14:34 Preparing udev environment... 14:34 udev started manually 14:34 Discovering with udevsettle 14:34 Extracted additional /dev entries OK. 14:34 Redirecting serial to /dev/tty 14:34 Engaging /proc/driver/cciss/cciss0 14:34 ...result=0 14:34 Trying 'mount /dev/shm -t tmpfs -o size=128m' 14:34 Great. Pivot succeeded w/ size=128m 14:34 Successfully mounted dynamic /tmp ramdisk 14:34 Starting Network... 14:34 Making DHCP request on eth0 14:34 Pinging Remote server... 14:34 Mounting Network share (155.161.44.146:/var/syslog/mondo/nessus-apac1) on /tmp/isodir... 14:34 Mounting Remote image nessus-apac1-1.iso in / on /mnt/cdrom in loopback 14:34 Installing additional tools ... 14:34 Starting install-additional-tools 14:34 PLEASE WAIT. Untarring data content 14:34 Populating / with tar file content... 14:34 Installing and removing BOOTLOADER.DEVICE BOOTLOADER.MBR BOOTLOADER.NAME FILES-IN-FILELIST LAST-FILELIST-NUMBER bin dev etc lib lib64 mondo sbin tmp usr var 14:34 Done. 14:34 Exiting install-additional-tools 14:35 klogd and syslogd have been started. 14:35 Using /lib/kbd/keymaps/i386/qwerty/us.map.gz keyboard map. 14:35 RAID controller(s) detected. Pausing 10 seconds to let them warm up. 14:35 Running 'mdadm' 14:35 Scanning LVM's... 14:35 LVM's have been started. 14:35 OK, we've found /mnt/cdrom/archives/*; great. 14:35 Config file is fine, BTW. 14:35 init (from mindi v2.1.0-r2930) 14:35 /proc/cmdline is: 14:35 ---------- initrd=pxelinux.cfg/nessus-apac1/initrd-mondo pci=bfsort load_ramdisk=1 prompt_ramdisk=0 ramdisk_size=131072 rw root=/dev/ram expert acpi=off apm=off lang= devfs=nomount exec-shield=0 pxe proto=nfs ipconf=eth0:dhcp netfsmount=155.161.44.146:/var/syslog/mondo/nessus-apac1 console=tty0 nicdelay=8 linksleep=8 BOOT_IMAGE=pxelinux.cfg/nessus-apac1/vmlinuz-mondo 14:35 ---------- 14:35 df result: 14:35 ---------- Filesystem 1K-blocks Used Available Use% Mounted on none 5120 144 4976 3% /dev none 4088148 0 4088148 0% /dev/shm /dev/shm 131072 1404 129668 2% /tmp 155.161.44.146:/var/syslog/mondo/nessus-apac1 151640448 72771360 71041824 51% /tmp/isodir /dev/loop0 1940168 1940168 0 100% /mnt/cdrom 14:35 ------------- 14:35 mount result: 14:35 ------------- rootfs on / type rootfs (rw) /proc/ on /proc type proc (rw) /sys/ on /sys type sysfs (rw) none on /proc/bus/usb type usbfs (rw) none on /dev type tmpfs (rw) none on /dev/pts type devpts (rw) none on /dev/shm type tmpfs (rw) /dev/shm on /tmp type tmpfs (rw) 155.161.44.146:/var/syslog/mondo/nessus-apac1 on /tmp/isodir type nfs (ro,vers=3,rsize=32768,wsize=32768,hard,nolock,proto=tcp,timeo=600,retrans=2,sec=sys,addr=155.161.44.146) /dev/loop0 on /mnt/cdrom type iso9660 (ro) nfsd on /proc/fs/nfsd type nfsd (rw) 14:35 ------------- 14:35 lsmod result: 14:35 ------------- Module Size Used by paride 42433 0 bnx2x 944273 0 igb 133973 0 forcedeth 90317 0 bnx2i 77665 0 cnic 84457 1 bnx2i be2iscsi 94173 0 cxgb3i 64849 0 libcxgbi 91597 1 cxgb3i cxgb3 215600 1 cxgb3i iscsi_tcp 50893 0 imm 47065 0 ppa 46417 0 libiscsi_tcp 53573 3 cxgb3i,libcxgbi,iscsi_tcp ib_iser 68161 0 libiscsi2 77765 7 bnx2i,be2iscsi,cxgb3i,libcxgbi,iscsi_tcp,libiscsi_tcp,ib_iser rdma_cm 68689 1 ib_iser ib_cm 72809 1 rdma_cm iw_cm 43465 1 rdma_cm ib_sa 74953 2 rdma_cm,ib_cm ib_mad 70757 2 ib_cm,ib_sa ib_core 104901 6 ib_iser,rdma_cm,ib_cm,iw_cm,ib_sa,ib_mad ib_addr 41673 1 rdma_cm scsi_transport_iscsi2 73945 6 bnx2i,be2iscsi,libcxgbi,iscsi_tcp,ib_iser,libiscsi2 i5k_amb 41673 0 cpufreq_ondemand 42449 0 freq_table 38977 1 cpufreq_ondemand hwmon 36553 1 i5k_amb serio_raw 40517 0 pcspkr 36289 0 i5000_edac 43337 0 edac_mc 61217 1 i5000_edac backlight 39873 0 parport_pc 62313 0 lp 47121 0 parport 73165 5 paride,imm,ppa,parport_pc,lp tpm_tis 48077 0 tpm 50273 1 tpm_tis tpm_bios 40897 1 tpm shpchp 70893 0 raid0 40513 0 dm_snapshot 52361 0 raid456 152673 0 dm_rdac 41673 0 dm_round_robin 36801 0 xor 38865 1 raid456 dm_zero 35265 0 raid1 56129 0 multipath 42177 0 dm_hp_sw 36673 0 raid10 55873 0 linear 38593 0 dm_emc 39105 0 dm_multipath 58713 4 dm_rdac,dm_round_robin,dm_hp_sw,dm_emc dm_mirror 54865 0 dm_log 45121 1 dm_mirror dm_mod 102673 10 dm_snapshot,dm_zero,dm_multipath,dm_mirror,dm_log hpilo 44497 0 uio 45777 1 cnic ext4 301753 0 ext3 169937 0 jbd2 97737 1 ext4 jbd 95025 1 ext3 msdos 42689 0 nfsd 287464 1 configfs 62045 0 xfs 514633 0 autofs4 63049 0 ipv6 436449 23 cnic xfrm_nalgo 43333 1 ipv6 8021q 58449 4 bnx2x,igb,forcedeth,cxgb3 crypto_api 42945 1 xfrm_nalgo mperf 35265 0 crc16 35137 1 ext4 ahci 73421 0 ata_piix 57669 0 pata_marvell 38977 0 pata_sil680 42693 0 pata_sis 48197 0 sata_nv 62025 0 sata_promise 48197 0 sata_svw 40901 0 sata_via 44101 0 libata 209233 9 ahci,ata_piix,pata_marvell,pata_sil680,pata_sis,sata_nv,sata_promise,sata_svw,sata_via cciss 125161 2 loop 48593 2 virtio_blk 41673 0 edd 43337 0 ide_cd 73825 0 ide_cs 44481 0 mptctl 65609 0 mptfc 52553 0 mptsas 86865 0 mptspi 54865 0 mptscsih 71233 3 mptfc,mptsas,mptspi mptbase 124101 5 mptctl,mptfc,mptsas,mptspi,mptscsih i2o_block 46817 0 i2o_core 78969 1 i2o_block 3c59x 79861 0 8139cp 58177 0 8139too 61377 0 bnx2 224205 0 e1000 162665 0 e1000e 175129 0 e100 70609 0 dca 41605 1 igb mdio 38465 1 bnx2x ne2k_pci 44961 0 8390 43717 1 ne2k_pci pcnet32 68933 0 libphy 53825 0 r8169 76613 0 mii 38849 6 3c59x,8139cp,8139too,e100,pcnet32,r8169 tg3 167753 0 virtio_net 48449 0 3w_9xxx 70629 0 3w_xxxx 60257 0 aacraid 107081 0 aic79xx 202777 0 aic7xxx 162681 0 arcmsr 65377 0 atp870u 64161 0 dc395x 67661 0 scsi_dh 42561 1 dm_multipath ide_scsi 51017 0 megaraid 73897 0 megaraid_mbox 66001 0 megaraid_mm 44921 1 megaraid_mbox megaraid_sas 108557 0 osst 84977 0 qla1280 150993 0 qla2xxx 1228033 0 scsi_transport_fc 83145 2 mptfc,qla2xxx scsi_transport_iscsi 35017 1 scsi_transport_iscsi2 scsi_transport_sas 68929 1 mptsas sd_mod 56513 0 sg 70649 0 sr_mod 50789 0 cdrom 68713 2 ide_cd,sr_mod st 72805 0 sym53c8xx 109545 0 scsi_transport_spi 59841 4 mptspi,aic79xx,aic7xxx,sym53c8xx ehci_hcd 66381 0 ohci_hcd 56181 0 uhci_hcd 57433 0 usbserial 67377 0 usb_storage 122913 0 scsi_mod 199897 43 bnx2i,be2iscsi,libcxgbi,iscsi_tcp,imm,ppa,ib_iser,libiscsi2,scsi_transport_iscsi2,dm_rdac,dm_hp_sw,libata,cciss,mptctl,mptfc,mptsas,mptspi,mptscsih,3w_9xxx,3w_xxxx,aacraid,aic79xx,aic7xxx,arcmsr,atp870u,dc395x,scsi_dh,ide_scsi,megaraid,megaraid_mbox,megaraid_sas,osst,qla1280,qla2xxx,scsi_transport_fc,scsi_transport_sas,sd_mod,sg,sr_mod,st,sym53c8xx,scsi_transport_spi,usb_storage virtio_balloon 41025 0 virtio_pci 41673 0 virtio 39365 4 virtio_blk,virtio_net,virtio_balloon,virtio_pci virtio_ring 37953 1 virtio_pci exportfs 38849 1 nfsd fscache 52513 0 fuse 83057 0 nfs 293145 1 lockd 101425 2 nfsd,nfs nfs_acl 36673 2 nfsd,nfs nls_iso8859_1 38209 0 nls_utf8 35137 1 vfat 46529 0 fat 85745 2 msdos,vfat auth_rpcgss 81889 1 nfsd sunrpc 203273 10 nfsd,nfs,lockd,nfs_acl,auth_rpcgss 14:35 ------------- 14:35 dmesg result: 14:35 ------------- Linux version 2.6.18-274.12.1.el5 (mockbuild@x86-001.build.bos.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-51)) #1 SMP Tue Nov 8 21:37:35 EST 2011 Command line: initrd=pxelinux.cfg/nessus-apac1/initrd-mondo pci=bfsort load_ramdisk=1 prompt_ramdisk=0 ramdisk_size=131072 rw root=/dev/ram expert acpi=off apm=off lang= devfs=nomount exec-shield=0 pxe proto=nfs ipconf=eth0:dhcp netfsmount=155.161.44.146:/var/syslog/mondo/nessus-apac1 console=tty0 nicdelay=8 linksleep=8 BOOT_IMAGE=pxelinux.cfg/nessus-apac1/vmlinuz-mondo BIOS-provided physical RAM map: BIOS-e820: 0000000000010000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfe54000 (usable) BIOS-e820: 00000000cfe54000 - 00000000cfe5c000 (ACPI data) BIOS-e820: 00000000cfe5c000 - 00000000cfe5d000 (usable) BIOS-e820: 00000000cfe5d000 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000022ffff000 (usable) DMI 2.4 present. DMI: HP ProLiant DL380 G5, BIOS P56 04/26/2010 No NUMA configuration found Faking a node at 0000000000000000-000000022ffff000 Bootmem setup node 0 0000000000000000-000000022ffff000 bootmap start 20000 pages 70 Memory for crash kernel (0x0 to 0x0) notwithin permissible range disabling kdump Setting up node 0 0-22ffff On node 0 totalpages: 2063752 DMA zone: 2427 pages, LIFO batch:0 DMA32 zone: 833165 pages, LIFO batch:31 Normal zone: 1228160 pages, LIFO batch:31 Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: HP Product ID: PROLIANT APIC at: 0xFEE00000 Processor #0 6:7 APIC version 20 Processor #1 6:7 APIC version 20 Processor #2 6:7 APIC version 20 Processor #3 6:7 APIC version 20 Processor #4 6:7 APIC version 20 Processor #5 6:7 APIC version 20 Processor #6 6:7 APIC version 20 Processor #7 6:7 APIC version 20 I/O APIC #8 Version 32 at 0xFEC00000. Setting APIC routing to physical flat Processors: 8 Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000f0000 Nosave address range: 00000000000f0000 - 0000000000100000 Nosave address range: 00000000cfe54000 - 00000000cfe5c000 Nosave address range: 00000000cfe5d000 - 00000000d0000000 Nosave address range: 00000000d0000000 - 00000000e0000000 Nosave address range: 00000000e0000000 - 00000000f0000000 Nosave address range: 00000000f0000000 - 00000000fec00000 Nosave address range: 00000000fec00000 - 00000000fed00000 Nosave address range: 00000000fed00000 - 00000000fee00000 Nosave address range: 00000000fee00000 - 00000000fee10000 Nosave address range: 00000000fee10000 - 00000000ffc00000 Nosave address range: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) SMP: Allowing 8 CPUs, 0 hotplug CPUs Built 1 zonelists. Total pages: 2063752 Kernel command line: initrd=pxelinux.cfg/nessus-apac1/initrd-mondo pci=bfsort load_ramdisk=1 prompt_ramdisk=0 ramdisk_size=131072 rw root=/dev/ram expert acpi=off apm=off lang= devfs=nomount exec-shield=0 pxe proto=nfs ipconf=eth0:dhcp netfsmount=155.161.44.146:/var/syslog/mondo/nessus-apac1 console=tty0 nicdelay=8 linksleep=8 BOOT_IMAGE=pxelinux.cfg/nessus-apac1/vmlinuz-mondo Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Checking aperture... ACPI: DMAR not present PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x1c5e000 - 0x5c5e000 Memory: 8166068k/9175036k available (2606k kernel code, 220376k reserved, 1662k data, 224k init) Calibrating delay loop (skipped), value calculated using timer frequency.. 6333.50 BogoMIPS (lpj=3166754) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) SMP alternatives: switching to UP code ExtINT not setup in hardware but reported by MP table Using IO-APIC 8 GSI 16 sharing vector 0xA9 and IRQ 16 GSI 17 sharing vector 0xB1 and IRQ 17 GSI 18 sharing vector 0xB9 and IRQ 18 GSI 19 sharing vector 0xC1 and IRQ 19 GSI 21 sharing vector 0xC9 and IRQ 21 GSI 22 sharing vector 0xD1 and IRQ 22 GSI 23 sharing vector 0xD9 and IRQ 23 Using local APIC timer interrupts. Detected 20.833 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/8 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 6332.44 BogoMIPS (lpj=3166220) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU X5460 @ 3.16GHz stepping 06 SMP alternatives: switching to SMP code Booting processor 2/8 APIC 0x2 Initializing CPU#2 Calibrating delay using timer specific routine.. 6332.42 BogoMIPS (lpj=3166214) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU2: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU X5460 @ 3.16GHz stepping 06 SMP alternatives: switching to SMP code Booting processor 3/8 APIC 0x3 Initializing CPU#3 Calibrating delay using timer specific routine.. 6332.37 BogoMIPS (lpj=3166186) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU3: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU X5460 @ 3.16GHz stepping 06 SMP alternatives: switching to SMP code Booting processor 4/8 APIC 0x4 Initializing CPU#4 Calibrating delay using timer specific routine.. 6332.52 BogoMIPS (lpj=3166262) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 CPU4: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU X5460 @ 3.16GHz stepping 06 SMP alternatives: switching to SMP code Booting processor 5/8 APIC 0x5 Initializing CPU#5 Calibrating delay using timer specific routine.. 6332.62 BogoMIPS (lpj=3166310) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 CPU5: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU X5460 @ 3.16GHz stepping 06 SMP alternatives: switching to SMP code Booting processor 6/8 APIC 0x6 Initializing CPU#6 Calibrating delay using timer specific routine.. 6332.55 BogoMIPS (lpj=3166275) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 1 CPU: Processor Core ID: 2 CPU6: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU X5460 @ 3.16GHz stepping 06 SMP alternatives: switching to SMP code Booting processor 7/8 APIC 0x7 Initializing CPU#7 Calibrating delay using timer specific routine.. 6332.32 BogoMIPS (lpj=3166163) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 1 CPU: Processor Core ID: 3 CPU7: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU X5460 @ 3.16GHz stepping 06 Brought up 8 CPUs CPU#0: NMI watchdog performance counter calibration - 571->591 CPU#1: NMI watchdog performance counter calibration - 62->82 CPU#2: NMI watchdog performance counter calibration - 61->81 CPU#3: NMI watchdog performance counter calibration - 62->82 CPU#4: NMI watchdog performance counter calibration - 61->80 CPU#5: NMI watchdog performance counter calibration - 61->80 CPU#6: NMI watchdog performance counter calibration - 60->80 CPU#7: NMI watchdog performance counter calibration - 60->80 NMI watchdog testing PASSED. time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer. time.c: Detected 3166.754 MHz processor. sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=216 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=96 bytes sizeof(skbuff)=248 bytes migration_cost=28,12475 checking if image is initramfs... it is Freeing initrd memory: 10004k freed NET: Registered protocol family 16 PCI: Using configuration type 1 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] ACPI Error (tbget-0168): Invalid address flags 8 [20060707] PCI: Transparent bridge - 0000:00:1e.0 PCI->APIC IRQ transform: 0000:00:1c.0[A] -> IRQ 169 PCI->APIC IRQ transform: 0000:00:1c.1[B] -> IRQ 177 PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 169 PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 177 PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 185 PCI->APIC IRQ transform: 0000:00:1d.3[D] -> IRQ 193 PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 169 PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 177 PCI->APIC IRQ transform: 0000:0a:00.0[A] -> IRQ 169 PCI->APIC IRQ transform: 0000:0a:01.0[A] -> IRQ 177 PCI->APIC IRQ transform: 0000:0a:02.0[A] -> IRQ 185 PCI->APIC IRQ transform: 0000:06:00.0[A] -> IRQ 185 PCI->APIC IRQ transform: 0000:03:00.0[A] -> IRQ 169 PCI->APIC IRQ transform: 0000:05:00.0[A] -> IRQ 177 PCI->APIC IRQ transform: 0000:01:03.0[A] -> IRQ 217 PCI->APIC IRQ transform: 0000:01:04.0[A] -> IRQ 201 PCI->APIC IRQ transform: 0000:01:04.2[B] -> IRQ 209 PCI->APIC IRQ transform: 0000:01:04.4[B] -> IRQ 209 PCI->APIC IRQ transform: 0000:01:04.6[A] -> IRQ 201 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default ACPI: DMAR not present PCI-GART: No AMD northbridge found. PCI: Bridge: 0000:0a:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:0a:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:0a:02.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:09:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:09:00.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: fdf00000-fdffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: 4000-4fff MEM window: fdd00000-fdefffff PREFETCH window 0x00000000d1000000-0x00000000d10fffff PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:07.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:00.0 IO window: disabled. MEM window: f8000000-f9ffffff PREFETCH window 0x00000000d1100000-0x00000000d11fffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: f8000000-f9ffffff PREFETCH window 0x00000000d1100000-0x00000000d11fffff PCI: Bridge: 0000:04:00.0 IO window: disabled. MEM window: fa000000-fbffffff PREFETCH window 0x00000000d1200000-0x00000000d12fffff PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: fa000000-fbffffff PREFETCH window 0x00000000d1200000-0x00000000d12fffff PCI: Bridge: 0000:00:1e.0 IO window: 2000-3fff MEM window: f7e00000-f7ffffff PREFETCH window 0x00000000d8000000-0x00000000dfffffff PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:09:00.0 to 64 PCI: Setting latency timer of device 0000:0a:00.0 to 64 PCI: Setting latency timer of device 0000:0a:01.0 to 64 PCI: Setting latency timer of device 0000:0a:02.0 to 64 PCI: Setting latency timer of device 0000:09:00.3 to 64 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:05.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:07.0 to 64 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:02:00.0 to 64 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:04:00.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) type=2000 audit(1326206068.568:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API alg: No test for crc32c (crc32c-generic) ksign: Installing public key data Loading keyring - Added public key E70F50B4786C7599 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:03.0 PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:05.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:07.0 to 64 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:09:00.0 to 64 PCI: Setting latency timer of device 0000:0a:00.0 to 64 PCI: Setting latency timer of device 0000:0a:01.0 to 64 PCI: Setting latency timer of device 0000:0a:02.0 to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ESB2: IDE controller at PCI slot 0000:00:1f.1 ESB2: chipset revision 9 ESB2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x0500-0x0507, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x0508-0x050f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: Optiarc DVD RW AD-7561A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Initalizing network drop monitor service Freeing unused kernel memory: 224k freed Write protecting the kernel read-only data: 527k fuse init (API version 7.10) FS-Cache: Loaded SCSI subsystem initialized Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core USB Universal Host Controller Interface driver v3.0 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 177, io base 0x00001020 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 185, io base 0x00001040 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 193, io base 0x00001060 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:01:04.4: UHCI Host Controller uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 5 uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:01:04.4: irq 209, io base 0x00003800 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 169, io mem 0xf7df0000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 8 ports detected st: Version 20070203, fixed bufsize 32768, s/g segs 256 usb 5-1: new full speed USB device using uhci_hcd and address 2 QLogic Fibre Channel HBA Driver osst :I: Tape driver with OnStream support version 0.99.4 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ megasas: 00.00.05.38-rh1 Tue. May. 3 17:00:00 PDT 2011 megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) usb 5-1: configuration #1 chosen from 1 choice input: HP Virtual Keyboard as /class/input/input0 input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1 input: HP Virtual Keyboard as /class/input/input1 input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1 ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: Optiarc Model: DVD RW AD-7561A Rev: GH53 Type: CD-ROM ANSI SCSI revision: 00 sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sr 0:0:0:0: Attached scsi generic sg0 type 5 GDT-HA: Storage RAID Controller Driver. Version: 3.05 GDT-HA: Found 0 PCI Storage RAID Controllers Adaptec aacraid driver 1.1-5[24702] 3ware Storage Controller device driver for Linux v1.26.03.000-2.6.18RH. 3ware 9000 Storage Controller device driver for Linux v2.26.08.007-2.6.18RH. Generic PHY: Registered new driver pcnet32.c:v1.32 18.Mar.2006 tsbogend@alpha.franken.de ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html dca service started, version 1.8 e100: Intel(R) PRO/100 Network Driver, 3.5.10-k3-1-NAPI e100: Copyright(c) 1999-2005 Intel Corporation e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2 e1000e: Copyright(c) 1999 - 2011 Intel Corporation. Intel(R) PRO/1000 Network Driver - version 7.3.21-k4-3-NAPI Copyright (c) 1999-2006 Intel Corporation. bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.21 (Dec 23, 2010) eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 169, node addr 00215aec90c8 eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 177, node addr 00215aec90c6 8139too Fast Ethernet driver 0.9.27 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) I2O subsystem v1.325 i2o: max drivers = 8 I2O Block Device OSM v1.325 block-osm: registered device at major 80 Fusion MPT base driver 3.04.18rh Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.18rh Fusion MPT SAS Host driver 3.04.18rh Fusion MPT FC Host driver 3.04.18rh Fusion MPT misc device (ioctl) driver 3.04.18rh mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=10,220) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found loop: loaded (max 8 devices) Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found work still pending HP CISS Driver (v 3.6.28-RH1) cciss 0000:06:00.0: cciss: Trying to put board into performant mode cciss 0000:06:00.0: Placing controller into performant mode cciss/c0d0: p1 p2 p3 libata version 3.00 loaded. scsi1 : cciss bnx2 0000:03:00.0: eth0: using MSI bnx2 0000:03:00.0: eth0: NIC Copper Link is Up, 100 Mbps full duplex ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem Installing knfsd (copyright (C) 1996 okir@monad.swb.de). device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.6 loaded device-mapper: multipath emc: version 0.0.3 loaded md: linear personality registered for level -1 md: raid10 personality registered for level 10 device-mapper: multipath hp-sw: version 1.0.0 loaded md: multipath personality registered for level -4 md: raid1 personality registered for level 1 raid5: automatically using best checksumming function: generic_sse generic_sse: 11768.000 MB/sec raid5: using function: generic_sse (11768.000 MB/sec) device-mapper: multipath round-robin: version 1.0.0 loaded device-mapper: multipath rdac: rdac: version 0.4 loaded raid6: int64x1 2605 MB/s raid6: int64x2 3203 MB/s raid6: int64x4 3062 MB/s raid6: int64x8 2500 MB/s raid6: sse2x1 3488 MB/s raid6: sse2x2 7316 MB/s raid6: sse2x4 8058 MB/s raid6: using algorithm sse2x4 (8058 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: raid0 personality registered for level 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 lp: driver loaded but no devices found EDAC MC: Ver: 2.0.1 Nov 8 2011 EDAC MC0: Giving out device to i5000_edac.c I5000: DEV 0000:00:10.0 input: PC Speaker as /class/input/input2 Loading iSCSI transport class v2.0-871. iscsi: registered transport (iser) ppa: Version 2.07 (for Linux 2.4.x) imm: Version 2.05 (for Linux 2.4.0) iscsi: registered transport (tcp) libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0. Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010) iscsi: registered transport (cxgb3i) iscsi: registered transport (be2iscsi) GDT-HA: Storage RAID Controller Driver. Version: 3.05 GDT-HA: Found 0 PCI Storage RAID Controllers cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.13 (Jan 31, 2011) Broadcom NetXtreme II iSCSI Driver bnx2i v2.6.2.3 (Dec 31, 2010) iscsi: registered transport (bnx2i) Intel(R) Gigabit Ethernet Network Driver - version 3.0.6-k2-1 Copyright (c) 2007-2011 Intel Corporation. Broadcom NetXtreme II 5771x 10Gigabit Ethernet Driver bnx2x 1.62.00-6 (2011/01/30) Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found work still pending eth0: no IPv6 routers present 14:35 ------------- 14:35 /proc/swaps: 14:35 ------------- 14:35 ------------- 14:35 /proc/filesystems: 14:35 ------------- nodev sysfs nodev rootfs nodev bdev nodev proc nodev cpuset nodev binfmt_misc nodev debugfs nodev securityfs nodev sockfs nodev usbfs nodev pipefs nodev anon_inodefs nodev futexfs nodev tmpfs nodev inotifyfs nodev eventpollfs nodev devpts ext2 nodev ramfs nodev hugetlbfs iso9660 nodev mqueue nodev selinuxfs nodev rpc_pipefs vfat nodev nfs nodev nfs4 nodev fuse fuseblk nodev fusectl nodev autofs xfs nodev configfs nodev nfsd msdos ext3 ext4 ext4dev 14:35 ------------- 14:35 /proc/partitions: 14:35 ------------- major minor #blocks name 7 0 1940168 loop0 104 0 143338560 cciss/c0d0 104 1 526304 cciss/c0d0p1 104 2 12582720 cciss/c0d0p2 104 3 130229520 cciss/c0d0p3 252 0 16777216 dm-0 252 1 8388608 dm-1 252 2 20971520 dm-2 252 3 8388608 dm-3 14:35 ------------- 14:35 fdisk result: 14:35 ------------- Disk /dev/cciss/c0d0: 146.7 GB, 146778685440 bytes 255 heads, 32 sectors/track, 35132 cylinders Units = cylinders of 8160 * 512 = 4177920 bytes Device Boot Start End Blocks Id System /dev/cciss/c0d0p1 * 1 129 526304 83 Linux /dev/cciss/c0d0p2 130 3213 12582720 82 Linux swap / Solaris /dev/cciss/c0d0p3 3214 35132 130229520 8e Linux LVM 14:35 ------------- 14:35 /tmp/mondo-restore.cfg result: 14:35 ------------- media-size 0 files-in-filelist 238366 last-filelist-number 272 internal-tape-block-size 32768 use-lzo no use-gzip no use-star no use-comp yes datestamp Tue Jan 10 11:33:56 SGT 2012 total-slices 6 netfs-client-ipaddr 155.161.44.157 netfs-client-netmask 255.255.255.0 netfs-client-broadcast 155.161.44.255 netfs-client-hwaddr 00:21:5A:EC:90:C8 netfs-client-defgw 155.161.44.1 netfs-server-mount 155.161.44.146:/var/syslog/mondo/nessus-apac1 netfs-server-path / netfs-dev eth0 netfs-proto nfs netfs-server-ipaddr 155.161.44.146 iso-prefix nessus-apac1 bootloader.device /dev/cciss/c0d0 bootloader.name GRUB backup-media-type netfs differential 0 14:35 backup-media-type is specified in config file - great. 14:35 Calling post-init 14:35 Executing preliminary script Here is my /tmp/mountlist.txt /dev/cciss/c0d0p3 lvm lvm 130229520 /dev/vg00/root / ext3 lvm /dev/vg00/var /var ext3 lvm /dev/vg00/opt /opt ext3 lvm /dev/vg00/home /home ext3 lvm /dev/cciss/c0d0p1 /boot ext3 526304 /boot /dev/cciss/c0d0p2 swap swap 12582712 SW-cciss/c0d0p2 14:35 mondorestore found; cool... 14:35 mount-me found 14:35 unmount-me found 14:35 mondorestore found 14:35 ------------------EXPERT MODE------------------ 14:35 You do all the work. :-) 14:35 Type 'mondorestore' to begin the restore/compare process. 14:35 Launching Shell [TH=10631] libmondo-tools.c->reset_bkpinfo#772: Hi root is mounted at rootfs No, Schlomo, that doesn't mean rootfs is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [TH=10631] libmondo-devices.c->am_I_in_disaster_recovery_mode#164: Is this a ramdisk? result = 1 [TH=10631] libmondo-devices.c->sensibly_set_tmpdir_and_scratchdir#2974: bkpinfo->tmpdir is being set to //mondo.tmp.Hc8f3Q [TH=10631] libmondo-devices.c->sensibly_set_tmpdir_and_scratchdir#2985: bkpinfo->scratchdir is being set to //mondo.scratch.17767 running: mkdir -p /mnt/cdrom > //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.tmp 2> //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) root is mounted at rootfs No, Schlomo, that doesn't mean rootfs is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [TH=10631] libmondo-devices.c->am_I_in_disaster_recovery_mode#164: Is this a ramdisk? result = 1 running: mount / -o remount,rw > //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.tmp 2> //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-tools.c->get_kernel_version#254: g_kernel_version = 2.618000 [Main] mondorestore.c->main#2893: FYI - g_mountlist_fname = /tmp/mountlist.txt running: cp -f /tmp/mountlist.txt /tmp/mountlist.txt.orig > //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.tmp 2> //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: umount -d /mnt/cdrom > //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.tmp 2> //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.err --------------------------------start of output----------------------------- umount: can't umount /mnt/cdrom: Invalid argument --------------------------------end of output------------------------------ ...ran with res=256 running: rm -Rf /tmp/tmpfs/mondo.tmp.* > //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.tmp 2> //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) -------------- Mondo Restore v3.0.0-r2930 ------------- DON'T PANIC! Mondorestore logs almost everything, so please don't break out in a cold sweat just because you see a few error messages in the log. Read them; analyze them; see if they are significant; above all, verify your backups! Please attach a compressed copy of this log to any e-mail you send to the Mondo mailing list when you are seeking technical support. Without it, we can't help you. - DevTeam ------------------------------------------------------------ BTW, despite (or perhaps because of) the wealth of messages, some users are inclined to stop reading this log. If Mondo stopped for some reason, chances are it's detailed here. More than likely there's a message at the very end of this log that will tell you what is wrong. Please read it! ------------------------------------------------------------ [Main] mondorestore.c->main#2928: I am in disaster recovery mode [Main] mondorestore.c->main#2933: what time is it [Main] libmondo-cli.c->handle_incoming_parameters#100: Switches:- [Main] mondorestore.c->main#3108: I must be in disaster recovery mode. [Main] mondorestore.c->main#3109: FYI, MOUNTLIST_FNAME = /tmp/mountlist.txt [Main] mondorestore.c->main#3111: About to call load_mountlist and load_raidtab [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#765: Backup medium is CD-R[W] [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#804: Internal tape block size has been custom-set to 32768 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#843: differential var = '0' [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#847: This is a regular (full) backup [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#871: netfs_mount is 155.161.44.146:/var/syslog/mondo/nessus-apac1 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#872: netfs_proto is nfs [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#876: netfs_remote_dir is / [Main] libmondo-mountlist.c->load_mountlist#830: Loading mountlist... [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/cciss/c0d0p3 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/cciss/c0d0p3 lvm lvm 130229520 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/vg00/root [Main] libmondo-mountlist.c->load_mountlist#901: /dev/vg00/root / ext3 0 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/vg00/var [Main] libmondo-mountlist.c->load_mountlist#901: /dev/vg00/var /var ext3 0 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/vg00/opt [Main] libmondo-mountlist.c->load_mountlist#901: /dev/vg00/opt /opt ext3 0 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/vg00/home [Main] libmondo-mountlist.c->load_mountlist#901: /dev/vg00/home /home ext3 0 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/cciss/c0d0p1 /boot ext3 526304 /boot [Main] libmondo-mountlist.c->load_mountlist#901: /dev/cciss/c0d0p2 swap swap 12582712 SW-cciss/c0d0p2 [Main] libmondo-mountlist.c->load_mountlist#913: Mountlist loaded successfully. [Main] libmondo-mountlist.c->load_mountlist#914: 7 entries in mountlist [Main] libmondo-files.c->length_of_file#537: filename=/etc/raidtab Unable to openin filename (No such file or directory) [Main] libmondo-raid.c->load_raidtab_into_raidlist#613: Raidtab is very small or non-existent. Ignoring it. [Main] mondorestore.c->main#3116: Returned from calling load_mountlist and load_raidtab successfully [Main] mondorestore.c->main#3151: Send in the clowns. [Main] mondorestore.c->main#3158: catchall [Main] mondorestore.c->catchall_mode#265: inside catchall [Main] mondorestore.c->catchall_mode#270: pre wrm [Main] mondorestore.c->catchall_mode#272: post wrm [Main] mondorestore.c->catchall_mode#289: post int [Main] mondorestore.c->catchall_mode#305: NM selected [Main] mondorestore.c->nuke_mode#778: nuke_mode --- starting [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2131: gcffa --- starting I'm thinking... running: mkdir -p //mondo.tmp.Hc8f3Q/mount.bootdisk > //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.tmp 2> //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2147: mountpt = //mondo.tmp.Hc8f3Q/mount.bootdisk; cfg_file=//mondo.tmp.Hc8f3Q/tmp/mondo-restore.cfg [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2150: gcffa --- we don't have cfg file yet. [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2154: gcffa --- calling mount_media now :) running: mount | grep -F /mnt/cdrom > //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.tmp 2> //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 [Main] libmondo-devices.c->mount_media#1387: Mounting for Network thingy [Main] libmondo-devices.c->mount_media#1388: isodir = / root is mounted at rootfs No, Schlomo, that doesn't mean rootfs is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [Main] libmondo-devices.c->am_I_in_disaster_recovery_mode#164: Is this a ramdisk? result = 1 [Main] libmondo-devices.c->mount_media#1392: isodir is being set to /tmp/isodir [Main] libmondo-devices.c->mount_media#1449: (mount_media) --- command = mount /tmp/isodir///nessus-apac1-1.iso -t iso9660 -o loop,ro /mnt/cdrom running: mount /tmp/isodir///nessus-apac1-1.iso -t iso9660 -o loop,ro /mnt/cdrom > //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.tmp 2> //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-devices.c->mount_media#1464: Mounted media drive OK [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2157: gcffa --- managed to mount CD; so, no need for Plan B [Main] libmondo-devices.c->is_this_device_mounted#1138: Is /mnt/cdrom mounted? [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2212: gcffa --- Plan B, a.k.a. untarring some file from all.tar.gz running: tar -zxvf /mnt/cdrom/images/all.tar.gz ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm > //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.tmp 2> //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.err --------------------------------start of output----------------------------- ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/mountlist.txt ./tmp/i-want-my-lvm --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2228: gcffa --- great! We've got the config file [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2233: cp -f /mondo.tmp.Hc8f3Q/tmp/mondo-restore.cfg //mondo.tmp.Hc8f3Q/tmp/mondo-restore.cfg running: cp -f /mondo.tmp.Hc8f3Q/tmp/mondo-restore.cfg //mondo.tmp.Hc8f3Q/tmp/mondo-restore.cfg > //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.tmp 2> //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.err --------------------------------start of output----------------------------- cp: '/mondo.tmp.Hc8f3Q/tmp/mondo-restore.cfg' and '//mondo.tmp.Hc8f3Q/tmp/mondo-restore.cfg' are the same file --------------------------------end of output------------------------------ ...ran with res=256 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2238: ... but an error occurred when I tried to move it to //mondo.tmp.Hc8f3Q/tmp/mondo-restore.cfg [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2245: cp -f /mondo.tmp.Hc8f3Q/tmp/mountlist.txt //mondo.tmp.Hc8f3Q/tmp/mountlist.txt running: umount -d /mnt/cdrom > //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.tmp 2> //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) Recovered mondo-restore.cfg running: cp -f //mondo.tmp.Hc8f3Q/tmp/mondo-restore.cfg /tmp/mondo-restore.cfg > //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.tmp 2> //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: cp -f etc/raidtab /etc/ > //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.tmp 2> //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.err --------------------------------start of output----------------------------- cp: can't stat 'etc/raidtab': No such file or directory --------------------------------end of output------------------------------ ...ran with res=256 [Main] libmondo-mountlist.c->load_mountlist#830: Loading mountlist... [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/cciss/c0d0p3 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/cciss/c0d0p3 lvm lvm 130229520 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/vg00/root [Main] libmondo-mountlist.c->load_mountlist#901: /dev/vg00/root / ext3 0 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/vg00/var [Main] libmondo-mountlist.c->load_mountlist#901: /dev/vg00/var /var ext3 0 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/vg00/opt [Main] libmondo-mountlist.c->load_mountlist#901: /dev/vg00/opt /opt ext3 0 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/vg00/home [Main] libmondo-mountlist.c->load_mountlist#901: /dev/vg00/home /home ext3 0 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/cciss/c0d0p1 /boot ext3 526304 /boot [Main] libmondo-mountlist.c->load_mountlist#901: /dev/cciss/c0d0p2 swap swap 12582712 SW-cciss/c0d0p2 [Main] libmondo-mountlist.c->load_mountlist#913: Mountlist loaded successfully. [Main] libmondo-mountlist.c->load_mountlist#914: 7 entries in mountlist [Main] mondo-prep.c->resize_mountlist_proportionately_to_suit_new_drives#2621: Resizing mountlist [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] mondo-prep.c->resize_mountlist_proportionately_to_suit_new_drives#2623: Back from MLoDiM [Main] libmondo-devices.c->get_phys_size_of_drive#1040: /dev/cciss/c0d0 --> -1 or 139979 --> 139979 Expanding entries to suit drive /dev/cciss/c0d0 (139979 MB) [Main] mondo-prep.c->create_mountlist_for_drive#2653: Creating list of partitions for drive /dev/cciss/c0d0 Disk /dev/cciss/c0d0 was 139979 MB; is now 139979 MB; Proportionally resizing partitions (factor ~= 0) Changing /dev/cciss/c0d0p3 from 130229520 KB to 0 KB Changing /dev/cciss/c0d0p1 from 526304 KB to 0 KB Changing /dev/cciss/c0d0p2 from 12582712 KB to 0 KB Last partition size calculated would be under-allocated, increasing /dev/cciss/c0d0p2 from 0 KB to 143338496 KB. final_size = 139979 MB Mountlist adjusted to suit current hard drive(s) [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1040: /dev/cciss/c0d0 --> -1 or 139979 --> 139979 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/cciss/c0d0 is 139979 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/cciss/c0d0p1 on /dev/cciss/c0d0 #5 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#476: /dev/cciss/c0d0p1 is tiny! [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/cciss/c0d0p2 on /dev/cciss/c0d0 #6 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/cciss/c0d0p3 on /dev/cciss/c0d0 #0 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: /dev/cciss/c0d0p1 is tiny! [Main] mondorestore.c->interactive_mode#449: interactive_mode --- starting (great, assertions OK) [Main] mondorestore.c->interactive_mode#458: interactive_mode --- assertions OK [Main] mondorestore.c->interactive_mode#468: About to load config file [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2131: gcffa --- starting I'm thinking... running: mkdir -p //mondo.tmp.Hc8f3Q/mount.bootdisk > //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.tmp 2> //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2147: mountpt = //mondo.tmp.Hc8f3Q/mount.bootdisk; cfg_file=//mondo.tmp.Hc8f3Q/tmp/mondo-restore.cfg [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2150: gcffa --- we don't have cfg file yet. [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2154: gcffa --- calling mount_media now :) running: mount | grep -F /mnt/cdrom > //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.tmp 2> //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 [Main] libmondo-devices.c->mount_media#1387: Mounting for Network thingy [Main] libmondo-devices.c->mount_media#1388: isodir = /tmp/isodir [Main] libmondo-devices.c->mount_media#1449: (mount_media) --- command = mount /tmp/isodir///nessus-apac1-1.iso -t iso9660 -o loop,ro /mnt/cdrom running: mount /tmp/isodir///nessus-apac1-1.iso -t iso9660 -o loop,ro /mnt/cdrom > //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.tmp 2> //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-devices.c->mount_media#1464: Mounted media drive OK [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2157: gcffa --- managed to mount CD; so, no need for Plan B [Main] libmondo-devices.c->is_this_device_mounted#1138: Is /mnt/cdrom mounted? [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2212: gcffa --- Plan B, a.k.a. untarring some file from all.tar.gz running: tar -zxvf /mnt/cdrom/images/all.tar.gz ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm > //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.tmp 2> //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.err --------------------------------start of output----------------------------- ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/mountlist.txt ./tmp/i-want-my-lvm --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2228: gcffa --- great! We've got the config file [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2233: cp -f /mondo.tmp.Hc8f3Q/tmp/mondo-restore.cfg //mondo.tmp.Hc8f3Q/tmp/mondo-restore.cfg running: cp -f /mondo.tmp.Hc8f3Q/tmp/mondo-restore.cfg //mondo.tmp.Hc8f3Q/tmp/mondo-restore.cfg > //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.tmp 2> //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.err --------------------------------start of output----------------------------- cp: '/mondo.tmp.Hc8f3Q/tmp/mondo-restore.cfg' and '//mondo.tmp.Hc8f3Q/tmp/mondo-restore.cfg' are the same file --------------------------------end of output------------------------------ ...ran with res=256 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2238: ... but an error occurred when I tried to move it to //mondo.tmp.Hc8f3Q/tmp/mondo-restore.cfg [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2245: cp -f /mondo.tmp.Hc8f3Q/tmp/mountlist.txt //mondo.tmp.Hc8f3Q/tmp/mountlist.txt running: umount -d /mnt/cdrom > //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.tmp 2> //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) Recovered mondo-restore.cfg running: cp -f //mondo.tmp.Hc8f3Q/tmp/mondo-restore.cfg /tmp/mondo-restore.cfg > //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.tmp 2> //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: cp -f etc/raidtab /etc/ > //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.tmp 2> //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.err --------------------------------start of output----------------------------- cp: can't stat 'etc/raidtab': No such file or directory --------------------------------end of output------------------------------ ...ran with res=256 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#765: Backup medium is CD-R[W] [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#804: Internal tape block size has been custom-set to 32768 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#843: differential var = '0' [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#847: This is a regular (full) backup [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#871: netfs_mount is 155.161.44.146:/var/syslog/mondo/nessus-apac1 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#872: netfs_proto is nfs [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#876: netfs_remote_dir is / [Main] mondorestore.c->interactive_mode#471: Done loading config file; resizing ML [Main] mondo-prep.c->resize_mountlist_proportionately_to_suit_new_drives#2621: Resizing mountlist [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] mondo-prep.c->resize_mountlist_proportionately_to_suit_new_drives#2623: Back from MLoDiM [Main] libmondo-devices.c->get_phys_size_of_drive#1040: /dev/cciss/c0d0 --> -1 or 139979 --> 139979 Expanding entries to suit drive /dev/cciss/c0d0 (139979 MB) [Main] mondo-prep.c->create_mountlist_for_drive#2653: Creating list of partitions for drive /dev/cciss/c0d0 Disk /dev/cciss/c0d0 was 139979 MB; is now 139979 MB; Proportionally resizing partitions (factor ~= 1) Changing /dev/cciss/c0d0p3 from 0 KB to 0 KB Changing /dev/cciss/c0d0p1 from 0 KB to 0 KB Changing /dev/cciss/c0d0p2 from 143338496 KB to 143338496 KB final_size = 139979 MB Mountlist adjusted to suit current hard drive(s) [Main] mondorestore.c->interactive_mode#488: About to edit mountlist [Main] mondo-rstr-newt.c->edit_mountlist#2090: entering eml [Main] mondo-rstr-newt.c->edit_mountlist#2096: I'm in GUI mode, so I shall edit mountlist using edit_mountlist() [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1040: /dev/cciss/c0d0 --> -1 or 139979 --> 139979 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/cciss/c0d0 is 139979 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/cciss/c0d0p1 on /dev/cciss/c0d0 #5 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#476: /dev/cciss/c0d0p1 is tiny! [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/cciss/c0d0p2 on /dev/cciss/c0d0 #6 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/cciss/c0d0p3 on /dev/cciss/c0d0 #0 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: /dev/cciss/c0d0p1 is tiny! [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1040: /dev/cciss/c0d0 --> -1 or 139979 --> 139979 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/cciss/c0d0 is 139979 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/cciss/c0d0p1 on /dev/cciss/c0d0 #5 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#476: /dev/cciss/c0d0p1 is tiny! [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/cciss/c0d0p2 on /dev/cciss/c0d0 #6 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/cciss/c0d0p3 on /dev/cciss/c0d0 #0 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: /dev/cciss/c0d0p1 is tiny! [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1040: /dev/cciss/c0d0 --> -1 or 139979 --> 139979 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/cciss/c0d0 is 139979 MB [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/cciss/c0d0p1 on /dev/cciss/c0d0 #5 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#476: /dev/cciss/c0d0p1 is tiny! [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/cciss/c0d0p2 on /dev/cciss/c0d0 #6 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/cciss/c0d0p3 on /dev/cciss/c0d0 #0 in mountlist Found MBR partition table format type [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: /dev/cciss/c0d0p1 is tiny! [Main] mondo-rstr-newt.c->edit_mountlist#2099: leaving eml [Main] mondorestore.c->interactive_mode#497: Finished editing mountlist running: umount -d /mnt/cdrom > //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.tmp 2> //mondo.tmp.Hc8f3Q/mondo-run-prog-thing.err --------------------------------start of output----------------------------- umount: can't umount /mnt/cdrom: Invalid argument --------------------------------end of output------------------------------ ...ran with res=256 [Main] ../common/newt-specific.c->finish#420: Calling newtFinished()