Changeset 3107 for branches/3.0/mindi


Ignore:
Timestamp:
May 5, 2013, 4:23:30 AM (6 years ago)
Author:
bruno
Message:
 
Location:
branches/3.0/mindi
Files:
3 edited

Legend:

Unmodified
Added
Removed
  • branches/3.0/mindi/README.pxe

    r3098 r3107  
    1111label mondo
    1212        kernel vmlinuz-mondo
    13         append initrd=initrd-mondo load_ramdisk=1 prompt_ramdisk=0 ramdisk_size=131072 selinux=0 rw root=/dev/ram iso acpi=off apm=off devfs=nomount exec-shield=0 pxe [proto=nfs|sshfs|smbfs] [prefix=machine] [ipconf=(ipdev:ipadr:netmask:broadcast:gateway|ipdev:dhcp)] [hwaddr=M:A:C:A:D:R] [netfsmount=server:mountpoint] [netfsopt=-o option][netfspath=local_path] [ping=#] ...
     13        append initrd=initrd-mondo load_ramdisk=1 prompt_ramdisk=0 ramdisk_size=131072 selinux=0 rw root=/dev/ram iso acpi=off apm=off devfs=nomount exec-shield=0 pxe [proto=nfs|sshfs] [prefix=machine] [ipconf=(ipdev:ipadr:netmask:broadcast:gateway|ipdev:dhcp)] [hwaddr=M:A:C:A:D:R] [netfsmount=server:mountpoint] [netfsopt=-o option][netfspath=local_path] [ping=#] ...
    1414
    1515ipdev is the device name (e.g. eth2)
     
    2020dhcp is a keyword. Using it will provide all the previous 4 values to activate the LAN interface.
    2121hwaddr is the MAC address of the device you want to use to restore through
    22 proto is the protocol to use for mounting the remote share (default is NFS, sshfs and smbfs are also available)
     22proto is the protocol to use for mounting the remote share (default is NFS, sshfs is also available)
    2323server is the ip addr of the Remote Network server
    2424mountpoint is the mount point on the Remote Network server to use (if NFS, should be in /etc/exports of the NFS server)
  • branches/3.0/mindi/mindi

    r3103 r3107  
    756756
    757757    # say where we are.
    758     LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
     758    LogFile "INFO:   GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
    759759
    760760    # verify that file exists
    761761    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
    762762
    763     # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
     763    # Kernel may be gzip compressed
    764764    file $lvKernelImage 2>&1 | grep -q gzip
    765765    if [ $? -eq 0 ]; then
    766         LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
    767         lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
    768     else
    769         LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
    770         # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
    771         # get offet of gzip magic "1f8b0800" in file (for these older kernels)
    772         lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
    773         if [ $lvOffset -eq 0 ]; then
    774             LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
    775             lvScanRes=$lcMagicInitfs
     766        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs"`
     767
     768        # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
     769        if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
     770            lvUseFilesystem="ext2fs"
     771        elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
     772            lvUseFilesystem="ext3fs"
     773        elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
     774            lvUseFilesystem="initramfs"
     775        elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
     776            lvUseFilesystem="cramfs"
    776777        else
    777             lvOffset=`expr $lvOffset / 2`
    778             LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
    779             # scan again  kernel image
    780             lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
    781         fi
    782     fi
    783 
    784     # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
    785     if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
    786         lvUseFilesystem="ext2fs"
    787     elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
    788         lvUseFilesystem="ext3fs"
    789     elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
     778            lvUseFilesystem="UNSUPPORTED"
     779        fi
     780
     781    else
     782        # In that case, we are after 2.6.30 and use the supported initramfs
    790783        lvUseFilesystem="initramfs"
    791     elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
    792         lvUseFilesystem="cramfs"
    793     else
    794         # In that case, we are most probably after 2.6.30 and use the supported initramfs
    795         LogFile "No automatic detection found previously. Supposing initramfs."
    796         LogFile "Report on the MondoRescue mailing-list withyour log files"
    797         lvUseFilesystem="initramfs"
    798     fi
    799 
     784    fi
    800785    # say what we are using
    801     LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
     786    LogFile "INFO:   GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
    802787
    803788    # return file system to use
     
    937922    file="$1"
    938923
    939     while [ `echo $file | grep -Ec '\.\./'` -ne 0 ]; do
     924    echo $file | grep -q '\.\./'
     925    if [ $? -eq 0 ]; then
    940926        # We need to normalise the path with .. in it
    941         file=`echo $file | perl -pi -e 's|([^/]*)/([^/]+)/\.\./([^/]+)|$1/$3|g'`
    942     done
     927        file=`echo $file | perl -pi -e 's|([^/]+)/([^/]+)/\.\./([^/]+)|$1/$3|'`
     928    fi
    943929    echo "$file"
    944930    if [ ! -h $file ]; then
     
    18181804    for i in $options ; do
    18191805        ooo=$i
    1820         [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
     1806        [ "$ooo" = "RESTORE" ] && ooo="nuke"
    18211807        if [ "$type" = "elilo" ]; then
    18221808            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
     
    26022588        fi
    26032589    done
    2604     tar cf - $finallist 2>> $MINDI_TMP/$$.log | tar xUf - || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
     2590    tar cf - $finallist 2>> $MINDI_TMP/$$.log | tar xUf - || LogIt "ERROR: Problem in minimal analysis" $MINDI_TMP/$$.log
    26052591
    26062592    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
     
    32453231
    32463232for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
    3247     modinfo $i 2> /dev/null 1> /dev/null
     3233    modinfo 2> /dev/null 1> /dev/null
    32483234    if [ $? -eq 0 ]; then
    32493235        modprobe $i 2>&1 > /dev/null
  • branches/3.0/mindi/rootfs/sbin/start-netfs

    r3098 r3107  
    104104        ln -sf /dev/console /dev/tty
    105105        sshfs -o ro,StrictHostKeyChecking=no $netfsopt $netfsmount /tmp/isodir
    106     elif [ "$proto" = "smbfs" ]; then
    107         LogIt "Mounting SMBFS share ($netfsmount) on /tmp/isodir..."
    108         mount -t cifs $netfsopt $netfsmount /tmp/isodir -o ro
    109106    elif [ "$proto" != "" ]; then
    110107        if [ -x /sbin/rpcbind ]; then
Note: See TracChangeset for help on using the changeset viewer.