15:14 Preparing udev environment... 15:14 udev started manually 15:14 Discovering with udevsettle 15:14 Extracted additional /dev entries OK. 15:14 Redirecting serial to /dev/tty 15:14 Trying 'mount /dev/shm -t tmpfs -o size=128m' 15:14 Great. Pivot succeeded w/ size=128m 15:14 Successfully mounted dynamic /tmp ramdisk 15:15 find-and-mount-cdrom --- starting 15:15 Trying /dev/hda 15:15 It's not in /dev/hda; I'll keep looking 15:15 Trying /dev/hdb 15:15 It's not in /dev/hdb; I'll keep looking 15:15 Trying /dev/hdc 15:15 It's not in /dev/hdc; I'll keep looking 15:15 Trying /dev/hdd 15:15 /dev/hdd has a CD-ROM in it 15:15 CD-ROM found at /dev/hdd 15:15 /dev/hdd is where the Mondo CD lives. 15:15 CD-ROM found and mounted at /dev/hdd 15:15 find-and-mount-cdrom --- leaving (0) 15:15 OK, I am running on a CD-ROM. Good. 15:15 Installing additional tools ... 15:15 Starting install-additional-tools 15:15 PLEASE WAIT. Untarring data content 15:15 Populating / with tar file content... 15:15 Installing and removing BOOTLOADER.DEVICE BOOTLOADER.MBR BOOTLOADER.NAME FILES-IN-FILELIST LAST-FILELIST-NUMBER bin dev etc lib mondo sbin tmp usr 15:15 Done. 15:15 Exiting install-additional-tools 15:15 klogd and syslogd have been started. 15:15 Using /etc/console/boottime.kmap.gz keyboard map. 15:15 RAID controller(s) detected. Pausing 10 seconds to let them warm up. 15:15 Running 'mdadm' 15:15 Running 'mdadm /dev/md2' with user supplied /etc/mdadm/mdadm.conf 15:15 Running 'mdadm /dev/md0' with user supplied /etc/mdadm/mdadm.conf 15:15 Running 'mdadm /dev/md1' with user supplied /etc/mdadm/mdadm.conf 15:15 LVM's have been started. 15:15 OK, we've found /mnt/cdrom/archives/*; great. 15:15 Re-jigging mondo-restore.cfg because you backed up to ISOs and then burned them to CDs 15:15 Done re-jigging. Yay. 15:15 init (from mindi v2.1.1-r2957) 15:15 /proc/cmdline is: 15:15 ---------- initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=110592 nuke devfs=nomount noresume selinux=0 barrier=off udevtimeout=10 BOOT_IMAGE=/vmlinuz 15:15 ---------- 15:15 df result: 15:15 ---------- Filesystem 1K-blocks Used Available Use% Mounted on none 5120 4 5116 1% /dev none 1684564 0 1684564 0% /dev/shm /dev/shm 131072 284 130788 1% /tmp /dev/hdd 715880 715880 0 100% /mnt/cdrom 15:15 ------------- 15:15 mount result: 15:15 ------------- rootfs on / type rootfs (rw) /proc on /proc type proc (rw) /sys on /sys type sysfs (rw) none on /dev type tmpfs (rw,size=5120k,mode=755) none on /dev/pts type devpts (rw,mode=620) none on /dev/shm type tmpfs (rw) /dev/shm on /tmp type tmpfs (rw,size=131072k) /dev/hdd on /mnt/cdrom type iso9660 (ro) 15:15 ------------- 15:15 lsmod result: 15:15 ------------- Module Size Used by thermal 15228 0 button 6096 0 wmi 6440 0 processor 32576 5 thermal fan 4196 0 paride 7008 0 atiixp 3396 0 [permanent] serio_raw 4740 0 joydev 8480 0 psmouse 32336 0 evdev 8000 0 pcspkr 2432 0 atl1c 26020 0 imm 9164 0 ppa 9164 0 parport_pc 22500 0 parport 31084 4 paride,imm,ppa,parport_pc shpchp 25528 0 pci_hotplug 23460 1 shpchp thermal_sys 10856 3 thermal,processor,fan dm_round_robin 2656 0 raid456 117008 0 dm_hp_sw 2496 0 raid0 6400 0 multipath 6208 0 dm_snapshot 14340 0 dm_mirror 15136 0 dm_log 8452 1 dm_mirror dm_emc 4384 0 dm_zero 1760 0 linear 4608 0 dm_rdac 5896 0 dm_multipath 15080 4 dm_round_robin,dm_hp_sw,dm_emc,dm_rdac dm_mod 46376 5 dm_snapshot,dm_mirror,dm_log,dm_zero,dm_multipath raid10 18656 0 raid1 17984 0 md_mod 67164 6 raid456,raid0,multipath,linear,raid10,raid1 jbd2 46552 0 ext3 105672 0 xfs 458392 0 ocfs2_dlm 171396 0 ocfs2_nodemanager 139560 1 ocfs2_dlm configfs 20244 2 ocfs2_nodemanager nfsd 186672 0 ext2 54440 0 reiserfs 190112 0 jbd 39540 1 ext3 minix 23812 0 msdos 6944 0 mbcache 7108 2 ext3,ext2 jfs 148908 0 crc16 2048 0 zlib_deflate 17624 0 ipv6 235396 18 async_xor 3520 1 raid456 xor 14696 2 raid456,async_xor async_memcpy 2304 1 raid456 async_tx 6316 3 raid456,async_xor,async_memcpy snd 45636 0 soundcore 6368 1 snd echo 4928 0 ahci 23596 0 ata_generic 4676 0 ata_piix 14404 0 pata_marvell 3488 0 pata_sis 3040 0 sata_nv 19848 0 sata_promise 9796 0 sata_svw 5124 0 sata_via 6980 0 libata 140448 9 ahci,ata_generic,ata_piix,pata_marvell,pata_sis,sata_nv,sata_promise,sata_svw,sata_via dock 8304 1 libata cciss 51620 0 loop 12748 0 virtio_blk 4744 0 dca 5092 0 edd 7208 0 usbkbd 5024 0 ide_cd_mod 27684 1 ide_disk 10496 0 ide_floppy 12704 0 ide_generic 2464 0 [permanent] ide_tape 21424 0 amd74xx 7752 0 [permanent] cmd64x 5216 0 [permanent] jmicron 2208 0 [permanent] serverworks 4932 0 [permanent] sis5513 6788 0 [permanent] via82cxxx 6948 0 [permanent] ide_core 96168 12 atiixp,ide_cd_mod,ide_disk,ide_floppy,ide_generic,ide_tape,amd74xx,cmd64x,jmicron,serverworks,sis5513,via82cxxx raw1394 19708 0 ieee1394 75832 1 raw1394 mptctl 21028 0 mptfc 12068 0 mptsas 22888 0 mptspi 12936 0 mptscsih 21824 3 mptfc,mptsas,mptspi mptbase 51108 5 mptctl,mptfc,mptsas,mptspi,mptscsih i2o_block 8332 0 i2o_core 31736 1 i2o_block 3c59x 35624 0 8139cp 16800 0 8139too 20384 0 e100 28908 0 e1000 102656 0 e1000e 91144 0 eepro100 25200 0 forcedeth 45072 0 igb 63428 0 ne2k_pci 7968 0 8390 8256 1 ne2k_pci pcnet32 27396 0 mii 4896 6 3c59x,8139cp,8139too,e100,eepro100,pcnet32 libphy 17280 0 r8169 27876 0 tg3 84676 0 virtio_net 6752 0 pcmcia_core 31892 0 3w_9xxx 25924 0 3w_xxxx 21344 0 BusLogic 20052 0 aacraid 57800 0 advansys 70592 0 aic79xx 145560 0 aic7xxx 117592 0 arcmsr 18720 0 atp870u 25056 0 dc395x 28460 0 dmx3191d 9920 0 gdth 71112 0 initio 14948 0 iscsi_tcp 14948 0 libiscsi 23712 1 iscsi_tcp megaraid 31304 0 megaraid_mbox 25872 0 megaraid_mm 8284 1 megaraid_mbox megaraid_sas 26000 0 nsp32 19600 0 osst 43420 0 qla1280 112876 0 qlogicfas408 6528 0 scsi_transport_fc 35908 1 mptfc scsi_tgt 11272 1 scsi_transport_fc scsi_transport_iscsi 25112 2 iscsi_tcp,libiscsi scsi_transport_sas 25472 1 mptsas sd_mod 22232 0 sg 26964 0 sr_mod 13316 0 cdrom 30176 2 ide_cd_mod,sr_mod st 30748 0 sym53c8xx 62936 0 scsi_transport_spi 19840 5 mptspi,aic79xx,aic7xxx,dmx3191d,sym53c8xx tmscsim 17568 0 ehci_hcd 28428 0 ohci_hcd 18500 0 uhci_hcd 18672 0 usbserial 26472 0 usb_storage 77120 0 scsi_mod 129548 44 imm,ppa,dm_hp_sw,dm_rdac,libata,cciss,mptctl,mptfc,mptsas,mptspi,mptscsih,3w_9xxx,3w_xxxx,BusLogic,aacraid,advansys,aic79xx,aic7xxx,arcmsr,atp870u,dc395x,dmx3191d,gdth,initio,iscsi_tcp,libiscsi,megaraid,megaraid_mbox,megaraid_sas,nsp32,osst,qla1280,scsi_transport_fc,scsi_tgt,scsi_transport_iscsi,scsi_transport_sas,sd_mod,sg,sr_mod,st,sym53c8xx,scsi_transport_spi,tmscsim,usb_storage virtio_balloon 3972 0 virtio_pci 5152 0 exportfs 3936 1 nfsd fuse 42908 0 isofs 28196 1 nfs 214504 0 lockd 54568 2 nfsd,nfs nfs_acl 2912 2 nfsd,nfs nls_cp437 5568 0 nls_iso8859_1 3936 0 nls_utf8 1760 1 vfat 9152 0 fat 40864 2 msdos,vfat nls_base 6820 7 jfs,isofs,nls_cp437,nls_iso8859_1,nls_utf8,vfat,fat libcrc32c 2656 0 zlib_inflate 14144 1 isofs auth_rpcgss 33952 1 nfsd sunrpc 162592 7 nfsd,nfs,lockd,nfs_acl,auth_rpcgss usbhid 35872 0 hid 33184 1 usbhid usbcore 118224 8 usbkbd,ehci_hcd,ohci_hcd,uhci_hcd,usbserial,usb_storage,usbhid ff_memless 4392 1 usbhid 15:15 ------------- 15:15 dmesg result: 15:15 ------------- [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-29) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Sun Mar 4 22:19:19 UTC 2012 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable) [ 0.000000] BIOS-e820: 00000000cfe90000 - 00000000cfea8000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfed0000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] Warning only 4GB will be used. [ 0.000000] Use a HIGHMEM64G enabled kernel. [ 0.000000] 3200MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at [c00ff780] 000ff780 [ 0.000000] Entering add_active_range(0, 0, 1048576) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 1048576 [ 0.000000] On node 0 totalpages: 1048576 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 6400 pages used for memmap [ 0.000000] HighMem zone: 812800 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000FB470, 0024 (r2 ACPIAM) [ 0.000000] ACPI: XSDT CFE90100, 005C (r1 061110 XSDT0958 20100611 MSFT 97) [ 0.000000] ACPI: FACP CFE90290, 00F4 (r3 061110 FACP0958 20100611 MSFT 97) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20080321] [ 0.000000] ACPI: DSDT CFE90450, D3CB (r1 A1467 A1467001 1 INTL 20060113) [ 0.000000] ACPI: FACS CFEA8000, 0040 [ 0.000000] ACPI: APIC CFE90390, 007C (r1 061110 APIC0958 20100611 MSFT 97) [ 0.000000] ACPI: MCFG CFE90410, 003C (r1 061110 OEMMCFG 20100611 MSFT 97) [ 0.000000] ACPI: OEMB CFEA8040, 0072 (r1 061110 OEMB0958 20100611 MSFT 97) [ 0.000000] ACPI: SRAT CFE9F450, 00E8 (r1 AMD FAM_F_10 2 AMD 1) [ 0.000000] ACPI: HPET CFE9F540, 0038 (r1 061110 OEMHPET 20100611 MSFT 97) [ 0.000000] ACPI: SSDT CFE9F580, 0924 (r1 A M I POWERNOW 1 AMD 1) [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at d0000000 (gap: cff00000:30000000) [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 37992 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 6 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384 [ 0.000000] Kernel command line: initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=110592 nuke devfs=nomount noresume selinux=0 barrier=off udevtimeout=10 BOOT_IMAGE=/vmlinuz [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Detected 3013.474 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 3361720k/4194304k available (1772k kernel code, 43432k reserved, 749k data, 244k init, 2488896k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) [ 0.004000] .data : 0xc02bb055 - 0xc0376620 ( 749 kB) [ 0.004000] .text : 0xc0100000 - 0xc02bb055 (1772 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] hpet clockevent registered [ 0.084007] Calibrating delay using timer specific routine.. 6031.01 BogoMIPS (lpj=12062032) [ 0.084084] Security Framework initialized [ 0.084117] SELinux: Disabled at boot. [ 0.084147] Capability LSM initialized [ 0.084185] Mount-cache hash table entries: 512 [ 0.084288] Initializing cgroup subsys ns [ 0.084320] Initializing cgroup subsys cpuacct [ 0.084351] Initializing cgroup subsys devices [ 0.084391] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.084423] CPU: L2 Cache: 512K (64 bytes/line) [ 0.084454] CPU 0(4) -> Core 0 [ 0.084485] Intel machine check architecture supported. [ 0.084517] Intel machine check reporting enabled on CPU#0. [ 0.084552] Checking 'hlt' instruction... OK. [ 0.100569] ACPI: Core revision 20080321 [ 0.120007] ENABLING IO-APIC IRQs [ 0.120007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.159653] CPU0: AMD Phenom(tm) II X4 960T Processor stepping 00 [ 0.160010] Booting processor 1/1 ip 6000 [ 0.168010] Initializing CPU#1 [ 0.168010] Calibrating delay using timer specific routine.. 6026.95 BogoMIPS (lpj=12053902) [ 0.168010] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.168010] CPU: L2 Cache: 512K (64 bytes/line) [ 0.168010] CPU 1(4) -> Core 1 [ 0.168010] Intel machine check architecture supported. [ 0.168010] Intel machine check reporting enabled on CPU#1. [ 0.248015] CPU1: AMD Phenom(tm) II X4 960T Processor stepping 00 [ 0.248015] Booting processor 2/2 ip 6000 [ 0.256016] Initializing CPU#2 [ 0.256016] Calibrating delay using timer specific routine.. 6026.94 BogoMIPS (lpj=12053892) [ 0.256016] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.256016] CPU: L2 Cache: 512K (64 bytes/line) [ 0.256016] CPU 2(4) -> Core 2 [ 0.256016] Intel machine check architecture supported. [ 0.256016] Intel machine check reporting enabled on CPU#2. [ 0.335453] CPU2: AMD Phenom(tm) II X4 960T Processor stepping 00 [ 0.335817] Booting processor 3/3 ip 6000 [ 0.344021] Initializing CPU#3 [ 0.344021] Calibrating delay using timer specific routine.. 6026.94 BogoMIPS (lpj=12053897) [ 0.344021] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.344021] CPU: L2 Cache: 512K (64 bytes/line) [ 0.344021] CPU 3(4) -> Core 3 [ 0.344021] Intel machine check architecture supported. [ 0.344021] Intel machine check reporting enabled on CPU#3. [ 0.423261] CPU3: AMD Phenom(tm) II X4 960T Processor stepping 00 [ 0.423583] Brought up 4 CPUs [ 0.423614] Total of 4 processors activated (24111.86 BogoMIPS). [ 0.423654] CPU0 attaching sched-domain: [ 0.423655] domain 0: span 0-3 [ 0.423657] groups: 0 1 2 3 [ 0.423660] CPU1 attaching sched-domain: [ 0.423661] domain 0: span 0-3 [ 0.423662] groups: 1 2 3 0 [ 0.423665] CPU2 attaching sched-domain: [ 0.423666] domain 0: span 0-3 [ 0.423667] groups: 2 3 0 1 [ 0.423669] CPU3 attaching sched-domain: [ 0.423670] domain 0: span 0-3 [ 0.423671] groups: 3 0 1 2 [ 0.424026] net_namespace: 660 bytes [ 0.424026] Booting paravirtualized kernel on bare hardware [ 0.424026] NET: Registered protocol family 16 [ 0.424026] ACPI: bus type pci registered [ 0.424026] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.424026] PCI: Not using MMCONFIG. [ 0.424026] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 0.424026] PCI: Using configuration type 1 for base access [ 0.424026] Setting up standard PCI resources [ 0.430612] ACPI: EC: Look up EC in DSDT [ 0.473516] ACPI: Interpreter enabled [ 0.473549] ACPI: (supports S0 S1 S3 S4 S5) [ 0.473722] ACPI: Using IOAPIC for interrupt routing [ 0.473807] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.478725] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.478757] PCI: Using MMCONFIG for extended config space [ 0.490615] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.490615] pci 0000:00:11.0: set SATA to AHCI mode [ 0.490615] PCI: Transparent bridge - 0000:00:14.4 [ 0.490615] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.490615] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.490615] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT] [ 0.490615] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] [ 0.490615] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.494616] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15) [ 0.494616] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15) [ 0.494616] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15) [ 0.494616] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) [ 0.494616] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.494616] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.494616] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15) [ 0.494616] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.498616] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 48, should be 43 [20080321] [ 0.498616] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.498616] pnp: PnP ACPI init [ 0.498616] ACPI: bus type pnp registered [ 0.502616] pnp: PnP ACPI: found 18 devices [ 0.502616] ACPI: ACPI bus type pnp unregistered [ 0.502616] PnPBIOS: Disabled by ACPI PNP [ 0.502616] PCI: Using ACPI for IRQ routing [ 0.512078] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.512247] hpet0: 4 32-bit timers, 14318180 Hz [ 0.516061] ACPI: RTC can wake from S4 [ 0.518794] Switched to high resolution mode on CPU 0 [ 0.520056] Switched to high resolution mode on CPU 1 [ 0.520836] Switched to high resolution mode on CPU 2 [ 0.521723] Switched to high resolution mode on CPU 3 [ 0.522788] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.522823] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.522866] system 00:0e: ioport range 0x4d0-0x4d1 has been reserved [ 0.522900] system 00:0e: ioport range 0x40b-0x40b has been reserved [ 0.522932] system 00:0e: ioport range 0x4d6-0x4d6 has been reserved [ 0.522965] system 00:0e: ioport range 0xc00-0xc01 has been reserved [ 0.522997] system 00:0e: ioport range 0xc14-0xc14 has been reserved [ 0.523028] system 00:0e: ioport range 0xc50-0xc51 has been reserved [ 0.523060] system 00:0e: ioport range 0xc52-0xc52 has been reserved [ 0.523095] system 00:0e: ioport range 0xc6c-0xc6c has been reserved [ 0.523528] system 00:0e: ioport range 0xc6f-0xc6f has been reserved [ 0.523562] system 00:0e: ioport range 0xcd0-0xcd1 has been reserved [ 0.523594] system 00:0e: ioport range 0xcd2-0xcd3 has been reserved [ 0.523626] system 00:0e: ioport range 0xcd4-0xcd5 has been reserved [ 0.523659] system 00:0e: ioport range 0xcd6-0xcd7 has been reserved [ 0.523692] system 00:0e: ioport range 0xcd8-0xcdf has been reserved [ 0.523724] system 00:0e: ioport range 0xb00-0xb3f has been reserved [ 0.523755] system 00:0e: ioport range 0x800-0x89f has been reserved [ 0.523787] system 00:0e: ioport range 0xb00-0xb0f has been reserved [ 0.523820] system 00:0e: ioport range 0xb20-0xb3f has been reserved [ 0.523854] system 00:0e: ioport range 0x900-0x90f has been reserved [ 0.523887] system 00:0e: ioport range 0x910-0x91f has been reserved [ 0.523919] system 00:0e: ioport range 0xfe00-0xfefe has been reserved [ 0.523953] system 00:0e: iomem range 0xffb80000-0xffbfffff has been reserved [ 0.523986] system 00:0e: iomem range 0xfec10000-0xfec1001f has been reserved [ 0.524018] system 00:0e: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.524051] system 00:0f: ioport range 0x230-0x23f has been reserved [ 0.524084] system 00:0f: ioport range 0x290-0x29f has been reserved [ 0.524117] system 00:0f: ioport range 0x300-0x30f has been reserved [ 0.524148] system 00:0f: ioport range 0xa30-0xa3f has been reserved [ 0.524183] system 00:10: iomem range 0xe0000000-0xefffffff has been reserved [ 0.524217] system 00:11: iomem range 0x0-0x9ffff could not be reserved [ 0.524249] system 00:11: iomem range 0xc0000-0xcffff could not be reserved [ 0.524281] system 00:11: iomem range 0xe0000-0xfffff could not be reserved [ 0.524314] system 00:11: iomem range 0x100000-0xcfefffff could not be reserved [ 0.524347] system 00:11: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.554325] PCI: Bridge: 0000:00:01.0 [ 0.554325] IO window: c000-cfff [ 0.554325] MEM window: 0xfe800000-0xfe9fffff [ 0.554325] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff [ 0.554325] PCI: Bridge: 0000:02:00.0 [ 0.554325] IO window: d000-dfff [ 0.554325] MEM window: 0xfea00000-0xfeafffff [ 0.554325] PREFETCH window: disabled. [ 0.554325] PCI: Bridge: 0000:00:04.0 [ 0.554361] IO window: d000-dfff [ 0.554392] MEM window: 0xfea00000-0xfeafffff [ 0.554423] PREFETCH window: disabled. [ 0.554454] PCI: Bridge: 0000:00:06.0 [ 0.554484] IO window: e000-efff [ 0.554515] MEM window: 0xfeb00000-0xfebfffff [ 0.554546] PREFETCH window: disabled. [ 0.554577] PCI: Bridge: 0000:00:14.4 [ 0.554607] IO window: disabled. [ 0.554639] MEM window: disabled. [ 0.554671] PREFETCH window: disabled. [ 0.557525] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.557586] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 0.557599] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 0.557605] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 0.557665] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 0.557763] NET: Registered protocol family 2 [ 0.573237] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.573521] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.573897] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.574082] TCP: Hash tables configured (established 131072 bind 65536) [ 0.574114] TCP reno registered [ 0.581247] NET: Registered protocol family 1 [ 0.581345] checking if image is initramfs... it is [ 0.847978] Freeing initrd memory: 6315k freed [ 0.847978] audit: initializing netlink socket (disabled) [ 0.847978] type=2000 audit(1354634069.840:1): initialized [ 0.847978] highmem bounce pool size: 64 pages [ 0.847978] Total HugeTLB memory allocated, 0 [ 0.847978] VFS: Disk quotas dquot_6.5.1 [ 0.847978] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.912058] msgmni has been set to 1718 [ 0.913563] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.913607] io scheduler noop registered [ 0.913637] io scheduler anticipatory registered [ 0.913668] io scheduler deadline registered [ 0.913733] io scheduler cfq registered (default) [ 1.076553] pci 0000:01:05.0: Boot video device [ 1.078998] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 1.078998] assign_interrupt_mode Found MSI capability [ 1.078998] Allocate Port Service[0000:00:04.0:pcie00] [ 1.078998] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 1.078998] assign_interrupt_mode Found MSI capability [ 1.078998] Allocate Port Service[0000:00:06.0:pcie00] [ 1.078998] isapnp: Scanning for PnP cards... [ 1.589505] isapnp: No Plug & Play device found [ 1.596065] hpet_resources: 0xfed00000 is busy [ 1.596065] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.596065] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.596065] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.596066] brd: module loaded [ 1.596066] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.596073] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.596073] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.596073] mice: PS/2 mouse device common for all mice [ 1.596074] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.596074] rtc0: alarms up to one month, y3k [ 1.596074] cpuidle: using governor ladder [ 1.596074] cpuidle: using governor menu [ 1.596074] No iBFT detected. [ 1.596074] TCP cubic registered [ 1.596074] NET: Registered protocol family 17 [ 1.596074] Using IPI No-Shortcut mode [ 1.604065] registered taskstats version 1 [ 1.604065] rtc_cmos 00:05: setting system clock to 2012-12-04 15:14:30 UTC (1354634070) [ 1.604065] Freeing unused kernel memory: 244k freed [ 1.636356] input: AT Translated Set 2 keyboard as /class/input/input0 [ 1.648347] usbcore: registered new interface driver usbfs [ 1.648347] usbcore: registered new interface driver hub [ 1.648347] usbcore: registered new device driver usb [ 1.648347] usbcore: registered new interface driver hiddev [ 1.648347] usbcore: registered new interface driver usbhid [ 1.648347] usbhid: v2.6:USB HID core driver [ 22.939057] RPC: Registered udp transport module. [ 22.939057] RPC: Registered tcp transport module. [ 23.043626] fuse init (API version 7.9) [ 23.091781] SCSI subsystem initialized [ 23.092202] Initializing USB Mass Storage driver... [ 23.092202] usbcore: registered new interface driver usb-storage [ 23.092202] USB Mass Storage support registered. [ 23.102671] usbcore: registered new interface driver usbserial [ 23.102671] usbserial: USB Serial support registered for generic [ 23.102671] usbcore: registered new interface driver usbserial_generic [ 23.102671] usbserial: USB Serial Driver core [ 23.112523] USB Universal Host Controller Interface driver v3.0 [ 23.120124] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 23.120124] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 23.120124] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 23.120124] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 23.120124] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe7fe000 [ 23.178035] usb usb1: configuration #1 chosen from 1 choice [ 23.178050] hub 1-0:1.0: USB hub found [ 23.178057] hub 1-0:1.0: 3 ports detected [ 23.289636] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 23.289636] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 23.289636] usb usb1: Product: OHCI Host Controller [ 23.289636] usb usb1: Manufacturer: Linux 2.6.26-2-686 ohci_hcd [ 23.289636] usb usb1: SerialNumber: 0000:00:12.0 [ 23.289636] ACPI: PCI Interrupt 0000:00:12.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 23.289636] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 23.289636] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 2 [ 23.289636] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe7fd000 [ 23.389664] usb usb2: configuration #1 chosen from 1 choice [ 23.389678] hub 2-0:1.0: USB hub found [ 23.389684] hub 2-0:1.0: 3 ports detected [ 23.497476] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 23.497478] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 23.497479] usb usb2: Product: OHCI Host Controller [ 23.497481] usb usb2: Manufacturer: Linux 2.6.26-2-686 ohci_hcd [ 23.497482] usb usb2: SerialNumber: 0000:00:12.1 [ 23.497497] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 23.497505] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 23.497525] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 3 [ 23.497538] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe7fc000 [ 23.558457] usb usb3: configuration #1 chosen from 1 choice [ 23.558471] hub 3-0:1.0: USB hub found [ 23.558477] hub 3-0:1.0: 3 ports detected [ 23.669745] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 23.669745] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 23.669745] usb usb3: Product: OHCI Host Controller [ 23.669745] usb usb3: Manufacturer: Linux 2.6.26-2-686 ohci_hcd [ 23.669745] usb usb3: SerialNumber: 0000:00:13.0 [ 23.669745] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 23.669745] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 23.669745] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 4 [ 23.669745] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe7fb000 [ 23.774092] usb usb4: configuration #1 chosen from 1 choice [ 23.774106] hub 4-0:1.0: USB hub found [ 23.774112] hub 4-0:1.0: 3 ports detected [ 23.882386] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 23.882386] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 23.882386] usb usb4: Product: OHCI Host Controller [ 23.882386] usb usb4: Manufacturer: Linux 2.6.26-2-686 ohci_hcd [ 23.882386] usb usb4: SerialNumber: 0000:00:13.1 [ 23.882386] ACPI: PCI Interrupt 0000:00:14.5[C] -> GSI 18 (level, low) -> IRQ 18 [ 23.882386] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 23.882386] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5 [ 23.882386] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe7fa000 [ 23.967285] usb usb5: configuration #1 chosen from 1 choice [ 23.967298] hub 5-0:1.0: USB hub found [ 23.967305] hub 5-0:1.0: 2 ports detected [ 24.010990] usb 3-2: new full speed USB device using ohci_hcd and address 2 [ 24.079339] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 24.079341] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 24.079343] usb usb5: Product: OHCI Host Controller [ 24.079344] usb usb5: Manufacturer: Linux 2.6.26-2-686 ohci_hcd [ 24.079346] usb usb5: SerialNumber: 0000:00:14.5 [ 24.159269] ACPI: PCI Interrupt 0000:00:12.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 24.159269] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 24.159269] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 6 [ 24.159269] ehci_hcd 0000:00:12.2: debug port 1 [ 24.159269] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe7ff800 [ 24.244082] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 24.244120] usb usb6: configuration #1 chosen from 1 choice [ 24.244135] hub 6-0:1.0: USB hub found [ 24.244139] hub 6-0:1.0: 6 ports detected [ 24.261414] usb 3-2: not running at top speed; connect to a high speed hub [ 24.266377] usb 3-2: configuration #1 chosen from 1 choice [ 24.266377] scsi0 : SCSI emulation for USB Mass Storage devices [ 24.273410] usb-storage: device found at 2 [ 24.273410] usb-storage: waiting for device to settle before scanning [ 24.266377] usb 3-2: New USB device found, idVendor=1307, idProduct=0165 [ 24.266377] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 24.266377] usb 3-2: Product: USB Flash Drive [ 24.266377] usb 3-2: Manufacturer: USB 2.0 [ 24.266377] usb 3-2: SerialNumber: c3f5c432d8769a [ 24.353931] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002 [ 24.353933] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 24.353935] usb usb6: Product: EHCI Host Controller [ 24.353936] usb usb6: Manufacturer: Linux 2.6.26-2-686 ehci_hcd [ 24.353938] usb usb6: SerialNumber: 0000:00:12.2 [ 24.353956] ACPI: PCI Interrupt 0000:00:13.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 24.353972] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 24.353983] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 7 [ 24.354006] ehci_hcd 0000:00:13.2: debug port 1 [ 24.354015] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe7ff400 [ 24.357355] usb 3-2: USB disconnect, address 2 [ 24.368392] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 24.368434] usb usb7: configuration #1 chosen from 1 choice [ 24.368450] hub 7-0:1.0: USB hub found [ 24.368454] hub 7-0:1.0: 6 ports detected [ 24.472477] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 24.472480] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 24.472481] usb usb7: Product: EHCI Host Controller [ 24.472482] usb usb7: Manufacturer: Linux 2.6.26-2-686 ehci_hcd [ 24.472484] usb usb7: SerialNumber: 0000:00:13.2 [ 24.526725] Failed initialization of WD-7000 SCSI card! [ 24.581695] DC390: clustering now enabled by default. If you get problems load [ 24.581695] with "disable_clustering=1" and report to maintainers [ 24.620710] sym53c416.c: Version 1.0.0-ac [ 24.630699] st: Version 20080224, fixed bufsize 32768, s/g segs 256 [ 24.630707] Driver 'st' needs updating - please use bus_type methods [ 24.640507] Driver 'sr' needs updating - please use bus_type methods [ 24.656508] Driver 'sd' needs updating - please use bus_type methods [ 24.684798] Loading iSCSI transport class v2.0-869. [ 24.739452] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<4>qla2xxx: Unknown symbol release_firmware [ 24.763437] qla2xxx: Unknown symbol request_firmware [ 24.764230] usb 7-2: new high speed USB device using ehci_hcd and address 2 [ 24.782746] ppa: Unknown symbol parport_register_device [ 24.782768] ppa: Unknown symbol parport_register_driver [ 24.782792] ppa: Unknown symbol parport_release [ 24.782825] ppa: Unknown symbol parport_claim [ 24.782867] ppa: Unknown symbol parport_unregister_device [ 24.782901] ppa: Unknown symbol parport_unregister_driver [ 24.814383] osst :I: Tape driver with OnStream support version 0.99.4 [ 24.814383] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 24.814383] Driver 'osst' needs updating - please use bus_type methods [ 24.827268] nsp32: loading... [ 24.836355] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 [ 24.845786] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 24.854276] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 24.884548] iscsi: registered transport (tcp) [ 24.919275] usb 7-2: configuration #1 chosen from 1 choice [ 24.920332] scsi1 : SCSI emulation for USB Mass Storage devices [ 24.921290] usb-storage: device found at 2 [ 24.921290] usb-storage: waiting for device to settle before scanning [ 24.921290] usb 7-2: New USB device found, idVendor=1307, idProduct=0165 [ 24.921292] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 24.921294] usb 7-2: Product: USB Flash Drive [ 24.921295] usb 7-2: Manufacturer: USB 2.0 [ 24.921296] usb 7-2: SerialNumber: c3f5c432d8769a [ 24.937124] imm: Unknown symbol parport_register_device [ 24.937147] imm: Unknown symbol parport_register_driver [ 24.937171] imm: Unknown symbol parport_release [ 24.937903] imm: Unknown symbol parport_claim [ 24.937951] imm: Unknown symbol parport_unregister_device [ 24.937991] imm: Unknown symbol parport_unregister_driver [ 24.949953] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 24.959775] scsi: Detection failed (no card) [ 25.094820] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 25.094820] Detecting Adaptec I2O RAID controllers... [ 25.235289] Adaptec aacraid driver 1.1-5[2461]-ms [ 25.245147] NCR53c406a: no available ports found [ 25.268965] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 25.278174] 3ware 9000 Storage Controller device driver for Linux v2.26.02.010. [ 25.294346] yenta_socket: Unknown symbol pccard_nonstatic_ops [ 25.319500] pcmcia: Unknown symbol release_firmware [ 25.319500] pcmcia: Unknown symbol request_firmware [ 25.385018] pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 25.397018] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker [ 25.425021] Intel(R) Gigabit Ethernet Network Driver - version 1.0.8-k2 [ 25.425021] Copyright (c) 2008 Intel Corporation. [ 25.448320] eepro100.c:v1.09j-t 9/29/99 Donald Becker [ 25.448320] eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others [ 25.460321] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 [ 25.460321] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 25.472693] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 25.472693] Copyright (c) 1999-2006 Intel Corporation. [ 25.506883] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 25.506883] e100: Copyright(c) 1999-2006 Intel Corporation [ 25.518883] bnx2x: Unknown symbol release_firmware [ 25.518883] bnx2x: Unknown symbol request_firmware [ 25.530251] bnx2: Unknown symbol release_firmware [ 25.530251] bnx2: Unknown symbol request_firmware [ 25.560066] 8139too Fast Ethernet driver 0.9.28 [ 25.574618] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 25.598072] I2O subsystem v1.325 [ 25.598072] i2o: max drivers = 8 [ 25.605189] I2O Block Device OSM v1.325 [ 25.611852] block-osm: registered device at major 80 [ 25.619777] Fusion MPT base driver 3.04.06 [ 25.619777] Copyright (c) 1999-2007 LSI Corporation [ 25.623777] Fusion MPT SPI Host driver 3.04.06 [ 25.641014] Fusion MPT SAS Host driver 3.04.06 [ 25.654667] Fusion MPT FC Host driver 3.04.06 [ 25.666165] Fusion MPT misc device (ioctl) driver 3.04.06 [ 25.666165] mptctl: Registered with Fusion MPT base driver [ 25.666165] mptctl: /dev/mptctl @ (major,minor=10,220) [ 25.694892] ieee1394: raw1394: /dev/raw1394 device initialized [ 25.712840] Uniform Multi-Platform E-IDE driver [ 25.712843] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 25.763257] pcmcia: Unknown symbol release_firmware [ 25.763263] pcmcia: Unknown symbol request_firmware [ 25.764301] ide_cs: Unknown symbol cs_error [ 25.764324] ide_cs: Unknown symbol pcmcia_disable_device [ 25.764347] ide_cs: Unknown symbol pcmcia_unregister_driver [ 25.764436] ide_cs: Unknown symbol pcmcia_get_configuration_info [ 25.764459] ide_cs: Unknown symbol pcmcia_request_io [ 25.764482] ide_cs: Unknown symbol pcmcia_request_configuration [ 25.764568] ide_cs: Unknown symbol pcmcia_register_driver [ 25.764639] ide_cs: Unknown symbol pcmcia_request_irq [ 25.788587] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 25.788595] Probing IDE interface ide0... [ 26.356731] Probing IDE interface ide1... [ 27.414550] hdd: TSSTcorp CDDVDW SH-222BB, ATAPI CD/DVD-ROM drive [ 27.470179] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 27.470189] ide1 at 0x170-0x177,0x376 on irq 15 [ 27.485342] ide-floppy driver 1.00 [ 28.117677] hdd: ATAPI 126X DVD-ROM DVD-R-RAM CD-R/RW drive, 1536kB Cache [ 28.117677] Uniform CD-ROM driver Revision: 3.20 [ 28.138665] usbcore: registered new interface driver usbkbd [ 28.138665] usbkbd: :USB HID Boot Protocol keyboard driver [ 28.165377] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found [ 28.202178] paride: Unknown symbol parport_register_device [ 28.202203] paride: Unknown symbol parport_release [ 28.202226] paride: Unknown symbol parport_claim [ 28.202251] paride: Unknown symbol parport_unregister_device [ 28.202283] paride: Unknown symbol parport_find_base [ 28.202306] paride: Unknown symbol parport_put_port [ 28.213403] loop: module loaded [ 31.093827] usb-storage: device scan complete [ 31.093827] scsi 1:0:0:0: Direct-Access USB 2.0 USB Flash Drive 0.00 PQ: 0 ANSI: 2 [ 31.362980] sd 1:0:0:0: [sda] 7897088 512-byte hardware sectors (4043 MB) [ 31.363853] sd 1:0:0:0: [sda] Write Protect is off [ 31.363855] sd 1:0:0:0: [sda] Mode Sense: 00 00 00 00 [ 31.363857] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 31.366599] sd 1:0:0:0: [sda] 7897088 512-byte hardware sectors (4043 MB) [ 31.367485] sd 1:0:0:0: [sda] Write Protect is off [ 31.367487] sd 1:0:0:0: [sda] Mode Sense: 00 00 00 00 [ 31.367488] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 31.367491] sda: sda1 [ 31.486024] sd 1:0:0:0: [sda] Attached SCSI removable disk [ 31.486024] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 31.866035] floppy0: no floppy controllers found [ 31.877304] HP CISS Driver (v 3.6.20) [ 31.889269] No dock devices found. [ 31.897268] libata version 3.00 loaded. [ 31.980096] ahci 0000:00:11.0: version 3.0 [ 31.980115] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 32.987129] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 32.987132] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 32.990045] scsi4 : ahci [ 32.990045] scsi5 : ahci [ 32.990045] scsi6 : ahci [ 32.990045] scsi7 : ahci [ 32.990045] ata1: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 22 [ 32.990045] ata2: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 22 [ 32.990045] ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 22 [ 32.990045] ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 22 [ 33.846876] ata1: SATA link down (SStatus 0 SControl 300) [ 34.195407] ata2: SATA link down (SStatus 0 SControl 300) [ 34.699366] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 34.699345] ata3.00: ATA-8: Hitachi HDS721050DLE630, MS1OA650, max UDMA/133 [ 34.699345] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 34.699345] ata3.00: configured for UDMA/133 [ 35.239995] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 35.243949] ata4.00: ATA-8: Hitachi HDS721050DLE630, MS1OA650, max UDMA/133 [ 35.243949] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 35.243949] ata4.00: configured for UDMA/133 [ 35.259001] scsi 6:0:0:0: Direct-Access ATA Hitachi HDS72105 MS1O PQ: 0 ANSI: 5 [ 35.259251] sd 6:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 35.259260] sd 6:0:0:0: [sdb] Write Protect is off [ 35.259261] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 35.259275] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.259303] sd 6:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 35.259315] sd 6:0:0:0: [sdb] Write Protect is off [ 35.259323] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 35.259337] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.259339] sdb: sdb1 sdb2 sdb3 [ 35.264832] sd 6:0:0:0: [sdb] Attached SCSI disk [ 35.264853] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 35.267468] scsi 7:0:0:0: Direct-Access ATA Hitachi HDS72105 MS1O PQ: 0 ANSI: 5 [ 35.267709] sd 7:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) [ 35.267719] sd 7:0:0:0: [sdc] Write Protect is off [ 35.267720] sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 35.267735] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.267765] sd 7:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) [ 35.267773] sd 7:0:0:0: [sdc] Write Protect is off [ 35.267775] sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 35.267790] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.267791] sdc: sdc1 sdc2 sdc3 [ 35.271969] sd 7:0:0:0: [sdc] Attached SCSI disk [ 35.271969] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 48.095028] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 48.095028] ISO 9660 Extensions: RRIP_1991A [ 48.215163] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 48.252986] ISO 9660 Extensions: RRIP_1991A [ 62.495806] dahdi: Unknown symbol crc_ccitt_table [ 62.496391] dahdi_voicebus: Unknown symbol dahdi_register [ 62.497016] wctdm24xxp: Unknown symbol voicebus_transmit [ 62.497042] wctdm24xxp: Unknown symbol voicebus_pci_dev_to_context [ 62.497079] wctdm24xxp: Unknown symbol vpmadt032_echocan_create [ 62.497114] wctdm24xxp: Unknown symbol voicebus_stop [ 62.497157] wctdm24xxp: Unknown symbol gpakPingDsp [ 62.497187] wctdm24xxp: Unknown symbol dahdi_transmit [ 62.497213] wctdm24xxp: Unknown symbol dahdi_register [ 62.497234] wctdm24xxp: Unknown symbol voicebus_start [ 62.497234] wctdm24xxp: Unknown symbol voicebus_init [ 62.497234] wctdm24xxp: Unknown symbol dahdi_qevent_lock [ 62.497234] wctdm24xxp: Unknown symbol dahdi_hooksig [ 62.497234] wctdm24xxp: Unknown symbol vpmadt032_get_default_parameters [ 62.497234] wctdm24xxp: Unknown symbol voicebus_release [ 62.497234] wctdm24xxp: Unknown symbol vpmadt032_init [ 62.497234] wctdm24xxp: Unknown symbol dahdi_receive [ 62.497234] wctdm24xxp: Unknown symbol gpakAlgControl [ 62.497234] wctdm24xxp: Unknown symbol dahdi_unregister [ 62.497234] wctdm24xxp: Unknown symbol voicebus_set_minlatency [ 62.497234] wctdm24xxp: Unknown symbol vpmadt032_echocan_free [ 62.500103] wctdm24xxp: Unknown symbol gpakConfigureChannel [ 62.500103] wctdm24xxp: Unknown symbol voicebus_lock_latency [ 62.500103] wctdm24xxp: Unknown symbol dahdi_alarm_channel [ 62.500103] wctdm24xxp: Unknown symbol vpmadt032_alloc [ 62.500103] wctdm24xxp: Unknown symbol dahdi_ec_chunk [ 62.500103] wctdm24xxp: Unknown symbol voicebus_unlock_latency [ 62.500103] wctdm24xxp: Unknown symbol voicebus_get_pci_dev [ 62.500103] wctdm24xxp: Unknown symbol vpmadt032_free [ 62.500103] wctdm24xxp: Unknown symbol gpakConfigurePorts [ 62.505156] dahdi: Unknown symbol crc_ccitt_table [ 62.505156] dahdi_voicebus: Unknown symbol dahdi_register [ 62.509068] dahdi: Unknown symbol crc_ccitt_table [ 62.516087] dahdi: Unknown symbol crc_ccitt_table [ 62.516087] dahdi_echocan_oslec: Unknown symbol dahdi_register_echocan_factory [ 62.516087] dahdi_echocan_oslec: Unknown symbol dahdi_unregister_echocan_factory [ 62.572702] async_tx: api initialized (async) [ 62.580488] xor: automatically using best checksumming function: pIII_sse [ 62.596477] pIII_sse : 13426.000 MB/sec [ 62.596479] xor: using function: pIII_sse (13426.000 MB/sec) [ 62.624891] NET: Registered protocol family 10 [ 62.624891] lo: Disabled Privacy Extensions [ 62.687906] JFS: nTxBlock = 8192, nTxLock = 65536 [ 62.752611] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 62.769867] OCFS2 Node Manager 1.5.0 [ 62.784404] OCFS2 DLM 1.5.0 [ 62.792330] ocfs2: Unknown symbol ocfs2_dlm_lock_status [ 62.792330] ocfs2: Unknown symbol ocfs2_cluster_connect [ 62.792330] ocfs2: Unknown symbol ocfs2_dlm_dump_lksb [ 62.792330] ocfs2: Unknown symbol ocfs2_cluster_this_node [ 62.792330] ocfs2: Unknown symbol ocfs2_dlm_lock [ 62.792330] ocfs2: Unknown symbol ocfs2_dlm_unlock [ 62.792330] ocfs2: Unknown symbol ocfs2_stack_glue_set_locking_protocol [ 62.792330] ocfs2: Unknown symbol ocfs2_dlm_lvb [ 62.792330] ocfs2: Unknown symbol ocfs2_cluster_disconnect [ 62.792330] ocfs2: Unknown symbol ocfs2_cluster_hangup [ 62.804319] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled [ 62.804319] SGI XFS Quota Management subsystem [ 62.919682] md: raid1 personality registered for level 1 [ 62.934999] md: raid10 personality registered for level 10 [ 62.949923] device-mapper: uevent: version 1.0.3 [ 62.949961] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 62.953469] device-mapper: multipath: version 1.0.5 loaded [ 62.953924] device-mapper: multipath rdac: rdac: version 0.4 loaded [ 62.966225] md: linear personality registered for level -1 [ 63.007553] device-mapper: multipath emc: version 0.0.3 loaded [ 63.053496] md: multipath personality registered for level -4 [ 63.066945] md: raid0 personality registered for level 0 [ 63.096656] device-mapper: multipath hp-sw: version 1.0.0 loaded [ 63.186797] raid6: int32x1 1109 MB/s [ 63.256983] raid6: int32x2 1309 MB/s [ 63.331667] raid6: int32x4 830 MB/s [ 63.399653] raid6: int32x8 918 MB/s [ 63.467926] raid6: mmxx1 2268 MB/s [ 63.535976] raid6: mmxx2 4005 MB/s [ 63.603807] raid6: sse1x1 2398 MB/s [ 63.671970] raid6: sse1x2 4273 MB/s [ 63.739793] raid6: sse2x1 4634 MB/s [ 63.807637] raid6: sse2x2 7994 MB/s [ 63.807639] raid6: using algorithm sse2x2 (7994 MB/s) [ 63.807640] md: raid6 personality registered for level 6 [ 63.807642] md: raid5 personality registered for level 5 [ 63.807643] md: raid4 personality registered for level 4 [ 64.299731] device-mapper: multipath round-robin: version 1.0.0 loaded [ 64.337728] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 64.337728] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 64.370735] parport_pc 00:08: reported by Plug and Play ACPI [ 64.370735] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 64.576175] ppa: Version 2.07 (for Linux 2.4.x) [ 64.620867] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 64.620870] Detecting Adaptec I2O RAID controllers... [ 64.696406] NCR53c406a: no available ports found [ 64.711836] imm: Version 2.05 (for Linux 2.4.0) [ 64.965975] scsi: Detection failed (no card) [ 65.069682] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card! [ 65.205146] sym53c416.c: Version 1.0.0-ac [ 65.260796] qla2xxx: Unknown symbol release_firmware [ 65.260952] qla2xxx: Unknown symbol request_firmware [ 65.331749] yenta_socket: Unknown symbol pccard_nonstatic_ops [ 65.348236] pcmcia: Unknown symbol release_firmware [ 65.348236] pcmcia: Unknown symbol request_firmware [ 65.389368] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 65.389368] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 65.473157] atl1c 0000:04:00.0: version 1.0.0.1-NAPI [ 65.511993] bnx2x: Unknown symbol release_firmware [ 65.512111] bnx2x: Unknown symbol request_firmware [ 65.524956] bnx2: Unknown symbol release_firmware [ 65.524956] bnx2: Unknown symbol request_firmware [ 65.776437] input: PC Speaker as /class/input/input1 [ 66.403275] input: PS/2 Generic Mouse as /class/input/input2 [ 66.632587] ATIIXP: IDE controller (0x1002:0x439c rev 0x00) at PCI slot 0000:00:14.1 [ 66.632587] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 66.632587] PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:14.1 [ 66.632587] ATIIXP: can't reserve resources [ 66.632587] ATIIXP_IDE: probe of 0000:00:14.1 failed with error -16 [ 66.662734] pcmcia: Unknown symbol release_firmware [ 66.662734] pcmcia: Unknown symbol request_firmware [ 66.664388] ide_cs: Unknown symbol cs_error [ 66.664388] ide_cs: Unknown symbol pcmcia_disable_device [ 66.664388] ide_cs: Unknown symbol pcmcia_unregister_driver [ 66.664448] ide_cs: Unknown symbol pcmcia_get_configuration_info [ 66.664476] ide_cs: Unknown symbol pcmcia_request_io [ 66.664505] ide_cs: Unknown symbol pcmcia_request_configuration [ 66.664621] ide_cs: Unknown symbol pcmcia_register_driver [ 66.664715] ide_cs: Unknown symbol pcmcia_request_irq [ 69.999454] floppy0: no floppy controllers found [ 70.543259] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 70.543259] ACPI: ACPI0007:00 is registered as cooling_device0 [ 70.543259] ACPI: Processor [P001] (supports 8 throttling states) [ 70.543259] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 70.543259] ACPI: ACPI0007:01 is registered as cooling_device1 [ 70.543259] ACPI: CPU2 (power states: C1[C1] C2[C2]) [ 70.543259] ACPI: ACPI0007:02 is registered as cooling_device2 [ 70.543259] ACPI: CPU3 (power states: C1[C1] C2[C2]) [ 70.543259] ACPI: ACPI0007:03 is registered as cooling_device3 [ 70.554149] ACPI: WMI: Mapper loaded [ 70.566835] input: Power Button (FF) as /class/input/input3 [ 70.598551] ACPI: Power Button (FF) [PWRF] [ 70.598603] input: Power Button (CM) as /class/input/input4 [ 70.638040] ACPI: Power Button (CM) [PWRB] [ 81.595554] md: md2 stopped. [ 81.595554] mdadm: sending ioctl 1261 to a partition! [ 81.595554] mdadm: sending ioctl 1261 to a partition! [ 81.624840] mdadm: sending ioctl 1261 to a partition! [ 81.624840] mdadm: sending ioctl 1261 to a partition! [ 81.625360] mdadm: sending ioctl 1261 to a partition! [ 81.625360] mdadm: sending ioctl 1261 to a partition! [ 81.652450] mdadm: sending ioctl 1261 to a partition! [ 81.652450] mdadm: sending ioctl 1261 to a partition! [ 81.652510] mdadm: sending ioctl 1261 to a partition! [ 81.652510] mdadm: sending ioctl 1261 to a partition! [ 81.944519] md: md0 stopped. [ 81.974158] md: md1 stopped. 15:15 ------------- 15:15 /proc/swaps: 15:15 ------------- Filename Type Size Used Priority 15:15 ------------- 15:15 /proc/filesystems: 15:15 ------------- nodev sysfs nodev rootfs nodev bdev nodev proc nodev cgroup nodev cpuset nodev debugfs nodev securityfs nodev sockfs nodev pipefs nodev anon_inodefs nodev tmpfs nodev inotifyfs nodev devpts nodev ramfs nodev hugetlbfs nodev mqueue nodev usbfs nodev rpc_pipefs vfat nodev nfs nodev nfs4 iso9660 nodev fuse fuseblk nodev fusectl jfs msdos minix reiserfs ext2 nodev nfsd nodev configfs xfs ext3 15:15 ------------- 15:15 /proc/partitions: 15:15 ------------- major minor #blocks name 8 0 3948544 sda 8 1 3948512 sda1 8 16 488386584 sdb 8 17 987966 sdb1 8 18 19543072 sdb2 8 19 467852962 sdb3 8 32 488386584 sdc 8 33 987966 sdc1 8 34 19543072 sdc2 8 35 467852962 sdc3 15:15 ------------- 15:15 fdisk result: 15:15 ------------- Disk /dev/sda: 4043 MB, 4043309056 bytes 255 heads, 63 sectors/track, 491 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x04dd5721 Device Boot Start End Blocks Id System /dev/sda1 * 1 492 3948512+ b W95 FAT32 Partition 1 has different physical/logical endings: phys=(490, 254, 63) logical=(491, 145, 38) Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x365b845d Device Boot Start End Blocks Id System /dev/sdb1 * 1 123 987966 fd Linux raid autodetect /dev/sdb2 124 2556 19543072+ fd Linux raid autodetect /dev/sdb3 2557 60801 467852962+ fd Linux raid autodetect Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xac396ec8 Device Boot Start End Blocks Id System /dev/sdc1 * 1 123 987966 fd Linux raid autodetect /dev/sdc2 124 2556 19543072+ fd Linux raid autodetect /dev/sdc3 2557 60801 467852962+ fd Linux raid autodetect 15:15 ------------- 15:15 /tmp/mondo-restore.cfg result: 15:15 ------------- media-size 0 files-in-filelist 42410 last-filelist-number 55 internal-tape-block-size 32768 use-lzo yes use-gzip no use-star no use-comp yes datestamp Mon Dec 3 16:42:14 COT 2012 total-slices 1 iso-dev /dev/md2 iso-mnt / iso-prefix mondorescue isodir /var/cache/rapid/backup/mondo bootloader.device /dev/sda bootloader.name GRUB backup-media-type cdr differential 0 15:15 backup-media-type is specified in config file - great. 15:15 Calling post-init 15:15 Executing preliminary script Here is my /tmp/mountlist.txt /dev/md2 / ext3 467869027 /dev/md0 /boot ext3 979933 /dev/md1 swap swap 19534968 /dev/sda3 raid raid 467869027 /dev/sdb3 raid raid 467869027 /dev/sda2 raid raid 19535040 /dev/sdb2 raid raid 19535040 /dev/sda1 raid raid 979933 /dev/sdb1 raid raid 979933 15:15 mondorestore found; cool... 15:15 mount-me found 15:15 unmount-me found 15:15 mondorestore found 15:15 -------------------NUKE MODE------------------- [TH=10323] libmondo-tools.c->reset_bkpinfo#772: Hi root is mounted at rootfs No, Schlomo, that doesn't mean rootfs is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [TH=10323] libmondo-devices.c->am_I_in_disaster_recovery_mode#166: Is this a ramdisk? result = 1 [TH=10323] libmondo-devices.c->sensibly_set_tmpdir_and_scratchdir#2976: bkpinfo->tmpdir is being set to //mondo.tmp.yoMCLa [TH=10323] libmondo-devices.c->sensibly_set_tmpdir_and_scratchdir#2987: bkpinfo->scratchdir is being set to //mondo.scratch.17767 running: mkdir -p /mnt/cdrom > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) root is mounted at rootfs No, Schlomo, that doesn't mean rootfs is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [TH=10323] libmondo-devices.c->am_I_in_disaster_recovery_mode#166: Is this a ramdisk? result = 1 running: mount / -o remount,rw > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-tools.c->get_kernel_version#254: g_kernel_version = 2.626000 [Main] mondorestore.c->main#2893: FYI - g_mountlist_fname = /tmp/mountlist.txt running: cp -f /tmp/mountlist.txt /tmp/mountlist.txt.orig > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: umount -d /mnt/cdrom > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: rm -Rf /tmp/tmpfs/mondo.tmp.* > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) -------------- Mondo Restore v3.0.1-r2957 ------------- DON'T PANIC! Mondorestore logs almost everything, so please don't break out in a cold sweat just because you see a few error messages in the log. Read them; analyze them; see if they are significant; above all, verify your backups! Please attach a compressed copy of this log to any e-mail you send to the Mondo mailing list when you are seeking technical support. Without it, we can't help you. - DevTeam ------------------------------------------------------------ BTW, despite (or perhaps because of) the wealth of messages, some users are inclined to stop reading this log. If Mondo stopped for some reason, chances are it's detailed here. More than likely there's a message at the very end of this log that will tell you what is wrong. Please read it! ------------------------------------------------------------ [Main] mondorestore.c->main#2928: I am in disaster recovery mode [Main] mondorestore.c->main#2933: what time is it [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found afio at /bin/afio running: which mkfs.vfat > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- /sbin/mkfs.vfat --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-cli.c->handle_incoming_parameters#100: Switches:- [Main] libmondo-cli.c->handle_incoming_parameters#104: -Z nuke [Main] mondorestore.c->main#3108: I must be in disaster recovery mode. [Main] mondorestore.c->main#3109: FYI, MOUNTLIST_FNAME = /tmp/mountlist.txt [Main] mondorestore.c->main#3111: About to call load_mountlist and load_raidtab [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#765: Backup medium is CD-R[W] [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#804: Internal tape block size has been custom-set to 32768 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#843: differential var = '0' [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#847: This is a regular (full) backup [Main] libmondo-mountlist.c->load_mountlist#830: Loading mountlist... [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/md2 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/md2 / ext3 467869027 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/md0 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/md0 /boot ext3 979933 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/md1 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/md1 swap swap 19534968 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/sda3 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/sda3 raid raid 467869027 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/sdb3 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/sdb3 raid raid 467869027 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/sda2 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/sda2 raid raid 19535040 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/sdb2 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/sdb2 raid raid 19535040 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/sda1 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/sda1 raid raid 979933 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/sdb1 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/sdb1 raid raid 979933 [Main] libmondo-mountlist.c->load_mountlist#913: Mountlist loaded successfully. [Main] libmondo-mountlist.c->load_mountlist#914: 9 entries in mountlist [Main] libmondo-raid.c->load_raidtab_into_raidlist#628: Loading raidtab... [Main] libmondo-raid.c->load_raidtab_into_raidlist#631: Looking for raid record #0 [Main] libmondo-raid.c->load_raidtab_into_raidlist#647: Record #0 (/dev/md2) found [Main] libmondo-raid.c->load_raidtab_into_raidlist#631: Looking for raid record #1 [Main] libmondo-raid.c->load_raidtab_into_raidlist#647: Record #1 (/dev/md1) found [Main] libmondo-raid.c->load_raidtab_into_raidlist#631: Looking for raid record #2 [Main] libmondo-raid.c->load_raidtab_into_raidlist#647: Record #2 (/dev/md0) found [Main] libmondo-raid.c->load_raidtab_into_raidlist#658: Raidtab loaded successfully. [Main] libmondo-raid.c->load_raidtab_into_raidlist#659: 3 RAID devices in raidtab [Main] mondorestore.c->main#3116: Returned from calling load_mountlist and load_raidtab successfully [Main] mondorestore.c->main#3151: Send in the clowns. [Main] mondorestore.c->main#3155: nuking [Main] mondorestore.c->nuke_mode#778: nuke_mode --- starting [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2151: gcffa --- starting I'm thinking... running: mkdir -p //mondo.tmp.yoMCLa/mount.bootdisk > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2167: mountpt = //mondo.tmp.yoMCLa/mount.bootdisk; cfg_file=//mondo.tmp.yoMCLa/tmp/mondo-restore.cfg [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2170: gcffa --- we don't have cfg file yet. [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2174: gcffa --- calling mount_media now :) running: mount | grep -F /mnt/cdrom > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 [Main] libmondo-devices.c->mount_media#1451: (mount_media) --- command = mount /dev/cdrom -t iso9660 -o ro /mnt/cdrom running: mount /dev/cdrom -t iso9660 -o ro /mnt/cdrom > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-devices.c->mount_media#1466: Mounted media drive OK [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2177: gcffa --- managed to mount CD; so, no need for Plan B [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /mnt/cdrom mounted? [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2232: gcffa --- Plan B, a.k.a. untarring some file from all.tar.gz running: tar -zxvf /mnt/cdrom/images/all.tar.gz ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- ./tmp/filelist.full.gz ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt tar: ./tmp/i-want-my-lvm: not found in archive --------------------------------end of output------------------------------ ...ran with res=256 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2248: gcffa --- great! We've got the config file [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2253: cp -f /mondo.tmp.yoMCLa/tmp/mondo-restore.cfg //mondo.tmp.yoMCLa/tmp/mondo-restore.cfg running: cp -f /mondo.tmp.yoMCLa/tmp/mondo-restore.cfg //mondo.tmp.yoMCLa/tmp/mondo-restore.cfg > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- cp: '/mondo.tmp.yoMCLa/tmp/mondo-restore.cfg' and '//mondo.tmp.yoMCLa/tmp/mondo-restore.cfg' are the same file --------------------------------end of output------------------------------ ...ran with res=256 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2258: ... but an error occurred when I tried to move it to //mondo.tmp.yoMCLa/tmp/mondo-restore.cfg [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2265: cp -f /mondo.tmp.yoMCLa/tmp/mountlist.txt //mondo.tmp.yoMCLa/tmp/mountlist.txt running: umount -d /mnt/cdrom > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) Recovered mondo-restore.cfg running: cp -f //mondo.tmp.yoMCLa/tmp/mondo-restore.cfg /tmp/mondo-restore.cfg > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: cp -f etc/raidtab /etc/ > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- cp: can't stat 'etc/raidtab': No such file or directory --------------------------------end of output------------------------------ ...ran with res=256 running: cp -f tmp/i-want-my-lvm /tmp/ > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- cp: can't stat 'tmp/i-want-my-lvm': No such file or directory --------------------------------end of output------------------------------ ...ran with res=256 [Main] libmondo-mountlist.c->load_mountlist#830: Loading mountlist... [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/md2 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/md2 / ext3 467869027 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/md0 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/md0 /boot ext3 979933 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/md1 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/md1 swap swap 19534968 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/sda3 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/sda3 raid raid 467869027 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/sdb3 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/sdb3 raid raid 467869027 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/sda2 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/sda2 raid raid 19535040 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/sdb2 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/sdb2 raid raid 19535040 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/sda1 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/sda1 raid raid 979933 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/sdb1 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/sdb1 raid raid 979933 [Main] libmondo-mountlist.c->load_mountlist#913: Mountlist loaded successfully. [Main] libmondo-mountlist.c->load_mountlist#914: 9 entries in mountlist [Main] mondo-prep.c->resize_mountlist_proportionately_to_suit_new_drives#2624: Resizing mountlist [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] mondo-prep.c->resize_mountlist_proportionately_to_suit_new_drives#2626: Back from MLoDiM [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 3856 --> 3856 Expanding entries to suit drive /dev/sda (3856 MB) [Main] mondo-prep.c->create_mountlist_for_drive#2656: Creating list of partitions for drive /dev/sda Disk /dev/sda was 476937 MB; is now 3856 MB; Proportionally resizing partitions (factor ~= 0.00808) Changing /dev/sda3 from 467869027 KB to 3782682 KB Changing /dev/sda2 from 19535040 KB to 157939 KB Changing /dev/sda1 from 979933 KB to 7922 KB Last partition size calculated would be under-allocated, increasing /dev/sda1 from 7922 KB to 7923 KB. final_size = 3856 MB [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdb --> -1 or 476940 --> 476940 Expanding entries to suit drive /dev/sdb (476940 MB) [Main] mondo-prep.c->create_mountlist_for_drive#2656: Creating list of partitions for drive /dev/sdb Disk /dev/sdb was 476937 MB; is now 476940 MB; Proportionally resizing partitions (factor ~= 1.00001) Changing /dev/sdb3 from 467869027 KB to 467871481 KB Changing /dev/sdb2 from 19535040 KB to 19535142 KB Changing /dev/sdb1 from 979933 KB to 979938 KB Last partition size calculated would be over-allocated, reducing /dev/sdb1 from 979938 KB to 979937 KB. final_size = 476940 MB Mountlist adjusted to suit current hard drive(s) [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 3856 --> 3856 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sda is 3856 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda1 on /dev/sda #7 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#476: /dev/sda1 is tiny! [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda2 on /dev/sda #5 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda3 on /dev/sda #3 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: /dev/sda1 is tiny! [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdb --> -1 or 476940 --> 476940 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sdb is 476940 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb1 on /dev/sdb #8 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb2 on /dev/sdb #6 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb3 on /dev/sdb #4 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#517: 2 MB unallocated on /dev/sdb. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#527: Fine, no error in evaluate_drive_within_mountlist [Main] mondorestore.c->interactive_mode#449: interactive_mode --- starting (great, assertions OK) [Main] mondorestore.c->interactive_mode#458: interactive_mode --- assertions OK [Main] mondorestore.c->interactive_mode#468: About to load config file [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2151: gcffa --- starting I'm thinking... running: mkdir -p //mondo.tmp.yoMCLa/mount.bootdisk > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2167: mountpt = //mondo.tmp.yoMCLa/mount.bootdisk; cfg_file=//mondo.tmp.yoMCLa/tmp/mondo-restore.cfg [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2170: gcffa --- we don't have cfg file yet. [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2174: gcffa --- calling mount_media now :) running: mount | grep -F /mnt/cdrom > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 [Main] libmondo-devices.c->mount_media#1451: (mount_media) --- command = mount /dev/cdrom -t iso9660 -o ro /mnt/cdrom running: mount /dev/cdrom -t iso9660 -o ro /mnt/cdrom > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-devices.c->mount_media#1466: Mounted media drive OK [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2177: gcffa --- managed to mount CD; so, no need for Plan B [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /mnt/cdrom mounted? [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2232: gcffa --- Plan B, a.k.a. untarring some file from all.tar.gz running: tar -zxvf /mnt/cdrom/images/all.tar.gz ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- ./tmp/filelist.full.gz ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt tar: ./tmp/i-want-my-lvm: not found in archive --------------------------------end of output------------------------------ ...ran with res=256 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2248: gcffa --- great! We've got the config file [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2253: cp -f /mondo.tmp.yoMCLa/tmp/mondo-restore.cfg //mondo.tmp.yoMCLa/tmp/mondo-restore.cfg running: cp -f /mondo.tmp.yoMCLa/tmp/mondo-restore.cfg //mondo.tmp.yoMCLa/tmp/mondo-restore.cfg > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- cp: '/mondo.tmp.yoMCLa/tmp/mondo-restore.cfg' and '//mondo.tmp.yoMCLa/tmp/mondo-restore.cfg' are the same file --------------------------------end of output------------------------------ ...ran with res=256 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2258: ... but an error occurred when I tried to move it to //mondo.tmp.yoMCLa/tmp/mondo-restore.cfg [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2265: cp -f /mondo.tmp.yoMCLa/tmp/mountlist.txt //mondo.tmp.yoMCLa/tmp/mountlist.txt running: umount -d /mnt/cdrom > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) Recovered mondo-restore.cfg running: cp -f //mondo.tmp.yoMCLa/tmp/mondo-restore.cfg /tmp/mondo-restore.cfg > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: cp -f etc/raidtab /etc/ > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- cp: can't stat 'etc/raidtab': No such file or directory --------------------------------end of output------------------------------ ...ran with res=256 running: cp -f tmp/i-want-my-lvm /tmp/ > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- cp: can't stat 'tmp/i-want-my-lvm': No such file or directory --------------------------------end of output------------------------------ ...ran with res=256 root is mounted at rootfs No, Schlomo, that doesn't mean rootfs is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [Main] libmondo-devices.c->am_I_in_disaster_recovery_mode#166: Is this a ramdisk? result = 1 [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/cdrom mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cdrom " > /dev/null 2> /dev/null' [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#677: NB: CDROM device not mounted, mounting... running: mount /dev/cdrom /mnt/cdrom > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- mount: block device /dev/hdd is write-protected, mounting read-only --------------------------------end of output------------------------------ ...ran just fine. :-) running: umount -d /mnt/cdrom > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#685: Re-jigging configuration AGAIN. CD-R, not ISO. [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#765: Backup medium is CD-R[W] [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#804: Internal tape block size has been custom-set to 32768 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#843: differential var = '0' [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#847: This is a regular (full) backup [Main] mondorestore.c->interactive_mode#471: Done loading config file; resizing ML [Main] mondo-prep.c->resize_mountlist_proportionately_to_suit_new_drives#2624: Resizing mountlist [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] mondo-prep.c->resize_mountlist_proportionately_to_suit_new_drives#2626: Back from MLoDiM [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 3856 --> 3856 Expanding entries to suit drive /dev/sda (3856 MB) [Main] mondo-prep.c->create_mountlist_for_drive#2656: Creating list of partitions for drive /dev/sda Disk /dev/sda was 3856 MB; is now 3856 MB; Proportionally resizing partitions (factor ~= 1.00000) Changing /dev/sda3 from 3782682 KB to 3782682 KB Changing /dev/sda2 from 157939 KB to 157939 KB Changing /dev/sda1 from 7923 KB to 7923 KB final_size = 3856 MB [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdb --> -1 or 476940 --> 476940 Expanding entries to suit drive /dev/sdb (476940 MB) [Main] mondo-prep.c->create_mountlist_for_drive#2656: Creating list of partitions for drive /dev/sdb Disk /dev/sdb was 476940 MB; is now 476940 MB; Proportionally resizing partitions (factor ~= 1.00000) Changing /dev/sdb3 from 467871481 KB to 467871481 KB Changing /dev/sdb2 from 19535142 KB to 19535142 KB Changing /dev/sdb1 from 979937 KB to 979937 KB final_size = 476940 MB Mountlist adjusted to suit current hard drive(s) [Main] mondorestore.c->interactive_mode#488: About to edit mountlist [Main] mondo-rstr-newt.c->edit_mountlist#2090: entering eml [Main] mondo-rstr-newt.c->edit_mountlist#2096: I'm in GUI mode, so I shall edit mountlist using edit_mountlist() [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 3856 --> 3856 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sda is 3856 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda1 on /dev/sda #7 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#476: /dev/sda1 is tiny! [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda2 on /dev/sda #5 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda3 on /dev/sda #3 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: /dev/sda1 is tiny! [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdb --> -1 or 476940 --> 476940 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sdb is 476940 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb1 on /dev/sdb #8 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb2 on /dev/sdb #6 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb3 on /dev/sdb #4 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#517: 2 MB unallocated on /dev/sdb. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#527: Fine, no error in evaluate_drive_within_mountlist [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 3856 --> 3856 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sda is 3856 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda1 on /dev/sda #7 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#476: /dev/sda1 is tiny! [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda2 on /dev/sda #5 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda3 on /dev/sda #3 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: /dev/sda1 is tiny! [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdb --> -1 or 476940 --> 476940 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sdb is 476940 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb1 on /dev/sdb #8 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb2 on /dev/sdb #6 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb3 on /dev/sdb #4 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#517: 2 MB unallocated on /dev/sdb. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#527: Fine, no error in evaluate_drive_within_mountlist [Main] mondo-rstr-newt.c->calculate_raid_device_size#450: I have calculated /dev/md0's real size to be 7923 [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 3856 --> 3856 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sda is 3856 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda1 on /dev/sda #7 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#476: /dev/sda1 is tiny! [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda2 on /dev/sda #5 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda3 on /dev/sda #3 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: /dev/sda1 is tiny! [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdb --> -1 or 476940 --> 476940 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sdb is 476940 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb1 on /dev/sdb #8 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb2 on /dev/sdb #6 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb3 on /dev/sdb #4 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#517: 2 MB unallocated on /dev/sdb. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#527: Fine, no error in evaluate_drive_within_mountlist [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 3856 --> 3856 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sda is 3856 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda1 on /dev/sda #7 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#476: /dev/sda1 is tiny! [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda2 on /dev/sda #5 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda3 on /dev/sda #3 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: /dev/sda1 is tiny! [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdb --> -1 or 476940 --> 476940 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sdb is 476940 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb1 on /dev/sdb #8 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb2 on /dev/sdb #6 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb3 on /dev/sdb #4 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#517: 2 MB unallocated on /dev/sdb. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#527: Fine, no error in evaluate_drive_within_mountlist [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 3856 --> 3856 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sda is 3856 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda1 on /dev/sda #7 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda2 on /dev/sda #5 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda3 on /dev/sda #3 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#510: 979832 MB over-allocated on /dev/sda. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: 979832 MB over-allocated on /dev/sda. [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdb --> -1 or 476940 --> 476940 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sdb is 476940 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb1 on /dev/sdb #8 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb2 on /dev/sdb #6 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb3 on /dev/sdb #4 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#517: 2 MB unallocated on /dev/sdb. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#527: Fine, no error in evaluate_drive_within_mountlist [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 3856 --> 3856 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sda is 3856 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda1 on /dev/sda #7 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda2 on /dev/sda #5 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda3 on /dev/sda #3 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#510: 979832 MB over-allocated on /dev/sda. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: 979832 MB over-allocated on /dev/sda. [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdb --> -1 or 476940 --> 476940 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sdb is 476940 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb1 on /dev/sdb #8 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb2 on /dev/sdb #6 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb3 on /dev/sdb #4 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#510: 978882 MB over-allocated on /dev/sdb. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: 978882 MB over-allocated on /dev/sdb. [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 3856 --> 3856 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sda is 3856 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda1 on /dev/sda #7 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda2 on /dev/sda #5 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#476: /dev/sda2 is tiny! [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda3 on /dev/sda #3 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#517: 456866 MB unallocated on /dev/sda. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: /dev/sda2 is tiny! 456866 MB unallocated on /dev/sda. [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdb --> -1 or 476940 --> 476940 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sdb is 476940 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb1 on /dev/sdb #8 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb2 on /dev/sdb #6 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb3 on /dev/sdb #4 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#510: 978882 MB over-allocated on /dev/sdb. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: 978882 MB over-allocated on /dev/sdb. [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 3856 --> 3856 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sda is 3856 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda1 on /dev/sda #7 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda2 on /dev/sda #5 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#476: /dev/sda2 is tiny! [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda3 on /dev/sda #3 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#517: 456866 MB unallocated on /dev/sda. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: /dev/sda2 is tiny! 456866 MB unallocated on /dev/sda. [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdb --> -1 or 476940 --> 476940 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sdb is 476940 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb1 on /dev/sdb #8 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb2 on /dev/sdb #6 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb3 on /dev/sdb #4 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#510: 978882 MB over-allocated on /dev/sdb. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: 978882 MB over-allocated on /dev/sdb. [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 3856 --> 3856 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sda is 3856 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda1 on /dev/sda #7 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda2 on /dev/sda #5 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda3 on /dev/sda #3 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#510: 2842678 MB over-allocated on /dev/sda. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: 2842678 MB over-allocated on /dev/sda. [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdb --> -1 or 476940 --> 476940 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sdb is 476940 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb1 on /dev/sdb #8 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb2 on /dev/sdb #6 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb3 on /dev/sdb #4 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#510: 978882 MB over-allocated on /dev/sdb. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: 978882 MB over-allocated on /dev/sdb. [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 3856 --> 3856 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sda is 3856 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda1 on /dev/sda #7 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda2 on /dev/sda #5 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda3 on /dev/sda #3 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#510: 2842678 MB over-allocated on /dev/sda. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: 2842678 MB over-allocated on /dev/sda. [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdb --> -1 or 476940 --> 476940 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sdb is 476940 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb1 on /dev/sdb #8 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb2 on /dev/sdb #6 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb3 on /dev/sdb #4 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#510: 978882 MB over-allocated on /dev/sdb. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: 978882 MB over-allocated on /dev/sdb. [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 3856 --> 3856 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sda is 3856 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda1 on /dev/sda #7 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda2 on /dev/sda #5 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda3 on /dev/sda #3 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#510: 1863841 MB over-allocated on /dev/sda. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: 1863841 MB over-allocated on /dev/sda. [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdb --> -1 or 476940 --> 476940 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sdb is 476940 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb1 on /dev/sdb #8 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb2 on /dev/sdb #6 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb3 on /dev/sdb #4 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#510: 978882 MB over-allocated on /dev/sdb. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: 978882 MB over-allocated on /dev/sdb. [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 3856 --> 3856 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sda is 3856 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda1 on /dev/sda #7 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda2 on /dev/sda #5 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda3 on /dev/sda #3 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#510: 1863841 MB over-allocated on /dev/sda. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: 1863841 MB over-allocated on /dev/sda. [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdb --> -1 or 476940 --> 476940 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sdb is 476940 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb1 on /dev/sdb #8 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb2 on /dev/sdb #6 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb3 on /dev/sdb #4 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#510: 45 MB over-allocated on /dev/sdb. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: 45 MB over-allocated on /dev/sdb. [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 3856 --> 3856 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sda is 3856 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda1 on /dev/sda #7 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda2 on /dev/sda #5 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda3 on /dev/sda #3 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#510: 20841 MB over-allocated on /dev/sda. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: 20841 MB over-allocated on /dev/sda. [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdb --> -1 or 476940 --> 476940 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sdb is 476940 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb1 on /dev/sdb #8 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb2 on /dev/sdb #6 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb3 on /dev/sdb #4 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#510: 45 MB over-allocated on /dev/sdb. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: 45 MB over-allocated on /dev/sdb. [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 3856 --> 3856 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sda is 3856 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda1 on /dev/sda #7 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda2 on /dev/sda #5 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda3 on /dev/sda #3 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#510: 20841 MB over-allocated on /dev/sda. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: 20841 MB over-allocated on /dev/sda. [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdb --> -1 or 476940 --> 476940 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sdb is 476940 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb1 on /dev/sdb #8 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb2 on /dev/sdb #6 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb3 on /dev/sdb #4 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#510: 968 MB over-allocated on /dev/sdb. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: 968 MB over-allocated on /dev/sdb. [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 3856 --> 3856 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sda is 3856 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda1 on /dev/sda #7 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda2 on /dev/sda #5 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda3 on /dev/sda #3 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#510: 496247 MB over-allocated on /dev/sda. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: 496247 MB over-allocated on /dev/sda. [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdb --> -1 or 476940 --> 476940 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sdb is 476940 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb1 on /dev/sdb #8 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb2 on /dev/sdb #6 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb3 on /dev/sdb #4 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#510: 968 MB over-allocated on /dev/sdb. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: 968 MB over-allocated on /dev/sdb. [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 3856 --> 3856 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sda is 3856 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda1 on /dev/sda #7 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda2 on /dev/sda #5 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda3 on /dev/sda #3 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#510: 496247 MB over-allocated on /dev/sda. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: 496247 MB over-allocated on /dev/sda. [Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdb --> -1 or 476940 --> 476940 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sdb is 476940 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb1 on /dev/sdb #8 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb2 on /dev/sdb #6 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb3 on /dev/sdb #4 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#510: 23163 MB over-allocated on /dev/sdb. [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: 23163 MB over-allocated on /dev/sdb. [Main] mondo-rstr-newt.c->edit_mountlist_in_newt#2068: You pushed 'OK'. I shall now continue. [Main] mondo-rstr-newt.c->edit_mountlist#2099: leaving eml [Main] mondorestore.c->interactive_mode#497: Finished editing mountlist [Main] mondorestore.c->interactive_mode#501: Proceeding... [Main] libmondo-mountlist.c->save_mountlist_to_disk#938: save_mountlist_to_disk() --- saving to /tmp/mountlist.txt Restoring Interactively [Main] mondo-prep.c->partition_everything#1985: partition_everything() --- starting Partitioning hard drives Mountlist, including the partitions incorporated in RAID devices:- [Main] mondo-prep.c->partition_everything#1994: /dev/md2 [Main] mondo-prep.c->partition_everything#1994: /dev/md0 [Main] mondo-prep.c->partition_everything#1994: /dev/md1 [Main] mondo-prep.c->partition_everything#1994: /dev/sda3 [Main] mondo-prep.c->partition_everything#1994: /dev/sdb3 [Main] mondo-prep.c->partition_everything#1994: /dev/sda2 [Main] mondo-prep.c->partition_everything#1994: /dev/sdb2 [Main] mondo-prep.c->partition_everything#1994: /dev/sda1 [Main] mondo-prep.c->partition_everything#1994: /dev/sdb1 End of mountlist. Stopping all LVMs, just in case /tmp/i-want-my-lvm (No such file or directory) Stopping all software RAID devices, just in case Done. [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] mondo-prep.c->partition_drive#1532: Partitioning drive /dev/sda [Main] mondo-prep.c->partition_drive#1617: Found partition /dev/sda1 in mountlist [Main] mondo-prep.c->partition_drive#1620: Wiping /dev/sda's partition table [Main] mondo-prep.c->partition_drive#1642: New, kernel-friendly partition remover [Main] mondo-prep.c->partition_device#1771: partition_device('/dev/sda', 1, 0, 'raid', 1027072) --- starting [Main] mondo-prep.c->partition_device#1790: Partitioning device /dev/sda1 (1003 MB) [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/sda1 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda1 " > /dev/null 2> /dev/null' Found MBR partition table format type [Main] mondo-prep.c->partition_device#1869: Doing the new all-in-one fdisk thing [Main] mondo-prep.c->partition_device#1870: output = 'n p 1 +1027072K ' [Main] mondo-prep.c->partition_device#1875: Successfully created partition 1 on /dev/sda [Main] mondo-prep.c->partition_device#1881: Trying to set partition 1 type now on /dev/sda [Main] mondo-prep.c->set_partition_type#2140: Setting /dev/sda1's type to raid (fd) [Main] mondo-prep.c->partition_device#1951: partition_device() --- leaving [Main] mondo-prep.c->partition_drive#1617: Found partition /dev/sda2 in mountlist [Main] mondo-prep.c->partition_device#1771: partition_device('/dev/sda', 2, 1, 'raid', 20480000) --- starting [Main] mondo-prep.c->partition_device#1790: Partitioning device /dev/sda2 (20000 MB) [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/sda2 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda2 " > /dev/null 2> /dev/null' Found MBR partition table format type [Main] mondo-prep.c->partition_device#1869: Doing the new all-in-one fdisk thing [Main] mondo-prep.c->partition_device#1870: output = 'n p 2 +20480000K ' [Main] mondo-prep.c->partition_device#1875: Successfully created partition 2 on /dev/sda [Main] mondo-prep.c->partition_device#1881: Trying to set partition 2 type now on /dev/sda [Main] mondo-prep.c->set_partition_type#2140: Setting /dev/sda2's type to raid (fd) [Main] mondo-prep.c->partition_device#1951: partition_device() --- leaving [Main] mondo-prep.c->partition_drive#1617: Found partition /dev/sda3 in mountlist [Main] mondo-prep.c->partition_device#1771: partition_device('/dev/sda', 3, 2, 'raid', 490598400) --- starting [Main] mondo-prep.c->partition_device#1790: Partitioning device /dev/sda3 (479100 MB) [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/sda3 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda3 " > /dev/null 2> /dev/null' Found MBR partition table format type [Main] mondo-prep.c->partition_device#1869: Doing the new all-in-one fdisk thing [Main] mondo-prep.c->partition_device#1870: output = 'n p 3 +490598400K ' [Main] mondo-prep.c->partition_device#1875: Successfully created partition 3 on /dev/sda [Main] mondo-prep.c->partition_device#1881: Trying to set partition 3 type now on /dev/sda [Main] mondo-prep.c->set_partition_type#2140: Setting /dev/sda3's type to raid (fd) [Main] mondo-prep.c->partition_device#1951: partition_device() --- leaving ------------------- fdisk.log looks like this ------------------ Command (m for help): Selected partition 1 Command (m for help): 2: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): No partition is defined yet! Command (m for help): 1: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): No partition is defined yet! Command (m for help): 1: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): No partition is defined yet! Command (m for help): 1: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): No partition is defined yet! Command (m for help): 1: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): No partition is defined yet! Command (m for help): 1: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): No partition is defined yet! Command (m for help): 1: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): No partition is defined yet! Command (m for help): 1: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): No partition is defined yet! Command (m for help): 1: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): No partition is defined yet! Command (m for help): 1: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): No partition is defined yet! Command (m for help): 1: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): No partition is defined yet! Command (m for help): 9: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): No partition is defined yet! Command (m for help): 8: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): No partition is defined yet! Command (m for help): 7: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): No partition is defined yet! Command (m for help): 6: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): No partition is defined yet! Command (m for help): 5: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): No partition is defined yet! Command (m for help): 4: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): No partition is defined yet! Command (m for help): 3: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): No partition is defined yet! Command (m for help): 2: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): No partition is defined yet! Command (m for help): 1: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (1-491, default 1): Using default value 1 Last cylinder or +size or +sizeM or +sizeK (1-491, default 491): +1027072K Command (m for help): Command (m for help): Command (m for help): p Disk /dev/sda: 4043 MB, 4043309056 bytes 255 heads, 63 sectors/track, 491 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x04dd5721 Device Boot Start End Blocks Id System /dev/sda1 1 129 1036161 83 Linux Command (m for help): t Selected partition 1 Hex code (type L to list codes): fd Changed system type of partition 1 to fd (Linux raid autodetect) Command (m for help): Command (m for help): p Disk /dev/sda: 4043 MB, 4043309056 bytes 255 heads, 63 sectors/track, 491 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x04dd5721 Device Boot Start End Blocks Id System /dev/sda1 1 129 1036161 fd Linux raid autodetect Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 2 First cylinder (130-491, default 130): Using default value 130 Last cylinder or +size or +sizeM or +sizeK (130-491, default 491): +20480000K Value out of range. Last cylinder or +size or +sizeM or +sizeK (130-491, default 491): Using default value 491 Command (m for help): Command (m for help): p Disk /dev/sda: 4043 MB, 4043309056 bytes 255 heads, 63 sectors/track, 491 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x04dd5721 Device Boot Start End Blocks Id System /dev/sda1 1 129 1036161 fd Linux raid autodetect /dev/sda2 130 491 2907765 83 Linux Command (m for help): t Partition number (1-4): 2 Hex code (type L to list codes): fd Changed system type of partition 2 to fd (Linux raid autodetect) Command (m for help): Command (m for help): p Disk /dev/sda: 4043 MB, 4043309056 bytes 255 heads, 63 sectors/track, 491 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x04dd5721 Device Boot Start End Blocks Id System /dev/sda1 1 129 1036161 fd Linux raid autodetect /dev/sda2 130 491 2907765 fd Linux raid autodetect Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 3 No free sectors available Command (m for help): Command (m for help): +490598400K +: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): Command (m for help): Command (m for help): p Disk /dev/sda: 4043 MB, 4043309056 bytes 255 heads, 63 sectors/track, 491 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x04dd5721 Device Boot Start End Blocks Id System /dev/sda1 1 129 1036161 fd Linux raid autodetect /dev/sda2 130 491 2907765 fd Linux raid autodetect Command (m for help): t Partition number (1-4): 3 Partition 3 does not exist yet! Command (m for help): fd f: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): Command (m for help): p Disk /dev/sda: 4043 MB, 4043309056 bytes 255 heads, 63 sectors/track, 491 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x04dd5721 Device Boot Start End Blocks Id System /dev/sda1 1 129 1036161 fd Linux raid autodetect /dev/sda2 130 491 2907765 fd Linux raid autodetect Command (m for help): a Partition number (1-4): 1 Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks. ------------------- end of fdisk.log... word! ------------------ [Main] mondo-prep.c->partition_drive#1532: Partitioning drive /dev/sdb [Main] mondo-prep.c->partition_drive#1617: Found partition /dev/sdb1 in mountlist [Main] mondo-prep.c->partition_drive#1620: Wiping /dev/sdb's partition table [Main] mondo-prep.c->partition_drive#1642: New, kernel-friendly partition remover [Main] mondo-prep.c->partition_device#1771: partition_device('/dev/sdb', 1, 0, 'raid', 1027072) --- starting [Main] mondo-prep.c->partition_device#1790: Partitioning device /dev/sdb1 (1003 MB) [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/sdb1 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sdb1 " > /dev/null 2> /dev/null' Found MBR partition table format type [Main] mondo-prep.c->partition_device#1869: Doing the new all-in-one fdisk thing [Main] mondo-prep.c->partition_device#1870: output = 'n p 1 +1027072K ' [Main] mondo-prep.c->partition_device#1875: Successfully created partition 1 on /dev/sdb [Main] mondo-prep.c->partition_device#1881: Trying to set partition 1 type now on /dev/sdb [Main] mondo-prep.c->set_partition_type#2140: Setting /dev/sdb1's type to raid (fd) [Main] mondo-prep.c->partition_device#1951: partition_device() --- leaving [Main] mondo-prep.c->partition_drive#1617: Found partition /dev/sdb2 in mountlist [Main] mondo-prep.c->partition_device#1771: partition_device('/dev/sdb', 2, 1, 'raid', 20480000) --- starting [Main] mondo-prep.c->partition_device#1790: Partitioning device /dev/sdb2 (20000 MB) [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/sdb2 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sdb2 " > /dev/null 2> /dev/null' Found MBR partition table format type [Main] mondo-prep.c->partition_device#1869: Doing the new all-in-one fdisk thing [Main] mondo-prep.c->partition_device#1870: output = 'n p 2 +20480000K ' [Main] mondo-prep.c->partition_device#1875: Successfully created partition 2 on /dev/sdb [Main] mondo-prep.c->partition_device#1881: Trying to set partition 2 type now on /dev/sdb [Main] mondo-prep.c->set_partition_type#2140: Setting /dev/sdb2's type to raid (fd) [Main] mondo-prep.c->partition_device#1951: partition_device() --- leaving [Main] mondo-prep.c->partition_drive#1617: Found partition /dev/sdb3 in mountlist [Main] mondo-prep.c->partition_device#1771: partition_device('/dev/sdb', 3, 2, 'raid', 490598400) --- starting [Main] mondo-prep.c->partition_device#1790: Partitioning device /dev/sdb3 (479100 MB) [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/sdb3 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sdb3 " > /dev/null 2> /dev/null' Found MBR partition table format type [Main] mondo-prep.c->partition_device#1869: Doing the new all-in-one fdisk thing [Main] mondo-prep.c->partition_device#1870: output = 'n p 3 +490598400K ' [Main] mondo-prep.c->partition_device#1875: Successfully created partition 3 on /dev/sdb [Main] mondo-prep.c->partition_device#1881: Trying to set partition 3 type now on /dev/sdb [Main] mondo-prep.c->set_partition_type#2140: Setting /dev/sdb3's type to raid (fd) [Main] mondo-prep.c->partition_device#1951: partition_device() --- leaving ------------------- fdisk.log looks like this ------------------ The number of cylinders for this disk is set to 60801. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Warning: partition 4 has empty type Command (m for help): Partition number (1-4): Command (m for help): Partition number (1-4): Command (m for help): Selected partition 1 Command (m for help): 1: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (1-60801, default 1): Using default value 1 Last cylinder or +size or +sizeM or +sizeK (1-60801, default 60801): +1027072K Command (m for help): Command (m for help): Command (m for help): p Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x365b845d Device Boot Start End Blocks Id System /dev/sdb1 1 129 1036161 83 Linux Command (m for help): t Selected partition 1 Hex code (type L to list codes): fd Changed system type of partition 1 to fd (Linux raid autodetect) Command (m for help): Command (m for help): p Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x365b845d Device Boot Start End Blocks Id System /dev/sdb1 1 129 1036161 fd Linux raid autodetect Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 2 First cylinder (130-60801, default 130): Using default value 130 Last cylinder or +size or +sizeM or +sizeK (130-60801, default 60801): +20480000K Command (m for help): Command (m for help): Command (m for help): p Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x365b845d Device Boot Start End Blocks Id System /dev/sdb1 1 129 1036161 fd Linux raid autodetect /dev/sdb2 130 2680 20490907+ 83 Linux Command (m for help): t Partition number (1-4): 2 Hex code (type L to list codes): fd Changed system type of partition 2 to fd (Linux raid autodetect) Command (m for help): Command (m for help): p Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x365b845d Device Boot Start End Blocks Id System /dev/sdb1 1 129 1036161 fd Linux raid autodetect /dev/sdb2 130 2680 20490907+ fd Linux raid autodetect Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 3 First cylinder (2681-60801, default 2681): Using default value 2681 Last cylinder or +size or +sizeM or +sizeK (2681-60801, default 60801): +490598400K Value out of range. Last cylinder or +size or +sizeM or +sizeK (2681-60801, default 60801): Using default value 60801 Command (m for help): Command (m for help): p Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x365b845d Device Boot Start End Blocks Id System /dev/sdb1 1 129 1036161 fd Linux raid autodetect /dev/sdb2 130 2680 20490907+ fd Linux raid autodetect /dev/sdb3 2681 60801 466856932+ 83 Linux Command (m for help): t Partition number (1-4): 3 Hex code (type L to list codes): fd Changed system type of partition 3 to fd (Linux raid autodetect) Command (m for help): Command (m for help): p Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x365b845d Device Boot Start End Blocks Id System /dev/sdb1 1 129 1036161 fd Linux raid autodetect /dev/sdb2 130 2680 20490907+ fd Linux raid autodetect /dev/sdb3 2681 60801 466856932+ fd Linux raid autodetect Command (m for help): a Partition number (1-4): 1 Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks. ------------------- end of fdisk.log... word! ------------------ Done. [Main] mondo-prep.c->format_everything#965: format_everything (mountlist, interactively = false Formatting partitions [Main] mondo-prep.c->format_everything#977: Stopping all RAID devices [Main] mondo-prep.c->format_everything#983: Prepare soft-RAIDs [Main] mondo-prep.c->format_everything#986: Examining /dev/md2 [Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/md2 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/md2 " > /dev/null 2> /dev/null' Initializing RAID device /dev/md2 Stopping /dev/md2 running: which raidstop > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 [Main] mondo-prep.c->stop_raid_device#2275: program = mdadm -S /dev/md2 running: mdadm -S /dev/md2 > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- mdadm: stopped /dev/md2 --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-prep.c->format_device#835: Making /dev/md2 running: which mkraid > //mondo.tmp.yoMCLa/mondo-run-prog-thing.tmp 2> //mondo.tmp.yoMCLa/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 [Main] mondo-prep.c->create_raid_device_via_mdadm#578: 3 RAID arrays found. SIGABRT signal received from OS Abort - probably failed assertion. I'm sleeping for a few seconds so you can read the message.