Last change
on this file since 1822 was 1815, checked in by Bruno Cornec, 16 years ago |
- Increase BOOT_SIZE and EXTRA_SIZE to support features such as HW recovery
- Handles udev.files files which could be symlinks
- Improve udev support for distro with compressed modules (mdv e.g.)
- Fix modules.dep copy
- /sbin/pam_console_apply is needed by mdv udev conf
- Adds support for nohw boot option to avoid re-setuping the HW conf
|
File size:
1.9 KB
|
Line | |
---|
1 | README for mondo/mindi usage with tools to backup Hardware configuration
|
---|
2 |
|
---|
3 | Some Hardware Manufacturers such as HP provide tools to store the Hardware configuration of their systems, such as the BIOS setup, the RAID setup, ...
|
---|
4 |
|
---|
5 | Mindi has a script able to store the Hardware configuration and those parameters may be restored before launching mondorestore during the boot phase computed by mindi, in order to re-setup the machine as the original one.
|
---|
6 |
|
---|
7 | For the moment, only HP Proliant systems are supported. If you have tools to allow support for other type of machines, feel free to contribute patches to that script.
|
---|
8 |
|
---|
9 | If you have a Proliant system you first need to get the Smart Start Scripting Toolkit. Due to licenses issues, mindi cannot provide those tools itself. You need to get them from http://www.hp.com/servers/sstoolkit
|
---|
10 |
|
---|
11 | Mindi expects to find those tools under /usr/local/bin as described in the deplist.d/proliant.conf configuration file. Here are the steps to set it up correctly:
|
---|
12 |
|
---|
13 | Older URL:
|
---|
14 | wget ftp://ftp.compaq.com/pub/softlib2/software1/pubsw-linux/p308169895/v40154/ss-scripting-toolkit-linux-1.70.tar.gz
|
---|
15 |
|
---|
16 | cd /tmp
|
---|
17 | wget ftp://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p308169895/v43548/ss-scripting-toolkit-linux-1.81.tar.gz
|
---|
18 | mkdir ssstk
|
---|
19 | cd ssstk
|
---|
20 | tar xvfz ../ss-scripting-toolkit-linux-1.81.tar.gz
|
---|
21 | cp -a utilities/hponcfg /usr/local/bin
|
---|
22 | cp -a utilities/conrep /usr/local/bin
|
---|
23 | cp -a utilities/conrep.xml /usr/local/bin
|
---|
24 | cp -a utilities/cpqacuxe/cpqacuxe /usr/local/bin
|
---|
25 | cp -a utilities/cpqacuxe/bld /usr/local/bin
|
---|
26 | mv /usr/local/bin/bld/*.so /usr/local/lib
|
---|
27 | echo /usr/local/lib >> /etc/ld.so.conf
|
---|
28 | ldconfig
|
---|
29 |
|
---|
30 | You're now ready to check your configuration by running mindi-bkphw.
|
---|
31 |
|
---|
32 | In order to have a working hponcfg binary you also need to install the hprsm/hpasm packages from HP Web site. Refer to http://welcome.hp.com/country/us/en/support.html?pageDisplay=drivers
|
---|
33 |
|
---|
34 | 2007-05-30 Initial file
|
---|
Note:
See
TracBrowser
for help on using the repository browser.