source: MondoRescue/branches/2.2.9/mindi-busybox/miscutils/eject.c@ 2887

/* vi: set sw=4 ts=4: */
/*
 * eject implementation for busybox
 *
 * Copyright (C) 2004  Peter Willis <psyphreak@phreaker.net>
 * Copyright (C) 2005  Tito Ragusa <farmatito@tiscali.it>
 *
 * Licensed under GPLv2 or later, see file LICENSE in this source tree.
 */

/*
 * This is a simple hack of eject based on something Erik posted in #uclibc.
 * Most of the dirty work blatantly ripped off from cat.c =)
 */

#include <sys/mount.h>
#include "libbb.h"
/* Must be after libbb.h: they need size_t */
#include "fix_u32.h"
#include <scsi/sg.h>
#include <scsi/scsi.h>

/* various defines swiped from linux/cdrom.h */
#define CDROMCLOSETRAY            0x5319  /* pendant of CDROMEJECT  */
#define CDROMEJECT                0x5309  /* Ejects the cdrom media */
#define CDROM_DRIVE_STATUS        0x5326  /* Get tray position, etc. */
/* drive status possibilities returned by CDROM_DRIVE_STATUS ioctl */
#define CDS_TRAY_OPEN        2

#define dev_fd 3

/* Code taken from the original eject (http://eject.sourceforge.net/),
 * refactored it a bit for busybox (ne-bb@nicoerfurth.de) */

static void eject_scsi(const char *dev)
{
    static const char sg_commands[3][6] = {
        { ALLOW_MEDIUM_REMOVAL, 0, 0, 0, 0, 0 },
        { START_STOP, 0, 0, 0, 1, 0 },
        { START_STOP, 0, 0, 0, 2, 0 }
    };

    unsigned i;
    unsigned char sense_buffer[32];
    unsigned char inqBuff[2];
    sg_io_hdr_t io_hdr;

    if ((ioctl(dev_fd, SG_GET_VERSION_NUM, &i) < 0) || (i < 30000))
        bb_error_msg_and_die("not a sg device or old sg driver");

    memset(&io_hdr, 0, sizeof(sg_io_hdr_t));
    io_hdr.interface_id = 'S';
    io_hdr.cmd_len = 6;
    io_hdr.mx_sb_len = sizeof(sense_buffer);
    io_hdr.dxfer_direction = SG_DXFER_NONE;
    /* io_hdr.dxfer_len = 0; */
    io_hdr.dxferp = inqBuff;
    io_hdr.sbp = sense_buffer;
    io_hdr.timeout = 2000;

    for (i = 0; i < 3; i++) {
        io_hdr.cmdp = (void *)sg_commands[i];
        ioctl_or_perror_and_die(dev_fd, SG_IO, (void *)&io_hdr, "%s", dev);
    }

    /* force kernel to reread partition table when new disc is inserted */
    ioctl(dev_fd, BLKRRPART);
}

#define FLAG_CLOSE  1
#define FLAG_SMART  2
#define FLAG_SCSI   4

static void eject_cdrom(unsigned flags, const char *dev)
{
    int cmd = CDROMEJECT;

    if (flags & FLAG_CLOSE
     || ((flags & FLAG_SMART) && ioctl(dev_fd, CDROM_DRIVE_STATUS) == CDS_TRAY_OPEN)
    ) {
        cmd = CDROMCLOSETRAY;
    }

    ioctl_or_perror_and_die(dev_fd, cmd, NULL, "%s", dev);
}

int eject_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int eject_main(int argc UNUSED_PARAM, char **argv)
{
    unsigned flags;
    const char *device;

    opt_complementary = "?1:t--T:T--t";
    flags = getopt32(argv, "tT" IF_FEATURE_EJECT_SCSI("s"));
    device = argv[optind] ? argv[optind] : "/dev/cdrom";

    /* We used to do "umount <device>" here, but it was buggy
       if something was mounted OVER cdrom and
       if cdrom is mounted many times.

       This works equally well (or better):
       #!/bin/sh
       umount /dev/cdrom
       eject /dev/cdrom
    */

    xmove_fd(xopen_nonblocking(device), dev_fd);

    if (ENABLE_FEATURE_EJECT_SCSI && (flags & FLAG_SCSI))
        eject_scsi(device);
    else
        eject_cdrom(flags, device);

    if (ENABLE_FEATURE_CLEAN_UP)
        close(dev_fd);

    return EXIT_SUCCESS;
}