#!/bin/bash

# $Id: mindi 224 2005-12-15 13:48:01Z bcornec $
#
#-----------------------------------------------------------------------------
# mindi - mini-Linux distro based on the user's filesystem & distribution
#
# Mindi can create a multi-floppy boot/root kit. The first floppy is the boot
# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
# the third disk is data disk #2; and so it goes.
#
# See http://www.mondorescue.org for details.
#-----------------------------------------------------------------------------


ADDITIONAL_BOOT_PARAMS="acpi=off apm=off devfs=nomount exec-shield=0"

RUN_AFTER_INITIAL_BOOT_PHASE="echo \"Who lives in a pineapple under the sea?\" > /tmp/spongebob.squarepants.txt"
	# after booting from floppy/CD image but before
	# accessing auxiliary data disks (or the rest of
	# the CD), the initscript will run the above command.

RUN_AFTER_BOOT_PHASE_COMPLETE="ide-opt"
	# after the emergency boot process is complete but
	# before the init script runs mondorestore, it will
	# run this command.

MINDI_REV=`echo '$Rev: 224 $' | awk '{print $2}'`

MINDI_VERSION=1.05-r$MINDI_REV
MINDI_PREFIX=XXX
MINDI_CONF=YYY
MINDI_SBIN=${MINDI_PREFIX}/sbin
MINDI_LIB=${MINDI_PREFIX}/lib/mindi

EXTRA_SPACE=24576         ; # increase if you run out of ramdisk space
IA64_BOOT_SIZE=8192       ; # size of the ia64 boot disk
TMP_ROOT=/tmp
WRITE_BOOT_FLOPPIES="yes" ; # do you want to be propted to write floppy images
PROMPT_WRITE_BOOT_FLOPPIES="yes"
	# do you want to be prompted to write
	# floppy images out to floppy disks?
	# if 'no', images will not be written to floppies

PROMPT_MAKE_CD_IMAGE="yes"
	# Ask if you want to make a CD Image to be written?
	# if this is set to 'no', then the image will be created automatically

USE_OWN_KERNEL="no"
	# If set to "no", you will be prompted for whether or not
	# you want to use your own kernel, or the supplied default.
	# If "yes" mindi will automatically use your own kernel.
MINDI_CONFIG="$MINDI_CONF/mindi.conf"
if [ -f $MINDI_CONFIG ]; then
	. $MINDI_CONFIG
fi
MY_FSTAB=/etc/fstab
FLOPPY_MODS="ide-floppy floppy"
TAPE_MODS="ht st osst ide-tape ide_tape"
SCSI_MODS="3c59x 3w-xxxx 53c7,8xx a100u2w a320raid aacraid advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 ide-scsi ieee1394 imm in2000 initio ips iscsi isp megaraid mptbase mptscsih NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qlogicfas qlogicfc qlogicisp raw1394 scsi_debug scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000"

# ide-probe-mod
IDE_MODS="ide ide-generic ide-detect ide-mod ide-disk ide-cd ide_cd ide-cs ide-core ide_core libata edd paride ata_piix libata"
PCMCIA_MODS="pcmcia_core ds yenta_socket"
USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_storage hid uhci_hcd ehci_hcd uhci-hcd ehci-hcd usbkbd"
CDROM_MODS="$TAPE_MODS $FLOPPY_MODS $IDE_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_cp437 sg sr_mod zlib_inflate $USB_MODS $PCMCIA_MODS"
NET_MODS="sunrpc nfs nfsacl lockd loop mii e100 bcm5700 e1000 eepro100 tg3 pcnet32"
EXTRA_MODS="$CDROM_MODS vfat fat loop linear raid0 raid1 raid5 lvm-mod dm-mod jfs xfs xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfsd lockd sunrpc jbd"
LOGFILE=/var/log/mindi.log
FDDEVICE=/dev/fd0             ; # 1.44MB floppy #0
CACHE_LOC=/var/cache/mondo-archive
FORCE_DUAL_FLOPPIES=no

BOOT_MEDIA_MESSAGE="\
To format and restore all files automatically, type 'nuke' <enter>.\n\
To restore some/all files interactively, type 'interactive' <enter>.\n\
To compare the archives with your filesystem, type 'compare' <enter>.\n\
To boot to a command-line prompt (expert mode), type 'expert' <enter>.\n\
You may add one or more of the following parameters as well:-\n\n\
		donteject - mondorestore will not eject the CD; this is useful if, for\n\
		            instance, your PC's case has a concealed CD-ROM drive\n\
		noresize  - your mountlist will not be adjusted to use your unallocated\n\
		            hard disk space\n\
		textonly  - do not call any Newt library routines; this is unattractive\n\
		            but valuable if you find your Newt library has bugs in it\n\n\
e.g. Type 'nuke donteject textonly' if you have an unstable Newt library and \n\
a PC whose CD-ROM drive tray would be damaged if it unexpectedly ejected.\n\
"

# ----------------------------------------------------------------------------





AbortHere() {
	[ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
	Die "Program is terminating in response to signal received from OS/user"
}



HackSyslinuxFile() {
	local incoming
	incoming=`ReadLine`
	while [ "$incoming" ] ; do
		echo -en "$incoming" | sed s/24000/$1/
		if [ "`echo "$incoming" | grep append`" ] ; then
		    echo -en " $ADDITIONAL_BOOT_PARAMS"
		fi
		echo -en "\n"
		incoming=`ReadLine`
	done
	if [ -e "$MINDI_LIB/memtest.img" ] ; then
#        echo -en "label memtest\n  kernel memtest.bin\n\n"
		echo -en "label memtest\n  kernel memdisk\n  append initrd=memtest.img\n\n"
#        echo "Yep, this is a multi-function CD" > $2/MULTIFUNC
	fi
}



AbortIfYourDistroIsAPieceOfStercus() {
	which which > /dev/null 2> /dev/null || Die "Please install 'which'."
	which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
	which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
	which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
	if which awk &> /dev/null ; then
	if ! which gawk &> /dev/null ; then
		LogIt "You have awk but not gawk. Please note that mindi works fine with a _sane_ awk binary. If your awk binary misbehaves then please contact your vendor or distribution's mailing list for technical support."
	fi
	fi
	which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
	which afio > /dev/null 2> /dev/null || LogIt "afio not found... mindi doesn't need afio but Mondo does... Be aware...\n"
	[ ! -e "/etc/issue.net" ] && > /etc/issue.net
	FDISK=$MINDI_SBIN/parted2fdisk
	FDISKLOG=/tmp/parted2fdisk.log
	touch $FDISKLOG
#    if [ "`cat /etc/issue.net 2> /dev/null | fgrep -i "debian"`" ] ; then
#        LogIt "Warning - You are a Debian user. If mindi doesn't generate a good mountlist, it's because of a bug in YOUR awk binary. Don't tell me about it. Tell awk.deb's maintainer about it."
#    fi
	[ ! -e "$FDISK" ] && Die "Cannot find (s)fdisk"
}



AbortIfMkfsVfatMissing() {
	#if fgrep "vfat" /etc/fstab &> /dev/null ; then
		if ! which mkfs.vfat &> /dev/null ; then
		    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
		fi
	#fi
}





Aborted() {
	trap SIGHUP SIGTERM SIGTRAP SIGINT
	[ "$imagesdir" != "" ] && rm -f $imagesdir/mindi*img $imagesdir/*gz $imagesdir/mindi.iso
	[ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
	Die "User abort."
}


AddFileToCfgIfExists() {
	[ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
}



AddFileToDir() {
	local filename minidir_root noof_disks diskno res filesize disksize would_occupy zipsize complevel cutoff compressed_fname siz
	filename=$1
	minidir_root=$2
	noof_disks=$3

#    diskno=1
	diskno=$noof_disks
	mkdir -p $minidir_root/$diskno
	[ "$LAST_COMPRESSED_SIZE" = "" ] && LAST_COMPRESSED_SIZE=0
	if [ ! -e "$filename" ] ; then
	if [ -h "$filename" ] ; then
		cp --parents -pRdf $filename $minidir_root/$diskno
		return $noof_disks
	else
		Die "AddFileToDir asked me to add $filename, which does not exist. Oops! Did you run out of disk space or is your Linux distro severely broken?"
	fi
	fi
# move to the disk that has room on it (or end up using the last, if all full)
	while [ "$diskno" -lt "40" ] ; do
	mkdir -p $minidir_root/$diskno
		filesize=`du -sk $filename | cut -f1`
	cp --parents -Rdf $filename $minidir_root/$diskno
		if [ "$filesize" -le "4" ] ; then
		    siz=$filesize
		elif [ ! -f "$filename" ] ; then
		    siz=0
		else
		    siz=`grep -m 1 "$filename.gz$" $minidir_root/compressed/compressed.txt | cut -f1`
		    [ "$siz" = "" ] && Die "FIXME - can't find $filename's size."
		    siz=$(($siz-2));# to allow for sectors & the fact that they round up
		fi
	[ ! "$siz" ] && siz=4
	[ "$siz" -lt "0" ] && siz=0
		LAST_COMPRESSED_SIZE=$(($LAST_COMPRESSED_SIZE+$siz))
	[ "$LAST_COMPRESSED_SIZE" -le "$MAX_COMPRESSED_SIZE" ] &&return $diskno
	echo "disk=$diskno siz=$LAST_COMPRESSED_SIZE" >> $LOGFILE
	LAST_COMPRESSED_SIZE=0
	rm -f $minidir_root/$diskno/$filename
		diskno=$(($diskno+1))
	done
	return 0 ; # failed
}




AddKeyboardMappingFile() {
	local mappath r included_list included_item i res ii sss
	mappath=$1
	KBDEPTH=$(($KBDEPTH+1))
	[ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 1170, approx.)"
	if [ -e "$bigdir/$mappath" ] ; then
	echo "$mappath already added" >> $LOGFILE
	return
	elif [ -d "$bigdir/$mappath" ] ; then
		echo "Cannot add $mappath: it's a directory. Sorry."
		return
	fi
	echo "Added kbd map $mappath" >> $LOGFILE
	if [ ! -e "$mappath" ] ; then
		mappath=`find $KEYDIR/keymaps | grep "i[3-8]86" | grep "$locale[^r][^/]" | grep -vx " *#.*"`
		if [ ! -e "$mappath" ] ; then
		    LogIt "Cannot add $mappath: kbd map file not found"
		    return
		fi
	else
	echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
	fi

	mkdir -p $bigdir/etc
	cp --parents -pRdf $mappath $bigdir || LogIt "AKMF -- Could not copy $mappath to $bigdir"
	if [ "`echo $mappath | fgrep ".gz"`" ] ; then
		included_list=`gzip -dc $mappath | fgrep -i include | sed s/'"'// | sed s/'"'// | cut -d' ' -f2`
	else
		included_list=`cat $mappath | fgrep -i include | sed s/'"'// | sed s/'"'// | cut -d' ' -f2`
	fi
	for included_item in $included_list ; do
	if [ ! -e "$included_item" ] ; then
		    sss=`find $KEYDIR/keymaps | fgrep "${included_item}.inc"`
		[ "$sss" = "" ] && sss=`find $KEYDIR/keymaps | fgrep "$included_item"`
		for ii in $sss ; do
		        [ -e "$ii" ] && AddKeyboardMappingFile $ii
		done
	else
		AddKeyboardMappingFile $included_item
	fi
	done
}







ChopUpAndCopyFile() {
	local filename slicesize outdir res biggienumber filesize sliceno noof_slices testfile scratchfile
	filename=$1
	outdir=$2
	slicesize=$3
	biggienumber=$4

	[ -d "$filename" ] && Die "Cannot chop up $filename: it's a directory. Please amend deplist.txt accordingly."
	mkdir -p $outdir

	sliceno=0
	scratchfile=$TMP_ROOT/blah.$$.dat
	cp -f $filename $scratchfile || Die "CUACF -- cannot copy $filename to $scratchfile - did you run out of disk space?"
	[ "`head $scratchfile -n1 | fgrep "bin/sh"`" != "" ] && StripComments $scratchfile "-$filename-"
	[ "`echo "$filename" | fgrep "etc/termcap"`" != "" ] && StripComments $scratchfile "-$filename-"
	if [ "`echo "$filename" | fgrep "lib/modules/" | grep "\.*o\.gz"`" != "" ] ; then
	mv $scratchfile $scratchfile.gz
	gunzip -f $scratchfile || LogIt "Cannot gunzip $scratchfile.gz"
	filename=`echo "$filename" | tr '.' '#' | sed s/#o#gz/#o/ | sed s/#ko#gz/#ko/ | tr '#' '.'`
	fi
	filesize=`du -sk $scratchfile | cut -f1`
	noof_slices=$(($filesize/$slicesize))
	echo "$filename" > $outdir/slice-$biggienumber.name
	echo "$filesize" > $outdir/slice-$biggienumber.size
	[ -x "$scratchfile" ] && StripExecutable $scratchfile "-$filename-"
	while [ "$sliceno" -le "$noof_slices" ] ; do
		dd if=$scratchfile skip=$(($sliceno*$slicesize)) of=$outdir/slice-$biggienumber.`printf "%03d" $sliceno` bs=1k count=$slicesize 2> /dev/null
		sliceno=$(($sliceno+1))
	done
	rm -f $scratchfile
}


CopyBootBFile() {
	local copy_to copy_from possible_locations liloc
	copy_to=$1
	copy_from=/boot/boot.b
	liloc=`which lilo.real 2>/dev/null`
	[ $liloc ] || liloc=`which lilo 2>/dev/null`
	if [ $liloc ]; then
		if ! [ `strings $liloc | grep "boot\.b"` ]; then
		    LogIt "boot.b files built into lilo; I'll create a dummy."
		    > $copy_to
		    return 0
		fi
	fi
	if [ ! -f "$copy_from" ] ; then
		LogIt "OK, you don't have a /boot/boot.b file, which is odd because most _good_ Linux distributions come with one, even if it's only a softlink"
		copy_from=`cat /etc/lilo.conf | grep install= | grep "\.b" | cut -d'=' -f2`
		if [ ! -f "$copy_from" ] ; then
		    LogIt "Nor can I find it from your /etc/lilo.conf file. This is very odd."
		    copy_from=`FindSensibleBootBFile`
		    LogIt "I'm going to use '$copy_from'"
		fi
	fi
	cp -f $copy_from $copy_to || LogIt "CBBF -- warning -- cannot find your boot.b file. That's it, I quit... (j/k)"
}




CopyDependenciesToDirectory() {
	local outdir incoming fname filesize counter
	outdir=$1
	mkdir -p $outdir
	incoming=`ReadLine`
	counter=0
	while [ "$incoming" != "" ] ; do
	if [ -d "$incoming" ] ; then
		    find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir
		elif [ -e "$incoming" ] ; then
		    filesize=`du -sk $incoming | cut -f1`
		    if [ "$filesize" -gt "$(($CHOPSIZE*2))" ] && [ ! -h "$incoming" ] ; then
		        ChopUpAndCopyFile $incoming $outdir $CHOPSIZE $BIGNO
		        BIGNO=$(($BIGNO+1))
		    else
		        cp --parents -Rdf $incoming $outdir || Die "Cannot copy $incoming to $outdir - did you run out of disk space?"
		if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] ; then
		    gunzip -f $outdir/$incoming || LogIt "Cannot gunzip $outdir/$incoming"
		fi
		[ -x "$outdir" ] && StripExecutable $outdir "-$filename-"
		    fi
		counter=$(($counter+1))
		if [ "$counter" -ge "5" ] ; then
		counter=0
		    echo -en "."
		fi
		fi
		incoming=`ReadLine`
	done
}



CopyImageToDisk() {
	local image dev procno res comment
	image=$1
	dev=$2
	comment=$3
	[ ! -f "$image" ] && [ ! -b "$image" ] && Die "Image $image does not exist. Did you run out of disk space?"
	Prompt "About to write $comment. Please press ENTER."
	echo -en "Formatting disk..."
	if which fdformat > /dev/null ; then
	fdformat -n $dev > /dev/null 2> /dev/null || Die "Cannot format $dev - is your Linux distro broken?"
	elif which superformat > /dev/null ; then
	superformat $dev > /dev/null 2> /dev/null || Die "Cannot format $dev - is your Linux distro broken?"
	else
	Die "Please install either fdformat or superformat."
	fi
	echo -en "\rWriting $comment"
	if echo $image | grep "mindi-[r|b]oot\.1440" &> /dev/null ; then
	cat $image > $dev &
	else
	dd if=$image of=$dev &> /dev/null &
	fi
	procno=$!
	ps $procno > /dev/null 2> /dev/null
	while [ "$?" -eq "0" ] ; do
		sleep 3
		echo -en "."
		ps $procno > /dev/null 2> /dev/null
	done
	echo -e "$DONE"
	LogIt "$comment has been written."
}





CountItemsIn() {
	local r
	r=0
	for q in $1 ; do
	r=$(($r+1))
	done
	echo $r
}






CreateDataDiskImagesFromTarballs() {
	local tardir outdir diskno noof_disks kp
	tardir=$1
	outdir=$2
	noof_disks=$3

	mkdir -p $outdir
	diskno=1
	echo -en "Creating data disk "
	while [ "$diskno" -le "$noof_disks" ] ; do
	echo -en "#$diskno..."
	cp -f $tardir/$diskno.tar.gz $outdir || LogIt "[line 250] Cannot copy $tardir/$diskno.tar.gz to $outdir"
		CreateOneDataDiskImage $tardir/$diskno.tar.gz $outdir/mindi-data-$diskno.img $diskno $noof_disks
		diskno=$(($diskno+1))
	done
	mv -f $tardir/all.tar.gz $outdir
	du -sk $outdir/*gz >> $LOGFILE
	echo -e "$DONE"
}



CreateOneDataDiskImage() {
	local tarball imagefile dev diskno noof_disks mountpoint
	tarball=$1
	imagefile=$2
	diskno=$3
	noof_disks=$4

	mountpoint=$TMP_ROOT/mountpoint.$$
	mkdir -p $mountpoint
	dd if=/dev/zero of=$imagefile bs=1k count=1440 &> /dev/null || LogIt "Cannot dd (CODI)\n"
	mke2fs -N 12 -F $imagefile > /tmp/mke2fs.$$ 2>> /tmp/mke2fs.$$
	[ "$?" -ne "0" ] && cat /tmp/mke2fs.$$
	rm -f /tmp/mke2fs.$$
	mount -t ext2 -o loop $imagefile $mountpoint || Die "Can't loopmount $mountpoint; does your kernel support loopfs? If not, please recompile your kernel. Your Linux distro is broken."
	mv $tarball $mountpoint/
	if [ "$?" -ne "0" ] ; then
	umount $mountpoint
	Die "Tarball $tarball is too big for disk! (CODI)\nTell Hugo to adjust MAX_COMPRESSED_SIZE"
	fi
	[ "$diskno" -eq "$noof_disks" ] && echo "This is the last disk ($diskno=$noof_disks)" >> $mountpoint/LAST-DISK
	umount $mountpoint || LogIt "Cannot umount (CODI)\n"
	rmdir $mountpoint || LogIt "Cannot rmdir (CODI)\n"
}



DidMondoCallMe() {
	local res

	res=0
	[ "`ps ax | fgrep "mondoarchive" | grep -v "grep"`" ] && res=$(($res+1))
	[ -f "/var/run/monitas-mondo.pid" ] && res=$(($res+1))
	[ "$res" -gt "1" ] && echo "yes"
}




Die() {
	local my_partitions i
	echo "MINDI_VERSION is $MINDI_VERSION" >> $LOGFILE
	if [ "$1" = "" ] ; then
	LogIt "Fatal error\n"
	else
	LogIt "Fatal error. $1\n"
	fi
	sync
	cd /

	my_partitions=`mount | fgrep $$ | cut -f1 -d' '`
	[ "$my_partitions" != "" ] && umount $my_partitions
	[ "$TMP_ROOT" != "/tmp" ] && rm -Rf $TMP_ROOT
	cd /tmp
	mkdir -p mindi.err
	for i in /etc/fstab /etc/lilo.conf /etc/raidtab $LOGFILE /var/log/mondo-archive.log /tmp/mountlist.txt.$$ $FDISKLOG ; do
		[ -e "$i" ] && cp -f $i mindi.err/
	done
	rm -f mindi.err.*.tgz
	tar -cf - mindi.err | gzip -9 > mindi.err.$$.tgz
	rm -Rf mindi.err /tmp/mountlist.txt.$$ mindilinux $FDISKLOG
	LogIt "Please e-mail a copy of /tmp/mindi.err.$$.tgz to the mailing list."
	LogIt "See http://www.mondorescue.org for more information."
	LogIt "WE CANNOT HELP unless you enclose that file."
	exit 1
}




DropOptimizedLibraries() {
	local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
	filelist=$1
	outdir=$2

	list_of_optimized_libraries=`cat $filelist | grep "lib/i[5-7]86/"`
	if [ "$list_of_optimized_libraries" = "" ] ; then
	return 0
	fi
	echo -en "Dropping i686-optimized libraries if appropriate"
	for optimized_lib_name in $list_of_optimized_libraries ; do
	echo -en "."
	reason=""
	vanilla_lib_name=`echo "$optimized_lib_name" | sed s/i[5-7]86// | tr -s '/' '/'`
	echo "$vanilla_lib_name" >> $filelist
	resolved=$vanilla_lib_name
	echo "Adding $resolved to filelist" >> $LOGFILE
	while [ -h "$resolved" ] ; do
		resolved=`ls $resolved -l|tr -s ' ' '\t'|$AWK '{printf $NF;}'`
		LocateFile $resolved >> $filelist
		echo "Adding $resolved to filelist" >> $LOGFILE
	done
	mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
	rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
	ln -sf $vanilla_lib_name $outdir$optimized_lib_name
	echo "Excluding $optimized_lib_name" >> $LOGFILE
	cat $filelist | fgrep -vx "$optimized_lib_name" > $filelist.tmp
	echo "Replacing it with $vanilla_lib_name" >> $LOGFILE
	echo "$vanilla_lib_name" >> $filelist.tmp
	mv -f $filelist.tmp $filelist
	done
	cat $filelist | sort | $AWK '{ print $1; }' | uniq > $filelist.tmp
	mv -f $filelist.tmp $filelist
	echo -e "$DONE"
}




FindAndAddUserKeyboardMappingFile() {
	local r res mapfile mappath included_item included_list keyfile mp locale
	LogIt "Analyzing your keyboard's configuration."
	KEYDIR=/lib/kbd
	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd		# Slackware
	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
	if [ ! -e "$KEYDIR" ] ; then
	LogIt "Keyboard mapping directory not found. I shall use default map at boot-time."
	return 0
	fi
	if [ -e "/etc/sysconfig/keyboard" ] ; then
	echo "Red Hat-style config detected." >> $LOGFILE
	keyfile=/etc/sysconfig/keyboard
	elif [ -e "/etc/rc.d/rc.keymap" ] ; then
 	echo "Slackware-style config detected." >> $LOGFILE
 	keyfile=/etc/rc.d/rc.keymap
	elif [ -e "/etc/rc.config" ] ; then
		echo "Debian-style config detected." >> $LOGFILE
	keyfile=/etc/rc.config
	elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
		echo "Debian-style config detected." >> $LOGFILE
	echo -en "Adding the following keyboard mapping tables: "
	mkdir -p $bigdir/tmp
	echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
	KBDEPTH=0
	mkdir -p $bigdir/etc/console
	cp /etc/console/boottime.kmap.gz $bigdir/etc/console
	echo -e "$DONE"
	return 0
	else
	echo -en "Searching for rc.config ..."
	keyfile=`find /etc -name rc.config | head -n1`
	if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
		LogIt "Unknown config detected. Default keyboard map will be used."
		return
	else
		echo "Found $keyfile" >> $LOGFILE
	fi
	fi
	if [ ! -e "$KEYDIR/keymaps" ] ; then
		LogIt "Keyboard mapping directory not found. Default keyboard map will be used."
		return
	fi
	echo "keyfile=$keyfile" >> $LOGFILE
	locale=`cat "$keyfile" |fgrep KEYTABLE | tr -d '"' |cut -d'=' -f2`
	[ ! "$locale" ] && locale=`cat "$keyfile" | grep '.map$' | sed 's/^.* //'`		# Slackware
	echo "locale=$locale" >> $LOGFILE
	mp=`find $KEYDIR/keymaps | grep "i[3-8]86" | fgrep "${locale}." | grep -vx " *#.*"`
	[ ! "$mp" ] && mp=`find $KEYDIR/keymaps | grep "i[3-8]86" | grep "$locale[^r][^/]" | grep -vx " *#.*"`
	for i in $mp ; do
		mappath=$i
		[ -e "$i" ] && [ ! -d "$i" ] && break
	done
	if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
	   mappath=$(locate */kbd/keymaps/*/$locale)
	fi
	echo "mappath = $mappath" >> $LOGFILE
	if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
	LogIt "Keyboard mapping file not found. Default keyboard map will be used."
	return
	fi
	echo -en "Adding the following keyboard mapping tables: "
	mkdir -p $bigdir/tmp
	echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
	KBDEPTH=0
	AddKeyboardMappingFile $mappath
	echo -e "$DONE"
	return 0
}





FindHomeOfMindiAndMondo() {
# nice patch from Martin Fürstenau
	for mh in /usr/lib /usr/opt /usr/share /usr/local /usr/local/share /usr/share/local /opt /opt/share /usr /ramdisk/usr/local/share /ramdisk/usr/share ; do
		if [ ! -L $mh ] ; then
		   MH_PATH=$mh
		   SYMLINK=0
		   while [ $MH_PATH != "/" ] ; do
		   MH_PATH=`dirname $MH_PATH`
		       if [ -L $MH_PATH ] ; then
		  SYMLINK=1
		   fi
		   done

		   if [ $SYMLINK -ne 1 ] ; then
		  if [ -d "$mh/mondo" ] && [ -e "$mh/mondo/restore-scripts" ] ; then
		      [ "$MONDO_HOME" ] && Die "You have multiple instances of Mondo - one at $MONDO_HOME and one at $mh/mondo"
		      MONDO_HOME=$mh/mondo
		  fi
		   fi
		fi
	done
# end patch

	[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
	echo "MINDI_LIB = $MINDI_LIB" >> $LOGFILE
	echo "MINDI_SBIN = $MINDI_SBIN" >> $LOGFILE
	[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
	echo "MINDI_CONF = $MINDI_CONF" >> $LOGFILE
	echo "MONDO_HOME = $MONDO_HOME" >> $LOGFILE
	mkdir -p $CACHE_LOC
}





FindIsolinuxBinary() {
	ISOLINUX=/usr/lib/isolinux.bin
	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
	[ ! -e "$ISOLINUX" ] && ISOLINUX=`locate isolinux.bin | grep -x "/.*/isolinux.bin"`
	[ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.com and click on 'Download'"
	echo "Found isolinux.bin at $ISOLINUX" >> $LOGFILE
}



FindLiloBinary() {
	if which lilo &> /dev/null ; then
	if which lilo.real > /dev/null 2> /dev/null ; then
		LILO_EXE=lilo.real
		LogIt "lilo.real found; will be used instead of lilo (*grumble* *mutter*)"
	else
		LILO_EXE=lilo
	fi
	$LILO_EXE -V | fgrep "21.6" > /dev/null && Die "Please upgrade LILO. Your verison has a serious bug. If you're not _using_ LILO, fine, uninstall it. :)"
	else
	LILO_EXE=`which false`
	fi
}

FindELiloBinary() {
	if which elilo &> /dev/null ; then
	LILO_EXE=elilo
	else
	LILO_EXE=`which false`
	fi
}


FixPathIfBroken() {
		if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
		PATH=$PATH:/sbin:/usr/sbin
		export PATH
		echo "Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily." >> $LOGFILE
		echo "However, you may wish to ask your vendor to provide a permanent fix..." >> $LOGFILE
		echo "You might like to call 'su -' instead of 'su', for example." >> $LOGFILE
	fi
}



FindSensibleBootBFile() {
	local i out last
	out=""
	last=""
	for i in `find /boot -type f | grep -v chain | grep -v os2 | sort -u` ; do
	if [ "`strings $i 2> /dev/null | head -n1`" = "LILO" ] ; then
		out="$out $i"
		    last="$i"
	fi
	done
	echo "$last"
}



FindSpecificModuleInPath() {
	local modpaths pwd line
	pwd=`pwd`
	if [ "$YOUR_KERNEL_SUCKS" ] ; then
	cd $TMP_ROOT
	else
	cd /
	fi
	if [ ! -e "$1" ] ; then
	LogIt "Warning - cannot search specific path '$1'"
	return 1
	fi
	modpaths=`find $1 -name $2.*o -type f`
	[ "$?" -ne "0" ] && Die "find $1 -name $2.o -type f --- failed"
	[ "$modpaths" = "" ] && modpaths=`find $1 -name $2.o.gz -type f`
	[ "$modpaths" = "" ] && modpaths=`find $1 -name $2.ko.gz -type f`
	[ "$modpaths" = "" ] && modpaths=`find $1 -name $2 -type f`
	echo "$modpaths"
	cd $pwd
}



GenerateGiantDependencyList() {
	local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved

	echo -en "Analyzing dependency requirements"
	outfile=$1
	tempfile=$TMP_ROOT/$$.txt
	incoming=`ReadLine`

	> $tempfile
	progress=0
	res=0
	noof_lines=$2
	while [ "$incoming" != "" ] ; do
	if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
#	    echo "Skipping '$incoming'"
		incoming=`ReadLine`
		continue
	fi
	if [ "$incoming" = "LVMFILES:" ] ; then
		break
	fi
#	echo "Processing '$incoming'."
#	sleep 1
		filelist=`GenerateListForFile "$incoming"`
		r=$?
		[ "$r" -ne "0" ] && LogIt "$incoming not found\n"
		res=$(($res+$r))
#	echo "'$incoming' generates filelist '$filelist'" >> $LOGFILE
		for fname in $filelist ; do
		    [ "$fname" != "" ] && echo "$fname" >> $tempfile
	done
	progress=$(($progress+1))
	echo -en "\r\t\t\t\t\t\t\t\t"
	i=$(($progress*100))
	i=$(($i/$noof_lines))
	echo -en "$i"
	echo -en "%"
	modres=$(($progress%4))
	[ "$modres" -eq "0" ] && echo -en "\t/"
	[ "$modres" -eq "1" ] && echo -en "\t-"
	[ "$modres" -eq "2" ] && echo -en "\t\\"
	[ "$modres" -eq "3" ] && echo -en "\t|"
		incoming=`ReadLine`
	done
	if  [ "$incoming" = "LVMFILES:" ] ; then
	incoming=`ReadLine`
	lvmversion=""
	while [ "$incoming" != "" ] ; do
		if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
#		echo "Skipping '$incoming'"
		incoming=`ReadLine`
		continue
		fi
		filelist=`GenerateListForFile "$incoming"`
		for tool in $filelist ; do
		    lvmresolved=`ResolveSoftlink $tool`
		    if echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
		    if [ "$lvmversion" = "" ] ; then
			lvmversion=`$lvmresolved`
			echo "$lvmresolved" >> $tempfile
		    fi
		    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
		    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
		    if [ -e "$toolpath" ] ; then
			echo "$toolpath" >> $tempfile
			echo "$tool" >> $tempfile
		    else
			toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
		    fi
		    if [ -e "$toolpath" ] ; then
			echo "$toolpath" >> $tempfile
			echo "$tool" >> $tempfile
		    else
			echo "Where are your LVM-Tools? Couldn't find $tool"
		    fi
		else
		    echo "$tool" >> $tempfile
		fi
		done
		progress=$(($progress+1))
		echo -en "\r\t\t\t\t\t\t\t\t"
		i=$(($progress*100))
		i=$(($i/$noof_lines))
		echo -en "$i"
		echo -en "%"
		modres=$(($progress%4))
		[ "$modres" -eq "0" ] && echo -en "\t/"
		[ "$modres" -eq "1" ] && echo -en "\t-"
		[ "$modres" -eq "2" ] && echo -en "\t\\"
		[ "$modres" -eq "3" ] && echo -en "\t|"
		incoming=`ReadLine`
	done
	fi
	echo -en "$DONE\nMaking complete dependency list"

	cat $tempfile | tr -s '/' '/' | sort | uniq > $tempfile.new
	mv -f $tempfile.new $tempfile
	> $outfile.pre
	progress=0
	noof_lines=`cat $tempfile | wc -l`
	for fname in `cat $tempfile` ; do
		tempdepfile=`mktemp /tmp/mindilinux/tempdepfile.XXXXXX`
		LocateDeps $fname > $tempdepfile
	echo "$fname" >> $outfile.pre
		cat $tempdepfile >> $outfile.pre
#        echo "$fname ----> dependencies:-" >> $LOGFILE
#        cat $tempdepfile | tr -s '/' '/' | sort | uniq >> $LOGFILE
#        echo -en "(end of deplist of $fname)\n\n" >> $LOGFILE
		rm -f $tempdepfile
	progress=$(($progress+1))
		echo -en "\r\t\t\t\t\t\t\t\t"
		i=$(($progress*100))
		i=$(($i/$noof_lines))
		echo -en "$i"
		echo -en "%"
 	modres=$(($progress%4))
		[ "$modres" -eq "0" ] && echo -en "\t/"
		[ "$modres" -eq "1" ] && echo -en "\t-"
		[ "$modres" -eq "2" ] && echo -en "\t\\"
		[ "$modres" -eq "3" ] && echo -en "\t|"
	done
	if [ "`DidMondoCallMe`" ] ; then
	mkdir -p $bigdir/tmp
	mkdir -p $bigdir/sbin
	mkdir -p $bigdir/bin
	if [ -e "$MONDO_TMP/post-nuke.tgz" ] ; then
		LogIt "\nIncorporating post-nuke tarball"
		old_pwd=`pwd`
		cd $bigdir
		tar -zxf $MONDO_TMP/post-nuke.tgz || LogIt "Error occurred when untarring post-nuke tarball"
		cd $old_pwd
	fi
 	if cp -f $MONDO_TMP/mondo*restore $bigdir/usr/bin ; then
		    LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
	else
		LogIt "Cannot find mondo*restore in mondo's tempdir, $MONDO_TMP"
		LogIt "I bet you've got a spare copy of Mondo or Mindi floating around on your system."
		    LogIt "If Mindi was called by Mondo then send me a bug report. It not, type 'ps ax' to see which Mondo-related process is still running; then kill it. :-) Finally, run Mindi again."
		    Die "Odd."
		fi
		cp -f $MONDO_TMP/BOOTLOADER.* $bigdir 2> /dev/null || LogIt "\nMondo v1.2x defaults to LILO as the bootloader, BTW."
	if [ -e "$MONDO_TMP/start-nfs" ] ; then
		LogIt "Incorporating NFS-related settings"
		cp -f $MONDO_TMP/start-nfs $bigdir/sbin || Die "Cannot find start-nfs"
		for r in NFS-SERVER-MOUNT NFS-SERVER-PATH NFS-DEV NFS-CLIENT-IPADDR NFS-SERVER-IPADDR ; do
		cp -f $MONDO_TMP/$r $bigdir/tmp || Die "Cannot copy $r - did you run out of disk space?"
		        echo "Copying $r to ramdisk" >> $LOGFILE
		done
	fi
	fi
	 cat $outfile.pre | tr ' ' '\n' | tr -s '/' '/' | fgrep -vx "" | sort -u | egrep -v "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
	rm -f $tempfile $outfile.pre
	[ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
	return $res
}





GenerateListForFile() {
	local files_found loc fname incoming i res
	incoming="$1"
	files_found=""
	res=0

	for fname in $incoming ; do
		files_found="$files_found `LocateFile $fname`"
	done

	echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
}



# Returns all disk devices which are part of a raid array

GetAllRaidMembers() {
	$AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
}


GetFileSizeList() {
	local i
	for i in `find $1 -type d -o -print` ; do
		du -sk $i
	done
}



GetHomeDir() {
	local res loc
	loc=`which $1 2>/dev/null`
	res=`file $loc | $AWK '{print $NF;}'`
	dirname $res
}





# Searches parent raid device of given disk device
# $1: disk device (i.e. /dev/hda1)

GetParentRaidDev() {
	$AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {dev=\$2} /^[[:space:]]*device/ {if(\$2==\"$1\") {print dev; exit}}" < /etc/raidtab
}



# Searches members of raid device
# $1: raid device (/dev/md...)

GetRaidDevMembers() {
	$AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
}


HackAwk() {
	local pathname filename dir old_pwd new_fname
	pathname=$1
	filename=$2
	dir=`echo "$pathname" | sed s/$filename//`
	old_pwd=`pwd`
	cd $dir
	[ -f "$filename" ] || Die "Can't find $filename at $dir"
	new_fname="an.icky.icky.spider.ewww"
	[ "$filename" = "gawk" ] && new_fname="awk"
	[ "$filename" = "awk" ] && new_fname="gawk"
	ln -s $filename $new_fname
	cd $old_pwd
}




HackMountlist() {
	local scratchdir outfile partlist pst partstr \
res partition swapsize
	scratchdir=$TMP_ROOT
	outfile=$1

	mkdir -p $outfile
	rm -Rf $outfile
	> $outfile
	partlist=$(mount | cut -d' ' -f1,3,5 \
	| egrep -v "((none|/tmp|/ISOs|/proc|/dev/root) )|/mnt/" \
	| tr ' ' '|')

	echo -n "Modifying mountlist..."

	if [ ! -f "/mountlist.hacked" ] ; then
		Die "Can't find modified mountlist.hacked!"
	else
		cp /mountlist.hacked "$outfile"
		LogIt "Done. (Created by auto-archive, I assume?)\n"
	fi
}




HackPathsToFailsafe() {
	local incoming newpath kver stub i pwd
	kver=`uname -r`
	incoming=`ReadLine`
	pwd=`pwd`
	cd $TMP_ROOT
	while [ "$incoming" != "" ] ; do
	stub=`basename $incoming`
	newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
	for i in $newpath ; do
		echo "$i"
	done
	read incoming
	done
	cd $pwd
}



ListAllPartitions() {
	local res currline partition all_partitions ap_orig remaining i j

	cat $MY_FSTAB | grep -vx " *#.*" | grep -vx " *none.*" | $AWK '/^\/dev\/[imhs]d||LABEL\=\// && !/fdd|cdr|zip|floppy/ {print $1}'
#    for partition in `$FDISK -l | tr -s ' ' '\n' | grep /dev` ; do 
#        [ -e "$i" ] && all_partitions=echo "$i"
#    done
	[ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
	return
}





ListImagesForUser() {
	local path fname
	path=$1
	echo -en "In the directory '$path' you will find the images:-\n"
	for fname in `ls $path | fgrep mindi-` ; do
		printf "%19s " $fname
	done
	echo " "
}



ListKernelModulePaths() {
	local module_list module fname oss r kern
	oss="/root/oss/modules"
	module_list=`ListKernelModules`
###
### Sq-Modification ... Use kernelname for module search path if specified
###
	# kern="`uname -r`"
	if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
	then
	  kern=${kernelname}
	else
	  kern="`uname -r`"
	fi
###
### Sq-Mod End
###
	for module in $module_list $EXTRA_MODS ; do
		r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
	echo "module $module --> $r" >> $LOGFILE
	[ "$r" ] && echo "$r"
	[ -f "$oss" ] && find $oss | fgrep $module
	done
	find /lib/modules/$kern/modules.* -type f 2> /dev/null
	[ -f "$oss" ] && find $oss.* 2> /dev/null
}



ListKernelModules() {
	local output q
	output=""
	for q in `lsmod | sed -n '2,$s/ .*//p'` ; do
	output="$q $output"
	done
	echo "$output"
}



LocateDeps() {
	local incoming fname deps
	incoming="$1"
	for fname in $incoming ; do
		if [ ! -e "$fname" ] ; then
		    echo "Warning - $fname does not exist; cannot be LDD'd." >> $LOGFILE
		if echo $fname | grep lvm &> /dev/null ; then
		echo "This warning only affects you if you are using LVM." >> $LOGFILE
		if lsmod | grep lvm &> /dev/null ; then
		    echo "I think you are, so please take heed!" >> $LOGFILE
#		    LogIt "Where is liblvm? You need it."
		else
		    echo "I don't think you are, so don't worry about it." >> $LOGFILE
		fi
		fi
		elif [ -h "$fname" ] && [ -x "$fname" ] ; then
		echo "$fname is softlink" >> $LOGFILE
#            echo "$fname will not be LDD'd. It is a softlink to `WhatSoftlinkPointsTo $fname`, which should already be in queue to be analyzed." >> $LOGFILE
#            echo "$fname"
		else
		    ldd $fname 2> /dev/null | ProcessLDD $fname
		fi
	done
}



LocateFile() {
	local i path fname_to_find location output resolved tmp stub cache_id loclist
	fname_to_find="$1"
	if [ "$FILE_CACHE" ] ; then
		touch $FILE_CACHE
		output=""; cache_id=`echo $fname_to_find | md5sum`
		output=`sed -n -e "s/^$cache_id //p" $FILE_CACHE`
		if [ ! "$output" = "" ] ; then
		    echo "$output"
		    return 0
		fi
	fi
	if echo "$fname_to_find" | grep -x "/.*" ; then
	output="$fname_to_find"
	location="$fname_to_find"
	while [ -h "$location" ] ; do
		resolved=`WhatSoftlinkPointsTo $location`
		location=$resolved
		output="$location $output"
	done
	echo "$output"
	return 0
	fi
	output=""
	for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
	[ ! -d "$path" ] && continue
	location=`echo "$path/$fname_to_find" | tr -s '/' '/'`
	if echo "$location" | grep "lib/lib" 2> /dev/null ; then
		loclist=`find $path -maxdepth 1 | fgrep "$fname_to_find"`
	else
		loclist=$location
	fi
	for location in $loclist ; do
		[ ! -e "$location" ] && continue
		output="$location $output"
		copies_found=$(($copies_found+1))
		while [ -h "$location" ] ; do
		        resolved=`WhatSoftlinkPointsTo $location`
		        location=$resolved
		        output="$location $output"
		    done
#		resolved=`file $location | $AWK '{print $NF;}'`
#		if [ "`echo "$resolved" | fgrep "/"`" = "" ] ; then
#		    stub=`dirname $location`
#		    output="/$stub/$resolved $output"
#		fi
#	    fi
	done
	done
	if [ "$output" = "" ] ; then
#	echo "$fname_to_find not found" >> /dev/stderr
	return 1
	fi
	echo "$output"
	[ "$FILE_CACHE" ] && echo -ne "$cache_id $output\n" >> $FILE_CACHE
	return 0
}



LogIt() {
	if [ -e /dev/stderr ] ; then
	echo -e "$1" >> /dev/stderr
	elif [ -e /usr/bin/logger ] ; then
	/usr/bin/logger -s $1
	fi
	echo -en "$1" >> $LOGFILE
}







# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg

MakeMondoConfigFile() {
	local outfile use_lzo use_comp use_star
	outfile=$1
	> $outfile
	[ "$TAPESIZE" ]		&& echo "media-size $TAPESIZE" >> $outfile
	[ "$TAPEDEV" ]	        && echo "media-dev $TAPEDEV" >> $outfile
	[ "$FILES_IN_FILELIST" ]	&& echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
	[ "$LAST_FILELIST_NUMBER" ]	&& echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
	[ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
	use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
	use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
	use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
	echo "use-lzo $use_lzo" >> $outfile
	echo "use-star $use_star" >> $outfile
	echo "use-comp $use_comp" >> $outfile
	echo "datestamp `date`" >> $outfile
	[ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
   AddFileToCfgIfExists $MONDO_TMP/NFS-CLIENT-IPADDR nfs-client-ipaddr $outfile
   AddFileToCfgIfExists $MONDO_TMP/NFS-CLIENT-NETMASK nfs-client-netmask $outfile
   AddFileToCfgIfExists $MONDO_TMP/NFS-CLIENT-BROADCAST nfs-client-broadcast $outfile
   AddFileToCfgIfExists $MONDO_TMP/NFS-CLIENT-DEFGW  nfs-client-defgw  $outfile
   AddFileToCfgIfExists $MONDO_TMP/NFS-SERVER-MOUNT  nfs-server-mount  $outfile
   AddFileToCfgIfExists $MONDO_TMP/NFS-SERVER-PATH   nfs-server-path   $outfile
   AddFileToCfgIfExists $MONDO_TMP/NFS-DEV           nfs-dev           $outfile
   AddFileToCfgIfExists $MONDO_TMP/NFS-SERVER-IPADDR nfs-server-ipaddr $outfile
   AddFileToCfgIfExists $MONDO_TMP/ISO-DEV           iso-dev           $outfile
   AddFileToCfgIfExists $MONDO_TMP/ISO-MNT           iso-mnt           $outfile
   AddFileToCfgIfExists $MONDO_TMP/ISO-PREFIX        iso-prefix        $outfile
   AddFileToCfgIfExists $MONDO_TMP/ISODIR            isodir            $outfile
   AddFileToCfgIfExists $MONDO_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
   AddFileToCfgIfExists $MONDO_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
   AddFileToCfgIfExists $MONDO_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
   AddFileToCfgIfExists $MONDO_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
   AddFileToCfgIfExists $MONDO_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
   AddFileToCfgIfExists $MONDO_TMP/DIFFERENTIAL      differential      $outfile
}




MakeModuleLoadingScript() {
	local module fname params modpath kver outerloop i modpaths kver searchpath list_to_echo j
	tmpmodprobe_flag=$1
	outfile=$2
	> $outfile || Die "Cannot create empty $outfile"
	echo -en "#\041/bin/sh\n\n" >> $outfile
	echo "echo -en \"Loading your modules...\"" >> $outfile
	if [ "$YOUR_KERNEL_SUCKS" ] ; then
	kver=$FAILSAFE_KVER
	cd $TMP_ROOT
	searchpath=lib/modules/$kver
	else
###
### Sq-Modification ... Use kernelname for module search path if specified
###
		#kver=`uname -r`
		if [ "${kernelname}" != "" ]
		then
		  kver=${kernelname}
		else
		  kver=`uname -r`
		fi
###
### Sq-Modification end
###
	searchpath=/lib/modules/$kver
	fi
	
	echo -en "for outerloop in 1 2 3 4 5 ; do\necho -en \".\"\n" >> $outfile
	list_to_echo="`ListKernelModules`"
#    LTE=`echo "$list_to_echo" | tr ' ' '\n' | grep -n "" | cut -d':' -f2,3,4 | tr '\n' ' '`
#    lte_old="$LTE"
#    LTE=""
#    for q in $lte_old ; do
#	LTE="$q $LTE"
#    done
#echo "LTE = '$LTE'" >> $LOGFILE
	# Make temporary modprobe.conf file if we are told so
	if [ $tmpmodprobe_flag == "Y" ] ; then
	infile="/tmp/modprobe.conf.mindi.$$"
	cat `find /etc/modprobe.d -maxdepth 1 -name "*" -xtype f` > $infile
	else
	infile="/etc/modules.conf"
	fi
	for module in $list_to_echo $EXTRA_MODS ; do
	params=`sed -n "s/^options \\+$module \\+//p" $infile`
	modpaths=`FindSpecificModuleInPath $searchpath $module`
	for i in $modpaths ; do
		echo "MyInsmod $i $params > /dev/null 2> /dev/null" \
		    | tr '.' '#' \
		    | sed s/#o#gz/#o/ \
		    | sed s/#o#gz/#o/ \
		    | sed s/#ko#gz/#ko/ \
		    | sed s/#ko#gz/#ko/ \
		        | tr '#' '.' >> $outfile

		echo -en "$i added to module list.\n" >> $LOGFILE
	done
	done
	echo -en "done\n" >> $outfile
	echo "echo \"Done.\"" >> $outfile
	chmod +x $outfile
#    cp $outfile /tmp/out.txt
	cd /
	# Remove temporary modprobe.conf file if we have created one
	if [ $tmpmodprobe_flag == "Y" ] ; then
	rm -f $infile
	fi
}





MakeMountlist() {
	local scratchdir mountlist all_partitions current_partition \
partition_size partition_format outstring partition_number \
partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
absolute_partition old_partition_fmt

	echo "Your raw fstab file looks like this:-" >> $LOGFILE
	cat $MY_FSTAB >> $LOGFILE
	echo "Your mountlist will look like this:-"

# scratchdir, mountlist(OUT)
	scratchdir=$TMP_ROOT
	mountlist=$1

# NB: partition = device
# NB: mountpt = where the device is mounted

	[ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"

	rm -f $mountlist
	mkdir -p $mountlist
	rm -Rf $mountlist
	> $mountlist
	echo -en "\rHang on...\r"
	all_partitions=""
	
	if [ -d "/proc/lvm" ] || [ -d "/dev/mapper" ]; then
	echo -en "\rAnalyzing LVM...\r"
	all_partitions=`$MINDI_SBIN/analyze-my-lvm | fgrep ">>>" | cut -d' ' -f2-32`
	fi
	all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
#    echo "all partitions = $all_partitions" > /dev/stderr
	for i in $IMAGE_DEVS ; do
		mount | fgrep "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
	done
	[ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort | uniq | tr '\n ' ' '`"
	printf "        %-15s %-15s %-15s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE (MB)"
	for c_p in $all_partitions ; do
#        echo "c_p = $c_p" > /dev/stderr
	[ "`echo "/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw" | fgrep "$c_p"`" != "" ] || [ "`echo "$c_p" | fgrep "/dev/scd"`" != "" ] || [ "`echo "$c_p" | fgrep "/dev/ram"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | fgrep ":/"`" != "" ] && continue
		[ "`echo "/dev/scd0 /dev/scd1 /dev/sr0 /dev/sr1 /dev/cdrom /dev/cdrom1" | fgrep "$c_p"`" ] && continue
	[ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
	if [ -h "$c_p" ] && [ "`echo "$c_p" | fgrep "/dev/hd"`" = "" ] && [ "`echo "$c_p" | fgrep "/dev/sd"`" = "" ] && [ "`echo "$c_p" | fgrep "/dev/md"`" = "" ] ; then
		    current_partition=`ResolveSoftlink $c_p`
		[ "`echo "$current_partition" | fgrep "/dev/mapper"`" != "" ] && current_partition="$c_p"
		    [ "`echo "/dev/scd0 /dev/scd1 /dev/sr0 /dev/sr1 /dev/cdrom /dev/cdrom1" | fgrep "$current_partition"`" ] && continue
	else
		current_partition="$c_p"
	fi
	[ "$c_p" = "none" ] && continue
		absolute_partition=`ResolveSoftlink $c_p`
	partition_mountpt=`cat $MY_FSTAB | tr -s '\t' ' ' | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
	redhat_label=""
	if [ "`echo "$current_partition" | fgrep -i "LABEL="`" != "" ] ; then
		str_to_find_fmt_with=$current_partition
		redhat_label=`echo "$current_partition" | cut -d'=' -f2`
		actual_dev=`mount -l | fgrep " [$redhat_label]" | cut -d' ' -f1`
#	    partition_mountpt=$redhat_label
		current_partition=$actual_dev
	else
		str_to_find_fmt_with=$current_partition
	fi
	partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
	if [ -d "/proc/lvm" ] && [ "`lvdisplay $current_partition 2> /dev/null`" ] ; then
		partition_size="lvm"
	elif [ -d "/dev/mapper" ] && [ "`lvm lvdisplay $current_partition 2> /dev/null`" ] ; then
		partition_size="lvm"
	else
		partition_size=`SizeOfPartition $current_partition`
		[ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
		[ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
		if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
		partition_size=`fgrep -v "Priority" /proc/swaps | tr -s '\t' ' ' | fgrep "$current_partition" | $AWK '{print $3}'`
		[ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
		        [ "$partition_format" != "swap" ] && partition_format="swap"
		if [ "$partition_size" = "" ] ; then
		    totalsize=0
		    items=0
		    for i in `cat /proc/swaps | tr -s ' ' '\t' | fgrep -v "Filename" | cut -f3` ; do
			totalsize=$(($totalsize+$i))
			items=$(($items+1))
		    done
		            [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
		    [ "$partition_size" -lt "125000" ] && partition_size=125000
		    echo "I'm guessing $c_p is $(($partition_size/1024))MB" >> $LOGFILE
		fi
		fi
	fi
	[ "$partition_mountpt" = "swap" ] && partition_format="swap"
	[ "$partition_format" = "swap" ] && partition_mountpt="swap"
	if [ "$partition_mountpt" = "" ] ; then
		if [ "`pvdisplay $current_partition 2> /dev/null`" != "" ] || [ "`lvm pvdisplay $current_partition 2> /dev/null`" != "" ] ; then
		if  [ "`fgrep device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
		    partition_mountpt="raid"
		    partition_format="raid"
		else
#		    lvm_dev="`pvdisplay $current_partition | grep -i "VG N" | head -n1 | tr -s ' ' ' ' | cut -d' ' -f3`"
		    partition_mountpt="lvm"
		    partition_format="lvm"
		fi
		fi
	fi
	psz=$partition_size
	echo "Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)" >> $LOGFILE
	[ "$psz" != "lvm" ] && psz=$(($psz/1024))
	if [ "`echo " $IMAGE_DEVS " | fgrep " $current_partition "`" != "" ] ; then
		partition_mountpt="image"
		    old_partition_fmt=$partition_format
#	    partition_format="`$FDISK -l 2>> $LOGFILE | tr -s '\t' ' ' | grep -w "$absolute_partition" | $AWK 'x=$(NF-1}'`"
		partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
		    echo "------- $FDISK -l log ------------" >> $LOGFILE
		    cat $FDISKLOG >> $LOGFILE
		    echo "------- $FDISK log end ------------" >> $LOGFILE
		partition_size=$(($partition_size+1)); # just in case
		    if [ "$partition_format" = "Linux" ] ; then
		        echo "Are you imaging a mounted swap partition? Silly..." >> $LOGFILE
		        echo "Reverting format from $old_partition_fmt to $partition_format" >> $LOGFILE
		        partition_format=$old_partition_fmt
		    fi
	fi
		if [ "$EXCLUDE_DEVS" ] && [ "`echo " $EXCLUDE_DEVS " | fgrep " $current_partition "`" ] || [ "`echo " $EXCLUDE_DEVS " | grep " $current_partition "`" ] ; then
		    echo "Excluding $current_partition from mountlist" >> $LOGFILE
		    continue
		fi
		if [ ! "$partition_mountpt" ] ; then
		for qq in "" `find /dev/ida/c*d* ! -name '*p*'` ; do
		partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
		        echo "------- $FDISK -l $qq log ------------" >> $LOGFILE
		        cat $FDISKLOG >> $LOGFILE
		        echo "------- $FDISK log end ------------" >> $LOGFILE
		[ "$partition_format" ] && break
		done
		if [ "$partition_format" = "Compaq diagnostics" ] ; then
		partition_format="compaq"
		elif [ ! "`fgrep device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
		LogIt "Unable to find mountpoint of $current_partition - ignoring"
		continue
		fi
	fi
	partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
	[ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | awk '{print$5;}'`"; # in case user uses 'auto' (dumb!)
	unofficial_outstring=`printf "\t%-15s %-15s %-15s %7s\n" $current_partition $partition_mountpt $partition_format $psz`
	if [ "$current_partition" = "" ] ; then
		echo "Unknown partition (outstring = $unofficial_outstring)" >> $LOGFILE
	elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
		if [ "`cat /etc/raidtab 2> /dev/null | fgrep device | fgrep $current_partition`" ] ; then
		partition_mountpt=raid
		partition_format=raid
		    printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$redhat_label"
		        printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$redhat_label" >> $mountlist
		else
		echo "Unknown mountpoint (outstring = $unofficial_outstring)" >> $LOGFILE
		fi
		elif [ "$partition_format" = "" ] ; then
		echo "Unknown format (outstring = $unofficial_outstring)" >> $LOGFILE
	elif [ "$partition_size" = "" ] ; then
		echo "Unknown partition size (outstring = $unofficial_outstring)" >> $LOGFILE
	elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
		continue
	else
		    if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
		        echo "Stupid bastard..." >> $LOGFILE
		        partition_format="vfat"
		    fi
		printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$redhat_label"
		printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$redhat_label" >> $mountlist
	fi
	done
}






MakeSureNumberIsInteger() {
	res=`echo "$1" | tr -s '\-[0-9]' ' '`
	if [ "$res" != " " ] && [ "$res" != "" ] ; then
	echo "result = '$res'"
		Die "$1 should be an integer"
	fi
}





MakeSyslinuxMessageFile() {
	mkdir -p $1
	rmdir $1
	echo -en "  " > $1
	if [ "`cat /etc/issue.net 2> /dev/null | fgrep -i "debian"`" ] ; then
		cat $MINDI_LIB/msg-txt | sed s/ZZZZZ/$MINDI_VERSION/ | sed s/YYYYY/"Mondo Rescue"/ | sed s/XXXXX/"a cousin of"/ | sed s%DDDDD%"Debian GNU\/`uname -s` `cat /etc/issue.net | cut -d ' ' -f 3` `hostname`"% | sed s/KKKKK/"Kernel `uname  -r` on a `uname -m`"/ | sed s/TTTTT/"`LC_TIME=C date`"/ >> $1.tmp
	else
		cat $MINDI_LIB/msg-txt | sed s/ZZZZZ/$MINDI_VERSION/ | sed s/YYYYY/"Mondo Rescue"/ | sed s/XXXXX/"a cousin of"/ | sed s/DDDDD/"`cat /etc/issue.net | grep -i "linux" | head -n1 | tr -s ' ' ' '`"/ | sed s/KKKKK/"`cat /etc/issue.net | grep -i "kernel" | head -n1 | tr -s ' ' ' '`"/ | sed s/TTTTT/"`LC_TIME=C date`"/ | sed s/' '\\r' 'on' 'an' '\/' '`uname -r`' 'on' 'an' '`uname -m`/ >> $1.tmp
	fi
	cat $1.tmp | sed s/%r/"`uname -r`"/ | sed s/%t/"`hostname`"/ > $1
	rm -f $1.tmp
	if [ "$CDRECOVERY" != "yes" ] ; then
		if [ -e "$MONDO_TMP/start-nfs" ] ; then
		    echo -en "Press <enter> to continue.\n" >> $1
		elif [ ! "$MONDO_TMP" ] ; then
		    echo -en "FYI, this is _not_ a Mondo Rescue CD.\n" >> $1
		    if [ -e "$MINDI_LIB/memtest.img" ] ; then
		        echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n" >> $1
		    fi
		else
		    echo -en "$BOOT_MEDIA_MESSAGE" >> $1
		fi
	else
		echo -en " \
To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n" >> $1
	fi
}




MoveHyperlinkSensibly() {
	local filename minidir_root resides_on_diskno noof_disks old_diskno d old_pwd
	filename=$1
	minidir_root=$2
	resides_on_diskno=$3
	noof_disks=$4

	[ -h "$minidir_root/$resides_on_diskno/$filename" ] || Die "$filename isn't a softlink (or doesn't exist): how can I move it sensibly?"

	old_diskno=$resides_on_diskno
	d=1
	while [ "$d" -le "$noof_disks" ] ; do
		if [ "$d" -ne "$old_diskno" ] ; then
		    old_pwd=`pwd`
		    cd $minidir_root/$old_diskno
		    cp --parents -Rdf $filename $minidir_root/$d/ || Die "Can't move $filename (sensibly) from $old_diskno to $d"
		    rm -f $filename
		    cd $old_pwd
		fi
# when the softlink is resolvable, our work here is done
		[ -e "$minidir_root/$d/$filename" ] && return 0
		old_diskno=$d
		d=$(($d+1))
	done
	return 1
}



OfferToCopyImagesToDisks() {
	local imagesdir i imagename dev count boot_dev data_dev
	imagesdir=$1
	boot_dev=$2
	data_dev=$3
	echo -en "Would you like to create boot+data floppy disks now (y/n) ?"
	read i
	[ "$i" != "y" ] && [ "$i" != "Y" ] && return
	mount | fgrep /dev/fd > /dev/null && Die "Please unmount your floppies first."
	echo "WARNING! THIS WILL ERASE YOUR FLOPPY DISKS."
	[ ! -e "$boot_dev" ] && Die "Cannot find $boot_dev - is your Linux distro broken?"
	[ ! -e "$data_dev" ] && Die "Cannot find $data_dev - is your Linux distro broken?"
	i=`find $imagesdir -type f | fgrep "/mindi-root.1" 2> /dev/null`
	j=`find $imagesdir -type f | fgrep "/mindi-boot" | fgrep -v 2880`
#    echo "i=$i"
#    echo "j=$j"
	if [ "$i" ] ; then
		CopyImageToDisk $j $data_dev "boot disk"
		CopyImageToDisk $i $data_dev "root disk"
	else
		CopyImageToDisk $j $boot_dev "boot/root disk"
	fi
	count=1
	for i in `find $imagesdir | fgrep mindi-data` ; do
		CopyImageToDisk $i $data_dev "data disk #$count"
		count=$(($count+1))
	done
}



OfferToMakeBootableISO() {
	local i old_pwd
	if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ ! "`DidMondoCallMe`" ] ; then
		echo -en "Shall I make a bootable CD image? (y/n) "
		read i
		[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	fi
	if [ ! "$MONDO_TMP" ] ; then
		LogIt "NB: Mindi's bootable CD always uses isolinux."
		LogIt "For a bootable CD w/LILO, please use Mondo."
	fi
	rm -Rf $TMP_ROOT/iso
	mkdir -p $TMP_ROOT/iso/{images,archives,isolinux}
	cp -f $1/*.img $1/*.gz $TMP_ROOT/iso/images || LogIt "OfferToMakeBootableISO: Cannot copy $i to $TMP_ROOT/iso/images\n"
	old_pwd=`pwd`
	cd $TMP_ROOT/iso
	mkdir -p $MONDO_ROOT/iso/isolinux
	echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
	cp $MINDI_LIB/mem{test,disk}* $MONDO_ROOT 2>> $LOGFILE
	for i in memdisk memtest.bin memtest.img ; do
	j=$MINDI_LIB/$i
	k=$TMP_ROOT/iso/isolinux
	if [ -e "$j" ] ; then
		LogIt "Copying $j to $k"
		cp -f $j $k || Die "Failed to copy $j to $k"
		cp -f $j $TMP_ROOT || Die "Failed to copy $j to $k"
	fi
	done
	MakeSyslinuxMessageFile $TMP_ROOT/iso/isolinux/message.txt
	cp $kernelpath $TMP_ROOT/iso/isolinux/vmlinuz || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/isolinux/vmlinuz). Did you run out of disk space?"
	cp $TMP_ROOT/mindi.rdz $TMP_ROOT/iso/isolinux/initrd.img
	cp $TMP_ROOT/mindi.rdz $imagesdir/initrd.img
	[ -e "$iso_cfg_file" ] || Die "FIXME - unable to find $iso_cfg_file - this should never occur"
	cd $TMP_ROOT/iso/isolinux
	cat $iso_cfg_file | HackSyslinuxFile $ramdisk_size $TMP_ROOT/iso > isolinux.cfg || Die "Cannot copy isolinux.cfg from mindi_home to tmp_root - did you run out of disk space?"
	if [ -e "$MONDO_TMP/start-nfs" ] ; then
	mv isolinux.cfg isolinux.cfg.old
	cat isolinux.cfg.old | sed s/interactive/iso/ > isolinux.cfg
	fi
	if [ "$ARCH" != "ia64" ] ; then
		cp $ISOLINUX isolinux.bin || Die "Cannot copy isolinux.bin ($ISOLINUX) to tmp_root - did you run out of disk space?"
	cp $ISOLINUX ../
	fi
	cd $TMP_ROOT/iso
	if [ "$ARCH" != "ia64" ] ; then
		cp -f $TMP_ROOT/iso/isolinux/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt} $MONDO_ROOT || Die "Cannot copy core files to ramdisk for boot disk. Did you run out of disk space?"
	fi
	[ "$MONDO_HOME" ] && cp -f $MONDO_HOME/autorun .   
	if [ -d "/home/MondoCD" ] ; then
	cp -pRdu /home/MondoCD/* .
	fi
	if [ "$ARCH" != "ia64" ] ; then
		mkisofs -U -J -r -o $imagesdir/mindi.iso -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> /tmp/$$.mk
	else
		mkisofs -J -r -o $imagesdir/mindi.iso -b images/mindi-bootroot.$IA64_BOOT_SIZE.img -c isolinux/boot.cat -no-emul-boot . > /dev/null 2> /tmp/$$.mk
	fi
	if [ "$?" -ne "0" ] ; then
	echo "----------- mkisofs's errors --------------" >> $LOGFILE
	cat /tmp/$$.mk >> $LOGFILE
	echo "mkisofs returned the following errors:-"
	cat /tmp/$$.mk
	LogIt "Failed to create ISO image.\n"
	else
	echo "Created bootable ISO image at $imagesdir/mindi.iso" >> $LOGFILE
	fi
	rm -f /tmp/$$.mk
	cd $old_pwd
}



PluralOrNot() {
	[ "$1" -gt "1" ] && echo -en "s"
}




MakeMessageFile() {
	local disksize
	disksize=$1
	if [ "`cat /etc/issue.net 2> /dev/null | fgrep -i "debian"`" ] ; then
		cat $MINDI_LIB/msg-txt | sed s/ZZZZZ/$MINDI_VERSION/ | sed s/YYYYY/"Mondo Rescue"/ | sed s/XXXXX/"a cousin of"/ | sed s%DDDDD%"Debian GNU\/`uname -s` `cat /etc/issue.net | cut -d ' ' -f 3` `hostname`"% | sed s/KKKKK/"Kernel `uname  -r` on a `uname -m`"/ | sed s/TTTTT/"`LC_TIME=C date`"/
	else
		cat $MINDI_LIB/msg-txt | sed s/ZZZZZ/$MINDI_VERSION/ | sed s/YYYYY/"Mondo Rescue"/ | sed s/XXXXX/"a cousin of"/ | sed s/DDDDD/"`cat /etc/issue.net | grep -i "linux" | head -n1 | tr -s ' ' ' '`"/ | sed s/KKKKK/"`cat /etc/issue.net | grep -i "kernel" | head -n1 | tr -s ' ' ' '`"/ | sed s/TTTTT/"`LC_TIME=C date`"/ | sed s/' 'r' 'on' 'an' 'm/' '`uname -r`' 'on' 'an' '`uname -m`/
	fi
	if [ "$disksize" -gt "2880" ] ; then
	if [ "`DidMondoCallMe`" ] ; then
		if [ "$CDRECOVERY" != "yes" ] ; then
		        if [ -e "$MONDO_TMP/start-nfs" ] ; then
		            echo -en "Press <enter> to continue.\n"
		elif [ ! "$MONDO_TMP" ] ; then
		    echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
		        else
		            echo -en "$BOOT_MEDIA_MESSAGE"
		        fi
		fi
	fi
	fi
	if [ "$CDRECOVERY" = "yes" ] ; then
		echo -en "\
To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
	fi
	echo -en "\n\n\n"
}




write_full_floppy_of_kernel() {
	local mtpt image old_pwd res disksize

	res=0
	old_pwd=`pwd`
	KERN_DISK_MADE=1
	disksize=$3
	rand1=$RANDOM
	rand2=$RANDOM
	image=/tmp/$rand1.$rand2.img
	mtpt=/tmp/$rand1.$rand2.mtpt
	dd if=/dev/zero of=$image bs=1k count=$disksize
	mke2fs -N 26 -F $image > /dev/null
	mkdir -p $mtpt
	mount -o loop $image $mtpt
	cd $mtpt
	mkdir -p {dev,tmp,boot}
	cp -f $1 vmlinuz
	if [ "$?" -ne "0" ] ; then
		LogIt "Failed to copy $1 to ramdisk"
		cd $old_pwd
		umount $mtpt
		rmdir $mtpt
		rm $image
		return 1
	fi

	rdev vmlinuz 2,0
	rdev -R vmlinuz 0
	rdev -r vmlinuz 49152

	tar -zxf $MINDI_LIB/dev.tgz || LogIt "Cannot untar dev.tgz\n"
	losetup /dev/loop0 > /dev/null 2> /dev/null
	[ "$?" -eq "0" ] || losetup /dev/loop0 -d || Die "Please free up /dev/loop0 by typing 'losetup /dev/loop0 -d'.\nReboot if necessary.\n"
	CopyBootBFile $mtpt/boot.b

#    echo "root=/dev/loop0" > bdlilo.conf
	MakeLiloConfFile $disksize >> bdlilo.conf

#    cat bdlilo.conf > /tmp/bdlilo.conf

#    cat /home/mondostuff/bdlc > bdlilo.conf

	chmod 644 bdlilo.conf
	MakeMessageFile $disksize > message
	lilo -v -C bdlilo.conf -r $mtpt
	res=$?

#echo "lilo -v -C bdlilo.conf -r $mtpt"
#echo -en "Press enter"; read line

	cd $old_pwd
	umount $mtpt
	mv -f $image $2
	rmdir $mtpt

	return $res

# --- the kernel-only method NO LONGER WORKS. Not since Apr 2002.
# It should work, according to the Boot Disk HOWTO, but it doesn't.
# It works for my failsafe kernel & for RH7.2 but not RH7.3, 8.0, etc.
# -Hugo, Apr 19th 2004
#	dd if=$1 of=$2 bs=1k &> /dev/null || Die "Cannot dd blank file"
#	dd if=/dev/zero bs=1k count=$3 >> $2 2> /dev/null || Die "Cannot dd blank file"
#	mv -f $2 $2.old
#	dd if=$2.old bs=1k count=$3 of=$2 &> /dev/null || Die "Cannot dd blank file"
#	rm -f $2.old
#	if [ "$3" = "1440" ] ; then
#	    rdev $2 "/dev/fd0H"$3
#	else
#	    rdev $2 "/dev/fd0u"$3
#	fi
#	rdev -R $2 0
#	rdev -r $2 49152
}






MakeLiloConfFile() {
	local disksize options i ooo
	disksize=$1
	options=""
		if [ "$ARCH" != "ia64" ] ; then
		echo -en "boot=/dev/loop0\ndisk=/dev/loop0\n"
		fi
		if [ "$disksize" -eq "2880" ] ; then
		echo -en "bios=0x00\nsectors=36\nheads=2\ncylinders=80\n"
		elif [ "$disksize" -eq "1722" ] ; then
		echo -en "bios=0x00\nsectors=21\nheads=2\ncylinders=82\n"
		elif [ "$disksize" -gt "2880" ] ; then
		    /bin/true
		else
		echo -en "bios=0x00\nsectors=18\nheads=2\ncylinders=80\n"
		fi
		if [ "$ARCH" != "ia64" ] ; then
		    echo -en "install=/boot.b\nmap=/boot.map\n"
		fi
	if [ "$CDRECOVERY" = "yes" ] ; then
		echo -en "default=RESTORE\n"
	elif [ "$disksize" -gt "2880" ] && [ "`DidMondoCallMe`" ] ; then
	if [ -e "$MONDO_TMP/start-nfs" ] ; then
		echo -en "default=iso\n"
	else
		echo -en "default=interactive\n"
	fi
	else
	echo -en "default=expert\n"
	fi
		echo -en "prompt\n"
	if [ "$ARCH" != "ia64" ] ; then
		echo -en "vga=normal\nbackup=/dev/null\nmessage=/message\n"
	fi
	if [ "$CDRECOVERY" != "yes" ] ; then
	echo -en "timeout=300\n"
	fi
	echo -en "\n"
	if [ "$CDRECOVERY" = "yes" ] ; then
	options="RESTORE expert"
	elif [ "$disksize" -gt "2880" ] ; then
		if [ "`DidMondoCallMe`" ] ; then
		    if [ -e "$MONDO_TMP/start-nfs" ] ; then
		        options="iso"
		    else
		        options="interactive expert compare iso nuke isonuke"
# hda hdb hdc hdd"
		    fi
		else
		    options="expert"
	fi
	else
	options="expert"
	fi
	for i in $options ; do
	ooo=$i
	[ "$ooo" = "RESTORE" ] && ooo="nuke"
		if [ "$ARCH" = "ia64" ] ; then
		rootpart="root=/dev/ram0\n\t"
	else
		rootpart=""
	fi
	outstr="image=vmlinuz\n\tlabel=$i\n\tinitrd=/mindi.rdz\n\t${rootpart}append=\" rw ramdisk=$ramdisksize ramdisk_size=$ramdisksize maxcpus=1 $ooo_mode $ADDITIONAL_BOOT_PARAMS"
	
	outstr=$outstr" $ooo_mode"
	outstr=$outstr"\"\n"
	if [ "$disksize" = "1440" ] ; then
		echo -en "$outstr" | sed s/initrd=.*// | grep -v root=
	else
		echo -en "$outstr"
	fi
	done
}




PrepareBootDiskImage_LILO() {
	local disksize imagesdir dev imagefile mountpoint fname i kernelpath ramdisksize cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
	imagesdir=$1
	disksize=$2
	kernelpath=$3
	ramdisksize=$4

	retval=0
	[ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
	echo -en "Making "$disksize"KB boot disk..."
	TurnTgzIntoRdz $MINDI_LIB/rootfs $TMP_ROOT/mindi.rdz $ramdisksize $disksize `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into mindi.rdz; are you SURE your kernel supports loopfs?"
	if [ "$ARCH" != "ia64" ] ; then
		[ "$disksize" != "1722" ] && [ "$disksize" != "2880" ] && [ "$disksize" != "5760" ] && Die "PDBI - disksize is $disksize - bad size"
	fi
	echo -en "..."
	imagefile=$imagesdir/mindi-bootroot.$disksize.img
	mountpoint=$TMP_ROOT/mountpoint.$$
	mkdir -p $mountpoint
	dd if=/dev/zero of=$imagefile bs=1k count=$disksize &> /dev/null || Die "Cannot dd blank file"
	if [ "$ARCH" = "ia64" ] ; then
		mkdosfs $imagefile > /tmp/mke2fs.$$ 2>> /tmp/mke2fs.$$
	t=vfat
	else
		mke2fs -N 26 -m 0 -F $imagefile > /tmp/mke2fs.$$ 2>> /tmp/mke2fs.$$
	t=ext2
	fi
	[ "$?" -ne "0" ] && cat /tmp/mke2fs.$$
	rm -f /tmp/mke2fs.$$
	mount -t $t -o loop $imagefile $mountpoint || LogIt "Cannot mount (PBDI)\n\n"
# copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
	mkdir -p $mountpoint/etc
	if [ "$ARCH" != "ia64" ] ; then
		liloconf=$mountpoint/etc/lilo.conf
	else
	liloconf=$mountpoint/elilo.conf
	fi
	old_pwd=`pwd`
	cd $mountpoint
	if [ "$ARCH" != "ia64" ] ; then
		tar -zxf $MINDI_LIB/dev.tgz || LogIt "Cannot untar dev.tgz\n"
	fi
	cd $old_pwd
	losetup /dev/loop0 > /dev/null 2> /dev/null
	[ "$?" -eq "0" ] || losetup /dev/loop0 -d || Die "Please free up /dev/loop0 by typing   'losetup /dev/loop0 -d'.\nReboot if necessary.\n"
	CopyBootBFile $mountpoint/boot.b

	MakeLiloConfFile $disksize > $liloconf

	echo "Copying $TMP_ROOT/mindi.rdz to $mountpoint..." >> $LOGFILE
	cp -f $TMP_ROOT/mindi.rdz $mountpoint 2>> $LOGFILE
	if [ "$?" -ne "0" ] ; then
	LogIt "Failed to copy $TMP_ROOT/mindi.rdz to $mountpoint\n"
	cat $TMP_ROOT/mtpt.$$ >> $LOGFILE
	LogIt "Please unload some of your modules and try again.\n"
	rm -f $TMP_ROOT/mtpt.$$
	LogIt "Cannot incorporate mindi.rdz in bootdisk (kernel / modules too big?)"
		retval=$(($retval+1))
	fi
	MakeMessageFile $disksize > $mountpoint/message

	mkdir -p $mountpoint/tmp
	cp -f $TMP_ROOT/mondo-restore.cfg $mountpoint/tmp &> /dev/null
	if [ -e "$MINDI_LIB/memtest.img" ] ; then
		echo -en "image=/memtest.bin\nlabel=memtest\nn" >> $liloconf
		echo -en "image=/memdisk\nlabel=memtest\nappend=\"initrd=memtest.img\"\n" >> $liloconf
#        echo "Yep, this is a multi-function CD" > $mountpoint/MULTIFUNC
	fi
	if [ -d "/home/MondoCD" ] ; then
	cp -pRdu /home/MondoCD/* . || Die "Cannot do kung pow"
	fi

# copy the kernel across
	rm -Rf $mountpoint/lost+found
	dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
	free_space=`df -k $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
	cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2> /dev/null
	if [ "$?" -ne "0" ] || [ "$FORCE_DUAL_FLOPPIES" = "yes" ] ; then
	echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
	du -sk $mountpoint/* >> $LOGFILE
	echo "--- end of list of files ---" >> $LOGFILE
	echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n\
Sorry, your kernel is too big for a boot/root floppy.\nI'll try the new boot/root two-disk thingy.\n" >> $LOGFILE
		rm -f $mountpoint/vmlinuz
	cd $old_pwd
		umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
		rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)\n"
#	losetup /dev/loop0 -d
	res=0
		write_full_floppy_of_kernel $kernelpath $imagesdir/mindi-boot.1440.img 1440
	res=$(($res+$?))
		cp -f $TMP_ROOT/mindi.rdz $imagesdir/mindi-root.1440.img
	res=$(($res+$?))
	rm -f $imagefile
	[ "$res" -ne "0" ] && LogIt "Warning - failed to create 1.44MB boot/root floppies"
	rm -f $imagesdir/mindi-*.1440.img
	return $res
	fi
	free_space=`df -k $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
	max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
	echo "Free space left on floppy = $free_space KB" >> $LOGFILE
	echo "Max kernel size on $disksize KB floppy (est'd) = $max_kernel_size K" >> $LOGFILE
# make it bootable
	rm -f $mountpoint/zero
	[ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint
	if [ "$disksize" -gt "2880" ] && [ ! "$KERN_DISK_MADE" ] ; then
		if [ "$ARCH" != "ia64" ] ; then
		$LILO_EXE $LILO_OPTIONS -r $mountpoint >> $LOGFILE 2>> $LOGFILE
		else
		    /bin/true
		fi
	elif [ ! "$KERN_DISK_MADE" ] ; then
# 12/28/2001 - if 1.72MB floppy then don't use LILO's optimizations at all
	$LILO_EXE -r $mountpoint >> $LOGFILE 2>> $LOGFILE
	else
	echo "Not running LILO. It's not that kind of disk." >> $LOGFILE
	fi
	if [ $? -ne "0" ] ; then
	if [ "`cat $LOGFILE | fgrep "/tmp/dev.0"`" ] ; then
		LogIt "The '/tmp/dev.0' error is NOT Mindi's fault. It is LILO's.\n"
		LogIt "Please reboot your PC as a workaround.\n"
		Die "LILO sneezed and Mindi caught a cold. Please read the README / FAQ.\n"
	fi
	echo "$LILO_EXE -r $mountpoint ...failed."
	echo -en "Press ENTER to continue."; read line
	LogIt "Cannot run lilo on $mountpoint\nPlease upgrade/downgrade your version of LILO. It has a bug.\n"
	retval=$(($retval+1))
	fi
	cp -f $liloconf /tmp/lilo.conf
	if [ "$ARCH" = "ia64" ] ; then
		cp `dirname $kernelpath`/*.efi $mountpoint
	fi
	umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
	echo -en "..."
	rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)\n"
	if [ "$retval" -eq "0" ] ; then
		echo -en "...$DONE\r"
		if [ "$KERN_DISK_MADE" ] ; then
			LogIt "... $disksize KB boot disks were created OK\r"
		fi
	else
		echo -en "...failed\r"
		LogIt $disksize"KB boot disk was NOT created\r"
		rm -f $imagefile
	fi
	[ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero\n"
	return $retval
}




PrepareBootDiskImage_SYSLINUX() {
	local disksize imagesdir dev imagefile mountpoint fname i kernelpath ramdisksize cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage
	imagesdir=$1
	disksize=$2
	kernelpath=$3
	ramdisksize=$4
	do_boot_root_thingy=""
	local retval old_pwd
	retval=0
	[ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
	echo -en "Making "$disksize"KB boot disk..."
	TurnTgzIntoRdz $MINDI_LIB/rootfs $TMP_ROOT/mindi.rdz $ramdisksize $disksize `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into mindi.rdz; are you SURE your kernel supports loopfs?"
	[ "$disksize" != "1722" ] && [ "$disksize" != "2880" ] && [ "$disksize" != "5760" ] && Die "PDBI - disksize is $disksize - bad size"
	echo -en "..."
	imagefile=$imagesdir/mindi-bootroot.$disksize.img
	mountpoint=$TMP_ROOT/mountpoint.$$
	mkdir -p $mountpoint
# If I format a 1722KB data file & run syslinux on it, the resultant image
# won't boot. So, I have formatted a floppy, called syslinux on/to it, and
# used 'dd' to copy it to sys-disk.raw (zipped to sys-disk.raw.gz).
# If I extract it, mount it, copy my files to it, etc. then the resultant
# image _is_ bootable. I don't know why syslinux and/or mkfs.vfat won't
# play nicely and I don't care. :) I have worked around the problem. -Hugo, 06/27/2002
	if [ "$disksize" = "1722" ] ; then
		gzip -dc $MINDI_LIB/sys-disk.raw.gz > $imagefile || Die "Cannot dd blank file"
	else
		dd if=/dev/zero of=$imagefile bs=1k count=$disksize &> /dev/null || Die "Cannot dd blank file"
		mkfs.vfat $imagefile
		syslinux $imagefile
	fi
	mount -t vfat -o loop $imagefile $mountpoint || LogIt "Cannot mount (PBDI)\n\n"
# copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
	old_pwd=`pwd`
	MakeSyslinuxMessageFile $mountpoint/message.txt
	cd $mountpoint
	[ -e "$sys_cfg_file" ] || Die "Obi Wan, word up?"
#    tar -zxf $MINDI_LIB/dev.tgz || LogIt "Cannot untar dev.tgz\n" <--- present for LILO; is it nec. for SYSLINUX too?
	cat $sys_cfg_file | HackSyslinuxFile $ramdisk_size $mountpoint > syslinux.cfg || Die "Cannot copy syslinux.cfg from mindi_home to tmp_root"
	if [ -e "$MONDO_TMP/start-nfs" ] ; then
	mv syslinux.cfg syslinux.cfg.orig
	cat syslinux.cfg.orig | sed s/interactive/iso/ > syslinux.cfg
	fi
	cd $old_pwd
	echo "Copying $TMP_ROOT/mindi.rdz to $mountpoint/initrd.img..." >> $LOGFILE
	cp -f $TMP_ROOT/mindi.rdz $mountpoint/initrd.img 2>> $LOGFILE
	if [ "$?" -ne "0" ] ; then
	LogIt "Failed to copy $TMP_ROOT/mindi.rdz to $mountpoint\n"
	cat $TMP_ROOT/mtpt.$$ >> $LOGFILE
	LogIt "Please unload some of your modules and try again.\n"
	rm -f $TMP_ROOT/mtpt.$$
	LogIt "Cannot incorporate mindi.rdz in bootdisk (kernel / modules too big?)"
		retval=$(($retval+1))
	fi

	mkdir -p $mountpoint/tmp
	cp -f $TMP_ROOT/mondo-restore.cfg $mountpoint/tmp &> /dev/null

# copy the kernel across
	rm -Rf $mountpoint/lost+found
	dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
	free_space=`df -k $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
	cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
	if [ "$?" -ne "0" ] || [ "$FORCE_DUAL_FLOPPIES" = "yes" ] ; then
	echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
	du -sk $mountpoint/* >> $LOGFILE
	echo "--- end of list of files ---" >> $LOGFILE
	echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n\
Sorry, your kernel is too big for a boot/root floppy.\nI'll try the new boot/root two-disk thingy.\n" >> $LOGFILE
		rm -f $mountpoint/vmlinuz
	cd $old_pwd
		umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
		rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)\n"
#	losetup /dev/loop0 -d

		res=0
		write_full_floppy_of_kernel $kernelpath $imagesdir/mindi-boot.1440.img 1440
		res=$(($res+$?))
		cp -f $TMP_ROOT/mindi.rdz $imagesdir/mindi-root.1440.img
		res=$(($res+$?))
		rm -f $imagefile
		[ "$res" -ne "0" ] && LogIt "Warning - failed to create 1.44MB boot/root floppies"
		return $res
	fi
	free_space=`df -k $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
	max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
	echo "Free space left on floppy = $free_space KB" >> $LOGFILE
	echo "Max kernel size on $disksize KB floppy (est'd) = $max_kernel_size K" >> $LOGFILE
# make it bootable
	rm -f $mountpoint/zero
	mkdir -p $mountpoint/etc
	[ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint
	umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
	echo -en "..."
	rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)\n"

	if [ "$retval" -eq "0" ] ; then
		echo -en "...$DONE\r"
		if [ "$KERN_DISK_MADE" ] ; then
		    rm -f $imagefile
		    LogIt "... $disksize KB boot disks were created OK\r"
		fi
	else
		echo -en "...failed\r"
		LogIt $disksize"KB boot disk was NOT created\r"
		rm -f $imagefile
	fi
	[ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero\n"
	return $retval
}




PrepareDataDiskImages() {
	local needlist bigdir minidir_root tardir diskdir imagesdir res i j k old_pwd lines

	imagesdir=$1
	rm -f $imagesdir/mindi-*.img $imagesdir/[0-9]*.tar.gz $imagesdir/mindi.iso
	needlist=$TMP_ROOT/what-we-need.txt
	bigdir=$TMP_ROOT/bigdir
	minidir_root=$TMP_ROOT/minidir
	mkdir -p $minidir_root
	mkdir -p $bigdir/usr/bin
	tardir=$TMP_ROOT/tardir

	lines=`cat $MINDI_CONF/deplist.txt | grep -vx " *#.*" | grep -vx "" |wc -l`
	cat $MINDI_CONF/deplist.txt | GenerateGiantDependencyList $needlist $lines
	res=$?
	if [ "$YOUR_KERNEL_SUCKS" ]; then
	pwd=`pwd`
	cd $TMP_ROOT
		for i in `ListKernelModulePaths | HackPathsToFailsafe` ; do
		cp --parents -pRdf ./$i $bigdir || Die "PDDI can't cp $i->$bigdir"
		if [ "`du -sk $i | cut -f1`" -lt "$(($CHOPSIZE*2))" ] ; then
		cp --parents -pRdf $i $bigdir
		else
		ChopUpAndCopyFile $i $bigdir $CHOPSIZE $BIGNO
		BIGNO=$(($BIGNO+1))
		fi
	done
	for i in $EXTRA_MODS ; do
		j=`find lib/modules/$FAILSAFE_KVER -name $i.*o 2> /dev/null`
		[ ! "$j" ] && echo "Warning - cannot find failsafe module $i.o" >> $LOGFILE
		for k in $j ; do
		if [ "`du -sk $k | cut -f1`" -lt "$CHOPSIZE" ] ; then
		    cp --parents -pRdf $k $bigdir
		else
		    ChopUpAndCopyFile $k $bigdir $CHOPSIZE $BIGNO
		    BIGNO=$(($BIGNO+1))
		fi
		echo "Added failsafe module $k to ramdisk" >> $LOGFILE
		done
	done
	cd $pwd
	else
	ListKernelModulePaths >> $needlist
	fi
	if [ "$res" -ne "0" ] ; then
		Die "You have $res file`PluralOrNot $res` present in dependency list\nbut absent from filesystem."
	fi
	FindAndAddUserKeyboardMappingFile
	mkdir -p $bigdir/tmp
	if [ "`DidMondoCallMe`" ] ; then
		MakeMondoConfigFile $TMP_ROOT/mondo-restore.cfg
		cp -f $TMP_ROOT/mondo-restore.cfg $bigdir/tmp &> /dev/null
		cp -f $TMP_ROOT/mondo-restore.cfg $CACHE_LOC &> /dev/null
	fi
	[ -d "/mnt/.boot.d" ] && echo "Oh Jebus" > $bigdir/tmp/DUMBASS-GENTOO
	DropOptimizedLibraries $needlist $bigdir
	echo -en "Assembling dependency files"
	CopyDependenciesToDirectory < $needlist $bigdir

# also copy io.sys and msdos.sys, if we can find them
	for i in `mount | cut -d' ' -f3` ; do
	for j in io.sys msdos.sys ; do
		[ -e "$i/$j" ] && cp -f $i/$j $bigdir
	done
	done

# master boot record, too
	i=`cat $MONDO_TMP/BOOTLOADER.DEVICE 2> /dev/null`
	if [ "$i" ] ; then
	LogIt "Backing up $i's MBR"
	dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
# < < E O F
	sleep 1
	sync
#        [ "$?" -ne "0" ] && echo "Failed to save $i's MBR to bigdir" >> $LOGFILE
	j=$i
	[ -h "$j" ] && j=`ResolveSoftlink $j`
	LogIt "Creating /dev/boot_device ($j)"
	mkdir -p $bigdir/dev
	cp -pRdf $j $bigdir/dev/boot_device || Die "Unable to create /dev/boot_device on ramdisk"
	fi

# more stuff
#    cp -f $MINDI_LIB/embleer* $bigdir
	old_pwd=`pwd`
	cd $bigdir

	[ -e "$MINDI_LIB/aux-tools" ] || Die "aux-tools not found in Mindi's home dir. Do you have multiple copies of Mindi lying around? Please delete them. No, don't e-mail me and ask how. ;) Use 'rm'."
	cp -Rdf $MINDI_LIB/aux-tools/* . 2>> $LOGFILE || LogIt "Warning - error occurred while unzipping aux-tools\n"
	if [ -e "$MINDI_LIB/x11-tools.tgz" ] ; then
	tar -zxf $MINDI_LIB/x11-tools.tgz 2>> $LOGFILE || LogIt "Warning - error occurred while unzipping x11-tools.tgz\n"
	fi
	if [ -e "$MONDO_HOME/restore-scripts" ] ; then
		cp -Rdf $MONDO_HOME/restore-scripts/* . 2>> $LOGFILE
		[ "$?" -ne "0" ] && [ "`DidMondoCallMe`" ] && Die "Cannot find/install $MONDO_HOME/restore-scripts"
	fi
	[ -d "/lib/dev-state" ] && cp --parents -pRdf /lib/dev-state .
	cd $old_pwd
	echo -e "$DONE"
	TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
	SplitDirectoryIntoMinidirs $bigdir $minidir_root
	noof_disks=$?
	[ "$noof_disks" -eq "0" ] && Die "Too much stuff!"
#    if [ "$noof_disks" -ge "8" ] ; then
#        LogIt "You are putting a ludicrously large amount of data on these disks."
#        LogIt "I shall therefore double EXTRA_SPACE, just in case your ramdisk is too small."
#        EXTRA_SPACE=$(($EXTRA_SPACE*2))
#    fi
	MakeMountlist $TMP_ROOT/mountlist.txt
	mkdir -p $minidir_root/$noof_disks/tmp
	cp -f $TMP_ROOT/mountlist.txt $minidir_root/$noof_disks/tmp/mountlist.txt || Die "Cannot copy mountlist.txt from $TMP_ROOT to data disk"
	cp -f $TMP_ROOT/mountlist.txt $CACHE_LOC
	[ "`DidMondoCallMe`" ] && cp -f $minidir_root/$noof_disks/tmp/mountlist.txt $MONDO_TMP/.
	[ -d "/proc/lvm" ] && $MINDI_SBIN/analyze-my-lvm > $minidir_root/$noof_disks/tmp/i-want-my-lvm
	[ -d "/dev/mapper" ] && $MINDI_SBIN/analyze-my-lvm > $minidir_root/$noof_disks/tmp/i-want-my-lvm
	cat $minidir_root/$noof_disks/tmp/mountlist.txt >> $LOGFILE
	ZipMinidirsIntoTarballs $minidir_root $tardir $noof_disks
	CreateDataDiskImagesFromTarballs $tardir $imagesdir $noof_disks
	FRIENDLY_OUTSTRING="Boot and data disk images were created."
# One 1.72MB boot disk, one 2.88MB boot disk and $noof_disks data disk images
	rmdir $tardir $bigdir
	rm -f $needlist
	return $noof_disks
}


ProcessLDD() {
	local main_fname incoming j i fname f newf
	main_fname=$1
	read incoming
	while [ "$incoming" != "" ] ; do
		incoming=`echo "$incoming" | sed '/[[:blank:]]*.*[[:blank:]]*=>[[:blank:]]*(.*/d ; s/[[:blank:]]*\(.*\)[[:blank:]]*=>[[:blank:]]*\/.*/\1/ ; s/[[:blank:]]*\(\/.*\)[[:blank:]]*(.*/\1/'`
		for fname in `echo "$incoming"` ; do
		    fname=`LocateFile $fname`
		    for f in $fname ; do
		        [ -e "$f" ] && echo $f
		    done
		done
		read incoming
	done
}



Prompt() {
	echo -en "$1"
	read line
}



ReadLine() {
	local i incoming
	read incoming
	i=0
	while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
	i=$(($i+1))
	read incoming
	done
	echo "$incoming"
}



RejigHyperlinks() {
	local minidir_root noof_disks fname path diskno old_pwd awk_loc gawk_loc dir i
	minidir_root=$1
	noof_disks=$2

	old_pwd=`pwd`
	diskno=1
	while [ "$diskno" -le "$noof_disks" ] ; do
	mkdir -p $minidir_root/$diskno
		cd $minidir_root/$diskno
		for fname in `find -type d -o -print` ; do
		    [ -h "$minidir_root/$diskno/$fname" ] && MoveHyperlinkSensibly $fname $minidir_root $diskno $noof_disks
		done
	diskno=$(($diskno+1))
	done


	cd $old_pwd
	return



# do some awk/gawk stuff
	cd $minidir_root
	awk_loc=`find -name awk`
	gawk_loc=`find -name gawk`
	if [ "$awk_loc" = "" ] && [ "$gawk_loc" != "" ] ; then
		for i in $gawk_loc ; do HackAwk $i gawk ; done
	elif [ "$gawk_loc" = "" ] && [ "$awk_loc" != "" ] ; then
		for i in $awk_loc ; do HackAwk $i awk ; done
	elif [ "$gawk_loc" != "" ] && [ "$awk_loc" != "" ] ; then
		echo -en "Gawk/awk found. Good.\r"
	else
		Die "Look, I don't want to come across as having an attitude, but you need either awk or gawk. Get a distro that doesn't suck, okay? :-)"
	fi
	cd $old_pwd
}



EliminateRelatives() {
# eliminate /../../..... from path string
	local orig i old_i newo
	newo=$1
	while [ "`echo "$newo" | grep "\.\."`" ] ; do
		orig="`echo "$newo" | tr -s '/' '/'`"
#        echo "orig=$orig"
		newo="/"
		old_i=""
		for i in `echo "$orig" | tr '/' ' '` ; do
		    if [ ! "$old_i" ] ; then
		        old_i=$i
		        continue
		    fi
		    if [ "$old_i" ] && [ "$i" = ".." ] ; then
		        if [ "$old_i" = ".." ] ; then
		            newo="$newo"$old_i/
#                    echo "two --- $old_i $i"
		            old_i="$i"
		            continue
#                else
#                    echo "swallowing ($old_i $i)"
		        fi
		    elif [ "$old_i" != ".." ] ; then
		        newo="$newo"$old_i/
		    fi
		    old_i=$i
		done
		newo="$newo"$i
	done
	echo "$newo"
}


WhatSoftlinkPointsTo() {
	local orig new resolved
		orig=$1
		new=`ls -l $orig | tr -s ' ' '\t' | $AWK '{printf $NF;}'`
		if [ "`echo "$new" | cut -d'/' -f1`" ] ; then
		    resolved=`dirname $orig`/$new
		else
		    resolved=$new
		fi
	EliminateRelatives $resolved
}





ReplaceIndividualLine() {
	local orig_file new_file lino newstring lines_total lines_remaining
	orig_file=$1.orig
	mv -f $1 $orig_file || Die "Cannot move $1 to $orig_file"
	new_file=$1
	lino=$2
	newstring="$3"
	if [ "$lino" = "" ] || [ "$lino" -lt "1" ] ; then
	echo "Can't find string" >> $LOGFILE
	return 1
	fi
	lines_total=`wc -l $orig_file | gawk '{print $1;}'`
	lines_remaining=$(($lines_total-$lino))
	head -n$(($lino-1)) $orig_file > $new_file
	echo "$newstring" >> $new_file
	echo "# The above line was added by Mindi, at the user's instruction" >> $new_file
	tail -n$lines_remaining $orig_file >> $new_file
	echo "Replace line $lino of $new_file with user-specified line, '$newstring'" >> $LOGFILE
#    cp -f $new_file /tmp/init.new
	[ -x "$orig_file" ] && chmod +x $new_file
	rm -f $orig_file
	return 0
}




ResolveSoftlink() {
	local resolved new
	resolved=$1
	while [ -h "$resolved" ] ; do
		resolved=`WhatSoftlinkPointsTo $resolved`
	done
	echo "$resolved"
}




ScanCDandTape() {
	local i

	for i in /dev/st0 /dev/ht0 /dev/cdrom /dev/cdrom0 /dev/cdrom 1 ; do
		dd if=$i of=/dev/null bs=64k count=1 &> /dev/null
	done
}



SizeOfPartition() {
	local devpath drive res stub
	device=$1
	if [ "`echo "$device" | fgrep "/dev/md"`" != "" ] ; then
	res=`SizeOfRaidPartition $device`
	[ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
	echo "$res"
	return 0
	fi
#    res=`$FDISK -l 2>> $LOGFILE | grep -w "$device" | head -n1 | sort -u | tr '*' ' ' | tr -s '\t' '|' | tr -s ' ' ' ' | cut -d' ' -f4 | sed s/+// | sed s/-//`
# patch from Bill <bill@iwizard.biz> - 2003/08/25
	res=`$FDISK -s $device`
	echo "------- $FDISK -l $device log ------------" >> $LOGFILE
	cat $FDISKLOG >> $LOGFILE
	echo "------- $FDISK log end ------------" >> $LOGFILE
# end patch
	[ "$res" = "" ] && res=`df -k -x supermount | tr -s '\t' ' ' | fgrep "$device " | cut -d' ' -f2`
	[ "$res" = "" ] && res="-1"
	echo $res
	return 0
}


SizeOfRaidPartition() {
	local real_dev smallest_size silly tmp

	silly=999999999
	smallest_size=$silly

	for real_dev in `GetRaidDevMembers $1` ; do
	tmp=`SizeOfPartition $real_dev`
	[ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
	done

	if [ "$smallest_size" = "$silly" ] ; then
	echo "-1"
	return 1
	else
	echo "$smallest_size"
	return 0
	fi
}






StripComments()
{
	local tempfile
	tempfile=$TMP_ROOT/$$.strip.txt
	cp -f $1 $tempfile
	cat $tempfile | $AWK '{if (substr($0,0,1)!="#" || substr($0,0,3)=="#!/") {print $0;};}' > $1
	rm -f $tempfile
	echo "Stripped comments from $2" >> $LOGFILE
}






SplitDirectoryIntoMinidirs() {
	local bigdir minidir_root i noof_disks old_pwd res
	bigdir=$1
	minidir_root=$2
	rm -Rf $minidir_root/*

	TryToFitDataIntoSeveralDirs $bigdir $minidir_root
	noof_disks=$?
	if [ "$noof_disks" -eq "0" ] ; then
	echo "Failed to fit data into several dirs."
		return 0
	fi
	RejigHyperlinks $minidir_root $noof_disks
	rm -Rf $bigdir/*
   return $noof_disks
}



StripExecutable()
{
	local tmpfile
	tmpfile=$TMP_ROOT/stripped.$$.dat
	[ -d "$1" ] || [ -h "$1" ] && return
	cp -f $1 $tmpfile
	strip $tmpfile 2> /dev/null
	if [ "$?" -eq "0" ] ; then
	cp -f $tmpfile $1
	echo "Stripped binary $2" >> $LOGFILE
	fi
	rm -f $tmpfile
}


TemporarilyCompressAllFiles() {
	local i orig_fname out_fname out_list

	i=0
	out_list=$2/compressed/compressed.txt
	mkdir -p $2/compressed
	> $out_list
	for orig_fname in $1 ; do
		out_fname=$2/compressed/$orig_fname.gz
		mkdir -p $out_fname 2> /dev/null
		rmdir $out_fname 2> /dev/null
		gzip -c6 $orig_fname > $out_fname 2> /dev/null
		i=$(((($i+1))%15))
		[ "$i" -eq "0" ] && echo -en "."
		du -sk $out_fname >> $out_list
	done
}



TryToFindKernelPath() {
	local fname incoming res fkern_ver we_want_version possible_kernels noof_kernels kernelpath kdate duff_kernels
	we_want_version=`uname -r`
	possible_kernels=""
	duff_kernels=""
   
	if [ "$ARCH" = "ia64" ] ; then
	   root="/boot/efi/efi"
	else
	   root="/"
	fi
	for fname in `find $root -maxdepth 2 -type f | fgrep lin | fgrep -v /proc/` ; do
	[ ! -e "$fname" ] && continue
		[ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
	file $fname | grep -q gzip
	if [ "$?" -eq "0" ] ; then
		# Used by ia64
		    fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
	else
		    fkern_ver=`strings $fname 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
	fi
		[ "$fkern_ver" = "" ] && continue
#	echo "$fname --> $fkern_ver (but we want $we_want_version)" >> /dev/stderr
		[ "`echo "$fkern_ver" |fgrep "$we_want_version "`" = "" ] && continue
	[ -f "$fname" ] || continue
	[ -h "$fname" ] && continue
	kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
	file $fname | grep -q gzip
	if [ "$?" -eq "0" ] ; then
		# Used by ia64
		if [ "`gzip -cd $fname | strings 2> /dev/null | fgrep "$kdate"`" = "" ] ; then
		    LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it...\n"
		    duff_kernels="$fname $duff_kernels"
		else
		        [ "`echo "$fname" | fgrep "vmlinux"`" ] && continue
		        possible_kernels="$fname $possible_kernels"
		fi
	else
		if [ "`strings $fname 2> /dev/null | fgrep "$kdate"`" = "" ] ; then
		    LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it...\n"
		    duff_kernels="$fname $duff_kernels"
		else
		        [ "`echo "$fname" | fgrep "vmlinux"`" ] && continue
		        possible_kernels="$fname $possible_kernels"
		fi
	fi
	done
	if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
	possible_kernels=`find /boot/vmlinuz-2.* | tail -n1`
	fi
	if [ ! "$possible_kernels" ] ; then
		LogIt "No kernel matches exactly. Are there any duff kernels?"
		possible_kernels="$duff_kernels"
		if [ ! "$possible_kernels" ] ; then
		    LogIt "Sorry, no duff kernels either"
		else
		    LogIt "I bet you're running Debian or Gentoo, aren't you?"
		    LogIt "Your kernel doesn't have a sane builddate. Oh well..."
		fi
	fi
	possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | sort | uniq | tr '\n' ' '`
	noof_kernels=`CountItemsIn "$possible_kernels"`
	if [ "$noof_kernels" -eq "0" ] ; then
		LogIt "Could not find your kernel.\n"
	if [ -e "/boot/vmlinuz" ] ; then
		LogIt "Using /boot/vmlinuz as a last resort.\n"
		output=/boot/vmlinuz
		else
		output=""
	fi
	elif [ "$noof_kernels" -eq "1" ] ; then
		kernelpath=`echo "$possible_kernels" | sed s/' '//`
		echo "Your kernel is $kernelpath (v`uname -r`)" >> $LOGFILE
		output="$kernelpath"
	else
		for i in $possible_kernels ; do
		    if echo $i | grep "`uname -r`" ; then
		LogIt "OK, I used my initiative and found that "
		        LogIt "$i is probably your kernel. "
		output="$i"
		return
		fi
		done
	if echo " $possible_kernels " | fgrep "/boot/vmlinuz " &> /dev/null ; then
		output=/boot/vmlinuz
		echo "Schlomo, this one's for you." >> $LOGFILE
	else
		    LogIt "Two or more possible kernels found. You may specify any one of them and the \n"
		LogIt "boot disks will still work, probably. If one does not work, try another.\n"
		    LogIt "$possible_kernels\n"
		    echo ""
	fi
	fi
	echo "$output" | tr -s ' ' '\n' | sort -u | tr '\n' ' '
}





TryToFitDataIntoSeveralDirs() {
	local bigdir minidir_root noof_disks diskno list_of_files filename old_pwd progress
	local i retval noof_disks total_files list_of_devs
	bigdir=$1
	minidir_root=$2
	BIG_CLUNKY_SIZE_COUNTER=0
	retval=0
	noof_disks=1

	echo -en "\r                                                                            \rDividing data into several groups..."
	old_pwd=`pwd`
	cd $bigdir
	list_of_files=`GetFileSizeList . | sort -nr | cut -f2 | fgrep -v "/dev/"`
	progress=0
	total_files=`CountItemsIn "$list_of_files"`
	if [ "`echo "$filename" | grep -x "/dev/.*"`" ] ; then
		filesize=1
	fi
	mkdir -p $minidir_root/$noof_disks
	if [ -e "dev" ] ; then
		echo "Copying dev/* to $minidir_root/$noof_disks" >> $LOGFILE
		cp --parents -pRdf dev $minidir_root/$noof_disks
	fi
	TemporarilyCompressAllFiles "$list_of_files" $minidir_root
	for filename in $list_of_files ; do
		AddFileToDir $filename $minidir_root $noof_disks
	i=$?
	if [ "$i" -gt "$noof_disks" ] ; then
		noof_disks=$i
		echo -en "\r\t\t\t\t\t\t($noof_disks disks)"
	fi
	if [ "$i" -eq "0" ] ; then
		LogIt "Cannot add file $filename to minidir $minidir_root\n"
		retval=$(($retval+1))
	fi
		progress=$(($progress+1))
	echo -en "\r\t\t\t\t\t\t\t\t$(($progress*100/$total_files))% complete\r"
	done
	cd $old_pwd
	echo -en "\rThe files have been subdivided into $noof_disks directories.                                                            \r"
	rm -Rf $minidir_root/compressed
	if [ "$retval" -gt "0" ] ; then
	return 0
	else
	return $noof_disks
	fi
}



TurnTgzIntoRdz() {
	local tgz_dir_fname rdz_fname ramdisksize tempfile mountpoint old_pwd nodes disksize kernelsize maxsize res currsize not_copied j k floppy_modules s w
	tgz_dir_fname=$1
	rdz_fname=$2
	ramdisksize=$3
	disksize=$4
	kernelsize=$5
	maxsize=$(($disksize-$kernelsize))
	maxsize=$(($maxsize*2)); # to allow for compression of 50%
	tempfile=$TMP_ROOT/temp.rd
	mountpoint=$TMP_ROOT/mnt1
	res=0
	echo -en "..."
	dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
	echo -en "..."
	mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE

	[ "$?" -ne "0" ] && cat /tmp/mke2fs.$$
	rm -f /tmp/mke2fs.$$
	echo -en "..."
	mkdir -p $mountpoint
	mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint"
	echo -en "..."
	old_pwd=`pwd`
	cd $mountpoint
#    [ -e "$MINDI_LIB/memtest.img" ] && echo "Yep, this is a multi-function CD" > MULTIFUNC
	cp -Rdf $tgz_dir_fname/* . 2>> $LOGFILE >> $LOGFILE
	tar -zxf symlinks.tgz || Die "Cannot untar symlinks.tgz"
	cd dev || Die "Can't cd to dev"
	tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
	rm -f dev-entries.tgz
	cd ..

# add insmod.static and insmod.static.old if (a) they exist and (b) this is a 64-bit distro
#    if [ "`uname -a | grep x86`" ] || [ "`uname -a | grep amd64`" ] ; then

	for w in insmod.static insmod.static.old ; do
	s=`which $w 2> /dev/null`
	if [ -e "$s" ] ; then
		cp --parents -af $s .
#	    LogIt "Copying $s to initrd"
	fi
	done

#    fi

	mkdir -p tmp
	[ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
	for w in cdrom floppy groovy-stuff ; do
		mkdir -p mnt/$w
	done
	if [ "$RUN_AFTER_INITIAL_BOOT_PHASE" ] ; then
	ReplaceIndividualLine sbin/init `grep -n "#WHOLIVESINAPINEAPPLEUNDERTHESEA#" sbin/init | cut -d':' -f1` "$RUN_AFTER_INITIAL_BOOT_PHASE"
	fi
	if [ "$RUN_AFTER_BOOT_PHASE_COMPLETE" ] ; then
	ReplaceIndividualLine sbin/init `grep -n "#ABSORBENTANDYELLOWANDPOROUSISHE#" sbin/init | cut -d':' -f1` "$RUN_AFTER_BOOT_PHASE_COMPLETE"
	fi

	lsmod > tmp/original-lsmod.txt
	
	cp --parents -Rdf /dev/fd0*[1,2][4,7,8]* . 2> /dev/null
	cd $old_pwd
	echo -en "..."
	MakeModuleLoadingScript $TMPMODPROBE_FLAG $mountpoint/sbin/insert-all-my-modules
	echo -en "..."
	old_pwd=`pwd`
	if [ "$YOUR_KERNEL_SUCKS" ] ; then
	cd $TMP_ROOT
	floppy_modules_path=lib/modules/$FAILSAFE_KVER
	else
	cd /
###
### Sq-Modification... Use kernel name in module path if specified.
###
		#floppy_modules_path=lib/modules/`uname -r`
		if [ "${kernelname}" != "" ]
		then
		  floppy_modules_path=lib/modules/${kernelname}
		else
		  floppy_modules_path=lib/modules/`uname -r`
		fi
###
### Sq-Modification end
###
	fi
	floppy_modules=""
	if [ "$disksize" -lt "2880" ] ; then
	list_of_groovy_mods="$FLOPPY_MODS `WhichOfTheseModulesAreLoaded "$SCSI_MODS"`"
	else
	list_of_groovy_mods="$CDROM_MODS `WhichOfTheseModulesAreLoaded "$SCSI_MODS"`"
	fi
	if [ -e "$MONDO_TMP/start-nfs" ] ; then
		cp -a $MONDO_TMP/start-nfs $mountpoint/sbin
		# For PXE boot
		list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
		# Here we need the net busybox
		mv $mountpoint/bin/busybox.net $mountpoint/bin/busybox
	else
		rm -f $mountpoint/bin/busybox.net
	fi
	[ -e "$floppy_modules_path" ] || LogIt "path $floppy_modules_path does not exist. If you're not using a modular kernel then you're NUTS."
	for i in $list_of_groovy_mods ; do
	floppy_modules="$floppy_modules `FindSpecificModuleInPath $floppy_modules_path $i`"
	done
	for i in $floppy_modules ; do
		[ -e "$i" ] && s=`du -sk $i | cut -f1` || s=""
	[ "$YOUR_KERNEL_SUCKS" ] && i=$TMP_ROOT/$i
	echo "Adding $i ($s KB) to the rootfs" >> $LOGFILE
	cp -df $i $mountpoint/ || LogIt "Unable to copy $i to $mountpoint"
	[ "`echo "$i" | fgrep ".gz"`" ] && gunzip -f $mountpoint/`basename $i`
	done
#    if [ -e "/dev/.devfsd" ] ; then
#	echo "Copying devfs stuff to ramdisk" >> $LOGFILE
#	for i in /dev /etc/devfsd.conf /etc/modules.devfs /lib/dev-state ; do
#	    cp --parents -pRdf $i $mountpoint/ 2>> $LOGFILE
#	done
#    fi
	if [ ! -e "/sbin/devfsd" ] || [ "$disksize" -lt "2880" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
		echo "Deleting devfsd daemon from ramdisk" >> $LOGFILE
		[ ! -e "/sbin/devfsd" ] && echo "...because /sbin/devfsd not found" >> $LOGFILE
		[ "$disksize" -lt "2880" ] && echo "...because disksize = $disksize" >> $LOGFILE
		[ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && echo "...because kernel is failsafe" >> $LOGFILE
#        ls -l $mountpoint/sbin/devfsd &> /dev/null || Die "Can't find devfsd daemon on ramdisk"
		rm -f $mountpoint/sbin/devfsd
	fi
	cd $old_pwd
	[ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
	dd if=/dev/zero of=$mountpoint/zero &> /dev/null
	rm -f $mountpoint/zero
	if [ "`DidMondoCallMe`" ] ; then
		MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
		cp -f $mountpoint/tmp/mondo-restore.cfg $MONDO_TMP &> /dev/null
		cp -f $TMP_ROOT/mountlist.txt $mountpoint/tmp/ || Die "Cannot copy mountlist to ramdisk"
		echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
		echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
		[ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
		[ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
	[ "$USE_STAR" = "yes" ] && echo =en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
	fi
	mkdir -p $mountpoint/tmp
	mkdir -p $mountpoint/proc
	echo "$disksize" > $mountpoint/tmp/$disksize.siz
	find $mountpoint -name CVS -exec rm -rf '{}' \;
	umount $mountpoint || Die "Cannot unmount $tempfile"
	dd if=$tempfile bs=1k 2> /dev/null | gzip -v9 > $rdz_fname 2> /dev/null
#    gzip -9 $tempfile
#    mv $tempfile.gz $rdz_fname
	if [ "$res" -eq "0" ] ; then
		echo -en "..."
	else
		echo -en "\rMade an rdz WITH ERRORS.           \n"
	fi
	return 0
}



WhichOfTheseModulesAreLoaded() {
	local modname loaded_modules
	loaded_modules=" `lsmod | tr -s ' ' '\t' | cut -f1 | fgrep -vx "Modules" | tr '\n' ' '` "
	for modname in $1 ; do
	[ "`echo "$loaded_modules" | fgrep " $modname "`" ] && echo "$modname"
	done
}




ZipMinidirsIntoTarballs() {
	local minidir_root tardir noof_disks diskno old_pwd i
	minidir_root=$1
	tardir=$2
	noof_disks=$3

	echo -en "Tarring and zipping the group`PluralOrNot $noof_disks`..."
	mkdir -p $tardir
	mkdir -p $minidir_root/all
	old_pwd=`pwd`
	diskno=1
	while [ "$diskno" -le "$noof_disks" ] ; do
		cd $minidir_root/$diskno || LogIt "Warning - cannot cd to $minidir_root/$diskno"
		tar -cf - . 2>> $LOGFILE | gzip -9 > $tardir/$diskno.tar.gz || Die "Can't tar/gzip disk#$diskno; please tell Hugo -exactly- what the errors where."
		diskno=$(($diskno+1))
		echo -n "..."
	cp -pRdf * $minidir_root/all
	done
	mkdir -p $minidir_root/all/tmp
	cd $minidir_root/all
	size_of_all_tools=`du -sk . | cut -f1`
	if [ "`DidMondoCallMe`" ] ; then
		for q in filelist.full.gz biggielist.txt ; do
		    [ ! -e "$MONDO_TMP/$q" ] && Die "Cannot find $MONDO_TMP/$q"
		    cp -pRdf $MONDO_TMP/$q tmp/
		done
		mkdir -p $minidir_root/all/tmp
		echo -en "$FILES_IN_FILELIST" > $minidir_root/all/tmp/FILES-IN-FILELIST 2> /dev/null
		echo -en "$LAST_FILELIST_NUMBER" > $minidir_root/all/tmp/LAST-FILELIST-NUMBER 2> /dev/null
	fi
	tar -b 4096 -cf - * 2> /dev/null | gzip -9 > $tardir/all.tar.gz
	dd if=/dev/zero bs=1k count=64 >> $imagesdir/all.tar.gz 2> /dev/null
	[ "`du -sm $imagesdir/all.tar.gz | cut -f1`" -ge "30" ] && Die "You have too many tools in your shed"
	cd $old_pwd
	rm -Rf $minidir_root
	echo -e "$DONE"
}




ListUnsavedKernelModules() {
	local fname modules
	fname=/tmp/$RANDOM.$$.$RANDOM
	ListKernelModules > $fname
	lsmod | cut -d' ' -f1 >> $fname
	lsmod | cut -d' ' -f1 >> $fname
	modules=`cat $fname | sort | uniq -d2 | tr '\n' ' '`
	rm -f $fname
	[ "$modules" ] && echo "Unsaved kernel modules: $modules" >> $LOGFILE
}





##############################################################################
#----------------------------------- main -----------------------------------#
##############################################################################


#AWK=`which gawk`
#LocateDeps $1
#MakeModuleLoadingScript /tmp/load-modules.sh
#exit 0


#cat /etc/mindi/deplist.txt | GenerateGiantDependencyList /tmp/deplist.old 200
#exit 0



if [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
	echo "mindi v$MINDI_VERSION"
	exit 0
fi

> $LOGFILE
echo "mindi v$MINDI_VERSION" >> $LOGFILE
### BCO
### Which arch are we on (useful for ia64 port)
export ARCH=`/bin/arch`
echo "$ARCH architecture detected" >> $LOGFILE
echo "mindi called with the following arguments:" >> $LOGFILE
echo "$@" >> $LOGFILE

if [ -e "/etc/conf.modules" ] && [ ! -e "/etc/modules.conf" ] ; then
	LogIt "Warning - Ancient distro detected." 1
	ln -sf /etc/conf.modules /etc/modules.conf
fi
[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && ln -sf /sbin/mkdosfs /sbin/mkfs.vfat

FindHomeOfMindiAndMondo
trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
AbortIfYourDistroIsAPieceOfStercus
[ "`uname -r | grep "2.4.[0-6]" | grep -v "2.4.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
# If we have a 2.6 kernel, the system uses module-init-tools which means that we
# may have the modprobe configuration spread out across multiple files in
# directory /etc/modprobe.d. If this is the case we concatenate these files into
# a temporary file for further processing. Otherwise we continue in the standard
# way. Note further that in case /etc/modprobe.d exists, we use it and ignore
# /etc/modprobe.conf which is exactly what module-init-tools does. The temporary
# modprobe.conf file is created in MakeModuleLoadingScript. AL041128.
if [ -d "/etc/modprobe.d" ] && [ `uname -r | cut -c1-3` == "2.6" ] ; then
  TMPMODPROBE_FLAG="Y"
else
  TMPMODPROBE_FLAG="N"
  [ -e "/etc/modprobe.conf" ] && [ ! -e "/etc/modules.conf" ] && ln -sf /etc/modprobe.conf /etc/modules.conf
  [ ! -e "/etc/modules.conf" ] && Die "/etc/modules.conf not found; you may have to create a softlink from /etc/conf.modules to /etc/modules.conf; of course, all good distros use modules.conf anyway..."
fi
FixPathIfBroken
[ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null | grep "2\.4" | cut -d' ' -f1`
AbortIfMkfsVfatMissing
### BCO
### Fix as it's not mandatory on ia64
if [ "$ARCH" = "ia64" ] ; then
	FindELiloBinary
else
	FindIsolinuxBinary
	FindLiloBinary
fi
cat /proc/mounts | fgrep " $TMP_ROOT " | fgrep tmpfs > /dev/null 2> /dev/null && TMP_ROOT=/home && LogIt "Changing TMP_ROOT to $TMP_ROOT because you're using tmpfs for /tmp" ; # tmpfs doesn't like Mindi and /tmp, for some reason
rm -f /tmp/mindi_lo
trap "Aborted" SIGTERM
DONE="\r\t\t\t\t\t\t\t\tDone.         "
CHOPSIZE=240
BIGNO=0
MAX_COMPRESSED_SIZE=1300
imagesdir=/root/images/mindi
mkdir -p $imagesdir
kernelpath=""
MONDO_ROOT=/tmp/mindilinux/mondo-root
mkdir -p $MONDO_ROOT

if [ "$#" -ge "2" ] ; then
	if [ "$1" = "--max-compressed-size" ] ; then
		MAX_COMPRESSED_SIZE=$2
		shift; shift
	fi
fi

FLOPPY_WAS_MOUNTED=""
for mtpt in /media/floppy /mnt/floppy /floppy ; do
	if mount | grep -w $mtpt &> /dev/null ; then
		FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
		umount $mtpt
	fi
done

if [ "$#" -ne "0" ] ; then
	if [ "$1" = "--findkernel" ] ; then
		res=`TryToFindKernelPath`
#	 2> /dev/null`
		if [ "$res" = "" ] ; then
		    exit 1
		else
		    echo "$res"
		    exit 0
		fi
	elif [ "$1" = "--makemountlist" ] ; then
		[ ! "$2" ] && Die "Please specify the output file"
		MakeMountlist $2
		exit $?
	elif [ "$1" = " --version" ] || [ "$1" = "-v" ] ; then
	echo "Mindi v$MINDI_VERSION"
		exit 0
	elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
	TMP_ROOT=$2
	MONDO_TMP=$2
	imagesdir=$3
	kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
###
### Sq-Modification...
### Attempt to locate kernel specific module path
### if module path is found then use it other wise use uname -r to set it...
###
		kernelname=`echo $kernelpath | cut -d'-' -f2-`
	LogIt "kernelname = $kernelname"
	LogIt "kernelpath = $kernelpath"
		if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
		then
		   LogIt "Module path for ${kernelpath} not found...\n"
		   LogIt "using running kernel\'s modules.\n"
		   kernelname=`uname -r`
		else
		   LogIt "Using modules for kernel: ${kernelname}\n"
		fi
###
### end of Sq-Modification
###
	TAPEDEV=$5
	TAPESIZE=$6
	FILES_IN_FILELIST=$7
	USE_LZO=$8
	CDRECOVERY=$9
		if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
		    IMAGE_DEVS=""
		else
		    IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
		fi
	if [ "${11}" ] ; then
		LILO_OPTIONS=""
#	    LogIt "LILO will use conservative settings, to be compatible with older BIOSes."
	fi
	LAST_FILELIST_NUMBER=${12}
		ESTIMATED_TOTAL_NOOF_SLICES=${13}
		EXCLUDE_DEVS="${14}"
		USE_COMP="${15}"
		USE_LILO="${16}"
	USE_STAR="${17}"
	INTERNAL_TAPE_BLOCK_SIZE="${18}"
		DIFFERENTIAL="${19}"
		NOT_BOOT="${20}"
		[ "$USE_COMP" = "" ] && USE_COMP=yes
		[ "$NOT_BOOT" = "" ] && NOT_BOOT=no
	[ "$TAPEDEV" ] && LogIt "This is a tape-based backup. Fine."
	[ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
		kernelname=`echo $kernelpath | cut -d'-' -f2-`
		if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
		then
		   LogIt "Module path for ${kernelpath} not found...\n"
		   LogIt "using running kernel\'s modules.\n"
		   kernelname=`uname -r`
		else
		   LogIt "Using modules for kernel: ${kernelname}\n"
		fi
	[ "$CDRECOVERY" = "yes" ] && [ "$TAPEDEV" != "" ] && Die "Sorry, you can't use --cd-recovery and --write-tapes at the same time"
		MONDO_ROOT=`echo $imagesdir | sed 's/\(.*\)\/.*/\1/'`
	[ "$MONDO_ROOT" = "" ] && Die "MONDO_ROOT is undefined"
	else
	echo "Syntax: mindi (--custom ....)" >> /dev/stderr
	exit 1
	fi
fi
#ScanCDandTape
[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
if [ "$CDRECOVERY" = "yes" ] ; then
	iso_cfg_file=$MINDI_LIB/isolinux-H.cfg
	sys_cfg_file=$MINDI_LIB/syslinux-H.cfg
else
	iso_cfg_file=$MINDI_LIB/isolinux.cfg
	sys_cfg_file=$MINDI_LIB/syslinux.cfg
fi




#ReplaceIndividualLine /tmp/init `grep -n "#WHOLIVESINAPINEAPPLEUNDERTHESEA#" /tmp/init | cut -d':' -f1` "$RUN_AFTER_INITIAL_BOOT_PHASE"
#exit 0


#ListKernelModules
#exit 0




[ -e "$iso_cfg_file" ] || Die "Cannot find $iso_cfg_file"
rm -Rf $TMP_ROOT/mindilinux/*
TMP_ROOT=$TMP_ROOT/mindilinux/$$
mkdir -p $TMP_ROOT
mkdir -p $imagesdir
if [ ! "`DidMondoCallMe`" ] ; then
	LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
	LogIt "Latest Mindi is available from http://mondorescue.berlios.de"
	LogIt "BusyBox sources are available from http://www.busybox.net"
	LogIt "------------------------------------------------------------------------------"
else
	echo "You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks" >> /var/log/mondo-archive.log
fi

# for Mandrake 9.2, which comes with two aes.o.gz modules :-/
insmod /lib/modules/`uname -r`/*/*/misc/aes.*o.gz >> $LOGFILE 2>> $LOGFILE
for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
	insmod $i >> $LOGFILE 2>> $LOGFILE
done

FILE_CACHE=$TMP_ROOT/mindi-file-loc-cache
KERN_DISK_MADE=""

echo "DIFFERENTIAL = $DIFFERENTIAL" >> $LOGFILE
echo "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE" >> $LOGFILE
echo "NOT_BOOT = '$NOT_BOOT'" >> $LOGFILE
if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
	LogIt "Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
	MakeMondoConfigFile $MONDO_TMP/mondo-restore.cfg
	MakeMountlist $MONDO_TMP/mountlist.txt
	mkdir -p $MONDO_TMP/small-all/tmp
	cd $MONDO_TMP/small-all
	cp -f $MONDO_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp || Die "Cannot copy small all.tar.gz"
	tar -cv tmp | gzip -9 > $MONDO_TMP/all.tar.gz || Die "Cannot make small all.tar.gz"
	sleep 2
	LogIt "Done. Exiting.\n"
	exit 0
fi

if [ "$kernelpath" = "" ] ; then
	[ "`DidMondoCallMe`" ] && Die "Please use -k <path> to specify kernel."
	if [ $USE_OWN_KERNEL != "yes" ]; then
		echo -en "Do you want to use your own kernel to build the boot disk (y/n) ?"
		read ch
		if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
		    USE_OWN_KERNEL="yes"
		fi
	fi
	if [ "$USE_OWN_KERNEL" = "yes" ]; then
	YOUR_KERNEL_SUCKS=""
	kernelpath=`TryToFindKernelPath`
	if [ "$kernelpath" = "" ] ; then
		echo -n "Please enter kernel path : "
		read kernelpath
	fi
	else
	YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
	fi
fi
if [ ! "`DidMondoCallMe`" ] ; then
	echo -en "Would you like to use LILO (instead of syslinux)\nfor your boot CD/floppies (y/n) ?"
	read ch
	if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
		USE_LILO=yes
	else
		USE_LILO=no
	fi
fi
if [ "$YOUR_KERNEL_SUCKS" != "" ] || [ "$kernelpath" = "" ] || [ "$kernelpath" = "SUCKS" ] || [ "$kernelpath" = "FAILSAFE" ] ; then
	kernelpath=$MINDI_LIB/vmlinuz
	LogIt "I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
	LogIt "However, you are still running your kernel. If Mindi fails to create your"
	LogIt "disks then it may still be a result of a problem with your kernel."
	pwd=`pwd`
	cd $TMP_ROOT
	bzip2 -dc $MINDI_LIB/lib.tar.bz2 | tar -x || Die "Cannot unzip lib.tar.bz2"
	cd $pwd
	YOUR_KERNEL_SUCKS="Your kernel sucks"
fi
echo -e "Mindi's temp dir = $TMP_ROOT \nMindi's output dir=$imagesdir" >> $LOGFILE
[ "$(($RANDOM%64))" -eq "0" ] && LogIt "Dude, I've looked inside your computer and it's really dusty..."
rm -f /tmp/mindi.err.*.tgz

[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it. Go to http://www.mondorescue.org and download it, then install it."

rm -f /root/images/mindi/{*img,*gz,*iso}

PrepareDataDiskImages $imagesdir
noof_disks=$?
ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
rds=$(($ramdisk_size-$((ramdisk_size%4096))))
ramdisk_size=$rds

echo "Ramdisk will be $ramdisk_size KB" >> $LOGFILE
if [ "$USE_LILO" = "yes" ] ; then
	if [ "$ARCH" = "ia64" ] ; then
		PrepareBootDiskImage_LILO $imagesdir $IA64_BOOT_SIZE $kernelpath $ramdisk_size || Die "Failed to create ia64 floppy disk image."
	else
		if ! PrepareBootDiskImage_LILO $imagesdir 1722 $kernelpath $ramdisk_size ; then
		LogIt "Warning - failed to create 1.72MB boot image. Please reduce your kernel's size"
		LogIt "if you want to make a 1.72MB floppy disk."
		fi
		PrepareBootDiskImage_LILO $imagesdir 2880 $kernelpath $ramdisk_size || Die "Failed to create 2.88MB floppy disk image."
	fi
else
	if ! PrepareBootDiskImage_SYSLINUX $imagesdir 1722 $kernelpath $ramdisk_size ; then
	LogIt "Warning - failed to create 1.72MB boot image. Please reduce your kernel's size"
	LogIt "if you want to make a 1.72MB floppy disk."
	fi
	if ! PrepareBootDiskImage_SYSLINUX $imagesdir 2880 $kernelpath $ramdisk_size ; then
		LogIt "Warning - failed to create 2.88MB floppy disk image."
		LogIt "Please reduce your kernel's size"
		LogIt "if you want to make a 2.88MB floppy disk."
	fi
	PrepareBootDiskImage_SYSLINUX $imagesdir 5760 $kernelpath $ramdisk_size || Die "Failed to create 5.76MB floppy disk image."
fi



[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
...Or type 'memtest' to test your PC's RAM thoroughly.\n"


if [ ! "`DidMondoCallMe`" ] ; then
	ListImagesForUser $imagesdir
	boot_dev=/dev/fd0u1722
	[ ! -e "$boot_dev" ] && mknod $boot_dev b 2 60
	[ ! -e "$boot_dev" ] && boot_dev=/dev/fd0H1722
	[ ! -e "$boot_dev" ] && Die "Oh Lord, will you PLEASE tell the vendor to create the 1.72MB devices in /dev?"
	if [ "$PROMPT_WRITE_BOOT_FLOPPIES" = "yes" ]; then
		OfferToCopyImagesToDisks $imagesdir $boot_dev $FDDEVICE
	fi
	OfferToMakeBootableISO $imagesdir
	LogIt "Finished.\n"
elif [ "$TAPEDEV" ] ; then
	mkdir -p /root/images/mindi
	rm -f /root/images/mindi/{*img,*gz,*iso}
	OfferToMakeBootableISO $imagesdir
	if [ -e "$imagesdir/all.tar.gz" ] ; then
		cp -f $imagesdir/all.tar.gz $MONDO_TMP/
	else
	Die "Cannot find all.tar.gz, to be written to tape"
	fi
else
	OfferToMakeBootableISO $imagesdir
fi
if [ "$imagesdir" != "/root/images/mindi" ] ; then
	for i in `find $imagesdir -maxdepth 1 -name "*.iso" -o -name "*.img"` ; do
	cp -f $i /root/images/mindi || LogIt "[line 1613] Cannot copy $i to /root/images/mindi"
	done
fi
[ "$TMP_ROOT" != "/tmp" ] && rm -Rf $TMP_ROOT
# cleanup
rm -fR /tmp/mountlist.txt.$$ $FDISKLOG /tmp/mindilinux
LogIt "$FRIENDLY_OUTSTRING"
ListUnsavedKernelModules
for mtpt in $FLOPPY_WAS_MOUNTED ; do
	mount $mtpt
done
echo "Mindi is exiting" >> $LOGFILE
exit 0
