[859]	962	echo "$output"
	963	return 0
[747]	964	fi
[1526]	965	# It's not an absolute path
[747]	966	output=""
[1526]	967	for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
	968	#for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
	969	[ -h "$path" ] && continue
	970	[ ! -e "$path/$fname_to_find" ] && continue
	971	output="$path/$fname_to_find $output"
	972	if [ -h "$path/$fname_to_find" ] ; then
	973	output="`ReadAllLink $path/$fname_to_find` $output"
	974	fi
[747]	975	done
	976	if [ "$output" = "" ] ; then
[860]	977	return 1
[747]	978	fi
	979	echo "$output"
	980	return 0
	981	}
	982
	983
	984	# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
	985	MakeMondoConfigFile() {
	986	local outfile use_lzo use_comp use_star
	987	outfile=$1
	988	> $outfile
	989	[ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
	990	[ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
[1698]	991	[ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
[747]	992	[ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
	993	[ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
	994	[ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
	995	use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
[998]	996	use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
[747]	997	use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
	998	use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
	999	echo "use-lzo $use_lzo" >> $outfile
[998]	1000	echo "use-gzip $use_gzip" >> $outfile
[747]	1001	echo "use-star $use_star" >> $outfile
	1002	echo "use-comp $use_comp" >> $outfile
	1003	echo "datestamp `date`" >> $outfile
	1004	[ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
[2380]	1005	AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-IPADDR netfs-client-ipaddr $outfile
	1006	AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-NETMASK netfs-client-netmask $outfile
	1007	AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-BROADCAST netfs-client-broadcast $outfile
[2887]	1008	AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-HWADDR netfs-client-hwaddr $outfile
[2380]	1009	AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-DEFGW netfs-client-defgw $outfile
	1010	AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-MOUNT netfs-server-mount $outfile
[2847]	1011	AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-USER netfs-server-user $outfile
[2380]	1012	AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-PATH netfs-server-path $outfile
	1013	AddFileToCfgIfExists $MINDI_TMP/NETFS-DEV netfs-dev $outfile
	1014	AddFileToCfgIfExists $MINDI_TMP/NETFS-PROTO netfs-proto $outfile
	1015	AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-IPADDR netfs-server-ipaddr $outfile
[940]	1016	AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
	1017	AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
	1018	AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
	1019	AddFileToCfgIfExists $MINDI_TMP/ISODIR isodir $outfile
	1020	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
	1021	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
[2985]	1022	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER bootloader.ver $outfile
[940]	1023	AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
	1024	AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
	1025	AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
	1026	AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
[949]	1027	AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
	1028	AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
[1948]	1029	AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
[747]	1030	}
	1031
[2618]	1032	# Get PV's for an LV
	1033	GetPVsForLV() {
	1034	if [ -n "$1" ]; then
	1035	vg=`$LVMCMD lvdisplay $1 2>/dev/null \|awk '/VG Name/{print $NF;exit}'`
	1036	if [ -z "$vg" ]; then
	1037	return
	1038	fi
	1039	$LVMCMD vgdisplay -v $vg 2>/dev/null \| awk '/PV Name/{print $NF}'
	1040	fi
	1041	}
[747]	1042
[2618]	1043
[747]	1044	MakeMountlist() {
[2907]	1045	local mountlist all_partitions current_partition \
[747]	1046	partition_size partition_format outstring partition_number \
	1047	partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
[2013]	1048	absolute_partition old_partition_fmt current_lvolume uname skip
[747]	1049
[2963]	1050	LogFile "Your raw fstab file looks like this:"
	1051	LogFile "------------------------------------"
[747]	1052	cat $MY_FSTAB >> $LOGFILE
[2963]	1053	LogAll "Your mountlist will look like this:"
	1054	LogFile "-----------------------------------"
[747]	1055
[2907]	1056	# mountlist(OUT)
[747]	1057	mountlist=$1
	1058
	1059	# NB: partition = device
	1060	# NB: mountpt = where the device is mounted
	1061
	1062	[ -e "$MY_FSTAB" ] \|\| Die "Cannot find your fstab file ($MY_FSTAB)"
	1063
[1684]	1064	[ "$mountlist" != "" ] && rm -Rf $mountlist
[747]	1065	> $mountlist
	1066	all_partitions=""
	1067
	1068	if [ $LVM != "false" ]; then
[1885]	1069	echo -en "Analyzing LVM...\n"
[968]	1070	$MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
[971]	1071	if [ $? -ne 0 ]; then
[963]	1072	LVM="false"
	1073	fi
[2536]	1074	# Excluded LVs and GVs are not reported here
[2424]	1075	all_partitions=`cat $MINDI_TMP/lvm.res \| grep -F ">>>" \| cut -d' ' -f2-`
[747]	1076	fi
	1077	all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
	1078	for i in $IMAGE_DEVS ; do
	1079	mount \| grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
	1080	done
	1081	[ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" \| tr ' ' '\n' \| sort -u \| tr '\n ' ' '`"
[2951]	1082	printf " %-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE (MB)" LABEL/UUID \| tee -a $LOGFILE
[3028]	1083	useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
[747]	1084	for c_p in $all_partitions ; do
[2917]	1085	# Skip fd/cd devices, network FS, cifs
[2452]	1086	[ "`echo "$useless_dev" \| grep -F "$c_p"`" != "" ] \|\| [ "`echo "$c_p" \| grep ":"`" != "" ] \|\| [ "`echo "$c_p" \| grep -E "^//"`" != "" ]&& continue
[747]	1087	[ "`echo "$c_p" \| grep -x "/dev/cdroms.*"`" ] && continue
	1088	if [ -h "$c_p" ] && [ "`echo "$c_p" \| grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/md"`" = "" ] ; then
[861]	1089	current_partition=`readlink -f $c_p`
[3046]	1090	if [ "`echo "$current_partition" \| grep -F "/dev/mapper"`" != "" ]; then
	1091	current_partition="$c_p"
	1092	elif [ "`echo $current_partition \| grep -E '^/dev/dm-'`" ]; then
[3059]	1093	# For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
[3066]	1094	current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
[3046]	1095	fi
[747]	1096	[ "`echo "$useless_dev" \| grep -F "$current_partition"`" ] && continue
	1097	else
	1098	current_partition="$c_p"
	1099	fi
	1100	[ "$c_p" = "none" ] && continue
	1101	redhat_label=""
[1831]	1102	label=""
[957]	1103	uuid=""
[861]	1104	absolute_partition=`readlink -f $c_p`
[2965]	1105	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$current_partition" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[747]	1106
	1107	# Detects noauto partitions not mounted and exclude them
[2965]	1108	partition_option=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$current_partition" \| grep -vx " #." \| $AWK '{print $4}' \| head -n1`
[747]	1109	if [ "`echo "$partition_option" \| grep -i noauto`" != "" ] && [ "`mount \| grep -w "$partition_mountpt"`" = "" ] ; then
[3026]	1110	LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
[747]	1111	continue
	1112	fi
[3026]	1113	# Detects bind partitions and exclude them
	1114	if [ "`echo "$partition_option" \| grep -iw bind`" != "" ]; then
	1115	LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
	1116	continue
	1117	fi
[747]	1118
[1986]	1119	# set default in case we dont't find it
	1120	str_to_find_fmt_with=$current_partition
	1121
[747]	1122	# This part tries to retrieve the correct device from a LABEL line in /etc/fstab
	1123	# current_partition contains only first column of /etc/fstab
[2965]	1124	if [ "`echo "$current_partition" \| grep -i "LABEL="`" != "" ]; then
[980]	1125	redhat_label=`echo "$current_partition" \| cut -d'=' -f2`
[747]	1126	actual_dev=""
[853]	1127
	1128	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1129	if [ -x "/sbin/findfs" ]; then
[2847]	1130	actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
[853]	1131	fi
[747]	1132
[853]	1133	# 2nd try : blkid, the good way for all LABEL except swap
	1134	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[2965]	1135	actual_dev=`/sbin/blkid \| grep "$redhat_label" \| grep LABEL= \| cut -d':' -f1`
[747]	1136	# For LVM FS it will give a /dev/dm-# which should then be converted
[748]	1137	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1138	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1139	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[747]	1140	for dev in `ls /dev/mapper/*`; do
[963]	1141	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1142	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[747]	1143	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1144	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[747]	1145	break
	1146	fi
	1147	done
	1148	fi
	1149	fi
	1150
[853]	1151	# 3rd try, which works on a standard partition (ext2/3), but not on swap
[747]	1152	# For LVM gives a /dev/mapper entry
	1153	if [ "x$actual_dev" = "x" ]; then
[2965]	1154	actual_dev=`/bin/mount -l \| grep "\[$redhat_label\]" \| cut -d' ' -f1`
[747]	1155	fi
	1156
[853]	1157	# 4th try, with vol_id
[747]	1158	# SWAP only
	1159	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[2965]	1160	list_swaps=`cat /proc/swaps \| grep "/dev/" \| $AWK '{ print $1 }' `
[747]	1161	for dev_swap in $list_swaps ; do
[2965]	1162	dev_exists=`/sbin/vol_id $dev_swap \| grep "$redhat_label"`
[747]	1163	if [ "x$dev_exists" != "x" ]; then
	1164	actual_dev=$dev_swap
	1165	break;
	1166	fi
	1167	done
	1168	fi
	1169
[853]	1170	# 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
[789]	1171	# LABEL=SW-cciss/c0d0p3 (RDP)
[853]	1172	# or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
[747]	1173	# SWAP only
[2965]	1174	if [ "x$actual_dev" = "x" -a _"`echo $current_partition \| grep -iE 'LABEL=SWAP\|LABEL=SW-'`" != _"" ]; then
[2013]	1175	skip=""
[2292]	1176	uname=$KERVERRUN
[2013]	1177	[ "`echo $uname \| grep "2.4.[0-9]"`" != "" ] && skip=16
	1178	# 2.6.12 needs 16 (FC3)
	1179	[ "`echo $uname \| grep "2.6.[0-1]"`" != "" ] && skip=16
	1180	# 2.6.19 and upper needs 1052
	1181	[ "`echo $uname \| grep "2.6.19"`" != "" ] && skip=1052
	1182	[ "`echo $uname \| grep "2.6.[2-9]"`" != "" ] && skip=1052
[2892]	1183	[ "`echo $uname \| grep "3.[0-9].[0-9]"`" != "" ] && skip=1052
[2013]	1184	if [ $skip = "" ]; then
	1185	Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
	1186	fi
[853]	1187	for try_dev in `tail +2 /proc/swaps \| cut -d' ' -f1`
	1188	do
	1189	# Location of the swap label for kernel 2.6
[2013]	1190	try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
[853]	1191	if [ "x$try_dev_label" = "x$redhat_label" ]; then
[855]	1192	actual_dev=$try_dev
[853]	1193	fi
	1194	done
[747]	1195	fi
[1008]	1196
	1197	# Check if one of all those tries has known success
	1198	if [ "x$actual_dev" != "x" ]; then
	1199	current_partition=$actual_dev
	1200	else
[1885]	1201	Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
[1008]	1202	fi
[957]	1203	# This part tries to retrieve the correct device from a UUID line in /etc/fstab
	1204	# current_partition contains only first column of /etc/fstab
[2965]	1205	elif [ "`echo "$current_partition" \| grep -i "UUID="`" != "" ]; then
[980]	1206	uuid=`echo "$current_partition" \| cut -d'=' -f2`
[957]	1207	actual_dev=""
	1208
	1209	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1210	if [ -x "/sbin/findfs" ]; then
	1211	actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
	1212	fi
	1213
[1531]	1214	# 2nd try : blkid, the good way for all UUID except swap
[957]	1215	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[2965]	1216	actual_dev=`/sbin/blkid \| grep "$uuid" \| grep UUID= \| cut -d':' -f1`
[957]	1217	# For LVM FS it will give a /dev/dm-# which should then be converted
	1218	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1219	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1220	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[957]	1221	for dev in `ls /dev/mapper/*`; do
[963]	1222	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1223	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[957]	1224	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1225	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[957]	1226	break
	1227	fi
	1228	done
	1229	fi
	1230	fi
	1231
	1232	# 3th try, with vol_id
	1233	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[2965]	1234	list_dev=`mount \| grep -E '^/' \| $AWK '{ print $1 }' `
[957]	1235	for dev in $list_dev ; do
[2965]	1236	dev_exists=`/sbin/vol_id $dev \| grep "$uuid"`
[957]	1237	if [ "x$dev_exists" != "x" ]; then
	1238	actual_dev=$dev
	1239	break;
	1240	fi
	1241	done
	1242	fi
	1243
[1531]	1244	# 4th try, with dumpuuid (VMWare only ?) for swap
	1245	if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
[2965]	1246	list_dev=`cat /proc/swaps \| grep -E '^/' \| $AWK '{ print $1 }' `
[1531]	1247	for dev in $list_dev ; do
[2965]	1248	dev_exists=`/sbin/dumpuuid $dev \| grep "$uuid"`
[1531]	1249	if [ "x$dev_exists" != "x" ]; then
	1250	actual_dev=$dev
	1251	break;
	1252	fi
	1253	done
	1254	fi
	1255
[747]	1256	# Check if one of all those tries has known success
	1257	if [ "x$actual_dev" != "x" ]; then
	1258	current_partition=$actual_dev
	1259	else
[2069]	1260	Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs\|blkid\|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
[747]	1261	fi
	1262	else
[1863]	1263	# Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
	1264	# they use symlinks in fstab unrelated to what is shown in mount !
	1265	if [ _"$partition_mountpt" = _"" ]; then
[1986]	1266	# set default in case we dont't find it
[2965]	1267	for tmpp in `tr -s '\t' ' ' < $MY_FSTAB \| grep -Ev "^#" \| $AWK '{print $1}'`; do
[1864]	1268	if [ _"`readlink -f $tmpp`" = _"$current_partition" ]; then
[1863]	1269	str_to_find_fmt_with=$tmpp
[2965]	1270	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$tmpp" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[1864]	1271	break;
[1863]	1272	fi
	1273	done
	1274	fi
[747]	1275	fi
	1276
[2566]	1277	# Look for devices which have to be excluded
	1278	skip=0
	1279	if [ "$MINDI_EXCLUDE_DEVS" ] ; then
[2568]	1280	l=""
	1281	list_of_devices="`ReadAllLink $current_partition`"
	1282	for d in $list_of_devices; do
[2579]	1283	l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
[2568]	1284	done
[2618]	1285
	1286	# Remove PVs from LVs excluded
	1287	l="$l `GetPVsForLV $current_partition`"
	1288
	1289	# We want a single unique list
[2568]	1290	list_of_devices="`echo $l \| sort -u`"
[2618]	1291
[2854]	1292	for d in `echo $MINDI_EXCLUDE_DEVS \| sed 's/\|/ /g'`; do
[2568]	1293	if [ "`echo " $list_of_devices " \| grep " $d"`" != "" ]; then
[2963]	1294	LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
[2566]	1295	skip=1
	1296	continue
	1297	fi
	1298	done
	1299	fi
	1300	if [ $skip -eq 1 ]; then
	1301	continue
	1302	fi
	1303
[747]	1304	partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
[3028]	1305	# Detects iso9660 ISO images and exclude them
	1306	if [ "`echo "$partition_format" \| grep -iw iso9660`" != "" ]; then
[3064]	1307	LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
[3028]	1308	continue
	1309	fi
[747]	1310	# Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
	1311	# for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
	1312	# the former is then a link to the latter, so we test whether
	1313	# $current_partition is actually such a link or not and set
[755]	1314	# $current_lvolume accordingly. On Debian you may find more than one answer
	1315	# so we remove the one corresponding to /dev/.static
	1316	# On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
	1317	# principle is the same and we need to find the link to it as well.
	1318	# Note that $current_lvolume may well be an
[747]	1319	# ordinary device. It is just to make sure that we feed the right value
	1320	# into any of the LVM tools if possible.
	1321
[3064]	1322	current_lvolume="$current_partition"
[763]	1323	if [ $LVM = "v2" ] && [ "`echo $current_partition \| grep -E '^/dev/mapper/'`" ]; then
[755]	1324	# .static dir are a Debian specificity
[763]	1325	current_lvolume="`find /dev -lname "$current_partition" \| grep -Ev '^/dev/\.static/'`"
[755]	1326	echo $current_lvolume \| grep -q ' '
[784]	1327	if [ $? -eq 0 ]; then
[2963]	1328	LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
[755]	1329	fi
[2072]	1330	# if it's not found, it may well be a real device such as a multipath one
	1331	# /dev/mapper/mpath... Thus we revert the situation so that next test succeed
	1332	if [ _"$current_lvolume" = _"" ]; then
	1333	current_lvolume="$current_partition"
	1334	fi
[747]	1335	fi
	1336	#
	1337	# End of LVM device style variation code (other than $current_lvolume).
	1338
[745]	1339	if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
	1340	# Size computed via LVM not directly
[747]	1341	partition_size="lvm"
	1342	else
	1343	[ "`echo "$current_partition" \| grep "[0-9]"`" = "" ] && continue
	1344	[ "`echo "$current_partition" \| grep -c "^/"`" -ne "1" ] && continue
	1345	if [ "$partition_format" = "swap" ] \|\| [ "$partition_mountpt" = "swap" ] ; then
[2947]	1346	# Skip swap files
	1347	[ "`echo "$current_partition" \| grep -E "^/dev"`" = "" ] && continue
[2919]	1348	partition_size=`grep -Fv "Priority" /proc/swaps \| tr -s '\t' ' ' \| grep -F "$current_partition " \| $AWK '{print $3}'`
[747]	1349	[ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
	1350	[ "$partition_format" != "swap" ] && partition_format="swap"
	1351	if [ "$partition_size" = "" ] ; then
	1352	totalsize=0
	1353	items=0
	1354	for i in `tr -s ' ' '\t' < /proc/swaps \| grep -Fv "Filename" \| cut -f3` ; do
	1355	totalsize=$(($totalsize+$i))
	1356	items=$(($items+1))
	1357	done
	1358	[ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) \|\| partition_size=0
	1359	[ "$partition_size" -lt "125000" ] && partition_size=125000
[2963]	1360	LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
[747]	1361	fi
[2947]	1362	else
	1363	partition_size=`SizeOfPartition $current_partition`
[747]	1364	fi
	1365	fi
	1366	[ "$partition_mountpt" = "swap" ] && partition_format="swap"
	1367	[ "$partition_format" = "swap" ] && partition_mountpt="swap"
	1368	if [ "$partition_mountpt" = "" ] ; then
	1369	if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
	1370	if [ "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
	1371	partition_mountpt="raid"
	1372	partition_format="raid"
	1373	else
	1374	partition_mountpt="lvm"
	1375	partition_format="lvm"
	1376	fi
	1377	fi
	1378	fi
	1379	psz=$partition_size
[2963]	1380	LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
[747]	1381	[ "$psz" != "lvm" ] && psz=$(($psz/1024))
	1382	if [ "`echo " $IMAGE_DEVS " \| grep -F " $current_partition "`" != "" ] ; then
	1383	partition_mountpt="image"
	1384	old_partition_fmt=$partition_format
	1385	partition_format="`$FDISK -l 2>> $LOGFILE \| tr '*' ' ' \| tr '+' ' ' \| tr -s ' ' '\t' \| grep -w "$absolute_partition" \| cut -f5`"
	1386	partition_size=$(($partition_size+1)); # just in case
	1387	if [ "$partition_format" = "Linux" ] ; then
[2963]	1388	LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
	1389	LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
[747]	1390	partition_format=$old_partition_fmt
	1391	fi
	1392	fi
[2566]	1393
[747]	1394	if [ ! "$partition_mountpt" ] ; then
[2963]	1395	LogFile "------- $FDISK -l $qq log ------------"
[1883]	1396	for qq in "" `find /dev/ida/cd ! -name 'p' 2> /dev/null`; do
[747]	1397	partition_format=`$FDISK -l $qq 2>> $LOGFILE \| grep -w "$c_p" \| sed 's/12/\|/' \| tr -s '\t' ' ' \| cut -d'\|' -f2 \| cut -d' ' -f2-9`
	1398	[ "$partition_format" ] && break
	1399	done
[2963]	1400	LogFile "------- $FDISK log end ------------"
[747]	1401	if [ "$partition_format" = "Compaq diagnostics" ] ; then
	1402	partition_format="compaq"
	1403	elif [ ! "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
[2963]	1404	LogIt "WARNING: Unable to find mountpoint of $current_partition - ignoring"
[747]	1405	continue
	1406	fi
	1407	fi
[1755]	1408	if [ "$redhat_label" ]; then
	1409	label="$redhat_label"
[1756]	1410	elif [ "$uuid" ]; then
[1755]	1411	label="$uuid"
	1412	fi
[747]	1413	partition_format="`echo "$partition_format" \| cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
[963]	1414	[ "$partition_format" = "auto" ] && partition_format="`mount \| grep -w $current_partition \| $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
[1755]	1415	unofficial_outstring=`printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
[747]	1416	if [ "$current_partition" = "" ] ; then
[2963]	1417	LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
[747]	1418	elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
	1419	if [ "`grep -F device /etc/raidtab 2>/dev/null \| grep -F $current_partition`" ] ; then
	1420	partition_mountpt=raid
	1421	partition_format=raid
[1755]	1422	printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
	1423	printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1424	else
[2963]	1425	LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
[747]	1426	fi
	1427	elif [ "$partition_format" = "" ] ; then
[2963]	1428	LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
[747]	1429	elif [ "$partition_size" = "" ] ; then
[2963]	1430	LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
[747]	1431	elif [ "$partition_mountpt" = "/proc" ] \|\| [ "$partition_mountpt" = "/dev/pts" ] ; then
	1432	continue
	1433	else
	1434	if [ "$partition_format" = "dos" ] \|\| [ "$partition_format" = "msdos" ] ; then
[2963]	1435	LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
[747]	1436	partition_format="vfat"
	1437	fi
[1755]	1438	printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
	1439	printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1440	fi
	1441	done
	1442	}
	1443
[2432]	1444	CheckMountlist() {
	1445	local file=$1
	1446	# Coherency verification
[2529]	1447	ML01=`cat $file \| wc -l`
[2995]	1448	ML02=`grep -vE ' lvm \| raid \| swap ' $file \| wc -l`
[2432]	1449	ML1=`$AWK '{print $1}' $file \| sort -u \| wc -l`
[3024]	1450	ML2=`grep -vE ' lvm \| raid \| swap ' $file \| $AWK '{print $2}' \| sort -u \| wc -l`
[2529]	1451	if [ "$ML01" -ne "$ML1" ]; then
[2963]	1452	LogFile "--------------------------------------------"
	1453	LagAll "WARNING: Duplicate device entry in mountlist"
	1454	LogFile "--------------------------------------------"
[2432]	1455	fi
[2529]	1456	if [ "$ML02" -ne "$ML2" ]; then
[2963]	1457	LogFile "--------------------------------------------"
	1458	LogAll "WARNING: Duplicate mountpoint entry in mountlist"
	1459	LogFile "------------------------------------------------"
[2432]	1460	fi
	1461	}
[747]	1462
	1463	MakeSureNumberIsInteger() {
	1464	res=`echo "$1" \| tr -s '\-[0-9]' ' '`
	1465	if [ "$res" != " " ] && [ "$res" != "" ] ; then
	1466	echo "result = '$res'"
	1467	Die "$1 should be an integer"
	1468	fi
	1469	}
	1470
	1471
	1472	OfferToMakeBootableISO() {
	1473	local i old_pwd
[2457]	1474	if [ -z "$ISO_CMD" ]; then
[2963]	1475	LogIt "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
[2457]	1476	return
	1477	fi
[1684]	1478	if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
[966]	1479	echo -en "Shall I make a bootable CD image? (y/[n]) "
[747]	1480	read i
	1481	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1482	fi
[940]	1483	rm -Rf $MINDI_TMP/iso
[1983]	1484	mkdir -p $MINDI_TMP/iso/{images,archives}
[2963]	1485	cp -f $MINDI_CACHE/{.gz,.img} $MINDI_TMP/iso/images 2>> $LOGFILE \|\| LogIt "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
	1486	LogFile "INFO: mindi_lib = $MINDI_LIB"
[747]	1487	for i in memdisk memtest.bin memtest.img ; do
[953]	1488	j=$MINDI_LIB/$i
[1983]	1489	k=$MINDI_TMP/iso
[953]	1490	if [ -e "$j" ] ; then
[2963]	1491	LogIt "INFO: Copying $j to $k"
[2092]	1492	cp -f $j $k 2>> $LOGFILE \|\| Die "Failed to copy $j to $k"
	1493	cp -f $j $MINDI_TMP 2>> $LOGFILE \|\| Die "Failed to copy $j to $MINDI_TMP"
[1885]	1494	if [ _"$MONDO_SHARE" != _"" ]; then
	1495	cp -f $j $MONDO_ROOT 2>> $LOGFILE \|\| Die "Failed to copy $j to $MONDO_ROOT"
	1496	fi
[953]	1497	fi
[747]	1498	done
[2948]	1499	MakeMessageFile \| cut -c1-80 > $MINDI_TMP/iso/message.txt
[2629]	1500	if [ $KERNEL_IS_XEN = "yes" ]; then
	1501	cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE \|\| Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
	1502	cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32 2>> $LOGFILE \|\| Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
	1503	fi
[2681]	1504	cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE \|\| Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
	1505	cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE \|\| Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
[2629]	1506
[1885]	1507	if [ _"$MONDO_SHARE" != _"" ]; then
[2681]	1508	if [ $KERNEL_IS_XEN = "yes" ]; then
	1509	cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE \|\| Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
	1510	cp $MBOOTC32 $MONDO_ROOT/mboot.c32 2>> $LOGFILE \|\| Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
	1511	fi
[1929]	1512	cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE \|\| Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
[1983]	1513	cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE \|\| Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
[1885]	1514	fi
[2073]	1515	MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
[747]	1516	if [ "$ARCH" != "ia64" ] ; then
[2092]	1517	cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE \|\| Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
[747]	1518	fi
[1983]	1519	old_pwd=`pwd`
[2712]	1520	cd "$MINDI_TMP/iso"
[747]	1521	if [ "$ARCH" != "ia64" ] ; then
[1885]	1522	if [ _"$MONDO_SHARE" != _"" ]; then
[2681]	1523	cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt} $MONDO_ROOT 2>> $LOGFILE \|\| Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
	1524	if [ $KERNEL_IS_XEN = "yes" ]; then
	1525	cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE \|\| Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
[2629]	1526	fi
[1983]	1527	cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
[1885]	1528	fi
[1983]	1529	$ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
[747]	1530	else
[1983]	1531	$ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
[747]	1532	fi
	1533	if [ "$?" -ne "0" ] ; then
[2963]	1534	LogFile "----------- $ISO_CMD's errors --------------"
	1535	LogAll "$ISO_CMD returned the following errors:"
	1536	cat $MINDI_TMP/mkisofs.log \| tee -a $LOGFILE
	1537	LogIt "ERROR: Failed to create ISO image."
[747]	1538	else
[2963]	1539	LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
[747]	1540	fi
[940]	1541	rm -f $MINDI_TMP/mkisofs.log
[2712]	1542	cd "$old_pwd"
[747]	1543	}
	1544
	1545
[1684]	1546	OfferToMakeBootableUSB() {
[2041]	1547	local i
[1684]	1548	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
[2621]	1549	echo -n "Shall I make a bootable USB device ? (y/[n]) "
[1764]	1550	read i
	1551	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1552	if [ "$USBDEVICE" = "" ]; then
	1553	echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
	1554	read dev
	1555	USBDEVICE=$dev
[1722]	1556	fi
[1764]	1557	echo "WARNING: This will erase all content on $USBDEVICE"
	1558	echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
[2040]	1559	read i
	1560	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
[1684]	1561	fi
	1562	rm -Rf $MINDI_TMP/usb
	1563	mkdir -p $MINDI_TMP/usb
	1564	USBPART="${USBDEVICE}1"
	1565
	1566	echo -en "Transforming $USBDEVICE in a Bootable device "
	1567	echo -en "."
[2963]	1568	LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
	1569	LogFile "INFO: Checking $USBDEVICE"
[2924]	1570	$FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
[1684]	1571	if [ $? -ne 0 ]; then
[2963]	1572	LogAll "ERROR: Unable to access $USBDEVICE"
	1573	LogAll " Make sure your USB device is pluged in"
	1574	MindiExit -1
[1684]	1575	fi
	1576	echo -en "."
[2963]	1577	LogFile "INFO: Unmounting $USBPART just in case"
[1721]	1578	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[2057]	1579	# If your key has no MBR it may cause an issue
	1580	# Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
[2855]	1581	if [ -r $MBRFILE ]; then
[2963]	1582	LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
[2855]	1583	dd if=$MBRFILE of=$USBDEVICE
	1584	else
[2963]	1585	LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
	1586	LogAll " on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
[2855]	1587	fi
[2963]	1588	LogFile "INFO: Preparing $USBDEVICE"
[2851]	1589	cat > $MINDI_TMP/fdisk.txt << EOF
[2057]	1590	d
	1591	d
	1592	d
	1593	d
[1684]	1594	n
	1595	p
	1596	1
	1597
	1598
	1599	t
	1600	b
	1601	a
	1602	1
	1603	w
	1604	EOF
[2851]	1605	$FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
[1684]	1606	if [ $? -ne 0 ]; then
[2963]	1607	LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
	1608	LogAll " Make sure your USB device is pluged in"
[1684]	1609	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1610	MindiExit -1
	1611	fi
[2963]	1612	LogFile "fdisk build file"
	1613	LogFile "----------------"
[2851]	1614	cat $MINDI_TMP/fdisk.txt >> $LOGFILE
[2963]	1615	LogFile "----------------"
[2924]	1616	rm -f $MINDI_TMP/fdisk.txt
[2963]	1617	LogFile "INFO: The USB device $USBDEVICE now looks like this:"
[2190]	1618	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
[1684]	1619	echo -en "."
[3006]	1620	# Calling kpartx in case devices were not created
[3033]	1621	if [ -x "/sbin/kpartx" ]; then
[3027]	1622	/sbin/kpartx -a $USBDEVICE
	1623	fi
[2461]	1624	# Some distro do auto mount at that point (Ubuntu)
[2963]	1625	LogFile "INFO: Unmounting $USBPART just in case again"
[2461]	1626	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
	1627	echo -en "."
[2963]	1628	LogFile "INFO: Creating a vfat filesystem on $USBPART"
[1688]	1629	mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
[1684]	1630	if [ $? -ne 0 ]; then
[2963]	1631	LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
	1632	LogAll " Make sure your USB device is pluged in and partitioned ($USBPART must exist on it)"
[1684]	1633	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1634	MindiExit -1
	1635	fi
	1636	echo -en "."
[2963]	1637	LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
[1684]	1638	mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
	1639	if [ $? -ne 0 ]; then
[2963]	1640	LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
	1641	LogAll " Make sure your USB device is pluged in, partitioned and formated ($USBPART must exist on it)"
[1684]	1642	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1643	MindiExit -1
	1644	fi
	1645	echo -en "."
[1691]	1646	mkdir -p $MINDI_TMP/usb/images
[2963]	1647	cp -f $MINDI_CACHE/.img $MINDI_CACHE/.gz $MINDI_TMP/usb/images 2>> $LOGFILE \|\| LogIt "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
[1684]	1648	echo -en "."
[2963]	1649	LogFile "INFO: mindi_lib = $MINDI_LIB"
[1684]	1650	for i in memdisk memtest.bin memtest.img ; do
	1651	j=$MINDI_LIB/$i
	1652	k=$MINDI_TMP/usb
	1653	if [ -e "$j" ] ; then
[2963]	1654	LogIt "INFO: Copying $j to $k"
[2092]	1655	cp -f $j $k 2>> $LOGFILE \|\| Die "Failed to copy $j to $k"
	1656	cp -f $j $MINDI_TMP 2>> $LOGFILE \|\| Die "Failed to copy $j to $MINDI_TMP"
[1684]	1657	fi
	1658	done
	1659	echo -en "."
[2948]	1660	MakeMessageFile \| cut -c1-80 > $MINDI_TMP/usb/message.txt
[1684]	1661	echo -en "."
[2092]	1662	cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE \|\| Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
[1684]	1663	echo -en "."
[1983]	1664	cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
[1684]	1665	echo -en "."
[2041]	1666	MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
[1684]	1667	echo -en "."
[2963]	1668	LogAll "----------- syslinux's conf --------------"
[2476]	1669	cat $MINDI_TMP/usb/syslinux.cfg \|tee -a $LOGFILE
[2963]	1670	LogAll "------------------------------------------"
[1721]	1671	umount $MINDI_TMP/usb
[1684]	1672	if [ "$ARCH" != "ia64" ] ; then
[2939]	1673	syslinux -v 2>&1 \| grep -q 4.02
	1674	if [ $? -eq 0 ]; then
	1675	# This buggy version of syslinux requires a call to --stupid and not -s
	1676	syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
	1677	res=$?
	1678	else
	1679	syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
	1680	res=$?
	1681	fi
	1682	if [ $res -ne 0 ] ; then
[2963]	1683	LogAll "----------- syslinux's errors --------------"
[1684]	1684	cat $MINDI_TMP/syslinux.log \|tee -a $LOGFILE
[2963]	1685	LogAll "------------------------------------------"
	1686	LogIt "ERROR: Failed to create USB image."
[1684]	1687	else
	1688	echo -e "$DONE"
[2963]	1689	LogFile "INFO: Created bootable USB image on $USBDEVICE"
[1684]	1690	fi
	1691	rm -f $MINDI_TMP/syslinux.log
	1692	else
[2963]	1693	LogAll "ERROR: No USB boot support for ia64"
[1684]	1694	MindiExit -1
	1695	fi
	1696	}
	1697
	1698
[747]	1699	MakeMessageFile() {
[2292]	1700
	1701	if [ -x "/bin/lsb_release" ]; then
	1702	DESC=`/bin/lsb_release -d \| cut -d: -f2 \| sed "s/[ \t]*//"`
[2754]	1703	elif [ -r /etc/arch-release ]; then # this code must be written before /etc/issue test to avoid errors
	1704	DESC="Arch Linux"
	1705	if [ -r /var/log/pacman.log ]; then
	1706	# there are no releases but we can get the last system upgrade
	1707	# Output example: Arch Linux [2011-03-03 01:39]
	1708	DESC="$DESC $(tac /var/log/pacman.log \| grep -m1 'full system upgrade' \| cut -d']' -f1)]"
	1709	fi
[2732]	1710	elif [ -r /etc/issue.net ]; then
[2731]	1711	DESC=`head -1 /etc/issue.net`
[2732]	1712	elif [ -r /etc/issue ]; then
[2731]	1713	DESC=`head -1 /etc/issue`
[2292]	1714	elif [ -x "/usr/bin/pbdistrocheck" ]; then
	1715	# For pb >= 0.9.8
[2731]	1716	DESC=`/usr/bin/pbdistrocheck -s \| cut -d, -f1-4`
[747]	1717	else
[2731]	1718	DESC="Unknown desc"
[747]	1719	fi
[2292]	1720	sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt \| sed "s/KKKKK/Kernel $KERVER/" \| sed "s/AAAAA/on a $ARCH architecture/" \| sed "s/TTTTT/`LC_TIME=C date`/" \| sed "s/MMMMM/`hostname`/" \| sed "s/DDDDD/$DESC/"
[1885]	1721	if [ _"$MONDO_SHARE" != _"" ]; then
	1722	if [ "$CDRECOVERY" != "yes" ] ; then
[2380]	1723	if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
[1885]	1724	echo -en "Press <enter> to continue.\n"
	1725	elif [ ! "$MINDI_TMP" ] ; then
	1726	echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
[1983]	1727	if [ -e "$MINDI_LIB/memtest.img" ] ; then
	1728	echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
	1729	fi
[1885]	1730	else
	1731	echo -en "$BOOT_MEDIA_MESSAGE"
[747]	1732	fi
[1983]	1733	else
	1734	echo -en "\
[747]	1735	To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
	1736	CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
[1983]	1737	fi
[747]	1738	fi
	1739	echo -en "\n\n\n"
	1740	}
	1741
	1742
[1983]	1743	MakeBootConfFile() {
[1885]	1744	local options i ooo
[747]	1745	options=""
[1983]	1746	# Type of boot file (elilo or syslinux/isolinux)
	1747	type=$1
	1748	if [ "$type" = "elilo" ]; then
	1749	sep="="
	1750	else
	1751	sep=" "
	1752	fi
[925]	1753
[1983]	1754	# Generic header for conf file
	1755	if [ "$type" != "elilo" ] ; then
	1756	echo -en "prompt 1\ndisplay message.txt\n"
	1757	else
	1758	echo -en "prompt\n"
[925]	1759	fi
[1983]	1760
	1761	# Compute which default option to boot from
[747]	1762	if [ "$CDRECOVERY" = "yes" ] ; then
[1983]	1763	echo -en "default${sep}RESTORE\n"
	1764	# In case it's mondoarchive
[1885]	1765	elif [ _"$MONDO_SHARE" != _"" ]; then
[2380]	1766	if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
[1983]	1767	echo -en "default${sep}iso\n"
[747]	1768	else
[3053]	1769	echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
[747]	1770	fi
	1771	else
[1983]	1772	echo -en "default${sep}expert\n"
[747]	1773	fi
	1774
[1983]	1775	# Handle timeout
[747]	1776	if [ "$CDRECOVERY" != "yes" ] ; then
[3053]	1777	echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
[1983]	1778	else
	1779	echo -en "timeout${sep}10000\n"
[747]	1780	fi
	1781	echo -en "\n"
[1983]	1782
[2124]	1783	# prepare which labels will be generated
[747]	1784	if [ "$CDRECOVERY" = "yes" ] ; then
[925]	1785	options="RESTORE expert"
[1885]	1786	else
	1787	if [ _"$MONDO_SHARE" != _"" ]; then
[2344]	1788	options="interactive expert compare iso nuke isonuke"
[747]	1789	else
	1790	options="expert"
[925]	1791	fi
[747]	1792	fi
[1983]	1793
	1794	# Generate rest of conf file
[747]	1795	for i in $options ; do
[925]	1796	ooo=$i
	1797	[ "$ooo" = "RESTORE" ] && ooo="nuke"
[1983]	1798	if [ "$type" = "elilo" ]; then
[2564]	1799	outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
[925]	1800	else
[2073]	1801	ps="/"
	1802	if [ "$type" = "syslinux" ]; then
	1803	ps=""
	1804	fi
[2629]	1805	if [ $KERNEL_IS_XEN = "no" ]; then
	1806	outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
	1807	else
	1808	outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
	1809	fi
[925]	1810	fi
[1885]	1811	echo -en "$outstr"
[747]	1812	done
[1983]	1813	if [ -e "$MINDI_LIB/memtest.img" ] ; then
	1814	if [ "$type" = "elilo" ]; then
	1815	echo -en "image=/memtest.bin\n\tlabel=memtest\n"
[2073]	1816	echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
[1983]	1817	else
[2073]	1818	ps="/"
	1819	if [ "$type" = "syslinux" ]; then
	1820	ps=""
	1821	fi
	1822	echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
	1823	echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
[1983]	1824	fi
	1825	fi
[747]	1826	}
	1827
	1828
	1829	PrepareBootDiskImage_LILO() {
[1983]	1830	local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
	1831	imagesdir=$MINDI_CACHE
	1832	kernelpath=$1
[747]	1833
	1834	retval=0
[2690]	1835	[ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
[1885]	1836	echo -en "Making "$BOOT_SIZE"KB boot disk..."
[1983]	1837	TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath \| cut -f1` \|\| Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
[747]	1838	echo -en "..."
[1885]	1839	imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
[940]	1840	mountpoint=$MINDI_TMP/mountpoint.$$
[747]	1841	mkdir -p $mountpoint
[1885]	1842	dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null \|\| Die "Cannot dd blank file"
[1983]	1843	mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
[2963]	1844	mount -t vfat -o loop $imagefile $mountpoint \|\| LogIt "ERROR: Cannot mount (PBDI)"
[964]	1845	# copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
[747]	1846	mkdir -p $mountpoint/etc
[1983]	1847	liloconf=$mountpoint/elilo.conf
[747]	1848
[1983]	1849	MakeBootConfFile elilo > $liloconf
[747]	1850
[1230]	1851	# Copy it so that CD-ROM menu entry is satisfied
[1983]	1852	mountefi=0
	1853	df -T \| grep /boot/efi \| grep -q vfat
	1854	if [ $? -ne 0 ]; then
	1855	mount /boot/efi
[1230]	1856	if [ $? -ne 0 ]; then
[1983]	1857	echo "You have to mount your EFI partition when using mindi"
	1858	MindiExit -1
[1230]	1859	fi
[1983]	1860	mountefi=1
[1230]	1861	fi
[1983]	1862	el=`find /boot/efi -name elilo.efi`
	1863	cp $el $mountpoint
	1864	cp $liloconf $mountpoint
	1865	if [ $mountefi -eq 1 ]; then
	1866	umount /boot/efi 2>&1 > /dev/null
	1867	fi
[1230]	1868
[2963]	1869	LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
[1983]	1870	cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
[747]	1871	if [ "$?" -ne "0" ] ; then
[2963]	1872	LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
[940]	1873	cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
[2963]	1874	LogIt " Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
[940]	1875	rm -f $MINDI_TMP/mtpt.$$
[2963]	1876	LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
[747]	1877	retval=$(($retval+1))
	1878	fi
[2948]	1879	MakeMessageFile \| cut -c1-80 > $mountpoint/message.txt
[747]	1880
	1881	mkdir -p $mountpoint/tmp
[1983]	1882	if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
	1883	cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
[747]	1884	fi
	1885
[925]	1886	# copy the kernel across
[1230]	1887	[ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
[747]	1888	dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
[1796]	1889	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
[2092]	1890	cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
[1885]	1891	if [ "$?" -ne "0" ] ; then
[2963]	1892	LogFile "INFO: Files at mountpoint ($mountpoint) :"
[925]	1893	du -sk $mountpoint/* >> $LOGFILE
[2963]	1894	LogFile "--- end of list of files ---"
[2691]	1895	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
[1998]	1896	[ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
[2712]	1897	cd "$old_pwd"
[747]	1898	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
[2963]	1899	rmdir $mountpoint \|\| LogIt "ERROR: Cannot rmdir (PBDI)"
[925]	1900	# losetup /dev/loop0 -d
[1998]	1901	[ "$imagefile" != "" ] && rm -f $imagefile
[2963]	1902	LogIt "ERROR: Sorry, your kernel is too big for your image"
[2773]	1903	Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
[1885]	1904	return 0
[747]	1905	fi
	1906	max_kernel_size=$(($free_space+`du -sk $kernelpath \| cut -f1`))
[2963]	1907	LogFile "INFO: Free space left on image = $free_space KB"
	1908	LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
[1794]	1909	# make it bootable
[1998]	1910	[ "$mountpoint" != "" ] && rm -f $mountpoint/zero
[963]	1911	[ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
[1983]	1912	if [ "$KERN_DISK_MADE" ] ; then
[2963]	1913	LogFile "INFO: Not running LILO. It's not that kind of disk."
[747]	1914	fi
[925]	1915
[1983]	1916	cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
[747]	1917	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
	1918	echo -en "..."
[2963]	1919	rmdir $mountpoint \|\| LogIt "ERROR: Cannot rmdir (PBDI)"
[747]	1920	if [ "$retval" -eq "0" ] ; then
[1885]	1921	echo -en "...$DONE\n"
[747]	1922	if [ "$KERN_DISK_MADE" ] ; then
[2963]	1923	LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
[747]	1924	fi
	1925	else
[1885]	1926	echo -en "...failed\n"
[2963]	1927	LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
[1998]	1928	[ "$imagefile" != "" ] && rm -f $imagefile
[747]	1929	fi
[2963]	1930	[ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
[747]	1931	return $retval
	1932	}
	1933
	1934
[2073]	1935	PrepareBootDiskImage_ISOLINUX() {
[1983]	1936	local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage
	1937	imagesdir=$MINDI_CACHE
	1938	kernelpath=$1
[747]	1939	do_boot_root_thingy=""
	1940	local retval old_pwd
	1941	retval=0
[925]	1942
[2690]	1943	[ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
[1885]	1944	echo -en "Making "$BOOT_SIZE"KB boot disk..."
[1983]	1945	TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath \| cut -f1` \|\| Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
[747]	1946	echo -en "..."
[2067]	1947	imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
[940]	1948	mountpoint=$MINDI_TMP/mountpoint.$$
[747]	1949	mkdir -p $mountpoint
[1885]	1950	dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null \|\| Die "Cannot dd blank file"
[2963]	1951	LogFile "INFO: Creating vfat filesystem on $imagefile"
[1885]	1952	mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
[2067]	1953	# syslinux should be run on a local file (doen't work through NFS Cf: #297)
[1885]	1954	syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
	1955
[2625]	1956	# Only move it now to its final destination and use it now
[2067]	1957	mv $imagefile $imagesdir
	1958	imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
	1959
[2963]	1960	mount -t vfat -o loop $imagefile $mountpoint \|\| LogIt "ERROR: Cannot mount (PBDI)"
[925]	1961
	1962	# copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
[2948]	1963	MakeMessageFile \| cut -c1-80 > $mountpoint/message.txt
[2073]	1964	MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
[2963]	1965	LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
[1983]	1966	cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
[747]	1967	if [ "$?" -ne "0" ] ; then
[2963]	1968	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
[940]	1969	cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
[2963]	1970	LogAll " Please unload some of your modules and try again."
[940]	1971	rm -f $MINDI_TMP/mtpt.$$
[2963]	1972	LogAll " Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
	1973	LogAll " Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
[747]	1974	retval=$(($retval+1))
	1975	fi
	1976
	1977	mkdir -p $mountpoint/tmp
[1983]	1978	if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
	1979	cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
	1980	fi
[747]	1981
[925]	1982	# copy the kernel across
[1230]	1983	[ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
[747]	1984	dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
[1796]	1985	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
[2629]	1986
	1987	retval=0
[2681]	1988	cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
	1989	retval=$?
	1990	if [ $KERNEL_IS_XEN = "yes" ]; then
[2629]	1991	cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
	1992	let retval+=$?
	1993	fi
	1994
	1995	if [ "$retval" -ne "0" ] ; then
[2963]	1996	LogFile "INFO: Files at mountpoint ($mountpoint) :"
[747]	1997	du -sk $mountpoint/* >> $LOGFILE
[2963]	1998	LogFile "--- end of list of files ---"
[2691]	1999	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
[1998]	2000	[ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
[2712]	2001	cd "$old_pwd"
[747]	2002	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
[2963]	2003	rmdir $mountpoint \|\| LogIt "ERROR: Cannot rmdir (PBDI)"
[747]	2004
[2963]	2005	LogIt "ERROR: Sorry, your kernel is too big for your image"
[2773]	2006	Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
[747]	2007	fi
	2008	max_kernel_size=$(($free_space+`du -sk $kernelpath \| cut -f1`))
[2963]	2009	LogFile "INFO: Free space left on image = $free_space KB"
	2010	LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
[925]	2011
	2012	# make it bootable
[1998]	2013	[ "$mountpoint" != "" ] && rm -f $mountpoint/zero
[747]	2014	mkdir -p $mountpoint/etc
[963]	2015	[ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
[747]	2016	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
	2017	echo -en "..."
[2963]	2018	rmdir $mountpoint \|\| LogIt "ERROR: Cannot rmdir (PBDI)"
[747]	2019
	2020	if [ "$retval" -eq "0" ] ; then
[1885]	2021	echo -en "...$DONE\n"
[747]	2022	if [ "$KERN_DISK_MADE" ] ; then
[1998]	2023	[ "$imagefile" != "" ] && rm -f $imagefile
[2963]	2024	LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
[747]	2025	fi
	2026	else
[1885]	2027	echo -en "...failed\n"
[2963]	2028	LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
[1998]	2029	[ "$imagefile" != "" ] && rm -f $imagefile
[747]	2030	fi
[2963]	2031	[ "$retval" -ne "0" ] && LogIt "ERROR: PrepareBootDiskImage() is returning nonzero"
[747]	2032	return $retval
	2033	}
	2034
	2035
[2006]	2036	ParseModprobeForIncludes() {
	2037	local MODPROBE_CONF mpincfile includes include
	2038
	2039	MODPROBE_CONF=/etc/modprobe.conf
	2040	mpincfile=$1
	2041	touch $mpincfile
	2042	if [ -a $MODPROBE_CONF ]; then
[2431]	2043	includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF\|sort -u)
[2006]	2044	if [ -n "$includes" ]; then
	2045	for include in $includes
	2046	do
	2047	if [ -a "$include" ]; then
	2048	echo $include >> $mpincfile
	2049	fi
	2050	done
	2051	fi
	2052	fi
	2053	}
	2054
	2055
[747]	2056	PrepareDataDiskImages() {
[2006]	2057	local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
[747]	2058
[1983]	2059	imagesdir=$MINDI_CACHE
[1902]	2060	rm -f $imagesdir/mindi.iso
[940]	2061	needlist=$MINDI_TMP/what-we-need.txt
	2062	bigdir=$MINDI_TMP/bigdir
[747]	2063	mkdir -p $bigdir/usr/bin
[1983]	2064	mkdir -p $bigdir/usr/sbin
[2006]	2065	includefile=$MINDI_TMP/$$.includefile.txt
[747]	2066
[2409]	2067	if [ -e "$DEPLIST_FILE" ]; then
	2068	lfiles="$DEPLIST_FILE $DEPLIST_DIR/*"
	2069	else
	2070	lfiles="$DEPLIST_DIR/*"
	2071	fi
[1885]	2072	lines=`grep -vx " #." $lfiles \| grep -vx "" \| wc -l`
[2006]	2073	ParseModprobeForIncludes $includefile
[2019]	2074	lines=$(($lines+`cat $includefile \| wc -l`))
[2006]	2075	cat $lfiles $includefile \| GenerateGiantDependencyList $needlist $lines
[747]	2076	res=$?
[2006]	2077	rm -f $includefile
[747]	2078	if [ "$YOUR_KERNEL_SUCKS" ]; then
[925]	2079	pwd=`pwd`
[2712]	2080	cd "$MINDI_TMP"
[747]	2081	for i in `ListKernelModulePaths \| HackPathsToFailsafe` ; do
[2712]	2082	tar cf - ./$i 2>> $MINDI_TMP/$$.log \| (cd "$bigdir" ; tar xf -) \|\| Die "PDDI can't copy $i->$bigdir" $MINDI_TMP/$$.log
[747]	2083	done
[925]	2084	for i in $EXTRA_MODS ; do
[1810]	2085	j=`find lib/modules/$FAILSAFE_KVER -name $i.*o.gz 2> /dev/null`
[2995]	2086	[ ! "$j" ] && LogFile "WARNING: cannot find failsafe module $i.o.gz"
[925]	2087	for k in $j ; do
[2963]	2088	tar cf - $k 2>> $MINDI_TMP/$$.log \| (cd "$bigdir" ; tar xf -) \|\| LogIt "ERROR: module $k extraction issue" $MINDI_TMP/$$.log
	2089	LogFile "INFO: Added failsafe module $k to ramdisk"
[925]	2090	done
	2091	done
[2712]	2092	cd "$pwd"
[747]	2093	else
[925]	2094	ListKernelModulePaths >> $needlist
[747]	2095	fi
	2096	if [ "$res" -ne "0" ] ; then
[1902]	2097	Die "You have $res files present in dependency list\nbut absent from filesystem."
[747]	2098	fi
	2099	FindAndAddUserKeyboardMappingFile
	2100	mkdir -p $bigdir/tmp
[1885]	2101	if [ _"$MONDO_SHARE" != _"" ]; then
[940]	2102	MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
	2103	cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
[747]	2104	fi
	2105	[ -d "/mnt/.boot.d" ] && echo "Oh Jebus" > $bigdir/tmp/DUMBASS-GENTOO
	2106	DropOptimizedLibraries $needlist $bigdir
	2107	echo -en "Assembling dependency files"
	2108	CopyDependenciesToDirectory < $needlist $bigdir
	2109
[925]	2110	# also copy io.sys and msdos.sys, if we can find them
[747]	2111	for i in `mount \| cut -d' ' -f3` ; do
[925]	2112	for j in io.sys msdos.sys ; do
[963]	2113	[ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
[925]	2114	done
[747]	2115	done
	2116
[925]	2117	# master boot record, too
[940]	2118	i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
[747]	2119	if [ "$i" ] ; then
[2963]	2120	LogIt "INFO: Backing up $i's MBR"
[925]	2121	dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
	2122	sleep 1
	2123	sync
	2124	j=$i
	2125	[ -h "$j" ] && j=`readlink -f $j`
[2963]	2126	LogIt "INFO: Creating /dev/boot_device ($j)"
[925]	2127	mkdir -p $bigdir/dev
[2089]	2128	cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE \|\| Die "Unable to create /dev/boot_device on ramdisk"
[747]	2129	fi
	2130
	2131	old_pwd=`pwd`
[2712]	2132	cd "$bigdir"
[747]	2133
[1983]	2134	# Get terminfo content
	2135	ti="usr/share/terminfo/l"
	2136	if [ -d /$ti ]; then
	2137	mkdir -p $ti
[2963]	2138	cp -Rdf /$ti/* $ti 2>> $LOGFILE \|\| LogIt "ERROR: issue copying terminfo"
[747]	2139	fi
[1764]	2140	if [ -e "$MONDO_SHARE/restore-scripts" ]; then
[747]	2141	cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
[1335]	2142	[ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
[747]	2143	fi
[2290]	2144	if [ -d "/lib/dev-state" ]; then
[2963]	2145	tar cf - -C / ./lib/dev-state 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
[2290]	2146	fi
[2712]	2147	cd "$old_pwd"
[747]	2148	echo -e "$DONE"
	2149	TOTAL_BIGDIR_SIZE=`du -sk $bigdir \| cut -f1`
[940]	2150	MakeMountlist $MINDI_TMP/mountlist.txt
[2432]	2151	CheckMountlist $MINDI_TMP/mountlist.txt
[1902]	2152	mkdir -p $bigdir/tmp
[2092]	2153	cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE \|\| Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
[1885]	2154	if [ _"$MONDO_SHARE" != _"" ]; then
[1902]	2155	cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
[1885]	2156	fi
[2032]	2157	if [ $LVM != "false" ]; then
	2158	$MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
	2159	if [ "$?" -ne "0" ]; then
	2160	LVM="false"
	2161	rm -f $bigdir/tmp/i-want-my-lvm
[2552]	2162	else
[2963]	2163	LogFile "Your i-want-my-lvm file content is:"
	2164	LogFile "-----------------------------------"
[2552]	2165	cat $bigdir/tmp/i-want-my-lvm >> $LOGFILE
[2963]	2166	LogFile "-----------------------------------"
[2032]	2167	fi
	2168	fi
[2963]	2169	LogFile "Your mountlist.txt file content is:"
	2170	LogFile "-----------------------------------"
[1902]	2171	cat $bigdir/tmp/mountlist.txt >> $LOGFILE
[2963]	2172	LogFile "-----------------------------------"
[2432]	2173
[2092]	2174	echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
	2175	echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
[1902]	2176	if [ _"$MONDO_SHARE" != _"" ]; then
	2177	for q in filelist.full.gz biggielist.txt ; do
	2178	[ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
	2179	cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
	2180	done
	2181	fi
	2182
	2183	echo -en "Tarring and zipping the data content..."
	2184	size_of_all_tools=`du -sk $bigdir \| cut -f1`
[2963]	2185	(cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log \| gzip -9 > $imagesdir/all.tar.gz \|\| LogIt "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
[1902]	2186	du -sk $imagesdir/*gz >> $LOGFILE
	2187	echo -e "$DONE"
	2188
[747]	2189	FRIENDLY_OUTSTRING="Boot and data disk images were created."
[1902]	2190	rm -rf $bigdir
[747]	2191	rm -f $needlist
	2192	}
	2193
	2194
	2195	ProcessLDD() {
[1784]	2196	local incoming f d nd bd bnd
[747]	2197	read incoming
[1784]	2198	while [ "$incoming" != "" ]; do
[859]	2199	# We take the full path name of the dyn. lib. we want
[2431]	2200	incoming=`echo "$incoming" \| $AWK '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
[1526]	2201	for f in $incoming ; do
[1784]	2202	# echo modified file name if one of the parent dir is a link
	2203	# by replacing the original dirname by the destination of the link
	2204	d="`dirname $f`"
	2205	found="false"
	2206	while [ "$d" != "/" ]; do
	2207	if [ -h "$d" ]; then
	2208	nd=`readlink -f $d`
	2209	bd=`basename $d`
	2210	bnd=`basename $nd`
	2211	f=`echo $f \| sed "s~/$bd/~/$bnd/~"`
	2212	echo $d
	2213	fi
	2214	d="`dirname $d`"
	2215	done
	2216
[1721]	2217	echo "$f"
	2218	echo "`ReadAllLink $f`"
[747]	2219	done
	2220	read incoming
	2221	done
	2222	}
	2223
	2224
	2225	Prompt() {
	2226	echo -en "$1"
	2227	read line
	2228	}
	2229
	2230
	2231	ReadLine() {
	2232	local i incoming
	2233	read incoming
	2234	i=0
	2235	while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
[925]	2236	i=$(($i+1))
	2237	read incoming
[747]	2238	done
	2239	echo "$incoming"
	2240	}
	2241
	2242
	2243	SizeOfPartition() {
	2244	local devpath drive res stub
	2245	device=$1
[2917]	2246	if [ "`echo "$device" \| grep -E "^/dev/"`" = "" ] ; then
	2247	Die "Cannot find $device's size - is your /etc/fstab sane?"
	2248	fi
[747]	2249	if [ "`echo "$device" \| grep -F "/dev/md"`" != "" ] ; then
[925]	2250	res=`SizeOfRaidPartition $device`
	2251	[ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
	2252	echo "$res"
	2253	return 0
[747]	2254	fi
[925]	2255	# patch from Bill <bill@iwizard.biz> - 2003/08/25
[960]	2256	res=`$FDISK -s $device 2>> $LOGFILE`
[925]	2257	# end patch
[2448]	2258	# take only the first in case of multiple mount (cifs, nfs, ...)
	2259	[ "$res" = "" ] && res=`df -k -P -x supermount \| tr -s '\t' ' ' \| grep -F "$device " \| cut -d' ' -f2 \| head -1`
[747]	2260	[ "$res" = "" ] && res="-1"
	2261	echo $res
	2262	return 0
	2263	}
	2264
	2265
	2266	SizeOfRaidPartition() {
	2267	local real_dev smallest_size silly tmp
	2268
	2269	silly=999999999
	2270	smallest_size=$silly
	2271
	2272	for real_dev in `GetRaidDevMembers $1` ; do
[925]	2273	tmp=`SizeOfPartition $real_dev`
	2274	[ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
[747]	2275	done
	2276
	2277	if [ "$smallest_size" = "$silly" ] ; then
[925]	2278	echo "-1"
	2279	return 1
[747]	2280	else
[925]	2281	echo "$smallest_size"
	2282	return 0
[747]	2283	fi
	2284	}
	2285
	2286
	2287	StripComments()
	2288	{
	2289	local tempfile
[925]	2290
[940]	2291	tempfile=$MINDI_TMP/$$.strip.txt
[963]	2292	cp -f $1 $tempfile 2>> $LOGFILE
[747]	2293	$AWK '{if (substr($0,0,1)!="#" \|\| substr($0,0,3)=="#!/") {print $0;};}' $tempfile > $1
	2294	rm -f $tempfile
[2963]	2295	LogFile "INFO: Stripped comments from $2"
[747]	2296	}
	2297
	2298
[925]	2299
[747]	2300	StripExecutable()
	2301	{
	2302	local tmpfile
[925]	2303
[940]	2304	tmpfile=$MINDI_TMP/stripped.$$.dat
[747]	2305	[ -d "$1" ] \|\| [ -h "$1" ] && return
[963]	2306	cp -f $1 $tmpfile 2>> $LOGFILE
[747]	2307	strip $tmpfile 2> /dev/null
	2308	if [ "$?" -eq "0" ] ; then
[963]	2309	cp -f $tmpfile $1 2>> $LOGFILE
[2963]	2310	LogFile "INFO: Stripped binary $2"
[747]	2311	fi
	2312	rm -f $tmpfile
	2313	}
	2314
[2292]	2315	KernelVer() {
	2316	local fkern_ver fname
[747]	2317
[2292]	2318	fname=$1
	2319	file $fname \| grep -q gzip
	2320	if [ "$?" -eq "0" ] ; then
	2321	# Used by ia64
	2322	fkern_ver=`gzip -cd $fname \| strings 2> /dev/null \| grep "[2-9]+[.][0-9]+[.][0-9]+[^\@]@"`
	2323	else
	2324	fkern_ver=`strings $fname 2> /dev/null \| grep "[2-9]+[.][0-9]+[.][0-9]+[^\@]@"`
	2325	fi
	2326	echo "$fkern_ver"
	2327	}
	2328
	2329
[2880]	2330	# WARNING: This function should just echo the final result !!!
	2331	#
[747]	2332	TryToFindKernelPath() {
[2880]	2333	local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
[925]	2334
[2292]	2335	we_want_version=$KERVERRUN
[747]	2336	possible_kernels=""
	2337	duff_kernels=""
[2880]	2338	output=""
[747]	2339
	2340	if [ "$ARCH" = "ia64" ] ; then
	2341	root="/boot/efi/efi"
	2342	else
	2343	root="/"
	2344	fi
[2681]	2345	# See if we're booted from a Xen kernel
[2889]	2346	# From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
	2347	if [ -f /proc/xen/capabilities ]; then
[2681]	2348	# It's a Xen kernel
	2349	KERNEL_IS_XEN="yes"
[2963]	2350	LogFile "INFO: It's a Xen kernel..."
[2681]	2351	fi
	2352
	2353	for fname in `find $root -maxdepth 2 -type f \| grep -Ei 'lin\|kern\|xen' \| grep -Ev '^/proc/\|^/net/'` ; do
[925]	2354	[ ! -e "$fname" ] && continue
[747]	2355	[ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
[2292]	2356	fkern_ver=`KernelVer $fname`
[747]	2357	[ "$fkern_ver" = "" ] && continue
	2358	[ "`echo "$fkern_ver" \|grep -F "$we_want_version "`" = "" ] && continue
[925]	2359	[ -f "$fname" ] \|\| continue
	2360	[ -h "$fname" ] && continue
	2361	kdate=`uname -v \| $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' \| $AWK '{print $NF;}'`
	2362	file $fname \| grep -q gzip
	2363	if [ "$?" -eq "0" ] ; then
	2364	# Used by ia64
	2365	if [ "`gzip -cd $fname \| strings 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[2880]	2366	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
[925]	2367	duff_kernels="$fname $duff_kernels"
	2368	else
[747]	2369	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2370	possible_kernels="$fname $possible_kernels"
[925]	2371	fi
[747]	2372	else
[925]	2373	if [ "`strings $fname 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[2880]	2374	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
[925]	2375	duff_kernels="$fname $duff_kernels"
	2376	else
[747]	2377	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2378	possible_kernels="$fname $possible_kernels"
[925]	2379	fi
[747]	2380	fi
	2381	done
	2382	if [ ! "$possible_kernels" ] && uname -a \| grep Knoppix > /dev/null ; then
[925]	2383	possible_kernels=`find /boot/vmlinuz-2.* \| tail -n1`
[747]	2384	fi
	2385	if [ ! "$possible_kernels" ] ; then
[2963]	2386	LogFile "INFO: No kernel matches exactly. Are there any duff kernels?"
[747]	2387	possible_kernels="$duff_kernels"
	2388	if [ ! "$possible_kernels" ] ; then
[2963]	2389	LogFile "INFO: Sorry, no duff kernels either"
[747]	2390	else
[2963]	2391	LogFile "INFO: I bet you're running Debian or Gentoo, aren't you?"
	2392	LogFile "INFO: Your kernel doesn't have a sane builddate. Oh well..."
[747]	2393	fi
	2394	fi
[2681]	2395	if [ $KERNEL_IS_XEN = "yes" ]; then
	2396	possible_xenkernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -i "xen" \| sort -u \| tr '\n' ' '`
	2397	noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
	2398	FindMboot32Binary
	2399	fi
[2829]	2400	possible_kernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -vi "xen" \| sort -u \| tr '\n' ' '`
	2401	noof_kernels=`CountItemsIn "$possible_kernels"`
[747]	2402	if [ "$noof_kernels" -eq "0" ] ; then
[2880]	2403	LogFile "Could not find your kernel."
[925]	2404	if [ -e "/boot/vmlinuz" ] ; then
[2963]	2405	LogFile "INFO: Using /boot/vmlinuz as a last resort."
[925]	2406	output=/boot/vmlinuz
[747]	2407	else
[925]	2408	output=""
	2409	fi
[747]	2410	elif [ "$noof_kernels" -eq "1" ] ; then
[2880]	2411	kp=`echo "$possible_kernels" \| sed s/' '//`
[2963]	2412	LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
[2880]	2413	output="$kp"
[747]	2414	else
	2415	for i in $possible_kernels ; do
[2880]	2416	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
[2963]	2417	LogFile "INFO: OK, I used my initiative and found that "
	2418	LogFile "INFO: $i is probably your kernel. "
[925]	2419	output="$i"
[2858]	2420	break
[925]	2421	fi
[747]	2422	done
[2858]	2423	if [ ! -n "$output" ]; then
[2880]	2424	if [ "`echo " $possible_kernels " \| grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
[2681]	2425	output=/boot/vmlinuz
[2963]	2426	LogFile "INFO: Schlomo, this one's for you."
[2681]	2427	else
[2963]	2428	LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
	2429	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
	2430	LogFile "INFO: $possible_kernels"
[2880]	2431	output=""
[2681]	2432	fi
	2433	fi
	2434	fi
	2435	if [ $KERNEL_IS_XEN = "yes" ]; then
	2436	if [ "$noof_xenkernels" -eq "0" ]; then
	2437	xenkernelpath=""
	2438	elif [ "$noof_xenkernels" -eq "1" ]; then
	2439	xenkernelpath=`echo "$possible_xenkernels" \| sed s/' '//`
[2963]	2440	LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
[925]	2441	else
[2681]	2442	for i in $possible_xenkernels ; do
[2880]	2443	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
[2963]	2444	LogFile "INFO: OK, I used my initiative and found that "
	2445	LogFile "INFO: $i is probably your Xen kernel. "
[2681]	2446	xenkernelpath="$i"
[2858]	2447	break
[2681]	2448	fi
	2449	done
[2858]	2450	if [ ! -n "$xenkernelpath" ]; then
[2681]	2451	new_possible_xenkernels=`echo "$possible_xenkernels" \| tr -s ' ' '\n' \| grep -E "^/boot" \| sort -u \| tr '\n' ' '`
	2452	if [ ! -n "$new_possible_xenkernels" ]; then
	2453	xenkernelpath=`echo $new_possible_xenkernels \| tr -s ' ' '\n' \| head -1`
[2963]	2454	LogFile "INFO: Using $xenkernelpath"
[2681]	2455	else
[2963]	2456	LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
	2457	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
	2458	LogFile "INFO: $possible_xenkernels"
[2880]	2459	output=""
[2681]	2460	xenkernelpath=`echo $possible_xenkernels \| tr -s ' ' '\n' \| head -1`
[2963]	2461	LogFile "INFO: Using $xenkernelpath"
[2681]	2462	fi
	2463	fi
[925]	2464	fi
[2681]	2465	if [[ -z "$xenkernelpath" \|\| ! -f "$xenkernelpath" ]]; then
	2466	Die "Cannot find Xen kernel $xenkernelpath, aborting"
	2467	fi
[747]	2468	fi
[2880]	2469	LogAll "TryToFindKernelPath found $output"
[2681]	2470	echo "$output"
[747]	2471	}
	2472
	2473
	2474	TurnTgzIntoRdz() {
[1983]	2475	local tgz_dir_fname rdz_fname tempfile mountpoint old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path
[925]	2476
[747]	2477	tgz_dir_fname=$1
	2478	rdz_fname=$2
[1983]	2479	kernelsize=$3
[1885]	2480	maxsize=$(($BOOT_SIZE-$kernelsize))
[747]	2481	maxsize=$(($maxsize*2)); # to allow for compression of 50%
[940]	2482	tempfile=$MINDI_TMP/temp.rd
	2483	mountpoint=$MINDI_TMP/mnt1
[747]	2484	res=0
	2485	echo -en "..."
	2486	dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null \|\| Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
	2487	echo -en "..."
[2963]	2488	LogFile "INFO: Creating ext2 filesystem on $tempfile"
[1764]	2489	mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE \|\| Die "Unable to create an ext2 file system on $tempfile"
[747]	2490	echo -en "..."
	2491	mkdir -p $mountpoint
	2492	mount -t ext2 -o loop $tempfile $mountpoint \|\| Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
	2493	echo -en "..."
	2494	old_pwd=`pwd`
[2712]	2495	cd "$mountpoint"
[2034]	2496
[3061]	2497	# AL04Oct08: Check whether /lib64 or /lib is a link and if so explicitly create one in rootfs
[2042]	2498	if [ -h "/lib64" ]; then
[2963]	2499	mkdir -p lib \|\| LogIt "ERROR: Unable to create lib in $mountpoint."
	2500	ln -s lib lib64 \|\| LogIt "ERROR: /lib64 is a symbolic link, but I couldn't create it in $mountpoint."
[2042]	2501	fi
[3061]	2502	if [ -h "/lib" ]; then
	2503	mkdir -p usr/lib \|\| LogIt "ERROR: Unable to create usr/lib in $mountpoint."
	2504	mv lib/* usr/lib
[3070]	2505	rmdir lib
[3061]	2506	fi
[3041]	2507	# Check whether /sbin and /bin are a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
	2508	if [ -h "/sbin" ]; then
[3070]	2509	mkdir -p usr/sbin \|\| LogIt "ERROR: Unable to create usr/sbin in $mountpoint."
[3041]	2510	mv sbin/* usr/sbin
[3070]	2511	rmdir sbin
[3041]	2512	fi
	2513	if [ -h "/bin" ]; then
[3070]	2514	mkdir -p usr/bin \|\| LogIt "ERROR: Unable to create usr/bin in $mountpoint."
[3041]	2515	mv bin/* usr/bin
[3070]	2516	rmdir bin
[3041]	2517	fi
[2034]	2518
[2963]	2519	# Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
	2520	for f in $tgz_dir_fname/*; do
	2521	if [ ! -r $f ]; then
	2522	Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
	2523	else
	2524	cp -Rdf $f . 2>&1 >> $LOGFILE
	2525	fi
	2526	done
[747]	2527	tar -zxf symlinks.tgz \|\| Die "Cannot untar symlinks.tgz"
[1914]	2528
[747]	2529	cd dev \|\| Die "Can't cd to dev"
	2530	tar -zxf dev-entries.tgz \|\| Die "Cannot untar dev-entries.tgz"
	2531	rm -f dev-entries.tgz
	2532	cd ..
	2533
	2534	for w in insmod.static insmod.static.old ; do
[925]	2535	s=`which $w 2> /dev/null`
	2536	if [ -e "$s" ] ; then
[2156]	2537	tar cf - -C / $s 2> /dev/null \| tar xf -
[925]	2538	fi
[747]	2539	done
	2540
	2541	[ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
[2951]	2542
[2438]	2543	# Copy of files mandatory for ssh to automate mount if sshfs is used
	2544	mkdir $mountpoint/.ssh
[2875]	2545	cp -rp ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
[2438]	2546	echo > $mountpoint/tmp/myssh << EOF
	2547	ssh -o StrictHostKeyChecking=no $*
	2548	EOF
	2549	chmod 755 $mountpoint/tmp/myssh
	2550
[2039]	2551	# Copy of files mandatory for ld.so
[2042]	2552	cp -rp /etc/ld.so.c* $mountpoint/etc
[2039]	2553
[2951]	2554	# Handle the case where busybox and mount are dynamically linked
	2555	file $MINDI_LIB/rootfs/bin/busybox 2>&1 \| grep -q "dynamically"
	2556	if [ $? -eq 0 ]; then
	2557	# We want to use the real mount and all the supported variants (nfs, cifs, ...)
	2558	rm -f bin/mount
	2559	fi
	2560
	2561	# Copy of files from the minimal env needed as per the deplist.d/minimal.conf file (which includes all busybox deps)
[3039]	2562	mountlis=`grep -E "mount\|fuse\|ssh\|libnss\|bash" $DEPLIST_FILE $DEPLIST_DIR/* \| grep -v " #." \| cut -d: -f2 \| sort -u`
[2951]	2563	rm -f $MINDI_TMP/minimal.lis
[3004]	2564	for f in $MINDI_LIB/rootfs/bin/busybox $mountlis; do
[2951]	2565	echo $f >> $MINDI_TMP/minimal.lis
	2566	done
[3004]	2567	LocateDeps $MINDI_LIB/rootfs/bin/busybox $mountlis >> $MINDI_TMP/minimal.lis
[2951]	2568	for f in `cat $MINDI_TMP/minimal.lis`; do
	2569	echo "`ReadAllLink $f`" >> $MINDI_TMP/minimal.lis
	2570	done
	2571	# Initial / are trucated by tar
[3014]	2572	finallist=""
	2573	# Remove directories from the list, as tar will create them anyway
	2574	# and it may hurt if /lib is in it as on Debian/Ubuntu
	2575	for f in `sort -u $MINDI_TMP/minimal.lis`; do
	2576	if [ ! -d $f ]; then
	2577	finallist="$finallist $f"
	2578	fi
	2579	done
	2580	tar cf - $finallist 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in minimal analysis" $MINDI_TMP/$$.log
[3000]	2581
	2582	# To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
[3039]	2583	ln -sf /bin/bash bin/sh
	2584	LogIt "INFO: Using bash as default shell"
[2951]	2585	rm -f $MINDI_TMP/minimal.lis
	2586
	2587	# Avoids an issue on some distro (RHEL5)
[2164]	2588	rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
	2589
[1914]	2590	mkdir -p $mountpoint/tmp
[1724]	2591	# Management of udev (which includes modprobe in rules)
[1759]	2592	ps auxww \| grep -v grep \| grep -qw udevd
[1716]	2593	if [ $? -eq 0 ]; then
[1914]	2594	echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
[2963]	2595	LogIt "INFO: udev device manager found"
	2596	tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
[1790]	2597	# This avoids NIC remapping if on another machine at restore time on Debian at least
[2145]	2598	rm -f ./etc/udev/rules.d/z[0-9][0-9]_persistent-net.rules
	2599	# This avoids NIC remapping if on another machine at restore time on Ubuntu at least
	2600	rm -f ./etc/udev/rules.d/[0-9][0-9]-persistent-net.rules
[2894]	2601	# Do not do it if it's a link (Ubuntu 64 bits #503)
[2895]	2602	if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
[2963]	2603	tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
[2894]	2604	fi
[2895]	2605	if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [ ! -h "/lib32/udev" ]; then
[2963]	2606	tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
[2895]	2607	fi
	2608	if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [ ! -h "/lib/udev" ]; then
[2963]	2609	tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
[2895]	2610	fi
[2965]	2611	if [ -x /sbin/udevd ] \|\| [ -x /usr/bin/udevd ]; then
[2964]	2612	lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
[1781]	2613	lis=""
	2614	# Get only the files which exist in that list
[1815]	2615	# and potentially their symlink structure
[1781]	2616	for i in $lis2; do
[1815]	2617	if [ -h $i ]; then
	2618	j=$i
	2619	while [ -h $j ]; do
	2620	lis="$lis $j"
	2621	j=`readlink $j`
	2622	done
	2623	lis="$lis $j"
	2624	elif [ -f $i ]; then
[1781]	2625	lis="$lis $i"
	2626	fi
	2627	done
	2628	# And their deps
[1759]	2629	LocateDeps $lis > $MINDI_TMP/udev.lis
	2630	for i in $lis; do
	2631	if [ "`echo $i \| cut -c1`" = "/" ]; then
	2632	j=`echo $i \| cut -c2-`
[1998]	2633	[ "$j" != "" ] && rm -f $j
[1759]	2634	fi
	2635	done
[2963]	2636	tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
[1721]	2637	rm -f $MINDI_TMP/udev.lis
[1720]	2638	else
[2965]	2639	LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
[2963]	2640	LogAll " mindi will use static devices which may cause problems"
[1914]	2641	rm -f $mountpoint/tmp/USE-UDEV
[1720]	2642	fi
[1716]	2643	fi
[1786]	2644
[2882]	2645	# Management of potential HW info (ProLiant only at the moment)
[1880]	2646	rm -rf $MINDI_CACHE/bkphw
	2647	mindi-bkphw $MINDI_CACHE $MINDI_CONF \| tee -a $LOGFILE
	2648	if [ -d $MINDI_CACHE/bkphw ]; then
[2963]	2649	LogIt "INFO: Hardware Information found and saved ..."
[1880]	2650	cp -rp $MINDI_CACHE/bkphw .
	2651	if [ -f $MINDI_CACHE/tools.files ]; then
	2652	lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
[1863]	2653	LocateDeps $lis > $MINDI_TMP/tools.lis
[2963]	2654	tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
[1863]	2655	fi
[1880]	2656	if [ -f $MINDI_CACHE/mindi-rsthw ]; then
	2657	mv -f $MINDI_CACHE/mindi-rsthw .
[1761]	2658	chmod 755 ./mindi-rsthw
	2659	fi
[1880]	2660	rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
[1761]	2661	fi
	2662
[2183]	2663	# Management of perl scripts delivered needed at restore time
	2664	mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` > $MINDI_TMP/perl.lis
[2963]	2665	tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
[2183]	2666
[1885]	2667	for w in cdrom groovy-stuff ; do
[747]	2668	mkdir -p mnt/$w
	2669	done
	2670
[2963]	2671	tar cf - -C / /dev/fd0[1,2][4,7,8] 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
[1721]	2672
[2712]	2673	cd "$old_pwd"
[747]	2674	echo -en "..."
	2675	old_pwd=`pwd`
	2676	if [ "$YOUR_KERNEL_SUCKS" ] ; then
[2712]	2677	cd "$MINDI_TMP"
[1885]	2678	needed_modules_path=lib/modules/$FAILSAFE_KVER
[747]	2679	else
	2680	cd /
	2681	if [ "${kernelname}" != "" ]
	2682	then
[1885]	2683	needed_modules_path=lib/modules/${kernelname}
[747]	2684	else
[2292]	2685	needed_modules_path=lib/modules/$KERVERRUN
[747]	2686	fi
	2687	fi
[1885]	2688
	2689	needed_modules=""
[1993]	2690	list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
[1885]	2691
[2380]	2692	if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
[747]	2693	# For PXE boot
	2694	list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
	2695	fi
[1715]	2696	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
	2697	list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
	2698	fi
[1727]	2699	for i in $DENY_MODS; do
[2963]	2700	LogFile "INFO: Removing $i from the list of modules to load"
[1727]	2701	list_of_groovy_mods=`echo ${list_of_groovy_mods} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
	2702	done
	2703
[2963]	2704	[ -e "$needed_modules_path" ] \|\| LogIt "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
[747]	2705	for i in $list_of_groovy_mods ; do
[1885]	2706	needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
[747]	2707	done
[1914]	2708
[2600]	2709	for i in `echo $needed_modules \| tr ' ' '\n' \| sort -u`; do
[747]	2710	[ -e "$i" ] && s=`du -sk $i \| cut -f1` \|\| s=""
[940]	2711	[ "$YOUR_KERNEL_SUCKS" ] && i=$MINDI_TMP/$i
[2963]	2712	LogFile "INFO: Adding $i ($s KB) to the rootfs"
[3011]	2713	tar cf - -C / $i 2>> $MINDI_TMP/$$.log \| (cd "$mountpoint" ; tar xf -) \|\| LogIt "ERROR: Unable to copy $i to $mountpoint" $MINDI_TMP/$$.log
[1914]	2714	# Uncompress modules if not using udev and native modprobe
[1815]	2715	if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
	2716	if [ "`echo "$i" \| grep -F ".gz"`" ]; then
[2963]	2717	LogFile "INFO: Uncompressing $i"
[1727]	2718	gunzip -f $mountpoint/$i
[1815]	2719	fi
[1727]	2720	fi
[3011]	2721	if [ -L $mountpoint/$i ] && [ `echo "$i" \| grep "\.ko$"` ]; then
	2722	echo "Replacing module symlink ($i) with actual file"
	2723	rm -f $mountpoint/$i
	2724	cp -Lf $i $mountpoint/$i
	2725	ls -l $mountpoint/$i
	2726	fi
[747]	2727	done
[1815]	2728
[2964]	2729	# Also copy modules.* in case of udev so that normal modprobe works
	2730	tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log \| (cd "$mountpoint" ; tar xf -) \|\| LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
[1815]	2731
[2680]	2732	# Copy FW in case some drivers needs it
	2733	if [ -d "/lib/firmware" ]; then
	2734	cp -rp /lib/firmware $mountpoint/lib
	2735	fi
	2736
[2913]	2737	# Copy an additional ProLiant tool for OBDR support
	2738	if [ -f $MINDI_TMP/OBDR ]; then
	2739	if [ -x /usr/bin/hpsa_obdr_mode ]; then
	2740	mkdir -p $mountpoint/usr/bin
	2741	cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
[2963]	2742	LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved OBDR support"
[2913]	2743	else
	2744	LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode tool"
	2745	LogAll " This may lead to a tape not going back to sequential mode after OBDR boot"
	2746	fi
	2747	fi
	2748
[1885]	2749	if [ ! -e "/sbin/devfsd" ] \|\| [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
[2963]	2750	LogFile "INFO: Deleting devfsd daemon from ramdisk"
[2995]	2751	[ ! -e "/sbin/devfsd" ] && LogFile " ...because /sbin/devfsd not found"
	2752	[ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && LogFile " ...because kernel is failsafe"
[747]	2753	rm -f $mountpoint/sbin/devfsd
	2754	fi
[2712]	2755	cd "$old_pwd"
[747]	2756	[ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
	2757	dd if=/dev/zero of=$mountpoint/zero &> /dev/null
	2758	rm -f $mountpoint/zero
[1885]	2759	if [ _"$MONDO_SHARE" != _"" ]; then
[747]	2760	MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
[2092]	2761	cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP 2>> $LOGFILE \|\| Die "Cannot copy mondo-restore.cfg to ramdisk"
	2762	cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE \|\| Die "Cannot copy mountlist to ramdisk"
[747]	2763	echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
	2764	echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
	2765	[ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
[998]	2766	[ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
[747]	2767	[ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
	2768	[ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
	2769	fi
	2770	mkdir -p $mountpoint/proc
[2963]	2771	LogFile "---------------------------"
	2772	LogFile "Content of initial ramdisk:"
	2773	LogFile "---------------------------"
[2712]	2774	(cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
[2963]	2775	LogFile "---------------------------"
[2438]	2776
[1230]	2777	# Determine what filesystem to use for initrd image
[2963]	2778	LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
[1230]	2779	gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
	2780	[ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
[3008]	2781	if [ "$gvFileSystem" = "ext2fs" ] \|\| [ "$gvFileSystem" = "ext3fs" ] \|\| [ "$gvFileSystem" = "ext4fs" ]; then
[1230]	2782	# say what will be used
[2963]	2783	LogFile "INFO: Creating an $gvFileSystem initrd image..."
[1230]	2784	# kernel expects linuxrc in ext2 filesystem
[2712]	2785	( cd "$mountpoint" && ln -sf sbin/init linuxrc )
[1230]	2786	# unmount loop filesystem and create image file using the standard approach
	2787	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
[1764]	2788	dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
[3008]	2789	if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
	2790	bs=`/sbin/tune4fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
	2791	else
	2792	bs=`tune2fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
	2793	fi
[2564]	2794	MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
[1799]	2795	gzip -c9 ${rdz_fname}.tmp > $rdz_fname
[1764]	2796	rm -f ${rdz_fname}.tmp
[1230]	2797	# log that we are done
[2995]	2798	LogFile " ...done."
[2390]	2799	elif [ "$gvFileSystem" = "initramfs" ]; then
[1230]	2800	# say what will be used
[2963]	2801	LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
[1230]	2802	# make sure that cpio is there
	2803	which cpio &> /dev/null; [ $? -eq 0 ] \|\| Die "cpio not found. Please install package cpio and try again."
	2804	# go into filesystem
[2712]	2805	cd "$mountpoint"
[1230]	2806	# kernel expects init in cpio filesystem
	2807	ln -sf sbin/init init
	2808	# create cpio image file and unmount loop filesystem
[1929]	2809	find . -print \| cpio -o -H newc \| gzip -9 > $rdz_fname 2> /dev/null
[2712]	2810	cd "$old_pwd"
[1230]	2811	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
	2812	# log that we are done
[2995]	2813	LogFile " ...done."
[2390]	2814	else
[1230]	2815	Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
[2390]	2816	fi
	2817
[747]	2818	if [ "$res" -eq "0" ] ; then
	2819	echo -en "..."
	2820	else
	2821	echo -en "\rMade an rdz WITH ERRORS. \n"
	2822	fi
	2823	return 0
	2824	}
	2825
	2826
	2827	##############################################################################
[1021]	2828	#----------------------------------- Main -----------------------------------#
[747]	2829	##############################################################################
	2830
[1885]	2831	# Now we can create what we need
	2832	mkdir -p $MINDI_TMP
[747]	2833
[1885]	2834	# Purge from potential old run
	2835	if [ _"$MINDI_CACHE" = _"" ]; then
	2836	Die "MINDI_CACHE undefined"
	2837	fi
	2838
[2995]	2839	# --nolog needs to be first, and is used in analyze-my-lvm
	2840	if [ "$1" = "--nolog" ] ; then
	2841	shift
	2842	LOGFILE=/dev/stderr
	2843	else
	2844	> $LOGFILE
	2845	fi
[1885]	2846	if [ "$1" = "--printvar" ] ; then
	2847	shift
	2848	if [ _"$1" != _"" ] ; then
	2849	set \| grep -Ew "^$1" \| cut -d= -f2
	2850	fi
[2183]	2851	exit 0
[1885]	2852	fi
	2853
[2963]	2854	LogFile "mindi v$MINDI_VERSION"
	2855	LogFile "$ARCH architecture detected"
	2856	LogFile "mindi called with the following arguments:"
[2978]	2857	echo "$@">> $LOGFILE
[2963]	2858	LogFile "Start date : `date`"
	2859	LogFile "-----------------------------"
[747]	2860
	2861	[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && ln -sf /sbin/mkdosfs /sbin/mkfs.vfat
	2862
[1010]	2863	# Log some capital variables
	2864	[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
[2963]	2865	LogFile "MONDO_SHARE = $MONDO_SHARE"
	2866	LogFile "MINDI_LIB = $MINDI_LIB"
	2867	LogFile "MINDI_SBIN = $MINDI_SBIN"
[1010]	2868	[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
[2963]	2869	LogFile "MINDI_CONF = $MINDI_CONF"
[1885]	2870	if [ -f $MINDI_CONFIG ]; then
[2963]	2871	LogFile "-----------------------------"
	2872	LogFile " Mindi configuration file "
	2873	LogFile "-----------------------------"
[1885]	2874	grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
[2963]	2875	LogFile "-----------------------------"
[1885]	2876	fi
[2995]	2877	LogFile "In Mindi"
	2878	LogFile "--------"
	2879	LogFile "EXTRA_SPACE = $EXTRA_SPACE"
	2880	LogFile "BOOT_SIZE = $BOOT_SIZE"
	2881	LogFile "--------"
[1010]	2882
[747]	2883	trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
[1010]	2884
	2885	# Sanity checks
	2886	which which > /dev/null 2> /dev/null \|\| Die "Please install 'which'."
	2887	which strings > /dev/null 2> /dev/null \|\| Die "Please install binutils and libbinutils; you have no 'strings' executable."
	2888	which gawk > /dev/null 2> /dev/null \|\| Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
	2889	which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` \|\| AWK="`which awk 2>/dev/null`"
	2890	if which awk &> /dev/null ; then
	2891	if ! which gawk &> /dev/null ; then
[2963]	2892	LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
[1010]	2893	fi
	2894	fi
	2895	which mke2fs > /dev/null 2> /dev/null \|\| Die "Please put mke2fs in system path"
[2222]	2896	[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
[1010]	2897
[3005]	2898	[ "`echo $KERVERRUN \| grep -E "2\.4\.[0-6]" \| grep -vE "2\.4\.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
[1010]	2899
	2900	# Update the PATH variable if incomplete
	2901	if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
	2902	PATH=$PATH:/sbin:/usr/sbin
	2903	export PATH
[2963]	2904	LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
	2905	LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
	2906	LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
[1010]	2907	fi
	2908
[1885]	2909	# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
	2910	if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ] && [ "$kernelpath" = "FAILSAFE" ]; then
	2911	source $MINDI_LIB/FindDistroFailsafe
	2912	# Log kernel image
[2963]	2913	LogIt "INFO: FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
[1885]	2914	else
	2915	[ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null \| grep -E "2\.[46]" \| cut -d' ' -f1`
	2916	fi
[1010]	2917
[1737]	2918	if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
[1010]	2919	Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
	2920	fi
	2921
[925]	2922	### BERLIOS
[747]	2923	### Fix as it's not mandatory on ia64
	2924	if [ "$ARCH" = "ia64" ] ; then
[1010]	2925	if which elilo &> /dev/null ; then
	2926	LILO_EXE=elilo
	2927	else
[2024]	2928	LILO_EXE=`which false 2> /dev/null`
[1010]	2929	fi
[747]	2930	else
	2931	FindIsolinuxBinary
	2932	fi
	2933	trap "Aborted" SIGTERM
	2934	DONE="\r\t\t\t\t\t\t\t\tDone. "
	2935	kernelpath=""
[1010]	2936	MONDO_ROOT=/var/cache/mondo
[747]	2937	mkdir -p $MONDO_ROOT
	2938
	2939	if [ -d "/proc/lvm" ]; then
	2940	# LVM v1
	2941	LVMCMD=""
	2942	LVM="v1"
	2943	elif [ -d "/dev/mapper" ]; then
	2944	# LVM v2
	2945	LVMCMD="lvm"
	2946	LVM="v2"
	2947	else
	2948	LVM="false"
	2949	fi
[2963]	2950	LogFile "INFO: LVM set to $LVM"
	2951	LogFile "----------"
	2952	LogFile "mount result:"
	2953	LogFile "-------------"
[1230]	2954	mount >> $LOGFILE
[1315]	2955	if [ -e /etc/raidtab ]; then
[2963]	2956	LogFile "-------------"
	2957	LogFile "/etc/raidtab content:"
	2958	LogFile "-------------"
[1315]	2959	cat /etc/raidtab >> $LOGFILE
[3073]	2960	elif
	2961	LogFile "No file /etc/raidtab"
[1315]	2962	fi
[2981]	2963	if [ -e /etc/mdadm.conf ]; then
	2964	LogFile "-------------"
	2965	LogFile "/etc/mdadm.conf content:"
	2966	LogFile "-------------"
	2967	cat /etc/mdadm.conf >> $LOGFILE
[3073]	2968	elif
	2969	LogFile "No file /etc/mdadm.conf"
[2981]	2970	fi
[2963]	2971	LogFile "-------------"
	2972	LogFile "cat /proc/cmdline:"
	2973	LogFile "-------------"
[1418]	2974	cat /proc/cmdline >> $LOGFILE
[2963]	2975	LogFile "-------------"
	2976	LogFile "cat /proc/swaps:"
	2977	LogFile "-------------"
[2014]	2978	cat /proc/swaps >> $LOGFILE
[2963]	2979	LogFile "-------------"
[3073]	2980	if [ -e /proc/mdstat ]; then
	2981	LogFile "cat /proc/mdstat:"
	2982	LogFile "-------------"
	2983	cat /proc/mdstat >> $LOGFILE
	2984	elif
	2985	LogFile "No pseudo file /proc/mdstat"
	2986	fi
[2981]	2987	LogFile "-------------"
[2963]	2988	LogFile "cat /proc/partitions:"
	2989	LogFile "-------------"
[2015]	2990	cat /proc/partitions >> $LOGFILE
[2963]	2991	LogFile "-------------"
	2992	LogFile "cat /proc/filesystems:"
	2993	LogFile "-------------"
[2015]	2994	cat /proc/filesystems >> $LOGFILE
[2963]	2995	LogFile "-------------"
	2996	LogFile "lsmod result:"
	2997	LogFile "-------------"
[1021]	2998	lsmod >> $LOGFILE
[2431]	2999	MODULES="`cat /proc/modules \| $AWK '{print $1}'`"
[1531]	3000	if [ -x /usr/sbin/esxcfg-module ]; then
[2963]	3001	LogFile "-------------"
	3002	LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
	3003	LogFile "-------------"
	3004	LogFile "VMWare modules"
	3005	LogFile "-------------"
[1531]	3006	/usr/sbin/esxcfg-module -l >> $LOGFILE
[2431]	3007	MODULES="$MODULES `/usr/sbin/esxcfg-module -l \| $AWK '{print $1}'`"
[1497]	3008	fi
[2963]	3009	LogFile "FORCE_MODS:"
	3010	LogFile "-------------"
[3065]	3011	LogFile "$FORCE_MODS"
[2963]	3012	LogFile "-------------"
	3013	LogFile "DENY_MODS:"
	3014	LogFile "-------------"
[3065]	3015	LogFile "$DENY_MODS"
[2963]	3016	LogFile "-------------"
	3017	LogFile "df result:"
	3018	LogFile "----------"
[1796]	3019	df -T >> $LOGFILE
[2963]	3020	LogFile "-------------"
[2995]	3021	LogFile "List of extra modules is:"
[2963]	3022	LogFile "$EXTRA_MODS"
	3023	LogFile "-------------"
[747]	3024
[1723]	3025	# Compute libata version
[2649]	3026	laver=`modinfo libata 2> /dev/null \| grep -Ei '^Version:' \| cut -d: -f2 \| cut -d. -f1 \| sed 's/ *//g' 2> /dev/null`
[1723]	3027	# If libata v2 is used then remove ide-generic as it will perturbate boot
[1726]	3028	if [ "`echo $MODULES \| grep libata`" ]; then
[1727]	3029	if [ "$laver" = "2" ]; then
[1726]	3030	DENY_MODS="$DENY_MODS ide-generic"
[2963]	3031	LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
	3032	LogFile "-------------"
[1726]	3033	fi
[1723]	3034	fi
	3035
[2963]	3036	# Check for McAfee which disturbs the access to some files (tgz in articular)
[2976]	3037	if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
[2963]	3038	LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
	3039	LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
	3040	LogFile "WARNING: You have two options:"
	3041	LogFile "WARNING: - Exclude all directories with special files (check McAfee System Events Log)"
	3042	LogFile "WARNING: - Disable the scanner during the backup"
	3043	fi
	3044
[2457]	3045	# Check for ISO_CMD command
	3046	if [ ! -x $ISO_CMD ]; then
[2963]	3047	LogFile "NOTE: No CD image (ISO file) utility found"
[2457]	3048	fi
	3049
[747]	3050	FLOPPY_WAS_MOUNTED=""
	3051	for mtpt in /media/floppy /mnt/floppy /floppy ; do
	3052	if mount \| grep -w $mtpt &> /dev/null ; then
	3053	FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
	3054	umount $mtpt
	3055	fi
	3056	done
	3057
[1684]	3058	#
	3059	# If we have a USB device we need to store info
	3060	# and remove it from the parameters line
	3061	#
[747]	3062	if [ "$#" -ne "0" ] ; then
[1684]	3063	if [ "$1" = "--usb" ] ; then
	3064	shift
	3065	USBDEVICE=$1
	3066	if [ _"$USBDEVICE" = _"" ]; then
	3067	Die "No USB device specified"
	3068	fi
	3069	shift
	3070	fi
	3071	fi
	3072
	3073	if [ "$#" -ne "0" ] ; then
[747]	3074	if [ "$1" = "--findkernel" ] ; then
[2880]	3075	resk=`TryToFindKernelPath`
[1336]	3076	# Avoids logfile content for mondo
	3077	export MONDO_SHARE=""
[2880]	3078	if [ "$resk" = "" ] ; then
[2838]	3079	if [ $KERNEL_IS_XEN = "yes" ]; then
	3080	echo "$xenkernelpath"
[2963]	3081	LogFile "INFO: xenkernelpath = $xenkernelpath"
[2860]	3082	MindiExit 0
[2838]	3083	else
[2860]	3084	MindiExit -1
[2838]	3085	fi
[747]	3086	else
[2880]	3087	echo "$resk"
[2963]	3088	LogFile "INFO: kernelpath = $resk"
[2860]	3089	MindiExit 0
[747]	3090	fi
[1720]	3091	elif [ "$1" = "--locatedeps" ] ; then
	3092	[ ! "$2" ] && Die "Please specify the binary to look at"
[2438]	3093	LocateDeps $*
[1720]	3094	# Avoids logfile content for mondo
	3095	export MONDO_SHARE=""
	3096	MindiExit $?
[1815]	3097	elif [ "$1" = "--readalllink" ] ; then
	3098	[ ! "$2" ] && Die "Please specify the binary to look at"
	3099	# Avoids logfile content for mondo
	3100	export MONDO_SHARE=""
[2978]	3101	ReadAllLink $2
[1815]	3102	MindiExit $?
[2731]	3103	elif [ "$1" = "--makemessage" ] ; then
[2948]	3104	MakeMessageFile \| cut -c1-80
[2731]	3105	MindiExit 0
[747]	3106	elif [ "$1" = "--makemountlist" ] ; then
	3107	[ ! "$2" ] && Die "Please specify the output file"
	3108	MakeMountlist $2
[2432]	3109	CheckMountlist $2
[1336]	3110	# Avoids logfile content for mondo
	3111	export MONDO_SHARE=""
[925]	3112	MindiExit $?
	3113	elif [ "$1" = "-V" ] \|\| [ "$1" = "-v" ] \|\| [ "$1" = "--version" ] \|\| [ "$1" = "-version" ] ; then
	3114	echo "Mindi v$MINDI_VERSION"
[1336]	3115	# Avoids logfile content for mondo
	3116	export MONDO_SHARE=""
[925]	3117	MindiExit 0
[747]	3118	elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
[940]	3119	MONDO_TMP=$2
	3120	# Change MINDI_TMP for the one provided by mondo
	3121	# So that it can get back the built files
[2153]	3122	if [ _"$MONDO_TMP" = _"" ]; then
	3123	Die "MONDO_TMP is empty, aborting"
	3124	fi
	3125	if [ _"$MONDO_TMP" = _"/" ]; then
	3126	Die "MONDO_TMP is /, aborting"
	3127	fi
[2092]	3128	mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
[1010]	3129	rmdir $MINDI_TMP
[1486]	3130	export MINDI_TMP=$MONDO_TMP
[953]	3131	mkdir -p $MINDI_TMP
[2238]	3132
[1696]	3133	# This is the scratch dir in mondo - subdir images
[1880]	3134	MINDI_CACHE=$3
[2238]	3135
[925]	3136	kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
[2681]	3137	[ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
	3138
[747]	3139	###
	3140	### Sq-Modification...
	3141	### Attempt to locate kernel specific module path
	3142	### if module path is found then use it other wise use uname -r to set it...
	3143	###
[2629]	3144	if [ $KERNEL_IS_XEN = "yes" ]; then
[2963]	3145	LogIt "INFO: xenkernelpath = $xenkernelpath"
[2629]	3146	fi
[2657]	3147	kernelname=`echo $kernelpath \| cut -d'-' -f2- \| sed 's/.[bg]z[2]*$//'`
[747]	3148	if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
	3149	then
[2963]	3150	LogIt "WARNING: Module path for ${kernelpath} not found..."
	3151	LogIt " using running kernel\'s modules."
[2292]	3152	kernelname=$KERVERRUN
[747]	3153	fi
[2963]	3154	LogIt "INFO: kernelname = $kernelname"
	3155	LogIt "INFO: kernelpath = $kernelpath"
[747]	3156	###
	3157	### end of Sq-Modification
	3158	###
[925]	3159	TAPEDEV=$5
	3160	TAPESIZE=$6
	3161	FILES_IN_FILELIST=$7
	3162	USE_LZO=$8
	3163	CDRECOVERY=$9
[747]	3164	if [ "${10}" = "(null)" ] \|\| [ "${10}" = "" ] ; then
	3165	IMAGE_DEVS=""
	3166	else
	3167	IMAGE_DEVS="`echo "${10}" \| tr '\|' ' '`"
	3168	fi
[925]	3169	if [ "${11}" ] ; then
	3170	LILO_OPTIONS=""
[2963]	3171	# LogIt "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
[925]	3172	fi
	3173	LAST_FILELIST_NUMBER=${12}
[747]	3174	ESTIMATED_TOTAL_NOOF_SLICES=${13}
[2564]	3175	export MINDI_EXCLUDE_DEVS="${14}"
[747]	3176	USE_COMP="${15}"
	3177	USE_LILO="${16}"
[925]	3178	USE_STAR="${17}"
	3179	INTERNAL_TAPE_BLOCK_SIZE="${18}"
[747]	3180	DIFFERENTIAL="${19}"
[998]	3181	USE_GZIP="${20}"
	3182	NOT_BOOT="${21}"
[747]	3183	[ "$USE_COMP" = "" ] && USE_COMP=yes
[998]	3184	[ "$USE_GZIP" = "" ] && USE_GZIP=no
[747]	3185	[ "$NOT_BOOT" = "" ] && NOT_BOOT=no
[2963]	3186	[ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
[1696]	3187	# MONDO_ROOT is the real scratchdir
[1880]	3188	MONDO_ROOT=`echo $MINDI_CACHE \| sed 's/\(.\)\/./\1/'`
[938]	3189	if [ _"$MONDO_ROOT" != _"" ]; then
	3190	mkdir -p $MONDO_ROOT
	3191	else
	3192	Die "MONDO_ROOT is undefined"
	3193	fi
[747]	3194	else
[925]	3195	echo "Syntax: mindi (--custom ....)" >> /dev/stderr
	3196	MindiExit -1
[747]	3197	fi
	3198	fi
[2238]	3199
	3200	if [ _"$MINDI_CACHE" != _"" ]; then
	3201	rm -rf $MINDI_CACHE/* 2> /dev/null
	3202	mkdir -p $MINDI_CACHE
	3203	fi
	3204
[747]	3205	[ "$CDRECOVERY" = "yes" ] \|\| CDRECOVERY=no
	3206
[1684]	3207	if [ _"$MONDO_SHARE" = _"" ]; then
[963]	3208	LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
	3209	LogIt "Latest Mindi is available from http://www.mondorescue.org"
	3210	LogIt "BusyBox sources are available from http://www.busybox.net"
[747]	3211	LogIt "------------------------------------------------------------------------------"
	3212	else
[2963]	3213	LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
[747]	3214	fi
[1005]	3215	if [ -f $MINDI_LIB/rootfs/bin/busybox ]; then
	3216	LogIt "Mindi-`$MINDI_LIB/rootfs/bin/busybox 2>&1 \| head -1`"
	3217	else
[2963]	3218	LogIt "ERROR: Unable to find mindi-busybox, please install it"
[1005]	3219	MindiExit -1
	3220	fi
[747]	3221
	3222	for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
[3014]	3223	modinfo 2> /dev/null 1> /dev/null
	3224	if [ $? -eq 0 ]; then
	3225	modprobe $i 2>&1 > /dev/null
	3226	fi
[747]	3227	done
	3228
	3229	KERN_DISK_MADE=""
	3230
[2963]	3231	LogFile "DIFFERENTIAL = $DIFFERENTIAL"
	3232	LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
	3233	LogFile "NOT_BOOT = '$NOT_BOOT'"
[747]	3234	if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
[2963]	3235	LogIt "INFO: Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
[940]	3236	MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
	3237	MakeMountlist $MINDI_TMP/mountlist.txt
[2432]	3238	CheckMountlist $MINDI_TMP/mountlist.txt
[940]	3239	mkdir -p $MINDI_TMP/small-all/tmp
[2712]	3240	cd "$MINDI_TMP/small-all"
[2092]	3241	cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE \|\| Die "Cannot copy small all.tar.gz"
[2166]	3242	tar -cv ./tmp \| gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log \|\| Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
[747]	3243	sleep 2
[963]	3244	LogIt "Done. Exiting."
[925]	3245	MindiExit 0
[747]	3246	fi
	3247
[1690]	3248	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[2963]	3249	LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
[1684]	3250	fi
	3251
[747]	3252	if [ "$kernelpath" = "" ] ; then
[1335]	3253	[ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
[966]	3254	echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
	3255	read ch
	3256	if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
	3257	USE_OWN_KERNEL="yes"
[1809]	3258	else
	3259	USE_OWN_KERNEL="no"
[747]	3260	fi
	3261	if [ "$USE_OWN_KERNEL" = "yes" ]; then
[925]	3262	YOUR_KERNEL_SUCKS=""
	3263	kernelpath=`TryToFindKernelPath`
	3264	if [ "$kernelpath" = "" ] ; then
	3265	echo -n "Please enter kernel path : "
	3266	read kernelpath
	3267	fi
[747]	3268	else
[925]	3269	YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
[747]	3270	fi
	3271	fi
	3272	if [ "$YOUR_KERNEL_SUCKS" != "" ] \|\| [ "$kernelpath" = "" ] \|\| [ "$kernelpath" = "SUCKS" ] \|\| [ "$kernelpath" = "FAILSAFE" ] ; then
[1885]	3273	# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
	3274	if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ]; then
	3275	source $MINDI_LIB/FindDistroFailsafe
	3276	# Log kernel image
[2963]	3277	LogIt "INFO: FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
[1885]	3278	kernelpath="$FAILSAFE_KBIN"
[2963]	3279	LogIt "INFO: I shall include a failsafe kernel, not your kernel, in the boot disks."
	3280	LogIt " The failsafe kernel is $kernelpath."
	3281	LogIt " However, you are still running your kernel. If Mindi fails to create your"
	3282	LogIt " disks then it may still be a result of a problem with your kernel."
[1885]	3283	pwd=`pwd`
[2712]	3284	cd "$MINDI_TMP"
[1885]	3285	mkdir -p lib/modules
	3286	cp -a "/lib/modules/$FAILSAFE_KVER" "lib/modules/$FAILSAFE_KVER" \|\| Die "Cannot copy kernel modules."
[2712]	3287	cd "$pwd"
[1885]	3288	else
	3289	kernelpath=$MINDI_LIB/vmlinuz
[2963]	3290	LogIt "INFO: I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
	3291	LogIt " However, you are still running your kernel. If Mindi fails to create your"
	3292	LogIt " disks then it may still be a result of a problem with your kernel."
[1885]	3293	pwd=`pwd`
[2712]	3294	cd "$MINDI_TMP"
[1885]	3295	bzip2 -dc $MINDI_LIB/lib.tar.bz2 \| tar -x \|\| Die "Cannot unzip lib.tar.bz2"
[2712]	3296	cd "$pwd"
[1885]	3297	fi
[747]	3298	YOUR_KERNEL_SUCKS="Your kernel sucks"
	3299	fi
[1880]	3300	echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
[2963]	3301	[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
[747]	3302
[965]	3303	[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it.\nGo to http://www.mondorescue.org and download it, then install it."
[747]	3304
[1983]	3305	PrepareDataDiskImages
	3306
[747]	3307	ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
	3308	rds=$(($ramdisk_size-$((ramdisk_size%4096))))
[1983]	3309	export ramdisk_size=$rds
[747]	3310
[2963]	3311	LogFile "INFO: Ramdisk will be $ramdisk_size KB"
[1567]	3312	if [ "$ARCH" = "ia64" ] ; then
[1983]	3313	PrepareBootDiskImage_LILO $kernelpath \|\| Die "Failed to create ia64 image disk image."
[1567]	3314	else
[3072]	3315	PrepareBootDiskImage_ISOLINUX $kernelpath \|\| Die "Failed to create $ramdisk_size KB disk image."
[747]	3316	fi
	3317
	3318	[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
	3319	...Or type 'memtest' to test your PC's RAM thoroughly.\n"
	3320
[1684]	3321	if [ _"$MONDO_SHARE" = _"" ]; then
[1983]	3322	ListImagesForUser
	3323	OfferToMakeBootableISO
[1684]	3324	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
[1983]	3325	OfferToMakeBootableUSB
[1684]	3326	fi
[747]	3327	elif [ "$TAPEDEV" ] ; then
[2078]	3328	if [ "$ARCH" != "ia64" ] ; then
	3329	# We need to keep the img file as boot file for ia64 platform
	3330	rm -f $MINDI_CACHE/{img,iso}
	3331	else
	3332	rm -f $MINDI_CACHE/*iso
	3333	fi
[1898]	3334	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	3335	OfferToMakeBootableUSB
[1898]	3336	fi
[1983]	3337	OfferToMakeBootableISO
[1880]	3338	if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
	3339	cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
[747]	3340	else
[925]	3341	Die "Cannot find all.tar.gz, to be written to tape"
[747]	3342	fi
[1695]	3343	elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	3344	OfferToMakeBootableUSB
[747]	3345	else
[1983]	3346	OfferToMakeBootableISO
[747]	3347	fi
	3348	# cleanup
[2995]	3349	LogIt "INFO: $FRIENDLY_OUTSTRING"
[747]	3350	for mtpt in $FLOPPY_WAS_MOUNTED ; do
	3351	mount $mtpt
	3352	done
[925]	3353	MindiExit 0

Note: See TracBrowser for help on using the repository browser.

Download in other formats: