{5} Assigned, Active Tickets by Owner (Full Description) (65 matches)

List tickets assigned, group by ticket owner. This report demonstrates the use of full-row display.

Bruno Cornec (65 matches)

Ticket Summary Component Milestone Type Severity Created
Description
#1 sprintf used without checks mondo 3.3.1 defect normal 18 years ago

reported by Yann Aubert (<technique_at_alixen.fr>):
many sprintf in mondo code are used without checks and may lead to seg. fault (ex: -E with a long list of excluded directories)

#36 mondoarchive should use an FHS-compliant location mondo 4.0.1 enhancement major 18 years ago

for storing scratch and temporary data and both archive and boot images (see also Mondorescue wiki:StandardsCompliance)

#40 have a live CD including mondo rescue mondo 4.0.2 enhancement normal 18 years ago

This will allow backing up systems offline as well as backing up Window based systems.

#69 mondoarchive NFS does not work with zeroconf installed mondo 4.0.2 defect normal 18 years ago

zeroconf (www.zeroconf.org) apparently adds an IP address from the 169.254.0.0/16 range to an interface. So, with zeroconf installed I get the following outout from 'ip addr': 

1: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:11:d8:50:e0:80 brd ff:ff:ff:ff:ff:ff
    inet 169.254.134.104/16 brd 169.254.255.255 scope link eth0
    inet 192.168.1.213/24 brd 192.168.1.255 scope global eth0
    inet6 fe80::211:d8ff:fe50:e080/64 scope link
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    link/ieee1394 00:e0:18:00:00:ce:cf:54 brd ff:ff:ff:ff:ff:ff:ff:ff
4: sit0: <NOARP> mtu 1480 qdisc noop
    link/sit 0.0.0.0 brd 0.0.0.0

The interesting one here is 2: The 192.168.1.213 address is what is configured as a static address. 169.254.134.104 is what zeroconf adds.

Networking in general works fine with this. However, mondoarchive uses ifconfig to obtain the IP address for the NFS config. 'ifconfig' gives: 

eth0      Link encap:Ethernet  HWaddr 00:11:D8:50:E0:80
          inet addr:169.254.134.104  Bcast:169.254.255.255  Mask:255.255.0.0
          inet6 addr: fe80::211:d8ff:fe50:e080/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:13785 errors:0 dropped:0 overruns:0 frame:0
          TX packets:10514 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:17528791 (16.7 MiB)  TX bytes:977510 (954.5 KiB)
          Interrupt:177

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:358 errors:0 dropped:0 overruns:0 frame:0
          TX packets:358 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:20284 (19.8 KiB)  TX bytes:20284 (19.8 KiB)

which means it only gives the IP address configured by zeroconf. And that address is what is using during restore and of course doesn't work.

I am not 100% sure what to do here but don't think it is super urgent. I mainly wanted it documented somewhere - maybe we should also put it in the wiki ?

One interesting comment I saw is that apparently ifconfig is getting superseded by the ip command. Maybe we need at some stage replace ifconfig with ip.

Cheers, Andree

#83 Create a package hierarchy to ease installation mondo 4.0.2 defect normal 18 years ago

Create new packages to help deploy mondo. Cf DistributionPackaging

#85 abandoned files mondo 4.0.2 defect minor 18 years ago

On Suse 10.1 kernel 2.6.xxx using switches -S /tmp -T /tmp the following directories get orphaned in /tmp

cd.xxxx

mondo.scratch.xxxx

tmp.mondo.xxxx

On RH9 not using those switches the diretories are not left behind.

#86 graphic tape issue and text progress indicator mondo 4.0.2 defect minor 18 years ago

Ver 2.09 I noticed that when verifying biggie files in graphic mode the progress tape never goes over 1%.

#91 Error message goes to console, but not to log mondo 4.0.2 defect normal 17 years ago

During diagnosis of a different problem, I was presented with an on-screen (console) message reading, in part...

sh: -c: line 0: syntax error near unexpected token `(' sh: -c: line 0: `mkisofs -no-emul-boot -b isolinux.bin -boot-load-size 4 -boot-info-table -c boot.cat -o /backupMondo- (test) -Birch-061025@… -J -r -p MondoRescue -publisher www.mondorescue.org -A Mondo_Rescue_GPL -V 1 . >> /var/log/mondo-archive.log 2>> /var/log/mondo-archive.log' Call to mkisofs to make ISO (ISO #1) ...failed ---promptdialogYN---1--- Failed to burn ISO #1. Retry?

However, these error messages didn't appear in the log. When I submitted the information to the mondo-devel list, I included both the (compressed) lot, and this snapshot of the screen (above).

It might be useful to make sure all error messages are echoed to the log, so sending you that log would be adequate for your further investigation.

#95 Physical extent size for volume group isn't preserved mondo 4.0.0 defect minor 17 years ago

The physical extent size for volume group isn't preserved but set to the default of 32MB. Not that it's a problem, just a note. (From "Chua, Alfred" <alfred.chua_at_hp.com>)

#104 Mondoarchive segfaults when encoutering deep filesystem arborescence mondo defect normal 17 years ago

I got a segfault in mondoarchive during the catalog make stage, when trying to archive an EXT3 filesystem with a really really deep arborescence (consecutively to a scp or tar - I don't remember - of a dumb directory with a stupid symbolic link of the '.' file). After removing this arborescence, the process goes fine.

#109 add a timestamp to the logfiles name mondo 4.0.2 enhancement minor 17 years ago

It would be nice if you could add a timestamp to the filename of the logfile. So you wouldn't override the previous logfile and bugtracking would be easier.

#118 In compare mode allow mountlist changes before operation mondo 4.0.2 enhancement normal 17 years ago

During the compare operation, mondorescue only uses the mountlist from the source system. If the target system does not have the same mountlist, compare will failed. The proposal is to add an interactive mode to change the mountlist before doing the compare operation.

#125 Add option for suppress of evalcall and progress-form mondo enhancement minor 17 years ago

I'm running mondoarchive from cron. The output from cron is sent as email to the local root account. This size of this output is often larger than 1MB due to a large number of lines starting with "---evalcall---" or "---progress-form---". I suggest the addition of an option that suppresses these messages (i.e. 'non-interactive mode'). 

# /usr/sbin/mondoarchive --version
mondoarchive v2.0.9-780
$ uname -a
Linux mylinux 2.6.9-42.0.3.EL # 1 Fri Oct 6 05:59:54 CDT 2006 i686 i686 i386 GNU/Linux

Thanks for the great software Bruno.

Best regards, Andreas --

#149 mondorestore should use efibootmgr to recreate menu entries on ia64 mondo 3.3.1 enhancement normal 17 years ago

mondorestore should use efibootmgr to recreate menu entries on ia64. Without that it's actually difficult to know nd find on which device the system should boot.

#152 Bootable USB that backs up to DVDs mindi 4.0.0 enhancement normal 17 years ago

I am requesting the following enhancements to Mondo/Mindi:

A live CD (or other method of creating this) that would scan the system for necessary drivers and such to create a custom, bootable USB disk with the necessary drivers for the DVD burner, etc. The USB disk would contain a backup-to-DVD solution that created a backup and burned bootable DVDs (DVDs just like Mondo's current DVD backups).

Just to be clear: I do not want to back up files to the USB drive -- I want to BOOT from the USB and burn backups to DVDs.

#167 VxFS support mondo defect normal 17 years ago
  • mondo doesn't support VxFS.

More over, ran on a system with VxFS FS it umounts those FS at the end of the run, which it shouldn't.

#168 Make ALL kernel modules be visible during restore mondo 4.0.2 enhancement normal 17 years ago

When restoring to a hardware setup different than the original (i.e. different RAID/SATA adapter) you can be caught in a catch22 situation wherer you can NOT load the needed kernel modules because mondo/mindi did NOT put ALL OF THEM on the bootable portion of the image. the only current solution is to KNOW the drivers needed BEFORE the mondoarchive (backup) is even done so that they can be "modprobed" into memory so that mondo/mindi makes surethey are available.

A more appropriate and correct solution would be to have the ENTIRE kernel modules tree be accessible after booting in rescue mode (i.e. on new hardware). in case hardwaredetection fails (which it does if the disk controller driver is different from the original system), one could then have access to the ENTIRE kernel modules tree to be able to load up the proper driver and continue the restore.

If it's not possible to stick it in the bootable section of the image (due to space) it SHOULD be possible to take the kernel modules tree and create that as an ISO on the C and make that loop mountable as needed.

I got hit by this bug/defect/limitation, when designing a customer solution in a virtual environment and tried to transfer it over to real physical hardware, it had NO DRIVERS avail (no complete kernel modules tree), which resulting in me having to manually load the drivers in the virtual side before mondo-archiving so that they'd be available when booting the physical machine, but this was a hack and wasted numerous hours to get around a deficiency that should never have been present IMHO.

#183 LVM restore incorrect when cloning mondo 4.0.0 enhancement major 17 years ago

When cloning and using a different HDD, LVM is not restored correctly as there is a need to change i-want-my-lvm on the fly. The only working solution for now is to edit it separately, run all the commands having a '#' at the begining, and relaunch mondorestore, without partitioning the disk.

2 potential ideas: 1/ propose to edit i-want-my-lvm (short term) 2/ automatically change the value for the disk, if it is changed by the user.

#198 Wrong ext3 block size after restore mondo 4.0.0 defect normal 17 years ago

When I restore a backup to a new hard disk and let Mondo do the partioning and formatting, it uses 1024 as ext3 block size, but the original hard disk had 4096.

#202 Backup of partition larger than local tmp and scratch space mondo 4.0.0 enhancement blocker 17 years ago

Hi,

I am using mondorescue for some time without any problems for backups and replication of local linux machines, thank you very much! However, now that the time has come to backup the laptop of my boss, problem appeared :(

I think I know what is causing it: I am trying to backup several partitions with the overall data size of approx. 80 GB to an NFS mount, but locally there is just 9 GB for scratch and tmp, and it seems that mondorescue wrongly checks if the partition on which tmp and scratch space are has enough space to store the whole amount of data that is being backed up.

Details: laptop has windows NTFS partition of 75 GB, and SuSE linux is installed on the rest of HDD, with 9 GB of empty space on Linux. Backup is done to an NFS mount. If windows partition is not backed up, no problems (i.e. small linux partition can be backed up successfully). If windows partition is included (-x /dev/sda2), I get "/dev/sda2: no such file" after I see in the log file that the number of slices is correctly calculated for /dev/sda2. This is misleading message and should be fixed (not enough space is more appropriate, although also not correct).

However, if I set scratch (-S) and tmp (-T) directory to be on the NFS mount (the same used for storing the backup iso images), then everything works, since on NFS mount there is enough space (200 GB+), wile on the local disk there is just 9 GB of free space. Of course, this is _very_ slow (15+ hours estimated), and in practice not feasible.

Now, I have verified that (with the size of iso images not specified, defaulting to CD size) tmp directory on NFS mount never grows over 150-170 MB, and scratch directory on NFS mount never over 650 MB (of course), which means that local scratch and tmp can be used easily, but for some reason mondorescue fails to realize that and gives up (this happens after backup of linux partitions is finished, at the start of the backup of windows partition as biggiefile).

Do you have any ideas how to easily fix this? Versions used:

mondo-2.2.4-1.suse10.2.i586.rpm mindi-busybox-1.2.2-3.suse10.2.i586.rpm mindi-1.2.4-1.suse10.2.i586.rpm

Thanks, Antun Balaz antun@…

#213 XFS volumes with external log could not be mounted during restore mondo 4.0.0 defect normal 16 years ago

As requested by Bruno in his reply to my posting in the Mondo mailing list with the same subject I fill a new ticket here:

On my Debian system I run some lvm volumes with xfs filesystem and external logging.

As I tried as a first step to compare the backup using the created CD image, Mondo Restore stoped because it could not mount the volumes which uses the external logging. The log-file shows, that Mondo tries to mount the volumes without the option for the external log.

I schould attach the logfiles here but I don't find the option to do so in the moment. Hope I can attach them later...

Greats Harald

#230 allow exclusion of files mondo 4.0.0 defect normal 16 years ago

When dealing with very large files useless in a backup (aka a 22GB swap file e.g.) allow for their exclusion with -E or something similar.

#231 mondorescue: Storage Dir form input limited to 51 characters mondo 4.0.0 defect minor 16 years ago

In the mondorestore application under the "Storage Dir" form, the text entry for inputting the path to your ISO files seems to be limited to 51 characters. This is arrived via the following:

Run mondorestore select OK Select "Hard disk"

The form with the information:

Storage dir.

Please enter the full path name to the directory for your ISO images. Example: /mnt/raid0_0

is presented to the user, in the text input box I try to add a path greater than 51 characters and am not able to do so, The path gets truncated.

This is with version 2.2.4.

Best Regards, Bill

#232 Owner of symbolic links is not restored correctly. mondo defect normal 16 years ago

I have restored RHEL5.1 with mondo-2.2.4-1.rhel5 and compared "rpm -Va" results taken before and after the restoration. And I found that ower user and group of symbolic links originally different from root.root was changed to root.root. 

# diff node01.2008011663155/rpm-Va node01.2008011684617/rpm-Va
1218a1219,1225
> .....UG.   /usr/bin/rpmdb
> .....UG.   /usr/bin/rpmquery
> .....UG.   /usr/bin/rpmsign
> .....UG.   /usr/bin/rpmverify
> .....UG.   /usr/lib/rpm/rpme
> .....UG.   /usr/lib/rpm/rpmu
> .....UG.   /usr/lib/rpm/rpmv

These are all symbolic links to another file, for example; 

<Original>
# ls -l /usr/bin/rpmdb
lrwxrwxrwx 1 rpm rpm 15 Jan 16 17:29 /usr/bin/rpmdb -> ../lib/rpm/rpmd

<After Restoration>
# ls -l /usr/bin/rpmdb
lrwxrwxrwx 1 root root 15 Jan 16 17:29 /usr/bin/rpmdb -> ../lib/rpm/rpmd

As owners of linked "real" files were not modified, there's probably no practical issue. But I think, if possible, it's better to fix it. (Sorry for that I have no idea how to fix it.)

RPMs I used are as below; 

afio-2.4.7-1.x86_64.rpm
buffer-1.19-1.x86_64.rpm
mindi-1.2.4-1.rhel5.x86_64.rpm
mindi-busybox-1.2.2-3.rhel5.x86_64.rpm
mondo-2.2.4-1.rhel5.x86_64.rpm
#267 UIDs / GIDs not enough bits mondo 4.0.0 defect normal 16 years ago

user with uid 98765 becomes user 33229 after mondo restore.

98765 - 33229 = 65536. Integer Overflow.

This is on RedHat 5 (32 bit) on VMware ESX 3.0.2. with mindi 2.0.1.

#272 mondo should support other type of NICs mondo 4.0.0 defect normal 16 years ago

mondo should support other type of NICs such as xenbrxx, vlanxx, ...

#276 Adds full OCFS2 support mondo defect normal 16 years ago

Adds full OCFS2 support in order to be able to backup/restore RAC configurations.

#279 Mondorestore interactive mode restores uselss empty dirs mondo defect normal 16 years ago

t also restores a few other empty directories which weren't selected in the file list. They seem to be consistent, in that I've done it twice and it restored the same 3 empty directories (note that they weren't empty on the original system). Since no unwanted files from those directories were restored I suppose that it's not really a big problem, but it is odd.

The unwanted directories restored in addition to what I asked for were: 

/home/vpopmail/domains/ticgroup.com.au/bud.growcott/Maildir/.Pallet control/cur
/tmp
/var/lib/mysql

I've noticed that they seem to be coming from the biggiefiles section even though they weren't selected. 

Done.
Reassembling large files      
	[Main] mondorestore.c->restore_all_biggiefiles_from_stream#2397: OK, there are 5 biggiefiles in the archives
[Main] mondorestore.c->restore_a_biggiefile_from_stream#1395: /home/vpopmail/domains/ticgroup.com.au/bud.growcott/Maildir/.Pallet control/cur/1140740942.3798_596.rlo.com.au,S=86071333:2, --- pih=NO
[Main] mondorestore.c->restore_a_biggiefile_from_stream#1418: Skipping /home/vpopmail/domains/ticgroup.com.au/bud.growcott/Maildir/.Pallet control/cur/1140740942.3798_596.rlo.com.au,S=86071333:2, (name isn't in biggielist subset)
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1481: Reassembling big file 1 (/home/vpopmail/domains/ticgroup.com.au/bud.growcott/Maildir/.Pallet control/cur/1140740942.3798_596.rlo.com.au,S=86071333:2,)
		[Main] mondorestore.c->restore_a_biggiefile_from_stream#1501: Pipe command = 'cat > "/dev/null"'
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #1, slice #0    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #1, slice #1    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #1, slice #2    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #1, slice #3    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #1, slice #4    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #1, slice #5    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #1, slice #6    
[Main] mondorestore.c->restore_a_biggiefile_from_stream#1561: pathname_of_last_file_restored is now 
		[Main] mondorestore.c->restore_a_biggiefile_from_stream#1573: biggiestruct.filename = /home/vpopmail/domains/ticgroup.com.au/bud.growcott/Maildir/.Pallet control/cur/1140740942.3798_596.rlo.com.au,S=86071333:2,
		[Main] mondorestore.c->restore_a_biggiefile_from_stream#1574: biggiestruct.checksum = 931bcc31faaebc228109f8f78c95f201
[Main] mondorestore.c->restore_all_biggiefiles_from_stream#2430: I believe I have restored 
[Main] mondorestore.c->restore_a_biggiefile_from_stream#1395: /home/vpopmail/domains/ticgroup.com.au/bud.growcott/Maildir/.Pallet control/cur/1140741010.3798_597.rlo.com.au,S=86075819:2, --- pih=NO
[Main] mondorestore.c->restore_a_biggiefile_from_stream#1418: Skipping /home/vpopmail/domains/ticgroup.com.au/bud.growcott/Maildir/.Pallet control/cur/1140741010.3798_597.rlo.com.au,S=86075819:2, (name isn't in biggielist subset)
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1481: Reassembling big file 2 (/home/vpopmail/domains/ticgroup.com.au/bud.growcott/Maildir/.Pallet control/cur/1140741010.3798_597.rlo.com.au,S=86075819:2,)
		[Main] mondorestore.c->restore_a_biggiefile_from_stream#1501: Pipe command = 'cat > "/dev/null"'
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #2, slice #0    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #2, slice #1    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #2, slice #2    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #2, slice #3    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #2, slice #4    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #2, slice #5    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #2, slice #6    
[Main] mondorestore.c->restore_a_biggiefile_from_stream#1561: pathname_of_last_file_restored is now 
		[Main] mondorestore.c->restore_a_biggiefile_from_stream#1573: biggiestruct.filename = /home/vpopmail/domains/ticgroup.com.au/bud.growcott/Maildir/.Pallet control/cur/1140741010.3798_597.rlo.com.au,S=86075819:2,
		[Main] mondorestore.c->restore_a_biggiefile_from_stream#1574: biggiestruct.checksum = f9ba3e4c5d6b8daf10d5c47d4fcedc78
[Main] mondorestore.c->restore_all_biggiefiles_from_stream#2430: I believe I have restored 
[Main] mondorestore.c->restore_a_biggiefile_from_stream#1395: /home/vpopmail/domains/ticgroup.com.au/sapsupport.tar.gz --- pih=NO
[Main] mondorestore.c->restore_a_biggiefile_from_stream#1418: Skipping /home/vpopmail/domains/ticgroup.com.au/sapsupport.tar.gz (name isn't in biggielist subset)
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1481: Reassembling big file 3 (/home/vpopmail/domains/ticgroup.com.au/sapsupport.tar.gz)
		[Main] mondorestore.c->restore_a_biggiefile_from_stream#1501: Pipe command = 'cat > "/dev/null"'
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #3, slice #0    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #3, slice #1    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #3, slice #2    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #3, slice #3    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #3, slice #4    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #3, slice #5    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #3, slice #6    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #3, slice #7    
[Main] mondorestore.c->restore_a_biggiefile_from_stream#1561: pathname_of_last_file_restored is now 
		[Main] mondorestore.c->restore_a_biggiefile_from_stream#1573: biggiestruct.filename = /home/vpopmail/domains/ticgroup.com.au/sapsupport.tar.gz
		[Main] mondorestore.c->restore_a_biggiefile_from_stream#1574: biggiestruct.checksum = 1e4aa002fbebb935d4a185d708782b51
[Main] mondorestore.c->restore_all_biggiefiles_from_stream#2430: I believe I have restored 
[Main] mondorestore.c->restore_a_biggiefile_from_stream#1395: /tmp/selected-files.txt --- pih=NO
[Main] mondorestore.c->restore_a_biggiefile_from_stream#1418: Skipping /tmp/selected-files.txt (name isn't in biggielist subset)
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1481: Reassembling big file 4 (/tmp/selected-files.txt)
		[Main] mondorestore.c->restore_a_biggiefile_from_stream#1501: Pipe command = 'cat > "/dev/null"'
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #4, slice #0    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #4, slice #1    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #4, slice #2    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #4, slice #3    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #4, slice #4    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #4, slice #5    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #4, slice #6    
[Main] mondorestore.c->restore_a_biggiefile_from_stream#1561: pathname_of_last_file_restored is now 
		[Main] mondorestore.c->restore_a_biggiefile_from_stream#1573: biggiestruct.filename = /tmp/selected-files.txt
		[Main] mondorestore.c->restore_a_biggiefile_from_stream#1574: biggiestruct.checksum = 841aec6a37f6d2d2b9991eb31f9f6fd2
[Main] mondorestore.c->restore_all_biggiefiles_from_stream#2430: I believe I have restored 
[Main] mondorestore.c->restore_a_biggiefile_from_stream#1395: /var/lib/mysql/ibdata1 --- pih=NO
[Main] mondorestore.c->restore_a_biggiefile_from_stream#1418: Skipping /var/lib/mysql/ibdata1 (name isn't in biggielist subset)
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1481: Reassembling big file 5 (/var/lib/mysql/ibdata1)
		[Main] mondorestore.c->restore_a_biggiefile_from_stream#1501: Pipe command = 'cat > "/dev/null"'
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #5, slice #0    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #5, slice #1    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #5, slice #2    
[...]	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #5, slice #3184    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #5, slice #3185    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #5, slice #3186    
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #5, slice #3187    
update_progress_form_full(      I am now reassembling all the large files.     ,Working on file #5, slice #3187,         Please wait. This may take some time.       ) --- g_current_progress=3216; g_maximum_progress=3215
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #5, slice #3188    
update_progress_form_full(      I am now reassembling all the large files.     ,Working on file #5, slice #3188,         Please wait. This may take some time.       ) --- g_current_progress=3216; g_maximum_progress=3215
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #5, slice #3189    
update_progress_form_full(      I am now reassembling all the large files.     ,Working on file #5, slice #3189,         Please wait. This may take some time.       ) --- g_current_progress=3216; g_maximum_progress=3215
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #5, slice #3190    
update_progress_form_full(      I am now reassembling all the large files.     ,Working on file #5, slice #3190,         Please wait. This may take some time.       ) --- g_current_progress=3216; g_maximum_progress=3215
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #5, slice #3191    
update_progress_form_full(      I am now reassembling all the large files.     ,Working on file #5, slice #3191,         Please wait. This may take some time.       ) --- g_current_progress=3216; g_maximum_progress=3215
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #5, slice #3192    
update_progress_form_full(      I am now reassembling all the large files.     ,Working on file #5, slice #3192,         Please wait. This may take some time.       ) --- g_current_progress=3216; g_maximum_progress=3215
	[Main] mondorestore.c->restore_a_biggiefile_from_stream#1515: Working on file #5, slice #3193    
update_progress_form_full(      I am now reassembling all the large files.     ,Working on file #5, slice #3193,         Please wait. This may take some time.       ) --- g_current_progress=3216; g_maximum_progress=3215
[Main] mondorestore.c->restore_a_biggiefile_from_stream#1561: pathname_of_last_file_restored is now 
		[Main] mondorestore.c->restore_a_biggiefile_from_stream#1573: biggiestruct.filename = /var/lib/mysql/ibdata1
		[Main] mondorestore.c->restore_a_biggiefile_from_stream#1574: biggiestruct.checksum = 78161e8cd4e70e2c30ae89e5070f4ac0
[Main] mondorestore.c->restore_all_biggiefiles_from_stream#2430: I believe I have restored 
[Main] mondorestore.c->restore_all_biggiefiles_from_stream#2447: 5 biggiefiles in biggielist.txt; 5 biggiefiles processed today.
	[Main] mondorestore.c->restore_all_biggiefiles_from_stream#2470: mondorestore.c, restore_all_biggiefiles_from_stream, 2470: No biggiefiles selected. So, no biggie-EXATs to set.
Done.
	[Main] libmondo-stream.c->closein_tape#120: closein_tape() -- entering
	[Main] libmondo-stream.c->closein_tape#138: closein_tape() -- leaving
running: mt -f /dev/st0 offline > /storage/mondo.tmp.MXRHQj/mondo-run-prog-thing.tmp 2> /storage/mondo.tmp.MXRHQj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
		[Main] libmondo-devices.c->eject_device#235: Ejecting /dev/st0
running: eject /dev/st0 > /storage/mondo.tmp.MXRHQj/mondo-run-prog-thing.tmp 2> /storage/mondo.tmp.MXRHQj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
	[Main] libmondo-files.c->length_of_file#611: filename=/etc/raidtab
Unable to openin filename (No such file or directory)
running: ps  | grep " petris " | awk '{print $1;}' | grep -v "grep" > /storage/mondo.tmp.MXRHQj/mondo-run-prog-thing.tmp 2> /storage/mondo.tmp.MXRHQj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran with res=256
running: kill `ps  | grep " petris " | awk '{print $1;}' | grep -v "grep"` > /storage/mondo.tmp.MXRHQj/mondo-run-prog-thing.tmp 2> /storage/mondo.tmp.MXRHQj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
kill: usage: kill [-s sigspec | -n signum | -sigspec] [pid | job]... or kill -l [sigspec]
--------------------------------end of output------------------------------
...ran with res=256
	[Main] mondorestore.c->restore_everything#2716: restore_everything() --- leaving
Freeing memory formerly occupied by filelist
	[Main] libmondo-filelist.c->free_filelist#429: Finished freeing memory
	[Main] mondorestore.c->restore_to_live_filesystem#974: Tape : I don't need to unmount or eject the CD-ROM.
running: umount /mnt/cdrom > /storage/mondo.tmp.MXRHQj/mondo-run-prog-thing.tmp 2> /storage/mondo.tmp.MXRHQj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
umount: /mnt/cdrom: not mounted
--------------------------------end of output------------------------------
...ran with res=256
running: mt -f /dev/st0 offline > /storage/mondo.tmp.MXRHQj/mondo-run-prog-thing.tmp 2> /storage/mondo.tmp.MXRHQj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
/dev/st0: Input/output error
--------------------------------end of output------------------------------
...ran with res=256
		[Main] libmondo-devices.c->eject_device#235: Ejecting /dev/st0
running: eject /dev/st0 > /storage/mondo.tmp.MXRHQj/mondo-run-prog-thing.tmp 2> /storage/mondo.tmp.MXRHQj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
	[Main] mondorestore.c->main#3194: Still here. Yay.
running: rm -Rf /storage/mondo.tmp.MXRHQj/* > /storage/mondo.tmp.MXRHQj/mondo-run-prog-thing.tmp 2> /storage/mondo.tmp.MXRHQj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
		[Main] libmondo-tools.c->unmount_boot_if_necessary#1309: starting
		[Main] libmondo-tools.c->unmount_boot_if_necessary#1316: leaving
	[Main] libmondo-files.c->register_pid#815: Unregistering PID
running: umount /mnt/cdrom > /storage/mondo.tmp.MXRHQj/mondo-run-prog-thing.tmp 2> /storage/mondo.tmp.MXRHQj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
umount: /mnt/cdrom: not mounted
--------------------------------end of output------------------------------
...ran with res=256
[Main] newt-specific.c->finish#406: Calling newtSuspend()
#280 Unable to backup to multiple tapes mondo defect normal 16 years ago

I'm running the currently latest release for debian amd64 from ftp.mondorescue.org. I'm running Debian stable. I have tried the version available in Debian stable repository, same/similar error.

When backing up to more than 1 tape, the backup runs nicely, but when it verifies, it stops, just after starting the new tape. I get the same error if I try to restore from tape 2.

I have an IBM LTO Ultrium 2 drive.

#301 Add EMC Powerpathed boot from SAN support mondo defect normal 15 years ago

Has anyone tried using Mondo with EMC Powerpathed boot from SAN drives? It works fine with boot from SAN drives, that are not running powerpath or mpxio.

#303 create a mondoarchive on an automounted nfs share without mounting first mondo enhancement normal 15 years ago

I want to use the "-n" option with mondoarchive, to write to an automounted nfs share. For instance, we have have a NAS appliance called pisrh11, which has space carved up for nfs shares. On our servers, we are using the automounter, which automatically maps shares on pishr11, based on entries in the /etc/auto_* files.

Here would be the automount file for application installed locally: 

# more /etc/auto_apps
TRPperf		-rw	localhost:/export/appl/pkgs/&
pb              -rw     localhost:/opt/&   # PowerBroker
java            -rw     localhost:/export/appl/pkgs/&
AppManager      -rw     localhost:/export/appl/pkgs/AppManager/v8

Here is the master automount file which points to some NIS maps: 

# more /etc/auto_master
/trprmt/logs    yp:auto.trprmt
/nfs            yp:auto.nfs
/apps		/etc/auto_apps

And here is the NIS entry for the mondoarchive shares: 

# ypcat auto.nfs|grep Linux
-soft,bg,rw		pishr:/images_Linux/trp
-soft,bg,rw		pishr11:/images_Linux/trp

Here is the share mounted: 

# pwd
/root
(piadm41)# cd /nfs/LinuxImages
(piadm41)# pwd
/nfs/LinuxImages
(piadm41)# df -k .
Filesystem           1K-blocks      Used Available Use% Mounted on
pishr:/images_Linux/trp
                     103257600   3244608 100012992   4% /nfs/LinuxImages
(piadm41)# mount|grep Linux
pishr:/images_Linux/trp on /nfs/LinuxImages type nfs (rw,soft,addr=10.22.214.26)

Thanks again.

#338 restore problem mondo defect blocker 15 years ago

Hello, i'm using sles 10 sp2 x62_64 with mondo 2.2.8-1.

The archive prozess running fine, but when i start restore on the same Hardware he stops every time at the same position. He can't configure the harddisks/raids. When i look of the partition with fdisk after mondo stops it looks not nice ( see fdisk.jpg ). I see on device /dev/cciss/c0d1p2 start and end cylinder at 1. The orignal system have no second partion on this device( see fdisk_original.jpg ).

#349 error message on screen mondo defect normal 15 years ago

while running mondoarchive I noticed this error. 

---evalcall---E---
---evalcall---1---        Making catalog of /home
---evalcall---2--- TASK:  [*********...........]  44% done;  0:06 to go
---evalcall---E---
sh: -c: line 0: unexpected EOF while looking for matching `''
sh: -c: line 1: syntax error: unexpected end of file
---evalcall---1---        Making catalog of /home
---evalcall---2--- TASK:  [***********.........]  53% done;  0:05 to go
---evalcall---E---

It may be due to this:

Under .java/.userprefs there were directories like below:

I deleted them and mondo ran OK. 

~/.java/.userPrefs/_!'8!cg"n!#4!b@"v!(}=> ls
_!'0!}@"4!&8!d@"z!'`!cg"f!'k!bg"0!'`!cg"m!'%!}w"l
_!'0!a@"u!&8!d@"z!'`!cg"f!'k!bg"0!'`!cg"m!'%!}w"l
_!'0!}@"j!()!bw"z!&8!a@"u!'}!bw==
cache
display
_!(%!d@"v!(@!~@"f!(:!bw"1!()!}w"l
equations
_!'k!~!"f!(%!d@"v!(@!~@"f!(:!e@"u!':=
language
license
macros
_!'@!~@"m!'%!d@"s!(@!|w"j!'g!}@"y!(@!|w"k!'`!~g"h!(`!b!"0!(:=
portfolio
prefs
prefs.xml
proxy
watchscreens
#350 Screenshots in documetation are illegible mondo-doc defect normal 15 years ago

Documentation screenshots are illegible, for example ​Chapter 2. Quickstart shows a 160x96 pixel image.

Using mini images is fine for the HTML online version (which hyperlink to full size screenshots), but the PDF and postscript versions should include the full resolution images rather than the mini ones.

#351 mondoarchive and exclude list problem mondo defect normal 15 years ago

Hey, I noticed that even if mondoarchive is running with exclude to some directories and exclude the NFS file systems, when the mondo is making the catalog, he is 'lstat'ing ALL the files including those to be excluded later.

The problem is that we have servers with NFS mount point that holds millions of millions of files and the lstat is taking too long ( + making the NFS server work very hard).

Is it possible somehow to change this behavior ?

#378 making mondo archives from a live USB mondo 4.0.2 defect normal 14 years ago

I'm having troubles running Mondoarchive and Mindi on Ubuntu 9.10 64-bit using either versions from the repositories or versions from the website. I gather I could recompile a kernel to get it running, as I keep getting a FATAL ERROR: Libata module not found message. I suppose I could also find a version of the mindi-kernel to try to use the failsafe kernel, but it's not readily available without a lot of digging and searching.

Right now, I'm figuring that it might just be easier to install a different, earlier version of Ubuntu on a separate partition, for the sole purpose of making mondoarchives. I can't see why this won't work.

But it occurred to me that it might be possible to make a live USB Mondo Rescue linux version, which would allow people with insane kernels to make backups readily. I searched around through versions of DSL and others to see if this was something that had been done before, but couldn't find anything.

Can anyone see any major problems with this approach? I'm a relative newbie with big gaps in my general knowledge, although not scared of reading howtos or using the command line if that seems the easiest way to do something.

Thanks for any input that anyone can provide.

#386 Automagically toggle the -z flag when SELinux is on mondo enhancement normal 14 years ago

mondoarchive could indeed Automagically toggle the -z flag when SELinux is on.

#387 Backup with SELINUX=permissive may result to restore errors due to /proc & /sys extended attributes mondo 3.0.5 defect normal 14 years ago


This defect was observed on 2.2.9.2 (RHEL5.4). It should be the same on other distro though.

The following errors are encountered when trying to restore the backup:

setfattr: proc: Operation not supported
setfattr: sys: Operation not supported

Due to that, the GUI restore phase does not seem to finalize properly for a lambda end-user (even if it may have no other impacts).

It has been observed in the filelist-7 that /proc and /sys were backed-up with the following xattr:

# file: proc
security.selinux=0x73797374656d5f753a6f626a6563745f723a70726f635f743a733000
===
# file: sys
security.selinux=0x73797374656d5f753a6f626a6563745f723a73797366735f743a733000

Even if /proc and /sys sub-files/sub-dirs are not backed-up, we should also fully remove /proc and /sys from the backup. I guess removing it from the backup would avoid that kind of issue at restore time.

Note that the WA to set -E "/proc /sys" to exclude them did not work for me.

#394 post= option not working mondo 3.0.5 defect normal 14 years ago

It seems that the post option is not invoked correctly when used, whereas the pre= option is. To be checked closely.

#403 mondo ignore non system partitions mondo 4.0.0 defect normal 14 years ago

Hello,

I have system, which contains non standard filesystem partitions (informix data parts). Mondo can't backup them (ofcourse), he ignores them. When I want to clone system, he don't know about these partitions and I have to make them by hand. When cloning multiple machines, it is annoying. I resolved this by saving (sfdisk -d) for all drives in system, and in modified post-init, if they didn't match current setup, I ask to repartition them. I wish mondo can parttion them in the same fashion.

Moreover, it is philosophical that mondo should include two basic modes: restore to original system and clone system. In restore original, the system ramdisk & bootup process could be used to ensure correct module & device initialization, repartition drives to same configuration with NO questions :). In clone mode, there could be that nice features like inserting all modules, mountlist resizing and checking, many questions etc.

Thanks

running OpenSuse 11.1 & 11.2 64

#406 persistent devices and naming by id mondo enhancement normal 14 years ago

While backup, mondo should remember kernel node to /dev/disk/by-id mapping, and after restore automatically modify settings in /etc/fstab /boot/grub/menu.lst /boot/grub/device.map /etc/grub.conf

Also, the /etc/udev/rules.d/70-persistent-net.rules /etc/udev/rules.d/70-persistent-cd.rules should be removed to prevent system to create shifted dev names. (eg. eth0 directly mapped to mac)

And small one at the end, mondo scratch dirs aren't removed from backup.

#423 Compare mode in mondoarchive doesn't work with -d option correctly. mondo defect normal 14 years ago

When using 

/usr/sbin/mondoarchive -Vr -d /dev/sr0 -s 4480m -g

mondoarchive asked me what device to compare, even though I have it in the command line.

(report from Robert E Laughlin)

#456 OBDR mode is not compatible with -H option of mondoarchive mondo 3.0.5 defect major 13 years ago

As reported on mondo ML: ​http://sourceforge.net/mailarchive/forum.php?thread_name=1295604747763-2300816.post%40n3.nabble.com&forum_name=mondo-devel

#482 -V switching to verify timing issue mondo 3.0.5 defect minor 13 years ago

When I run mondoarchive using -V (verify) mondo asks for device /dev when switching from making the DVD to verifying the DVD.

During the start of the verify mondo asks for the /dev. If I answer the /dev prompt immediately mondo then asks to abort the backup. But if I wait till the dvd activity stops then enter /dev/sr0 the verify proceeds and the mondoarchive with verify succeeds.

log attached

#506 NFS mount could be done automatically mondo 3.0.5 enhancement minor 13 years ago

NFS mount could be done automatically instead of asking the user to do it manually.

#507 Place scratch dir automatically on NFS mondo 3.0.5 enhancement normal 13 years ago

How to put the scratch dir on the NFS mount automatically (mount is done inside mondo - normally - so user has no way as of now to specify the creation of the scratch dir under that mount point, which would be useful in that case. From code it seems that scratchdir is created on the fly so should work.

#509 pre script limitation mondo 3.0.5 enhancement normal 13 years ago

Problem for pre script: it has to be at the root of the NFS share mounted. subdir are not handled, due to copy under /tmp as of now

#510 grub install issue with dm multipath mondo 3.0.5 defect normal 13 years ago

Restoration is done by default for grub on sda (because multipath and GRUB found on sda, sdb, dm-2 => prefer to get a question at restore time + option in boot cli) Also useful for P2V.

#625 lvm size appear to zero mondo enhancement normal 12 years ago

During restore, the partitions are correctly sized but the lvm size appear to zero. Mondorestore will size the lvm correctly when it will continue to process. The sizes are correctly computed by the script /tmp/i-want-my-lvm. But It should be good to have the lvm size not displayed to zero.

#627 Mondorestore CTL+ALT+DEL Fails to Cancel Repartitioning mondo 3.0.5 defect critical 12 years ago

Ticket raised at the request of Bruno following a report in the mailing list.

Fortunately this happened on a test rig.

When mondorestore enters the countdown phase prior to repartitioning a disk it instructs the user that the process may be cancelled by the combination keystroke CTL-ALT-DEL. This does not work. This process continues and destroys the partition structure, then recreates it and applies a file system.

I think it is important that this feature should work as stated on the screen advice.

#628 3.0.2-1 Fail to Restore from External Hard Disk mondo 3.0.5 defect major 12 years ago

This ticket is raised at the request of Bruno as a result of a mailing list discussion. See archive: Date=June 10 2012 Title=3.0.2-1 Fail to Restore from External Hard Disk

A single mondorescue-1.iso backup is successfully created directly to an external hard disk and stored in /mondo.

Booting from the mondorescue.iso (mindi) CDROM

  • Boot codes: interactive noresize
  • Read from=Hard disk
  • Prefix=mondorescue
  • On what device do the ISO files live=/dev/sdb1
  • What is disk format=ext4
  • Are you restoring from an external hard drive=Yes
  • At what path on this device can the ISO files be found=/mondo
  • When mondorestore displays the message "Failed to find config/file archives. Choose another source?"
  • ALT-F2
  • mount "... /dev/sdb1 on /tmp/isodir type ext4 (ro,relatime,barrier=1,data=ordered)"
  • ls -1 /mnt/isodir/mondo/*.iso "/tmp/isodir/mondo/mondorescue-1.iso /tmp/isodir/mondo/mondorescue.iso"

It seems that mondorestore mounts the external disk OK but does not use the path to the directory holding the backup ISO.

At the suggestion of Bruno mondorescue-1.iso was copied to the root of the external drive and the restore attempted again. This time the ISO is found but the restore fails at a later stage.

Booting from the mondorescue.iso (mindi) CDROM

  • Boot codes: interactive noresize
  • Read from=Hard disk
  • Prefix=mondorescue
  • On what device do the ISO files live=/dev/sdb1
  • What is disk format=ext4
  • Are you restoring from an external hard drive=Yes
  • At what path on this device can the ISO files be found=/
  • Editing Mountlist=OK
  • Save mountlist and continue=Yes
  • Erase and partition hard drives=Yes
  • Restore all data=Yes
  • A message is displayed "Please insert ISO #1 and press Enter"

At this point the mondorestore.log was saved as it is not possible to proceed further. The log is attached.

#642 mondoarchive -OVN does not exclude automounts mondo defect normal 12 years ago

hello, mondoarchive -OVN does not exclude unmounted automounts from the catalog, so it backs up the complete mountpoint as it gets mounted when the actual backup starts.

A scripted ls -l to the automount directories close before the backup does help but is not that nice!

The used versions are: mondo-3.0.2-1.sles10 mindi-busybox-1.18.5-1.sles10 mindi-2.1.3-1.sles10

kind regards Daniel Berglar

#648 Additional Control Over Boot in Mindi Configuration mindi 3.0.5 enhancement trivial 12 years ago

I have run into a scenario where it would be useful to have a little more control over how recovery media boots. In particular, the boot loader timeout and default boot option.

For my purposes, it would be useful to have restoration media timeout quickly and boot into expert mode as a default. Once booted the user will be able to select backups from library disk to restore from via a script (that eventually call on mondorestore).

Using mindi versus mondo would be an option to get expert working as the default but it would require that I handle the generation of CD/DVD media externally, something which mondo does nicely already.

The changes required to implement this are minimal.

Establish globals prior sourcing mindi.conf: 

MINDI_ADDITIONAL_BOOT_PARAMS="..." 
MINDI_DEFAULT_BOOT_OPTION=""
MINDI_BOOT_TIMEOUT=""

in MakeBootConfFile, handle the mindi.conf default option and timeout for mondoarchive non-CDRECOVERY only: 

MakeBootConfFile()
{
    ...
    # Compute which default option to boot from
    ...
    elif [ _"$MONDO_SHARE" != _"" ]; then
        if [ -e "$MINDI_TMP/NETFS-DEV" ]; then
            echo -en "default${sep}iso\n"
        elif [ "$MINDI_DEFAULT_BOOT_OPTION" != "" ]; then
            LogIt "Overriding default boot option: $MINDI_DEFAULT_BOOT_OPTION"
            echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
        else
            echo -en "default${sep}interactive\n"
        fi
    else
    ....
    # Handle timeout
    if [ "$CDRECOVERY" == "yes" ]; then
        echo -en "timeout${sep}1000\n"
    elif [ "$MINDI_BOOT_TIMEOUT" != "" ]; then
        LogIt "Overriding boot timeout: $MINDI_BOOT_TIMEOUT"
        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
    else
        echo -en "timeout${sep}300\n"
    fi
    ....
}

A small change but one that would be useful.

#695 Mondo does not seem to support drbd mondo 4.0.0 enhancement normal 11 years ago

Hi All,

I have backed up a server running drbd and restored it to another server with the same hard disk configuration.

When I try to look at the restored drbd partition using drbdadm role r0 I get the error message Unconfigured.

When I try to check my replica mount, I see that /dev/drbd0 is not mounted and the mount point is now a folder on /dev/mapper/VolGroup00-LogVol00.

I am running mondo V3.0.3-r3091.

Any ideas on how to fix this most gratefully received.

#710 Ability to use the HP ProLiant SD card slot for DR mondo 3.0.5 enhancement normal 11 years ago

It would be interesting to validate the usge of MondoRescue with an SD card put in an HP ProLiant server to use it as a DR mecanism.

While it should'nt require any specific adaptation, it has never been tested so would at leat require that step to be performed.

#714 Cannot restore iso created with v3.0.4 mondorescue on RHEL5u6 mondo 3.0.5 defect critical 11 years ago

Hi,

I have been have recently installed v3.0.4 on RHEL5u6. I have upgraded from v2.2.9.5 due to problems occuring when backing up large sparse files and it using v3.0.4.

I have a major problem with the restore.

  1. At the end of the restore I have the message ' No tarballs. Strange. Maybe you only backed up freakin' big files?'.
  2. exit does not work. It complains about the trap command.
  3. When I try to reboot grub is corrupted. I get error 15.

The command I used to create the archive was /usr/sbin/mondoarchive -OVi -R -N -d /opt -S /opt/backups -T /opt/backups -E "/opt|/opt/backups" -s 16384mb -G -p mondo3.0.4-bkup

Can anybody help me please. I have included the logs and error

#790 mondorestore says a partition is occupied mondo 3.3.1 defect major 8 years ago

When restoring, mondorestore can say that a partition is occupied and stop preparing the disk.

This can happen when the restore is done on an MBR disk whereas the original was GPT.

#797 ldlinux.c32 not found while booting mondo 3.3.0 defect normal 8 years ago

Debian 8.4 - amd64 arch packages from deb ​ftp://ftp.mondorescue.org/debian 8 contrib UEFI system

trying to boot generated CD, but it failed with error message that ldlinux.c32 can't be found

Tried to copy all files form $scratch\EFI to $scratch (while backup is in progress) so I force ldlinux.c32 and configuration files to root dir on CD and evereything started to work again.

mindi - 3.0.2-1 mindi-busybox - 1.21.1-1 mondo - 3.2.2-1

#802 mindi aborts on Debian 8 on UEFI system mindi 3.3.1 defect blocker 8 years ago

When trying to build an ISO image with mindi on Debian 8, it aborts.

#849 Restored VM Fails to Boot mondo 3.3.0 defect major 5 years ago

I'm having an issue with my mondorestore'ed VM failing to boot after the post-mondorestore reboot. I believe the bootloader (GRUB2) is not being setup correctly by mondorestore.

I've attached mondorestore.log, and I have 3 areas of concern: 1. 

INFO: Found Device /dev/vda has a MBR partition type partition table format type on /dev/vda
DBG2: [Main] ../src/mondorestore/mondo-prep.c->partition_device#1539: partition_device('/dev/vda', 1, 0, 'xfs', 1048576) --- starting
DBG2: [Main] ../src/mondorestore/mondo-prep.c->partition_device#1554: Partitioning device /dev/vda1 (1024 MB)
INFO: Found Device /dev/vda has a MBR partition type partition table format type on /dev/vda
DBG1: [Main] ../src/mondorestore/mondo-prep.c->partition_device#1616: Doing the new all-in-one fdisk thing
DBG1: [Main] ../src/mondorestore/mondo-prep.c->partition_device#1617: output = 'n
p
1

+1048576K
'
DBG1: [Main] ../src/mondorestore/mondo-prep.c->partition_device#1624: last line = p
DBG1: [Main] ../src/mondorestore/mondo-prep.c->partition_device#1625: Failed to create partition 1 on /dev/vda; sending 'Enter'...

What would cause this?

2. 

DBG2: [Main] ../src/mondorestore/mondo-rstr-tools.c->run_grub#1476: mr-grub /dev/vda /tmp/mountlist.txt
Now I'll use grub-install
Launching: chroot /mnt/RESTORING grub-install /dev/vda
chroot: can't execute 'grub-install': No such file or directory
grub-install returned 127
Now I'll use grub2-install
Installing for i386-pc platform.
grub2-install: error: cannot find a GRUB drive for /dev/vda1.  Check your device.map.
grub2-install returned 1

The device.map file has "dev/vda". I’ve also tried manually changing device.map to “/dev/vda1”, but I still see the same error. Any ideas why this might be occurring?

3. 

Trying a hack
Checking usr/lib/grub/i386-pc
Cannot find BOOTPATHNAME
.............Cool.
	device (hd0) /dev/vda
	
	root (hd0,0)
	setup (hd0)
	quit 
chroot: can't execute 'grub': No such file or directory
Hack returned res=0

This is a bug in try_grub_hack() of mr-grub. If grub can't be found, the function returns a false positive.

#852 mondorestore doesn't restore UUIDs for btrfs FS mondo 3.3.0 defect normal 4 years ago

the script mr-label-partitions-as-necessary only restore labels for btrfs FS. UUIDs need to be taken in account

#857 why do we have a mr-stabgrub-me mondo 3.3.1 enhancement normal 4 years ago

... when we have a mr-grub ?

#869 No Release File mondo 3.3.0 defect normal 4 years ago

E: The repository '​http://mondo.mirror.pclark.com/ftp/pub/mondorescue/debian/10 buster Release' does not have a Release file.

Cannot install because of that.

#870 Mondo Backup failed with error --> *** buffer overflow detected ***: mondoarchive terminated mondo 3.3.0 defect critical 3 years ago 
[root@frdatlxstadm jcl]# ./Mondo-BCK.sh
Validation du point de montage mondorescue:/data/col1/unixadmin/mondo_image.
Affichage du point de montage
Filesystem                                    1024-blocks         Used    Available Capacity Mounted on
mondorescue:/data/col1/unixadmin/mondo_image 586882068480 462095400960 124786667520      79% /mnt/mondo_image
Validation des repertoire de travail /mnt/mondo_image/scratch/frdatlxstadm & /mnt/mondo_image/tmp/frdatlxstadm
Creation de /mnt/mondo_image/scratch/frdatlxstadm
Creation de /mnt/mondo_image/tmp/frdatlxstadm
Determination de la version de mondorescue (choix du separateur des excludes FS.
SEPARATOR=|
Exclusion AUTO = /dev|/dev/shm|/run|/sys/fs/cgroup|/fs03/PRO/commun|/fs01/appl/PRO/aguila|/tmp|/opt|/fs01/appl/PRO/ctmagent|/run/user/0|/mnt/mondo_image
Debut de la sauvegarde mondorescue.
See /var/log/mondoarchive.log for details of backup run.
Checking sanity of your Linux distribution
Done.
Excluding the following file systems on /dev/shm:
==> |
Making catalog of files to be backed up
---evalcall---1---          Making catalog of /
---evalcall---2--- TASK:  [*...................]   3% done;  0:32 to go
---evalcall---E---
---evalcall---1---          Making catalog of /
---evalcall---2--- TASK:  [**..................]   9% done;  0:20 to go
---evalcall---E---
---evalcall---1---          Making catalog of /
---evalcall---2--- TASK:  [****................]  16% done;  0:15 to go
---evalcall---E---
---evalcall---1---          Making catalog of /
---evalcall---2--- TASK:  [****................]  20% done;  0:16 to go
---evalcall---E---
---evalcall---1---          Making catalog of /
---evalcall---2--- TASK:  [******..............]  26% done;  0:14 to go
---evalcall---E---
---evalcall---1---          Making catalog of /
---evalcall---2--- TASK:  [*******.............]  32% done;  0:12 to go
---evalcall---E---
---evalcall---1---          Making catalog of /
---evalcall---2--- TASK:  [********............]  37% done;  0:11 to go
---evalcall---E---
---evalcall---1---          Making catalog of /
---evalcall---2--- TASK:  [*********...........]  43% done;  0:10 to go
---evalcall---E---
---evalcall---1---          Making catalog of /
---evalcall---2--- TASK:  [**********..........]  49% done;  0:09 to go
---evalcall---E---
---evalcall---1---          Making catalog of /
---evalcall---2--- TASK:  [***********.........]  55% done;  0:08 to go
---evalcall---E---
---evalcall---1---          Making catalog of /
---evalcall---2--- TASK:  [************........]  56% done;  0:08 to go
---evalcall---E---
---evalcall---1---          Making catalog of /
---evalcall---2--- TASK:  [************........]  59% done;  0:09 to go
---evalcall---E---
---evalcall---1---          Making catalog of /
---evalcall---2--- TASK:  [*************.......]  62% done;  0:08 to go
---evalcall---E---
---evalcall---1---          Making catalog of /
---evalcall---2--- TASK:  [**************......]  70% done;  0:06 to go
---evalcall---E---
---evalcall---1---          Making catalog of /
---evalcall---2--- TASK:  [****************....]  77% done;  0:04 to go
---evalcall---E---
---evalcall---1---          Making catalog of /
---evalcall---2--- TASK:  [*****************...]  84% done;  0:03 to go
---evalcall---E---
---evalcall---1---          Making catalog of /
---evalcall---2--- TASK:  [******************..]  87% done;  0:02 to go
---evalcall---E---
---evalcall---1---          Making catalog of /
---evalcall---2--- TASK:  [*******************.]  91% done;  0:01 to go
---evalcall---E---
---evalcall---1---          Making catalog of /
---evalcall---2--- TASK:  [*******************.]  94% done;  0:01 to go
---evalcall---E---
---evalcall---1---          Making catalog of /
---evalcall---2--- TASK:  [********************]  96% done;  0:00 to go
---evalcall---E---
---evalcall---1---          Making catalog of /
---evalcall---2--- TASK:  [********************]  97% done;  0:00 to go
---evalcall---E---
Done.
Dividing filelist into sets
Dividing filelist into sets. Please wait.
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*...................]   3% done;  0:32 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*...................]   4% done;  0:24 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*...................]   5% done;  0:19 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [**..................]   6% done;  0:15 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [**..................]   7% done;  0:13 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [**..................]   8% done;  0:11 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [**..................]   9% done;  0:20 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [**..................]  10% done;  0:18 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [***.................]  11% done;  0:16 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [***.................]  12% done;  0:14 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [***.................]  13% done;  0:13 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [***.................]  14% done;  0:12 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [***.................]  15% done;  0:11 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [****................]  16% done;  0:15 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [****................]  17% done;  0:14 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [****................]  18% done;  0:13 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [****................]  19% done;  0:12 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [****................]  20% done;  0:16 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*****...............]  21% done;  0:15 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*****...............]  22% done;  0:14 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*****...............]  23% done;  0:13 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*****...............]  24% done;  0:12 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [******..............]  26% done;  0:11 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [******..............]  27% done;  0:10 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [******..............]  28% done;  0:10 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [******..............]  29% done;  0:09 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [******..............]  30% done;  0:09 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*******.............]  31% done;  0:08 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*******.............]  34% done;  0:07 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*******.............]  35% done;  0:09 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [********............]  36% done;  0:08 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [********............]  37% done;  0:08 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [********............]  38% done;  0:08 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [********............]  40% done;  0:07 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*********...........]  41% done;  0:07 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*********...........]  42% done;  0:06 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*********...........]  44% done;  0:06 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [**********..........]  50% done;  0:06 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [***********.........]  51% done;  0:05 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [***********.........]  53% done;  0:05 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [************........]  60% done;  0:04 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*************.......]  61% done;  0:03 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*************.......]  62% done;  0:03 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*************.......]  64% done;  0:03 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [***************.....]  71% done;  0:02 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [***************.....]  72% done;  0:02 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [***************.....]  74% done;  0:02 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [****************....]  76% done;  0:02 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [****************....]  79% done;  0:01 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [****************....]  80% done;  0:01 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*****************...]  81% done;  0:02 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*****************...]  82% done;  0:01 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*****************...]  83% done;  0:01 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*****************...]  84% done;  0:01 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [******************..]  86% done;  0:01 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [******************..]  87% done;  0:01 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [******************..]  88% done;  0:01 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [******************..]  89% done;  0:01 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*******************.]  91% done;  0:00 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*******************.]  92% done;  0:00 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*******************.]  93% done;  0:00 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [*******************.]  94% done;  0:00 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [********************]  96% done;  0:00 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [********************]  97% done;  0:00 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [********************]  98% done;  0:00 to go
---evalcall---E---
---evalcall---1---      Dividing filelist into sets
---evalcall---2--- TASK:  [********************]  99% done;  0:00 to go
---evalcall---E---
Your backup will probably occupy a single nfs. Maybe two.
Done.
Copying Mondo's core files to the scratch directory
Done.
Calling MINDI to create boot+data disks
Your boot loader is GRUB and it boots from /dev/sda
Boot loader version string: grub2-install (GRUB) 2.02~beta2
---evalcall---1--- Calling MINDI to create boot+data disk
---evalcall---2--- TASK:  [*...................]   3% done;  0:00 to go
---evalcall---E---
---evalcall---1---      Calling MINDI for boot disk
---evalcall---2--- TASK:  [***.................]  15% done;  0:11 to go
---evalcall---E---
---evalcall---1---      Calling MINDI for boot disk
---evalcall---2--- TASK:  [******..............]  29% done;  0:07 to go
---evalcall---E---
---evalcall---1---      Calling MINDI for boot disk
---evalcall---2--- TASK:  [********............]  39% done;  0:06 to go
---evalcall---E---
---evalcall---1---      Calling MINDI for boot disk
---evalcall---2--- TASK:  [*********...........]  44% done;  0:06 to go
---evalcall---E---
---evalcall---1---      Calling MINDI for boot disk
---evalcall---2--- TASK:  [**********..........]  48% done;  0:06 to go
---evalcall---E---
---evalcall---1---      Calling MINDI for boot disk
---evalcall---2--- TASK:  [***********.........]  52% done;  0:06 to go
---evalcall---E---
---evalcall---1---      Calling MINDI for boot disk
---evalcall---2--- TASK:  [************........]  56% done;  0:06 to go
---evalcall---E---
---evalcall---1---      Calling MINDI for boot disk
---evalcall---2--- TASK:  [*************.......]  65% done;  0:04 to go
---evalcall---E---
---evalcall---1---      Calling MINDI for boot disk
---evalcall---2--- TASK:  [*****************...]  82% done;  0:02 to go
---evalcall---E---
---evalcall---1---      Calling MINDI for boot disk
---evalcall---2--- TASK:  [*****************...]  83% done;  0:07 to go
---evalcall---E---
---evalcall---1---      Calling MINDI for boot disk
---evalcall---2--- TASK:  [*****************...]  85% done;  0:07 to go
---evalcall---E---
---evalcall---1---      Calling MINDI for boot disk
---evalcall---2--- TASK:  [******************..]  86% done;  0:06 to go
---evalcall---E---
---evalcall---1---      Calling MINDI for boot disk
---evalcall---2--- TASK:  [******************..]  88% done;  0:05 to go
---evalcall---E---
---evalcall---1---      Calling MINDI for boot disk
---evalcall---2--- TASK:  [*******************.]  91% done;  0:04 to go
---evalcall---E---
---evalcall---1---      Calling MINDI for boot disk
---evalcall---2--- TASK:  [*******************.]  95% done;  0:02 to go
---evalcall---E---
---evalcall---1---      Calling MINDI for boot disk
---evalcall---2--- TASK:  [********************] 100% done;  0:00 to go
---evalcall---E---
Boot+data disks were created OK
Done.
Preparing to archive your data
Done.
Archiving regular files to media
Archiving regular files
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- Please wait. This may take a couple of hours.
---progress-form---3--- Working...
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   1% done;  0:00 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [**..................] 9% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   1% done; 30:18 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [**..................] 10% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   1% done; 16:45 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [**..................] 10% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   1% done; 11:06 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [***.................] 11% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   1% done; 10:46 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [***.................] 11% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   2% done;  8:34 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [***.................] 12% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   2% done;  8:45 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [***.................] 12% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   3% done;  7:28 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [***.................] 12% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   3% done;  6:30 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [***.................] 13% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   4% done;  5:44 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [***.................] 13% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   4% done;  5:08 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [***.................] 14% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   5% done;  4:39 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [***.................] 14% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*...................]   5% done;  4:14 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [***.................] 14% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [**..................]   6% done;  4:52 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [***.................] 15% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [**..................]   6% done;  4:30 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [***.................] 15% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [**..................]   7% done;  4:23 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [***.................] 15% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [**..................]   7% done;  4:17 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [***.................] 15% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [**..................]   8% done;  4:11 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [***.................] 15% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [**..................]   8% done;  4:16 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [***.................] 15% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [**..................]   9% done;  4:11 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 16% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [**..................]   9% done;  3:57 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 16% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [**..................]  10% done;  4:11 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 16% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [**..................]  10% done;  3:58 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 16% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [***.................]  11% done;  4:02 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 16% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [***.................]  11% done;  3:51 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 17% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [***.................]  12% done;  3:54 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 17% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [***.................]  12% done;  3:51 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 17% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [***.................]  13% done;  3:48 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 17% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [***.................]  13% done;  3:45 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 18% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [***.................]  14% done;  3:42 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 18% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [***.................]  14% done;  3:44 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 18% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [***.................]  15% done;  3:41 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 18% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [***.................]  15% done;  3:39 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 18% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [****................]  16% done;  3:36 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 18% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [****................]  16% done;  3:33 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 18% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [****................]  17% done;  3:31 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 19% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [****................]  17% done;  3:33 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 19% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [****................]  18% done;  3:26 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 19% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [****................]  18% done;  3:32 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 19% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [****................]  19% done;  3:34 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 20% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [****................]  19% done;  3:35 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 20% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [****................]  20% done;  3:37 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [****................] 20% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [****................]  20% done;  3:42 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 21% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*****...............]  21% done;  3:46 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 21% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*****...............]  21% done;  3:51 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 21% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*****...............]  22% done;  3:48 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 21% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*****...............]  22% done;  3:45 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 22% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*****...............]  23% done;  3:49 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 22% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*****...............]  23% done;  3:42 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 22% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*****...............]  24% done;  3:40 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 22% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*****...............]  24% done;  3:37 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 22% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*****...............]  25% done;  3:34 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 22% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*****...............]  25% done;  3:34 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 22% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [******..............]  26% done;  3:32 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 23% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [******..............]  26% done;  3:32 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 23% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [******..............]  27% done;  3:29 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 23% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [******..............]  27% done;  3:27 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 23% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [******..............]  28% done;  3:24 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 23% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [******..............]  28% done;  3:20 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 23% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [******..............]  29% done;  3:20 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 23% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [******..............]  29% done;  3:17 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 24% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [******..............]  30% done;  3:15 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 24% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [******..............]  30% done;  3:11 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 24% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*******.............]  31% done;  3:08 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 24% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*******.............]  31% done;  3:04 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 24% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*******.............]  32% done;  3:00 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 24% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*******.............]  32% done;  2:58 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 24% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*******.............]  33% done;  2:54 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 24% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*******.............]  33% done;  2:54 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 24% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*******.............]  33% done;  2:52 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 24% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*******.............]  34% done;  2:51 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 24% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*******.............]  34% done;  2:47 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 25% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*******.............]  35% done;  2:49 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 25% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*******.............]  35% done;  2:50 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 25% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [********............]  36% done;  2:47 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*****...............] 25% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [********............]  36% done;  2:47 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 26% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [********............]  37% done;  2:45 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 26% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [********............]  37% done;  2:45 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 26% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [********............]  38% done;  2:45 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 27% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [********............]  38% done;  2:43 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 27% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [********............]  39% done;  2:39 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 27% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [********............]  39% done;  2:39 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 27% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [********............]  40% done;  2:36 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 27% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [********............]  40% done;  2:37 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 27% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*********...........]  41% done;  2:34 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 27% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*********...........]  41% done;  2:32 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 28% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*********...........]  42% done;  2:32 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 28% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*********...........]  42% done;  2:29 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 28% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*********...........]  43% done;  2:26 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 28% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*********...........]  43% done;  2:24 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 28% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*********...........]  44% done;  2:24 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 28% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*********...........]  44% done;  2:21 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 29% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*********...........]  45% done;  2:21 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 29% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*********...........]  45% done;  2:18 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 29% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [**********..........]  46% done;  2:16 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 29% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [**********..........]  46% done;  2:16 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 29% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [**********..........]  47% done;  2:14 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 29% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [**********..........]  47% done;  2:13 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 29% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [**********..........]  48% done;  2:11 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 30% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [**********..........]  48% done;  2:09 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 30% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [**********..........]  49% done;  2:06 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 30% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [**********..........]  49% done;  2:08 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 30% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [**********..........]  50% done;  2:06 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 30% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [**********..........]  50% done;  2:05 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 30% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [***********.........]  51% done;  2:04 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [******..............] 30% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [***********.........]  51% done;  2:03 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 31% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [***********.........]  52% done;  2:01 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 31% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [***********.........]  52% done;  1:59 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 31% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [***********.........]  53% done;  1:57 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 31% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [***********.........]  53% done;  1:56 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 31% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [***********.........]  54% done;  1:55 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 31% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [***********.........]  54% done;  1:54 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 32% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [***********.........]  55% done;  1:52 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 32% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [***********.........]  55% done;  1:51 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 32% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [************........]  56% done;  1:49 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 32% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [************........]  56% done;  1:49 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 32% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [************........]  57% done;  1:48 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 32% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [************........]  57% done;  1:45 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 33% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [************........]  58% done;  1:44 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 33% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [************........]  58% done;  1:42 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 33% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [************........]  59% done;  1:40 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 33% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [************........]  59% done;  1:38 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 34% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [************........]  60% done;  1:36 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 34% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [************........]  60% done;  1:34 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 34% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*************.......]  61% done;  1:32 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 34% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*************.......]  61% done;  1:30 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 34% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*************.......]  62% done;  1:29 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 34% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*************.......]  62% done;  1:27 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 34% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*************.......]  63% done;  1:27 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 34% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*************.......]  63% done;  1:25 to go
---progress-form---1--- I am backing up your live filesystem now.
---progress-form---2--- nfs 1: [*******.............] 34% used
---progress-form---3--- Please wait. This may take a couple of hours.
---progress-form---E---
---progress-form---4--- TASK:  [*************.......]  64% done;  1:24 to go
Please be patient. Do not be alarmed by on-screen inactivity.
---evalcall---1---    Running mkisofs to make nfs #1
---evalcall---2--- TASK:  [***************.....]  73% done;  0:00 to go
---evalcall---E---
---evalcall---1---    Running mkisofs to make nfs #1
---evalcall---2--- TASK:  [******************..]  86% done;  0:00 to go
---evalcall---E---
---evalcall---1---    Running mkisofs to make nfs #1
---evalcall---2--- TASK:  [*******************.]  95% done;  0:00 to go
---evalcall---E---
---evalcall---1---    Running mkisofs to make nfs #1
---evalcall---2--- TASK:  [********************]  99% done;  0:00 to go
---evalcall---E---
Call to mkisofs to make ISO (nfs #1) ...OK
*** buffer overflow detected ***: mondoarchive terminated
======= Backtrace: =========
/lib64/libc.so.6(__fortify_fail+0x37)[0x7fe2dbbe6b67]
/lib64/libc.so.6(+0x115ce2)[0x7fe2dbbe4ce2]
mondoarchive[0x433263]
mondoarchive[0x406c15]
mondoarchive[0x407d82]
mondoarchive[0x40d158]
mondoarchive[0x403335]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x7fe2dbaf1495]
mondoarchive[0x4039e5]
======= Memory map: ========
00400000-00453000 r-xp 00000000 fd:01 4201113                            /usr/sbin/mondoarchive
00652000-00653000 r--p 00052000 fd:01 4201113                            /usr/sbin/mondoarchive
00653000-00654000 rw-p 00053000 fd:01 4201113                            /usr/sbin/mondoarchive
00654000-00659000 rw-p 00000000 00:00 0
01e46000-01e6d000 rw-p 00000000 00:00 0                                  [heap]
7fe2cc000000-7fe2cc021000 rw-p 00000000 00:00 0
7fe2cc021000-7fe2d0000000 ---p 00000000 00:00 0
7fe2d0000000-7fe2d0021000 rw-p 00000000 00:00 0
7fe2d0021000-7fe2d4000000 ---p 00000000 00:00 0
7fe2d4000000-7fe2d4021000 rw-p 00000000 00:00 0
7fe2d4021000-7fe2d8000000 ---p 00000000 00:00 0
7fe2d9838000-7fe2d9839000 ---p 00000000 00:00 0
7fe2d9839000-7fe2da039000 rw-p 00000000 00:00 0
7fe2da039000-7fe2da03a000 ---p 00000000 00:00 0
7fe2da03a000-7fe2da83a000 rw-p 00000000 00:00 0
7fe2da83a000-7fe2da84f000 r-xp 00000000 fd:01 4212339                    /usr/lib64/libgcc_s-4.8.5-20150702.so.1
7fe2da84f000-7fe2daa4e000 ---p 00015000 fd:01 4212339                    /usr/lib64/libgcc_s-4.8.5-20150702.so.1
7fe2daa4e000-7fe2daa4f000 r--p 00014000 fd:01 4212339                    /usr/lib64/libgcc_s-4.8.5-20150702.so.1
7fe2daa4f000-7fe2daa50000 rw-p 00015000 fd:01 4212339                    /usr/lib64/libgcc_s-4.8.5-20150702.so.1
7fe2daa50000-7fe2daa51000 ---p 00000000 00:00 0
7fe2daa51000-7fe2db251000 rw-p 00000000 00:00 0
7fe2db251000-7fe2db352000 r-xp 00000000 fd:01 4358714                    /usr/lib64/libm-2.17.so
7fe2db352000-7fe2db551000 ---p 00101000 fd:01 4358714                    /usr/lib64/libm-2.17.so
7fe2db551000-7fe2db552000 r--p 00100000 fd:01 4358714                    /usr/lib64/libm-2.17.so
7fe2db552000-7fe2db553000 rw-p 00101000 fd:01 4358714                    /usr/lib64/libm-2.17.so
7fe2db553000-7fe2db555000 r-xp 00000000 fd:01 4358712                    /usr/lib64/libdl-2.17.so
7fe2db555000-7fe2db755000 ---p 00002000 fd:01 4358712                    /usr/lib64/libdl-2.17.so
7fe2db755000-7fe2db756000 r--p 00002000 fd:01 4358712                    /usr/lib64/libdl-2.17.so
7fe2db756000-7fe2db757000 rw-p 00003000 fd:01 4358712                    /usr/lib64/libdl-2.17.so
7fe2db757000-7fe2db84e000 r-xp 00000000 fd:01 4201118                    /usr/lib64/libslang.so.2.2.4
7fe2db84e000-7fe2dba4e000 ---p 000f7000 fd:01 4201118                    /usr/lib64/libslang.so.2.2.4
7fe2dba4e000-7fe2dba52000 r--p 000f7000 fd:01 4201118                    /usr/lib64/libslang.so.2.2.4
7fe2dba52000-7fe2dba6b000 rw-p 000fb000 fd:01 4201118                    /usr/lib64/libslang.so.2.2.4
7fe2dba6b000-7fe2dbacf000 rw-p 00000000 00:00 0
7fe2dbacf000-7fe2dbc91000 r-xp 00000000 fd:01 4212187                    /usr/lib64/libc-2.17.so
7fe2dbc91000-7fe2dbe91000 ---p 001c2000 fd:01 4212187                    /usr/lib64/libc-2.17.so
7fe2dbe91000-7fe2dbe95000 r--p 001c2000 fd:01 4212187                    /usr/lib64/libc-2.17.so
7fe2dbe95000-7fe2dbe97000 rw-p 001c6000 fd:01 4212187                    /usr/lib64/libc-2.17.so
7fe2dbe97000-7fe2dbe9c000 rw-p 00000000 00:00 0
7fe2dbe9c000-7fe2dbeb3000 r-xp 00000000 fd:01 4358925                    /usr/lib64/libpthread-2.17.so
7fe2dbeb3000-7fe2dc0b2000 ---p 00017000 fd:01 4358925                    /usr/lib64/libpthread-2.17.so
7fe2dc0b2000-7fe2dc0b3000 r--p 00016000 fd:01 4358925                    /usr/lib64/libpthread-2.17.so
7fe2dc0b3000-7fe2dc0b4000 rw-p 00017000 fd:01 4358925                    /usr/lib64/libpthread-2.17.so
7fe2dc0b4000-7fe2dc0b8000 rw-p 00000000 00:00 0
7fe2dc0b8000-7fe2dc0cc000 r-xp 00000000 fd:01 4290257                    /usr/lib64/libnewt.so.0.52.15
7fe2dc0cc000-7fe2dc2cb000 ---p 00014000 fd:01 4290257                    /usr/lib64/libnewt.so.0.52.15
7fe2dc2cb000-7fe2dc2cc000 r--p 00013000 fd:01 4290257                    /usr/lib64/libnewt.so.0.52.15
7fe2dc2cc000-7fe2dc2cd000 rw-p 00014000 fd:01 4290257                    /usr/lib64/libnewt.so.0.52.15
7fe2dc2cd000-7fe2dc2ef000 r-xp 00000000 fd:01 4212178                    /usr/lib64/ld-2.17.so
7fe2dc4dc000-7fe2dc4e1000 rw-p 00000000 00:00 0
7fe2dc4eb000-7fe2dc4ee000 rw-p 00000000 00:00 0
7fe2dc4ee000-7fe2dc4ef000 r--p 00021000 fd:01 4212178                    /usr/lib64/ld-2.17.so
7fe2dc4ef000-7fe2dc4f0000 rw-p 00022000 fd:01 4212178                    /usr/lib64/ld-2.17.so
7fe2dc4f0000-7fe2dc4f1000 rw-p 00000000 00:00 0
7fff29871000-7fff29892000 rw-p 00000000 00:00 0                          [stack]
7fff29928000-7fff2992a000 r-xp 00000000 00:00 0                          [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0                  [vsyscall]
SIGABRT signal received from OS
Abort - probably failed assertion. I'm sleeping for a few seconds so you can rea
Fatal error... MondoRescue is terminating in response to a signal from the OS
---FATALERROR--- MondoRescue is terminating in response to a signal from the OS
If you require technical support, please contact the mailing list.
See http://www.mondorescue.org for details.
The list's members can help you, if you attach that file to your e-mail.
Log file: /var/log/mondoarchive.log
Mondo has aborted.
(archive_this_fileset) - filelist /mnt/mondo_image/tmp/frdatlxstadm/mondo.tmp.XL
Errors occurred while archiving set 140. Please review logs.
Execution run ended; result=254
Type 'less /var/log/mondoarchive.log' to see the output log
Mondo backup process erreur. voir log /mnt/mondo_image/frdatlxstadm_20201128.log
Purge ne gardant que les 5 derniers backups.
Menage fichiers temporaires...
[root@frdatlxstadm jcl]#
#873 mindi aborts on opensuse 15.2 due to /run included mindi 3.3.0 defect critical 3 years ago

Despite the fact that /run is exceluded by mondoarchive from the set, it can be included by mindi in boot disks as shown on opensuse 15.2 The log shows that resolv.conf is redirected to /run/netconfig/resolv.conf which seems to make /run included as a whole, whereas it should't.

Note: See TracReports for help on using and creating reports.