Multiple parameters are available at restore time to modify its behaviour: nuke To format and restore all files automatically interactive To restore some/all files interactively compare To compare the archives with your filesystem expert To boot to a command-line prompt (expert mode) RESTORE To format and restore all files automatically debug Call mondorestore with -K99 denymods List of modules to NOT load (using denymods="mod1 mod2") donteject mondorestore will not eject the CD Useful if your machine's case has a concealed CD-ROM drive excludedevs Exclude those devices from restoration process No LVM action done such as pvcreate, and no partitioning They are removed from /tmp/mountlist.txt and /tmp/i-want-my-lvm (using excludedevs="dev1 dev2") forcemods List of modules to load first (using forcemods="mod1 mod2") net Activate network support nodmraid Do not try to start dmraid support nodrbd Do not try to start DRBD support nohw Do not call the mindi-rsthw script to restore your HW configuration nolvm Do not try to start LVM support nomd Do not try to start mdadm support nompath Do not try to start multipath support nopart Do not try to partition drives at restore time noresize Do not resize partitions using a factor of (New size)/(Old size) to use your unallocated hard disk space obdr Call mondorestore with -o and the tape device obdrmods List of modules to remove to reset the OBDR tape device using them to place it in sequential mode. A default list is already embedded. (using obdrmods="mod1 mod2") pre Execute a pre-configuration script before calling mondorestore. Could be located on an NFS share or in the initrd. Should be executable. (using pre=/tmp/isodir/my-pre.sh) post Execute a script before rebooting the machine after the restoration Could be located on an NFS share, the restored disk or the initrd Should be executable. (using post=/tmp/isodir/my-post.sh) quiet Do not print information msgs for easier tracking of error messages serial Device for the serial console. By default /dev/ttyS0. Pass also console=ttySx for your kernel. (using serial=/dev/ttySx) Serial takes precedence over console for mindi. textonly Do not call the GUI. Unattractive but workk around if Newt has bugs usb USB device name of backup content (not partition). Help solve device renaming at restore time. (using usb=/dev/sdx) Look also at README.pxe for additional parameters linked to the PXE/Network usage