Context Navigation

source: MondoRescue/branches/2.2.8/mindi/mindi @ 2058

Last change on this file since 2058 was 2058, checked in by Bruno Cornec, 12 years ago
small optimisation sort \| uniq => sort -u
Property svn:keywords set to `Rev Id`
File size: 100.8 KB

Line
1	#!/bin/bash
2
3	# $Id: mindi 2058 2008-10-27 13:17:39Z bruno $
4	#
5	#-----------------------------------------------------------------------------
6	# mindi - mini-Linux distro based on the user's filesystem & distribution
7	#
8	# Mindi can create a multi-image boot/root kit. The first image is the boot
9	# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10	# the third disk is data disk #2; and so it goes.
11	#
12	# See http://www.mondorescue.org for details.
13	#-----------------------------------------------------------------------------
14
15	### Which arch are we on (useful for ia64 port)
16	ARCH=`/bin/uname -m`
17
18	ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off"
19
20	MINDI_REV=PBREV
21	MINDI_VER=PBVER
22
23	MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
24	MINDI_PREFIX=XXX
25	MINDI_CONF=YYY
26	MINDI_SBIN=${MINDI_PREFIX}/sbin
27	MINDI_LIB=LLL
28
29	# Temporary directory for mindi
30	TMPDIR=/tmp
31
32	EXTRA_SPACE=49152 # increase if you run out of ramdisk space
33	BOOT_SIZE=16384 # size of the boot disk
34
35	PROMPT_MAKE_CD_IMAGE="yes"
36	# Ask if you want to make a CD Image to be written?
37	# if this is set to 'no', then the image will be created automatically
38
39	PROMPT_MAKE_USB_IMAGE="yes"
40	# Ask if you want to make a USB Image to be written?
41	# if this is set to 'no', then the image will be created automatically
42
43	USE_OWN_KERNEL="yes"
44	# If set to "no", you will be prompted for whether or not
45	# you want to use your own kernel, or the supplied default.
46	# If "yes" mindi will automatically use your own kernel.
47
48	MY_FSTAB=/etc/fstab
49	TAPE_MODS="ht st osst ide-tape ide_tape"
50	SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi isp megaraid megaraid_mm megaraid_mbox megaraid_sas mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qla2xxx_conf qlogicfas qlogicfc qlogicisp raw1394 scsi_debug scsi_mod scsi_transport_sas scsi_transport_spi sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule"
51
52	# ide-probe-mod
53	IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs ide-core ide_core edd paride ata_generic ata_piix libata dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_amd pata_marvell pata_serverworks pata_sis amd74xx sis5513"
54	PCMCIA_MODS="pcmcia_core ds yenta_socket"
55	USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_storage input hid uhci_hcd ehci_hcd uhci-hcd ehci-hcd ohci-hcd ohci_hcd usbkbd usbhid keybdev mousedev libusual scsi_mod"
56	NET_MODS="sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 bnx2 e1000 eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmnet exportfs"
57	CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660"
58	# Those modules will only go on the backup media, not the boot media.
59	EXTRA_MODS="$CDROM_MODS vfat fat loop md-mod linear raid0 raid1 xor raid5 raid456 lvm-mod dm-mod dm_mod dm-snapshot dm_snapshot dm-zero dm_zero dm-mirror dm_mirror dm-multipath dm_multipath dm-round-robin dm_round_robin jfs xfs xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache"
60	# Replace with that line for HP OCMP e.g.
61	#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu"
62	DENY_MODS="kqemu"
63	# Force some modules to be included
64	FORCE_MODS=""
65
66	LOGFILE=/var/log/mindi.log
67	MINDI_CACHE=/var/cache/mindi
68	BOOT_MEDIA_MESSAGE="\
69	To format and restore all files automatically, type 'nuke' <enter>.\n\
70	To restore some/all files interactively, type 'interactive' <enter>.\n\
71	To compare the archives with your filesystem, type 'compare' <enter>.\n\
72	To boot to a command-line prompt (expert mode), type 'expert' <enter>.\n\
73	You may add one or more of the following parameters as well:-\n\n\
74	donteject - mondorestore will not eject the CD; this is useful if, for\n\
75	instance, your PC's case has a concealed CD-ROM drive\n\
76	noresize - your mountlist will not be adjusted to use your unallocated\n\
77	hard disk space\n\
78	textonly - do not call any Newt library routines; this is unattractive\n\
79	but valuable if you find your Newt library has bugs in it\n\n\
80	e.g. Type 'nuke donteject textonly' if you have an unstable Newt library and \n\
81	a PC whose CD-ROM drive tray would be damaged if it unexpectedly ejected.\n\
82	"
83	FDISK=$MINDI_SBIN/parted2fdisk
84
85	# Using a config file allow to overwrite some values
86	MINDI_CONFIG="$MINDI_CONF/mindi.conf"
87	if [ -f $MINDI_CONFIG ]; then
88	. $MINDI_CONFIG
89	fi
90	DEPLIST_FILE="$MINDI_CONF/deplist.txt"
91	ISO_CMD="/usr/bin/mkisofs"
92	ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
93
94	# Now we can create what we need
95	export MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
96
97	# ----------------------------------------------------------------------------
98
99
100	AbortHere() {
101	[ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
102	Die "Program is terminating in response to signal received from OS/user"
103	}
104
105
106	Aborted() {
107	trap SIGHUP SIGTERM SIGTRAP SIGINT
108	[ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindiimg $MINDI_CACHE/gz $MINDI_CACHE/mindi.iso
109	[ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
110	Die "User abort."
111	}
112
113
114	AddFileToCfgIfExists() {
115	[ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
116	}
117
118
119	AddKeyboardMappingFile() {
120	local mappath r included_list included_item i res ii sss
121	mappath=$1
122	KBDEPTH=$(($KBDEPTH+1))
123	[ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
124	if [ -e "$bigdir/$mappath" ] ; then
125	echo "$mappath already added" >> $LOGFILE
126	return
127	elif [ -d "$bigdir/$mappath" ] ; then
128	echo "Cannot add $mappath: it's a directory. Sorry."
129	return
130	fi
131	echo "Added kbd map $mappath" >> $LOGFILE
132	if [ ! -e "$mappath" ] ; then
133	mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
134	if [ ! -e "$mappath" ] ; then
135	LogIt "Cannot add $mappath: kbd map file not found"
136	return
137	fi
138	else
139	echo -en "`basename $mappath \| tr '.' '#' \| sed s/#kmap#gz// \| sed s/#inc#gz//` " \| tr '#' '.'
140	fi
141
142	mkdir -p $bigdir/etc
143	tar cf - $mappath 2>> /dev/null \| (cd $bigdir ; tar xf -) \|\| LogIt "AKMF -- Could not copy $mappath to $bigdir"
144	if [ "`echo $mappath \| grep -F ".gz"`" ] ; then
145	included_list=`gzip -dc $mappath \| grep -Fi include \| sed s/'"'// \| sed s/'"'// \| cut -d' ' -f2`
146	else
147	included_list=`grep -Fi include $mappath \| sed s/'"'// \| sed s/'"'// \| cut -d' ' -f2`
148	fi
149	for included_item in $included_list ; do
150	if [ ! -e "$included_item" ] ; then
151	sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
152	[ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
153	for ii in $sss ; do
154	[ -e "$ii" ] && AddKeyboardMappingFile $ii
155	done
156	else
157	AddKeyboardMappingFile $included_item
158	fi
159	done
160	}
161
162
163	CopyDependenciesToDirectory() {
164	local outdir incoming fname counter d found
165	outdir=$1
166	mkdir -p $outdir
167	incoming=`ReadLine`
168	counter=0
169	while [ "$incoming" != "" ] ; do
170	# Non absolute file names should not arrive till here => skipped
171	if [ `echo "$incoming" \| cut -c1` != '/' ]; then
172	LogIt "Unable to handle $incoming"
173	incoming=`ReadLine`
174	continue
175	fi
176	# no parent directory of incoming should be a link, copy is not possible in that case
177	d=`dirname "$incoming"`
178	found="false"
179	while [ $d != "/" -a $found = "false" ]; do
180	[ -h "$d" ] && found="true"
181	d=`dirname "$d"`
182	done
183	if [ -d "$incoming" ] && [ ! -h "$incoming" ]; then
184	find $incoming/* -maxdepth 0 2> /dev/null \| CopyDependenciesToDirectory $outdir
185	elif [ -e "$incoming" ] && [ $found = "false" ]; then
186	tar cf - $incoming 2> /dev/null \| (cd $outdir ; tar xf -) \|\| Die "Cannot copy $incoming to $outdir - did you run out of disk space?"
187
188	# Only uncompress modules if not using udevd
189	if [ "`echo "$incoming" \| grep "lib/modules/.\..o\.gz"`" != "" ] && [ "`ps auxww \| grep -v grep \| grep -qw udevd`" != "" ]; then
190	gunzip -f $outdir/$incoming \|\| LogIt "Cannot gunzip $outdir/$incoming"
191	fi
192	[ -x "$outdir" ] && StripExecutable $outdir "-$filename-"
193	counter=$(($counter+1))
194	if [ "$counter" -ge "5" ] ; then
195	counter=0
196	echo -en "."
197	fi
198	fi
199	incoming=`ReadLine`
200	done
201	}
202
203
204	CountItemsIn() {
205	local r
206	r=0
207	for q in $1 ; do
208	r=$(($r+1))
209	done
210	echo $r
211	}
212
213
214	# Last function called before exiting
215	# Parameter is exit code value
216	MindiExit() {
217	local my_partitions
218
219	echo "Mindi $MINDI_VERSION is exiting" >> $LOGFILE
220	echo "End date : `date`" >> $LOGFILE
221	if [ _"$MONDO_SHARE" != _"" ] ; then
222	echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
223	cat $LOGFILE >> /var/log/mondoarchive.log
224	echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
225	fi
226
227	cd /
228	sync&
229
230	# Unmount what could remain mounted
231	my_partitions=`mount \| grep -F $$ \| cut -f1 -d' '`
232	[ "$my_partitions" != "" ] && umount $my_partitions
233	# Clean temporary files only when standalone mindi
234	if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
235	rm -Rf $MINDI_TMP
236	fi
237	exit $1
238	}
239
240	Die() {
241	local i
242	if [ "$1" = "" ] ; then
243	LogIt "FATAL ERROR"
244	else
245	LogIt "FATAL ERROR. $1"
246	fi
247
248	LogIt "Please e-mail a copy of $LOGFILE to the mailing list."
249	LogIt "See http://www.mondorescue.org for more information."
250	LogIt "WE CANNOT HELP unless you enclose that file.\n"
251	MindiExit -1
252	}
253
254
255	DropOptimizedLibraries() {
256	local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
257	filelist=$1
258	outdir=$2
259
260	list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
261	if [ "$list_of_optimized_libraries" = "" ] ; then
262	return 0
263	fi
264	echo -en "Dropping i686-optimized libraries if appropriate"
265	for optimized_lib_name in $list_of_optimized_libraries ; do
266	echo -en "."
267	reason=""
268	vanilla_lib_name=`echo "$optimized_lib_name" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
269	echo "$vanilla_lib_name" >> $filelist
270	resolved=$vanilla_lib_name
271	echo "Adding $resolved to filelist" >> $LOGFILE
272	resolved=`ReadAllLink $resolved`
273	echo "Adding $resolved to filelist" >> $LOGFILE
274	mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
275	rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
276	ln -sf $vanilla_lib_name $outdir$optimized_lib_name
277	echo "Excluding $optimized_lib_name" >> $LOGFILE
278	grep -Fvx "$optimized_lib_name" "$filelist" > $filelist.tmp
279	echo "Replacing it with $vanilla_lib_name" >> $LOGFILE
280	echo "$vanilla_lib_name" >> $filelist.tmp
281	mv -f $filelist.tmp $filelist
282	done
283	$AWK '{ print $1; }' $filelist \| sort -u > $filelist.tmp
284	mv -f $filelist.tmp $filelist
285	echo -e "$DONE"
286	}
287
288
289	FindAndAddUserKeyboardMappingFile() {
290	local r res mapfile mappath included_item included_list keyfile mp locale
291	LogIt "Analyzing your keyboard's configuration."
292	KEYDIR=/lib/kbd
293	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
294	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
295	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
296	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
297	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
298	if [ ! -e "$KEYDIR" ] ; then
299	LogIt "Keyboard mapping directory not found. I shall use default map at boot-time."
300	return 0
301	fi
302	if [ -e "/etc/sysconfig/keyboard" ] ; then
303	echo "Red Hat-style config detected." >> $LOGFILE
304	keyfile=/etc/sysconfig/keyboard
305	elif [ -e "/etc/rc.d/rc.keymap" ] ; then
306	echo "Slackware-style config detected." >> $LOGFILE
307	keyfile=/etc/rc.d/rc.keymap
308	elif [ -e "/etc/rc.config" ] ; then
309	echo "Debian-style config detected." >> $LOGFILE
310	keyfile=/etc/rc.config
311	elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
312	echo "Debian-style config detected." >> $LOGFILE
313	echo -en "Adding the following keyboard mapping tables: "
314	mkdir -p $bigdir/tmp
315	echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
316	KBDEPTH=0
317	mkdir -p $bigdir/etc/console
318	cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
319	echo -e "$DONE"
320	return 0
321	elif [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
322	echo "Ubuntu-style config detected." >> $LOGFILE
323	echo -en "Adding the following keyboard mapping tables: "
324	mkdir -p $bigdir/tmp
325	echo "/etc/console-setup/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
326	KBDEPTH=0
327	mkdir -p $bigdir/etc/console-setup
328	cp /etc/console-setup/boottime.kmap.gz $bigdir/etc/console-setup 2>> $LOGFILE
329	echo -e "$DONE"
330	return 0
331	elif [ -e "/etc/conf.d/keymaps" ] ; then
332	echo "Gentoo-style config detected." >> $LOGFILE
333	keyfile=/etc/conf.d/keymaps
334	else
335	echo -en "Searching for rc.config ..."
336	keyfile=`find /etc -name rc.config \| head -n1`
337	if [ "$keyfile" = "" ] \|\| [ ! -e "$keyfile" ] ; then
338	LogIt "Unknown config detected. Default keyboard map will be used."
339	return
340	else
341	echo "Found $keyfile" >> $LOGFILE
342	fi
343	fi
344	if [ ! -e "$KEYDIR/keymaps" ] ; then
345	LogIt "Keyboard mapping directory not found. Default keyboard map will be used."
346	return
347	fi
348	echo "keyfile=$keyfile" >> $LOGFILE
349	locale=`grep -F KEYTABLE "$keyfile" \| tr -d '"' \|cut -d'=' -f2`
350	[ ! "$locale" ] && locale=`grep '.map$' "$keyfile" \| sed 's/^.* //'` # Slackware
351	[ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" \| tr -d '"' \|cut -d'=' -f2` # Gentoo
352	echo "locale=$locale" >> $LOGFILE
353	#
354	# Process the keymaps dir once for all
355	# AddKeyboardMappingFile will use it recursively
356	#
357	find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
358	mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep -F "/${locale}." \| grep -vx " #."`
359	[ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
360	# If we have multiple keymaps then log it !!
361	echo "$mp" \| grep -q " "
362	if [ $? -eq 0 ]; then
363	echo "WARNING: Multiple keymaps found: $mp" \| tee -a $LOGFILE
364	echo "The following one will be used" >> $LOGFILE
365	fi
366	for i in $mp ; do
367	mappath=$i
368	[ -e "$i" ] && [ ! -d "$i" ] && break
369	done
370	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
371	mappath=$(find / -name "/kbd/keymaps//$locale")
372	fi
373	echo "mappath = $mappath" >> $LOGFILE
374	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
375	LogIt "Keyboard mapping file not found. Default keyboard map will be used."
376	return
377	fi
378	echo -en "Adding the following keyboard mapping tables: "
379	mkdir -p $bigdir/tmp
380	echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
381	KBDEPTH=0
382	AddKeyboardMappingFile $mappath
383	echo -e "$DONE"
384	rm -f $MINDI_TMP/keymaps.find
385	return 0
386	}
387
388
389	FindIsolinuxBinary() {
390	ISOLINUX=/usr/lib/isolinux.bin
391	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
392	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
393	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
394	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
395	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
396	[ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin \| grep -x "/.*/isolinux.bin"`
397	[ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.com and click on 'Download'"
398	echo "Found isolinux.bin at $ISOLINUX" >> $LOGFILE
399	}
400
401
402	FindSpecificModuleInPath() {
403	local modpaths pwd line
404	pwd=`pwd`
405	if [ "$YOUR_KERNEL_SUCKS" ] ; then
406	cd $MINDI_TMP
407	else
408	cd /
409	fi
410	if [ ! -e "$1" ] ; then
411	LogIt "WARNING - cannot search specific path '$1'"
412	return 1
413	fi
414	modpaths=`find $1 -name $2.*o -type f`
415	#[ "$?" -ne "0" ] && Die "find $1 -name $2.o -type f --- failed"
416	[ "$modpaths" = "" ] && modpaths=`find $1 -name $2.o.gz -type f`
417	[ "$modpaths" = "" ] && modpaths=`find $1 -name $2.ko.gz -type f`
418	[ "$modpaths" = "" ] && modpaths=`find $1 -name $2 -type f`
419	echo "$modpaths"
420	cd $pwd
421	}
422
423
424	GenerateGiantDependencyList() {
425	local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
426
427	echo -en "Analyzing dependency requirements"
428	outfile=$1
429	tempfile=$MINDI_TMP/$$.txt
430	incoming=`ReadLine`
431
432	> $tempfile
433	progress=0
434	res=0
435	noof_lines=$2
436	while [ "$incoming" != "" ] ; do
437	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
438	incoming=`ReadLine`
439	continue
440	fi
441	if [ "$incoming" = "LVMFILES:" ] ; then
442	break
443	fi
444	filelist=`GenerateListForFile "$incoming"`
445	r=$?
446	[ "$r" -ne "0" ] && LogIt "$incoming not found"
447	res=$(($res+$r))
448	# echo "'$incoming' generates filelist '$filelist'" >> $LOGFILE
449	for fname in $filelist ; do
450	[ "$fname" != "" ] && echo "$fname" >> $tempfile
451	done
452	progress=$(($progress+1))
453	echo -en "\r\t\t\t\t\t\t\t\t"
454	i=$(($progress*100))
455	i=$(($i/$noof_lines))
456	echo -en "$i"
457	echo -en "%"
458	modres=$(($progress%4))
459	[ "$modres" -eq "0" ] && echo -en "\t/"
460	[ "$modres" -eq "1" ] && echo -en "\t-"
461	[ "$modres" -eq "2" ] && echo -en "\t\\"
462	[ "$modres" -eq "3" ] && echo -en "\t\|"
463	incoming=`ReadLine`
464	done
465	if [ "$incoming" = "LVMFILES:" ] ; then
466	incoming=`ReadLine`
467	lvmversion=""
468	while [ "$incoming" != "" ] ; do
469	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
470	incoming=`ReadLine`
471	continue
472	fi
473	filelist=`GenerateListForFile "$incoming"`
474	for tool in $filelist ; do
475	lvmresolved=`readlink -f $tool`
476	if [ "$tool" = "$lvmresolved" ]; then
477	echo "$tool" >> $tempfile
478	elif echo "$lvmresolved" \| grep "lvmiopversion" &> /dev/null ; then
479	if [ "$lvmversion" = "" ] ; then
480	lvmversion=`$lvmresolved`
481	echo "$lvmresolved" >> $tempfile
482	fi
483	toolstripped=`echo $tool \| $AWK -F / '{print $NF;}'`
484	if [ "$lvmversion" = "200" ]; then
485	# pvdata and lvmcreate_initrd don't exist in LVM2
486	case "$toolstripped" in
487	"pvdata")
488	continue
489	;;
490	"lvmcreate_initrd")
491	continue
492	;;
493	esac
494	fi
495	toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
496	if [ -e "$toolpath" ] ; then
497	echo "$toolpath" >> $tempfile
498	echo "$tool" >> $tempfile
499	else
500	toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
501	fi
502	if [ -e "$toolpath" ] ; then
503	echo "$toolpath" >> $tempfile
504	echo "$tool" >> $tempfile
505	else
506	echo "Where are your LVM-Tools? Couldn't find $tool"
507	fi
508	else
509	echo "$tool" >> $tempfile
510	fi
511	done
512	progress=$(($progress+1))
513	echo -en "\r\t\t\t\t\t\t\t\t"
514	i=$(($progress*100))
515	i=$(($i/$noof_lines))
516	echo -en "$i"
517	echo -en "%"
518	modres=$(($progress%4))
519	[ "$modres" -eq "0" ] && echo -en "\t/"
520	[ "$modres" -eq "1" ] && echo -en "\t-"
521	[ "$modres" -eq "2" ] && echo -en "\t\\"
522	[ "$modres" -eq "3" ] && echo -en "\t\|"
523	incoming=`ReadLine`
524	done
525	fi
526	echo -en "$DONE\nMaking complete dependency list"
527
528	tr -s '/' '/' < $tempfile \| sort -u > $tempfile.new
529	mv -f $tempfile.new $tempfile
530	> $outfile.pre
531	progress=0
532	noof_lines=`cat $tempfile \| wc -l`
533	echo "---------------------------------" >> $LOGFILE
534	echo "List of dependencies: " >> $LOGFILE
535	echo "---------------------------------" >> $LOGFILE
536	for fname in `cat $tempfile` ; do
537	echo "$fname" \| tee -a $LOGFILE >> $outfile.pre
538	LocateDeps $fname \| tee -a $LOGFILE >> $outfile.pre
539	progress=$(($progress+1))
540	echo -en "\r\t\t\t\t\t\t\t\t"
541	i=$(($progress*100))
542	i=$(($i/$noof_lines))
543	echo -en "$i"
544	echo -en "%"
545	modres=$(($progress%4))
546	[ "$modres" -eq "0" ] && echo -en "\t/"
547	[ "$modres" -eq "1" ] && echo -en "\t-"
548	[ "$modres" -eq "2" ] && echo -en "\t\\"
549	[ "$modres" -eq "3" ] && echo -en "\t\|"
550	done
551	if [ _"$MONDO_SHARE" != _"" ]; then
552	mkdir -p $bigdir/tmp
553	mkdir -p $bigdir/sbin
554	mkdir -p $bigdir/bin
555	if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
556	LogIt "\nIncorporating post-nuke tarball"
557	old_pwd=`pwd`
558	cd $bigdir
559	tar -zxf $MINDI_TMP/post-nuke.tgz \|\| LogIt "Error occurred when untarring post-nuke tarball"
560	cd $old_pwd
561	fi
562	if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
563	LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
564	else
565	LogIt "Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
566	LogIt "I bet you've got a spare copy of Mondo or Mindi floating around on your system."
567	LogIt "If Mindi was called by Mondo then send me a bug report.\n It not, type 'ps ax' to see which Mondo-related process is still running;\n then kill it. :-)\n Finally, run Mindi again."
568	Die "Odd."
569	fi
570	cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2> /dev/null \|\| LogIt "\nMondo v1.2x defaults to LILO as the bootloader, BTW."
571	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
572	LogIt "\nIncorporating NFS-related settings"
573	for r in NFS-* ISO-PREFIX ; do
574	cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE \|\| Die "Cannot copy $r - did you run out of disk space?"
575	echo "Copying $r to ramdisk" >> $LOGFILE
576	done
577	fi
578	fi
579	tr ' ' '\n' < $outfile.pre \| tr -s '/' '/' \| grep -Fvx "" \| sort -u \| grep -Ev "/libX11\|/libXext\|/libXi\|/libgtk\|/libgdk" > $outfile
580	rm -f $tempfile $outfile.pre
581	[ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" \|\| echo "\nFailed."
582	return $res
583	}
584
585
586	GenerateListForFile() {
587	local files_found loc fname incoming i res
588	incoming="$1"
589	files_found=""
590	res=0
591
592	for fname in $incoming ; do
593	files_found="$files_found `LocateFile $fname`"
594	done
595
596	echo "$files_found" \| tr ' ' '\n' \| sort -u \| tr '\n' ' '
597	}
598
599
600	# Returns all disk devices which are part of a raid array
601	GetAllRaidMembers() {
602	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]device/ if(\$2) {print \$2}" < /etc/raidtab
603	}
604
605
606	GetFileSizeList() {
607	local i
608	for i in `find $1 -type d -o -print` ; do
609	du -sk $i
610	done
611	}
612
613
614	GetHomeDir() {
615	local res loc
616	loc=`which $1 2>/dev/null`
617	res=`file $loc \| $AWK '{print $NF;}'`
618	dirname $res
619	}
620
621
622	# Check kernel filesystem capabilites for accessing initrd image
623	#
624	# Interface definition:
625	# param #1: absolute path to kernel image
626	GetInitrdFilesystemToUse() {
627
628	# interface test: make sure we have one parameter
629	if [ $# -ne 1 ]; then
630	Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
631	fi
632
633	# interface parameters
634	local lvKernelImage=$1
635
636	# local constants (filesystem magic strings)
637	local lcMagicCramfs="<3>cramfs: wrong magic"
638	local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
639	local lcMagicInitfs="<6>checking if image is initramfs...\|<6>Unpacking initramfs..."
640
641	# local variables
642	local lvOffset
643	local lvScanRes
644	local lvUseFilesystem
645
646	# say where we are.
647	echo " GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage.\n" >> $LOGFILE
648
649	# verify that file exists
650	[ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
651
652	# Kernel may be gzip compressed
653	file $lvKernelImage 2>&1 \| grep -q gzip
654	if [ $? -eq 0 ]; then
655	lvScanRes=`gzip -cd $lvKernelImage \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicInitfs"`
656	else
657	# get offet of gzip magic "1f8b0800" in file
658	lvOffset=`od -vA n -t x1 $lvKernelImage \| tr -d '[:space:]' \| awk '{ print match($0, "1f8b0800")}'`
659	[ $lvOffset -eq 0 ] && Die "gzip magic not found in file $lvKernelImage. Terminating."
660	lvOffset=`expr $lvOffset / 2`
661	echo " GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset.\n" >> $LOGFILE
662
663	# scan kernel image for initrd filessystem support
664	lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicInitfs"`
665	fi
666
667	# determine which filesystem to use for initrd image: ext2fs, gzip'ed cpio (initramfs ) or cramfs
668	if [ `echo $lvScanRes \| grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
669	lvUseFilesystem="ext2fs"
670	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
671	lvUseFilesystem="initramfs"
672	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
673	lvUseFilesystem="cramfs"
674	else
675	lvUseFilesystem="UNSUPPORTED"
676	fi
677
678	# say what we are using
679	echo " GetInitrdFilesystemToUse(): Filesytem to use for initrd is $lvUseFilesystem.\n" >> $LOGFILE
680
681	# return file system to use
682	echo "$lvUseFilesystem"
683
684	}
685
686	# Searches parent raid device of given disk device
687	# $1: disk device (i.e. /dev/hda1)
688	GetParentRaidDev() {
689	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {dev=\$2} /^[[:space:]]*device/ {if(\$2==\"$1\") {print dev; exit}}" < /etc/raidtab
690	}
691
692
693	# Searches members of raid device
694	# $1: raid device (/dev/md...)
695	GetRaidDevMembers() {
696	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
697	}
698
699
700	HackPathsToFailsafe() {
701	local incoming newpath kver stub i pwd
702	kver=`uname -r`
703	incoming=`ReadLine`
704	pwd=`pwd`
705	cd $MINDI_TMP
706	while [ "$incoming" != "" ] ; do
707	stub=`basename $incoming`
708	newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
709	for i in $newpath ; do
710	echo "$i"
711	done
712	read incoming
713	done
714	cd $pwd
715	}
716
717
718	ListAllPartitions() {
719	local res currline partition all_partitions ap_orig remaining i j
720
721	grep -Evx " #.\| none." $MY_FSTAB \| $AWK '/^\/dev\/[imhs]d\|\|^LABEL=\/\|^UUID=/ && !/fdd\|cdr\|zip\|floppy/ {print $1}'
722	[ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
723	if [ -e "/vmfs/volumes" ]; then
724	# For VMWare ESX 3 get the device names of these volumes
725	vdf -P \| grep -E '/vmfs/volumes' \| awk '{print $1}'
726	fi
727	return
728	}
729
730
731	ListImagesForUser() {
732	local path fname
733	path=$MINDI_CACHE
734	echo -en "In the directory '$path' you will find the images:-\n"
735	for fname in `ls $path \| grep -F mindi-` ; do
736	printf "%19s " $fname
737	done
738	echo " "
739	}
740
741
742	ListKernelModulePaths() {
743	local module_list module fname oss r kern
744	oss="/root/oss/modules"
745	module_list="$MODULES"
746	# Remove unwanted modules from list
747	for i in $DENY_MODS; do
748	module_list=`echo ${module_list} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
749	EXTRA_MODS=`echo ${EXTRA_MODS} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
750	done
751	###
752	### Sq-Modification ... Use kernelname for module search path if specified
753	###
754	# kern="`uname -r`"
755	if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
756	then
757	kern=${kernelname}
758	else
759	kern="`uname -r`"
760	fi
761	###
762	### Sq-Mod End
763	###
764	for module in $module_list $EXTRA_MODS ; do
765	r=`find /lib/modules/$kern -type f \| grep "/${module}\..*o" \| tail -n1`
766	echo "module $module --> $r" >> $LOGFILE
767	[ "$r" ] && echo "$r"
768	[ -f "$oss" ] && find $oss \| grep -F $module
769	done
770	find /lib/modules/$kern/modules.* -type f 2> /dev/null
771	[ -f "$oss" ] && find $oss.* 2> /dev/null
772	}
773
774	#
775	# Critical function which computes all dependencies (dyn. lib.)
776	# for a list of binaries
777	#
778	LocateDeps() {
779	local incoming fname deps
780	incoming="$*"
781	for fname in $incoming ; do
782	if [ ! -e "$fname" ] ; then
783	echo "WARNING - $fname does not exist; cannot be LDD'd." >> $LOGFILE
784	if echo $fname \| grep lvm &> /dev/null ; then
785	echo "This warning only affects you if you are using LVM." >> $LOGFILE
786	if echo "$MODULES" \| grep lvm &> /dev/null ; then
787	echo "I think you are, so please take heed!" >> $LOGFILE
788	else
789	echo "I don't think you are, so don't worry about it." >> $LOGFILE
790	fi
791	fi
792	elif [ -h "$fname" ] && [ -x "$fname" ] ; then
793	echo "$fname is softlink" >> $LOGFILE
794	else
795	ldd $fname 2> /dev/null \| ProcessLDD
796	fi
797	done
798	}
799
800
801	# Give all symlinks recursively of a full path name
802	ReadAllLink() {
803	file="$1"
804
805	echo "$file"
806	if [ ! -h $file ]; then
807	return 0
808	fi
809
810	link=`readlink $file`
811	d=`dirname $file`
812	fchar=`echo $link \| cut -c1`
813	# If mother dir is a link print it
814	if [ -h "$d" ]; then
815	echo "$d"
816	d=`readlink $d`
817	fi
818	if [ "$fchar" != "/" ]; then
819	# Relative or local link
820	ReadAllLink "$d/$link"
821	else
822	# Absolute path
823	ReadAllLink $link
824	fi
825	}
826
827
828	LocateFile() {
829	local i path fname_to_find location output resolved tmp stub cache_id loclist
830	fname_to_find="$1"
831	# It's an absolute path
832	if echo "$fname_to_find" \| grep -x "/.*" ; then
833	output="$fname_to_find"
834	if [ -h "$output" ] ; then
835	output="`ReadAllLink $output` $output"
836	fi
837	echo "$output"
838	return 0
839	fi
840	# It's not an absolute path
841	output=""
842	for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
843	#for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
844	[ -h "$path" ] && continue
845	[ ! -e "$path/$fname_to_find" ] && continue
846	output="$path/$fname_to_find $output"
847	if [ -h "$path/$fname_to_find" ] ; then
848	output="`ReadAllLink $path/$fname_to_find` $output"
849	fi
850	done
851	if [ "$output" = "" ] ; then
852	return 1
853	fi
854	echo "$output"
855	return 0
856	}
857
858
859	LogIt() {
860	if [ -e /dev/stderr ] ; then
861	echo -e "$1" >> /dev/stderr
862	elif [ -e /usr/bin/logger ] ; then
863	/usr/bin/logger -s $1
864	fi
865	echo -e "$1" >> $LOGFILE
866	}
867
868
869	# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
870	MakeMondoConfigFile() {
871	local outfile use_lzo use_comp use_star
872	outfile=$1
873	> $outfile
874	[ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
875	[ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
876	[ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
877	[ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
878	[ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
879	[ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
880	use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
881	use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
882	use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
883	use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
884	echo "use-lzo $use_lzo" >> $outfile
885	echo "use-gzip $use_gzip" >> $outfile
886	echo "use-star $use_star" >> $outfile
887	echo "use-comp $use_comp" >> $outfile
888	echo "datestamp `date`" >> $outfile
889	[ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
890	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-IPADDR nfs-client-ipaddr $outfile
891	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-NETMASK nfs-client-netmask $outfile
892	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-BROADCAST nfs-client-broadcast $outfile
893	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-DEFGW nfs-client-defgw $outfile
894	AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-MOUNT nfs-server-mount $outfile
895	AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-PATH nfs-server-path $outfile
896	AddFileToCfgIfExists $MINDI_TMP/NFS-DEV nfs-dev $outfile
897	AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-IPADDR nfs-server-ipaddr $outfile
898	AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
899	AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
900	AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
901	AddFileToCfgIfExists $MINDI_TMP/ISODIR isodir $outfile
902	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
903	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
904	AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
905	AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
906	AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
907	AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
908	AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
909	AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
910	AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
911	}
912
913
914	MakeMountlist() {
915	local scratchdir mountlist all_partitions current_partition \
916	partition_size partition_format outstring partition_number \
917	partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
918	absolute_partition old_partition_fmt current_lvolume uname skip
919
920	echo "Your raw fstab file looks like this:" >> $LOGFILE
921	echo "------------------------------------" >> $LOGFILE
922	cat $MY_FSTAB >> $LOGFILE
923	echo "Your mountlist will look like this:" \| tee -a $LOGFILE
924	echo "-----------------------------------" >> $LOGFILE
925
926	# scratchdir, mountlist(OUT)
927	scratchdir=$MINDI_TMP
928	mountlist=$1
929
930	# NB: partition = device
931	# NB: mountpt = where the device is mounted
932
933	[ -e "$MY_FSTAB" ] \|\| Die "Cannot find your fstab file ($MY_FSTAB)"
934
935	[ "$mountlist" != "" ] && rm -Rf $mountlist
936	> $mountlist
937	all_partitions=""
938
939	if [ $LVM != "false" ]; then
940	echo -en "Analyzing LVM...\n"
941	$MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
942	if [ $? -ne 0 ]; then
943	LVM="false"
944	fi
945	all_partitions=`cat $MINDI_TMP/lvm.res \| grep -F ">>>" \| cut -d' ' -f2-32`
946	fi
947	all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
948	# echo "all partitions = $all_partitions" > /dev/stderr
949	for i in $IMAGE_DEVS ; do
950	mount \| grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
951	done
952	[ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" \| tr ' ' '\n' \| sort -u \| tr '\n ' ' '`"
953	printf " %-15s %-15s %-15s %-15s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE (MB)" LABEL/UUID \| tee -a $LOGFILE
954	useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1"
955	for c_p in $all_partitions ; do
956	[ "`echo "$useless_dev" \| grep -F "$c_p"`" != "" ] \|\| [ "`echo "$c_p" \| grep ":"`" != "" ] && continue
957	[ "`echo "$c_p" \| grep -x "/dev/cdroms.*"`" ] && continue
958	if [ -h "$c_p" ] && [ "`echo "$c_p" \| grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/md"`" = "" ] ; then
959	current_partition=`readlink -f $c_p`
960	[ "`echo "$current_partition" \| grep -F "/dev/mapper"`" != "" ] && current_partition="$c_p"
961	[ "`echo "$useless_dev" \| grep -F "$current_partition"`" ] && continue
962	else
963	current_partition="$c_p"
964	fi
965	[ "$c_p" = "none" ] && continue
966	redhat_label=""
967	label=""
968	uuid=""
969	absolute_partition=`readlink -f $c_p`
970	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| /bin/grep -w "$current_partition" \| /bin/grep -vx " #." \| $AWK '{print $2}' \| head -n1`
971
972	# Detects noauto partitions not mounted and exclude them
973	partition_option=`tr -s '\t' ' ' < $MY_FSTAB \| /bin/grep -w "$current_partition" \| /bin/grep -vx " #." \| $AWK '{print $4}' \| head -n1`
974	if [ "`echo "$partition_option" \| grep -i noauto`" != "" ] && [ "`mount \| grep -w "$partition_mountpt"`" = "" ] ; then
975	continue
976	fi
977
978	# set default in case we dont't find it
979	str_to_find_fmt_with=$current_partition
980
981	# This part tries to retrieve the correct device from a LABEL line in /etc/fstab
982	# current_partition contains only first column of /etc/fstab
983	if [ "`echo "$current_partition" \| /bin/grep -i "LABEL="`" != "" ]; then
984	redhat_label=`echo "$current_partition" \| cut -d'=' -f2`
985	actual_dev=""
986
987	# 1st try, findfs - the RHEL way of finding labels and their partitions
988	if [ -x "/sbin/findfs" ]; then
989	actual_dev=`/sbin/findfs LABEL=${redhat_label} 2> /dev/null`
990	fi
991
992	# 2nd try : blkid, the good way for all LABEL except swap
993	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
994	actual_dev=`/sbin/blkid \| /bin/grep "$redhat_label" \| grep LABEL= \| cut -d':' -f1`
995	# For LVM FS it will give a /dev/dm-# which should then be converted
996	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
997	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
998	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
999	for dev in `ls /dev/mapper/*`; do
1000	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
1001	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
1002	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1003	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
1004	break
1005	fi
1006	done
1007	fi
1008	fi
1009
1010	# 3rd try, which works on a standard partition (ext2/3), but not on swap
1011	# For LVM gives a /dev/mapper entry
1012	if [ "x$actual_dev" = "x" ]; then
1013	actual_dev=`/bin/mount -l \| /bin/grep "\[$redhat_label\]" \| cut -d' ' -f1`
1014	fi
1015
1016	# 4th try, with vol_id
1017	# SWAP only
1018	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1019	list_swaps=`cat /proc/swaps \| /bin/grep "/dev/" \| $AWK '{ print $1 }' `
1020	for dev_swap in $list_swaps ; do
1021	dev_exists=`/sbin/vol_id $dev_swap \| /bin/grep "$redhat_label"`
1022	if [ "x$dev_exists" != "x" ]; then
1023	actual_dev=$dev_swap
1024	break;
1025	fi
1026	done
1027	fi
1028
1029	# 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1030	# LABEL=SW-cciss/c0d0p3 (RDP)
1031	# or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1032	# SWAP only
1033	if [ "x$actual_dev" = "x" -a _"`echo $current_partition \| /bin/grep -iE 'LABEL=SWAP\|LABEL=SW-'`" != _"" ]; then
1034	skip=""
1035	uname="`uname -r`"
1036	[ "`echo $uname \| grep "2.4.[0-9]"`" != "" ] && skip=16
1037	# 2.6.12 needs 16 (FC3)
1038	[ "`echo $uname \| grep "2.6.[0-1]"`" != "" ] && skip=16
1039	# 2.6.19 and upper needs 1052
1040	[ "`echo $uname \| grep "2.6.19"`" != "" ] && skip=1052
1041	[ "`echo $uname \| grep "2.6.[2-9]"`" != "" ] && skip=1052
1042	if [ $skip = "" ]; then
1043	Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1044	fi
1045	for try_dev in `tail +2 /proc/swaps \| cut -d' ' -f1`
1046	do
1047	# Location of the swap label for kernel 2.6
1048	try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1049	if [ "x$try_dev_label" = "x$redhat_label" ]; then
1050	actual_dev=$try_dev
1051	fi
1052	done
1053	fi
1054
1055	# Check if one of all those tries has known success
1056	if [ "x$actual_dev" != "x" ]; then
1057	current_partition=$actual_dev
1058	else
1059	Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
1060	fi
1061	# This part tries to retrieve the correct device from a UUID line in /etc/fstab
1062	# current_partition contains only first column of /etc/fstab
1063	elif [ "`echo "$current_partition" \| /bin/grep -i "UUID="`" != "" ]; then
1064	uuid=`echo "$current_partition" \| cut -d'=' -f2`
1065	actual_dev=""
1066
1067	# 1st try, findfs - the RHEL way of finding labels and their partitions
1068	if [ -x "/sbin/findfs" ]; then
1069	actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1070	fi
1071
1072	# 2nd try : blkid, the good way for all UUID except swap
1073	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1074	actual_dev=`/sbin/blkid \| /bin/grep "$uuid" \| grep UUID= \| cut -d':' -f1`
1075	# For LVM FS it will give a /dev/dm-# which should then be converted
1076	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
1077	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
1078	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
1079	for dev in `ls /dev/mapper/*`; do
1080	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
1081	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
1082	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1083	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
1084	break
1085	fi
1086	done
1087	fi
1088	fi
1089
1090	# 3th try, with vol_id
1091	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1092	list_dev=`mount \| /bin/grep -E '^/' \| $AWK '{ print $1 }' `
1093	for dev in $list_dev ; do
1094	dev_exists=`/sbin/vol_id $dev \| /bin/grep "$uuid"`
1095	if [ "x$dev_exists" != "x" ]; then
1096	actual_dev=$dev
1097	break;
1098	fi
1099	done
1100	fi
1101
1102	# 4th try, with dumpuuid (VMWare only ?) for swap
1103	if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1104	list_dev=`cat /proc/swaps \| /bin/grep -E '^/' \| $AWK '{ print $1 }' `
1105	for dev in $list_dev ; do
1106	dev_exists=`/sbin/dumpuuid $dev \| /bin/grep "$uuid"`
1107	if [ "x$dev_exists" != "x" ]; then
1108	actual_dev=$dev
1109	break;
1110	fi
1111	done
1112	fi
1113
1114	# Check if one of all those tries has known success
1115	if [ "x$actual_dev" != "x" ]; then
1116	current_partition=$actual_dev
1117	else
1118	Die "Your system uses a UUID partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
1119	fi
1120	else
1121	# Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1122	# they use symlinks in fstab unrelated to what is shown in mount !
1123	if [ _"$partition_mountpt" = _"" ]; then
1124	# set default in case we dont't find it
1125	for tmpp in `tr -s '\t' ' ' < $MY_FSTAB \| /bin/grep -Ev "^#" \| $AWK '{print $1}'`; do
1126	if [ _"`readlink -f $tmpp`" = _"$current_partition" ]; then
1127	str_to_find_fmt_with=$tmpp
1128	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| /bin/grep -w "$tmpp" \| /bin/grep -vx " #." \| $AWK '{print $2}' \| head -n1`
1129	break;
1130	fi
1131	done
1132	fi
1133	fi
1134
1135	partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1136	# Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1137	# for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1138	# the former is then a link to the latter, so we test whether
1139	# $current_partition is actually such a link or not and set
1140	# $current_lvolume accordingly. On Debian you may find more than one answer
1141	# so we remove the one corresponding to /dev/.static
1142	# On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1143	# principle is the same and we need to find the link to it as well.
1144	# Note that $current_lvolume may well be an
1145	# ordinary device. It is just to make sure that we feed the right value
1146	# into any of the LVM tools if possible.
1147
1148	current_lvolume="$current_partition"
1149	if [ $LVM = "v2" ] && [ "`echo $current_partition \| grep -E '^/dev/mapper/'`" ]; then
1150	# .static dir are a Debian specificity
1151	current_lvolume="`find /dev -lname "$current_partition" \| grep -Ev '^/dev/\.static/'`"
1152	echo $current_lvolume \| grep -q ' '
1153	if [ $? -eq 0 ]; then
1154	echo "WARNING: Multiple Logical Volumes found. Report to dev team" >> $LOGFILE
1155	fi
1156	fi
1157	#
1158	# End of LVM device style variation code (other than $current_lvolume).
1159
1160	if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1161	# Size computed via LVM not directly
1162	partition_size="lvm"
1163	else
1164	partition_size=`SizeOfPartition $current_partition`
1165	[ "`echo "$current_partition" \| grep "[0-9]"`" = "" ] && continue
1166	[ "`echo "$current_partition" \| grep -c "^/"`" -ne "1" ] && continue
1167	if [ "$partition_format" = "swap" ] \|\| [ "$partition_mountpt" = "swap" ] ; then
1168	partition_size=`grep -Fv "Priority" /proc/swaps \| tr -s '\t' ' ' \| grep -F "$current_partition" \| $AWK '{print $3}'`
1169	[ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1170	[ "$partition_format" != "swap" ] && partition_format="swap"
1171	if [ "$partition_size" = "" ] ; then
1172	totalsize=0
1173	items=0
1174	for i in `tr -s ' ' '\t' < /proc/swaps \| grep -Fv "Filename" \| cut -f3` ; do
1175	totalsize=$(($totalsize+$i))
1176	items=$(($items+1))
1177	done
1178	[ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) \|\| partition_size=0
1179	[ "$partition_size" -lt "125000" ] && partition_size=125000
1180	echo "I'm guessing $c_p is $(($partition_size/1024))MB" >> $LOGFILE
1181	fi
1182	fi
1183	fi
1184	[ "$partition_mountpt" = "swap" ] && partition_format="swap"
1185	[ "$partition_format" = "swap" ] && partition_mountpt="swap"
1186	if [ "$partition_mountpt" = "" ] ; then
1187	if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1188	if [ "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
1189	partition_mountpt="raid"
1190	partition_format="raid"
1191	else
1192	partition_mountpt="lvm"
1193	partition_format="lvm"
1194	fi
1195	fi
1196	fi
1197	psz=$partition_size
1198	echo "Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)" >> $LOGFILE
1199	[ "$psz" != "lvm" ] && psz=$(($psz/1024))
1200	if [ "`echo " $IMAGE_DEVS " \| grep -F " $current_partition "`" != "" ] ; then
1201	partition_mountpt="image"
1202	old_partition_fmt=$partition_format
1203	partition_format="`$FDISK -l 2>> $LOGFILE \| tr '*' ' ' \| tr '+' ' ' \| tr -s ' ' '\t' \| grep -w "$absolute_partition" \| cut -f5`"
1204	partition_size=$(($partition_size+1)); # just in case
1205	if [ "$partition_format" = "Linux" ] ; then
1206	echo "Are you imaging a mounted swap partition? Silly..." >> $LOGFILE
1207	echo "Reverting format from $old_partition_fmt to $partition_format" >> $LOGFILE
1208	partition_format=$old_partition_fmt
1209	fi
1210	fi
1211	if [ "$EXCLUDE_DEVS" ] && [ "`echo " $EXCLUDE_DEVS " \| grep -F " $current_partition "`" ] \|\| [ "`echo " $EXCLUDE_DEVS " \| grep " $current_partition "`" ] ; then
1212	echo "Excluding $current_partition from mountlist" >> $LOGFILE
1213	continue
1214	fi
1215	if [ ! "$partition_mountpt" ] ; then
1216	echo "------- $FDISK -l $qq log ------------" >> $LOGFILE
1217	for qq in "" `find /dev/ida/cd ! -name 'p' 2> /dev/null`; do
1218	partition_format=`$FDISK -l $qq 2>> $LOGFILE \| grep -w "$c_p" \| sed 's/12/\|/' \| tr -s '\t' ' ' \| cut -d'\|' -f2 \| cut -d' ' -f2-9`
1219	[ "$partition_format" ] && break
1220	done
1221	echo "------- $FDISK log end ------------" >> $LOGFILE
1222	if [ "$partition_format" = "Compaq diagnostics" ] ; then
1223	partition_format="compaq"
1224	elif [ ! "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
1225	LogIt "Unable to find mountpoint of $current_partition - ignoring"
1226	continue
1227	fi
1228	fi
1229	if [ "$redhat_label" ]; then
1230	label="$redhat_label"
1231	elif [ "$uuid" ]; then
1232	label="$uuid"
1233	fi
1234	partition_format="`echo "$partition_format" \| cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1235	[ "$partition_format" = "auto" ] && partition_format="`mount \| grep -w $current_partition \| $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1236	unofficial_outstring=`printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1237	if [ "$current_partition" = "" ] ; then
1238	echo "Unknown partition (outstring = $unofficial_outstring)" >> $LOGFILE
1239	elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1240	if [ "`grep -F device /etc/raidtab 2>/dev/null \| grep -F $current_partition`" ] ; then
1241	partition_mountpt=raid
1242	partition_format=raid
1243	printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
1244	printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1245	else
1246	echo "Unknown mountpoint (outstring = $unofficial_outstring)" >> $LOGFILE
1247	fi
1248	elif [ "$partition_format" = "" ] ; then
1249	echo "Unknown format (outstring = $unofficial_outstring)" >> $LOGFILE
1250	elif [ "$partition_size" = "" ] ; then
1251	echo "Unknown partition size (outstring = $unofficial_outstring)" >> $LOGFILE
1252	elif [ "$partition_mountpt" = "/proc" ] \|\| [ "$partition_mountpt" = "/dev/pts" ] ; then
1253	continue
1254	else
1255	if [ "$partition_format" = "dos" ] \|\| [ "$partition_format" = "msdos" ] ; then
1256	echo "Stupid bastard..." >> $LOGFILE
1257	partition_format="vfat"
1258	fi
1259	printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
1260	printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1261	fi
1262	done
1263	}
1264
1265
1266	MakeSureNumberIsInteger() {
1267	res=`echo "$1" \| tr -s '\-[0-9]' ' '`
1268	if [ "$res" != " " ] && [ "$res" != "" ] ; then
1269	echo "result = '$res'"
1270	Die "$1 should be an integer"
1271	fi
1272	}
1273
1274
1275	OfferToMakeBootableISO() {
1276	local i old_pwd
1277	if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1278	echo -en "Shall I make a bootable CD image? (y/[n]) "
1279	read i
1280	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1281	fi
1282	if [ _"$MINDI_TMP" = _"" ]; then
1283	Die "MINDI_TMP undefined"
1284	fi
1285	rm -Rf $MINDI_TMP/iso
1286	mkdir -p $MINDI_TMP/iso/{images,archives}
1287	cp -f $MINDI_CACHE/.gz $MINDI_TMP/iso/images 2>> $LOGFILE \|\| LogIt "OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/.gz to $MINDI_TMP/iso/images"
1288	echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
1289	for i in memdisk memtest.bin memtest.img ; do
1290	j=$MINDI_LIB/$i
1291	k=$MINDI_TMP/iso
1292	if [ -e "$j" ] ; then
1293	LogIt "Copying $j to $k"
1294	cp -f $j $k 2> /dev/null \|\| Die "Failed to copy $j to $k"
1295	cp -f $j $MINDI_TMP 2> /dev/null \|\| Die "Failed to copy $j to $MINDI_TMP"
1296	if [ _"$MONDO_SHARE" != _"" ]; then
1297	cp -f $j $MONDO_ROOT 2>> $LOGFILE \|\| Die "Failed to copy $j to $MONDO_ROOT"
1298	fi
1299	fi
1300	done
1301	MakeMessageFile > $MINDI_TMP/iso/message.txt
1302	cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE \|\| Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1303	cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE \|\| Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1304	if [ _"$MONDO_SHARE" != _"" ]; then
1305	cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE \|\| Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1306	cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE \|\| Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1307	fi
1308	MakeBootConfFile syslinux > $MINDI_TMP/iso/isolinux.cfg
1309	if [ "$ARCH" != "ia64" ] ; then
1310	cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2> /dev/null \|\| Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1311	fi
1312	old_pwd=`pwd`
1313	cd $MINDI_TMP/iso
1314	if [ "$ARCH" != "ia64" ] ; then
1315	if [ _"$MONDO_SHARE" != _"" ]; then
1316	cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt} $MONDO_ROOT 2> /dev/null \|\| Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1317	cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1318	fi
1319	$ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1320	else
1321	$ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1322	rm -f images/mindi-bootroot.$BOOT_SIZE.img
1323	fi
1324	if [ "$?" -ne "0" ] ; then
1325	echo "----------- $ISO_CMD's errors --------------" >> $LOGFILE
1326	cat $MINDI_TMP/mkisofs.log >> $LOGFILE
1327	echo "$ISO_CMD returned the following errors:-"
1328	cat $MINDI_TMP/mkisofs.log
1329	LogIt "Failed to create ISO image."
1330	else
1331	echo "Created bootable ISO image at $MINDI_CACHE/mindi.iso" \| tee -a $LOGFILE
1332	fi
1333	rm -f $MINDI_TMP/mkisofs.log
1334	cd $old_pwd
1335	}
1336
1337
1338	OfferToMakeBootableUSB() {
1339	local i
1340	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1341	echo -n "Shall I make a bootable USB image ? (y/[n]) "
1342	read i
1343	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1344	if [ "$USBDEVICE" = "" ]; then
1345	echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1346	read dev
1347	USBDEVICE=$dev
1348	fi
1349	echo "WARNING: This will erase all content on $USBDEVICE"
1350	echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1351	read i
1352	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1353	fi
1354	if [ _"$MINDI_TMP" = _"" ]; then
1355	Die "MINDI_TMP undefined"
1356	fi
1357	rm -Rf $MINDI_TMP/usb
1358	mkdir -p $MINDI_TMP/usb
1359	USBPART="${USBDEVICE}1"
1360
1361	echo -en "Transforming $USBDEVICE in a Bootable device "
1362	echo -en "."
1363	echo "Transforming $USBDEVICE in a Bootable device" >> $LOGFILE
1364	echo "Checking $USBDEVICE" >> $LOGFILE
1365	$FDISK -l $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE
1366	if [ $? -ne 0 ]; then
1367	echo "Unable to access $USBDEVICE" \| tee -a $LOGFILE
1368	echo "Make sure your USB device is pluged in" \| tee -a $LOGFILE
1369	exit -1
1370	fi
1371	echo -en "."
1372	echo "Unmounting $USBDEVICE just in case" >> $LOGFILE
1373	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1374	# If your key has no MBR it may cause an issue
1375	# Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1376	echo "Preparing $USBDEVICE" >> $LOGFILE
1377	$FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE << EOF
1378	d
1379	d
1380	d
1381	d
1382	n
1383	p
1384	1
1385
1386
1387	t
1388	b
1389	a
1390	1
1391	w
1392	EOF
1393	if [ $? -ne 0 ]; then
1394	echo "Unable to create a vfat Filesystem on $USBDEVICE" \| tee -a $LOGFILE
1395	echo "Make sure your USB device is pluged in" \| tee -a $LOGFILE
1396	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
1397	MindiExit -1
1398	fi
1399	echo -en "."
1400	echo "Creating a vfat filesystem on $USBPART" >> $LOGFILE
1401	mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1402	if [ $? -ne 0 ]; then
1403	echo "Unable to create a vfat filesystem on $USBPART" \| tee -a $LOGFILE
1404	echo "Make sure your USB device is pluged in and partitioned ($USBPART must exist on it)" \| tee -a $LOGFILE
1405	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
1406	MindiExit -1
1407	fi
1408	echo -en "."
1409	echo "Mounting $USBPART on $MINDI_TMP/usb" >> $LOGFILE
1410	mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1411	if [ $? -ne 0 ]; then
1412	echo "Unable to mount $USBPART on $MINDI_TMP/usb" \| tee -a $LOGFILE
1413	echo "Make sure your USB device is pluged in, partitioned and formated ($USBPART must exist on it)" \| tee -a $LOGFILE
1414	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
1415	MindiExit -1
1416	fi
1417	echo -en "."
1418	mkdir -p $MINDI_TMP/usb/images
1419	cp -f $MINDI_CACHE/.img $MINDI_CACHE/.gz $MINDI_TMP/usb/images 2>> $LOGFILE \|\| LogIt "OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1420	echo -en "."
1421	echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
1422	for i in memdisk memtest.bin memtest.img ; do
1423	j=$MINDI_LIB/$i
1424	k=$MINDI_TMP/usb
1425	if [ -e "$j" ] ; then
1426	LogIt "Copying $j to $k"
1427	cp -f $j $k 2> /dev/null \|\| Die "Failed to copy $j to $k"
1428	cp -f $j $MINDI_TMP 2> /dev/null \|\| Die "Failed to copy $j to $MINDI_TMP"
1429	fi
1430	done
1431	echo -en "."
1432	MakeMessageFile > $MINDI_TMP/usb/message.txt
1433	echo -en "."
1434	cp $kernelpath $MINDI_TMP/usb/vmlinuz 2> /dev/null \|\| Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1435	echo -en "."
1436	cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1437	echo -en "."
1438	MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1439	echo -en "."
1440	umount $MINDI_TMP/usb
1441	if [ "$ARCH" != "ia64" ] ; then
1442	syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1443	if [ "$?" -ne "0" ] ; then
1444	echo "----------- syslinux's errors --------------" \|tee -a $LOGFILE
1445	cat $MINDI_TMP/syslinux.log \|tee -a $LOGFILE
1446	LogIt "Failed to create USB image."
1447	else
1448	echo -e "$DONE"
1449	echo "Created bootable USB image on $USBDEVICE" >> $LOGFILE
1450	fi
1451	rm -f $MINDI_TMP/syslinux.log
1452	else
1453	echo "No USB boot support for ia64" \| tee -a $LOGFILE
1454	MindiExit -1
1455	fi
1456	}
1457
1458
1459	MakeMessageFile() {
1460	iss="/dev/null"
1461	[ -e /etc/issue ] && iss="/etc/issue"
1462	[ -e /etc/issue.net ] && iss="/etc/issue.net"
1463	if [ "`grep -Fi "debian" $iss 2> /dev/null`" ] ; then
1464	sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt \| sed s/YYYYY/"Mondo Rescue"/ \| sed s/XXXXX/"a cousin of"/ \| sed s%DDDDD%"Debian GNU\/`uname -s` `cut -d ' ' -f 3 $iss` `hostname`"% \| sed s/KKKKK/"Kernel `uname -r` on a `uname -m`"/ \| sed s/TTTTT/"`LC_TIME=C date`"/ \| sed s/%r/"`uname -r`"/ \| sed s/%t/"`hostname`"/
1465	else
1466	sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt \| sed s/YYYYY/"Mondo Rescue"/ \| sed s/XXXXX/"a cousin of"/ \| sed s/DDDDD/"`grep -i "linux" $iss \| sed s~/~~ \| head -n1 \| tr -s ' ' ' '`"/ \| sed s/KKKKK/"`grep -i "kernel" $iss \| sed s~/~~ \| head -n1 \| tr -s ' ' ' '`"/ \| sed s/TTTTT/"`LC_TIME=C date`"/ \| sed s/' 'r' 'on' 'an' 'm/' '`uname -r`' 'on' 'an' '`uname -m`/ \| sed s/%r/"`uname -r`"/ \| sed s/%t/"`hostname`"/
1467	fi
1468	if [ _"$MONDO_SHARE" != _"" ]; then
1469	if [ "$CDRECOVERY" != "yes" ] ; then
1470	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1471	echo -en "Press <enter> to continue.\n"
1472	elif [ ! "$MINDI_TMP" ] ; then
1473	echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1474	if [ -e "$MINDI_LIB/memtest.img" ] ; then
1475	echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1476	fi
1477	else
1478	echo -en "$BOOT_MEDIA_MESSAGE"
1479	fi
1480	else
1481	echo -en "\
1482	To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1483	CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1484	fi
1485	fi
1486	echo -en "\n\n\n"
1487	}
1488
1489
1490	MakeBootConfFile() {
1491	local options i ooo
1492	options=""
1493	# Type of boot file (elilo or syslinux/isolinux)
1494	type=$1
1495	if [ "$type" = "elilo" ]; then
1496	sep="="
1497	else
1498	sep=" "
1499	fi
1500
1501	# Generic header for conf file
1502	if [ "$type" != "elilo" ] ; then
1503	echo -en "prompt 1\ndisplay message.txt\n"
1504	else
1505	echo -en "prompt\n"
1506	fi
1507
1508	# Compute which default option to boot from
1509	if [ "$CDRECOVERY" = "yes" ] ; then
1510	echo -en "default${sep}RESTORE\n"
1511	# In case it's mondoarchive
1512	elif [ _"$MONDO_SHARE" != _"" ]; then
1513	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1514	echo -en "default${sep}iso\n"
1515	else
1516	echo -en "default${sep}interactive\n"
1517	fi
1518	else
1519	echo -en "default${sep}expert\n"
1520	fi
1521
1522	# Handle timeout
1523	if [ "$CDRECOVERY" != "yes" ] ; then
1524	echo -en "timeout${sep}300\n"
1525	else
1526	echo -en "timeout${sep}10000\n"
1527	fi
1528	echo -en "\n"
1529
1530	# prepare which labels will be generted
1531	if [ "$CDRECOVERY" = "yes" ] ; then
1532	options="RESTORE expert"
1533	else
1534	if [ _"$MONDO_SHARE" != _"" ]; then
1535	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1536	options="iso"
1537	else
1538	options="interactive expert compare iso nuke isonuke"
1539	fi
1540	else
1541	options="expert"
1542	fi
1543	fi
1544
1545	# Generate rest of conf file
1546	for i in $options ; do
1547	ooo=$i
1548	[ "$ooo" = "RESTORE" ] && ooo="nuke"
1549	if [ "$type" = "elilo" ]; then
1550	outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo_mode $ADDITIONAL_BOOT_PARAMS \"\n"
1551	else
1552	outstr="label $i\n\tkernel /vmlinuz\n\tappend initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo}_mode $ADDITIONAL_BOOT_PARAMS\n"
1553	fi
1554	echo -en "$outstr"
1555	done
1556
1557	if [ -e "$MINDI_LIB/memtest.img" ] ; then
1558	if [ "$type" = "elilo" ]; then
1559	echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1560	echo -en "image=/memdisk\n\tlabel=memtest\nappend=\"initrd=memtest.img\"\n"
1561	else
1562	echo -en "label memtest\n\tkernel /memtest.bin\n"
1563	echo -en "label=memtest\n\tkernel /memdisk\nappend initrd=memtest.img\n"
1564	fi
1565	fi
1566	}
1567
1568
1569	PrepareBootDiskImage_LILO() {
1570	local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1571	imagesdir=$MINDI_CACHE
1572	kernelpath=$1
1573
1574	retval=0
1575	[ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
1576	echo -en "Making "$BOOT_SIZE"KB boot disk..."
1577	TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath \| cut -f1` \|\| Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1578	echo -en "..."
1579	imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1580	mountpoint=$MINDI_TMP/mountpoint.$$
1581	mkdir -p $mountpoint
1582	dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null \|\| Die "Cannot dd blank file"
1583	mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1584	mount -t vfat -o loop $imagefile $mountpoint \|\| LogIt "Cannot mount (PBDI)"
1585	# copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1586	mkdir -p $mountpoint/etc
1587	liloconf=$mountpoint/elilo.conf
1588
1589	MakeBootConfFile elilo > $liloconf
1590
1591	# Copy it so that CD-ROM menu entry is satisfied
1592	mountefi=0
1593	df -T \| grep /boot/efi \| grep -q vfat
1594	if [ $? -ne 0 ]; then
1595	mount /boot/efi
1596	if [ $? -ne 0 ]; then
1597	echo "You have to mount your EFI partition when using mindi"
1598	MindiExit -1
1599	fi
1600	mountefi=1
1601	fi
1602	el=`find /boot/efi -name elilo.efi`
1603	cp $el $mountpoint
1604	cp $liloconf $mountpoint
1605	if [ $mountefi -eq 1 ]; then
1606	umount /boot/efi 2>&1 > /dev/null
1607	fi
1608
1609	echo "Copying $MINDI_TMP/initrd.img to $mountpoint..." >> $LOGFILE
1610	cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1611	if [ "$?" -ne "0" ] ; then
1612	LogIt "Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1613	cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1614	LogIt "Please unload some of your modules and try again."
1615	rm -f $MINDI_TMP/mtpt.$$
1616	LogIt "Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1617	retval=$(($retval+1))
1618	fi
1619	MakeMessageFile > $mountpoint/message.txt
1620
1621	mkdir -p $mountpoint/tmp
1622	if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1623	cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1624	fi
1625
1626	# copy the kernel across
1627	[ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1628	dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1629	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
1630	cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2> /dev/null
1631	if [ "$?" -ne "0" ] ; then
1632	echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
1633	du -sk $mountpoint/* >> $LOGFILE
1634	echo "--- end of list of files ---" >> $LOGFILE
1635	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n\
1636	Sorry, your kernel is too big for your image.\n" >> $LOGFILE
1637	[ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1638	cd $old_pwd
1639	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
1640	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
1641	# losetup /dev/loop0 -d
1642	[ "$imagefile" != "" ] && rm -f $imagefile
1643	return 0
1644	fi
1645	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
1646	max_kernel_size=$(($free_space+`du -sk $kernelpath \| cut -f1`))
1647	echo "Free space left on image = $free_space KB" >> $LOGFILE
1648	echo "Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" >> $LOGFILE
1649	# make it bootable
1650	[ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1651	[ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1652	if [ "$KERN_DISK_MADE" ] ; then
1653	echo "Not running LILO. It's not that kind of disk." >> $LOGFILE
1654	fi
1655
1656	cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1657	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
1658	echo -en "..."
1659	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
1660	if [ "$retval" -eq "0" ] ; then
1661	echo -en "...$DONE\n"
1662	if [ "$KERN_DISK_MADE" ] ; then
1663	LogIt "$BOOT_SIZE KB boot disks were created OK\n"
1664	fi
1665	else
1666	echo -en "...failed\n"
1667	LogIt $BOOT_SIZE"KB boot disk was NOT created\n"
1668	[ "$imagefile" != "" ] && rm -f $imagefile
1669	fi
1670	[ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
1671	return $retval
1672	}
1673
1674
1675	PrepareBootDiskImage_SYSLINUX() {
1676	local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage
1677	imagesdir=$MINDI_CACHE
1678	kernelpath=$1
1679	do_boot_root_thingy=""
1680	local retval old_pwd
1681	retval=0
1682
1683	[ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
1684	echo -en "Making "$BOOT_SIZE"KB boot disk..."
1685	TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath \| cut -f1` \|\| Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1686	echo -en "..."
1687	imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1688	mountpoint=$MINDI_TMP/mountpoint.$$
1689	mkdir -p $mountpoint
1690	dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null \|\| Die "Cannot dd blank file"
1691	echo "Creating vfat filesystem on $imagefile" >> $LOGFILE
1692	mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1693	syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1694
1695	mount -t vfat -o loop $imagefile $mountpoint \|\| LogIt "Cannot mount (PBDI)"
1696
1697	# copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1698	MakeMessageFile > $mountpoint/message.txt
1699	MakeBootConfFile syslinux > $mountpoint/syslinux.cfg
1700	echo "Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..." >> $LOGFILE
1701	cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1702	if [ "$?" -ne "0" ] ; then
1703	LogIt "Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1704	cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1705	LogIt "Please unload some of your modules and try again."
1706	rm -f $MINDI_TMP/mtpt.$$
1707	LogIt "Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1708	retval=$(($retval+1))
1709	fi
1710
1711	mkdir -p $mountpoint/tmp
1712	if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1713	cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1714	fi
1715
1716	# copy the kernel across
1717	[ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1718	dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1719	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
1720	cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
1721	if [ "$?" -ne "0" ] ; then
1722	echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
1723	du -sk $mountpoint/* >> $LOGFILE
1724	echo "--- end of list of files ---" >> $LOGFILE
1725	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n\
1726	Sorry, your kernel is too big for your image.\n" >> $LOGFILE
1727	[ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1728	cd $old_pwd
1729	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
1730	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
1731
1732	[ "$imagefile" != "" ] && rm -f $imagefile
1733	return 0
1734	fi
1735	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
1736	max_kernel_size=$(($free_space+`du -sk $kernelpath \| cut -f1`))
1737	echo "Free space left on image = $free_space KB" >> $LOGFILE
1738	echo "Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" >> $LOGFILE
1739
1740	# make it bootable
1741	[ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1742	mkdir -p $mountpoint/etc
1743	[ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1744	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
1745	echo -en "..."
1746	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
1747
1748	if [ "$retval" -eq "0" ] ; then
1749	echo -en "...$DONE\n"
1750	if [ "$KERN_DISK_MADE" ] ; then
1751	[ "$imagefile" != "" ] && rm -f $imagefile
1752	LogIt "$BOOT_SIZE KB boot disks were created OK\n"
1753	fi
1754	else
1755	echo -en "...failed\n"
1756	LogIt $BOOT_SIZE"KB boot disk was NOT created\n"
1757	[ "$imagefile" != "" ] && rm -f $imagefile
1758	fi
1759	[ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
1760	return $retval
1761	}
1762
1763
1764	ParseModprobeForIncludes() {
1765	local MODPROBE_CONF mpincfile includes include
1766
1767	MODPROBE_CONF=/etc/modprobe.conf
1768	mpincfile=$1
1769	touch $mpincfile
1770	if [ -a $MODPROBE_CONF ]; then
1771	includes=$(awk '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF\|sort -u)
1772	if [ -n "$includes" ]; then
1773	for include in $includes
1774	do
1775	if [ -a "$include" ]; then
1776	echo $include >> $mpincfile
1777	fi
1778	done
1779	fi
1780	fi
1781	}
1782
1783
1784	PrepareDataDiskImages() {
1785	local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
1786
1787	imagesdir=$MINDI_CACHE
1788	rm -f $imagesdir/mindi.iso
1789	needlist=$MINDI_TMP/what-we-need.txt
1790	bigdir=$MINDI_TMP/bigdir
1791	mkdir -p $bigdir/usr/bin
1792	mkdir -p $bigdir/usr/sbin
1793	includefile=$MINDI_TMP/$$.includefile.txt
1794
1795	lfiles="$DEPLIST_FILE"
1796	lines=`grep -vx " #." $lfiles \| grep -vx "" \| wc -l`
1797	ParseModprobeForIncludes $includefile
1798	lines=$(($lines+`cat $includefile \| wc -l`))
1799	cat $lfiles $includefile \| GenerateGiantDependencyList $needlist $lines
1800	res=$?
1801	rm -f $includefile
1802	if [ "$YOUR_KERNEL_SUCKS" ]; then
1803	pwd=`pwd`
1804	cd $MINDI_TMP
1805	for i in `ListKernelModulePaths \| HackPathsToFailsafe` ; do
1806	tar cf - ./$i 2>> $LOGFILE \| (cd $bigdir ; tar xf -) \|\| Die "PDDI can't copy $i->$bigdir"
1807	done
1808	for i in $EXTRA_MODS ; do
1809	j=`find lib/modules/$FAILSAFE_KVER -name $i.*o.gz 2> /dev/null`
1810	[ ! "$j" ] && echo "WARNING - cannot find failsafe module $i.o.gz" >> $LOGFILE
1811	for k in $j ; do
1812	tar cf - $k 2>> $LOGFILE \| (cd $bigdir ; tar xf -)
1813	echo "Added failsafe module $k to ramdisk" >> $LOGFILE
1814	done
1815	done
1816	cd $pwd
1817	else
1818	ListKernelModulePaths >> $needlist
1819	fi
1820	if [ "$res" -ne "0" ] ; then
1821	Die "You have $res files present in dependency list\nbut absent from filesystem."
1822	fi
1823	FindAndAddUserKeyboardMappingFile
1824	mkdir -p $bigdir/tmp
1825	if [ _"$MONDO_SHARE" != _"" ]; then
1826	MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
1827	cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
1828	fi
1829	[ -d "/mnt/.boot.d" ] && echo "Oh Jebus" > $bigdir/tmp/DUMBASS-GENTOO
1830	DropOptimizedLibraries $needlist $bigdir
1831	echo -en "Assembling dependency files"
1832	CopyDependenciesToDirectory < $needlist $bigdir
1833
1834	# also copy io.sys and msdos.sys, if we can find them
1835	for i in `mount \| cut -d' ' -f3` ; do
1836	for j in io.sys msdos.sys ; do
1837	[ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
1838	done
1839	done
1840
1841	# master boot record, too
1842	i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
1843	if [ "$i" ] ; then
1844	LogIt "Backing up $i's MBR"
1845	dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
1846	sleep 1
1847	sync
1848	j=$i
1849	[ -h "$j" ] && j=`readlink -f $j`
1850	LogIt "Creating /dev/boot_device ($j)"
1851	mkdir -p $bigdir/dev
1852	cp -pRdf $j $bigdir/dev/boot_device 2> /dev/null \|\| Die "Unable to create /dev/boot_device on ramdisk"
1853	fi
1854
1855	old_pwd=`pwd`
1856	cd $bigdir
1857
1858	# Get terminfo content
1859	ti="usr/share/terminfo/l"
1860	if [ -d /$ti ]; then
1861	mkdir -p $ti
1862	cp -Rdf /$ti/* $ti 2>> $LOGFILE \|\| LogIt "WARNING - error occurred while copying terminfo"
1863	fi
1864	if [ -e "$MONDO_SHARE/restore-scripts" ]; then
1865	cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
1866	[ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
1867	fi
1868	[ -d "/lib/dev-state" ] && tar cf - /lib/dev-state 2>> $LOGFILE \| tar xf -
1869	cd $old_pwd
1870	echo -e "$DONE"
1871	TOTAL_BIGDIR_SIZE=`du -sk $bigdir \| cut -f1`
1872	MakeMountlist $MINDI_TMP/mountlist.txt
1873	mkdir -p $bigdir/tmp
1874	cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2> /dev/null \|\| Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
1875	if [ _"$MONDO_SHARE" != _"" ]; then
1876	cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
1877	fi
1878	if [ $LVM != "false" ]; then
1879	$MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
1880	if [ "$?" -ne "0" ]; then
1881	LVM="false"
1882	rm -f $bigdir/tmp/i-want-my-lvm
1883	fi
1884	fi
1885	cat $bigdir/tmp/mountlist.txt >> $LOGFILE
1886	echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2> /dev/null
1887	echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2> /dev/null
1888	if [ _"$MONDO_SHARE" != _"" ]; then
1889	for q in filelist.full.gz biggielist.txt ; do
1890	[ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
1891	cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
1892	done
1893	fi
1894
1895	echo -en "Tarring and zipping the data content..."
1896	size_of_all_tools=`du -sk $bigdir \| cut -f1`
1897	(cd $bigdir ; tar -b 4096 -cf - . 2> /dev/null \| gzip -9 > $imagesdir/all.tar.gz)
1898	du -sk $imagesdir/*gz >> $LOGFILE
1899	echo -e "$DONE"
1900
1901	FRIENDLY_OUTSTRING="Boot and data disk images were created."
1902	rm -rf $bigdir
1903	rm -f $needlist
1904	}
1905
1906
1907	ProcessLDD() {
1908	local incoming f d nd bd bnd
1909	read incoming
1910	while [ "$incoming" != "" ]; do
1911	# We take the full path name of the dyn. lib. we want
1912	incoming=`echo "$incoming" \| awk '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
1913	for f in $incoming ; do
1914	# echo modified file name if one of the parent dir is a link
1915	# by replacing the original dirname by the destination of the link
1916	d="`dirname $f`"
1917	found="false"
1918	while [ "$d" != "/" ]; do
1919	if [ -h "$d" ]; then
1920	nd=`readlink -f $d`
1921	bd=`basename $d`
1922	bnd=`basename $nd`
1923	f=`echo $f \| sed "s~/$bd/~/$bnd/~"`
1924	echo $d
1925	fi
1926	d="`dirname $d`"
1927	done
1928
1929	echo "$f"
1930	echo "`ReadAllLink $f`"
1931	done
1932	read incoming
1933	done
1934	}
1935
1936
1937	Prompt() {
1938	echo -en "$1"
1939	read line
1940	}
1941
1942
1943	ReadLine() {
1944	local i incoming
1945	read incoming
1946	i=0
1947	while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
1948	i=$(($i+1))
1949	read incoming
1950	done
1951	echo "$incoming"
1952	}
1953
1954
1955	SizeOfPartition() {
1956	local devpath drive res stub
1957	device=$1
1958	if [ "`echo "$device" \| grep -F "/dev/md"`" != "" ] ; then
1959	res=`SizeOfRaidPartition $device`
1960	[ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
1961	echo "$res"
1962	return 0
1963	fi
1964	# patch from Bill <bill@iwizard.biz> - 2003/08/25
1965	res=`$FDISK -s $device 2>> $LOGFILE`
1966	# end patch
1967	[ "$res" = "" ] && res=`df -k -P -x supermount \| tr -s '\t' ' ' \| grep -F "$device " \| cut -d' ' -f2`
1968	[ "$res" = "" ] && res="-1"
1969	echo $res
1970	return 0
1971	}
1972
1973
1974	SizeOfRaidPartition() {
1975	local real_dev smallest_size silly tmp
1976
1977	silly=999999999
1978	smallest_size=$silly
1979
1980	for real_dev in `GetRaidDevMembers $1` ; do
1981	tmp=`SizeOfPartition $real_dev`
1982	[ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
1983	done
1984
1985	if [ "$smallest_size" = "$silly" ] ; then
1986	echo "-1"
1987	return 1
1988	else
1989	echo "$smallest_size"
1990	return 0
1991	fi
1992	}
1993
1994
1995	StripComments()
1996	{
1997	local tempfile
1998
1999	tempfile=$MINDI_TMP/$$.strip.txt
2000	cp -f $1 $tempfile 2>> $LOGFILE
2001	$AWK '{if (substr($0,0,1)!="#" \|\| substr($0,0,3)=="#!/") {print $0;};}' $tempfile > $1
2002	rm -f $tempfile
2003	echo "Stripped comments from $2" >> $LOGFILE
2004	}
2005
2006
2007
2008	StripExecutable()
2009	{
2010	local tmpfile
2011
2012	tmpfile=$MINDI_TMP/stripped.$$.dat
2013	[ -d "$1" ] \|\| [ -h "$1" ] && return
2014	cp -f $1 $tmpfile 2>> $LOGFILE
2015	strip $tmpfile 2> /dev/null
2016	if [ "$?" -eq "0" ] ; then
2017	cp -f $tmpfile $1 2>> $LOGFILE
2018	echo "Stripped binary $2" >> $LOGFILE
2019	fi
2020	rm -f $tmpfile
2021	}
2022
2023
2024	TryToFindKernelPath() {
2025	local fname incoming res fkern_ver we_want_version possible_kernels noof_kernels kernelpath kdate duff_kernels
2026
2027	we_want_version=`uname -r`
2028	possible_kernels=""
2029	duff_kernels=""
2030
2031	if [ "$ARCH" = "ia64" ] ; then
2032	root="/boot/efi/efi"
2033	else
2034	root="/"
2035	fi
2036	for fname in `find $root -maxdepth 2 -type f \| grep -E 'lin\|kern' \| grep -Ev '^/proc/\|^/net/'` ; do
2037	[ ! -e "$fname" ] && continue
2038	[ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2039	file $fname \| grep -q gzip
2040	if [ "$?" -eq "0" ] ; then
2041	# Used by ia64
2042	fkern_ver=`gzip -cd $fname \| strings 2> /dev/null \| grep "[2-9]+[.][0-9]+[.][0-9]+[^\@]@"`
2043	else
2044	fkern_ver=`strings $fname 2> /dev/null \| grep "[2-9]+[.][0-9]+[.][0-9]+[^\@]@"`
2045	fi
2046	[ "$fkern_ver" = "" ] && continue
2047	[ "`echo "$fkern_ver" \|grep -F "$we_want_version "`" = "" ] && continue
2048	[ -f "$fname" ] \|\| continue
2049	[ -h "$fname" ] && continue
2050	kdate=`uname -v \| $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' \| $AWK '{print $NF;}'`
2051	file $fname \| grep -q gzip
2052	if [ "$?" -eq "0" ] ; then
2053	# Used by ia64
2054	if [ "`gzip -cd $fname \| strings 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
2055	LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2056	duff_kernels="$fname $duff_kernels"
2057	else
2058	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
2059	possible_kernels="$fname $possible_kernels"
2060	fi
2061	else
2062	if [ "`strings $fname 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
2063	LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2064	duff_kernels="$fname $duff_kernels"
2065	else
2066	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
2067	possible_kernels="$fname $possible_kernels"
2068	fi
2069	fi
2070	done
2071	if [ ! "$possible_kernels" ] && uname -a \| grep Knoppix > /dev/null ; then
2072	possible_kernels=`find /boot/vmlinuz-2.* \| tail -n1`
2073	fi
2074	if [ ! "$possible_kernels" ] ; then
2075	LogIt "No kernel matches exactly. Are there any duff kernels?"
2076	possible_kernels="$duff_kernels"
2077	if [ ! "$possible_kernels" ] ; then
2078	LogIt "Sorry, no duff kernels either"
2079	else
2080	LogIt "I bet you're running Debian or Gentoo, aren't you?"
2081	LogIt "Your kernel doesn't have a sane builddate. Oh well..."
2082	fi
2083	fi
2084	possible_kernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| sort -u \| tr '\n' ' '`
2085	noof_kernels=`CountItemsIn "$possible_kernels"`
2086	if [ "$noof_kernels" -eq "0" ] ; then
2087	LogIt "Could not find your kernel."
2088	if [ -e "/boot/vmlinuz" ] ; then
2089	LogIt "Using /boot/vmlinuz as a last resort."
2090	output=/boot/vmlinuz
2091	else
2092	output=""
2093	fi
2094	elif [ "$noof_kernels" -eq "1" ] ; then
2095	kernelpath=`echo "$possible_kernels" \| sed s/' '//`
2096	echo "Your kernel is $kernelpath (v`uname -r`)" >> $LOGFILE
2097	output="$kernelpath"
2098	else
2099	for i in $possible_kernels ; do
2100	if echo $i \| grep "`uname -r`" ; then
2101	LogIt "OK, I used my initiative and found that "
2102	LogIt "$i is probably your kernel. "
2103	output="$i"
2104	return
2105	fi
2106	done
2107	if echo " $possible_kernels " \| grep -F "/boot/vmlinuz " &> /dev/null ; then
2108	output=/boot/vmlinuz
2109	echo "Schlomo, this one's for you." >> $LOGFILE
2110	else
2111	LogIt "Two or more possible kernels found. You may specify any one of them and the "
2112	LogIt "boot disks will still work, probably. If one does not work, try another."
2113	LogIt "$possible_kernels"
2114	echo ""
2115	fi
2116	fi
2117	echo "$output" \| tr -s ' ' '\n' \| sort -u \| tr '\n' ' '
2118	}
2119
2120
2121	TurnTgzIntoRdz() {
2122	local tgz_dir_fname rdz_fname tempfile mountpoint old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path
2123
2124	tgz_dir_fname=$1
2125	rdz_fname=$2
2126	kernelsize=$3
2127	maxsize=$(($BOOT_SIZE-$kernelsize))
2128	maxsize=$(($maxsize*2)); # to allow for compression of 50%
2129	tempfile=$MINDI_TMP/temp.rd
2130	mountpoint=$MINDI_TMP/mnt1
2131	res=0
2132	echo -en "..."
2133	dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null \|\| Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2134	echo -en "..."
2135	echo "Creating ext2 filesystem on $tempfile" >> $LOGFILE
2136	mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE \|\| Die "Unable to create an ext2 file system on $tempfile"
2137	echo -en "..."
2138	mkdir -p $mountpoint
2139	mount -t ext2 -o loop $tempfile $mountpoint \|\| Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2140	echo -en "..."
2141	old_pwd=`pwd`
2142	cd $mountpoint
2143
2144	# AL04Oct08: Check whether /lib64 is a link and if so explicitly create one in rootfs
2145	if [ -h "/lib64" ]; then
2146	mkdir -p lib \|\| LogIt "Unable to create lib in $mountpoint."
2147	ln -s lib lib64 \|\| LogIt "/lib64 is a symbolic link, but I couldn't create it in $mountpoint."
2148	fi
2149
2150	cp -Rdf $tgz_dir_fname/* . 2>&1 >> $LOGFILE
2151	tar -zxf symlinks.tgz \|\| Die "Cannot untar symlinks.tgz"
2152
2153	cd dev \|\| Die "Can't cd to dev"
2154	tar -zxf dev-entries.tgz \|\| Die "Cannot untar dev-entries.tgz"
2155	rm -f dev-entries.tgz
2156	cd ..
2157
2158	for w in insmod.static insmod.static.old ; do
2159	s=`which $w 2> /dev/null`
2160	if [ -e "$s" ] ; then
2161	tar cf - $s 2> /dev/null \| tar xf -
2162	fi
2163	done
2164
2165	[ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2166
2167	# Handle the case where busybox and mount are dynamically linked
2168	file $MINDI_LIB/rootfs/bin/busybox 2>&1 \| grep -q "dynamically"
2169	if [ $? -eq 0 ]; then
2170	# We want to use the real mount and all the supported variants (nfs, cifs, ...)
2171	rm -f bin/mount $MINDI_TMP/busy.lis
2172	mountlis=`grep mount $DEPLIST_FILE`
2173	for f in $MINDI_LIB/rootfs/bin/busybox $mountlis ; do
2174	if [ -f $f ]; then
2175	LocateDeps $f >> $MINDI_TMP/busy.lis
2176	fi
2177	done
2178	tar cf - $mountlis `sort -u $MINDI_TMP/busy.lis` 2> /dev/null \| tar xf -
2179	rm -f $MINDI_TMP/busy.lis
2180	fi
2181
2182	# Copy of files mandatory for ld.so
2183	cp -rp /etc/ld.so.c* $mountpoint/etc
2184
2185	mkdir -p $mountpoint/tmp
2186	# Management of udev (which includes modprobe in rules)
2187	ps auxww \| grep -v grep \| grep -qw udevd
2188	if [ $? -eq 0 ]; then
2189	echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2190	LogIt "udev device manager found"
2191	tar cf - /etc/udev 2> /dev/null \| tar xf -
2192	# This avoids NIC remapping if on another machine at restore time on Debian at least
2193	rm -f ./etc/udev/rules.d/z25_persistent-net.rules
2194	tar cf - /lib*/udev 2> /dev/null \| tar xf -
2195	if [ -x /sbin/udevd ]; then
2196	lis2=`grep -Ev '^#' $MINDI_CONF/udev.files`
2197	lis=""
2198	# Get only the files which exist in that list
2199	# and potentially their symlink structure
2200	for i in $lis2; do
2201	if [ -h $i ]; then
2202	j=$i
2203	while [ -h $j ]; do
2204	lis="$lis $j"
2205	j=`readlink $j`
2206	done
2207	lis="$lis $j"
2208	elif [ -f $i ]; then
2209	lis="$lis $i"
2210	fi
2211	done
2212	# And their deps
2213	LocateDeps $lis > $MINDI_TMP/udev.lis
2214	for i in $lis; do
2215	if [ "`echo $i \| cut -c1`" = "/" ]; then
2216	j=`echo $i \| cut -c2-`
2217	[ "$j" != "" ] && rm -f $j
2218	fi
2219	done
2220	tar cf - $lis `sort -u $MINDI_TMP/udev.lis` 2> /dev/null \| tar xf -
2221	rm -f $MINDI_TMP/udev.lis
2222	else
2223	echo "udevd daemon not in standard place (/sbin)" 2>&1 \| tee -a $LOGFILE
2224	echo "mindi will use static devices which may cause problems" 2>&1 \| tee -a $LOGFILE
2225	rm -f $mountpoint/tmp/USE-UDEV
2226	fi
2227	fi
2228
2229	# Management of potential HW info (Proliant only at the moment)
2230	rm -rf $MINDI_CACHE/bkphw
2231	mindi-bkphw $MINDI_CACHE $MINDI_CONF \| tee -a $LOGFILE
2232	if [ -d $MINDI_CACHE/bkphw ]; then
2233	LogIt "Hardware Information found and saved ..."
2234	cp -rp $MINDI_CACHE/bkphw .
2235	if [ -f $MINDI_CACHE/tools.files ]; then
2236	lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
2237	LocateDeps $lis > $MINDI_TMP/tools.lis
2238	tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> /dev/null \| tar xf -
2239	fi
2240	if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2241	mv -f $MINDI_CACHE/mindi-rsthw .
2242	chmod 755 ./mindi-rsthw
2243	fi
2244	rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2245	fi
2246
2247	for w in cdrom groovy-stuff ; do
2248	mkdir -p mnt/$w
2249	done
2250
2251	tar cf - /dev/fd0[1,2][4,7,8] 2> /dev/null \| tar xf -
2252
2253	cd $old_pwd
2254	echo -en "..."
2255	old_pwd=`pwd`
2256	if [ "$YOUR_KERNEL_SUCKS" ] ; then
2257	cd $MINDI_TMP
2258	needed_modules_path=lib/modules/$FAILSAFE_KVER
2259	else
2260	cd /
2261	if [ "${kernelname}" != "" ]
2262	then
2263	needed_modules_path=lib/modules/${kernelname}
2264	else
2265	needed_modules_path=lib/modules/`uname -r`
2266	fi
2267	fi
2268
2269	needed_modules=""
2270	list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2271
2272	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
2273	# For PXE boot
2274	list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2275	fi
2276	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2277	list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2278	fi
2279	for i in $DENY_MODS; do
2280	echo "Removing $i from the list of modules to load" >> $LOGFILE
2281	list_of_groovy_mods=`echo ${list_of_groovy_mods} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
2282	done
2283
2284	[ -e "$needed_modules_path" ] \|\| LogIt "path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
2285	for i in $list_of_groovy_mods ; do
2286	needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
2287	done
2288
2289	for i in $needed_modules ; do
2290	[ -e "$i" ] && s=`du -sk $i \| cut -f1` \|\| s=""
2291	[ "$YOUR_KERNEL_SUCKS" ] && i=$MINDI_TMP/$i
2292	echo "Adding $i ($s KB) to the rootfs" >> $LOGFILE
2293	tar cf - $i 2>/dev/null \| (cd $mountpoint ; tar xf -) \|\| LogIt "Unable to copy $i to $mountpoint"
2294	# Uncompress modules if not using udev and native modprobe
2295	if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2296	if [ "`echo "$i" \| grep -F ".gz"`" ]; then
2297	echo "Uncompressing $i" >> $LOGFILE
2298	gunzip -f $mountpoint/$i
2299	fi
2300	fi
2301	done
2302
2303	# Also copy modules.dep in case of udev so that normal modprobe works
2304	tar cf - /$needed_modules_path/modules.dep 2>/dev/null \| (cd $mountpoint ; tar xf -) \|\| LogIt "Unable to copy modules.dep to $mountpoint"
2305
2306	if [ ! -e "/sbin/devfsd" ] \|\| [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2307	echo "Deleting devfsd daemon from ramdisk" >> $LOGFILE
2308	[ ! -e "/sbin/devfsd" ] && echo "...because /sbin/devfsd not found" >> $LOGFILE
2309	[ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && echo "...because kernel is failsafe" >> $LOGFILE
2310	rm -f $mountpoint/sbin/devfsd
2311	fi
2312	cd $old_pwd
2313	[ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2314	dd if=/dev/zero of=$mountpoint/zero &> /dev/null
2315	rm -f $mountpoint/zero
2316	if [ _"$MONDO_SHARE" != _"" ]; then
2317	MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2318	cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP &> /dev/null
2319	cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>/dev/null \|\| Die "Cannot copy mountlist to ramdisk"
2320	echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2321	echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2322	[ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2323	[ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2324	[ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2325	[ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2326	fi
2327	mkdir -p $mountpoint/proc
2328	echo "$BOOT_SIZE" > $mountpoint/tmp/$BOOT_SIZE.siz
2329	# Determine what filesystem to use for initrd image
2330	echo "Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd." >> $LOGFILE
2331	gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2332	[ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2333	case "$gvFileSystem" in
2334	"ext2fs")
2335	# say what will be used
2336	echo "Creating an ext2 initrd image..." >> $LOGFILE
2337	# kernel expects linuxrc in ext2 filesystem
2338	( cd $mountpoint && ln -sf sbin/init linuxrc )
2339	# unmount loop filesystem and create image file using the standard approach
2340	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
2341	dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2342	bs=`tune2fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
2343	ADDITIONAL_BOOT_PARAMS="$ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2344	gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2345	rm -f ${rdz_fname}.tmp
2346	# log that we are done
2347	echo "...done." >> $LOGFILE
2348	;;
2349	"initramfs")
2350	# say what will be used
2351	echo "Creating a gzip'ed cpio (AKA initramfs) initrd image..." >> $LOGFILE
2352	# make sure that cpio is there
2353	which cpio &> /dev/null; [ $? -eq 0 ] \|\| Die "cpio not found. Please install package cpio and try again."
2354	# go into filesystem
2355	cd $mountpoint
2356	# kernel expects init in cpio filesystem
2357	ln -sf sbin/init init
2358	# create cpio image file and unmount loop filesystem
2359	find . -print \| cpio -o -H newc \| gzip -9 > $rdz_fname 2> /dev/null
2360	cd $old_pwd
2361	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
2362	# log that we are done
2363	echo "...done." >> $LOGFILE
2364	;;
2365	*)
2366	Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2367	;;
2368	esac
2369	if [ "$res" -eq "0" ] ; then
2370	echo -en "..."
2371	else
2372	echo -en "\rMade an rdz WITH ERRORS. \n"
2373	fi
2374	return 0
2375	}
2376
2377
2378	##############################################################################
2379	#----------------------------------- Main -----------------------------------#
2380	##############################################################################
2381
2382	# Now we can create what we need
2383	mkdir -p $MINDI_TMP
2384
2385	# Purge from potential old run
2386	if [ _"$MINDI_CACHE" = _"" ]; then
2387	Die "MINDI_CACHE undefined"
2388	fi
2389	rm -rf $MINDI_CACHE/* 2> /dev/null
2390	mkdir -p $MINDI_CACHE
2391
2392	if [ "$1" = "--printvar" ] ; then
2393	shift
2394	if [ _"$1" != _"" ] ; then
2395	set \| grep -Ew "^$1" \| cut -d= -f2
2396	fi
2397	MindiExit 0
2398	fi
2399
2400	> $LOGFILE
2401	echo "mindi v$MINDI_VERSION" >> $LOGFILE
2402	echo "$ARCH architecture detected" >> $LOGFILE
2403	echo "mindi called with the following arguments:" >> $LOGFILE
2404	echo "$@" >> $LOGFILE
2405	echo "Start date : `date`" >> $LOGFILE
2406	echo "-----------------------------" >> $LOGFILE
2407
2408	[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && ln -sf /sbin/mkdosfs /sbin/mkfs.vfat
2409
2410	# Log some capital variables
2411	[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2412	echo "MONDO_SHARE = $MONDO_SHARE" >> $LOGFILE
2413	echo "MINDI_LIB = $MINDI_LIB" >> $LOGFILE
2414	echo "MINDI_SBIN = $MINDI_SBIN" >> $LOGFILE
2415	[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2416	echo "MINDI_CONF = $MINDI_CONF" >> $LOGFILE
2417	if [ -f $MINDI_CONFIG ]; then
2418	echo "-----------------------------" >> $LOGFILE
2419	echo " Mindi configuration file " >> $LOGFILE
2420	echo "-----------------------------" >> $LOGFILE
2421	grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2422	echo "-----------------------------" >> $LOGFILE
2423	fi
2424
2425
2426	trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2427
2428	# Sanity checks
2429	which which > /dev/null 2> /dev/null \|\| Die "Please install 'which'."
2430	which strings > /dev/null 2> /dev/null \|\| Die "Please install binutils and libbinutils; you have no 'strings' executable."
2431	which gawk > /dev/null 2> /dev/null \|\| Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2432	which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` \|\| AWK="`which awk 2>/dev/null`"
2433	if which awk &> /dev/null ; then
2434	if ! which gawk &> /dev/null ; then
2435	LogIt "You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2436	fi
2437	fi
2438	which mke2fs > /dev/null 2> /dev/null \|\| Die "Please put mke2fs in system path"
2439	[ ! -e "$FDISK" ] && Die "Cannot find (s)fdisk"
2440
2441	[ "`uname -r \| grep "2.4.[0-6]" \| grep -v "2.4.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2442
2443	# Update the PATH variable if incomplete
2444	if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2445	PATH=$PATH:/sbin:/usr/sbin
2446	export PATH
2447	echo "Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily." >> $LOGFILE
2448	echo "However, you may wish to ask your vendor to provide a permanent fix..." >> $LOGFILE
2449	echo " Or you might like to call 'su -' instead of 'su', for example." >> $LOGFILE
2450	fi
2451
2452	# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
2453	if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ] && [ "$kernelpath" = "FAILSAFE" ]; then
2454	source $MINDI_LIB/FindDistroFailsafe
2455	# Log kernel image
2456	LogIt "FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
2457	else
2458	[ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null \| grep -E "2\.[46]" \| cut -d' ' -f1`
2459	fi
2460
2461	if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2462	Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2463	fi
2464
2465	### BERLIOS
2466	### Fix as it's not mandatory on ia64
2467	if [ "$ARCH" = "ia64" ] ; then
2468	if which elilo &> /dev/null ; then
2469	LILO_EXE=elilo
2470	else
2471	LILO_EXE=`which false 2> /dev/null`
2472	fi
2473	else
2474	FindIsolinuxBinary
2475	fi
2476	trap "Aborted" SIGTERM
2477	DONE="\r\t\t\t\t\t\t\t\tDone. "
2478	kernelpath=""
2479	MONDO_ROOT=/var/cache/mondo
2480	mkdir -p $MONDO_ROOT
2481
2482	if [ -d "/proc/lvm" ]; then
2483	# LVM v1
2484	LVMCMD=""
2485	LVM="v1"
2486	elif [ -d "/dev/mapper" ]; then
2487	# LVM v2
2488	LVMCMD="lvm"
2489	LVM="v2"
2490	else
2491	LVM="false"
2492	fi
2493	echo "LVM set to $LVM" >> $LOGFILE
2494	echo "----------" >> $LOGFILE
2495	echo "mount result:" >> $LOGFILE
2496	echo "-------------" >> $LOGFILE
2497	mount >> $LOGFILE
2498	echo "-------------" >> $LOGFILE
2499	if [ -e /etc/raidtab ]; then
2500	echo "-------------" >> $LOGFILE
2501	echo "/etc/raidtab content:" >> $LOGFILE
2502	echo "-------------" >> $LOGFILE
2503	cat /etc/raidtab >> $LOGFILE
2504	fi
2505	echo "-------------" >> $LOGFILE
2506	echo "cat /proc/cmdline:" >> $LOGFILE
2507	echo "-------------" >> $LOGFILE
2508	cat /proc/cmdline >> $LOGFILE
2509	echo "-------------" >> $LOGFILE
2510	echo "cat /proc/swaps:" >> $LOGFILE
2511	echo "-------------" >> $LOGFILE
2512	cat /proc/swaps >> $LOGFILE
2513	echo "-------------" >> $LOGFILE
2514	echo "cat /proc/partitions:" >> $LOGFILE
2515	echo "-------------" >> $LOGFILE
2516	cat /proc/partitions >> $LOGFILE
2517	echo "-------------" >> $LOGFILE
2518	echo "cat /proc/filesystems:" >> $LOGFILE
2519	echo "-------------" >> $LOGFILE
2520	cat /proc/filesystems >> $LOGFILE
2521	echo "-------------" >> $LOGFILE
2522	echo "lsmod result:" >> $LOGFILE
2523	echo "-------------" >> $LOGFILE
2524	lsmod >> $LOGFILE
2525	MODULES="`cat /proc/modules \| awk '{print $1}'`"
2526	if [ -x /usr/sbin/esxcfg-module ]; then
2527	echo "-------------" >> $LOGFILE
2528	echo "VMWare ESX server detected - Enabling dedicated support" >> $LOGFILE
2529	echo "-------------" >> $LOGFILE
2530	echo "VMWare modules" >> $LOGFILE
2531	echo "-------------" >> $LOGFILE
2532	/usr/sbin/esxcfg-module -l >> $LOGFILE
2533	MODULES="$MODULES `/usr/sbin/esxcfg-module -l \| awk '{print $1}'`"
2534	fi
2535	echo "FORCE_MODS:" >> $LOGFILE
2536	echo "-------------" >> $LOGFILE
2537	echo $FORCE_MODS >> $LOGFILE
2538	echo "-------------" >> $LOGFILE
2539	echo "DENY_MODS:" >> $LOGFILE
2540	echo "-------------" >> $LOGFILE
2541	echo $DENY_MODS >> $LOGFILE
2542	echo "-------------" >> $LOGFILE
2543	echo "df result:" >> $LOGFILE
2544	echo "----------" >> $LOGFILE
2545	df -T >> $LOGFILE
2546	echo "-------------" >> $LOGFILE
2547	echo "Liste of extra modules is:" >> $LOGFILE
2548	echo "$EXTRA_MODS" >> $LOGFILE
2549	echo "-------------" >> $LOGFILE
2550
2551	# Compute libata version
2552	laver=`modinfo libata \| grep -Ei '^Version:' \| cut -d: -f2 \| cut -d. -f1 \| sed 's/ *//g' 2> /dev/null`
2553	# If libata v2 is used then remove ide-generic as it will perturbate boot
2554	if [ "`echo $MODULES \| grep libata`" ]; then
2555	if [ "$laver" = "2" ]; then
2556	DENY_MODS="$DENY_MODS ide-generic"
2557	echo "ide-generic removed from module list as your system uses libata v2+" >> $LOGFILE
2558	echo "-------------" >> $LOGFILE
2559	fi
2560	fi
2561
2562	FLOPPY_WAS_MOUNTED=""
2563	for mtpt in /media/floppy /mnt/floppy /floppy ; do
2564	if mount \| grep -w $mtpt &> /dev/null ; then
2565	FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
2566	umount $mtpt
2567	fi
2568	done
2569
2570	#
2571	# If we have a USB device we need to store info
2572	# and remove it from the parameters line
2573	#
2574	if [ "$#" -ne "0" ] ; then
2575	if [ "$1" = "--usb" ] ; then
2576	shift
2577	USBDEVICE=$1
2578	if [ _"$USBDEVICE" = _"" ]; then
2579	Die "No USB device specified"
2580	fi
2581	shift
2582	fi
2583	fi
2584
2585	if [ "$#" -ne "0" ] ; then
2586	if [ "$1" = "--findkernel" ] ; then
2587	res=`TryToFindKernelPath`
2588	# Avoids logfile content for mondo
2589	export MONDO_SHARE=""
2590	if [ "$res" = "" ] ; then
2591	MindiExit -1
2592	else
2593	echo "$res"
2594	MindiExit 0
2595	fi
2596	elif [ "$1" = "--locatedeps" ] ; then
2597	[ ! "$2" ] && Die "Please specify the binary to look at"
2598	LocateDeps $2
2599	# Avoids logfile content for mondo
2600	export MONDO_SHARE=""
2601	MindiExit $?
2602	elif [ "$1" = "--readalllink" ] ; then
2603	[ ! "$2" ] && Die "Please specify the binary to look at"
2604	ReadAllLink $2
2605	# Avoids logfile content for mondo
2606	export MONDO_SHARE=""
2607	MindiExit $?
2608	elif [ "$1" = "--makemountlist" ] ; then
2609	[ ! "$2" ] && Die "Please specify the output file"
2610	MakeMountlist $2
2611	# Avoids logfile content for mondo
2612	export MONDO_SHARE=""
2613	MindiExit $?
2614	elif [ "$1" = "-V" ] \|\| [ "$1" = "-v" ] \|\| [ "$1" = "--version" ] \|\| [ "$1" = "-version" ] ; then
2615	echo "Mindi v$MINDI_VERSION"
2616	# Avoids logfile content for mondo
2617	export MONDO_SHARE=""
2618	MindiExit 0
2619	elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
2620	MONDO_TMP=$2
2621	# Change MINDI_TMP for the one provided by mondo
2622	# So that it can get back the built files
2623	mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2> /dev/null
2624	rmdir $MINDI_TMP
2625	export MINDI_TMP=$MONDO_TMP
2626	mkdir -p $MINDI_TMP
2627	# This is the scratch dir in mondo - subdir images
2628	MINDI_CACHE=$3
2629	if [ _"$MINDI_CACHE" != _"" ]; then
2630	mkdir -p $MINDI_CACHE
2631	fi
2632	kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
2633	###
2634	### Sq-Modification...
2635	### Attempt to locate kernel specific module path
2636	### if module path is found then use it other wise use uname -r to set it...
2637	###
2638	kernelname=`echo $kernelpath \| cut -d'-' -f2-`
2639	LogIt "kernelname = $kernelname"
2640	LogIt "kernelpath = $kernelpath"
2641	if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
2642	then
2643	LogIt "Module path for ${kernelpath} not found..."
2644	LogIt "using running kernel\'s modules."
2645	kernelname=`uname -r`
2646	else
2647	LogIt "Using modules for kernel: ${kernelname}"
2648	fi
2649	###
2650	### end of Sq-Modification
2651	###
2652	TAPEDEV=$5
2653	TAPESIZE=$6
2654	FILES_IN_FILELIST=$7
2655	USE_LZO=$8
2656	CDRECOVERY=$9
2657	if [ "${10}" = "(null)" ] \|\| [ "${10}" = "" ] ; then
2658	IMAGE_DEVS=""
2659	else
2660	IMAGE_DEVS="`echo "${10}" \| tr '\|' ' '`"
2661	fi
2662	if [ "${11}" ] ; then
2663	LILO_OPTIONS=""
2664	# LogIt "LILO will use conservative settings, to be compatible with older BIOSes."
2665	fi
2666	LAST_FILELIST_NUMBER=${12}
2667	ESTIMATED_TOTAL_NOOF_SLICES=${13}
2668	EXCLUDE_DEVS="${14}"
2669	USE_COMP="${15}"
2670	USE_LILO="${16}"
2671	USE_STAR="${17}"
2672	INTERNAL_TAPE_BLOCK_SIZE="${18}"
2673	DIFFERENTIAL="${19}"
2674	USE_GZIP="${20}"
2675	NOT_BOOT="${21}"
2676	[ "$USE_COMP" = "" ] && USE_COMP=yes
2677	[ "$USE_GZIP" = "" ] && USE_GZIP=no
2678	[ "$NOT_BOOT" = "" ] && NOT_BOOT=no
2679	[ "$TAPEDEV" ] && LogIt "This is a tape-based backup. Fine."
2680	[ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
2681	kernelname=`echo $kernelpath \| cut -d'-' -f2-`
2682	if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
2683	then
2684	LogIt "Module path for ${kernelpath} not found..."
2685	LogIt "using running kernel\'s modules."
2686	kernelname=`uname -r`
2687	else
2688	LogIt "Using modules for kernel: ${kernelname}"
2689	fi
2690	[ "$CDRECOVERY" = "yes" ] && [ "$TAPEDEV" != "" ] && Die "Sorry, you can't use --cd-recovery and --write-tapes at the same time"
2691	# MONDO_ROOT is the real scratchdir
2692	MONDO_ROOT=`echo $MINDI_CACHE \| sed 's/\(.\)\/./\1/'`
2693	if [ _"$MONDO_ROOT" != _"" ]; then
2694	mkdir -p $MONDO_ROOT
2695	else
2696	Die "MONDO_ROOT is undefined"
2697	fi
2698	else
2699	echo "Syntax: mindi (--custom ....)" >> /dev/stderr
2700	MindiExit -1
2701	fi
2702	fi
2703	[ "$CDRECOVERY" = "yes" ] \|\| CDRECOVERY=no
2704
2705	if [ _"$MONDO_SHARE" = _"" ]; then
2706	LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
2707	LogIt "Latest Mindi is available from http://www.mondorescue.org"
2708	LogIt "BusyBox sources are available from http://www.busybox.net"
2709	LogIt "------------------------------------------------------------------------------"
2710	else
2711	echo "You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks" >> $LOGFILE
2712	fi
2713	if [ -f $MINDI_LIB/rootfs/bin/busybox ]; then
2714	LogIt "Mindi-`$MINDI_LIB/rootfs/bin/busybox 2>&1 \| head -1`"
2715	else
2716	LogIt "Unable to find mindi-busybox, please install it"
2717	MindiExit -1
2718	fi
2719
2720	# for Mandrake 9.2, which comes with two aes.o.gz modules :-/
2721	insmod /lib/modules/`uname -r`///misc/aes.*o.gz >> $LOGFILE 2>> $LOGFILE
2722	for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
2723	insmod $i >> $LOGFILE 2>> $LOGFILE
2724	done
2725
2726	KERN_DISK_MADE=""
2727
2728	echo "DIFFERENTIAL = $DIFFERENTIAL" >> $LOGFILE
2729	echo "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE" >> $LOGFILE
2730	echo "NOT_BOOT = '$NOT_BOOT'" >> $LOGFILE
2731	if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
2732	LogIt "Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
2733	MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2734	MakeMountlist $MINDI_TMP/mountlist.txt
2735	mkdir -p $MINDI_TMP/small-all/tmp
2736	cd $MINDI_TMP/small-all
2737	cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>/dev/null \|\| Die "Cannot copy small all.tar.gz"
2738	tar -cv ./tmp \| gzip -9 > $MINDI_TMP/all.tar.gz \|\| Die "Cannot make small all.tar.gz"
2739	sleep 2
2740	LogIt "Done. Exiting."
2741	MindiExit 0
2742	fi
2743
2744	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2745	LogIt "Including the generation of a Bootable USB device on $USBDEVICE"
2746	fi
2747
2748	if [ "$kernelpath" = "" ] ; then
2749	[ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
2750	echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
2751	read ch
2752	if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
2753	USE_OWN_KERNEL="yes"
2754	else
2755	USE_OWN_KERNEL="no"
2756	fi
2757	if [ "$USE_OWN_KERNEL" = "yes" ]; then
2758	YOUR_KERNEL_SUCKS=""
2759	kernelpath=`TryToFindKernelPath`
2760	if [ "$kernelpath" = "" ] ; then
2761	echo -n "Please enter kernel path : "
2762	read kernelpath
2763	fi
2764	else
2765	YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
2766	fi
2767	fi
2768	if [ "$YOUR_KERNEL_SUCKS" != "" ] \|\| [ "$kernelpath" = "" ] \|\| [ "$kernelpath" = "SUCKS" ] \|\| [ "$kernelpath" = "FAILSAFE" ] ; then
2769	# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
2770	if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ]; then
2771	source $MINDI_LIB/FindDistroFailsafe
2772	# Log kernel image
2773	LogIt "FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
2774	kernelpath="$FAILSAFE_KBIN"
2775	LogIt "I shall include a failsafe kernel, not your kernel, in the boot disks.\n"
2776	LogIt "The failsafe kernel is $kernelpath.\n"
2777	LogIt "However, you are still running your kernel. If Mindi fails to create your\n"
2778	LogIt "disks then it may still be a result of a problem with your kernel.\n"
2779	pwd=`pwd`
2780	cd $MINDI_TMP
2781	mkdir -p lib/modules
2782	cp -a "/lib/modules/$FAILSAFE_KVER" "lib/modules/$FAILSAFE_KVER" \|\| Die "Cannot copy kernel modules."
2783	cd $pwd
2784	else
2785	kernelpath=$MINDI_LIB/vmlinuz
2786	LogIt "I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
2787	LogIt "However, you are still running your kernel. If Mindi fails to create your"
2788	LogIt "disks then it may still be a result of a problem with your kernel."
2789	pwd=`pwd`
2790	cd $MINDI_TMP
2791	bzip2 -dc $MINDI_LIB/lib.tar.bz2 \| tar -x \|\| Die "Cannot unzip lib.tar.bz2"
2792	cd $pwd
2793	fi
2794	YOUR_KERNEL_SUCKS="Your kernel sucks"
2795	fi
2796	echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
2797	[ "$(($RANDOM%64))" -eq "0" ] && LogIt "Dude, I've looked inside your computer and it's really dusty..."
2798
2799	[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it.\nGo to http://www.mondorescue.org and download it, then install it."
2800
2801	PrepareDataDiskImages
2802
2803	ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
2804	rds=$(($ramdisk_size-$((ramdisk_size%4096))))
2805	export ramdisk_size=$rds
2806
2807	echo "Ramdisk will be $ramdisk_size KB" >> $LOGFILE
2808	if [ "$ARCH" = "ia64" ] ; then
2809	PrepareBootDiskImage_LILO $kernelpath \|\| Die "Failed to create ia64 image disk image."
2810	else
2811	PrepareBootDiskImage_SYSLINUX $kernelpath \|\| Die "Failed to create $ramdisk_size MB disk image."
2812	fi
2813
2814	[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
2815	...Or type 'memtest' to test your PC's RAM thoroughly.\n"
2816
2817	if [ _"$MONDO_SHARE" = _"" ]; then
2818	ListImagesForUser
2819	OfferToMakeBootableISO
2820	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
2821	OfferToMakeBootableUSB
2822	fi
2823	LogIt "Finished."
2824	elif [ "$TAPEDEV" ] ; then
2825	rm -f $MINDI_CACHE/{img,iso}
2826	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2827	OfferToMakeBootableUSB
2828	fi
2829	OfferToMakeBootableISO
2830	if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
2831	cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
2832	else
2833	Die "Cannot find all.tar.gz, to be written to tape"
2834	fi
2835	elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2836	OfferToMakeBootableUSB
2837	else
2838	OfferToMakeBootableISO
2839	fi
2840	# cleanup
2841	LogIt "$FRIENDLY_OUTSTRING"
2842	for mtpt in $FLOPPY_WAS_MOUNTED ; do
2843	mount $mtpt
2844	done
2845	MindiExit 0

Note: See TracBrowser for help on using the repository browser.

Download in other formats: