10:13 Preparing udev environment... 10:13 Discovering with udevsettle 10:13 Extracted additional /dev entries OK. 10:13 Redirecting serial to /dev/tty 10:14 Engaging /proc/driver/cciss/cciss0 10:14 ...result=0 10:14 Trying 'mount /dev/shm -t tmpfs -o size=256m' 10:14 Great. Pivot succeeded w/ size=256m 10:14 Successfully mounted dynamic /tmp ramdisk 10:14 find-and-mount-cdrom --- starting 10:14 Trying /dev/hda 10:14 It's not in /dev/hda; I'll keep looking 10:14 Trying /dev/hdb 10:14 It's not in /dev/hdb; I'll keep looking 10:14 Trying /dev/hdc 10:14 It's not in /dev/hdc; I'll keep looking 10:14 Trying /dev/hdd 10:14 It's not in /dev/hdd; I'll keep looking 10:14 Trying /dev/hde 10:14 It's not in /dev/hde; I'll keep looking 10:14 Trying /dev/hdf 10:14 It's not in /dev/hdf; I'll keep looking 10:14 Trying /dev/hdg 10:14 It's not in /dev/hdg; I'll keep looking 10:14 Trying /dev/hdh 10:14 It's not in /dev/hdh; I'll keep looking 10:14 Trying /dev/scd0 10:14 /dev/scd0 has a CD-ROM in it 10:14 CD-ROM found at /dev/scd0 10:14 /dev/scd0 is where the Mondo CD lives. 10:14 CD-ROM found and mounted at /dev/scd0 10:14 find-and-mount-cdrom --- leaving (0) 10:14 OK, I am running on a CD-ROM. Good. 10:14 Installing additional tools ... 10:14 Starting install-additional-tools 10:14 PLEASE WAIT. Untarring data content 10:14 Populating / with tar file content... 10:14 Installing and removing BOOTLOADER.DEVICE BOOTLOADER.MBR BOOTLOADER.NAME BOOTLOADER.VER FILES-IN-FILELIST LAST-FILELIST-NUMBER bin dev etc lib lib64 mondo sbin tmp usr 10:14 Done. 10:14 Exiting install-additional-tools 10:14 WARNING: Unable to find udevadm. Not triggering udev 10:14 klogd and syslogd have been started. 10:14 Using /lib/kbd/keymaps/i386/qwerty/uk.map.gz keyboard map. 10:14 RAID controller(s) detected. Pausing 10 seconds to let them warm up. 10:15 Scanning LVM's... 10:15 LVM's have been started. 10:15 OK, we've found /mnt/cdrom/archives/*; great. 10:15 Re-jigging mondo-restore.cfg because you backed up to ISOs and then burned them to CDs 10:15 Done re-jigging. Yay. 10:15 init (from mindi v2.1.6-r3177) 10:15 /proc/cmdline is: 10:15 ---------- initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=163840 nuke devfs=nomount noresume selinux=0 barrier=off udevtimeout=10 ramdisk_blocksize=1024 BOOT_IMAGE=/vmlinuz 10:15 ---------- 10:15 df result: 10:15 ---------- Filesystem 1K-blocks Used Available Use% Mounted on rootfs 153547 64632 87277 43% / /dev/root 153547 64632 87277 43% / none 5120 216 4904 5% /dev none 24727032 0 24727032 0% /dev/shm /dev/shm 262144 340 261804 1% /tmp /dev/scd0 380294 380294 0 100% /mnt/cdrom 10:15 ------------- 10:15 mount result: 10:15 ------------- rootfs on / type rootfs (rw) /dev/root on / type ext2 (rw) /proc/ on /proc type proc (rw) /sys/ on /sys type sysfs (rw) none on /proc/bus/usb type usbfs (rw) none on /dev type tmpfs (rw) none on /dev/pts type devpts (rw) none on /dev/shm type tmpfs (rw) /dev/shm on /tmp type tmpfs (rw) /dev/scd0 on /mnt/cdrom type iso9660 (ro) nfsd on /proc/fs/nfsd type nfsd (rw) 10:15 ------------- 10:15 lsmod result: 10:15 ------------- Module Size Used by zlib_deflate 52825 0 configfs 62045 0 ext3 169553 0 xfs 507601 0 jbd 95025 1 ext3 nfsd 287209 1 msdos 42689 0 ext4 298265 0 jbd2 97481 1 ext4 crc16 35137 1 ext4 acpi_memhotplug 40517 0 video 53197 0 wmi 41985 0 power_meter 47053 0 battery 43849 0 ac 38729 0 button 40545 0 asus_acpi 50917 0 tpm_tis 48077 0 tpm 50273 1 tpm_tis tpm_bios 40897 1 tpm lp 47121 0 hpilo 44497 0 backlight 39873 1 video shpchp 70893 0 i7core_edac 46793 0 edac_mc 60449 1 i7core_edac pcspkr 36289 0 serio_raw 40517 0 multipath 42177 0 linear 38593 0 raid10 55873 0 raid1 56129 0 dm_rdac 41673 0 raid0 40513 0 raid456 152417 0 dm_hp_sw 36673 0 dm_zero 35265 0 dm_snapshot 52361 0 dm_emc 39105 0 dm_round_robin 36801 0 dm_multipath 56921 4 dm_rdac,dm_hp_sw,dm_emc,dm_round_robin xor 38865 1 raid456 dm_mirror 54865 0 dm_log 44993 1 dm_mirror dm_mod 101777 12 dm_zero,dm_snapshot,dm_multipath,dm_mirror,dm_log hwmon 36553 1 power_meter ib_iser 68161 0 rdma_cm 68689 1 ib_iser ib_cm 72809 1 rdma_cm iw_cm 43465 1 rdma_cm ib_sa 74953 2 rdma_cm,ib_cm ib_addr 41673 1 rdma_cm ib_mad 70629 2 ib_cm,ib_sa ib_core 104901 6 ib_iser,rdma_cm,ib_cm,iw_cm,ib_sa,ib_mad ppa 46417 0 parport_pc 62313 0 imm 47065 0 bnx2i 76385 0 cnic 79577 1 bnx2i ipv6 435105 71 cnic xfrm_nalgo 43333 1 ipv6 crypto_api 42945 1 xfrm_nalgo paride 42433 0 parport 73165 5 lp,ppa,parport_pc,imm,paride auth_rpcgss 81889 1 nfsd vfat 46529 0 nls_utf8 35137 1 nls_iso8859_1 38209 0 nfs 298413 0 nfs_acl 36673 2 nfsd,nfs lockd 101553 2 nfsd,nfs sunrpc 200073 5 nfsd,auth_rpcgss,nfs,nfs_acl,lockd fuse 83057 0 fscache 52385 1 nfs fat 85745 2 msdos,vfat exportfs 38849 1 nfsd virtio_pci 41673 0 virtio_ring 37953 1 virtio_pci virtio_balloon 41025 0 usbserial 67377 0 ohci_hcd 56181 0 sym53c8xx 109545 0 st 72805 0 sd_mod 56513 0 qla2xxx 1222785 0 qla1280 150993 0 osst 84977 0 megaraid_sas 88713 0 megaraid_mbox 65873 0 megaraid_mm 44921 1 megaraid_mbox megaraid 73897 0 iscsi_tcp 50509 0 ide_scsi 51017 0 scsi_dh_emc 42305 0 scsi_dh_alua 42305 0 scsi_dh 42177 3 dm_multipath,scsi_dh_emc,scsi_dh_alua dc395x 67661 0 cxgb3i 77873 0 libiscsi_tcp 53317 2 iscsi_tcp,cxgb3i be2iscsi 94045 0 libiscsi2 77765 6 ib_iser,bnx2i,iscsi_tcp,cxgb3i,libiscsi_tcp,be2iscsi scsi_transport_iscsi2 73945 6 ib_iser,bnx2i,iscsi_tcp,cxgb3i,be2iscsi,libiscsi2 scsi_transport_iscsi 35017 1 scsi_transport_iscsi2 atp870u 64161 0 arcmsr 58049 0 aic7xxx 162681 0 aic79xx 202777 0 aacraid 107081 0 3w_xxxx 60257 0 3w_9xxx 70629 0 virtio_net 48193 0 tg3 161737 0 r8169 76613 0 libphy 53825 0 pcnet32 68933 0 ne2k_pci 44961 0 igb 128341 0 forcedeth 90317 0 e100 70609 0 e1000 161365 0 cxgb3 214705 1 cxgb3i uio 45777 1 cnic bnx2 222925 0 be2net 85325 0 8390 43589 1 ne2k_pci 8139too 61377 0 8139cp 58049 0 3c59x 79861 0 mii 38849 6 r8169,pcnet32,e100,8139too,8139cp,3c59x i2o_block 46817 0 i2o_core 78969 1 i2o_block mptspi 54609 0 scsi_transport_spi 59841 4 sym53c8xx,aic7xxx,aic79xx,mptspi mptsas 84689 0 scsi_transport_sas 68929 1 mptsas mptfc 52553 0 mptscsih 69825 3 mptspi,mptsas,mptfc scsi_transport_fc 83145 2 qla2xxx,mptfc mptctl 65097 0 mptbase 122885 5 mptspi,mptsas,mptfc,mptscsih,mptctl ide_cs 44481 0 ide_cd 73825 0 edd 43337 0 dca 41605 1 igb virtio_blk 41673 0 virtio 39365 4 virtio_pci,virtio_balloon,virtio_net,virtio_blk loop 48721 0 sata_via 44101 0 sata_svw 40901 0 sata_promise 48325 0 sata_nv 62025 0 pata_sis 48197 0 pata_sil680 42693 0 pata_marvell 38977 0 ata_piix 57285 0 ahci 73293 0 libata 209233 9 sata_via,sata_svw,sata_promise,sata_nv,pata_sis,pata_sil680,pata_marvell,ata_piix,ahci sr_mod 50789 1 cdrom 68713 2 ide_cd,sr_mod sg 70649 0 usb_storage 122913 1 bnx2x 638593 0 cciss 109129 2 scsi_mod 199641 45 dm_rdac,dm_hp_sw,ib_iser,ppa,imm,bnx2i,sym53c8xx,st,sd_mod,qla2xxx,qla1280,osst,megaraid_sas,megaraid_mbox,megaraid,iscsi_tcp,ide_scsi,scsi_dh_emc,scsi_dh_alua,scsi_dh,dc395x,cxgb3i,be2iscsi,libiscsi2,scsi_transport_iscsi2,atp870u,arcmsr,aic7xxx,aic79xx,aacraid,3w_xxxx,3w_9xxx,mptspi,scsi_transport_spi,mptsas,scsi_transport_sas,mptfc,mptscsih,scsi_transport_fc,mptctl,libata,sr_mod,sg,usb_storage,cciss 8021q 57937 5 igb,forcedeth,cxgb3,be2net,bnx2x mdio 38465 1 bnx2x ehci_hcd 65997 0 e1000e 168217 0 uhci_hcd 57433 0 10:15 ------------- 10:15 dmesg result: 10:15 ------------- Linux version 2.6.18-238.el5 (mockbuild@ca-build10.us.oracle.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Tue Jan 4 15:41:11 EST 2011 Command line: initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=163840 nuke devfs=nomount noresume selinux=0 barrier=off udevtimeout=10 ramdisk_blocksize=1024 BOOT_IMAGE=/vmlinuz BIOS-provided physical RAM map: BIOS-e820: 0000000000010000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000df62f000 (usable) BIOS-e820: 00000000df62f000 - 00000000df63c000 (ACPI data) BIOS-e820: 00000000df63c000 - 00000000df63d000 (usable) BIOS-e820: 00000000df63d000 - 00000000e4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000c1ffff000 (usable) DMI 2.6 present. ACPI: RSDP (v002 HP ) @ 0x00000000000f4f00 ACPI: XSDT (v001 HP ProLiant 0x00000002 Ò 0x0000162e) @ 0x00000000df630080 ACPI: FADT (v003 HP ProLiant 0x00000002 Ò 0x0000162e) @ 0x00000000df630180 ACPI: SPCR (v001 HP SPCRRBSU 0x00000001 Ò 0x0000162e) @ 0x00000000df62f140 ACPI: MCFG (v001 HP ProLiant 0x00000001 0x00000000) @ 0x00000000df62f1c0 ACPI: HPET (v001 HP ProLiant 0x00000002 Ò 0x0000162e) @ 0x00000000df62f200 ACPI: FFFF (v002 HP ProLiant 0x00000002 Ò 0x0000162e) @ 0x00000000df62f240 ACPI: SPMI (v005 HP ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000df62f2c0 ACPI: ERST (v001 HP ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000df62f300 ACPI: MADT (v001 HP ProLiant 0x00000002 0x00000000) @ 0x00000000df62f500 ACPI: SRAT (v001 HP Proliant 0x00000001 Ò 0x0000162e) @ 0x00000000df62f680 ACPI: FFFF (v001 HP ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000df62fc00 ACPI: BERT (v001 HP ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000df62fd80 ACPI: HEST (v001 HP ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000df62fdc0 ACPI: DMAR (v001 HP ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000df62fe80 ACPI: SSDT (v003 HP CRSPCI0 0x00000002 HP 0x00000001) @ 0x00000000df632240 ACPI: SSDT (v001 HP pcc 0x00000001 INTL 0x20090625) @ 0x00000000df632380 ACPI: SSDT (v001 HP pmab 0x00000001 INTL 0x20090625) @ 0x00000000df632740 ACPI: SSDT (v001 INTEL PPM RCM 0x00000001 INTL 0x20061109) @ 0x00000000df632ac0 ACPI: DSDT (v001 HP DSDT 0x00000001 INTL 0x20030228) @ 0x0000000000000000 SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 0 -> APIC 2 -> Node 0 SRAT: PXM 0 -> APIC 3 -> Node 0 SRAT: PXM 0 -> APIC 4 -> Node 0 SRAT: PXM 0 -> APIC 5 -> Node 0 SRAT: PXM 0 -> APIC 6 -> Node 0 SRAT: PXM 0 -> APIC 7 -> Node 0 SRAT: PXM 1 -> APIC 16 -> Node 1 SRAT: PXM 1 -> APIC 17 -> Node 1 SRAT: PXM 1 -> APIC 18 -> Node 1 SRAT: PXM 1 -> APIC 19 -> Node 1 SRAT: PXM 1 -> APIC 20 -> Node 1 SRAT: PXM 1 -> APIC 21 -> Node 1 SRAT: PXM 1 -> APIC 22 -> Node 1 SRAT: PXM 1 -> APIC 23 -> Node 1 SRAT: Node 0 PXM 0 0-e0000000 SRAT: Node 0 PXM 0 0-620000000 SRAT: Node 1 PXM 1 620000000-c20000000 NUMA: Using 29 for the hash shift. Bootmem setup node 0 0000000000000000-0000000620000000 Bootmem setup node 1 0000000620000000-0000000c1ffff000 Memory for crash kernel (0x0 to 0x0) notwithin permissible range disabling kdump On node 0 totalpages: 6199489 DMA zone: 2393 pages, LIFO batch:0 DMA32 zone: 896616 pages, LIFO batch:31 Normal zone: 5300480 pages, LIFO batch:31 On node 1 totalpages: 6205440 Normal zone: 6205440 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] disabled) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled) Processor #16 7:10 APIC version 21 ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] enabled) Processor #0 7:10 APIC version 21 ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x14] enabled) Processor #20 7:10 APIC version 21 ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x34] disabled) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x04] enabled) Processor #4 7:10 APIC version 21 ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] disabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled) Processor #18 7:10 APIC version 21 ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x32] disabled) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x02] enabled) Processor #2 7:10 APIC version 21 ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x16] enabled) Processor #22 7:10 APIC version 21 ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x36] disabled) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x06] enabled) Processor #6 7:10 APIC version 21 ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] disabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled) Processor #17 7:10 APIC version 21 ACPI: LAPIC (acpi_id[0x19] lapic_id[0x31] disabled) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled) Processor #1 7:10 APIC version 21 ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x15] enabled) Processor #21 7:10 APIC version 21 ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x35] disabled) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x05] enabled) Processor #5 7:10 APIC version 21 ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled) Processor #19 7:10 APIC version 21 ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x33] disabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x03] enabled) Processor #3 7:10 APIC version 21 ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x17] enabled) Processor #23 7:10 APIC version 21 ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x37] disabled) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x07] enabled) Processor #7 7:10 APIC version 21 ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x00] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 0, version 32, address 0xfec80000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to physical flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000f0000 Nosave address range: 00000000000f0000 - 0000000000100000 Nosave address range: 00000000df62f000 - 00000000df63c000 Nosave address range: 00000000df63d000 - 00000000e4000000 Nosave address range: 00000000e4000000 - 00000000fec00000 Nosave address range: 00000000fec00000 - 00000000fee10000 Nosave address range: 00000000fee10000 - 00000000ff800000 Nosave address range: 00000000ff800000 - 0000000100000000 Allocating PCI resources starting at e6000000 (gap: e4000000:1ac00000) SMP: Allowing 32 CPUs, 16 hotplug CPUs Built 2 zonelists. Total pages: 12404929 Kernel command line: initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=163840 nuke devfs=nomount noresume selinux=0 barrier=off udevtimeout=10 ramdisk_blocksize=1024 BOOT_IMAGE=/vmlinuz Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes) Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes) Checking aperture... PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x70a1000 - 0xb0a1000 Memory: 49438732k/50855932k available (2592k kernel code, 882412k reserved, 1649k data, 224k init) Calibrating delay loop (skipped), value calculated using timer frequency.. 5066.99 BogoMIPS (lpj=2533497) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 0/10 -> Node 1 using mwait in idle threads. CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) SMP alternatives: switching to UP code ACPI: Core revision 20060707 Using local APIC timer interrupts. Detected 8.333 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/16 APIC 0x0 Initializing CPU#1 Calibrating delay using timer specific routine.. 5066.82 BogoMIPS (lpj=2533413) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 1/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM1) Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05 SMP alternatives: switching to SMP code Booting processor 2/16 APIC 0x14 Initializing CPU#2 Calibrating delay using timer specific routine.. 5066.89 BogoMIPS (lpj=2533445) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 2/14 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 2 CPU2: Thermal monitoring enabled (TM1) Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05 SMP alternatives: switching to SMP code Booting processor 3/16 APIC 0x4 Initializing CPU#3 Calibrating delay using timer specific routine.. 5066.98 BogoMIPS (lpj=2533492) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 3/4 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU3: Thermal monitoring enabled (TM1) Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05 SMP alternatives: switching to SMP code Booting processor 4/16 APIC 0x12 Initializing CPU#4 Calibrating delay using timer specific routine.. 5066.80 BogoMIPS (lpj=2533401) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 4/12 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 CPU4: Thermal monitoring enabled (TM1) Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05 SMP alternatives: switching to SMP code Booting processor 5/16 APIC 0x2 Initializing CPU#5 Calibrating delay using timer specific routine.. 5066.81 BogoMIPS (lpj=2533407) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 5/2 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU5: Thermal monitoring enabled (TM1) Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05 SMP alternatives: switching to SMP code Booting processor 6/16 APIC 0x16 Initializing CPU#6 Calibrating delay using timer specific routine.. 5066.81 BogoMIPS (lpj=2533405) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 6/16 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 3 CPU6: Thermal monitoring enabled (TM1) Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05 SMP alternatives: switching to SMP code Booting processor 7/16 APIC 0x6 Initializing CPU#7 Calibrating delay using timer specific routine.. 5066.84 BogoMIPS (lpj=2533420) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 7/6 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU7: Thermal monitoring enabled (TM1) Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05 SMP alternatives: switching to SMP code Booting processor 8/16 APIC 0x11 Initializing CPU#8 Calibrating delay using timer specific routine.. 5066.80 BogoMIPS (lpj=2533403) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 8/11 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 CPU8: Thermal monitoring enabled (TM1) Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05 SMP alternatives: switching to SMP code Booting processor 9/16 APIC 0x1 Initializing CPU#9 Calibrating delay using timer specific routine.. 5066.83 BogoMIPS (lpj=2533416) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 9/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU9: Thermal monitoring enabled (TM1) Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05 SMP alternatives: switching to SMP code Booting processor 10/16 APIC 0x15 Initializing CPU#10 Calibrating delay using timer specific routine.. 5066.81 BogoMIPS (lpj=2533405) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 10/15 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 2 CPU10: Thermal monitoring enabled (TM1) Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05 SMP alternatives: switching to SMP code Booting processor 11/16 APIC 0x5 Initializing CPU#11 Calibrating delay using timer specific routine.. 5066.83 BogoMIPS (lpj=2533419) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 11/5 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU11: Thermal monitoring enabled (TM1) Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05 SMP alternatives: switching to SMP code Booting processor 12/16 APIC 0x13 Initializing CPU#12 Calibrating delay using timer specific routine.. 5066.77 BogoMIPS (lpj=2533386) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 12/13 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 CPU12: Thermal monitoring enabled (TM1) Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05 SMP alternatives: switching to SMP code Booting processor 13/16 APIC 0x3 Initializing CPU#13 Calibrating delay using timer specific routine.. 5066.85 BogoMIPS (lpj=2533425) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 13/3 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU13: Thermal monitoring enabled (TM1) Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05 SMP alternatives: switching to SMP code Booting processor 14/16 APIC 0x17 Initializing CPU#14 Calibrating delay using timer specific routine.. 5066.88 BogoMIPS (lpj=2533440) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 14/17 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 3 CPU14: Thermal monitoring enabled (TM1) Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05 SMP alternatives: switching to SMP code Booting processor 15/16 APIC 0x7 Initializing CPU#15 Calibrating delay using timer specific routine.. 5066.97 BogoMIPS (lpj=2533486) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 15/7 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU15: Thermal monitoring enabled (TM1) Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05 Brought up 16 CPUs CPU#0: NMI watchdog performance counter calibration - 1258->1279 CPU#1: NMI watchdog performance counter calibration - 41->53 CPU#2: NMI watchdog performance counter calibration - 66->87 CPU#3: NMI watchdog performance counter calibration - 40->53 CPU#4: NMI watchdog performance counter calibration - 66->87 CPU#5: NMI watchdog performance counter calibration - 40->52 CPU#6: NMI watchdog performance counter calibration - 66->87 CPU#7: NMI watchdog performance counter calibration - 39->52 CPU#8: NMI watchdog performance counter calibration - 64->85 CPU#9: NMI watchdog performance counter calibration - 39->51 CPU#10: NMI watchdog performance counter calibration - 64->85 CPU#11: NMI watchdog performance counter calibration - 38->51 CPU#12: NMI watchdog performance counter calibration - 63->84 CPU#13: NMI watchdog performance counter calibration - 38->51 CPU#14: NMI watchdog performance counter calibration - 63->84 CPU#15: NMI watchdog performance counter calibration - 38->50 NMI watchdog testing PASSED. time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. time.c: Detected 2533.497 MHz processor. sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=216 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=96 bytes sizeof(skbuff)=248 bytes migration_cost=9,33,1140 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 15104k freed NET: Registered protocol family 16 ACPI: bus type pci registered Warning: pci_mmcfg_init marking 256MB space uncacheable. MCFG table requires 64MB uncacheable only. Try booting with acpi_mcfg_max_pci_bus_num=on PCI: Using MMCONFIG at e0000000 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT07._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT09._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *7 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0 hpet0: 4 64-bit timers, 14318180 Hz DMAR:Host address width 39 DMAR:DRHD base: 0x000000e7ffe000 flags: 0x1 IOMMU e7ffe000: ver 1:0 cap c90780106f0462 ecap f0207e DMAR:RMRR base: 0x000000df7fd000 end: 0x000000df7fefff DMAR:RMRR base: 0x000000df7f6000 end: 0x000000df7fbfff DMAR:RMRR base: 0x000000df63e000 end: 0x000000df63ffff DMAR:ATSR flags: 0x0 DMAR:Device scope device [0000:00:06.00] not found DMAR:Device scope device [0000:00:06.00] not found DMAR:Device scope device [0000:00:05.00] not found DMAR:Device scope device [0000:00:05.00] not found DMAR:Device scope device [0000:00:04.00] not found DMAR:Device scope device [0000:00:04.00] not found PCI-GART: No AMD northbridge found. pnp: 00:01: ioport range 0x408-0x40f has been reserved pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:01: ioport range 0x700-0x71f has been reserved pnp: 00:01: iomem range 0xe0000000-0xe3ffffff could not be reserved pnp: 00:01: iomem range 0xfe000000-0xfebfffff has been reserved pnp: 00:01: iomem range 0xe7ffe000-0xe7ffffff has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: f3800000-fb7fffff PREFETCH window 0x00000000e6000000-0x00000000e60fffff PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:07.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:08.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:09.0 IO window: 4000-4fff MEM window: fb900000-fbafffff PREFETCH window 0x00000000e6100000-0x00000000e61fffff PCI: Bridge: 0000:00:0a.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: 5000-5fff MEM window: fbb00000-fbffffff PREFETCH window 0x00000000e6200000-0x00000000e62fffff PCI: Bridge: 0000:00:1e.0 IO window: 2000-3fff MEM window: f3600000-f37fffff PREFETCH window 0x00000000e8000000-0x00000000efffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:07.0 to 64 PCI: Setting latency timer of device 0000:00:08.0 to 64 PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0a.0 to 64 GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) type=2000 audit(1378289626.392:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API alg: No test for crc32c (crc32c-generic) ksign: Installing public key data Loading keyring - Added public key 895817073326F70 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:03.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:07.0 to 64 PCI: Setting latency timer of device 0000:00:08.0 to 64 PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0a.0 to 64 PCI: Setting latency timer of device 0000:00:1c.0 to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-3 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C3] C3[C3]) ACPI: CPU8 (power states: C1[C1] C2[C3] C3[C3]) ACPI: CPU4 (power states: C1[C1] C2[C3] C3[C3]) ACPI: CPU12 (power states: C1[C1] C2[C3] C3[C3]) ACPI: CPU2 (power states: C1[C1] C2[C3] C3[C3]) ACPI: CPU10 (power states: C1[C1] C2[C3] C3[C3]) ACPI: CPU6 (power states: C1[C1] C2[C3] C3[C3]) ACPI: CPU14 (power states: C1[C1] C2[C3] C3[C3]) ACPI: CPU1 (power states: C1[C1] C2[C3] C3[C3]) ACPI: CPU9 (power states: C1[C1] C2[C3] C3[C3]) ACPI: CPU5 (power states: C1[C1] C2[C3] C3[C3]) ACPI: CPU13 (power states: C1[C1] C2[C3] C3[C3]) ACPI: CPU3 (power states: C1[C1] C2[C3] C3[C3]) ACPI: CPU11 (power states: C1[C1] C2[C3] C3[C3]) ACPI: CPU7 (power states: C1[C1] C2[C3] C3[C3]) ACPI: CPU15 (power states: C1[C1] C2[C3] C3[C3]) ACPI: Thermal Zone [THM0] (8 C) Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S4 S5) Initalizing network drop monitor service md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 224k freed Write protecting the kernel read-only data: 519k USB Universal Host Controller Interface driver v3.0 GSI 17 sharing vector 0x3A and IRQ 17 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 58, io base 0x00001000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2 e1000e: Copyright (c) 1999 - 2010 Intel Corporation. 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller SCSI subsystem initialized Floppy drive(s): fd0 is 1.44M HP CISS Driver (v 3.6.22-RH1) Broadcom NetXtreme II 5771x 10Gigabit Ethernet Driver bnx2x 1.52.53-4 (2010/16/08) GSI 18 sharing vector 0x42 and IRQ 18 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 23 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 66, io base 0x00001020 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected GSI 19 sharing vector 0x4A and IRQ 19 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 74, io base 0x00001040 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 66, io base 0x00001060 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 22 (level, low) -> IRQ 74 uhci_hcd 0000:01:04.4: UHCI Host Controller uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 5 uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:01:04.4: irq 74, io base 0x00003800 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected e1000e 0000:09:00.0: Disabling ASPM L1 GSI 20 sharing vector 0x52 and IRQ 20 ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 32 (level, low) -> IRQ 82 PCI: Setting latency timer of device 0000:09:00.0 to 64 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 58, io mem 0xf35f0000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 8 ports detected eth0: (PCI Express:2.5GB/s:Width x4) 00:1b:78:2a:86:8e eth0: Intel(R) PRO/1000 Network Connection eth0: MAC: 0, PHY: 1, PBA No: d95140-009 e1000e 0000:09:00.1: Disabling ASPM L1 GSI 21 sharing vector 0x62 and IRQ 21 ACPI: PCI Interrupt 0000:09:00.1[B] -> GSI 42 (level, low) -> IRQ 98 PCI: Setting latency timer of device 0000:09:00.1 to 64 GSI 22 sharing vector 0x72 and IRQ 22 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 28 (level, low) -> IRQ 114 PCI: Setting latency timer of device 0000:02:00.0 to 64 bnx2x 0000:02:00.0: part number 412F4E-0-0-0 bnx2x 0000:02:00.0: eth1: Broadcom NetXtreme II BCM57711E XGb (A0) PCI-E x4 5GHz (Gen2) found at mem fb000000, IRQ 114, node addr d4:85:64:5c:ca:e0 GSI 23 sharing vector 0x7A and IRQ 23 ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 40 (level, low) -> IRQ 122 PCI: Setting latency timer of device 0000:02:00.1 to 64 bnx2x 0000:02:00.1: part number 412F4E-0-0-0 bnx2x 0000:02:00.1: eth2: Broadcom NetXtreme II BCM57711E XGb (A0) PCI-E x4 5GHz (Gen2) found at mem fa000000, IRQ 122, node addr d4:85:64:5c:ca:e4 eth3: (PCI Express:2.5GB/s:Width x4) 00:1b:78:2a:86:8f eth3: Intel(R) PRO/1000 Network Connection eth3: MAC: 0, PHY: 1, PBA No: d95140-009 ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 16 (level, low) -> IRQ 169 cciss0: <0x323a> at PCI 0000:0c:00.0 IRQ 146 using DAC cciss/c0d0: p1 p2 usb 5-1: new full speed USB device using uhci_hcd and address 2 usb 5-1: configuration #1 chosen from 1 choice input: HP Virtual Keyboard as /class/input/input0 input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1 input: HP Virtual Keyboard as /class/input/input1 input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1 usb 5-2: new full speed USB device using uhci_hcd and address 3 usb 5-2: configuration #1 chosen from 1 choice hub 5-2:1.0: USB hub found hub 5-2:1.0: 7 ports detected usb 5-2.2: new full speed USB device using uhci_hcd and address 4 usb 5-2.2: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning floppy0: no floppy controllers found work still pending Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found work still pending Vendor: HP Model: Virtual DVD-ROM Rev: 0.0 Type: CD-ROM ANSI SCSI revision: 00 usb-storage: device scan complete scsi 0:0:0:0: Attached scsi generic sg0 type 5 sr0: scsi3-mmc drive: 12x/12x cd/rw tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 libata version 3.00 loaded. Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found work still pending loop: loaded (max 8 devices) dca service started, version 1.8 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Fusion MPT base driver 3.04.15rh Copyright (c) 1999-2008 LSI Corporation Fusion MPT misc device (ioctl) driver 3.04.15rh mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=10,220) Fusion MPT FC Host driver 3.04.15rh Fusion MPT SAS Host driver 3.04.15rh Fusion MPT SPI Host driver 3.04.15rh I2O subsystem v1.325 i2o: max drivers = 8 I2O Block Device OSM v1.325 block-osm: registered device at major 80 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) 8139too Fast Ethernet driver 0.9.27 Intel(R) PRO/1000 Network Driver - version 7.3.21-k4-2-NAPI Copyright (c) 1999-2006 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.10-k3-1-NAPI e100: Copyright(c) 1999-2005 Intel Corporation Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2-1 Copyright (c) 2007-2009 Intel Corporation. ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html pcnet32.c:v1.32 18.Mar.2006 tsbogend@alpha.franken.de Generic PHY: Registered new driver 3ware 9000 Storage Controller device driver for Linux v2.26.08.007-2.6.18RH. 3ware Storage Controller device driver for Linux v1.26.03.000-2.6.18RH. Adaptec aacraid driver 1.1-5[24702] Loading iSCSI transport class v2.0-871. iscsi: registered transport (be2iscsi) cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. iscsi: registered transport (cxgb3i) alua: device handler registered emc: device handler registered GDT-HA: Storage RAID Controller Driver. Version: 3.05 GDT-HA: Found 0 PCI Storage RAID Controllers iscsi: registered transport (tcp) megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.04.31-RH1 Tues. June. 15 14:13:02 EST 2010 osst :I: Tape driver with OnStream support version 0.99.4 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ QLogic Fibre Channel HBA Driver st: Version 20070203, fixed bufsize 32768, s/g segs 256 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core FS-Cache: Loaded fuse init (API version 7.10) scsi1 : cciss ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found work still pending NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver Broadcom NetXtreme II CNIC Driver cnic v2.1.2 (May 26, 2010) cnic: Added CNIC device: eth1 cnic: Added CNIC device: eth2 Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.3 (Aug 10, 2010) iscsi: registered transport (bnx2i) scsi2 : Broadcom Offload iSCSI Initiator scsi3 : Broadcom Offload iSCSI Initiator GDT-HA: Storage RAID Controller Driver. Version: 3.05 GDT-HA: Found 0 PCI Storage RAID Controllers imm: Version 2.05 (for Linux 2.4.0) ppa: Version 2.07 (for Linux 2.4.x) iscsi: registered transport (iser) device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com raid5: automatically using best checksumming function: generic_sse generic_sse: 5988.000 MB/sec raid5: using function: generic_sse (5988.000 MB/sec) device-mapper: multipath: version 1.0.5 loaded device-mapper: multipath round-robin: version 1.0.0 loaded device-mapper: multipath emc: version 0.0.3 loaded device-mapper: multipath hp-sw: version 1.0.0 loaded raid6: int64x1 1601 MB/s raid6: int64x2 1820 MB/s raid6: int64x4 1496 MB/s raid6: int64x8 1390 MB/s raid6: sse2x1 3875 MB/s raid6: sse2x2 4527 MB/s raid6: sse2x4 5148 MB/s raid6: using algorithm sse2x4 (5148 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: raid0 personality registered for level 0 device-mapper: multipath rdac: rdac: version 0.4 loaded md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: linear personality registered for level -1 md: multipath personality registered for level -4 input: PC Speaker as /class/input/input2 EDAC MC: Ver: 2.0.1 Jan 4 2011 EDAC i7core: Driver loaded. shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI Interrupt 0000:01:04.2[B] -> GSI 22 (level, low) -> IRQ 74 lp: driver loaded but no devices found ACPI: Power Button (FF) [PWRF] ACPI: Mapper loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem 10:15 ------------- 10:15 /proc/mdstat: 10:15 ------------- Personalities : [raid6] [raid5] [raid4] [raid0] [raid1] [raid10] [linear] [multipath] unused devices: 10:15 ------------- 10:15 /proc/swaps: 10:15 ------------- 10:15 ------------- 10:15 /proc/filesystems: 10:15 ------------- nodev sysfs nodev rootfs nodev bdev nodev proc nodev cpuset nodev binfmt_misc nodev debugfs nodev securityfs nodev sockfs nodev usbfs nodev pipefs nodev anon_inodefs nodev futexfs nodev tmpfs nodev inotifyfs nodev eventpollfs nodev devpts ext2 nodev ramfs nodev hugetlbfs iso9660 nodev mqueue nodev fuse fuseblk nodev fusectl nodev rpc_pipefs nodev nfs nodev nfs4 vfat ext4 ext4dev msdos nodev nfsd xfs ext3 nodev configfs 10:15 ------------- 10:15 /proc/partitions: 10:15 ------------- major minor #blocks name 104 0 292935982 cciss/c0d0 104 1 104391 cciss/c0d0p1 104 2 292824787 cciss/c0d0p2 252 0 2097152 dm-0 252 1 3145728 dm-1 252 2 262144 dm-2 252 3 3145728 dm-3 252 4 52428800 dm-4 252 5 16777216 dm-5 10:15 ------------- 10:15 fdisk result: 10:15 ------------- Disk /dev/cciss/c0d0: 299.9 GB, 299966445568 bytes 255 heads, 63 sectors/track, 36468 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/cciss/c0d0p1 * 1 13 104391 83 Linux /dev/cciss/c0d0p2 14 36468 292824787+ 8e Linux LVM 10:15 ------------- 10:15 /tmp/mondo-restore.cfg result: 10:15 ------------- media-size 0 files-in-filelist 46972 last-filelist-number 80 internal-tape-block-size 32768 use-lzo no use-gzip yes use-star yes use-lzma no use-comp yes datestamp Tue Sep 3 19:31:24 BST 2013 total-slices 1 iso-dev /dev/mapper/rootvg-opt iso-mnt /opt iso-prefix mondo3.0.4-bkup isodir /backups bootloader.device /dev/cciss/c0d0 bootloader.name GRUB bootloader.ver grub (GNU GRUB 0.97) backup-media-type cdr differential 0 10:15 WARNING: Unable to find udevadm. Not triggering udev 10:15 backup-media-type is specified in config file - great. 10:15 Calling post-init 10:15 Executing preliminary script Here is my /tmp/mountlist.txt /dev/cciss/c0d0p2 lvm lvm 292824787 /dev/rootvg/root / ext3 lvm /dev/rootvg/var /var ext3 lvm /dev/rootvg/home /home ext3 lvm /dev/rootvg/usr /usr ext3 lvm /dev/rootvg/opt /opt ext3 lvm /dev/cciss/c0d0p1 /boot ext3 104391 /boot /dev/rootvg/swap swap swap lvm 10:15 mondorestore found; cool... 10:15 mount-me found 10:15 unmount-me found 10:15 mondorestore found 10:15 -------------------NUKE MODE------------------- [TH=14047] libmondo-tools.c->reset_bkpinfo#835: Hi root is mounted at /dev/root No, Schlomo, that doesn't mean /dev/root is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [TH=14047] libmondo-devices.c->am_I_in_disaster_recovery_mode#167: Is this a ramdisk? result = 1 [TH=14047] libmondo-tools.c->setup_tmpdir#754: Purging old tmpdir /mondo.tmp.* [TH=14047] libmondo-tools.c->setup_scratchdir#798: Purging old scratchdir /mondo.scratch.* running: mkdir -p /mnt/cdrom > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) root is mounted at /dev/root No, Schlomo, that doesn't mean /dev/root is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [TH=14047] libmondo-devices.c->am_I_in_disaster_recovery_mode#167: Is this a ramdisk? result = 1 running: mount / -o remount,rw > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-tools.c->get_kernel_version#254: g_kernel_version = 2.618000 [Main] mondorestore.c->main#2890: FYI - g_mountlist_fname = /tmp/mountlist.txt running: cp -f /tmp/mountlist.txt /tmp/mountlist.txt.orig > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: umount -d /mnt/cdrom > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: rm -Rf /tmp/tmpfs/mondo.tmp.* > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) -------------- Mondo Restore v3.0.4-r3177 ------------- DON'T PANIC! Mondorestore logs almost everything, so please don't break out in a cold sweat just because you see a few error messages in the log. Read them; analyze them; see if they are significant; above all, verify your backups! Please attach a compressed copy of this log to any e-mail you send to the Mondo mailing list when you are seeking technical support. Without it, we can't help you. - DevTeam ------------------------------------------------------------ BTW, despite (or perhaps because of) the wealth of messages, some users are inclined to stop reading this log. If Mondo stopped for some reason, chances are it's detailed here. More than likely there's a message at the very end of this log that will tell you what is wrong. Please read it! ------------------------------------------------------------ [Main] mondorestore.c->main#2925: I am in disaster recovery mode [Main] mondorestore.c->main#2930: what time is it [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found afio at /usr/bin/afio running: which mkfs.vfat > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- /sbin/mkfs.vfat --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-cli.c->handle_incoming_parameters#96: Switches:- [Main] libmondo-cli.c->handle_incoming_parameters#100: -Z nuke [Main] mondorestore.c->main#3105: I must be in disaster recovery mode. [Main] mondorestore.c->main#3106: FYI, MOUNTLIST_FNAME = /tmp/mountlist.txt [Main] mondorestore.c->main#3108: About to call load_mountlist and load_raidtab [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#721: Entering read_cfg_file_into_bkpinfo [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#832: Backup medium is similar to CD-R[W] [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#842: Goody! ... bkpinfo->use_star is now true. [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#871: Internal tape block size has been custom-set to 32768 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#910: differential var = '0' [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#914: This is a regular (full) backup [Main] libmondo-mountlist.c->load_mountlist#829: Loading mountlist... [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/cciss/c0d0p2 [Main] libmondo-mountlist.c->load_mountlist#900: /dev/cciss/c0d0p2 lvm lvm 292824787 [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/root [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/root / ext3 0 [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/var [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/var /var ext3 0 [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/home [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/home /home ext3 0 [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/usr [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/usr /usr ext3 0 [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/opt [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/opt /opt ext3 0 [Main] libmondo-mountlist.c->load_mountlist#900: /dev/cciss/c0d0p1 /boot ext3 104391 /boot [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/swap [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/swap swap swap 0 [Main] libmondo-mountlist.c->load_mountlist#912: Mountlist loaded successfully. [Main] libmondo-mountlist.c->load_mountlist#913: 8 entries in mountlist [Main] libmondo-files.c->length_of_file#550: filename=/etc/raidtab Unable to openin filename (No such file or directory) [Main] libmondo-raid.c->load_raidtab_into_raidlist#611: Raidtab is very small or non-existent. Ignoring it. [Main] mondorestore.c->main#3113: Returned from calling load_mountlist and load_raidtab successfully [Main] mondorestore.c->main#3158: Send in the clowns. [Main] mondorestore.c->main#3162: nuking [Main] mondorestore.c->nuke_mode#769: nuke_mode --- starting [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2230: gcffa --- starting I'm thinking... running: mkdir -p /tmp/mondo.tmp.6aKJNj/mount.bootdisk > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2248: mountpt = /tmp/mondo.tmp.6aKJNj/mount.bootdisk; cfg_file=/tmp/mondo.tmp.6aKJNj/tmp/mondo-restore.cfg [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2251: gcffa --- we don't have cfg file yet. [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2255: gcffa --- calling mount_media now :) running: mount | grep -F /mnt/cdrom > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 [Main] libmondo-devices.c->mount_media#1451: (mount_media) --- command = mount /dev/cdrom -t iso9660 -o ro /mnt/cdrom running: mount /dev/cdrom -t iso9660 -o ro /mnt/cdrom > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-devices.c->mount_media#1466: Mounted media drive OK [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2258: gcffa --- managed to mount CD; so, no need for Plan B [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /mnt/cdrom mounted? [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2315: gcffa --- Plan B, a.k.a. untarring some file from all.tar.gz running: tar -zxvf /mnt/cdrom/images/all.tar.gz ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/i-want-my-lvm ./tmp/filelist.full.gz ./tmp/mountlist.txt --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2331: gcffa --- great! We've got the config file [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2336: cp -f /tmp/mondo.tmp.6aKJNj/tmp/mondo-restore.cfg /tmp/mondo.tmp.6aKJNj/tmp/mondo-restore.cfg [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2343: ... and I moved it successfully to /tmp/mondo.tmp.6aKJNj/tmp/mondo-restore.cfg [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2348: cp -f /tmp/mondo.tmp.6aKJNj/tmp/mountlist.txt /tmp/mondo.tmp.6aKJNj/tmp/mountlist.txt running: umount -d /mnt/cdrom > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) Recovered mondo-restore.cfg running: cp -f /tmp/mondo.tmp.6aKJNj/tmp/mondo-restore.cfg /tmp/mondo-restore.cfg > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: cp -f etc/raidtab /etc/ > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- cp: can't stat 'etc/raidtab': No such file or directory --------------------------------end of output------------------------------ ...ran with res=256 [Main] libmondo-mountlist.c->load_mountlist#829: Loading mountlist... [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/cciss/c0d0p2 [Main] libmondo-mountlist.c->load_mountlist#900: /dev/cciss/c0d0p2 lvm lvm 292824787 [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/root [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/root / ext3 0 [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/var [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/var /var ext3 0 [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/home [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/home /home ext3 0 [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/usr [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/usr /usr ext3 0 [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/opt [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/opt /opt ext3 0 [Main] libmondo-mountlist.c->load_mountlist#900: /dev/cciss/c0d0p1 /boot ext3 104391 /boot [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/swap [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/swap swap swap 0 [Main] libmondo-mountlist.c->load_mountlist#912: Mountlist loaded successfully. [Main] libmondo-mountlist.c->load_mountlist#913: 8 entries in mountlist [Main] mondo-prep.c->resize_mountlist_proportionately_to_suit_new_drives#2621: Resizing mountlist [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#665: Making list of drives [Main] mondo-prep.c->resize_mountlist_proportionately_to_suit_new_drives#2623: Back from MLoDiM [Main] libmondo-devices.c->get_phys_size_of_drive#1041: /dev/cciss/c0d0 --> -1 or 286070 --> 286070 Expanding entries to suit drive /dev/cciss/c0d0 (286070 MB) [Main] mondo-prep.c->create_mountlist_for_drive#2653: Creating list of partitions for drive /dev/cciss/c0d0 Disk /dev/cciss/c0d0 was 286063 MB; is now 286070 MB; Proportionally resizing partitions (factor ~= 1.00002) Changing /dev/cciss/c0d0p2 from 292824787 KB to 292831296 KB Changing /dev/cciss/c0d0p1 from 104391 KB to 104393 KB Last partition size calculated would be over-allocated, reducing /dev/cciss/c0d0p1 from 104393 KB to 104384 KB. final_size = 286070 MB Mountlist adjusted to suit current hard drive(s) [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#665: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#566: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1041: /dev/cciss/c0d0 --> -1 or 286070 --> 286070 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#413: /dev/cciss/c0d0 is 286070 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#423: Processing partition /dev/cciss/c0d0p1 on /dev/cciss/c0d0 #6 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#423: Processing partition /dev/cciss/c0d0p2 on /dev/cciss/c0d0 #0 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#525: Fine, no error in evaluate_drive_within_mountlist [Main] libmondo-mountlist.c->save_mountlist_to_disk#937: save_mountlist_to_disk() --- saving to /tmp/mountlist.txt Restoring Automatically [Main] mondo-prep.c->partition_everything#1985: partition_everything() --- starting Partitioning hard drives Stopping all LVMs, just in case [Main] mondo-prep.c->do_my_funky_lvm_stuff#239: STARTING [Main] mondo-prep.c->do_my_funky_lvm_stuff#240: OK, opened i-want-my-lvm. Shutting down LVM volumes... [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found lvm at /sbin/lvm Shutting down lv /dev/rootvg/var Shutting down lv /dev/rootvg/usr Shutting down lv /dev/rootvg/swap Shutting down lv /dev/rootvg/root Shutting down lv /dev/rootvg/opt Shutting down lv /dev/rootvg/home Shutting down vg rootvg [Main] mondo-prep.c->do_my_funky_lvm_stuff#268: Closed i-want-my-lvm. Finished erasing LVMs. [Main] mondo-prep.c->do_my_funky_lvm_stuff#417: ENDING [Main] mondo-prep.c->do_my_funky_lvm_stuff#422: Not many errors. Returning 0. Stopping all software RAID devices, just in case Done. [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#665: Making list of drives [Main] mondo-prep.c->partition_drive#1533: Partitioning drive /dev/cciss/c0d0 [Main] mondo-prep.c->partition_drive#1618: Found partition /dev/cciss/c0d0p1 in mountlist [Main] mondo-prep.c->partition_drive#1621: Wiping /dev/cciss/c0d0's partition table [Main] mondo-prep.c->partition_drive#1643: New, kernel-friendly partition remover [Main] mondo-prep.c->partition_device#1771: partition_device('/dev/cciss/c0d0', 1, 0, 'ext3', 104384) --- starting [Main] mondo-prep.c->partition_device#1790: Partitioning device /dev/cciss/c0d0p1 (101 MB) [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/cciss/c0d0p1 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d0p1 " > /dev/null 2> /dev/null' Found MBR partition table format type [Main] mondo-prep.c->partition_device#1869: Doing the new all-in-one fdisk thing [Main] mondo-prep.c->partition_device#1870: output = 'n p 1 +104384K ' [Main] mondo-prep.c->partition_device#1875: Successfully created partition 1 on /dev/cciss/c0d0 [Main] mondo-prep.c->partition_device#1881: Trying to set partition 1 type now on /dev/cciss/c0d0 [Main] mondo-prep.c->set_partition_type#2140: Setting /dev/cciss/c0d0p1's type to ext3 (83) [Main] mondo-prep.c->partition_device#1951: partition_device() --- leaving [Main] mondo-prep.c->partition_drive#1618: Found partition /dev/cciss/c0d0p2 in mountlist [Main] mondo-prep.c->partition_device#1771: partition_device('/dev/cciss/c0d0', 2, 1, 'lvm', 292831296) --- starting [Main] mondo-prep.c->partition_device#1790: Partitioning device /dev/cciss/c0d0p2 (285968 MB) [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/cciss/c0d0p2 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d0p2 " > /dev/null 2> /dev/null' Found MBR partition table format type [Main] mondo-prep.c->partition_device#1869: Doing the new all-in-one fdisk thing [Main] mondo-prep.c->partition_device#1870: output = 'n p 2 +292831296K ' [Main] mondo-prep.c->partition_device#1875: Successfully created partition 2 on /dev/cciss/c0d0 [Main] mondo-prep.c->partition_device#1881: Trying to set partition 2 type now on /dev/cciss/c0d0 [Main] mondo-prep.c->set_partition_type#2140: Setting /dev/cciss/c0d0p2's type to lvm (8e) [Main] mondo-prep.c->partition_device#1951: partition_device() --- leaving ------------------- fdisk.log looks like this ------------------ The number of cylinders for this disk is set to 36468. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Warning: partition 4 has empty type Command (m for help): Partition number (1-4): Warning: partition 3 has empty type Command (m for help): Partition number (1-4): Command (m for help): Selected partition 1 Command (m for help): 1: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (1-36468, default 1): Using default value 1 Last cylinder or +size or +sizeM or +sizeK (1-36468, default 36468): +104384K Command (m for help): Command (m for help): Command (m for help): p Disk /dev/cciss/c0d0: 299.9 GB, 299966445568 bytes 255 heads, 63 sectors/track, 36468 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/cciss/c0d0p1 1 14 112423+ 83 Linux Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 2 First cylinder (15-36468, default 15): Using default value 15 Last cylinder or +size or +sizeM or +sizeK (15-36468, default 36468): +292831296K Value out of range. Last cylinder or +size or +sizeM or +sizeK (15-36468, default 36468): Using default value 36468 Command (m for help): Command (m for help): p Disk /dev/cciss/c0d0: 299.9 GB, 299966445568 bytes 255 heads, 63 sectors/track, 36468 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/cciss/c0d0p1 1 14 112423+ 83 Linux /dev/cciss/c0d0p2 15 36468 292816755 83 Linux Command (m for help): t Partition number (1-4): 2 Hex code (type L to list codes): 8e Changed system type of partition 2 to 8e (Linux LVM) Command (m for help): Command (m for help): p Disk /dev/cciss/c0d0: 299.9 GB, 299966445568 bytes 255 heads, 63 sectors/track, 36468 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/cciss/c0d0p1 1 14 112423+ 83 Linux /dev/cciss/c0d0p2 15 36468 292816755 8e Linux LVM Command (m for help): p Disk /dev/cciss/c0d0: 299.9 GB, 299966445568 bytes 255 heads, 63 sectors/track, 36468 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/cciss/c0d0p1 1 14 112423+ 83 Linux /dev/cciss/c0d0p2 15 36468 292816755 8e Linux LVM Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks. The number of cylinders for this disk is set to 36468. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Command (m for help): Disk /dev/cciss/c0d0: 299.9 GB, 299966445568 bytes 255 heads, 63 sectors/track, 36468 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/cciss/c0d0p1 * 1 14 112423+ 83 Linux /dev/cciss/c0d0p2 15 36468 292816755 8e Linux LVM Command (m for help): The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks. ------------------- end of fdisk.log... ------------------ Done. Preparing to format your disk(s) Please wait. This may take a few minutes. [Main] mondo-prep.c->format_everything#965: format_everything (mountlist, interactively = false Formatting partitions [Main] mondo-prep.c->format_everything#977: Stopping all RAID devices [Main] mondo-prep.c->format_everything#983: Prepare soft-RAIDs [Main] mondo-prep.c->format_everything#986: Examining /dev/cciss/c0d0p2 [Main] mondo-prep.c->format_everything#986: Examining /dev/rootvg/root [Main] mondo-prep.c->format_everything#986: Examining /dev/rootvg/var [Main] mondo-prep.c->format_everything#986: Examining /dev/rootvg/home [Main] mondo-prep.c->format_everything#986: Examining /dev/rootvg/usr [Main] mondo-prep.c->format_everything#986: Examining /dev/rootvg/opt [Main] mondo-prep.c->format_everything#986: Examining /dev/cciss/c0d0p1 [Main] mondo-prep.c->format_everything#986: Examining /dev/rootvg/swap [Main] mondo-prep.c->format_everything#1013: Creating LVMs [Main] mondo-rstr-tools.c->wait_until_software_raids_are_prepped#2444: wait_until_software_raids_are_prepped Configuring LVM [Main] mondo-prep.c->do_my_funky_lvm_stuff#239: STARTING [Main] mondo-prep.c->do_my_funky_lvm_stuff#240: OK, opened i-want-my-lvm. Shutting down LVM volumes... [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found lvm at /sbin/lvm [Main] mondo-prep.c->do_my_funky_lvm_stuff#273: OK, rewound i-want-my-lvm. Doing funky stuff... lvm vgchange -an --> 0 echo y | lvm pvcreate -ff /dev/cciss/c0d0p2 --> 0 lvm vgscan --> 0 [Main] mondo-prep.c->do_my_funky_lvm_stuff#305: Deleting old entries at /dev/rootvg running: rm -Rf /dev/rootvg > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: lvm vgscan > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- Reading all physical volumes. This may take a while... File descriptor 3 (/tmp/prep.sh) leaked on lvm invocation. Parent PID 14520: sh File descriptor 4 (/proc/mdstat) leaked on lvm invocation. Parent PID 14520: sh File descriptor 5 (/proc/mdstat) leaked on lvm invocation. Parent PID 14520: sh File descriptor 6 (/proc/mdstat) leaked on lvm invocation. Parent PID 14520: sh File descriptor 7 (/proc/mdstat) leaked on lvm invocation. Parent PID 14520: sh File descriptor 8 (/tmp/i-want-my-lvm) leaked on lvm invocation. Parent PID 14520: sh No volume groups found --------------------------------end of output------------------------------ ...ran just fine. :-) running: lvm pvscan > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- PV /dev/cciss/c0d0p2 lvm2 [279.25 GB] Total: 1 [279.25 GB] / in use: 0 [0 ] / in no VG: 1 [279.25 GB] File descriptor 3 (/tmp/prep.sh) leaked on lvm invocation. Parent PID 14524: sh File descriptor 4 (/proc/mdstat) leaked on lvm invocation. Parent PID 14524: sh File descriptor 5 (/proc/mdstat) leaked on lvm invocation. Parent PID 14524: sh File descriptor 6 (/proc/mdstat) leaked on lvm invocation. Parent PID 14524: sh File descriptor 7 (/proc/mdstat) leaked on lvm invocation. Parent PID 14524: sh File descriptor 8 (/tmp/i-want-my-lvm) leaked on lvm invocation. Parent PID 14524: sh --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-prep.c->do_my_funky_lvm_stuff#314: After working around potentially broken i-want-my-lvm, incoming[] is now '# lvm vgcreate rootvg -l 0 -p 0 -s 32.00m /dev/cciss/c0d0p2 ' lvm vgcreate rootvg -l 0 -p 0 -s 32.00m /dev/cciss/c0d0p2 --> 0 In case you're interested... running: lvm vgscan > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- Reading all physical volumes. This may take a while... Found volume group "rootvg" using metadata type lvm2 File descriptor 3 (/tmp/prep.sh) leaked on lvm invocation. Parent PID 14530: sh File descriptor 4 (/proc/mdstat) leaked on lvm invocation. Parent PID 14530: sh File descriptor 5 (/proc/mdstat) leaked on lvm invocation. Parent PID 14530: sh File descriptor 6 (/proc/mdstat) leaked on lvm invocation. Parent PID 14530: sh File descriptor 7 (/proc/mdstat) leaked on lvm invocation. Parent PID 14530: sh File descriptor 8 (/tmp/i-want-my-lvm) leaked on lvm invocation. Parent PID 14530: sh --------------------------------end of output------------------------------ ...ran just fine. :-) running: lvm pvscan > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- PV /dev/cciss/c0d0p2 VG rootvg lvm2 [279.25 GB / 279.25 GB free] Total: 1 [279.25 GB] / in use: 1 [279.25 GB] / in no VG: 0 [0 ] File descriptor 3 (/tmp/prep.sh) leaked on lvm invocation. Parent PID 14534: sh File descriptor 4 (/proc/mdstat) leaked on lvm invocation. Parent PID 14534: sh File descriptor 5 (/proc/mdstat) leaked on lvm invocation. Parent PID 14534: sh File descriptor 6 (/proc/mdstat) leaked on lvm invocation. Parent PID 14534: sh File descriptor 7 (/proc/mdstat) leaked on lvm invocation. Parent PID 14534: sh File descriptor 8 (/tmp/i-want-my-lvm) leaked on lvm invocation. Parent PID 14534: sh --------------------------------end of output------------------------------ ...ran just fine. :-) lvm vgchange -a y rootvg --> 0 lvm lvcreate -L 256.00m -r auto -n home rootvg --> 0 lvm lvcreate -L 51200m -r auto -n opt rootvg --> 0 lvm lvcreate -L 2048m -r auto -n root rootvg --> 0 lvm lvcreate -L 16384m -r auto -n swap rootvg --> 0 lvm lvcreate -L 3072m -r auto -n usr rootvg --> 0 lvm lvcreate -L 3072m -r auto -n var rootvg --> 0 lvm vgscan --> 0 [Main] mondo-prep.c->do_my_funky_lvm_stuff#400: Closed i-want-my-lvm. Finished doing funky stuff. [Main] mondo-prep.c->do_my_funky_lvm_stuff#417: ENDING [Main] mondo-prep.c->do_my_funky_lvm_stuff#422: Not many errors. Returning 0. LVM initialized OK [Main] mondo-prep.c->format_everything#1052: Formatting regulars [Main] mondo-prep.c->format_everything#1065: Not formatting /dev/cciss/c0d0p2 - it's an LVM [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/root mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/root " > /dev/null 2> /dev/null' running: sh -c 'echo -en "y\ny\ny\n" | mkfs -t ext3 -F -q /dev/rootvg/root' > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) ...OK [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/var mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/var " > /dev/null 2> /dev/null' running: sh -c 'echo -en "y\ny\ny\n" | mkfs -t ext3 -F -q /dev/rootvg/var' > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) ...OK [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/home mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/home " > /dev/null 2> /dev/null' running: sh -c 'echo -en "y\ny\ny\n" | mkfs -t ext3 -F -q /dev/rootvg/home' > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) ...OK [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/usr mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/usr " > /dev/null 2> /dev/null' running: sh -c 'echo -en "y\ny\ny\n" | mkfs -t ext3 -F -q /dev/rootvg/usr' > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) ...OK [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/opt mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/opt " > /dev/null 2> /dev/null' running: sh -c 'echo -en "y\ny\ny\n" | mkfs -t ext3 -F -q /dev/rootvg/opt' > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) ...OK [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/cciss/c0d0p1 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d0p1 " > /dev/null 2> /dev/null' running: sh -c 'echo -en "y\ny\ny\n" | mkfs -t ext3 -F -q /dev/cciss/c0d0p1' > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) ...OK [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/swap mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/swap " > /dev/null 2> /dev/null' running: sh -c 'echo -en "y\ny\ny\n" | mkswap /dev/rootvg/swap' > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- Setting up swapspace version 1, size = 17179865 kB --------------------------------end of output------------------------------ ...ran just fine. :-) ...OK Done. [Main] mondo-prep.c->format_everything#1116: format_everything () - finished successfully Mounting devices [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/root mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/root " > /dev/null 2> /dev/null' [Main] mondo-rstr-tools.c->mount_device#478: Mounting device /dev/rootvg/root [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl running: mkdir -p /mnt/RESTORING > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->mount_device#507: command='mount -t ext3 /dev/rootvg/root -o rw,user_xattr,acl /mnt/RESTORING 2>> /var/log/mondorestore.log' running: mount -t ext3 /dev/rootvg/root -o rw,user_xattr,acl /mnt/RESTORING 2>> /var/log/mondorestore.log > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/cciss/c0d0p1 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d0p1 " > /dev/null 2> /dev/null' [Main] mondo-rstr-tools.c->mount_device#478: Mounting device /dev/cciss/c0d0p1 [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl running: mkdir -p /mnt/RESTORING/boot > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->mount_device#507: command='mount -t ext3 /dev/cciss/c0d0p1 -o rw,user_xattr,acl /mnt/RESTORING/boot 2>> /var/log/mondorestore.log' running: mount -t ext3 /dev/cciss/c0d0p1 -o rw,user_xattr,acl /mnt/RESTORING/boot 2>> /var/log/mondorestore.log > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/home mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/home " > /dev/null 2> /dev/null' [Main] mondo-rstr-tools.c->mount_device#478: Mounting device /dev/rootvg/home [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl running: mkdir -p /mnt/RESTORING/home > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->mount_device#507: command='mount -t ext3 /dev/rootvg/home -o rw,user_xattr,acl /mnt/RESTORING/home 2>> /var/log/mondorestore.log' running: mount -t ext3 /dev/rootvg/home -o rw,user_xattr,acl /mnt/RESTORING/home 2>> /var/log/mondorestore.log > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/opt mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/opt " > /dev/null 2> /dev/null' [Main] mondo-rstr-tools.c->mount_device#478: Mounting device /dev/rootvg/opt [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl running: mkdir -p /mnt/RESTORING/opt > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->mount_device#507: command='mount -t ext3 /dev/rootvg/opt -o rw,user_xattr,acl /mnt/RESTORING/opt 2>> /var/log/mondorestore.log' running: mount -t ext3 /dev/rootvg/opt -o rw,user_xattr,acl /mnt/RESTORING/opt 2>> /var/log/mondorestore.log > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/usr mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/usr " > /dev/null 2> /dev/null' [Main] mondo-rstr-tools.c->mount_device#478: Mounting device /dev/rootvg/usr [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl running: mkdir -p /mnt/RESTORING/usr > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->mount_device#507: command='mount -t ext3 /dev/rootvg/usr -o rw,user_xattr,acl /mnt/RESTORING/usr 2>> /var/log/mondorestore.log' running: mount -t ext3 /dev/rootvg/usr -o rw,user_xattr,acl /mnt/RESTORING/usr 2>> /var/log/mondorestore.log > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/var mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/var " > /dev/null 2> /dev/null' [Main] mondo-rstr-tools.c->mount_device#478: Mounting device /dev/rootvg/var [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl running: mkdir -p /mnt/RESTORING/var > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->mount_device#507: command='mount -t ext3 /dev/rootvg/var -o rw,user_xattr,acl /mnt/RESTORING/var 2>> /var/log/mondorestore.log' running: mount -t ext3 /dev/rootvg/var -o rw,user_xattr,acl /mnt/RESTORING/var 2>> /var/log/mondorestore.log > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/cciss/c0d0p2 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d0p2 " > /dev/null 2> /dev/null' [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/swap mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/swap " > /dev/null 2> /dev/null' [Main] mondo-rstr-tools.c->mount_device#478: Mounting device /dev/rootvg/swap [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl running: swapon /dev/rootvg/swap > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) All partitions were mounted OK. Done. [Main] mondo-rstr-tools.c->mount_device#478: Mounting device /proc running: mkdir -p /mnt/RESTORING/proc > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->mount_device#507: command='mount -t proc /proc /mnt/RESTORING/proc 2>> /var/log/mondorestore.log' running: mount -t proc /proc /mnt/RESTORING/proc 2>> /var/log/mondorestore.log > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->mount_device#478: Mounting device /sys [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl running: mkdir -p /mnt/RESTORING/sys > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->mount_device#507: command='mount -t sysfs /sys -o rw,user_xattr,acl /mnt/RESTORING/sys 2>> /var/log/mondorestore.log' running: mount -t sysfs /sys -o rw,user_xattr,acl /mnt/RESTORING/sys 2>> /var/log/mondorestore.log > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: df -m > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- Filesystem 1M-blocks Used Available Use Mounted on rootfs 150 64 86 43 / /dev/root 150 64 86 43 / none 5 1 5 5 /dev none 24148 0 24148 0 /dev/shm /dev/shm 256 1 256 1 /tmp /dev/rootvg/root 2016 68 1847 4 /mnt/RESTORING /dev/cciss/c0d0p1 107 6 96 6 /mnt/RESTORING/boot /dev/rootvg/home 248 11 226 5 /mnt/RESTORING/home /dev/rootvg/opt 50397 180 47657 1 /mnt/RESTORING/opt /dev/rootvg/usr 3024 69 2802 3 /mnt/RESTORING/usr /dev/rootvg/var 3024 69 2802 3 /mnt/RESTORING/var --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondorestore.c->nuke_mode#868: Restoring everything [Main] mondorestore.c->restore_everything#2697: restore_everything() --- starting running: mkdir -p /mnt/RESTORING > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondorestore.c->restore_everything#2704: Changing dir to /mnt/RESTORING [Main] mondorestore.c->restore_everything#2711: path is now /mnt/RESTORING [Main] mondorestore.c->restore_everything#2712: restoring everything [Main] libmondo-files.c->find_home_of_exe#372: find_home_of_exe() --- Could not find petris Preparing to read your archives running: mount | grep -F /mnt/cdrom > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 [Main] libmondo-devices.c->mount_media#1451: (mount_media) --- command = mount /dev/cdrom -t iso9660 -o ro /mnt/cdrom running: mount /dev/cdrom -t iso9660 -o ro /mnt/cdrom > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-devices.c->mount_media#1466: Mounted media drive OK Restoring OS and data from CD/USB Restoring from archives [Main] mondorestore.c->restore_all_tarballs_from_CD#2241: Insisting on 1st media, so that I can have a look at LAST-FILELIST-NUMBER [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /mnt/cdrom mounted? Restoring from CDR #1 [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /mnt/cdrom mounted? No tarballs. Strange. Maybe you only backed up freakin' big files? Reassembling large files [Main] mondorestore.c->restore_all_biggiefiles_from_CD#2102: OK, no biggielist; not restoring biggiefiles [Main] libmondo-files.c->length_of_file#550: filename=/etc/raidtab Unable to openin filename (No such file or directory) running: ps | grep " petris " | grep -v "grep" | awk '{print $1;}' > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: kill `ps | grep " petris " | grep -v "grep" | awk '{print $1;}'` > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec] --------------------------------end of output------------------------------ ...ran with res=256 [Main] mondorestore.c->restore_everything#2754: restore_everything() --- leaving running: tar cf - /dev | ( cd /mnt/RESTORING ; tar xf - ) > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->run_boot_loader#1388: run_boot_loader: device='/dev/cciss/c0d0', name='GRUB' Non-interactive mode: no way to give you the keyboard so that you re-generate your initrd. Hope it's OK [Main] mondo-rstr-tools.c->offer_to_make_initrd#1343: Non-interactive mode: no way to give you the keyboard so that you re-generate your initrd. Hope it's OK [Main] libmondo-files.c->find_home_of_exe#372: find_home_of_exe() --- Could not find pico [Main] libmondo-files.c->find_home_of_exe#372: find_home_of_exe() --- Could not find nano [Main] libmondo-files.c->find_home_of_exe#372: find_home_of_exe() --- Could not find e3em [Main] libmondo-files.c->find_home_of_exe#372: find_home_of_exe() --- Could not find e3vi [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found vi at /bin/vi running: which grub-MR > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- /mondo/grub-MR --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->run_grub#1503: Yay! grub-MR found... [Main] mondo-rstr-tools.c->run_grub#1505: command = grub-MR /dev/cciss/c0d0 /tmp/mountlist.txt Running GRUB... [Main] mondo-rstr-tools.c->run_grub#1584: grub-MR /dev/cciss/c0d0 /tmp/mountlist.txt Now I'll use grub-install Launching: chroot /mnt/RESTORING grub-install /dev/cciss/c0d0 chroot: can't execute 'grub-install': No such file or directory grub-install returned 127 Now I'll use grub2-install chroot: can't execute 'grub2-install': No such file or directory grub2-install returned 127 Trying a hack Checking usr/lib/grub/* Cannot find BOOTPATHNAME .............Cool. device (hd0) /dev/cciss/c0d root (hd0,-1) setup (hd0) quit chroot: can't execute 'grub': No such file or directory Hack returned res=0 running: grub-MR /dev/cciss/c0d0 /tmp/mountlist.txt > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- Checking usr/lib/grub/* Cannot find BOOTPATHNAME .............Cool. --------------------------------end of output------------------------------ ...ran just fine. :-) Done. Your boot loader ran OK [Main] mondorestore.c->nuke_mode#873: Great! Boot loader was installed. No need for msg at end. running: touch /mnt/RESTORING/var/log/pacct > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- touch: /mnt/RESTORING/var/log/pacct: No such file or directory --------------------------------end of output------------------------------ ...ran with res=256 running: touch /mnt/RESTORING/var/account/pacct > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- touch: /mnt/RESTORING/var/account/pacct: No such file or directory --------------------------------end of output------------------------------ ...ran with res=256 running: ls /mnt/RESTORING /tmp > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- /mnt/RESTORING: boot dev home lost+found opt proc sys usr var /tmp: CDROM-LIVES-HERE FILES-IN-FILELIST KEYMAP-LIVES-HERE LAST-FILELIST-NUMBER USE-UDEV USING-COMP USING-GZIP USING-STAR biggielist.txt feed.txt filelist.full.gz fstab groovy-stuff grub.output i-want-my-lvm isodir mondo-restore.cfg mondo-restore.log mondo.scratch.GesK46 mondo.tmp.6aKJNj mondorestore.log mount.log mountlist.changed mountlist.original mountlist.txt mountlist.txt.orig myssh null oid.log oid1.log out.sh prep.sh start-lvm stderr stdin stdout tmpfs --------------------------------end of output------------------------------ ...ran just fine. :-) running: mkdir -p /mnt/RESTORING/var/run/console > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: chmod 777 /mnt/RESTORING/dev/null > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: cd /mnt/RESTORING; for i in `ls home/`; do echo "Moving $i's spurious files to $i/.disabled"; mkdir "$i"/.disabled ; mv -f "$i"/.DCOP* "$i"/.MCOP* "$i"/.*authority "$i"/.kde/tmp* "$i"/.kde/socket* "$i"/.disabled/ ; done > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- Moving lost+found's spurious files to lost+found/.disabled mv: can't rename 'lost+found/.DCOP*': No such file or directory mv: can't rename 'lost+found/.MCOP*': No such file or directory mv: can't rename 'lost+found/.*authority': No such file or directory mv: can't rename 'lost+found/.kde/tmp*': No such file or directory mv: can't rename 'lost+found/.kde/socket*': No such file or directory --------------------------------end of output------------------------------ ...ran with res=256 running: rm -f /mnt/RESTORING/var/run/*.pid > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: rm -f /mnt/RESTORING/var/lock/subsys/* > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: df -m > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- Filesystem 1M-blocks Used Available Use Mounted on rootfs 150 64 86 43 / /dev/root 150 64 86 43 / none 5 1 5 5 /dev none 24148 0 24148 0 /dev/shm /dev/shm 256 1 256 1 /tmp /dev/rootvg/root 2016 68 1846 4 /mnt/RESTORING /dev/cciss/c0d0p1 107 6 96 6 /mnt/RESTORING/boot /dev/rootvg/home 248 11 226 5 /mnt/RESTORING/home /dev/rootvg/opt 50397 180 47657 1 /mnt/RESTORING/opt /dev/rootvg/usr 3024 69 2802 3 /mnt/RESTORING/usr /dev/rootvg/var 3024 69 2802 3 /mnt/RESTORING/var /dev/cdrom 372 372 0 100 /mnt/cdrom --------------------------------end of output------------------------------ ...ran just fine. :-) Unmounting devices running: ps | grep buffer | grep -v "grep buffer" > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 running: cp -f /var/log/mondorestore.log /mnt/RESTORING/var/log > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: umount /mnt/RESTORING/proc > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: umount /mnt/RESTORING/sys > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/swap mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/swap " > /dev/null 2> /dev/null' [Main] mondo-rstr-tools.c->unmount_all_devices#2114: Unmounting device /dev/rootvg/swap ...not mounted anyway :-) OK [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/var mounted? running: umount /mnt/RESTORING/var > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->unmount_all_devices#2114: Unmounting device /dev/rootvg/var [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/usr mounted? running: umount /mnt/RESTORING/usr > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->unmount_all_devices#2114: Unmounting device /dev/rootvg/usr [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/opt mounted? running: umount /mnt/RESTORING/opt > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->unmount_all_devices#2114: Unmounting device /dev/rootvg/opt [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/home mounted? running: umount /mnt/RESTORING/home > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->unmount_all_devices#2114: Unmounting device /dev/rootvg/home [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/cciss/c0d0p1 mounted? running: umount /mnt/RESTORING/boot > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->unmount_all_devices#2114: Unmounting device /dev/cciss/c0d0p1 [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/root mounted? running: mkdir -p /mnt/RESTORING/var/lock > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: mkdir -p /mnt/RESTORING/var/run > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: umount /mnt/RESTORING/ > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->unmount_all_devices#2114: Unmounting device /dev/rootvg/root Done. All partitions were unmounted OK. Using tune2fs/tune4fs to identify your ext2,3,4 partitions 10:16 Identifying your drives with FS tune tool 10:16 Nothing to do on /dev/rootvg/root / ext3 defaults 1 1 10:16 Nothing to do on /dev/rootvg/var /var ext3 defaults 1 2 10:16 Nothing to do on /dev/rootvg/home /home ext3 defaults 1 2 10:16 Nothing to do on /dev/rootvg/usr /usr ext3 defaults 1 2 10:16 Nothing to do on /dev/rootvg/opt /opt ext3 defaults 1 2 10:16 Running tune2fs -L /boot /dev/cciss/c0d0p1 10:16 Nothing to do on tmpfs /dev/shm tmpfs defaults 0 0 10:16 Nothing to do on devpts /dev/pts devpts gid=5,mode=620 0 0 10:16 Nothing to do on sysfs /sys sysfs defaults 0 0 10:16 Nothing to do on proc /proc proc defaults 0 0 10:16 Nothing to do on /dev/rootvg/swap swap swap defaults 0 0 10:16 Labeling complete. running: label-partitions-as-necessary /tmp/mountlist.txt < /tmp/fstab >> /var/log/mondorestore.log 2>> /var/log/mondorestore.log > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- tune2fs 1.39 (29-May-2006) --------------------------------end of output------------------------------ ...ran just fine. :-) Done. Mondo has restored your system. Please wait for the command prompt. Then remove the backup media and reboot. Please visit our website at http://www.mondorescue.org for more information. Mondo has restored your system. Please wait for the command prompt. Then remove the backup media and reboot. Please visit our website at http://www.mondorescue.org for more information. running: sync > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /mnt/cdrom mounted? running: umount -d /mnt/cdrom > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-devices.c->eject_device#255: Ejecting /dev/cdrom running: eject /dev/cdrom > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 Run complete. Please remove media and reboot. [Main] mondorestore.c->main#3235: No post-nuke found. Restore log (/var/log/mondorestore.log) copied to /var/log on your hard disk Mondo-restore is exiting (retval=0) root is mounted at /dev/root No, Schlomo, that doesn't mean /dev/root is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [Main] libmondo-devices.c->am_I_in_disaster_recovery_mode#167: Is this a ramdisk? result = 1 running: mount / -o remount,rw > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: umount -d /mnt/cdrom > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err --------------------------------start of output----------------------------- Command failed (Invalid argument) --------------------------------end of output------------------------------ ...ran with res=256 [Main] ../common/newt-specific.c->finish#445: Calling newtFinished() 10:22 Launching Shell