Loading your modules........Done. Starting Network... Pinging NFS server... Mounting NFS share () on /tmp/isodir... Mounting NFS image mondorescue-1.iso in / on /mnt/cdrom in loopback klogd and syslogd have been started. Running 'mdadm' Scanning LVM's... LVM's have been started. OK, we've found /mnt/cdrom/archives/*; great. Re-jigging mondo-restore.cfg because you backed up to ISOs and then burned them to CDs Done re-jigging. Yay. Warning - these modules did not make it onto the ramdisk Module ac ac97_bus asus_acpi ata_piix autofs4 backlight battery bluetooth button cdrom dm_mirror dm_mod dock drm ehci_hcd ext3 fat floppy hidp i2c_core i2c_ec i2c_i801 i915 iTCO_vendor_support iTCO_wdt ide_cd ipv6 jbd l2cap libata loop lp msdos parport parport_pc pcspkr rfcomm sbs scsi_mod sd_mod serio_raw sg snd snd_ac97_codec snd_intel8x0 snd_mixer_oss snd_page_alloc snd_pcm snd_pcm_oss snd_seq snd_seq_device snd_seq_dummy snd_seq_midi_event snd_seq_oss snd_timer soundcore sunrpc tg3 uhci_hcd vfat video backup-media-type is specified in config file - great. Calling post-init /dev/sda2 / ext3 10241437 / /dev/sda1 /boot ext3 522081 /boot /dev/sda6 /opt/kerio ext3 64741918 /opt/kerio /dev/sda5 /tmp ext3 522081 /tmp /dev/sda3 swap swap 2096472 SWAP-sda3 mondorestore found; cool... mount-me found unmount-me found mondorestore found ------------------INTERACTIVE------------------ [TH=4906] libmondo-tools.c->do_libmondo_global_strings_thing#1579: libmondo-tools.c, do_libmondo_global_strings_thing, 1579: Malloc'ing globals running: mkdir -p /mnt/cdrom > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: mkdir -p /mnt/floppy > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [TH=4906] libmondo-tools.c->reset_bkpinfo#955: Hi root is mounted at /dev/root No, Schlomo, that doesn't mean /dev/root is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [TH=4906] libmondo-devices.c->am_I_in_disaster_recovery_mode#364: Is this a ramdisk? result = 1 root is mounted at /dev/root No, Schlomo, that doesn't mean /dev/root is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [TH=4906] libmondo-devices.c->am_I_in_disaster_recovery_mode#364: Is this a ramdisk? result = 1 running: mount / -o remount,rw > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-tools.c->get_kernel_version#395: g_kernel_version = 2.620000 [Main] mondo-restore.c->main#2957: FYI - g_mountlist_fname = /tmp/mountlist.txt running: cp -f /tmp/mountlist.txt /tmp/mountlist.txt.orig > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: mkdir -p /tmp/tmpfs/mondo.tmp.17767 > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: umount /mnt/cdrom > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: rm -Rf /tmp/tmpfs/mondo.tmp.* > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-tools.c->do_libmondo_global_strings_thing#1579: libmondo-tools.c, do_libmondo_global_strings_thing, 1579: Malloc'ing globals -------------- Mondo Restore v2.2.3-1355 ------------- DON'T PANIC! Mondorestore logs almost everything, so please don't break out in a cold sweat just because you see a few error messages in the log. Read them; analyze them; see if they are significant; above all, verify your backups! Please attach a compressed copy of this log to any e-mail you send to the Mondo mailing list when you are seeking technical support. Without it, we can't help you. - DevTeam ------------------------------------------------------------ BTW, despite (or perhaps because of) the wealth of messages, some users are inclined to stop reading this log. If Mondo stopped for some reason, chances are it's detailed here. More than likely there's a message at the very end of this log that will tell you what is wrong. Please read it! ------------------------------------------------------------ [Main] mondo-restore.c->main#2995: I am in disaster recovery mode [Main] mondo-restore.c->main#3000: mondo-restore.c, main, 3000: what time is it [Main] mondo-restore.c->main#3158: I must be in disaster recovery mode. [Main] mondo-restore.c->main#3159: FYI, MOUNTLIST_FNAME = /tmp/mountlist.txt [Main] mondo-restore.c->main#3165: mondo-restore.c, main, 3165: About to call load_mountlist and load_raidtab [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#1095: Backup medium is CD-R[W] [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#1128: Internal tape block size has been custom-set to 32768 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#1167: differential var = '0' [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#1171: This is a regular (full) backup [Main] libmondo-mountlist.c->load_mountlist#957: Loading mountlist... [Main] libmondo-mountlist.c->load_mountlist#1030: /dev/sda2 / ext3 10241437 / [Main] libmondo-mountlist.c->load_mountlist#1030: /dev/sda1 /boot ext3 522081 /boot [Main] libmondo-mountlist.c->load_mountlist#1030: /dev/sda6 /opt/kerio ext3 64741918 /opt/kerio [Main] libmondo-mountlist.c->load_mountlist#1030: /dev/sda5 /tmp ext3 522081 /tmp [Main] libmondo-mountlist.c->load_mountlist#1030: /dev/sda3 swap swap 2096472 SWAP-sda3 [Main] libmondo-mountlist.c->load_mountlist#1038: Mountlist loaded successfully. [Main] libmondo-mountlist.c->load_mountlist#1040: 5 entries in mountlist [Main] libmondo-files.c->length_of_file#608: filename=/etc/raidtab libmondo-files.c, line 609: Unable to openin filename (No such file or directory) [Main] libmondo-raid.c->load_raidtab_into_raidlist#647: Raidtab is very small or non-existent. Ignoring it. [Main] mondo-restore.c->main#3171: mondo-restore.c, main, 3171: Returned from calling load_mountlist and load_raidtab successfully [Main] mondo-restore.c->main#3194: Send in the clowns. [Main] mondo-restore.c->main#3228: mondo-restore.c, main, 3228: catchall [Main] mondo-restore.c->catchall_mode#268: mondo-restore.c, catchall_mode, 268: inside catchall [Main] mondo-restore.c->catchall_mode#273: mondo-restore.c, catchall_mode, 273: pre wrm [Main] mondo-restore.c->catchall_mode#275: mondo-restore.c, catchall_mode, 275: post wrm No restoring or comparing will take place today. [Main] libmondo-devices.c->is_this_device_mounted#1509: Is /mnt/cdrom mounted? [Main] libmondo-devices.c->is_this_device_mounted#1535: tmp (command) = 'cat /proc/swaps | grep -E "^/mnt/cdrom " > /dev/null 2> /dev/null' [Main] libmondo-files.c->register_pid#812: Unregistering PID running: umount /mnt/cdrom > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- umount: Couldn't umount /mnt/cdrom: Invalid argument --------------------------------end of output------------------------------ ...ran with res=256 running: rm -Rf /mondo.scratch.* /tmp.mondo.* > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-fork.c->run_program_and_log_output#330: Warning - asked to run zerolength program [Main] newt-specific.c->finish#497: Calling newtFinished() [Main] libmondo-tools.c->do_libmondo_global_strings_thing#1587: libmondo-tools.c, do_libmondo_global_strings_thing, 1587: Freeing globals [TH=5077] libmondo-tools.c->do_libmondo_global_strings_thing#1579: libmondo-tools.c, do_libmondo_global_strings_thing, 1579: Malloc'ing globals running: mkdir -p /mnt/cdrom > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: mkdir -p /mnt/floppy > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [TH=5077] libmondo-tools.c->reset_bkpinfo#955: Hi root is mounted at /dev/root No, Schlomo, that doesn't mean /dev/root is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [TH=5077] libmondo-devices.c->am_I_in_disaster_recovery_mode#364: Is this a ramdisk? result = 1 root is mounted at /dev/root No, Schlomo, that doesn't mean /dev/root is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [TH=5077] libmondo-devices.c->am_I_in_disaster_recovery_mode#364: Is this a ramdisk? result = 1 running: mount / -o remount,rw > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-tools.c->get_kernel_version#395: g_kernel_version = 2.620000 [Main] mondo-restore.c->main#2957: FYI - g_mountlist_fname = /tmp/mountlist.txt running: mkdir -p /tmp/tmpfs/mondo.tmp.17767 > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: umount /mnt/cdrom > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- umount: Couldn't umount /mnt/cdrom: Invalid argument --------------------------------end of output------------------------------ ...ran with res=256 running: rm -Rf /tmp/tmpfs/mondo.tmp.* > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-tools.c->do_libmondo_global_strings_thing#1579: libmondo-tools.c, do_libmondo_global_strings_thing, 1579: Malloc'ing globals -------------- Mondo Restore v2.2.3-1355 ------------- DON'T PANIC! Mondorestore logs almost everything, so please don't break out in a cold sweat just because you see a few error messages in the log. Read them; analyze them; see if they are significant; above all, verify your backups! Please attach a compressed copy of this log to any e-mail you send to the Mondo mailing list when you are seeking technical support. Without it, we can't help you. - DevTeam ------------------------------------------------------------ BTW, despite (or perhaps because of) the wealth of messages, some users are inclined to stop reading this log. If Mondo stopped for some reason, chances are it's detailed here. More than likely there's a message at the very end of this log that will tell you what is wrong. Please read it! ------------------------------------------------------------ [Main] mondo-restore.c->main#2995: I am in disaster recovery mode [Main] mondo-restore.c->main#3000: mondo-restore.c, main, 3000: what time is it [Main] mondo-restore.c->main#3158: I must be in disaster recovery mode. [Main] mondo-restore.c->main#3159: FYI, MOUNTLIST_FNAME = /tmp/mountlist.txt [Main] mondo-restore.c->main#3165: mondo-restore.c, main, 3165: About to call load_mountlist and load_raidtab [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#1095: Backup medium is CD-R[W] [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#1128: Internal tape block size has been custom-set to 32768 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#1167: differential var = '0' [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#1171: This is a regular (full) backup [Main] libmondo-mountlist.c->load_mountlist#957: Loading mountlist... [Main] libmondo-mountlist.c->load_mountlist#1030: /dev/sda2 / ext3 10241437 / [Main] libmondo-mountlist.c->load_mountlist#1030: /dev/sda1 /boot ext3 522081 /boot [Main] libmondo-mountlist.c->load_mountlist#1030: /dev/sda6 /opt/kerio ext3 64741918 /opt/kerio [Main] libmondo-mountlist.c->load_mountlist#1030: /dev/sda5 /tmp ext3 522081 /tmp [Main] libmondo-mountlist.c->load_mountlist#1030: /dev/sda3 swap swap 2096472 SWAP-sda3 [Main] libmondo-mountlist.c->load_mountlist#1038: Mountlist loaded successfully. [Main] libmondo-mountlist.c->load_mountlist#1040: 5 entries in mountlist [Main] libmondo-files.c->length_of_file#608: filename=/etc/raidtab libmondo-files.c, line 609: Unable to openin filename (No such file or directory) [Main] libmondo-raid.c->load_raidtab_into_raidlist#647: Raidtab is very small or non-existent. Ignoring it. [Main] mondo-restore.c->main#3171: mondo-restore.c, main, 3171: Returned from calling load_mountlist and load_raidtab successfully [Main] mondo-restore.c->main#3194: Send in the clowns. [Main] mondo-restore.c->main#3253: mondo-restore.c, main, 3253: catchall (no mode specified in command-line call [Main] mondo-restore.c->catchall_mode#268: mondo-restore.c, catchall_mode, 268: inside catchall [Main] mondo-restore.c->catchall_mode#273: mondo-restore.c, catchall_mode, 273: pre wrm [Main] mondo-restore.c->catchall_mode#275: mondo-restore.c, catchall_mode, 275: post wrm [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#1851: media type = cdr [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#1919: CD-ROM device assumed to be at /dev/cdrom [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2368: isodir = / [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2369: nfs_mount = '' [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2372: media device = /dev/cdrom [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2373: media size = 2046976 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2375: media type = cdr [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2376: prefix = mondorescue [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2377: compression = 5 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2378: include_paths = '/' [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2379: exclude_paths = '' [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2380: scratchdir = '' [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2381: tmpdir = '/tmp/tmpfs/mondo.tmp.17767' [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2383: boot_device = '' (loader=) [Main] mondo-restore.c->catchall_mode#290: mondo-restore.c, catchall_mode, 290: post int [Main] mondo-restore.c->catchall_mode#309: CM selected [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2385: gcffa --- starting I'm thinking... running: mkdir -p /tmp/tmpfs/mondo.tmp.17767/mount.bootdisk > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2405: mountpt = /tmp/tmpfs/mondo.tmp.17767/mount.bootdisk; cfg_file=/tmp/tmpfs/mondo.tmp.17767/tmp/mondo-restore.cfg running: mkdir -p /tmp/tmpfs/mondo.tmp.17767/mount.bootdisk > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: mkdir -p /tmp/tmpfs/mondo.tmp.17767/tmp > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2417: tmp = '(sleep 15; kill `ps | grep "mount /dev/fd0u1722 /tmp/tmpfs/mondo.tmp.17767/mount.bootdisk" | cut -d' ' -f1` 2> /dev/null) &' running: mount /dev/fd0u1722 /tmp/tmpfs/mondo.tmp.17767/mount.bootdisk > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- mount: you must specify the filesystem type --------------------------------end of output------------------------------ ...ran with res=8192 running: mount /dev/fd0H1440 /tmp/tmpfs/mondo.tmp.17767/mount.bootdisk > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- mount: you must specify the filesystem type --------------------------------end of output------------------------------ ...ran with res=8192 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2450: gcffa --- we don't have cfg file yet. [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2454: gcffa --- calling mount_cdrom now :) running: mount | grep -F /mnt/cdrom > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 [Main] mondo-rstr-tools.c->mount_cdrom#794: (mount_cdrom) --- command = mount /dev/cdrom -t iso9660 -o ro /mnt/cdrom running: mount /dev/cdrom -t iso9660 -o ro /mnt/cdrom > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->mount_cdrom#808: Mounted CD-ROM drive OK [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2457: gcffa --- managed to mount CD; so, no need for Plan B [Main] libmondo-devices.c->is_this_device_mounted#1509: Is /mnt/cdrom mounted? [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2502: gcffa --- looking at mounted CD for mindi-boot.2880.img [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2509: gcffa --- Plan C, a.k.a. untarring some file from all.tar.gz running: tar -zxvf /mnt/cdrom/images/all.tar.gz tmp/mountlist.txt tmp/mondo-restore.cfg tmp/biggielist.txt tmp/filelist.full.gz tmp/i-want-my-lvm > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- tmp/biggielist.txt tmp/i-want-my-lvm tmp/mondo-restore.cfg tmp/mountlist.txt tmp/filelist.full.gz --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2520: gcffa --- great! We've got the config file [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2525: mondo-rstr-tools.c, get_cfg_file_from_archive, 2525: cp -f //tmp/mondo-restore.cfg /tmp/tmpfs/mondo.tmp.17767/tmp/mondo-restore.cfg running: cp -f //tmp/mondo-restore.cfg /tmp/tmpfs/mondo.tmp.17767/tmp/mondo-restore.cfg > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2532: ... and I moved it successfully to /tmp/tmpfs/mondo.tmp.17767/tmp/mondo-restore.cfg [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2537: mondo-rstr-tools.c, get_cfg_file_from_archive, 2537: cp -f //tmp/mountlist.txt /tmp/tmpfs/mondo.tmp.17767/tmp/mountlist.txt running: cp -f //tmp/mountlist.txt /tmp/tmpfs/mondo.tmp.17767/tmp/mountlist.txt > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2542: Got mountlist too running: cp -f /tmp/tmpfs/mondo.tmp.17767/tmp/mountlist.txt /tmp/mountlist.txt > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2548: Copied mountlist to /tmp as well OK running: cp -f tmp/i-want-my-lvm /tmp/ > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- cp: `tmp/i-want-my-lvm' and `/tmp/i-want-my-lvm' are the same file --------------------------------end of output------------------------------ ...ran with res=256 running: umount /mnt/cdrom > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) Recovered mondo-restore.cfg running: cp -f tmp/mountlist.txt /tmp/tmpfs/mondo.tmp.17767/tmp/mountlist.txt > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: cp -f /tmp/tmpfs/mondo.tmp.17767/tmp/mondo-restore.cfg /tmp/mondo-restore.cfg > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: cp -f /tmp/tmpfs/mondo.tmp.17767/tmp/mountlist.txt /tmp/mountlist.txt > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) running: cp -f etc/raidtab /etc/ > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- cp: etc/raidtab: No such file or directory --------------------------------end of output------------------------------ ...ran with res=256 running: cp -f tmp/i-want-my-lvm /tmp/ > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- cp: `tmp/i-want-my-lvm' and `/tmp/i-want-my-lvm' are the same file --------------------------------end of output------------------------------ ...ran with res=256 root is mounted at /dev/root No, Schlomo, that doesn't mean /dev/root is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [Main] libmondo-devices.c->am_I_in_disaster_recovery_mode#364: Is this a ramdisk? result = 1 [Main] libmondo-devices.c->is_this_device_mounted#1509: Is /dev/cdrom mounted? [Main] libmondo-devices.c->is_this_device_mounted#1535: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cdrom " > /dev/null 2> /dev/null' [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#1030: NB: CDROM device not mounted, mounting... running: mount /dev/cdrom /mnt/cdrom > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- mount: block device /dev/cdrom is write-protected, mounting read-only --------------------------------end of output------------------------------ ...ran just fine. :-) running: umount /mnt/cdrom > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#1038: Re-jigging configuration AGAIN. CD-R, not ISO. [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#1095: Backup medium is CD-R[W] [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#1128: Internal tape block size has been custom-set to 32768 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#1167: differential var = '0' [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#1171: This is a regular (full) backup Comparing Automatically [Main] mondo-rstr-compare.c->compare_mode#614: mondo-rstr-compare.c, compare_mode, 614: Pre-MAD Mounting devices [Main] libmondo-devices.c->is_this_device_mounted#1509: Is /dev/sda2 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1535: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda2 " > /dev/null 2> /dev/null' [Main] mondo-rstr-tools.c->mount_device#861: Mounting device /dev/sda2 [Main] libmondo-files.c->find_home_of_exe#431: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr [Main] libmondo-files.c->find_home_of_exe#431: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl running: mkdir -p /mnt/RESTORING > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->mount_device#886: command='mount -t ext2 /dev/sda2 -o ro,user_xattr,acl /mnt/RESTORING 2>> /tmp/mondorestore.log' running: mount -t ext2 /dev/sda2 -o ro,user_xattr,acl /mnt/RESTORING 2>> /tmp/mondorestore.log > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-devices.c->is_this_device_mounted#1509: Is /dev/sda1 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1535: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda1 " > /dev/null 2> /dev/null' [Main] mondo-rstr-tools.c->mount_device#861: Mounting device /dev/sda1 [Main] libmondo-files.c->find_home_of_exe#431: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr [Main] libmondo-files.c->find_home_of_exe#431: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl running: mkdir -p /mnt/RESTORING/boot > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- mkdir: Cannot create directory `/mnt/RESTORING/boot': Read-only file system --------------------------------end of output------------------------------ ...ran with res=256 [Main] mondo-rstr-tools.c->mount_device#886: command='mount -t ext2 /dev/sda1 -o ro,user_xattr,acl /mnt/RESTORING/boot 2>> /tmp/mondorestore.log' running: mount -t ext2 /dev/sda1 -o ro,user_xattr,acl /mnt/RESTORING/boot 2>> /tmp/mondorestore.log > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- mount: mount point /mnt/RESTORING/boot does not exist --------------------------------end of output------------------------------ ...ran with res=8192 [Main] mondo-rstr-tools.c->mount_device#890: Re-trying without the fancy extra parameters running: mount -t ext2 /dev/sda1 /mnt/RESTORING/boot 2>> /tmp/mondorestore.log > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- mount: mount point /mnt/RESTORING/boot does not exist --------------------------------end of output------------------------------ ...ran with res=8192 [Main] mondo-rstr-tools.c->mount_device#897: Unable to mount device /dev/sda1 (type ext2) at /mnt/RESTORING/boot [Main] mondo-rstr-tools.c->mount_device#898: command was 'mount -t ext2 /dev/sda1 /mnt/RESTORING/boot 2>> /tmp/mondorestore.log' [Main] mondo-rstr-tools.c->mount_device#902: Retrying w/o the '-t' switch [Main] mondo-rstr-tools.c->mount_device#905: 2nd command = 'mount /dev/sda1 /mnt/RESTORING/boot 2>> /tmp/mondorestore.log' running: mount /dev/sda1 /mnt/RESTORING/boot 2>> /tmp/mondorestore.log > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- mount: mount point /mnt/RESTORING/boot does not exist --------------------------------end of output------------------------------ ...ran with res=8192 Mounting device /dev/sda1 [Main] libmondo-devices.c->is_this_device_mounted#1509: Is /dev/sda6 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1535: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda6 " > /dev/null 2> /dev/null' [Main] mondo-rstr-tools.c->mount_device#861: Mounting device /dev/sda6 [Main] libmondo-files.c->find_home_of_exe#431: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr [Main] libmondo-files.c->find_home_of_exe#431: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl running: mkdir -p /mnt/RESTORING/opt/kerio > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- mkdir: Cannot create directory `/mnt/RESTORING/opt/': Read-only file system --------------------------------end of output------------------------------ ...ran with res=256 [Main] mondo-rstr-tools.c->mount_device#886: command='mount -t ext2 /dev/sda6 -o ro,user_xattr,acl /mnt/RESTORING/opt/kerio 2>> /tmp/mondorestore.log' running: mount -t ext2 /dev/sda6 -o ro,user_xattr,acl /mnt/RESTORING/opt/kerio 2>> /tmp/mondorestore.log > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- mount: mount point /mnt/RESTORING/opt/kerio does not exist --------------------------------end of output------------------------------ ...ran with res=8192 [Main] mondo-rstr-tools.c->mount_device#890: Re-trying without the fancy extra parameters running: mount -t ext2 /dev/sda6 /mnt/RESTORING/opt/kerio 2>> /tmp/mondorestore.log > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- mount: mount point /mnt/RESTORING/opt/kerio does not exist --------------------------------end of output------------------------------ ...ran with res=8192 [Main] mondo-rstr-tools.c->mount_device#897: Unable to mount device /dev/sda6 (type ext2) at /mnt/RESTORING/opt/kerio [Main] mondo-rstr-tools.c->mount_device#898: command was 'mount -t ext2 /dev/sda6 /mnt/RESTORING/opt/kerio 2>> /tmp/mondorestore.log' [Main] mondo-rstr-tools.c->mount_device#902: Retrying w/o the '-t' switch [Main] mondo-rstr-tools.c->mount_device#905: 2nd command = 'mount /dev/sda6 /mnt/RESTORING/opt/kerio 2>> /tmp/mondorestore.log' running: mount /dev/sda6 /mnt/RESTORING/opt/kerio 2>> /tmp/mondorestore.log > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- mount: you must specify the filesystem type --------------------------------end of output------------------------------ ...ran with res=8192 Mounting device /dev/sda6 [Main] libmondo-devices.c->is_this_device_mounted#1509: Is /dev/sda5 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1535: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda5 " > /dev/null 2> /dev/null' [Main] mondo-rstr-tools.c->mount_device#861: Mounting device /dev/sda5 [Main] libmondo-files.c->find_home_of_exe#431: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr [Main] libmondo-files.c->find_home_of_exe#431: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl running: mkdir -p /mnt/RESTORING/tmp > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- mkdir: Cannot create directory `/mnt/RESTORING/tmp': Read-only file system --------------------------------end of output------------------------------ ...ran with res=256 [Main] mondo-rstr-tools.c->mount_device#886: command='mount -t ext2 /dev/sda5 -o ro,user_xattr,acl /mnt/RESTORING/tmp 2>> /tmp/mondorestore.log' running: mount -t ext2 /dev/sda5 -o ro,user_xattr,acl /mnt/RESTORING/tmp 2>> /tmp/mondorestore.log > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- mount: mount point /mnt/RESTORING/tmp does not exist --------------------------------end of output------------------------------ ...ran with res=8192 [Main] mondo-rstr-tools.c->mount_device#890: Re-trying without the fancy extra parameters running: mount -t ext2 /dev/sda5 /mnt/RESTORING/tmp 2>> /tmp/mondorestore.log > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- mount: mount point /mnt/RESTORING/tmp does not exist --------------------------------end of output------------------------------ ...ran with res=8192 [Main] mondo-rstr-tools.c->mount_device#897: Unable to mount device /dev/sda5 (type ext2) at /mnt/RESTORING/tmp [Main] mondo-rstr-tools.c->mount_device#898: command was 'mount -t ext2 /dev/sda5 /mnt/RESTORING/tmp 2>> /tmp/mondorestore.log' [Main] mondo-rstr-tools.c->mount_device#902: Retrying w/o the '-t' switch [Main] mondo-rstr-tools.c->mount_device#905: 2nd command = 'mount /dev/sda5 /mnt/RESTORING/tmp 2>> /tmp/mondorestore.log' running: mount /dev/sda5 /mnt/RESTORING/tmp 2>> /tmp/mondorestore.log > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- mount: you must specify the filesystem type --------------------------------end of output------------------------------ ...ran with res=8192 Mounting device /dev/sda5 [Main] libmondo-devices.c->is_this_device_mounted#1509: Is /dev/sda3 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1535: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda3 " > /dev/null 2> /dev/null' [Main] mondo-rstr-tools.c->mount_device#861: Mounting device /dev/sda3 [Main] libmondo-files.c->find_home_of_exe#431: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr [Main] libmondo-files.c->find_home_of_exe#431: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl running: swapon /dev/sda3 > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- swapon: /dev/sda3: Invalid argument --------------------------------end of output------------------------------ ...ran with res=256 [Main] mondo-rstr-tools.c->mount_device#897: Unable to mount device /dev/sda3 (type swap) at [Main] mondo-rstr-tools.c->mount_device#898: command was 'swapon /dev/sda3' Mounting device /dev/sda3 [Main] mondo-rstr-tools.c->mount_device#916: That's ok. It's just a swap partition. [Main] mondo-rstr-tools.c->mount_device#917: Non-fatal error. Returning 0. running: df -m > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- Filesystem 1M-blocks Used Available Use Mounted on /dev/ram0 37 18 19 50 / /dev/shm 64 1 63 1 /tmp /dev/sda2 9852 150 9202 2 /mnt/RESTORING --------------------------------end of output------------------------------ ...ran just fine. :-) Failed. Unable to mount some or all of your partitions. running: df -m > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- Filesystem 1M-blocks Used Available Use Mounted on /dev/ram0 37 18 19 50 / /dev/shm 64 1 63 1 /tmp /dev/sda2 9852 150 9202 2 /mnt/RESTORING --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-compare.c->compare_mode#616: mondo-rstr-compare.c, compare_mode, 616: Post-MAD running: df -m > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- Filesystem 1M-blocks Used Available Use Mounted on /dev/ram0 37 18 19 50 / /dev/shm 64 1 63 1 /tmp /dev/sda2 9852 150 9202 2 /mnt/RESTORING --------------------------------end of output------------------------------ ...ran just fine. :-) Unmounting devices running: ps | grep buffer | grep -v "grep buffer" > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 running: cp -f /tmp/mondorestore.log /mnt/RESTORING/var/log > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- cp: unable to open `/mnt/RESTORING/var/log': No such file or directory --------------------------------end of output------------------------------ ...ran with res=256 [Main] mondo-rstr-tools.c->unmount_all_devices#2253: Error. Failed to copy log to PC's /var/log dir. (Mounted read-only?) [Main] libmondo-devices.c->is_this_device_mounted#1509: Is /dev/sda3 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1535: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda3 " > /dev/null 2> /dev/null' [Main] mondo-rstr-tools.c->unmount_all_devices#2291: Unmounting device /dev/sda3 ...not mounted anyway :-) OK [Main] libmondo-devices.c->is_this_device_mounted#1509: Is /dev/sda5 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1535: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda5 " > /dev/null 2> /dev/null' [Main] mondo-rstr-tools.c->unmount_all_devices#2291: Unmounting device /dev/sda5 ...not mounted anyway :-) OK [Main] libmondo-devices.c->is_this_device_mounted#1509: Is /dev/sda6 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1535: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda6 " > /dev/null 2> /dev/null' [Main] mondo-rstr-tools.c->unmount_all_devices#2291: Unmounting device /dev/sda6 ...not mounted anyway :-) OK [Main] libmondo-devices.c->is_this_device_mounted#1509: Is /dev/sda1 mounted? [Main] libmondo-devices.c->is_this_device_mounted#1535: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda1 " > /dev/null 2> /dev/null' [Main] mondo-rstr-tools.c->unmount_all_devices#2291: Unmounting device /dev/sda1 ...not mounted anyway :-) OK [Main] libmondo-devices.c->is_this_device_mounted#1509: Is /dev/sda2 mounted? running: umount /mnt/RESTORING/ > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] mondo-rstr-tools.c->unmount_all_devices#2291: Unmounting device /dev/sda2 Done. All partitions were unmounted OK. Run complete. Errors were reported. Please review the logfile. [Main] mondo-restore.c->main#3310: No post-nuke found. running: rm -Rf /tmp/tmpfs/mondo.tmp.17767 > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) Restore log (/tmp/mondorestore.log) copied to /var/log on your hard disk Mondo-restore is exiting (retval=24576) root is mounted at /dev/root No, Schlomo, that doesn't mean /dev/root is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode(). [Main] libmondo-devices.c->am_I_in_disaster_recovery_mode#364: Is this a ramdisk? result = 1 running: mount / -o remount,rw > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-files.c->register_pid#812: Unregistering PID running: umount /mnt/cdrom > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- umount: Couldn't umount /mnt/cdrom: Invalid argument --------------------------------end of output------------------------------ ...ran with res=256 running: rm -Rf /mondo.scratch.* /tmp.mondo.* > /tmp/mondo-run-prog-thing.tmp 2> /tmp/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) [Main] libmondo-fork.c->run_program_and_log_output#330: Warning - asked to run zerolength program [Main] newt-specific.c->finish#497: Calling newtFinished() [Main] libmondo-tools.c->do_libmondo_global_strings_thing#1587: libmondo-tools.c, do_libmondo_global_strings_thing, 1587: Freeing globals