/* DO NOT EDIT. This file is generated from usage.src.h */ /* vi: set sw=8 ts=8: */ /* * This file suffers from chronically incorrect tabification * of messages. Before editing this file: * 1. Switch you editor to 8-space tab mode. * 2. Do not use \t in messages, use real tab character. * 3. Start each source line with message as follows: * |<7 spaces>"text with tabs".... * or * |<5 spaces>"\ntext with tabs".... */ #ifndef BB_USAGE_H #define BB_USAGE_H 1 #define NOUSAGE_STR "\b" #define ar_trivial_usage \ "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES" \ #define ar_full_usage "\n\n" \ "Extract or list FILES from an ar archive\n" \ "\n -o Preserve original dates" \ "\n -p Extract to stdout" \ "\n -t List" \ "\n -x Extract" \ "\n -v Verbose" \ #define uncompress_trivial_usage \ "[-cf] [FILE]..." \ #define uncompress_full_usage "\n\n" \ "Decompress .Z file[s]\n" \ "\n -c Write to stdout" \ "\n -f Overwrite" \ #define gunzip_trivial_usage \ "[-cft] [FILE]..." \ #define gunzip_full_usage "\n\n" \ "Decompress FILEs (or stdin)\n" \ "\n -c Write to stdout" \ "\n -f Force" \ "\n -t Test file integrity" \ #define gunzip_example_usage \ "$ ls -la /tmp/BusyBox*\n" \ "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \ "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \ "$ ls -la /tmp/BusyBox*\n" \ "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n" \ #define zcat_trivial_usage \ "FILE" \ #define zcat_full_usage "\n\n" \ "Decompress to stdout" \ #define bunzip2_trivial_usage \ "[-cf] [FILE]..." \ #define bunzip2_full_usage "\n\n" \ "Decompress FILEs (or stdin)\n" \ "\n -c Write to stdout" \ "\n -f Force" \ #define bzcat_trivial_usage \ "FILE" \ #define bzcat_full_usage "\n\n" \ "Decompress to stdout" \ #define unlzma_trivial_usage \ "[-cf] [FILE]..." \ #define unlzma_full_usage "\n\n" \ "Decompress FILE (or stdin)\n" \ "\n -c Write to stdout" \ "\n -f Force" \ #define lzma_trivial_usage \ "-d [-cf] [FILE]..." \ #define lzma_full_usage "\n\n" \ "Decompress FILE (or stdin)\n" \ "\n -d Decompress" \ "\n -c Write to stdout" \ "\n -f Force" \ #define lzcat_trivial_usage \ "FILE" \ #define lzcat_full_usage "\n\n" \ "Decompress to stdout" \ #define unxz_trivial_usage \ "[-cf] [FILE]..." \ #define unxz_full_usage "\n\n" \ "Decompress FILE (or stdin)\n" \ "\n -c Write to stdout" \ "\n -f Force" \ #define xz_trivial_usage \ "-d [-cf] [FILE]..." \ #define xz_full_usage "\n\n" \ "Decompress FILE (or stdin)\n" \ "\n -d Decompress" \ "\n -c Write to stdout" \ "\n -f Force" \ #define xzcat_trivial_usage \ "FILE" \ #define xzcat_full_usage "\n\n" \ "Decompress to stdout" \ #define bzip2_trivial_usage \ "[OPTIONS] [FILE]..." \ #define bzip2_full_usage "\n\n" \ "Compress FILEs (or stdin) with bzip2 algorithm\n" \ "\n -1..9 Compression level" \ "\n -d Decompress" \ "\n -c Write to stdout" \ "\n -f Force" \ #define cpio_trivial_usage \ "[-dmvu] [-F FILE]" IF_FEATURE_CPIO_O(" [-H newc]") \ " [-ti"IF_FEATURE_CPIO_O("o")"]" IF_FEATURE_CPIO_P(" [-p DIR]") \ " [EXTR_FILE]..." \ #define cpio_full_usage "\n\n" \ "Extract or list files from a cpio archive" \ IF_FEATURE_CPIO_O(", or" \ "\ncreate an archive" IF_FEATURE_CPIO_P(" (-o) or copy files (-p)") \ " using file list on stdin" \ ) \ "\n" \ "\nMain operation mode:" \ "\n -t List" \ "\n -i Extract EXTR_FILEs (or all)" \ IF_FEATURE_CPIO_O( \ "\n -o Create (requires -H newc)" \ ) \ IF_FEATURE_CPIO_P( \ "\n -p DIR Copy files to DIR" \ ) \ "\n -d Make leading directories" \ "\n -m Preserve mtime" \ "\n -v Verbose" \ "\n -u Overwrite" \ "\n -F FILE Input (-t,-i,-p) or output (-o) file" \ IF_FEATURE_CPIO_O( \ "\n -H newc Archive format" \ ) \ #define dpkg_trivial_usage \ "[-ilCPru] [-F OPT] PACKAGE" \ #define dpkg_full_usage "\n\n" \ "Install, remove and manage Debian packages\n" \ IF_LONG_OPTS( \ "\n -i,--install Install the package" \ "\n -l,--list List of installed packages" \ "\n --configure Configure an unpackaged package" \ "\n -P,--purge Purge all files of a package" \ "\n -r,--remove Remove all but the configuration files for a package" \ "\n --unpack Unpack a package, but don't configure it" \ "\n --force-depends Ignore dependency problems" \ "\n --force-confnew Overwrite existing config files when installing" \ "\n --force-confold Keep old config files when installing" \ ) \ IF_NOT_LONG_OPTS( \ "\n -i Install the package" \ "\n -l List of installed packages" \ "\n -C Configure an unpackaged package" \ "\n -P Purge all files of a package" \ "\n -r Remove all but the configuration files for a package" \ "\n -u Unpack a package, but don't configure it" \ "\n -F depends Ignore dependency problems" \ "\n -F confnew Overwrite existing config files when installing" \ "\n -F confold Keep old config files when installing" \ ) \ #define dpkg_deb_trivial_usage \ "[-cefxX] FILE [argument" \ #define dpkg_deb_full_usage "\n\n" \ "Perform actions on Debian packages (.debs)\n" \ "\n -c List contents of filesystem tree" \ "\n -e Extract control files to [argument] directory" \ "\n -f Display control field name starting with [argument]" \ "\n -x Extract packages filesystem tree to directory" \ "\n -X Verbose extract" \ #define dpkg_deb_example_usage \ "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n" \ #define gzip_trivial_usage \ "[-cfd] [FILE]..." \ #define gzip_full_usage "\n\n" \ "Compress FILEs (or stdin)\n" \ "\n -d Decompress" \ "\n -c Write to stdout" \ "\n -f Force" \ #define gzip_example_usage \ "$ ls -la /tmp/busybox*\n" \ "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \ "$ gzip /tmp/busybox.tar\n" \ "$ ls -la /tmp/busybox*\n" \ "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n" \ #define lzop_trivial_usage \ "[-cfvd123456789CF] [FILE]..." \ #define lzop_full_usage "\n\n" \ " -1..9 Compression level" \ "\n -d Decompress" \ "\n -c Write to stdout" \ "\n -f Force" \ "\n -v Verbose" \ "\n -F Don't store or verify checksum" \ "\n -C Also write checksum of compressed block" \ #define lzopcat_trivial_usage \ "[-vCF] [FILE]..." \ #define lzopcat_full_usage "\n\n" \ " -v Verbose" \ "\n -F Don't store or verify checksum" \ #define unlzop_trivial_usage \ "[-cfvCF] [FILE]..." \ #define unlzop_full_usage "\n\n" \ " -c Write to stdout" \ "\n -f Force" \ "\n -v Verbose" \ "\n -F Don't store or verify checksum" \ #define rpm2cpio_trivial_usage \ "package.rpm" \ #define rpm2cpio_full_usage "\n\n" \ "Output a cpio archive of the rpm file" \ #define rpm_trivial_usage \ "-i PACKAGE.rpm; rpm -qp[ildc] PACKAGE.rpm" \ #define rpm_full_usage "\n\n" \ "Manipulate RPM packages\n" \ "\nCommands:" \ "\n -i Install package" \ "\n -qp Query package" \ "\n -i Show information" \ "\n -l List contents" \ "\n -d List documents" \ "\n -c List config files" \ #define tar_trivial_usage \ "-[" IF_FEATURE_TAR_CREATE("c") "xt" \ IF_FEATURE_SEAMLESS_Z("Z") \ IF_FEATURE_SEAMLESS_GZ("z") \ IF_FEATURE_SEAMLESS_XZ("J") \ IF_FEATURE_SEAMLESS_BZ2("j") \ IF_FEATURE_SEAMLESS_LZMA("a") \ IF_FEATURE_TAR_CREATE("h") \ IF_FEATURE_TAR_NOPRESERVE_TIME("m") \ "vO] " \ IF_FEATURE_TAR_FROM("[-X FILE] [-T FILE] ") \ "[-f TARFILE] [-C DIR] [FILE]..." \ #define tar_full_usage "\n\n" \ IF_FEATURE_TAR_CREATE("Create, extract, ") \ IF_NOT_FEATURE_TAR_CREATE("Extract ") \ "or list files from a tar file\n" \ "\nOperation:" \ IF_FEATURE_TAR_CREATE( \ "\n c Create" \ ) \ "\n x Extract" \ "\n t List" \ "\n f Name of TARFILE ('-' for stdin/out)" \ "\n C Change to DIR before operation" \ "\n v Verbose" \ IF_FEATURE_SEAMLESS_Z( \ "\n Z (De)compress using compress" \ ) \ IF_FEATURE_SEAMLESS_GZ( \ "\n z (De)compress using gzip" \ ) \ IF_FEATURE_SEAMLESS_XZ( \ "\n J (De)compress using xz" \ ) \ IF_FEATURE_SEAMLESS_BZ2( \ "\n j (De)compress using bzip2" \ ) \ IF_FEATURE_SEAMLESS_LZMA( \ "\n a (De)compress using lzma" \ ) \ "\n O Extract to stdout" \ IF_FEATURE_TAR_CREATE( \ "\n h Follow symlinks" \ ) \ IF_FEATURE_TAR_NOPRESERVE_TIME( \ "\n m Don't restore mtime" \ ) \ IF_FEATURE_TAR_FROM( \ IF_FEATURE_TAR_LONG_OPTIONS( \ "\n exclude File to exclude" \ ) \ "\n X File with names to exclude" \ "\n T File with names to include" \ ) \ #define tar_example_usage \ "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \ "$ tar -cf /tmp/tarball.tar /usr/local\n" \ #define unzip_trivial_usage \ "[-lnopq] FILE[.zip] [FILE]... [-x FILE...] [-d DIR]" \ #define unzip_full_usage "\n\n" \ "Extract FILEs from ZIP archive\n" \ "\n -l List contents (with -q for short form)" \ "\n -n Never overwrite files (default: ask)" \ "\n -o Overwrite" \ "\n -p Print to stdout" \ "\n -q Quiet" \ "\n -x FILE Exclude FILEs" \ "\n -d DIR Extract into DIR" \ #define chvt_trivial_usage \ "N" \ #define chvt_full_usage "\n\n" \ "Change the foreground virtual terminal to /dev/ttyN" \ #define clear_trivial_usage \ "" \ #define clear_full_usage "\n\n" \ "Clear screen" \ #define deallocvt_trivial_usage \ "[N]" \ #define deallocvt_full_usage "\n\n" \ "Deallocate unused virtual terminal /dev/ttyN" \ #define dumpkmap_trivial_usage \ "> keymap" \ #define dumpkmap_full_usage "\n\n" \ "Print a binary keyboard translation table to stdout" \ #define dumpkmap_example_usage \ "$ dumpkmap > keymap\n" \ #define fgconsole_trivial_usage \ "" \ #define fgconsole_full_usage "\n\n" \ "Get active console" \ #define kbd_mode_trivial_usage \ "[-a|k|s|u] [-C TTY]" \ #define kbd_mode_full_usage "\n\n" \ "Report or set the keyboard mode\n" \ "\n -a Default (ASCII)" \ "\n -k Medium-raw (keyboard)" \ "\n -s Raw (scancode)" \ "\n -u Unicode (utf-8)" \ "\n -C TTY Affect TTY instead of /dev/tty" \ #define loadfont_trivial_usage \ "< font" \ #define loadfont_full_usage "\n\n" \ "Load a console font from stdin" \ #define loadfont_example_usage \ "$ loadfont < /etc/i18n/fontname\n" \ #define setfont_trivial_usage \ "FONT [-m MAPFILE] [-C TTY]" \ #define setfont_full_usage "\n\n" \ "Load a console font\n" \ "\n -m MAPFILE Load console screen map" \ "\n -C TTY Affect TTY instead of /dev/tty" \ #define setfont_example_usage \ "$ setfont -m koi8-r /etc/i18n/fontname\n" \ #define loadkmap_trivial_usage \ "< keymap" \ #define loadkmap_full_usage "\n\n" \ "Load a binary keyboard translation table from stdin\n" \ #define loadkmap_example_usage \ "$ loadkmap < /etc/i18n/lang-keymap\n" \ #define openvt_trivial_usage \ "[-c N] [-sw] [PROG ARGS]" \ #define openvt_full_usage "\n\n" \ "Start PROG on a new virtual terminal\n" \ "\n -c N Use specified VT" \ "\n -s Switch to the VT" \ "\n -w Wait for PROG to exit" \ #define openvt_example_usage \ "openvt 2 /bin/ash\n" \ #define reset_trivial_usage \ "" \ #define reset_full_usage "\n\n" \ "Reset the screen" \ #define resize_trivial_usage \ "" \ #define resize_full_usage "\n\n" \ "Resize the screen" \ #define setconsole_trivial_usage \ "[-r" IF_FEATURE_SETCONSOLE_LONG_OPTIONS("|--reset") "] [DEVICE]" \ #define setconsole_full_usage "\n\n" \ "Redirect system console output to DEVICE (default: /dev/tty)\n" \ "\n -r Reset output to /dev/console" \ #define setkeycodes_trivial_usage \ "SCANCODE KEYCODE..." \ #define setkeycodes_full_usage "\n\n" \ "Set entries into the kernel's scancode-to-keycode map,\n" \ "allowing unusual keyboards to generate usable keycodes.\n\n" \ "SCANCODE may be either xx or e0xx (hexadecimal),\n" \ "and KEYCODE is given in decimal." \ #define setkeycodes_example_usage \ "$ setkeycodes e030 127\n" \ #define setlogcons_trivial_usage \ "N" \ #define setlogcons_full_usage "\n\n" \ "Redirect the kernel output to console N (0 for current)" \ #define showkey_trivial_usage \ "[-a | -k | -s]" \ #define showkey_full_usage "\n\n" \ "Show keys pressed\n" \ "\n -a Display decimal/octal/hex values of the keys" \ "\n -k Display interpreted keycodes (default)" \ "\n -s Display raw scan-codes" \ #define basename_trivial_usage \ "FILE [SUFFIX]" \ #define basename_full_usage "\n\n" \ "Strip directory path and .SUFFIX from FILE\n" \ #define basename_example_usage \ "$ basename /usr/local/bin/foo\n" \ "foo\n" \ "$ basename /usr/local/bin/\n" \ "bin\n" \ "$ basename /foo/bar.txt .txt\n" \ "bar" \ #define cal_trivial_usage \ "[-jy] [[MONTH] YEAR]" \ #define cal_full_usage "\n\n" \ "Display a calendar\n" \ "\n -j Use julian dates" \ "\n -y Display the entire year" \ #define cat_trivial_usage \ "[FILE]..." \ #define cat_full_usage "\n\n" \ "Concatenate FILEs and print them to stdout" \ #define cat_example_usage \ "$ cat /proc/uptime\n" \ "110716.72 17.67" \ #define catv_trivial_usage \ "[-etv] [FILE]..." \ #define catv_full_usage "\n\n" \ "Display nonprinting characters as ^x or M-x\n" \ "\n -e End each line with $" \ "\n -t Show tabs as ^I" \ "\n -v Don't use ^x or M-x escapes" \ #define chgrp_trivial_usage \ "[-RhLHP"IF_DESKTOP("cvf")"]... GROUP FILE..." \ #define chgrp_full_usage "\n\n" \ "Change the group membership of each FILE to GROUP\n" \ "\n -R Recurse" \ "\n -h Affect symlinks instead of symlink targets" \ "\n -L Traverse all symlinks to directories" \ "\n -H Traverse symlinks on command line only" \ "\n -P Don't traverse symlinks (default)" \ IF_DESKTOP( \ "\n -c List changed files" \ "\n -v Verbose" \ "\n -f Hide errors" \ ) \ #define chgrp_example_usage \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \ "$ chgrp root /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n" \ #define chmod_trivial_usage \ "[-R"IF_DESKTOP("cvf")"] MODE[,MODE]... FILE..." \ #define chmod_full_usage "\n\n" \ "Each MODE is one or more of the letters ugoa, one of the\n" \ "symbols +-= and one or more of the letters rwxst\n" \ "\n -R Recurse" \ IF_DESKTOP( \ "\n -c List changed files" \ "\n -v List all files" \ "\n -f Hide errors" \ ) \ #define chmod_example_usage \ "$ ls -l /tmp/foo\n" \ "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \ "$ chmod u+x /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \ "$ chmod 444 /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \ #define chown_trivial_usage \ "[-RhLHP"IF_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..." \ #define chown_full_usage "\n\n" \ "Change the owner and/or group of each FILE to OWNER and/or GROUP\n" \ "\n -R Recurse" \ "\n -h Affect symlinks instead of symlink targets" \ "\n -L Traverse all symlinks to directories" \ "\n -H Traverse symlinks on command line only" \ "\n -P Don't traverse symlinks (default)" \ IF_DESKTOP( \ "\n -c List changed files" \ "\n -v List all files" \ "\n -f Hide errors" \ ) \ #define chown_example_usage \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \ "$ chown root /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \ "$ chown root.root /tmp/foo\n" \ "ls -l /tmp/foo\n" \ "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \ #define chroot_trivial_usage \ "NEWROOT [PROG ARGS]" \ #define chroot_full_usage "\n\n" \ "Run PROG with root directory set to NEWROOT" \ #define chroot_example_usage \ "$ ls -l /bin/ls\n" \ "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \ "# mount /dev/hdc1 /mnt -t minix\n" \ "# chroot /mnt\n" \ "# ls -l /bin/ls\n" \ "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n" \ #define cksum_trivial_usage \ "FILES..." \ #define cksum_full_usage "\n\n" \ "Calculate the CRC32 checksums of FILES" \ #define comm_trivial_usage \ "[-123] FILE1 FILE2" \ #define comm_full_usage "\n\n" \ "Compare FILE1 with FILE2\n" \ "\n -1 Suppress lines unique to FILE1" \ "\n -2 Suppress lines unique to FILE2" \ "\n -3 Suppress lines common to both files" \ #define cp_trivial_usage \ "[OPTIONS] SOURCE... DEST" \ #define cp_full_usage "\n\n" \ "Copy SOURCE(s) to DEST\n" \ "\n -a Same as -dpR" \ IF_SELINUX( \ "\n -c Preserve security context" \ ) \ "\n -R,-r Recurse" \ "\n -d,-P Preserve symlinks (default if -R)" \ "\n -L Follow all symlinks" \ "\n -H Follow symlinks on command line" \ "\n -p Preserve file attributes if possible" \ "\n -f Overwrite" \ "\n -i Prompt before overwrite" \ "\n -l,-s Create (sym)links" \ #define cut_trivial_usage \ "[OPTIONS] [FILE]..." \ #define cut_full_usage "\n\n" \ "Print selected fields from each input FILE to stdout\n" \ "\n -b LIST Output only bytes from LIST" \ "\n -c LIST Output only characters from LIST" \ "\n -d CHAR Use CHAR instead of tab as the field delimiter" \ "\n -s Output only the lines containing delimiter" \ "\n -f N Print only these fields" \ "\n -n Ignored" \ #define cut_example_usage \ "$ echo \"Hello world\" | cut -f 1 -d ' '\n" \ "Hello\n" \ "$ echo \"Hello world\" | cut -f 2 -d ' '\n" \ "world\n" \ #define date_trivial_usage \ "[OPTIONS] [+FMT] [TIME]" \ #define date_full_usage "\n\n" \ "Display time (using +FMT), or set time\n" \ IF_NOT_LONG_OPTS( \ "\n [-s] TIME Set time to TIME" \ "\n -u Work in UTC (don't convert to local time)" \ "\n -R Output RFC-2822 compliant date string" \ ) IF_LONG_OPTS( \ "\n [-s,--set] TIME Set time to TIME" \ "\n -u,--utc Work in UTC (don't convert to local time)" \ "\n -R,--rfc-2822 Output RFC-2822 compliant date string" \ ) \ IF_FEATURE_DATE_ISOFMT( \ "\n -I[SPEC] Output ISO-8601 compliant date string" \ "\n SPEC='date' (default) for date only," \ "\n 'hours', 'minutes', or 'seconds' for date and" \ "\n time to the indicated precision" \ ) \ IF_NOT_LONG_OPTS( \ "\n -r FILE Display last modification time of FILE" \ "\n -d TIME Display TIME, not 'now'" \ ) IF_LONG_OPTS( \ "\n -r,--reference FILE Display last modification time of FILE" \ "\n -d,--date TIME Display TIME, not 'now'" \ ) \ IF_FEATURE_DATE_ISOFMT( \ "\n -D FMT Use FMT for -d TIME conversion" \ ) \ "\n" \ "\nRecognized TIME formats:" \ "\n hh:mm[:ss]" \ "\n [YYYY.]MM.DD-hh:mm[:ss]" \ "\n YYYY-MM-DD hh:mm[:ss]" \ "\n [[[[[YY]YY]MM]DD]hh]mm[.ss]" \ IF_FEATURE_DATE_COMPAT( \ "\n 'date TIME' form accepts MMDDhhmm[[YY]YY][.ss] instead" \ ) \ #define date_example_usage \ "$ date\n" \ "Wed Apr 12 18:52:41 MDT 2000\n" \ #define dd_trivial_usage \ "[if=FILE] [of=FILE] " IF_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \ " [seek=N]" IF_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync|fsync]") \ #define dd_full_usage "\n\n" \ "Copy a file with converting and formatting\n" \ "\n if=FILE Read from FILE instead of stdin" \ "\n of=FILE Write to FILE instead of stdout" \ "\n bs=N Read and write N bytes at a time" \ IF_FEATURE_DD_IBS_OBS( \ "\n ibs=N Read N bytes at a time" \ ) \ IF_FEATURE_DD_IBS_OBS( \ "\n obs=N Write N bytes at a time" \ ) \ "\n count=N Copy only N input blocks" \ "\n skip=N Skip N input blocks" \ "\n seek=N Skip N output blocks" \ IF_FEATURE_DD_IBS_OBS( \ "\n conv=notrunc Don't truncate output file" \ "\n conv=noerror Continue after read errors" \ "\n conv=sync Pad blocks with zeros" \ "\n conv=fsync Physically write data out before finishing" \ ) \ "\n" \ "\nNumbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024)," \ "\nMD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)" \ #define dd_example_usage \ "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \ "4+0 records in\n" \ "4+0 records out\n" \ #define df_trivial_usage \ "[-Pk" \ IF_FEATURE_HUMAN_READABLE("mh") \ IF_FEATURE_DF_FANCY("ai] [-B SIZE") \ "] [FILESYSTEM]..." \ #define df_full_usage "\n\n" \ "Print filesystem usage statistics\n" \ "\n -P POSIX output format" \ "\n -k 1024-byte blocks (default)" \ IF_FEATURE_HUMAN_READABLE( \ "\n -m 1M-byte blocks" \ "\n -h Human readable (e.g. 1K 243M 2G)" \ ) \ IF_FEATURE_DF_FANCY( \ "\n -a Show all filesystems" \ "\n -i Inodes" \ "\n -B SIZE Blocksize" \ ) \ #define df_example_usage \ "$ df\n" \ "Filesystem 1K-blocks Used Available Use% Mounted on\n" \ "/dev/sda3 8690864 8553540 137324 98% /\n" \ "/dev/sda1 64216 36364 27852 57% /boot\n" \ "$ df /dev/sda3\n" \ "Filesystem 1K-blocks Used Available Use% Mounted on\n" \ "/dev/sda3 8690864 8553540 137324 98% /\n" \ "$ POSIXLY_CORRECT=sure df /dev/sda3\n" \ "Filesystem 512B-blocks Used Available Use% Mounted on\n" \ "/dev/sda3 17381728 17107080 274648 98% /\n" \ "$ POSIXLY_CORRECT=yep df -P /dev/sda3\n" \ "Filesystem 512-blocks Used Available Capacity Mounted on\n" \ "/dev/sda3 17381728 17107080 274648 98% /\n" \ #define dirname_trivial_usage \ "FILENAME" \ #define dirname_full_usage "\n\n" \ "Strip non-directory suffix from FILENAME" \ #define dirname_example_usage \ "$ dirname /tmp/foo\n" \ "/tmp\n" \ "$ dirname /tmp/foo/\n" \ "/tmp\n" \ #define dos2unix_trivial_usage \ "[-ud] [FILE]" \ #define dos2unix_full_usage "\n\n" \ "Convert FILE in-place from DOS to Unix format.\n" \ "When no file is given, use stdin/stdout.\n" \ "\n -u dos2unix" \ "\n -d unix2dos" \ #define unix2dos_trivial_usage \ "[-ud] [FILE]" \ #define unix2dos_full_usage "\n\n" \ "Convert FILE in-place from Unix to DOS format.\n" \ "When no file is given, use stdin/stdout.\n" \ "\n -u dos2unix" \ "\n -d unix2dos" \ #define du_trivial_usage \ "[-aHLdclsx" IF_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..." \ #define du_full_usage "\n\n" \ "Summarize disk space used for each FILE and/or directory\n" \ "\n -a Show file sizes too" \ "\n -L Follow all symlinks" \ "\n -H Follow symlinks on command line" \ "\n -d N Limit output to directories (and files with -a) of depth < N" \ "\n -c Show grand total" \ "\n -l Count sizes many times if hard linked" \ "\n -s Display only a total for each argument" \ "\n -x Skip directories on different filesystems" \ IF_FEATURE_HUMAN_READABLE( \ "\n -h Sizes in human readable format (e.g., 1K 243M 2G)" \ "\n -m Sizes in megabytes" \ ) \ "\n -k Sizes in kilobytes" IF_FEATURE_DU_DEFAULT_BLOCKSIZE_1K(" (default)") \ IF_NOT_FEATURE_DU_DEFAULT_BLOCKSIZE_1K( \ "\n Default unit is 512 bytes" \ ) \ #define du_example_usage \ "$ du\n" \ "16 ./CVS\n" \ "12 ./kernel-patches/CVS\n" \ "80 ./kernel-patches\n" \ "12 ./tests/CVS\n" \ "36 ./tests\n" \ "12 ./scripts/CVS\n" \ "16 ./scripts\n" \ "12 ./docs/CVS\n" \ "104 ./docs\n" \ "2417 .\n" \ #define echo_trivial_usage \ IF_FEATURE_FANCY_ECHO("[-neE] ") "[ARG]..." \ #define echo_full_usage "\n\n" \ "Print the specified ARGs to stdout" \ IF_FEATURE_FANCY_ECHO( "\n" \ "\n -n Suppress trailing newline" \ "\n -e Interpret backslash escapes (i.e., \\t=tab)" \ "\n -E Don't interpret backslash escapes (default)" \ ) \ #define echo_example_usage \ "$ echo \"Erik is cool\"\n" \ "Erik is cool\n" \ IF_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \ "Erik\n" \ "is\n" \ "cool\n" \ "$ echo \"Erik\\nis\\ncool\"\n" \ "Erik\\nis\\ncool\n") \ #define env_trivial_usage \ "[-iu] [-] [name=value]... [PROG ARGS]" \ #define env_full_usage "\n\n" \ "Print the current environment or run PROG after setting up\n" \ "the specified environment\n" \ "\n -, -i Start with an empty environment" \ "\n -u Remove variable from the environment" \ #define expand_trivial_usage \ "[-i] [-t N] [FILE]..." \ #define expand_full_usage "\n\n" \ "Convert tabs to spaces, writing to stdout\n" \ IF_FEATURE_EXPAND_LONG_OPTIONS( \ "\n -i,--initial Don't convert tabs after non blanks" \ "\n -t,--tabs=N Tabstops every N chars" \ ) \ IF_NOT_FEATURE_EXPAND_LONG_OPTIONS( \ "\n -i Don't convert tabs after non blanks" \ "\n -t Tabstops every N chars" \ ) \ #define unexpand_trivial_usage \ "[-fa][-t N] [FILE]..." \ #define unexpand_full_usage "\n\n" \ "Convert spaces to tabs, writing to stdout\n" \ IF_FEATURE_UNEXPAND_LONG_OPTIONS( \ "\n -a,--all Convert all blanks" \ "\n -f,--first-only Convert only leading blanks" \ "\n -t,--tabs=N Tabstops every N chars" \ ) \ IF_NOT_FEATURE_UNEXPAND_LONG_OPTIONS( \ "\n -a Convert all blanks" \ "\n -f Convert only leading blanks" \ "\n -t N Tabstops every N chars" \ ) \ #define expr_trivial_usage \ "EXPRESSION" \ #define expr_full_usage "\n\n" \ "Print the value of EXPRESSION to stdout\n" \ "\n" \ "EXPRESSION may be:\n" \ " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \ " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \ " ARG1 < ARG2 1 if ARG1 is less than ARG2, else 0. Similarly:\n" \ " ARG1 <= ARG2\n" \ " ARG1 = ARG2\n" \ " ARG1 != ARG2\n" \ " ARG1 >= ARG2\n" \ " ARG1 > ARG2\n" \ " ARG1 + ARG2 Sum of ARG1 and ARG2. Similarly:\n" \ " ARG1 - ARG2\n" \ " ARG1 * ARG2\n" \ " ARG1 / ARG2\n" \ " ARG1 % ARG2\n" \ " STRING : REGEXP Anchored pattern match of REGEXP in STRING\n" \ " match STRING REGEXP Same as STRING : REGEXP\n" \ " substr STRING POS LENGTH Substring of STRING, POS counted from 1\n" \ " index STRING CHARS Index in STRING where any CHARS is found, or 0\n" \ " length STRING Length of STRING\n" \ " quote TOKEN Interpret TOKEN as a string, even if\n" \ " it is a keyword like 'match' or an\n" \ " operator like '/'\n" \ " (EXPRESSION) Value of EXPRESSION\n" \ "\n" \ "Beware that many operators need to be escaped or quoted for shells.\n" \ "Comparisons are arithmetic if both ARGs are numbers, else\n" \ "lexicographical. Pattern matches return the string matched between\n" \ "\\( and \\) or null; if \\( and \\) are not used, they return the number\n" \ "of characters matched or 0." \ #define false_trivial_usage \ "" \ #define false_full_usage "\n\n" \ "Return an exit code of FALSE (1)" \ #define false_example_usage \ "$ false\n" \ "$ echo $?\n" \ "1\n" \ #define fold_trivial_usage \ "[-bs] [-w WIDTH] [FILE]..." \ #define fold_full_usage "\n\n" \ "Wrap input lines in each FILE (or stdin), writing to stdout\n" \ "\n -b Count bytes rather than columns" \ "\n -s Break at spaces" \ "\n -w Use WIDTH columns instead of 80" \ #define fsync_trivial_usage \ "[-d] FILE..." \ #define fsync_full_usage "\n\n" \ "Write files' buffered blocks to disk\n" \ "\n -d Avoid syncing metadata" \ #define head_trivial_usage \ "[OPTIONS] [FILE]..." \ #define head_full_usage "\n\n" \ "Print first 10 lines of each FILE (or stdin) to stdout.\n" \ "With more than one FILE, precede each with a filename header.\n" \ "\n -n N[kbm] Print first N lines" \ IF_FEATURE_FANCY_HEAD( \ "\n -c N[kbm] Print first N bytes" \ "\n -q Never print headers" \ "\n -v Always print headers" \ ) \ "\n" \ "\nN may be suffixed by k (x1024), b (x512), or m (x1024^2)." \ #define head_example_usage \ "$ head -n 2 /etc/passwd\n" \ "root:x:0:0:root:/root:/bin/bash\n" \ "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n" \ #define hostid_trivial_usage \ "" \ #define hostid_full_usage "\n\n" \ "Print out a unique 32-bit identifier for the machine" \ #define id_trivial_usage \ "[OPTIONS] [USER]" \ #define id_full_usage "\n\n" \ "Print information about USER or the current user\n" \ IF_SELINUX( \ "\n -Z Security context" \ ) \ "\n -u User ID" \ "\n -g Group ID" \ "\n -G Supplementary group IDs" \ "\n -n Print names instead of numbers" \ "\n -r Print real ID instead of effective ID" \ #define id_example_usage \ "$ id\n" \ "uid=1000(andersen) gid=1000(andersen)\n" \ #define groups_trivial_usage \ "[USER]" \ #define groups_full_usage "\n\n" \ "Print the group memberships of USER or for the current process" \ #define groups_example_usage \ "$ groups\n" \ "andersen lp dialout cdrom floppy\n" \ #define install_trivial_usage \ "[-cdDsp] [-o USER] [-g GRP] [-m MODE] [SOURCE]... DEST" \ #define install_full_usage "\n\n" \ "Copy files and set attributes\n" \ "\n -c Just copy (default)" \ "\n -d Create directories" \ "\n -D Create leading target directories" \ "\n -s Strip symbol table" \ "\n -p Preserve date" \ "\n -o USER Set ownership" \ "\n -g GRP Set group ownership" \ "\n -m MODE Set permissions" \ IF_SELINUX( \ "\n -Z Set security context" \ ) \ #define ln_trivial_usage \ "[OPTIONS] TARGET... LINK|DIR" \ #define ln_full_usage "\n\n" \ "Create a link LINK or DIR/TARGET to the specified TARGET(s)\n" \ "\n -s Make symlinks instead of hardlinks" \ "\n -f Remove existing destinations" \ "\n -n Don't dereference symlinks - treat like normal file" \ "\n -b Make a backup of the target (if exists) before link operation" \ "\n -S suf Use suffix instead of ~ when making backup files" \ "\n -T 2nd arg must be a DIR" \ "\n -v Verbose" \ #define ln_example_usage \ "$ ln -s BusyBox /tmp/ls\n" \ "$ ls -l /tmp/ls\n" \ "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n" \ #define logname_trivial_usage \ "" \ #define logname_full_usage "\n\n" \ "Print the name of the current user" \ #define logname_example_usage \ "$ logname\n" \ "root\n" \ #define ls_trivial_usage \ "[-1AaCxd" \ IF_FEATURE_LS_FOLLOWLINKS("LH") \ IF_FEATURE_LS_RECURSIVE("R") \ IF_FEATURE_LS_FILETYPES("Fp") "lins" \ IF_FEATURE_LS_TIMESTAMPS("e") \ IF_FEATURE_HUMAN_READABLE("h") \ IF_FEATURE_LS_SORTFILES("rSXv") \ IF_FEATURE_LS_TIMESTAMPS("ctu") \ IF_SELINUX("kKZ") "]" \ IF_FEATURE_AUTOWIDTH(" [-w WIDTH]") " [FILE]..." \ #define ls_full_usage "\n\n" \ "List directory contents\n" \ "\n -1 One column output" \ "\n -a Include entries which start with ." \ "\n -A Like -a, but exclude . and .." \ "\n -C List by columns" \ "\n -x List by lines" \ "\n -d List directory entries instead of contents" \ IF_FEATURE_LS_FOLLOWLINKS( \ "\n -L Follow symlinks" \ "\n -H Follow symlinks on command line" \ ) \ IF_FEATURE_LS_RECURSIVE( \ "\n -R Recurse" \ ) \ IF_FEATURE_LS_FILETYPES( \ "\n -p Append / to dir entries" \ "\n -F Append indicator (one of */=@|) to entries" \ ) \ "\n -l Long listing format" \ "\n -i List inode numbers" \ "\n -n List numeric UIDs and GIDs instead of names" \ "\n -s List allocated blocks" \ IF_FEATURE_LS_TIMESTAMPS( \ "\n -e List full date and time" \ ) \ IF_FEATURE_HUMAN_READABLE( \ "\n -h List sizes in human readable format (1K 243M 2G)" \ ) \ IF_FEATURE_LS_SORTFILES( \ "\n -r Sort in reverse order" \ "\n -S Sort by size" \ "\n -X Sort by extension" \ "\n -v Sort by version" \ ) \ IF_FEATURE_LS_TIMESTAMPS( \ "\n -c With -l: sort by ctime" \ "\n -t With -l: sort by mtime" \ "\n -u With -l: sort by atime" \ ) \ IF_SELINUX( \ "\n -k List security context" \ "\n -K List security context in long format" \ "\n -Z List security context and permission" \ ) \ IF_FEATURE_AUTOWIDTH( \ "\n -w N Assume the terminal is N columns wide" \ ) \ IF_FEATURE_LS_COLOR( \ "\n --color[={always,never,auto}] Control coloring" \ ) \ #define md5sum_trivial_usage \ IF_FEATURE_MD5_SHA1_SUM_CHECK("[-c[sw]] ")"[FILE]..." \ #define md5sum_full_usage "\n\n" \ "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \ IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \ "\n -c Check sums against list in FILEs" \ "\n -s Don't output anything, status code shows success" \ "\n -w Warn about improperly formatted checksum lines" \ ) \ #define md5sum_example_usage \ "$ md5sum < busybox\n" \ "6fd11e98b98a58f64ff3398d7b324003\n" \ "$ md5sum busybox\n" \ "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \ "$ md5sum -c -\n" \ "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \ "busybox: OK\n" \ "^D\n" \ #define sha1sum_trivial_usage \ IF_FEATURE_MD5_SHA1_SUM_CHECK("[-c[sw]] ")"[FILE]..." \ #define sha1sum_full_usage "\n\n" \ "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums" \ IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \ "\n -c Check sums against list in FILEs" \ "\n -s Don't output anything, status code shows success" \ "\n -w Warn about improperly formatted checksum lines" \ ) \ #define sha256sum_trivial_usage \ IF_FEATURE_MD5_SHA1_SUM_CHECK("[-c[sw]] ")"[FILE]..." \ #define sha256sum_full_usage "\n\n" \ "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA256 checksums" \ IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \ "\n -c Check sums against list in FILEs" \ "\n -s Don't output anything, status code shows success" \ "\n -w Warn about improperly formatted checksum lines" \ ) \ #define sha512sum_trivial_usage \ IF_FEATURE_MD5_SHA1_SUM_CHECK("[-c[sw]] ")"[FILE]..." \ #define sha512sum_full_usage "\n\n" \ "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA512 checksums" \ IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \ "\n -c Check sums against list in FILEs" \ "\n -s Don't output anything, status code shows success" \ "\n -w Warn about improperly formatted checksum lines" \ ) \ #define sha3sum_trivial_usage \ IF_FEATURE_MD5_SHA1_SUM_CHECK("[-c[sw]] ")"[FILE]..." \ #define sha3sum_full_usage "\n\n" \ "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA3-512 checksums" \ IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \ "\n -c Check sums against list in FILEs" \ "\n -s Don't output anything, status code shows success" \ "\n -w Warn about improperly formatted checksum lines" \ ) \ #define mkdir_trivial_usage \ "[OPTIONS] DIRECTORY..." \ #define mkdir_full_usage "\n\n" \ "Create DIRECTORY\n" \ "\n -m MODE Mode" \ "\n -p No error if exists; make parent directories as needed" \ IF_SELINUX( \ "\n -Z Set security context" \ ) \ #define mkdir_example_usage \ "$ mkdir /tmp/foo\n" \ "$ mkdir /tmp/foo\n" \ "/tmp/foo: File exists\n" \ "$ mkdir /tmp/foo/bar/baz\n" \ "/tmp/foo/bar/baz: No such file or directory\n" \ "$ mkdir -p /tmp/foo/bar/baz\n" \ #define mkfifo_trivial_usage \ "[-m MODE] " IF_SELINUX("[-Z] ") "NAME" \ #define mkfifo_full_usage "\n\n" \ "Create named pipe\n" \ "\n -m MODE Mode (default a=rw)" \ IF_SELINUX( \ "\n -Z Set security context" \ ) \ #define mknod_trivial_usage \ "[-m MODE] " IF_SELINUX("[-Z] ") "NAME TYPE MAJOR MINOR" \ #define mknod_full_usage "\n\n" \ "Create a special file (block, character, or pipe)\n" \ "\n -m MODE Creation mode (default a=rw)" \ IF_SELINUX( \ "\n -Z Set security context" \ ) \ "\nTYPE:" \ "\n b Block device" \ "\n c or u Character device" \ "\n p Named pipe (MAJOR and MINOR are ignored)" \ #define mknod_example_usage \ "$ mknod /dev/fd0 b 2 0\n" \ "$ mknod -m 644 /tmp/pipe p\n" \ #define mv_trivial_usage \ "[-fin] SOURCE DEST\n" \ "or: mv [-fin] SOURCE... DIRECTORY" \ #define mv_full_usage "\n\n" \ "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY\n" \ "\n -f Don't prompt before overwriting" \ "\n -i Interactive, prompt before overwrite" \ "\n -n Don't overwrite an existing file" \ #define mv_example_usage \ "$ mv /tmp/foo /bin/bar\n" \ #define nice_trivial_usage \ "[-n ADJUST] [PROG ARGS]" \ #define nice_full_usage "\n\n" \ "Change scheduling priority, run PROG\n" \ "\n -n ADJUST Adjust priority by ADJUST" \ #define nohup_trivial_usage \ "PROG ARGS" \ #define nohup_full_usage "\n\n" \ "Run PROG immune to hangups, with output to a non-tty" \ #define nohup_example_usage \ "$ nohup make &" \ #if ENABLE_DESKTOP \ #define od_trivial_usage \ "[-abcdfhilovxs] [-t TYPE] [-A RADIX] [-N SIZE] [-j SKIP] [-S MINSTR] [-w WIDTH] [FILE]..." \ #define od_full_usage "\n\n" \ "Print FILEs (or stdin) unambiguously, as octal bytes by default" \ #endif \ #if !ENABLE_DESKTOP \ #define od_trivial_usage \ "[-aBbcDdeFfHhIiLlOovXx] [FILE]" \ #define od_full_usage "\n\n" \ "Print FILE (or stdin) unambiguously, as octal bytes by default" \ #endif \ #define printenv_trivial_usage \ "[VARIABLE]..." \ #define printenv_full_usage "\n\n" \ "Print environment VARIABLEs.\n" \ "If no VARIABLE specified, print all." \ #define printf_trivial_usage \ "FORMAT [ARG]..." \ #define printf_full_usage "\n\n" \ "Format and print ARG(s) according to FORMAT (a-la C printf)" \ #define printf_example_usage \ "$ printf \"Val=%d\\n\" 5\n" \ "Val=5\n" \ #define pwd_trivial_usage \ "" \ #define pwd_full_usage "\n\n" \ "Print the full filename of the current working directory" \ #define pwd_example_usage \ "$ pwd\n" \ "/root\n" \ #define readlink_trivial_usage \ IF_FEATURE_READLINK_FOLLOW("[-fnv] ") "FILE" \ #define readlink_full_usage "\n\n" \ "Display the value of a symlink" \ IF_FEATURE_READLINK_FOLLOW( "\n" \ "\n -f Canonicalize by following all symlinks" \ "\n -n Don't add newline" \ "\n -v Verbose" \ ) \ #define realpath_trivial_usage \ "FILE..." \ #define realpath_full_usage "\n\n" \ "Return the absolute pathnames of given FILE" \ #define rm_trivial_usage \ "[-irf] FILE..." \ #define rm_full_usage "\n\n" \ "Remove (unlink) FILEs\n" \ "\n -i Always prompt before removing" \ "\n -f Never prompt" \ "\n -R,-r Recurse" \ #define rm_example_usage \ "$ rm -rf /tmp/foo\n" \ #define rmdir_trivial_usage \ "[OPTIONS] DIRECTORY..." \ #define rmdir_full_usage "\n\n" \ "Remove DIRECTORY if it is empty\n" \ IF_FEATURE_RMDIR_LONG_OPTIONS( \ "\n -p|--parents Include parents" \ "\n --ignore-fail-on-non-empty" \ ) \ IF_NOT_FEATURE_RMDIR_LONG_OPTIONS( \ "\n -p Include parents" \ ) \ #define rmdir_example_usage \ "# rmdir /tmp/foo\n" \ #define seq_trivial_usage \ "[-w] [-s SEP] [FIRST [INC]] LAST" \ #define seq_full_usage "\n\n" \ "Print numbers from FIRST to LAST, in steps of INC.\n" \ "FIRST, INC default to 1.\n" \ "\n -w Pad to last with leading zeros" \ "\n -s SEP String separator" \ #define sleep_trivial_usage \ IF_FEATURE_FANCY_SLEEP("[") "N" IF_FEATURE_FANCY_SLEEP("]...") \ #define sleep_full_usage "\n\n" \ IF_NOT_FEATURE_FANCY_SLEEP("Pause for N seconds") \ IF_FEATURE_FANCY_SLEEP( \ "Pause for a time equal to the total of the args given, where each arg can\n" \ "have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays") \ #define sleep_example_usage \ "$ sleep 2\n" \ "[2 second delay results]\n" \ IF_FEATURE_FANCY_SLEEP( \ "$ sleep 1d 3h 22m 8s\n" \ "[98528 second delay results]\n") \ #define sort_trivial_usage \ "[-nru" \ IF_FEATURE_SORT_BIG("gMcszbdfimSTokt] [-o FILE] [-k start[.offset][opts][,end[.offset][opts]] [-t CHAR") \ "] [FILE]..." \ #define sort_full_usage "\n\n" \ "Sort lines of text\n" \ IF_FEATURE_SORT_BIG( \ "\n -b Ignore leading blanks" \ "\n -c Check whether input is sorted" \ "\n -d Dictionary order (blank or alphanumeric only)" \ "\n -f Ignore case" \ "\n -g General numerical sort" \ "\n -i Ignore unprintable characters" \ "\n -k Sort key" \ "\n -M Sort month" \ ) \ "\n -n Sort numbers" \ IF_FEATURE_SORT_BIG( \ "\n -o Output to file" \ "\n -k Sort by key" \ "\n -t CHAR Key separator" \ ) \ "\n -r Reverse sort order" \ IF_FEATURE_SORT_BIG( \ "\n -s Stable (don't sort ties alphabetically)" \ ) \ "\n -u Suppress duplicate lines" \ IF_FEATURE_SORT_BIG( \ "\n -z Lines are terminated by NUL, not newline" \ "\n -mST Ignored for GNU compatibility") \ #define sort_example_usage \ "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \ "a\n" \ "b\n" \ "c\n" \ "d\n" \ "e\n" \ "f\n" \ IF_FEATURE_SORT_BIG( \ "$ echo -e \"c 3\\nb 2\\nd 2\" | $SORT -k 2,2n -k 1,1r\n" \ "d 2\n" \ "b 2\n" \ "c 3\n" \ ) \ "" \ #define split_trivial_usage \ "[OPTIONS] [INPUT [PREFIX]]" \ #define split_full_usage "\n\n" \ " -b N[k|m] Split by N (kilo|mega)bytes" \ "\n -l N Split by N lines" \ "\n -a N Use N letters as suffix" \ #define split_example_usage \ "$ split TODO foo\n" \ "$ cat TODO | split -a 2 -l 2 TODO_\n" \ #define stat_trivial_usage \ "[OPTIONS] FILE..." \ #define stat_full_usage "\n\n" \ "Display file (default) or filesystem status\n" \ IF_FEATURE_STAT_FORMAT( \ "\n -c fmt Use the specified format" \ ) \ "\n -f Display filesystem status" \ "\n -L Follow links" \ "\n -t Display info in terse form" \ IF_SELINUX( \ "\n -Z Print security context" \ ) \ IF_FEATURE_STAT_FORMAT( \ "\n\nValid format sequences for files:\n" \ " %a Access rights in octal\n" \ " %A Access rights in human readable form\n" \ " %b Number of blocks allocated (see %B)\n" \ " %B The size in bytes of each block reported by %b\n" \ " %d Device number in decimal\n" \ " %D Device number in hex\n" \ " %f Raw mode in hex\n" \ " %F File type\n" \ " %g Group ID of owner\n" \ " %G Group name of owner\n" \ " %h Number of hard links\n" \ " %i Inode number\n" \ " %n File name\n" \ " %N File name, with -> TARGET if symlink\n" \ " %o I/O block size\n" \ " %s Total size, in bytes\n" \ " %t Major device type in hex\n" \ " %T Minor device type in hex\n" \ " %u User ID of owner\n" \ " %U User name of owner\n" \ " %x Time of last access\n" \ " %X Time of last access as seconds since Epoch\n" \ " %y Time of last modification\n" \ " %Y Time of last modification as seconds since Epoch\n" \ " %z Time of last change\n" \ " %Z Time of last change as seconds since Epoch\n" \ "\nValid format sequences for file systems:\n" \ " %a Free blocks available to non-superuser\n" \ " %b Total data blocks in file system\n" \ " %c Total file nodes in file system\n" \ " %d Free file nodes in file system\n" \ " %f Free blocks in file system\n" \ IF_SELINUX( \ " %C Security context in selinux\n" \ ) \ " %i File System ID in hex\n" \ " %l Maximum length of filenames\n" \ " %n File name\n" \ " %s Block size (for faster transfer)\n" \ " %S Fundamental block size (for block counts)\n" \ " %t Type in hex\n" \ " %T Type in human readable form" \ ) \ #define stty_trivial_usage \ "[-a|g] [-F DEVICE] [SETTING]..." \ #define stty_full_usage "\n\n" \ "Without arguments, prints baud rate, line discipline,\n" \ "and deviations from stty sane\n" \ "\n -F DEVICE Open device instead of stdin" \ "\n -a Print all current settings in human-readable form" \ "\n -g Print in stty-readable form" \ "\n [SETTING] See manpage" \ #define sum_trivial_usage \ "[-rs] [FILE]..." \ #define sum_full_usage "\n\n" \ "Checksum and count the blocks in a file\n" \ "\n -r Use BSD sum algorithm (1K blocks)" \ "\n -s Use System V sum algorithm (512byte blocks)" \ #define sync_trivial_usage \ "" \ #define sync_full_usage "\n\n" \ "Write all buffered blocks to disk" \ #define tac_trivial_usage \ "[FILE]..." \ #define tac_full_usage "\n\n" \ "Concatenate FILEs and print them in reverse" \ #define tail_trivial_usage \ "[OPTIONS] [FILE]..." \ #define tail_full_usage "\n\n" \ "Print last 10 lines of each FILE (or stdin) to stdout.\n" \ "With more than one FILE, precede each with a filename header.\n" \ "\n -f Print data as file grows" \ IF_FEATURE_FANCY_TAIL( \ "\n -s SECONDS Wait SECONDS between reads with -f" \ ) \ "\n -n N[kbm] Print last N lines" \ IF_FEATURE_FANCY_TAIL( \ "\n -c N[kbm] Print last N bytes" \ "\n -q Never print headers" \ "\n -v Always print headers" \ "\n" \ "\nN may be suffixed by k (x1024), b (x512), or m (x1024^2)." \ "\nIf N starts with a '+', output begins with the Nth item from the start" \ "\nof each file, not from the end." \ ) \ #define tail_example_usage \ "$ tail -n 1 /etc/resolv.conf\n" \ "nameserver 10.0.0.1\n" \ #define tee_trivial_usage \ "[-ai] [FILE]..." \ #define tee_full_usage "\n\n" \ "Copy stdin to each FILE, and also to stdout\n" \ "\n -a Append to the given FILEs, don't overwrite" \ "\n -i Ignore interrupt signals (SIGINT)" \ #define tee_example_usage \ "$ echo \"Hello\" | tee /tmp/foo\n" \ "$ cat /tmp/foo\n" \ "Hello\n" \ #define test_trivial_usage \ "EXPRESSION ]" \ #define test_full_usage "\n\n" \ "Check file types, compare values etc. Return a 0/1 exit code\n" \ "depending on logical value of EXPRESSION" \ #define test_example_usage \ "$ test 1 -eq 2\n" \ "$ echo $?\n" \ "1\n" \ "$ test 1 -eq 1\n" \ "$ echo $?\n" \ "0\n" \ "$ [ -d /etc ]\n" \ "$ echo $?\n" \ "0\n" \ "$ [ -d /junk ]\n" \ "$ echo $?\n" \ "1\n" \ #define touch_trivial_usage \ "[-c]" IF_FEATURE_TOUCH_SUSV3(" [-d DATE] [-t DATE] [-r FILE]") " FILE..." \ #define touch_full_usage "\n\n" \ "Update the last-modified date on the given FILE[s]\n" \ "\n -c Don't create files" \ IF_FEATURE_TOUCH_SUSV3( \ "\n -d DT Date/time to use" \ "\n -t DT Date/time to use" \ "\n -r FILE Use FILE's date/time" \ ) \ #define touch_example_usage \ "$ ls -l /tmp/foo\n" \ "/bin/ls: /tmp/foo: No such file or directory\n" \ "$ touch /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n" \ #define tr_trivial_usage \ "[-cds] STRING1 [STRING2]" \ #define tr_full_usage "\n\n" \ "Translate, squeeze, or delete characters from stdin, writing to stdout\n" \ "\n -c Take complement of STRING1" \ "\n -d Delete input characters coded STRING1" \ "\n -s Squeeze multiple output characters of STRING2 into one character" \ #define tr_example_usage \ "$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \ "hello world\n" \ #define true_trivial_usage \ "" \ #define true_full_usage "\n\n" \ "Return an exit code of TRUE (0)" \ #define true_example_usage \ "$ true\n" \ "$ echo $?\n" \ "0\n" \ #define tty_trivial_usage \ "" \ #define tty_full_usage "\n\n" \ "Print file name of stdin's terminal" \ IF_INCLUDE_SUSv2( "\n" \ "\n -s Print nothing, only return exit status" \ ) \ #define tty_example_usage \ "$ tty\n" \ "/dev/tty2\n" \ #define uname_trivial_usage \ "[-amnrspv]" \ #define uname_full_usage "\n\n" \ "Print system information\n" \ "\n -a Print all" \ "\n -m The machine (hardware) type" \ "\n -n Hostname" \ "\n -r OS release" \ "\n -s OS name (default)" \ "\n -p Processor type" \ "\n -v OS version" \ #define uname_example_usage \ "$ uname -a\n" \ "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n" \ #define uniq_trivial_usage \ "[-cdu][-f,s,w N] [INPUT [OUTPUT]]" \ #define uniq_full_usage "\n\n" \ "Discard duplicate lines\n" \ "\n -c Prefix lines by the number of occurrences" \ "\n -d Only print duplicate lines" \ "\n -u Only print unique lines" \ "\n -f N Skip first N fields" \ "\n -s N Skip first N chars (after any skipped fields)" \ "\n -w N Compare N characters in line" \ #define uniq_example_usage \ "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \ "a\n" \ "b\n" \ "c\n" \ #define usleep_trivial_usage \ "N" \ #define usleep_full_usage "\n\n" \ "Pause for N microseconds" \ #define usleep_example_usage \ "$ usleep 1000000\n" \ "[pauses for 1 second]\n" \ #define uudecode_trivial_usage \ "[-o OUTFILE] [INFILE]" \ #define uudecode_full_usage "\n\n" \ "Uudecode a file\n" \ "Finds OUTFILE in uuencoded source unless -o is given" \ #define uudecode_example_usage \ "$ uudecode -o busybox busybox.uu\n" \ "$ ls -l busybox\n" \ "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n" \ #define base64_trivial_usage \ "[-d] [FILE]" \ #define base64_full_usage "\n\n" \ "Base64 encode or decode FILE to standard output" \ "\n -d Decode data" \ #define uuencode_trivial_usage \ "[-m] [FILE] STORED_FILENAME" \ #define uuencode_full_usage "\n\n" \ "Uuencode FILE (or stdin) to stdout\n" \ "\n -m Use base64 encoding per RFC1521" \ #define uuencode_example_usage \ "$ uuencode busybox busybox\n" \ "begin 755 busybox\n" \ "\n" \ "$ uudecode busybox busybox > busybox.uu\n" \ "$\n" \ #define wc_trivial_usage \ "[-c"IF_UNICODE_SUPPORT("m")"lwL] [FILE]..." \ #define wc_full_usage "\n\n" \ "Count lines, words, and bytes for each FILE (or stdin)\n" \ "\n -c Count bytes" \ IF_UNICODE_SUPPORT( \ "\n -m Count characters" \ ) \ "\n -l Count newlines" \ "\n -w Count words" \ "\n -L Print longest line length" \ #define wc_example_usage \ "$ wc /etc/passwd\n" \ " 31 46 1365 /etc/passwd\n" \ #define whoami_trivial_usage \ "" \ #define whoami_full_usage "\n\n" \ "Print the user name associated with the current effective user id" \ #define users_trivial_usage \ "" \ #define users_full_usage "\n\n" \ "Print the users currently logged on" \ #define who_trivial_usage \ "[-a]" \ #define who_full_usage "\n\n" \ "Show who is logged on\n" \ "\n -a Show all" \ "\n -H Print column headers" \ #define yes_trivial_usage \ "[STRING]" \ #define yes_full_usage "\n\n" \ "Repeatedly output a line with STRING, or 'y'" \ #define mktemp_trivial_usage \ "[-dt] [-p DIR] [TEMPLATE]" \ #define mktemp_full_usage "\n\n" \ "Create a temporary file with name based on TEMPLATE and print its name.\n" \ "TEMPLATE must end with XXXXXX (e.g. [/dir/]nameXXXXXX).\n" \ "Without TEMPLATE, -t tmp.XXXXXX is assumed.\n" \ "\n -d Make directory, not file" \ "\n -q Fail silently on errors" \ "\n -t Prepend base directory name to TEMPLATE" \ "\n -p DIR Use DIR as a base directory (implies -t)" \ "\n -u Do not create anything; print a name" \ "\n" \ "\nBase directory is: -p DIR, else $TMPDIR, else /tmp" \ #define mktemp_example_usage \ "$ mktemp /tmp/temp.XXXXXX\n" \ "/tmp/temp.mWiLjM\n" \ "$ ls -la /tmp/temp.mWiLjM\n" \ "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n" \ #define pipe_progress_trivial_usage NOUSAGE_STR \ #define pipe_progress_full_usage "" \ #define run_parts_trivial_usage \ "[-t"IF_FEATURE_RUN_PARTS_FANCY("l")"] [-a ARG]... [-u MASK] DIRECTORY" \ #define run_parts_full_usage "\n\n" \ "Run a bunch of scripts in DIRECTORY\n" \ "\n -t Dry run" \ IF_FEATURE_RUN_PARTS_FANCY( \ "\n -l Print names of matching files even if they are not executable" \ ) \ "\n -a ARG Pass ARG as argument to programs" \ "\n -u MASK Set umask to MASK before running programs" \ #define run_parts_example_usage \ "$ run-parts -a start /etc/init.d\n" \ "$ run-parts -a stop=now /etc/init.d\n\n" \ "Let's assume you have a script foo/dosomething:\n" \ "#!/bin/sh\n" \ "for i in $*; do eval $i; done; unset i\n" \ "case \"$1\" in\n" \ "start*) echo starting something;;\n" \ "stop*) set -x; shutdown -h $stop;;\n" \ "esac\n\n" \ "Running this yields:\n" \ "$run-parts -a stop=+4m foo/\n" \ "+ shutdown -h +4m" \ #define start_stop_daemon_trivial_usage \ "[OPTIONS] [-S|-K] ... [-- ARGS...]" \ #define start_stop_daemon_full_usage "\n\n" \ "Search for matching processes, and then\n" \ "-K: stop all matching processes.\n" \ "-S: start a process unless a matching process is found.\n" \ IF_FEATURE_START_STOP_DAEMON_LONG_OPTIONS( \ "\nProcess matching:" \ "\n -u,--user USERNAME|UID Match only this user's processes" \ "\n -n,--name NAME Match processes with NAME" \ "\n in comm field in /proc/PID/stat" \ "\n -x,--exec EXECUTABLE Match processes with this command" \ "\n in /proc/PID/{exe,cmdline}" \ "\n -p,--pidfile FILE Match a process with PID from the file" \ "\n All specified conditions must match" \ "\n-S only:" \ "\n -x,--exec EXECUTABLE Program to run" \ "\n -a,--startas NAME Zeroth argument" \ "\n -b,--background Background" \ IF_FEATURE_START_STOP_DAEMON_FANCY( \ "\n -N,--nicelevel N Change nice level" \ ) \ "\n -c,--chuid USER[:[GRP]] Change to user/group" \ "\n -m,--make-pidfile Write PID to the pidfile specified by -p" \ "\n-K only:" \ "\n -s,--signal SIG Signal to send" \ "\n -t,--test Match only, exit with 0 if a process is found" \ "\nOther:" \ IF_FEATURE_START_STOP_DAEMON_FANCY( \ "\n -o,--oknodo Exit with status 0 if nothing is done" \ "\n -v,--verbose Verbose" \ ) \ "\n -q,--quiet Quiet" \ ) \ IF_NOT_FEATURE_START_STOP_DAEMON_LONG_OPTIONS( \ "\nProcess matching:" \ "\n -u USERNAME|UID Match only this user's processes" \ "\n -n NAME Match processes with NAME" \ "\n in comm field in /proc/PID/stat" \ "\n -x EXECUTABLE Match processes with this command" \ "\n command in /proc/PID/cmdline" \ "\n -p FILE Match a process with PID from the file" \ "\n All specified conditions must match" \ "\n-S only:" \ "\n -x EXECUTABLE Program to run" \ "\n -a NAME Zeroth argument" \ "\n -b Background" \ IF_FEATURE_START_STOP_DAEMON_FANCY( \ "\n -N N Change nice level" \ ) \ "\n -c USER[:[GRP]] Change to user/group" \ "\n -m Write PID to the pidfile specified by -p" \ "\n-K only:" \ "\n -s SIG Signal to send" \ "\n -t Match only, exit with 0 if a process is found" \ "\nOther:" \ IF_FEATURE_START_STOP_DAEMON_FANCY( \ "\n -o Exit with status 0 if nothing is done" \ "\n -v Verbose" \ ) \ "\n -q Quiet" \ ) \ #define which_trivial_usage \ "[COMMAND]..." \ #define which_full_usage "\n\n" \ "Locate a COMMAND" \ #define which_example_usage \ "$ which login\n" \ "/bin/login\n" \ #define chattr_trivial_usage \ "[-R] [-+=AacDdijsStTu] [-v VERSION] [FILE]..." \ #define chattr_full_usage "\n\n" \ "Change file attributes on an ext2 fs\n" \ "\nModifiers:" \ "\n - Remove attributes" \ "\n + Add attributes" \ "\n = Set attributes" \ "\nAttributes:" \ "\n A Don't track atime" \ "\n a Append mode only" \ "\n c Enable compress" \ "\n D Write dir contents synchronously" \ "\n d Don't backup with dump" \ "\n i Cannot be modified (immutable)" \ "\n j Write all data to journal first" \ "\n s Zero disk storage when deleted" \ "\n S Write file contents synchronously" \ "\n t Disable tail-merging of partial blocks with other files" \ "\n u Allow file to be undeleted" \ "\n -R Recurse" \ "\n -v Set the file's version/generation number" \ #define fsck_trivial_usage \ "[-ANPRTV] [-C FD] [-t FSTYPE] [FS_OPTS] [BLOCKDEV]..." \ #define fsck_full_usage "\n\n" \ "Check and repair filesystems\n" \ "\n -A Walk /etc/fstab and check all filesystems" \ "\n -N Don't execute, just show what would be done" \ "\n -P With -A, check filesystems in parallel" \ "\n -R With -A, skip the root filesystem" \ "\n -T Don't show title on startup" \ "\n -V Verbose" \ "\n -C n Write status information to specified filedescriptor" \ "\n -t TYPE List of filesystem types to check" \ #define lsattr_trivial_usage \ "[-Radlv] [FILE]..." \ #define lsattr_full_usage "\n\n" \ "List file attributes on an ext2 fs\n" \ "\n -R Recurse" \ "\n -a Don't hide entries starting with ." \ "\n -d List directory entries instead of contents" \ "\n -l List long flag names" \ "\n -v List the file's version/generation number" \ #define tune2fs_trivial_usage \ "[-c MAX_MOUNT_COUNT] " \ "[-i DAYS] " \ "[-C MOUNT_COUNT] " \ "[-L LABEL] " \ "BLOCKDEV" \ #define tune2fs_full_usage "\n\n" \ "Adjust filesystem options on ext[23] filesystems" \ #define awk_trivial_usage \ "[OPTIONS] [AWK_PROGRAM] [FILE]..." \ #define awk_full_usage "\n\n" \ " -v VAR=VAL Set variable" \ "\n -F SEP Use SEP as field separator" \ "\n -f FILE Read program from FILE" \ #define cmp_trivial_usage \ "[-l] [-s] FILE1 [FILE2" IF_DESKTOP(" [SKIP1 [SKIP2]]") "]" \ #define cmp_full_usage "\n\n" \ "Compare FILE1 with FILE2 (or stdin)\n" \ "\n -l Write the byte numbers (decimal) and values (octal)" \ "\n for all differing bytes" \ "\n -s Quiet" \ #define diff_trivial_usage \ "[-abBdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2" \ #define diff_full_usage "\n\n" \ "Compare files line by line and output the differences between them.\n" \ "This implementation supports unified diffs only.\n" \ "\n -a Treat all files as text" \ "\n -b Ignore changes in the amount of whitespace" \ "\n -B Ignore changes whose lines are all blank" \ "\n -d Try hard to find a smaller set of changes" \ "\n -i Ignore case differences" \ "\n -L Use LABEL instead of the filename in the unified header" \ "\n -N Treat absent files as empty" \ "\n -q Output only whether files differ" \ "\n -r Recurse" \ "\n -S Start with FILE when comparing directories" \ "\n -T Make tabs line up by prefixing a tab when necessary" \ "\n -s Report when two files are the same" \ "\n -t Expand tabs to spaces in output" \ "\n -U Output LINES lines of context" \ "\n -w Ignore all whitespace" \ #define ed_trivial_usage "" \ #define ed_full_usage "" \ #define patch_trivial_usage \ "[OPTIONS] [ORIGFILE [PATCHFILE]]" \ #define patch_full_usage "\n\n" \ IF_LONG_OPTS( \ " -p,--strip N Strip N leading components from file names" \ "\n -i,--input DIFF Read DIFF instead of stdin" \ "\n -R,--reverse Reverse patch" \ "\n -N,--forward Ignore already applied patches" \ "\n -E,--remove-empty-files Remove output files if they become empty" \ ) \ IF_NOT_LONG_OPTS( \ " -p N Strip N leading components from file names" \ "\n -i DIFF Read DIFF instead of stdin" \ "\n -R Reverse patch" \ "\n -N Ignore already applied patches" \ "\n -E Remove output files if they become empty" \ ) \ #define patch_example_usage \ "$ patch -p1 < example.diff\n" \ "$ patch -p0 -i example.diff" \ #define sed_trivial_usage \ "[-inr] [-f FILE]... [-e CMD]... [FILE]...\n" \ "or: sed [-inr] CMD [FILE]..." \ #define sed_full_usage "\n\n" \ " -e CMD Add CMD to sed commands to be executed" \ "\n -f FILE Add FILE contents to sed commands to be executed" \ "\n -i[SFX] Edit files in-place (otherwise sends to stdout)" \ "\n Optionally back files up, appending SFX" \ "\n -n Suppress automatic printing of pattern space" \ "\n -r Use extended regex syntax" \ "\n" \ "\nIf no -e or -f, the first non-option argument is the sed command string." \ "\nRemaining arguments are input files (stdin if none)." \ #define sed_example_usage \ "$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \ "bar\n" \ #define vi_trivial_usage \ "[OPTIONS] [FILE]..." \ #define vi_full_usage "\n\n" \ "Edit FILE\n" \ IF_FEATURE_VI_COLON( \ "\n -c CMD Initial command to run ($EXINIT also available)" \ ) \ IF_FEATURE_VI_READONLY( \ "\n -R Read-only" \ ) \ "\n -H List available features" \ #define find_trivial_usage \ "[PATH]... [OPTIONS] [ACTIONS]" \ #define find_full_usage "\n\n" \ "Search for files and perform actions on them.\n" \ "First failed action stops processing of current file.\n" \ "Defaults: PATH is current directory, action is '-print'\n" \ "\n -follow Follow symlinks" \ IF_FEATURE_FIND_XDEV( \ "\n -xdev Don't descend directories on other filesystems" \ ) \ IF_FEATURE_FIND_MAXDEPTH( \ "\n -maxdepth N Descend at most N levels. -maxdepth 0 applies" \ "\n actions to command line arguments only" \ "\n -mindepth N Don't act on first N levels" \ ) \ IF_FEATURE_FIND_DEPTH( \ "\n -depth Act on directory *after* traversing it" \ ) \ "\n" \ "\nActions:" \ IF_FEATURE_FIND_PAREN( \ "\n ( ACTIONS ) Group actions for -o / -a" \ ) \ IF_FEATURE_FIND_NOT( \ "\n ! ACT Invert ACT's success/failure" \ ) \ "\n ACT1 [-a] ACT2 If ACT1 fails, stop, else do ACT2" \ "\n ACT1 -o ACT2 If ACT1 succeeds, stop, else do ACT2" \ "\n Note: -a has higher priority than -o" \ "\n -name PATTERN Match file name (w/o directory name) to PATTERN" \ "\n -iname PATTERN Case insensitive -name" \ IF_FEATURE_FIND_PATH( \ "\n -path PATTERN Match path to PATTERN" \ "\n -ipath PATTERN Case insensitive -path" \ ) \ IF_FEATURE_FIND_REGEX( \ "\n -regex PATTERN Match path to regex PATTERN" \ ) \ IF_FEATURE_FIND_TYPE( \ "\n -type X File type is X (one of: f,d,l,b,c,...)" \ ) \ IF_FEATURE_FIND_PERM( \ "\n -perm MASK At least one mask bit (+MASK), all bits (-MASK)," \ "\n or exactly MASK bits are set in file's mode" \ ) \ IF_FEATURE_FIND_MTIME( \ "\n -mtime DAYS mtime is greater than (+N), less than (-N)," \ "\n or exactly N days in the past" \ ) \ IF_FEATURE_FIND_MMIN( \ "\n -mmin MINS mtime is greater than (+N), less than (-N)," \ "\n or exactly N minutes in the past" \ ) \ IF_FEATURE_FIND_NEWER( \ "\n -newer FILE mtime is more recent than FILE's" \ ) \ IF_FEATURE_FIND_INUM( \ "\n -inum N File has inode number N" \ ) \ IF_FEATURE_FIND_USER( \ "\n -user NAME/ID File is owned by given user" \ ) \ IF_FEATURE_FIND_GROUP( \ "\n -group NAME/ID File is owned by given group" \ ) \ IF_FEATURE_FIND_SIZE( \ "\n -size N[bck] File size is N (c:bytes,k:kbytes,b:512 bytes(def.))" \ "\n +/-N: file size is bigger/smaller than N" \ ) \ IF_FEATURE_FIND_LINKS( \ "\n -links N Number of links is greater than (+N), less than (-N)," \ "\n or exactly N" \ ) \ IF_FEATURE_FIND_CONTEXT( \ "\n -context CTX File has specified security context" \ ) \ IF_FEATURE_FIND_PRUNE( \ "\n -prune If current file is directory, don't descend into it" \ ) \ "\nIf none of the following actions is specified, -print is assumed" \ "\n -print Print file name" \ IF_FEATURE_FIND_PRINT0( \ "\n -print0 Print file name, NUL terminated" \ ) \ IF_FEATURE_FIND_EXEC( \ "\n -exec CMD ARG ; Run CMD with all instances of {} replaced by" \ "\n file name. Fails if CMD exits with nonzero" \ ) \ IF_FEATURE_FIND_DELETE( \ "\n -delete Delete current file/directory. Turns on -depth option" \ ) \ #define find_example_usage \ "$ find / -name passwd\n" \ "/etc/passwd\n" \ #define grep_trivial_usage \ "[-HhnlLoqvsriw" \ "F" \ IF_FEATURE_GREP_EGREP_ALIAS("E") \ IF_EXTRA_COMPAT("z") \ "] [-m N] " \ IF_FEATURE_GREP_CONTEXT("[-A/B/C N] ") \ "PATTERN/-e PATTERN.../-f FILE [FILE]..." \ #define grep_full_usage "\n\n" \ "Search for PATTERN in FILEs (or stdin)\n" \ "\n -H Add 'filename:' prefix" \ "\n -h Do not add 'filename:' prefix" \ "\n -n Add 'line_no:' prefix" \ "\n -l Show only names of files that match" \ "\n -L Show only names of files that don't match" \ "\n -c Show only count of matching lines" \ "\n -o Show only the matching part of line" \ "\n -q Quiet. Return 0 if PATTERN is found, 1 otherwise" \ "\n -v Select non-matching lines" \ "\n -s Suppress open and read errors" \ "\n -r Recurse" \ "\n -i Ignore case" \ "\n -w Match whole words only" \ "\n -x Match whole lines only" \ "\n -F PATTERN is a literal (not regexp)" \ IF_FEATURE_GREP_EGREP_ALIAS( \ "\n -E PATTERN is an extended regexp" \ ) \ IF_EXTRA_COMPAT( \ "\n -z Input is NUL terminated" \ ) \ "\n -m N Match up to N times per file" \ IF_FEATURE_GREP_CONTEXT( \ "\n -A N Print N lines of trailing context" \ "\n -B N Print N lines of leading context" \ "\n -C N Same as '-A N -B N'" \ ) \ "\n -e PTRN Pattern to match" \ "\n -f FILE Read pattern from file" \ #define grep_example_usage \ "$ grep root /etc/passwd\n" \ "root:x:0:0:root:/root:/bin/bash\n" \ "$ grep ^[rR]oo. /etc/passwd\n" \ "root:x:0:0:root:/root:/bin/bash\n" \ #define egrep_trivial_usage NOUSAGE_STR \ #define egrep_full_usage "" \ #define fgrep_trivial_usage NOUSAGE_STR \ #define fgrep_full_usage "" \ #define xargs_trivial_usage \ "[OPTIONS] [PROG ARGS]" \ #define xargs_full_usage "\n\n" \ "Run PROG on every item given by stdin\n" \ IF_FEATURE_XARGS_SUPPORT_CONFIRMATION( \ "\n -p Ask user whether to run each command" \ ) \ "\n -r Don't run command if input is empty" \ IF_FEATURE_XARGS_SUPPORT_ZERO_TERM( \ "\n -0 Input is separated by NUL characters" \ ) \ "\n -t Print the command on stderr before execution" \ "\n -e[STR] STR stops input processing" \ "\n -n N Pass no more than N args to PROG" \ "\n -s N Pass command line of no more than N bytes" \ IF_FEATURE_XARGS_SUPPORT_TERMOPT( \ "\n -x Exit if size is exceeded" \ ) \ #define xargs_example_usage \ "$ ls | xargs gzip\n" \ "$ find . -name '*.c' -print | xargs rm\n" \ #define bootchartd_trivial_usage \ "start [PROG ARGS]|stop|init" \ #define bootchartd_full_usage "\n\n" \ "Create /var/log/bootchart.tgz with boot chart data\n" \ "\nstart: start background logging; with PROG, run PROG, then kill logging with USR1" \ "\nstop: send USR1 to all bootchartd processes" \ "\ninit: start background logging; stop when getty/xdm is seen (for init scripts)" \ "\nUnder PID 1: as init, then exec $bootchart_init, /init, /sbin/init" \ #define halt_trivial_usage \ "[-d DELAY] [-n] [-f]" IF_FEATURE_WTMP(" [-w]") \ #define halt_full_usage "\n\n" \ "Halt the system\n" \ "\n -d SEC Delay interval" \ "\n -n Do not sync" \ "\n -f Force (don't go through init)" \ IF_FEATURE_WTMP( \ "\n -w Only write a wtmp record" \ ) \ #define poweroff_trivial_usage \ "[-d DELAY] [-n] [-f]" \ #define poweroff_full_usage "\n\n" \ "Halt and shut off power\n" \ "\n -d SEC Delay interval" \ "\n -n Do not sync" \ "\n -f Force (don't go through init)" \ #define reboot_trivial_usage \ "[-d DELAY] [-n] [-f]" \ #define reboot_full_usage "\n\n" \ "Reboot the system\n" \ "\n -d SEC Delay interval" \ "\n -n Do not sync" \ "\n -f Force (don't go through init)" \ #define linuxrc_trivial_usage NOUSAGE_STR \ #define linuxrc_full_usage "" \ #define init_trivial_usage \ "" \ #define init_full_usage "\n\n" \ "Init is the parent of all processes" \ #define init_notes_usage \ "This version of init is designed to be run only by the kernel.\n" \ "\n" \ "BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \ "the /etc/inittab file is completely ignored by BusyBox init. If you want\n" \ "runlevels, use sysvinit.\n" \ "\n" \ "BusyBox init works just fine without an inittab. If no inittab is found,\n" \ "it has the following default behavior:\n" \ "\n" \ " ::sysinit:/etc/init.d/rcS\n" \ " ::askfirst:/bin/sh\n" \ " ::ctrlaltdel:/sbin/reboot\n" \ " ::shutdown:/sbin/swapoff -a\n" \ " ::shutdown:/bin/umount -a -r\n" \ " ::restart:/sbin/init\n" \ "\n" \ "if it detects that /dev/console is _not_ a serial console, it will also run:\n" \ "\n" \ " tty2::askfirst:/bin/sh\n" \ " tty3::askfirst:/bin/sh\n" \ " tty4::askfirst:/bin/sh\n" \ "\n" \ "If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \ "\n" \ " :::\n" \ "\n" \ " :\n" \ "\n" \ " WARNING: This field has a non-traditional meaning for BusyBox init!\n" \ " The id field is used by BusyBox init to specify the controlling tty for\n" \ " the specified process to run on. The contents of this field are\n" \ " appended to \"/dev/\" and used as-is. There is no need for this field to\n" \ " be unique, although if it isn't you may have strange results. If this\n" \ " field is left blank, the controlling tty is set to the console. Also\n" \ " note that if BusyBox detects that a serial console is in use, then only\n" \ " entries whose controlling tty is either the serial console or /dev/null\n" \ " will be run. BusyBox init does nothing with utmp. We don't need no\n" \ " stinkin' utmp.\n" \ "\n" \ " :\n" \ "\n" \ " The runlevels field is completely ignored.\n" \ "\n" \ " :\n" \ "\n" \ " Valid actions include: sysinit, respawn, askfirst, wait,\n" \ " once, restart, ctrlaltdel, and shutdown.\n" \ "\n" \ " The available actions can be classified into two groups: actions\n" \ " that are run only once, and actions that are re-run when the specified\n" \ " process exits.\n" \ "\n" \ " Run only-once actions:\n" \ "\n" \ " 'sysinit' is the first item run on boot. init waits until all\n" \ " sysinit actions are completed before continuing. Following the\n" \ " completion of all sysinit actions, all 'wait' actions are run.\n" \ " 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \ " the specified task completes. 'once' actions are asynchronous,\n" \ " therefore, init does not wait for them to complete. 'restart' is\n" \ " the action taken to restart the init process. By default this should\n" \ " simply run /sbin/init, but can be a script which runs pivot_root or it\n" \ " can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \ " actions are run when the system detects that someone on the system\n" \ " console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \ " wants to run 'reboot' at this point to cause the system to reboot.\n" \ " Finally the 'shutdown' action specifies the actions to taken when\n" \ " init is told to reboot. Unmounting filesystems and disabling swap\n" \ " is a very good here.\n" \ "\n" \ " Run repeatedly actions:\n" \ "\n" \ " 'respawn' actions are run after the 'once' actions. When a process\n" \ " started with a 'respawn' action exits, init automatically restarts\n" \ " it. Unlike sysvinit, BusyBox init does not stop processes from\n" \ " respawning out of control. The 'askfirst' actions acts just like\n" \ " respawn, except that before running the specified process it\n" \ " displays the line \"Please press Enter to activate this console.\"\n" \ " and then waits for the user to press enter before starting the\n" \ " specified process.\n" \ "\n" \ " Unrecognized actions (like initdefault) will cause init to emit an\n" \ " error message, and then go along with its business. All actions are\n" \ " run in the order they appear in /etc/inittab.\n" \ "\n" \ " :\n" \ "\n" \ " Specifies the process to be executed and its command line.\n" \ "\n" \ "Example /etc/inittab file:\n" \ "\n" \ " # This is run first except when booting in single-user mode\n" \ " #\n" \ " ::sysinit:/etc/init.d/rcS\n" \ " \n" \ " # /bin/sh invocations on selected ttys\n" \ " #\n" \ " # Start an \"askfirst\" shell on the console (whatever that may be)\n" \ " ::askfirst:-/bin/sh\n" \ " # Start an \"askfirst\" shell on /dev/tty2-4\n" \ " tty2::askfirst:-/bin/sh\n" \ " tty3::askfirst:-/bin/sh\n" \ " tty4::askfirst:-/bin/sh\n" \ " \n" \ " # /sbin/getty invocations for selected ttys\n" \ " #\n" \ " tty4::respawn:/sbin/getty 38400 tty4\n" \ " tty5::respawn:/sbin/getty 38400 tty5\n" \ " \n" \ " \n" \ " # Example of how to put a getty on a serial line (for a terminal)\n" \ " #\n" \ " #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \ " #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \ " #\n" \ " # Example how to put a getty on a modem line\n" \ " #::respawn:/sbin/getty 57600 ttyS2\n" \ " \n" \ " # Stuff to do when restarting the init process\n" \ " ::restart:/sbin/init\n" \ " \n" \ " # Stuff to do before rebooting\n" \ " ::ctrlaltdel:/sbin/reboot\n" \ " ::shutdown:/bin/umount -a -r\n" \ " ::shutdown:/sbin/swapoff -a\n" \ #define mesg_trivial_usage \ "[y|n]" \ #define mesg_full_usage "\n\n" \ "Control write access to your terminal\n" \ " y Allow write access to your terminal\n" \ " n Disallow write access to your terminal" \ #define parse_trivial_usage \ "[-x] [-n MAXTOKENS] [-m MINTOKENS] [-d DELIMS] [-f FLAGS] FILE..." \ #define parse_full_usage "\n\n" \ " -x Suppress output (for benchmarking)" \ #define addgroup_trivial_usage \ "[-g GID] " IF_FEATURE_ADDUSER_TO_GROUP("[USER] ") "GROUP" \ #define addgroup_full_usage "\n\n" \ "Add a group " IF_FEATURE_ADDUSER_TO_GROUP("or add a user to a group") "\n" \ "\n -g GID Group id" \ "\n -S Create a system group" \ #define add_shell_trivial_usage \ "SHELL..." \ #define add_shell_full_usage "\n\n" \ "Add SHELLs to /etc/shells" \ #define remove_shell_trivial_usage \ "SHELL..." \ #define remove_shell_full_usage "\n\n" \ "Remove SHELLs from /etc/shells" \ #define adduser_trivial_usage \ "[OPTIONS] USER [GROUP]" \ #define adduser_full_usage "\n\n" \ "Create new user, or add USER to GROUP\n" \ "\n -h DIR Home directory" \ "\n -g GECOS GECOS field" \ "\n -s SHELL Login shell" \ "\n -G GRP Add user to existing group" \ "\n -S Create a system user" \ "\n -D Don't assign a password" \ "\n -H Don't create home directory" \ "\n -u UID User id" \ #define chpasswd_trivial_usage \ IF_LONG_OPTS("[--md5|--encrypted]") IF_NOT_LONG_OPTS("[-m|-e]") \ #define chpasswd_full_usage "\n\n" \ "Read user:password from stdin and update /etc/passwd\n" \ IF_LONG_OPTS( \ "\n -e,--encrypted Supplied passwords are in encrypted form" \ "\n -m,--md5 Use MD5 encryption instead of DES" \ ) \ IF_NOT_LONG_OPTS( \ "\n -e Supplied passwords are in encrypted form" \ "\n -m Use MD5 encryption instead of DES" \ ) \ #define cryptpw_trivial_usage \ "[OPTIONS] [PASSWORD] [SALT]" \ #define cryptpw_full_usage "\n\n" \ "Crypt PASSWORD using crypt(3)\n" \ IF_LONG_OPTS( \ "\n -P,--password-fd=N Read password from fd N" \ "\n -m,--method=TYPE Encryption method" \ "\n -S,--salt=SALT" \ ) \ IF_NOT_LONG_OPTS( \ "\n -P N Read password from fd N" \ "\n -m TYPE Encryption method TYPE" \ "\n -S SALT" \ ) \ #define mkpasswd_trivial_usage \ "[OPTIONS] [PASSWORD] [SALT]" \ #define mkpasswd_full_usage "\n\n" \ "Crypt PASSWORD using crypt(3)\n" \ IF_LONG_OPTS( \ "\n -P,--password-fd=N Read password from fd N" \ "\n -m,--method=TYPE Encryption method" \ "\n -S,--salt=SALT" \ ) \ IF_NOT_LONG_OPTS( \ "\n -P N Read password from fd N" \ "\n -m TYPE Encryption method TYPE" \ "\n -S SALT" \ ) \ #define deluser_trivial_usage \ "USER" \ #define deluser_full_usage "\n\n" \ "Delete USER from the system" \ #define delgroup_trivial_usage \ IF_FEATURE_DEL_USER_FROM_GROUP("[USER] ")"GROUP" \ #define delgroup_full_usage "\n\n" \ "Delete group GROUP from the system" \ IF_FEATURE_DEL_USER_FROM_GROUP(" or user USER from group GROUP") \ #define getty_trivial_usage \ "[OPTIONS] BAUD_RATE[,BAUD_RATE]... TTY [TERMTYPE]" \ #define getty_full_usage "\n\n" \ "Open TTY, prompt for login name, then invoke /bin/login\n" \ "\n -h Enable hardware RTS/CTS flow control" \ "\n -L Set CLOCAL (ignore Carrier Detect state)" \ "\n -m Get baud rate from modem's CONNECT status message" \ "\n -n Don't prompt for login name" \ "\n -w Wait for CR or LF before sending /etc/issue" \ "\n -i Don't display /etc/issue" \ "\n -f ISSUE_FILE Display ISSUE_FILE instead of /etc/issue" \ "\n -l LOGIN Invoke LOGIN instead of /bin/login" \ "\n -t SEC Terminate after SEC if no login name is read" \ "\n -I INITSTR Send INITSTR before anything else" \ "\n -H HOST Log HOST into the utmp file as the hostname" \ "\n" \ "\nBAUD_RATE of 0 leaves it unchanged" \ #define login_trivial_usage \ "[-p] [-h HOST] [[-f] USER]" \ #define login_full_usage "\n\n" \ "Begin a new session on the system\n" \ "\n -f Don't authenticate (user already authenticated)" \ "\n -h Name of the remote host" \ "\n -p Preserve environment" \ #define passwd_trivial_usage \ "[OPTIONS] [USER]" \ #define passwd_full_usage "\n\n" \ "Change USER's password (default: current user)" \ "\n" \ "\n -a ALG Encryption method" \ "\n -d Set password to ''" \ "\n -l Lock (disable) account" \ "\n -u Unlock (enable) account" \ #define su_trivial_usage \ "[OPTIONS] [-] [USER]" \ #define su_full_usage "\n\n" \ "Run shell under USER (by default, root)\n" \ "\n -,-l Clear environment, run shell as login shell" \ "\n -p,-m Do not set new $HOME, $SHELL, $USER, $LOGNAME" \ "\n -c CMD Command to pass to 'sh -c'" \ "\n -s SH Shell to use instead of user's default" \ #define sulogin_trivial_usage \ "[-t N] [TTY]" \ #define sulogin_full_usage "\n\n" \ "Single user login\n" \ "\n -t N Timeout" \ #define vlock_trivial_usage \ "[-a]" \ #define vlock_full_usage "\n\n" \ "Lock a virtual terminal. A password is required to unlock.\n" \ "\n -a Lock all VTs" \ #define popmaildir_trivial_usage \ "[OPTIONS] MAILDIR [CONN_HELPER ARGS]" \ #define popmaildir_full_usage "\n\n" \ "Fetch content of remote mailbox to local maildir\n" \ "\n -s Skip authorization" \ "\n -T Get messages with TOP instead of RETR" \ "\n -k Keep retrieved messages on the server" \ "\n -t SEC Network timeout" \ IF_FEATURE_POPMAILDIR_DELIVERY( \ "\n -F \"PROG ARGS\" Filter program (may be repeated)" \ "\n -M \"PROG ARGS\" Delivery program" \ ) \ "\n" \ "\nFetch from plain POP3 server:" \ "\npopmaildir -k DIR nc pop3.server.com 110 4, 'dc 8 8 mul 2 2 + / p' -> 16" \ #define dc_example_usage \ "$ dc 2 2 + p\n" \ "4\n" \ "$ dc 8 8 \\* 2 2 + / p\n" \ "16\n" \ "$ dc 0 1 and p\n" \ "0\n" \ "$ dc 0 1 or p\n" \ "1\n" \ "$ echo 72 9 div 8 mul p | dc\n" \ "64\n" \ #define devfsd_trivial_usage \ "mntpnt [-v]" IF_DEVFSD_FG_NP("[-fg][-np]") \ #define devfsd_full_usage "\n\n" \ "Manage devfs permissions and old device name symlinks\n" \ "\n mntpnt The mount point where devfs is mounted" \ "\n -v Print the protocol version numbers for devfsd" \ "\n and the kernel-side protocol version and exit" \ IF_DEVFSD_FG_NP( \ "\n -fg Run in foreground" \ "\n -np Exit after parsing the configuration file" \ "\n and processing synthetic REGISTER events," \ "\n don't poll for events" \ ) \ #define devmem_trivial_usage \ "ADDRESS [WIDTH [VALUE]]" \ #define devmem_full_usage "\n\n" \ "Read/write from physical address\n" \ "\n ADDRESS Address to act upon" \ "\n WIDTH Width (8/16/...)" \ "\n VALUE Data to be written" \ #define eject_trivial_usage \ "[-t] [-T] [DEVICE]" \ #define eject_full_usage "\n\n" \ "Eject DEVICE or default /dev/cdrom\n" \ IF_FEATURE_EJECT_SCSI( \ "\n -s SCSI device" \ ) \ "\n -t Close tray" \ "\n -T Open/close tray (toggle)" \ #define fbsplash_trivial_usage \ "-s IMGFILE [-c] [-d DEV] [-i INIFILE] [-f CMD]" \ #define fbsplash_full_usage "\n\n" \ " -s Image" \ "\n -c Hide cursor" \ "\n -d Framebuffer device (default /dev/fb0)" \ "\n -i Config file (var=value):" \ "\n BAR_LEFT,BAR_TOP,BAR_WIDTH,BAR_HEIGHT" \ "\n BAR_R,BAR_G,BAR_B" \ "\n -f Control pipe (else exit after drawing image)" \ "\n commands: 'NN' (% for progress bar) or 'exit'" \ #define flashcp_trivial_usage \ "-v FILE MTD_DEVICE" \ #define flashcp_full_usage "\n\n" \ "Copy an image to MTD device\n" \ "\n -v Verbose" \ #define flash_eraseall_trivial_usage \ "[-jq] MTD_DEVICE" \ #define flash_eraseall_full_usage "\n\n" \ "Erase an MTD device\n" \ "\n -j Format the device for jffs2" \ "\n -q Don't display progress messages" \ #define flash_lock_trivial_usage \ "MTD_DEVICE OFFSET SECTORS" \ #define flash_lock_full_usage "\n\n" \ "Lock part or all of an MTD device. If SECTORS is -1, then all sectors\n" \ "will be locked, regardless of the value of OFFSET" \ #define flash_unlock_trivial_usage \ "MTD_DEVICE" \ #define flash_unlock_full_usage "\n\n" \ "Unlock an MTD device" \ #define hdparm_trivial_usage \ "[OPTIONS] [DEVICE]" \ #define hdparm_full_usage "\n\n" \ " -a Get/set fs readahead" \ "\n -A Set drive read-lookahead flag (0/1)" \ "\n -b Get/set bus state (0 == off, 1 == on, 2 == tristate)" \ "\n -B Set Advanced Power Management setting (1-255)" \ "\n -c Get/set IDE 32-bit IO setting" \ "\n -C Check IDE power mode status" \ IF_FEATURE_HDPARM_HDIO_GETSET_DMA( \ "\n -d Get/set using_dma flag") \ "\n -D Enable/disable drive defect-mgmt" \ "\n -f Flush buffer cache for device on exit" \ "\n -g Display drive geometry" \ "\n -h Display terse usage information" \ IF_FEATURE_HDPARM_GET_IDENTITY( \ "\n -i Display drive identification") \ IF_FEATURE_HDPARM_GET_IDENTITY( \ "\n -I Detailed/current information directly from drive") \ "\n -k Get/set keep_settings_over_reset flag (0/1)" \ "\n -K Set drive keep_features_over_reset flag (0/1)" \ "\n -L Set drive doorlock (0/1) (removable harddisks only)" \ "\n -m Get/set multiple sector count" \ "\n -n Get/set ignore-write-errors flag (0/1)" \ "\n -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)" \ "\n -P Set drive prefetch count" \ "\n -Q Get/set DMA tagged-queuing depth (if supported)" \ "\n -r Get/set readonly flag (DANGEROUS to set)" \ IF_FEATURE_HDPARM_HDIO_SCAN_HWIF( \ "\n -R Register an IDE interface (DANGEROUS)") \ "\n -S Set standby (spindown) timeout" \ "\n -t Perform device read timings" \ "\n -T Perform cache read timings" \ "\n -u Get/set unmaskirq flag (0/1)" \ IF_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \ "\n -U Unregister an IDE interface (DANGEROUS)") \ "\n -v Defaults; same as -mcudkrag for IDE drives" \ "\n -V Display program version and exit immediately" \ IF_FEATURE_HDPARM_HDIO_DRIVE_RESET( \ "\n -w Perform device reset (DANGEROUS)") \ "\n -W Set drive write-caching flag (0/1) (DANGEROUS)" \ IF_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \ "\n -x Tristate device for hotswap (0/1) (DANGEROUS)") \ "\n -X Set IDE xfer mode (DANGEROUS)" \ "\n -y Put IDE drive in standby mode" \ "\n -Y Put IDE drive to sleep" \ "\n -Z Disable Seagate auto-powersaving mode" \ "\n -z Reread partition table" \ #define inotifyd_trivial_usage \ "PROG FILE1[:MASK]..." \ #define inotifyd_full_usage "\n\n" \ "Run PROG on filesystem changes." \ "\nWhen a filesystem event matching MASK occurs on FILEn," \ "\nPROG ACTUAL_EVENTS FILEn [SUBFILE] is run." \ "\nIf PROG is -, events are sent to stdout." \ "\nEvents:" \ "\n a File is accessed" \ "\n c File is modified" \ "\n e Metadata changed" \ "\n w Writable file is closed" \ "\n 0 Unwritable file is closed" \ "\n r File is opened" \ "\n D File is deleted" \ "\n M File is moved" \ "\n u Backing fs is unmounted" \ "\n o Event queue overflowed" \ "\n x File can't be watched anymore" \ "\nIf watching a directory:" \ "\n m Subfile is moved into dir" \ "\n y Subfile is moved out of dir" \ "\n n Subfile is created" \ "\n d Subfile is deleted" \ "\n" \ "\ninotifyd waits for PROG to exit." \ "\nWhen x event happens for all FILEs, inotifyd exits." \ #define ionice_trivial_usage \ "[-c 1-3] [-n 0-7] [-p PID] [PROG]" \ #define ionice_full_usage "\n\n" \ "Change I/O priority and class\n" \ "\n -c Class. 1:realtime 2:best-effort 3:idle" \ "\n -n Priority" \ #define last_trivial_usage \ ""IF_FEATURE_LAST_FANCY("[-HW] [-f FILE]") \ #define last_full_usage "\n\n" \ "Show listing of the last users that logged into the system" \ IF_FEATURE_LAST_FANCY( "\n" \ "\n -W Display with no host column truncation" \ "\n -f FILE Read from FILE instead of /var/log/wtmp" \ ) \ #define less_trivial_usage \ "[-E" IF_FEATURE_LESS_FLAGS("Mm") "Nh~I?] [FILE]..." \ #define less_full_usage "\n\n" \ "View FILE (or stdin) one screenful at a time\n" \ "\n -E Quit once the end of a file is reached" \ IF_FEATURE_LESS_FLAGS( \ "\n -M,-m Display status line with line numbers" \ "\n and percentage through the file" \ ) \ "\n -N Prefix line number to each line" \ "\n -I Ignore case in all searches" \ "\n -~ Suppress ~s displayed past EOF" \ #if ENABLE_FEATURE_MAKEDEVS_LEAF \ #define makedevs_trivial_usage \ "NAME TYPE MAJOR MINOR FIRST LAST [s]" \ #define makedevs_full_usage "\n\n" \ "Create a range of block or character special files" \ "\n" \ "\nTYPE is:" \ "\n b Block device" \ "\n c Character device" \ "\n f FIFO, MAJOR and MINOR are ignored" \ "\n" \ "\nFIRST..LAST specify numbers appended to NAME." \ "\nIf 's' is the last argument, the base device is created as well." \ "\n" \ "\nExamples:" \ "\n makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63" \ "\n makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8" \ #define makedevs_example_usage \ "# makedevs /dev/ttyS c 4 66 2 63\n" \ "[creates ttyS2-ttyS63]\n" \ "# makedevs /dev/hda b 3 0 0 8 s\n" \ "[creates hda,hda1-hda8]\n" \ #endif \ #if ENABLE_FEATURE_MAKEDEVS_TABLE \ #define makedevs_trivial_usage \ "[-d device_table] rootdir" \ #define makedevs_full_usage "\n\n" \ "Create a range of special files as specified in a device table.\n" \ "Device table entries take the form of:\n" \ " \n" \ "Where name is the file name, type can be one of:\n" \ " f Regular file\n" \ " d Directory\n" \ " c Character device\n" \ " b Block device\n" \ " p Fifo (named pipe)\n" \ "uid is the user id for the target file, gid is the group id for the\n" \ "target file. The rest of the entries (major, minor, etc) apply to\n" \ "to device special files. A '-' may be used for blank entries." \ #define makedevs_example_usage \ "For example:\n" \ " \n" \ "/dev d 755 0 0 - - - - -\n" \ "/dev/console c 666 0 0 5 1 - - -\n" \ "/dev/null c 666 0 0 1 3 0 0 -\n" \ "/dev/zero c 666 0 0 1 5 0 0 -\n" \ "/dev/hda b 640 0 0 3 0 0 0 -\n" \ "/dev/hda b 640 0 0 3 1 1 1 15\n\n" \ "Will Produce:\n" \ "/dev\n" \ "/dev/console\n" \ "/dev/null\n" \ "/dev/zero\n" \ "/dev/hda\n" \ "/dev/hda[0-15]\n" \ #endif \ #define man_trivial_usage \ "[-aw] [MANPAGE]..." \ #define man_full_usage "\n\n" \ "Format and display manual page\n" \ "\n -a Display all pages" \ "\n -w Show page locations" \ #define microcom_trivial_usage \ "[-d DELAY] [-t TIMEOUT] [-s SPEED] [-X] TTY" \ #define microcom_full_usage "\n\n" \ "Copy bytes for stdin to TTY and from TTY to stdout\n" \ "\n -d Wait up to DELAY ms for TTY output before sending every" \ "\n next byte to it" \ "\n -t Exit if both stdin and TTY are silent for TIMEOUT ms" \ "\n -s Set serial line to SPEED" \ "\n -X Disable special meaning of NUL and Ctrl-X from stdin" \ #define mountpoint_trivial_usage \ "[-q] <[-dn] DIR | -x DEVICE>" \ #define mountpoint_full_usage "\n\n" \ "Check if the directory is a mountpoint\n" \ "\n -q Quiet" \ "\n -d Print major/minor device number of the filesystem" \ "\n -n Print device name of the filesystem" \ "\n -x Print major/minor device number of the blockdevice" \ #define mountpoint_example_usage \ "$ mountpoint /proc\n" \ "/proc is not a mountpoint\n" \ "$ mountpoint /sys\n" \ "/sys is a mountpoint\n" \ #define mt_trivial_usage \ "[-f device] opcode value" \ #define mt_full_usage "\n\n" \ "Control magnetic tape drive operation\n" \ "\n" \ "Available Opcodes:\n" \ "\n" \ "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \ "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \ "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \ "setpart tell unload unlock weof wset" \ #define nandwrite_trivial_usage \ "[-p] [-s ADDR] MTD_DEVICE [FILE]" \ #define nandwrite_full_usage "\n\n" \ "Write to the specified MTD device\n" \ "\n -p Pad to page size" \ "\n -s ADDR Start address" \ #define nanddump_trivial_usage \ "[-o] [-b] [-s ADDR] [-f FILE] MTD_DEVICE" \ #define nanddump_full_usage "\n\n" \ "Dump the specified MTD device\n" \ "\n -o Dump oob data" \ "\n -b Omit bad block from the dump" \ "\n -s ADDR Start address" \ "\n -l LEN Length" \ "\n -f FILE Dump to file ('-' for stdout)" \ #define raidautorun_trivial_usage \ "DEVICE" \ #define raidautorun_full_usage "\n\n" \ "Tell the kernel to automatically search and start RAID arrays" \ #define raidautorun_example_usage \ "$ raidautorun /dev/md0" \ #define readahead_trivial_usage \ "[FILE]..." \ #define readahead_full_usage "\n\n" \ "Preload FILEs to RAM" \ #define rfkill_trivial_usage \ "COMMAND [INDEX|TYPE]" \ #define rfkill_full_usage "\n\n" \ "Enable/disable wireless devices\n" \ "\nCommands:" \ "\n list [INDEX|TYPE] List current state" \ "\n block INDEX|TYPE Disable device" \ "\n unblock INDEX|TYPE Enable device" \ "\n" \ "\n TYPE: all, wlan(wifi), bluetooth, uwb(ultrawideband)," \ "\n wimax, wwan, gps, fm" \ #define runlevel_trivial_usage \ "[FILE]" \ #define runlevel_full_usage "\n\n" \ "Find the current and previous system runlevel\n" \ "\n" \ "If no utmp FILE exists or if no runlevel record can be found,\n" \ "print \"unknown\"" \ #define runlevel_example_usage \ "$ runlevel /var/run/utmp\n" \ "N 2" \ #define rx_trivial_usage \ "FILE" \ #define rx_full_usage "\n\n" \ "Receive a file using the xmodem protocol" \ #define rx_example_usage \ "$ rx /tmp/foo\n" \ #define setsid_trivial_usage \ "PROG ARGS" \ #define setsid_full_usage "\n\n" \ "Run PROG in a new session. PROG will have no controlling terminal\n" \ "and will not be affected by keyboard signals (Ctrl-C etc).\n" \ "See setsid(2) for details." \ #define strings_trivial_usage \ "[-afo] [-n LEN] [FILE]..." \ #define strings_full_usage "\n\n" \ "Display printable strings in a binary file\n" \ "\n -a Scan whole file (default)" \ "\n -f Precede strings with filenames" \ "\n -n LEN At least LEN characters form a string (default 4)" \ "\n -o Precede strings with decimal offsets" \ #define taskset_trivial_usage \ "[-p] [MASK] [PID | PROG ARGS]" \ #define taskset_full_usage "\n\n" \ "Set or get CPU affinity\n" \ "\n -p Operate on an existing PID" \ #define taskset_example_usage \ "$ taskset 0x7 ./dgemm_test&\n" \ "$ taskset -p 0x1 $!\n" \ "pid 4790's current affinity mask: 7\n" \ "pid 4790's new affinity mask: 1\n" \ "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \ "pid 6671's current affinity mask: 1\n" \ "pid 6671's new affinity mask: 1\n" \ "$ taskset -p 1\n" \ "pid 1's current affinity mask: 3\n" \ #define time_trivial_usage \ "[-v] PROG ARGS" \ #define time_full_usage "\n\n" \ "Run PROG, display resource usage when it exits\n" \ "\n -v Verbose" \ #define timeout_trivial_usage \ "[-t SECS] [-s SIG] PROG ARGS" \ #define timeout_full_usage "\n\n" \ "Runs PROG. Sends SIG to it if it is not gone in SECS seconds.\n" \ "Defaults: SECS: 10, SIG: TERM." \ #define ttysize_trivial_usage \ "[w] [h]" \ #define ttysize_full_usage "\n\n" \ "Print dimension(s) of stdin's terminal, on error return 80x25" \ #define ubiattach_trivial_usage \ "-m MTD_NUM [-d UBI_NUM] UBI_CTRL_DEV" \ #define ubiattach_full_usage "\n\n" \ "Attach MTD device to UBI\n" \ "\nOptions:" \ "\n -m MTD_NUM MTD device number to attach" \ "\n -d UBI_NUM UBI device number to assign" \ #define ubidetach_trivial_usage \ "-d UBI_NUM UBI_CTRL_DEV" \ #define ubidetach_full_usage "\n\n" \ "Detach MTD device from UBI\n" \ "\nOptions:" \ "\n -d UBI_NUM UBI device number" \ #define volname_trivial_usage \ "[DEVICE]" \ #define volname_full_usage "\n\n" \ "Show CD volume name of the DEVICE (default /dev/cdrom)" \ #define wall_trivial_usage \ "[FILE]" \ #define wall_full_usage "\n\n" \ "Write content of FILE or stdin to all logged-in users" \ #define wall_sample_usage \ "echo foo | wall\n" \ "wall ./mymessage" \ #define watchdog_trivial_usage \ "[-t N[ms]] [-T N[ms]] [-F] DEV" \ #define watchdog_full_usage "\n\n" \ "Periodically write to watchdog device DEV\n" \ "\n -T N Reboot after N seconds if not reset (default 60)" \ "\n -t N Reset every N seconds (default 30)" \ "\n -F Run in foreground" \ "\n" \ "\nUse 500ms to specify period in milliseconds" \ #if !ENABLE_MODPROBE_SMALL \ #define depmod_trivial_usage "[-n] [-b BASE] [VERSION] [MODFILES]..." \ #define depmod_full_usage "\n\n" \ "Generate modules.dep, alias, and symbols files" \ "\n" \ "\n -b BASE Use BASE/lib/modules/VERSION" \ "\n -n Dry run: print files to stdout" \ #endif \ #if !ENABLE_MODPROBE_SMALL \ #define insmod_trivial_usage \ IF_FEATURE_2_4_MODULES("[OPTIONS] MODULE ") \ IF_NOT_FEATURE_2_4_MODULES("FILE ") \ "[SYMBOL=VALUE]..." \ #define insmod_full_usage "\n\n" \ "Load the specified kernel modules into the kernel" \ IF_FEATURE_2_4_MODULES( "\n" \ "\n -f Force module to load into the wrong kernel version" \ "\n -k Make module autoclean-able" \ "\n -v Verbose" \ "\n -q Quiet" \ "\n -L Lock: prevent simultaneous loads" \ IF_FEATURE_INSMOD_LOAD_MAP( \ "\n -m Output load map to stdout" \ ) \ "\n -x Don't export externs" \ ) \ #endif \ #if !ENABLE_MODPROBE_SMALL \ #define lsmod_trivial_usage \ "" \ #define lsmod_full_usage "\n\n" \ "List the currently loaded kernel modules" \ #endif \ #define modinfo_trivial_usage \ "[-adlp0] [-F keyword] MODULE" \ #define modinfo_full_usage "\n\n" \ " -a Shortcut for '-F author'" \ "\n -d Shortcut for '-F description'" \ "\n -l Shortcut for '-F license'" \ "\n -p Shortcut for '-F parm'" \ "\n -F keyword Keyword to look for" \ "\n -0 Separate output with NULs" \ #define modinfo_example_usage \ "$ modinfo -F vermagic loop\n" \ #if !ENABLE_MODPROBE_SMALL \ #define modprobe_notes_usage \ "modprobe can (un)load a stack of modules, passing each module options (when\n" \ "loading). modprobe uses a configuration file to determine what option(s) to\n" \ "pass each module it loads.\n" \ "\n" \ "The configuration file is searched (in this order):\n" \ "\n" \ " /etc/modprobe.conf (2.6 only)\n" \ " /etc/modules.conf\n" \ " /etc/conf.modules (deprecated)\n" \ "\n" \ "They all have the same syntax (see below). If none is present, it is\n" \ "_not_ an error; each loaded module is then expected to load without\n" \ "options. Once a file is found, the others are tested for.\n" \ "\n" \ "/etc/modules.conf entry format:\n" \ "\n" \ " alias \n" \ " Makes it possible to modprobe alias_name, when there is no such module.\n" \ " It makes sense if your mod_name is long, or you want a more representative\n" \ " name for that module (eg. 'scsi' in place of 'aha7xxx').\n" \ " This makes it also possible to use a different set of options (below) for\n" \ " the module and the alias.\n" \ " A module can be aliased more than once.\n" \ "\n" \ " options \n" \ " When loading module mod_name (or the module aliased by alias_name), pass\n" \ " the \"symbol=value\" pairs as option to that module.\n" \ "\n" \ "Sample /etc/modules.conf file:\n" \ "\n" \ " options tulip irq=3\n" \ " alias tulip tulip2\n" \ " options tulip2 irq=4 io=0x308\n" \ "\n" \ "Other functionality offered by 'classic' modprobe is not available in\n" \ "this implementation.\n" \ "\n" \ "If module options are present both in the config file, and on the command line,\n" \ "then the options from the command line will be passed to the module _after_\n" \ "the options from the config file. That way, you can have defaults in the config\n" \ "file, and override them for a specific usage from the command line.\n" \ #define modprobe_example_usage \ "(with the above /etc/modules.conf):\n\n" \ "$ modprobe tulip\n" \ " will load the module 'tulip' with default option 'irq=3'\n\n" \ "$ modprobe tulip irq=5\n" \ " will load the module 'tulip' with option 'irq=5', thus overriding the default\n\n" \ "$ modprobe tulip2\n" \ " will load the module 'tulip' with default options 'irq=4 io=0x308',\n" \ " which are the default for alias 'tulip2'\n\n" \ "$ modprobe tulip2 irq=8\n" \ " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" \ " which are the default for alias 'tulip2' overridden by the option 'irq=8'\n\n" \ " from the command line\n\n" \ "$ modprobe tulip2 irq=2 io=0x210\n" \ " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" \ " which are the default for alias 'tulip2' overridden by the options 'irq=2 io=0x210'\n\n" \ " from the command line\n" \ #define modprobe_trivial_usage \ "[-alrqvsD" IF_FEATURE_MODPROBE_BLACKLIST("b") "]" \ " MODULE [symbol=value]..." \ #define modprobe_full_usage "\n\n" \ " -a Load multiple MODULEs" \ "\n -l List (MODULE is a pattern)" \ "\n -r Remove MODULE (stacks) or do autoclean" \ "\n -q Quiet" \ "\n -v Verbose" \ "\n -s Log to syslog" \ "\n -D Show dependencies" \ IF_FEATURE_MODPROBE_BLACKLIST( \ "\n -b Apply blacklist to module names too" \ ) \ #endif /* !ENABLE_MODPROBE_SMALL */ \ #if ENABLE_MODPROBE_SMALL \ #define depmod_trivial_usage NOUSAGE_STR \ #define depmod_full_usage "" \ #define lsmod_trivial_usage \ "" \ #define lsmod_full_usage "\n\n" \ "List the currently loaded kernel modules" \ #define insmod_trivial_usage \ IF_FEATURE_2_4_MODULES("[OPTIONS] MODULE ") \ IF_NOT_FEATURE_2_4_MODULES("FILE ") \ "[SYMBOL=VALUE]..." \ #define insmod_full_usage "\n\n" \ "Load the specified kernel modules into the kernel" \ IF_FEATURE_2_4_MODULES( "\n" \ "\n -f Force module to load into the wrong kernel version" \ "\n -k Make module autoclean-able" \ "\n -v Verbose" \ "\n -q Quiet" \ "\n -L Lock: prevent simultaneous loads" \ IF_FEATURE_INSMOD_LOAD_MAP( \ "\n -m Output load map to stdout" \ ) \ "\n -x Don't export externs" \ ) \ #define rmmod_trivial_usage \ "[-wfa] [MODULE]..." \ #define rmmod_full_usage "\n\n" \ "Unload kernel modules\n" \ "\n -w Wait until the module is no longer used" \ "\n -f Force unload" \ "\n -a Remove all unused modules (recursively)" \ #define rmmod_example_usage \ "$ rmmod tulip\n" \ #define modprobe_trivial_usage \ "[-qfwrsv] MODULE [symbol=value]..." \ #define modprobe_full_usage "\n\n" \ " -r Remove MODULE (stacks) or do autoclean" \ "\n -q Quiet" \ "\n -v Verbose" \ "\n -f Force" \ "\n -w Wait for unload" \ "\n -s Report via syslog instead of stderr" \ #endif \ #if !ENABLE_MODPROBE_SMALL \ #define rmmod_trivial_usage \ "[-wfa] [MODULE]..." \ #define rmmod_full_usage "\n\n" \ "Unload kernel modules\n" \ "\n -w Wait until the module is no longer used" \ "\n -f Force unload" \ "\n -a Remove all unused modules (recursively)" \ #define rmmod_example_usage \ "$ rmmod tulip\n" \ #endif \ #define arp_trivial_usage \ "\n[-vn] [-H HWTYPE] [-i IF] -a [HOSTNAME]" \ "\n[-v] [-i IF] -d HOSTNAME [pub]" \ "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [temp]" \ "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [netmask MASK] pub" \ "\n[-v] [-H HWTYPE] [-i IF] -Ds HOSTNAME IFACE [netmask MASK] pub" \ #define arp_full_usage "\n\n" \ "Manipulate ARP cache\n" \ "\n -a Display (all) hosts" \ "\n -s Set new ARP entry" \ "\n -d Delete a specified entry" \ "\n -v Verbose" \ "\n -n Don't resolve names" \ "\n -i IF Network interface" \ "\n -D Read from given device" \ "\n -A,-p AF Protocol family" \ "\n -H HWTYPE Hardware address type" \ #define arping_trivial_usage \ "[-fqbDUA] [-c CNT] [-w TIMEOUT] [-I IFACE] [-s SRC_IP] DST_IP" \ #define arping_full_usage "\n\n" \ "Send ARP requests/replies\n" \ "\n -f Quit on first ARP reply" \ "\n -q Quiet" \ "\n -b Keep broadcasting, don't go unicast" \ "\n -D Duplicated address detection mode" \ "\n -U Unsolicited ARP mode, update your neighbors" \ "\n -A ARP answer mode, update your neighbors" \ "\n -c N Stop after sending N ARP requests" \ "\n -w TIMEOUT Time to wait for ARP reply, seconds" \ "\n -I IFACE Interface to use (default eth0)" \ "\n -s SRC_IP Sender IP address" \ "\n DST_IP Target IP address" \ #define brctl_trivial_usage \ "COMMAND [BRIDGE [INTERFACE]]" \ #define brctl_full_usage "\n\n" \ "Manage ethernet bridges\n" \ "\nCommands:" \ IF_FEATURE_BRCTL_SHOW( \ "\n show Show a list of bridges" \ ) \ "\n addbr BRIDGE Create BRIDGE" \ "\n delbr BRIDGE Delete BRIDGE" \ "\n addif BRIDGE IFACE Add IFACE to BRIDGE" \ "\n delif BRIDGE IFACE Delete IFACE from BRIDGE" \ IF_FEATURE_BRCTL_FANCY( \ "\n setageing BRIDGE TIME Set ageing time" \ "\n setfd BRIDGE TIME Set bridge forward delay" \ "\n sethello BRIDGE TIME Set hello time" \ "\n setmaxage BRIDGE TIME Set max message age" \ "\n setpathcost BRIDGE COST Set path cost" \ "\n setportprio BRIDGE PRIO Set port priority" \ "\n setbridgeprio BRIDGE PRIO Set bridge priority" \ "\n stp BRIDGE [1/yes/on|0/no/off] STP on/off" \ ) \ #define dnsd_trivial_usage \ "[-dvs] [-c CONFFILE] [-t TTL_SEC] [-p PORT] [-i ADDR]" \ #define dnsd_full_usage "\n\n" \ "Small static DNS server daemon\n" \ "\n -c FILE Config file" \ "\n -t SEC TTL" \ "\n -p PORT Listen on PORT" \ "\n -i ADDR Listen on ADDR" \ "\n -d Daemonize" \ "\n -v Verbose" \ "\n -s Send successful replies only. Use this if you want" \ "\n to use /etc/resolv.conf with two nameserver lines:" \ "\n nameserver DNSD_SERVER" \ "\n nameserver NORMAL_DNS_SERVER" \ #define ether_wake_trivial_usage \ "[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC" \ #define ether_wake_full_usage "\n\n" \ "Send a magic packet to wake up sleeping machines.\n" \ "MAC must be a station address (00:11:22:33:44:55) or\n" \ "a hostname with a known 'ethers' entry.\n" \ "\n -b Send wake-up packet to the broadcast address" \ "\n -i iface Interface to use (default eth0)" \ "\n -p pass Append four or six byte password PW to the packet" \ #define ftpd_trivial_usage \ "[-wvS] [-t N] [-T N] [DIR]" \ #define ftpd_full_usage "\n\n" \ "Anonymous FTP server\n" \ "\n" \ "ftpd should be used as an inetd service.\n" \ "ftpd's line for inetd.conf:\n" \ " 21 stream tcp nowait root ftpd ftpd /files/to/serve\n" \ "It also can be ran from tcpsvd:\n" \ " tcpsvd -vE 0.0.0.0 21 ftpd /files/to/serve\n" \ "\n -w Allow upload" \ "\n -v Log errors to stderr. -vv: verbose log" \ "\n -S Log errors to syslog. -SS: verbose log" \ "\n -t,-T Idle and absolute timeouts" \ "\n DIR Change root to this directory" \ #define ftpget_trivial_usage \ "[OPTIONS] HOST [LOCAL_FILE] REMOTE_FILE" \ #define ftpget_full_usage "\n\n" \ "Download a file via FTP\n" \ IF_FEATURE_FTPGETPUT_LONG_OPTIONS( \ "\n -c,--continue Continue previous transfer" \ "\n -v,--verbose Verbose" \ "\n -u,--username USER Username" \ "\n -p,--password PASS Password" \ "\n -P,--port NUM Port" \ ) \ IF_NOT_FEATURE_FTPGETPUT_LONG_OPTIONS( \ "\n -c Continue previous transfer" \ "\n -v Verbose" \ "\n -u USER Username" \ "\n -p PASS Password" \ "\n -P NUM Port" \ ) \ #define ftpput_trivial_usage \ "[OPTIONS] HOST [REMOTE_FILE] LOCAL_FILE" \ #define ftpput_full_usage "\n\n" \ "Upload a file to a FTP server\n" \ IF_FEATURE_FTPGETPUT_LONG_OPTIONS( \ "\n -v,--verbose Verbose" \ "\n -u,--username USER Username" \ "\n -p,--password PASS Password" \ "\n -P,--port NUM Port" \ ) \ IF_NOT_FEATURE_FTPGETPUT_LONG_OPTIONS( \ "\n -v Verbose" \ "\n -u USER Username" \ "\n -p PASS Password" \ "\n -P NUM Port number" \ ) \ #define hostname_trivial_usage \ "[OPTIONS] [HOSTNAME | -F FILE]" \ #define hostname_full_usage "\n\n" \ "Get or set hostname or DNS domain name\n" \ "\n -s Short" \ "\n -i Addresses for the hostname" \ "\n -d DNS domain name" \ "\n -f Fully qualified domain name" \ "\n -F FILE Use FILE's content as hostname" \ #define hostname_example_usage \ "$ hostname\n" \ "sage\n" \ #define dnsdomainname_trivial_usage NOUSAGE_STR \ #define dnsdomainname_full_usage "" \ #define httpd_trivial_usage \ "[-ifv[v]]" \ " [-c CONFFILE]" \ " [-p [IP:]PORT]" \ IF_FEATURE_HTTPD_SETUID(" [-u USER[:GRP]]") \ IF_FEATURE_HTTPD_BASIC_AUTH(" [-r REALM]") \ " [-h HOME]\n" \ "or httpd -d/-e" IF_FEATURE_HTTPD_AUTH_MD5("/-m") " STRING" \ #define httpd_full_usage "\n\n" \ "Listen for incoming HTTP requests\n" \ "\n -i Inetd mode" \ "\n -f Don't daemonize" \ "\n -v[v] Verbose" \ "\n -p [IP:]PORT Bind to IP:PORT (default *:80)" \ IF_FEATURE_HTTPD_SETUID( \ "\n -u USER[:GRP] Set uid/gid after binding to port") \ IF_FEATURE_HTTPD_BASIC_AUTH( \ "\n -r REALM Authentication Realm for Basic Authentication") \ "\n -h HOME Home directory (default .)" \ "\n -c FILE Configuration file (default {/etc,HOME}/httpd.conf)" \ IF_FEATURE_HTTPD_AUTH_MD5( \ "\n -m STRING MD5 crypt STRING") \ "\n -e STRING HTML encode STRING" \ "\n -d STRING URL decode STRING" \ #define ifconfig_trivial_usage \ IF_FEATURE_IFCONFIG_STATUS("[-a]") " interface [address]" \ #define ifconfig_full_usage "\n\n" \ "Configure a network interface\n" \ "\n" \ IF_FEATURE_IPV6( \ " [add ADDRESS[/PREFIXLEN]]\n") \ IF_FEATURE_IPV6( \ " [del ADDRESS[/PREFIXLEN]]\n") \ " [[-]broadcast [ADDRESS]] [[-]pointopoint [ADDRESS]]\n" \ " [netmask ADDRESS] [dstaddr ADDRESS]\n" \ IF_FEATURE_IFCONFIG_SLIP( \ " [outfill NN] [keepalive NN]\n") \ " " IF_FEATURE_IFCONFIG_HW("[hw ether" IF_FEATURE_HWIB("|infiniband")" ADDRESS] ") "[metric NN] [mtu NN]\n" \ " [[-]trailers] [[-]arp] [[-]allmulti]\n" \ " [multicast] [[-]promisc] [txqueuelen NN] [[-]dynamic]\n" \ IF_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \ " [mem_start NN] [io_addr NN] [irq NN]\n") \ " [up|down] ..." \ #define ifenslave_trivial_usage \ "[-cdf] MASTER_IFACE SLAVE_IFACE..." \ #define ifenslave_full_usage "\n\n" \ "Configure network interfaces for parallel routing\n" \ "\n -c,--change-active Change active slave" \ "\n -d,--detach Remove slave interface from bonding device" \ "\n -f,--force Force, even if interface is not Ethernet" \ #define ifenslave_example_usage \ "To create a bond device, simply follow these three steps:\n" \ "- ensure that the required drivers are properly loaded:\n" \ " # modprobe bonding ; modprobe <3c59x|eepro100|pcnet32|tulip|...>\n" \ "- assign an IP address to the bond device:\n" \ " # ifconfig bond0 netmask broadcast \n" \ "- attach all the interfaces you need to the bond device:\n" \ " # ifenslave bond0 eth0 eth1 eth2\n" \ " If bond0 didn't have a MAC address, it will take eth0's. Then, all\n" \ " interfaces attached AFTER this assignment will get the same MAC addr.\n\n" \ " To detach a dead interface without setting the bond device down:\n" \ " # ifenslave -d bond0 eth1\n\n" \ " To set the bond device down and automatically release all the slaves:\n" \ " # ifconfig bond0 down\n\n" \ " To change active slave:\n" \ " # ifenslave -c bond0 eth0\n" \ #define ifplugd_trivial_usage \ "[OPTIONS]" \ #define ifplugd_full_usage "\n\n" \ "Network interface plug detection daemon\n" \ "\n -n Don't daemonize" \ "\n -s Don't log to syslog" \ "\n -i IFACE Interface" \ "\n -f/-F Treat link detection error as link down/link up" \ "\n (otherwise exit on error)" \ "\n -a Don't up interface at each link probe" \ "\n -M Monitor creation/destruction of interface" \ "\n (otherwise it must exist)" \ "\n -r PROG Script to run" \ "\n -x ARG Extra argument for script" \ "\n -I Don't exit on nonzero exit code from script" \ "\n -p Don't run \"up\" script on startup" \ "\n -q Don't run \"down\" script on exit" \ "\n -l Always run script on startup" \ "\n -t SECS Poll time in seconds" \ "\n -u SECS Delay before running script after link up" \ "\n -d SECS Delay after link down" \ "\n -m MODE API mode (mii, priv, ethtool, wlan, iff, auto)" \ "\n -k Kill running daemon" \ #define ifup_trivial_usage \ "[-an"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] [-i FILE] IFACE..." \ #define ifup_full_usage "\n\n" \ " -a De/configure all interfaces automatically" \ "\n -i FILE Use FILE for interface definitions" \ "\n -n Print out what would happen, but don't do it" \ IF_FEATURE_IFUPDOWN_MAPPING( \ "\n (note: doesn't disable mappings)" \ "\n -m Don't run any mappings" \ ) \ "\n -v Print out what would happen before doing it" \ "\n -f Force de/configuration" \ #define ifdown_trivial_usage \ "[-an"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] [-i FILE] IFACE..." \ #define ifdown_full_usage "\n\n" \ " -a De/configure all interfaces automatically" \ "\n -i FILE Use FILE for interface definitions" \ "\n -n Print out what would happen, but don't do it" \ IF_FEATURE_IFUPDOWN_MAPPING( \ "\n (note: doesn't disable mappings)" \ "\n -m Don't run any mappings" \ ) \ "\n -v Print out what would happen before doing it" \ "\n -f Force de/configuration" \ #define inetd_trivial_usage \ "[-fe] [-q N] [-R N] [CONFFILE]" \ #define inetd_full_usage "\n\n" \ "Listen for network connections and launch programs\n" \ "\n -f Run in foreground" \ "\n -e Log to stderr" \ "\n -q N Socket listen queue (default: 128)" \ "\n -R N Pause services after N connects/min" \ "\n (default: 0 - disabled)" \ #define ip_trivial_usage \ "[OPTIONS] {" \ IF_FEATURE_IP_ADDRESS("address | ") \ IF_FEATURE_IP_ROUTE("route | ") \ IF_FEATURE_IP_LINK("link | ") \ IF_FEATURE_IP_TUNNEL("tunnel | ") \ IF_FEATURE_IP_RULE("rule") \ "} {COMMAND}" \ #define ip_full_usage "\n\n" \ "ip [OPTIONS] OBJECT {COMMAND}\n" \ "where OBJECT := {" \ IF_FEATURE_IP_ADDRESS("address | ") \ IF_FEATURE_IP_ROUTE("route | ") \ IF_FEATURE_IP_LINK("link | ") \ IF_FEATURE_IP_TUNNEL("tunnel | ") \ IF_FEATURE_IP_RULE("rule") \ "}\n" \ "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }" \ #define ipaddr_trivial_usage \ "{ {add|del} IFADDR dev STRING | {show|flush}\n" \ " [dev STRING] [to PREFIX] }" \ #define ipaddr_full_usage "\n\n" \ "ipaddr {add|delete} IFADDR dev STRING\n" \ "ipaddr {show|flush} [dev STRING] [scope SCOPE-ID]\n" \ " [to PREFIX] [label PATTERN]\n" \ " IFADDR := PREFIX | ADDR peer PREFIX\n" \ " [broadcast ADDR] [anycast ADDR]\n" \ " [label STRING] [scope SCOPE-ID]\n" \ " SCOPE-ID := [host | link | global | NUMBER]" \ #define iplink_trivial_usage \ "{ set DEVICE { up | down | arp { on | off } | show [DEVICE] }" \ #define iplink_full_usage "\n\n" \ "iplink set DEVICE { up | down | arp | multicast { on | off } |\n" \ " dynamic { on | off } |\n" \ " mtu MTU }\n" \ "iplink show [DEVICE]" \ #define iproute_trivial_usage \ "{ list | flush | add | del | change | append |\n" \ " replace | test } ROUTE" \ #define iproute_full_usage "\n\n" \ "iproute { list | flush } SELECTOR\n" \ "iproute get ADDRESS [from ADDRESS iif STRING]\n" \ " [oif STRING] [tos TOS]\n" \ "iproute { add | del | change | append | replace | test } ROUTE\n" \ " SELECTOR := [root PREFIX] [match PREFIX] [proto RTPROTO]\n" \ " ROUTE := [TYPE] PREFIX [tos TOS] [proto RTPROTO] [metric METRIC]" \ #define iprule_trivial_usage \ "{[list | add | del] RULE}" \ #define iprule_full_usage "\n\n" \ "iprule [list | add | del] SELECTOR ACTION\n" \ " SELECTOR := [from PREFIX] [to PREFIX] [tos TOS] [fwmark FWMARK]\n" \ " [dev STRING] [pref NUMBER]\n" \ " ACTION := [table TABLE_ID] [nat ADDRESS]\n" \ " [prohibit | reject | unreachable]\n" \ " [realms [SRCREALM/]DSTREALM]\n" \ " TABLE_ID := [local | main | default | NUMBER]" \ #define iptunnel_trivial_usage \ "{ add | change | del | show } [NAME]\n" \ " [mode { ipip | gre | sit }]\n" \ " [remote ADDR] [local ADDR] [ttl TTL]" \ #define iptunnel_full_usage "\n\n" \ "iptunnel { add | change | del | show } [NAME]\n" \ " [mode { ipip | gre | sit }] [remote ADDR] [local ADDR]\n" \ " [[i|o]seq] [[i|o]key KEY] [[i|o]csum]\n" \ " [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]" \ #define ipcalc_trivial_usage \ "[OPTIONS] ADDRESS[[/]NETMASK] [NETMASK]" \ #define ipcalc_full_usage "\n\n" \ "Calculate IP network settings from a IP address\n" \ IF_FEATURE_IPCALC_LONG_OPTIONS( \ "\n -b,--broadcast Display calculated broadcast address" \ "\n -n,--network Display calculated network address" \ "\n -m,--netmask Display default netmask for IP" \ IF_FEATURE_IPCALC_FANCY( \ "\n -p,--prefix Display the prefix for IP/NETMASK" \ "\n -h,--hostname Display first resolved host name" \ "\n -s,--silent Don't ever display error messages" \ ) \ ) \ IF_NOT_FEATURE_IPCALC_LONG_OPTIONS( \ "\n -b Display calculated broadcast address" \ "\n -n Display calculated network address" \ "\n -m Display default netmask for IP" \ IF_FEATURE_IPCALC_FANCY( \ "\n -p Display the prefix for IP/NETMASK" \ "\n -h Display first resolved host name" \ "\n -s Don't ever display error messages" \ ) \ ) \ #define fakeidentd_trivial_usage \ "[-fiw] [-b ADDR] [STRING]" \ #define fakeidentd_full_usage "\n\n" \ "Provide fake ident (auth) service\n" \ "\n -f Run in foreground" \ "\n -i Inetd mode" \ "\n -w Inetd 'wait' mode" \ "\n -b ADDR Bind to specified address" \ "\n STRING Ident answer string (default: nobody)" \ #define nameif_trivial_usage \ IF_NOT_FEATURE_NAMEIF_EXTENDED( \ "[-s] [-c FILE] [IFNAME HWADDR]..." \ ) \ IF_FEATURE_NAMEIF_EXTENDED( \ "[-s] [-c FILE] [IFNAME SELECTOR]..." \ ) \ #define nameif_full_usage "\n\n" \ "Rename network interface while it in the down state." \ IF_NOT_FEATURE_NAMEIF_EXTENDED( \ "\nThe device with address HWADDR is renamed to IFACE." \ ) \ IF_FEATURE_NAMEIF_EXTENDED( \ "\nThe device matched by SELECTOR is renamed to IFACE." \ "\nSELECTOR can be a combination of:" \ "\n driver=STRING" \ "\n bus=STRING" \ "\n phy_address=NUM" \ "\n [mac=]XX:XX:XX:XX:XX:XX" \ ) \ "\n" \ "\n -c FILE Configuration file (default: /etc/mactab)" \ "\n -s Log to syslog" \ #define nameif_example_usage \ "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \ " or\n" \ "$ nameif -c /etc/my_mactab_file\n" \ #define nbdclient_trivial_usage \ "HOST PORT BLOCKDEV" \ #define nbdclient_full_usage "\n\n" \ "Connect to HOST and provide a network block device on BLOCKDEV" \ #if ENABLE_NC_110_COMPAT \ #define nc_trivial_usage \ "[OPTIONS] HOST PORT - connect" \ IF_NC_SERVER("\n" \ "nc [OPTIONS] -l -p PORT [HOST] [PORT] - listen" \ ) \ #define nc_full_usage "\n\n" \ " -e PROG Run PROG after connect (must be last)" \ IF_NC_SERVER( \ "\n -l Listen mode, for inbound connects" \ ) \ "\n -p PORT Local port" \ "\n -s ADDR Local address" \ "\n -w SEC Timeout for connects and final net reads" \ IF_NC_EXTRA( \ "\n -i SEC Delay interval for lines sent" /* ", ports scanned" */ \ ) \ "\n -n Don't do DNS resolution" \ "\n -u UDP mode" \ "\n -v Verbose" \ IF_NC_EXTRA( \ "\n -o FILE Hex dump traffic" \ "\n -z Zero-I/O mode (scanning)" \ ) \ #endif \ #if !ENABLE_NC_110_COMPAT \ #if ENABLE_NC_SERVER || ENABLE_NC_EXTRA \ #define NC_OPTIONS_STR "\n" \ #else \ #define NC_OPTIONS_STR \ #endif \ #define nc_trivial_usage \ IF_NC_EXTRA("[-iN] [-wN] ")IF_NC_SERVER("[-l] [-p PORT] ") \ "["IF_NC_EXTRA("-f FILE|")"IPADDR PORT]"IF_NC_EXTRA(" [-e PROG]") \ #define nc_full_usage "\n\n" \ "Open a pipe to IP:PORT" IF_NC_EXTRA(" or FILE") \ NC_OPTIONS_STR \ IF_NC_EXTRA( \ "\n -e PROG Run PROG after connect" \ IF_NC_SERVER( \ "\n -l Listen mode, for inbound connects" \ IF_NC_EXTRA( \ "\n (use -l twice with -e for persistent server)") \ "\n -p PORT Local port" \ ) \ "\n -w SEC Timeout for connect" \ "\n -i SEC Delay interval for lines sent" \ "\n -f FILE Use file (ala /dev/ttyS0) instead of network" \ ) \ #define nc_notes_usage "" \ IF_NC_EXTRA( \ "To use netcat as a terminal emulator on a serial port:\n\n" \ "$ stty 115200 -F /dev/ttyS0\n" \ "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \ ) \ #define nc_example_usage \ "$ nc foobar.somedomain.com 25\n" \ "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \ "help\n" \ "214-Commands supported:\n" \ "214- HELO EHLO MAIL RCPT DATA AUTH\n" \ "214 NOOP QUIT RSET HELP\n" \ "quit\n" \ "221 foobar closing connection\n" \ #endif \ #define netstat_trivial_usage \ "[-"IF_ROUTE("r")"al] [-tuwx] [-en"IF_FEATURE_NETSTAT_WIDE("W")IF_FEATURE_NETSTAT_PRG("p")"]" \ #define netstat_full_usage "\n\n" \ "Display networking information\n" \ IF_ROUTE( \ "\n -r Routing table" \ ) \ "\n -a All sockets" \ "\n -l Listening sockets" \ "\n Else: connected sockets" \ "\n -t TCP sockets" \ "\n -u UDP sockets" \ "\n -w Raw sockets" \ "\n -x Unix sockets" \ "\n Else: all socket types" \ "\n -e Other/more information" \ "\n -n Don't resolve names" \ IF_FEATURE_NETSTAT_WIDE( \ "\n -W Wide display" \ ) \ IF_FEATURE_NETSTAT_PRG( \ "\n -p Show PID/program name for sockets" \ ) \ #define nslookup_trivial_usage \ "[HOST] [SERVER]" \ #define nslookup_full_usage "\n\n" \ "Query the nameserver for the IP address of the given HOST\n" \ "optionally using a specified DNS server" \ #define nslookup_example_usage \ "$ nslookup localhost\n" \ "Server: default\n" \ "Address: default\n" \ "\n" \ "Name: debian\n" \ "Address: 127.0.0.1\n" \ #define ntpd_trivial_usage \ "[-dnqNw"IF_FEATURE_NTPD_SERVER("l")"] [-S PROG] [-p PEER]..." \ #define ntpd_full_usage "\n\n" \ "NTP client/server\n" \ "\n -d Verbose" \ "\n -n Do not daemonize" \ "\n -q Quit after clock is set" \ "\n -N Run at high priority" \ "\n -w Do not set time (only query peers), implies -n" \ IF_FEATURE_NTPD_SERVER( \ "\n -l Run as server on port 123" \ ) \ "\n -S PROG Run PROG after stepping time, stratum change, and every 11 mins" \ "\n -p PEER Obtain time from PEER (may be repeated)" \ #if !ENABLE_FEATURE_FANCY_PING \ # define ping_trivial_usage \ "HOST" \ # define ping_full_usage "\n\n" \ "Send ICMP ECHO_REQUEST packets to network hosts" \ # define ping6_trivial_usage \ "HOST" \ # define ping6_full_usage "\n\n" \ "Send ICMP ECHO_REQUEST packets to network hosts" \ #else \ # define ping_trivial_usage \ "[OPTIONS] HOST" \ # define ping_full_usage "\n\n" \ "Send ICMP ECHO_REQUEST packets to network hosts\n" \ "\n -4,-6 Force IP or IPv6 name resolution" \ "\n -c CNT Send only CNT pings" \ "\n -s SIZE Send SIZE data bytes in packets (default:56)" \ "\n -t TTL Set TTL" \ "\n -I IFACE/IP Use interface or IP address as source" \ "\n -W SEC Seconds to wait for the first response (default:10)" \ "\n (after all -c CNT packets are sent)" \ "\n -w SEC Seconds until ping exits (default:infinite)" \ "\n (can exit earlier with -c CNT)" \ "\n -q Quiet, only displays output at start" \ "\n and when finished" \ # define ping6_trivial_usage \ "[OPTIONS] HOST" \ # define ping6_full_usage "\n\n" \ "Send ICMP ECHO_REQUEST packets to network hosts\n" \ "\n -c CNT Send only CNT pings" \ "\n -s SIZE Send SIZE data bytes in packets (default:56)" \ "\n -I IFACE/IP Use interface or IP address as source" \ "\n -q Quiet, only displays output at start" \ "\n and when finished" \ #endif \ #define ping_example_usage \ "$ ping localhost\n" \ "PING slag (127.0.0.1): 56 data bytes\n" \ "64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \ "\n" \ "--- debian ping statistics ---\n" \ "1 packets transmitted, 1 packets received, 0% packet loss\n" \ "round-trip min/avg/max = 20.1/20.1/20.1 ms\n" \ #define ping6_example_usage \ "$ ping6 ip6-localhost\n" \ "PING ip6-localhost (::1): 56 data bytes\n" \ "64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \ "\n" \ "--- ip6-localhost ping statistics ---\n" \ "1 packets transmitted, 1 packets received, 0% packet loss\n" \ "round-trip min/avg/max = 20.1/20.1/20.1 ms\n" \ #define pscan_trivial_usage \ "[-cb] [-p MIN_PORT] [-P MAX_PORT] [-t TIMEOUT] [-T MIN_RTT] HOST" \ #define pscan_full_usage "\n\n" \ "Scan a host, print all open ports\n" \ "\n -c Show closed ports too" \ "\n -b Show blocked ports too" \ "\n -p Scan from this port (default 1)" \ "\n -P Scan up to this port (default 1024)" \ "\n -t Timeout (default 5000 ms)" \ "\n -T Minimum rtt (default 5 ms, increase for congested hosts)" \ #define route_trivial_usage \ "[{add|del|delete}]" \ #define route_full_usage "\n\n" \ "Edit kernel routing tables\n" \ "\n -n Don't resolve names" \ "\n -e Display other/more information" \ "\n -A inet" IF_FEATURE_IPV6("{6}") " Select address family" \ #define slattach_trivial_usage \ "[-cehmLF] [-s SPEED] [-p PROTOCOL] DEVICE" \ #define slattach_full_usage "\n\n" \ "Attach network interface(s) to serial line(s)\n" \ "\n -p PROT Set protocol (slip, cslip, slip6, clisp6 or adaptive)" \ "\n -s SPD Set line speed" \ "\n -e Exit after initializing device" \ "\n -h Exit when the carrier is lost" \ "\n -c PROG Run PROG when the line is hung up" \ "\n -m Do NOT initialize the line in raw 8 bits mode" \ "\n -L Enable 3-wire operation" \ "\n -F Disable RTS/CTS flow control" \ #define tc_trivial_usage \ "OBJECT CMD [dev STRING]" \ #define tc_full_usage "\n\n" \ "OBJECT: {qdisc|class|filter}\n" \ "CMD: {add|del|change|replace|show}\n" \ "\n" \ "qdisc [ handle QHANDLE ] [ root |"IF_FEATURE_TC_INGRESS(" ingress |")" parent CLASSID ]\n" \ " [ [ QDISC_KIND ] [ help | OPTIONS ] ]\n" \ " QDISC_KIND := { [p|b]fifo | tbf | prio | cbq | red | etc. }\n" \ "qdisc show [ dev STRING ]"IF_FEATURE_TC_INGRESS(" [ingress]")"\n" \ "class [ classid CLASSID ] [ root | parent CLASSID ]\n" \ " [ [ QDISC_KIND ] [ help | OPTIONS ] ]\n" \ "class show [ dev STRING ] [ root | parent CLASSID ]\n" \ "filter [ pref PRIO ] [ protocol PROTO ]\n" \ " [ root | classid CLASSID ] [ handle FILTERID ]\n" \ " [ [ FILTER_TYPE ] [ help | OPTIONS ] ]\n" \ "filter show [ dev STRING ] [ root | parent CLASSID ]" \ #define tcpsvd_trivial_usage \ "[-hEv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] IP PORT PROG" \ #define tcpsvd_full_usage "\n\n" \ "Create TCP socket, bind to IP:PORT and listen\n" \ "for incoming connection. Run PROG for each connection.\n" \ "\n IP IP to listen on, 0 = all" \ "\n PORT Port to listen on" \ "\n PROG ARGS Program to run" \ "\n -l NAME Local hostname (else looks up local hostname in DNS)" \ "\n -u USER[:GRP] Change to user/group after bind" \ "\n -c N Handle up to N connections simultaneously" \ "\n -b N Allow a backlog of approximately N TCP SYNs" \ "\n -C N[:MSG] Allow only up to N connections from the same IP" \ "\n New connections from this IP address are closed" \ "\n immediately. MSG is written to the peer before close" \ "\n -h Look up peer's hostname" \ "\n -E Don't set up environment variables" \ "\n -v Verbose" \ #define udpsvd_trivial_usage \ "[-hEv] [-c N] [-u USER] [-l NAME] IP PORT PROG" \ #define udpsvd_full_usage "\n\n" \ "Create UDP socket, bind to IP:PORT and wait\n" \ "for incoming packets. Run PROG for each packet,\n" \ "redirecting all further packets with same peer ip:port to it.\n" \ "\n IP IP to listen on, 0 = all" \ "\n PORT Port to listen on" \ "\n PROG ARGS Program to run" \ "\n -l NAME Local hostname (else looks up local hostname in DNS)" \ "\n -u USER[:GRP] Change to user/group after bind" \ "\n -c N Handle up to N connections simultaneously" \ "\n -h Look up peer's hostname" \ "\n -E Don't set up environment variables" \ "\n -v Verbose" \ #if ENABLE_FEATURE_TELNET_AUTOLOGIN \ #define telnet_trivial_usage \ "[-a] [-l USER] HOST [PORT]" \ #define telnet_full_usage "\n\n" \ "Connect to telnet server\n" \ "\n -a Automatic login with $USER variable" \ "\n -l USER Automatic login as USER" \ #else \ #define telnet_trivial_usage \ "HOST [PORT]" \ #define telnet_full_usage "\n\n" \ "Connect to telnet server" \ #endif \ #define telnetd_trivial_usage \ "[OPTIONS]" \ #define telnetd_full_usage "\n\n" \ "Handle incoming telnet connections" \ IF_NOT_FEATURE_TELNETD_STANDALONE(" via inetd") "\n" \ "\n -l LOGIN Exec LOGIN on connect" \ "\n -f ISSUE_FILE Display ISSUE_FILE instead of /etc/issue" \ "\n -K Close connection as soon as login exits" \ "\n (normally wait until all programs close slave pty)" \ IF_FEATURE_TELNETD_STANDALONE( \ "\n -p PORT Port to listen on" \ "\n -b ADDR[:PORT] Address to bind to" \ "\n -F Run in foreground" \ "\n -i Inetd mode" \ IF_FEATURE_TELNETD_INETD_WAIT( \ "\n -w SEC Inetd 'wait' mode, linger time SEC" \ "\n -S Log to syslog (implied by -i or without -F and -w)" \ ) \ ) \ #define tftp_trivial_usage \ "[OPTIONS] HOST [PORT]" \ #define tftp_full_usage "\n\n" \ "Transfer a file from/to tftp server\n" \ "\n -l FILE Local FILE" \ "\n -r FILE Remote FILE" \ IF_FEATURE_TFTP_GET( \ "\n -g Get file" \ ) \ IF_FEATURE_TFTP_PUT( \ "\n -p Put file" \ ) \ IF_FEATURE_TFTP_BLOCKSIZE( \ "\n -b SIZE Transfer blocks of SIZE octets" \ ) \ #define tftpd_trivial_usage \ "[-cr] [-u USER] [DIR]" \ #define tftpd_full_usage "\n\n" \ "Transfer a file on tftp client's request\n" \ "\n" \ "tftpd should be used as an inetd service.\n" \ "tftpd's line for inetd.conf:\n" \ " 69 dgram udp nowait root tftpd tftpd -l /files/to/serve\n" \ "It also can be ran from udpsvd:\n" \ " udpsvd -vE 0.0.0.0 69 tftpd /files/to/serve\n" \ "\n -r Prohibit upload" \ "\n -c Allow file creation via upload" \ "\n -u Access files as USER" \ "\n -l Log to syslog (inetd mode requires this)" \ #define traceroute_trivial_usage \ "[-"IF_TRACEROUTE6("46")"FIldnrv] [-f 1ST_TTL] [-m MAXTTL] [-p PORT] [-q PROBES]\n" \ " [-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-g GATEWAY] [-i IFACE]\n" \ " [-z PAUSE_MSEC] HOST [BYTES]" \ #define traceroute_full_usage "\n\n" \ "Trace the route to HOST\n" \ IF_TRACEROUTE6( \ "\n -4,-6 Force IP or IPv6 name resolution" \ ) \ "\n -F Set the don't fragment bit" \ "\n -I Use ICMP ECHO instead of UDP datagrams" \ "\n -l Display the TTL value of the returned packet" \ "\n -d Set SO_DEBUG options to socket" \ "\n -n Print numeric addresses" \ "\n -r Bypass routing tables, send directly to HOST" \ "\n -v Verbose" \ "\n -m Max time-to-live (max number of hops)" \ "\n -p Base UDP port number used in probes" \ "\n (default 33434)" \ "\n -q Number of probes per TTL (default 3)" \ "\n -s IP address to use as the source address" \ "\n -t Type-of-service in probe packets (default 0)" \ "\n -w Time in seconds to wait for a response (default 3)" \ "\n -g Loose source route gateway (8 max)" \ #define traceroute6_trivial_usage \ "[-dnrv] [-m MAXTTL] [-p PORT] [-q PROBES]\n" \ " [-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-i IFACE]\n" \ " HOST [BYTES]" \ #define traceroute6_full_usage "\n\n" \ "Trace the route to HOST\n" \ "\n -d Set SO_DEBUG options to socket" \ "\n -n Print numeric addresses" \ "\n -r Bypass routing tables, send directly to HOST" \ "\n -v Verbose" \ "\n -m Max time-to-live (max number of hops)" \ "\n -p Base UDP port number used in probes" \ "\n (default is 33434)" \ "\n -q Number of probes per TTL (default 3)" \ "\n -s IP address to use as the source address" \ "\n -t Type-of-service in probe packets (default 0)" \ "\n -w Time in seconds to wait for a response (default 3)" \ #define tunctl_trivial_usage \ "[-f device] ([-t name] | -d name)" IF_FEATURE_TUNCTL_UG(" [-u owner] [-g group] [-b]") \ #define tunctl_full_usage "\n\n" \ "Create or delete tun interfaces\n" \ "\n -f name tun device (/dev/net/tun)" \ "\n -t name Create iface 'name'" \ "\n -d name Delete iface 'name'" \ IF_FEATURE_TUNCTL_UG( \ "\n -u owner Set iface owner" \ "\n -g group Set iface group" \ "\n -b Brief output" \ ) \ #define tunctl_example_usage \ "# tunctl\n" \ "# tunctl -d tun0\n" \ #define vconfig_trivial_usage \ "COMMAND [OPTIONS]" \ #define vconfig_full_usage "\n\n" \ "Create and remove virtual ethernet devices\n" \ "\n add IFACE VLAN_ID" \ "\n rem VLAN_NAME" \ "\n set_flag IFACE 0|1 VLAN_QOS" \ "\n set_egress_map VLAN_NAME SKB_PRIO VLAN_QOS" \ "\n set_ingress_map VLAN_NAME SKB_PRIO VLAN_QOS" \ "\n set_name_type NAME_TYPE" \ #define wget_trivial_usage \ IF_FEATURE_WGET_LONG_OPTIONS( \ "[-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document FILE]\n" \ " [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \ " [-U|--user-agent AGENT]" IF_FEATURE_WGET_TIMEOUT(" [-T SEC]") " URL..." \ ) \ IF_NOT_FEATURE_WGET_LONG_OPTIONS( \ "[-csq] [-O FILE] [-Y on/off] [-P DIR] [-U AGENT]" \ IF_FEATURE_WGET_TIMEOUT(" [-T SEC]") " URL..." \ ) \ #define wget_full_usage "\n\n" \ "Retrieve files via HTTP or FTP\n" \ "\n -s Spider mode - only check file existence" \ "\n -c Continue retrieval of aborted transfer" \ "\n -q Quiet" \ "\n -P DIR Save to DIR (default .)" \ IF_FEATURE_WGET_TIMEOUT( \ "\n -T SEC Network read timeout is SEC seconds" \ ) \ "\n -O FILE Save to FILE ('-' for stdout)" \ "\n -U STR Use STR for User-Agent header" \ "\n -Y Use proxy ('on' or 'off')" \ #define zcip_trivial_usage \ "[OPTIONS] IFACE SCRIPT" \ #define zcip_full_usage "\n\n" \ "Manage a ZeroConf IPv4 link-local address\n" \ "\n -f Run in foreground" \ "\n -q Quit after obtaining address" \ "\n -r 169.254.x.x Request this address first" \ "\n -v Verbose" \ "\n" \ "\nWith no -q, runs continuously monitoring for ARP conflicts," \ "\nexits only on I/O errors (link down etc)" \ #define lpd_trivial_usage \ "SPOOLDIR [HELPER [ARGS]]" \ #define lpd_full_usage "\n\n" \ "SPOOLDIR must contain (symlinks to) device nodes or directories" \ "\nwith names matching print queue names. In the first case, jobs are" \ "\nsent directly to the device. Otherwise each job is stored in queue" \ "\ndirectory and HELPER program is called. Name of file to print" \ "\nis passed in $DATAFILE variable." \ "\nExample:" \ "\n tcpsvd -E 0 515 softlimit -m 999999 lpd /var/spool ./print" \ #define lpr_trivial_usage \ "-P queue[@host[:port]] -U USERNAME -J TITLE -Vmh [FILE]..." \ #define lpr_full_usage "\n\n" \ " -P lp service to connect to (else uses $PRINTER)" \ "\n -m Send mail on completion" \ "\n -h Print banner page too" \ "\n -V Verbose" \ #define lpq_trivial_usage \ "[-P queue[@host[:port]]] [-U USERNAME] [-d JOBID]... [-fs]" \ #define lpq_full_usage "\n\n" \ " -P lp service to connect to (else uses $PRINTER)" \ "\n -d Delete jobs" \ "\n -f Force any waiting job to be printed" \ "\n -s Short display" \ #define free_trivial_usage \ "" IF_DESKTOP("[-b/k/m/g]") \ #define free_full_usage "\n\n" \ "Display the amount of free and used system memory" \ #define free_example_usage \ "$ free\n" \ " total used free shared buffers\n" \ " Mem: 257628 248724 8904 59644 93124\n" \ " Swap: 128516 8404 120112\n" \ "Total: 386144 257128 129016\n" \ #define fuser_trivial_usage \ "[OPTIONS] FILE or PORT/PROTO" \ #define fuser_full_usage "\n\n" \ "Find processes which use FILEs or PORTs\n" \ "\n -m Find processes which use same fs as FILEs" \ "\n -4,-6 Search only IPv4/IPv6 space" \ "\n -s Don't display PIDs" \ "\n -k Kill found processes" \ "\n -SIGNAL Signal to send (default: KILL)" \ #define iostat_trivial_usage \ "[-c] [-d] [-t] [-z] [-k|-m] [ALL|BLOCKDEV...] [INTERVAL [COUNT]]" \ #define iostat_full_usage "\n\n" \ "Report CPU and I/O statistics\n" \ "\n -c Show CPU utilization" \ "\n -d Show device utilization" \ "\n -t Print current time" \ "\n -z Omit devices with no activity" \ "\n -k Use kb/s" \ "\n -m Use Mb/s" \ #define kill_trivial_usage \ "[-l] [-SIG] PID..." \ #define kill_full_usage "\n\n" \ "Send a signal (default: TERM) to given PIDs\n" \ "\n -l List all signal names and numbers" \ #define kill_example_usage \ "$ ps | grep apache\n" \ "252 root root S [apache]\n" \ "263 www-data www-data S [apache]\n" \ "264 www-data www-data S [apache]\n" \ "265 www-data www-data S [apache]\n" \ "266 www-data www-data S [apache]\n" \ "267 www-data www-data S [apache]\n" \ "$ kill 252\n" \ #define killall_trivial_usage \ "[-l] [-q] [-SIG] PROCESS_NAME..." \ #define killall_full_usage "\n\n" \ "Send a signal (default: TERM) to given processes\n" \ "\n -l List all signal names and numbers" \ "\n -q Don't complain if no processes were killed" \ #define killall_example_usage \ "$ killall apache\n" \ #define killall5_trivial_usage \ "[-l] [-SIG] [-o PID]..." \ #define killall5_full_usage "\n\n" \ "Send a signal (default: TERM) to all processes outside current session\n" \ "\n -l List all signal names and numbers" \ "\n -o PID Don't signal this PID" \ #define mpstat_trivial_usage \ "[-A] [-I SUM|CPU|ALL|SCPU] [-u] [-P num|ALL] [INTERVAL [COUNT]]" \ #define mpstat_full_usage "\n\n" \ "Per-processor statistics\n" \ "\n -A Same as -I ALL -u -P ALL" \ "\n -I SUM|CPU|ALL|SCPU Report interrupt statistics" \ "\n -P num|ALL Processor to monitor" \ "\n -u Report CPU utilization" \ #define nmeter_trivial_usage \ "[-d MSEC] FORMAT_STRING" \ #define nmeter_full_usage "\n\n" \ "Monitor system in real time" \ "\n" \ "\n -d MSEC Milliseconds between updates (default:1000)" \ "\n" \ "\nFormat specifiers:" \ "\n %Nc or %[cN] CPU. N - bar size (default:10)" \ "\n (displays: S:system U:user N:niced D:iowait I:irq i:softirq)" \ "\n %[nINTERFACE] Network INTERFACE" \ "\n %m Allocated memory" \ "\n %[mf] Free memory" \ "\n %[mt] Total memory" \ "\n %s Allocated swap" \ "\n %f Number of used file descriptors" \ "\n %Ni Total/specific IRQ rate" \ "\n %x Context switch rate" \ "\n %p Forks" \ "\n %[pn] # of processes" \ "\n %b Block io" \ "\n %Nt Time (with N decimal points)" \ "\n %r Print instead of at EOL" \ #define pgrep_trivial_usage \ "[-flnovx] [-s SID|-P PPID|PATTERN]" \ #define pgrep_full_usage "\n\n" \ "Display process(es) selected by regex PATTERN\n" \ "\n -l Show command name too" \ "\n -f Match against entire command line" \ "\n -n Show the newest process only" \ "\n -o Show the oldest process only" \ "\n -v Negate the match" \ "\n -x Match whole name (not substring)" \ "\n -s Match session ID (0 for current)" \ "\n -P Match parent process ID" \ #define pkill_trivial_usage \ "[-l|-SIGNAL] [-fnovx] [-s SID|-P PPID|PATTERN]" \ #define pkill_full_usage "\n\n" \ "Send a signal to process(es) selected by regex PATTERN\n" \ "\n -l List all signals" \ "\n -f Match against entire command line" \ "\n -n Signal the newest process only" \ "\n -o Signal the oldest process only" \ "\n -v Negate the match" \ "\n -x Match whole name (not substring)" \ "\n -s Match session ID (0 for current)" \ "\n -P Match parent process ID" \ #if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT) \ #define pidof_trivial_usage \ "[OPTIONS] [NAME]..." \ #define USAGE_PIDOF "\n" \ #else \ #define pidof_trivial_usage \ "[NAME]..." \ #define USAGE_PIDOF /* none */ \ #endif \ #define pidof_full_usage "\n\n" \ "List PIDs of all processes with names that match NAMEs" \ USAGE_PIDOF \ IF_FEATURE_PIDOF_SINGLE( \ "\n -s Show only one PID" \ ) \ IF_FEATURE_PIDOF_OMIT( \ "\n -o PID Omit given pid" \ "\n Use %PPID to omit pid of pidof's parent" \ ) \ #define pidof_example_usage \ "$ pidof init\n" \ "1\n" \ IF_FEATURE_PIDOF_OMIT( \ "$ pidof /bin/sh\n20351 5973 5950\n") \ IF_FEATURE_PIDOF_OMIT( \ "$ pidof /bin/sh -o %PPID\n20351 5950") \ #define pmap_trivial_usage \ "[-xq] PID" \ #define pmap_full_usage "\n\n" \ "Display detailed process memory usage" \ "\n" \ "\n -x Show details" \ "\n -q Quiet" \ #define powertop_trivial_usage \ "" \ #define powertop_full_usage "\n\n" \ "Analyze power consumption on Intel-based laptops\n" \ #if ENABLE_DESKTOP \ #define ps_trivial_usage \ "[-o COL1,COL2=HEADER]" IF_FEATURE_SHOW_THREADS(" [-T]") \ #define ps_full_usage "\n\n" \ "Show list of processes\n" \ "\n -o COL1,COL2=HEADER Select columns for display" \ IF_FEATURE_SHOW_THREADS( \ "\n -T Show threads" \ ) \ #else /* !ENABLE_DESKTOP */ \ #if !ENABLE_SELINUX && !ENABLE_FEATURE_PS_WIDE \ #define USAGE_PS "\nThis version of ps accepts no options" \ #else \ #define USAGE_PS "" \ #endif \ #define ps_trivial_usage \ "" \ #define ps_full_usage "\n\n" \ "Show list of processes\n" \ USAGE_PS \ IF_SELINUX( \ "\n -Z Show selinux context" \ ) \ IF_FEATURE_PS_WIDE( \ "\n w Wide output" \ ) \ IF_FEATURE_PS_LONG( \ "\n l Long output" \ ) \ IF_FEATURE_SHOW_THREADS( \ "\n T Show threads" \ ) \ #endif /* ENABLE_DESKTOP */ \ #define ps_example_usage \ "$ ps\n" \ " PID Uid Gid State Command\n" \ " 1 root root S init\n" \ " 2 root root S [kflushd]\n" \ " 3 root root S [kupdate]\n" \ " 4 root root S [kpiod]\n" \ " 5 root root S [kswapd]\n" \ " 742 andersen andersen S [bash]\n" \ " 743 andersen andersen S -bash\n" \ " 745 root root S [getty]\n" \ " 2990 andersen andersen R ps\n" \ #define renice_trivial_usage \ "{{-n INCREMENT} | PRIORITY} [[-p | -g | -u] ID...]" \ #define renice_full_usage "\n\n" \ "Change scheduling priority for a running process\n" \ "\n -n Adjust current nice value (smaller is faster)" \ "\n -p Process id(s) (default)" \ "\n -g Process group id(s)" \ "\n -u Process user name(s) and/or id(s)" \ #define smemcap_trivial_usage ">SMEMDATA.TAR" \ #define smemcap_full_usage "\n\n" \ "Collect memory usage data in /proc and write it to stdout" \ #define sysctl_trivial_usage \ "[OPTIONS] [KEY[=VALUE]]..." \ #define sysctl_full_usage "\n\n" \ "Show/set kernel parameters\n" \ "\n -e Don't warn about unknown keys" \ "\n -n Don't show key names" \ "\n -a Show all values" \ "\n -w Set values" \ "\n -p FILE Set values from FILE (default /etc/sysctl.conf)" \ "\n -q Set values silently" \ #define sysctl_example_usage \ "sysctl [-n] [-e] variable...\n" \ "sysctl [-n] [-e] [-q] -w variable=value...\n" \ "sysctl [-n] [-e] -a\n" \ "sysctl [-n] [-e] [-q] -p file (default /etc/sysctl.conf)\n" \ "sysctl [-n] [-e] -A\n" \ #if ENABLE_FEATURE_SHOW_THREADS || ENABLE_FEATURE_TOP_SMP_CPU \ # define IF_SHOW_THREADS_OR_TOP_SMP(...) __VA_ARGS__ \ #else \ # define IF_SHOW_THREADS_OR_TOP_SMP(...) \ #endif \ #define top_trivial_usage \ "[-b] [-nCOUNT] [-dSECONDS]" IF_FEATURE_TOPMEM(" [-m]") \ #define top_full_usage "\n\n" \ "Provide a view of process activity in real time." \ "\n""Read the status of all processes from /proc each SECONDS" \ "\n""and display a screenful of them." \ "\n""Keys:" \ "\n"" N/M" \ IF_FEATURE_TOP_CPU_USAGE_PERCENTAGE("/P") \ IF_FEATURE_TOP_CPU_USAGE_PERCENTAGE("/T") \ ": " IF_FEATURE_TOPMEM("show CPU usage, ") "sort by pid/mem" \ IF_FEATURE_TOP_CPU_USAGE_PERCENTAGE("/cpu") \ IF_FEATURE_TOP_CPU_USAGE_PERCENTAGE("/time") \ IF_FEATURE_TOPMEM( \ "\n"" S: show memory" \ ) \ "\n"" R: reverse sort" \ IF_SHOW_THREADS_OR_TOP_SMP( \ "\n"" " \ IF_FEATURE_SHOW_THREADS("H: toggle threads") \ IF_FEATURE_SHOW_THREADS(IF_FEATURE_TOP_SMP_CPU(", ")) \ IF_FEATURE_TOP_SMP_CPU("1: toggle SMP") \ ) \ "\n"" Q,^C: exit" \ "\n" \ "\n""Options:" \ "\n"" -b Batch mode" \ "\n"" -n N Exit after N iterations" \ "\n"" -d N Delay between updates" \ IF_FEATURE_TOPMEM( \ "\n"" -m Same as 's' key" \ ) \ #define uptime_trivial_usage \ "" \ #define uptime_full_usage "\n\n" \ "Display the time since the last boot" \ #define uptime_example_usage \ "$ uptime\n" \ " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n" \ #define watch_trivial_usage \ "[-n SEC] [-t] PROG ARGS" \ #define watch_full_usage "\n\n" \ "Run PROG periodically\n" \ "\n -n Loop period in seconds (default 2)" \ "\n -t Don't print header" \ #define watch_example_usage \ "$ watch date\n" \ "Mon Dec 17 10:31:40 GMT 2000\n" \ "Mon Dec 17 10:31:42 GMT 2000\n" \ "Mon Dec 17 10:31:44 GMT 2000" \ #define chpst_trivial_usage \ "[-vP012] [-u USER[:GRP]] [-U USER[:GRP]] [-e DIR]\n" \ " [-/ DIR] [-n NICE] [-m BYTES] [-d BYTES] [-o N]\n" \ " [-p N] [-f BYTES] [-c BYTES] PROG ARGS" \ #define chpst_full_usage "\n\n" \ "Change the process state, run PROG\n" \ "\n -u USER[:GRP] Set uid and gid" \ "\n -U USER[:GRP] Set $UID and $GID in environment" \ "\n -e DIR Set environment variables as specified by files" \ "\n in DIR: file=1st_line_of_file" \ "\n -/ DIR Chroot to DIR" \ "\n -n NICE Add NICE to nice value" \ "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES" \ "\n -d BYTES Limit data segment" \ "\n -o N Limit number of open files per process" \ "\n -p N Limit number of processes per uid" \ "\n -f BYTES Limit output file sizes" \ "\n -c BYTES Limit core file size" \ "\n -v Verbose" \ "\n -P Create new process group" \ "\n -0 Close stdin" \ "\n -1 Close stdout" \ "\n -2 Close stderr" \ #define envdir_trivial_usage \ "DIR PROG ARGS" \ #define envdir_full_usage "\n\n" \ "Set various environment variables as specified by files\n" \ "in the directory DIR, run PROG" \ #define envuidgid_trivial_usage \ "USER PROG ARGS" \ #define envuidgid_full_usage "\n\n" \ "Set $UID to USER's uid and $GID to USER's gid, run PROG" \ #define setuidgid_trivial_usage \ "USER PROG ARGS" \ #define setuidgid_full_usage "\n\n" \ "Set uid and gid to USER's uid and gid, drop supplementary group ids,\n" \ "run PROG" \ #define softlimit_trivial_usage \ "[-a BYTES] [-m BYTES] [-d BYTES] [-s BYTES] [-l BYTES]\n" \ " [-f BYTES] [-c BYTES] [-r BYTES] [-o N] [-p N] [-t N]\n" \ " PROG ARGS" \ #define softlimit_full_usage "\n\n" \ "Set soft resource limits, then run PROG\n" \ "\n -a BYTES Limit total size of all segments" \ "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES -a BYTES" \ "\n -d BYTES Limit data segment" \ "\n -s BYTES Limit stack segment" \ "\n -l BYTES Limit locked memory size" \ "\n -o N Limit number of open files per process" \ "\n -p N Limit number of processes per uid" \ "\nOptions controlling file sizes:" \ "\n -f BYTES Limit output file sizes" \ "\n -c BYTES Limit core file size" \ "\nEfficiency opts:" \ "\n -r BYTES Limit resident set size" \ "\n -t N Limit CPU time, process receives" \ "\n a SIGXCPU after N seconds" \ #define runsv_trivial_usage \ "DIR" \ #define runsv_full_usage "\n\n" \ "Start and monitor a service and optionally an appendant log service" \ #define runsvdir_trivial_usage \ "[-P] [-s SCRIPT] DIR" \ #define runsvdir_full_usage "\n\n" \ "Start a runsv process for each subdirectory. If it exits, restart it.\n" \ "\n -P Put each runsv in a new session" \ "\n -s SCRIPT Run SCRIPT after signal is processed" \ #define sv_trivial_usage \ "[-v] [-w SEC] CMD SERVICE_DIR..." \ #define sv_full_usage "\n\n" \ "Control services monitored by runsv supervisor.\n" \ "Commands (only first character is enough):\n" \ "\n" \ "status: query service status\n" \ "up: if service isn't running, start it. If service stops, restart it\n" \ "once: like 'up', but if service stops, don't restart it\n" \ "down: send TERM and CONT signals. If ./run exits, start ./finish\n" \ " if it exists. After it stops, don't restart service\n" \ "exit: send TERM and CONT signals to service and log service. If they exit,\n" \ " runsv exits too\n" \ "pause, cont, hup, alarm, interrupt, quit, 1, 2, term, kill: send\n" \ "STOP, CONT, HUP, ALRM, INT, QUIT, USR1, USR2, TERM, KILL signal to service" \ #define svlogd_trivial_usage \ "[-ttv] [-r C] [-R CHARS] [-l MATCHLEN] [-b BUFLEN] DIR..." \ #define svlogd_full_usage "\n\n" \ "Continuously read log data from stdin and write to rotated log files in DIRs" \ "\n" \ "\n""DIR/config file modifies behavior:" \ "\n""sSIZE - when to rotate logs" \ "\n""nNUM - number of files to retain" \ "\n""!PROG - process rotated log with PROG" \ "\n""+,-PATTERN - (de)select line for logging" \ "\n""E,ePATTERN - (de)select line for stderr" \ #define chcon_trivial_usage \ "[OPTIONS] CONTEXT FILE..." \ "\n chcon [OPTIONS] [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE..." \ IF_FEATURE_CHCON_LONG_OPTIONS( \ "\n chcon [OPTIONS] --reference=RFILE FILE..." \ ) \ #define chcon_full_usage "\n\n" \ "Change the security context of each FILE to CONTEXT\n" \ IF_FEATURE_CHCON_LONG_OPTIONS( \ "\n -v,--verbose Verbose" \ "\n -c,--changes Report changes made" \ "\n -h,--no-dereference Affect symlinks instead of their targets" \ "\n -f,--silent,--quiet Suppress most error messages" \ "\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \ "\n -u,--user=USER Set user/role/type/range in the target" \ "\n -r,--role=ROLE security context" \ "\n -t,--type=TYPE" \ "\n -l,--range=RANGE" \ "\n -R,--recursive Recurse" \ ) \ IF_NOT_FEATURE_CHCON_LONG_OPTIONS( \ "\n -v Verbose" \ "\n -c Report changes made" \ "\n -h Affect symlinks instead of their targets" \ "\n -f Suppress most error messages" \ "\n -u USER Set user/role/type/range in the target security context" \ "\n -r ROLE" \ "\n -t TYPE" \ "\n -l RNG" \ "\n -R Recurse" \ ) \ #define getenforce_trivial_usage NOUSAGE_STR \ #define getenforce_full_usage "" \ #define getsebool_trivial_usage \ "-a or getsebool boolean..." \ #define getsebool_full_usage "\n\n" \ " -a Show all selinux booleans" \ #define load_policy_trivial_usage NOUSAGE_STR \ #define load_policy_full_usage "" \ #define matchpathcon_trivial_usage \ "[-n] [-N] [-f file_contexts_file] [-p prefix] [-V]" \ #define matchpathcon_full_usage "\n\n" \ " -n Don't display path" \ "\n -N Don't use translations" \ "\n -f Use alternate file_context file" \ "\n -p Use prefix to speed translations" \ "\n -V Verify file context on disk matches defaults" \ #define runcon_trivial_usage \ "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] PROG ARGS\n" \ "runcon CONTEXT PROG ARGS" \ #define runcon_full_usage "\n\n" \ "Run PROG in a different security context\n" \ "\n CONTEXT Complete security context\n" \ IF_FEATURE_RUNCON_LONG_OPTIONS( \ "\n -c,--compute Compute process transition context before modifying" \ "\n -t,--type=TYPE Type (for same role as parent)" \ "\n -u,--user=USER User identity" \ "\n -r,--role=ROLE Role" \ "\n -l,--range=RNG Levelrange" \ ) \ IF_NOT_FEATURE_RUNCON_LONG_OPTIONS( \ "\n -c Compute process transition context before modifying" \ "\n -t TYPE Type (for same role as parent)" \ "\n -u USER User identity" \ "\n -r ROLE Role" \ "\n -l RNG Levelrange" \ ) \ #define selinuxenabled_trivial_usage NOUSAGE_STR \ #define selinuxenabled_full_usage "" \ #define sestatus_trivial_usage \ "[-vb]" \ #define sestatus_full_usage "\n\n" \ " -v Verbose" \ "\n -b Display current state of booleans" \ #define setenforce_trivial_usage \ "[Enforcing | Permissive | 1 | 0]" \ #define setenforce_full_usage "" \ #define setfiles_trivial_usage \ "[-dnpqsvW] [-e DIR]... [-o FILE] [-r alt_root_path]" \ IF_FEATURE_SETFILES_CHECK_OPTION( \ " [-c policyfile] spec_file" \ ) \ " pathname" \ #define setfiles_full_usage "\n\n" \ "Reset file contexts under pathname according to spec_file\n" \ IF_FEATURE_SETFILES_CHECK_OPTION( \ "\n -c FILE Check the validity of the contexts against the specified binary policy" \ ) \ "\n -d Show which specification matched each file" \ "\n -l Log changes in file labels to syslog" \ "\n -n Don't change any file labels" \ "\n -q Suppress warnings" \ "\n -r DIR Use an alternate root path" \ "\n -e DIR Exclude DIR" \ "\n -F Force reset of context to match file_context for customizable files" \ "\n -o FILE Save list of files with incorrect context" \ "\n -s Take a list of files from stdin (instead of command line)" \ "\n -v Show changes in file labels, if type or role are changing" \ "\n -vv Show changes in file labels, if type, role, or user are changing" \ "\n -W Display warnings about entries that had no matching files" \ #define restorecon_trivial_usage \ "[-iFnRv] [-e EXCLUDEDIR]... [-o FILE] [-f FILE]" \ #define restorecon_full_usage "\n\n" \ "Reset security contexts of files in pathname\n" \ "\n -i Ignore files that don't exist" \ "\n -f FILE File with list of files to process" \ "\n -e DIR Directory to exclude" \ "\n -R,-r Recurse" \ "\n -n Don't change any file labels" \ "\n -o FILE Save list of files with incorrect context" \ "\n -v Verbose" \ "\n -vv Show changed labels" \ "\n -F Force reset of context to match file_context" \ "\n for customizable files, or the user section," \ "\n if it has changed" \ #define setsebool_trivial_usage \ "boolean value" \ #define setsebool_full_usage "\n\n" \ "Change boolean setting" \ #define ash_trivial_usage \ "[-/+OPTIONS] [-/+o OPT]... [-c 'SCRIPT' [ARG0 [ARGS]] / FILE [ARGS]]" \ #define ash_full_usage "\n\n" \ "Unix shell interpreter" \ #if ENABLE_FEATURE_SH_IS_ASH \ # define sh_trivial_usage ash_trivial_usage \ # define sh_full_usage ash_full_usage \ #endif \ #if ENABLE_FEATURE_BASH_IS_ASH \ # define bash_trivial_usage ash_trivial_usage \ # define bash_full_usage ash_full_usage \ #endif \ #define cttyhack_trivial_usage \ "[PROG ARGS]" \ #define cttyhack_full_usage "\n\n" \ "Give PROG a controlling tty if possible." \ "\nExample for /etc/inittab (for busybox init):" \ "\n ::respawn:/bin/cttyhack /bin/sh" \ "\nGiving controlling tty to shell running with PID 1:" \ "\n $ exec cttyhack sh" \ "\nStarting interactive shell from boot shell script:" \ "\n setsid cttyhack sh" \ #define hush_trivial_usage \ "[-nxl] [-c 'SCRIPT' [ARG0 [ARGS]] / FILE [ARGS]]" \ #define hush_full_usage "\n\n" \ "Unix shell interpreter" \ #define msh_trivial_usage hush_trivial_usage \ #define msh_full_usage hush_full_usage \ #if ENABLE_FEATURE_SH_IS_HUSH \ # define sh_trivial_usage hush_trivial_usage \ # define sh_full_usage hush_full_usage \ #endif \ #if ENABLE_FEATURE_BASH_IS_HUSH \ # define bash_trivial_usage hush_trivial_usage \ # define bash_full_usage hush_full_usage \ #endif \ #define klogd_trivial_usage \ "[-c N] [-n]" \ #define klogd_full_usage "\n\n" \ "Kernel logger\n" \ "\n -c N Print to console messages more urgent than prio N (1-8)" \ "\n -n Run in foreground" \ #define logger_trivial_usage \ "[OPTIONS] [MESSAGE]" \ #define logger_full_usage "\n\n" \ "Write MESSAGE (or stdin) to syslog\n" \ "\n -s Log to stderr as well as the system log" \ "\n -t TAG Log using the specified tag (defaults to user name)" \ "\n -p PRIO Priority (numeric or facility.level pair)" \ #define logger_example_usage \ "$ logger \"hello\"\n" \ #define logread_trivial_usage \ "[-f]" \ #define logread_full_usage "\n\n" \ "Show messages in syslogd's circular buffer\n" \ "\n -f Output data as log grows" \ #define syslogd_trivial_usage \ "[OPTIONS]" \ #define syslogd_full_usage "\n\n" \ "System logging utility\n" \ IF_NOT_FEATURE_SYSLOGD_CFG( \ "(this version of syslogd ignores /etc/syslog.conf)\n" \ ) \ "\n -n Run in foreground" \ "\n -O FILE Log to FILE (default:/var/log/messages)" \ "\n -l N Log only messages more urgent than prio N (1-8)" \ "\n -S Smaller output" \ IF_FEATURE_ROTATE_LOGFILE( \ "\n -s SIZE Max size (KB) before rotation (default:200KB, 0=off)" \ "\n -b N N rotated logs to keep (default:1, max=99, 0=purge)" \ ) \ IF_FEATURE_REMOTE_LOG( \ "\n -R HOST[:PORT] Log to IP or hostname on PORT (default PORT=514/UDP)" \ "\n -L Log locally and via network (default is network only if -R)" \ ) \ IF_FEATURE_SYSLOGD_DUP( \ "\n -D Drop duplicates" \ ) \ IF_FEATURE_IPC_SYSLOG( \ "\n -C[size_kb] Log to shared mem buffer (use logread to read it)" \ ) \ IF_FEATURE_SYSLOGD_CFG( \ "\n -f FILE Use FILE as config (default:/etc/syslog.conf)" \ ) \ IF_FEATURE_KMSG_SYSLOG( \ "\n -K Log to kernel printk buffer (use dmesg to read it)" \ ) \ #define syslogd_example_usage \ "$ syslogd -R masterlog:514\n" \ "$ syslogd -R 192.168.1.1:601\n" \ #define acpid_trivial_usage \ "[-df] [-c CONFDIR] [-l LOGFILE] [-a ACTIONFILE] [-M MAPFILE] [-e PROC_EVENT_FILE] [-p PIDFILE]" \ #define acpid_full_usage "\n\n" \ "Listen to ACPI events and spawn specific helpers on event arrival\n" \ "\n -d Log to stderr, not log file (implies -f)" \ "\n -f Run in foreground" \ "\n -c DIR Config directory [/etc/acpi]" \ "\n -e FILE /proc event file [/proc/acpi/event]" \ "\n -l FILE Log file [/var/log/acpid.log]" \ "\n -p FILE Pid file [/var/run/acpid.pid]" \ "\n -a FILE Action file [/etc/acpid.conf]" \ "\n -M FILE Map file [/etc/acpi.map]" \ IF_FEATURE_ACPID_COMPAT( \ "\n\nAccept and ignore compatibility options -g -m -s -S -v" \ ) \ #define acpid_example_usage \ "Without -e option, acpid uses all /dev/input/event* files\n" \ "# acpid\n" \ "# acpid -l /var/log/my-acpi-log\n" \ "# acpid -e /proc/acpi/event\n" \ #define blkid_trivial_usage \ "[BLOCKDEV]..." \ #define blkid_full_usage "\n\n" \ "Print UUIDs of all filesystems" \ #define blockdev_trivial_usage \ "OPTION BLOCKDEV" \ #define blockdev_full_usage "\n\n" \ " --setro Set ro" \ "\n --setrw Set rw" \ "\n --getro Get ro" \ "\n --getss Get sector size" \ "\n --getbsz Get block size" \ "\n --setbsz BYTES Set block size" \ "\n --getsz Get device size in 512-byte sectors" \ "\n --getsize64 Get device size in bytes" \ "\n --flushbufs Flush buffers" \ "\n --rereadpt Reread partition table" \ #define dmesg_trivial_usage \ "[-c] [-n LEVEL] [-s SIZE]" \ #define dmesg_full_usage "\n\n" \ "Print or control the kernel ring buffer\n" \ "\n -c Clear ring buffer after printing" \ "\n -n LEVEL Set console logging level" \ "\n -s SIZE Buffer size" \ #define fbset_trivial_usage \ "[OPTIONS] [MODE]" \ #define fbset_full_usage "\n\n" \ "Show and modify frame buffer settings" \ #define fbset_example_usage \ "$ fbset\n" \ "mode \"1024x768-76\"\n" \ " # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \ " geometry 1024 768 1024 768 16\n" \ " timings 12714 128 32 16 4 128 4\n" \ " accel false\n" \ " rgba 5/11,6/5,5/0,0/0\n" \ "endmode\n" \ #define fdformat_trivial_usage \ "[-n] DEVICE" \ #define fdformat_full_usage "\n\n" \ "Format floppy disk\n" \ "\n -n Don't verify after format" \ #ifndef ENABLE_FEATURE_FDISK_BLKSIZE \ # define ENABLE_FEATURE_FDISK_BLKSIZE 0 \ # define IF_FEATURE_FDISK_BLKSIZE(a) \ #endif \ #define fdisk_trivial_usage \ "[-ul" IF_FEATURE_FDISK_BLKSIZE("s") "] " \ "[-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK" \ #define fdisk_full_usage "\n\n" \ "Change partition table\n" \ "\n -u Start and End are in sectors (instead of cylinders)" \ "\n -l Show partition table for each DISK, then exit" \ IF_FEATURE_FDISK_BLKSIZE( \ "\n -s Show partition sizes in kb for each DISK, then exit" \ ) \ "\n -b 2048 (for certain MO disks) use 2048-byte sectors" \ "\n -C CYLINDERS Set number of cylinders/heads/sectors" \ "\n -H HEADS" \ "\n -S SECTORS" \ #define findfs_trivial_usage \ "LABEL=label or UUID=uuid" \ #define findfs_full_usage "\n\n" \ "Find a filesystem device based on a label or UUID" \ #define findfs_example_usage \ "$ findfs LABEL=MyDevice" \ #define flock_trivial_usage \ "[-sxun] FD|{FILE [-c] PROG ARGS}" \ #define flock_full_usage "\n\n" \ "[Un]lock file descriptor, or lock FILE, run PROG\n" \ "\n -s Shared lock" \ "\n -x Exclusive lock (default)" \ "\n -u Unlock FD" \ "\n -n Fail rather than wait" \ #define freeramdisk_trivial_usage \ "DEVICE" \ #define freeramdisk_full_usage "\n\n" \ "Free all memory used by the specified ramdisk" \ #define freeramdisk_example_usage \ "$ freeramdisk /dev/ram2\n" \ #define fdflush_trivial_usage \ "DEVICE" \ #define fdflush_full_usage "\n\n" \ "Force floppy disk drive to detect disk change" \ #define fsck_minix_trivial_usage \ "[-larvsmf] BLOCKDEV" \ #define fsck_minix_full_usage "\n\n" \ "Check MINIX filesystem\n" \ "\n -l List all filenames" \ "\n -r Perform interactive repairs" \ "\n -a Perform automatic repairs" \ "\n -v Verbose" \ "\n -s Output superblock information" \ "\n -m Show \"mode not cleared\" warnings" \ "\n -f Force file system check" \ #define getopt_trivial_usage \ "[OPTIONS] [--] OPTSTRING PARAMS" \ #define getopt_full_usage "\n\n" \ IF_LONG_OPTS( \ " -a,--alternative Allow long options starting with single -" \ "\n -l,--longoptions=LOPT[,...] Long options to be recognized" \ "\n -n,--name=PROGNAME The name under which errors are reported" \ "\n -o,--options=OPTSTRING Short options to be recognized" \ "\n -q,--quiet Disable error reporting by getopt(3)" \ "\n -Q,--quiet-output No normal output" \ "\n -s,--shell=SHELL Set shell quoting conventions" \ "\n -T,--test Test for getopt(1) version" \ "\n -u,--unquoted Don't quote the output" \ ) \ IF_NOT_LONG_OPTS( \ " -a Allow long options starting with single -" \ "\n -l LOPT[,...] Long options to be recognized" \ "\n -n PROGNAME The name under which errors are reported" \ "\n -o OPTSTRING Short options to be recognized" \ "\n -q Disable error reporting by getopt(3)" \ "\n -Q No normal output" \ "\n -s SHELL Set shell quoting conventions" \ "\n -T Test for getopt(1) version" \ "\n -u Don't quote the output" \ ) \ "\n" \ "\nExample:" \ "\n" \ "\nO=`getopt -l bb: -- ab:c:: \"$@\"` || exit 1" \ "\neval set -- \"$O\"" \ "\nwhile true; do" \ "\n case \"$1\" in" \ "\n -a) echo A; shift;;" \ "\n -b|--bb) echo \"B:'$2'\"; shift 2;;" \ "\n -c) case \"$2\" in" \ "\n \"\") echo C; shift 2;;" \ "\n *) echo \"C:'$2'\"; shift 2;;" \ "\n esac;;" \ "\n --) shift; break;;" \ "\n *) echo Error; exit 1;;" \ "\n esac" \ "\ndone" \ #define getopt_example_usage \ "$ cat getopt.test\n" \ "#!/bin/sh\n" \ "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \ " -n 'example.busybox' -- \"$@\"`\n" \ "if [ $? != 0 ]; then exit 1; fi\n" \ "eval set -- \"$GETOPT\"\n" \ "while true; do\n" \ " case $1 in\n" \ " -a|--a-long) echo \"Option a\"; shift;;\n" \ " -b|--b-long) echo \"Option b, argument '$2'\"; shift 2;;\n" \ " -c|--c-long)\n" \ " case \"$2\" in\n" \ " \"\") echo \"Option c, no argument\"; shift 2;;\n" \ " *) echo \"Option c, argument '$2'\"; shift 2;;\n" \ " esac;;\n" \ " --) shift; break;;\n" \ " *) echo \"Internal error!\"; exit 1;;\n" \ " esac\n" \ "done\n" \ #define hexdump_trivial_usage \ "[-bcCdefnosvx" IF_FEATURE_HEXDUMP_REVERSE("R") "] [FILE]..." \ #define hexdump_full_usage "\n\n" \ "Display FILEs (or stdin) in a user specified format\n" \ "\n -b One-byte octal display" \ "\n -c One-byte character display" \ "\n -C Canonical hex+ASCII, 16 bytes per line" \ "\n -d Two-byte decimal display" \ "\n -e FORMAT_STRING" \ "\n -f FORMAT_FILE" \ "\n -n LENGTH Interpret only LENGTH bytes of input" \ "\n -o Two-byte octal display" \ "\n -s OFFSET Skip OFFSET bytes" \ "\n -v Display all input data" \ "\n -x Two-byte hexadecimal display" \ IF_FEATURE_HEXDUMP_REVERSE( \ "\n -R Reverse of 'hexdump -Cv'") \ #define hd_trivial_usage \ "FILE..." \ #define hd_full_usage "\n\n" \ "hd is an alias for hexdump -C" \ #define hwclock_trivial_usage \ IF_FEATURE_HWCLOCK_LONG_OPTIONS( \ "[-r|--show] [-s|--hctosys] [-w|--systohc] [-t|--systz]" \ " [-l|--localtime] [-u|--utc]" \ " [-f|--rtc FILE]" \ ) \ IF_NOT_FEATURE_HWCLOCK_LONG_OPTIONS( \ "[-r] [-s] [-w] [-t] [-l] [-u] [-f FILE]" \ ) \ #define hwclock_full_usage "\n\n" \ "Query and set hardware clock (RTC)\n" \ "\n -r Show hardware clock time" \ "\n -s Set system time from hardware clock" \ "\n -w Set hardware clock from system time" \ "\n -t Set in-kernel timezone, correct system time" \ "\n if hardware clock is in local time" \ "\n -u Assume hardware clock is kept in UTC" \ "\n -l Assume hardware clock is kept in local time" \ "\n -f FILE Use specified device (e.g. /dev/rtc2)" \ #define ipcrm_trivial_usage \ "[-MQS key] [-mqs id]" \ #define ipcrm_full_usage "\n\n" \ "Upper-case options MQS remove an object by shmkey value.\n" \ "Lower-case options remove an object by shmid value.\n" \ "\n -mM Remove memory segment after last detach" \ "\n -qQ Remove message queue" \ "\n -sS Remove semaphore" \ #define ipcs_trivial_usage \ "[[-smq] -i shmid] | [[-asmq] [-tcplu]]" \ #define ipcs_full_usage "\n\n" \ " -i Show specific resource" \ "\nResource specification:" \ "\n -m Shared memory segments" \ "\n -q Message queues" \ "\n -s Semaphore arrays" \ "\n -a All (default)" \ "\nOutput format:" \ "\n -t Time" \ "\n -c Creator" \ "\n -p Pid" \ "\n -l Limits" \ "\n -u Summary" \ #define losetup_trivial_usage \ "[-r] [-o OFS] LOOPDEV FILE - associate loop devices\n" \ " losetup -d LOOPDEV - disassociate\n" \ " losetup [-f] - show" \ #define losetup_full_usage "\n\n" \ " -o OFS Start OFS bytes into FILE" \ "\n -r Read-only" \ "\n -f Show first free loop device" \ #define losetup_notes_usage \ "No arguments will display all current associations.\n" \ "One argument (losetup /dev/loop1) will display the current association\n" \ "(if any), or disassociate it (with -d). The display shows the offset\n" \ "and filename of the file the loop device is currently bound to.\n\n" \ "Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \ "with an optional offset (-o 12345). Encryption is not yet supported.\n" \ "losetup -f will show the first loop free loop device\n\n" \ #define lspci_trivial_usage \ "[-mk]" \ #define lspci_full_usage "\n\n" \ "List all PCI devices" \ "\n" \ "\n -m Parsable output" \ "\n -k Show driver" \ #define lsusb_trivial_usage NOUSAGE_STR \ #define lsusb_full_usage "" \ #define mdev_trivial_usage \ "[-s]" \ #define mdev_full_usage "\n\n" \ "mdev -s is to be run during boot to scan /sys and populate /dev.\n" \ "\n" \ "Bare mdev is a kernel hotplug helper. To activate it:\n" \ " echo /sbin/mdev >/proc/sys/kernel/hotplug\n" \ IF_FEATURE_MDEV_CONF( \ "\n" \ "It uses /etc/mdev.conf with lines\n" \ " [-][ENV=regex;]...DEVNAME UID:GID PERM" \ IF_FEATURE_MDEV_RENAME(" [>|=PATH]|[!]") \ IF_FEATURE_MDEV_EXEC(" [@|$|*PROG]") \ "\n" \ "where DEVNAME is device name regex, @major,minor[-minor2], or\n" \ "environment variable regex. A common use of the latter is\n" \ "to load modules for hotplugged devices:\n" \ " $MODALIAS=.* 0:0 660 @modprobe \"$MODALIAS\"\n" \ ) \ "\n" \ "If /dev/mdev.seq file exists, mdev will wait for its value\n" \ "to match $SEQNUM variable. This prevents plug/unplug races.\n" \ "To activate this feature, create empty /dev/mdev.seq at boot.\n" \ "\n" \ "If /dev/mdev.log file exists, debug log will be appended to it." \ #define mkfs_ext2_trivial_usage \ "[-Fn] " \ "[-b BLK_SIZE] " \ "[-i INODE_RATIO] [-I INODE_SIZE] " \ "[-m RESERVED_PERCENT] " \ "[-L LABEL] " \ "BLOCKDEV [KBYTES]" \ #define mkfs_ext2_full_usage "\n\n" \ " -b BLK_SIZE Block size, bytes" \ "\n -F Force" \ "\n -i RATIO Max number of files is filesystem_size / RATIO" \ "\n -I BYTES Inode size (min 128)" \ "\n -L LBL Volume label" \ "\n -m PERCENT Percent of blocks to reserve for admin" \ "\n -n Dry run" \ #define mkfs_minix_trivial_usage \ "[-c | -l FILE] [-nXX] [-iXX] BLOCKDEV [KBYTES]" \ #define mkfs_minix_full_usage "\n\n" \ "Make a MINIX filesystem\n" \ "\n -c Check device for bad blocks" \ "\n -n [14|30] Maximum length of filenames" \ "\n -i INODES Number of inodes for the filesystem" \ "\n -l FILE Read bad blocks list from FILE" \ "\n -v Make version 2 filesystem" \ #define mkfs_reiser_trivial_usage \ "[-f] [-l LABEL] BLOCKDEV [4K-BLOCKS]" \ #define mkfs_reiser_full_usage "\n\n" \ "Make a ReiserFS V3 filesystem\n" \ "\n -f Force" \ "\n -l LBL Volume label" \ #define mkfs_vfat_trivial_usage \ "[-v] [-n LABEL] BLOCKDEV [KBYTES]" \ #define mkfs_vfat_full_usage "\n\n" \ "Make a FAT32 filesystem\n" \ "\n -v Verbose" \ "\n -n LBL Volume label" \ #define mkswap_trivial_usage \ "[-L LBL] BLOCKDEV [KBYTES]" \ #define mkswap_full_usage "\n\n" \ "Prepare BLOCKDEV to be used as swap partition\n" \ "\n -L LBL Label" \ #define more_trivial_usage \ "[FILE]..." \ #define more_full_usage "\n\n" \ "View FILE (or stdin) one screenful at a time" \ #define more_example_usage \ "$ dmesg | more\n" \ #define mount_trivial_usage \ "[OPTIONS] [-o OPTS] DEVICE NODE" \ #define mount_full_usage "\n\n" \ "Mount a filesystem. Filesystem autodetection requires /proc.\n" \ "\n -a Mount all filesystems in fstab" \ IF_FEATURE_MOUNT_FAKE( \ IF_FEATURE_MTAB_SUPPORT( \ "\n -f Update /etc/mtab, but don't mount" \ ) \ IF_NOT_FEATURE_MTAB_SUPPORT( \ "\n -f Dry run" \ ) \ ) \ IF_FEATURE_MOUNT_HELPERS( \ "\n -i Don't run mount helper" \ ) \ IF_FEATURE_MTAB_SUPPORT( \ "\n -n Don't update /etc/mtab" \ ) \ IF_FEATURE_MOUNT_VERBOSE( \ "\n -v Verbose" \ ) \ "\n -r Read-only mount" \ "\n -w Read-write mount (default)" \ "\n -t FSTYPE[,...] Filesystem type(s)" \ "\n -O OPT Mount only filesystems with option OPT (-a only)" \ "\n-o OPT:" \ IF_FEATURE_MOUNT_LOOP( \ "\n loop Ignored (loop devices are autodetected)" \ ) \ IF_FEATURE_MOUNT_FLAGS( \ "\n [a]sync Writes are [a]synchronous" \ "\n [no]atime Disable/enable updates to inode access times" \ "\n [no]diratime Disable/enable atime updates to directories" \ "\n [no]relatime Disable/enable atime updates relative to modification time" \ "\n [no]dev (Dis)allow use of special device files" \ "\n [no]exec (Dis)allow use of executable files" \ "\n [no]suid (Dis)allow set-user-id-root programs" \ "\n [r]shared Convert [recursively] to a shared subtree" \ "\n [r]slave Convert [recursively] to a slave subtree" \ "\n [r]private Convert [recursively] to a private subtree" \ "\n [un]bindable Make mount point [un]able to be bind mounted" \ "\n [r]bind Bind a file or directory [recursively] to another location" \ "\n move Relocate an existing mount point" \ ) \ "\n remount Remount a mounted filesystem, changing flags" \ "\n ro/rw Same as -r/-w" \ "\n" \ "\nThere are filesystem-specific -o flags." \ #define mount_example_usage \ "$ mount\n" \ "/dev/hda3 on / type minix (rw)\n" \ "proc on /proc type proc (rw)\n" \ "devpts on /dev/pts type devpts (rw)\n" \ "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \ "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \ "$ mount cd_image.iso mydir\n" \ #define mount_notes_usage \ "Returns 0 for success, number of failed mounts for -a, or errno for one mount." \ #define pivot_root_trivial_usage \ "NEW_ROOT PUT_OLD" \ #define pivot_root_full_usage "\n\n" \ "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \ "the new root file system" \ #define rdate_trivial_usage \ "[-sp] HOST" \ #define rdate_full_usage "\n\n" \ "Get and possibly set the system date/time from a remote HOST\n" \ "\n -s Set the system date/time (default)" \ "\n -p Print the date/time" \ #define rdev_trivial_usage \ "" \ #define rdev_full_usage "\n\n" \ "Print the device node associated with the filesystem mounted at '/'" \ #define rdev_example_usage \ "$ rdev\n" \ "/dev/mtdblock9 /\n" \ #define readprofile_trivial_usage \ "[OPTIONS]" \ #define readprofile_full_usage "\n\n" \ " -m mapfile (Default: /boot/System.map)" \ "\n -p profile (Default: /proc/profile)" \ "\n -M NUM Set the profiling multiplier to NUM" \ "\n -i Print only info about the sampling step" \ "\n -v Verbose" \ "\n -a Print all symbols, even if count is 0" \ "\n -b Print individual histogram-bin counts" \ "\n -s Print individual counters within functions" \ "\n -r Reset all the counters (root only)" \ "\n -n Disable byte order auto-detection" \ #define rev_trivial_usage \ "[FILE]..." \ #define rev_full_usage "\n\n" \ "Reverse lines of FILE" \ #define rtcwake_trivial_usage \ "[-a | -l | -u] [-d DEV] [-m MODE] [-s SEC | -t TIME]" \ #define rtcwake_full_usage "\n\n" \ "Enter a system sleep state until specified wakeup time\n" \ IF_LONG_OPTS( \ "\n -a,--auto Read clock mode from adjtime" \ "\n -l,--local Clock is set to local time" \ "\n -u,--utc Clock is set to UTC time" \ "\n -d,--device=DEV Specify the RTC device" \ "\n -m,--mode=MODE Set the sleep state (default: standby)" \ "\n -s,--seconds=SEC Set the timeout in SEC seconds from now" \ "\n -t,--time=TIME Set the timeout to TIME seconds from epoch" \ ) \ IF_NOT_LONG_OPTS( \ "\n -a Read clock mode from adjtime" \ "\n -l Clock is set to local time" \ "\n -u Clock is set to UTC time" \ "\n -d DEV Specify the RTC device" \ "\n -m MODE Set the sleep state (default: standby)" \ "\n -s SEC Set the timeout in SEC seconds from now" \ "\n -t TIME Set the timeout to TIME seconds from epoch" \ ) \ #define script_trivial_usage \ "[-afq" IF_SCRIPTREPLAY("t") "] [-c PROG] [OUTFILE]" \ #define script_full_usage "\n\n" \ " -a Append output" \ "\n -c PROG Run PROG, not shell" \ "\n -f Flush output after each write" \ "\n -q Quiet" \ IF_SCRIPTREPLAY( \ "\n -t Send timing to stderr" \ ) \ #define scriptreplay_trivial_usage \ "timingfile [typescript [divisor]]" \ #define scriptreplay_full_usage "\n\n" \ "Play back typescripts, using timing information" \ #define setarch_trivial_usage \ "personality PROG ARGS" \ #define setarch_full_usage "\n\n" \ "Personality may be:\n" \ " linux32 Set 32bit uname emulation\n" \ " linux64 Set 64bit uname emulation" \ #define linux32_trivial_usage NOUSAGE_STR \ #define linux32_full_usage "" \ #define linux64_trivial_usage NOUSAGE_STR \ #define linux64_full_usage "" \ #define swapon_trivial_usage \ "[-a]" IF_FEATURE_SWAPON_PRI(" [-p PRI]") " [DEVICE]" \ #define swapon_full_usage "\n\n" \ "Start swapping on DEVICE\n" \ "\n -a Start swapping on all swap devices" \ IF_FEATURE_SWAPON_PRI( \ "\n -p PRI Set swap device priority" \ ) \ #define swapoff_trivial_usage \ "[-a] [DEVICE]" \ #define swapoff_full_usage "\n\n" \ "Stop swapping on DEVICE\n" \ "\n -a Stop swapping on all swap devices" \ #define switch_root_trivial_usage \ "[-c /dev/console] NEW_ROOT NEW_INIT [ARGS]" \ #define switch_root_full_usage "\n\n" \ "Free initramfs and switch to another root fs:\n" \ "chroot to NEW_ROOT, delete all in /, move NEW_ROOT to /,\n" \ "execute NEW_INIT. PID must be 1. NEW_ROOT must be a mountpoint.\n" \ "\n -c DEV Reopen stdio to DEV after switch" \ #define umount_trivial_usage \ "[OPTIONS] FILESYSTEM|DIRECTORY" \ #define umount_full_usage "\n\n" \ "Unmount file systems\n" \ IF_FEATURE_UMOUNT_ALL( \ "\n -a Unmount all file systems" IF_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \ ) \ IF_FEATURE_MTAB_SUPPORT( \ "\n -n Don't erase /etc/mtab entries" \ ) \ "\n -r Try to remount devices as read-only if mount is busy" \ "\n -l Lazy umount (detach filesystem)" \ "\n -f Force umount (i.e., unreachable NFS server)" \ IF_FEATURE_MOUNT_LOOP( \ "\n -D Don't free loop device even if it has been used" \ ) \ #define umount_example_usage \ "$ umount /dev/hdc1\n" \ #define e2fsck_trivial_usage \ "[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \ "[-I inode_buffer_blocks] [-P process_inode_size] " \ "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \ "[-E extended-options] device" \ #define e2fsck_full_usage "\n\n" \ "Check ext2/ext3 file system\n" \ "\n -p Automatic repair (no questions)" \ "\n -n Make no changes to the filesystem" \ "\n -y Assume 'yes' to all questions" \ "\n -c Check for bad blocks and add them to the badblock list" \ "\n -f Force checking even if filesystem is marked clean" \ "\n -v Verbose" \ "\n -b superblock Use alternative superblock" \ "\n -B blocksize Force blocksize when looking for superblock" \ "\n -j journal Set location of the external journal" \ "\n -l file Add to badblocks list" \ "\n -L file Set badblocks list" \ #if defined CONFIG_UDHCP_DEBUG && CONFIG_UDHCP_DEBUG >= 1 \ # define IF_UDHCP_VERBOSE(...) __VA_ARGS__ \ #else \ # define IF_UDHCP_VERBOSE(...) \ #endif \ #define udhcpc_trivial_usage \ "[-fbnq"IF_UDHCP_VERBOSE("v")"oCRB] [-i IFACE] [-r IP] [-s PROG] [-p PIDFILE]\n" \ " [-V VENDOR] [-x OPT:VAL]... [-O OPT]..." IF_FEATURE_UDHCP_PORT(" [-P N]") \ #define udhcpc_full_usage "\n" \ IF_LONG_OPTS( \ "\n -i,--interface IFACE Interface to use (default eth0)" \ "\n -p,--pidfile FILE Create pidfile" \ "\n -s,--script PROG Run PROG at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \ "\n -B,--broadcast Request broadcast replies" \ "\n -t,--retries N Send up to N discover packets" \ "\n -T,--timeout N Pause between packets (default 3 seconds)" \ "\n -A,--tryagain N Wait N seconds after failure (default 20)" \ "\n -f,--foreground Run in foreground" \ USE_FOR_MMU( \ "\n -b,--background Background if lease is not obtained" \ ) \ "\n -n,--now Exit if lease is not obtained" \ "\n -q,--quit Exit after obtaining lease" \ "\n -R,--release Release IP on exit" \ "\n -S,--syslog Log to syslog too" \ IF_FEATURE_UDHCP_PORT( \ "\n -P,--client-port N Use port N (default 68)" \ ) \ IF_FEATURE_UDHCPC_ARPING( \ "\n -a,--arping Use arping to validate offered address" \ ) \ "\n -O,--request-option OPT Request option OPT from server (cumulative)" \ "\n -o,--no-default-options Don't request any options (unless -O is given)" \ "\n -r,--request IP Request this IP address" \ "\n -x OPT:VAL Include option OPT in sent packets (cumulative)" \ "\n Examples of string, numeric, and hex byte opts:" \ "\n -x hostname:bbox - option 12" \ "\n -x lease:3600 - option 51 (lease time)" \ "\n -x 0x3d:0100BEEFC0FFEE - option 61 (client id)" \ "\n -F,--fqdn NAME Ask server to update DNS mapping for NAME" \ "\n -V,--vendorclass VENDOR Vendor identifier (default 'udhcp VERSION')" \ "\n -C,--clientid-none Don't send MAC as client identifier" \ IF_UDHCP_VERBOSE( \ "\n -v Verbose" \ ) \ ) \ IF_NOT_LONG_OPTS( \ "\n -i IFACE Interface to use (default eth0)" \ "\n -p FILE Create pidfile" \ "\n -s PROG Run PROG at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \ "\n -B Request broadcast replies" \ "\n -t N Send up to N discover packets" \ "\n -T N Pause between packets (default 3 seconds)" \ "\n -A N Wait N seconds (default 20) after failure" \ "\n -f Run in foreground" \ USE_FOR_MMU( \ "\n -b Background if lease is not obtained" \ ) \ "\n -n Exit if lease is not obtained" \ "\n -q Exit after obtaining lease" \ "\n -R Release IP on exit" \ "\n -S Log to syslog too" \ IF_FEATURE_UDHCP_PORT( \ "\n -P N Use port N (default 68)" \ ) \ IF_FEATURE_UDHCPC_ARPING( \ "\n -a Use arping to validate offered address" \ ) \ "\n -O OPT Request option OPT from server (cumulative)" \ "\n -o Don't request any options (unless -O is given)" \ "\n -r IP Request this IP address" \ "\n -x OPT:VAL Include option OPT in sent packets (cumulative)" \ "\n Examples of string, numeric, and hex byte opts:" \ "\n -x hostname:bbox - option 12" \ "\n -x lease:3600 - option 51 (lease time)" \ "\n -x 0x3d:0100BEEFC0FFEE - option 61 (client id)" \ "\n -F NAME Ask server to update DNS mapping for NAME" \ "\n -V VENDOR Vendor identifier (default 'udhcp VERSION')" \ "\n -C Don't send MAC as client identifier" \ IF_UDHCP_VERBOSE( \ "\n -v Verbose" \ ) \ ) \ "\nSignals:" \ "\n USR1 Renew lease" \ "\n USR2 Release lease" \ #define udhcpd_trivial_usage \ "[-fS]" IF_FEATURE_UDHCP_PORT(" [-P N]") " [CONFFILE]" \ #define udhcpd_full_usage "\n\n" \ "DHCP server\n" \ "\n -f Run in foreground" \ "\n -S Log to syslog too" \ IF_FEATURE_UDHCP_PORT( \ "\n -P N Use port N (default 67)" \ ) \ #define dhcprelay_trivial_usage \ "CLIENT_IFACE[,CLIENT_IFACE2]... SERVER_IFACE [SERVER_IP]" \ #define dhcprelay_full_usage "\n\n" \ "Relay DHCP requests between clients and server" \ #define dumpleases_trivial_usage \ "[-r|-a] [-f LEASEFILE]" \ #define dumpleases_full_usage "\n\n" \ "Display DHCP leases granted by udhcpd\n" \ IF_LONG_OPTS( \ "\n -f,--file=FILE Lease file" \ "\n -r,--remaining Show remaining time" \ "\n -a,--absolute Show expiration time" \ ) \ IF_NOT_LONG_OPTS( \ "\n -f FILE Lease file" \ "\n -r Show remaining time" \ "\n -a Show expiration time" \ ) \ #define busybox_notes_usage \ "Hello world!\n" #endif