08:01 Extracted additional /dev entries OK. 08:01 Engaging /proc/driver/cciss/cciss0 08:01 ...result=0 08:01 Trying 'mount /dev/shm -t tmpfs -o size=64m' 08:01 Great. Pivot succeeded w/ size=64m 08:01 Successfully mounted dynamic /tmp ramdisk 08:01 find-and-mount-cdrom --- starting 08:01 Trying /dev/hda 08:01 It's not in /dev/hda; I'll keep looking 08:01 Trying /dev/hdb 08:01 It's not in /dev/hdb; I'll keep looking 08:01 Trying /dev/hdc 08:01 It's not in /dev/hdc; I'll keep looking 08:01 Trying /dev/hdd 08:01 It's not in /dev/hdd; I'll keep looking 08:01 Trying /dev/hde 08:01 It's not in /dev/hde; I'll keep looking 08:01 Trying /dev/hdf 08:01 It's not in /dev/hdf; I'll keep looking 08:01 Trying /dev/hdg 08:01 It's not in /dev/hdg; I'll keep looking 08:01 Trying /dev/hdh 08:01 It's not in /dev/hdh; I'll keep looking 08:01 Trying /dev/scd0 08:01 /dev/scd0 has a CD-ROM in it 08:01 CD-ROM found at /dev/scd0 08:01 /dev/scd0 is where the Mondo CD lives. 08:01 CD-ROM found and mounted at /dev/scd0 08:01 find-and-mount-cdrom --- leaving (0) 08:01 OK, I am running on a CD-ROM. Good. 08:01 Starting install-additional-tools 08:01 PLEASE WAIT. Untarring data content 08:01 Populating / with tar file content... 08:01 Done. 08:01 Exiting install-additional-tools 08:01 klogd and syslogd have been started. 08:01 RAID controller(s) detected. Pausing 10 seconds to let them warm up. 08:01 Running 'mdadm' 08:01 Scanning LVM's... 08:02 LVM's have been started. 08:02 OK, we've found /mnt/cdrom/archives/*; great. 08:02 Re-jigging mondo-restore.cfg because you backed up to ISOs and then burned them to CDs 08:02 Done re-jigging. Yay. 08:02 init (from mindi v2.0.6-r2153) 08:02 /proc/cmdline is: initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=81920 nuke devfs=nomount noresume selinux=0 barrier=off ramdisk_blocksize=1024 BOOT_IMAGE=/vmlinuz denymods=fdomain 08:02 df result: 08:02 ---------- Filesystem 1K-blocks Used Available Use% Mounted on rootfs 76767 39496 36452 53% / /dev/root 76767 39496 36452 53% / none 5120 84 5036 2% /dev none 16481572 0 16481572 0% /dev/shm /dev/shm 65536 708 64828 2% /tmp /dev/scd0 1107848 1107848 0 100% /mnt/cdrom 08:02 ------------- 08:02 mount result: 08:02 ------------- rootfs on / type rootfs (rw) /dev/root on / type ext2 (rw,nogrpid) /proc/ on /proc type proc (rw) /sys/ on /sys type sysfs (rw) none on /dev type tmpfs (rw) none on /dev/pts type devpts (rw) none on /dev/shm type tmpfs (rw) /dev/shm on /tmp type tmpfs (rw) /dev/scd0 on /mnt/cdrom type iso9660 (ro) 08:02 ------------- 08:02 lsmod result: 08:02 ------------- Module Size Used by crc16 18816 0 msdos 27136 0 vfat 30336 0 fat 69552 2 msdos,vfat nfsd 270216 0 ext3 153360 0 jbd 84544 1 ext3 jfs 181328 0 xfs 540616 0 reiserfs 247040 0 fuse 63024 0 iptable_filter 19712 0 ip_tables 31048 1 iptable_filter x_tables 31112 1 ip_tables joydev 27520 0 raw 24848 0 ipmi_devintf 27024 0 ipmi_msghandler 47476 1 ipmi_devintf hw_random 22568 0 shpchp 61984 0 pci_hotplug 44800 1 shpchp linear 21888 0 raid0 24064 0 raid1 39808 0 raid10 38912 0 raid5 41856 0 xor 22416 1 raid5 dm_snapshot 34248 0 dm_zero 18816 0 dm_mirror 43392 0 dm_round_robin 20096 1 dm_emc 23168 0 dm_hp_sw 20224 0 dm_rdac 24832 0 dm_multipath 42512 5 dm_round_robin,dm_emc,dm_hp_sw,dm_rdac dm_mod 80400 13 dm_snapshot,dm_zero,dm_mirror,dm_multipath multipath 25216 0 bonding 102144 0 button 24352 0 battery 27528 0 ac 22152 0 fan 21896 0 thermal 32400 0 processor 53100 1 thermal piix 28164 0 [permanent] nls_utf8 18688 1 nls_cp437 23552 0 nls_iso8859_1 21760 0 exportfs 22400 1 nfsd nfs 234296 0 lockd 89456 2 nfsd,nfs nfs_acl 20224 2 nfsd,nfs af_packet 56460 0 sunrpc 174024 4 nfsd,nfs,lockd,nfs_acl intermodule 20868 0 forcedeth 43780 0 8139too 45184 0 8139cp 40832 0 pcnet32 48260 0 libphy 35968 0 tg3 132996 0 ne2k_pci 28768 0 8390 27136 1 ne2k_pci eepro100 50192 0 e1000 211528 0 bnx2 201736 0 e100 54416 0 3c59x 64308 0 mii 22400 6 8139too,8139cp,pcnet32,eepro100,e100,3c59x raw1394 43160 0 ieee1394 120056 1 raw1394 mptctl 47112 0 mptfc 35976 0 mptspi 38416 0 mptsas 52112 0 mptscsih 54400 3 mptfc,mptspi,mptsas mptbase 95204 5 mptctl,mptfc,mptspi,mptsas,mptscsih i2o_block 30240 0 i2o_core 62520 1 i2o_block ohci_hcd 38148 0 ehci_hcd 49288 0 uhci_hcd 49440 0 usb_storage 101440 0 dock 26896 0 sata_promise 32004 0 pata_marvell 24320 0 sata_nv 38408 0 ahci 46216 0 ata_piix 34308 1 libata 145832 5 sata_promise,pata_marvell,sata_nv,ahci,ata_piix edd 26760 0 loop 33168 0 cciss 87944 2 serverworks 25488 0 [permanent] sis5513 30352 0 [permanent] amd74xx 31920 0 [permanent] cmd64x 27596 0 [permanent] generic 21892 0 [permanent] via82cxxx 25348 0 [permanent] pcmcia_core 59300 0 ide_cd 57760 0 ide_disk 32768 0 ide_floppy 34304 0 ide_tape 51904 0 tmscsim 38080 0 sym53c8xx 91428 0 sr_mod 33060 1 cdrom 52520 2 ide_cd,sr_mod sg 53304 0 sd_mod 37760 0 scsi_transport_sas 49536 1 mptsas qlogicfas408 24192 0 scsi_transport_fc 57356 1 mptfc qla1280 134672 0 megaraid_sas 55228 0 megaraid_mbox 49424 0 megaraid_mm 28216 1 megaraid_mbox megaraid 57160 0 iscsi_tcp 38276 0 libiscsi 47488 1 iscsi_tcp scsi_transport_iscsi 51480 2 iscsi_tcp,libiscsi ide_scsi 34568 0 ide_core 166148 13 piix,usb_storage,serverworks,sis5513,amd74xx,cmd64x,generic,via82cxxx,ide_cd,ide_disk,ide_floppy,ide_tape,ide_scsi dmx3191d 29184 0 BusLogic 41280 0 atp870u 45056 0 aic7xxx 176184 0 aic79xx 254552 0 scsi_transport_spi 43136 5 mptspi,sym53c8xx,dmx3191d,aic7xxx,aic79xx aacraid 84612 0 3w_9xxx 51076 0 3w_xxxx 43552 0 osst 68400 0 st 55204 0 scsi_mod 170936 37 dm_hp_sw,dm_rdac,mptctl,mptfc,mptspi,mptsas,mptscsih,usb_storage,ahci,libata,cciss,tmscsim,sym53c8xx,sr_mod,sg,sd_mod,scsi_transport_sas,scsi_transport_fc,qla1280,megaraid_sas,megaraid_mbox,megaraid,iscsi_tcp,libiscsi,scsi_transport_iscsi,ide_scsi,dmx3191d,BusLogic,atp870u,aic7xxx,aic79xx,scsi_transport_spi,aacraid,3w_9xxx,3w_xxxx,osst,st usbhid 61088 0 usbcore 150312 6 ohci_hcd,ehci_hcd,uhci_hcd,usb_storage,usbhid 08:02 ------------- 08:02 dmesg result: 08:02 ------------- imm: Unknown symbol parport_register_device imm: Unknown symbol parport_register_driver imm: Unknown symbol parport_release imm: Unknown symbol parport_claim imm: Unknown symbol parport_unregister_device imm: Unknown symbol parport_unregister_driver initio: module not supported by Novell, setting U taint flag. Loading iSCSI transport class v2.0-724. iscsi: registered transport (tcp) megaraid cmm: 2.20.2.8 (Release Date: Tue Dec 18 12:12:25 PST 2007) megaraid: 2.20.5.2 (Release Date: Tue Dec 18 12:12:25 PST 2007) megasas: 00.00.03.15-SL1 Thu Nov. 01 13:32:21 PDT 2007 ppa: Unknown symbol parport_register_device ppa: Unknown symbol parport_register_driver ppa: Unknown symbol parport_release ppa: Unknown symbol parport_claim ppa: Unknown symbol parport_unregister_device ppa: Unknown symbol parport_unregister_driver qla2xxx: Unknown symbol release_firmware qla2xxx: Unknown symbol request_firmware ide_tape: module not supported by Novell, setting U taint flag. ide-floppy driver 0.99.newide pcmcia: Unknown symbol release_firmware pcmcia: Unknown symbol request_firmware ide_cs: Unknown symbol cs_error ide_cs: Unknown symbol pcmcia_get_first_tuple ide_cs: Unknown symbol pcmcia_unregister_driver ide_cs: Unknown symbol pcmcia_get_tuple_data ide_cs: Unknown symbol pcmcia_get_next_tuple ide_cs: Unknown symbol pcmcia_get_configuration_info ide_cs: Unknown symbol pcmcia_request_io ide_cs: Unknown symbol pcmcia_request_configuration ide_cs: Unknown symbol pcmcia_release_configuration ide_cs: Unknown symbol pcmcia_parse_tuple ide_cs: Unknown symbol pcmcia_release_io ide_cs: Unknown symbol pcmcia_register_driver ide_cs: Unknown symbol pcmcia_release_irq ide_cs: Unknown symbol pcmcia_request_irq Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found paride: module not supported by Novell, setting U taint flag. paride: Unknown symbol parport_register_device paride: Unknown symbol parport_release paride: Unknown symbol parport_claim paride: Unknown symbol parport_unregister_device paride: Unknown symbol parport_find_base paride: Unknown symbol parport_put_port cciss: module not supported by Novell, setting U taint flag. HP CISS Driver (v 3.6.18-17) cciss: Device 0x3230 has been found at bus 6 dev 0 func 0 ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 169 cciss/c0d0: p1 p2 p3 cciss/c0d1: p1 loop: loaded (max 8 devices) BIOS EDD facility v0.16 2004-Jun-25, 2 devices found libata version 2.00 loaded. ata_piix 0000:00:1f.1: version 2.00ac7 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0x500 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15 scsi0 : ata_piix ata1.00: ATAPI, max UDMA/33 ata1.00: configured for UDMA/33 scsi1 : ata_piix ATA: abnormal status 0x7F on port 0x177 Vendor: TEAC Model: DW-224E-V Rev: C.CC Type: CD-ROM ANSI SCSI revision: 05 sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sr 0:0:0:0: Attached scsi generic sg0 type 5 No dock devices found. Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001000 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.16.60-0.21-smp uhci_hcd usb usb1: SerialNumber: 0000:00:1d.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 177, io base 0x00001020 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.16.60-0.21-smp uhci_hcd usb usb2: SerialNumber: 0000:00:1d.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 185, io base 0x00001040 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.16.60-0.21-smp uhci_hcd usb usb3: SerialNumber: 0000:00:1d.2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected GSI 19 sharing vector 0x72 and IRQ 19 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 114 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 114, io base 0x00001060 usb usb4: new device found, idVendor=0000, idProduct=0000 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.16.60-0.21-smp uhci_hcd usb usb4: SerialNumber: 0000:00:1d.3 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected GSI 20 sharing vector 0x7A and IRQ 20 ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 22 (level, low) -> IRQ 122 uhci_hcd 0000:01:04.4: UHCI Host Controller uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 5 uhci_hcd 0000:01:04.4: irq 122, io base 0x00003800 usb usb5: new device found, idVendor=0000, idProduct=0000 usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.16.60-0.21-smp uhci_hcd usb usb5: SerialNumber: 0000:01:04.4 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:1d.7: irq 169, io mem 0xf7df0000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: new device found, idVendor=0000, idProduct=0000 usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: EHCI Host Controller usb usb6: Manufacturer: Linux 2.6.16.60-0.21-smp ehci_hcd usb usb6: SerialNumber: 0000:00:1d.7 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 8 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) yenta_socket: Unknown symbol pccard_nonstatic_ops pcmcia: Unknown symbol release_firmware pcmcia: Unknown symbol request_firmware I2O subsystem v1.325 i2o: max drivers = 8 i2o_block: module not supported by Novell, setting U taint flag. I2O Block Device OSM v1.325 block-osm: registered device at major 80 Fusion MPT base driver 3.04.06-suse Copyright (c) 1999-2007 LSI Corporation Fusion MPT SAS Host driver 3.04.06-suse Fusion MPT SPI Host driver 3.04.06-suse Fusion MPT FC Host driver 3.04.06-suse Fusion MPT misc device (ioctl) driver 3.04.06-suse mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=10,220) ieee1394: Initialized config rom entry `ip1394' ieee1394: raw1394: /dev/raw1394 device initialized e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.6.7c (November 15, 2007) ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 185 usb 5-1: new full speed USB device using uhci_hcd and address 2 usb 5-1: new device found, idVendor=03f0, idProduct=1027 usb 5-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1: Product: Virtual Keyboard usb 5-1: Manufacturer: HP usb 5-1: configuration #1 chosen from 1 choice input: HP Virtual Keyboard as /class/input/input3 input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1 input: HP Virtual Keyboard as /class/input/input4 input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1 usb 5-2: new full speed USB device using uhci_hcd and address 3 eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 185, node addr 0022649836ac ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 114 usb 5-2: new device found, idVendor=03f0, idProduct=1327 usb 5-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-2: Product: Virtual Hub usb 5-2: Manufacturer: HP usb 5-2: configuration #1 chosen from 1 choice hub 5-2:1.0: USB hub found hub 5-2:1.0: 7 ports detected eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 114, node addr 00226498365e Intel(R) PRO/1000 Network Driver - version 7.6.9.1-NAPI Copyright (c) 1999-2007 Intel Corporation. eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html Generic PHY: Registered new driver pcnet32.c:v1.31c 01.Nov.2005 tsbogend@alpha.franken.de 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) 8139too Fast Ethernet driver 0.9.27 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.49. NET: Registered protocol family 17 cciss0: No device changes detected. cciss0: No appropriate SCSI device detected, SCSI subsystem not engaged. ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A GDT-HA: Storage RAID Controller Driver. Version: 3.05 GDT-HA: Found 0 PCI Storage RAID Controllers imm: Unknown symbol parport_register_device imm: Unknown symbol parport_register_driver imm: Unknown symbol parport_release imm: Unknown symbol parport_claim imm: Unknown symbol parport_unregister_device imm: Unknown symbol parport_unregister_driver initio: module not supported by Novell, setting U taint flag. ppa: Unknown symbol parport_register_device ppa: Unknown symbol parport_register_driver ppa: Unknown symbol parport_release ppa: Unknown symbol parport_claim ppa: Unknown symbol parport_unregister_device ppa: Unknown symbol parport_unregister_driver qla2xxx: Unknown symbol release_firmware qla2xxx: Unknown symbol request_firmware pcmcia: Unknown symbol release_firmware pcmcia: Unknown symbol request_firmware ide_cs: Unknown symbol cs_error ide_cs: Unknown symbol pcmcia_get_first_tuple ide_cs: Unknown symbol pcmcia_unregister_driver ide_cs: Unknown symbol pcmcia_get_tuple_data ide_cs: Unknown symbol pcmcia_get_next_tuple ide_cs: Unknown symbol pcmcia_get_configuration_info ide_cs: Unknown symbol pcmcia_request_io ide_cs: Unknown symbol pcmcia_request_configuration ide_cs: Unknown symbol pcmcia_release_configuration ide_cs: Unknown symbol pcmcia_parse_tuple ide_cs: Unknown symbol pcmcia_release_io ide_cs: Unknown symbol pcmcia_register_driver ide_cs: Unknown symbol pcmcia_release_irq ide_cs: Unknown symbol pcmcia_request_irq Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found paride: module not supported by Novell, setting U taint flag. paride: Unknown symbol parport_register_device paride: Unknown symbol parport_release paride: Unknown symbol parport_claim paride: Unknown symbol parport_unregister_device paride: Unknown symbol parport_find_base paride: Unknown symbol parport_put_port ACPI Error (psargs-0353): [CS03] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0517): Method parse/execution failed [\_PR_.CPU0._CST] (Node ffff81080b384cc0), AE_NOT_FOUND ACPI Error (psargs-0353): [CS03] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0517): Method parse/execution failed [\_PR_.CPU1._CST] (Node ffff81080b384f80), AE_NOT_FOUND ACPI Error (psargs-0353): [CS03] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0517): Method parse/execution failed [\_PR_.CPU2._CST] (Node ffff81080b384dc0), AE_NOT_FOUND ACPI Error (psargs-0353): [CS03] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0517): Method parse/execution failed [\_PR_.CPU3._CST] (Node ffff81080b384c80), AE_NOT_FOUND Hotpluggable processor device is not present Hotpluggable processor device is not present Hotpluggable processor device is not present Hotpluggable processor device is not present ACPI: Thermal Zone [THM0] (8 C) ACPI: Power Button (FF) [PWRF] yenta_socket: Unknown symbol pccard_nonstatic_ops pcmcia: Unknown symbol release_firmware pcmcia: Unknown symbol request_firmware Ethernet Channel Bonding Driver: v3.0.3 (March 23, 2006) bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. multipath: module not supported by Novell, setting U taint flag. md: multipath personality registered for level -4 device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com dm-netlink version 0.0.2 loaded device-mapper: multipath: version 1.0.4 loaded device-mapper: multipath rdac: rdac: version 0.6 loaded device-mapper: multipath hp-sw: version 1.0.0 loaded device-mapper: multipath emc: version 0.0.4 loaded device-mapper: multipath round-robin: version 1.0.0 loaded raid5: automatically using best checksumming function: generic_sse generic_sse: 7440.000 MB/sec raid5: using function: generic_sse (7440.000 MB/sec) md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: raid10 personality registered for level 10 md: raid1 personality registered for level 1 md: raid0 personality registered for level 0 md: linear personality registered for level -1 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 hw_random hardware driver 1.0.0 loaded ipmi message handler version 38.2 ipmi device interface IPMI System Interface driver. ipmi_si: ACPI/SPMI specifies "kcs" I/O SI @ 0xca2 ipmi_si: Unable to find any System Interface(s) ip_tables: (C) 2000-2006 Netfilter Core Team fuse init (API version 7.8) SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled JFS: nTxBlock = 8192, nTxLock = 65536 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 08:02 ------------- 08:02 /proc/swaps: 08:02 ------------- 08:02 ------------- 08:02 /proc/filesystems: 08:02 ------------- nodev sysfs nodev rootfs nodev bdev nodev proc nodev cpuset nodev debugfs nodev securityfs nodev sockfs nodev pipefs nodev futexfs nodev tmpfs nodev inotifyfs nodev eventpollfs nodev devpts ext2 nodev ramfs nodev hugetlbfs minix iso9660 nodev mqueue nodev usbfs nodev rpc_pipefs nodev nfs nodev nfs4 nodev fuse fuseblk nodev fusectl reiserfs xfs jfs ext3 nodev nfsd vfat msdos 08:02 ------------- 08:02 /proc/partitions: 08:02 ------------- major minor #blocks name 104 0 143338560 cciss/c0d0 104 1 8401963 cciss/c0d0p1 104 2 31471335 cciss/c0d0p2 104 3 103458600 cciss/c0d0p3 104 16 143338560 cciss/c0d1 104 17 143331898 cciss/c0d1p1 253 0 143338560 dm-0 253 1 143338560 dm-1 253 2 8401963 dm-2 253 3 31471335 dm-3 253 4 103458600 dm-4 253 5 143331898 dm-5 08:02 backup-media-type is specified in config file - great. 08:02 Calling post-init Here is my /tmp/mountlist.txt /dev/cciss/c0d0p3 lvm lvm 103474665 /dev/cciss/c0d0p2 / ext3 31463302 /dev/cciss/c0d1p1 /data ext3 143331898 /dev/system/home /home ext3 lvm /dev/system/opt /opt ext3 lvm /dev/system/tftpboot /tftpboot ext3 lvm /dev/system/tmp /tmp ext3 lvm /dev/system/usr /usr ext3 lvm /dev/system/var /var ext3 lvm /dev/cciss/c0d0p1 swap swap 8393920 08:02 mondorestore found; cool... 08:02 mount-me found 08:02 unmount-me found 08:02 mondorestore found 08:02 -------------------NUKE MODE------------------- [TH=6594] libmondo-tools.c->reset_bkpinfo#856: Hi root is mounted at /dev/root No, Schlomo, that doesn't mean /dev/root is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [TH=6594] libmondo-devices.c->am_I_in_disaster_recovery_mode#147: Is this a ramdisk? result = 1 [TH=6594] libmondo-devices.c->sensibly_set_tmpdir_and_scratchdir#2219: bkpinfo->tmpdir is being set to //mondo.tmp.Bi9q74 [TH=6594] libmondo-devices.c->sensibly_set_tmpdir_and_scratchdir#2223: bkpinfo->scratchdir is being set to //mondo.scratch.17767 running: mkdir -p /mnt/cdrom > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) root is mounted at /dev/root No, Schlomo, that doesn't mean /dev/root is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [TH=6594] libmondo-devices.c->am_I_in_disaster_recovery_mode#147: Is this a ramdisk? result = 1 running: mount / -o remount,rw > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-tools.c->get_kernel_version#262: g_kernel_version = 2.616000 [Main] mondorestore.c->main#2895: FYI - g_mountlist_fname = /tmp/mountlist.txt running: cp -f /tmp/mountlist.txt /tmp/mountlist.txt.orig > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: umount /mnt/cdrom > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: rm -Rf /tmp/tmpfs/mondo.tmp.* > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) -------------- Mondo Restore v2.2.8-r2153 ------------- DON'T PANIC! Mondorestore logs almost everything, so please don't break out in a cold sweat just because you see a few error messages in the log. Read them; analyze them; see if they are significant; above all, verify your backups! Please attach a compressed copy of this log to any e-mail you send to the Mondo mailing list when you are seeking technical support. Without it, we can't help you. - DevTeam ------------------------------------------------------------ BTW, despite (or perhaps because of) the wealth of messages, some users are inclined to stop reading this log. If Mondo stopped for some reason, chances are it's detailed here. More than likely there's a message at the very end of this log that will tell you what is wrong. Please read it! ------------------------------------------------------------ [Main] mondorestore.c->main#2931: I am in disaster recovery mode [Main] mondorestore.c->main#2936: mondorestore.c, main, 47120086207352: what time is it [Main] libmondo-files.c->find_home_of_exe#359: find_home_of_exe () --- Found afio at /usr/bin/afio running: which mkfs.vfat > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- /sbin/mkfs.vfat --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-cli.c->handle_incoming_parameters#115: Switches:- [Main] libmondo-cli.c->handle_incoming_parameters#119: -Z nuke [Main] mondorestore.c->main#3117: I must be in disaster recovery mode. [Main] mondorestore.c->main#3118: FYI, MOUNTLIST_FNAME = /tmp/mountlist.txt [Main] mondorestore.c->main#3120: mondorestore.c, main, 47120086207536: About to call load_mountlist and load_raidtab [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#885: Backup medium is CD-R[W] [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#924: Internal tape block size has been custom-set to 32768 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#963: differential var = '0' [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#967: This is a regular (full) backup [Main] libmondo-mountlist.c->load_mountlist#898: Loading mountlist... [Main] libmondo-mountlist.c->load_mountlist#969: /dev/cciss/c0d0p3 lvm lvm 103474665 [Main] libmondo-mountlist.c->load_mountlist#969: /dev/cciss/c0d0p2 / ext3 31463302 [Main] libmondo-mountlist.c->load_mountlist#969: /dev/cciss/c0d1p1 /data ext3 143331898 [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/home /home ext3 0 [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/opt /opt ext3 0 [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/tftpboot /tftpboot ext3 0 [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/tmp /tmp ext3 0 [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/usr /usr ext3 0 [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/var /var ext3 0 [Main] libmondo-mountlist.c->load_mountlist#969: /dev/cciss/c0d0p1 swap swap 8393920 [Main] libmondo-mountlist.c->load_mountlist#977: Mountlist loaded successfully. [Main] libmondo-mountlist.c->load_mountlist#979: 10 entries in mountlist [Main] libmondo-files.c->length_of_file#536: filename=/etc/raidtab Unable to openin filename (No such file or directory) [Main] libmondo-raid.c->load_raidtab_into_raidlist#647: Raidtab is very small or non-existent. Ignoring it. [Main] mondorestore.c->main#3126: mondorestore.c, main, 47120086207542: Returned from calling load_mountlist and load_raidtab successfully [Main] mondorestore.c->main#3146: Send in the clowns. [Main] mondorestore.c->main#3150: mondorestore.c, main, 47120086207566: nuking [Main] mondorestore.c->nuke_mode#784: nuke_mode --- starting [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2221: gcffa --- starting I'm thinking... running: mkdir -p //mondo.tmp.Bi9q74/mount.bootdisk > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2237: mountpt = //mondo.tmp.Bi9q74/mount.bootdisk; cfg_file=//mondo.tmp.Bi9q74/tmp/mondo-restore.cfg [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2240: gcffa --- we don't have cfg file yet. [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2244: gcffa --- calling mount_media now :) running: mount | grep -F /mnt/cdrom > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 [Main] mondo-rstr-tools.c->mount_media#681: (mount_media) --- command = mount /dev/cdrom -t iso9660 -o ro /mnt/cdrom running: mount /dev/cdrom -t iso9660 -o ro /mnt/cdrom > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->mount_media#696: Mounted media drive OK [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2247: gcffa --- managed to mount CD; so, no need for Plan B [Main] libmondo-devices.c->is_this_device_mounted#1130: Is /mnt/cdrom mounted? [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2302: gcffa --- Plan B, a.k.a. untarring some file from all.tar.gz running: tar -zxvf /mnt/cdrom/images/all.tar.gz ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- ./tmp/mondo-restore.cfg ./tmp/mountlist.txt ./tmp/i-want-my-lvm ./tmp/filelist.full.gz ./tmp/biggielist.txt --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2318: gcffa --- great! We've got the config file [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2323: mondo-rstr-tools.c, get_cfg_file_from_archive, 2323: cp -f /mondo.tmp.Bi9q74/tmp/mondo-restore.cfg //mondo.tmp.Bi9q74/tmp/mondo-restore.cfg running: cp -f /mondo.tmp.Bi9q74/tmp/mondo-restore.cfg //mondo.tmp.Bi9q74/tmp/mondo-restore.cfg > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- cp: '/mondo.tmp.Bi9q74/tmp/mondo-restore.cfg' and '//mondo.tmp.Bi9q74/tmp/mondo-restore.cfg' are the same file --------------------------------end of output------------------------------ ...ran with res=256 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2328: ... but an error occurred when I tried to move it to //mondo.tmp.Bi9q74/tmp/mondo-restore.cfg [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2335: mondo-rstr-tools.c, get_cfg_file_from_archive, 2335: cp -f /mondo.tmp.Bi9q74/tmp/mountlist.txt //mondo.tmp.Bi9q74/tmp/mountlist.txt running: umount /mnt/cdrom > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) Recovered mondo-restore.cfg running: cp -f //mondo.tmp.Bi9q74/tmp/mondo-restore.cfg /tmp/mondo-restore.cfg > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: cp -f etc/raidtab /etc/ > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- cp: cannot stat 'etc/raidtab': No such file or directory --------------------------------end of output------------------------------ ...ran with res=256 [Main] libmondo-mountlist.c->load_mountlist#898: Loading mountlist... [Main] libmondo-mountlist.c->load_mountlist#969: /dev/cciss/c0d0p3 lvm lvm 103474665 [Main] libmondo-mountlist.c->load_mountlist#969: /dev/cciss/c0d0p2 / ext3 31463302 [Main] libmondo-mountlist.c->load_mountlist#969: /dev/cciss/c0d1p1 /data ext3 143331898 [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/home /home ext3 0 [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/opt /opt ext3 0 [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/tftpboot /tftpboot ext3 0 [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/tmp /tmp ext3 0 [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/usr /usr ext3 0 [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/var /var ext3 0 [Main] libmondo-mountlist.c->load_mountlist#969: /dev/cciss/c0d0p1 swap swap 8393920 [Main] libmondo-mountlist.c->load_mountlist#977: Mountlist loaded successfully. [Main] libmondo-mountlist.c->load_mountlist#979: 10 entries in mountlist [Main] mondo-prep.c->resize_mountlist_proportionately_to_suit_new_drives#2585: mondo-prep.c, resize_mountlist_proportionately_to_suit_new_drives, 47120086207001: Resizing mountlist [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#726: Making list of drives [Main] mondo-prep.c->resize_mountlist_proportionately_to_suit_new_drives#2587: mondo-prep.c, resize_mountlist_proportionately_to_suit_new_drives, 47120086207003: Back from MLoDiM [Main] libmondo-devices.c->get_phys_size_of_drive#1029: /dev/cciss/c0d0 --> -1 or 139979 --> 139979 Expanding entries to suit drive /dev/cciss/c0d0 (139979 MB) [Main] mondo-prep.c->create_mountlist_for_drive#2617: Creating list of partitions for drive /dev/cciss/c0d0 Disk /dev/cciss/c0d0 was 139971 MB; is now 139979 MB; factor = 1.000057 Changing /dev/cciss/c0d0p3 from 103474665 KB to 103480576 KB Changing /dev/cciss/c0d0p2 from 31463302 KB to 31465098 KB Changing /dev/cciss/c0d0p1 from 8393920 KB to 8394399 KB [Main] libmondo-devices.c->get_phys_size_of_drive#1029: /dev/cciss/c0d0 --> -1 or 139979 --> 139979 final_size = 139979 MB [Main] libmondo-devices.c->get_phys_size_of_drive#1029: /dev/cciss/c0d1 --> -1 or 139979 --> 139979 Expanding entries to suit drive /dev/cciss/c0d1 (139979 MB) [Main] mondo-prep.c->create_mountlist_for_drive#2617: Creating list of partitions for drive /dev/cciss/c0d1 Disk /dev/cciss/c0d1 was 139972 MB; is now 139979 MB; factor = 1.000050 Changing /dev/cciss/c0d1p1 from 143331898 KB to 143339088 KB [Main] libmondo-devices.c->get_phys_size_of_drive#1029: /dev/cciss/c0d1 --> -1 or 139979 --> 139979 final_size = 139979 MB Mountlist adjusted to suit current hard drive(s) [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#726: Making list of drives [Main] libmondo-mountlist.c->evaluate_mountlist#530: Evaluating mountlist... [Main] libmondo-devices.c->get_phys_size_of_drive#1029: /dev/cciss/c0d0 --> -1 or 139979 --> 139979 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#383: /dev/cciss/c0d0 is 139979 MB Looking for partition table format type [Main] libmondo-devices.c->which_partition_format#2647: Using /sbin/parted2fdisk Found MBR partition table format type Looking for partition table format type [Main] libmondo-devices.c->which_partition_format#2647: Using /sbin/parted2fdisk Found MBR partition table format type Looking for partition table format type [Main] libmondo-devices.c->which_partition_format#2647: Using /sbin/parted2fdisk Found MBR partition table format type [Main] libmondo-devices.c->get_phys_size_of_drive#1029: /dev/cciss/c0d1 --> -1 or 139979 --> 139979 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#383: /dev/cciss/c0d1 is 139979 MB Looking for partition table format type [Main] libmondo-devices.c->which_partition_format#2647: Using /sbin/parted2fdisk Found MBR partition table format type [Main] libmondo-mountlist.c->save_mountlist_to_disk#1003: save_mountlist_to_disk() --- saving to /tmp/mountlist.txt Restoring Automatically [Main] mondo-prep.c->partition_everything#1954: partition_everything() --- starting Partitioning hard drives Stopping all LVMs, just in case [Main] mondo-prep.c->do_my_funky_lvm_stuff#254: mondo-prep.c, do_my_funky_lvm_stuff, 254: STARTING [Main] mondo-prep.c->do_my_funky_lvm_stuff#255: OK, opened i-want-my-lvm. Shutting down LVM volumes... [Main] libmondo-files.c->find_home_of_exe#359: find_home_of_exe () --- Found lvm at /sbin/lvm [Main] mondo-prep.c->do_my_funky_lvm_stuff#283: Closed i-want-my-lvm. Finished erasing LVMs. [Main] mondo-prep.c->do_my_funky_lvm_stuff#431: mondo-prep.c, do_my_funky_lvm_stuff, 431: ENDING [Main] mondo-prep.c->do_my_funky_lvm_stuff#436: Not many errors. Returning 0. Stopping all software RAID devices, just in case Done. [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#726: Making list of drives [Main] mondo-prep.c->partition_drive#1504: Partitioning drive /dev/cciss/c0d0 [Main] mondo-prep.c->partition_drive#1589: Found partition /dev/cciss/c0d0p1 in mountlist [Main] mondo-prep.c->partition_drive#1592: Wiping /dev/cciss/c0d0's partition table [Main] mondo-prep.c->partition_drive#1614: mondo-prep.c, partition_drive, 1614: New, kernel-friendly partition remover [Main] mondo-prep.c->partition_device#1738: partition_device('/dev/cciss/c0d0', 1, 0, 'swap', 8394399) --- starting [Main] mondo-prep.c->partition_device#1758: Partitioning device /dev/cciss/c0d0p1 (8197 MB) [Main] libmondo-devices.c->is_this_device_mounted#1130: Is /dev/cciss/c0d0p1 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1156: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d0p1 " > /dev/null 2> /dev/null' Looking for partition table format type [Main] libmondo-devices.c->which_partition_format#2647: Using /sbin/parted2fdisk Found MBR partition table format type [Main] mondo-prep.c->partition_device#1839: Doing the new all-in-one fdisk thing [Main] mondo-prep.c->partition_device#1840: output = 'n p 1 +8394399K ' [Main] mondo-prep.c->partition_device#1845: Successfully created partition 1 on /dev/cciss/c0d0 [Main] mondo-prep.c->partition_device#1851: Trying to set partition 1 type now on /dev/cciss/c0d0 [Main] mondo-prep.c->set_partition_type#2109: Setting /dev/cciss/c0d0p1's type to swap (82) [Main] mondo-prep.c->partition_device#1919: partition_device() --- leaving [Main] mondo-prep.c->partition_drive#1589: Found partition /dev/cciss/c0d0p2 in mountlist [Main] mondo-prep.c->partition_device#1738: partition_device('/dev/cciss/c0d0', 2, 1, 'ext3', 31465098) --- starting [Main] mondo-prep.c->partition_device#1758: Partitioning device /dev/cciss/c0d0p2 (30727 MB) [Main] libmondo-devices.c->is_this_device_mounted#1130: Is /dev/cciss/c0d0p2 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1156: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d0p2 " > /dev/null 2> /dev/null' Looking for partition table format type [Main] libmondo-devices.c->which_partition_format#2647: Using /sbin/parted2fdisk Found MBR partition table format type [Main] mondo-prep.c->partition_device#1839: Doing the new all-in-one fdisk thing [Main] mondo-prep.c->partition_device#1840: output = 'n p 2 +31465098K ' [Main] mondo-prep.c->partition_device#1845: Successfully created partition 2 on /dev/cciss/c0d0 [Main] mondo-prep.c->partition_device#1851: Trying to set partition 2 type now on /dev/cciss/c0d0 [Main] mondo-prep.c->set_partition_type#2109: Setting /dev/cciss/c0d0p2's type to ext3 (83) [Main] mondo-prep.c->partition_device#1919: partition_device() --- leaving [Main] mondo-prep.c->partition_drive#1589: Found partition /dev/cciss/c0d0p3 in mountlist [Main] mondo-prep.c->partition_device#1738: partition_device('/dev/cciss/c0d0', 3, 2, 'lvm', 103480576) --- starting [Main] mondo-prep.c->partition_device#1758: Partitioning device /dev/cciss/c0d0p3 (101055 MB) [Main] libmondo-devices.c->is_this_device_mounted#1130: Is /dev/cciss/c0d0p3 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1156: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d0p3 " > /dev/null 2> /dev/null' Looking for partition table format type [Main] libmondo-devices.c->which_partition_format#2647: Using /sbin/parted2fdisk Found MBR partition table format type [Main] mondo-prep.c->partition_device#1839: Doing the new all-in-one fdisk thing [Main] mondo-prep.c->partition_device#1840: output = 'n p 3 +103480576K ' [Main] mondo-prep.c->partition_device#1845: Successfully created partition 3 on /dev/cciss/c0d0 [Main] mondo-prep.c->partition_device#1851: Trying to set partition 3 type now on /dev/cciss/c0d0 [Main] mondo-prep.c->set_partition_type#2109: Setting /dev/cciss/c0d0p3's type to lvm (8e) [Main] mondo-prep.c->partition_device#1919: partition_device() --- leaving ------------------- fdisk.log looks like this ------------------ The number of cylinders for this disk is set to 17844. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Warning: partition 4 has empty type Command (m for help): Partition number (1-4): Command (m for help): Partition number (1-4): Command (m for help): Selected partition 1 Command (m for help): 1: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (1-17844, default 1): Using default value 1 Last cylinder or +size or +sizeM or +sizeK (1-17844, default 17844): +8394399K Command (m for help): Command (m for help): Command (m for help): p Disk /dev/cciss/c0d0: 146.7 GB, 146778685440 bytes 255 heads, 63 sectors/track, 17844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/cciss/c0d0p1 1 1046 8401963+ 83 Linux Command (m for help): t Selected partition 1 Hex code (type L to list codes): 82 Changed system type of partition 1 to 82 (Linux swap / Solaris) Command (m for help): Command (m for help): p Disk /dev/cciss/c0d0: 146.7 GB, 146778685440 bytes 255 heads, 63 sectors/track, 17844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/cciss/c0d0p1 1 1046 8401963+ 82 Linux swap / Solaris Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 2 First cylinder (1047-17844, default 1047): Using default value 1047 Last cylinder or +size or +sizeM or +sizeK (1047-17844, default 17844): +31465098K Command (m for help): Command (m for help): Command (m for help): p Disk /dev/cciss/c0d0: 146.7 GB, 146778685440 bytes 255 heads, 63 sectors/track, 17844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/cciss/c0d0p1 1 1046 8401963+ 82 Linux swap / Solaris /dev/cciss/c0d0p2 1047 4964 31471335 83 Linux Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 3 First cylinder (4965-17844, default 4965): Using default value 4965 Last cylinder or +size or +sizeM or +sizeK (4965-17844, default 17844): +103480576K Value out of range. Last cylinder or +size or +sizeM or +sizeK (4965-17844, default 17844): Using default value 17844 Command (m for help): Command (m for help): p Disk /dev/cciss/c0d0: 146.7 GB, 146778685440 bytes 255 heads, 63 sectors/track, 17844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/cciss/c0d0p1 1 1046 8401963+ 82 Linux swap / Solaris /dev/cciss/c0d0p2 1047 4964 31471335 83 Linux /dev/cciss/c0d0p3 4965 17844 103458600 83 Linux Command (m for help): t Partition number (1-4): 3 Hex code (type L to list codes): 8e Changed system type of partition 3 to 8e (Linux LVM) Command (m for help): Command (m for help): p Disk /dev/cciss/c0d0: 146.7 GB, 146778685440 bytes 255 heads, 63 sectors/track, 17844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/cciss/c0d0p1 1 1046 8401963+ 82 Linux swap / Solaris /dev/cciss/c0d0p2 1047 4964 31471335 83 Linux /dev/cciss/c0d0p3 4965 17844 103458600 8e Linux LVM Command (m for help): a Partition number (1-4): 2 Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks. ------------------- end of fdisk.log... word! ------------------ [Main] mondo-prep.c->partition_drive#1504: Partitioning drive /dev/cciss/c0d1 [Main] mondo-prep.c->partition_drive#1589: Found partition /dev/cciss/c0d1p1 in mountlist [Main] mondo-prep.c->partition_drive#1592: Wiping /dev/cciss/c0d1's partition table [Main] mondo-prep.c->partition_drive#1614: mondo-prep.c, partition_drive, 1614: New, kernel-friendly partition remover [Main] mondo-prep.c->partition_device#1738: partition_device('/dev/cciss/c0d1', 1, 0, 'ext3', 143339088) --- starting [Main] mondo-prep.c->partition_device#1758: Partitioning device /dev/cciss/c0d1p1 (139979 MB) [Main] libmondo-devices.c->is_this_device_mounted#1130: Is /dev/cciss/c0d1p1 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1156: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d1p1 " > /dev/null 2> /dev/null' Looking for partition table format type [Main] libmondo-devices.c->which_partition_format#2647: Using /sbin/parted2fdisk Found MBR partition table format type [Main] mondo-prep.c->partition_device#1839: Doing the new all-in-one fdisk thing [Main] mondo-prep.c->partition_device#1840: output = 'n p 1 +143339088K ' [Main] mondo-prep.c->partition_device#1845: Successfully created partition 1 on /dev/cciss/c0d1 [Main] mondo-prep.c->partition_device#1851: Trying to set partition 1 type now on /dev/cciss/c0d1 [Main] mondo-prep.c->set_partition_type#2109: Setting /dev/cciss/c0d1p1's type to ext3 (83) [Main] mondo-prep.c->partition_device#1919: partition_device() --- leaving ------------------- fdisk.log looks like this ------------------ The number of cylinders for this disk is set to 17844. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Value out of range. Partition number (1-4): Partition number (1-4): Warning: partition 4 has empty type Command (m for help): Partition number (1-4): Warning: partition 3 has empty type Command (m for help): Partition number (1-4): Warning: partition 2 has empty type Command (m for help): Selected partition 1 Command (m for help): 1: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (1-17844, default 1): Using default value 1 Last cylinder or +size or +sizeM or +sizeK (1-17844, default 17844): +143339088K Value out of range. Last cylinder or +size or +sizeM or +sizeK (1-17844, default 17844): Using default value 17844 Command (m for help): Command (m for help): p Disk /dev/cciss/c0d1: 146.7 GB, 146778685440 bytes 255 heads, 63 sectors/track, 17844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/cciss/c0d1p1 1 17844 143331898+ 83 Linux Command (m for help): a Partition number (1-4): 2 Warning: partition 2 has empty type Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks. ------------------- end of fdisk.log... word! ------------------ Done. Preparing to format your disk(s) Please wait. This may take a few minutes. [Main] mondo-prep.c->format_everything#937: format_everything (mountlist, interactively = false Formatting partitions [Main] mondo-prep.c->format_everything#949: Stopping all RAID devices [Main] mondo-prep.c->format_everything#955: Prepare soft-RAIDs [Main] mondo-prep.c->format_everything#958: Examining /dev/cciss/c0d0p3 [Main] mondo-prep.c->format_everything#958: Examining /dev/cciss/c0d0p2 [Main] mondo-prep.c->format_everything#958: Examining /dev/cciss/c0d1p1 [Main] mondo-prep.c->format_everything#958: Examining /dev/system/home [Main] mondo-prep.c->format_everything#958: Examining /dev/system/opt [Main] mondo-prep.c->format_everything#958: Examining /dev/system/tftpboot [Main] mondo-prep.c->format_everything#958: Examining /dev/system/tmp [Main] mondo-prep.c->format_everything#958: Examining /dev/system/usr [Main] mondo-prep.c->format_everything#958: Examining /dev/system/var [Main] mondo-prep.c->format_everything#958: Examining /dev/cciss/c0d0p1 [Main] mondo-prep.c->format_everything#985: Creating LVMs [Main] mondo-rstr-tools.c->wait_until_software_raids_are_prepped#2431: mondo-rstr-tools.c, wait_until_software_raids_are_prepped, 2431: wait_until_software_raids_are_prepped Configuring LVM [Main] mondo-prep.c->do_my_funky_lvm_stuff#254: mondo-prep.c, do_my_funky_lvm_stuff, 254: STARTING [Main] mondo-prep.c->do_my_funky_lvm_stuff#255: OK, opened i-want-my-lvm. Shutting down LVM volumes... [Main] libmondo-files.c->find_home_of_exe#359: find_home_of_exe () --- Found lvm at /sbin/lvm [Main] mondo-prep.c->do_my_funky_lvm_stuff#288: OK, rewound i-want-my-lvm. Doing funky stuff... lvm vgchange -an --> 0 echo y | pvcreate -ff /dev/cciss/c0d0p3 --> 1280 lvm vgscan --> 0 [Main] mondo-prep.c->do_my_funky_lvm_stuff#320: Deleting old entries at /dev/system running: rm -Rf /dev/system > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: lvm vgscan > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- Reading all physical volumes. This may take a while... File descriptor 3 left open File descriptor 4 left open File descriptor 5 left open File descriptor 6 left open File descriptor 7 left open File descriptor 8 left open No volume groups found --------------------------------end of output------------------------------ ...ran just fine. :-) running: lvm pvscan > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- No matching physical volumes found File descriptor 3 left open File descriptor 4 left open File descriptor 5 left open File descriptor 6 left open File descriptor 7 left open File descriptor 8 left open --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-prep.c->do_my_funky_lvm_stuff#329: After working around potentially broken i-want-my-lvm, incoming[] is now '# lvm vgcreate system -l 0 -p 0 -s 4m /dev/cciss/c0d0p3 ' vgcreate system -l 0 -p 0 -s 4m /dev/cciss/c0d0p3 --> 1280 In case you're interested... running: lvm vgscan > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- Reading all physical volumes. This may take a while... File descriptor 3 left open File descriptor 4 left open File descriptor 5 left open File descriptor 6 left open File descriptor 7 left open File descriptor 8 left open No volume groups found --------------------------------end of output------------------------------ ...ran just fine. :-) running: lvm pvscan > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- No matching physical volumes found File descriptor 3 left open File descriptor 4 left open File descriptor 5 left open File descriptor 6 left open File descriptor 7 left open File descriptor 8 left open --------------------------------end of output------------------------------ ...ran just fine. :-) vgchange -a y system --> 1280 lvcreate -L 30720m -r 0 -n home system --> 1280 [Main] mondo-prep.c->do_my_funky_lvm_stuff#349: echo " vgchange -a y system" >> /tmp/out.sh... so I'll get creative. lvcreate -L 30720m -r 0 -n home system --> 1 lvcreate -L 10240m -r 0 -n opt system --> 1280 [Main] mondo-prep.c->do_my_funky_lvm_stuff#349: echo " lvcreate -L 30720m -r 0 -n home system" >> /tmp/out.sh... so I'll get creative. lvcreate -L 349m m -r 0 -n opt system --> 1 lvcreate -L 15360m -r 0 -n tmp system --> 1280 [Main] mondo-prep.c->do_my_funky_lvm_stuff#349: echo " lvcreate -L 349m m -r 0 -n opt system" >> /tmp/out.sh... so I'll get creative. lvcreate -L 349m m -r 0 -n tmp system --> 1 lvcreate -L 8622m -r 0 -n usr system --> 1280 [Main] mondo-prep.c->do_my_funky_lvm_stuff#349: echo " lvcreate -L 349m m -r 0 -n tmp system" >> /tmp/out.sh... so I'll get creative. lvcreate -L 349m -r 0 -n usr system --> 1 lvcreate -L 10240m -r 0 -n var system --> 1280 [Main] mondo-prep.c->do_my_funky_lvm_stuff#349: echo " lvcreate -L 349m -r 0 -n usr system" >> /tmp/out.sh... so I'll get creative. lvcreate -L 349m m -r 0 -n var system --> 1 lvcreate -L 15360m -r 0 -n tftpboot system --> 1280 [Main] mondo-prep.c->do_my_funky_lvm_stuff#349: echo " lvcreate -L 349m m -r 0 -n var system" >> /tmp/out.sh... so I'll get creative. lvcreate -L 349m m -r 0 -n tftpboot system --> 1 lvm vgscan --> 0 [Main] mondo-prep.c->do_my_funky_lvm_stuff#414: Closed i-want-my-lvm. Finished doing funky stuff. [Main] mondo-prep.c->do_my_funky_lvm_stuff#431: mondo-prep.c, do_my_funky_lvm_stuff, 431: ENDING [Main] mondo-prep.c->do_my_funky_lvm_stuff#433: 9 errors. I'm reporting this. Failed to initialize LVM [Main] mondo-prep.c->format_everything#1024: Formatting regulars [Main] mondo-prep.c->format_everything#1037: Not formatting /dev/cciss/c0d0p3 - it's an LVM [Main] libmondo-devices.c->is_this_device_mounted#1130: Is /dev/cciss/c0d0p2 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1156: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d0p2 " > /dev/null 2> /dev/null' running: sh -c 'echo -en "y\ny\ny\n" | mkfs -t ext3 -F -q /dev/cciss/c0d0p2' > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- /dev/cciss/c0d0p2 is apparently in use by the system; mke2fs forced anyway. --------------------------------end of output------------------------------ ...ran just fine. :-) Formatting /dev/cciss/c0d0p2 as ext3...OK [Main] libmondo-devices.c->is_this_device_mounted#1130: Is /dev/cciss/c0d1p1 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1156: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d1p1 " > /dev/null 2> /dev/null' running: sh -c 'echo -en "y\ny\ny\n" | mkfs -t ext3 -F -q /dev/cciss/c0d1p1' > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- /dev/cciss/c0d1p1 is apparently in use by the system; mke2fs forced anyway. --------------------------------end of output------------------------------ ...ran just fine. :-) Formatting /dev/cciss/c0d1p1 as ext3...OK [Main] mondo-prep.c->format_everything#1050: Not formatting /dev/system/home yet - doesn't exist - probably an LVM [Main] mondo-prep.c->format_everything#1050: Not formatting /dev/system/opt yet - doesn't exist - probably an LVM [Main] mondo-prep.c->format_everything#1050: Not formatting /dev/system/tftpboot yet - doesn't exist - probably an LVM [Main] mondo-prep.c->format_everything#1050: Not formatting /dev/system/tmp yet - doesn't exist - probably an LVM [Main] mondo-prep.c->format_everything#1050: Not formatting /dev/system/usr yet - doesn't exist - probably an LVM [Main] mondo-prep.c->format_everything#1050: Not formatting /dev/system/var yet - doesn't exist - probably an LVM [Main] libmondo-devices.c->is_this_device_mounted#1130: Is /dev/cciss/c0d0p1 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1156: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d0p1 " > /dev/null 2> /dev/null' running: sh -c 'echo -en "y\ny\ny\n" | mkswap /dev/cciss/c0d0p1' > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- /dev/cciss/c0d0p1: Device or resource busy --------------------------------end of output------------------------------ ...ran with res=256 Formatting /dev/cciss/c0d0p1 as swap...failed Failed. Errors occurred during the formatting of your hard drives. [Main] mondo-prep.c->format_everything#1088: format_everything () - failed! Failed to partition and/or format your hard drives. Run complete. Errors were reported. Please review the logfile. [Main] mondorestore.c->main#3223: No post-nuke found. Restore log (/var/log/mondorestore.log) copied to /var/log on your hard disk Mondo-restore is exiting (retval=257) root is mounted at /dev/root No, Schlomo, that doesn't mean /dev/root is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [Main] libmondo-devices.c->am_I_in_disaster_recovery_mode#147: Is this a ramdisk? result = 1 running: mount / -o remount,rw > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: umount /mnt/cdrom > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err --------------------------------start of output----------------------------- Command failed (Invalid argument) --------------------------------end of output------------------------------ ...ran with res=512 [Main] newt-specific.c->finish#397: Calling newtFinished() 08:10 Launching Shell