Changeset 665 in MondoRescue for branches/stable/mindi/ChangeLog

Timestamp:

Jun 10, 2006, 12:27:29 PM (18 years ago)

Author:

bcornec

Message:

2.0.8-4 preparation

File:

• branches/stable/mindi/ChangeLog (modified) (37 diffs)

branches/stable/mindi/ChangeLog

@@ -3 +3 @@
 MINDI CHANGES
 
+1.0.8-4 (2006-06-10)
+- nfsmount option added to allow redeployment from another NFS server (Bruno Cornec)
+
 1.0.8-3 (2006-06-07)
-- exec-shield removed for mindi
-  (Bruno Cornec)
-- Fix a bug for ia64 build in mindi where locallib was undefined
-  (Bruno Cornec)
-- Fix a bug for SuSE and Debian where $dfam was used in install.sh
-  (Bruno Cornec)
-- Make the init script mdadm-aware
-  (Andree Leidenfrost)
+- exec-shield removed for mindi (Bruno Cornec)
+- Fix a bug for ia64 build in mindi where locallib was undefined (Bruno Cornec)
+- Fix a bug for SuSE and Debian where $dfam was used in install.sh (Bruno Cornec)
+- Make the init script mdadm-aware (Andree Leidenfrost)
 
 1.0.8-2 (2006-06-02)
-- Fix bugs in the swap+LABEL code found on rhel4
-  (Peter Naber/Bruno Cornec)
-- PXE mode now supports change of NIC for redeployment
-  (Bruno Cornec)
+- Fix bugs in the swap+LABEL code found on rhel4 (Peter Naber/Bruno Cornec)
+- PXE mode now supports change of NIC for redeployment (Bruno Cornec)
 
 1.0.8-1 (2006-05-25)
 - new build process (Bruno Cornec)
-- Fix a bug when a disk less than 2.8 MB can be built, to
-  include enough modules to support SCSI cds 
-  (Bruno Cornec)
-- Fix a bug in .spec for RPM build (%attr now unused)
-  (Bruno Cornec)
-- Add support for LABEL on swap partitions 
-  (Michel Loiseleur + Julien Pinon)
-- Attempt to fix bug 6827 (addition of a script for 
-  busybox udhcpc to support pxe/dhcp restore)
-  (Bruno Cornec)
+- Fix a bug when a disk less than 2.8 MB can be built, to include enough modules to support SCSI cds (Bruno Cornec)
+- Fix a bug in .spec for RPM build (%attr now unused) (Bruno Cornec)
+- Add support for LABEL on swap partitions (Michel Loiseleur + Julien Pinon)
+- Attempt to fix bug 6827 (addition of a script for busybox udhcpc to support pxe/dhcp restore) (Bruno Cornec)
 - support of dm and LVM v2 (Andree Leidenfrost)
 - analyze-my-lvm is under $MINDI_LIB (Andree Leidenfrost)
-- Fix a bug introduced by trying to avoid an error 
-  message when modprobe.d doesn't exist
-  (Johannes Franken)
-- Fix for Bug #6975 (/net is now excluded from kernel search location)
-  (Bruno Cornec)
+- Fix a bug introduced by trying to avoid an error message when modprobe.d doesn't exist (Johannes Franken)
+- Fix for Bug #6975 (/net is now excluded from kernel search location) (Bruno Cornec)
 - Allow 5670 MB fllopy disks for lilo as well (Bruno Cornec)
 - Add missing net modules (Klaus Ade Johnstad)
@@ -43 +31 @@
 1.0.7 (2006-03-10)
 - Fix issue for 2.6 kernels with VIA chipsets (Andree Leidenfrost)
-- stop creating further size of floppy disks if the smaller one succeeds 
-  (Bruno Cornec)
-- init revamped (removed unnecessary second general module loading phase,
-  start NFS appropriately depending on PXE or simple NFS) 
-  (Andree Leidenfrost)
+- stop creating further size of floppy disks if the smaller one succeeds (Bruno Cornec)
+- init revamped (removed unnecessary second general module loading phase, start NFS appropriately depending on PXE or simple NFS) (Andree Leidenfrost)
 - Changed module 'nfsacl' to 'nfs_acl' (Andree Leidenfrost)
 - Mindi/DiskSize is gone (Bruno Cornec)
-- useless cat, sort|uniq commands removed 
-  (Bruno Cornec/Sébastien Aperghis-Tramoni)
+- useless cat, sort|uniq commands removed (Bruno Cornec/Sébastien Aperghis-Tramoni)
 - Doc cleanup (Andree Leidenfrost)
 - Bug fix for chown in install.sh (JeffS)
@@ -57 +41 @@
 - rpmlint cleanups
 - Get mindi to look for analyze-my-lvm in it's library directory MINDI_LIB (See also Debian bug #351446.)
-- mindi only deletes freshly created 1440kb images in case of error (See also Debian Bug #348966.)
-  (Andree Leidenfrost)
-- try standard grub-install in grub-MR restore script before trying anything fancy
-  (Andree Leidenfrost)
+- mindi only deletes freshly created 1440kb images in case of error (See also Debian Bug #348966.) (Andree Leidenfrost)
+- try standard grub-install in grub-MR restore script before trying anything fancy (Andree Leidenfrost)
 - busybox mount should be called with -o ro for PXE (Make RHEL 3 works in PXE
-with a 2.6 failsafe kernel now available)
-  (Bruno Cornec)
-- Fix mindi for 2.6 Failsafe support
-  (Bruno Cornec)
-- mindi now depends on grep >= 2.5 (for -m option)
-  (Marco Puggelli/Bruno Cornec)
-- Fix a bug in LVM context for RHEL4 in GetValueFromField
-  (Rémi Bondoin/Bruno Cornec)
+with a 2.6 failsafe kernel now available) (Bruno Cornec)
+- Fix mindi for 2.6 Failsafe support (Bruno Cornec)
+- mindi now depends on grep >= 2.5 (for -m option) (Marco Puggelli/Bruno Cornec)
+- Fix a bug in LVM context for RHEL4 in GetValueFromField (Rémi Bondoin/Bruno Cornec)
 - New RPM Build environement (Bruno Cornec)
 - mindi now supports x86_64 natively (Bruno Cornec)
-- stop creating further size of floppy disks if the smaller one succeeds
-  (Bruno Cornec)
+- stop creating further size of floppy disks if the smaller one succeeds (Bruno Cornec)
 
 1.06 (2005-12-23)
 - mindi manpage added (Andree Leidenfrost)
 - clean up remaining mount points, mindi.err at the end (Wolfgang Rosenauer)
-- fix bugs for SuSE distro around tar, tr and find arguments order 
-  (Wolfgang Rosenauer)
+- fix bugs for SuSE distro around tar, tr and find arguments order (Wolfgang Rosenauer)
 - new busybox.net version used for better PXE support (Bruno Cornec)
 - USB keyboard support (Bruno Cornec)
 - -p should now work with ISO/PXE/NFS modes (Bruno Cornec)
-- relocate what was under /usr/share to /usr/lib (FHS compliance) 
-  (Bruno Cornec/Andree Leidenfrost)
-- manage non ambiguous delivery under /usr (packages) or /usr/local (tar ball)
-  (Bruno Cornec)
-- install script rewritten and used for RPM build, with new layout 
-  (Sébastien Aperghis-Tramoni/Bruno Cornec)
+- relocate what was under /usr/share to /usr/lib (FHS compliance) (Bruno Cornec/Andree Leidenfrost)
+- manage non ambiguous delivery under /usr (packages) or /usr/local (tar ball) (Bruno Cornec)
+- install script rewritten and used for RPM build, with new layout (Sébastien Aperghis-Tramoni/Bruno Cornec)
 - use parted2fdisk everywhere (Bruno Cornec)
-- use MONDO_LIB exported by mondoarchive instead of MONDO_HOME guessed 
-  (Bruno Cornec)
-- RPM build for fedora core 4, sles9, redhat 7.3, rhel 3/4, mandriva 2006.0, 
-  mandrake 10.2/10.1 (Bruno Cornec/Gary Granger)
+- use MONDO_LIB exported by mondoarchive instead of MONDO_HOME guessed (Bruno Cornec)
+- RPM build for fedora core 4, sles9, redhat 7.3, rhel 3/4, mandriva 2006.0, mandrake 10.2/10.1 (Bruno Cornec/Gary Granger)
 - VERSION/RELEASE Tag added (Bruno Cornec)
 - VMPlayer support
-- Code cleanup, small fixes, PXE/NFS code improvements 
-  (Wolfgang Rosenauer/Sébastien Aperghis-Tramoni/Bruno Cornec
-- New switches for PXE mode (ping & ipconf, Cf README.pxe) 
-  (Sébastien Aperghis-Tramoni/Bruno Cornec)
+- Code cleanup, small fixes, PXE/NFS code improvements (Wolfgang Rosenauer/Sébastien Aperghis-Tramoni/Bruno Cornec
+- New switches for PXE mode (ping & ipconf, Cf README.pxe) (Sébastien Aperghis-Tramoni/Bruno Cornec)
 - mindi-kernel added to SVN (Bruno Cornec)
 
 1.05 (2005-11-19)
-- Bug fix for ldd output incorrectly handled, leading to "grep not found" error
-  (Andree Leidenfrost)
-- NFS now works in interactive mode, and nolock problems are solve
-  (Andree Leidenfrost)
-- IA-64 support is now working for rhel 3
-  (Bruno Cornec)
-- add MINDI_CONF to the mindi LOGFILE 
-  (Philippe De Muyter)
-- Speed up fdisk'ing dev/ida raid devices
-  (Philippe De Muyter)
+- Bug fix for ldd output incorrectly handled, leading to "grep not found" error (Andree Leidenfrost)
+- NFS now works in interactive mode, and nolock problems are solve (Andree Leidenfrost)
+- IA-64 support is now working for rhel 3 (Bruno Cornec)
+- add MINDI_CONF to the mindi LOGFILE (Philippe De Muyter)
+- Speed up fdisk'ing dev/ida raid devices (Philippe De Muyter)
 
 1.04 (2005-05-03)
 - support exec-shield
-- added 'ide-generic' module to IDE modules in mindi to ensure that kernels
-  with fully modularised IDE sub-system boot
-- rewrote script 'wait-for-petris' to ensure that petris actually starts and
-  can be restarted reliably
-- fixed syntax error in mindi where a wrong delimiter is used in and sed call
-  when processing file '/etc/issue.net'
-- removed '#!/bin/bash' from file 'rootfs/etc/bashrc' (bashrc get sourced, not
-  executed)
+- added 'ide-generic' module to IDE modules in mindi to ensure that kernels with fully modularised IDE sub-system boot
+- rewrote script 'wait-for-petris' to ensure that petris actually starts and can be restarted reliably
+- fixed syntax error in mindi where a wrong delimiter is used in and sed call when processing file '/etc/issue.net'
+- removed '#!/bin/bash' from file 'rootfs/etc/bashrc' (bashrc get sourced, not executed)
 - removed executable flag from:
 - 'rootfs/etc/ld.so.cache'
@@ -134 +94 @@
 - better kernel-level logging
 - added ACL, xattr binaries to deplist.txt
-- fixed obscure bug which occasionally stopped mindi from correctly finding
-  and documenting all LVM2 LVM-on-RAID volumes
-  
+- fixed obscure bug which occasionally stopped mindi from correctly finding and documenting all LVM2 LVM-on-RAID volumes 
 1.01 (2004-06-21)
 - added ide_tape and other modules to mindi's config detection
@@ -198 +156 @@
 - better ISO support
 - tweaked mindi to use 10-15% fewer floppies
-- added RUN_AFTER_INITIAL_BOOT_PHASE var at start of Mindi, which
-  user may use to force Mindi to run command before bootstrapping
-  to aux data disks or CD - e.g. 'echo engage > /proc/scsi/something'
-- allow for Debian & other Stiefkinder that use 'none', not 'swap'
-  as the mountpoint of the swap partition
+- added RUN_AFTER_INITIAL_BOOT_PHASE var at start of Mindi, which user may use to force Mindi to run command before bootstrapping to aux data disks or CD - e.g. 'echo engage > /proc/scsi/something'
+- allow for Debian & other Stiefkinder that use 'none', not 'swap' as the mountpoint of the swap partition
 - removed afio dependency
-- added RUN_AFTER_BOOT_PHASE_COMPLETE to let user specify a command
-  to be run by Mindi after it boots but before it runs mondorestore
+- added RUN_AFTER_BOOT_PHASE_COMPLETE to let user specify a command to be run by Mindi after it boots but before it runs mondorestore
 - re-worked install.sh and tarball not to use tgz's
 - cleared up the boot msg
@@ -225 +179 @@
 - clean up some calls to grep, esp. partition_mountpt=...
 - corrected some bashisms, to suit Debian ped- er, users
-- made first line refer to bash, not sh, to make sure 
-  the Debian people know Mindi requires bash, not hs
+- made first line refer to bash, not sh, to make sure the Debian people know Mindi requires bash, not hs
 - changed grep -v "#" and grep -vx "#.*" to grep -vx " *#.*"
-- disabled code which would make Mindi use sfdisk instead of fdisk
-  if it looked as if Debian's fdisk would misbehave
+- disabled code which would make Mindi use sfdisk instead of fdisk if it looked as if Debian's fdisk would misbehave
 
 v0.91 (2003-04-04)
@@ -240 +192 @@
 - try harder to boot from CD, even if tape fails
 - added ADDITIONAL_BOOT_PARAMS to be sent to kernel
-- better resolution of relative softlinks, leading to fewer
-  duplicates on data disks and therefore fewer data disks
-- detect Debian+devfs; use sfdisk instead of fdisk in that
-  eventuality, to work around yet another of Debian's warts
+- better resolution of relative softlinks, leading to fewer duplicates on data disks and therefore fewer data disks
+- detect Debian+devfs; use sfdisk instead of fdisk in that eventuality, to work around yet another of Debian's warts
 - removed /lib/libuuid.* from rootfs.tgz
 - fixed vi
-- mindi now uses gawk --traditional (making gawk behave in a functionally
-  identical way to awk) - PASS; great, so now Debian needs to fix its awk :)
+- mindi now uses gawk --traditional (making gawk behave in a functionally identical way to awk) - PASS; great, so now Debian needs to fix its awk :)
 - removed / from list of dirs accessed when trying to resolve deplist entry
 - spinner bugfix; handle odd LABELs properly (Tom Mortell)
@@ -267 +216 @@
 
 v0.71 (2002-11-17)
-- if your kernel's builddate doesn't match any of the kernels in 
-  your /boot directory then fudge the issue & find the closest 
-  match (*grumble* Debian)
+- if your kernel's builddate doesn't match any of the kernels in your /boot directory then fudge the issue & find the closest match (*grumble* Debian)
 - scan tape & CD at start, to force inclusion of modules on boot device
 - double EXTRA_SPACE if >7 disks
@@ -303 +250 @@
 - added RPC support to uClibc
 - cleaned up creation of Mondo-Mindi configuration file
-- fixed bug in TryToFindKernelPath which stopped it from handling
-  multiple, same-version kernels gracefully
+- fixed bug in TryToFindKernelPath which stopped it from handling multiple, same-version kernels gracefully
 - cleaned up deplist.txt
 - receive 'DIFFERENTIAL' variable from Mondo
@@ -367 +313 @@
 
 v0.62 (2002-04-08)
-- keep certain /dev directories compressed until boot-time, to allow
-  Mindi to support larger kernels
+- keep certain /dev directories compressed until boot-time, to allow Mindi to support larger kernels
 - cleaned up logging a lot
 - better detection of the kernel currently in use
@@ -389 +334 @@
 
 v0.58-r6 (2002-03-03)
-- reassemble large data/library files who have older 'mv' code which doesn't
-  like to overwrite symlinks - affects older RH+Slack systems (Andrew Bulhak)
+- reassemble large data/library files who have older 'mv' code which doesn't like to overwrite symlinks - affects older RH+Slack systems (Andrew Bulhak)
 - call /usr/bin/logger, not 'logger', in LogIt()
 - run chmod 755 `which start-nfs` before running start-nfs
@@ -406 +350 @@
 v0.58-r4 (2002-02-18)
 - quash error if /opt not found
-- use /tmp/groovy-stuff instead of /mnt/groovy-stuff for
-  handling data disks and their contents, for tape users
+- use /tmp/groovy-stuff instead of /mnt/groovy-stuff for handling data disks and their contents, for tape users
 
 v0.58-r3 (2002-02-17)
@@ -449 +392 @@
 - moved many global vars to start of script
 - better at finding US kbd maps
-- migrating to a single configuration file, /tmp/mondo-restore.cfg, for
-  Mondo users; file is not in use yet but is there for future expansion
+- migrating to a single configuration file, /tmp/mondo-restore.cfg, for Mondo users; file is not in use yet but is there for future expansion
 
 v0.55 (2002-01-28)
-- MINDI_HOME and MONDO_HOME defined at start of each source file, making
-  it easier to relocate Mindi and Mondo if desired
+- MINDI_HOME and MONDO_HOME defined at start of each source file, making it easier to relocate Mindi and Mondo if desired
 - tries to mount /dev/hd[a-h] at boot-time, looking for CD-ROM; was hd[a-d]
 - re-enabled the msg asking user to upgrade LILO if v21.6
-- Lin/Win users are much, _much_ less likely to run out of disk space now
-  when restoring from backups (Carlos Molina)
+- Lin/Win users are much, _much_ less likely to run out of disk space now when restoring from backups (Carlos Molina)
 - patch from Andrej Borsenkow to help w/Mandrake 8.1
 - disabled ramdisk free space checker (some distros don't like it)
@@ -482 +422 @@
 - improved TryToFindKernelPath() function
 - don't offer NFS users Nuke Mode
-- finds and uses lilo.real if user is using Debian, a distro which
-  installs a shell script where the lilo executable should go
+- finds and uses lilo.real if user is using Debian, a distro which installs a shell script where the lilo executable should go
 - improved support for XFS users who opt to use failsafe kernel
 - uses user's lsmod, depmod, insmod, etc.
@@ -493 +432 @@
 v0.52-2 (2002-01-10)
 - fixed a bug in the handling of non-English keyboard maps
-- force failsafe kernel to provide reiserfs.o, xfs.o, jfs.o, ext2.o,
-  ext3.o and loop.o at boot-time, just in case
+- force failsafe kernel to provide reiserfs.o, xfs.o, jfs.o, ext2.o, ext3.o and loop.o at boot-time, just in case
 - added /dev/sr[0-3] devices
 - copy LAST_FILELIST_NUMBER to /tmp, for compatibility with Mondo v1.3x
 - incorporates NFS-related settings, if supplied by Mondo v1.3x
-- replace busybox's mount with standard libc5 mount ater restoring
-  tools from floppies: NFS mounting requires full mount
+- replace busybox's mount with standard libc5 mount ater restoring tools from floppies: NFS mounting requires full mount
 - always make mindi.iso
 
@@ -511 +448 @@
 - /sbin and /usr/sbin added temporarily to PATH when Mindi runs
 - if Mondo asks then force LILO to run in backward-compatible mode
-- if Mondo's tmpdir has post-nuke.tgz in it then extract it and
-  incorporate its files in the data disks
+- if Mondo's tmpdir has post-nuke.tgz in it then extract it and incorporate its files in the data disks
 - losetup /dev/loop0 -d before calling LILO (Norm Crowfoot)
-- if keyboard mapping dir (usu. /lib/kbd or /usr/lib/kbd) cannot be
-  found then don't abort; simply tell the user the default keyboard 
-  mapping will be used
+- if keyboard mapping dir (usu. /lib/kbd or /usr/lib/kbd) cannot be found then don't abort; simply tell the user the default keyboard mapping will be used
 - added /dev/hd[a,b,c,d][17-24] to the rootfs tarball
-- won't use LILO's optimizations when creating boot floppy; however,
-  optimizations are used on CD unless --broken-bios in call to Mondo
+- won't use LILO's optimizations when creating boot floppy; however, optimizations are used on CD unless --broken-bios in call to Mondo
 - won't write data disks to start of tape; lets Mondo do that
-- tweaked how Mindi moves all.tar.gz around, to make it more
-  Mondo-friendly
+- tweaked how Mindi moves all.tar.gz around, to make it more Mondo-friendly
 - tweaked Mindi's disk-splitter
 - user must unmount /dev/loop0 before calling Mindi: LILO insists...
 - added NFS-related entries to deplist.txt
-- if not called by Mondo then don't let user choose Interactive/Nuke/
-  whatever; just offer Expert
+- if not called by Mondo then don't let user choose Interactive/Nuke/ whatever; just offer Expert
 
 v0.51-1 (2001-12-25)
@@ -543 +474 @@
 - log Mindi's version# in the event of a fatal error
 - make Mindi's boot-time output more esthetically pleasing
-- if filesystem is type 'image', according to Mondo, then in filelist
-  its partition type will be listed as the hexadecimal string (e.g.
-  'b', '83', etc.) and the partition mountpoint will be 'image'
+- if filesystem is type 'image', according to Mondo, then in filelist its partition type will be listed as the hexadecimal string (e.g.  'b', '83', etc.) and the partition mountpoint will be 'image'
 
 v0.50-2 (2001-12-15)
@@ -554 +483 @@
 - breaks compatibility with Mondo v1.2x
 - if user's fstab has weird line(s) then ignore; don't abort
-- working on CDROM_MODS, trying to make it work on Stewart Charnell's
-  hardware setup
+- working on CDROM_MODS, trying to make it work on Stewart Charnell's hardware setup
 - cleaned up /sbin/init and /sbin/post-init a bit
 
 v0.48-2 (2001-12-09)
-- when insmod'g modules from ramdisk's root dir, use 'ls /*.o*'
-  (was 'ls /*.*') to find them
-- if RAID controller(s) are detected then pause for 10s to let them
-  intialize by themselves (some 3ware RAID controllers require this)
-- cleaned up /sbin/init and /sbin/post-ini; the former now controls
-  initialization of hardware, drivers, tools, etc. and the latter
-  runs mondo-restore if it exists
+- when insmod'g modules from ramdisk's root dir, use 'ls /*.o*' (was 'ls /*.*') to find them
+- if RAID controller(s) are detected then pause for 10s to let them intialize by themselves (some 3ware RAID controllers require this)
+- cleaned up /sbin/init and /sbin/post-ini; the former now controls initialization of hardware, drivers, tools, etc. and the latter runs mondo-restore if it exists
 - better detection of and compatibility with SCSI CD-ROM drives
 - chopsize is now 64KB; was 128KB
@@ -571 +495 @@
 
 v0.48-1 (2001-12-08)
-- better logging of find-and-mount-cdrom's progress (to
-  /tmp/mondo-restore.log)
+- better logging of find-and-mount-cdrom's progress (to /tmp/mondo-restore.log)
 - somehow, lilo was re-enabled in deplist.txt; DISABLED (again *g*)
 - added 'linear' to the list of modules Mindi always backs up
-- if called by Mondo then pass the name & device of the user's boot
-  loader to the restore phase, by copying BOOTLOADER.* to the ramdisk
-- if loading from floppies then try to mount CD-ROM a 2nd time after
-  extracting files from data floppies, just in case user is a CD user
-  who couldn't get their CD-ROM drive to work initially
+- if called by Mondo then pass the name & device of the user's boot loader to the restore phase, by copying BOOTLOADER.* to the ramdisk
+- if loading from floppies then try to mount CD-ROM a 2nd time after extracting files from data floppies, just in case user is a CD user who couldn't get their CD-ROM drive to work initially
 - added fix to make sure /root/images/mindi is created (Charlie Root)
 - aware of 'iso' boot mode, for future expansion
 
 v0.47 (2001-12-04)
-- added /dev/cdrom/cdrom[1-4] to the devices automatically excluded
-  from mountlist.txt
-- added '-f-' to the end of most tar commands, to see if it fixes a
-  bug in some obscure Debian distros
+- added /dev/cdrom/cdrom[1-4] to the devices automatically excluded from mountlist.txt
+- added '-f-' to the end of most tar commands, to see if it fixes a bug in some obscure Debian distros
 - added network-related dependencies to deplist.txt
-- if called by Mondo then don't write floppy images to disks; let
-  Mondo do that: less irritating for user
-- if called by Mondo then do some clever tricks to add mondo-restore
-  and its dependencies (mondo-restore is now a dynamic executable)
+- if called by Mondo then don't write floppy images to disks; let Mondo do that: less irritating for user
+- if called by Mondo then do some clever tricks to add mondo-restore and its dependencies (mondo-restore is now a dynamic executable)
 - finally gotten klogd to squelch echoing of kernel msgs to console
 
@@ -599 +515 @@
 - cosmetic changes and minor bugfixes
 - excluded lilo.conf and lilo from deplist.txt; use user's copy instead
-- if your fstab mentions a RAID partition but your raidtab doesn't then
-  Mindi will terminate in a sane manner with a sane error message
+- if your fstab mentions a RAID partition but your raidtab doesn't then Mindi will terminate in a sane manner with a sane error message
 - fixed a bug in bug-me (heh, how ironic)
 - include and run (sys)klogd to try to pipe kernel msgs to logfile
@@ -611 +526 @@
 - tweaked data disk size and data disk formatting command
 - make ISO bootable image (as well as floppies) when backing up to tape
-- copy boot images (floppy + CD) from temp dir to /root/images/mindi
-  after making them, just in case the user wants them later
+- copy boot images (floppy + CD) from temp dir to /root/images/mindi after making them, just in case the user wants them later
 - added md5sum to deplist.txt
 - added pico->vi softlink to ramdisk
-- in the ramdisk's /etc/bashrc, added /usr/local/bin and
-  /usr/local/sbin to the PATH= command
-- call insert-all-modules as background task; pause 3 seconds after
-  calling it, before proceeding <--- /sbin/init
+- in the ramdisk's /etc/bashrc, added /usr/local/bin and /usr/local/sbin to the PATH= command
+- call insert-all-modules as background task; pause 3 seconds after calling it, before proceeding <--- /sbin/init
 - call to devfs has been moved to before call to post-init
 - added 'md5sum -> busybox' softlink
-- Mindi now uses busybox's printf, md5sum, mount, umount, vi
-  ...NB: I said, 'vi' :-) Now you have an editor again! :-)
+- Mindi now uses busybox's printf, md5sum, mount, umount, vi ...NB: I said, 'vi' :-) Now you have an editor again! :-)
 - added lilo.real to deplist.txt, to allow for Debian's evil new distro
 - added lzop to deplist.txt
@@ -628 +539 @@
 - improved Mindi's error-reporting a little bit
 - changed deplist.txt's /etc/* to just *
-- restructured the calls in /sbin/post-init that reinitialize the LVM
-  and RAID modules
+- restructured the calls in /sbin/post-init that reinitialize the LVM and RAID modules
 - if mkfs.ext2 is not in PATH then abort
-- Mindi uses a 'filename cache' to speed itself up at run-time
-  (Jean-David Marrow)
+- Mindi uses a 'filename cache' to speed itself up at run-time (Jean-David Marrow)
 - Red Hat 7.2 uses a weird /etc/issue.net; I've worked around it...
 - tested with Linux-Mandrake 8.0 and Red Hat 7.2
@@ -640 +549 @@
 - restructured deplist.txt a bit (cosmetic change)
 - re-enabled fsck.* in deplist.txt
-- analyze-my-lvm fails gracefully if you're not using LVM but inserted
-  the module anyway
+- analyze-my-lvm fails gracefully if you're not using LVM but inserted the module anyway
 
 v0.43 (2001-10-21)
 - made Mindi work with Red Hat 6.2 and 2.2.19 kernel
-- if mkisofs is not found, say so; don't just say, 'an error occurred
-  while I was trying to make an ISO image'
-- when formatting and writing floppies, if /dev/fd0's size is
-  indeterminable then I'll use /dev/fd0H1440 instead 
-- make sure xfs.o, jfs.o, reiserfs.o, ext2.o, ext3.o modules are
-  backed up (if they exist) to boot disks
-- fixed a silly bug that stopped Mindi from handling its own modules
-  properly; only affects newbie users with broken kernels (i.e. the
-  very people that Mindi's failsafe kernel was meant to help!)
+- if mkisofs is not found, say so; don't just say, 'an error occurred while I was trying to make an ISO image'
+- when formatting and writing floppies, if /dev/fd0's size is indeterminable then I'll use /dev/fd0H1440 instead 
+- make sure xfs.o, jfs.o, reiserfs.o, ext2.o, ext3.o modules are backed up (if they exist) to boot disks
+- fixed a silly bug that stopped Mindi from handling its own modules properly; only affects newbie users with broken kernels (i.e. the very people that Mindi's failsafe kernel was meant to help!)
 - added lzop (Marcus Oberhumer's file compressor) to aux-tools.tgz
-- added Bruno Cornec's "--cd-recovery" patch; if user uses the switch
-  (i.e. '--cd-recovery yes') then the CD will boot to a screen that
-  pauses until the user types RESTORE; then, it will enter Nuke Mode
+- added Bruno Cornec's "--cd-recovery" patch; if user uses the switch (i.e. '--cd-recovery yes') then the CD will boot to a screen that pauses until the user types RESTORE; then, it will enter Nuke Mode
 - added Stephan Zegherd's "superformat" patch
-- failsafe kernel is now 2.4.12 with XFS, JFS and lots of SCSI modules;
-  the addition of XFS and extensive SCSI support will increase the 
-  size of Mindi's RPM / tarball significantly but I think it's worth it
-- at boot-time, find out whether there are any RAID partitions; and if
-  there are, whether they are 'started' yet; if not, run raidstart to
-  start them at boot-time, before user can try to mount anything
-- Mindi's failsafe kernel & modules are handled more elegantly now;
-  if you have raid1.o, scsi.o, etc. loaded at backup-time then Mindi
-  finds its corresponding modules in its tarball of failsafe modules
-  and stores them so that at boot-time you can do SCSI, RAID, etc.
+- failsafe kernel is now 2.4.12 with XFS, JFS and lots of SCSI modules; the addition of XFS and extensive SCSI support will increase the size of Mindi's RPM / tarball significantly but I think it's worth it
+- at boot-time, find out whether there are any RAID partitions; and if there are, whether they are 'started' yet; if not, run raidstart to start them at boot-time, before user can try to mount anything
+- Mindi's failsafe kernel & modules are handled more elegantly now; if you have raid1.o, scsi.o, etc. loaded at backup-time then Mindi finds its corresponding modules in its tarball of failsafe modules and stores them so that at boot-time you can do SCSI, RAID, etc.
 - removed gawk, printf from deplist.txt
 
@@ -674 +568 @@
 - make sure lvm-mod, raid0, raid1 and raid5 modules are backed up
 - added 'you need a ramdisk' to FAQ
-- changed the slice size from 20KB to 64KB; speeds up Mindi by 25%
-  and doesn't have any negative side-effects (...that I can see)
-- when searching for your current kernel version, do not examine
-  a file if it does not exist (it sounds obvious, I know...)
-- when asking user to send me a copy of their log file, point out
-  that it may contain info which they do not want me to see but that
-  they are SOL unless I can actually see their log file
-- fixed a silly bug that would crop up when a Linux-Mandrake 8.1 user
-  would use a devfs-enabled kernel and RAID partitions at the same time
+- changed the slice size from 20KB to 64KB; speeds up Mindi by 25% and doesn't have any negative side-effects (...that I can see)
+- when searching for your current kernel version, do not examine a file if it does not exist (it sounds obvious, I know...)
+- when asking user to send me a copy of their log file, point out that it may contain info which they do not want me to see but that they are SOL unless I can actually see their log file
+- fixed a silly bug that would crop up when a Linux-Mandrake 8.1 user would use a devfs-enabled kernel and RAID partitions at the same time
 - plays nicely with devfs-enabled kernels and distros
 - data floppies are now 1.44MB each; boot floppy is still 1.72MB
 - if binutils or libbinutils is not installed, abort
-- fixed a bug which meant that some big files overwrote each other
-  at backup-time and caused library-related problems are boot-time
+- fixed a bug which meant that some big files overwrote each other at backup-time and caused library-related problems are boot-time
 - enabled comments ('#') in deplist.txt
-- disabled fsck.* in deplist.txt; user may re-enable the line if
-  s/he wants those tools available at boot-time
-- tested successfully with the following distros
-  - Linux-Mandrake 8.1 and its 2.4.8, devfs-enabled stock kernel
-  - Red Hat 7.1 and its 2.4.2 stock kernel
+- disabled fsck.* in deplist.txt; user may re-enable the line if s/he wants those tools available at boot-time
+- tested successfully with the following distros - Linux-Mandrake 8.1 and its 2.4.8, devfs-enabled stock kernel - Red Hat 7.1 and its 2.4.2 stock kernel
 - better at guessing the size of swap partition
-- drop minix tools from deplist; user can restore them if s/he wants
-  to use the minix filesystem
-- don't backup _all_ cdrom modules (if backing up 'cdrom.o'); be
-  selective! ...minor bug in ListKerneModulePaths has been fixed
-- if the user has two glibc libraries - one in /lib and one in 
-  /lib/i686 - then Mindi will re-jig the softlinks so that only the
-  version in /lib is backed up, to save space on the data disks
-- major rewrite of the code that copies the tools and libraries from
-  the data disks; prettier, faster and more stable (and did I mention
-  how kind it is to your hard-working hands?)
+- drop minix tools from deplist; user can restore them if s/he wants to use the minix filesystem
+- don't backup _all_ cdrom modules (if backing up 'cdrom.o'); be selective! ...minor bug in ListKerneModulePaths has been fixed
+- if the user has two glibc libraries - one in /lib and one in /lib/i686 - then Mindi will re-jig the softlinks so that only the version in /lib is backed up, to save space on the data disks
+- major rewrite of the code that copies the tools and libraries from the data disks; prettier, faster and more stable (and did I mention how kind it is to your hard-working hands?)
 - better handling of crazy libraries and softlinks thereto
-- new boot-time script, 'bug-me', copies user's logs to a floppy and
-  tells him/her to e-mail them to me if mondo-restore aborts
-- ignore kernels named vmlinux (note the 'X'); traditionally, kernels
-  are named vmlinuz (note the 'Z') or something similar
-- no longer backup all modules to CD/tape; just backup the ones loaded
-  at backup-time; this saves boot-time ramdisk space
+- new boot-time script, 'bug-me', copies user's logs to a floppy and tells him/her to e-mail them to me if mondo-restore aborts
+- ignore kernels named vmlinux (note the 'X'); traditionally, kernels are named vmlinuz (note the 'Z') or something similar
+- no longer backup all modules to CD/tape; just backup the ones loaded at backup-time; this saves boot-time ramdisk space
 - removed all references to LOOPDEVICE
 - LVM is supported (experimental; watch this space...)
-- included a tarball of 'sane' /dev/loop* nodes which will be extracted
-  and added to the boot disk; this helps maintain Mindi's backward- 
-  compatibility with non-devfs kernels and distros
-- when copying modules to boot or data disks, uncompress them first
-  if they are gzipped (some distros come with compressed modules)
-- no longer copies all loaded modules to the 2.88 MB El Torito bootable
-  floppy image; instead, it copies FLOPPY_MODS to the 1.72 MB image,
-  CDROM_MODS to the 2.88 MB image, and _all_ modules that were loaded
-  at backup-time to the data disks
-    - supports tape streamers, in conjunction with Mondo
+- included a tarball of 'sane' /dev/loop* nodes which will be extracted and added to the boot disk; this helps maintain Mindi's backward- compatibility with non-devfs kernels and distros
+- when copying modules to boot or data disks, uncompress them first if they are gzipped (some distros come with compressed modules)
+- no longer copies all loaded modules to the 2.88 MB El Torito bootable floppy image; instead, it copies FLOPPY_MODS to the 1.72 MB image, CDROM_MODS to the 2.88 MB image, and _all_ modules that were loaded at backup-time to the data disks - supports tape streamers, in conjunction with Mondo
 - uses busybox's sync again; let's see if that breaks anything...
-- if Mondo is backing up to tape streamer then write the tape's size to
-  /tmp/TAPESIZE and the drive's device to /tmp/TAPEDEV-LIVES-HERE on 
-  the ramdisk
-- floppy disk modules (ide-floppy.o and floppy.o) now are copied
-  to the ramdisk, whether the user's kernel or the failsafe kernel
-  is being used
+- if Mondo is backing up to tape streamer then write the tape's size to /tmp/TAPESIZE and the drive's device to /tmp/TAPEDEV-LIVES-HERE on the ramdisk
+- floppy disk modules (ide-floppy.o and floppy.o) now are copied to the ramdisk, whether the user's kernel or the failsafe kernel is being used
 
 v0.41 (2001-09-28)
@@ -736 +601 @@
 - updated Mindi's own failsafe kernel+modules to v2.4.10
 - added umount to deplist again
-- improved Mindi's support of modular kernels (esp. modular CD-ROM
-  drive and floppy disk drives)
+- improved Mindi's support of modular kernels (esp. modular CD-ROM drive and floppy disk drives)
 - don't accuse Linux 2.4.10 users of having a 'buggy kernel'
-- restored the libc5 versions of sync and umount (dropped from
-  deplist but also from busybox)
+- restored the libc5 versions of sync and umount (dropped from deplist but also from busybox)
 - fixed a lot of silly bugs related to incorporating Busybox in Mindi
 - experimental LVM support
 - added 'analyze-my-lvm' script to the tarball; Mindi uses it now
 - able to recognize & record LVM mounts, adding them to the mountlist
-- added the LVM executables (listed in the lvm-0.xx-i386.rpm) to
-  deplist.txt; they won't be added unless you have them and you won't
+- added the LVM executables (listed in the lvm-0.xx-i386.rpm) to deplist.txt; they won't be added unless you have them and you won't
       have them unless you're using LVM, so this is not 'bloat' IMO :)
 - added date and sync to deplist again
 - when working on LVM stuff, use 'echo y | pvcreate -ff' (was '..-f')
-- amended format-...-kludge to allow for mountlists with >1
-  spaces between cols
-  checked the fsck.reiserfs is in deplist.txt (yes it is)
-- incorporated busybox 0.60-1; now, Mindi is faster at run-time and
-  smaller at boot-time; you can fit a typical system onto 3 floppies;
-  also, a kernel up to 1MB in size (approx.) can now be accommodated
+- amended format-...-kludge to allow for mountlists with >1 spaces between cols checked the fsck.reiserfs is in deplist.txt (yes it is)
+- incorporated busybox 0.60-1; now, Mindi is faster at run-time and smaller at boot-time; you can fit a typical system onto 3 floppies; also, a kernel up to 1MB in size (approx.) can now be accommodated
 - supports kernels that have MODULAR support for CD-ROM's or floppies
-- Mindi copies only the loaded modules to the data disks but it copies
-  _all_ modules to the CD, just in case
-- thanks to busybox your floppy-based Mindi boot disk set should now be
-  able to accommodate a kernel of up to 1MB in size
+- Mindi copies only the loaded modules to the data disks but it copies _all_ modules to the CD, just in case
+- thanks to busybox your floppy-based Mindi boot disk set should now be able to accommodate a kernel of up to 1MB in size
 - boot into Expert Mode unless boot disk was generated by Mondo
 - exclude all softlinks from list of 'eligible' kernels
 - exclude kernels with 'vmlinux' in their names
-- removed A LOT of files from deplist.txt's dependency list; they are
-  listed in deplist.removed, in case you want to put them back :-)
-- excludes libX11, libXext, libXi, libgtk, libgdk ALWAYS, whether you
-  add them to deplist.txt or not; [cancel this by editing line 485]
+- removed A LOT of files from deplist.txt's dependency list; they are listed in deplist.removed, in case you want to put them back :-)
+- excludes libX11, libXext, libXi, libgtk, libgdk ALWAYS, whether you add them to deplist.txt or not; [cancel this by editing line 485]
 - rewrote AddFileToDir() to make it more efficient (but slower...)
-- strip chaff from binaries; strip comments from bash scripts; strip
-  comments from /etc/termcap
+- strip chaff from binaries; strip comments from bash scripts; strip comments from /etc/termcap
 
 v0.40 (2001-09-16)
-- if you use a softlink to your CD dev, e.g. /dev/cdrecorder->scd0,
-  then Mindi should handle it properly now (i.e. not bomb out)
-- if you have a large kernel & lots of modules loaded, Mindi will only
-      copy as many modules to the ramdisk as will _fit_ on a ramdisk that
-  will have to go alongside your kernel on a 2.88MB floppy disk
+- if you use a softlink to your CD dev, e.g. /dev/cdrecorder->scd0, then Mindi should handle it properly now (i.e. not bomb out)
+- if you have a large kernel & lots of modules loaded, Mindi will only copy as many modules to the ramdisk as will _fit_ on a ramdisk that will have to go alongside your kernel on a 2.88MB floppy disk
 - if your kernel does not support loopfs, Mindi will say so & abort
-- turned some warnings into fatal errors, to help the user to figure
-  out exactly why Mindi won't work on their kernel
+- turned some warnings into fatal errors, to help the user to figure out exactly why Mindi won't work on their kernel
 - changed mke2fs -N24 to -N32, to see if it helps braindead distros
 - Mondo now tells Mindi whether or not to use its stock kernel
 - gone back to the old 'insert-my-modules' for now; it's more reliable
-- working on the 'insert-all-my-modules' script, to make it compatible
-  with a wider range of insane distros and kernels
-- dropped the '-c' option from LILO call
-    - removed cdrecord, mkisofs, vi, route and diff from deplist.txt
-- slowed down the 'split data between floppies' routine; made it
-  try harder to squeeze more data onto each floppy
-- excluding nvidia modules from the "insert-all-my-modules" script
-  because it sometimes causes freeze-ups
-- added code to copy your fstab, lilo.conf, etc. to a tarball which, in
-  the event of an error, Mindi will ask the user to e-mail me
+- working on the 'insert-all-my-modules' script, to make it compatible with a wider range of insane distros and kernels
+- dropped the '-c' option from LILO call - removed cdrecord, mkisofs, vi, route and diff from deplist.txt
+- slowed down the 'split data between floppies' routine; made it try harder to squeeze more data onto each floppy
+- excluding nvidia modules from the "insert-all-my-modules" script because it sometimes causes freeze-ups
+- added code to copy your fstab, lilo.conf, etc. to a tarball which, in the event of an error, Mindi will ask the user to e-mail me
 
 v0.39 (2001-09-08)
-- plays nicely with devfs, so long as your old /dev/hdX, /dev/sdX
-  softlinks are still there :-)
-- if your swap partition isn't mounted, Mindi will decide that it is
-      125MB; it used to abort but now it just warns & makes a good guess
+- plays nicely with devfs, so long as your old /dev/hdX, /dev/sdX softlinks are still there :-)
+- if your swap partition isn't mounted, Mindi will decide that it is 125MB; it used to abort but now it just warns & makes a good guess
 - testing the failsafe kernel & associated scripts
 - only use lilo's "-c" option if NOT a 2.88MB floppy disk image
 - copes better with .o, .gz, etc. module suffixes
 - better 'loaded modules / not loaded modules' feedback at boot-time
-- semi-forces isofs and ide-cd (not isofs.o and ide-cd.o); the former
-  will be more compatible with stock kernels - e.g. Red Hat, Mandrake;
-  also added vfat, fat & a few other modules to the list of 'foced'.
-- removed the '-c' switch from the call to LILO (some BIOSes don't
-  like it very much)
+- semi-forces isofs and ide-cd (not isofs.o and ide-cd.o); the former will be more compatible with stock kernels - e.g. Red Hat, Mandrake; also added vfat, fat & a few other modules to the list of 'foced'.
+- removed the '-c' switch from the call to LILO (some BIOSes don't like it very much)
 - removed chaff from ramdisk's /etc/login.defs, saving approx 7K
 - format the boot disks with -N 24 (was -N 64)
 - do not insist on CD #1 (at boot-time) if there is no 'CD #' marker
-- amend format-and-kludge-vfat; now, it will not abort if it cannot
-  find its entry in mountlist; it doesn't need to find the entry
-  anyway, except to check that the kludge works (which it does)
-- if user chooses to use Mindi's failsafe 2.4.9 kernel, Mindi will load
-  Mindi's versions of user's modules at boot-time
+- amend format-and-kludge-vfat; now, it will not abort if it cannot find its entry in mountlist; it doesn't need to find the entry anyway, except to check that the kludge works (which it does)
+- if user chooses to use Mindi's failsafe 2.4.9 kernel, Mindi will load Mindi's versions of user's modules at boot-time
 - make label-devices-as-necessary log its efforts
 - added e2label and tune2fs to deplist.txt
-- if you boot in Normal Mode, I'll call mondo-restore --interactive
-  instead of just mondo-restore
+- if you boot in Normal Mode, I'll call mondo-restore --interactive instead of just mondo-restore
 - replaced K7-compatible 2.4.7 kernel with a 586-comp'ble 2.4.9 kernel
 - improved the post-run clean-up
-- force the copying/loading of isofs.o and ide-cd.o, which enhances
-  Mindi's support for kernels that have modular CD-ROM support
-- Interactive Mode offers to edit /tmp/mountlist.txt before running
-  mondo-restore (good idea from F. Boon)
+- force the copying/loading of isofs.o and ide-cd.o, which enhances Mindi's support for kernels that have modular CD-ROM support
+- Interactive Mode offers to edit /tmp/mountlist.txt before running mondo-restore (good idea from F. Boon)
 - /dev/hd[e-h]* have been added to the ramdisk
-- disabled Cuckoo and Bootstrap Modes (they weren't doing anything
-  anyway & were probably confusing some users)
-- removed 'edit mountlist?' question (because mondo-restore takes
-  care of that now, via a user-friendly mountlist editor)
+- disabled Cuckoo and Bootstrap Modes (they weren't doing anything anyway & were probably confusing some users)
+- removed 'edit mountlist?' question (because mondo-restore takes care of that now, via a user-friendly mountlist editor)
 - included a copy of mondo-manual.html
-- only kludge /dev/hda1 or /dev/sda1 (if vfat, of course);
-  otherwise, use regular mkfs.vfat
+- only kludge /dev/hda1 or /dev/sda1 (if vfat, of course); otherwise, use regular mkfs.vfat
 - use mkfs.dos if mkfs.vfat does not exist
 - moved some scripts from rootfs.tgz to Mondo's restore-scripts.tgz
@@ -842 +672 @@
 - updated the README to emphasize that the scripts are deprecated
 - when displaying mountlist on screen, make it easier to read
-- changed most 'echo's to 'LogIt()'s; log most screen output to
-  /var/log/mindi.log
-- user can now use a stock 2.4.7 kernel (which comes with Mindi)
-  if the user's distro's kernel isn't right for a boot disk
-
-v0.37 (2001-08-11)
-    - changed the boot screen a little bit
+- changed most 'echo's to 'LogIt()'s; log most screen output to /var/log/mindi.log
+- user can now use a stock 2.4.7 kernel (which comes with Mindi) if the user's distro's kernel isn't right for a boot disk
+
+v0.37 (2001-08-11) - changed the boot screen a little bit
 - changed the "cannot boot from CD-ROM" message (more informative now)
 - if an 'insmod'ed module cannot be found, warn but don't abort
-- that whole loop-mount/extract tgz to ramdisk thing --- if it fails,
-  abort, don't try to continue; also, ask if loopfs is supported by
-  kernel (if not, that might explain the error)
-- in addition to /lib/modules/`uname -r`/modules, also search
-  /root/oss/modules for kernel modules (Phillip Deackes)
-- run syslog and klogd at restore-time, to pipe sys & knl messages to
-  /tmp/mondo-restore.log
-- default restore-time boot mode is now 'interactive' (unless the
-  disk is a 1.72MB, in which case default mode is still 'expert')
-- if CDROM can't find itself (long story, re: El Torito) then the
-  script will say, "Your kernel is b0rken." This will reduce the
-  number of erroneous error reports that I receive from users
+- that whole loop-mount/extract tgz to ramdisk thing --- if it fails, abort, don't try to continue; also, ask if loopfs is supported by kernel (if not, that might explain the error)
+- in addition to /lib/modules/`uname -r`/modules, also search /root/oss/modules for kernel modules (Phillip Deackes)
+- run syslog and klogd at restore-time, to pipe sys & knl messages to /tmp/mondo-restore.log
+- default restore-time boot mode is now 'interactive' (unless the disk is a 1.72MB, in which case default mode is still 'expert')
+- if CDROM can't find itself (long story, re: El Torito) then the script will say, "Your kernel is b0rken." This will reduce the number of erroneous error reports that I receive from users
 - working on implementing Cuckoo Mode again
 
@@ -869 +689 @@
 - explicitily exluding /mnt/floppy and /floppy from mountlist.txt
 - warn if afio not found (Mondo needs afio)
-- optional --custom <temp dir> <out dir> switch added, to let the user
-  specify where the temp dirs and created images will be stored
-- changed /sbin/init to install modules _before_ trying to mount
-  CD-ROM (David Granz)
+- optional --custom <temp dir> <out dir> switch added, to let the user specify where the temp dirs and created images will be stored
+- changed /sbin/init to install modules _before_ trying to mount CD-ROM (David Granz)
 - create a gawk->awk shortcut at restore-time if necessary
 - specifically exclude /dev/fd0h1440 and /dev/fd0H1440 from mountlist
@@ -882 +700 @@
 - tarball/RPM no longer includes boot.b or lilo
 - mke2fs' output will be echoed to screen, if an error occurs
-- doubled the -N inode allocations and removed some of the -i inode
-  fiddles, just in case they are making Red Hat 7.1 choke
+- doubled the -N inode allocations and removed some of the -i inode fiddles, just in case they are making Red Hat 7.1 choke
 
 v0.34 (2001-07-25)
@@ -893 +710 @@
 v0.33 (2001-07-20)
 - excludes all devices containing ':/' (i.e. NFS mountlists)
-- the FORMAT/SYS replacement, "format-and-kludge-vfat" now writes
-  its logfile to /tmp/format-and-kludge-vfat.log
+- the FORMAT/SYS replacement, "format-and-kludge-vfat" now writes its logfile to /tmp/format-and-kludge-vfat.log
 - /etc/fstab now mounts floppies for read/write access by default
 - format-and-kludge-vfat should only write to log once now
@@ -901 +717 @@
 - mountlist is written to screen as well as mountlist.txt
 - tested with Linux 2.4.7; works fine
-- changed 'mkfs' lines, to format the loop-mounted files instead of the
-  device nodes which makes Mindi work better with kernels 2.4.6+
+- changed 'mkfs' lines, to format the loop-mounted files instead of the device nodes which makes Mindi work better with kernels 2.4.6+
 - Mindi can now handle kernels of up to 930K in size
-- sped up the process of spreading data files across data disks
-  by approx 20%
+- sped up the process of spreading data files across data disks by approx 20%
 
 v0.32 (2001-07-18)
@@ -912 +726 @@
 - add /etc/fstab and /etc/raidtab to deplist.txt
 - added /dev/md* to the ramdisk's /dev directory
-- modified MakeMountlist() to calculate correctly the sizes of
-  RAID partitions, if they are present in /etc/fstab
+- modified MakeMountlist() to calculate correctly the sizes of RAID partitions, if they are present in /etc/fstab
 - moved the 'LOOPDEVICE=...' code into the regular main() section
-- install-additional-tools makes a softlink '/etc/raidtab' that points
-  to /mnt/groovy-stuff/etc/raidtab; also, '/etc/fstab.orig' that points
-  to /mnt/groovy-stuff/etc/fstab
-- added line to 'install-additional-tools' that will delete the 
-  dummy modprobe before installing data from datadisk(s)
+- install-additional-tools makes a softlink '/etc/raidtab' that points to /mnt/groovy-stuff/etc/raidtab; also, '/etc/fstab.orig' that points to /mnt/groovy-stuff/etc/fstab
+- added line to 'install-additional-tools' that will delete the dummy modprobe before installing data from datadisk(s)
 - mkdir -p $outdir at the beginning, just in case...
 
-v0.31 (2001-07-16)
-    - included DoJ's patch to make Mindi play more nicely with devfs
+v0.31 (2001-07-16) - included DoJ's patch to make Mindi play more nicely with devfs
 - slightly better install.sh and README
 
@@ -932 +741 @@
 
 v0.29 (2001-07-14)
-- stopped the 'modprobe' errors that used to occur at the beginning;
-  they didn't mean anything but they did worry some novice users
+- stopped the 'modprobe' errors that used to occur at the beginning; they didn't mean anything but they did worry some novice users
 - removed losetup from rootfs.tgz (wasn't doing anything useful)
 - removed the 'txt-or-gui' stuff from Mindi (never used it anyway)
 - added clear to deplist.txt
-- moved rootfs.tgz's "mondo/" scripts to Mondo's "restore-scripts.tgz"
-  tarball; tarball will be untarred and contents added to the 
-  data disks at run-time, if Mindi finds the tarball
+- moved rootfs.tgz's "mondo/" scripts to Mondo's "restore-scripts.tgz" tarball; tarball will be untarred and contents added to the data disks at run-time, if Mindi finds the tarball
 - if user lacks fd0u1722 but has fd0h1722 then use the latter
 - boot-up msg is more informative
 - fixed obscure bug in find-and-mount-cdrom
-- better at coping with hda1/2/3/4 (normal people use hda1/5/6/7 but
-  if you really want to exhaust your primaries, well hey, your life)
+- better at coping with hda1/2/3/4 (normal people use hda1/5/6/7 but if you really want to exhaust your primaries, well hey, your life)
 - the 'outstring sucks!' message is now more informative
 
 v0.28 (2001-07-07)
-- if AddFileToDir() is called with a file that does not exist, Mindi
-  warns but does not abort
-- should work with gzipped modules (which end in '.o.gz') and
-  NVidia modules (which don't end in anything)
+- if AddFileToDir() is called with a file that does not exist, Mindi warns but does not abort
+- should work with gzipped modules (which end in '.o.gz') and NVidia modules (which don't end in anything)
 - should work with Red Hat's issue.net now
-- misc. cosmetic changes to Mondo boot-time and restore-phase scripts,
-  to make the visual output cleaner & more legible
-- insist-on-cd retracts the CD tray after asking for next CD, in case
-  the user did not close the drive before pressing <enter>
+- misc. cosmetic changes to Mondo boot-time and restore-phase scripts, to make the visual output cleaner & more legible
+- insist-on-cd retracts the CD tray after asking for next CD, in case the user did not close the drive before pressing <enter>
 - if unable to create 1.72MB boot disk then warn but do not abort
 - put creation date on the boot-up screen
-- create data disks with tarballs up to 1700KB in size; tries harder
-  to fill each data disk to the brim
-- changed the call to make ext3 partitions; now, it uses a call to
-  mkfs -t ext3 -j -Jsize=10 -q <device> (as requested by ext3 manual)
+- create data disks with tarballs up to 1700KB in size; tries harder to fill each data disk to the brim
+- changed the call to make ext3 partitions; now, it uses a call to mkfs -t ext3 -j -Jsize=10 -q <device> (as requested by ext3 manual)
 - tested w/ext3; works fine
-- install-additional-tools doesn't call sync until after all softlinks
-  have been finalized; that's to make sure we call the _right_ sync
+- install-additional-tools doesn't call sync until after all softlinks have been finalized; that's to make sure we call the _right_ sync
 - ramdisk is now (size of all files in data disks PLUS 8192) KB
 - RPM and SRPM published
 - mount CDROM at start of untar-me, just in case it wasn't mounted
-- when restoring selectively, log the archives that have matches
-  & the number of matches (inc. if zero)
+- when restoring selectively, log the archives that have matches & the number of matches (inc. if zero)
 
 v0.26 (2001-07-05)
 - has been tested with XFS, JFS, ReiserFS, ext2 and vfat
 - compatible (but not tested) with ext3
-- better at finding your kernel, even if you have several kernels
-  of the same version (now checks the build date, too)
+- better at finding your kernel, even if you have several kernels of the same version (now checks the build date, too)
 - better file-spreading algorithm; a little faster; much more reliable
 - includes a copy of LILO, to make the boot disks properly
@@ -982 +778 @@
 - compare-me uses 'insist-on-cd' instead of internal subroutine
 - it looks as if Mindi can actually cope with 920K kernels now :)
-- fixed some silly multi-CD bugs that would stop big files from being
-  restored if they were spread across CD's
+- fixed some silly multi-CD bugs that would stop big files from being restored if they were spread across CD's
 
 v0.25 (2001-07-04)
@@ -992 +787 @@
 - replace all libc5 tools with libc6 (user's) tools at restore-time
 - added diff to deplist.txt
-- copy io.sys and msdos.sys (if found) to data disk(s) at
-  run-time; softlinks them to /*.sys at boot-time
-- fixed some vfat formatting-related issues w/Embleer (always tricky);
-  the kludge's error-handling is better and its exit is more graceful
+- copy io.sys and msdos.sys (if found) to data disk(s) at run-time; softlinks them to /*.sys at boot-time
+- fixed some vfat formatting-related issues w/Embleer (always tricky); the kludge's error-handling is better and its exit is more graceful
 - say 'type nuke to restore automatically' in msg if Mondo called me
-- backup all modules, not just the ones present/loaded at run-time;
-  the loaded modules go on boot disk but ALL go on data disk
+- backup all modules, not just the ones present/loaded at run-time; the loaded modules go on boot disk but ALL go on data disk
 - reduced the max data per disk from 1700 to 1680, to suit ext2's needs
 - DidMondoCallMe() replaces 'ps ax | grep | blah blah'
@@ -1010 +802 @@
 - generates lilo.conf on-the-fly; no default/template file anymore
 - copies io.sys and msdos.sys to the CD (if you have them)
-- add the embleer tarballs to mindi-0.xx.tgz, so that users can
-  format and make bootable msdos/Win9x partitions
+- add the embleer tarballs to mindi-0.xx.tgz, so that users can format and make bootable msdos/Win9x partitions
 - added printf and hdparm to deplist.txt
 - incorporated Bruno Cornec's Mondo 0.991 scripts in Mindi
@@ -1036 +827 @@
 - don't add a ramdisk; use rootfs & that's it
 - dependency-calculator runs approx. twice as fast as in v0.20
-- tested with Linux Mandrake 8.0; works well, if you recompile
-  kernel to include floppy disk support (which LM8's kernel does not)
+- tested with Linux Mandrake 8.0; works well, if you recompile kernel to include floppy disk support (which LM8's kernel does not)
 - supports bigger kernels now, up to 900K in size
 - deplist.txt may now include directories, not just files
@@ -1045 +835 @@
 - copies user's /dev/fd0* devices to boot disk
 - calls Mindi's copy of syslinux, not user's copy
-- use modules' paths, e.g. instead of just 'insmod fubar', use
-  'insmod /lib/modules/2.4.5-ac117/vfat/fubar.o'
-- in boot.msg, XXXXX is part 1 of the 2nd line, YYYYY is part 2 of
-  the 2nd line, and ZZZZZ is Mindi's version# (in the 1st line)
+- use modules' paths, e.g. instead of just 'insmod fubar', use 'insmod /lib/modules/2.4.5-ac117/vfat/fubar.o'
+- in boot.msg, XXXXX is part 1 of the 2nd line, YYYYY is part 2 of the 2nd line, and ZZZZZ is Mindi's version# (in the 1st line)
 
 v0.21 (2001-06-30)