Context Navigation

source: MondoRescue/branches/2.2.9/mindi/rootfs/sbin/init@ 2437

Visit:

Last change on this file since 2437 was 2437, checked in by Bruno Cornec, 16 years ago
Fix udev support in init for Mandriva 2009.1 (udevadm settle is blocking)
Property svn:keywords set to `Id`
File size: 23.9 KB

Rev	Line
[1]	1	#!/bin/sh
	2	#
[736]	3	# $Id: init 2437 2009-09-29 08:41:56Z bruno $
[1]	4	#
[736]	5	# init script launched during the restore process
[1]	6	#------------------------------------------------------------
	7
	8
	9	CaughtSoftReset() {
[1747]	10	trap SIGTERM
	11	reboot
[1]	12	}
	13
	14
	15	ConfigureLoggingDaemons() {
[1747]	16	echo -en "Running klogd..."
	17	klogd -c 2 > /dev/null 2> /dev/null
	18	echo -en "Done.\nRunning syslogd..."
	19	syslogd > /dev/null 2> /dev/null
	20	echo "Done."
	21	LogIt "klogd and syslogd have been started."
[1]	22	}
	23
	24
	25
	26	CopyBootDevEntry() {
[1747]	27	local outfile devfile
	28	devfile=/dev/boot_device
	29	outfile=`cat /BOOTLOADER.DEVICE 2> /dev/null`
	30	[ ! "$outfile" ] && return 0
	31	echo -en "Copying boot device to $outfile..."
	32	if [ -e "$outfile" ] ; then
[2174]	33	echo "not needed."
[1410]	34	return 0
[1747]	35	fi
	36	mkdir -p $outfile
	37	rmdir $outfile
	38	cp -pRdf $devfile $outfile
	39	if [ "$?" -ne "0" ] ; then
[1410]	40	echo "Failed."
	41	return 1
[1747]	42	else
[1410]	43	echo "OK."
	44	return 0
[1747]	45	fi
[1]	46	}
	47
	48
	49
	50	Die() {
[1747]	51	LogIt "Fatal error! $1" 1
	52	exit 1
[1]	53	}
	54
	55
	56
	57	ExtractDevTarballs() {
[1747]	58	cd /
	59	for fname in ataraid.tgz ida.tgz i2o.tgz rd.tgz raw.tgz cciss.tgz nst.tgz dm.tgz vc.tgz ; do
	60	if [ ! -e "/$fname" ] ; then
	61	LogIt "/$fname not found; cannot extract to /." 1
	62	else
	63	echo -en "\rExtracting /$fname... "
	64	tar -zxf /$fname \|\| LogIt "Error occurred while extracting /$fname"
	65	fi
	66	done
	67	echo -en "\r"
	68	LogIt "Extracted additional /dev entries OK. " 1
[1]	69	}
	70
	71
	72
	73	LaunchTerminals() {
[1747]	74	openvt 2 /bin/sh
	75	openvt 3 /bin/sh
	76	openvt 4 /bin/sh
	77	openvt 5 /bin/sh
	78	openvt 6 /bin/sh
	79	openvt 7 /bin/sh /sbin/wait-for-petris
[1804]	80	openvt 8 /usr/bin/tail -f $LOGFILE
[1922]	81	# May avoid shell error messages
	82	chmod 666 /dev/tty* /dev/console
[2158]	83	if [ "$ARCH" = "ia64" ]; then
	84	# Required to have a correct terminal or serial console support
	85	ln -s -f /dev/ttyS0 /dev/tty
	86	fi
[1]	87	}
	88
	89
	90	LoadKeymap() {
[1747]	91	local fname
	92	fname=`cat /tmp/KEYMAP-LIVES-HERE 2> /dev/null`
	93	[ "$fname" = "" ] && return
	94	if which loadkeys > /dev/null 2> /dev/null ; then
	95	loadkeys $fname
[1]	96	# loadkmap != loadkeys
	97	# elif which loadkmap > /dev/null 2> /dev/null ; then
	98	# loadkmap < $fname
[1747]	99	else
	100	LogIt "Using default keyboard map." 1
	101	fi
[1]	102	}
	103
	104
	105	UntarTapeStuff() {
[1747]	106	local old_pwd res
	107	old_pwd=`pwd`
	108	cd $GROOVY
	109	[ "$1" != "" ] && tapedev=$1
[1983]	110	[ ! "$tapedev" ] && tapedev=`grep media-dev /tmp/mondo-restore.cfg 2>/dev/null \| tr -s ' ' ' ' \| cut -d' ' -f2`
[1962]	111	mt -f $tapedev rewind
[1958]	112	mt -f $tapedev fsf 2
[1747]	113	dd if=$tapedev bs=32k count=1024 \| tar -zx
	114	res=$?
	115	if [ "$res" -eq "0" ] ; then
[1958]	116	# Store the dev name in case we changed it interactively
[1983]	117	if [ -f "/tmp/mondo-restore.cfg" ]; then
	118	sed -i "s/^media-dev .*$/media-dev $tapedev/" /tmp/mondo-restore.cfg
	119	fi
[1747]	120	fi
	121	cd $old_pwd
	122	return $res
[1]	123	}
	124
	125	HandleTape() {
[1747]	126	local res tapedev
	127	tapedev="" ; # will be set by UntarTapeStuff()
[1963]	128
[1968]	129	# Here we can add the USB storage module, it's working even with OBDR !
[1963]	130	modprobe -q usb-storage
[1968]	131	# Tape takes some time to appear
	132	sleep 10
[1747]	133	cd $GROOVY
[1958]	134	UntarTapeStuff $tapedev
[1747]	135	res=$?
	136	while [ "$res" -ne "0" ] ; do
	137	LogIt "$tapedev failed to act as extended data disk for booting." 1
	138	LogIt "Please specify an alternate tape device," 1
[1885]	139	LogIt "or hit <Enter> to boot from another media." 1
[1747]	140	echo -en "---> "
	141	read tapedev
	142	if [ "$tapedev" ] ; then
	143	LogIt "User specified $tapedev instead"
	144	UntarTapeStuff $tapedev
	145	res=$?
	146	else
	147	LogIt "User opted not to specify an alternate tapedev"
	148	res=1
[1]	149	break
[1747]	150	fi
	151	done
[1962]	152	# For post-init
	153	export TAPEDEV=$tapedev
[1]	154
[1747]	155	if [ "$res" -ne "0" ] ; then
[1410]	156	cd /
[1885]	157	LogIt "Failed to use tape as extended datadisk. Reverting to another media." 1
	158	HandleCDROM
[1410]	159	res=$?
[1747]	160	else
[1410]	161	LogIt "Using tape as extended datadisk. Good." 3
	162	echo "Using tape as extd ddisk." > /tmp/TAPEDEV-HAS-DATA-DISKS
	163	res=0
[1747]	164	CD_MOUNTED_OK=yes
	165	fi
	166	return $res
[1]	167	}
	168
	169
	170
[1885]	171	HandleCDROM() {
[1825]	172	# Just in case we have an iLO ensure we will map it correctly
[1830]	173	echo "$DENY_MODS" \| grep -q "usb-storage "
[1829]	174	if [ $? -eq 0 ]; then
	175	return
	176	fi
[1826]	177	echo "Activating a potential USB Storage device"
[1922]	178	modprobe -q usb-storage
[1826]	179	for i in 1 2 3 4 5 6 7 8 9 10 ; do
	180	sleep 1
	181	echo -en "."
	182	done
[1825]	183
[1747]	184	find-and-mount-cdrom
	185	res=$?
	186	if [ "$res" -ne "0" ] ; then
[898]	187	LogIt "First call to find-and-mount-cdrom failed." 1
	188	LogIt "Sleeping for 3 seconds and trying again." 1
	189	sleep 3
	190	find-and-mount-cdrom
	191	res=$?
[1747]	192	fi
	193	if [ "$res" -eq "0" ] ; then
[898]	194	LogIt "OK, I am running on a CD-ROM. Good." 3
[1747]	195	CD_MOUNTED_OK=yes
	196	else
[1885]	197	LogIt "You probably not have the right drivers" 3
	198	LogIt "to support the hardware on which we are running" 3
	199	LogIt "Your archives are probably fine but" 3
	200	LogIt "your tape streamer and/or CD-ROM drive are unsupported at that point." 3
[898]	201	CD_MOUNTED_OK=""
[1747]	202	fi
	203	return 0
[1]	204	}
	205
	206
	207	PauseForRaids() {
[1747]	208	if [ "`dmesg \| grep -i "RAID Controller"`" != "" ] \|\| [ "`dmesg \| grep -i "Vendor: 3ware"`" != "" ] ; then
	209	LogIt "RAID controller(s) detected. Pausing 10 seconds to let them warm up." 1
	210	echo -en "Pausing..."
	211	for i in 1 2 3 4 5 6 7 8 9 10 ; do
	212	sleep 1
	213	echo -en "$(($i*10))%..."
	214	done
	215	echo "Done."
	216	fi
[1]	217	}
	218
	219
	220	# 06/13/2002 --- DuckX's & Hugo's new routine
	221	# 10/11/2003 --- added a simple devfsd.conf file
	222	# 01/24/2005 --- cater for arbitrary locations of devfsd.conf by using the
	223	# config file path compiled into devfsd
	224	RunDevfsd() {
[1747]	225	loc=`which devfsd 2> /dev/null`
	226	if [ "$loc" != "" ] ; then
[1]	227	LogIt "Devfs found. Testing kernel support..."
	228	if [ ! -e "/dev/.devfsd" ] ; then
[746]	229	mount -t devfs devfs /dev 2>> $LOGFILE
[1747]	230	if [ "$?" -ne "0" ] ; then
[1]	231	LogIt "Error while trying to mount devfs"
	232	else
	233	LogIt "Devfs mounted OK"
	234	fi
	235	fi
	236	#check if the kernel supports devfs
	237	if [ -e "/dev/.devfsd" ] ; then
	238	[ -d "/proc/1" ] \|\| mount -n /proc
	239	LogIt "Kernel support found. Creating config file and starting devfsd"
[911]	240	conffile=`strings $loc \| grep -E "devfsd.conf$"`
[1]	241	[ "$conffile" ] \|\| conffile="/etc/devfsd.conf"
	242	confpath=`echo $conffile \| sed "s/\/devfsd\.conf$//"`
	243	[ -d "$confpath" ] \|\| mkdir -p $confpath
	244	echo -en "REGISTER .* MKOLDCOMPAT\nUNREGISTER .* RMOLDCOMPAT\n" > $conffile
	245	devfsd /dev &
	246	sleep 5
	247	else
	248	LogIt "No devfs kernel support."
	249	fi
[1747]	250	fi
[1]	251	}
	252
[1718]	253	# Taken from udev management in Mandriva 2008.0. Kudos guys
	254	make_extra_nodes () {
	255	# there are a few things that sysfs does not export for us.
	256	# these things are listed in /etc/udev/links.conf
	257	grep '^[^#]' /etc/udev-links.conf \| \
	258	while read type name arg1; do
	259	[ "$type" -a "$name" -a ! -e "/dev/$name" -a ! -L "/dev/$name" ] \|\|continue
	260	case "$type" in
	261	L) ln -s $arg1 /dev/$name ;;
	262	D) mkdir -p /dev/$name ;;
[1719]	263	M) mknod /dev/$name $arg1 && chmod 600 /dev/$name;;
	264	*) echo "udev-links.conf: unparseable line (%s %s %s)\n" "$type" "$name" "$arg1" ;;
[1718]	265	esac
	266	done
	267	}
	268
[1792]	269	create_dev_makedev() {
	270	if [ -e /sbin/MAKEDEV ]; then
	271	ln -sf /sbin/MAKEDEV /dev/MAKEDEV
	272	else
	273	ln -sf /bin/true /dev/MAKEDEV
	274	fi
	275	}
[1718]	276
[1716]	277	RunUdevd() {
[1718]	278	# Inspiration from Mandriva 2008.0 startup script
	279	echo "Preparing udev environment..."
	280	mv /dev /dev.static
	281	mkdir /dev
	282	mount -n -o size=5M,mode=0755 -t tmpfs none /dev
	283	make_extra_nodes
	284	mount -n -t devpts -o mode=620 none /dev/pts
	285	mount -n -t tmpfs none /dev/shm
[1789]	286	if [ -e /proc/sys/kernel/hotplug ]; then
	287	echo > /proc/sys/kernel/hotplug
	288	fi
[1734]	289	PKLVL=`cut -f1 /proc/sys/kernel/printk`
	290	echo 0 > /proc/sys/kernel/printk
[2081]	291	# Many possibilities depending on udev versions
[1759]	292	if [ -x /sbin/startudev ]; then
	293	/sbin/startudev
	294	fi
[2081]	295	if [ -x /sbin/start_udev ]; then
	296	/sbin/start_udev
	297	fi
[1759]	298	# Depending on udevd version it gives back the hand or not :-(
[2437]	299	ps \| grep udevd 2> /dev/null 1> /dev/null
	300	if [ $? -ne 0 ]; then
	301	/sbin/udevd --daemon &
	302	echo "Waiting for udev to start..."
	303	sleep 5
	304	fi
[1792]	305	mkdir -p /dev/.udev/queue/
[1789]	306	if [ -x /sbin/udevtrigger ]; then
	307	/sbin/udevtrigger
	308	fi
[1792]	309	create_dev_makedev
[2182]	310	# Newer version use udevadm for that
[2437]	311	if [ -x /sbin/udevsettle ]; then
[1816]	312	/sbin/udevsettle
[2437]	313	elif [ -x /sbin/udevadm ]; then
	314	/sbin/udevadm trigger
	315	/sbin/udevadm settle --timeout=10 &
	316	echo "Waiting for udev to discover..."
	317	sleep 10
[1816]	318	fi
[1824]	319	# It seems we need to have more static devs on some distro were
	320	# udev as some other requirements to be covered later on.
	321	# So in the mean time:
	322	for d in `ls /dev.static`; do
	323	if [ ! -e /dev/$d ]; then
	324	mv /dev.static/$d /dev
	325	fi
	326	done
[1816]	327	echo $PKLVL > /proc/sys/kernel/printk
[1716]	328	}
[1]	329
[1761]	330	RstHW() {
[1]	331
[1761]	332	# Restore the HW configuration if available (NOT by default)
	333	answer="NO"
[1]	334
[1815]	335	grep -q nohw /proc/cmdline
	336	if [ "$?" -eq 0 ]; then
	337	return
	338	fi
[1761]	339	if [ -x ./mindi-rsthw ]; then
	340	grep -q RESTORE /proc/cmdline
	341	if [ "$?" -ne 0 ]; then
[1815]	342	#clear
[1761]	343	echo "*********************************************************************"
	344	echo "Do you want to restore the HW configuration of the original machine ?"
	345	echo "(This may dammage your hardware so be sure to check twice before saying yes)"
	346	echo "*********************************************************************"
	347	echo "Please confirm by typing YES exactly as written here (NO by default)"
	348	echo -n "--> "
	349	read answer
	350	else
	351	answer="YES"
	352	fi
[1910]	353	if [ "$answer" = "YES" ] ; then
[1761]	354	./mindi-rsthw
	355	fi
	356	fi
	357	}
[1]	358
[1761]	359
[1]	360	#RunDevfsd() {
	361	# loc=`which devfsd 2> /dev/null`
	362	# if [ "$loc" != "" ] ; then
	363	# LogIt "Starting devfsd"
	364	# devfsd /dev &
	365	# sleep 5
	366	# fi
	367	#}
	368
	369
	370
[1787]	371	StartUSBKbd() {
	372	# Prepare minimal USB env in case we have USB kbd such as with iLO
	373	[ -d /proc/bus/usb ] && ! grep -q /proc/bus/usb /proc/mounts && mount -t usbfs none /proc/bus/usb
[1830]	374	echo "$DENY_MODS" \| grep -Eq 'uhcd_hci \|usbhid \|usbcore '
[1829]	375	if [ $? -eq 0 ]; then
	376	return
	377	fi
[1922]	378	modprobe -q uhcd_hci
	379	modprobe -q usbhid
[1787]	380	}
[1]	381
	382
[1787]	383
[1]	384	StartLvms() {
[1747]	385	if [ -e "/tmp/i-want-my-lvm" ] ; then
	386	LogIt "Scanning LVM's..." 1
[739]	387	if which lvm ; then
[1922]	388	modprobe -q dm-mod
	389	modprobe -q dm_mod
[739]	390	lvm vgscan --mknodes
	391	else
	392	vgscan
	393	fi
[1747]	394	grep -E "^#.vgchange" /tmp/i-want-my-lvm \| sed "s/^#[ ]//" > /tmp/start-lvm
	395	chmod +x /tmp/start-lvm
	396	echo -en "Starting LVM's..."
	397	/tmp/start-lvm &
	398	for i in 1 2 3 4 5 ; do
[1410]	399	echo -en "."
	400	sleep 1
[1747]	401	done
	402	echo "Done."
	403	fi
[1]	404	# If necessary, cannibalize 'analyze-my-lvm'; copy some of its code here,
	405	# pipe vgscan's output, strip it, run 'vgchange' on its output, etc.etc.
[1747]	406	LogIt "LVM's have been started."
[1]	407	}
	408
[2177]	409	StartPowerPath() {
[1]	410
[2177]	411	# Taken from the init script of EMC PowerPath on RHEL
	412	if [ -f /etc/emcp_devicesDB.dat ]; then
	413	if [ -f /etc/emcp_devicesDB.idx ]; then
	414	/etc/opt/emcpower/emcpmgr map -p > /dev/null 2>&1
	415	fi
	416	fi
	417
	418	/sbin/powermt config > /dev/null 2>&1
	419	# Wait for udev to finish creating emcpower devices
	420	#
	421	pdfound=1
	422	for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15; do
	423	pdfound=1
	424	for pd in `/bin/ls -d /sys/block/emcpower* 2> /dev/null`; do
	425	bpd=`basename $pd`
	426	if [ ! -e /dev/$bpd ]; then
	427	pdfound=0
	428	sleep 2
	429	break;
	430	fi
	431	done
	432	if [ "$pdfound" -eq 1 ]; then
	433	break
	434	fi
	435	done
	436	if [ "$pdfound" -eq 0 ]; then
	437	echo "Unable to start PowerPath"
	438	fi
	439
	440	/sbin/powermt load > /dev/null 2>&1
	441	/etc/opt/emcpower/emcpmgr map > /dev/null 2>&1
	442	/etc/opt/emcpower/powercf -C > /dev/null 2>&1
	443	if [ ! -e /etc/powermt.custom ]; then
	444	/sbin/powermt save > /dev/null 2>&1
	445	fi
	446	/sbin/powermt register > /dev/null 2>&1
	447	/sbin/powermig transition -startup -noprompt > /dev/null 2>&1
	448	}
	449
[2072]	450	StartMpath() {
	451	if [ "`grep -i nompath /proc/cmdline`" ]; then
	452	return;
	453	fi
[2353]	454	if [ "`grep mpath /tmp/mountlist.txt`" ]; then
	455	if [ -x /sbin/multipath ]; then
	456	echo "Starting Mpath..."
	457	mkdir -p /var/lib/multipath
	458	cat > /etc/multipath.conf << EOF
[2072]	459	defaults {
	460	user_friendly_names yes
	461	}
	462	EOF
[2353]	463	/sbin/multipath -v 0
	464	if [ -x /sbin/kpartx ]; then
	465	/sbin/dmsetup ls --target multipath --exec "/sbin/kpartx -a -p p"
	466	fi
[2072]	467	fi
	468	fi
	469	}
	470
[1]	471	StartRaids() {
[1747]	472	local raid_devices i
[1273]	473
[2353]	474	if [ "`grep -i noraid /proc/cmdline`" ]; then
	475	return;
	476	fi
	477
[1747]	478	raid_devices=`grep /dev/md /tmp/mountlist.txt \| cut -d' ' -f1`
[623]	479	if which raidstart > /dev/null 2> /dev/null ; then
[1747]	480	for i in $raid_devices ; do
	481	if grep `basename $i` /proc/mdstat > /dev/null 2> /dev/null ; then
	482	LogIt "$i is started already; no need to run 'raidstart $i'" 1
	483	else
[623]	484	LogIt "Running 'raidstart $i'" 1
	485	raidstart $i
[1747]	486	fi
	487	done
[623]	488	elif which mdrun > /dev/null 2> /dev/null ; then
[2353]	489	if [ "`grep -i nomd /proc/cmdline`" ]; then
	490	return;
	491	fi
[623]	492	LogIt "Running 'mdrun'" 1
	493	mdrun
[1273]	494	elif which mdadm > /dev/null 2> /dev/null ; then
[2353]	495	if [ "`grep -i nomd /proc/cmdline`" ]; then
	496	return;
	497	fi
[1273]	498	LogIt "Running 'mdadm'" 1
	499	for i in $raid_devices ; do
[1747]	500	if grep `basename $i` /proc/mdstat > /dev/null 2> /dev/null ; then
	501	LogIt "$i is started already; no need to run 'mdadm $i'" 1
	502	else
[1610]	503	if [ -f /etc/mdadm.conf ] ; then
	504	LogIt "Running 'mdadm $i' with user supplied /etc/mdadm.conf" 1
	505	mdadm -A $i -c /etc/mdadm.conf
	506	elif [ -f /etc/mdadm/mdadm.conf ] ; then
	507	LogIt "Running 'mdadm $i' with user supplied /etc/mdadm/mdadm.conf" 1
	508	mdadm -A $i -c /etc/mdadm/mdadm.conf
	509	else
	510	LogIt "Running 'mdadm $i'" 1
	511	mdadm -Ac partitions -m dev $i
	512	fi
[1747]	513	fi
	514	done
[2075]	515	elif which dmraid > /dev/null 2> /dev/null ; then
[2072]	516	if [ "`grep -i nodmraid /proc/cmdline`" ]; then
	517	return;
	518	fi
	519	for x in $(/sbin/dmraid -ay -i -p -t 2>/dev/null \| grep -E -iv "^no " \|awk -F ':' '{ print $1 }') ; do
	520	echo "Please send the result of /sbin/dmraid -ay -i -p -t to the devteam !!!"
	521	return
	522	#dmname=$(resolve_dm_name $x)
	523	#[ -z "$dmname" ] && continue
	524	#/sbin/dmraid -ay -i -p "$dmname" >/dev/null 2>&1
	525	#/sbin/kpartx -a -p p "/dev/mapper/$dmname"
	526	done
[623]	527	else
	528	LogIt "Warning: Neither 'raidstart' nor 'mdrun''found. RAID devices may not have started." 1
	529	fi
	530
[1]	531	}
	532
	533
	534	TryAgainToFindCD() {
[1747]	535	local res
	536	mount \| grep /mnt/cdrom && return 0
[1983]	537	[ "`grep "backup_media_type" /tmp/mondo-restore.cfg 2> /dev/null \| grep "cdstream"`" ] && return
[1747]	538	LogIt "Trying to mount CD-ROM a 2nd time..."
	539	find-and-mount-cdrom --second-try
	540	res=$?
	541	if [ "$res" -eq "0" ] ; then
	542	CD_MOUNTED_OK=yes
	543	LogIt "CD-ROM drive mounted successfully." 1
	544	else
	545	LogIt "I still cannot find or mount the CD-ROM drive, by the way."
	546	fi
[1]	547	}
	548
	549
	550
	551	UseTmpfs()
	552	{
[1747]	553	local mount_cmd
	554	echo -en "Mounting /tmp/tmpfs..."
	555	mkdir -p /tmp/tmpfs
[1]	556	# For technical reasons, some sets are as large as 16MB.
	557	# I am allowing 32MB because selective restore occupies a lot of space.
[2212]	558	for size in 128m 64m 48m 40m 32m ; do
[1747]	559	mount_cmd="mount /dev/shm -t tmpfs -o size=$size" ; # was 34m until 04/2003
	560	LogIt "Trying '$mount_cmd'"
	561	$mount_cmd /tmp/tmpfs 2>> $LOGFILE
	562	res=$?
	563	[ "$res" -eq "0" ] && break
	564	done
	565	if [ "$res" -ne "0" ] ; then
	566	LogIt "Failed. I could not run '$mount_cmd /tmp/tmpfs'. Your kernel is BROKEN or you do not have enough RAM." 1
	567	umount /tmp/tmpfs > /dev/null 2> /dev/null
	568	rmdir /tmp/tmpfs
	569	ln -sf /mnt/RESTORING/tmp /tmp/tmpfs; # used by mondo-restore
	570	LogIt "Failed to mount /tmp/tmpfs; using ugly softlink instead"
	571	else
	572	LogIt "Great. Pivot succeeded w/ size=$size" 1
	573	echo -en "Pivoting /tmp..."
	574	umount /tmp/tmpfs
	575	mkdir -p /tmp.old
[1752]	576	mv /tmp/* /tmp.old/
	577	# Try to Deal with a busybox bug on inexistant links
[1747]	578	cp /tmp/* /tmp.old/
	579	rm -f /tmp/*
	580	$mount_cmd /tmp
[1752]	581	mv /tmp.old/* /tmp/
	582	# Try to Deal with a busybox bug on inexistant links
[1747]	583	cp /tmp.old/* /tmp/
	584	rm -rf /tmp.old
	585	mkdir -p /tmp/tmpfs
	586	mkdir -p $GROOVY
[1]	587	echo "Done."
	588	LogIt "Successfully mounted dynamic /tmp ramdisk"
	589	# mkdir -p /tmp/tmpfs/var
	590	# mv -f /var/log /tmp/tmpfs/var/log
	591	# ln -sf /tmp/tmpfs/var/log /var/log
[1747]	592	fi
[1]	593	}
	594
	595
	596	WelcomeMessage()
	597	{
[1747]	598	echo "********************************************************************"
	599	echo "MINDI-LINUX by Mondo Dev Team - web site: http://www.mondorescue.org"
	600	echo "Boot disk based on AlfaLinux & Trinux. BusyBox by Erik Andersen."
[1]	601	which petris > /dev/null 2> /dev/null && echo "Petris was written by Peter Seidler <p.seidler@mail1.stofanet.dk>."
[1747]	602	echo "Executables and source code are covered by the GNU GPL. No warranty."
	603	echo "running on $ARCH"
	604	echo "********************************************************************"
[1]	605	}
	606
	607
	608	EnableCcissIfAppropriate() {
[1747]	609	local i fname
	610	for i in 0 1 2 3 ; do
[1410]	611	fname="/proc/driver/cciss/cciss$i"
	612	if [ -e "$fname" ] ; then
	613	LogIt "Engaging $fname"
	614	echo "engage scsi" > $fname
	615	LogIt "...result=$?"
	616	fi
[1747]	617	done
[1]	618	}
	619
[1802]	620	ModprobeAllModules() {
[1]	621
[1922]	622	for m in `find /lib/modules -name '\.ko' -o -name '\.o'`; do
[1927]	623	k=`basename $m \| sed 's/\.ko.*$//'`
	624	j=`basename $k \| sed 's/\.o.*$//'`
[1830]	625	echo "$DENY_MODS" \| grep -q "$j "
[1829]	626	if [ $? -eq 0 ]; then
[1830]	627	echo "Denying $j..."
[1829]	628	continue
	629	fi
	630	echo "Probing $j..."
[1815]	631	modprobe -q $j
[1802]	632	done
	633	}
	634
[287]	635	ExtractDataDisksAndLoadModules() {
	636	echo "Installing additional tools ..."
	637	install-additional-tools
[1800]	638	# Keep the kernel silent again
	639	PKLVL=`cut -f1 /proc/sys/kernel/printk`
[1802]	640	echo 0 > /proc/sys/kernel/printk
[1922]	641	ModprobeAllModules
[1800]	642	echo $PKLVL > /proc/sys/kernel/printk
[2081]	643
	644	# Retry failed udev events now that local filesystems are mounted read-write
	645	# (useful for rules creating network ifcfg files)
	646	if [ -e "/tmp/USE-UDEV" ] ; then
	647	if [ -x /sbin/udevadm ]; then
	648	/sbin/udevadm trigger --retry-failed
	649	fi
	650	fi
[287]	651	}
[1]	652
	653	# ------------------------ main -----------------------
	654
[1698]	655	MINDI_VER=PBVER
	656	MINDI_REV=PBREV
[1]	657	trap CaughtSoftReset SIGTERM
[1643]	658	LOGFILE=/var/log/mondorestore.log
[1236]	659	PATH=/bin:/usr/bin:/sbin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/mondo:/usr/games
[1]	660	GROOVY=/tmp/groovy-stuff
	661	USER=root
[2163]	662	ARCH=`uname -m`
[1]	663
[2163]	664	export PATH GROOVY USER LOGFILE ARCH
	665
[1716]	666	echo "Welcome to init (from mindi ${MINDI_VER}-r${MINDI_REV})"
[898]	667
[1]	668	mount -o remount rw /
	669	[ ! "$GROOVY" ] && Die "I'm not groovy!"
[1885]	670	for i in $GROOVY /mnt/cdrom /mnt/isodir /var/local/petris /tmp/isodir; do
[1747]	671	mkdir -p $i
[1]	672	done
	673	#/bin/update
	674	mount /proc/ /proc -v -t proc
	675	mkdir /sys 2> /dev/null
	676	mount /sys/ /sys -v -t sysfs 2>> $LOGFILE
[1824]	677	# For ESX 3
	678	[ -d /proc/vmware ] && ! grep -q /vmfs /proc/mounts && mount -t vmfs /vmfs /vmfs
[1]	679	rm -f /foozero
	680
[1829]	681	if [ "`grep -i denymods /proc/cmdline`" ]; then
	682	export DENY_MODS="`cat /proc/cmdline \| sed 's~.denymods=\"\(.\)\".*~\1~'` mondonone"
[1830]	683	else
	684	export DENY_MODS=" "
[1829]	685	fi
[1983]	686	if [ "`grep -i 'obdr ' /tmp/mondo-restore.cfg 2> /dev/null`" ]; then
[1958]	687	# Do not try to load usb storage when dealing with OBDR it makes the modprobe hang :-(
[1960]	688	export DENY_MODS="usb-storage $DENY_MODS"
[1958]	689	fi
[1829]	690	if [ "`grep -i forcemods /proc/cmdline`" ]; then
	691	export FORCE_MODS="`cat /proc/cmdline \| sed 's~.forcemods=\"\(.\)\".*~\1~'` mondonone"
[1830]	692	else
	693	export FORCE_MODS=" "
[1829]	694	fi
	695
[1826]	696	echo "Activating a potential USB keyboard/mouse"
[1787]	697	StartUSBKbd
	698
[1720]	699	if [ -f /proc/sys/kernel/exec-shield ]; then
	700	echo 0 > /proc/sys/kernel/exec-shield 2>> /dev/null
	701	fi
[1]	702
[1729]	703	if [ -f /proc/modules ]; then
	704	echo "/sbin/modprobe" > /proc/sys/kernel/modprobe
	705	fi
	706
[1716]	707	if [ -e "/tmp/USE-UDEV" ] ; then
[1747]	708	RunUdevd
[1716]	709	fi
[1798]	710	ExtractDevTarballs
[1]	711	LaunchTerminals
[1718]	712
[1789]	713	# Keeping kernel silent for module insertion
	714	PKLVL=`cut -f1 /proc/sys/kernel/printk`
	715	echo 0 > /proc/sys/kernel/printk
[1922]	716	ModprobeAllModules
[1789]	717	echo $PKLVL > /proc/sys/kernel/printk
[1718]	718
[1]	719	EnableCcissIfAppropriate
	720	#-------------------------------
	721	#WHOLIVESINAPINEAPPLEUNDERTHESEA#;# --- don't touch this :)
	722	#-------------------------------
	723	UseTmpfs
	724	if [ ! -e "/tmp/mondo-restore.cfg" ] ; then
[1747]	725	LogIt "Warning - /tmp/mondo-restore.cfg not found"
[1]	726	fi
[2182]	727	if [ "`grep -i pxe /proc/cmdline`" ] \|\| [ "`grep -i net /proc/cmdline`" ]; then
[2380]	728	# We need to get here exported variables from start-netfs
	729	. /sbin/start-netfs
[2182]	730	fi
[1]	731
[1983]	732	if [ "`grep -i 'obdr ' /tmp/mondo-restore.cfg 2>/dev/null`" ] \|\| [ "`grep -i ' udev' /tmp/mondo-restore.cfg 2>/dev/null`" ]; then
[1747]	733	HandleTape
[287]	734	ExtractDataDisksAndLoadModules
[737]	735	elif [ "`grep -i pxe /proc/cmdline`" ]; then
[287]	736	# Simulate a local CD
	737	echo "/mnt/cdrom" > /tmp/CDROM-LIVES-HERE
[1747]	738	CD_MOUNTED_OK=yes
[287]	739	ExtractDataDisksAndLoadModules
[2182]	740	# Fake the conf file to force it to NFS mode, even if we made originally a CD (mandatory for mondorestore to work correctly)
[2380]	741	sed -i "s/backup-media-type.*/backup-media-type netfs/" /tmp/mondo-restore.cfg
[1983]	742	elif [ "`grep -i usb= /proc/cmdline`" ] \|\| [ "`grep -i usb /tmp/mondo-restore.cfg 2>/dev/null \| grep media-type`" ]; then
[1747]	743	. /sbin/start-usb
[1698]	744
	745	# Simulate a local CD
	746	echo "/mnt/cdrom" > /tmp/CDROM-LIVES-HERE
[1747]	747	CD_MOUNTED_OK=yes
[1698]	748	ExtractDataDisksAndLoadModules
[1]	749	else
[1885]	750	HandleCDROM
[287]	751	ExtractDataDisksAndLoadModules
[2380]	752	# We need to get here exported variables from start-netfs
	753	. /sbin/start-netfs
[1]	754	fi
	755	res=$?
	756	ConfigureLoggingDaemons
	757	if [ -e "/tmp/USE-DEVFS" ] ; then
[1747]	758	umount /mnt/cdrom 2> /dev/null
	759	mv /dev/cdrom /cdrom.lnk 2> /dev/null
	760	CD_MOUNTED_OK=""
	761	RunDevfsd
[1]	762	fi
[1813]	763	LoadKeymap
	764	WelcomeMessage
	765	RstHW
[232]	766	echo "Starting potential Raid/LVMs ..."
[1]	767	PauseForRaids
	768	StartRaids
[2072]	769	StartMpath
[1]	770	StartLvms
	771	CopyBootDevEntry
	772	mkdir -p /tmp/tmpfs
	773	sleep 2
	774	#clear
[241]	775	if [ -e "/dev/md0" ] && [ ! -e "/dev/md/0" ] && [ "`grep /dev/md/ /tmp/mountlist.txt`" != "" ] ; then
[1747]	776	LogIt "Creating /dev/md/* softlinks just in case." 1
	777	mkdir -p /dev/md
	778	cp -af /dev/md0 /dev/md/0 2> /dev/null
	779	cp -af /dev/md1 /dev/md/1 2> /dev/null
	780	cp -af /dev/md2 /dev/md/2 2> /dev/null
[1]	781	fi
	782	[ -e "/tmp/mountlist.txt" ] && cp -f /tmp/mountlist.txt /tmp/mountlist.original
	783
[241]	784	if ! [ "`grep -i "pxe" /proc/cmdline`" ] ; then
[1]	785	res="`cat /mnt/cdrom/archives/THIS-CD-NUMBER 2> /dev/null`"
	786	[ "$res" != "1" ] && [ "$res" != "" ] && Die "This is CD #$res in the series. Please insert CD #1."
	787	[ -e "/cdrom.lnk" ] && mv -f /cdrom.lnk /dev/cdrom && mount /dev/cdrom /mnt/cdrom && CD_MOUNTED_OK=yes
	788	[ "$CD_MOUNTED_OK" != "yes" ] && TryAgainToFindCD
	789	#mount \| grep cdrom > /dev/null 2> /dev/null \|\| mount /dev/cdrom /mnt/cdrom >> $LOGFILE 2>> $LOGFILE
	790	fi
	791	hack-cfg-if-necessary \|\| LogIt "Cannot find hack-cfg-if-necessary"
	792
[1403]	793	# Log some useful info
[1837]	794	LogIt "init (from mindi v$MINDI_VER-r${MINDI_REV})"
[1413]	795	LogIt "/proc/cmdline is:"
[2346]	796	LogIt "----------"
[1403]	797	cat /proc/cmdline >> $LOGFILE
[2346]	798	LogIt "----------"
[1413]	799	LogIt "df result:"
	800	LogIt "----------"
[1403]	801	df >> $LOGFILE
[1413]	802	LogIt "-------------"
	803	LogIt "mount result:"
	804	LogIt "-------------"
[1403]	805	mount >> $LOGFILE
[1413]	806	LogIt "-------------"
	807	LogIt "lsmod result:"
	808	LogIt "-------------"
[1403]	809	lsmod >> $LOGFILE
[1413]	810	LogIt "-------------"
[1476]	811	LogIt "dmesg result:"
	812	LogIt "-------------"
	813	dmesg >> $LOGFILE
[2015]	814	LogIt "-------------"
	815	LogIt "/proc/swaps:" >> $LOGFILE
	816	LogIt "-------------"
	817	cat /proc/swaps >> $LOGFILE
	818	LogIt "-------------"
	819	LogIt "/proc/filesystems:" >> $LOGFILE
	820	LogIt "-------------"
	821	cat /proc/filesystems >> $LOGFILE
	822	LogIt "-------------"
	823	LogIt "/proc/partitions:" >> $LOGFILE
	824	LogIt "-------------"
	825	cat /proc/partitions >> $LOGFILE
[2346]	826	LogIt "-------------"
	827	LogIt "fdisk result:" >> $LOGFILE
	828	LogIt "-------------"
	829	fdisk -l >> $LOGFILE
[1403]	830
[1983]	831	ide-opt
[1]	832
	833	#ctrlaltdel soft
	834	for path in /usr.bin /usr/bin ; do
[1747]	835	fname=$path/nano
	836	[ -e "$fname" ] && ln -sf $fname /usr/bin/pico
[1]	837	done
	838	res=`which nano 2> /dev/null`
	839	[ "$res" ] && ln -sf /usr/bin/
	840	for i in null stdout stdin stderr ; do
[1747]	841	cp -af /dev/$i /tmp
[1]	842	done
[2081]	843	# Not sure it's still needed, but shouldn't hurt
	844	if [ -e "/tmp/USE-UDEV" ] ; then
	845	if [ -x /sbin/udevadm ]; then
	846	/sbin/udevadm trigger --retry-failed
	847	fi
	848	fi
[1]	849	if grep "backup-media-type" /tmp/mondo-restore.cfg > /dev/null 2> /dev/null ; then
[1747]	850	LogIt "backup-media-type is specified in config file - great."
[2197]	851	LogIt "Calling post-init"
[2380]	852	# start-netfs moved it under /tmp as the NFS share is already unmounted
[2255]	853	if [ "`echo $pre \| grep -E '^/tmp/isodir'`" ]; then
	854	post=`echo $pre \| sed 's\|^/tmp/isodir\|/tmp\|'`
	855	fi
	856	if [ -x $pre ]; then
	857	echo "Executing preliminary script $pre"
	858	LogIt "Executing preliminary script $pre"
	859	$pre
	860	fi
[1747]	861	post-init
[1]	862	else
[1747]	863	LogIt "backup-media-type is not specified in config file."
[1885]	864	LogIt "I think this media has no archives on it."
[1]	865	fi
[2255]	866	if [ "`grep -i "post=" /proc/cmdline`" ] ; then
[2249]	867	for i in `cat /proc/cmdline` ; do
[2255]	868	echo $i \| grep -qi post= && post=`echo $i \| cut -d= -f2`
[2249]	869	done
[2380]	870	# start-netfs moved it under /tmp as the NFS share is already unmounted
[2255]	871	if [ "`echo $post \| grep -E '^/tmp/isodir'`" ]; then
	872	post=`echo $post \| sed 's\|^/tmp/isodir\|/tmp\|'`
[2253]	873	fi
[2255]	874	if [ -x $post ]; then
	875	echo "Executing final script $post"
	876	LogIt "Executing final script $post"
	877	if [ "`echo $post \| grep -E '^/mnt/RESTORING'`" ]; then
[2253]	878	mount-me
	879	fi
[2255]	880	$post
	881	if [ "`echo $post \| grep -E '^/mnt/RESTORING'`" ]; then
[2253]	882	unmount-me
	883	fi
[2249]	884	fi
	885	fi
[1612]	886	if grep "RESTORE" /proc/cmdline > /dev/null 2> /dev/null ; then
	887	echo "Rebooting in 10 seconds automatically as per reboot order"
	888	echo -en "Press ^C to interrupt if you have to ..."
	889	for i in 1 2 3 4 5 6 7 8 9 10 ; do
	890	sleep 1
	891	echo -en "."
	892	done
	893	echo "Boom."
	894	sleep 1
	895	else
	896	echo -en "Type 'exit' to reboot the PC\n"
	897	umount /mnt/cdrom 2> /dev/null
	898	mount / -o rw,remount > /dev/null 2> /dev/null
	899	LogIt "Launching Shell"
	900	sh
	901	fi
[1]	902	CaughtSoftReset
	903	# reboot

Note: See TracBrowser for help on using the repository browser.

Download in other formats: