[TH=5008] libmondo-tools.c->reset_bkpinfo#753: Hi root is mounted at /dev/mapper/VolGroup-LogVol00 No, Schlomo, that doesn't mean /dev/mapper/VolGroup-LogVol00 is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [TH=5008] libmondo-devices.c->am_I_in_disaster_recovery_mode#164: Is this a ramdisk? result = 0 [TH=5008] libmondo-devices.c->sensibly_set_tmpdir_and_scratchdir#2941: bkpinfo->tmpdir is being set to //mondo.tmp.jQzXZf [TH=5008] libmondo-devices.c->sensibly_set_tmpdir_and_scratchdir#2945: bkpinfo->scratchdir is being set to //mondo.scratch.17767 running: mkdir -p /mnt/cdrom > //mondo.tmp.jQzXZf/mondo-run-prog-thing.tmp 2> //mondo.tmp.jQzXZf/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) root is mounted at /dev/mapper/VolGroup-LogVol00 No, Schlomo, that doesn't mean /dev/mapper/VolGroup-LogVol00 is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [TH=5008] libmondo-devices.c->am_I_in_disaster_recovery_mode#164: Is this a ramdisk? result = 0 [Main] libmondo-tools.c->get_kernel_version#254: g_kernel_version = 2.618000 [Main] mondorestore.c->main#2893: FYI - g_mountlist_fname = //mondo.tmp.jQzXZf/tmp/mountlist.txt [Main] mondorestore.c->main#2906: 2906: Warning - g_mountlist_fname (//mondo.tmp.jQzXZf/tmp/mountlist.txt) does not exist yet running: umount /mnt/cdrom > //mondo.tmp.jQzXZf/mondo-run-prog-thing.tmp 2> //mondo.tmp.jQzXZf/mondo-run-prog-thing.err --------------------------------start of output----------------------------- umount: /mnt/cdrom: not mounted --------------------------------end of output------------------------------ ...ran with res=256 running: rm -Rf /tmp/tmpfs/mondo.tmp.* > //mondo.tmp.jQzXZf/mondo-run-prog-thing.tmp 2> //mondo.tmp.jQzXZf/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) -------------- Mondo Restore v2.2.9.7-r2840 ------------- DON'T PANIC! Mondorestore logs almost everything, so please don't break out in a cold sweat just because you see a few error messages in the log. Read them; analyze them; see if they are significant; above all, verify your backups! Please attach a compressed copy of this log to any e-mail you send to the Mondo mailing list when you are seeking technical support. Without it, we can't help you. - DevTeam ------------------------------------------------------------ BTW, despite (or perhaps because of) the wealth of messages, some users are inclined to stop reading this log. If Mondo stopped for some reason, chances are it's detailed here. More than likely there's a message at the very end of this log that will tell you what is wrong. Please read it! ------------------------------------------------------------ [Main] mondorestore.c->main#2930: I am in normal, live mode [Main] mondorestore.c->main#2933: what time is it [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found afio at /usr/bin/afio running: which mkfs.vfat > //mondo.tmp.jQzXZf/mondo-run-prog-thing.tmp 2> //mondo.tmp.jQzXZf/mondo-run-prog-thing.err --------------------------------start of output----------------------------- /sbin/mkfs.vfat --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-cli.c->handle_incoming_parameters#100: Switches:- [Main] mondorestore.c->main#3094: I am in normal, live mode. [Main] mondorestore.c->main#3095: FYI, MOUNTLIST_FNAME = //mondo.tmp.jQzXZf/tmp/mountlist.txt [Main] libmondo-tools.c->mount_boot_if_necessary#1168: Started sub [Main] libmondo-tools.c->mount_boot_if_necessary#1169: About to set g_boot_mountpt[0] to '\0' [Main] libmondo-tools.c->mount_boot_if_necessary#1171: Done. Great. Seeting command to something [Main] libmondo-tools.c->mount_boot_if_necessary#1174: Cool. Command = 'grep -v ":" /etc/fstab | grep -vE '^#.*$' | grep -E "[ ]/boot[ ]" | tr -s ' ' ' ' | cut -f1 | head -n1' [Main] libmondo-tools.c->mount_boot_if_necessary#1178: tmp = 'LABEL=/boot' [Main] libmondo-tools.c->mount_boot_if_necessary#1180: /boot is at LABEL=/boot according to /etc/fstab [Main] libmondo-tools.c->mount_boot_if_necessary#1224: Ended sub [Main] mondorestore.c->main#3097: Still here. [Main] mondorestore.c->main#3101: Calling restore_to_live_filesystem() [Main] mondorestore.c->restore_to_live_filesystem#955: restore_to_live_filesystem() - starting Please insert tape/CD/USB Key, then hit 'OK' to continue. [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2205: media type = tape running: ls -l st0 > //mondo.tmp.jQzXZf/mondo-run-prog-thing.tmp 2> //mondo.tmp.jQzXZf/mondo-run-prog-thing.err --------------------------------start of output----------------------------- ls: st0: No such file or directory --------------------------------end of output------------------------------ ...ran with res=512 User has not specified a valid /dev entry running: umount /mnt/cdrom > //mondo.tmp.jQzXZf/mondo-run-prog-thing.tmp 2> //mondo.tmp.jQzXZf/mondo-run-prog-thing.err --------------------------------start of output----------------------------- umount: /mnt/cdrom: not mounted --------------------------------end of output------------------------------ ...ran with res=256 [Main] ../common/newt-specific.c->finish#422: Calling newtSuspend() [TH=29456] libmondo-tools.c->reset_bkpinfo#753: Hi root is mounted at /dev/mapper/VolGroup-LogVol00 No, Schlomo, that doesn't mean /dev/mapper/VolGroup-LogVol00 is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [TH=29456] libmondo-devices.c->am_I_in_disaster_recovery_mode#164: Is this a ramdisk? result = 0 [TH=29456] libmondo-devices.c->sensibly_set_tmpdir_and_scratchdir#2941: bkpinfo->tmpdir is being set to //mondo.tmp.MWIZt6 [TH=29456] libmondo-devices.c->sensibly_set_tmpdir_and_scratchdir#2945: bkpinfo->scratchdir is being set to //mondo.scratch.17767 running: mkdir -p /mnt/cdrom > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) root is mounted at /dev/mapper/VolGroup-LogVol00 No, Schlomo, that doesn't mean /dev/mapper/VolGroup-LogVol00 is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [TH=29456] libmondo-devices.c->am_I_in_disaster_recovery_mode#164: Is this a ramdisk? result = 0 [Main] libmondo-tools.c->get_kernel_version#254: g_kernel_version = 2.618000 [Main] mondorestore.c->main#2893: FYI - g_mountlist_fname = //mondo.tmp.MWIZt6/tmp/mountlist.txt [Main] mondorestore.c->main#2906: 2906: Warning - g_mountlist_fname (//mondo.tmp.MWIZt6/tmp/mountlist.txt) does not exist yet running: umount /mnt/cdrom > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- umount: /mnt/cdrom: not mounted --------------------------------end of output------------------------------ ...ran with res=256 running: rm -Rf /tmp/tmpfs/mondo.tmp.* > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) -------------- Mondo Restore v2.2.9.7-r2840 ------------- DON'T PANIC! Mondorestore logs almost everything, so please don't break out in a cold sweat just because you see a few error messages in the log. Read them; analyze them; see if they are significant; above all, verify your backups! Please attach a compressed copy of this log to any e-mail you send to the Mondo mailing list when you are seeking technical support. Without it, we can't help you. - DevTeam ------------------------------------------------------------ BTW, despite (or perhaps because of) the wealth of messages, some users are inclined to stop reading this log. If Mondo stopped for some reason, chances are it's detailed here. More than likely there's a message at the very end of this log that will tell you what is wrong. Please read it! ------------------------------------------------------------ [Main] mondorestore.c->main#2930: I am in normal, live mode [Main] mondorestore.c->main#2933: what time is it [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found afio at /usr/bin/afio running: which mkfs.vfat > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- /sbin/mkfs.vfat --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-cli.c->handle_incoming_parameters#100: Switches:- [Main] mondorestore.c->main#3094: I am in normal, live mode. [Main] mondorestore.c->main#3095: FYI, MOUNTLIST_FNAME = //mondo.tmp.MWIZt6/tmp/mountlist.txt [Main] libmondo-tools.c->mount_boot_if_necessary#1168: Started sub [Main] libmondo-tools.c->mount_boot_if_necessary#1169: About to set g_boot_mountpt[0] to '\0' [Main] libmondo-tools.c->mount_boot_if_necessary#1171: Done. Great. Seeting command to something [Main] libmondo-tools.c->mount_boot_if_necessary#1174: Cool. Command = 'grep -v ":" /etc/fstab | grep -vE '^#.*$' | grep -E "[ ]/boot[ ]" | tr -s ' ' ' ' | cut -f1 | head -n1' [Main] libmondo-tools.c->mount_boot_if_necessary#1178: tmp = 'LABEL=/boot' [Main] libmondo-tools.c->mount_boot_if_necessary#1180: /boot is at LABEL=/boot according to /etc/fstab [Main] libmondo-tools.c->mount_boot_if_necessary#1224: Ended sub [Main] mondorestore.c->main#3097: Still here. [Main] mondorestore.c->main#3101: Calling restore_to_live_filesystem() [Main] mondorestore.c->restore_to_live_filesystem#955: restore_to_live_filesystem() - starting Please insert tape/CD/USB Key, then hit 'OK' to continue. [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2205: media type = tape running: ls -l /dev/st0 > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- crw-rw---- 1 root disk 9, 0 Feb 5 23:02 /dev/st0 --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2405: sz_size = [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2416: media_size[0] = 0 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2815: isodir = /var/cache/mondo [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2816: netfs_mount = '' [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2825: media device = /dev/st0 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2826: media size = 0 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2828: media type = tape [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2829: prefix = mondorescue [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2830: compression = 5 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2831: exclude_path = (null) [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2832: include_path = [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2840: scratchdir = '//mondo.scratch.17767/mondo.scratch.3482' [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2841: tmpdir = '//mondo.tmp.MWIZt6' [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2842: image_devs = '' [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2844: boot_device = '' (loader=) [Main] mondorestore.c->restore_to_live_filesystem#973: bkpinfo->media_device = /dev/st0 [Main] mondorestore.c->restore_to_live_filesystem#979: bkpinfo->isodir = /var/cache/mondo [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2117: gcffa --- starting I'm thinking... running: mkdir -p //mondo.tmp.MWIZt6/mount.bootdisk > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2133: mountpt = //mondo.tmp.MWIZt6/mount.bootdisk; cfg_file=//mondo.tmp.MWIZt6/tmp/mondo-restore.cfg [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2136: gcffa --- we don't have cfg file yet. [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2153: gcffa --- OK, switching to Plan B running: mkdir -p tmp > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-stream.c->skip_obdr#693: Skipping OBDR headers running: mt -f /dev/st0 rewind > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: mt -f /dev/st0 fsf 2 > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- /dev/st0: Input/output error --------------------------------end of output------------------------------ ...ran with res=512 running: mt -f /dev/st0 setblk 32768 > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->extract_cfg_file_and_mountlist_from_tape_dev#2054: command = 'dd if=/dev/st0 bs=32768 count=1024 2> /dev/null | tar -zx ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm' running: dd if=/dev/st0 bs=32768 count=1024 2> /dev/null | tar -zx ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2214: gcffa --- great! We've got the config file [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2219: cp -f /mondo.tmp.MWIZt6/tmp/mondo-restore.cfg //mondo.tmp.MWIZt6/tmp/mondo-restore.cfg running: cp -f /mondo.tmp.MWIZt6/tmp/mondo-restore.cfg //mondo.tmp.MWIZt6/tmp/mondo-restore.cfg > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- cp: `/mondo.tmp.MWIZt6/tmp/mondo-restore.cfg' and `//mondo.tmp.MWIZt6/tmp/mondo-restore.cfg' are the same file --------------------------------end of output------------------------------ ...ran with res=256 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2224: ... but an error occurred when I tried to move it to //mondo.tmp.MWIZt6/tmp/mondo-restore.cfg [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2231: cp -f /mondo.tmp.MWIZt6/tmp/mountlist.txt //mondo.tmp.MWIZt6/tmp/mountlist.txt running: umount /mnt/cdrom > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- umount: /mnt/cdrom: not mounted --------------------------------end of output------------------------------ ...ran with res=256 Recovered mondo-restore.cfg running: cp -f //mondo.tmp.MWIZt6/tmp/mondo-restore.cfg /tmp/mondo-restore.cfg > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: cp -f etc/raidtab /etc/ > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- cp: cannot stat `etc/raidtab': No such file or directory --------------------------------end of output------------------------------ ...ran with res=256 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#766: Not in Disaster Recovery Mode. No need to derive device name from config file. [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#784: We will restore ACLs [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#792: We will restore XATTRs [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#801: Internal tape block size has been custom-set to 32768 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#840: differential var = '0' [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#844: This is a regular (full) backup [Main] libmondo-mountlist.c->load_mountlist#830: Loading mountlist... [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/cciss/c0d0p2 [Main] libmondo-mountlist.c->load_mountlist#899: /dev/cciss/c0d0p2 lvm lvm 71545477 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/VolGroup00/LogVol00 [Main] libmondo-mountlist.c->load_mountlist#899: /dev/VolGroup00/LogVol00 / ext3 0 [Main] libmondo-mountlist.c->load_mountlist#899: /dev/cciss/c0d0p1 /boot ext3 104391 /boot [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/VolGroup00/LogVol01 [Main] libmondo-mountlist.c->load_mountlist#899: /dev/VolGroup00/LogVol01 swap swap 0 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/sda1 [Main] libmondo-mountlist.c->load_mountlist#899: /dev/sda1 /u01 ext3 157286399 [Main] libmondo-mountlist.c->load_mountlist#911: Mountlist loaded successfully. [Main] libmondo-mountlist.c->load_mountlist#912: 5 entries in mountlist [Main] libmondo-mountlist.c->load_mountlist#830: Loading mountlist... [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/cciss/c0d0p2 [Main] libmondo-mountlist.c->load_mountlist#899: /dev/cciss/c0d0p2 lvm lvm 71545477 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/VolGroup00/LogVol00 [Main] libmondo-mountlist.c->load_mountlist#899: /dev/VolGroup00/LogVol00 / ext3 0 [Main] libmondo-mountlist.c->load_mountlist#899: /dev/cciss/c0d0p1 /boot ext3 104391 /boot [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/VolGroup00/LogVol01 [Main] libmondo-mountlist.c->load_mountlist#899: /dev/VolGroup00/LogVol01 swap swap 0 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/sda1 [Main] libmondo-mountlist.c->load_mountlist#899: /dev/sda1 /u01 ext3 157286399 [Main] libmondo-mountlist.c->load_mountlist#911: Mountlist loaded successfully. [Main] libmondo-mountlist.c->load_mountlist#912: 5 entries in mountlist [Main] libmondo-files.c->length_of_file#537: filename=/etc/raidtab Unable to openin filename (No such file or directory) [Main] libmondo-raid.c->load_raidtab_into_raidlist#613: Raidtab is very small or non-existent. Ignoring it. [Main] mondo-rstr-tools.c->process_filelist_and_biggielist#1018: //mondo.tmp.MWIZt6/tmp/filelist.full.gz exists [Main] mondo-rstr-tools.c->process_filelist_and_biggielist#1019: //mondo.tmp.MWIZt6/tmp/biggielist.txt exists [Main] mondo-rstr-tools.c->process_filelist_and_biggielist#1021: Filelist and biggielist already recovered from media. Yay! root is mounted at /dev/mapper/VolGroup-LogVol00 No, Schlomo, that doesn't mean /dev/mapper/VolGroup-LogVol00 is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [Main] libmondo-devices.c->am_I_in_disaster_recovery_mode#164: Is this a ramdisk? result = 0 [Main] mondo-rstr-tools.c->process_filelist_and_biggielist#1134: Forking Pre-processing filelist [TH=4444] mondo-rstr-tools.c->process_filelist_and_biggielist#1149: grep -E '^/dev/.*' //mondo.tmp.MWIZt6/tmp/biggielist.txt > //mondo.tmp.MWIZt6/tmp/filelist.imagedevs [Main] mondo-rstr-tools.c->process_filelist_and_biggielist#1162: loading filelist Loading filelist [Main] libmondo-filelist.c->load_filelist#949: Finished loading filelist [Main] mondo-rstr-tools.c->process_filelist_and_biggielist#1164: deleting original filelist Editing filelist [Main] libmondo-filelist.c->toggle_all_root_dirs_on#1093: Toggling all root dirs ON [Main] libmondo-filelist.c->toggle_all_root_dirs_on#1112: Finished toggling all root dirs ON [Main] mondo-rstr-newt.c->edit_filelist#1071: You selected '/home' [Main] libmondo-filelist.c->toggle_path_selection#1219: Toggling path's selection [Main] libmondo-filelist.c->toggle_path_selection#1241: Finished toggling selection [Main] mondo-rstr-newt.c->edit_filelist#1071: You selected '/home' [Main] libmondo-filelist.c->toggle_path_selection#1219: Toggling path's selection [Main] libmondo-filelist.c->toggle_path_selection#1241: Finished toggling selection [Main] mondo-rstr-newt.c->edit_filelist#1071: You selected '/home' [Main] mondo-rstr-newt.c->edit_filelist#1071: You selected '/home/banjobs8' [Main] mondo-rstr-newt.c->edit_filelist#1071: You selected '/home/banjobs8/bin' Too many lines. Displaying first 2000 entries only. Close a directory to see more. [Main] mondo-rstr-newt.c->edit_filelist#1071: You selected '/home/banjobs8/bin' [Main] libmondo-filelist.c->toggle_path_selection#1219: Toggling path's selection [Main] libmondo-filelist.c->toggle_path_selection#1241: Finished toggling selection Too many lines. Displaying first 2000 entries only. Close a directory to see more. Saving filelist [Main] libmondo-filelist.c->save_filelist#1066: Finished saving filelist [Main] mondorestore.c->restore_to_live_filesystem#997: Restoring everything [Main] mondorestore.c->restore_everything#2708: restore_everything() --- starting running: mkdir -p /tmp/banjob8tmp > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondorestore.c->restore_everything#2713: Changing dir to /tmp/banjob8tmp [Main] mondorestore.c->restore_everything#2716: path is now /tmp/banjob8tmp [Main] mondorestore.c->restore_everything#2717: restoring everything [Main] libmondo-files.c->find_home_of_exe#363: find_home_of_exe() --- Could not find petris Preparing to read your archives Restoring OS and data from streaming media [Main] libmondo-stream.c->skip_obdr#693: Skipping OBDR headers running: mt -f /dev/st0 rewind > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: mt -f /dev/st0 fsf 2 > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- /dev/st0: Input/output error --------------------------------end of output------------------------------ ...ran with res=512 running: mt -f /dev/st0 setblk 32768 > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-stream.c->openin_tape#795: Not able to skip OBDR - Restore will have to be done manually [Main] libmondo-stream.c->insist_on_this_tape_number#472: Insisting on tape #1 [Main] libmondo-stream.c->insist_on_this_tape_number#489: I assume user has inserted it. They _say_ they have... [Main] libmondo-stream.c->insist_on_this_tape_number#493: OK, I've finished insisting. On with the revelry. [Main] libmondo-stream.c->openin_tape#809: Opening IN tape root is mounted at /dev/mapper/VolGroup-LogVol00 No, Schlomo, that doesn't mean /dev/mapper/VolGroup-LogVol00 is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [Main] libmondo-devices.c->am_I_in_disaster_recovery_mode#164: Is this a ramdisk? result = 0 running: dd if=/dev/zero bs=1024 count=16k 2> /dev/null | buffer -o /dev/null -s 32768 -m 32m > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) Negotiated max buffer of 32 MB [Main] libmondo-fifo.c->open_device_via_buffer#121: Calling buffer --- command = 'buffer -m 32m -p20 -B -s32768 -i /dev/st0 2>> /var/log/mondorestore.log' [Main] libmondo-fifo.c->open_device_via_buffer#128: Successfully opened ('r') tape device /dev/st0 running: ps | grep "buffer -m 32m -p20 -B -s32768 -i /dev/st0 2>> /var/log/mondorestore.log" > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 [Main] libmondo-fifo.c->open_device_via_buffer#136: Warning - I think I failed to open tape, actually. running: ps | grep buffer | grep -v grep > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- 28890 pts/3 00:00:00 buffer 29052 pts/3 00:00:00 buffer --------------------------------end of output------------------------------ ...ran just fine. :-) Buffer successfully started. Reading stream [Main] libmondo-stream.c->openin_tape#820: stream device = '/dev/st0' Skipping data disks on stream [Main] libmondo-stream.c->openin_tape#865: Saved all.tar.gz to '//mondo.tmp.MWIZt6/tmp/all.tar.gz' Restoring from archives Restoring from media #1 [Main] mondorestore.c->restore_all_tarballs_from_stream#2594: hey [Main] mondorestore.c->restore_all_tarballs_from_stream#2604: ho [Main] mondorestore.c->restore_all_tarballs_from_stream#2619: Reading EXAT files from tape [Main] ../common/newt-specific.c->fatal_error#308: Fatal error received - 'Wrong order expected xattr, got , sunshine.' [Main] ../common/newt-specific.c->fatal_error#326: OK, I think I'm the main PID. [Main] ../common/newt-specific.c->fatal_error#334: I'm going to do some cleaning up now. [Main] ../common/newt-specific.c->fatal_error#335: killall mindi 2> /dev/null running: ps | grep " /mondo/do-not " | awk '{print $1;}' | grep -v "grep" > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 running: kill `ps | grep " /mondo/do-not " | awk '{print $1;}' | grep -v "grep"` > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec] --------------------------------end of output------------------------------ ...ran with res=256 running: ps | grep " tmp.mondo " | awk '{print $1;}' | grep -v "grep" > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 running: kill `ps | grep " tmp.mondo " | awk '{print $1;}' | grep -v "grep"` > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec] --------------------------------end of output------------------------------ ...ran with res=256 running: ps | grep " ntfsclone " | awk '{print $1;}' | grep -v "grep" > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 running: kill `ps | grep " ntfsclone " | awk '{print $1;}' | grep -v "grep"` > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec] --------------------------------end of output------------------------------ ...ran with res=256 -------FATAL ERROR--------- Wrong order expected xattr, got , sunshine. running: umount /mnt/cdrom > //mondo.tmp.MWIZt6/mondo-run-prog-thing.tmp 2> //mondo.tmp.MWIZt6/mondo-run-prog-thing.err --------------------------------start of output----------------------------- umount: /mnt/cdrom: not mounted --------------------------------end of output------------------------------ ...ran with res=256 [Main] ../common/newt-specific.c->finish#422: Calling newtSuspend() [TH=18674] libmondo-tools.c->reset_bkpinfo#753: Hi root is mounted at /dev/mapper/VolGroup-LogVol00 No, Schlomo, that doesn't mean /dev/mapper/VolGroup-LogVol00 is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [TH=18674] libmondo-devices.c->am_I_in_disaster_recovery_mode#164: Is this a ramdisk? result = 0 [TH=18674] libmondo-devices.c->sensibly_set_tmpdir_and_scratchdir#2941: bkpinfo->tmpdir is being set to //mondo.tmp.uupDpB [TH=18674] libmondo-devices.c->sensibly_set_tmpdir_and_scratchdir#2945: bkpinfo->scratchdir is being set to //mondo.scratch.17767 running: mkdir -p /mnt/cdrom > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) root is mounted at /dev/mapper/VolGroup-LogVol00 No, Schlomo, that doesn't mean /dev/mapper/VolGroup-LogVol00 is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [TH=18674] libmondo-devices.c->am_I_in_disaster_recovery_mode#164: Is this a ramdisk? result = 0 [Main] libmondo-tools.c->get_kernel_version#254: g_kernel_version = 2.618000 [Main] mondorestore.c->main#2893: FYI - g_mountlist_fname = //mondo.tmp.uupDpB/tmp/mountlist.txt [Main] mondorestore.c->main#2906: 2906: Warning - g_mountlist_fname (//mondo.tmp.uupDpB/tmp/mountlist.txt) does not exist yet running: umount /mnt/cdrom > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- umount: /mnt/cdrom: not mounted --------------------------------end of output------------------------------ ...ran with res=256 running: rm -Rf /tmp/tmpfs/mondo.tmp.* > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) -------------- Mondo Restore v2.2.9.7-r2840 ------------- DON'T PANIC! Mondorestore logs almost everything, so please don't break out in a cold sweat just because you see a few error messages in the log. Read them; analyze them; see if they are significant; above all, verify your backups! Please attach a compressed copy of this log to any e-mail you send to the Mondo mailing list when you are seeking technical support. Without it, we can't help you. - DevTeam ------------------------------------------------------------ BTW, despite (or perhaps because of) the wealth of messages, some users are inclined to stop reading this log. If Mondo stopped for some reason, chances are it's detailed here. More than likely there's a message at the very end of this log that will tell you what is wrong. Please read it! ------------------------------------------------------------ [Main] mondorestore.c->main#2930: I am in normal, live mode [Main] mondorestore.c->main#2933: what time is it [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found afio at /usr/bin/afio running: which mkfs.vfat > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- /sbin/mkfs.vfat --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-cli.c->handle_incoming_parameters#100: Switches:- [Main] mondorestore.c->main#3094: I am in normal, live mode. [Main] mondorestore.c->main#3095: FYI, MOUNTLIST_FNAME = //mondo.tmp.uupDpB/tmp/mountlist.txt [Main] libmondo-tools.c->mount_boot_if_necessary#1168: Started sub [Main] libmondo-tools.c->mount_boot_if_necessary#1169: About to set g_boot_mountpt[0] to '\0' [Main] libmondo-tools.c->mount_boot_if_necessary#1171: Done. Great. Seeting command to something [Main] libmondo-tools.c->mount_boot_if_necessary#1174: Cool. Command = 'grep -v ":" /etc/fstab | grep -vE '^#.*$' | grep -E "[ ]/boot[ ]" | tr -s ' ' ' ' | cut -f1 | head -n1' [Main] libmondo-tools.c->mount_boot_if_necessary#1178: tmp = 'LABEL=/boot' [Main] libmondo-tools.c->mount_boot_if_necessary#1180: /boot is at LABEL=/boot according to /etc/fstab [Main] libmondo-tools.c->mount_boot_if_necessary#1224: Ended sub [Main] mondorestore.c->main#3097: Still here. [Main] mondorestore.c->main#3101: Calling restore_to_live_filesystem() [Main] mondorestore.c->restore_to_live_filesystem#955: restore_to_live_filesystem() - starting Please insert tape/CD/USB Key, then hit 'OK' to continue. [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2205: media type = tape running: ls -l /dev/st0 > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- crw-rw---- 1 root disk 9, 0 Feb 5 23:02 /dev/st0 --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2405: sz_size = [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2416: media_size[0] = 0 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2815: isodir = /var/cache/mondo [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2816: netfs_mount = '' [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2825: media device = /dev/st0 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2826: media size = 0 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2828: media type = tape [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2829: prefix = mondorescue [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2830: compression = 5 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2831: exclude_path = (null) [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2832: include_path = [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2840: scratchdir = '//mondo.scratch.17767/mondo.scratch.2234' [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2841: tmpdir = '//mondo.tmp.uupDpB' [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2842: image_devs = '' [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2844: boot_device = '' (loader=) [Main] mondorestore.c->restore_to_live_filesystem#973: bkpinfo->media_device = /dev/st0 [Main] mondorestore.c->restore_to_live_filesystem#979: bkpinfo->isodir = /var/cache/mondo [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2117: gcffa --- starting I'm thinking... running: mkdir -p //mondo.tmp.uupDpB/mount.bootdisk > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2133: mountpt = //mondo.tmp.uupDpB/mount.bootdisk; cfg_file=//mondo.tmp.uupDpB/tmp/mondo-restore.cfg [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2136: gcffa --- we don't have cfg file yet. [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2153: gcffa --- OK, switching to Plan B running: mkdir -p tmp > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: mt -f /dev/st0 setblk 32768 > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->extract_cfg_file_and_mountlist_from_tape_dev#2054: command = 'dd if=/dev/st0 bs=32768 count=1024 2> /dev/null | tar -zx ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm' running: dd if=/dev/st0 bs=32768 count=1024 2> /dev/null | tar -zx ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2214: gcffa --- great! We've got the config file [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2219: cp -f /mondo.tmp.uupDpB/tmp/mondo-restore.cfg //mondo.tmp.uupDpB/tmp/mondo-restore.cfg running: cp -f /mondo.tmp.uupDpB/tmp/mondo-restore.cfg //mondo.tmp.uupDpB/tmp/mondo-restore.cfg > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- cp: `/mondo.tmp.uupDpB/tmp/mondo-restore.cfg' and `//mondo.tmp.uupDpB/tmp/mondo-restore.cfg' are the same file --------------------------------end of output------------------------------ ...ran with res=256 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2224: ... but an error occurred when I tried to move it to //mondo.tmp.uupDpB/tmp/mondo-restore.cfg [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2231: cp -f /mondo.tmp.uupDpB/tmp/mountlist.txt //mondo.tmp.uupDpB/tmp/mountlist.txt running: umount /mnt/cdrom > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- umount: /mnt/cdrom: not mounted --------------------------------end of output------------------------------ ...ran with res=256 Recovered mondo-restore.cfg running: cp -f //mondo.tmp.uupDpB/tmp/mondo-restore.cfg /tmp/mondo-restore.cfg > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: cp -f etc/raidtab /etc/ > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- cp: cannot stat `etc/raidtab': No such file or directory --------------------------------end of output------------------------------ ...ran with res=256 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#766: Not in Disaster Recovery Mode. No need to derive device name from config file. [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#784: We will restore ACLs [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#792: We will restore XATTRs [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#801: Internal tape block size has been custom-set to 32768 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#840: differential var = '0' [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#844: This is a regular (full) backup [Main] libmondo-mountlist.c->load_mountlist#830: Loading mountlist... [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/cciss/c0d0p2 [Main] libmondo-mountlist.c->load_mountlist#899: /dev/cciss/c0d0p2 lvm lvm 71545477 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/VolGroup00/LogVol00 [Main] libmondo-mountlist.c->load_mountlist#899: /dev/VolGroup00/LogVol00 / ext3 0 [Main] libmondo-mountlist.c->load_mountlist#899: /dev/cciss/c0d0p1 /boot ext3 104391 /boot [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/VolGroup00/LogVol01 [Main] libmondo-mountlist.c->load_mountlist#899: /dev/VolGroup00/LogVol01 swap swap 0 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/sda1 [Main] libmondo-mountlist.c->load_mountlist#899: /dev/sda1 /u01 ext3 157286399 [Main] libmondo-mountlist.c->load_mountlist#911: Mountlist loaded successfully. [Main] libmondo-mountlist.c->load_mountlist#912: 5 entries in mountlist [Main] libmondo-mountlist.c->load_mountlist#830: Loading mountlist... [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/cciss/c0d0p2 [Main] libmondo-mountlist.c->load_mountlist#899: /dev/cciss/c0d0p2 lvm lvm 71545477 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/VolGroup00/LogVol00 [Main] libmondo-mountlist.c->load_mountlist#899: /dev/VolGroup00/LogVol00 / ext3 0 [Main] libmondo-mountlist.c->load_mountlist#899: /dev/cciss/c0d0p1 /boot ext3 104391 /boot [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/VolGroup00/LogVol01 [Main] libmondo-mountlist.c->load_mountlist#899: /dev/VolGroup00/LogVol01 swap swap 0 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/sda1 [Main] libmondo-mountlist.c->load_mountlist#899: /dev/sda1 /u01 ext3 157286399 [Main] libmondo-mountlist.c->load_mountlist#911: Mountlist loaded successfully. [Main] libmondo-mountlist.c->load_mountlist#912: 5 entries in mountlist [Main] libmondo-files.c->length_of_file#537: filename=/etc/raidtab Unable to openin filename (No such file or directory) [Main] libmondo-raid.c->load_raidtab_into_raidlist#613: Raidtab is very small or non-existent. Ignoring it. [Main] mondo-rstr-tools.c->process_filelist_and_biggielist#1018: //mondo.tmp.uupDpB/tmp/filelist.full.gz exists [Main] mondo-rstr-tools.c->process_filelist_and_biggielist#1019: //mondo.tmp.uupDpB/tmp/biggielist.txt exists [Main] mondo-rstr-tools.c->process_filelist_and_biggielist#1021: Filelist and biggielist already recovered from media. Yay! root is mounted at /dev/mapper/VolGroup-LogVol00 No, Schlomo, that doesn't mean /dev/mapper/VolGroup-LogVol00 is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [Main] libmondo-devices.c->am_I_in_disaster_recovery_mode#164: Is this a ramdisk? result = 0 [Main] mondo-rstr-tools.c->process_filelist_and_biggielist#1134: Forking Pre-processing filelist [TH=12019] mondo-rstr-tools.c->process_filelist_and_biggielist#1149: grep -E '^/dev/.*' //mondo.tmp.uupDpB/tmp/biggielist.txt > //mondo.tmp.uupDpB/tmp/filelist.imagedevs [Main] mondo-rstr-tools.c->process_filelist_and_biggielist#1162: loading filelist Loading filelist [Main] libmondo-filelist.c->load_filelist#949: Finished loading filelist [Main] mondo-rstr-tools.c->process_filelist_and_biggielist#1164: deleting original filelist Editing filelist [Main] libmondo-filelist.c->toggle_all_root_dirs_on#1093: Toggling all root dirs ON [Main] libmondo-filelist.c->toggle_all_root_dirs_on#1112: Finished toggling all root dirs ON [Main] mondo-rstr-newt.c->edit_filelist#1071: You selected '/home' [Main] mondo-rstr-newt.c->edit_filelist#1071: You selected '/home/banjobs8' [Main] mondo-rstr-newt.c->edit_filelist#1071: You selected '/home/banjobs8/bin' [Main] libmondo-filelist.c->toggle_path_selection#1219: Toggling path's selection [Main] libmondo-filelist.c->toggle_path_selection#1241: Finished toggling selection Saving filelist [Main] libmondo-filelist.c->save_filelist#1066: Finished saving filelist [Main] mondorestore.c->restore_to_live_filesystem#997: Restoring everything [Main] mondorestore.c->restore_everything#2708: restore_everything() --- starting running: mkdir -p /tmp/banjob8tmp/ > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondorestore.c->restore_everything#2713: Changing dir to /tmp/banjob8tmp/ [Main] mondorestore.c->restore_everything#2716: path is now /tmp/banjob8tmp [Main] mondorestore.c->restore_everything#2717: restoring everything [Main] libmondo-files.c->find_home_of_exe#363: find_home_of_exe() --- Could not find petris Preparing to read your archives Restoring OS and data from streaming media running: mt -f /dev/st0 setblk 32768 > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-stream.c->insist_on_this_tape_number#472: Insisting on tape #1 [Main] libmondo-stream.c->insist_on_this_tape_number#489: I assume user has inserted it. They _say_ they have... [Main] libmondo-stream.c->insist_on_this_tape_number#493: OK, I've finished insisting. On with the revelry. [Main] libmondo-stream.c->openin_tape#809: Opening IN tape root is mounted at /dev/mapper/VolGroup-LogVol00 No, Schlomo, that doesn't mean /dev/mapper/VolGroup-LogVol00 is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [Main] libmondo-devices.c->am_I_in_disaster_recovery_mode#164: Is this a ramdisk? result = 0 running: dd if=/dev/zero bs=1024 count=16k 2> /dev/null | buffer -o /dev/null -s 32768 -m 32m > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) Negotiated max buffer of 32 MB [Main] libmondo-fifo.c->open_device_via_buffer#121: Calling buffer --- command = 'buffer -m 32m -p20 -B -s32768 -i /dev/st0 2>> /var/log/mondorestore.log' [Main] libmondo-fifo.c->open_device_via_buffer#128: Successfully opened ('r') tape device /dev/st0 running: ps | grep "buffer -m 32m -p20 -B -s32768 -i /dev/st0 2>> /var/log/mondorestore.log" > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 [Main] libmondo-fifo.c->open_device_via_buffer#136: Warning - I think I failed to open tape, actually. running: ps | grep buffer | grep -v grep > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- 7923 pts/3 00:00:00 buffer 8087 pts/3 00:00:00 buffer --------------------------------end of output------------------------------ ...ran just fine. :-) Buffer successfully started. Reading stream [Main] libmondo-stream.c->openin_tape#820: stream device = '/dev/st0' Skipping data disks on stream [Main] libmondo-stream.c->openin_tape#865: Saved all.tar.gz to '//mondo.tmp.uupDpB/tmp/all.tar.gz' Restoring from archives Restoring from media #1 [Main] mondorestore.c->restore_all_tarballs_from_stream#2594: hey [Main] mondorestore.c->restore_all_tarballs_from_stream#2604: ho [Main] mondorestore.c->restore_all_tarballs_from_stream#2619: Reading EXAT files from tape [Main] ../common/newt-specific.c->fatal_error#308: Fatal error received - 'Wrong order expected xattr, got , sunshine.' [Main] ../common/newt-specific.c->fatal_error#326: OK, I think I'm the main PID. [Main] ../common/newt-specific.c->fatal_error#334: I'm going to do some cleaning up now. [Main] ../common/newt-specific.c->fatal_error#335: killall mindi 2> /dev/null running: ps | grep " /mondo/do-not " | awk '{print $1;}' | grep -v "grep" > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 running: kill `ps | grep " /mondo/do-not " | awk '{print $1;}' | grep -v "grep"` > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec] --------------------------------end of output------------------------------ ...ran with res=256 running: ps | grep " tmp.mondo " | awk '{print $1;}' | grep -v "grep" > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 running: kill `ps | grep " tmp.mondo " | awk '{print $1;}' | grep -v "grep"` > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec] --------------------------------end of output------------------------------ ...ran with res=256 running: ps | grep " ntfsclone " | awk '{print $1;}' | grep -v "grep" > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 running: kill `ps | grep " ntfsclone " | awk '{print $1;}' | grep -v "grep"` > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec] --------------------------------end of output------------------------------ ...ran with res=256 -------FATAL ERROR--------- Wrong order expected xattr, got , sunshine. running: umount /mnt/cdrom > //mondo.tmp.uupDpB/mondo-run-prog-thing.tmp 2> //mondo.tmp.uupDpB/mondo-run-prog-thing.err --------------------------------start of output----------------------------- umount: /mnt/cdrom: not mounted --------------------------------end of output------------------------------ ...ran with res=256 [Main] ../common/newt-specific.c->finish#422: Calling newtSuspend()