README for mondo/mindi usage with tools to backup Hardware configuration Some Hardware Manufacturers such as HP provide tools to store the Hardware configuration of their systems, such as the BIOS setup, the RAID setup, ... Mindi has a script able to store the Hardware configuration and those parameters may be restored before launching mondorestore during the boot phase computed by mindi, in order to re-setup the machine as the original one. For the moment, only HP Proliant systems are supported. If you have tools to allow support for other type of machines, feel free to contribute patches to that script. If you have a Proliant system you first need to get the Smart Start Scripting Toolkit. Due to licenses issues, mindi cannot provide those tools itself. You need to get them from http://www.hp.com/servers/sstoolkit Mindi expects to find those tools under /usr/local/bin as described in the deplist.d/proliant.conf configuration file. Here are the steps to set it up correctly: Older URL: wget ftp://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p308169895/v40154/ss-scripting-toolkit-linux-1.70.tar.gz wget ftp://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p308169895/v43548/ss-scripting-toolkit-linux-1.81.tar.gz cd /tmp wget ftp://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p308169895/v44247/ss-scripting-toolkit-linux-1.90.tar.gz mkdir ssstk cd ssstk tar xvfz ../ss-scripting-toolkit-linux-1.90.tar.gz cp -a utilities/hponcfg /usr/local/bin cp -a utilities/conrep /usr/local/bin cp -a utilities/conrep.xml /usr/local/bin cp -a utilities/cpqacuxe/cpqacuxe /usr/local/bin cp -a utilities/cpqacuxe/bld /usr/local/bin mv /usr/local/bin/bld/*.so /usr/local/lib echo /usr/local/lib >> /etc/ld.so.conf ldconfig You're now ready to check your configuration by running: mindi-bkphw /var/cache/mindi /etc/mindi [First parameter is the directory where files will be generated, Second parameter is the directory of the file proliant.files is located] For these tools to work you may have to install additional packages such as hpasm and hprsm from the HP Web site, as well as some libstdc++ compatibility packages (compat-libstdc++-33 and compat-libstdc++-296 on RHEL 5 e.g.) In order to have a working hponcfg binary you also need to install the hprsm/hpasm packages from HP Web site. Refer to http://welcome.hp.com/country/us/en/support.html?pageDisplay=drivers 2007-05-30 Initial file