[1765] | 1 | /* vi: set sw=4 ts=4: */
|
---|
[821] | 2 | /*
|
---|
| 3 | * Based on shasum from http://www.netsw.org/crypto/hash/
|
---|
| 4 | * Majorly hacked up to use Dr Brian Gladman's sha1 code
|
---|
| 5 | *
|
---|
| 6 | * Copyright (C) 2002 Dr Brian Gladman <brg@gladman.me.uk>, Worcester, UK.
|
---|
| 7 | * Copyright (C) 2003 Glenn L. McGrath
|
---|
| 8 | * Copyright (C) 2003 Erik Andersen
|
---|
| 9 | *
|
---|
[1765] | 10 | * Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
|
---|
[821] | 11 | *
|
---|
| 12 | * ---------------------------------------------------------------------------
|
---|
| 13 | * Issue Date: 10/11/2002
|
---|
| 14 | *
|
---|
| 15 | * This is a byte oriented version of SHA1 that operates on arrays of bytes
|
---|
| 16 | * stored in memory. It runs at 22 cycles per byte on a Pentium P4 processor
|
---|
| 17 | */
|
---|
| 18 |
|
---|
| 19 | #include "libbb.h"
|
---|
| 20 |
|
---|
[1765] | 21 | #define SHA1_BLOCK_SIZE 64
|
---|
| 22 | #define SHA1_DIGEST_SIZE 20
|
---|
| 23 | #define SHA1_HASH_SIZE SHA1_DIGEST_SIZE
|
---|
| 24 | #define SHA2_GOOD 0
|
---|
| 25 | #define SHA2_BAD 1
|
---|
[821] | 26 |
|
---|
[1765] | 27 | #define rotl32(x,n) (((x) << n) | ((x) >> (32 - n)))
|
---|
[821] | 28 |
|
---|
[1765] | 29 | #define SHA1_MASK (SHA1_BLOCK_SIZE - 1)
|
---|
[821] | 30 |
|
---|
| 31 | /* reverse byte order in 32-bit words */
|
---|
[1765] | 32 | #define ch(x,y,z) ((z) ^ ((x) & ((y) ^ (z))))
|
---|
| 33 | #define parity(x,y,z) ((x) ^ (y) ^ (z))
|
---|
| 34 | #define maj(x,y,z) (((x) & (y)) | ((z) & ((x) | (y))))
|
---|
[821] | 35 |
|
---|
| 36 | /* A normal version as set out in the FIPS. This version uses */
|
---|
| 37 | /* partial loop unrolling and is optimised for the Pentium 4 */
|
---|
[1765] | 38 | #define rnd(f,k) \
|
---|
| 39 | do { \
|
---|
| 40 | t = a; a = rotl32(a,5) + f(b,c,d) + e + k + w[i]; \
|
---|
| 41 | e = d; d = c; c = rotl32(b, 30); b = t; \
|
---|
| 42 | } while (0)
|
---|
[821] | 43 |
|
---|
| 44 | static void sha1_compile(sha1_ctx_t *ctx)
|
---|
| 45 | {
|
---|
| 46 | uint32_t w[80], i, a, b, c, d, e, t;
|
---|
| 47 |
|
---|
| 48 | /* note that words are compiled from the buffer into 32-bit */
|
---|
| 49 | /* words in big-endian order so an order reversal is needed */
|
---|
| 50 | /* here on little endian machines */
|
---|
| 51 | for (i = 0; i < SHA1_BLOCK_SIZE / 4; ++i)
|
---|
| 52 | w[i] = htonl(ctx->wbuf[i]);
|
---|
| 53 |
|
---|
| 54 | for (i = SHA1_BLOCK_SIZE / 4; i < 80; ++i)
|
---|
| 55 | w[i] = rotl32(w[i - 3] ^ w[i - 8] ^ w[i - 14] ^ w[i - 16], 1);
|
---|
| 56 |
|
---|
| 57 | a = ctx->hash[0];
|
---|
| 58 | b = ctx->hash[1];
|
---|
| 59 | c = ctx->hash[2];
|
---|
| 60 | d = ctx->hash[3];
|
---|
| 61 | e = ctx->hash[4];
|
---|
| 62 |
|
---|
| 63 | for (i = 0; i < 20; ++i) {
|
---|
| 64 | rnd(ch, 0x5a827999);
|
---|
| 65 | }
|
---|
| 66 |
|
---|
| 67 | for (i = 20; i < 40; ++i) {
|
---|
| 68 | rnd(parity, 0x6ed9eba1);
|
---|
| 69 | }
|
---|
| 70 |
|
---|
| 71 | for (i = 40; i < 60; ++i) {
|
---|
| 72 | rnd(maj, 0x8f1bbcdc);
|
---|
| 73 | }
|
---|
| 74 |
|
---|
| 75 | for (i = 60; i < 80; ++i) {
|
---|
| 76 | rnd(parity, 0xca62c1d6);
|
---|
| 77 | }
|
---|
| 78 |
|
---|
| 79 | ctx->hash[0] += a;
|
---|
| 80 | ctx->hash[1] += b;
|
---|
| 81 | ctx->hash[2] += c;
|
---|
| 82 | ctx->hash[3] += d;
|
---|
| 83 | ctx->hash[4] += e;
|
---|
| 84 | }
|
---|
| 85 |
|
---|
| 86 | void sha1_begin(sha1_ctx_t *ctx)
|
---|
| 87 | {
|
---|
| 88 | ctx->count[0] = ctx->count[1] = 0;
|
---|
| 89 | ctx->hash[0] = 0x67452301;
|
---|
| 90 | ctx->hash[1] = 0xefcdab89;
|
---|
| 91 | ctx->hash[2] = 0x98badcfe;
|
---|
| 92 | ctx->hash[3] = 0x10325476;
|
---|
| 93 | ctx->hash[4] = 0xc3d2e1f0;
|
---|
| 94 | }
|
---|
| 95 |
|
---|
| 96 | /* SHA1 hash data in an array of bytes into hash buffer and call the */
|
---|
| 97 | /* hash_compile function as required. */
|
---|
| 98 | void sha1_hash(const void *data, size_t length, sha1_ctx_t *ctx)
|
---|
| 99 | {
|
---|
| 100 | uint32_t pos = (uint32_t) (ctx->count[0] & SHA1_MASK);
|
---|
| 101 | uint32_t freeb = SHA1_BLOCK_SIZE - pos;
|
---|
| 102 | const unsigned char *sp = data;
|
---|
| 103 |
|
---|
| 104 | if ((ctx->count[0] += length) < length)
|
---|
| 105 | ++(ctx->count[1]);
|
---|
| 106 |
|
---|
| 107 | while (length >= freeb) { /* tranfer whole blocks while possible */
|
---|
| 108 | memcpy(((unsigned char *) ctx->wbuf) + pos, sp, freeb);
|
---|
| 109 | sp += freeb;
|
---|
| 110 | length -= freeb;
|
---|
| 111 | freeb = SHA1_BLOCK_SIZE;
|
---|
| 112 | pos = 0;
|
---|
| 113 | sha1_compile(ctx);
|
---|
| 114 | }
|
---|
| 115 |
|
---|
| 116 | memcpy(((unsigned char *) ctx->wbuf) + pos, sp, length);
|
---|
| 117 | }
|
---|
| 118 |
|
---|
| 119 | void *sha1_end(void *resbuf, sha1_ctx_t *ctx)
|
---|
| 120 | {
|
---|
| 121 | /* SHA1 Final padding and digest calculation */
|
---|
| 122 | #if BB_BIG_ENDIAN
|
---|
| 123 | static uint32_t mask[4] = { 0x00000000, 0xff000000, 0xffff0000, 0xffffff00 };
|
---|
| 124 | static uint32_t bits[4] = { 0x80000000, 0x00800000, 0x00008000, 0x00000080 };
|
---|
| 125 | #else
|
---|
| 126 | static uint32_t mask[4] = { 0x00000000, 0x000000ff, 0x0000ffff, 0x00ffffff };
|
---|
| 127 | static uint32_t bits[4] = { 0x00000080, 0x00008000, 0x00800000, 0x80000000 };
|
---|
| 128 | #endif
|
---|
| 129 |
|
---|
| 130 | uint8_t *hval = resbuf;
|
---|
| 131 | uint32_t i, cnt = (uint32_t) (ctx->count[0] & SHA1_MASK);
|
---|
| 132 |
|
---|
| 133 | /* mask out the rest of any partial 32-bit word and then set */
|
---|
| 134 | /* the next byte to 0x80. On big-endian machines any bytes in */
|
---|
| 135 | /* the buffer will be at the top end of 32 bit words, on little */
|
---|
| 136 | /* endian machines they will be at the bottom. Hence the AND */
|
---|
| 137 | /* and OR masks above are reversed for little endian systems */
|
---|
| 138 | ctx->wbuf[cnt >> 2] =
|
---|
| 139 | (ctx->wbuf[cnt >> 2] & mask[cnt & 3]) | bits[cnt & 3];
|
---|
| 140 |
|
---|
| 141 | /* we need 9 or more empty positions, one for the padding byte */
|
---|
| 142 | /* (above) and eight for the length count. If there is not */
|
---|
| 143 | /* enough space pad and empty the buffer */
|
---|
| 144 | if (cnt > SHA1_BLOCK_SIZE - 9) {
|
---|
| 145 | if (cnt < 60)
|
---|
| 146 | ctx->wbuf[15] = 0;
|
---|
| 147 | sha1_compile(ctx);
|
---|
| 148 | cnt = 0;
|
---|
| 149 | } else /* compute a word index for the empty buffer positions */
|
---|
| 150 | cnt = (cnt >> 2) + 1;
|
---|
| 151 |
|
---|
| 152 | while (cnt < 14) /* and zero pad all but last two positions */
|
---|
| 153 | ctx->wbuf[cnt++] = 0;
|
---|
| 154 |
|
---|
| 155 | /* assemble the eight byte counter in the buffer in big-endian */
|
---|
[1765] | 156 | /* format */
|
---|
[821] | 157 |
|
---|
| 158 | ctx->wbuf[14] = htonl((ctx->count[1] << 3) | (ctx->count[0] >> 29));
|
---|
| 159 | ctx->wbuf[15] = htonl(ctx->count[0] << 3);
|
---|
| 160 |
|
---|
| 161 | sha1_compile(ctx);
|
---|
| 162 |
|
---|
| 163 | /* extract the hash value as bytes in case the hash buffer is */
|
---|
| 164 | /* misaligned for 32-bit words */
|
---|
| 165 |
|
---|
| 166 | for (i = 0; i < SHA1_DIGEST_SIZE; ++i)
|
---|
| 167 | hval[i] = (unsigned char) (ctx->hash[i >> 2] >> 8 * (~i & 3));
|
---|
[1765] | 168 |
|
---|
[821] | 169 | return resbuf;
|
---|
| 170 | }
|
---|