[3320] | 1 | /* DO NOT EDIT. This file is generated from usage.src.h */
|
---|
| 2 | /* vi: set sw=8 ts=8: */
|
---|
| 3 | /*
|
---|
| 4 | * This file suffers from chronically incorrect tabification
|
---|
| 5 | * of messages. Before editing this file:
|
---|
| 6 | * 1. Switch you editor to 8-space tab mode.
|
---|
| 7 | * 2. Do not use \t in messages, use real tab character.
|
---|
| 8 | * 3. Start each source line with message as follows:
|
---|
| 9 | * |<7 spaces>"text with tabs"....
|
---|
| 10 | * or
|
---|
| 11 | * |<5 spaces>"\ntext with tabs"....
|
---|
| 12 | */
|
---|
| 13 | #ifndef BB_USAGE_H
|
---|
| 14 | #define BB_USAGE_H 1
|
---|
| 15 |
|
---|
| 16 |
|
---|
| 17 | #define NOUSAGE_STR "\b"
|
---|
| 18 |
|
---|
| 19 |
|
---|
| 20 | #define bunzip2_trivial_usage \
|
---|
| 21 | "[-cf] [FILE]..." \
|
---|
| 22 |
|
---|
| 23 | #define bunzip2_full_usage "\n\n" \
|
---|
| 24 | "Decompress FILEs (or stdin)\n" \
|
---|
| 25 | "\nOptions:" \
|
---|
| 26 | "\n -c Write to stdout" \
|
---|
| 27 | "\n -f Force" \
|
---|
| 28 |
|
---|
| 29 | #define bzcat_trivial_usage \
|
---|
| 30 | "FILE" \
|
---|
| 31 |
|
---|
| 32 | #define bzcat_full_usage "\n\n" \
|
---|
| 33 | "Decompress to stdout" \
|
---|
| 34 |
|
---|
| 35 | #define tar_trivial_usage \
|
---|
| 36 | "-[" IF_FEATURE_TAR_CREATE("c") "xt" IF_FEATURE_SEAMLESS_GZ("z") \
|
---|
| 37 | IF_FEATURE_SEAMLESS_BZ2("j") IF_FEATURE_SEAMLESS_LZMA("a") \
|
---|
| 38 | IF_FEATURE_SEAMLESS_Z("Z") IF_FEATURE_TAR_NOPRESERVE_TIME("m") "vO] " \
|
---|
| 39 | IF_FEATURE_TAR_FROM("[-X FILE] ") \
|
---|
| 40 | "[-f TARFILE] [-C DIR] [FILE]..." \
|
---|
| 41 |
|
---|
| 42 | #define tar_full_usage "\n\n" \
|
---|
| 43 | IF_FEATURE_TAR_CREATE("Create, extract, ") \
|
---|
| 44 | IF_NOT_FEATURE_TAR_CREATE("Extract ") \
|
---|
| 45 | "or list files from a tar file\n" \
|
---|
| 46 | "\nOperation:" \
|
---|
| 47 | IF_FEATURE_TAR_CREATE( \
|
---|
| 48 | "\n c Create" \
|
---|
| 49 | ) \
|
---|
| 50 | "\n x Extract" \
|
---|
| 51 | "\n t List" \
|
---|
| 52 | "\nOptions:" \
|
---|
| 53 | "\n f Name of TARFILE ('-' for stdin/out)" \
|
---|
| 54 | "\n C Change to DIR before operation" \
|
---|
| 55 | "\n v Verbose" \
|
---|
| 56 | IF_FEATURE_SEAMLESS_GZ( \
|
---|
| 57 | "\n z (De)compress using gzip" \
|
---|
| 58 | ) \
|
---|
| 59 | IF_FEATURE_SEAMLESS_BZ2( \
|
---|
| 60 | "\n j (De)compress using bzip2" \
|
---|
| 61 | ) \
|
---|
| 62 | IF_FEATURE_SEAMLESS_LZMA( \
|
---|
| 63 | "\n a (De)compress using lzma" \
|
---|
| 64 | ) \
|
---|
| 65 | IF_FEATURE_SEAMLESS_Z( \
|
---|
| 66 | "\n Z (De)compress using compress" \
|
---|
| 67 | ) \
|
---|
| 68 | "\n O Extract to stdout" \
|
---|
| 69 | IF_FEATURE_TAR_CREATE( \
|
---|
| 70 | "\n h Follow symlinks" \
|
---|
| 71 | ) \
|
---|
| 72 | IF_FEATURE_TAR_NOPRESERVE_TIME( \
|
---|
| 73 | "\n m Don't restore mtime" \
|
---|
| 74 | ) \
|
---|
| 75 | IF_FEATURE_TAR_FROM( \
|
---|
| 76 | IF_FEATURE_TAR_LONG_OPTIONS( \
|
---|
| 77 | "\n exclude File to exclude" \
|
---|
| 78 | ) \
|
---|
| 79 | "\n X File with names to exclude" \
|
---|
| 80 | "\n T File with names to include" \
|
---|
| 81 | ) \
|
---|
| 82 |
|
---|
| 83 | #define tar_example_usage \
|
---|
| 84 | "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \
|
---|
| 85 | "$ tar -cf /tmp/tarball.tar /usr/local\n" \
|
---|
| 86 |
|
---|
| 87 | #define date_trivial_usage \
|
---|
| 88 | "[OPTIONS] [+FMT] [TIME]" \
|
---|
| 89 |
|
---|
| 90 | #define date_full_usage "\n\n" \
|
---|
| 91 | "Display time (using +FMT), or set time\n" \
|
---|
| 92 | "\nOptions:" \
|
---|
| 93 | IF_NOT_LONG_OPTS( \
|
---|
| 94 | "\n [-s] TIME Set time to TIME" \
|
---|
| 95 | "\n -u Work in UTC (don't convert to local time)" \
|
---|
| 96 | "\n -R Output RFC-2822 compliant date string" \
|
---|
| 97 | ) IF_LONG_OPTS( \
|
---|
| 98 | "\n [-s,--set] TIME Set time to TIME" \
|
---|
| 99 | "\n -u,--utc Work in UTC (don't convert to local time)" \
|
---|
| 100 | "\n -R,--rfc-2822 Output RFC-2822 compliant date string" \
|
---|
| 101 | ) \
|
---|
| 102 | IF_FEATURE_DATE_ISOFMT( \
|
---|
| 103 | "\n -I[SPEC] Output ISO-8601 compliant date string" \
|
---|
| 104 | "\n SPEC='date' (default) for date only," \
|
---|
| 105 | "\n 'hours', 'minutes', or 'seconds' for date and" \
|
---|
| 106 | "\n time to the indicated precision" \
|
---|
| 107 | ) \
|
---|
| 108 | IF_NOT_LONG_OPTS( \
|
---|
| 109 | "\n -r FILE Display last modification time of FILE" \
|
---|
| 110 | "\n -d TIME Display TIME, not 'now'" \
|
---|
| 111 | ) IF_LONG_OPTS( \
|
---|
| 112 | "\n -r,--reference FILE Display last modification time of FILE" \
|
---|
| 113 | "\n -d,--date TIME Display TIME, not 'now'" \
|
---|
| 114 | ) \
|
---|
| 115 | IF_FEATURE_DATE_ISOFMT( \
|
---|
| 116 | "\n -D FMT Use FMT for -d TIME conversion" \
|
---|
| 117 | ) \
|
---|
| 118 | "\n" \
|
---|
| 119 | "\nRecognized TIME formats:" \
|
---|
| 120 | "\n hh:mm[:ss]" \
|
---|
| 121 | "\n [YYYY.]MM.DD-hh:mm[:ss]" \
|
---|
| 122 | "\n YYYY-MM-DD hh:mm[:ss]" \
|
---|
| 123 | "\n [[[[[YY]YY]MM]DD]hh]mm[.ss]" \
|
---|
| 124 |
|
---|
| 125 | #define date_example_usage \
|
---|
| 126 | "$ date\n" \
|
---|
| 127 | "Wed Apr 12 18:52:41 MDT 2000\n" \
|
---|
| 128 |
|
---|
| 129 | #define mv_trivial_usage \
|
---|
| 130 | "[-fin] SOURCE DEST\n" \
|
---|
| 131 | "or: mv [-fin] SOURCE... DIRECTORY" \
|
---|
| 132 |
|
---|
| 133 | #define mv_full_usage "\n\n" \
|
---|
| 134 | "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY\n" \
|
---|
| 135 | "\nOptions:" \
|
---|
| 136 | "\n -f Don't prompt before overwriting" \
|
---|
| 137 | "\n -i Interactive, prompt before overwrite" \
|
---|
| 138 | "\n -n Don't overwrite an existing file" \
|
---|
| 139 |
|
---|
| 140 | #define mv_example_usage \
|
---|
| 141 | "$ mv /tmp/foo /bin/bar\n" \
|
---|
| 142 |
|
---|
| 143 | #define base64_trivial_usage \
|
---|
| 144 | "[-d] [FILE]" \
|
---|
| 145 |
|
---|
| 146 | #define base64_full_usage "\n\n" \
|
---|
| 147 | "Base64 encode or decode FILE to standard output" \
|
---|
| 148 | "\nOptions:" \
|
---|
| 149 | "\n -d Decode data" \
|
---|
| 150 |
|
---|
| 151 | #define wc_trivial_usage \
|
---|
| 152 | "[-c"IF_UNICODE_SUPPORT("m")"lwL] [FILE]..." \
|
---|
| 153 |
|
---|
| 154 | #define wc_full_usage "\n\n" \
|
---|
| 155 | "Count lines, words, and bytes for each FILE (or stdin)\n" \
|
---|
| 156 | "\nOptions:" \
|
---|
| 157 | "\n -c Count bytes" \
|
---|
| 158 | IF_UNICODE_SUPPORT( \
|
---|
| 159 | "\n -m Count characters" \
|
---|
| 160 | ) \
|
---|
| 161 | "\n -l Count newlines" \
|
---|
| 162 | "\n -w Count words" \
|
---|
| 163 | "\n -L Print longest line length" \
|
---|
| 164 |
|
---|
| 165 | #define wc_example_usage \
|
---|
| 166 | "$ wc /etc/passwd\n" \
|
---|
| 167 | " 31 46 1365 /etc/passwd\n" \
|
---|
| 168 |
|
---|
| 169 | #define yes_trivial_usage \
|
---|
| 170 | "[STRING]" \
|
---|
| 171 |
|
---|
| 172 | #define yes_full_usage "\n\n" \
|
---|
| 173 | "Repeatedly output a line with STRING, or 'y'" \
|
---|
| 174 |
|
---|
| 175 | #define tune2fs_trivial_usage \
|
---|
| 176 | "[-c MOUNT_CNT] " \
|
---|
| 177 | "[-i DAYS] " \
|
---|
| 178 | "[-L LABEL] " \
|
---|
| 179 | "BLOCKDEV" \
|
---|
| 180 |
|
---|
| 181 | #define tune2fs_full_usage "\n\n" \
|
---|
| 182 | "Adjust filesystem options on ext[23] filesystems" \
|
---|
| 183 |
|
---|
| 184 | #define patch_trivial_usage \
|
---|
| 185 | "[OPTIONS] [ORIGFILE [PATCHFILE]]" \
|
---|
| 186 |
|
---|
| 187 | #define patch_full_usage "\n\n" \
|
---|
| 188 | IF_LONG_OPTS( \
|
---|
| 189 | " -p,--strip N Strip N leading components from file names" \
|
---|
| 190 | "\n -i,--input DIFF Read DIFF instead of stdin" \
|
---|
| 191 | "\n -R,--reverse Reverse patch" \
|
---|
| 192 | "\n -N,--forward Ignore already applied patches" \
|
---|
| 193 | "\n --dry-run Don't actually change files" \
|
---|
| 194 | "\n -E,--remove-empty-files Remove output files if they become empty" \
|
---|
| 195 | ) \
|
---|
| 196 | IF_NOT_LONG_OPTS( \
|
---|
| 197 | " -p N Strip N leading components from file names" \
|
---|
| 198 | "\n -i DIFF Read DIFF instead of stdin" \
|
---|
| 199 | "\n -R Reverse patch" \
|
---|
| 200 | "\n -N Ignore already applied patches" \
|
---|
| 201 | "\n -E Remove output files if they become empty" \
|
---|
| 202 | ) \
|
---|
| 203 |
|
---|
| 204 | #define patch_example_usage \
|
---|
| 205 | "$ patch -p1 < example.diff\n" \
|
---|
| 206 | "$ patch -p0 -i example.diff" \
|
---|
| 207 |
|
---|
| 208 | #define find_trivial_usage \
|
---|
| 209 | "[PATH]... [EXPRESSION]" \
|
---|
| 210 |
|
---|
| 211 | #define find_full_usage "\n\n" \
|
---|
| 212 | "Search for files. The default PATH is the current directory,\n" \
|
---|
| 213 | "default EXPRESSION is '-print'\n" \
|
---|
| 214 | "\nEXPRESSION may consist of:" \
|
---|
| 215 | "\n -follow Follow symlinks" \
|
---|
| 216 | IF_FEATURE_FIND_XDEV( \
|
---|
| 217 | "\n -xdev Don't descend directories on other filesystems" \
|
---|
| 218 | ) \
|
---|
| 219 | IF_FEATURE_FIND_MAXDEPTH( \
|
---|
| 220 | "\n -maxdepth N Descend at most N levels. -maxdepth 0 applies" \
|
---|
| 221 | "\n tests/actions to command line arguments only" \
|
---|
| 222 | ) \
|
---|
| 223 | "\n -mindepth N Don't act on first N levels" \
|
---|
| 224 | "\n -name PATTERN File name (w/o directory name) matches PATTERN" \
|
---|
| 225 | "\n -iname PATTERN Case insensitive -name" \
|
---|
| 226 | IF_FEATURE_FIND_PATH( \
|
---|
| 227 | "\n -path PATTERN Path matches PATTERN" \
|
---|
| 228 | ) \
|
---|
| 229 | IF_FEATURE_FIND_REGEX( \
|
---|
| 230 | "\n -regex PATTERN Path matches regex PATTERN" \
|
---|
| 231 | ) \
|
---|
| 232 | IF_FEATURE_FIND_TYPE( \
|
---|
| 233 | "\n -type X File type is X (X is one of: f,d,l,b,c,...)" \
|
---|
| 234 | ) \
|
---|
| 235 | IF_FEATURE_FIND_PERM( \
|
---|
| 236 | "\n -perm NNN Permissions match any of (+NNN), all of (-NNN)," \
|
---|
| 237 | "\n or exactly NNN" \
|
---|
| 238 | ) \
|
---|
| 239 | IF_FEATURE_FIND_MTIME( \
|
---|
| 240 | "\n -mtime DAYS Modified time is greater than (+N), less than (-N)," \
|
---|
| 241 | "\n or exactly N days" \
|
---|
| 242 | ) \
|
---|
| 243 | IF_FEATURE_FIND_MMIN( \
|
---|
| 244 | "\n -mmin MINS Modified time is greater than (+N), less than (-N)," \
|
---|
| 245 | "\n or exactly N minutes" \
|
---|
| 246 | ) \
|
---|
| 247 | IF_FEATURE_FIND_NEWER( \
|
---|
| 248 | "\n -newer FILE Modified time is more recent than FILE's" \
|
---|
| 249 | ) \
|
---|
| 250 | IF_FEATURE_FIND_INUM( \
|
---|
| 251 | "\n -inum N File has inode number N" \
|
---|
| 252 | ) \
|
---|
| 253 | IF_FEATURE_FIND_USER( \
|
---|
| 254 | "\n -user NAME File is owned by user NAME (numeric user ID allowed)" \
|
---|
| 255 | ) \
|
---|
| 256 | IF_FEATURE_FIND_GROUP( \
|
---|
| 257 | "\n -group NAME File belongs to group NAME (numeric group ID allowed)" \
|
---|
| 258 | ) \
|
---|
| 259 | IF_FEATURE_FIND_DEPTH( \
|
---|
| 260 | "\n -depth Process directory name after traversing it" \
|
---|
| 261 | ) \
|
---|
| 262 | IF_FEATURE_FIND_SIZE( \
|
---|
| 263 | "\n -size N[bck] File size is N (c:bytes,k:kbytes,b:512 bytes(def.))" \
|
---|
| 264 | "\n +/-N: file size is bigger/smaller than N" \
|
---|
| 265 | ) \
|
---|
| 266 | IF_FEATURE_FIND_LINKS( \
|
---|
| 267 | "\n -links N Number of links is greater than (+N), less than (-N)," \
|
---|
| 268 | "\n or exactly N" \
|
---|
| 269 | ) \
|
---|
| 270 | "\n -print Print (default and assumed)" \
|
---|
| 271 | IF_FEATURE_FIND_PRINT0( \
|
---|
| 272 | "\n -print0 Delimit output with null characters rather than" \
|
---|
| 273 | "\n newlines" \
|
---|
| 274 | ) \
|
---|
| 275 | IF_FEATURE_FIND_CONTEXT( \
|
---|
| 276 | "\n -context File has specified security context" \
|
---|
| 277 | ) \
|
---|
| 278 | IF_FEATURE_FIND_EXEC( \
|
---|
| 279 | "\n -exec CMD ARG ; Run CMD with all instances of {} replaced by the" \
|
---|
| 280 | "\n matching files" \
|
---|
| 281 | ) \
|
---|
| 282 | IF_FEATURE_FIND_PRUNE( \
|
---|
| 283 | "\n -prune Stop traversing current subtree" \
|
---|
| 284 | ) \
|
---|
| 285 | IF_FEATURE_FIND_DELETE( \
|
---|
| 286 | "\n -delete Delete files, turns on -depth option" \
|
---|
| 287 | ) \
|
---|
| 288 | IF_FEATURE_FIND_PAREN( \
|
---|
| 289 | "\n (EXPR) Group an expression" \
|
---|
| 290 | ) \
|
---|
| 291 |
|
---|
| 292 | #define find_example_usage \
|
---|
| 293 | "$ find / -name passwd\n" \
|
---|
| 294 | "/etc/passwd\n" \
|
---|
| 295 |
|
---|
| 296 | #define grep_trivial_usage \
|
---|
| 297 | "[-HhnlLoqvsriw" \
|
---|
| 298 | "F" \
|
---|
| 299 | IF_FEATURE_GREP_EGREP_ALIAS("E") \
|
---|
| 300 | IF_EXTRA_COMPAT("z") \
|
---|
| 301 | "] [-m N] " \
|
---|
| 302 | IF_FEATURE_GREP_CONTEXT("[-A/B/C N] ") \
|
---|
| 303 | "PATTERN/-e PATTERN.../-f FILE [FILE]..." \
|
---|
| 304 |
|
---|
| 305 | #define grep_full_usage "\n\n" \
|
---|
| 306 | "Search for PATTERN in FILEs (or stdin)\n" \
|
---|
| 307 | "\nOptions:" \
|
---|
| 308 | "\n -H Add 'filename:' prefix" \
|
---|
| 309 | "\n -h Do not add 'filename:' prefix" \
|
---|
| 310 | "\n -n Add 'line_no:' prefix" \
|
---|
| 311 | "\n -l Show only names of files that match" \
|
---|
| 312 | "\n -L Show only names of files that don't match" \
|
---|
| 313 | "\n -c Show only count of matching lines" \
|
---|
| 314 | "\n -o Show only the matching part of line" \
|
---|
| 315 | "\n -q Quiet. Return 0 if PATTERN is found, 1 otherwise" \
|
---|
| 316 | "\n -v Select non-matching lines" \
|
---|
| 317 | "\n -s Suppress open and read errors" \
|
---|
| 318 | "\n -r Recurse" \
|
---|
| 319 | "\n -i Ignore case" \
|
---|
| 320 | "\n -w Match whole words only" \
|
---|
| 321 | "\n -F PATTERN is a literal (not regexp)" \
|
---|
| 322 | IF_FEATURE_GREP_EGREP_ALIAS( \
|
---|
| 323 | "\n -E PATTERN is an extended regexp" \
|
---|
| 324 | ) \
|
---|
| 325 | IF_EXTRA_COMPAT( \
|
---|
| 326 | "\n -z Input is NUL terminated" \
|
---|
| 327 | ) \
|
---|
| 328 | "\n -m N Match up to N times per file" \
|
---|
| 329 | IF_FEATURE_GREP_CONTEXT( \
|
---|
| 330 | "\n -A N Print N lines of trailing context" \
|
---|
| 331 | "\n -B N Print N lines of leading context" \
|
---|
| 332 | "\n -C N Same as '-A N -B N'" \
|
---|
| 333 | ) \
|
---|
| 334 | "\n -e PTRN Pattern to match" \
|
---|
| 335 | "\n -f FILE Read pattern from file" \
|
---|
| 336 |
|
---|
| 337 | #define grep_example_usage \
|
---|
| 338 | "$ grep root /etc/passwd\n" \
|
---|
| 339 | "root:x:0:0:root:/root:/bin/bash\n" \
|
---|
| 340 | "$ grep ^[rR]oo. /etc/passwd\n" \
|
---|
| 341 | "root:x:0:0:root:/root:/bin/bash\n" \
|
---|
| 342 |
|
---|
| 343 | #define egrep_trivial_usage NOUSAGE_STR \
|
---|
| 344 |
|
---|
| 345 | #define egrep_full_usage "" \
|
---|
| 346 |
|
---|
| 347 | #define fgrep_trivial_usage NOUSAGE_STR \
|
---|
| 348 |
|
---|
| 349 | #define fgrep_full_usage "" \
|
---|
| 350 |
|
---|
| 351 | #define xargs_trivial_usage \
|
---|
| 352 | "[OPTIONS] [PROG ARGS]" \
|
---|
| 353 |
|
---|
| 354 | #define xargs_full_usage "\n\n" \
|
---|
| 355 | "Run PROG on every item given by stdin\n" \
|
---|
| 356 | "\nOptions:" \
|
---|
| 357 | IF_FEATURE_XARGS_SUPPORT_CONFIRMATION( \
|
---|
| 358 | "\n -p Ask user whether to run each command" \
|
---|
| 359 | ) \
|
---|
| 360 | "\n -r Don't run command if input is empty" \
|
---|
| 361 | IF_FEATURE_XARGS_SUPPORT_ZERO_TERM( \
|
---|
| 362 | "\n -0 Input is separated by NUL characters" \
|
---|
| 363 | ) \
|
---|
| 364 | "\n -t Print the command on stderr before execution" \
|
---|
| 365 | "\n -e[STR] STR stops input processing" \
|
---|
| 366 | "\n -n N Pass no more than N args to PROG" \
|
---|
| 367 | "\n -s N Pass command line of no more than N bytes" \
|
---|
| 368 | IF_FEATURE_XARGS_SUPPORT_TERMOPT( \
|
---|
| 369 | "\n -x Exit if size is exceeded" \
|
---|
| 370 | ) \
|
---|
| 371 |
|
---|
| 372 | #define xargs_example_usage \
|
---|
| 373 | "$ ls | xargs gzip\n" \
|
---|
| 374 | "$ find . -name '*.c' -print | xargs rm\n" \
|
---|
| 375 |
|
---|
| 376 | #define bootchartd_trivial_usage \
|
---|
| 377 | "start [PROG ARGS]|stop|init" \
|
---|
| 378 |
|
---|
| 379 | #define bootchartd_full_usage "\n\n" \
|
---|
| 380 | "Create /var/log/bootchart.tgz with boot chart data\n" \
|
---|
| 381 | "\nOptions:" \
|
---|
| 382 | "\nstart: start background logging; with PROG, run PROG, then kill logging with USR1" \
|
---|
| 383 | "\nstop: send USR1 to all bootchartd processes" \
|
---|
| 384 | "\ninit: start background logging; stop when getty/xdm is seen (for init scripts)" \
|
---|
| 385 | "\nUnder PID 1: as init, then exec $bootchart_init, /init, /sbin/init" \
|
---|
| 386 |
|
---|
| 387 | #define halt_trivial_usage \
|
---|
| 388 | "[-d DELAY] [-n] [-f]" IF_FEATURE_WTMP(" [-w]") \
|
---|
| 389 |
|
---|
| 390 | #define halt_full_usage "\n\n" \
|
---|
| 391 | "Halt the system\n" \
|
---|
| 392 | "\nOptions:" \
|
---|
| 393 | "\n -d SEC Delay interval" \
|
---|
| 394 | "\n -n Do not sync" \
|
---|
| 395 | "\n -f Force (don't go through init)" \
|
---|
| 396 | IF_FEATURE_WTMP( \
|
---|
| 397 | "\n -w Only write a wtmp record" \
|
---|
| 398 | ) \
|
---|
| 399 |
|
---|
| 400 | #define poweroff_trivial_usage \
|
---|
| 401 | "[-d DELAY] [-n] [-f]" \
|
---|
| 402 |
|
---|
| 403 | #define poweroff_full_usage "\n\n" \
|
---|
| 404 | "Halt and shut off power\n" \
|
---|
| 405 | "\nOptions:" \
|
---|
| 406 | "\n -d SEC Delay interval" \
|
---|
| 407 | "\n -n Do not sync" \
|
---|
| 408 | "\n -f Force (don't go through init)" \
|
---|
| 409 |
|
---|
| 410 | #define reboot_trivial_usage \
|
---|
| 411 | "[-d DELAY] [-n] [-f]" \
|
---|
| 412 |
|
---|
| 413 | #define reboot_full_usage "\n\n" \
|
---|
| 414 | "Reboot the system\n" \
|
---|
| 415 | "\nOptions:" \
|
---|
| 416 | "\n -d SEC Delay interval" \
|
---|
| 417 | "\n -n Do not sync" \
|
---|
| 418 | "\n -f Force (don't go through init)" \
|
---|
| 419 |
|
---|
| 420 | #define linuxrc_trivial_usage NOUSAGE_STR \
|
---|
| 421 |
|
---|
| 422 | #define linuxrc_full_usage "" \
|
---|
| 423 |
|
---|
| 424 | #define init_trivial_usage \
|
---|
| 425 | "" \
|
---|
| 426 |
|
---|
| 427 | #define init_full_usage "\n\n" \
|
---|
| 428 | "Init is the parent of all processes" \
|
---|
| 429 |
|
---|
| 430 | #define init_notes_usage \
|
---|
| 431 | "This version of init is designed to be run only by the kernel.\n" \
|
---|
| 432 | "\n" \
|
---|
| 433 | "BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \
|
---|
| 434 | "the /etc/inittab file is completely ignored by BusyBox init. If you want\n" \
|
---|
| 435 | "runlevels, use sysvinit.\n" \
|
---|
| 436 | "\n" \
|
---|
| 437 | "BusyBox init works just fine without an inittab. If no inittab is found,\n" \
|
---|
| 438 | "it has the following default behavior:\n" \
|
---|
| 439 | "\n" \
|
---|
| 440 | " ::sysinit:/etc/init.d/rcS\n" \
|
---|
| 441 | " ::askfirst:/bin/sh\n" \
|
---|
| 442 | " ::ctrlaltdel:/sbin/reboot\n" \
|
---|
| 443 | " ::shutdown:/sbin/swapoff -a\n" \
|
---|
| 444 | " ::shutdown:/bin/umount -a -r\n" \
|
---|
| 445 | " ::restart:/sbin/init\n" \
|
---|
| 446 | "\n" \
|
---|
| 447 | "if it detects that /dev/console is _not_ a serial console, it will also run:\n" \
|
---|
| 448 | "\n" \
|
---|
| 449 | " tty2::askfirst:/bin/sh\n" \
|
---|
| 450 | " tty3::askfirst:/bin/sh\n" \
|
---|
| 451 | " tty4::askfirst:/bin/sh\n" \
|
---|
| 452 | "\n" \
|
---|
| 453 | "If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \
|
---|
| 454 | "\n" \
|
---|
| 455 | " <id>:<runlevels>:<action>:<process>\n" \
|
---|
| 456 | "\n" \
|
---|
| 457 | " <id>:\n" \
|
---|
| 458 | "\n" \
|
---|
| 459 | " WARNING: This field has a non-traditional meaning for BusyBox init!\n" \
|
---|
| 460 | " The id field is used by BusyBox init to specify the controlling tty for\n" \
|
---|
| 461 | " the specified process to run on. The contents of this field are\n" \
|
---|
| 462 | " appended to \"/dev/\" and used as-is. There is no need for this field to\n" \
|
---|
| 463 | " be unique, although if it isn't you may have strange results. If this\n" \
|
---|
| 464 | " field is left blank, the controlling tty is set to the console. Also\n" \
|
---|
| 465 | " note that if BusyBox detects that a serial console is in use, then only\n" \
|
---|
| 466 | " entries whose controlling tty is either the serial console or /dev/null\n" \
|
---|
| 467 | " will be run. BusyBox init does nothing with utmp. We don't need no\n" \
|
---|
| 468 | " stinkin' utmp.\n" \
|
---|
| 469 | "\n" \
|
---|
| 470 | " <runlevels>:\n" \
|
---|
| 471 | "\n" \
|
---|
| 472 | " The runlevels field is completely ignored.\n" \
|
---|
| 473 | "\n" \
|
---|
| 474 | " <action>:\n" \
|
---|
| 475 | "\n" \
|
---|
| 476 | " Valid actions include: sysinit, respawn, askfirst, wait,\n" \
|
---|
| 477 | " once, restart, ctrlaltdel, and shutdown.\n" \
|
---|
| 478 | "\n" \
|
---|
| 479 | " The available actions can be classified into two groups: actions\n" \
|
---|
| 480 | " that are run only once, and actions that are re-run when the specified\n" \
|
---|
| 481 | " process exits.\n" \
|
---|
| 482 | "\n" \
|
---|
| 483 | " Run only-once actions:\n" \
|
---|
| 484 | "\n" \
|
---|
| 485 | " 'sysinit' is the first item run on boot. init waits until all\n" \
|
---|
| 486 | " sysinit actions are completed before continuing. Following the\n" \
|
---|
| 487 | " completion of all sysinit actions, all 'wait' actions are run.\n" \
|
---|
| 488 | " 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \
|
---|
| 489 | " the specified task completes. 'once' actions are asynchronous,\n" \
|
---|
| 490 | " therefore, init does not wait for them to complete. 'restart' is\n" \
|
---|
| 491 | " the action taken to restart the init process. By default this should\n" \
|
---|
| 492 | " simply run /sbin/init, but can be a script which runs pivot_root or it\n" \
|
---|
| 493 | " can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \
|
---|
| 494 | " actions are run when the system detects that someone on the system\n" \
|
---|
| 495 | " console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \
|
---|
| 496 | " wants to run 'reboot' at this point to cause the system to reboot.\n" \
|
---|
| 497 | " Finally the 'shutdown' action specifies the actions to taken when\n" \
|
---|
| 498 | " init is told to reboot. Unmounting filesystems and disabling swap\n" \
|
---|
| 499 | " is a very good here.\n" \
|
---|
| 500 | "\n" \
|
---|
| 501 | " Run repeatedly actions:\n" \
|
---|
| 502 | "\n" \
|
---|
| 503 | " 'respawn' actions are run after the 'once' actions. When a process\n" \
|
---|
| 504 | " started with a 'respawn' action exits, init automatically restarts\n" \
|
---|
| 505 | " it. Unlike sysvinit, BusyBox init does not stop processes from\n" \
|
---|
| 506 | " respawning out of control. The 'askfirst' actions acts just like\n" \
|
---|
| 507 | " respawn, except that before running the specified process it\n" \
|
---|
| 508 | " displays the line \"Please press Enter to activate this console.\"\n" \
|
---|
| 509 | " and then waits for the user to press enter before starting the\n" \
|
---|
| 510 | " specified process.\n" \
|
---|
| 511 | "\n" \
|
---|
| 512 | " Unrecognized actions (like initdefault) will cause init to emit an\n" \
|
---|
| 513 | " error message, and then go along with its business. All actions are\n" \
|
---|
| 514 | " run in the order they appear in /etc/inittab.\n" \
|
---|
| 515 | "\n" \
|
---|
| 516 | " <process>:\n" \
|
---|
| 517 | "\n" \
|
---|
| 518 | " Specifies the process to be executed and its command line.\n" \
|
---|
| 519 | "\n" \
|
---|
| 520 | "Example /etc/inittab file:\n" \
|
---|
| 521 | "\n" \
|
---|
| 522 | " # This is run first except when booting in single-user mode\n" \
|
---|
| 523 | " #\n" \
|
---|
| 524 | " ::sysinit:/etc/init.d/rcS\n" \
|
---|
| 525 | " \n" \
|
---|
| 526 | " # /bin/sh invocations on selected ttys\n" \
|
---|
| 527 | " #\n" \
|
---|
| 528 | " # Start an \"askfirst\" shell on the console (whatever that may be)\n" \
|
---|
| 529 | " ::askfirst:-/bin/sh\n" \
|
---|
| 530 | " # Start an \"askfirst\" shell on /dev/tty2-4\n" \
|
---|
| 531 | " tty2::askfirst:-/bin/sh\n" \
|
---|
| 532 | " tty3::askfirst:-/bin/sh\n" \
|
---|
| 533 | " tty4::askfirst:-/bin/sh\n" \
|
---|
| 534 | " \n" \
|
---|
| 535 | " # /sbin/getty invocations for selected ttys\n" \
|
---|
| 536 | " #\n" \
|
---|
| 537 | " tty4::respawn:/sbin/getty 38400 tty4\n" \
|
---|
| 538 | " tty5::respawn:/sbin/getty 38400 tty5\n" \
|
---|
| 539 | " \n" \
|
---|
| 540 | " \n" \
|
---|
| 541 | " # Example of how to put a getty on a serial line (for a terminal)\n" \
|
---|
| 542 | " #\n" \
|
---|
| 543 | " #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \
|
---|
| 544 | " #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \
|
---|
| 545 | " #\n" \
|
---|
| 546 | " # Example how to put a getty on a modem line\n" \
|
---|
| 547 | " #::respawn:/sbin/getty 57600 ttyS2\n" \
|
---|
| 548 | " \n" \
|
---|
| 549 | " # Stuff to do when restarting the init process\n" \
|
---|
| 550 | " ::restart:/sbin/init\n" \
|
---|
| 551 | " \n" \
|
---|
| 552 | " # Stuff to do before rebooting\n" \
|
---|
| 553 | " ::ctrlaltdel:/sbin/reboot\n" \
|
---|
| 554 | " ::shutdown:/bin/umount -a -r\n" \
|
---|
| 555 | " ::shutdown:/sbin/swapoff -a\n" \
|
---|
| 556 |
|
---|
| 557 | #define mesg_trivial_usage \
|
---|
| 558 | "[y|n]" \
|
---|
| 559 |
|
---|
| 560 | #define mesg_full_usage "\n\n" \
|
---|
| 561 | "Control write access to your terminal\n" \
|
---|
| 562 | " y Allow write access to your terminal\n" \
|
---|
| 563 | " n Disallow write access to your terminal" \
|
---|
| 564 |
|
---|
| 565 | #define add_shell_trivial_usage \
|
---|
| 566 | "SHELL..." \
|
---|
| 567 |
|
---|
| 568 | #define add_shell_full_usage "\n\n" \
|
---|
| 569 | "Add SHELLs to /etc/shells" \
|
---|
| 570 |
|
---|
| 571 | #define remove_shell_trivial_usage \
|
---|
| 572 | "SHELL..." \
|
---|
| 573 |
|
---|
| 574 | #define remove_shell_full_usage "\n\n" \
|
---|
| 575 | "Remove SHELLs from /etc/shells" \
|
---|
| 576 |
|
---|
| 577 | #define conspy_trivial_usage \
|
---|
| 578 | "[-vcsndf] [-x COL] [-y LINE] [CONSOLE_NO]" \
|
---|
| 579 |
|
---|
| 580 | #define conspy_full_usage "\n\n" \
|
---|
| 581 | "A text-mode VNC like program for Linux virtual consoles." \
|
---|
| 582 | "\nTo exit, quickly press ESC 3 times." \
|
---|
| 583 | "\n" \
|
---|
| 584 | "\nOptions:" \
|
---|
| 585 | "\n -v Don't send keystrokes to the console" \
|
---|
| 586 | "\n -c Create missing devices in /dev" \
|
---|
| 587 | "\n -s Open a SHELL session" \
|
---|
| 588 | "\n -n Black & white" \
|
---|
| 589 | "\n -d Dump console to stdout" \
|
---|
| 590 | "\n -f Follow cursor" \
|
---|
| 591 | "\n -x COL Starting column" \
|
---|
| 592 | "\n -y LINE Starting line" \
|
---|
| 593 |
|
---|
| 594 | #define dc_trivial_usage \
|
---|
| 595 | "EXPRESSION..." \
|
---|
| 596 |
|
---|
| 597 | #define dc_full_usage "\n\n" \
|
---|
| 598 | "Tiny RPN calculator. Operations:\n" \
|
---|
| 599 | "+, add, -, sub, *, mul, /, div, %, mod, **, exp, and, or, not, eor,\n" \
|
---|
| 600 | "p - print top of the stack (without popping),\n" \
|
---|
| 601 | "f - print entire stack,\n" \
|
---|
| 602 | "o - pop the value and set output radix (must be 10, 16, 8 or 2).\n" \
|
---|
| 603 | "Examples: 'dc 2 2 add' -> 4, 'dc 8 8 * 2 2 + /' -> 16" \
|
---|
| 604 |
|
---|
| 605 | #define dc_example_usage \
|
---|
| 606 | "$ dc 2 2 + p\n" \
|
---|
| 607 | "4\n" \
|
---|
| 608 | "$ dc 8 8 \\* 2 2 + / p\n" \
|
---|
| 609 | "16\n" \
|
---|
| 610 | "$ dc 0 1 and p\n" \
|
---|
| 611 | "0\n" \
|
---|
| 612 | "$ dc 0 1 or p\n" \
|
---|
| 613 | "1\n" \
|
---|
| 614 | "$ echo 72 9 div 8 mul p | dc\n" \
|
---|
| 615 | "64\n" \
|
---|
| 616 |
|
---|
| 617 | #define nandwrite_trivial_usage \
|
---|
| 618 | "[-p] [-s ADDR] MTD_DEVICE [FILE]" \
|
---|
| 619 |
|
---|
| 620 | #define nandwrite_full_usage "\n\n" \
|
---|
| 621 | "Write to the specified MTD device\n" \
|
---|
| 622 | "\nOptions:" \
|
---|
| 623 | "\n -p Pad to page size" \
|
---|
| 624 | "\n -s ADDR Start address" \
|
---|
| 625 |
|
---|
| 626 | #define nanddump_trivial_usage \
|
---|
| 627 | "[-o] [-b] [-s ADDR] [-f FILE] MTD_DEVICE" \
|
---|
| 628 |
|
---|
| 629 | #define nanddump_full_usage "\n\n" \
|
---|
| 630 | "Dump the sepcified MTD device\n" \
|
---|
| 631 | "\nOptions:" \
|
---|
| 632 | "\n -o Omit oob data" \
|
---|
| 633 | "\n -b Omit bad block from the dump" \
|
---|
| 634 | "\n -s ADDR Start address" \
|
---|
| 635 | "\n -l LEN Length" \
|
---|
| 636 | "\n -f FILE Dump to file ('-' for stdout)" \
|
---|
| 637 |
|
---|
| 638 | #define ubiattach_trivial_usage \
|
---|
| 639 | "-m MTD_NUM [-d UBI_NUM] UBI_CTRL_DEV" \
|
---|
| 640 |
|
---|
| 641 | #define ubiattach_full_usage "\n\n" \
|
---|
| 642 | "Attach MTD device to UBI\n" \
|
---|
| 643 | "\nOptions:" \
|
---|
| 644 | "\n -m MTD_NUM MTD device number to attach" \
|
---|
| 645 | "\n -d UBI_NUM UBI device number to assign" \
|
---|
| 646 |
|
---|
| 647 | #define ubidetach_trivial_usage \
|
---|
| 648 | "-d UBI_NUM UBI_CTRL_DEV" \
|
---|
| 649 |
|
---|
| 650 | #define ubidetach_full_usage "\n\n" \
|
---|
| 651 | "Detach MTD device from UBI\n" \
|
---|
| 652 | "\nOptions:" \
|
---|
| 653 | "\n -d UBI_NUM UBI device number" \
|
---|
| 654 |
|
---|
| 655 | #if !ENABLE_MODPROBE_SMALL \
|
---|
| 656 |
|
---|
| 657 | #define depmod_trivial_usage NOUSAGE_STR \
|
---|
| 658 |
|
---|
| 659 | #define depmod_full_usage "" \
|
---|
| 660 |
|
---|
| 661 | #endif \
|
---|
| 662 |
|
---|
| 663 | #if !ENABLE_MODPROBE_SMALL \
|
---|
| 664 |
|
---|
| 665 | #define insmod_trivial_usage \
|
---|
| 666 | IF_FEATURE_2_4_MODULES("[OPTIONS] MODULE ") \
|
---|
| 667 | IF_NOT_FEATURE_2_4_MODULES("FILE ") \
|
---|
| 668 | "[SYMBOL=VALUE]..." \
|
---|
| 669 |
|
---|
| 670 | #define insmod_full_usage "\n\n" \
|
---|
| 671 | "Load the specified kernel modules into the kernel" \
|
---|
| 672 | IF_FEATURE_2_4_MODULES( "\n" \
|
---|
| 673 | "\nOptions:" \
|
---|
| 674 | "\n -f Force module to load into the wrong kernel version" \
|
---|
| 675 | "\n -k Make module autoclean-able" \
|
---|
| 676 | "\n -v Verbose" \
|
---|
| 677 | "\n -q Quiet" \
|
---|
| 678 | "\n -L Lock: prevent simultaneous loads" \
|
---|
| 679 | IF_FEATURE_INSMOD_LOAD_MAP( \
|
---|
| 680 | "\n -m Output load map to stdout" \
|
---|
| 681 | ) \
|
---|
| 682 | "\n -x Don't export externs" \
|
---|
| 683 | ) \
|
---|
| 684 |
|
---|
| 685 | #endif \
|
---|
| 686 |
|
---|
| 687 | #if !ENABLE_MODPROBE_SMALL \
|
---|
| 688 |
|
---|
| 689 | #define lsmod_trivial_usage \
|
---|
| 690 | "" \
|
---|
| 691 |
|
---|
| 692 | #define lsmod_full_usage "\n\n" \
|
---|
| 693 | "List the currently loaded kernel modules" \
|
---|
| 694 |
|
---|
| 695 | #endif \
|
---|
| 696 |
|
---|
| 697 | #define modinfo_trivial_usage \
|
---|
| 698 | "[-adlp0] [-F keyword] MODULE" \
|
---|
| 699 |
|
---|
| 700 | #define modinfo_full_usage "\n\n" \
|
---|
| 701 | "Options:" \
|
---|
| 702 | "\n -a Shortcut for '-F author'" \
|
---|
| 703 | "\n -d Shortcut for '-F description'" \
|
---|
| 704 | "\n -l Shortcut for '-F license'" \
|
---|
| 705 | "\n -p Shortcut for '-F parm'" \
|
---|
| 706 | "\n -F keyword Keyword to look for" \
|
---|
| 707 | "\n -0 Separate output with NULs" \
|
---|
| 708 |
|
---|
| 709 | #define modinfo_example_usage \
|
---|
| 710 | "$ modinfo -F vermagic loop\n" \
|
---|
| 711 |
|
---|
| 712 | #if !ENABLE_MODPROBE_SMALL \
|
---|
| 713 |
|
---|
| 714 | #define modprobe_notes_usage \
|
---|
| 715 | "modprobe can (un)load a stack of modules, passing each module options (when\n" \
|
---|
| 716 | "loading). modprobe uses a configuration file to determine what option(s) to\n" \
|
---|
| 717 | "pass each module it loads.\n" \
|
---|
| 718 | "\n" \
|
---|
| 719 | "The configuration file is searched (in this order):\n" \
|
---|
| 720 | "\n" \
|
---|
| 721 | " /etc/modprobe.conf (2.6 only)\n" \
|
---|
| 722 | " /etc/modules.conf\n" \
|
---|
| 723 | " /etc/conf.modules (deprecated)\n" \
|
---|
| 724 | "\n" \
|
---|
| 725 | "They all have the same syntax (see below). If none is present, it is\n" \
|
---|
| 726 | "_not_ an error; each loaded module is then expected to load without\n" \
|
---|
| 727 | "options. Once a file is found, the others are tested for.\n" \
|
---|
| 728 | "\n" \
|
---|
| 729 | "/etc/modules.conf entry format:\n" \
|
---|
| 730 | "\n" \
|
---|
| 731 | " alias <alias_name> <mod_name>\n" \
|
---|
| 732 | " Makes it possible to modprobe alias_name, when there is no such module.\n" \
|
---|
| 733 | " It makes sense if your mod_name is long, or you want a more representative\n" \
|
---|
| 734 | " name for that module (eg. 'scsi' in place of 'aha7xxx').\n" \
|
---|
| 735 | " This makes it also possible to use a different set of options (below) for\n" \
|
---|
| 736 | " the module and the alias.\n" \
|
---|
| 737 | " A module can be aliased more than once.\n" \
|
---|
| 738 | "\n" \
|
---|
| 739 | " options <mod_name|alias_name> <symbol=value...>\n" \
|
---|
| 740 | " When loading module mod_name (or the module aliased by alias_name), pass\n" \
|
---|
| 741 | " the \"symbol=value\" pairs as option to that module.\n" \
|
---|
| 742 | "\n" \
|
---|
| 743 | "Sample /etc/modules.conf file:\n" \
|
---|
| 744 | "\n" \
|
---|
| 745 | " options tulip irq=3\n" \
|
---|
| 746 | " alias tulip tulip2\n" \
|
---|
| 747 | " options tulip2 irq=4 io=0x308\n" \
|
---|
| 748 | "\n" \
|
---|
| 749 | "Other functionality offered by 'classic' modprobe is not available in\n" \
|
---|
| 750 | "this implementation.\n" \
|
---|
| 751 | "\n" \
|
---|
| 752 | "If module options are present both in the config file, and on the command line,\n" \
|
---|
| 753 | "then the options from the command line will be passed to the module _after_\n" \
|
---|
| 754 | "the options from the config file. That way, you can have defaults in the config\n" \
|
---|
| 755 | "file, and override them for a specific usage from the command line.\n" \
|
---|
| 756 |
|
---|
| 757 | #define modprobe_example_usage \
|
---|
| 758 | "(with the above /etc/modules.conf):\n\n" \
|
---|
| 759 | "$ modprobe tulip\n" \
|
---|
| 760 | " will load the module 'tulip' with default option 'irq=3'\n\n" \
|
---|
| 761 | "$ modprobe tulip irq=5\n" \
|
---|
| 762 | " will load the module 'tulip' with option 'irq=5', thus overriding the default\n\n" \
|
---|
| 763 | "$ modprobe tulip2\n" \
|
---|
| 764 | " will load the module 'tulip' with default options 'irq=4 io=0x308',\n" \
|
---|
| 765 | " which are the default for alias 'tulip2'\n\n" \
|
---|
| 766 | "$ modprobe tulip2 irq=8\n" \
|
---|
| 767 | " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" \
|
---|
| 768 | " which are the default for alias 'tulip2' overridden by the option 'irq=8'\n\n" \
|
---|
| 769 | " from the command line\n\n" \
|
---|
| 770 | "$ modprobe tulip2 irq=2 io=0x210\n" \
|
---|
| 771 | " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" \
|
---|
| 772 | " which are the default for alias 'tulip2' overridden by the options 'irq=2 io=0x210'\n\n" \
|
---|
| 773 | " from the command line\n" \
|
---|
| 774 |
|
---|
| 775 | #define modprobe_trivial_usage \
|
---|
| 776 | "[-alrqvs" \
|
---|
| 777 | IF_FEATURE_MODPROBE_BLACKLIST("b") \
|
---|
| 778 | "] MODULE [symbol=value]..." \
|
---|
| 779 |
|
---|
| 780 | #define modprobe_full_usage "\n\n" \
|
---|
| 781 | "Options:" \
|
---|
| 782 | "\n -a Load multiple MODULEs" \
|
---|
| 783 | "\n -l List (MODULE is a pattern)" \
|
---|
| 784 | "\n -r Remove MODULE (stacks) or do autoclean" \
|
---|
| 785 | "\n -q Quiet" \
|
---|
| 786 | "\n -v Verbose" \
|
---|
| 787 | "\n -s Log to syslog" \
|
---|
| 788 | IF_FEATURE_MODPROBE_BLACKLIST( \
|
---|
| 789 | "\n -b Apply blacklist to module names too" \
|
---|
| 790 | ) \
|
---|
| 791 |
|
---|
| 792 | #endif /* !ENABLE_MODPROBE_SMALL */ \
|
---|
| 793 |
|
---|
| 794 | #if ENABLE_MODPROBE_SMALL \
|
---|
| 795 |
|
---|
| 796 | #define depmod_trivial_usage NOUSAGE_STR \
|
---|
| 797 |
|
---|
| 798 | #define depmod_full_usage "" \
|
---|
| 799 |
|
---|
| 800 | #define lsmod_trivial_usage \
|
---|
| 801 | "" \
|
---|
| 802 |
|
---|
| 803 | #define lsmod_full_usage "\n\n" \
|
---|
| 804 | "List the currently loaded kernel modules" \
|
---|
| 805 |
|
---|
| 806 | #define insmod_trivial_usage \
|
---|
| 807 | IF_FEATURE_2_4_MODULES("[OPTIONS] MODULE ") \
|
---|
| 808 | IF_NOT_FEATURE_2_4_MODULES("FILE ") \
|
---|
| 809 | "[SYMBOL=VALUE]..." \
|
---|
| 810 |
|
---|
| 811 | #define insmod_full_usage "\n\n" \
|
---|
| 812 | "Load the specified kernel modules into the kernel" \
|
---|
| 813 | IF_FEATURE_2_4_MODULES( "\n" \
|
---|
| 814 | "\nOptions:" \
|
---|
| 815 | "\n -f Force module to load into the wrong kernel version" \
|
---|
| 816 | "\n -k Make module autoclean-able" \
|
---|
| 817 | "\n -v Verbose" \
|
---|
| 818 | "\n -q Quiet" \
|
---|
| 819 | "\n -L Lock: prevent simultaneous loads" \
|
---|
| 820 | IF_FEATURE_INSMOD_LOAD_MAP( \
|
---|
| 821 | "\n -m Output load map to stdout" \
|
---|
| 822 | ) \
|
---|
| 823 | "\n -x Don't export externs" \
|
---|
| 824 | ) \
|
---|
| 825 |
|
---|
| 826 | #define rmmod_trivial_usage \
|
---|
| 827 | "[-wfa] [MODULE]..." \
|
---|
| 828 |
|
---|
| 829 | #define rmmod_full_usage "\n\n" \
|
---|
| 830 | "Unload kernel modules\n" \
|
---|
| 831 | "\nOptions:" \
|
---|
| 832 | "\n -w Wait until the module is no longer used" \
|
---|
| 833 | "\n -f Force unload" \
|
---|
| 834 | "\n -a Remove all unused modules (recursively)" \
|
---|
| 835 |
|
---|
| 836 | #define rmmod_example_usage \
|
---|
| 837 | "$ rmmod tulip\n" \
|
---|
| 838 |
|
---|
| 839 | #define modprobe_trivial_usage \
|
---|
| 840 | "[-qfwrsv] MODULE [symbol=value]..." \
|
---|
| 841 |
|
---|
| 842 | #define modprobe_full_usage "\n\n" \
|
---|
| 843 | "Options:" \
|
---|
| 844 | "\n -r Remove MODULE (stacks) or do autoclean" \
|
---|
| 845 | "\n -q Quiet" \
|
---|
| 846 | "\n -v Verbose" \
|
---|
| 847 | "\n -f Force" \
|
---|
| 848 | "\n -w Wait for unload" \
|
---|
| 849 | "\n -s Report via syslog instead of stderr" \
|
---|
| 850 |
|
---|
| 851 | #endif \
|
---|
| 852 |
|
---|
| 853 | #if !ENABLE_MODPROBE_SMALL \
|
---|
| 854 |
|
---|
| 855 | #define rmmod_trivial_usage \
|
---|
| 856 | "[-wfa] [MODULE]..." \
|
---|
| 857 |
|
---|
| 858 | #define rmmod_full_usage "\n\n" \
|
---|
| 859 | "Unload kernel modules\n" \
|
---|
| 860 | "\nOptions:" \
|
---|
| 861 | "\n -w Wait until the module is no longer used" \
|
---|
| 862 | "\n -f Force unload" \
|
---|
| 863 | "\n -a Remove all unused modules (recursively)" \
|
---|
| 864 |
|
---|
| 865 | #define rmmod_example_usage \
|
---|
| 866 | "$ rmmod tulip\n" \
|
---|
| 867 |
|
---|
| 868 | #endif \
|
---|
| 869 |
|
---|
| 870 | #define nbdclient_trivial_usage \
|
---|
| 871 | "HOST PORT BLOCKDEV" \
|
---|
| 872 |
|
---|
| 873 | #define nbdclient_full_usage "\n\n" \
|
---|
| 874 | "Connect to HOST and provide a network block device on BLOCKDEV" \
|
---|
| 875 |
|
---|
| 876 | #if ENABLE_NC_110_COMPAT \
|
---|
| 877 |
|
---|
| 878 | #define nc_trivial_usage \
|
---|
| 879 | "[OPTIONS] HOST PORT - connect" \
|
---|
| 880 | IF_NC_SERVER("\n" \
|
---|
| 881 | "nc [OPTIONS] -l -p PORT [HOST] [PORT] - listen" \
|
---|
| 882 | ) \
|
---|
| 883 |
|
---|
| 884 | #define nc_full_usage "\n\n" \
|
---|
| 885 | "Options:" \
|
---|
| 886 | "\n -e PROG Run PROG after connect (must be last)" \
|
---|
| 887 | IF_NC_SERVER( \
|
---|
| 888 | "\n -l Listen mode, for inbound connects" \
|
---|
| 889 | ) \
|
---|
| 890 | "\n -p PORT Local port" \
|
---|
| 891 | "\n -s ADDR Local address" \
|
---|
| 892 | "\n -w SEC Timeout for connects and final net reads" \
|
---|
| 893 | IF_NC_EXTRA( \
|
---|
| 894 | "\n -i SEC Delay interval for lines sent" /* ", ports scanned" */ \
|
---|
| 895 | ) \
|
---|
| 896 | "\n -n Don't do DNS resolution" \
|
---|
| 897 | "\n -u UDP mode" \
|
---|
| 898 | "\n -v Verbose" \
|
---|
| 899 | IF_NC_EXTRA( \
|
---|
| 900 | "\n -o FILE Hex dump traffic" \
|
---|
| 901 | "\n -z Zero-I/O mode (scanning)" \
|
---|
| 902 | ) \
|
---|
| 903 |
|
---|
| 904 | #endif \
|
---|
| 905 |
|
---|
| 906 | #if !ENABLE_NC_110_COMPAT \
|
---|
| 907 |
|
---|
| 908 | #if ENABLE_NC_SERVER || ENABLE_NC_EXTRA \
|
---|
| 909 |
|
---|
| 910 | #define NC_OPTIONS_STR "\n\nOptions:" \
|
---|
| 911 |
|
---|
| 912 | #else \
|
---|
| 913 |
|
---|
| 914 | #define NC_OPTIONS_STR \
|
---|
| 915 |
|
---|
| 916 | #endif \
|
---|
| 917 |
|
---|
| 918 | #define nc_trivial_usage \
|
---|
| 919 | IF_NC_EXTRA("[-iN] [-wN] ")IF_NC_SERVER("[-l] [-p PORT] ") \
|
---|
| 920 | "["IF_NC_EXTRA("-f FILE|")"IPADDR PORT]"IF_NC_EXTRA(" [-e PROG]") \
|
---|
| 921 |
|
---|
| 922 | #define nc_full_usage "\n\n" \
|
---|
| 923 | "Open a pipe to IP:PORT" IF_NC_EXTRA(" or FILE") \
|
---|
| 924 | NC_OPTIONS_STR \
|
---|
| 925 | IF_NC_EXTRA( \
|
---|
| 926 | "\n -e PROG Run PROG after connect" \
|
---|
| 927 | IF_NC_SERVER( \
|
---|
| 928 | "\n -l Listen mode, for inbound connects" \
|
---|
| 929 | IF_NC_EXTRA( \
|
---|
| 930 | "\n (use -l twice with -e for persistent server)") \
|
---|
| 931 | "\n -p PORT Local port" \
|
---|
| 932 | ) \
|
---|
| 933 | "\n -w SEC Timeout for connect" \
|
---|
| 934 | "\n -i SEC Delay interval for lines sent" \
|
---|
| 935 | "\n -f FILE Use file (ala /dev/ttyS0) instead of network" \
|
---|
| 936 | ) \
|
---|
| 937 |
|
---|
| 938 | #define nc_notes_usage "" \
|
---|
| 939 | IF_NC_EXTRA( \
|
---|
| 940 | "To use netcat as a terminal emulator on a serial port:\n\n" \
|
---|
| 941 | "$ stty 115200 -F /dev/ttyS0\n" \
|
---|
| 942 | "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \
|
---|
| 943 | ) \
|
---|
| 944 |
|
---|
| 945 | #define nc_example_usage \
|
---|
| 946 | "$ nc foobar.somedomain.com 25\n" \
|
---|
| 947 | "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \
|
---|
| 948 | "help\n" \
|
---|
| 949 | "214-Commands supported:\n" \
|
---|
| 950 | "214- HELO EHLO MAIL RCPT DATA AUTH\n" \
|
---|
| 951 | "214 NOOP QUIT RSET HELP\n" \
|
---|
| 952 | "quit\n" \
|
---|
| 953 | "221 foobar closing connection\n" \
|
---|
| 954 |
|
---|
| 955 | #endif \
|
---|
| 956 |
|
---|
| 957 | #define netstat_trivial_usage \
|
---|
| 958 | "[-"IF_ROUTE("r")"al] [-tuwx] [-en"IF_FEATURE_NETSTAT_WIDE("W")IF_FEATURE_NETSTAT_PRG("p")"]" \
|
---|
| 959 |
|
---|
| 960 | #define netstat_full_usage "\n\n" \
|
---|
| 961 | "Display networking information\n" \
|
---|
| 962 | "\nOptions:" \
|
---|
| 963 | IF_ROUTE( \
|
---|
| 964 | "\n -r Routing table" \
|
---|
| 965 | ) \
|
---|
| 966 | "\n -a All sockets" \
|
---|
| 967 | "\n -l Listening sockets" \
|
---|
| 968 | "\n Else: connected sockets" \
|
---|
| 969 | "\n -t TCP sockets" \
|
---|
| 970 | "\n -u UDP sockets" \
|
---|
| 971 | "\n -w Raw sockets" \
|
---|
| 972 | "\n -x Unix sockets" \
|
---|
| 973 | "\n Else: all socket types" \
|
---|
| 974 | "\n -e Other/more information" \
|
---|
| 975 | "\n -n Don't resolve names" \
|
---|
| 976 | IF_FEATURE_NETSTAT_WIDE( \
|
---|
| 977 | "\n -W Wide display" \
|
---|
| 978 | ) \
|
---|
| 979 | IF_FEATURE_NETSTAT_PRG( \
|
---|
| 980 | "\n -p Show PID/program name for sockets" \
|
---|
| 981 | ) \
|
---|
| 982 |
|
---|
| 983 | #define iostat_trivial_usage \
|
---|
| 984 | "[-c] [-d] [-t] [-z] [-k|-m] [ALL|BLOCKDEV...] [INTERVAL [COUNT]]" \
|
---|
| 985 |
|
---|
| 986 | #define iostat_full_usage "\n\n" \
|
---|
| 987 | "Report CPU and I/O statistics\n" \
|
---|
| 988 | "\nOptions:" \
|
---|
| 989 | "\n -c Show CPU utilization" \
|
---|
| 990 | "\n -d Show device utilization" \
|
---|
| 991 | "\n -t Print current time" \
|
---|
| 992 | "\n -z Omit devices with no activity" \
|
---|
| 993 | "\n -k Use kb/s" \
|
---|
| 994 | "\n -m Use Mb/s" \
|
---|
| 995 |
|
---|
| 996 | #define mpstat_trivial_usage \
|
---|
| 997 | "[-A] [-I SUM|CPU|ALL|SCPU] [-u] [-P num|ALL] [INTERVAL [COUNT]]" \
|
---|
| 998 |
|
---|
| 999 | #define mpstat_full_usage "\n\n" \
|
---|
| 1000 | "Per-processor statistics\n" \
|
---|
| 1001 | "\nOptions:" \
|
---|
| 1002 | "\n -A Same as -I ALL -u -P ALL" \
|
---|
| 1003 | "\n -I SUM|CPU|ALL|SCPU Report interrupt statistics" \
|
---|
| 1004 | "\n -P num|ALL Processor to monitor" \
|
---|
| 1005 | "\n -u Report CPU utilization" \
|
---|
| 1006 |
|
---|
| 1007 | #define pmap_trivial_usage \
|
---|
| 1008 | "[-x][-q] PID" \
|
---|
| 1009 |
|
---|
| 1010 | #define pmap_full_usage "\n\n" \
|
---|
| 1011 | "Display detailed precesses' memory usage\n" \
|
---|
| 1012 | "\nOptions:" \
|
---|
| 1013 | "\n -x show details" \
|
---|
| 1014 | "\n -q quiet" \
|
---|
| 1015 |
|
---|
| 1016 | #define powertop_trivial_usage \
|
---|
| 1017 | "" \
|
---|
| 1018 |
|
---|
| 1019 | #define powertop_full_usage "\n\n" \
|
---|
| 1020 | "Analyze power consumption on Intel-based laptops\n" \
|
---|
| 1021 |
|
---|
| 1022 | #define smemcap_trivial_usage ">SMEMDATA.TAR" \
|
---|
| 1023 |
|
---|
| 1024 | #define smemcap_full_usage "\n\n" \
|
---|
| 1025 | "Collect memory usage data in /proc and write it to stdout" \
|
---|
| 1026 |
|
---|
| 1027 | #define ash_trivial_usage NOUSAGE_STR \
|
---|
| 1028 |
|
---|
| 1029 | #define ash_full_usage "" \
|
---|
| 1030 |
|
---|
| 1031 | #define sh_trivial_usage NOUSAGE_STR \
|
---|
| 1032 |
|
---|
| 1033 | #define sh_full_usage "" \
|
---|
| 1034 |
|
---|
| 1035 | #define bash_trivial_usage NOUSAGE_STR \
|
---|
| 1036 |
|
---|
| 1037 | #define bash_full_usage "" \
|
---|
| 1038 |
|
---|
| 1039 | #define cttyhack_trivial_usage \
|
---|
| 1040 | "PROG ARGS" \
|
---|
| 1041 |
|
---|
| 1042 | #define cttyhack_full_usage "\n\n" \
|
---|
| 1043 | "Give PROG a controlling tty if possible." \
|
---|
| 1044 | "\nExample for /etc/inittab (for busybox init):" \
|
---|
| 1045 | "\n ::respawn:/bin/cttyhack /bin/sh" \
|
---|
| 1046 | "\nGiving controlling tty to shell running with PID 1:" \
|
---|
| 1047 | "\n $ exec cttyhack sh" \
|
---|
| 1048 | "\nStarting interactive shell from boot shell script:" \
|
---|
| 1049 | "\n setsid cttyhack sh" \
|
---|
| 1050 |
|
---|
| 1051 | #define hush_trivial_usage NOUSAGE_STR \
|
---|
| 1052 |
|
---|
| 1053 | #define hush_full_usage "" \
|
---|
| 1054 |
|
---|
| 1055 | #define msh_trivial_usage NOUSAGE_STR \
|
---|
| 1056 |
|
---|
| 1057 | #define msh_full_usage "" \
|
---|
| 1058 |
|
---|
| 1059 | #define sh_trivial_usage NOUSAGE_STR \
|
---|
| 1060 |
|
---|
| 1061 | #define sh_full_usage "" \
|
---|
| 1062 |
|
---|
| 1063 | #define bash_trivial_usage NOUSAGE_STR \
|
---|
| 1064 |
|
---|
| 1065 | #define bash_full_usage "" \
|
---|
| 1066 |
|
---|
| 1067 | #define blockdev_trivial_usage \
|
---|
| 1068 | "OPTION BLOCKDEV" \
|
---|
| 1069 |
|
---|
| 1070 | #define blockdev_full_usage "\n\n" \
|
---|
| 1071 | "Options:" \
|
---|
| 1072 | "\n --setro Set ro" \
|
---|
| 1073 | "\n --setrw Set rw" \
|
---|
| 1074 | "\n --getro Get ro" \
|
---|
| 1075 | "\n --getss Get sector size" \
|
---|
| 1076 | "\n --getbsz Get block size" \
|
---|
| 1077 | "\n --setbsz BYTES Set block size" \
|
---|
| 1078 | "\n --getsize Get device size in 512-byte sectors" \
|
---|
| 1079 | "\n --getsize64 Get device size in bytes" \
|
---|
| 1080 | "\n --flushbufs Flush buffers" \
|
---|
| 1081 | "\n --rereadpt Reread partition table" \
|
---|
| 1082 |
|
---|
| 1083 | #define rev_trivial_usage \
|
---|
| 1084 | "[FILE]..." \
|
---|
| 1085 |
|
---|
| 1086 | #define rev_full_usage "\n\n" \
|
---|
| 1087 | "Reverse lines of FILE" \
|
---|
| 1088 |
|
---|
| 1089 | #if defined CONFIG_UDHCP_DEBUG && CONFIG_UDHCP_DEBUG >= 1 \
|
---|
| 1090 |
|
---|
| 1091 | # define IF_UDHCP_VERBOSE(...) __VA_ARGS__ \
|
---|
| 1092 |
|
---|
| 1093 | #else \
|
---|
| 1094 |
|
---|
| 1095 | # define IF_UDHCP_VERBOSE(...) \
|
---|
| 1096 |
|
---|
| 1097 | #endif \
|
---|
| 1098 |
|
---|
| 1099 | #define udhcpc_trivial_usage \
|
---|
| 1100 | "[-fbnq"IF_UDHCP_VERBOSE("v")"oCR] [-i IFACE] [-r IP] [-s PROG] [-p PIDFILE]\n" \
|
---|
| 1101 | " [-H HOSTNAME] [-V VENDOR] [-x OPT:VAL]... [-O OPT]..." IF_FEATURE_UDHCP_PORT(" [-P N]") \
|
---|
| 1102 |
|
---|
| 1103 | #define udhcpc_full_usage "\n" \
|
---|
| 1104 | IF_LONG_OPTS( \
|
---|
| 1105 | "\n -i,--interface IFACE Interface to use (default eth0)" \
|
---|
| 1106 | "\n -p,--pidfile FILE Create pidfile" \
|
---|
| 1107 | "\n -s,--script PROG Run PROG at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \
|
---|
| 1108 | "\n -t,--retries N Send up to N discover packets" \
|
---|
| 1109 | "\n -T,--timeout N Pause between packets (default 3 seconds)" \
|
---|
| 1110 | "\n -A,--tryagain N Wait N seconds after failure (default 20)" \
|
---|
| 1111 | "\n -f,--foreground Run in foreground" \
|
---|
| 1112 | USE_FOR_MMU( \
|
---|
| 1113 | "\n -b,--background Background if lease is not obtained" \
|
---|
| 1114 | ) \
|
---|
| 1115 | "\n -n,--now Exit if lease is not obtained" \
|
---|
| 1116 | "\n -q,--quit Exit after obtaining lease" \
|
---|
| 1117 | "\n -R,--release Release IP on exit" \
|
---|
| 1118 | "\n -S,--syslog Log to syslog too" \
|
---|
| 1119 | IF_FEATURE_UDHCP_PORT( \
|
---|
| 1120 | "\n -P,--client-port N Use port N (default 68)" \
|
---|
| 1121 | ) \
|
---|
| 1122 | IF_FEATURE_UDHCPC_ARPING( \
|
---|
| 1123 | "\n -a,--arping Use arping to validate offered address" \
|
---|
| 1124 | ) \
|
---|
| 1125 | "\n -O,--request-option OPT Request option OPT from server (cumulative)" \
|
---|
| 1126 | "\n -o,--no-default-options Don't request any options (unless -O is given)" \
|
---|
| 1127 | "\n -r,--request IP Request this IP address" \
|
---|
| 1128 | "\n -x OPT:VAL Include option OPT in sent packets (cumulative)" \
|
---|
| 1129 | "\n Examples of string, numeric, and hex byte opts:" \
|
---|
| 1130 | "\n -x hostname:bbox - option 12" \
|
---|
| 1131 | "\n -x lease:3600 - option 51 (lease time)" \
|
---|
| 1132 | "\n -x 0x3d:0100BEEFC0FFEE - option 61 (client id)" \
|
---|
| 1133 | "\n -F,--fqdn NAME Ask server to update DNS mapping for NAME" \
|
---|
| 1134 | "\n -H,-h,--hostname NAME Send NAME as client hostname (default none)" \
|
---|
| 1135 | "\n -V,--vendorclass VENDOR Vendor identifier (default 'udhcp VERSION')" \
|
---|
| 1136 | "\n -C,--clientid-none Don't send MAC as client identifier" \
|
---|
| 1137 | IF_UDHCP_VERBOSE( \
|
---|
| 1138 | "\n -v Verbose" \
|
---|
| 1139 | ) \
|
---|
| 1140 | ) \
|
---|
| 1141 | IF_NOT_LONG_OPTS( \
|
---|
| 1142 | "\n -i IFACE Interface to use (default eth0)" \
|
---|
| 1143 | "\n -p FILE Create pidfile" \
|
---|
| 1144 | "\n -s PROG Run PROG at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \
|
---|
| 1145 | "\n -t N Send up to N discover packets" \
|
---|
| 1146 | "\n -T N Pause between packets (default 3 seconds)" \
|
---|
| 1147 | "\n -A N Wait N seconds (default 20) after failure" \
|
---|
| 1148 | "\n -f Run in foreground" \
|
---|
| 1149 | USE_FOR_MMU( \
|
---|
| 1150 | "\n -b Background if lease is not obtained" \
|
---|
| 1151 | ) \
|
---|
| 1152 | "\n -n Exit if lease is not obtained" \
|
---|
| 1153 | "\n -q Exit after obtaining lease" \
|
---|
| 1154 | "\n -R Release IP on exit" \
|
---|
| 1155 | "\n -S Log to syslog too" \
|
---|
| 1156 | IF_FEATURE_UDHCP_PORT( \
|
---|
| 1157 | "\n -P N Use port N (default 68)" \
|
---|
| 1158 | ) \
|
---|
| 1159 | IF_FEATURE_UDHCPC_ARPING( \
|
---|
| 1160 | "\n -a Use arping to validate offered address" \
|
---|
| 1161 | ) \
|
---|
| 1162 | "\n -O OPT Request option OPT from server (cumulative)" \
|
---|
| 1163 | "\n -o Don't request any options (unless -O is given)" \
|
---|
| 1164 | "\n -r IP Request this IP address" \
|
---|
| 1165 | "\n -x OPT:VAL Include option OPT in sent packets (cumulative)" \
|
---|
| 1166 | "\n Examples of string, numeric, and hex byte opts:" \
|
---|
| 1167 | "\n -x hostname:bbox - option 12" \
|
---|
| 1168 | "\n -x lease:3600 - option 51 (lease time)" \
|
---|
| 1169 | "\n -x 0x3d:0100BEEFC0FFEE - option 61 (client id)" \
|
---|
| 1170 | "\n -F NAME Ask server to update DNS mapping for NAME" \
|
---|
| 1171 | "\n -H,-h NAME Send NAME as client hostname (default none)" \
|
---|
| 1172 | "\n -V VENDOR Vendor identifier (default 'udhcp VERSION')" \
|
---|
| 1173 | "\n -C Don't send MAC as client identifier" \
|
---|
| 1174 | IF_UDHCP_VERBOSE( \
|
---|
| 1175 | "\n -v Verbose" \
|
---|
| 1176 | ) \
|
---|
| 1177 | ) \
|
---|
| 1178 |
|
---|
| 1179 | #define acpid_trivial_usage \
|
---|
| 1180 | "[-d] [-c CONFDIR] [-l LOGFILE] [-a ACTIONFILE] [-M MAPFILE] [-e PROC_EVENT_FILE] [-p PIDFILE]"
|
---|
| 1181 | #define acpid_full_usage "\n\n" \
|
---|
| 1182 | "Listen to ACPI events and spawn specific helpers on event arrival\n" \
|
---|
| 1183 | "\nOptions:" \
|
---|
| 1184 | "\n -c DIR Config directory [/etc/acpi]" \
|
---|
| 1185 | "\n -d Don't daemonize, (implies -f)" \
|
---|
| 1186 | "\n -e FILE /proc event file [/proc/acpi/event]" \
|
---|
| 1187 | "\n -f Run in foreground" \
|
---|
| 1188 | "\n -l FILE Log file [/var/log/acpid.log]" \
|
---|
| 1189 | "\n -p FILE Pid file [/var/run/acpid.pid]" \
|
---|
| 1190 | "\n -a FILE Action file [/etc/acpid.conf]" \
|
---|
| 1191 | "\n -M FILE Map file [/etc/acpi.map]" \
|
---|
| 1192 | IF_FEATURE_ACPID_COMPAT( \
|
---|
| 1193 | "\n\nAccept and ignore compatibility options -g -m -s -S -v" \
|
---|
| 1194 | )
|
---|
| 1195 |
|
---|
| 1196 | #define acpid_example_usage \
|
---|
| 1197 | "Without -e option, acpid uses all /dev/input/event* files\n" \
|
---|
| 1198 | "# acpid\n" \
|
---|
| 1199 | "# acpid -l /var/log/my-acpi-log\n" \
|
---|
| 1200 | "# acpid -e /proc/acpi/event\n"
|
---|
| 1201 |
|
---|
| 1202 | #define addgroup_trivial_usage \
|
---|
| 1203 | "[-g GID] " IF_FEATURE_ADDUSER_TO_GROUP("[USER] ") "GROUP"
|
---|
| 1204 | #define addgroup_full_usage "\n\n" \
|
---|
| 1205 | "Add a group " IF_FEATURE_ADDUSER_TO_GROUP("or add a user to a group") "\n" \
|
---|
| 1206 | "\nOptions:" \
|
---|
| 1207 | "\n -g GID Group id" \
|
---|
| 1208 | "\n -S Create a system group" \
|
---|
| 1209 |
|
---|
| 1210 | #define adduser_trivial_usage \
|
---|
| 1211 | "[OPTIONS] USER"
|
---|
| 1212 | #define adduser_full_usage "\n\n" \
|
---|
| 1213 | "Add a user\n" \
|
---|
| 1214 | "\nOptions:" \
|
---|
| 1215 | "\n -h DIR Home directory" \
|
---|
| 1216 | "\n -g GECOS GECOS field" \
|
---|
| 1217 | "\n -s SHELL Login shell" \
|
---|
| 1218 | "\n -G GRP Add user to existing group" \
|
---|
| 1219 | "\n -S Create a system user" \
|
---|
| 1220 | "\n -D Don't assign a password" \
|
---|
| 1221 | "\n -H Don't create home directory" \
|
---|
| 1222 | "\n -u UID User id" \
|
---|
| 1223 |
|
---|
| 1224 | #define adjtimex_trivial_usage \
|
---|
| 1225 | "[-q] [-o OFF] [-f FREQ] [-p TCONST] [-t TICK]"
|
---|
| 1226 | #define adjtimex_full_usage "\n\n" \
|
---|
| 1227 | "Read and optionally set system timebase parameters. See adjtimex(2)\n" \
|
---|
| 1228 | "\nOptions:" \
|
---|
| 1229 | "\n -q Quiet" \
|
---|
| 1230 | "\n -o OFF Time offset, microseconds" \
|
---|
| 1231 | "\n -f FREQ Frequency adjust, integer kernel units (65536 is 1ppm)" \
|
---|
| 1232 | "\n (positive values make clock run faster)" \
|
---|
| 1233 | "\n -t TICK Microseconds per tick, usually 10000" \
|
---|
| 1234 | "\n -p TCONST" \
|
---|
| 1235 |
|
---|
| 1236 | #define ar_trivial_usage \
|
---|
| 1237 | "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
|
---|
| 1238 | #define ar_full_usage "\n\n" \
|
---|
| 1239 | "Extract or list FILES from an ar archive\n" \
|
---|
| 1240 | "\nOptions:" \
|
---|
| 1241 | "\n -o Preserve original dates" \
|
---|
| 1242 | "\n -p Extract to stdout" \
|
---|
| 1243 | "\n -t List" \
|
---|
| 1244 | "\n -x Extract" \
|
---|
| 1245 | "\n -v Verbose" \
|
---|
| 1246 |
|
---|
| 1247 | #define arp_trivial_usage \
|
---|
| 1248 | "\n[-vn] [-H HWTYPE] [-i IF] -a [HOSTNAME]" \
|
---|
| 1249 | "\n[-v] [-i IF] -d HOSTNAME [pub]" \
|
---|
| 1250 | "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [temp]" \
|
---|
| 1251 | "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [netmask MASK] pub" \
|
---|
| 1252 | "\n[-v] [-H HWTYPE] [-i IF] -Ds HOSTNAME IFACE [netmask MASK] pub"
|
---|
| 1253 | #define arp_full_usage "\n\n" \
|
---|
| 1254 | "Manipulate ARP cache\n" \
|
---|
| 1255 | "\nOptions:" \
|
---|
| 1256 | "\n -a Display (all) hosts" \
|
---|
| 1257 | "\n -s Set new ARP entry" \
|
---|
| 1258 | "\n -d Delete a specified entry" \
|
---|
| 1259 | "\n -v Verbose" \
|
---|
| 1260 | "\n -n Don't resolve names" \
|
---|
| 1261 | "\n -i IF Network interface" \
|
---|
| 1262 | "\n -D Read <hwaddr> from given device" \
|
---|
| 1263 | "\n -A,-p AF Protocol family" \
|
---|
| 1264 | "\n -H HWTYPE Hardware address type" \
|
---|
| 1265 |
|
---|
| 1266 | #define arping_trivial_usage \
|
---|
| 1267 | "[-fqbDUA] [-c CNT] [-w TIMEOUT] [-I IFACE] [-s SRC_IP] DST_IP"
|
---|
| 1268 | #define arping_full_usage "\n\n" \
|
---|
| 1269 | "Send ARP requests/replies\n" \
|
---|
| 1270 | "\nOptions:" \
|
---|
| 1271 | "\n -f Quit on first ARP reply" \
|
---|
| 1272 | "\n -q Quiet" \
|
---|
| 1273 | "\n -b Keep broadcasting, don't go unicast" \
|
---|
| 1274 | "\n -D Duplicated address detection mode" \
|
---|
| 1275 | "\n -U Unsolicited ARP mode, update your neighbors" \
|
---|
| 1276 | "\n -A ARP answer mode, update your neighbors" \
|
---|
| 1277 | "\n -c N Stop after sending N ARP requests" \
|
---|
| 1278 | "\n -w TIMEOUT Time to wait for ARP reply, seconds" \
|
---|
| 1279 | "\n -I IFACE Interface to use (default eth0)" \
|
---|
| 1280 | "\n -s SRC_IP Sender IP address" \
|
---|
| 1281 | "\n DST_IP Target IP address" \
|
---|
| 1282 |
|
---|
| 1283 | #define awk_trivial_usage \
|
---|
| 1284 | "[OPTIONS] [AWK_PROGRAM] [FILE]..."
|
---|
| 1285 | #define awk_full_usage "\n\n" \
|
---|
| 1286 | "Options:" \
|
---|
| 1287 | "\n -v VAR=VAL Set variable" \
|
---|
| 1288 | "\n -F SEP Use SEP as field separator" \
|
---|
| 1289 | "\n -f FILE Read program from FILE" \
|
---|
| 1290 |
|
---|
| 1291 | #define basename_trivial_usage \
|
---|
| 1292 | "FILE [SUFFIX]"
|
---|
| 1293 | #define basename_full_usage "\n\n" \
|
---|
| 1294 | "Strip directory path and .SUFFIX from FILE\n"
|
---|
| 1295 | #define basename_example_usage \
|
---|
| 1296 | "$ basename /usr/local/bin/foo\n" \
|
---|
| 1297 | "foo\n" \
|
---|
| 1298 | "$ basename /usr/local/bin/\n" \
|
---|
| 1299 | "bin\n" \
|
---|
| 1300 | "$ basename /foo/bar.txt .txt\n" \
|
---|
| 1301 | "bar"
|
---|
| 1302 |
|
---|
| 1303 | #define beep_trivial_usage \
|
---|
| 1304 | "-f FREQ -l LEN -d DELAY -r COUNT -n"
|
---|
| 1305 | #define beep_full_usage "\n\n" \
|
---|
| 1306 | "Options:" \
|
---|
| 1307 | "\n -f Frequency in Hz" \
|
---|
| 1308 | "\n -l Length in ms" \
|
---|
| 1309 | "\n -d Delay in ms" \
|
---|
| 1310 | "\n -r Repetitions" \
|
---|
| 1311 | "\n -n Start new tone" \
|
---|
| 1312 |
|
---|
| 1313 | #define blkid_trivial_usage \
|
---|
| 1314 | ""
|
---|
| 1315 | #define blkid_full_usage "\n\n" \
|
---|
| 1316 | "Print UUIDs of all filesystems"
|
---|
| 1317 |
|
---|
| 1318 | #define brctl_trivial_usage \
|
---|
| 1319 | "COMMAND [BRIDGE [INTERFACE]]"
|
---|
| 1320 | #define brctl_full_usage "\n\n" \
|
---|
| 1321 | "Manage ethernet bridges\n" \
|
---|
| 1322 | "\nCommands:" \
|
---|
| 1323 | IF_FEATURE_BRCTL_SHOW( \
|
---|
| 1324 | "\n show Show a list of bridges" \
|
---|
| 1325 | ) \
|
---|
| 1326 | "\n addbr BRIDGE Create BRIDGE" \
|
---|
| 1327 | "\n delbr BRIDGE Delete BRIDGE" \
|
---|
| 1328 | "\n addif BRIDGE IFACE Add IFACE to BRIDGE" \
|
---|
| 1329 | "\n delif BRIDGE IFACE Delete IFACE from BRIDGE" \
|
---|
| 1330 | IF_FEATURE_BRCTL_FANCY( \
|
---|
| 1331 | "\n setageing BRIDGE TIME Set ageing time" \
|
---|
| 1332 | "\n setfd BRIDGE TIME Set bridge forward delay" \
|
---|
| 1333 | "\n sethello BRIDGE TIME Set hello time" \
|
---|
| 1334 | "\n setmaxage BRIDGE TIME Set max message age" \
|
---|
| 1335 | "\n setpathcost BRIDGE COST Set path cost" \
|
---|
| 1336 | "\n setportprio BRIDGE PRIO Set port priority" \
|
---|
| 1337 | "\n setbridgeprio BRIDGE PRIO Set bridge priority" \
|
---|
| 1338 | "\n stp BRIDGE [1/yes/on|0/no/off] STP on/off" \
|
---|
| 1339 | ) \
|
---|
| 1340 |
|
---|
| 1341 | #define bzip2_trivial_usage \
|
---|
| 1342 | "[OPTIONS] [FILE]..."
|
---|
| 1343 | #define bzip2_full_usage "\n\n" \
|
---|
| 1344 | "Compress FILEs (or stdin) with bzip2 algorithm\n" \
|
---|
| 1345 | "\nOptions:" \
|
---|
| 1346 | "\n -1..9 Compression level" \
|
---|
| 1347 | "\n -d Decompress" \
|
---|
| 1348 | "\n -c Write to stdout" \
|
---|
| 1349 | "\n -f Force" \
|
---|
| 1350 |
|
---|
| 1351 | #define busybox_notes_usage \
|
---|
| 1352 | "Hello world!\n"
|
---|
| 1353 |
|
---|
| 1354 | #define lzop_trivial_usage \
|
---|
| 1355 | "[-cfvd123456789CF] [FILE]..."
|
---|
| 1356 | #define lzop_full_usage "\n\n" \
|
---|
| 1357 | "Options:" \
|
---|
| 1358 | "\n -1..9 Compression level" \
|
---|
| 1359 | "\n -d Decompress" \
|
---|
| 1360 | "\n -c Write to stdout" \
|
---|
| 1361 | "\n -f Force" \
|
---|
| 1362 | "\n -v Verbose" \
|
---|
| 1363 | "\n -F Don't store or verify checksum" \
|
---|
| 1364 | "\n -C Also write checksum of compressed block" \
|
---|
| 1365 |
|
---|
| 1366 | #define lzopcat_trivial_usage \
|
---|
| 1367 | "[-vCF] [FILE]..."
|
---|
| 1368 | #define lzopcat_full_usage "\n\n" \
|
---|
| 1369 | " -v Verbose" \
|
---|
| 1370 | "\n -F Don't store or verify checksum" \
|
---|
| 1371 |
|
---|
| 1372 | #define unlzop_trivial_usage \
|
---|
| 1373 | "[-cfvCF] [FILE]..."
|
---|
| 1374 | #define unlzop_full_usage "\n\n" \
|
---|
| 1375 | "Options:" \
|
---|
| 1376 | "\n -c Write to stdout" \
|
---|
| 1377 | "\n -f Force" \
|
---|
| 1378 | "\n -v Verbose" \
|
---|
| 1379 | "\n -F Don't store or verify checksum" \
|
---|
| 1380 |
|
---|
| 1381 | #define unlzma_trivial_usage \
|
---|
| 1382 | "[-cf] [FILE]..."
|
---|
| 1383 | #define unlzma_full_usage "\n\n" \
|
---|
| 1384 | "Decompress FILE (or stdin)\n" \
|
---|
| 1385 | "\nOptions:" \
|
---|
| 1386 | "\n -c Write to stdout" \
|
---|
| 1387 | "\n -f Force" \
|
---|
| 1388 |
|
---|
| 1389 | #define lzma_trivial_usage \
|
---|
| 1390 | "-d [-cf] [FILE]..."
|
---|
| 1391 | #define lzma_full_usage "\n\n" \
|
---|
| 1392 | "Decompress FILE (or stdin)\n" \
|
---|
| 1393 | "\nOptions:" \
|
---|
| 1394 | "\n -d Decompress" \
|
---|
| 1395 | "\n -c Write to stdout" \
|
---|
| 1396 | "\n -f Force" \
|
---|
| 1397 |
|
---|
| 1398 | #define lzcat_trivial_usage \
|
---|
| 1399 | "FILE"
|
---|
| 1400 | #define lzcat_full_usage "\n\n" \
|
---|
| 1401 | "Decompress to stdout"
|
---|
| 1402 |
|
---|
| 1403 | #define unxz_trivial_usage \
|
---|
| 1404 | "[-cf] [FILE]..."
|
---|
| 1405 | #define unxz_full_usage "\n\n" \
|
---|
| 1406 | "Decompress FILE (or stdin)\n" \
|
---|
| 1407 | "\nOptions:" \
|
---|
| 1408 | "\n -c Write to stdout" \
|
---|
| 1409 | "\n -f Force" \
|
---|
| 1410 |
|
---|
| 1411 | #define xz_trivial_usage \
|
---|
| 1412 | "-d [-cf] [FILE]..."
|
---|
| 1413 | #define xz_full_usage "\n\n" \
|
---|
| 1414 | "Decompress FILE (or stdin)\n" \
|
---|
| 1415 | "\nOptions:" \
|
---|
| 1416 | "\n -d Decompress" \
|
---|
| 1417 | "\n -c Write to stdout" \
|
---|
| 1418 | "\n -f Force" \
|
---|
| 1419 |
|
---|
| 1420 | #define xzcat_trivial_usage \
|
---|
| 1421 | "FILE"
|
---|
| 1422 | #define xzcat_full_usage "\n\n" \
|
---|
| 1423 | "Decompress to stdout"
|
---|
| 1424 |
|
---|
| 1425 | #define cal_trivial_usage \
|
---|
| 1426 | "[-jy] [[MONTH] YEAR]"
|
---|
| 1427 | #define cal_full_usage "\n\n" \
|
---|
| 1428 | "Display a calendar\n" \
|
---|
| 1429 | "\nOptions:" \
|
---|
| 1430 | "\n -j Use julian dates" \
|
---|
| 1431 | "\n -y Display the entire year" \
|
---|
| 1432 |
|
---|
| 1433 | #define cat_trivial_usage \
|
---|
| 1434 | "[FILE]..."
|
---|
| 1435 | #define cat_full_usage "\n\n" \
|
---|
| 1436 | "Concatenate FILEs and print them to stdout" \
|
---|
| 1437 |
|
---|
| 1438 | #define cat_example_usage \
|
---|
| 1439 | "$ cat /proc/uptime\n" \
|
---|
| 1440 | "110716.72 17.67"
|
---|
| 1441 |
|
---|
| 1442 | #define catv_trivial_usage \
|
---|
| 1443 | "[-etv] [FILE]..."
|
---|
| 1444 | #define catv_full_usage "\n\n" \
|
---|
| 1445 | "Display nonprinting characters as ^x or M-x\n" \
|
---|
| 1446 | "\nOptions:" \
|
---|
| 1447 | "\n -e End each line with $" \
|
---|
| 1448 | "\n -t Show tabs as ^I" \
|
---|
| 1449 | "\n -v Don't use ^x or M-x escapes" \
|
---|
| 1450 |
|
---|
| 1451 | #define chat_trivial_usage \
|
---|
| 1452 | "EXPECT [SEND [EXPECT [SEND...]]]"
|
---|
| 1453 | #define chat_full_usage "\n\n" \
|
---|
| 1454 | "Useful for interacting with a modem connected to stdin/stdout.\n" \
|
---|
| 1455 | "A script consists of one or more \"expect-send\" pairs of strings,\n" \
|
---|
| 1456 | "each pair is a pair of arguments. Example:\n" \
|
---|
| 1457 | "chat '' ATZ OK ATD123456 CONNECT '' ogin: pppuser word: ppppass '~'" \
|
---|
| 1458 |
|
---|
| 1459 | #define chattr_trivial_usage \
|
---|
| 1460 | "[-R] [-+=AacDdijsStTu] [-v VERSION] [FILE]..."
|
---|
| 1461 | #define chattr_full_usage "\n\n" \
|
---|
| 1462 | "Change file attributes on an ext2 fs\n" \
|
---|
| 1463 | "\nModifiers:" \
|
---|
| 1464 | "\n - Remove attributes" \
|
---|
| 1465 | "\n + Add attributes" \
|
---|
| 1466 | "\n = Set attributes" \
|
---|
| 1467 | "\nAttributes:" \
|
---|
| 1468 | "\n A Don't track atime" \
|
---|
| 1469 | "\n a Append mode only" \
|
---|
| 1470 | "\n c Enable compress" \
|
---|
| 1471 | "\n D Write dir contents synchronously" \
|
---|
| 1472 | "\n d Don't backup with dump" \
|
---|
| 1473 | "\n i Cannot be modified (immutable)" \
|
---|
| 1474 | "\n j Write all data to journal first" \
|
---|
| 1475 | "\n s Zero disk storage when deleted" \
|
---|
| 1476 | "\n S Write file contents synchronously" \
|
---|
| 1477 | "\n t Disable tail-merging of partial blocks with other files" \
|
---|
| 1478 | "\n u Allow file to be undeleted" \
|
---|
| 1479 | "\nOptions:" \
|
---|
| 1480 | "\n -R Recurse" \
|
---|
| 1481 | "\n -v Set the file's version/generation number" \
|
---|
| 1482 |
|
---|
| 1483 | #define chcon_trivial_usage \
|
---|
| 1484 | "[OPTIONS] CONTEXT FILE..." \
|
---|
| 1485 | "\n chcon [OPTIONS] [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE..." \
|
---|
| 1486 | IF_FEATURE_CHCON_LONG_OPTIONS( \
|
---|
| 1487 | "\n chcon [OPTIONS] --reference=RFILE FILE..." \
|
---|
| 1488 | )
|
---|
| 1489 | #define chcon_full_usage "\n\n" \
|
---|
| 1490 | "Change the security context of each FILE to CONTEXT\n" \
|
---|
| 1491 | IF_FEATURE_CHCON_LONG_OPTIONS( \
|
---|
| 1492 | "\n -v,--verbose Verbose" \
|
---|
| 1493 | "\n -c,--changes Report changes made" \
|
---|
| 1494 | "\n -h,--no-dereference Affect symlinks instead of their targets" \
|
---|
| 1495 | "\n -f,--silent,--quiet Suppress most error messages" \
|
---|
| 1496 | "\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \
|
---|
| 1497 | "\n -u,--user=USER Set user/role/type/range in the target" \
|
---|
| 1498 | "\n -r,--role=ROLE security context" \
|
---|
| 1499 | "\n -t,--type=TYPE" \
|
---|
| 1500 | "\n -l,--range=RANGE" \
|
---|
| 1501 | "\n -R,--recursive Recurse" \
|
---|
| 1502 | ) \
|
---|
| 1503 | IF_NOT_FEATURE_CHCON_LONG_OPTIONS( \
|
---|
| 1504 | "\n -v Verbose" \
|
---|
| 1505 | "\n -c Report changes made" \
|
---|
| 1506 | "\n -h Affect symlinks instead of their targets" \
|
---|
| 1507 | "\n -f Suppress most error messages" \
|
---|
| 1508 | "\n -u USER Set user/role/type/range in the target security context" \
|
---|
| 1509 | "\n -r ROLE" \
|
---|
| 1510 | "\n -t TYPE" \
|
---|
| 1511 | "\n -l RNG" \
|
---|
| 1512 | "\n -R Recurse" \
|
---|
| 1513 | )
|
---|
| 1514 |
|
---|
| 1515 | #define chmod_trivial_usage \
|
---|
| 1516 | "[-R"IF_DESKTOP("cvf")"] MODE[,MODE]... FILE..."
|
---|
| 1517 | #define chmod_full_usage "\n\n" \
|
---|
| 1518 | "Each MODE is one or more of the letters ugoa, one of the\n" \
|
---|
| 1519 | "symbols +-= and one or more of the letters rwxst\n" \
|
---|
| 1520 | "\nOptions:" \
|
---|
| 1521 | "\n -R Recurse" \
|
---|
| 1522 | IF_DESKTOP( \
|
---|
| 1523 | "\n -c List changed files" \
|
---|
| 1524 | "\n -v List all files" \
|
---|
| 1525 | "\n -f Hide errors" \
|
---|
| 1526 | )
|
---|
| 1527 | #define chmod_example_usage \
|
---|
| 1528 | "$ ls -l /tmp/foo\n" \
|
---|
| 1529 | "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \
|
---|
| 1530 | "$ chmod u+x /tmp/foo\n" \
|
---|
| 1531 | "$ ls -l /tmp/foo\n" \
|
---|
| 1532 | "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \
|
---|
| 1533 | "$ chmod 444 /tmp/foo\n" \
|
---|
| 1534 | "$ ls -l /tmp/foo\n" \
|
---|
| 1535 | "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
|
---|
| 1536 |
|
---|
| 1537 | #define chgrp_trivial_usage \
|
---|
| 1538 | "[-RhLHP"IF_DESKTOP("cvf")"]... GROUP FILE..."
|
---|
| 1539 | #define chgrp_full_usage "\n\n" \
|
---|
| 1540 | "Change the group membership of each FILE to GROUP\n" \
|
---|
| 1541 | "\nOptions:" \
|
---|
| 1542 | "\n -R Recurse" \
|
---|
| 1543 | "\n -h Affect symlinks instead of symlink targets" \
|
---|
| 1544 | "\n -L Traverse all symlinks to directories" \
|
---|
| 1545 | "\n -H Traverse symlinks on command line only" \
|
---|
| 1546 | "\n -P Don't traverse symlinks (default)" \
|
---|
| 1547 | IF_DESKTOP( \
|
---|
| 1548 | "\n -c List changed files" \
|
---|
| 1549 | "\n -v Verbose" \
|
---|
| 1550 | "\n -f Hide errors" \
|
---|
| 1551 | )
|
---|
| 1552 | #define chgrp_example_usage \
|
---|
| 1553 | "$ ls -l /tmp/foo\n" \
|
---|
| 1554 | "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
|
---|
| 1555 | "$ chgrp root /tmp/foo\n" \
|
---|
| 1556 | "$ ls -l /tmp/foo\n" \
|
---|
| 1557 | "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
|
---|
| 1558 |
|
---|
| 1559 | #define chown_trivial_usage \
|
---|
| 1560 | "[-RhLHP"IF_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
|
---|
| 1561 | #define chown_full_usage "\n\n" \
|
---|
| 1562 | "Change the owner and/or group of each FILE to OWNER and/or GROUP\n" \
|
---|
| 1563 | "\nOptions:" \
|
---|
| 1564 | "\n -R Recurse" \
|
---|
| 1565 | "\n -h Affect symlinks instead of symlink targets" \
|
---|
| 1566 | "\n -L Traverse all symlinks to directories" \
|
---|
| 1567 | "\n -H Traverse symlinks on command line only" \
|
---|
| 1568 | "\n -P Don't traverse symlinks (default)" \
|
---|
| 1569 | IF_DESKTOP( \
|
---|
| 1570 | "\n -c List changed files" \
|
---|
| 1571 | "\n -v List all files" \
|
---|
| 1572 | "\n -f Hide errors" \
|
---|
| 1573 | )
|
---|
| 1574 | #define chown_example_usage \
|
---|
| 1575 | "$ ls -l /tmp/foo\n" \
|
---|
| 1576 | "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
|
---|
| 1577 | "$ chown root /tmp/foo\n" \
|
---|
| 1578 | "$ ls -l /tmp/foo\n" \
|
---|
| 1579 | "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \
|
---|
| 1580 | "$ chown root.root /tmp/foo\n" \
|
---|
| 1581 | "ls -l /tmp/foo\n" \
|
---|
| 1582 | "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
|
---|
| 1583 |
|
---|
| 1584 | #define chpst_trivial_usage \
|
---|
| 1585 | "[-vP012] [-u USER[:GRP]] [-U USER[:GRP]] [-e DIR]\n" \
|
---|
| 1586 | " [-/ DIR] [-n NICE] [-m BYTES] [-d BYTES] [-o N]\n" \
|
---|
| 1587 | " [-p N] [-f BYTES] [-c BYTES] PROG ARGS"
|
---|
| 1588 | #define chpst_full_usage "\n\n" \
|
---|
| 1589 | "Change the process state, run PROG\n" \
|
---|
| 1590 | "\nOptions:" \
|
---|
| 1591 | "\n -u USER[:GRP] Set uid and gid" \
|
---|
| 1592 | "\n -U USER[:GRP] Set $UID and $GID in environment" \
|
---|
| 1593 | "\n -e DIR Set environment variables as specified by files" \
|
---|
| 1594 | "\n in DIR: file=1st_line_of_file" \
|
---|
| 1595 | "\n -/ DIR Chroot to DIR" \
|
---|
| 1596 | "\n -n NICE Add NICE to nice value" \
|
---|
| 1597 | "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES" \
|
---|
| 1598 | "\n -d BYTES Limit data segment" \
|
---|
| 1599 | "\n -o N Limit number of open files per process" \
|
---|
| 1600 | "\n -p N Limit number of processes per uid" \
|
---|
| 1601 | "\n -f BYTES Limit output file sizes" \
|
---|
| 1602 | "\n -c BYTES Limit core file size" \
|
---|
| 1603 | "\n -v Verbose" \
|
---|
| 1604 | "\n -P Create new process group" \
|
---|
| 1605 | "\n -0 Close stdin" \
|
---|
| 1606 | "\n -1 Close stdout" \
|
---|
| 1607 | "\n -2 Close stderr" \
|
---|
| 1608 |
|
---|
| 1609 | #define setuidgid_trivial_usage \
|
---|
| 1610 | "USER PROG ARGS"
|
---|
| 1611 | #define setuidgid_full_usage "\n\n" \
|
---|
| 1612 | "Set uid and gid to USER's uid and gid, drop supplementary group ids,\n" \
|
---|
| 1613 | "run PROG"
|
---|
| 1614 | #define envuidgid_trivial_usage \
|
---|
| 1615 | "USER PROG ARGS"
|
---|
| 1616 | #define envuidgid_full_usage "\n\n" \
|
---|
| 1617 | "Set $UID to USER's uid and $GID to USER's gid, run PROG"
|
---|
| 1618 | #define envdir_trivial_usage \
|
---|
| 1619 | "DIR PROG ARGS"
|
---|
| 1620 | #define envdir_full_usage "\n\n" \
|
---|
| 1621 | "Set various environment variables as specified by files\n" \
|
---|
| 1622 | "in the directory DIR, run PROG"
|
---|
| 1623 | #define softlimit_trivial_usage \
|
---|
| 1624 | "[-a BYTES] [-m BYTES] [-d BYTES] [-s BYTES] [-l BYTES]\n" \
|
---|
| 1625 | " [-f BYTES] [-c BYTES] [-r BYTES] [-o N] [-p N] [-t N]\n" \
|
---|
| 1626 | " PROG ARGS"
|
---|
| 1627 | #define softlimit_full_usage "\n\n" \
|
---|
| 1628 | "Set soft resource limits, then run PROG\n" \
|
---|
| 1629 | "\nOptions:" \
|
---|
| 1630 | "\n -a BYTES Limit total size of all segments" \
|
---|
| 1631 | "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES -a BYTES" \
|
---|
| 1632 | "\n -d BYTES Limit data segment" \
|
---|
| 1633 | "\n -s BYTES Limit stack segment" \
|
---|
| 1634 | "\n -l BYTES Limit locked memory size" \
|
---|
| 1635 | "\n -o N Limit number of open files per process" \
|
---|
| 1636 | "\n -p N Limit number of processes per uid" \
|
---|
| 1637 | "\nOptions controlling file sizes:" \
|
---|
| 1638 | "\n -f BYTES Limit output file sizes" \
|
---|
| 1639 | "\n -c BYTES Limit core file size" \
|
---|
| 1640 | "\nEfficiency opts:" \
|
---|
| 1641 | "\n -r BYTES Limit resident set size" \
|
---|
| 1642 | "\n -t N Limit CPU time, process receives" \
|
---|
| 1643 | "\n a SIGXCPU after N seconds" \
|
---|
| 1644 |
|
---|
| 1645 | #define chroot_trivial_usage \
|
---|
| 1646 | "NEWROOT [PROG ARGS]"
|
---|
| 1647 | #define chroot_full_usage "\n\n" \
|
---|
| 1648 | "Run PROG with root directory set to NEWROOT"
|
---|
| 1649 | #define chroot_example_usage \
|
---|
| 1650 | "$ ls -l /bin/ls\n" \
|
---|
| 1651 | "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
|
---|
| 1652 | "# mount /dev/hdc1 /mnt -t minix\n" \
|
---|
| 1653 | "# chroot /mnt\n" \
|
---|
| 1654 | "# ls -l /bin/ls\n" \
|
---|
| 1655 | "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n"
|
---|
| 1656 |
|
---|
| 1657 | #define chvt_trivial_usage \
|
---|
| 1658 | "N"
|
---|
| 1659 | #define chvt_full_usage "\n\n" \
|
---|
| 1660 | "Change the foreground virtual terminal to /dev/ttyN"
|
---|
| 1661 |
|
---|
| 1662 | #define cksum_trivial_usage \
|
---|
| 1663 | "FILES..."
|
---|
| 1664 | #define cksum_full_usage "\n\n" \
|
---|
| 1665 | "Calculate the CRC32 checksums of FILES"
|
---|
| 1666 |
|
---|
| 1667 | #define clear_trivial_usage \
|
---|
| 1668 | ""
|
---|
| 1669 | #define clear_full_usage "\n\n" \
|
---|
| 1670 | "Clear screen"
|
---|
| 1671 |
|
---|
| 1672 | #define cmp_trivial_usage \
|
---|
| 1673 | "[-l] [-s] FILE1 [FILE2" IF_DESKTOP(" [SKIP1 [SKIP2]]") "]"
|
---|
| 1674 | #define cmp_full_usage "\n\n" \
|
---|
| 1675 | "Compare FILE1 with FILE2 (or stdin)\n" \
|
---|
| 1676 | "\nOptions:" \
|
---|
| 1677 | "\n -l Write the byte numbers (decimal) and values (octal)" \
|
---|
| 1678 | "\n for all differing bytes" \
|
---|
| 1679 | "\n -s Quiet" \
|
---|
| 1680 |
|
---|
| 1681 | #define comm_trivial_usage \
|
---|
| 1682 | "[-123] FILE1 FILE2"
|
---|
| 1683 | #define comm_full_usage "\n\n" \
|
---|
| 1684 | "Compare FILE1 with FILE2\n" \
|
---|
| 1685 | "\nOptions:" \
|
---|
| 1686 | "\n -1 Suppress lines unique to FILE1" \
|
---|
| 1687 | "\n -2 Suppress lines unique to FILE2" \
|
---|
| 1688 | "\n -3 Suppress lines common to both files" \
|
---|
| 1689 |
|
---|
| 1690 | #define bbconfig_trivial_usage \
|
---|
| 1691 | ""
|
---|
| 1692 | #define bbconfig_full_usage "\n\n" \
|
---|
| 1693 | "Print the config file used by busybox build"
|
---|
| 1694 |
|
---|
| 1695 | #define chrt_trivial_usage \
|
---|
| 1696 | "[-prfom] [PRIO] [PID | PROG ARGS]"
|
---|
| 1697 | #define chrt_full_usage "\n\n" \
|
---|
| 1698 | "Change scheduling priority and class for a process\n" \
|
---|
| 1699 | "\nOptions:" \
|
---|
| 1700 | "\n -p Operate on PID" \
|
---|
| 1701 | "\n -r Set SCHED_RR class" \
|
---|
| 1702 | "\n -f Set SCHED_FIFO class" \
|
---|
| 1703 | "\n -o Set SCHED_OTHER class" \
|
---|
| 1704 | "\n -m Show min/max priorities" \
|
---|
| 1705 |
|
---|
| 1706 | #define chrt_example_usage \
|
---|
| 1707 | "$ chrt -r 4 sleep 900; x=$!\n" \
|
---|
| 1708 | "$ chrt -f -p 3 $x\n" \
|
---|
| 1709 | "You need CAP_SYS_NICE privileges to set scheduling attributes of a process"
|
---|
| 1710 |
|
---|
| 1711 | #define nice_trivial_usage \
|
---|
| 1712 | "[-n ADJUST] [PROG ARGS]"
|
---|
| 1713 | #define nice_full_usage "\n\n" \
|
---|
| 1714 | "Change scheduling priority, run PROG\n" \
|
---|
| 1715 | "\nOptions:" \
|
---|
| 1716 | "\n -n ADJUST Adjust priority by ADJUST" \
|
---|
| 1717 |
|
---|
| 1718 | #define renice_trivial_usage \
|
---|
| 1719 | "{{-n INCREMENT} | PRIORITY} [[-p | -g | -u] ID...]"
|
---|
| 1720 | #define renice_full_usage "\n\n" \
|
---|
| 1721 | "Change scheduling priority for a running process\n" \
|
---|
| 1722 | "\nOptions:" \
|
---|
| 1723 | "\n -n Adjust current nice value (smaller is faster)" \
|
---|
| 1724 | "\n -p Process id(s) (default)" \
|
---|
| 1725 | "\n -g Process group id(s)" \
|
---|
| 1726 | "\n -u Process user name(s) and/or id(s)" \
|
---|
| 1727 |
|
---|
| 1728 | #define ionice_trivial_usage \
|
---|
| 1729 | "[-c 1-3] [-n 0-7] [-p PID] [PROG]"
|
---|
| 1730 | #define ionice_full_usage "\n\n" \
|
---|
| 1731 | "Change I/O priority and class\n" \
|
---|
| 1732 | "\nOptions:" \
|
---|
| 1733 | "\n -c Class. 1:realtime 2:best-effort 3:idle" \
|
---|
| 1734 | "\n -n Priority" \
|
---|
| 1735 |
|
---|
| 1736 | #define cp_trivial_usage \
|
---|
| 1737 | "[OPTIONS] SOURCE DEST"
|
---|
| 1738 | #define cp_full_usage "\n\n" \
|
---|
| 1739 | "Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY\n" \
|
---|
| 1740 | "\nOptions:" \
|
---|
| 1741 | "\n -a Same as -dpR" \
|
---|
| 1742 | IF_SELINUX( \
|
---|
| 1743 | "\n -c Preserve security context" \
|
---|
| 1744 | ) \
|
---|
| 1745 | "\n -R,-r Recurse" \
|
---|
| 1746 | "\n -d,-P Preserve symlinks (default if -R)" \
|
---|
| 1747 | "\n -L Follow all symlinks" \
|
---|
| 1748 | "\n -H Follow symlinks on command line" \
|
---|
| 1749 | "\n -p Preserve file attributes if possible" \
|
---|
| 1750 | "\n -f Overwrite" \
|
---|
| 1751 | "\n -i Prompt before overwrite" \
|
---|
| 1752 | "\n -l,-s Create (sym)links" \
|
---|
| 1753 |
|
---|
| 1754 | #define cpio_trivial_usage \
|
---|
| 1755 | "[-dmvu] [-F FILE]" IF_FEATURE_CPIO_O(" [-H newc]") \
|
---|
| 1756 | " [-ti"IF_FEATURE_CPIO_O("o")"]" IF_FEATURE_CPIO_P(" [-p DIR]")
|
---|
| 1757 | #define cpio_full_usage "\n\n" \
|
---|
| 1758 | "Extract or list files from a cpio archive" \
|
---|
| 1759 | IF_FEATURE_CPIO_O(", or" \
|
---|
| 1760 | "\ncreate an archive" IF_FEATURE_CPIO_P(" (-o) or copy files (-p)") \
|
---|
| 1761 | " using file list on stdin" \
|
---|
| 1762 | ) \
|
---|
| 1763 | "\n" \
|
---|
| 1764 | "\nMain operation mode:" \
|
---|
| 1765 | "\n -t List" \
|
---|
| 1766 | "\n -i Extract" \
|
---|
| 1767 | IF_FEATURE_CPIO_O( \
|
---|
| 1768 | "\n -o Create (requires -H newc)" \
|
---|
| 1769 | ) \
|
---|
| 1770 | IF_FEATURE_CPIO_P( \
|
---|
| 1771 | "\n -p DIR Copy files to DIR" \
|
---|
| 1772 | ) \
|
---|
| 1773 | "\nOptions:" \
|
---|
| 1774 | "\n -d Make leading directories" \
|
---|
| 1775 | "\n -m Preserve mtime" \
|
---|
| 1776 | "\n -v Verbose" \
|
---|
| 1777 | "\n -u Overwrite" \
|
---|
| 1778 | "\n -F FILE Input (-t,-i,-p) or output (-o) file" \
|
---|
| 1779 | IF_FEATURE_CPIO_O( \
|
---|
| 1780 | "\n -H newc Archive format" \
|
---|
| 1781 | ) \
|
---|
| 1782 |
|
---|
| 1783 | #define crond_trivial_usage \
|
---|
| 1784 | "-fbS -l N " IF_FEATURE_CROND_D("-d N ") "-L LOGFILE -c DIR"
|
---|
| 1785 | #define crond_full_usage "\n\n" \
|
---|
| 1786 | " -f Foreground" \
|
---|
| 1787 | "\n -b Background (default)" \
|
---|
| 1788 | "\n -S Log to syslog (default)" \
|
---|
| 1789 | "\n -l Set log level. 0 is the most verbose, default 8" \
|
---|
| 1790 | IF_FEATURE_CROND_D( \
|
---|
| 1791 | "\n -d Set log level, log to stderr" \
|
---|
| 1792 | ) \
|
---|
| 1793 | "\n -L Log to file" \
|
---|
| 1794 | "\n -c Working dir" \
|
---|
| 1795 |
|
---|
| 1796 | #define crontab_trivial_usage \
|
---|
| 1797 | "[-c DIR] [-u USER] [-ler]|[FILE]"
|
---|
| 1798 | #define crontab_full_usage "\n\n" \
|
---|
| 1799 | " -c Crontab directory" \
|
---|
| 1800 | "\n -u User" \
|
---|
| 1801 | "\n -l List crontab" \
|
---|
| 1802 | "\n -e Edit crontab" \
|
---|
| 1803 | "\n -r Delete crontab" \
|
---|
| 1804 | "\n FILE Replace crontab by FILE ('-': stdin)" \
|
---|
| 1805 |
|
---|
| 1806 | #define cryptpw_trivial_usage \
|
---|
| 1807 | "[OPTIONS] [PASSWORD] [SALT]"
|
---|
| 1808 | /* We do support -s, we just don't mention it */
|
---|
| 1809 | #define cryptpw_full_usage "\n\n" \
|
---|
| 1810 | "Crypt the PASSWORD using crypt(3)\n" \
|
---|
| 1811 | "\nOptions:" \
|
---|
| 1812 | IF_LONG_OPTS( \
|
---|
| 1813 | "\n -P,--password-fd=N Read password from fd N" \
|
---|
| 1814 | /* "\n -s,--stdin Use stdin; like -P0" */ \
|
---|
| 1815 | "\n -m,--method=TYPE Encryption method TYPE" \
|
---|
| 1816 | "\n -S,--salt=SALT" \
|
---|
| 1817 | ) \
|
---|
| 1818 | IF_NOT_LONG_OPTS( \
|
---|
| 1819 | "\n -P N Read password from fd N" \
|
---|
| 1820 | /* "\n -s Use stdin; like -P0" */ \
|
---|
| 1821 | "\n -m TYPE Encryption method TYPE" \
|
---|
| 1822 | "\n -S SALT" \
|
---|
| 1823 | ) \
|
---|
| 1824 |
|
---|
| 1825 | /* mkpasswd is an alias to cryptpw */
|
---|
| 1826 |
|
---|
| 1827 | #define mkpasswd_trivial_usage \
|
---|
| 1828 | "[OPTIONS] [PASSWORD] [SALT]"
|
---|
| 1829 | /* We do support -s, we just don't mention it */
|
---|
| 1830 | #define mkpasswd_full_usage "\n\n" \
|
---|
| 1831 | "Crypt the PASSWORD using crypt(3)\n" \
|
---|
| 1832 | "\nOptions:" \
|
---|
| 1833 | IF_LONG_OPTS( \
|
---|
| 1834 | "\n -P,--password-fd=N Read password from fd N" \
|
---|
| 1835 | /* "\n -s,--stdin Use stdin; like -P0" */ \
|
---|
| 1836 | "\n -m,--method=TYPE Encryption method TYPE" \
|
---|
| 1837 | "\n -S,--salt=SALT" \
|
---|
| 1838 | ) \
|
---|
| 1839 | IF_NOT_LONG_OPTS( \
|
---|
| 1840 | "\n -P N Read password from fd N" \
|
---|
| 1841 | /* "\n -s Use stdin; like -P0" */ \
|
---|
| 1842 | "\n -m TYPE Encryption method TYPE" \
|
---|
| 1843 | "\n -S SALT" \
|
---|
| 1844 | ) \
|
---|
| 1845 |
|
---|
| 1846 | #define cut_trivial_usage \
|
---|
| 1847 | "[OPTIONS] [FILE]..."
|
---|
| 1848 | #define cut_full_usage "\n\n" \
|
---|
| 1849 | "Print selected fields from each input FILE to stdout\n" \
|
---|
| 1850 | "\nOptions:" \
|
---|
| 1851 | "\n -b LIST Output only bytes from LIST" \
|
---|
| 1852 | "\n -c LIST Output only characters from LIST" \
|
---|
| 1853 | "\n -d CHAR Use CHAR instead of tab as the field delimiter" \
|
---|
| 1854 | "\n -s Output only the lines containing delimiter" \
|
---|
| 1855 | "\n -f N Print only these fields" \
|
---|
| 1856 | "\n -n Ignored" \
|
---|
| 1857 |
|
---|
| 1858 | #define cut_example_usage \
|
---|
| 1859 | "$ echo \"Hello world\" | cut -f 1 -d ' '\n" \
|
---|
| 1860 | "Hello\n" \
|
---|
| 1861 | "$ echo \"Hello world\" | cut -f 2 -d ' '\n" \
|
---|
| 1862 | "world\n"
|
---|
| 1863 |
|
---|
| 1864 | #define dd_trivial_usage \
|
---|
| 1865 | "[if=FILE] [of=FILE] " IF_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \
|
---|
| 1866 | " [seek=N]" IF_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync|fsync]")
|
---|
| 1867 | #define dd_full_usage "\n\n" \
|
---|
| 1868 | "Copy a file with converting and formatting\n" \
|
---|
| 1869 | "\nOptions:" \
|
---|
| 1870 | "\n if=FILE Read from FILE instead of stdin" \
|
---|
| 1871 | "\n of=FILE Write to FILE instead of stdout" \
|
---|
| 1872 | "\n bs=N Read and write N bytes at a time" \
|
---|
| 1873 | IF_FEATURE_DD_IBS_OBS( \
|
---|
| 1874 | "\n ibs=N Read N bytes at a time" \
|
---|
| 1875 | ) \
|
---|
| 1876 | IF_FEATURE_DD_IBS_OBS( \
|
---|
| 1877 | "\n obs=N Write N bytes at a time" \
|
---|
| 1878 | ) \
|
---|
| 1879 | "\n count=N Copy only N input blocks" \
|
---|
| 1880 | "\n skip=N Skip N input blocks" \
|
---|
| 1881 | "\n seek=N Skip N output blocks" \
|
---|
| 1882 | IF_FEATURE_DD_IBS_OBS( \
|
---|
| 1883 | "\n conv=notrunc Don't truncate output file" \
|
---|
| 1884 | "\n conv=noerror Continue after read errors" \
|
---|
| 1885 | "\n conv=sync Pad blocks with zeros" \
|
---|
| 1886 | "\n conv=fsync Physically write data out before finishing" \
|
---|
| 1887 | ) \
|
---|
| 1888 | "\n" \
|
---|
| 1889 | "\nNumbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024)," \
|
---|
| 1890 | "\nMD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)" \
|
---|
| 1891 |
|
---|
| 1892 | #define dd_example_usage \
|
---|
| 1893 | "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \
|
---|
| 1894 | "4+0 records in\n" \
|
---|
| 1895 | "4+0 records out\n"
|
---|
| 1896 |
|
---|
| 1897 | #define deallocvt_trivial_usage \
|
---|
| 1898 | "[N]"
|
---|
| 1899 | #define deallocvt_full_usage "\n\n" \
|
---|
| 1900 | "Deallocate unused virtual terminal /dev/ttyN"
|
---|
| 1901 |
|
---|
| 1902 | #define delgroup_trivial_usage \
|
---|
| 1903 | IF_FEATURE_DEL_USER_FROM_GROUP("[USER] ")"GROUP"
|
---|
| 1904 | #define delgroup_full_usage "\n\n" \
|
---|
| 1905 | "Delete group GROUP from the system" \
|
---|
| 1906 | IF_FEATURE_DEL_USER_FROM_GROUP(" or user USER from group GROUP")
|
---|
| 1907 |
|
---|
| 1908 | #define deluser_trivial_usage \
|
---|
| 1909 | "USER"
|
---|
| 1910 | #define deluser_full_usage "\n\n" \
|
---|
| 1911 | "Delete USER from the system"
|
---|
| 1912 |
|
---|
| 1913 | #define devmem_trivial_usage \
|
---|
| 1914 | "ADDRESS [WIDTH [VALUE]]"
|
---|
| 1915 |
|
---|
| 1916 | #define devmem_full_usage "\n\n" \
|
---|
| 1917 | "Read/write from physical address\n" \
|
---|
| 1918 | "\n ADDRESS Address to act upon" \
|
---|
| 1919 | "\n WIDTH Width (8/16/...)" \
|
---|
| 1920 | "\n VALUE Data to be written" \
|
---|
| 1921 |
|
---|
| 1922 | #define devfsd_trivial_usage \
|
---|
| 1923 | "mntpnt [-v]" IF_DEVFSD_FG_NP("[-fg][-np]")
|
---|
| 1924 | #define devfsd_full_usage "\n\n" \
|
---|
| 1925 | "Manage devfs permissions and old device name symlinks\n" \
|
---|
| 1926 | "\nOptions:" \
|
---|
| 1927 | "\n mntpnt The mount point where devfs is mounted" \
|
---|
| 1928 | "\n -v Print the protocol version numbers for devfsd" \
|
---|
| 1929 | "\n and the kernel-side protocol version and exit" \
|
---|
| 1930 | IF_DEVFSD_FG_NP( \
|
---|
| 1931 | "\n -fg Run in foreground" \
|
---|
| 1932 | "\n -np Exit after parsing the configuration file" \
|
---|
| 1933 | "\n and processing synthetic REGISTER events," \
|
---|
| 1934 | "\n don't poll for events" \
|
---|
| 1935 | )
|
---|
| 1936 |
|
---|
| 1937 | #define df_trivial_usage \
|
---|
| 1938 | "[-Pk" \
|
---|
| 1939 | IF_FEATURE_HUMAN_READABLE("mh") \
|
---|
| 1940 | IF_FEATURE_DF_FANCY("ai] [-B SIZE") \
|
---|
| 1941 | "] [FILESYSTEM]..."
|
---|
| 1942 | #define df_full_usage "\n\n" \
|
---|
| 1943 | "Print filesystem usage statistics\n" \
|
---|
| 1944 | "\nOptions:" \
|
---|
| 1945 | "\n -P POSIX output format" \
|
---|
| 1946 | "\n -k 1024-byte blocks (default)" \
|
---|
| 1947 | IF_FEATURE_HUMAN_READABLE( \
|
---|
| 1948 | "\n -m 1M-byte blocks" \
|
---|
| 1949 | "\n -h Human readable (e.g. 1K 243M 2G)" \
|
---|
| 1950 | ) \
|
---|
| 1951 | IF_FEATURE_DF_FANCY( \
|
---|
| 1952 | "\n -a Show all filesystems" \
|
---|
| 1953 | "\n -i Inodes" \
|
---|
| 1954 | "\n -B SIZE Blocksize" \
|
---|
| 1955 | ) \
|
---|
| 1956 |
|
---|
| 1957 | #define df_example_usage \
|
---|
| 1958 | "$ df\n" \
|
---|
| 1959 | "Filesystem 1K-blocks Used Available Use% Mounted on\n" \
|
---|
| 1960 | "/dev/sda3 8690864 8553540 137324 98% /\n" \
|
---|
| 1961 | "/dev/sda1 64216 36364 27852 57% /boot\n" \
|
---|
| 1962 | "$ df /dev/sda3\n" \
|
---|
| 1963 | "Filesystem 1K-blocks Used Available Use% Mounted on\n" \
|
---|
| 1964 | "/dev/sda3 8690864 8553540 137324 98% /\n" \
|
---|
| 1965 | "$ POSIXLY_CORRECT=sure df /dev/sda3\n" \
|
---|
| 1966 | "Filesystem 512B-blocks Used Available Use% Mounted on\n" \
|
---|
| 1967 | "/dev/sda3 17381728 17107080 274648 98% /\n" \
|
---|
| 1968 | "$ POSIXLY_CORRECT=yep df -P /dev/sda3\n" \
|
---|
| 1969 | "Filesystem 512-blocks Used Available Capacity Mounted on\n" \
|
---|
| 1970 | "/dev/sda3 17381728 17107080 274648 98% /\n"
|
---|
| 1971 |
|
---|
| 1972 | #define dhcprelay_trivial_usage \
|
---|
| 1973 | "CLIENT_IFACE[,CLIENT_IFACE2]... SERVER_IFACE [SERVER_IP]"
|
---|
| 1974 | #define dhcprelay_full_usage "\n\n" \
|
---|
| 1975 | "Relay DHCP requests between clients and server" \
|
---|
| 1976 |
|
---|
| 1977 | #define diff_trivial_usage \
|
---|
| 1978 | "[-abBdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2"
|
---|
| 1979 | #define diff_full_usage "\n\n" \
|
---|
| 1980 | "Compare files line by line and output the differences between them.\n" \
|
---|
| 1981 | "This implementation supports unified diffs only.\n" \
|
---|
| 1982 | "\nOptions:" \
|
---|
| 1983 | "\n -a Treat all files as text" \
|
---|
| 1984 | "\n -b Ignore changes in the amount of whitespace" \
|
---|
| 1985 | "\n -B Ignore changes whose lines are all blank" \
|
---|
| 1986 | "\n -d Try hard to find a smaller set of changes" \
|
---|
| 1987 | "\n -i Ignore case differences" \
|
---|
| 1988 | "\n -L Use LABEL instead of the filename in the unified header" \
|
---|
| 1989 | "\n -N Treat absent files as empty" \
|
---|
| 1990 | "\n -q Output only whether files differ" \
|
---|
| 1991 | "\n -r Recurse" \
|
---|
| 1992 | "\n -S Start with FILE when comparing directories" \
|
---|
| 1993 | "\n -T Make tabs line up by prefixing a tab when necessary" \
|
---|
| 1994 | "\n -s Report when two files are the same" \
|
---|
| 1995 | "\n -t Expand tabs to spaces in output" \
|
---|
| 1996 | "\n -U Output LINES lines of context" \
|
---|
| 1997 | "\n -w Ignore all whitespace" \
|
---|
| 1998 |
|
---|
| 1999 | #define dirname_trivial_usage \
|
---|
| 2000 | "FILENAME"
|
---|
| 2001 | #define dirname_full_usage "\n\n" \
|
---|
| 2002 | "Strip non-directory suffix from FILENAME"
|
---|
| 2003 | #define dirname_example_usage \
|
---|
| 2004 | "$ dirname /tmp/foo\n" \
|
---|
| 2005 | "/tmp\n" \
|
---|
| 2006 | "$ dirname /tmp/foo/\n" \
|
---|
| 2007 | "/tmp\n"
|
---|
| 2008 |
|
---|
| 2009 | #define dmesg_trivial_usage \
|
---|
| 2010 | "[-c] [-n LEVEL] [-s SIZE]"
|
---|
| 2011 | #define dmesg_full_usage "\n\n" \
|
---|
| 2012 | "Print or control the kernel ring buffer\n" \
|
---|
| 2013 | "\nOptions:" \
|
---|
| 2014 | "\n -c Clear ring buffer after printing" \
|
---|
| 2015 | "\n -n LEVEL Set console logging level" \
|
---|
| 2016 | "\n -s SIZE Buffer size" \
|
---|
| 2017 |
|
---|
| 2018 | #define dnsd_trivial_usage \
|
---|
| 2019 | "[-dvs] [-c CONFFILE] [-t TTL_SEC] [-p PORT] [-i ADDR]"
|
---|
| 2020 | #define dnsd_full_usage "\n\n" \
|
---|
| 2021 | "Small static DNS server daemon\n" \
|
---|
| 2022 | "\nOptions:" \
|
---|
| 2023 | "\n -c FILE Config file" \
|
---|
| 2024 | "\n -t SEC TTL" \
|
---|
| 2025 | "\n -p PORT Listen on PORT" \
|
---|
| 2026 | "\n -i ADDR Listen on ADDR" \
|
---|
| 2027 | "\n -d Daemonize" \
|
---|
| 2028 | "\n -v Verbose" \
|
---|
| 2029 | "\n -s Send successful replies only. Use this if you want" \
|
---|
| 2030 | "\n to use /etc/resolv.conf with two nameserver lines:" \
|
---|
| 2031 | "\n nameserver DNSD_SERVER" \
|
---|
| 2032 | "\n nameserver NORNAL_DNS_SERVER" \
|
---|
| 2033 |
|
---|
| 2034 | #define dos2unix_trivial_usage \
|
---|
| 2035 | "[-ud] [FILE]"
|
---|
| 2036 | #define dos2unix_full_usage "\n\n" \
|
---|
| 2037 | "Convert FILE in-place from DOS to Unix format.\n" \
|
---|
| 2038 | "When no file is given, use stdin/stdout.\n" \
|
---|
| 2039 | "\nOptions:" \
|
---|
| 2040 | "\n -u dos2unix" \
|
---|
| 2041 | "\n -d unix2dos" \
|
---|
| 2042 |
|
---|
| 2043 | #define unix2dos_trivial_usage \
|
---|
| 2044 | "[-ud] [FILE]"
|
---|
| 2045 | #define unix2dos_full_usage "\n\n" \
|
---|
| 2046 | "Convert FILE in-place from Unix to DOS format.\n" \
|
---|
| 2047 | "When no file is given, use stdin/stdout.\n" \
|
---|
| 2048 | "\nOptions:" \
|
---|
| 2049 | "\n -u dos2unix" \
|
---|
| 2050 | "\n -d unix2dos" \
|
---|
| 2051 |
|
---|
| 2052 | #define dpkg_trivial_usage \
|
---|
| 2053 | "[-ilCPru] [-F OPT] PACKAGE"
|
---|
| 2054 | #define dpkg_full_usage "\n\n" \
|
---|
| 2055 | "Install, remove and manage Debian packages\n" \
|
---|
| 2056 | "\nOptions:" \
|
---|
| 2057 | IF_LONG_OPTS( \
|
---|
| 2058 | "\n -i,--install Install the package" \
|
---|
| 2059 | "\n -l,--list List of installed packages" \
|
---|
| 2060 | "\n --configure Configure an unpackaged package" \
|
---|
| 2061 | "\n -P,--purge Purge all files of a package" \
|
---|
| 2062 | "\n -r,--remove Remove all but the configuration files for a package" \
|
---|
| 2063 | "\n --unpack Unpack a package, but don't configure it" \
|
---|
| 2064 | "\n --force-depends Ignore dependency problems" \
|
---|
| 2065 | "\n --force-confnew Overwrite existing config files when installing" \
|
---|
| 2066 | "\n --force-confold Keep old config files when installing" \
|
---|
| 2067 | ) \
|
---|
| 2068 | IF_NOT_LONG_OPTS( \
|
---|
| 2069 | "\n -i Install the package" \
|
---|
| 2070 | "\n -l List of installed packages" \
|
---|
| 2071 | "\n -C Configure an unpackaged package" \
|
---|
| 2072 | "\n -P Purge all files of a package" \
|
---|
| 2073 | "\n -r Remove all but the configuration files for a package" \
|
---|
| 2074 | "\n -u Unpack a package, but don't configure it" \
|
---|
| 2075 | "\n -F depends Ignore dependency problems" \
|
---|
| 2076 | "\n -F confnew Overwrite existing config files when installing" \
|
---|
| 2077 | "\n -F confold Keep old config files when installing" \
|
---|
| 2078 | )
|
---|
| 2079 |
|
---|
| 2080 | #define dpkg_deb_trivial_usage \
|
---|
| 2081 | "[-cefxX] FILE [argument]"
|
---|
| 2082 | #define dpkg_deb_full_usage "\n\n" \
|
---|
| 2083 | "Perform actions on Debian packages (.debs)\n" \
|
---|
| 2084 | "\nOptions:" \
|
---|
| 2085 | "\n -c List contents of filesystem tree" \
|
---|
| 2086 | "\n -e Extract control files to [argument] directory" \
|
---|
| 2087 | "\n -f Display control field name starting with [argument]" \
|
---|
| 2088 | "\n -x Extract packages filesystem tree to directory" \
|
---|
| 2089 | "\n -X Verbose extract" \
|
---|
| 2090 |
|
---|
| 2091 | #define dpkg_deb_example_usage \
|
---|
| 2092 | "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"
|
---|
| 2093 |
|
---|
| 2094 | #define du_trivial_usage \
|
---|
| 2095 | "[-aHLdclsx" IF_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..."
|
---|
| 2096 | #define du_full_usage "\n\n" \
|
---|
| 2097 | "Summarize disk space used for each FILE and/or directory.\n" \
|
---|
| 2098 | "Disk space is printed in units of " \
|
---|
| 2099 | IF_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \
|
---|
| 2100 | IF_NOT_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \
|
---|
| 2101 | " bytes.\n" \
|
---|
| 2102 | "\nOptions:" \
|
---|
| 2103 | "\n -a Show file sizes too" \
|
---|
| 2104 | "\n -L Follow all symlinks" \
|
---|
| 2105 | "\n -H Follow symlinks on command line" \
|
---|
| 2106 | "\n -d N Limit output to directories (and files with -a) of depth < N" \
|
---|
| 2107 | "\n -c Show grand total" \
|
---|
| 2108 | "\n -l Count sizes many times if hard linked" \
|
---|
| 2109 | "\n -s Display only a total for each argument" \
|
---|
| 2110 | "\n -x Skip directories on different filesystems" \
|
---|
| 2111 | IF_FEATURE_HUMAN_READABLE( \
|
---|
| 2112 | "\n -h Sizes in human readable format (e.g., 1K 243M 2G )" \
|
---|
| 2113 | "\n -m Sizes in megabytes" \
|
---|
| 2114 | ) \
|
---|
| 2115 | "\n -k Sizes in kilobytes" \
|
---|
| 2116 | IF_FEATURE_DU_DEFAULT_BLOCKSIZE_1K(" (default)") \
|
---|
| 2117 |
|
---|
| 2118 | #define du_example_usage \
|
---|
| 2119 | "$ du\n" \
|
---|
| 2120 | "16 ./CVS\n" \
|
---|
| 2121 | "12 ./kernel-patches/CVS\n" \
|
---|
| 2122 | "80 ./kernel-patches\n" \
|
---|
| 2123 | "12 ./tests/CVS\n" \
|
---|
| 2124 | "36 ./tests\n" \
|
---|
| 2125 | "12 ./scripts/CVS\n" \
|
---|
| 2126 | "16 ./scripts\n" \
|
---|
| 2127 | "12 ./docs/CVS\n" \
|
---|
| 2128 | "104 ./docs\n" \
|
---|
| 2129 | "2417 .\n"
|
---|
| 2130 |
|
---|
| 2131 | #define dumpkmap_trivial_usage \
|
---|
| 2132 | "> keymap"
|
---|
| 2133 | #define dumpkmap_full_usage "\n\n" \
|
---|
| 2134 | "Print a binary keyboard translation table to stdout"
|
---|
| 2135 | #define dumpkmap_example_usage \
|
---|
| 2136 | "$ dumpkmap > keymap\n"
|
---|
| 2137 |
|
---|
| 2138 | #define dumpleases_trivial_usage \
|
---|
| 2139 | "[-r|-a] [-f LEASEFILE]"
|
---|
| 2140 | #define dumpleases_full_usage "\n\n" \
|
---|
| 2141 | "Display DHCP leases granted by udhcpd\n" \
|
---|
| 2142 | "\nOptions:" \
|
---|
| 2143 | IF_LONG_OPTS( \
|
---|
| 2144 | "\n -f,--file=FILE Lease file" \
|
---|
| 2145 | "\n -r,--remaining Show remaining time" \
|
---|
| 2146 | "\n -a,--absolute Show expiration time" \
|
---|
| 2147 | ) \
|
---|
| 2148 | IF_NOT_LONG_OPTS( \
|
---|
| 2149 | "\n -f FILE Lease file" \
|
---|
| 2150 | "\n -r Show remaining time" \
|
---|
| 2151 | "\n -a Show expiration time" \
|
---|
| 2152 | )
|
---|
| 2153 |
|
---|
| 2154 | /*
|
---|
| 2155 | #define e2fsck_trivial_usage \
|
---|
| 2156 | "[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \
|
---|
| 2157 | "[-I inode_buffer_blocks] [-P process_inode_size] " \
|
---|
| 2158 | "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \
|
---|
| 2159 | "[-E extended-options] device"
|
---|
| 2160 | #define e2fsck_full_usage "\n\n" \
|
---|
| 2161 | "Check ext2/ext3 file system\n" \
|
---|
| 2162 | "\nOptions:" \
|
---|
| 2163 | "\n -p Automatic repair (no questions)" \
|
---|
| 2164 | "\n -n Make no changes to the filesystem" \
|
---|
| 2165 | "\n -y Assume 'yes' to all questions" \
|
---|
| 2166 | "\n -c Check for bad blocks and add them to the badblock list" \
|
---|
| 2167 | "\n -f Force checking even if filesystem is marked clean" \
|
---|
| 2168 | "\n -v Verbose" \
|
---|
| 2169 | "\n -b superblock Use alternative superblock" \
|
---|
| 2170 | "\n -B blocksize Force blocksize when looking for superblock" \
|
---|
| 2171 | "\n -j journal Set location of the external journal" \
|
---|
| 2172 | "\n -l file Add to badblocks list" \
|
---|
| 2173 | "\n -L file Set badblocks list" \
|
---|
| 2174 | */
|
---|
| 2175 |
|
---|
| 2176 | #define echo_trivial_usage \
|
---|
| 2177 | IF_FEATURE_FANCY_ECHO("[-neE] ") "[ARG]..."
|
---|
| 2178 | #define echo_full_usage "\n\n" \
|
---|
| 2179 | "Print the specified ARGs to stdout" \
|
---|
| 2180 | IF_FEATURE_FANCY_ECHO( "\n" \
|
---|
| 2181 | "\nOptions:" \
|
---|
| 2182 | "\n -n Suppress trailing newline" \
|
---|
| 2183 | "\n -e Interpret backslash escapes (i.e., \\t=tab)" \
|
---|
| 2184 | "\n -E Don't interpret backslash escapes (default)" \
|
---|
| 2185 | )
|
---|
| 2186 | #define echo_example_usage \
|
---|
| 2187 | "$ echo \"Erik is cool\"\n" \
|
---|
| 2188 | "Erik is cool\n" \
|
---|
| 2189 | IF_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \
|
---|
| 2190 | "Erik\n" \
|
---|
| 2191 | "is\n" \
|
---|
| 2192 | "cool\n" \
|
---|
| 2193 | "$ echo \"Erik\\nis\\ncool\"\n" \
|
---|
| 2194 | "Erik\\nis\\ncool\n")
|
---|
| 2195 |
|
---|
| 2196 | #define eject_trivial_usage \
|
---|
| 2197 | "[-t] [-T] [DEVICE]"
|
---|
| 2198 | #define eject_full_usage "\n\n" \
|
---|
| 2199 | "Eject DEVICE or default /dev/cdrom\n" \
|
---|
| 2200 | "\nOptions:" \
|
---|
| 2201 | IF_FEATURE_EJECT_SCSI( \
|
---|
| 2202 | "\n -s SCSI device" \
|
---|
| 2203 | ) \
|
---|
| 2204 | "\n -t Close tray" \
|
---|
| 2205 | "\n -T Open/close tray (toggle)" \
|
---|
| 2206 |
|
---|
| 2207 | #define ed_trivial_usage ""
|
---|
| 2208 | #define ed_full_usage ""
|
---|
| 2209 |
|
---|
| 2210 | #define env_trivial_usage \
|
---|
| 2211 | "[-iu] [-] [name=value]... [PROG ARGS]"
|
---|
| 2212 | #define env_full_usage "\n\n" \
|
---|
| 2213 | "Print the current environment or run PROG after setting up\n" \
|
---|
| 2214 | "the specified environment\n" \
|
---|
| 2215 | "\nOptions:" \
|
---|
| 2216 | "\n -, -i Start with an empty environment" \
|
---|
| 2217 | "\n -u Remove variable from the environment" \
|
---|
| 2218 |
|
---|
| 2219 | #define ether_wake_trivial_usage \
|
---|
| 2220 | "[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC"
|
---|
| 2221 | #define ether_wake_full_usage "\n\n" \
|
---|
| 2222 | "Send a magic packet to wake up sleeping machines.\n" \
|
---|
| 2223 | "MAC must be a station address (00:11:22:33:44:55) or\n" \
|
---|
| 2224 | "a hostname with a known 'ethers' entry.\n" \
|
---|
| 2225 | "\nOptions:" \
|
---|
| 2226 | "\n -b Send wake-up packet to the broadcast address" \
|
---|
| 2227 | "\n -i iface Interface to use (default eth0)" \
|
---|
| 2228 | "\n -p pass Append four or six byte password PW to the packet" \
|
---|
| 2229 |
|
---|
| 2230 | #define expand_trivial_usage \
|
---|
| 2231 | "[-i] [-t N] [FILE]..."
|
---|
| 2232 | #define expand_full_usage "\n\n" \
|
---|
| 2233 | "Convert tabs to spaces, writing to stdout\n" \
|
---|
| 2234 | "\nOptions:" \
|
---|
| 2235 | IF_FEATURE_EXPAND_LONG_OPTIONS( \
|
---|
| 2236 | "\n -i,--initial Don't convert tabs after non blanks" \
|
---|
| 2237 | "\n -t,--tabs=N Tabstops every N chars" \
|
---|
| 2238 | ) \
|
---|
| 2239 | IF_NOT_FEATURE_EXPAND_LONG_OPTIONS( \
|
---|
| 2240 | "\n -i Don't convert tabs after non blanks" \
|
---|
| 2241 | "\n -t Tabstops every N chars" \
|
---|
| 2242 | )
|
---|
| 2243 |
|
---|
| 2244 | #define expr_trivial_usage \
|
---|
| 2245 | "EXPRESSION"
|
---|
| 2246 | #define expr_full_usage "\n\n" \
|
---|
| 2247 | "Print the value of EXPRESSION to stdout\n" \
|
---|
| 2248 | "\n" \
|
---|
| 2249 | "EXPRESSION may be:\n" \
|
---|
| 2250 | " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
|
---|
| 2251 | " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
|
---|
| 2252 | " ARG1 < ARG2 1 if ARG1 is less than ARG2, else 0. Similarly:\n" \
|
---|
| 2253 | " ARG1 <= ARG2\n" \
|
---|
| 2254 | " ARG1 = ARG2\n" \
|
---|
| 2255 | " ARG1 != ARG2\n" \
|
---|
| 2256 | " ARG1 >= ARG2\n" \
|
---|
| 2257 | " ARG1 > ARG2\n" \
|
---|
| 2258 | " ARG1 + ARG2 Sum of ARG1 and ARG2. Similarly:\n" \
|
---|
| 2259 | " ARG1 - ARG2\n" \
|
---|
| 2260 | " ARG1 * ARG2\n" \
|
---|
| 2261 | " ARG1 / ARG2\n" \
|
---|
| 2262 | " ARG1 % ARG2\n" \
|
---|
| 2263 | " STRING : REGEXP Anchored pattern match of REGEXP in STRING\n" \
|
---|
| 2264 | " match STRING REGEXP Same as STRING : REGEXP\n" \
|
---|
| 2265 | " substr STRING POS LENGTH Substring of STRING, POS counted from 1\n" \
|
---|
| 2266 | " index STRING CHARS Index in STRING where any CHARS is found, or 0\n" \
|
---|
| 2267 | " length STRING Length of STRING\n" \
|
---|
| 2268 | " quote TOKEN Interpret TOKEN as a string, even if\n" \
|
---|
| 2269 | " it is a keyword like 'match' or an\n" \
|
---|
| 2270 | " operator like '/'\n" \
|
---|
| 2271 | " (EXPRESSION) Value of EXPRESSION\n" \
|
---|
| 2272 | "\n" \
|
---|
| 2273 | "Beware that many operators need to be escaped or quoted for shells.\n" \
|
---|
| 2274 | "Comparisons are arithmetic if both ARGs are numbers, else\n" \
|
---|
| 2275 | "lexicographical. Pattern matches return the string matched between\n" \
|
---|
| 2276 | "\\( and \\) or null; if \\( and \\) are not used, they return the number\n" \
|
---|
| 2277 | "of characters matched or 0."
|
---|
| 2278 |
|
---|
| 2279 | #define fakeidentd_trivial_usage \
|
---|
| 2280 | "[-fiw] [-b ADDR] [STRING]"
|
---|
| 2281 | #define fakeidentd_full_usage "\n\n" \
|
---|
| 2282 | "Provide fake ident (auth) service\n" \
|
---|
| 2283 | "\nOptions:" \
|
---|
| 2284 | "\n -f Run in foreground" \
|
---|
| 2285 | "\n -i Inetd mode" \
|
---|
| 2286 | "\n -w Inetd 'wait' mode" \
|
---|
| 2287 | "\n -b ADDR Bind to specified address" \
|
---|
| 2288 | "\n STRING Ident answer string (default: nobody)" \
|
---|
| 2289 |
|
---|
| 2290 | #define false_trivial_usage \
|
---|
| 2291 | ""
|
---|
| 2292 | #define false_full_usage "\n\n" \
|
---|
| 2293 | "Return an exit code of FALSE (1)"
|
---|
| 2294 |
|
---|
| 2295 | #define false_example_usage \
|
---|
| 2296 | "$ false\n" \
|
---|
| 2297 | "$ echo $?\n" \
|
---|
| 2298 | "1\n"
|
---|
| 2299 |
|
---|
| 2300 | #define fbsplash_trivial_usage \
|
---|
| 2301 | "-s IMGFILE [-c] [-d DEV] [-i INIFILE] [-f CMD]"
|
---|
| 2302 | #define fbsplash_full_usage "\n\n" \
|
---|
| 2303 | "Options:" \
|
---|
| 2304 | "\n -s Image" \
|
---|
| 2305 | "\n -c Hide cursor" \
|
---|
| 2306 | "\n -d Framebuffer device (default /dev/fb0)" \
|
---|
| 2307 | "\n -i Config file (var=value):" \
|
---|
| 2308 | "\n BAR_LEFT,BAR_TOP,BAR_WIDTH,BAR_HEIGHT" \
|
---|
| 2309 | "\n BAR_R,BAR_G,BAR_B" \
|
---|
| 2310 | "\n -f Control pipe (else exit after drawing image)" \
|
---|
| 2311 | "\n commands: 'NN' (% for progress bar) or 'exit'" \
|
---|
| 2312 |
|
---|
| 2313 | #define fbset_trivial_usage \
|
---|
| 2314 | "[OPTIONS] [MODE]"
|
---|
| 2315 | #define fbset_full_usage "\n\n" \
|
---|
| 2316 | "Show and modify frame buffer settings"
|
---|
| 2317 |
|
---|
| 2318 | #define fbset_example_usage \
|
---|
| 2319 | "$ fbset\n" \
|
---|
| 2320 | "mode \"1024x768-76\"\n" \
|
---|
| 2321 | " # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \
|
---|
| 2322 | " geometry 1024 768 1024 768 16\n" \
|
---|
| 2323 | " timings 12714 128 32 16 4 128 4\n" \
|
---|
| 2324 | " accel false\n" \
|
---|
| 2325 | " rgba 5/11,6/5,5/0,0/0\n" \
|
---|
| 2326 | "endmode\n"
|
---|
| 2327 |
|
---|
| 2328 | #define fdflush_trivial_usage \
|
---|
| 2329 | "DEVICE"
|
---|
| 2330 | #define fdflush_full_usage "\n\n" \
|
---|
| 2331 | "Force floppy disk drive to detect disk change"
|
---|
| 2332 |
|
---|
| 2333 | #define fdformat_trivial_usage \
|
---|
| 2334 | "[-n] DEVICE"
|
---|
| 2335 | #define fdformat_full_usage "\n\n" \
|
---|
| 2336 | "Format floppy disk\n" \
|
---|
| 2337 | "\nOptions:" \
|
---|
| 2338 | "\n -n Don't verify after format" \
|
---|
| 2339 |
|
---|
| 2340 | /* Looks like someone forgot to add this to config system */
|
---|
| 2341 | #ifndef ENABLE_FEATURE_FDISK_BLKSIZE
|
---|
| 2342 | # define ENABLE_FEATURE_FDISK_BLKSIZE 0
|
---|
| 2343 | # define IF_FEATURE_FDISK_BLKSIZE(a)
|
---|
| 2344 | #endif
|
---|
| 2345 |
|
---|
| 2346 | #define fdisk_trivial_usage \
|
---|
| 2347 | "[-ul" IF_FEATURE_FDISK_BLKSIZE("s") "] " \
|
---|
| 2348 | "[-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
|
---|
| 2349 | #define fdisk_full_usage "\n\n" \
|
---|
| 2350 | "Change partition table\n" \
|
---|
| 2351 | "\nOptions:" \
|
---|
| 2352 | "\n -u Start and End are in sectors (instead of cylinders)" \
|
---|
| 2353 | "\n -l Show partition table for each DISK, then exit" \
|
---|
| 2354 | IF_FEATURE_FDISK_BLKSIZE( \
|
---|
| 2355 | "\n -s Show partition sizes in kb for each DISK, then exit" \
|
---|
| 2356 | ) \
|
---|
| 2357 | "\n -b 2048 (for certain MO disks) use 2048-byte sectors" \
|
---|
| 2358 | "\n -C CYLINDERS Set number of cylinders/heads/sectors" \
|
---|
| 2359 | "\n -H HEADS" \
|
---|
| 2360 | "\n -S SECTORS" \
|
---|
| 2361 |
|
---|
| 2362 | #define fgconsole_trivial_usage \
|
---|
| 2363 | ""
|
---|
| 2364 | #define fgconsole_full_usage "\n\n" \
|
---|
| 2365 | "Get active console"
|
---|
| 2366 |
|
---|
| 2367 | #define findfs_trivial_usage \
|
---|
| 2368 | "LABEL=label or UUID=uuid"
|
---|
| 2369 | #define findfs_full_usage "\n\n" \
|
---|
| 2370 | "Find a filesystem device based on a label or UUID"
|
---|
| 2371 | #define findfs_example_usage \
|
---|
| 2372 | "$ findfs LABEL=MyDevice"
|
---|
| 2373 |
|
---|
| 2374 | #define flash_lock_trivial_usage \
|
---|
| 2375 | "MTD_DEVICE OFFSET SECTORS"
|
---|
| 2376 | #define flash_lock_full_usage "\n\n" \
|
---|
| 2377 | "Lock part or all of an MTD device. If SECTORS is -1, then all sectors\n" \
|
---|
| 2378 | "will be locked, regardless of the value of OFFSET"
|
---|
| 2379 |
|
---|
| 2380 | #define flash_unlock_trivial_usage \
|
---|
| 2381 | "MTD_DEVICE"
|
---|
| 2382 | #define flash_unlock_full_usage "\n\n" \
|
---|
| 2383 | "Unlock an MTD device"
|
---|
| 2384 |
|
---|
| 2385 | #define flash_eraseall_trivial_usage \
|
---|
| 2386 | "[-jq] MTD_DEVICE"
|
---|
| 2387 | #define flash_eraseall_full_usage "\n\n" \
|
---|
| 2388 | "Erase an MTD device\n" \
|
---|
| 2389 | "\nOptions:" \
|
---|
| 2390 | "\n -j Format the device for jffs2" \
|
---|
| 2391 | "\n -q Don't display progress messages" \
|
---|
| 2392 |
|
---|
| 2393 | #define flashcp_trivial_usage \
|
---|
| 2394 | "-v FILE MTD_DEVICE"
|
---|
| 2395 | #define flashcp_full_usage "\n\n" \
|
---|
| 2396 | "Copy an image to MTD device\n" \
|
---|
| 2397 | "\nOptions:" \
|
---|
| 2398 | "\n -v Verbose" \
|
---|
| 2399 |
|
---|
| 2400 | #define flock_trivial_usage \
|
---|
| 2401 | "[-sxun] FD|{FILE [-c] PROG ARGS}"
|
---|
| 2402 | #define flock_full_usage "\n\n" \
|
---|
| 2403 | "[Un]lock file descriptor, or lock FILE, run PROG\n" \
|
---|
| 2404 | "\nOptions:" \
|
---|
| 2405 | "\n -s Shared lock" \
|
---|
| 2406 | "\n -x Exclusive lock (default)" \
|
---|
| 2407 | "\n -u Unlock FD" \
|
---|
| 2408 | "\n -n Fail rather than wait" \
|
---|
| 2409 |
|
---|
| 2410 | #define fold_trivial_usage \
|
---|
| 2411 | "[-bs] [-w WIDTH] [FILE]..."
|
---|
| 2412 | #define fold_full_usage "\n\n" \
|
---|
| 2413 | "Wrap input lines in each FILE (or stdin), writing to stdout\n" \
|
---|
| 2414 | "\nOptions:" \
|
---|
| 2415 | "\n -b Count bytes rather than columns" \
|
---|
| 2416 | "\n -s Break at spaces" \
|
---|
| 2417 | "\n -w Use WIDTH columns instead of 80" \
|
---|
| 2418 |
|
---|
| 2419 | #define free_trivial_usage \
|
---|
| 2420 | "" IF_DESKTOP("[-b/k/m/g]")
|
---|
| 2421 | #define free_full_usage "\n\n" \
|
---|
| 2422 | "Display the amount of free and used system memory"
|
---|
| 2423 | #define free_example_usage \
|
---|
| 2424 | "$ free\n" \
|
---|
| 2425 | " total used free shared buffers\n" \
|
---|
| 2426 | " Mem: 257628 248724 8904 59644 93124\n" \
|
---|
| 2427 | " Swap: 128516 8404 120112\n" \
|
---|
| 2428 | "Total: 386144 257128 129016\n" \
|
---|
| 2429 |
|
---|
| 2430 | #define freeramdisk_trivial_usage \
|
---|
| 2431 | "DEVICE"
|
---|
| 2432 | #define freeramdisk_full_usage "\n\n" \
|
---|
| 2433 | "Free all memory used by the specified ramdisk"
|
---|
| 2434 | #define freeramdisk_example_usage \
|
---|
| 2435 | "$ freeramdisk /dev/ram2\n"
|
---|
| 2436 |
|
---|
| 2437 | #define fsck_trivial_usage \
|
---|
| 2438 | "[-ANPRTV] [-C FD] [-t FSTYPE] [FS_OPTS] [BLOCKDEV]..."
|
---|
| 2439 | #define fsck_full_usage "\n\n" \
|
---|
| 2440 | "Check and repair filesystems\n" \
|
---|
| 2441 | "\nOptions:" \
|
---|
| 2442 | "\n -A Walk /etc/fstab and check all filesystems" \
|
---|
| 2443 | "\n -N Don't execute, just show what would be done" \
|
---|
| 2444 | "\n -P With -A, check filesystems in parallel" \
|
---|
| 2445 | "\n -R With -A, skip the root filesystem" \
|
---|
| 2446 | "\n -T Don't show title on startup" \
|
---|
| 2447 | "\n -V Verbose" \
|
---|
| 2448 | "\n -C n Write status information to specified filedescriptor" \
|
---|
| 2449 | "\n -t TYPE List of filesystem types to check" \
|
---|
| 2450 |
|
---|
| 2451 | #define fsck_minix_trivial_usage \
|
---|
| 2452 | "[-larvsmf] BLOCKDEV"
|
---|
| 2453 | #define fsck_minix_full_usage "\n\n" \
|
---|
| 2454 | "Check MINIX filesystem\n" \
|
---|
| 2455 | "\nOptions:" \
|
---|
| 2456 | "\n -l List all filenames" \
|
---|
| 2457 | "\n -r Perform interactive repairs" \
|
---|
| 2458 | "\n -a Perform automatic repairs" \
|
---|
| 2459 | "\n -v Verbose" \
|
---|
| 2460 | "\n -s Output superblock information" \
|
---|
| 2461 | "\n -m Show \"mode not cleared\" warnings" \
|
---|
| 2462 | "\n -f Force file system check" \
|
---|
| 2463 |
|
---|
| 2464 | #define ftpd_trivial_usage \
|
---|
| 2465 | "[-wvS] [-t N] [-T N] [DIR]"
|
---|
| 2466 | #define ftpd_full_usage "\n\n" \
|
---|
| 2467 | "Anonymous FTP server\n" \
|
---|
| 2468 | "\n" \
|
---|
| 2469 | "ftpd should be used as an inetd service.\n" \
|
---|
| 2470 | "ftpd's line for inetd.conf:\n" \
|
---|
| 2471 | " 21 stream tcp nowait root ftpd ftpd /files/to/serve\n" \
|
---|
| 2472 | "It also can be ran from tcpsvd:\n" \
|
---|
| 2473 | " tcpsvd -vE 0.0.0.0 21 ftpd /files/to/serve\n" \
|
---|
| 2474 | "\nOptions:" \
|
---|
| 2475 | "\n -w Allow upload" \
|
---|
| 2476 | "\n -v Log to stderr" \
|
---|
| 2477 | "\n -S Log to syslog" \
|
---|
| 2478 | "\n -t,-T Idle and absolute timeouts" \
|
---|
| 2479 | "\n DIR Change root to this directory" \
|
---|
| 2480 |
|
---|
| 2481 | #define ftpget_trivial_usage \
|
---|
| 2482 | "[OPTIONS] HOST [LOCAL_FILE] REMOTE_FILE"
|
---|
| 2483 | #define ftpget_full_usage "\n\n" \
|
---|
| 2484 | "Retrieve a remote file via FTP\n" \
|
---|
| 2485 | "\nOptions:" \
|
---|
| 2486 | IF_FEATURE_FTPGETPUT_LONG_OPTIONS( \
|
---|
| 2487 | "\n -c,--continue Continue previous transfer" \
|
---|
| 2488 | "\n -v,--verbose Verbose" \
|
---|
| 2489 | "\n -u,--username Username" \
|
---|
| 2490 | "\n -p,--password Password" \
|
---|
| 2491 | "\n -P,--port Port number" \
|
---|
| 2492 | ) \
|
---|
| 2493 | IF_NOT_FEATURE_FTPGETPUT_LONG_OPTIONS( \
|
---|
| 2494 | "\n -c Continue previous transfer" \
|
---|
| 2495 | "\n -v Verbose" \
|
---|
| 2496 | "\n -u Username" \
|
---|
| 2497 | "\n -p Password" \
|
---|
| 2498 | "\n -P Port number" \
|
---|
| 2499 | )
|
---|
| 2500 |
|
---|
| 2501 | #define ftpput_trivial_usage \
|
---|
| 2502 | "[OPTIONS] HOST [REMOTE_FILE] LOCAL_FILE"
|
---|
| 2503 | #define ftpput_full_usage "\n\n" \
|
---|
| 2504 | "Store a local file on a remote machine via FTP\n" \
|
---|
| 2505 | "\nOptions:" \
|
---|
| 2506 | IF_FEATURE_FTPGETPUT_LONG_OPTIONS( \
|
---|
| 2507 | "\n -v,--verbose Verbose" \
|
---|
| 2508 | "\n -u,--username Username" \
|
---|
| 2509 | "\n -p,--password Password" \
|
---|
| 2510 | "\n -P,--port Port number" \
|
---|
| 2511 | ) \
|
---|
| 2512 | IF_NOT_FEATURE_FTPGETPUT_LONG_OPTIONS( \
|
---|
| 2513 | "\n -v Verbose" \
|
---|
| 2514 | "\n -u Username" \
|
---|
| 2515 | "\n -p Password" \
|
---|
| 2516 | "\n -P Port number" \
|
---|
| 2517 | )
|
---|
| 2518 |
|
---|
| 2519 | #define fuser_trivial_usage \
|
---|
| 2520 | "[OPTIONS] FILE or PORT/PROTO"
|
---|
| 2521 | #define fuser_full_usage "\n\n" \
|
---|
| 2522 | "Find processes which use FILEs or PORTs\n" \
|
---|
| 2523 | "\nOptions:" \
|
---|
| 2524 | "\n -m Find processes which use same fs as FILEs" \
|
---|
| 2525 | "\n -4,-6 Search only IPv4/IPv6 space" \
|
---|
| 2526 | "\n -s Don't display PIDs" \
|
---|
| 2527 | "\n -k Kill found processes" \
|
---|
| 2528 | "\n -SIGNAL Signal to send (default: KILL)" \
|
---|
| 2529 |
|
---|
| 2530 | #define getenforce_trivial_usage NOUSAGE_STR
|
---|
| 2531 | #define getenforce_full_usage ""
|
---|
| 2532 |
|
---|
| 2533 | #define getopt_trivial_usage \
|
---|
| 2534 | "[OPTIONS]"
|
---|
| 2535 | #define getopt_full_usage "\n\n" \
|
---|
| 2536 | "Options:" \
|
---|
| 2537 | IF_LONG_OPTS( \
|
---|
| 2538 | "\n -a,--alternative Allow long options starting with single -" \
|
---|
| 2539 | "\n -l,--longoptions=longopts Long options to be recognized" \
|
---|
| 2540 | "\n -n,--name=progname The name under which errors are reported" \
|
---|
| 2541 | "\n -o,--options=optstring Short options to be recognized" \
|
---|
| 2542 | "\n -q,--quiet Disable error reporting by getopt(3)" \
|
---|
| 2543 | "\n -Q,--quiet-output No normal output" \
|
---|
| 2544 | "\n -s,--shell=shell Set shell quoting conventions" \
|
---|
| 2545 | "\n -T,--test Test for getopt(1) version" \
|
---|
| 2546 | "\n -u,--unquoted Don't quote the output" \
|
---|
| 2547 | ) \
|
---|
| 2548 | IF_NOT_LONG_OPTS( \
|
---|
| 2549 | "\n -a Allow long options starting with single -" \
|
---|
| 2550 | "\n -l longopts Long options to be recognized" \
|
---|
| 2551 | "\n -n progname The name under which errors are reported" \
|
---|
| 2552 | "\n -o optstring Short options to be recognized" \
|
---|
| 2553 | "\n -q Disable error reporting by getopt(3)" \
|
---|
| 2554 | "\n -Q No normal output" \
|
---|
| 2555 | "\n -s shell Set shell quoting conventions" \
|
---|
| 2556 | "\n -T Test for getopt(1) version" \
|
---|
| 2557 | "\n -u Don't quote the output" \
|
---|
| 2558 | )
|
---|
| 2559 | #define getopt_example_usage \
|
---|
| 2560 | "$ cat getopt.test\n" \
|
---|
| 2561 | "#!/bin/sh\n" \
|
---|
| 2562 | "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
|
---|
| 2563 | " -n 'example.busybox' -- \"$@\"`\n" \
|
---|
| 2564 | "if [ $? != 0 ]; then exit 1; fi\n" \
|
---|
| 2565 | "eval set -- \"$GETOPT\"\n" \
|
---|
| 2566 | "while true; do\n" \
|
---|
| 2567 | " case $1 in\n" \
|
---|
| 2568 | " -a|--a-long) echo \"Option a\"; shift;;\n" \
|
---|
| 2569 | " -b|--b-long) echo \"Option b, argument '$2'\"; shift 2;;\n" \
|
---|
| 2570 | " -c|--c-long)\n" \
|
---|
| 2571 | " case \"$2\" in\n" \
|
---|
| 2572 | " \"\") echo \"Option c, no argument\"; shift 2;;\n" \
|
---|
| 2573 | " *) echo \"Option c, argument '$2'\"; shift 2;;\n" \
|
---|
| 2574 | " esac;;\n" \
|
---|
| 2575 | " --) shift; break;;\n" \
|
---|
| 2576 | " *) echo \"Internal error!\"; exit 1;;\n" \
|
---|
| 2577 | " esac\n" \
|
---|
| 2578 | "done\n"
|
---|
| 2579 |
|
---|
| 2580 | #define getsebool_trivial_usage \
|
---|
| 2581 | "-a or getsebool boolean..."
|
---|
| 2582 | #define getsebool_full_usage "\n\n" \
|
---|
| 2583 | " -a Show all selinux booleans"
|
---|
| 2584 |
|
---|
| 2585 | #define getty_trivial_usage \
|
---|
| 2586 | "[OPTIONS] BAUD_RATE TTY [TERMTYPE]"
|
---|
| 2587 | #define getty_full_usage "\n\n" \
|
---|
| 2588 | "Open a tty, prompt for a login name, then invoke /bin/login\n" \
|
---|
| 2589 | "\nOptions:" \
|
---|
| 2590 | "\n -h Enable hardware (RTS/CTS) flow control" \
|
---|
| 2591 | "\n -i Don't display /etc/issue before running login" \
|
---|
| 2592 | "\n -L Local line, don't do carrier detect" \
|
---|
| 2593 | "\n -m Get baud rate from modem's CONNECT status message" \
|
---|
| 2594 | "\n -w Wait for a CR or LF before sending /etc/issue" \
|
---|
| 2595 | "\n -n Don't prompt the user for a login name" \
|
---|
| 2596 | "\n -f ISSUE_FILE Display ISSUE_FILE instead of /etc/issue" \
|
---|
| 2597 | "\n -l LOGIN Invoke LOGIN instead of /bin/login" \
|
---|
| 2598 | "\n -t SEC Terminate after SEC if no username is read" \
|
---|
| 2599 | "\n -I INITSTR Send INITSTR before anything else" \
|
---|
| 2600 | "\n -H HOST Log HOST into the utmp file as the hostname" \
|
---|
| 2601 |
|
---|
| 2602 | #define gunzip_trivial_usage \
|
---|
| 2603 | "[-cft] [FILE]..."
|
---|
| 2604 | #define gunzip_full_usage "\n\n" \
|
---|
| 2605 | "Decompress FILEs (or stdin)\n" \
|
---|
| 2606 | "\nOptions:" \
|
---|
| 2607 | "\n -c Write to stdout" \
|
---|
| 2608 | "\n -f Force" \
|
---|
| 2609 | "\n -t Test file integrity" \
|
---|
| 2610 |
|
---|
| 2611 | #define gunzip_example_usage \
|
---|
| 2612 | "$ ls -la /tmp/BusyBox*\n" \
|
---|
| 2613 | "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \
|
---|
| 2614 | "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \
|
---|
| 2615 | "$ ls -la /tmp/BusyBox*\n" \
|
---|
| 2616 | "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n"
|
---|
| 2617 |
|
---|
| 2618 | #define gzip_trivial_usage \
|
---|
| 2619 | "[-cfd] [FILE]..."
|
---|
| 2620 | #define gzip_full_usage "\n\n" \
|
---|
| 2621 | "Compress FILEs (or stdin)\n" \
|
---|
| 2622 | "\nOptions:" \
|
---|
| 2623 | "\n -d Decompress" \
|
---|
| 2624 | "\n -c Write to stdout" \
|
---|
| 2625 | "\n -f Force" \
|
---|
| 2626 |
|
---|
| 2627 | #define gzip_example_usage \
|
---|
| 2628 | "$ ls -la /tmp/busybox*\n" \
|
---|
| 2629 | "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \
|
---|
| 2630 | "$ gzip /tmp/busybox.tar\n" \
|
---|
| 2631 | "$ ls -la /tmp/busybox*\n" \
|
---|
| 2632 | "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"
|
---|
| 2633 |
|
---|
| 2634 | #define hdparm_trivial_usage \
|
---|
| 2635 | "[OPTIONS] [DEVICE]"
|
---|
| 2636 | #define hdparm_full_usage "\n\n" \
|
---|
| 2637 | "Options:" \
|
---|
| 2638 | "\n -a Get/set fs readahead" \
|
---|
| 2639 | "\n -A Set drive read-lookahead flag (0/1)" \
|
---|
| 2640 | "\n -b Get/set bus state (0 == off, 1 == on, 2 == tristate)" \
|
---|
| 2641 | "\n -B Set Advanced Power Management setting (1-255)" \
|
---|
| 2642 | "\n -c Get/set IDE 32-bit IO setting" \
|
---|
| 2643 | "\n -C Check IDE power mode status" \
|
---|
| 2644 | IF_FEATURE_HDPARM_HDIO_GETSET_DMA( \
|
---|
| 2645 | "\n -d Get/set using_dma flag") \
|
---|
| 2646 | "\n -D Enable/disable drive defect-mgmt" \
|
---|
| 2647 | "\n -f Flush buffer cache for device on exit" \
|
---|
| 2648 | "\n -g Display drive geometry" \
|
---|
| 2649 | "\n -h Display terse usage information" \
|
---|
| 2650 | IF_FEATURE_HDPARM_GET_IDENTITY( \
|
---|
| 2651 | "\n -i Display drive identification") \
|
---|
| 2652 | IF_FEATURE_HDPARM_GET_IDENTITY( \
|
---|
| 2653 | "\n -I Detailed/current information directly from drive") \
|
---|
| 2654 | "\n -k Get/set keep_settings_over_reset flag (0/1)" \
|
---|
| 2655 | "\n -K Set drive keep_features_over_reset flag (0/1)" \
|
---|
| 2656 | "\n -L Set drive doorlock (0/1) (removable harddisks only)" \
|
---|
| 2657 | "\n -m Get/set multiple sector count" \
|
---|
| 2658 | "\n -n Get/set ignore-write-errors flag (0/1)" \
|
---|
| 2659 | "\n -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)" \
|
---|
| 2660 | "\n -P Set drive prefetch count" \
|
---|
| 2661 | /* "\n -q Change next setting quietly" - not supported ib bbox */ \
|
---|
| 2662 | "\n -Q Get/set DMA tagged-queuing depth (if supported)" \
|
---|
| 2663 | "\n -r Get/set readonly flag (DANGEROUS to set)" \
|
---|
| 2664 | IF_FEATURE_HDPARM_HDIO_SCAN_HWIF( \
|
---|
| 2665 | "\n -R Register an IDE interface (DANGEROUS)") \
|
---|
| 2666 | "\n -S Set standby (spindown) timeout" \
|
---|
| 2667 | "\n -t Perform device read timings" \
|
---|
| 2668 | "\n -T Perform cache read timings" \
|
---|
| 2669 | "\n -u Get/set unmaskirq flag (0/1)" \
|
---|
| 2670 | IF_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \
|
---|
| 2671 | "\n -U Unregister an IDE interface (DANGEROUS)") \
|
---|
| 2672 | "\n -v Defaults; same as -mcudkrag for IDE drives" \
|
---|
| 2673 | "\n -V Display program version and exit immediately" \
|
---|
| 2674 | IF_FEATURE_HDPARM_HDIO_DRIVE_RESET( \
|
---|
| 2675 | "\n -w Perform device reset (DANGEROUS)") \
|
---|
| 2676 | "\n -W Set drive write-caching flag (0/1) (DANGEROUS)" \
|
---|
| 2677 | IF_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \
|
---|
| 2678 | "\n -x Tristate device for hotswap (0/1) (DANGEROUS)") \
|
---|
| 2679 | "\n -X Set IDE xfer mode (DANGEROUS)" \
|
---|
| 2680 | "\n -y Put IDE drive in standby mode" \
|
---|
| 2681 | "\n -Y Put IDE drive to sleep" \
|
---|
| 2682 | "\n -Z Disable Seagate auto-powersaving mode" \
|
---|
| 2683 | "\n -z Reread partition table" \
|
---|
| 2684 |
|
---|
| 2685 | #define head_trivial_usage \
|
---|
| 2686 | "[OPTIONS] [FILE]..."
|
---|
| 2687 | #define head_full_usage "\n\n" \
|
---|
| 2688 | "Print first 10 lines of each FILE (or stdin) to stdout.\n" \
|
---|
| 2689 | "With more than one FILE, precede each with a filename header.\n" \
|
---|
| 2690 | "\nOptions:" \
|
---|
| 2691 | "\n -n N[kbm] Print first N lines" \
|
---|
| 2692 | IF_FEATURE_FANCY_HEAD( \
|
---|
| 2693 | "\n -c N[kbm] Print first N bytes" \
|
---|
| 2694 | "\n -q Never print headers" \
|
---|
| 2695 | "\n -v Always print headers" \
|
---|
| 2696 | ) \
|
---|
| 2697 | "\n" \
|
---|
| 2698 | "\nN may be suffixed by k (x1024), b (x512), or m (x1024^2)." \
|
---|
| 2699 |
|
---|
| 2700 | #define head_example_usage \
|
---|
| 2701 | "$ head -n 2 /etc/passwd\n" \
|
---|
| 2702 | "root:x:0:0:root:/root:/bin/bash\n" \
|
---|
| 2703 | "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
|
---|
| 2704 |
|
---|
| 2705 | #define tail_trivial_usage \
|
---|
| 2706 | "[OPTIONS] [FILE]..."
|
---|
| 2707 | #define tail_full_usage "\n\n" \
|
---|
| 2708 | "Print last 10 lines of each FILE (or stdin) to stdout.\n" \
|
---|
| 2709 | "With more than one FILE, precede each with a filename header.\n" \
|
---|
| 2710 | "\nOptions:" \
|
---|
| 2711 | "\n -f Print data as file grows" \
|
---|
| 2712 | IF_FEATURE_FANCY_TAIL( \
|
---|
| 2713 | "\n -s SECONDS Wait SECONDS between reads with -f" \
|
---|
| 2714 | ) \
|
---|
| 2715 | "\n -n N[kbm] Print last N lines" \
|
---|
| 2716 | IF_FEATURE_FANCY_TAIL( \
|
---|
| 2717 | "\n -c N[kbm] Print last N bytes" \
|
---|
| 2718 | "\n -q Never print headers" \
|
---|
| 2719 | "\n -v Always print headers" \
|
---|
| 2720 | "\n" \
|
---|
| 2721 | "\nN may be suffixed by k (x1024), b (x512), or m (x1024^2)." \
|
---|
| 2722 | "\nIf N starts with a '+', output begins with the Nth item from the start" \
|
---|
| 2723 | "\nof each file, not from the end." \
|
---|
| 2724 | ) \
|
---|
| 2725 |
|
---|
| 2726 | #define tail_example_usage \
|
---|
| 2727 | "$ tail -n 1 /etc/resolv.conf\n" \
|
---|
| 2728 | "nameserver 10.0.0.1\n"
|
---|
| 2729 |
|
---|
| 2730 | #define hexdump_trivial_usage \
|
---|
| 2731 | "[-bcCdefnosvx" IF_FEATURE_HEXDUMP_REVERSE("R") "] [FILE]..."
|
---|
| 2732 | #define hexdump_full_usage "\n\n" \
|
---|
| 2733 | "Display FILEs (or stdin) in a user specified format\n" \
|
---|
| 2734 | "\nOptions:" \
|
---|
| 2735 | "\n -b One-byte octal display" \
|
---|
| 2736 | "\n -c One-byte character display" \
|
---|
| 2737 | "\n -C Canonical hex+ASCII, 16 bytes per line" \
|
---|
| 2738 | "\n -d Two-byte decimal display" \
|
---|
| 2739 | "\n -e FORMAT STRING" \
|
---|
| 2740 | "\n -f FORMAT FILE" \
|
---|
| 2741 | "\n -n LENGTH Interpret only LENGTH bytes of input" \
|
---|
| 2742 | "\n -o Two-byte octal display" \
|
---|
| 2743 | "\n -s OFFSET Skip OFFSET bytes" \
|
---|
| 2744 | "\n -v Display all input data" \
|
---|
| 2745 | "\n -x Two-byte hexadecimal display" \
|
---|
| 2746 | IF_FEATURE_HEXDUMP_REVERSE( \
|
---|
| 2747 | "\n -R Reverse of 'hexdump -Cv'") \
|
---|
| 2748 |
|
---|
| 2749 | #define hd_trivial_usage \
|
---|
| 2750 | "FILE..."
|
---|
| 2751 | #define hd_full_usage "\n\n" \
|
---|
| 2752 | "hd is an alias for hexdump -C"
|
---|
| 2753 |
|
---|
| 2754 | #define hostid_trivial_usage \
|
---|
| 2755 | ""
|
---|
| 2756 | #define hostid_full_usage "\n\n" \
|
---|
| 2757 | "Print out a unique 32-bit identifier for the machine"
|
---|
| 2758 |
|
---|
| 2759 | #define hostname_trivial_usage \
|
---|
| 2760 | "[OPTIONS] [HOSTNAME | -F FILE]"
|
---|
| 2761 | #define hostname_full_usage "\n\n" \
|
---|
| 2762 | "Get or set hostname or DNS domain name\n" \
|
---|
| 2763 | "\nOptions:" \
|
---|
| 2764 | "\n -s Short" \
|
---|
| 2765 | "\n -i Addresses for the hostname" \
|
---|
| 2766 | "\n -d DNS domain name" \
|
---|
| 2767 | "\n -f Fully qualified domain name" \
|
---|
| 2768 | "\n -F FILE Use FILE's content as hostname" \
|
---|
| 2769 |
|
---|
| 2770 | #define hostname_example_usage \
|
---|
| 2771 | "$ hostname\n" \
|
---|
| 2772 | "sage\n"
|
---|
| 2773 |
|
---|
| 2774 | #define dnsdomainname_trivial_usage NOUSAGE_STR
|
---|
| 2775 | #define dnsdomainname_full_usage ""
|
---|
| 2776 |
|
---|
| 2777 | #define httpd_trivial_usage \
|
---|
| 2778 | "[-ifv[v]]" \
|
---|
| 2779 | " [-c CONFFILE]" \
|
---|
| 2780 | " [-p [IP:]PORT]" \
|
---|
| 2781 | IF_FEATURE_HTTPD_SETUID(" [-u USER[:GRP]]") \
|
---|
| 2782 | IF_FEATURE_HTTPD_BASIC_AUTH(" [-r REALM]") \
|
---|
| 2783 | " [-h HOME]\n" \
|
---|
| 2784 | "or httpd -d/-e" IF_FEATURE_HTTPD_AUTH_MD5("/-m") " STRING"
|
---|
| 2785 | #define httpd_full_usage "\n\n" \
|
---|
| 2786 | "Listen for incoming HTTP requests\n" \
|
---|
| 2787 | "\nOptions:" \
|
---|
| 2788 | "\n -i Inetd mode" \
|
---|
| 2789 | "\n -f Don't daemonize" \
|
---|
| 2790 | "\n -v[v] Verbose" \
|
---|
| 2791 | "\n -p [IP:]PORT Bind to IP:PORT (default *:80)" \
|
---|
| 2792 | IF_FEATURE_HTTPD_SETUID( \
|
---|
| 2793 | "\n -u USER[:GRP] Set uid/gid after binding to port") \
|
---|
| 2794 | IF_FEATURE_HTTPD_BASIC_AUTH( \
|
---|
| 2795 | "\n -r REALM Authentication Realm for Basic Authentication") \
|
---|
| 2796 | "\n -h HOME Home directory (default .)" \
|
---|
| 2797 | "\n -c FILE Configuration file (default {/etc,HOME}/httpd.conf)" \
|
---|
| 2798 | IF_FEATURE_HTTPD_AUTH_MD5( \
|
---|
| 2799 | "\n -m STRING MD5 crypt STRING") \
|
---|
| 2800 | "\n -e STRING HTML encode STRING" \
|
---|
| 2801 | "\n -d STRING URL decode STRING" \
|
---|
| 2802 |
|
---|
| 2803 | #define hwclock_trivial_usage \
|
---|
| 2804 | IF_FEATURE_HWCLOCK_LONG_OPTIONS( \
|
---|
| 2805 | "[-r|--show] [-s|--hctosys] [-w|--systohc]" \
|
---|
| 2806 | " [-l|--localtime] [-u|--utc]" \
|
---|
| 2807 | " [-f FILE]" \
|
---|
| 2808 | ) \
|
---|
| 2809 | IF_NOT_FEATURE_HWCLOCK_LONG_OPTIONS( \
|
---|
| 2810 | "[-r] [-s] [-w] [-l] [-u] [-f FILE]" \
|
---|
| 2811 | )
|
---|
| 2812 | #define hwclock_full_usage "\n\n" \
|
---|
| 2813 | "Query and set hardware clock (RTC)\n" \
|
---|
| 2814 | "\nOptions:" \
|
---|
| 2815 | "\n -r Show hardware clock time" \
|
---|
| 2816 | "\n -s Set system time from hardware clock" \
|
---|
| 2817 | "\n -w Set hardware clock to system time" \
|
---|
| 2818 | "\n -u Hardware clock is in UTC" \
|
---|
| 2819 | "\n -l Hardware clock is in local time" \
|
---|
| 2820 | "\n -f FILE Use specified device (e.g. /dev/rtc2)" \
|
---|
| 2821 |
|
---|
| 2822 | #define id_trivial_usage \
|
---|
| 2823 | "[OPTIONS] [USER]"
|
---|
| 2824 | #define id_full_usage "\n\n" \
|
---|
| 2825 | "Print information about USER or the current user\n" \
|
---|
| 2826 | "\nOptions:" \
|
---|
| 2827 | IF_SELINUX( \
|
---|
| 2828 | "\n -Z Security context" \
|
---|
| 2829 | ) \
|
---|
| 2830 | "\n -u User ID" \
|
---|
| 2831 | "\n -g Group ID" \
|
---|
| 2832 | "\n -G Supplementary group IDs" \
|
---|
| 2833 | "\n -n Print names instead of numbers" \
|
---|
| 2834 | "\n -r Print real ID instead of effective ID" \
|
---|
| 2835 |
|
---|
| 2836 | #define id_example_usage \
|
---|
| 2837 | "$ id\n" \
|
---|
| 2838 | "uid=1000(andersen) gid=1000(andersen)\n"
|
---|
| 2839 |
|
---|
| 2840 | #define ifconfig_trivial_usage \
|
---|
| 2841 | IF_FEATURE_IFCONFIG_STATUS("[-a]") " interface [address]"
|
---|
| 2842 | #define ifconfig_full_usage "\n\n" \
|
---|
| 2843 | "Configure a network interface\n" \
|
---|
| 2844 | "\nOptions:" \
|
---|
| 2845 | "\n" \
|
---|
| 2846 | IF_FEATURE_IPV6( \
|
---|
| 2847 | " [add ADDRESS[/PREFIXLEN]]\n") \
|
---|
| 2848 | IF_FEATURE_IPV6( \
|
---|
| 2849 | " [del ADDRESS[/PREFIXLEN]]\n") \
|
---|
| 2850 | " [[-]broadcast [ADDRESS]] [[-]pointopoint [ADDRESS]]\n" \
|
---|
| 2851 | " [netmask ADDRESS] [dstaddr ADDRESS]\n" \
|
---|
| 2852 | IF_FEATURE_IFCONFIG_SLIP( \
|
---|
| 2853 | " [outfill NN] [keepalive NN]\n") \
|
---|
| 2854 | " " IF_FEATURE_IFCONFIG_HW("[hw ether" IF_FEATURE_HWIB("|infiniband")" ADDRESS] ") "[metric NN] [mtu NN]\n" \
|
---|
| 2855 | " [[-]trailers] [[-]arp] [[-]allmulti]\n" \
|
---|
| 2856 | " [multicast] [[-]promisc] [txqueuelen NN] [[-]dynamic]\n" \
|
---|
| 2857 | IF_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \
|
---|
| 2858 | " [mem_start NN] [io_addr NN] [irq NN]\n") \
|
---|
| 2859 | " [up|down] ..."
|
---|
| 2860 |
|
---|
| 2861 | #define ifenslave_trivial_usage \
|
---|
| 2862 | "[-cdf] MASTER_IFACE SLAVE_IFACE..."
|
---|
| 2863 | #define ifenslave_full_usage "\n\n" \
|
---|
| 2864 | "Configure network interfaces for parallel routing\n" \
|
---|
| 2865 | "\nOptions:" \
|
---|
| 2866 | "\n -c,--change-active Change active slave" \
|
---|
| 2867 | "\n -d,--detach Remove slave interface from bonding device" \
|
---|
| 2868 | "\n -f,--force Force, even if interface is not Ethernet" \
|
---|
| 2869 | /* "\n -r,--receive-slave Create a receive-only slave" */
|
---|
| 2870 |
|
---|
| 2871 | #define ifenslave_example_usage \
|
---|
| 2872 | "To create a bond device, simply follow these three steps:\n" \
|
---|
| 2873 | "- ensure that the required drivers are properly loaded:\n" \
|
---|
| 2874 | " # modprobe bonding ; modprobe <3c59x|eepro100|pcnet32|tulip|...>\n" \
|
---|
| 2875 | "- assign an IP address to the bond device:\n" \
|
---|
| 2876 | " # ifconfig bond0 <addr> netmask <mask> broadcast <bcast>\n" \
|
---|
| 2877 | "- attach all the interfaces you need to the bond device:\n" \
|
---|
| 2878 | " # ifenslave bond0 eth0 eth1 eth2\n" \
|
---|
| 2879 | " If bond0 didn't have a MAC address, it will take eth0's. Then, all\n" \
|
---|
| 2880 | " interfaces attached AFTER this assignment will get the same MAC addr.\n\n" \
|
---|
| 2881 | " To detach a dead interface without setting the bond device down:\n" \
|
---|
| 2882 | " # ifenslave -d bond0 eth1\n\n" \
|
---|
| 2883 | " To set the bond device down and automatically release all the slaves:\n" \
|
---|
| 2884 | " # ifconfig bond0 down\n\n" \
|
---|
| 2885 | " To change active slave:\n" \
|
---|
| 2886 | " # ifenslave -c bond0 eth0\n" \
|
---|
| 2887 |
|
---|
| 2888 | #define ifplugd_trivial_usage \
|
---|
| 2889 | "[OPTIONS]"
|
---|
| 2890 | #define ifplugd_full_usage "\n\n" \
|
---|
| 2891 | "Network interface plug detection daemon\n" \
|
---|
| 2892 | "\nOptions:" \
|
---|
| 2893 | "\n -n Don't daemonize" \
|
---|
| 2894 | "\n -s Don't log to syslog" \
|
---|
| 2895 | "\n -i IFACE Interface" \
|
---|
| 2896 | "\n -f/-F Treat link detection error as link down/link up" \
|
---|
| 2897 | "\n (otherwise exit on error)" \
|
---|
| 2898 | "\n -a Don't up interface at each link probe" \
|
---|
| 2899 | "\n -M Monitor creation/destruction of interface" \
|
---|
| 2900 | "\n (otherwise it must exist)" \
|
---|
| 2901 | "\n -r PROG Script to run" \
|
---|
| 2902 | "\n -x ARG Extra argument for script" \
|
---|
| 2903 | "\n -I Don't exit on nonzero exit code from script" \
|
---|
| 2904 | "\n -p Don't run script on daemon startup" \
|
---|
| 2905 | "\n -q Don't run script on daemon quit" \
|
---|
| 2906 | "\n -l Run script on startup even if no cable is detected" \
|
---|
| 2907 | "\n -t SECS Poll time in seconds" \
|
---|
| 2908 | "\n -u SECS Delay before running script after link up" \
|
---|
| 2909 | "\n -d SECS Delay after link down" \
|
---|
| 2910 | "\n -m MODE API mode (mii, priv, ethtool, wlan, iff, auto)" \
|
---|
| 2911 | "\n -k Kill running daemon" \
|
---|
| 2912 |
|
---|
| 2913 | #define ifup_trivial_usage \
|
---|
| 2914 | "[-an"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] [-i FILE] IFACE..."
|
---|
| 2915 | #define ifup_full_usage "\n\n" \
|
---|
| 2916 | "Options:" \
|
---|
| 2917 | "\n -a De/configure all interfaces automatically" \
|
---|
| 2918 | "\n -i FILE Use FILE for interface definitions" \
|
---|
| 2919 | "\n -n Print out what would happen, but don't do it" \
|
---|
| 2920 | IF_FEATURE_IFUPDOWN_MAPPING( \
|
---|
| 2921 | "\n (note: doesn't disable mappings)" \
|
---|
| 2922 | "\n -m Don't run any mappings" \
|
---|
| 2923 | ) \
|
---|
| 2924 | "\n -v Print out what would happen before doing it" \
|
---|
| 2925 | "\n -f Force de/configuration" \
|
---|
| 2926 |
|
---|
| 2927 | #define ifdown_trivial_usage \
|
---|
| 2928 | "[-an"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] [-i FILE] IFACE..."
|
---|
| 2929 | #define ifdown_full_usage "\n\n" \
|
---|
| 2930 | "Options:" \
|
---|
| 2931 | "\n -a De/configure all interfaces automatically" \
|
---|
| 2932 | "\n -i FILE Use FILE for interface definitions" \
|
---|
| 2933 | "\n -n Print out what would happen, but don't do it" \
|
---|
| 2934 | IF_FEATURE_IFUPDOWN_MAPPING( \
|
---|
| 2935 | "\n (note: doesn't disable mappings)" \
|
---|
| 2936 | "\n -m Don't run any mappings" \
|
---|
| 2937 | ) \
|
---|
| 2938 | "\n -v Print out what would happen before doing it" \
|
---|
| 2939 | "\n -f Force de/configuration" \
|
---|
| 2940 |
|
---|
| 2941 | #define inetd_trivial_usage \
|
---|
| 2942 | "[-fe] [-q N] [-R N] [CONFFILE]"
|
---|
| 2943 | #define inetd_full_usage "\n\n" \
|
---|
| 2944 | "Listen for network connections and launch programs\n" \
|
---|
| 2945 | "\nOptions:" \
|
---|
| 2946 | "\n -f Run in foreground" \
|
---|
| 2947 | "\n -e Log to stderr" \
|
---|
| 2948 | "\n -q N Socket listen queue (default: 128)" \
|
---|
| 2949 | "\n -R N Pause services after N connects/min" \
|
---|
| 2950 | "\n (default: 0 - disabled)" \
|
---|
| 2951 |
|
---|
| 2952 | #define inotifyd_trivial_usage \
|
---|
| 2953 | "PROG FILE1[:MASK]..."
|
---|
| 2954 | #define inotifyd_full_usage "\n\n" \
|
---|
| 2955 | "Run PROG on filesystem changes." \
|
---|
| 2956 | "\nWhen a filesystem event matching MASK occurs on FILEn," \
|
---|
| 2957 | "\nPROG ACTUAL_EVENTS FILEn [SUBFILE] is run." \
|
---|
| 2958 | "\nEvents:" \
|
---|
| 2959 | "\n a File is accessed" \
|
---|
| 2960 | "\n c File is modified" \
|
---|
| 2961 | "\n e Metadata changed" \
|
---|
| 2962 | "\n w Writable file is closed" \
|
---|
| 2963 | "\n 0 Unwritable file is closed" \
|
---|
| 2964 | "\n r File is opened" \
|
---|
| 2965 | "\n D File is deleted" \
|
---|
| 2966 | "\n M File is moved" \
|
---|
| 2967 | "\n u Backing fs is unmounted" \
|
---|
| 2968 | "\n o Event queue overflowed" \
|
---|
| 2969 | "\n x File can't be watched anymore" \
|
---|
| 2970 | "\nIf watching a directory:" \
|
---|
| 2971 | "\n m Subfile is moved into dir" \
|
---|
| 2972 | "\n y Subfile is moved out of dir" \
|
---|
| 2973 | "\n n Subfile is created" \
|
---|
| 2974 | "\n d Subfile is deleted" \
|
---|
| 2975 | "\n" \
|
---|
| 2976 | "\ninotifyd waits for PROG to exit." \
|
---|
| 2977 | "\nWhen x event happens for all FILEs, inotifyd exits." \
|
---|
| 2978 |
|
---|
| 2979 | /* -v, -b, -c are ignored */
|
---|
| 2980 | #define install_trivial_usage \
|
---|
| 2981 | "[-cdDsp] [-o USER] [-g GRP] [-m MODE] [SOURCE]... DEST"
|
---|
| 2982 | #define install_full_usage "\n\n" \
|
---|
| 2983 | "Copy files and set attributes\n" \
|
---|
| 2984 | "\nOptions:" \
|
---|
| 2985 | "\n -c Just copy (default)" \
|
---|
| 2986 | "\n -d Create directories" \
|
---|
| 2987 | "\n -D Create leading target directories" \
|
---|
| 2988 | "\n -s Strip symbol table" \
|
---|
| 2989 | "\n -p Preserve date" \
|
---|
| 2990 | "\n -o USER Set ownership" \
|
---|
| 2991 | "\n -g GRP Set group ownership" \
|
---|
| 2992 | "\n -m MODE Set permissions" \
|
---|
| 2993 | IF_SELINUX( \
|
---|
| 2994 | "\n -Z Set security context" \
|
---|
| 2995 | )
|
---|
| 2996 |
|
---|
| 2997 | /* would need to make the " | " optional depending on more than one selected: */
|
---|
| 2998 | #define ip_trivial_usage \
|
---|
| 2999 | "[OPTIONS] {" \
|
---|
| 3000 | IF_FEATURE_IP_ADDRESS("address | ") \
|
---|
| 3001 | IF_FEATURE_IP_ROUTE("route | ") \
|
---|
| 3002 | IF_FEATURE_IP_LINK("link | ") \
|
---|
| 3003 | IF_FEATURE_IP_TUNNEL("tunnel | ") \
|
---|
| 3004 | IF_FEATURE_IP_RULE("rule") \
|
---|
| 3005 | "} {COMMAND}"
|
---|
| 3006 | #define ip_full_usage "\n\n" \
|
---|
| 3007 | "ip [OPTIONS] OBJECT {COMMAND}\n" \
|
---|
| 3008 | "where OBJECT := {" \
|
---|
| 3009 | IF_FEATURE_IP_ADDRESS("address | ") \
|
---|
| 3010 | IF_FEATURE_IP_ROUTE("route | ") \
|
---|
| 3011 | IF_FEATURE_IP_LINK("link | ") \
|
---|
| 3012 | IF_FEATURE_IP_TUNNEL("tunnel | ") \
|
---|
| 3013 | IF_FEATURE_IP_RULE("rule") \
|
---|
| 3014 | "}\n" \
|
---|
| 3015 | "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }" \
|
---|
| 3016 |
|
---|
| 3017 | #define ipaddr_trivial_usage \
|
---|
| 3018 | "{ {add|del} IFADDR dev STRING | {show|flush}\n" \
|
---|
| 3019 | " [dev STRING] [to PREFIX] }"
|
---|
| 3020 | #define ipaddr_full_usage "\n\n" \
|
---|
| 3021 | "ipaddr {add|delete} IFADDR dev STRING\n" \
|
---|
| 3022 | "ipaddr {show|flush} [dev STRING] [scope SCOPE-ID]\n" \
|
---|
| 3023 | " [to PREFIX] [label PATTERN]\n" \
|
---|
| 3024 | " IFADDR := PREFIX | ADDR peer PREFIX\n" \
|
---|
| 3025 | " [broadcast ADDR] [anycast ADDR]\n" \
|
---|
| 3026 | " [label STRING] [scope SCOPE-ID]\n" \
|
---|
| 3027 | " SCOPE-ID := [host | link | global | NUMBER]" \
|
---|
| 3028 |
|
---|
| 3029 | #define ipcalc_trivial_usage \
|
---|
| 3030 | "[OPTIONS] ADDRESS[[/]NETMASK] [NETMASK]"
|
---|
| 3031 | #define ipcalc_full_usage "\n\n" \
|
---|
| 3032 | "Calculate IP network settings from a IP address\n" \
|
---|
| 3033 | "\nOptions:" \
|
---|
| 3034 | IF_FEATURE_IPCALC_LONG_OPTIONS( \
|
---|
| 3035 | "\n -b,--broadcast Display calculated broadcast address" \
|
---|
| 3036 | "\n -n,--network Display calculated network address" \
|
---|
| 3037 | "\n -m,--netmask Display default netmask for IP" \
|
---|
| 3038 | IF_FEATURE_IPCALC_FANCY( \
|
---|
| 3039 | "\n -p,--prefix Display the prefix for IP/NETMASK" \
|
---|
| 3040 | "\n -h,--hostname Display first resolved host name" \
|
---|
| 3041 | "\n -s,--silent Don't ever display error messages" \
|
---|
| 3042 | ) \
|
---|
| 3043 | ) \
|
---|
| 3044 | IF_NOT_FEATURE_IPCALC_LONG_OPTIONS( \
|
---|
| 3045 | "\n -b Display calculated broadcast address" \
|
---|
| 3046 | "\n -n Display calculated network address" \
|
---|
| 3047 | "\n -m Display default netmask for IP" \
|
---|
| 3048 | IF_FEATURE_IPCALC_FANCY( \
|
---|
| 3049 | "\n -p Display the prefix for IP/NETMASK" \
|
---|
| 3050 | "\n -h Display first resolved host name" \
|
---|
| 3051 | "\n -s Don't ever display error messages" \
|
---|
| 3052 | ) \
|
---|
| 3053 | )
|
---|
| 3054 |
|
---|
| 3055 | #define ipcrm_trivial_usage \
|
---|
| 3056 | "[-MQS key] [-mqs id]"
|
---|
| 3057 | #define ipcrm_full_usage "\n\n" \
|
---|
| 3058 | "Upper-case options MQS remove an object by shmkey value.\n" \
|
---|
| 3059 | "Lower-case options remove an object by shmid value.\n" \
|
---|
| 3060 | "\nOptions:" \
|
---|
| 3061 | "\n -mM Remove memory segment after last detach" \
|
---|
| 3062 | "\n -qQ Remove message queue" \
|
---|
| 3063 | "\n -sS Remove semaphore" \
|
---|
| 3064 |
|
---|
| 3065 | #define ipcs_trivial_usage \
|
---|
| 3066 | "[[-smq] -i shmid] | [[-asmq] [-tcplu]]"
|
---|
| 3067 | #define ipcs_full_usage "\n\n" \
|
---|
| 3068 | " -i Show specific resource" \
|
---|
| 3069 | "\nResource specification:" \
|
---|
| 3070 | "\n -m Shared memory segments" \
|
---|
| 3071 | "\n -q Message queues" \
|
---|
| 3072 | "\n -s Semaphore arrays" \
|
---|
| 3073 | "\n -a All (default)" \
|
---|
| 3074 | "\nOutput format:" \
|
---|
| 3075 | "\n -t Time" \
|
---|
| 3076 | "\n -c Creator" \
|
---|
| 3077 | "\n -p Pid" \
|
---|
| 3078 | "\n -l Limits" \
|
---|
| 3079 | "\n -u Summary" \
|
---|
| 3080 |
|
---|
| 3081 | #define iplink_trivial_usage \
|
---|
| 3082 | "{ set DEVICE { up | down | arp { on | off } | show [DEVICE] }"
|
---|
| 3083 | #define iplink_full_usage "\n\n" \
|
---|
| 3084 | "iplink set DEVICE { up | down | arp | multicast { on | off } |\n" \
|
---|
| 3085 | " dynamic { on | off } |\n" \
|
---|
| 3086 | " mtu MTU }\n" \
|
---|
| 3087 | "iplink show [DEVICE]" \
|
---|
| 3088 |
|
---|
| 3089 | #define iproute_trivial_usage \
|
---|
| 3090 | "{ list | flush | { add | del | change | append |\n" \
|
---|
| 3091 | " replace | monitor } ROUTE }"
|
---|
| 3092 | #define iproute_full_usage "\n\n" \
|
---|
| 3093 | "iproute { list | flush } SELECTOR\n" \
|
---|
| 3094 | "iproute get ADDRESS [from ADDRESS iif STRING]\n" \
|
---|
| 3095 | " [oif STRING] [tos TOS]\n" \
|
---|
| 3096 | "iproute { add | del | change | append | replace | monitor } ROUTE\n" \
|
---|
| 3097 | " SELECTOR := [root PREFIX] [match PREFIX] [proto RTPROTO]\n" \
|
---|
| 3098 | " ROUTE := [TYPE] PREFIX [tos TOS] [proto RTPROTO]\n" \
|
---|
| 3099 | " [metric METRIC]" \
|
---|
| 3100 |
|
---|
| 3101 | #define iprule_trivial_usage \
|
---|
| 3102 | "{[list | add | del] RULE}"
|
---|
| 3103 | #define iprule_full_usage "\n\n" \
|
---|
| 3104 | "iprule [list | add | del] SELECTOR ACTION\n" \
|
---|
| 3105 | " SELECTOR := [from PREFIX] [to PREFIX] [tos TOS] [fwmark FWMARK]\n" \
|
---|
| 3106 | " [dev STRING] [pref NUMBER]\n" \
|
---|
| 3107 | " ACTION := [table TABLE_ID] [nat ADDRESS]\n" \
|
---|
| 3108 | " [prohibit | reject | unreachable]\n" \
|
---|
| 3109 | " [realms [SRCREALM/]DSTREALM]\n" \
|
---|
| 3110 | " TABLE_ID := [local | main | default | NUMBER]" \
|
---|
| 3111 |
|
---|
| 3112 | #define iptunnel_trivial_usage \
|
---|
| 3113 | "{ add | change | del | show } [NAME]\n" \
|
---|
| 3114 | " [mode { ipip | gre | sit }]\n" \
|
---|
| 3115 | " [remote ADDR] [local ADDR] [ttl TTL]"
|
---|
| 3116 | #define iptunnel_full_usage "\n\n" \
|
---|
| 3117 | "iptunnel { add | change | del | show } [NAME]\n" \
|
---|
| 3118 | " [mode { ipip | gre | sit }] [remote ADDR] [local ADDR]\n" \
|
---|
| 3119 | " [[i|o]seq] [[i|o]key KEY] [[i|o]csum]\n" \
|
---|
| 3120 | " [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]" \
|
---|
| 3121 |
|
---|
| 3122 | #define kbd_mode_trivial_usage \
|
---|
| 3123 | "[-a|k|s|u] [-C TTY]"
|
---|
| 3124 | #define kbd_mode_full_usage "\n\n" \
|
---|
| 3125 | "Report or set the keyboard mode\n" \
|
---|
| 3126 | "\nOptions:" \
|
---|
| 3127 | "\n -a Default (ASCII)" \
|
---|
| 3128 | "\n -k Medium-raw (keyboard)" \
|
---|
| 3129 | "\n -s Raw (scancode)" \
|
---|
| 3130 | "\n -u Unicode (utf-8)" \
|
---|
| 3131 | "\n -C TTY Affect TTY instead of /dev/tty" \
|
---|
| 3132 |
|
---|
| 3133 | #define kill_trivial_usage \
|
---|
| 3134 | "[-l] [-SIG] PID..."
|
---|
| 3135 | #define kill_full_usage "\n\n" \
|
---|
| 3136 | "Send a signal (default: TERM) to given PIDs\n" \
|
---|
| 3137 | "\nOptions:" \
|
---|
| 3138 | "\n -l List all signal names and numbers" \
|
---|
| 3139 | /* "\n -s SIG Yet another way of specifying SIG" */ \
|
---|
| 3140 |
|
---|
| 3141 | #define kill_example_usage \
|
---|
| 3142 | "$ ps | grep apache\n" \
|
---|
| 3143 | "252 root root S [apache]\n" \
|
---|
| 3144 | "263 www-data www-data S [apache]\n" \
|
---|
| 3145 | "264 www-data www-data S [apache]\n" \
|
---|
| 3146 | "265 www-data www-data S [apache]\n" \
|
---|
| 3147 | "266 www-data www-data S [apache]\n" \
|
---|
| 3148 | "267 www-data www-data S [apache]\n" \
|
---|
| 3149 | "$ kill 252\n"
|
---|
| 3150 |
|
---|
| 3151 | #define killall_trivial_usage \
|
---|
| 3152 | "[-l] [-q] [-SIG] PROCESS_NAME..."
|
---|
| 3153 | #define killall_full_usage "\n\n" \
|
---|
| 3154 | "Send a signal (default: TERM) to given processes\n" \
|
---|
| 3155 | "\nOptions:" \
|
---|
| 3156 | "\n -l List all signal names and numbers" \
|
---|
| 3157 | /* "\n -s SIG Yet another way of specifying SIG" */ \
|
---|
| 3158 | "\n -q Don't complain if no processes were killed" \
|
---|
| 3159 |
|
---|
| 3160 | #define killall_example_usage \
|
---|
| 3161 | "$ killall apache\n"
|
---|
| 3162 |
|
---|
| 3163 | #define killall5_trivial_usage \
|
---|
| 3164 | "[-l] [-SIG] [-o PID]..."
|
---|
| 3165 | #define killall5_full_usage "\n\n" \
|
---|
| 3166 | "Send a signal (default: TERM) to all processes outside current session\n" \
|
---|
| 3167 | "\nOptions:" \
|
---|
| 3168 | "\n -l List all signal names and numbers" \
|
---|
| 3169 | "\n -o PID Don't signal this PID" \
|
---|
| 3170 | /* "\n -s SIG Yet another way of specifying SIG" */ \
|
---|
| 3171 |
|
---|
| 3172 | #define klogd_trivial_usage \
|
---|
| 3173 | "[-c N] [-n]"
|
---|
| 3174 | #define klogd_full_usage "\n\n" \
|
---|
| 3175 | "Kernel logger\n" \
|
---|
| 3176 | "\nOptions:" \
|
---|
| 3177 | "\n -c N Only messages with level < N are printed to console" \
|
---|
| 3178 | "\n -n Run in foreground" \
|
---|
| 3179 |
|
---|
| 3180 | #define length_trivial_usage \
|
---|
| 3181 | "STRING"
|
---|
| 3182 | #define length_full_usage "\n\n" \
|
---|
| 3183 | "Print STRING's length"
|
---|
| 3184 |
|
---|
| 3185 | #define length_example_usage \
|
---|
| 3186 | "$ length Hello\n" \
|
---|
| 3187 | "5\n"
|
---|
| 3188 |
|
---|
| 3189 | #define less_trivial_usage \
|
---|
| 3190 | "[-EMNmh~I?] [FILE]..."
|
---|
| 3191 | #define less_full_usage "\n\n" \
|
---|
| 3192 | "View FILE (or stdin) one screenful at a time\n" \
|
---|
| 3193 | "\nOptions:" \
|
---|
| 3194 | "\n -E Quit once the end of a file is reached" \
|
---|
| 3195 | "\n -M,-m Display status line with line numbers" \
|
---|
| 3196 | "\n and percentage through the file" \
|
---|
| 3197 | "\n -N Prefix line number to each line" \
|
---|
| 3198 | "\n -I Ignore case in all searches" \
|
---|
| 3199 | "\n -~ Suppress ~s displayed past the end of the file" \
|
---|
| 3200 |
|
---|
| 3201 | #define linux32_trivial_usage NOUSAGE_STR
|
---|
| 3202 | #define linux32_full_usage ""
|
---|
| 3203 | #define linux64_trivial_usage NOUSAGE_STR
|
---|
| 3204 | #define linux64_full_usage ""
|
---|
| 3205 |
|
---|
| 3206 | #define setarch_trivial_usage \
|
---|
| 3207 | "personality PROG ARGS"
|
---|
| 3208 | #define setarch_full_usage "\n\n" \
|
---|
| 3209 | "Personality may be:\n" \
|
---|
| 3210 | " linux32 Set 32bit uname emulation\n" \
|
---|
| 3211 | " linux64 Set 64bit uname emulation" \
|
---|
| 3212 |
|
---|
| 3213 | #define ln_trivial_usage \
|
---|
| 3214 | "[OPTIONS] TARGET... LINK|DIR"
|
---|
| 3215 | #define ln_full_usage "\n\n" \
|
---|
| 3216 | "Create a link LINK or DIR/TARGET to the specified TARGET(s)\n" \
|
---|
| 3217 | "\nOptions:" \
|
---|
| 3218 | "\n -s Make symlinks instead of hardlinks" \
|
---|
| 3219 | "\n -f Remove existing destinations" \
|
---|
| 3220 | "\n -n Don't dereference symlinks - treat like normal file" \
|
---|
| 3221 | "\n -b Make a backup of the target (if exists) before link operation" \
|
---|
| 3222 | "\n -S suf Use suffix instead of ~ when making backup files" \
|
---|
| 3223 |
|
---|
| 3224 | #define ln_example_usage \
|
---|
| 3225 | "$ ln -s BusyBox /tmp/ls\n" \
|
---|
| 3226 | "$ ls -l /tmp/ls\n" \
|
---|
| 3227 | "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n"
|
---|
| 3228 |
|
---|
| 3229 | #define load_policy_trivial_usage NOUSAGE_STR
|
---|
| 3230 | #define load_policy_full_usage ""
|
---|
| 3231 |
|
---|
| 3232 | #define loadfont_trivial_usage \
|
---|
| 3233 | "< font"
|
---|
| 3234 | #define loadfont_full_usage "\n\n" \
|
---|
| 3235 | "Load a console font from stdin" \
|
---|
| 3236 | /* "\n -C TTY Affect TTY instead of /dev/tty" */ \
|
---|
| 3237 |
|
---|
| 3238 | #define loadfont_example_usage \
|
---|
| 3239 | "$ loadfont < /etc/i18n/fontname\n"
|
---|
| 3240 |
|
---|
| 3241 | #define loadkmap_trivial_usage \
|
---|
| 3242 | "< keymap"
|
---|
| 3243 | #define loadkmap_full_usage "\n\n" \
|
---|
| 3244 | "Load a binary keyboard translation table from stdin\n" \
|
---|
| 3245 | /* "\n -C TTY Affect TTY instead of /dev/tty" */ \
|
---|
| 3246 |
|
---|
| 3247 | #define loadkmap_example_usage \
|
---|
| 3248 | "$ loadkmap < /etc/i18n/lang-keymap\n"
|
---|
| 3249 |
|
---|
| 3250 | #define logger_trivial_usage \
|
---|
| 3251 | "[OPTIONS] [MESSAGE]"
|
---|
| 3252 | #define logger_full_usage "\n\n" \
|
---|
| 3253 | "Write MESSAGE (or stdin) to syslog\n" \
|
---|
| 3254 | "\nOptions:" \
|
---|
| 3255 | "\n -s Log to stderr as well as the system log" \
|
---|
| 3256 | "\n -t TAG Log using the specified tag (defaults to user name)" \
|
---|
| 3257 | "\n -p PRIO Priority (numeric or facility.level pair)" \
|
---|
| 3258 |
|
---|
| 3259 | #define logger_example_usage \
|
---|
| 3260 | "$ logger \"hello\"\n"
|
---|
| 3261 |
|
---|
| 3262 | #define login_trivial_usage \
|
---|
| 3263 | "[-p] [-h HOST] [[-f] USER]"
|
---|
| 3264 | #define login_full_usage "\n\n" \
|
---|
| 3265 | "Begin a new session on the system\n" \
|
---|
| 3266 | "\nOptions:" \
|
---|
| 3267 | "\n -f Don't authenticate (user already authenticated)" \
|
---|
| 3268 | "\n -h Name of the remote host" \
|
---|
| 3269 | "\n -p Preserve environment" \
|
---|
| 3270 |
|
---|
| 3271 | #define logname_trivial_usage \
|
---|
| 3272 | ""
|
---|
| 3273 | #define logname_full_usage "\n\n" \
|
---|
| 3274 | "Print the name of the current user"
|
---|
| 3275 | #define logname_example_usage \
|
---|
| 3276 | "$ logname\n" \
|
---|
| 3277 | "root\n"
|
---|
| 3278 |
|
---|
| 3279 | #define logread_trivial_usage \
|
---|
| 3280 | "[-f]"
|
---|
| 3281 | #define logread_full_usage "\n\n" \
|
---|
| 3282 | "Show messages in syslogd's circular buffer\n" \
|
---|
| 3283 | "\nOptions:" \
|
---|
| 3284 | "\n -f Output data as log grows" \
|
---|
| 3285 |
|
---|
| 3286 | #define losetup_trivial_usage \
|
---|
| 3287 | "[-o OFS] LOOPDEV FILE - associate loop devices\n" \
|
---|
| 3288 | " losetup -d LOOPDEV - disassociate\n" \
|
---|
| 3289 | " losetup [-f] - show"
|
---|
| 3290 | #define losetup_full_usage "\n\n" \
|
---|
| 3291 | "Options:" \
|
---|
| 3292 | "\n -o OFS Start OFS bytes into FILE" \
|
---|
| 3293 | "\n -f Show first free loop device" \
|
---|
| 3294 |
|
---|
| 3295 | #define losetup_notes_usage \
|
---|
| 3296 | "No arguments will display all current associations.\n" \
|
---|
| 3297 | "One argument (losetup /dev/loop1) will display the current association\n" \
|
---|
| 3298 | "(if any), or disassociate it (with -d). The display shows the offset\n" \
|
---|
| 3299 | "and filename of the file the loop device is currently bound to.\n\n" \
|
---|
| 3300 | "Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \
|
---|
| 3301 | "with an optional offset (-o 12345). Encryption is not yet supported.\n" \
|
---|
| 3302 | "losetup -f will show the first loop free loop device\n\n"
|
---|
| 3303 |
|
---|
| 3304 | #define lpd_trivial_usage \
|
---|
| 3305 | "SPOOLDIR [HELPER [ARGS]]"
|
---|
| 3306 | #define lpd_full_usage "\n\n" \
|
---|
| 3307 | "SPOOLDIR must contain (symlinks to) device nodes or directories" \
|
---|
| 3308 | "\nwith names matching print queue names. In the first case, jobs are" \
|
---|
| 3309 | "\nsent directly to the device. Otherwise each job is stored in queue" \
|
---|
| 3310 | "\ndirectory and HELPER program is called. Name of file to print" \
|
---|
| 3311 | "\nis passed in $DATAFILE variable." \
|
---|
| 3312 | "\nExample:" \
|
---|
| 3313 | "\n tcpsvd -E 0 515 softlimit -m 999999 lpd /var/spool ./print" \
|
---|
| 3314 |
|
---|
| 3315 | #define lpq_trivial_usage \
|
---|
| 3316 | "[-P queue[@host[:port]]] [-U USERNAME] [-d JOBID]... [-fs]"
|
---|
| 3317 | #define lpq_full_usage "\n\n" \
|
---|
| 3318 | "Options:" \
|
---|
| 3319 | "\n -P lp service to connect to (else uses $PRINTER)" \
|
---|
| 3320 | "\n -d Delete jobs" \
|
---|
| 3321 | "\n -f Force any waiting job to be printed" \
|
---|
| 3322 | "\n -s Short display" \
|
---|
| 3323 |
|
---|
| 3324 | #define lpr_trivial_usage \
|
---|
| 3325 | "-P queue[@host[:port]] -U USERNAME -J TITLE -Vmh [FILE]..."
|
---|
| 3326 | /* -C CLASS exists too, not shown.
|
---|
| 3327 | * CLASS is supposed to be printed on banner page, if one is requested */
|
---|
| 3328 | #define lpr_full_usage "\n\n" \
|
---|
| 3329 | "Options:" \
|
---|
| 3330 | "\n -P lp service to connect to (else uses $PRINTER)"\
|
---|
| 3331 | "\n -m Send mail on completion" \
|
---|
| 3332 | "\n -h Print banner page too" \
|
---|
| 3333 | "\n -V Verbose" \
|
---|
| 3334 |
|
---|
| 3335 | #define ls_trivial_usage \
|
---|
| 3336 | "[-1Aa" IF_FEATURE_LS_TIMESTAMPS("c") "Cd" \
|
---|
| 3337 | IF_FEATURE_LS_TIMESTAMPS("e") IF_FEATURE_LS_FILETYPES("F") "iln" \
|
---|
| 3338 | IF_FEATURE_LS_FILETYPES("p") IF_FEATURE_LS_FOLLOWLINKS("L") \
|
---|
| 3339 | IF_FEATURE_LS_RECURSIVE("R") IF_FEATURE_LS_SORTFILES("rS") "s" \
|
---|
| 3340 | IF_FEATURE_AUTOWIDTH("T") IF_FEATURE_LS_TIMESTAMPS("tu") \
|
---|
| 3341 | IF_FEATURE_LS_SORTFILES("v") IF_FEATURE_AUTOWIDTH("w") "x" \
|
---|
| 3342 | IF_FEATURE_LS_SORTFILES("X") IF_FEATURE_HUMAN_READABLE("h") "k" \
|
---|
| 3343 | IF_SELINUX("K") "] [FILE]..."
|
---|
| 3344 | #define ls_full_usage "\n\n" \
|
---|
| 3345 | "List directory contents\n" \
|
---|
| 3346 | "\nOptions:" \
|
---|
| 3347 | "\n -1 List in a single column" \
|
---|
| 3348 | "\n -A Don't list . and .." \
|
---|
| 3349 | "\n -a Don't hide entries starting with ." \
|
---|
| 3350 | "\n -C List by columns" \
|
---|
| 3351 | IF_FEATURE_LS_TIMESTAMPS( \
|
---|
| 3352 | "\n -c With -l: sort by ctime") \
|
---|
| 3353 | IF_FEATURE_LS_COLOR( \
|
---|
| 3354 | "\n --color[={always,never,auto}] Control coloring") \
|
---|
| 3355 | "\n -d List directory entries instead of contents" \
|
---|
| 3356 | IF_FEATURE_LS_TIMESTAMPS( \
|
---|
| 3357 | "\n -e List full date and time") \
|
---|
| 3358 | IF_FEATURE_LS_FILETYPES( \
|
---|
| 3359 | "\n -F Append indicator (one of */=@|) to entries") \
|
---|
| 3360 | "\n -i List inode numbers" \
|
---|
| 3361 | "\n -l Long listing format" \
|
---|
| 3362 | "\n -n List numeric UIDs and GIDs instead of names" \
|
---|
| 3363 | IF_FEATURE_LS_FILETYPES( \
|
---|
| 3364 | "\n -p Append indicator (one of /=@|) to entries") \
|
---|
| 3365 | IF_FEATURE_LS_FOLLOWLINKS( \
|
---|
| 3366 | "\n -L List entries pointed to by symlinks") \
|
---|
| 3367 | IF_FEATURE_LS_RECURSIVE( \
|
---|
| 3368 | "\n -R Recurse") \
|
---|
| 3369 | IF_FEATURE_LS_SORTFILES( \
|
---|
| 3370 | "\n -r Sort in reverse order") \
|
---|
| 3371 | IF_FEATURE_LS_SORTFILES( \
|
---|
| 3372 | "\n -S Sort by file size") \
|
---|
| 3373 | "\n -s List the size of each file, in blocks" \
|
---|
| 3374 | IF_FEATURE_AUTOWIDTH( \
|
---|
| 3375 | "\n -T N Assume tabstop every N columns") \
|
---|
| 3376 | IF_FEATURE_LS_TIMESTAMPS( \
|
---|
| 3377 | "\n -t With -l: sort by modification time") \
|
---|
| 3378 | IF_FEATURE_LS_TIMESTAMPS( \
|
---|
| 3379 | "\n -u With -l: sort by access time") \
|
---|
| 3380 | IF_FEATURE_LS_SORTFILES( \
|
---|
| 3381 | "\n -v Sort by version") \
|
---|
| 3382 | IF_FEATURE_AUTOWIDTH( \
|
---|
| 3383 | "\n -w N Assume the terminal is N columns wide") \
|
---|
| 3384 | "\n -x List by lines" \
|
---|
| 3385 | IF_FEATURE_LS_SORTFILES( \
|
---|
| 3386 | "\n -X Sort by extension") \
|
---|
| 3387 | IF_FEATURE_HUMAN_READABLE( \
|
---|
| 3388 | "\n -h List sizes in human readable format (1K 243M 2G)") \
|
---|
| 3389 | IF_SELINUX( \
|
---|
| 3390 | "\n -k List security context") \
|
---|
| 3391 | IF_SELINUX( \
|
---|
| 3392 | "\n -K List security context in long format") \
|
---|
| 3393 | IF_SELINUX( \
|
---|
| 3394 | "\n -Z List security context and permission") \
|
---|
| 3395 |
|
---|
| 3396 | #define lsattr_trivial_usage \
|
---|
| 3397 | "[-Radlv] [FILE]..."
|
---|
| 3398 | #define lsattr_full_usage "\n\n" \
|
---|
| 3399 | "List file attributes on an ext2 fs\n" \
|
---|
| 3400 | "\nOptions:" \
|
---|
| 3401 | "\n -R Recurse" \
|
---|
| 3402 | "\n -a Don't hide entries starting with ." \
|
---|
| 3403 | "\n -d List directory entries instead of contents" \
|
---|
| 3404 | "\n -l List long flag names" \
|
---|
| 3405 | "\n -v List the file's version/generation number" \
|
---|
| 3406 |
|
---|
| 3407 | #define lspci_trivial_usage \
|
---|
| 3408 | "[-mk]"
|
---|
| 3409 | #define lspci_full_usage "\n\n" \
|
---|
| 3410 | "List all PCI devices" \
|
---|
| 3411 | "\n" \
|
---|
| 3412 | "\n -m Parseable output" \
|
---|
| 3413 | "\n -k Show driver" \
|
---|
| 3414 |
|
---|
| 3415 | #define lsusb_trivial_usage NOUSAGE_STR
|
---|
| 3416 | #define lsusb_full_usage ""
|
---|
| 3417 |
|
---|
| 3418 | #if ENABLE_FEATURE_MAKEDEVS_LEAF
|
---|
| 3419 | #define makedevs_trivial_usage \
|
---|
| 3420 | "NAME TYPE MAJOR MINOR FIRST LAST [s]"
|
---|
| 3421 | #define makedevs_full_usage "\n\n" \
|
---|
| 3422 | "Create a range of block or character special files" \
|
---|
| 3423 | "\n" \
|
---|
| 3424 | "\nTYPE is:" \
|
---|
| 3425 | "\n b Block device" \
|
---|
| 3426 | "\n c Character device" \
|
---|
| 3427 | "\n f FIFO, MAJOR and MINOR are ignored" \
|
---|
| 3428 | "\n" \
|
---|
| 3429 | "\nFIRST..LAST specify numbers appended to NAME." \
|
---|
| 3430 | "\nIf 's' is the last argument, the base device is created as well." \
|
---|
| 3431 | "\n" \
|
---|
| 3432 | "\nExamples:" \
|
---|
| 3433 | "\n makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63" \
|
---|
| 3434 | "\n makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8"
|
---|
| 3435 | #define makedevs_example_usage \
|
---|
| 3436 | "# makedevs /dev/ttyS c 4 66 2 63\n" \
|
---|
| 3437 | "[creates ttyS2-ttyS63]\n" \
|
---|
| 3438 | "# makedevs /dev/hda b 3 0 0 8 s\n" \
|
---|
| 3439 | "[creates hda,hda1-hda8]\n"
|
---|
| 3440 | #endif
|
---|
| 3441 |
|
---|
| 3442 | #if ENABLE_FEATURE_MAKEDEVS_TABLE
|
---|
| 3443 | #define makedevs_trivial_usage \
|
---|
| 3444 | "[-d device_table] rootdir"
|
---|
| 3445 | #define makedevs_full_usage "\n\n" \
|
---|
| 3446 | "Create a range of special files as specified in a device table.\n" \
|
---|
| 3447 | "Device table entries take the form of:\n" \
|
---|
| 3448 | "<type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>\n" \
|
---|
| 3449 | "Where name is the file name, type can be one of:\n" \
|
---|
| 3450 | " f Regular file\n" \
|
---|
| 3451 | " d Directory\n" \
|
---|
| 3452 | " c Character device\n" \
|
---|
| 3453 | " b Block device\n" \
|
---|
| 3454 | " p Fifo (named pipe)\n" \
|
---|
| 3455 | "uid is the user id for the target file, gid is the group id for the\n" \
|
---|
| 3456 | "target file. The rest of the entries (major, minor, etc) apply to\n" \
|
---|
| 3457 | "to device special files. A '-' may be used for blank entries."
|
---|
| 3458 | #define makedevs_example_usage \
|
---|
| 3459 | "For example:\n" \
|
---|
| 3460 | "<name> <type> <mode><uid><gid><major><minor><start><inc><count>\n" \
|
---|
| 3461 | "/dev d 755 0 0 - - - - -\n" \
|
---|
| 3462 | "/dev/console c 666 0 0 5 1 - - -\n" \
|
---|
| 3463 | "/dev/null c 666 0 0 1 3 0 0 -\n" \
|
---|
| 3464 | "/dev/zero c 666 0 0 1 5 0 0 -\n" \
|
---|
| 3465 | "/dev/hda b 640 0 0 3 0 0 0 -\n" \
|
---|
| 3466 | "/dev/hda b 640 0 0 3 1 1 1 15\n\n" \
|
---|
| 3467 | "Will Produce:\n" \
|
---|
| 3468 | "/dev\n" \
|
---|
| 3469 | "/dev/console\n" \
|
---|
| 3470 | "/dev/null\n" \
|
---|
| 3471 | "/dev/zero\n" \
|
---|
| 3472 | "/dev/hda\n" \
|
---|
| 3473 | "/dev/hda[0-15]\n"
|
---|
| 3474 | #endif
|
---|
| 3475 |
|
---|
| 3476 | #define makemime_trivial_usage \
|
---|
| 3477 | "[OPTIONS] [FILE]..."
|
---|
| 3478 | #define makemime_full_usage "\n\n" \
|
---|
| 3479 | "Create multipart MIME-encoded message from FILEs\n" \
|
---|
| 3480 | /* "Transfer encoding is base64, disposition is inline (not attachment)\n" */ \
|
---|
| 3481 | "\nOptions:" \
|
---|
| 3482 | "\n -o FILE Output. Default: stdout" \
|
---|
| 3483 | "\n -a HDR Add header. Examples:" \
|
---|
| 3484 | "\n \"From: user@host.org\", \"Date: `date -R`\"" \
|
---|
| 3485 | "\n -c CT Content type. Default: text/plain" \
|
---|
| 3486 | "\n -C CS Charset. Default: " CONFIG_FEATURE_MIME_CHARSET \
|
---|
| 3487 | /* "\n -e ENC Transfer encoding. Ignored. base64 is assumed" */ \
|
---|
| 3488 | "\n" \
|
---|
| 3489 | "\nOther options are silently ignored" \
|
---|
| 3490 |
|
---|
| 3491 | #define man_trivial_usage \
|
---|
| 3492 | "[-aw] [MANPAGE]..."
|
---|
| 3493 | #define man_full_usage "\n\n" \
|
---|
| 3494 | "Format and display manual page\n" \
|
---|
| 3495 | "\nOptions:" \
|
---|
| 3496 | "\n -a Display all pages" \
|
---|
| 3497 | "\n -w Show page locations" \
|
---|
| 3498 |
|
---|
| 3499 | #define matchpathcon_trivial_usage \
|
---|
| 3500 | "[-n] [-N] [-f file_contexts_file] [-p prefix] [-V]"
|
---|
| 3501 | #define matchpathcon_full_usage "\n\n" \
|
---|
| 3502 | " -n Don't display path" \
|
---|
| 3503 | "\n -N Don't use translations" \
|
---|
| 3504 | "\n -f Use alternate file_context file" \
|
---|
| 3505 | "\n -p Use prefix to speed translations" \
|
---|
| 3506 | "\n -V Verify file context on disk matches defaults" \
|
---|
| 3507 |
|
---|
| 3508 | #define md5sum_trivial_usage \
|
---|
| 3509 | "[FILE]..." \
|
---|
| 3510 | IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum -c [-sw] [FILE]")
|
---|
| 3511 | #define md5sum_full_usage "\n\n" \
|
---|
| 3512 | "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \
|
---|
| 3513 | IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
|
---|
| 3514 | "\nOptions:" \
|
---|
| 3515 | "\n -c Check sums against given list" \
|
---|
| 3516 | "\n -s Don't output anything, status code shows success" \
|
---|
| 3517 | "\n -w Warn about improperly formatted checksum lines" \
|
---|
| 3518 | )
|
---|
| 3519 |
|
---|
| 3520 | #define md5sum_example_usage \
|
---|
| 3521 | "$ md5sum < busybox\n" \
|
---|
| 3522 | "6fd11e98b98a58f64ff3398d7b324003\n" \
|
---|
| 3523 | "$ md5sum busybox\n" \
|
---|
| 3524 | "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
|
---|
| 3525 | "$ md5sum -c -\n" \
|
---|
| 3526 | "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
|
---|
| 3527 | "busybox: OK\n" \
|
---|
| 3528 | "^D\n"
|
---|
| 3529 |
|
---|
| 3530 | #define sha1sum_trivial_usage \
|
---|
| 3531 | "[FILE]..." \
|
---|
| 3532 | IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum -c [-sw] [FILE]")
|
---|
| 3533 | #define sha1sum_full_usage "\n\n" \
|
---|
| 3534 | "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums" \
|
---|
| 3535 | IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
|
---|
| 3536 | "\nOptions:" \
|
---|
| 3537 | "\n -c Check sums against given list" \
|
---|
| 3538 | "\n -s Don't output anything, status code shows success" \
|
---|
| 3539 | "\n -w Warn about improperly formatted checksum lines" \
|
---|
| 3540 | )
|
---|
| 3541 |
|
---|
| 3542 | #define sha256sum_trivial_usage \
|
---|
| 3543 | "[FILE]..." \
|
---|
| 3544 | IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha256sum -c [-sw] [FILE]")
|
---|
| 3545 | #define sha256sum_full_usage "\n\n" \
|
---|
| 3546 | "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA256 checksums" \
|
---|
| 3547 | IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
|
---|
| 3548 | "\nOptions:" \
|
---|
| 3549 | "\n -c Check sums against given list" \
|
---|
| 3550 | "\n -s Don't output anything, status code shows success" \
|
---|
| 3551 | "\n -w Warn about improperly formatted checksum lines" \
|
---|
| 3552 | )
|
---|
| 3553 |
|
---|
| 3554 | #define sha512sum_trivial_usage \
|
---|
| 3555 | "[FILE]..." \
|
---|
| 3556 | IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha512sum -c [-sw] [FILE]")
|
---|
| 3557 | #define sha512sum_full_usage "\n\n" \
|
---|
| 3558 | "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA512 checksums" \
|
---|
| 3559 | IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
|
---|
| 3560 | "\nOptions:" \
|
---|
| 3561 | "\n -c Check sums against given list" \
|
---|
| 3562 | "\n -s Don't output anything, status code shows success" \
|
---|
| 3563 | "\n -w Warn about improperly formatted checksum lines" \
|
---|
| 3564 | )
|
---|
| 3565 |
|
---|
| 3566 | #define mdev_trivial_usage \
|
---|
| 3567 | "[-s]"
|
---|
| 3568 | #define mdev_full_usage "\n\n" \
|
---|
| 3569 | " -s Scan /sys and populate /dev during system boot\n" \
|
---|
| 3570 | "\n" \
|
---|
| 3571 | "It can be run by kernel as a hotplug helper. To activate it:\n" \
|
---|
| 3572 | " echo /sbin/mdev > /proc/sys/kernel/hotplug\n" \
|
---|
| 3573 | IF_FEATURE_MDEV_CONF( \
|
---|
| 3574 | "It uses /etc/mdev.conf with lines\n" \
|
---|
| 3575 | "[-]DEVNAME UID:GID PERM" \
|
---|
| 3576 | IF_FEATURE_MDEV_RENAME(" [>|=PATH]") \
|
---|
| 3577 | IF_FEATURE_MDEV_EXEC(" [@|$|*PROG]") \
|
---|
| 3578 | ) \
|
---|
| 3579 |
|
---|
| 3580 | #define mdev_notes_usage "" \
|
---|
| 3581 | IF_FEATURE_MDEV_CONFIG( \
|
---|
| 3582 | "The mdev config file contains lines that look like:\n" \
|
---|
| 3583 | " hd[a-z][0-9]* 0:3 660\n\n" \
|
---|
| 3584 | "That's device name (with regex match), uid:gid, and permissions.\n\n" \
|
---|
| 3585 | IF_FEATURE_MDEV_EXEC( \
|
---|
| 3586 | "Optionally, that can be followed (on the same line) by a special character\n" \
|
---|
| 3587 | "and a command line to run after creating/before deleting the corresponding\n" \
|
---|
| 3588 | "device(s). The environment variable $MDEV indicates the active device node\n" \
|
---|
| 3589 | "(which is useful if it's a regex match). For example:\n\n" \
|
---|
| 3590 | " hdc root:cdrom 660 *ln -s $MDEV cdrom\n\n" \
|
---|
| 3591 | "The special characters are @ (run after creating), $ (run before deleting),\n" \
|
---|
| 3592 | "and * (run both after creating and before deleting). The commands run in\n" \
|
---|
| 3593 | "the /dev directory, and use system() which calls /bin/sh.\n\n" \
|
---|
| 3594 | ) \
|
---|
| 3595 | "Config file parsing stops on the first matching line. If no config\n" \
|
---|
| 3596 | "entry is matched, devices are created with default 0:0 660. (Make\n" \
|
---|
| 3597 | "the last line match .* to override this.)\n\n" \
|
---|
| 3598 | )
|
---|
| 3599 |
|
---|
| 3600 | #define microcom_trivial_usage \
|
---|
| 3601 | "[-d DELAY] [-t TIMEOUT] [-s SPEED] [-X] TTY"
|
---|
| 3602 | #define microcom_full_usage "\n\n" \
|
---|
| 3603 | "Copy bytes for stdin to TTY and from TTY to stdout\n" \
|
---|
| 3604 | "\nOptions:" \
|
---|
| 3605 | "\n -d Wait up to DELAY ms for TTY output before sending every" \
|
---|
| 3606 | "\n next byte to it" \
|
---|
| 3607 | "\n -t Exit if both stdin and TTY are silent for TIMEOUT ms" \
|
---|
| 3608 | "\n -s Set serial line to SPEED" \
|
---|
| 3609 | "\n -X Disable special meaning of NUL and Ctrl-X from stdin" \
|
---|
| 3610 |
|
---|
| 3611 | #define mkdir_trivial_usage \
|
---|
| 3612 | "[OPTIONS] DIRECTORY..."
|
---|
| 3613 | #define mkdir_full_usage "\n\n" \
|
---|
| 3614 | "Create DIRECTORY\n" \
|
---|
| 3615 | "\nOptions:" \
|
---|
| 3616 | "\n -m MODE Mode" \
|
---|
| 3617 | "\n -p No error if exists; make parent directories as needed" \
|
---|
| 3618 | IF_SELINUX( \
|
---|
| 3619 | "\n -Z Set security context" \
|
---|
| 3620 | )
|
---|
| 3621 |
|
---|
| 3622 | #define mkdir_example_usage \
|
---|
| 3623 | "$ mkdir /tmp/foo\n" \
|
---|
| 3624 | "$ mkdir /tmp/foo\n" \
|
---|
| 3625 | "/tmp/foo: File exists\n" \
|
---|
| 3626 | "$ mkdir /tmp/foo/bar/baz\n" \
|
---|
| 3627 | "/tmp/foo/bar/baz: No such file or directory\n" \
|
---|
| 3628 | "$ mkdir -p /tmp/foo/bar/baz\n"
|
---|
| 3629 |
|
---|
| 3630 | #define mkfifo_trivial_usage \
|
---|
| 3631 | "[-m MODE] " IF_SELINUX("[-Z] ") "NAME"
|
---|
| 3632 | #define mkfifo_full_usage "\n\n" \
|
---|
| 3633 | "Create named pipe\n" \
|
---|
| 3634 | "\nOptions:" \
|
---|
| 3635 | "\n -m MODE Mode (default a=rw)" \
|
---|
| 3636 | IF_SELINUX( \
|
---|
| 3637 | "\n -Z Set security context" \
|
---|
| 3638 | )
|
---|
| 3639 |
|
---|
| 3640 | #define mkfs_ext2_trivial_usage \
|
---|
| 3641 | "[-Fn] " \
|
---|
| 3642 | /* "[-c|-l filename] " */ \
|
---|
| 3643 | "[-b BLK_SIZE] " \
|
---|
| 3644 | /* "[-f fragment-size] [-g blocks-per-group] " */ \
|
---|
| 3645 | "[-i INODE_RATIO] [-I INODE_SIZE] " \
|
---|
| 3646 | /* "[-j] [-J journal-options] [-N number-of-inodes] " */ \
|
---|
| 3647 | "[-m RESERVED_PERCENT] " \
|
---|
| 3648 | /* "[-o creator-os] [-O feature[,...]] [-q] " */ \
|
---|
| 3649 | /* "[r fs-revision-level] [-E extended-options] [-v] [-F] " */ \
|
---|
| 3650 | "[-L LABEL] " \
|
---|
| 3651 | /* "[-M last-mounted-directory] [-S] [-T filesystem-type] " */ \
|
---|
| 3652 | "BLOCKDEV [KBYTES]"
|
---|
| 3653 | #define mkfs_ext2_full_usage "\n\n" \
|
---|
| 3654 | " -b BLK_SIZE Block size, bytes" \
|
---|
| 3655 | /* "\n -c Check device for bad blocks" */ \
|
---|
| 3656 | /* "\n -E opts Set extended options" */ \
|
---|
| 3657 | /* "\n -f size Fragment size in bytes" */ \
|
---|
| 3658 | "\n -F Force" \
|
---|
| 3659 | /* "\n -g N Number of blocks in a block group" */ \
|
---|
| 3660 | "\n -i RATIO Max number of files is filesystem_size / RATIO" \
|
---|
| 3661 | "\n -I BYTES Inode size (min 128)" \
|
---|
| 3662 | /* "\n -j Create a journal (ext3)" */ \
|
---|
| 3663 | /* "\n -J opts Set journal options (size/device)" */ \
|
---|
| 3664 | /* "\n -l file Read bad blocks list from file" */ \
|
---|
| 3665 | "\n -L LBL Volume label" \
|
---|
| 3666 | "\n -m PERCENT Percent of blocks to reserve for admin" \
|
---|
| 3667 | /* "\n -M dir Set last mounted directory" */ \
|
---|
| 3668 | "\n -n Dry run" \
|
---|
| 3669 | /* "\n -N N Number of inodes to create" */ \
|
---|
| 3670 | /* "\n -o os Set the 'creator os' field" */ \
|
---|
| 3671 | /* "\n -O features Dir_index/filetype/has_journal/journal_dev/sparse_super" */ \
|
---|
| 3672 | /* "\n -q Quiet" */ \
|
---|
| 3673 | /* "\n -r rev Set filesystem revision" */ \
|
---|
| 3674 | /* "\n -S Write superblock and group descriptors only" */ \
|
---|
| 3675 | /* "\n -T fs-type Set usage type (news/largefile/largefile4)" */ \
|
---|
| 3676 | /* "\n -v Verbose" */ \
|
---|
| 3677 |
|
---|
| 3678 | #define mkfs_minix_trivial_usage \
|
---|
| 3679 | "[-c | -l FILE] [-nXX] [-iXX] BLOCKDEV [KBYTES]"
|
---|
| 3680 | #define mkfs_minix_full_usage "\n\n" \
|
---|
| 3681 | "Make a MINIX filesystem\n" \
|
---|
| 3682 | "\nOptions:" \
|
---|
| 3683 | "\n -c Check device for bad blocks" \
|
---|
| 3684 | "\n -n [14|30] Maximum length of filenames" \
|
---|
| 3685 | "\n -i INODES Number of inodes for the filesystem" \
|
---|
| 3686 | "\n -l FILE Read bad blocks list from FILE" \
|
---|
| 3687 | "\n -v Make version 2 filesystem" \
|
---|
| 3688 |
|
---|
| 3689 | #define mkfs_reiser_trivial_usage \
|
---|
| 3690 | "[-f] [-l LABEL] BLOCKDEV [4K-BLOCKS]"
|
---|
| 3691 |
|
---|
| 3692 | #define mkfs_reiser_full_usage "\n\n" \
|
---|
| 3693 | "Make a ReiserFS V3 filesystem\n" \
|
---|
| 3694 | "\nOptions:" \
|
---|
| 3695 | "\n -f Force" \
|
---|
| 3696 | "\n -l LBL Volume label" \
|
---|
| 3697 |
|
---|
| 3698 | #define mkfs_vfat_trivial_usage \
|
---|
| 3699 | "[-v] [-n LABEL] BLOCKDEV [KBYTES]"
|
---|
| 3700 | /* Accepted but ignored:
|
---|
| 3701 | "[-c] [-C] [-I] [-l bad-block-file] [-b backup-boot-sector] "
|
---|
| 3702 | "[-m boot-msg-file] [-i volume-id] "
|
---|
| 3703 | "[-s sectors-per-cluster] [-S logical-sector-size] [-f number-of-FATs] "
|
---|
| 3704 | "[-h hidden-sectors] [-F fat-size] [-r root-dir-entries] [-R reserved-sectors] "
|
---|
| 3705 | */
|
---|
| 3706 | #define mkfs_vfat_full_usage "\n\n" \
|
---|
| 3707 | "Make a FAT32 filesystem\n" \
|
---|
| 3708 | "\nOptions:" \
|
---|
| 3709 | /* "\n -c Check device for bad blocks" */ \
|
---|
| 3710 | "\n -v Verbose" \
|
---|
| 3711 | /* "\n -I Allow to use entire disk device (e.g. /dev/hda)" */ \
|
---|
| 3712 | "\n -n LBL Volume label" \
|
---|
| 3713 |
|
---|
| 3714 | #define mknod_trivial_usage \
|
---|
| 3715 | "[-m MODE] " IF_SELINUX("[-Z] ") "NAME TYPE MAJOR MINOR"
|
---|
| 3716 | #define mknod_full_usage "\n\n" \
|
---|
| 3717 | "Create a special file (block, character, or pipe)\n" \
|
---|
| 3718 | "\nOptions:" \
|
---|
| 3719 | "\n -m MODE Creation mode (default a=rw)" \
|
---|
| 3720 | IF_SELINUX( \
|
---|
| 3721 | "\n -Z Set security context" \
|
---|
| 3722 | ) \
|
---|
| 3723 | "\nTYPE:" \
|
---|
| 3724 | "\n b Block device" \
|
---|
| 3725 | "\n c or u Character device" \
|
---|
| 3726 | "\n p Named pipe (MAJOR and MINOR are ignored)" \
|
---|
| 3727 |
|
---|
| 3728 | #define mknod_example_usage \
|
---|
| 3729 | "$ mknod /dev/fd0 b 2 0\n" \
|
---|
| 3730 | "$ mknod -m 644 /tmp/pipe p\n"
|
---|
| 3731 |
|
---|
| 3732 | #define mkswap_trivial_usage \
|
---|
| 3733 | "[-L LBL] BLOCKDEV [KBYTES]"
|
---|
| 3734 | #define mkswap_full_usage "\n\n" \
|
---|
| 3735 | "Prepare BLOCKDEV to be used as swap partition\n" \
|
---|
| 3736 | "\nOptions:" \
|
---|
| 3737 | "\n -L LBL Label" \
|
---|
| 3738 |
|
---|
| 3739 | #define mktemp_trivial_usage \
|
---|
| 3740 | "[-dt] [-p DIR] [TEMPLATE]"
|
---|
| 3741 | #define mktemp_full_usage "\n\n" \
|
---|
| 3742 | "Create a temporary file with name based on TEMPLATE and print its name.\n" \
|
---|
| 3743 | "TEMPLATE must end with XXXXXX (e.g. [/dir/]nameXXXXXX).\n" \
|
---|
| 3744 | "\nOptions:" \
|
---|
| 3745 | "\n -d Make a directory instead of a file" \
|
---|
| 3746 | /* "\n -q Fail silently if an error occurs" - we ignore it */ \
|
---|
| 3747 | "\n -t Generate a path rooted in temporary directory" \
|
---|
| 3748 | "\n -p DIR Use DIR as a temporary directory (implies -t)" \
|
---|
| 3749 | "\n" \
|
---|
| 3750 | "\nFor -t or -p, directory is chosen as follows:" \
|
---|
| 3751 | "\n$TMPDIR if set, else -p DIR, else /tmp" \
|
---|
| 3752 |
|
---|
| 3753 | #define mktemp_example_usage \
|
---|
| 3754 | "$ mktemp /tmp/temp.XXXXXX\n" \
|
---|
| 3755 | "/tmp/temp.mWiLjM\n" \
|
---|
| 3756 | "$ ls -la /tmp/temp.mWiLjM\n" \
|
---|
| 3757 | "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
|
---|
| 3758 |
|
---|
| 3759 | #define more_trivial_usage \
|
---|
| 3760 | "[FILE]..."
|
---|
| 3761 | #define more_full_usage "\n\n" \
|
---|
| 3762 | "View FILE (or stdin) one screenful at a time"
|
---|
| 3763 |
|
---|
| 3764 | #define more_example_usage \
|
---|
| 3765 | "$ dmesg | more\n"
|
---|
| 3766 |
|
---|
| 3767 | #define mount_trivial_usage \
|
---|
| 3768 | "[OPTIONS] [-o OPTS] DEVICE NODE"
|
---|
| 3769 | #define mount_full_usage "\n\n" \
|
---|
| 3770 | "Mount a filesystem. Filesystem autodetection requires /proc.\n" \
|
---|
| 3771 | "\nOptions:" \
|
---|
| 3772 | "\n -a Mount all filesystems in fstab" \
|
---|
| 3773 | IF_FEATURE_MOUNT_FAKE( \
|
---|
| 3774 | IF_FEATURE_MTAB_SUPPORT( \
|
---|
| 3775 | "\n -f Update /etc/mtab, but don't mount" \
|
---|
| 3776 | ) \
|
---|
| 3777 | IF_NOT_FEATURE_MTAB_SUPPORT( \
|
---|
| 3778 | "\n -f Dry run" \
|
---|
| 3779 | ) \
|
---|
| 3780 | ) \
|
---|
| 3781 | IF_FEATURE_MOUNT_HELPERS( \
|
---|
| 3782 | "\n -i Don't run mount helper" \
|
---|
| 3783 | ) \
|
---|
| 3784 | IF_FEATURE_MTAB_SUPPORT( \
|
---|
| 3785 | "\n -n Don't update /etc/mtab" \
|
---|
| 3786 | ) \
|
---|
| 3787 | "\n -r Read-only mount" \
|
---|
| 3788 | "\n -w Read-write mount (default)" \
|
---|
| 3789 | "\n -t FSTYPE Filesystem type" \
|
---|
| 3790 | "\n -O OPT Mount only filesystems with option OPT (-a only)" \
|
---|
| 3791 | "\n-o OPT:" \
|
---|
| 3792 | IF_FEATURE_MOUNT_LOOP( \
|
---|
| 3793 | "\n loop Ignored (loop devices are autodetected)" \
|
---|
| 3794 | ) \
|
---|
| 3795 | IF_FEATURE_MOUNT_FLAGS( \
|
---|
| 3796 | "\n [a]sync Writes are [a]synchronous" \
|
---|
| 3797 | "\n [no]atime Disable/enable updates to inode access times" \
|
---|
| 3798 | "\n [no]diratime Disable/enable atime updates to directories" \
|
---|
| 3799 | "\n [no]relatime Disable/enable atime updates relative to modification time" \
|
---|
| 3800 | "\n [no]dev (Dis)allow use of special device files" \
|
---|
| 3801 | "\n [no]exec (Dis)allow use of executable files" \
|
---|
| 3802 | "\n [no]suid (Dis)allow set-user-id-root programs" \
|
---|
| 3803 | "\n [r]shared Convert [recursively] to a shared subtree" \
|
---|
| 3804 | "\n [r]slave Convert [recursively] to a slave subtree" \
|
---|
| 3805 | "\n [r]private Convert [recursively] to a private subtree" \
|
---|
| 3806 | "\n [un]bindable Make mount point [un]able to be bind mounted" \
|
---|
| 3807 | "\n bind Bind a file or directory to another location" \
|
---|
| 3808 | "\n move Relocate an existing mount point" \
|
---|
| 3809 | ) \
|
---|
| 3810 | "\n remount Remount a mounted filesystem, changing flags" \
|
---|
| 3811 | "\n ro/rw Same as -r/-w" \
|
---|
| 3812 | "\n" \
|
---|
| 3813 | "\nThere are filesystem-specific -o flags." \
|
---|
| 3814 |
|
---|
| 3815 | #define mount_example_usage \
|
---|
| 3816 | "$ mount\n" \
|
---|
| 3817 | "/dev/hda3 on / type minix (rw)\n" \
|
---|
| 3818 | "proc on /proc type proc (rw)\n" \
|
---|
| 3819 | "devpts on /dev/pts type devpts (rw)\n" \
|
---|
| 3820 | "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
|
---|
| 3821 | "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \
|
---|
| 3822 | "$ mount cd_image.iso mydir\n"
|
---|
| 3823 | #define mount_notes_usage \
|
---|
| 3824 | "Returns 0 for success, number of failed mounts for -a, or errno for one mount."
|
---|
| 3825 |
|
---|
| 3826 | #define mountpoint_trivial_usage \
|
---|
| 3827 | "[-q] <[-dn] DIR | -x DEVICE>"
|
---|
| 3828 | #define mountpoint_full_usage "\n\n" \
|
---|
| 3829 | "Check if the directory is a mountpoint\n" \
|
---|
| 3830 | "\nOptions:" \
|
---|
| 3831 | "\n -q Quiet" \
|
---|
| 3832 | "\n -d Print major/minor device number of the filesystem" \
|
---|
| 3833 | "\n -n Print device name of the filesystem" \
|
---|
| 3834 | "\n -x Print major/minor device number of the blockdevice" \
|
---|
| 3835 |
|
---|
| 3836 | #define mountpoint_example_usage \
|
---|
| 3837 | "$ mountpoint /proc\n" \
|
---|
| 3838 | "/proc is not a mountpoint\n" \
|
---|
| 3839 | "$ mountpoint /sys\n" \
|
---|
| 3840 | "/sys is a mountpoint\n"
|
---|
| 3841 |
|
---|
| 3842 | #define mt_trivial_usage \
|
---|
| 3843 | "[-f device] opcode value"
|
---|
| 3844 | #define mt_full_usage "\n\n" \
|
---|
| 3845 | "Control magnetic tape drive operation\n" \
|
---|
| 3846 | "\n" \
|
---|
| 3847 | "Available Opcodes:\n" \
|
---|
| 3848 | "\n" \
|
---|
| 3849 | "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \
|
---|
| 3850 | "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \
|
---|
| 3851 | "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \
|
---|
| 3852 | "setpart tell unload unlock weof wset" \
|
---|
| 3853 |
|
---|
| 3854 | #define nameif_trivial_usage \
|
---|
| 3855 | "[-s] [-c FILE] [{IFNAME MACADDR}]"
|
---|
| 3856 | #define nameif_full_usage "\n\n" \
|
---|
| 3857 | "Rename network interface while it in the down state\n" \
|
---|
| 3858 | "\nOptions:" \
|
---|
| 3859 | "\n -c FILE Use configuration file (default: /etc/mactab)" \
|
---|
| 3860 | "\n -s Use syslog (LOCAL0 facility)" \
|
---|
| 3861 | "\n IFNAME MACADDR new_interface_name interface_mac_address" \
|
---|
| 3862 |
|
---|
| 3863 | #define nameif_example_usage \
|
---|
| 3864 | "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
|
---|
| 3865 | " or\n" \
|
---|
| 3866 | "$ nameif -c /etc/my_mactab_file\n" \
|
---|
| 3867 |
|
---|
| 3868 | #define nmeter_trivial_usage \
|
---|
| 3869 | "format_string"
|
---|
| 3870 | #define nmeter_full_usage "\n\n" \
|
---|
| 3871 | "Monitor system in real time\n\n" \
|
---|
| 3872 | "Format specifiers:\n" \
|
---|
| 3873 | " %Nc or %[cN] Monitor CPU. N - bar size, default 10\n" \
|
---|
| 3874 | " (displays: S:system U:user N:niced D:iowait I:irq i:softirq)\n" \
|
---|
| 3875 | " %[niface] Monitor network interface 'iface'\n" \
|
---|
| 3876 | " %m Monitor allocated memory\n" \
|
---|
| 3877 | " %[mf] Monitor free memory\n" \
|
---|
| 3878 | " %[mt] Monitor total memory\n" \
|
---|
| 3879 | " %s Monitor allocated swap\n" \
|
---|
| 3880 | " %f Monitor number of used file descriptors\n" \
|
---|
| 3881 | " %Ni Monitor total/specific IRQ rate\n" \
|
---|
| 3882 | " %x Monitor context switch rate\n" \
|
---|
| 3883 | " %p Monitor forks\n" \
|
---|
| 3884 | " %[pn] Monitor # of processes\n" \
|
---|
| 3885 | " %b Monitor block io\n" \
|
---|
| 3886 | " %Nt Show time (with N decimal points)\n" \
|
---|
| 3887 | " %Nd Milliseconds between updates (default:1000)\n" \
|
---|
| 3888 | " %r Print <cr> instead of <lf> at EOL" \
|
---|
| 3889 |
|
---|
| 3890 | #define nmeter_example_usage \
|
---|
| 3891 | "nmeter '%250d%t %20c int %i bio %b mem %m forks%p'"
|
---|
| 3892 |
|
---|
| 3893 | #define nohup_trivial_usage \
|
---|
| 3894 | "PROG ARGS"
|
---|
| 3895 | #define nohup_full_usage "\n\n" \
|
---|
| 3896 | "Run PROG immune to hangups, with output to a non-tty"
|
---|
| 3897 | #define nohup_example_usage \
|
---|
| 3898 | "$ nohup make &"
|
---|
| 3899 |
|
---|
| 3900 | #define nslookup_trivial_usage \
|
---|
| 3901 | "[HOST] [SERVER]"
|
---|
| 3902 | #define nslookup_full_usage "\n\n" \
|
---|
| 3903 | "Query the nameserver for the IP address of the given HOST\n" \
|
---|
| 3904 | "optionally using a specified DNS server"
|
---|
| 3905 | #define nslookup_example_usage \
|
---|
| 3906 | "$ nslookup localhost\n" \
|
---|
| 3907 | "Server: default\n" \
|
---|
| 3908 | "Address: default\n" \
|
---|
| 3909 | "\n" \
|
---|
| 3910 | "Name: debian\n" \
|
---|
| 3911 | "Address: 127.0.0.1\n"
|
---|
| 3912 |
|
---|
| 3913 | #define ntpd_trivial_usage \
|
---|
| 3914 | "[-dnqNw"IF_FEATURE_NTPD_SERVER("l")"] [-S PROG] [-p PEER]..."
|
---|
| 3915 | #define ntpd_full_usage "\n\n" \
|
---|
| 3916 | "NTP client/server\n" \
|
---|
| 3917 | "\nOptions:" \
|
---|
| 3918 | "\n -d Verbose" \
|
---|
| 3919 | "\n -n Do not daemonize" \
|
---|
| 3920 | "\n -q Quit after clock is set" \
|
---|
| 3921 | "\n -N Run at high priority" \
|
---|
| 3922 | "\n -w Do not set time (only query peers), implies -n" \
|
---|
| 3923 | IF_FEATURE_NTPD_SERVER( \
|
---|
| 3924 | "\n -l Run as server on port 123" \
|
---|
| 3925 | ) \
|
---|
| 3926 | "\n -S PROG Run PROG after stepping time, stratum change, and every 11 mins" \
|
---|
| 3927 | "\n -p PEER Obtain time from PEER (may be repeated)" \
|
---|
| 3928 |
|
---|
| 3929 | #define od_trivial_usage \
|
---|
| 3930 | "[-aBbcDdeFfHhIiLlOovXx] " IF_DESKTOP("[-t TYPE] ") "[FILE]"
|
---|
| 3931 | #define od_full_usage "\n\n" \
|
---|
| 3932 | "Write an unambiguous representation, octal bytes by default, of FILE\n" \
|
---|
| 3933 | "(or stdin) to stdout"
|
---|
| 3934 |
|
---|
| 3935 | #define openvt_trivial_usage \
|
---|
| 3936 | "[-c N] [-sw] [PROG ARGS]"
|
---|
| 3937 | #define openvt_full_usage "\n\n" \
|
---|
| 3938 | "Start PROG on a new virtual terminal\n" \
|
---|
| 3939 | "\nOptions:" \
|
---|
| 3940 | "\n -c N Use specified VT" \
|
---|
| 3941 | "\n -s Switch to the VT" \
|
---|
| 3942 | /* "\n -l Run PROG as login shell (by prepending '-')" */ \
|
---|
| 3943 | "\n -w Wait for PROG to exit" \
|
---|
| 3944 |
|
---|
| 3945 | #define openvt_example_usage \
|
---|
| 3946 | "openvt 2 /bin/ash\n"
|
---|
| 3947 |
|
---|
| 3948 | /*
|
---|
| 3949 | #define parse_trivial_usage \
|
---|
| 3950 | "[-n MAXTOKENS] [-m MINTOKENS] [-d DELIMS] [-f FLAGS] FILE..."
|
---|
| 3951 | #define parse_full_usage ""
|
---|
| 3952 | */
|
---|
| 3953 |
|
---|
| 3954 | #define passwd_trivial_usage \
|
---|
| 3955 | "[OPTIONS] [USER]"
|
---|
| 3956 | #define passwd_full_usage "\n\n" \
|
---|
| 3957 | "Change USER's password. If no USER is specified,\n" \
|
---|
| 3958 | "changes the password for the current user.\n" \
|
---|
| 3959 | "\nOptions:" \
|
---|
| 3960 | "\n -a ALG Algorithm to use for password (des, md5)" /* ", sha1)" */ \
|
---|
| 3961 | "\n -d Delete password for the account" \
|
---|
| 3962 | "\n -l Lock (disable) account" \
|
---|
| 3963 | "\n -u Unlock (re-enable) account" \
|
---|
| 3964 |
|
---|
| 3965 | #define chpasswd_trivial_usage \
|
---|
| 3966 | IF_LONG_OPTS("[--md5|--encrypted]") IF_NOT_LONG_OPTS("[-m|-e]")
|
---|
| 3967 | #define chpasswd_full_usage "\n\n" \
|
---|
| 3968 | "Read user:password from stdin and update /etc/passwd\n" \
|
---|
| 3969 | "\nOptions:" \
|
---|
| 3970 | IF_LONG_OPTS( \
|
---|
| 3971 | "\n -e,--encrypted Supplied passwords are in encrypted form" \
|
---|
| 3972 | "\n -m,--md5 Use MD5 encryption instead of DES" \
|
---|
| 3973 | ) \
|
---|
| 3974 | IF_NOT_LONG_OPTS( \
|
---|
| 3975 | "\n -e Supplied passwords are in encrypted form" \
|
---|
| 3976 | "\n -m Use MD5 encryption instead of DES" \
|
---|
| 3977 | )
|
---|
| 3978 |
|
---|
| 3979 | #define pgrep_trivial_usage \
|
---|
| 3980 | "[-flnovx] [-s SID|-P PPID|PATTERN]"
|
---|
| 3981 | #define pgrep_full_usage "\n\n" \
|
---|
| 3982 | "Display process(es) selected by regex PATTERN\n" \
|
---|
| 3983 | "\nOptions:" \
|
---|
| 3984 | "\n -l Show command name too" \
|
---|
| 3985 | "\n -f Match against entire command line" \
|
---|
| 3986 | "\n -n Show the newest process only" \
|
---|
| 3987 | "\n -o Show the oldest process only" \
|
---|
| 3988 | "\n -v Negate the match" \
|
---|
| 3989 | "\n -x Match whole name (not substring)" \
|
---|
| 3990 | "\n -s Match session ID (0 for current)" \
|
---|
| 3991 | "\n -P Match parent process ID" \
|
---|
| 3992 |
|
---|
| 3993 | #if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT)
|
---|
| 3994 | #define pidof_trivial_usage \
|
---|
| 3995 | "[OPTIONS] [NAME]..."
|
---|
| 3996 | #define USAGE_PIDOF "\n\nOptions:"
|
---|
| 3997 | #else
|
---|
| 3998 | #define pidof_trivial_usage \
|
---|
| 3999 | "[NAME]..."
|
---|
| 4000 | #define USAGE_PIDOF /* none */
|
---|
| 4001 | #endif
|
---|
| 4002 | #define pidof_full_usage "\n\n" \
|
---|
| 4003 | "List PIDs of all processes with names that match NAMEs" \
|
---|
| 4004 | USAGE_PIDOF \
|
---|
| 4005 | IF_FEATURE_PIDOF_SINGLE( \
|
---|
| 4006 | "\n -s Show only one PID" \
|
---|
| 4007 | ) \
|
---|
| 4008 | IF_FEATURE_PIDOF_OMIT( \
|
---|
| 4009 | "\n -o PID Omit given pid" \
|
---|
| 4010 | "\n Use %PPID to omit pid of pidof's parent" \
|
---|
| 4011 | ) \
|
---|
| 4012 |
|
---|
| 4013 | #define pidof_example_usage \
|
---|
| 4014 | "$ pidof init\n" \
|
---|
| 4015 | "1\n" \
|
---|
| 4016 | IF_FEATURE_PIDOF_OMIT( \
|
---|
| 4017 | "$ pidof /bin/sh\n20351 5973 5950\n") \
|
---|
| 4018 | IF_FEATURE_PIDOF_OMIT( \
|
---|
| 4019 | "$ pidof /bin/sh -o %PPID\n20351 5950")
|
---|
| 4020 |
|
---|
| 4021 | #if !ENABLE_FEATURE_FANCY_PING
|
---|
| 4022 | #define ping_trivial_usage \
|
---|
| 4023 | "host"
|
---|
| 4024 | #define ping_full_usage "\n\n" \
|
---|
| 4025 | "Send ICMP ECHO_REQUEST packets to network hosts"
|
---|
| 4026 | #define ping6_trivial_usage \
|
---|
| 4027 | "host"
|
---|
| 4028 | #define ping6_full_usage "\n\n" \
|
---|
| 4029 | "Send ICMP ECHO_REQUEST packets to network hosts"
|
---|
| 4030 | #else
|
---|
| 4031 | #define ping_trivial_usage \
|
---|
| 4032 | "[OPTIONS] HOST"
|
---|
| 4033 | #define ping_full_usage "\n\n" \
|
---|
| 4034 | "Send ICMP ECHO_REQUEST packets to network hosts\n" \
|
---|
| 4035 | "\nOptions:" \
|
---|
| 4036 | "\n -4,-6 Force IP or IPv6 name resolution" \
|
---|
| 4037 | "\n -c CNT Send only CNT pings" \
|
---|
| 4038 | "\n -s SIZE Send SIZE data bytes in packets (default:56)" \
|
---|
| 4039 | "\n -I IFACE/IP Use interface or IP address as source" \
|
---|
| 4040 | "\n -W SEC Seconds to wait for the first response (default:10)" \
|
---|
| 4041 | "\n (after all -c CNT packets are sent)" \
|
---|
| 4042 | "\n -w SEC Seconds until ping exits (default:infinite)" \
|
---|
| 4043 | "\n (can exit earlier with -c CNT)" \
|
---|
| 4044 | "\n -q Quiet, only displays output at start" \
|
---|
| 4045 | "\n and when finished" \
|
---|
| 4046 |
|
---|
| 4047 | #define ping6_trivial_usage \
|
---|
| 4048 | "[OPTIONS] HOST"
|
---|
| 4049 | #define ping6_full_usage "\n\n" \
|
---|
| 4050 | "Send ICMP ECHO_REQUEST packets to network hosts\n" \
|
---|
| 4051 | "\nOptions:" \
|
---|
| 4052 | "\n -c CNT Send only CNT pings" \
|
---|
| 4053 | "\n -s SIZE Send SIZE data bytes in packets (default:56)" \
|
---|
| 4054 | "\n -I IFACE/IP Use interface or IP address as source" \
|
---|
| 4055 | "\n -q Quiet, only displays output at start" \
|
---|
| 4056 | "\n and when finished" \
|
---|
| 4057 |
|
---|
| 4058 | #endif
|
---|
| 4059 | #define ping_example_usage \
|
---|
| 4060 | "$ ping localhost\n" \
|
---|
| 4061 | "PING slag (127.0.0.1): 56 data bytes\n" \
|
---|
| 4062 | "64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \
|
---|
| 4063 | "\n" \
|
---|
| 4064 | "--- debian ping statistics ---\n" \
|
---|
| 4065 | "1 packets transmitted, 1 packets received, 0% packet loss\n" \
|
---|
| 4066 | "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
|
---|
| 4067 | #define ping6_example_usage \
|
---|
| 4068 | "$ ping6 ip6-localhost\n" \
|
---|
| 4069 | "PING ip6-localhost (::1): 56 data bytes\n" \
|
---|
| 4070 | "64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \
|
---|
| 4071 | "\n" \
|
---|
| 4072 | "--- ip6-localhost ping statistics ---\n" \
|
---|
| 4073 | "1 packets transmitted, 1 packets received, 0% packet loss\n" \
|
---|
| 4074 | "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
|
---|
| 4075 |
|
---|
| 4076 | #define pipe_progress_trivial_usage NOUSAGE_STR
|
---|
| 4077 | #define pipe_progress_full_usage ""
|
---|
| 4078 |
|
---|
| 4079 | #define pivot_root_trivial_usage \
|
---|
| 4080 | "NEW_ROOT PUT_OLD"
|
---|
| 4081 | #define pivot_root_full_usage "\n\n" \
|
---|
| 4082 | "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \
|
---|
| 4083 | "the new root file system"
|
---|
| 4084 |
|
---|
| 4085 | #define pkill_trivial_usage \
|
---|
| 4086 | "[-l|-SIGNAL] [-fnovx] [-s SID|-P PPID|PATTERN]"
|
---|
| 4087 | #define pkill_full_usage "\n\n" \
|
---|
| 4088 | "Send a signal to process(es) selected by regex PATTERN\n" \
|
---|
| 4089 | "\nOptions:" \
|
---|
| 4090 | "\n -l List all signals" \
|
---|
| 4091 | "\n -f Match against entire command line" \
|
---|
| 4092 | "\n -n Signal the newest process only" \
|
---|
| 4093 | "\n -o Signal the oldest process only" \
|
---|
| 4094 | "\n -v Negate the match" \
|
---|
| 4095 | "\n -x Match whole name (not substring)" \
|
---|
| 4096 | "\n -s Match session ID (0 for current)" \
|
---|
| 4097 | "\n -P Match parent process ID" \
|
---|
| 4098 |
|
---|
| 4099 | #define popmaildir_trivial_usage \
|
---|
| 4100 | "[OPTIONS] MAILDIR [CONN_HELPER ARGS]"
|
---|
| 4101 | #define popmaildir_full_usage "\n\n" \
|
---|
| 4102 | "Fetch content of remote mailbox to local maildir\n" \
|
---|
| 4103 | "\nOptions:" \
|
---|
| 4104 | /* "\n -b Binary mode. Ignored" */ \
|
---|
| 4105 | /* "\n -d Debug. Ignored" */ \
|
---|
| 4106 | /* "\n -m Show used memory. Ignored" */ \
|
---|
| 4107 | /* "\n -V Show version. Ignored" */ \
|
---|
| 4108 | /* "\n -c Use tcpclient. Ignored" */ \
|
---|
| 4109 | /* "\n -a Use APOP protocol. Implied. If server supports APOP -> use it" */ \
|
---|
| 4110 | "\n -s Skip authorization" \
|
---|
| 4111 | "\n -T Get messages with TOP instead of RETR" \
|
---|
| 4112 | "\n -k Keep retrieved messages on the server" \
|
---|
| 4113 | "\n -t SEC Network timeout" \
|
---|
| 4114 | IF_FEATURE_POPMAILDIR_DELIVERY( \
|
---|
| 4115 | "\n -F \"PROG ARGS\" Filter program (may be repeated)" \
|
---|
| 4116 | "\n -M \"PROG ARGS\" Delivery program" \
|
---|
| 4117 | ) \
|
---|
| 4118 | "\n" \
|
---|
| 4119 | "\nFetch from plain POP3 server:" \
|
---|
| 4120 | "\npopmaildir -k DIR nc pop3.server.com 110 <user_and_pass.txt" \
|
---|
| 4121 | "\nFetch from SSLed POP3 server and delete fetched emails:" \
|
---|
| 4122 | "\npopmaildir DIR -- openssl s_client -quiet -connect pop3.server.com:995 <user_and_pass.txt"
|
---|
| 4123 | /* "\n -R BYTES Remove old messages on the server >= BYTES. Ignored" */
|
---|
| 4124 | /* "\n -Z N1-N2 Remove messages from N1 to N2 (dangerous). Ignored" */
|
---|
| 4125 | /* "\n -L BYTES Don't retrieve new messages >= BYTES. Ignored" */
|
---|
| 4126 | /* "\n -H LINES Type first LINES of a message. Ignored" */
|
---|
| 4127 | #define popmaildir_example_usage \
|
---|
| 4128 | "$ popmaildir -k ~/Maildir -- nc pop.drvv.ru 110 [<password_file]\n" \
|
---|
| 4129 | "$ popmaildir ~/Maildir -- openssl s_client -quiet -connect pop.gmail.com:995 [<password_file]\n"
|
---|
| 4130 |
|
---|
| 4131 | #define printenv_trivial_usage \
|
---|
| 4132 | "[VARIABLE]..."
|
---|
| 4133 | #define printenv_full_usage "\n\n" \
|
---|
| 4134 | "Print environment VARIABLEs.\n" \
|
---|
| 4135 | "If no VARIABLE specified, print all."
|
---|
| 4136 |
|
---|
| 4137 | #define printf_trivial_usage \
|
---|
| 4138 | "FORMAT [ARGUMENT]..."
|
---|
| 4139 | #define printf_full_usage "\n\n" \
|
---|
| 4140 | "Format and print ARGUMENT(s) according to FORMAT,\n" \
|
---|
| 4141 | "where FORMAT controls the output exactly as in C printf"
|
---|
| 4142 | #define printf_example_usage \
|
---|
| 4143 | "$ printf \"Val=%d\\n\" 5\n" \
|
---|
| 4144 | "Val=5\n"
|
---|
| 4145 |
|
---|
| 4146 |
|
---|
| 4147 | #if ENABLE_DESKTOP
|
---|
| 4148 |
|
---|
| 4149 | #define ps_trivial_usage \
|
---|
| 4150 | "[-o COL1,COL2=HEADER]" IF_FEATURE_SHOW_THREADS(" [-T]")
|
---|
| 4151 | #define ps_full_usage "\n\n" \
|
---|
| 4152 | "Show list of processes\n" \
|
---|
| 4153 | "\nOptions:" \
|
---|
| 4154 | "\n -o COL1,COL2=HEADER Select columns for display" \
|
---|
| 4155 | IF_FEATURE_SHOW_THREADS( \
|
---|
| 4156 | "\n -T Show threads" \
|
---|
| 4157 | )
|
---|
| 4158 |
|
---|
| 4159 | #else /* !ENABLE_DESKTOP */
|
---|
| 4160 |
|
---|
| 4161 | #if !ENABLE_SELINUX && !ENABLE_FEATURE_PS_WIDE
|
---|
| 4162 | #define USAGE_PS "\nThis version of ps accepts no options"
|
---|
| 4163 | #else
|
---|
| 4164 | #define USAGE_PS "\nOptions:"
|
---|
| 4165 | #endif
|
---|
| 4166 |
|
---|
| 4167 | #define ps_trivial_usage \
|
---|
| 4168 | ""
|
---|
| 4169 | #define ps_full_usage "\n\n" \
|
---|
| 4170 | "Show list of processes\n" \
|
---|
| 4171 | USAGE_PS \
|
---|
| 4172 | IF_SELINUX( \
|
---|
| 4173 | "\n -Z Show selinux context" \
|
---|
| 4174 | ) \
|
---|
| 4175 | IF_FEATURE_PS_WIDE( \
|
---|
| 4176 | "\n w Wide output" \
|
---|
| 4177 | )
|
---|
| 4178 |
|
---|
| 4179 | #endif /* ENABLE_DESKTOP */
|
---|
| 4180 |
|
---|
| 4181 | #define ps_example_usage \
|
---|
| 4182 | "$ ps\n" \
|
---|
| 4183 | " PID Uid Gid State Command\n" \
|
---|
| 4184 | " 1 root root S init\n" \
|
---|
| 4185 | " 2 root root S [kflushd]\n" \
|
---|
| 4186 | " 3 root root S [kupdate]\n" \
|
---|
| 4187 | " 4 root root S [kpiod]\n" \
|
---|
| 4188 | " 5 root root S [kswapd]\n" \
|
---|
| 4189 | " 742 andersen andersen S [bash]\n" \
|
---|
| 4190 | " 743 andersen andersen S -bash\n" \
|
---|
| 4191 | " 745 root root S [getty]\n" \
|
---|
| 4192 | " 2990 andersen andersen R ps\n" \
|
---|
| 4193 |
|
---|
| 4194 | #define pscan_trivial_usage \
|
---|
| 4195 | "[-cb] [-p MIN_PORT] [-P MAX_PORT] [-t TIMEOUT] [-T MIN_RTT] HOST"
|
---|
| 4196 | #define pscan_full_usage "\n\n" \
|
---|
| 4197 | "Scan a host, print all open ports\n" \
|
---|
| 4198 | "\nOptions:" \
|
---|
| 4199 | "\n -c Show closed ports too" \
|
---|
| 4200 | "\n -b Show blocked ports too" \
|
---|
| 4201 | "\n -p Scan from this port (default 1)" \
|
---|
| 4202 | "\n -P Scan up to this port (default 1024)" \
|
---|
| 4203 | "\n -t Timeout (default 5000 ms)" \
|
---|
| 4204 | "\n -T Minimum rtt (default 5 ms, increase for congested hosts)" \
|
---|
| 4205 |
|
---|
| 4206 | #define pwd_trivial_usage \
|
---|
| 4207 | ""
|
---|
| 4208 | #define pwd_full_usage "\n\n" \
|
---|
| 4209 | "Print the full filename of the current working directory"
|
---|
| 4210 | #define pwd_example_usage \
|
---|
| 4211 | "$ pwd\n" \
|
---|
| 4212 | "/root\n"
|
---|
| 4213 |
|
---|
| 4214 | #define raidautorun_trivial_usage \
|
---|
| 4215 | "DEVICE"
|
---|
| 4216 | #define raidautorun_full_usage "\n\n" \
|
---|
| 4217 | "Tell the kernel to automatically search and start RAID arrays"
|
---|
| 4218 | #define raidautorun_example_usage \
|
---|
| 4219 | "$ raidautorun /dev/md0"
|
---|
| 4220 |
|
---|
| 4221 | #define rdate_trivial_usage \
|
---|
| 4222 | "[-sp] HOST"
|
---|
| 4223 | #define rdate_full_usage "\n\n" \
|
---|
| 4224 | "Get and possibly set the system date and time from a remote HOST\n" \
|
---|
| 4225 | "\nOptions:" \
|
---|
| 4226 | "\n -s Set the system date and time (default)" \
|
---|
| 4227 | "\n -p Print the date and time" \
|
---|
| 4228 |
|
---|
| 4229 | #define rdev_trivial_usage \
|
---|
| 4230 | ""
|
---|
| 4231 | #define rdev_full_usage "\n\n" \
|
---|
| 4232 | "Print the device node associated with the filesystem mounted at '/'"
|
---|
| 4233 | #define rdev_example_usage \
|
---|
| 4234 | "$ rdev\n" \
|
---|
| 4235 | "/dev/mtdblock9 /\n"
|
---|
| 4236 |
|
---|
| 4237 | #define readahead_trivial_usage \
|
---|
| 4238 | "[FILE]..."
|
---|
| 4239 | #define readahead_full_usage "\n\n" \
|
---|
| 4240 | "Preload FILEs to RAM"
|
---|
| 4241 |
|
---|
| 4242 | #define readlink_trivial_usage \
|
---|
| 4243 | IF_FEATURE_READLINK_FOLLOW("[-fnv] ") "FILE"
|
---|
| 4244 | #define readlink_full_usage "\n\n" \
|
---|
| 4245 | "Display the value of a symlink" \
|
---|
| 4246 | IF_FEATURE_READLINK_FOLLOW( "\n" \
|
---|
| 4247 | "\nOptions:" \
|
---|
| 4248 | "\n -f Canonicalize by following all symlinks" \
|
---|
| 4249 | "\n -n Don't add newline" \
|
---|
| 4250 | "\n -v Verbose" \
|
---|
| 4251 | ) \
|
---|
| 4252 |
|
---|
| 4253 | #define readprofile_trivial_usage \
|
---|
| 4254 | "[OPTIONS]"
|
---|
| 4255 | #define readprofile_full_usage "\n\n" \
|
---|
| 4256 | "Options:" \
|
---|
| 4257 | "\n -m mapfile (Default: /boot/System.map)" \
|
---|
| 4258 | "\n -p profile (Default: /proc/profile)" \
|
---|
| 4259 | "\n -M NUM Set the profiling multiplier to NUM" \
|
---|
| 4260 | "\n -i Print only info about the sampling step" \
|
---|
| 4261 | "\n -v Verbose" \
|
---|
| 4262 | "\n -a Print all symbols, even if count is 0" \
|
---|
| 4263 | "\n -b Print individual histogram-bin counts" \
|
---|
| 4264 | "\n -s Print individual counters within functions" \
|
---|
| 4265 | "\n -r Reset all the counters (root only)" \
|
---|
| 4266 | "\n -n Disable byte order auto-detection" \
|
---|
| 4267 |
|
---|
| 4268 | #define realpath_trivial_usage \
|
---|
| 4269 | "FILE..."
|
---|
| 4270 | #define realpath_full_usage "\n\n" \
|
---|
| 4271 | "Return the absolute pathnames of given FILE"
|
---|
| 4272 |
|
---|
| 4273 | #define reformime_trivial_usage \
|
---|
| 4274 | "[OPTIONS] [FILE]..."
|
---|
| 4275 | #define reformime_full_usage "\n\n" \
|
---|
| 4276 | "Parse MIME-encoded message\n" \
|
---|
| 4277 | "\nOptions:" \
|
---|
| 4278 | "\n -x PREFIX Extract content of MIME sections to files" \
|
---|
| 4279 | "\n -X PROG ARGS Filter content of MIME sections through PROG" \
|
---|
| 4280 | "\n Must be the last option" \
|
---|
| 4281 | "\n" \
|
---|
| 4282 | "\nOther options are silently ignored" \
|
---|
| 4283 |
|
---|
| 4284 | #define scriptreplay_trivial_usage \
|
---|
| 4285 | "timingfile [typescript [divisor]]"
|
---|
| 4286 | #define scriptreplay_full_usage "\n\n" \
|
---|
| 4287 | "Play back typescripts, using timing information"
|
---|
| 4288 |
|
---|
| 4289 | #define reset_trivial_usage \
|
---|
| 4290 | ""
|
---|
| 4291 | #define reset_full_usage "\n\n" \
|
---|
| 4292 | "Reset the screen"
|
---|
| 4293 |
|
---|
| 4294 | #define resize_trivial_usage \
|
---|
| 4295 | ""
|
---|
| 4296 | #define resize_full_usage "\n\n" \
|
---|
| 4297 | "Resize the screen"
|
---|
| 4298 |
|
---|
| 4299 | #define restorecon_trivial_usage \
|
---|
| 4300 | "[-iFnRv] [-e EXCLUDEDIR]... [-o FILE] [-f FILE]"
|
---|
| 4301 | #define restorecon_full_usage "\n\n" \
|
---|
| 4302 | "Reset security contexts of files in pathname\n" \
|
---|
| 4303 | "\n -i Ignore files that don't exist" \
|
---|
| 4304 | "\n -f FILE File with list of files to process" \
|
---|
| 4305 | "\n -e DIR Directory to exclude" \
|
---|
| 4306 | "\n -R,-r Recurse" \
|
---|
| 4307 | "\n -n Don't change any file labels" \
|
---|
| 4308 | "\n -o FILE Save list of files with incorrect context" \
|
---|
| 4309 | "\n -v Verbose" \
|
---|
| 4310 | "\n -vv Show changed labels" \
|
---|
| 4311 | "\n -F Force reset of context to match file_context" \
|
---|
| 4312 | "\n for customizable files, or the user section," \
|
---|
| 4313 | "\n if it has changed" \
|
---|
| 4314 |
|
---|
| 4315 | #define rfkill_trivial_usage \
|
---|
| 4316 | "COMMAND [INDEX|TYPE]"
|
---|
| 4317 | #define rfkill_full_usage "\n\n" \
|
---|
| 4318 | "Enable/disable wireless devices\n" \
|
---|
| 4319 | "\nCommands:" \
|
---|
| 4320 | "\n list [INDEX|TYPE] List current state" \
|
---|
| 4321 | "\n block INDEX|TYPE Disable device" \
|
---|
| 4322 | "\n unblock INDEX|TYPE Enable device" \
|
---|
| 4323 | "\n" \
|
---|
| 4324 | "\n TYPE: all, wlan(wifi), bluetooth, uwb(ultrawideband)," \
|
---|
| 4325 | "\n wimax, wwan, gps, fm" \
|
---|
| 4326 |
|
---|
| 4327 | #define rm_trivial_usage \
|
---|
| 4328 | "[-irf] FILE..."
|
---|
| 4329 | #define rm_full_usage "\n\n" \
|
---|
| 4330 | "Remove (unlink) FILEs\n" \
|
---|
| 4331 | "\nOptions:" \
|
---|
| 4332 | "\n -i Always prompt before removing" \
|
---|
| 4333 | "\n -f Never prompt" \
|
---|
| 4334 | "\n -R,-r Recurse" \
|
---|
| 4335 |
|
---|
| 4336 | #define rm_example_usage \
|
---|
| 4337 | "$ rm -rf /tmp/foo\n"
|
---|
| 4338 |
|
---|
| 4339 | #define rmdir_trivial_usage \
|
---|
| 4340 | "[OPTIONS] DIRECTORY..."
|
---|
| 4341 | #define rmdir_full_usage "\n\n" \
|
---|
| 4342 | "Remove DIRECTORY if it is empty\n" \
|
---|
| 4343 | "\nOptions:" \
|
---|
| 4344 | IF_FEATURE_RMDIR_LONG_OPTIONS( \
|
---|
| 4345 | "\n -p|--parents Include parents" \
|
---|
| 4346 | "\n --ignore-fail-on-non-empty" \
|
---|
| 4347 | ) \
|
---|
| 4348 | IF_NOT_FEATURE_RMDIR_LONG_OPTIONS( \
|
---|
| 4349 | "\n -p Include parents" \
|
---|
| 4350 | )
|
---|
| 4351 |
|
---|
| 4352 | #define rmdir_example_usage \
|
---|
| 4353 | "# rmdir /tmp/foo\n"
|
---|
| 4354 |
|
---|
| 4355 | #define route_trivial_usage \
|
---|
| 4356 | "[{add|del|delete}]"
|
---|
| 4357 | #define route_full_usage "\n\n" \
|
---|
| 4358 | "Edit kernel routing tables\n" \
|
---|
| 4359 | "\nOptions:" \
|
---|
| 4360 | "\n -n Don't resolve names" \
|
---|
| 4361 | "\n -e Display other/more information" \
|
---|
| 4362 | "\n -A inet" IF_FEATURE_IPV6("{6}") " Select address family" \
|
---|
| 4363 |
|
---|
| 4364 | #define rpm_trivial_usage \
|
---|
| 4365 | "-i PACKAGE.rpm; rpm -qp[ildc] PACKAGE.rpm"
|
---|
| 4366 | #define rpm_full_usage "\n\n" \
|
---|
| 4367 | "Manipulate RPM packages\n" \
|
---|
| 4368 | "\nCommands:" \
|
---|
| 4369 | "\n -i Install package" \
|
---|
| 4370 | "\n -qp Query package" \
|
---|
| 4371 | "\nOptions:" \
|
---|
| 4372 | "\n -i Show information" \
|
---|
| 4373 | "\n -l List contents" \
|
---|
| 4374 | "\n -d List documents" \
|
---|
| 4375 | "\n -c List config files" \
|
---|
| 4376 |
|
---|
| 4377 | #define rpm2cpio_trivial_usage \
|
---|
| 4378 | "package.rpm"
|
---|
| 4379 | #define rpm2cpio_full_usage "\n\n" \
|
---|
| 4380 | "Output a cpio archive of the rpm file"
|
---|
| 4381 |
|
---|
| 4382 | #define rtcwake_trivial_usage \
|
---|
| 4383 | "[-a | -l | -u] [-d DEV] [-m MODE] [-s SEC | -t TIME]"
|
---|
| 4384 | #define rtcwake_full_usage "\n\n" \
|
---|
| 4385 | "Enter a system sleep state until specified wakeup time\n" \
|
---|
| 4386 | IF_LONG_OPTS( \
|
---|
| 4387 | "\n -a,--auto Read clock mode from adjtime" \
|
---|
| 4388 | "\n -l,--local Clock is set to local time" \
|
---|
| 4389 | "\n -u,--utc Clock is set to UTC time" \
|
---|
| 4390 | "\n -d,--device=DEV Specify the RTC device" \
|
---|
| 4391 | "\n -m,--mode=MODE Set the sleep state (default: standby)" \
|
---|
| 4392 | "\n -s,--seconds=SEC Set the timeout in SEC seconds from now" \
|
---|
| 4393 | "\n -t,--time=TIME Set the timeout to TIME seconds from epoch" \
|
---|
| 4394 | ) \
|
---|
| 4395 | IF_NOT_LONG_OPTS( \
|
---|
| 4396 | "\n -a Read clock mode from adjtime" \
|
---|
| 4397 | "\n -l Clock is set to local time" \
|
---|
| 4398 | "\n -u Clock is set to UTC time" \
|
---|
| 4399 | "\n -d DEV Specify the RTC device" \
|
---|
| 4400 | "\n -m MODE Set the sleep state (default: standby)" \
|
---|
| 4401 | "\n -s SEC Set the timeout in SEC seconds from now" \
|
---|
| 4402 | "\n -t TIME Set the timeout to TIME seconds from epoch" \
|
---|
| 4403 | )
|
---|
| 4404 |
|
---|
| 4405 | #define runcon_trivial_usage \
|
---|
| 4406 | "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] PROG ARGS\n" \
|
---|
| 4407 | "runcon CONTEXT PROG ARGS"
|
---|
| 4408 | #define runcon_full_usage "\n\n" \
|
---|
| 4409 | "Run PROG in a different security context\n" \
|
---|
| 4410 | "\n CONTEXT Complete security context\n" \
|
---|
| 4411 | IF_FEATURE_RUNCON_LONG_OPTIONS( \
|
---|
| 4412 | "\n -c,--compute Compute process transition context before modifying" \
|
---|
| 4413 | "\n -t,--type=TYPE Type (for same role as parent)" \
|
---|
| 4414 | "\n -u,--user=USER User identity" \
|
---|
| 4415 | "\n -r,--role=ROLE Role" \
|
---|
| 4416 | "\n -l,--range=RNG Levelrange" \
|
---|
| 4417 | ) \
|
---|
| 4418 | IF_NOT_FEATURE_RUNCON_LONG_OPTIONS( \
|
---|
| 4419 | "\n -c Compute process transition context before modifying" \
|
---|
| 4420 | "\n -t TYPE Type (for same role as parent)" \
|
---|
| 4421 | "\n -u USER User identity" \
|
---|
| 4422 | "\n -r ROLE Role" \
|
---|
| 4423 | "\n -l RNG Levelrange" \
|
---|
| 4424 | )
|
---|
| 4425 |
|
---|
| 4426 | #define run_parts_trivial_usage \
|
---|
| 4427 | "[-t] "IF_FEATURE_RUN_PARTS_FANCY("[-l] ")"[-a ARG] [-u MASK] DIRECTORY"
|
---|
| 4428 | #define run_parts_full_usage "\n\n" \
|
---|
| 4429 | "Run a bunch of scripts in DIRECTORY\n" \
|
---|
| 4430 | "\nOptions:" \
|
---|
| 4431 | "\n -t Print what would be run, but don't actually run anything" \
|
---|
| 4432 | "\n -a ARG Pass ARG as argument for every program" \
|
---|
| 4433 | "\n -u MASK Set the umask to MASK before running every program" \
|
---|
| 4434 | IF_FEATURE_RUN_PARTS_FANCY( \
|
---|
| 4435 | "\n -l Print names of all matching files even if they are not executable" \
|
---|
| 4436 | )
|
---|
| 4437 |
|
---|
| 4438 | #define run_parts_example_usage \
|
---|
| 4439 | "$ run-parts -a start /etc/init.d\n" \
|
---|
| 4440 | "$ run-parts -a stop=now /etc/init.d\n\n" \
|
---|
| 4441 | "Let's assume you have a script foo/dosomething:\n" \
|
---|
| 4442 | "#!/bin/sh\n" \
|
---|
| 4443 | "for i in $*; do eval $i; done; unset i\n" \
|
---|
| 4444 | "case \"$1\" in\n" \
|
---|
| 4445 | "start*) echo starting something;;\n" \
|
---|
| 4446 | "stop*) set -x; shutdown -h $stop;;\n" \
|
---|
| 4447 | "esac\n\n" \
|
---|
| 4448 | "Running this yields:\n" \
|
---|
| 4449 | "$run-parts -a stop=+4m foo/\n" \
|
---|
| 4450 | "+ shutdown -h +4m"
|
---|
| 4451 |
|
---|
| 4452 | #define runlevel_trivial_usage \
|
---|
| 4453 | "[FILE]"
|
---|
| 4454 | #define runlevel_full_usage "\n\n" \
|
---|
| 4455 | "Find the current and previous system runlevel\n" \
|
---|
| 4456 | "\n" \
|
---|
| 4457 | "If no utmp FILE exists or if no runlevel record can be found,\n" \
|
---|
| 4458 | "print \"unknown\""
|
---|
| 4459 | #define runlevel_example_usage \
|
---|
| 4460 | "$ runlevel /var/run/utmp\n" \
|
---|
| 4461 | "N 2"
|
---|
| 4462 |
|
---|
| 4463 | #define runsv_trivial_usage \
|
---|
| 4464 | "DIR"
|
---|
| 4465 | #define runsv_full_usage "\n\n" \
|
---|
| 4466 | "Start and monitor a service and optionally an appendant log service"
|
---|
| 4467 |
|
---|
| 4468 | #define runsvdir_trivial_usage \
|
---|
| 4469 | "[-P] [-s SCRIPT] DIR"
|
---|
| 4470 | #define runsvdir_full_usage "\n\n" \
|
---|
| 4471 | "Start a runsv process for each subdirectory. If it exits, restart it.\n" \
|
---|
| 4472 | "\n -P Put each runsv in a new session" \
|
---|
| 4473 | "\n -s SCRIPT Run SCRIPT <signo> after signal is processed" \
|
---|
| 4474 |
|
---|
| 4475 | #define rx_trivial_usage \
|
---|
| 4476 | "FILE"
|
---|
| 4477 | #define rx_full_usage "\n\n" \
|
---|
| 4478 | "Receive a file using the xmodem protocol"
|
---|
| 4479 | #define rx_example_usage \
|
---|
| 4480 | "$ rx /tmp/foo\n"
|
---|
| 4481 |
|
---|
| 4482 | #define script_trivial_usage \
|
---|
| 4483 | "[-afq" IF_SCRIPTREPLAY("t") "] [-c PROG] [OUTFILE]"
|
---|
| 4484 | #define script_full_usage "\n\n" \
|
---|
| 4485 | "Options:" \
|
---|
| 4486 | "\n -a Append output" \
|
---|
| 4487 | "\n -c PROG Run PROG, not shell" \
|
---|
| 4488 | "\n -f Flush output after each write" \
|
---|
| 4489 | "\n -q Quiet" \
|
---|
| 4490 | IF_SCRIPTREPLAY( \
|
---|
| 4491 | "\n -t Send timing to stderr" \
|
---|
| 4492 | )
|
---|
| 4493 |
|
---|
| 4494 | #define sed_trivial_usage \
|
---|
| 4495 | "[-efinr] SED_CMD [FILE]..."
|
---|
| 4496 | #define sed_full_usage "\n\n" \
|
---|
| 4497 | "Options:" \
|
---|
| 4498 | "\n -e CMD Add CMD to sed commands to be executed" \
|
---|
| 4499 | "\n -f FILE Add FILE contents to sed commands to be executed" \
|
---|
| 4500 | "\n -i Edit files in-place (else sends result to stdout)" \
|
---|
| 4501 | "\n -n Suppress automatic printing of pattern space" \
|
---|
| 4502 | "\n -r Use extended regex syntax" \
|
---|
| 4503 | "\n" \
|
---|
| 4504 | "\nIf no -e or -f, the first non-option argument is the sed command string." \
|
---|
| 4505 | "\nRemaining arguments are input files (stdin if none)."
|
---|
| 4506 |
|
---|
| 4507 | #define sed_example_usage \
|
---|
| 4508 | "$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
|
---|
| 4509 | "bar\n"
|
---|
| 4510 |
|
---|
| 4511 | #define selinuxenabled_trivial_usage NOUSAGE_STR
|
---|
| 4512 | #define selinuxenabled_full_usage ""
|
---|
| 4513 |
|
---|
| 4514 | #define sendmail_trivial_usage \
|
---|
| 4515 | "[OPTIONS] [RECIPIENT_EMAIL]..."
|
---|
| 4516 | #define sendmail_full_usage "\n\n" \
|
---|
| 4517 | "Read email from stdin and send it\n" \
|
---|
| 4518 | "\nStandard options:" \
|
---|
| 4519 | "\n -t Read additional recipients from message body" \
|
---|
| 4520 | "\n -f sender Sender (required)" \
|
---|
| 4521 | "\n -o options Various options. -oi implied, others are ignored" \
|
---|
| 4522 | "\n -i -oi synonym. implied and ignored" \
|
---|
| 4523 | "\n" \
|
---|
| 4524 | "\nBusybox specific options:" \
|
---|
| 4525 | "\n -w seconds Network timeout" \
|
---|
| 4526 | "\n -H 'PROG ARGS' Run connection helper" \
|
---|
| 4527 | "\n Examples:" \
|
---|
| 4528 | "\n -H 'exec openssl s_client -quiet -tls1 -starttls smtp" \
|
---|
| 4529 | "\n -connect smtp.gmail.com:25' <email.txt" \
|
---|
| 4530 | "\n [4<username_and_passwd.txt | -au<username> -ap<password>]" \
|
---|
| 4531 | "\n -H 'exec openssl s_client -quiet -tls1" \
|
---|
| 4532 | "\n -connect smtp.gmail.com:465' <email.txt" \
|
---|
| 4533 | "\n [4<username_and_passwd.txt | -au<username> -ap<password>]" \
|
---|
| 4534 | "\n -S server[:port] Server" \
|
---|
| 4535 | "\n -au<username> Username for AUTH LOGIN" \
|
---|
| 4536 | "\n -ap<password> Password for AUTH LOGIN" \
|
---|
| 4537 | "\n -am<method> Authentication method. Ignored. LOGIN is implied" \
|
---|
| 4538 | "\n" \
|
---|
| 4539 | "\nOther options are silently ignored; -oi -t is implied" \
|
---|
| 4540 | IF_MAKEMIME( \
|
---|
| 4541 | "\nUse makemime applet to create message with attachments" \
|
---|
| 4542 | )
|
---|
| 4543 |
|
---|
| 4544 | #define seq_trivial_usage \
|
---|
| 4545 | "[-w] [-s SEP] [FIRST [INC]] LAST"
|
---|
| 4546 | #define seq_full_usage "\n\n" \
|
---|
| 4547 | "Print numbers from FIRST to LAST, in steps of INC.\n" \
|
---|
| 4548 | "FIRST, INC default to 1.\n" \
|
---|
| 4549 | "\nOptions:" \
|
---|
| 4550 | "\n -w Pad to last with leading zeros" \
|
---|
| 4551 | "\n -s SEP String separator" \
|
---|
| 4552 |
|
---|
| 4553 | #define sestatus_trivial_usage \
|
---|
| 4554 | "[-vb]"
|
---|
| 4555 | #define sestatus_full_usage "\n\n" \
|
---|
| 4556 | " -v Verbose" \
|
---|
| 4557 | "\n -b Display current state of booleans" \
|
---|
| 4558 |
|
---|
| 4559 | #define setconsole_trivial_usage \
|
---|
| 4560 | "[-r" IF_FEATURE_SETCONSOLE_LONG_OPTIONS("|--reset") "] [DEVICE]"
|
---|
| 4561 | #define setconsole_full_usage "\n\n" \
|
---|
| 4562 | "Redirect system console output to DEVICE (default: /dev/tty)\n" \
|
---|
| 4563 | "\nOptions:" \
|
---|
| 4564 | "\n -r Reset output to /dev/console" \
|
---|
| 4565 |
|
---|
| 4566 | #define setenforce_trivial_usage \
|
---|
| 4567 | "[Enforcing | Permissive | 1 | 0]"
|
---|
| 4568 | #define setenforce_full_usage ""
|
---|
| 4569 |
|
---|
| 4570 | #define setfiles_trivial_usage \
|
---|
| 4571 | "[-dnpqsvW] [-e DIR]... [-o FILE] [-r alt_root_path]" \
|
---|
| 4572 | IF_FEATURE_SETFILES_CHECK_OPTION( \
|
---|
| 4573 | " [-c policyfile] spec_file" \
|
---|
| 4574 | ) \
|
---|
| 4575 | " pathname"
|
---|
| 4576 | #define setfiles_full_usage "\n\n" \
|
---|
| 4577 | "Reset file contexts under pathname according to spec_file\n" \
|
---|
| 4578 | IF_FEATURE_SETFILES_CHECK_OPTION( \
|
---|
| 4579 | "\n -c FILE Check the validity of the contexts against the specified binary policy" \
|
---|
| 4580 | ) \
|
---|
| 4581 | "\n -d Show which specification matched each file" \
|
---|
| 4582 | "\n -l Log changes in file labels to syslog" \
|
---|
| 4583 | "\n -n Don't change any file labels" \
|
---|
| 4584 | "\n -q Suppress warnings" \
|
---|
| 4585 | "\n -r DIR Use an alternate root path" \
|
---|
| 4586 | "\n -e DIR Exclude DIR" \
|
---|
| 4587 | "\n -F Force reset of context to match file_context for customizable files" \
|
---|
| 4588 | "\n -o FILE Save list of files with incorrect context" \
|
---|
| 4589 | "\n -s Take a list of files from stdin (instead of command line)" \
|
---|
| 4590 | "\n -v Show changes in file labels, if type or role are changing" \
|
---|
| 4591 | "\n -vv Show changes in file labels, if type, role, or user are changing" \
|
---|
| 4592 | "\n -W Display warnings about entries that had no matching files" \
|
---|
| 4593 |
|
---|
| 4594 | #define setfont_trivial_usage \
|
---|
| 4595 | "FONT [-m MAPFILE] [-C TTY]"
|
---|
| 4596 | #define setfont_full_usage "\n\n" \
|
---|
| 4597 | "Load a console font\n" \
|
---|
| 4598 | "\nOptions:" \
|
---|
| 4599 | "\n -m MAPFILE Load console screen map" \
|
---|
| 4600 | "\n -C TTY Affect TTY instead of /dev/tty" \
|
---|
| 4601 |
|
---|
| 4602 | #define setfont_example_usage \
|
---|
| 4603 | "$ setfont -m koi8-r /etc/i18n/fontname\n"
|
---|
| 4604 |
|
---|
| 4605 | #define setkeycodes_trivial_usage \
|
---|
| 4606 | "SCANCODE KEYCODE..."
|
---|
| 4607 | #define setkeycodes_full_usage "\n\n" \
|
---|
| 4608 | "Set entries into the kernel's scancode-to-keycode map,\n" \
|
---|
| 4609 | "allowing unusual keyboards to generate usable keycodes.\n\n" \
|
---|
| 4610 | "SCANCODE may be either xx or e0xx (hexadecimal),\n" \
|
---|
| 4611 | "and KEYCODE is given in decimal." \
|
---|
| 4612 |
|
---|
| 4613 | #define setkeycodes_example_usage \
|
---|
| 4614 | "$ setkeycodes e030 127\n"
|
---|
| 4615 |
|
---|
| 4616 | #define setlogcons_trivial_usage \
|
---|
| 4617 | "N"
|
---|
| 4618 | #define setlogcons_full_usage "\n\n" \
|
---|
| 4619 | "Redirect the kernel output to console N (0 for current)"
|
---|
| 4620 |
|
---|
| 4621 | #define setsebool_trivial_usage \
|
---|
| 4622 | "boolean value"
|
---|
| 4623 |
|
---|
| 4624 | #define setsebool_full_usage "\n\n" \
|
---|
| 4625 | "Change boolean setting"
|
---|
| 4626 |
|
---|
| 4627 | #define setsid_trivial_usage \
|
---|
| 4628 | "PROG ARGS"
|
---|
| 4629 | #define setsid_full_usage "\n\n" \
|
---|
| 4630 | "Run PROG in a new session. PROG will have no controlling terminal\n" \
|
---|
| 4631 | "and will not be affected by keyboard signals (Ctrl-C etc).\n" \
|
---|
| 4632 | "See setsid(2) for details." \
|
---|
| 4633 |
|
---|
| 4634 | #define last_trivial_usage \
|
---|
| 4635 | ""IF_FEATURE_LAST_FANCY("[-HW] [-f FILE]")
|
---|
| 4636 | #define last_full_usage "\n\n" \
|
---|
| 4637 | "Show listing of the last users that logged into the system" \
|
---|
| 4638 | IF_FEATURE_LAST_FANCY( "\n" \
|
---|
| 4639 | "\nOptions:" \
|
---|
| 4640 | /* "\n -H Show header line" */ \
|
---|
| 4641 | "\n -W Display with no host column truncation" \
|
---|
| 4642 | "\n -f FILE Read from FILE instead of /var/log/wtmp" \
|
---|
| 4643 | )
|
---|
| 4644 |
|
---|
| 4645 | #define showkey_trivial_usage \
|
---|
| 4646 | "[-a | -k | -s]"
|
---|
| 4647 | #define showkey_full_usage "\n\n" \
|
---|
| 4648 | "Show keys pressed\n" \
|
---|
| 4649 | "\nOptions:" \
|
---|
| 4650 | "\n -a Display decimal/octal/hex values of the keys" \
|
---|
| 4651 | "\n -k Display interpreted keycodes (default)" \
|
---|
| 4652 | "\n -s Display raw scan-codes" \
|
---|
| 4653 |
|
---|
| 4654 | #define slattach_trivial_usage \
|
---|
| 4655 | "[-cehmLF] [-s SPEED] [-p PROTOCOL] DEVICE"
|
---|
| 4656 | #define slattach_full_usage "\n\n" \
|
---|
| 4657 | "Attach network interface(s) to serial line(s)\n" \
|
---|
| 4658 | "\nOptions:" \
|
---|
| 4659 | "\n -p PROT Set protocol (slip, cslip, slip6, clisp6 or adaptive)" \
|
---|
| 4660 | "\n -s SPD Set line speed" \
|
---|
| 4661 | "\n -e Exit after initializing device" \
|
---|
| 4662 | "\n -h Exit when the carrier is lost" \
|
---|
| 4663 | "\n -c PROG Run PROG when the line is hung up" \
|
---|
| 4664 | "\n -m Do NOT initialize the line in raw 8 bits mode" \
|
---|
| 4665 | "\n -L Enable 3-wire operation" \
|
---|
| 4666 | "\n -F Disable RTS/CTS flow control" \
|
---|
| 4667 |
|
---|
| 4668 | #define sleep_trivial_usage \
|
---|
| 4669 | IF_FEATURE_FANCY_SLEEP("[") "N" IF_FEATURE_FANCY_SLEEP("]...")
|
---|
| 4670 | #define sleep_full_usage "\n\n" \
|
---|
| 4671 | IF_NOT_FEATURE_FANCY_SLEEP("Pause for N seconds") \
|
---|
| 4672 | IF_FEATURE_FANCY_SLEEP( \
|
---|
| 4673 | "Pause for a time equal to the total of the args given, where each arg can\n" \
|
---|
| 4674 | "have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays")
|
---|
| 4675 | #define sleep_example_usage \
|
---|
| 4676 | "$ sleep 2\n" \
|
---|
| 4677 | "[2 second delay results]\n" \
|
---|
| 4678 | IF_FEATURE_FANCY_SLEEP( \
|
---|
| 4679 | "$ sleep 1d 3h 22m 8s\n" \
|
---|
| 4680 | "[98528 second delay results]\n")
|
---|
| 4681 |
|
---|
| 4682 | #define sort_trivial_usage \
|
---|
| 4683 | "[-nru" \
|
---|
| 4684 | IF_FEATURE_SORT_BIG("gMcszbdfimSTokt] [-o FILE] [-k start[.offset][opts][,end[.offset][opts]] [-t CHAR") \
|
---|
| 4685 | "] [FILE]..."
|
---|
| 4686 | #define sort_full_usage "\n\n" \
|
---|
| 4687 | "Sort lines of text\n" \
|
---|
| 4688 | "\nOptions:" \
|
---|
| 4689 | IF_FEATURE_SORT_BIG( \
|
---|
| 4690 | "\n -b Ignore leading blanks" \
|
---|
| 4691 | "\n -c Check whether input is sorted" \
|
---|
| 4692 | "\n -d Dictionary order (blank or alphanumeric only)" \
|
---|
| 4693 | "\n -f Ignore case" \
|
---|
| 4694 | "\n -g General numerical sort" \
|
---|
| 4695 | "\n -i Ignore unprintable characters" \
|
---|
| 4696 | "\n -k Sort key" \
|
---|
| 4697 | "\n -M Sort month" \
|
---|
| 4698 | ) \
|
---|
| 4699 | "\n -n Sort numbers" \
|
---|
| 4700 | IF_FEATURE_SORT_BIG( \
|
---|
| 4701 | "\n -o Output to file" \
|
---|
| 4702 | "\n -k Sort by key" \
|
---|
| 4703 | "\n -t CHAR Key separator" \
|
---|
| 4704 | ) \
|
---|
| 4705 | "\n -r Reverse sort order" \
|
---|
| 4706 | IF_FEATURE_SORT_BIG( \
|
---|
| 4707 | "\n -s Stable (don't sort ties alphabetically)" \
|
---|
| 4708 | ) \
|
---|
| 4709 | "\n -u Suppress duplicate lines" \
|
---|
| 4710 | IF_FEATURE_SORT_BIG( \
|
---|
| 4711 | "\n -z Lines are terminated by NUL, not newline" \
|
---|
| 4712 | "\n -mST Ignored for GNU compatibility") \
|
---|
| 4713 |
|
---|
| 4714 | #define sort_example_usage \
|
---|
| 4715 | "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \
|
---|
| 4716 | "a\n" \
|
---|
| 4717 | "b\n" \
|
---|
| 4718 | "c\n" \
|
---|
| 4719 | "d\n" \
|
---|
| 4720 | "e\n" \
|
---|
| 4721 | "f\n" \
|
---|
| 4722 | IF_FEATURE_SORT_BIG( \
|
---|
| 4723 | "$ echo -e \"c 3\\nb 2\\nd 2\" | $SORT -k 2,2n -k 1,1r\n" \
|
---|
| 4724 | "d 2\n" \
|
---|
| 4725 | "b 2\n" \
|
---|
| 4726 | "c 3\n" \
|
---|
| 4727 | ) \
|
---|
| 4728 | ""
|
---|
| 4729 |
|
---|
| 4730 | #define split_trivial_usage \
|
---|
| 4731 | "[OPTIONS] [INPUT [PREFIX]]"
|
---|
| 4732 | #define split_full_usage "\n\n" \
|
---|
| 4733 | "Options:" \
|
---|
| 4734 | "\n -b N[k|m] Split by N (kilo|mega)bytes" \
|
---|
| 4735 | "\n -l N Split by N lines" \
|
---|
| 4736 | "\n -a N Use N letters as suffix" \
|
---|
| 4737 |
|
---|
| 4738 | #define split_example_usage \
|
---|
| 4739 | "$ split TODO foo\n" \
|
---|
| 4740 | "$ cat TODO | split -a 2 -l 2 TODO_\n"
|
---|
| 4741 |
|
---|
| 4742 | #define start_stop_daemon_trivial_usage \
|
---|
| 4743 | "[OPTIONS] [-S|-K] ... [-- ARGS...]"
|
---|
| 4744 | #define start_stop_daemon_full_usage "\n\n" \
|
---|
| 4745 | "Search for matching processes, and then\n" \
|
---|
| 4746 | "-K: stop all matching processes.\n" \
|
---|
| 4747 | "-S: start a process unless a matching process is found.\n" \
|
---|
| 4748 | IF_FEATURE_START_STOP_DAEMON_LONG_OPTIONS( \
|
---|
| 4749 | "\nProcess matching:" \
|
---|
| 4750 | "\n -u,--user USERNAME|UID Match only this user's processes" \
|
---|
| 4751 | "\n -n,--name NAME Match processes with NAME" \
|
---|
| 4752 | "\n in comm field in /proc/PID/stat" \
|
---|
| 4753 | "\n -x,--exec EXECUTABLE Match processes with this command" \
|
---|
| 4754 | "\n in /proc/PID/cmdline" \
|
---|
| 4755 | "\n -p,--pidfile FILE Match a process with PID from the file" \
|
---|
| 4756 | "\n All specified conditions must match" \
|
---|
| 4757 | "\n-S only:" \
|
---|
| 4758 | "\n -x,--exec EXECUTABLE Program to run" \
|
---|
| 4759 | "\n -a,--startas NAME Zeroth argument" \
|
---|
| 4760 | "\n -b,--background Background" \
|
---|
| 4761 | IF_FEATURE_START_STOP_DAEMON_FANCY( \
|
---|
| 4762 | "\n -N,--nicelevel N Change nice level" \
|
---|
| 4763 | ) \
|
---|
| 4764 | "\n -c,--chuid USER[:[GRP]] Change to user/group" \
|
---|
| 4765 | "\n -m,--make-pidfile Write PID to the pidfile specified by -p" \
|
---|
| 4766 | "\n-K only:" \
|
---|
| 4767 | "\n -s,--signal SIG Signal to send" \
|
---|
| 4768 | "\n -t,--test Match only, exit with 0 if a process is found" \
|
---|
| 4769 | "\nOther:" \
|
---|
| 4770 | IF_FEATURE_START_STOP_DAEMON_FANCY( \
|
---|
| 4771 | "\n -o,--oknodo Exit with status 0 if nothing is done" \
|
---|
| 4772 | "\n -v,--verbose Verbose" \
|
---|
| 4773 | ) \
|
---|
| 4774 | "\n -q,--quiet Quiet" \
|
---|
| 4775 | ) \
|
---|
| 4776 | IF_NOT_FEATURE_START_STOP_DAEMON_LONG_OPTIONS( \
|
---|
| 4777 | "\nProcess matching:" \
|
---|
| 4778 | "\n -u USERNAME|UID Match only this user's processes" \
|
---|
| 4779 | "\n -n NAME Match processes with NAME" \
|
---|
| 4780 | "\n in comm field in /proc/PID/stat" \
|
---|
| 4781 | "\n -x EXECUTABLE Match processes with this command" \
|
---|
| 4782 | "\n command in /proc/PID/cmdline" \
|
---|
| 4783 | "\n -p FILE Match a process with PID from the file" \
|
---|
| 4784 | "\n All specified conditions must match" \
|
---|
| 4785 | "\n-S only:" \
|
---|
| 4786 | "\n -x EXECUTABLE Program to run" \
|
---|
| 4787 | "\n -a NAME Zeroth argument" \
|
---|
| 4788 | "\n -b Background" \
|
---|
| 4789 | IF_FEATURE_START_STOP_DAEMON_FANCY( \
|
---|
| 4790 | "\n -N N Change nice level" \
|
---|
| 4791 | ) \
|
---|
| 4792 | "\n -c USER[:[GRP]] Change to user/group" \
|
---|
| 4793 | "\n -m Write PID to the pidfile specified by -p" \
|
---|
| 4794 | "\n-K only:" \
|
---|
| 4795 | "\n -s SIG Signal to send" \
|
---|
| 4796 | "\n -t Match only, exit with 0 if a process is found" \
|
---|
| 4797 | "\nOther:" \
|
---|
| 4798 | IF_FEATURE_START_STOP_DAEMON_FANCY( \
|
---|
| 4799 | "\n -o Exit with status 0 if nothing is done" \
|
---|
| 4800 | "\n -v Verbose" \
|
---|
| 4801 | ) \
|
---|
| 4802 | "\n -q Quiet" \
|
---|
| 4803 | ) \
|
---|
| 4804 |
|
---|
| 4805 | #define stat_trivial_usage \
|
---|
| 4806 | "[OPTIONS] FILE..."
|
---|
| 4807 | #define stat_full_usage "\n\n" \
|
---|
| 4808 | "Display file (default) or filesystem status\n" \
|
---|
| 4809 | "\nOptions:" \
|
---|
| 4810 | IF_FEATURE_STAT_FORMAT( \
|
---|
| 4811 | "\n -c fmt Use the specified format" \
|
---|
| 4812 | ) \
|
---|
| 4813 | "\n -f Display filesystem status" \
|
---|
| 4814 | "\n -L Follow links" \
|
---|
| 4815 | "\n -t Display info in terse form" \
|
---|
| 4816 | IF_SELINUX( \
|
---|
| 4817 | "\n -Z Print security context" \
|
---|
| 4818 | ) \
|
---|
| 4819 | IF_FEATURE_STAT_FORMAT( \
|
---|
| 4820 | "\n\nValid format sequences for files:\n" \
|
---|
| 4821 | " %a Access rights in octal\n" \
|
---|
| 4822 | " %A Access rights in human readable form\n" \
|
---|
| 4823 | " %b Number of blocks allocated (see %B)\n" \
|
---|
| 4824 | " %B The size in bytes of each block reported by %b\n" \
|
---|
| 4825 | " %d Device number in decimal\n" \
|
---|
| 4826 | " %D Device number in hex\n" \
|
---|
| 4827 | " %f Raw mode in hex\n" \
|
---|
| 4828 | " %F File type\n" \
|
---|
| 4829 | " %g Group ID of owner\n" \
|
---|
| 4830 | " %G Group name of owner\n" \
|
---|
| 4831 | " %h Number of hard links\n" \
|
---|
| 4832 | " %i Inode number\n" \
|
---|
| 4833 | " %n File name\n" \
|
---|
| 4834 | " %N File name, with -> TARGET if symlink\n" \
|
---|
| 4835 | " %o I/O block size\n" \
|
---|
| 4836 | " %s Total size, in bytes\n" \
|
---|
| 4837 | " %t Major device type in hex\n" \
|
---|
| 4838 | " %T Minor device type in hex\n" \
|
---|
| 4839 | " %u User ID of owner\n" \
|
---|
| 4840 | " %U User name of owner\n" \
|
---|
| 4841 | " %x Time of last access\n" \
|
---|
| 4842 | " %X Time of last access as seconds since Epoch\n" \
|
---|
| 4843 | " %y Time of last modification\n" \
|
---|
| 4844 | " %Y Time of last modification as seconds since Epoch\n" \
|
---|
| 4845 | " %z Time of last change\n" \
|
---|
| 4846 | " %Z Time of last change as seconds since Epoch\n" \
|
---|
| 4847 | "\nValid format sequences for file systems:\n" \
|
---|
| 4848 | " %a Free blocks available to non-superuser\n" \
|
---|
| 4849 | " %b Total data blocks in file system\n" \
|
---|
| 4850 | " %c Total file nodes in file system\n" \
|
---|
| 4851 | " %d Free file nodes in file system\n" \
|
---|
| 4852 | " %f Free blocks in file system\n" \
|
---|
| 4853 | IF_SELINUX( \
|
---|
| 4854 | " %C Security context in selinux\n" \
|
---|
| 4855 | ) \
|
---|
| 4856 | " %i File System ID in hex\n" \
|
---|
| 4857 | " %l Maximum length of filenames\n" \
|
---|
| 4858 | " %n File name\n" \
|
---|
| 4859 | " %s Block size (for faster transfer)\n" \
|
---|
| 4860 | " %S Fundamental block size (for block counts)\n" \
|
---|
| 4861 | " %t Type in hex\n" \
|
---|
| 4862 | " %T Type in human readable form" \
|
---|
| 4863 | ) \
|
---|
| 4864 |
|
---|
| 4865 | #define strings_trivial_usage \
|
---|
| 4866 | "[-afo] [-n LEN] [FILE]..."
|
---|
| 4867 | #define strings_full_usage "\n\n" \
|
---|
| 4868 | "Display printable strings in a binary file\n" \
|
---|
| 4869 | "\nOptions:" \
|
---|
| 4870 | "\n -a Scan whole file (default)" \
|
---|
| 4871 | "\n -f Precede strings with filenames" \
|
---|
| 4872 | "\n -n LEN At least LEN characters form a string (default 4)" \
|
---|
| 4873 | "\n -o Precede strings with decimal offsets" \
|
---|
| 4874 |
|
---|
| 4875 | #define stty_trivial_usage \
|
---|
| 4876 | "[-a|g] [-F DEVICE] [SETTING]..."
|
---|
| 4877 | #define stty_full_usage "\n\n" \
|
---|
| 4878 | "Without arguments, prints baud rate, line discipline,\n" \
|
---|
| 4879 | "and deviations from stty sane\n" \
|
---|
| 4880 | "\nOptions:" \
|
---|
| 4881 | "\n -F DEVICE Open device instead of stdin" \
|
---|
| 4882 | "\n -a Print all current settings in human-readable form" \
|
---|
| 4883 | "\n -g Print in stty-readable form" \
|
---|
| 4884 | "\n [SETTING] See manpage" \
|
---|
| 4885 |
|
---|
| 4886 | #define su_trivial_usage \
|
---|
| 4887 | "[OPTIONS] [-] [USERNAME]"
|
---|
| 4888 | #define su_full_usage "\n\n" \
|
---|
| 4889 | "Change user id or become root\n" \
|
---|
| 4890 | "\nOptions:" \
|
---|
| 4891 | "\n -p,-m Preserve environment" \
|
---|
| 4892 | "\n -c CMD Command to pass to 'sh -c'" \
|
---|
| 4893 | "\n -s SH Shell to use instead of default shell" \
|
---|
| 4894 |
|
---|
| 4895 | #define sulogin_trivial_usage \
|
---|
| 4896 | "[-t N] [TTY]"
|
---|
| 4897 | #define sulogin_full_usage "\n\n" \
|
---|
| 4898 | "Single user login\n" \
|
---|
| 4899 | "\nOptions:" \
|
---|
| 4900 | "\n -t N Timeout" \
|
---|
| 4901 |
|
---|
| 4902 | #define sum_trivial_usage \
|
---|
| 4903 | "[-rs] [FILE]..."
|
---|
| 4904 | #define sum_full_usage "\n\n" \
|
---|
| 4905 | "Checksum and count the blocks in a file\n" \
|
---|
| 4906 | "\nOptions:" \
|
---|
| 4907 | "\n -r Use BSD sum algorithm (1K blocks)" \
|
---|
| 4908 | "\n -s Use System V sum algorithm (512byte blocks)" \
|
---|
| 4909 |
|
---|
| 4910 | #define sv_trivial_usage \
|
---|
| 4911 | "[-v] [-w SEC] CMD SERVICE_DIR..."
|
---|
| 4912 | #define sv_full_usage "\n\n" \
|
---|
| 4913 | "Control services monitored by runsv supervisor.\n" \
|
---|
| 4914 | "Commands (only first character is enough):\n" \
|
---|
| 4915 | "\n" \
|
---|
| 4916 | "status: query service status\n" \
|
---|
| 4917 | "up: if service isn't running, start it. If service stops, restart it\n" \
|
---|
| 4918 | "once: like 'up', but if service stops, don't restart it\n" \
|
---|
| 4919 | "down: send TERM and CONT signals. If ./run exits, start ./finish\n" \
|
---|
| 4920 | " if it exists. After it stops, don't restart service\n" \
|
---|
| 4921 | "exit: send TERM and CONT signals to service and log service. If they exit,\n" \
|
---|
| 4922 | " runsv exits too\n" \
|
---|
| 4923 | "pause, cont, hup, alarm, interrupt, quit, 1, 2, term, kill: send\n" \
|
---|
| 4924 | "STOP, CONT, HUP, ALRM, INT, QUIT, USR1, USR2, TERM, KILL signal to service" \
|
---|
| 4925 |
|
---|
| 4926 | #define svlogd_trivial_usage \
|
---|
| 4927 | "[-ttv] [-r C] [-R CHARS] [-l MATCHLEN] [-b BUFLEN] DIR..."
|
---|
| 4928 | #define svlogd_full_usage "\n\n" \
|
---|
| 4929 | "Continuously read log data from stdin, optionally\n" \
|
---|
| 4930 | "filter log messages, and write the data to one or more automatically\n" \
|
---|
| 4931 | "rotated logs" \
|
---|
| 4932 |
|
---|
| 4933 | #define swapoff_trivial_usage \
|
---|
| 4934 | "[-a] [DEVICE]"
|
---|
| 4935 | #define swapoff_full_usage "\n\n" \
|
---|
| 4936 | "Stop swapping on DEVICE\n" \
|
---|
| 4937 | "\nOptions:" \
|
---|
| 4938 | "\n -a Stop swapping on all swap devices" \
|
---|
| 4939 |
|
---|
| 4940 | #define swapon_trivial_usage \
|
---|
| 4941 | "[-a]" IF_FEATURE_SWAPON_PRI(" [-p PRI]") " [DEVICE]"
|
---|
| 4942 | #define swapon_full_usage "\n\n" \
|
---|
| 4943 | "Start swapping on DEVICE\n" \
|
---|
| 4944 | "\nOptions:" \
|
---|
| 4945 | "\n -a Start swapping on all swap devices" \
|
---|
| 4946 | IF_FEATURE_SWAPON_PRI( \
|
---|
| 4947 | "\n -p PRI Set swap device priority" \
|
---|
| 4948 | ) \
|
---|
| 4949 |
|
---|
| 4950 | #define switch_root_trivial_usage \
|
---|
| 4951 | "[-c /dev/console] NEW_ROOT NEW_INIT [ARGS]"
|
---|
| 4952 | #define switch_root_full_usage "\n\n" \
|
---|
| 4953 | "Free initramfs and switch to another root fs:\n" \
|
---|
| 4954 | "chroot to NEW_ROOT, delete all in /, move NEW_ROOT to /,\n" \
|
---|
| 4955 | "execute NEW_INIT. PID must be 1. NEW_ROOT must be a mountpoint.\n" \
|
---|
| 4956 | "\nOptions:" \
|
---|
| 4957 | "\n -c DEV Reopen stdio to DEV after switch" \
|
---|
| 4958 |
|
---|
| 4959 | #define sync_trivial_usage \
|
---|
| 4960 | ""
|
---|
| 4961 | #define sync_full_usage "\n\n" \
|
---|
| 4962 | "Write all buffered blocks to disk"
|
---|
| 4963 |
|
---|
| 4964 | #define fsync_trivial_usage \
|
---|
| 4965 | "[-d] FILE..."
|
---|
| 4966 | #define fsync_full_usage "\n\n" \
|
---|
| 4967 | "Write files' buffered blocks to disk\n" \
|
---|
| 4968 | "\nOptions:" \
|
---|
| 4969 | "\n -d Avoid syncing metadata"
|
---|
| 4970 |
|
---|
| 4971 | #define sysctl_trivial_usage \
|
---|
| 4972 | "[OPTIONS] [VALUE]..."
|
---|
| 4973 | #define sysctl_full_usage "\n\n" \
|
---|
| 4974 | "Configure kernel parameters at runtime\n" \
|
---|
| 4975 | "\nOptions:" \
|
---|
| 4976 | "\n -n Don't print key names" \
|
---|
| 4977 | "\n -e Don't warn about unknown keys" \
|
---|
| 4978 | "\n -w Change sysctl setting" \
|
---|
| 4979 | "\n -p FILE Load sysctl settings from FILE (default /etc/sysctl.conf)" \
|
---|
| 4980 | "\n -a Display all values" \
|
---|
| 4981 | "\n -A Display all values in table form" \
|
---|
| 4982 |
|
---|
| 4983 | #define sysctl_example_usage \
|
---|
| 4984 | "sysctl [-n] [-e] variable...\n" \
|
---|
| 4985 | "sysctl [-n] [-e] -w variable=value...\n" \
|
---|
| 4986 | "sysctl [-n] [-e] -a\n" \
|
---|
| 4987 | "sysctl [-n] [-e] -p file (default /etc/sysctl.conf)\n" \
|
---|
| 4988 | "sysctl [-n] [-e] -A\n"
|
---|
| 4989 |
|
---|
| 4990 | #define syslogd_trivial_usage \
|
---|
| 4991 | "[OPTIONS]"
|
---|
| 4992 | #define syslogd_full_usage "\n\n" \
|
---|
| 4993 | "System logging utility.\n" \
|
---|
| 4994 | "This version of syslogd ignores /etc/syslog.conf\n" \
|
---|
| 4995 | "\nOptions:" \
|
---|
| 4996 | "\n -n Run in foreground" \
|
---|
| 4997 | "\n -O FILE Log to given file (default:/var/log/messages)" \
|
---|
| 4998 | "\n -l N Set local log level" \
|
---|
| 4999 | "\n -S Smaller logging output" \
|
---|
| 5000 | IF_FEATURE_ROTATE_LOGFILE( \
|
---|
| 5001 | "\n -s SIZE Max size (KB) before rotate (default:200KB, 0=off)" \
|
---|
| 5002 | "\n -b N N rotated logs to keep (default:1, max=99, 0=purge)") \
|
---|
| 5003 | IF_FEATURE_REMOTE_LOG( \
|
---|
| 5004 | "\n -R HOST[:PORT] Log to IP or hostname on PORT (default PORT=514/UDP)" \
|
---|
| 5005 | "\n -L Log locally and via network (default is network only if -R)") \
|
---|
| 5006 | IF_FEATURE_SYSLOGD_DUP( \
|
---|
| 5007 | "\n -D Drop duplicates") \
|
---|
| 5008 | IF_FEATURE_IPC_SYSLOG( \
|
---|
| 5009 | "\n -C[size(KiB)] Log to shared mem buffer (read it using logread)") \
|
---|
| 5010 | /* NB: -Csize shouldn't have space (because size is optional) */
|
---|
| 5011 | /* "\n -m MIN Minutes between MARK lines (default:20, 0=off)" */
|
---|
| 5012 |
|
---|
| 5013 | #define syslogd_example_usage \
|
---|
| 5014 | "$ syslogd -R masterlog:514\n" \
|
---|
| 5015 | "$ syslogd -R 192.168.1.1:601\n"
|
---|
| 5016 |
|
---|
| 5017 | #define tac_trivial_usage \
|
---|
| 5018 | "[FILE]..."
|
---|
| 5019 | #define tac_full_usage "\n\n" \
|
---|
| 5020 | "Concatenate FILEs and print them in reverse"
|
---|
| 5021 |
|
---|
| 5022 | #define taskset_trivial_usage \
|
---|
| 5023 | "[-p] [MASK] [PID | PROG ARGS]"
|
---|
| 5024 | #define taskset_full_usage "\n\n" \
|
---|
| 5025 | "Set or get CPU affinity\n" \
|
---|
| 5026 | "\nOptions:" \
|
---|
| 5027 | "\n -p Operate on an existing PID" \
|
---|
| 5028 |
|
---|
| 5029 | #define taskset_example_usage \
|
---|
| 5030 | "$ taskset 0x7 ./dgemm_test&\n" \
|
---|
| 5031 | "$ taskset -p 0x1 $!\n" \
|
---|
| 5032 | "pid 4790's current affinity mask: 7\n" \
|
---|
| 5033 | "pid 4790's new affinity mask: 1\n" \
|
---|
| 5034 | "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \
|
---|
| 5035 | "pid 6671's current affinity mask: 1\n" \
|
---|
| 5036 | "pid 6671's new affinity mask: 1\n" \
|
---|
| 5037 | "$ taskset -p 1\n" \
|
---|
| 5038 | "pid 1's current affinity mask: 3\n"
|
---|
| 5039 |
|
---|
| 5040 | #define tee_trivial_usage \
|
---|
| 5041 | "[-ai] [FILE]..."
|
---|
| 5042 | #define tee_full_usage "\n\n" \
|
---|
| 5043 | "Copy stdin to each FILE, and also to stdout\n" \
|
---|
| 5044 | "\nOptions:" \
|
---|
| 5045 | "\n -a Append to the given FILEs, don't overwrite" \
|
---|
| 5046 | "\n -i Ignore interrupt signals (SIGINT)" \
|
---|
| 5047 |
|
---|
| 5048 | #define tee_example_usage \
|
---|
| 5049 | "$ echo \"Hello\" | tee /tmp/foo\n" \
|
---|
| 5050 | "$ cat /tmp/foo\n" \
|
---|
| 5051 | "Hello\n"
|
---|
| 5052 |
|
---|
| 5053 | #if ENABLE_FEATURE_TELNET_AUTOLOGIN
|
---|
| 5054 | #define telnet_trivial_usage \
|
---|
| 5055 | "[-a] [-l USER] HOST [PORT]"
|
---|
| 5056 | #define telnet_full_usage "\n\n" \
|
---|
| 5057 | "Connect to telnet server\n" \
|
---|
| 5058 | "\nOptions:" \
|
---|
| 5059 | "\n -a Automatic login with $USER variable" \
|
---|
| 5060 | "\n -l USER Automatic login as USER" \
|
---|
| 5061 |
|
---|
| 5062 | #else
|
---|
| 5063 | #define telnet_trivial_usage \
|
---|
| 5064 | "HOST [PORT]"
|
---|
| 5065 | #define telnet_full_usage "\n\n" \
|
---|
| 5066 | "Connect to telnet server"
|
---|
| 5067 | #endif
|
---|
| 5068 |
|
---|
| 5069 | #define telnetd_trivial_usage \
|
---|
| 5070 | "[OPTIONS]"
|
---|
| 5071 | #define telnetd_full_usage "\n\n" \
|
---|
| 5072 | "Handle incoming telnet connections" \
|
---|
| 5073 | IF_NOT_FEATURE_TELNETD_STANDALONE(" via inetd") "\n" \
|
---|
| 5074 | "\nOptions:" \
|
---|
| 5075 | "\n -l LOGIN Exec LOGIN on connect" \
|
---|
| 5076 | "\n -f ISSUE_FILE Display ISSUE_FILE instead of /etc/issue" \
|
---|
| 5077 | "\n -K Close connection as soon as login exits" \
|
---|
| 5078 | "\n (normally wait until all programs close slave pty)" \
|
---|
| 5079 | IF_FEATURE_TELNETD_STANDALONE( \
|
---|
| 5080 | "\n -p PORT Port to listen on" \
|
---|
| 5081 | "\n -b ADDR[:PORT] Address to bind to" \
|
---|
| 5082 | "\n -F Run in foreground" \
|
---|
| 5083 | "\n -i Inetd mode" \
|
---|
| 5084 | IF_FEATURE_TELNETD_INETD_WAIT( \
|
---|
| 5085 | "\n -w SEC Inetd 'wait' mode, linger time SEC" \
|
---|
| 5086 | "\n -S Log to syslog (implied by -i or without -F and -w)" \
|
---|
| 5087 | ) \
|
---|
| 5088 | )
|
---|
| 5089 |
|
---|
| 5090 | /* "test --help" does not print help (POSIX compat), only "[ --help" does.
|
---|
| 5091 | * We display "<applet> EXPRESSION ]" here (not "<applet> EXPRESSION")
|
---|
| 5092 | * Unfortunately, it screws up generated BusyBox.html. TODO. */
|
---|
| 5093 | #define test_trivial_usage \
|
---|
| 5094 | "EXPRESSION ]"
|
---|
| 5095 | #define test_full_usage "\n\n" \
|
---|
| 5096 | "Check file types, compare values etc. Return a 0/1 exit code\n" \
|
---|
| 5097 | "depending on logical value of EXPRESSION"
|
---|
| 5098 | #define test_example_usage \
|
---|
| 5099 | "$ test 1 -eq 2\n" \
|
---|
| 5100 | "$ echo $?\n" \
|
---|
| 5101 | "1\n" \
|
---|
| 5102 | "$ test 1 -eq 1\n" \
|
---|
| 5103 | "$ echo $?\n" \
|
---|
| 5104 | "0\n" \
|
---|
| 5105 | "$ [ -d /etc ]\n" \
|
---|
| 5106 | "$ echo $?\n" \
|
---|
| 5107 | "0\n" \
|
---|
| 5108 | "$ [ -d /junk ]\n" \
|
---|
| 5109 | "$ echo $?\n" \
|
---|
| 5110 | "1\n"
|
---|
| 5111 |
|
---|
| 5112 | #define tc_trivial_usage \
|
---|
| 5113 | /*"[OPTIONS] "*/"OBJECT CMD [dev STRING]"
|
---|
| 5114 | #define tc_full_usage "\n\n" \
|
---|
| 5115 | "OBJECT: {qdisc|class|filter}\n" \
|
---|
| 5116 | "CMD: {add|del|change|replace|show}\n" \
|
---|
| 5117 | "\n" \
|
---|
| 5118 | "qdisc [ handle QHANDLE ] [ root |"IF_FEATURE_TC_INGRESS(" ingress |")" parent CLASSID ]\n" \
|
---|
| 5119 | /* "[ estimator INTERVAL TIME_CONSTANT ]\n" */ \
|
---|
| 5120 | " [ [ QDISC_KIND ] [ help | OPTIONS ] ]\n" \
|
---|
| 5121 | " QDISC_KIND := { [p|b]fifo | tbf | prio | cbq | red | etc. }\n" \
|
---|
| 5122 | "qdisc show [ dev STRING ]"IF_FEATURE_TC_INGRESS(" [ingress]")"\n" \
|
---|
| 5123 | "class [ classid CLASSID ] [ root | parent CLASSID ]\n" \
|
---|
| 5124 | " [ [ QDISC_KIND ] [ help | OPTIONS ] ]\n" \
|
---|
| 5125 | "class show [ dev STRING ] [ root | parent CLASSID ]\n" \
|
---|
| 5126 | "filter [ pref PRIO ] [ protocol PROTO ]\n" \
|
---|
| 5127 | /* "\t[ estimator INTERVAL TIME_CONSTANT ]\n" */ \
|
---|
| 5128 | " [ root | classid CLASSID ] [ handle FILTERID ]\n" \
|
---|
| 5129 | " [ [ FILTER_TYPE ] [ help | OPTIONS ] ]\n" \
|
---|
| 5130 | "filter show [ dev STRING ] [ root | parent CLASSID ]"
|
---|
| 5131 |
|
---|
| 5132 | #define tcpsvd_trivial_usage \
|
---|
| 5133 | "[-hEv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] IP PORT PROG"
|
---|
| 5134 | /* with not-implemented options: */
|
---|
| 5135 | /* "[-hpEvv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] [-i DIR|-x CDB] [-t SEC] IP PORT PROG" */
|
---|
| 5136 | #define tcpsvd_full_usage "\n\n" \
|
---|
| 5137 | "Create TCP socket, bind to IP:PORT and listen\n" \
|
---|
| 5138 | "for incoming connection. Run PROG for each connection.\n" \
|
---|
| 5139 | "\n IP IP to listen on. '0' = all" \
|
---|
| 5140 | "\n PORT Port to listen on" \
|
---|
| 5141 | "\n PROG ARGS Program to run" \
|
---|
| 5142 | "\n -l NAME Local hostname (else looks up local hostname in DNS)" \
|
---|
| 5143 | "\n -u USER[:GRP] Change to user/group after bind" \
|
---|
| 5144 | "\n -c N Handle up to N connections simultaneously" \
|
---|
| 5145 | "\n -b N Allow a backlog of approximately N TCP SYNs" \
|
---|
| 5146 | "\n -C N[:MSG] Allow only up to N connections from the same IP." \
|
---|
| 5147 | "\n New connections from this IP address are closed" \
|
---|
| 5148 | "\n immediately. MSG is written to the peer before close" \
|
---|
| 5149 | "\n -h Look up peer's hostname" \
|
---|
| 5150 | "\n -E Don't set up environment variables" \
|
---|
| 5151 | "\n -v Verbose" \
|
---|
| 5152 |
|
---|
| 5153 | #define udpsvd_trivial_usage \
|
---|
| 5154 | "[-hEv] [-c N] [-u USER] [-l NAME] IP PORT PROG"
|
---|
| 5155 | #define udpsvd_full_usage "\n\n" \
|
---|
| 5156 | "Create UDP socket, bind to IP:PORT and wait\n" \
|
---|
| 5157 | "for incoming packets. Run PROG for each packet,\n" \
|
---|
| 5158 | "redirecting all further packets with same peer ip:port to it.\n" \
|
---|
| 5159 | "\n IP IP to listen on. '0' = all" \
|
---|
| 5160 | "\n PORT Port to listen on" \
|
---|
| 5161 | "\n PROG ARGS Program to run" \
|
---|
| 5162 | "\n -l NAME Local hostname (else looks up local hostname in DNS)" \
|
---|
| 5163 | "\n -u USER[:GRP] Change to user/group after bind" \
|
---|
| 5164 | "\n -c N Handle up to N connections simultaneously" \
|
---|
| 5165 | "\n -h Look up peer's hostname" \
|
---|
| 5166 | "\n -E Don't set up environment variables" \
|
---|
| 5167 | "\n -v Verbose" \
|
---|
| 5168 |
|
---|
| 5169 | #define tftp_trivial_usage \
|
---|
| 5170 | "[OPTIONS] HOST [PORT]"
|
---|
| 5171 | #define tftp_full_usage "\n\n" \
|
---|
| 5172 | "Transfer a file from/to tftp server\n" \
|
---|
| 5173 | "\nOptions:" \
|
---|
| 5174 | "\n -l FILE Local FILE" \
|
---|
| 5175 | "\n -r FILE Remote FILE" \
|
---|
| 5176 | IF_FEATURE_TFTP_GET( \
|
---|
| 5177 | "\n -g Get file" \
|
---|
| 5178 | ) \
|
---|
| 5179 | IF_FEATURE_TFTP_PUT( \
|
---|
| 5180 | "\n -p Put file" \
|
---|
| 5181 | ) \
|
---|
| 5182 | IF_FEATURE_TFTP_BLOCKSIZE( \
|
---|
| 5183 | "\n -b SIZE Transfer blocks of SIZE octets" \
|
---|
| 5184 | )
|
---|
| 5185 |
|
---|
| 5186 | #define tftpd_trivial_usage \
|
---|
| 5187 | "[-cr] [-u USER] [DIR]"
|
---|
| 5188 | #define tftpd_full_usage "\n\n" \
|
---|
| 5189 | "Transfer a file on tftp client's request\n" \
|
---|
| 5190 | "\n" \
|
---|
| 5191 | "tftpd should be used as an inetd service.\n" \
|
---|
| 5192 | "tftpd's line for inetd.conf:\n" \
|
---|
| 5193 | " 69 dgram udp nowait root tftpd tftpd /files/to/serve\n" \
|
---|
| 5194 | "It also can be ran from udpsvd:\n" \
|
---|
| 5195 | " udpsvd -vE 0.0.0.0 69 tftpd /files/to/serve\n" \
|
---|
| 5196 | "\nOptions:" \
|
---|
| 5197 | "\n -r Prohibit upload" \
|
---|
| 5198 | "\n -c Allow file creation via upload" \
|
---|
| 5199 | "\n -u Access files as USER" \
|
---|
| 5200 |
|
---|
| 5201 | #define time_trivial_usage \
|
---|
| 5202 | "[-v] PROG ARGS"
|
---|
| 5203 | #define time_full_usage "\n\n" \
|
---|
| 5204 | "Run PROG, display resource usage when it exits\n" \
|
---|
| 5205 | "\nOptions:" \
|
---|
| 5206 | "\n -v Verbose" \
|
---|
| 5207 |
|
---|
| 5208 | #define timeout_trivial_usage \
|
---|
| 5209 | "[-t SECS] [-s SIG] PROG ARGS"
|
---|
| 5210 | #define timeout_full_usage "\n\n" \
|
---|
| 5211 | "Runs PROG. Sends SIG to it if it is not gone in SECS seconds.\n" \
|
---|
| 5212 | "Defaults: SECS: 10, SIG: TERM." \
|
---|
| 5213 |
|
---|
| 5214 | #define top_trivial_usage \
|
---|
| 5215 | "[-b] [-nCOUNT] [-dSECONDS]" IF_FEATURE_TOPMEM(" [-m]")
|
---|
| 5216 | #define top_full_usage "\n\n" \
|
---|
| 5217 | "Provide a view of process activity in real time.\n" \
|
---|
| 5218 | "Read the status of all processes from /proc each SECONDS\n" \
|
---|
| 5219 | "and display a screenful of them." \
|
---|
| 5220 | //TODO: add options and keyboard commands
|
---|
| 5221 |
|
---|
| 5222 | #define touch_trivial_usage \
|
---|
| 5223 | "[-c] [-d DATE] [-r FILE] FILE [FILE]..."
|
---|
| 5224 | #define touch_full_usage "\n\n" \
|
---|
| 5225 | "Update the last-modified date on the given FILE[s]\n" \
|
---|
| 5226 | "\nOptions:" \
|
---|
| 5227 | "\n -c Don't create files" \
|
---|
| 5228 | "\n -d DT Date/time to use" \
|
---|
| 5229 | "\n -r FILE Use FILE's date/time" \
|
---|
| 5230 |
|
---|
| 5231 | #define touch_example_usage \
|
---|
| 5232 | "$ ls -l /tmp/foo\n" \
|
---|
| 5233 | "/bin/ls: /tmp/foo: No such file or directory\n" \
|
---|
| 5234 | "$ touch /tmp/foo\n" \
|
---|
| 5235 | "$ ls -l /tmp/foo\n" \
|
---|
| 5236 | "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n"
|
---|
| 5237 |
|
---|
| 5238 | #define tr_trivial_usage \
|
---|
| 5239 | "[-cds] STRING1 [STRING2]"
|
---|
| 5240 | #define tr_full_usage "\n\n" \
|
---|
| 5241 | "Translate, squeeze, or delete characters from stdin, writing to stdout\n" \
|
---|
| 5242 | "\nOptions:" \
|
---|
| 5243 | "\n -c Take complement of STRING1" \
|
---|
| 5244 | "\n -d Delete input characters coded STRING1" \
|
---|
| 5245 | "\n -s Squeeze multiple output characters of STRING2 into one character" \
|
---|
| 5246 |
|
---|
| 5247 | #define tr_example_usage \
|
---|
| 5248 | "$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \
|
---|
| 5249 | "hello world\n"
|
---|
| 5250 |
|
---|
| 5251 | #define traceroute_trivial_usage \
|
---|
| 5252 | "[-"IF_TRACEROUTE6("46")"FIldnrv] [-f 1ST_TTL] [-m MAXTTL] [-p PORT] [-q PROBES]\n" \
|
---|
| 5253 | " [-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-g GATEWAY] [-i IFACE]\n" \
|
---|
| 5254 | " [-z PAUSE_MSEC] HOST [BYTES]"
|
---|
| 5255 | #define traceroute_full_usage "\n\n" \
|
---|
| 5256 | "Trace the route to HOST\n" \
|
---|
| 5257 | "\nOptions:" \
|
---|
| 5258 | IF_TRACEROUTE6( \
|
---|
| 5259 | "\n -4,-6 Force IP or IPv6 name resolution" \
|
---|
| 5260 | ) \
|
---|
| 5261 | "\n -F Set the don't fragment bit" \
|
---|
| 5262 | "\n -I Use ICMP ECHO instead of UDP datagrams" \
|
---|
| 5263 | "\n -l Display the TTL value of the returned packet" \
|
---|
| 5264 | "\n -d Set SO_DEBUG options to socket" \
|
---|
| 5265 | "\n -n Print numeric addresses" \
|
---|
| 5266 | "\n -r Bypass routing tables, send directly to HOST" \
|
---|
| 5267 | "\n -v Verbose" \
|
---|
| 5268 | "\n -m Max time-to-live (max number of hops)" \
|
---|
| 5269 | "\n -p Base UDP port number used in probes" \
|
---|
| 5270 | "\n (default 33434)" \
|
---|
| 5271 | "\n -q Number of probes per TTL (default 3)" \
|
---|
| 5272 | "\n -s IP address to use as the source address" \
|
---|
| 5273 | "\n -t Type-of-service in probe packets (default 0)" \
|
---|
| 5274 | "\n -w Time in seconds to wait for a response (default 3)" \
|
---|
| 5275 | "\n -g Loose source route gateway (8 max)" \
|
---|
| 5276 |
|
---|
| 5277 | #define traceroute6_trivial_usage \
|
---|
| 5278 | "[-dnrv] [-m MAXTTL] [-p PORT] [-q PROBES]\n" \
|
---|
| 5279 | " [-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-i IFACE]\n" \
|
---|
| 5280 | " HOST [BYTES]"
|
---|
| 5281 | #define traceroute6_full_usage "\n\n" \
|
---|
| 5282 | "Trace the route to HOST\n" \
|
---|
| 5283 | "\nOptions:" \
|
---|
| 5284 | "\n -d Set SO_DEBUG options to socket" \
|
---|
| 5285 | "\n -n Print numeric addresses" \
|
---|
| 5286 | "\n -r Bypass routing tables, send directly to HOST" \
|
---|
| 5287 | "\n -v Verbose" \
|
---|
| 5288 | "\n -m Max time-to-live (max number of hops)" \
|
---|
| 5289 | "\n -p Base UDP port number used in probes" \
|
---|
| 5290 | "\n (default is 33434)" \
|
---|
| 5291 | "\n -q Number of probes per TTL (default 3)" \
|
---|
| 5292 | "\n -s IP address to use as the source address" \
|
---|
| 5293 | "\n -t Type-of-service in probe packets (default 0)" \
|
---|
| 5294 | "\n -w Time in seconds to wait for a response (default 3)" \
|
---|
| 5295 |
|
---|
| 5296 | #define true_trivial_usage \
|
---|
| 5297 | ""
|
---|
| 5298 | #define true_full_usage "\n\n" \
|
---|
| 5299 | "Return an exit code of TRUE (0)"
|
---|
| 5300 | #define true_example_usage \
|
---|
| 5301 | "$ true\n" \
|
---|
| 5302 | "$ echo $?\n" \
|
---|
| 5303 | "0\n"
|
---|
| 5304 |
|
---|
| 5305 | #define tty_trivial_usage \
|
---|
| 5306 | ""
|
---|
| 5307 | #define tty_full_usage "\n\n" \
|
---|
| 5308 | "Print file name of stdin's terminal" \
|
---|
| 5309 | IF_INCLUDE_SUSv2( "\n" \
|
---|
| 5310 | "\nOptions:" \
|
---|
| 5311 | "\n -s Print nothing, only return exit status" \
|
---|
| 5312 | )
|
---|
| 5313 | #define tty_example_usage \
|
---|
| 5314 | "$ tty\n" \
|
---|
| 5315 | "/dev/tty2\n"
|
---|
| 5316 |
|
---|
| 5317 | #define ttysize_trivial_usage \
|
---|
| 5318 | "[w] [h]"
|
---|
| 5319 | #define ttysize_full_usage "\n\n" \
|
---|
| 5320 | "Print dimension(s) of stdin's terminal, on error return 80x25"
|
---|
| 5321 |
|
---|
| 5322 | #define tunctl_trivial_usage \
|
---|
| 5323 | "[-f device] ([-t name] | -d name)" IF_FEATURE_TUNCTL_UG(" [-u owner] [-g group] [-b]")
|
---|
| 5324 | #define tunctl_full_usage "\n\n" \
|
---|
| 5325 | "Create or delete tun interfaces\n" \
|
---|
| 5326 | "\nOptions:" \
|
---|
| 5327 | "\n -f name tun device (/dev/net/tun)" \
|
---|
| 5328 | "\n -t name Create iface 'name'" \
|
---|
| 5329 | "\n -d name Delete iface 'name'" \
|
---|
| 5330 | IF_FEATURE_TUNCTL_UG( \
|
---|
| 5331 | "\n -u owner Set iface owner" \
|
---|
| 5332 | "\n -g group Set iface group" \
|
---|
| 5333 | "\n -b Brief output" \
|
---|
| 5334 | )
|
---|
| 5335 | #define tunctl_example_usage \
|
---|
| 5336 | "# tunctl\n" \
|
---|
| 5337 | "# tunctl -d tun0\n"
|
---|
| 5338 |
|
---|
| 5339 | #define udhcpd_trivial_usage \
|
---|
| 5340 | "[-fS]" IF_FEATURE_UDHCP_PORT(" [-P N]") " [CONFFILE]" \
|
---|
| 5341 |
|
---|
| 5342 | #define udhcpd_full_usage "\n\n" \
|
---|
| 5343 | "DHCP server\n" \
|
---|
| 5344 | "\n -f Run in foreground" \
|
---|
| 5345 | "\n -S Log to syslog too" \
|
---|
| 5346 | IF_FEATURE_UDHCP_PORT( \
|
---|
| 5347 | "\n -P N Use port N (default 67)" \
|
---|
| 5348 | )
|
---|
| 5349 |
|
---|
| 5350 | #define umount_trivial_usage \
|
---|
| 5351 | "[OPTIONS] FILESYSTEM|DIRECTORY"
|
---|
| 5352 | #define umount_full_usage "\n\n" \
|
---|
| 5353 | "Unmount file systems\n" \
|
---|
| 5354 | "\nOptions:" \
|
---|
| 5355 | IF_FEATURE_UMOUNT_ALL( \
|
---|
| 5356 | "\n -a Unmount all file systems" IF_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \
|
---|
| 5357 | ) \
|
---|
| 5358 | IF_FEATURE_MTAB_SUPPORT( \
|
---|
| 5359 | "\n -n Don't erase /etc/mtab entries" \
|
---|
| 5360 | ) \
|
---|
| 5361 | "\n -r Try to remount devices as read-only if mount is busy" \
|
---|
| 5362 | "\n -l Lazy umount (detach filesystem)" \
|
---|
| 5363 | "\n -f Force umount (i.e., unreachable NFS server)" \
|
---|
| 5364 | IF_FEATURE_MOUNT_LOOP( \
|
---|
| 5365 | "\n -d Free loop device if it has been used" \
|
---|
| 5366 | )
|
---|
| 5367 |
|
---|
| 5368 | #define umount_example_usage \
|
---|
| 5369 | "$ umount /dev/hdc1\n"
|
---|
| 5370 |
|
---|
| 5371 | #define uname_trivial_usage \
|
---|
| 5372 | "[-amnrspv]"
|
---|
| 5373 | #define uname_full_usage "\n\n" \
|
---|
| 5374 | "Print system information\n" \
|
---|
| 5375 | "\nOptions:" \
|
---|
| 5376 | "\n -a Print all" \
|
---|
| 5377 | "\n -m The machine (hardware) type" \
|
---|
| 5378 | "\n -n Hostname" \
|
---|
| 5379 | "\n -r OS release" \
|
---|
| 5380 | "\n -s OS name (default)" \
|
---|
| 5381 | "\n -p Processor type" \
|
---|
| 5382 | "\n -v OS version" \
|
---|
| 5383 |
|
---|
| 5384 | #define uname_example_usage \
|
---|
| 5385 | "$ uname -a\n" \
|
---|
| 5386 | "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
|
---|
| 5387 |
|
---|
| 5388 | #define uncompress_trivial_usage \
|
---|
| 5389 | "[-cf] [FILE]..."
|
---|
| 5390 | #define uncompress_full_usage "\n\n" \
|
---|
| 5391 | "Decompress .Z file[s]\n" \
|
---|
| 5392 | "\nOptions:" \
|
---|
| 5393 | "\n -c Write to stdout" \
|
---|
| 5394 | "\n -f Overwrite" \
|
---|
| 5395 |
|
---|
| 5396 | #define unexpand_trivial_usage \
|
---|
| 5397 | "[-fa][-t N] [FILE]..."
|
---|
| 5398 | #define unexpand_full_usage "\n\n" \
|
---|
| 5399 | "Convert spaces to tabs, writing to stdout\n" \
|
---|
| 5400 | "\nOptions:" \
|
---|
| 5401 | IF_FEATURE_UNEXPAND_LONG_OPTIONS( \
|
---|
| 5402 | "\n -a,--all Convert all blanks" \
|
---|
| 5403 | "\n -f,--first-only Convert only leading blanks" \
|
---|
| 5404 | "\n -t,--tabs=N Tabstops every N chars" \
|
---|
| 5405 | ) \
|
---|
| 5406 | IF_NOT_FEATURE_UNEXPAND_LONG_OPTIONS( \
|
---|
| 5407 | "\n -a Convert all blanks" \
|
---|
| 5408 | "\n -f Convert only leading blanks" \
|
---|
| 5409 | "\n -t N Tabstops every N chars" \
|
---|
| 5410 | )
|
---|
| 5411 |
|
---|
| 5412 | #define uniq_trivial_usage \
|
---|
| 5413 | "[-cdu][-f,s,w N] [INPUT [OUTPUT]]"
|
---|
| 5414 | #define uniq_full_usage "\n\n" \
|
---|
| 5415 | "Discard duplicate lines\n" \
|
---|
| 5416 | "\nOptions:" \
|
---|
| 5417 | "\n -c Prefix lines by the number of occurrences" \
|
---|
| 5418 | "\n -d Only print duplicate lines" \
|
---|
| 5419 | "\n -u Only print unique lines" \
|
---|
| 5420 | "\n -f N Skip first N fields" \
|
---|
| 5421 | "\n -s N Skip first N chars (after any skipped fields)" \
|
---|
| 5422 | "\n -w N Compare N characters in line" \
|
---|
| 5423 |
|
---|
| 5424 | #define uniq_example_usage \
|
---|
| 5425 | "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \
|
---|
| 5426 | "a\n" \
|
---|
| 5427 | "b\n" \
|
---|
| 5428 | "c\n"
|
---|
| 5429 |
|
---|
| 5430 | #define unzip_trivial_usage \
|
---|
| 5431 | "[-opts[modifiers]] FILE[.zip] [LIST] [-x XLIST] [-d DIR]"
|
---|
| 5432 | #define unzip_full_usage "\n\n" \
|
---|
| 5433 | "Extract files from ZIP archives\n" \
|
---|
| 5434 | "\nOptions:" \
|
---|
| 5435 | "\n -l List archive contents (with -q for short form)" \
|
---|
| 5436 | "\n -n Never overwrite files (default)" \
|
---|
| 5437 | "\n -o Overwrite" \
|
---|
| 5438 | "\n -p Send output to stdout" \
|
---|
| 5439 | "\n -q Quiet" \
|
---|
| 5440 | "\n -x XLST Exclude these files" \
|
---|
| 5441 | "\n -d DIR Extract files into DIR" \
|
---|
| 5442 |
|
---|
| 5443 | #define uptime_trivial_usage \
|
---|
| 5444 | ""
|
---|
| 5445 | #define uptime_full_usage "\n\n" \
|
---|
| 5446 | "Display the time since the last boot"
|
---|
| 5447 |
|
---|
| 5448 | #define uptime_example_usage \
|
---|
| 5449 | "$ uptime\n" \
|
---|
| 5450 | " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n"
|
---|
| 5451 |
|
---|
| 5452 | #define usleep_trivial_usage \
|
---|
| 5453 | "N"
|
---|
| 5454 | #define usleep_full_usage "\n\n" \
|
---|
| 5455 | "Pause for N microseconds"
|
---|
| 5456 |
|
---|
| 5457 | #define usleep_example_usage \
|
---|
| 5458 | "$ usleep 1000000\n" \
|
---|
| 5459 | "[pauses for 1 second]\n"
|
---|
| 5460 |
|
---|
| 5461 | #define uudecode_trivial_usage \
|
---|
| 5462 | "[-o OUTFILE] [INFILE]"
|
---|
| 5463 | #define uudecode_full_usage "\n\n" \
|
---|
| 5464 | "Uudecode a file\n" \
|
---|
| 5465 | "Finds outfile name in uuencoded source unless -o is given"
|
---|
| 5466 |
|
---|
| 5467 | #define uudecode_example_usage \
|
---|
| 5468 | "$ uudecode -o busybox busybox.uu\n" \
|
---|
| 5469 | "$ ls -l busybox\n" \
|
---|
| 5470 | "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n"
|
---|
| 5471 |
|
---|
| 5472 | #define uuencode_trivial_usage \
|
---|
| 5473 | "[-m] [INFILE] STORED_FILENAME"
|
---|
| 5474 | #define uuencode_full_usage "\n\n" \
|
---|
| 5475 | "Uuencode a file to stdout\n" \
|
---|
| 5476 | "\nOptions:" \
|
---|
| 5477 | "\n -m Use base64 encoding per RFC1521" \
|
---|
| 5478 |
|
---|
| 5479 | #define uuencode_example_usage \
|
---|
| 5480 | "$ uuencode busybox busybox\n" \
|
---|
| 5481 | "begin 755 busybox\n" \
|
---|
| 5482 | "<encoded file snipped>\n" \
|
---|
| 5483 | "$ uudecode busybox busybox > busybox.uu\n" \
|
---|
| 5484 | "$\n"
|
---|
| 5485 |
|
---|
| 5486 | #define vconfig_trivial_usage \
|
---|
| 5487 | "COMMAND [OPTIONS]"
|
---|
| 5488 | #define vconfig_full_usage "\n\n" \
|
---|
| 5489 | "Create and remove virtual ethernet devices\n" \
|
---|
| 5490 | "\nOptions:" \
|
---|
| 5491 | "\n add [interface-name] [vlan_id]" \
|
---|
| 5492 | "\n rem [vlan-name]" \
|
---|
| 5493 | "\n set_flag [interface-name] [flag-num] [0 | 1]" \
|
---|
| 5494 | "\n set_egress_map [vlan-name] [skb_priority] [vlan_qos]" \
|
---|
| 5495 | "\n set_ingress_map [vlan-name] [skb_priority] [vlan_qos]" \
|
---|
| 5496 | "\n set_name_type [name-type]" \
|
---|
| 5497 |
|
---|
| 5498 | #define vi_trivial_usage \
|
---|
| 5499 | "[OPTIONS] [FILE]..."
|
---|
| 5500 | #define vi_full_usage "\n\n" \
|
---|
| 5501 | "Edit FILE\n" \
|
---|
| 5502 | "\nOptions:" \
|
---|
| 5503 | IF_FEATURE_VI_COLON( \
|
---|
| 5504 | "\n -c Initial command to run ($EXINIT also available)" \
|
---|
| 5505 | ) \
|
---|
| 5506 | IF_FEATURE_VI_READONLY( \
|
---|
| 5507 | "\n -R Read-only" \
|
---|
| 5508 | ) \
|
---|
| 5509 | "\n -H Short help regarding available features" \
|
---|
| 5510 |
|
---|
| 5511 | #define vlock_trivial_usage \
|
---|
| 5512 | "[-a]"
|
---|
| 5513 | #define vlock_full_usage "\n\n" \
|
---|
| 5514 | "Lock a virtual terminal. A password is required to unlock.\n" \
|
---|
| 5515 | "\nOptions:" \
|
---|
| 5516 | "\n -a Lock all VTs" \
|
---|
| 5517 |
|
---|
| 5518 | #define volname_trivial_usage \
|
---|
| 5519 | "[DEVICE]"
|
---|
| 5520 | #define volname_full_usage "\n\n" \
|
---|
| 5521 | "Show CD volume name of the DEVICE (default /dev/cdrom)"
|
---|
| 5522 |
|
---|
| 5523 | #define wall_trivial_usage \
|
---|
| 5524 | "[FILE]"
|
---|
| 5525 | #define wall_full_usage "\n\n" \
|
---|
| 5526 | "Write content of FILE or stdin to all logged-in users"
|
---|
| 5527 | #define wall_sample_usage \
|
---|
| 5528 | "echo foo | wall\n" \
|
---|
| 5529 | "wall ./mymessage"
|
---|
| 5530 |
|
---|
| 5531 | #define watch_trivial_usage \
|
---|
| 5532 | "[-n SEC] [-t] PROG ARGS"
|
---|
| 5533 | #define watch_full_usage "\n\n" \
|
---|
| 5534 | "Run PROG periodically\n" \
|
---|
| 5535 | "\nOptions:" \
|
---|
| 5536 | "\n -n Loop period in seconds (default 2)" \
|
---|
| 5537 | "\n -t Don't print header" \
|
---|
| 5538 |
|
---|
| 5539 | #define watch_example_usage \
|
---|
| 5540 | "$ watch date\n" \
|
---|
| 5541 | "Mon Dec 17 10:31:40 GMT 2000\n" \
|
---|
| 5542 | "Mon Dec 17 10:31:42 GMT 2000\n" \
|
---|
| 5543 | "Mon Dec 17 10:31:44 GMT 2000"
|
---|
| 5544 |
|
---|
| 5545 | #define watchdog_trivial_usage \
|
---|
| 5546 | "[-t N[ms]] [-T N[ms]] [-F] DEV"
|
---|
| 5547 | #define watchdog_full_usage "\n\n" \
|
---|
| 5548 | "Periodically write to watchdog device DEV\n" \
|
---|
| 5549 | "\nOptions:" \
|
---|
| 5550 | "\n -T N Reboot after N seconds if not reset (default 60)" \
|
---|
| 5551 | "\n -t N Reset every N seconds (default 30)" \
|
---|
| 5552 | "\n -F Run in foreground" \
|
---|
| 5553 | "\n" \
|
---|
| 5554 | "\nUse 500ms to specify period in milliseconds" \
|
---|
| 5555 |
|
---|
| 5556 | #define wget_trivial_usage \
|
---|
| 5557 | IF_FEATURE_WGET_LONG_OPTIONS( \
|
---|
| 5558 | "[-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document FILE]\n" \
|
---|
| 5559 | " [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \
|
---|
| 5560 | " [--no-check-certificate] [-U|--user-agent AGENT]" \
|
---|
| 5561 | IF_FEATURE_WGET_TIMEOUT("[-T SEC] ") " URL" \
|
---|
| 5562 | ) \
|
---|
| 5563 | IF_NOT_FEATURE_WGET_LONG_OPTIONS( \
|
---|
| 5564 | "[-csq] [-O FILE] [-Y on/off] [-P DIR] [-U AGENT]" \
|
---|
| 5565 | IF_FEATURE_WGET_TIMEOUT("[-T SEC] ") " URL" \
|
---|
| 5566 | )
|
---|
| 5567 | #define wget_full_usage "\n\n" \
|
---|
| 5568 | "Retrieve files via HTTP or FTP\n" \
|
---|
| 5569 | "\nOptions:" \
|
---|
| 5570 | "\n -s Spider mode - only check file existence" \
|
---|
| 5571 | "\n -c Continue retrieval of aborted transfer" \
|
---|
| 5572 | "\n -q Quiet" \
|
---|
| 5573 | "\n -P DIR Save to DIR (default .)" \
|
---|
| 5574 | IF_FEATURE_WGET_TIMEOUT( \
|
---|
| 5575 | "\n -T SEC Network read timeout is SEC seconds" \
|
---|
| 5576 | ) \
|
---|
| 5577 | "\n -O FILE Save to FILE ('-' for stdout)" \
|
---|
| 5578 | "\n -U STR Use STR for User-Agent header" \
|
---|
| 5579 | "\n -Y Use proxy ('on' or 'off')" \
|
---|
| 5580 |
|
---|
| 5581 | #define which_trivial_usage \
|
---|
| 5582 | "[COMMAND]..."
|
---|
| 5583 | #define which_full_usage "\n\n" \
|
---|
| 5584 | "Locate a COMMAND"
|
---|
| 5585 | #define which_example_usage \
|
---|
| 5586 | "$ which login\n" \
|
---|
| 5587 | "/bin/login\n"
|
---|
| 5588 |
|
---|
| 5589 | #define who_trivial_usage \
|
---|
| 5590 | "[-a]"
|
---|
| 5591 | #define who_full_usage "\n\n" \
|
---|
| 5592 | "Show who is logged on\n" \
|
---|
| 5593 | "\nOptions:" \
|
---|
| 5594 | "\n -a Show all" \
|
---|
| 5595 |
|
---|
| 5596 | #define whoami_trivial_usage \
|
---|
| 5597 | ""
|
---|
| 5598 | #define whoami_full_usage "\n\n" \
|
---|
| 5599 | "Print the user name associated with the current effective user id"
|
---|
| 5600 |
|
---|
| 5601 | #define zcat_trivial_usage \
|
---|
| 5602 | "FILE"
|
---|
| 5603 | #define zcat_full_usage "\n\n" \
|
---|
| 5604 | "Decompress to stdout"
|
---|
| 5605 |
|
---|
| 5606 | #define zcip_trivial_usage \
|
---|
| 5607 | "[OPTIONS] IFACE SCRIPT"
|
---|
| 5608 | #define zcip_full_usage "\n\n" \
|
---|
| 5609 | "Manage a ZeroConf IPv4 link-local address\n" \
|
---|
| 5610 | "\nOptions:" \
|
---|
| 5611 | "\n -f Run in foreground" \
|
---|
| 5612 | "\n -q Quit after obtaining address" \
|
---|
| 5613 | "\n -r 169.254.x.x Request this address first" \
|
---|
| 5614 | "\n -v Verbose" \
|
---|
| 5615 | "\n" \
|
---|
| 5616 | "\nWith no -q, runs continuously monitoring for ARP conflicts," \
|
---|
| 5617 | "\nexits only on I/O errors (link down etc)" \
|
---|
| 5618 |
|
---|
| 5619 |
|
---|
| 5620 | #endif
|
---|