Changeset 2725 in MondoRescue for branches/2.2.9/mindi-busybox/miscutils/Config.in
- Timestamp:
- Feb 25, 2011, 9:26:54 PM (13 years ago)
- File:
-
- 1 edited
Legend:
- Unmodified
- Added
- Removed
-
branches/2.2.9/mindi-busybox/miscutils/Config.in
r1765 r2725 1 # DO NOT EDIT. This file is generated from Config.src 1 2 # 2 3 # For a description of the syntax of this configuration file, … … 6 7 menu "Miscellaneous Utilities" 7 8 9 config CONSPY 10 bool "conspy" 11 default n 12 depends on PLATFORM_LINUX 13 help 14 A text-mode VNC like program for Linux virtual terminals. 15 example: conspy NUM shared access to console num 16 or conspy -nd NUM screenshot of console num 17 or conspy -cs NUM poor man's GNU screen like 18 config NANDWRITE 19 bool "nandwrite" 20 default n 21 depends on PLATFORM_LINUX 22 help 23 Write to the specified MTD device, with bad blocks awareness 24 25 config NANDDUMP 26 bool "nanddump" 27 default n 28 depends on PLATFORM_LINUX 29 help 30 Dump the content of raw NAND chip 31 config UBIATTACH 32 bool "ubiattach" 33 default n 34 depends on PLATFORM_LINUX 35 help 36 Attach MTD device to an UBI device. 37 38 config UBIDETACH 39 bool "ubidetach" 40 default n 41 depends on PLATFORM_LINUX 42 help 43 Detach MTD device from an UBI device. 44 8 45 config ADJTIMEX 9 46 bool "adjtimex" 10 default n 47 default y 48 depends on PLATFORM_LINUX 11 49 help 12 50 Adjtimex reads and optionally sets adjustment parameters for … … 20 58 busybox was built. 21 59 60 config FEATURE_COMPRESS_BBCONFIG 61 bool "Compress bbconfig data" 62 default y 63 depends on BBCONFIG 64 help 65 Store bbconfig data in compressed form, uncompress them on-the-fly 66 before output. 67 68 If you have a really tiny busybox with few applets enabled (and 69 bunzip2 isn't one of them), the overhead of the decompressor might 70 be noticeable. Also, if you run executables directly from ROM 71 and have very little memory, this might not be a win. Otherwise, 72 you probably want this. 73 74 config BEEP 75 bool "beep" 76 default y 77 depends on PLATFORM_LINUX 78 help 79 The beep applets beeps in a given freq/Hz. 80 81 config FEATURE_BEEP_FREQ 82 int "default frequency" 83 range 0 2147483647 84 default 4000 85 depends on BEEP 86 help 87 Frequency for default beep. 88 89 config FEATURE_BEEP_LENGTH_MS 90 int "default length" 91 range 0 2147483647 92 default 30 93 depends on BEEP 94 help 95 Length in ms for default beep. 96 97 config CHAT 98 bool "chat" 99 default y 100 help 101 Simple chat utility. 102 103 config FEATURE_CHAT_NOFAIL 104 bool "Enable NOFAIL expect strings" 105 depends on CHAT 106 default y 107 help 108 When enabled expect strings which are started with a dash trigger 109 no-fail mode. That is when expectation is not met within timeout 110 the script is not terminated but sends next SEND string and waits 111 for next EXPECT string. This allows to compose far more flexible 112 scripts. 113 114 config FEATURE_CHAT_TTY_HIFI 115 bool "Force STDIN to be a TTY" 116 depends on CHAT 117 default n 118 help 119 Original chat always treats STDIN as a TTY device and sets for it 120 so-called raw mode. This option turns on such behaviour. 121 122 config FEATURE_CHAT_IMPLICIT_CR 123 bool "Enable implicit Carriage Return" 124 depends on CHAT 125 default y 126 help 127 When enabled make chat to terminate all SEND strings with a "\r" 128 unless "\c" is met anywhere in the string. 129 130 config FEATURE_CHAT_SWALLOW_OPTS 131 bool "Swallow options" 132 depends on CHAT 133 default y 134 help 135 Busybox chat require no options. To make it not fail when used 136 in place of original chat (which has a bunch of options) turn 137 this on. 138 139 config FEATURE_CHAT_SEND_ESCAPES 140 bool "Support weird SEND escapes" 141 depends on CHAT 142 default y 143 help 144 Original chat uses some escape sequences in SEND arguments which 145 are not sent to device but rather performs special actions. 146 E.g. "\K" means to send a break sequence to device. 147 "\d" delays execution for a second, "\p" -- for a 1/100 of second. 148 Before turning this option on think twice: do you really need them? 149 150 config FEATURE_CHAT_VAR_ABORT_LEN 151 bool "Support variable-length ABORT conditions" 152 depends on CHAT 153 default y 154 help 155 Original chat uses fixed 50-bytes length ABORT conditions. Say N here. 156 157 config FEATURE_CHAT_CLR_ABORT 158 bool "Support revoking of ABORT conditions" 159 depends on CHAT 160 default y 161 help 162 Support CLR_ABORT directive. 163 22 164 config CHRT 23 165 bool "chrt" 24 default n166 default y 25 167 help 26 168 manipulate real-time attributes of a process. … … 29 171 config CROND 30 172 bool "crond" 31 default n 32 select FEATURE_SUID 173 default y 33 174 select FEATURE_SYSLOG 34 175 help 35 176 Crond is a background daemon that parses individual crontab 36 177 files and executes commands on behalf of the users in question. 37 This is a port of dcron from slackware. 178 This is a port of dcron from slackware. It uses files of the 38 179 format /var/spool/cron/crontabs/<username> files, for example: 39 180 $ cat /var/spool/cron/crontabs/root 40 181 # Run daily cron jobs at 4:40 every day: 41 182 40 4 * * * /etc/cron/daily > /dev/null 2>&1 183 184 config FEATURE_CROND_D 185 bool "Support option -d to redirect output to stderr" 186 depends on CROND 187 default y 188 help 189 -d sets loglevel to 0 (most verbose) and directs all output to stderr. 190 191 config FEATURE_CROND_CALL_SENDMAIL 192 bool "Report command output via email (using sendmail)" 193 default y 194 depends on CROND 195 help 196 Command output will be sent to corresponding user via email. 197 198 config FEATURE_CROND_DIR 199 string "crond spool directory" 200 default "/var/spool/cron" 201 depends on CROND || CRONTAB 202 help 203 Location of crond spool. 204 205 config CRONTAB 206 bool "crontab" 207 default y 208 help 209 Crontab manipulates the crontab for a particular user. Only 210 the superuser may specify a different user and/or crontab directory. 42 211 Note that Busybox binary must be setuid root for this applet to 43 212 work properly. 44 213 45 config DEBUG_CROND_OPTION46 bool "Support debug option -d"47 depends on CROND48 default n49 help50 Support option -d to enter debug mode.51 52 config FEATURE_CROND_CALL_SENDMAIL53 bool "Using /usr/sbin/sendmail?"54 default n55 depends on CROND56 help57 Support calling /usr/sbin/sendmail for send cmd outputs.58 59 config CRONTAB60 bool "crontab"61 default n62 select FEATURE_SUID63 help64 Crontab manipulates the crontab for a particular user. Only65 the superuser may specify a different user and/or crontab directory.66 67 214 config DC 68 215 bool "dc" 69 default n216 default y 70 217 help 71 218 Dc is a reverse-polish desk calculator which supports unlimited 72 219 precision arithmetic. 73 220 221 config FEATURE_DC_LIBM 222 bool "Enable power and exp functions (requires libm)" 223 default y 224 depends on DC 225 help 226 Enable power and exp functions. 227 NOTE: This will require libm to be present for linking. 228 74 229 config DEVFSD 75 230 bool "devfsd (obsolete)" 76 231 default n 232 depends on PLATFORM_LINUX 77 233 select FEATURE_SYSLOG 78 234 help 79 This is deprecated, and will be removed at the end of 2008. 235 This is deprecated and should NOT be used anymore. 236 Use linux >= 2.6 (optionally with hotplug) and mdev instead! 237 See docs/mdev.txt for detailed instructions on how to use mdev 238 instead. 80 239 81 240 Provides compatibility with old device names on a devfs systems. … … 86 245 "MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT". 87 246 88 247 But only if they are written UPPERCASE!!!!!!!! 89 248 90 249 config DEVFSD_MODLOAD 91 250 bool "Adds support for MODLOAD keyword in devsfd.conf" 92 default n251 default y 93 252 depends on DEVFSD 94 253 help … … 98 257 config DEVFSD_FG_NP 99 258 bool "Enables the -fg and -np options" 100 default n259 default y 101 260 depends on DEVFSD 102 261 help 103 -fg Run the daemon in the foreground. 104 -np Exit after parsing the configuration file. Do not poll for events. 262 -fg Run the daemon in the foreground. 263 -np Exit after parsing the configuration file. 264 Do not poll for events. 105 265 106 266 config DEVFSD_VERBOSE 107 267 bool "Increases logging (and size)" 108 default n268 default y 109 269 depends on DEVFSD 110 270 help … … 112 272 113 273 config FEATURE_DEVFS 114 bool " Use devfs names for all devices (obsolete)" 115 default n 116 help 117 This is obsolete and will be going away at the end of 2008.. 118 119 This tells busybox to look for names like /dev/loop/0 instead of 120 /dev/loop0. If your /dev directory has normal names instead of 274 bool "Use devfs names for all devices (obsolete)" 275 default n 276 depends on PLATFORM_LINUX 277 help 278 This is obsolete and should NOT be used anymore. 279 Use linux >= 2.6 (optionally with hotplug) and mdev instead! 280 281 For legacy systems -- if there is no way around devfsd -- this 282 tells busybox to look for names like /dev/loop/0 instead of 283 /dev/loop0. If your /dev directory has normal names instead of 121 284 devfs names, you don't want this. 285 286 config DEVMEM 287 bool "devmem" 288 default y 289 help 290 devmem is a small program that reads and writes from physical 291 memory using /dev/mem. 122 292 123 293 config EJECT 124 294 bool "eject" 125 default n 126 help 127 Used to eject cdroms. (defaults to /dev/cdrom) 295 default y 296 depends on PLATFORM_LINUX 297 help 298 Used to eject cdroms. (defaults to /dev/cdrom) 299 300 config FEATURE_EJECT_SCSI 301 bool "SCSI support" 302 default y 303 depends on EJECT 304 help 305 Add the -s option to eject, this allows to eject SCSI-Devices and 306 usb-storage devices. 307 308 config FBSPLASH 309 bool "fbsplash" 310 default y 311 depends on PLATFORM_LINUX 312 help 313 Shows splash image and progress bar on framebuffer device. 314 Can be used during boot phase of an embedded device. ~2kb. 315 Usage: 316 - use kernel option 'vga=xxx' or otherwise enable fb device. 317 - put somewhere fbsplash.cfg file and an image in .ppm format. 318 - $ setsid fbsplash [params] & 319 -c: hide cursor 320 -d /dev/fbN: framebuffer device (if not /dev/fb0) 321 -s path_to_image_file (can be "-" for stdin) 322 -i path_to_cfg_file (can be "-" for stdin) 323 -f path_to_fifo (can be "-" for stdin) 324 - if you want to run it only in presence of kernel parameter: 325 grep -q "fbsplash=on" </proc/cmdline && setsid fbsplash [params] & 326 - commands for fifo: 327 "NN" (ASCII decimal number) - percentage to show on progress bar 328 "exit" - well you guessed it 329 330 config FLASHCP 331 bool "flashcp" 332 default n # doesn't build on Ubuntu 8.04 333 help 334 The flashcp binary, inspired by mtd-utils as of git head 5eceb74f7. 335 This utility is used to copy images into a MTD device. 336 337 config FLASH_LOCK 338 bool "flash_lock" 339 default n # doesn't build on Ubuntu 8.04 340 help 341 The flash_lock binary from mtd-utils as of git head 5ec0c10d0. This 342 utility locks part or all of the flash device. 343 344 config FLASH_UNLOCK 345 bool "flash_unlock" 346 default n # doesn't build on Ubuntu 8.04 347 help 348 The flash_unlock binary from mtd-utils as of git head 5ec0c10d0. This 349 utility unlocks part or all of the flash device. 350 351 config FLASH_ERASEALL 352 bool "flash_eraseall" 353 default n # doesn't build on Ubuntu 8.04 354 help 355 The flash_eraseall binary from mtd-utils as of git head c4c6a59eb. 356 This utility is used to erase the whole MTD device. 357 358 config IONICE 359 bool "ionice" 360 default y 361 depends on PLATFORM_LINUX 362 help 363 Set/set program io scheduling class and priority 364 Requires kernel >= 2.6.13 365 366 config INOTIFYD 367 bool "inotifyd" 368 default n # doesn't build on Knoppix 5 369 help 370 Simple inotify daemon. Reports filesystem changes. Requires 371 kernel >= 2.6.13 128 372 129 373 config LAST 130 374 bool "last" 131 default n132 selectFEATURE_WTMP375 default y 376 depends on FEATURE_WTMP 133 377 help 134 378 'last' displays a list of the last users that logged into the system. 379 380 choice 381 prompt "Choose last implementation" 382 depends on LAST 383 default FEATURE_LAST_FANCY 384 385 config FEATURE_LAST_SMALL 386 bool "small" 387 help 388 This is a small version of last with just the basic set of 389 features. 390 391 config FEATURE_LAST_FANCY 392 bool "huge" 393 help 394 'last' displays detailed information about the last users that 395 logged into the system (mimics sysvinit last). +900 bytes. 396 endchoice 135 397 136 398 config LESS 137 399 bool "less" 138 default n400 default y 139 401 help 140 402 'less' is a pager, meaning that it displays text files. It possesses … … 164 426 The -m flag enables a simpler status line with a percentage. 165 427 166 config FEATURE_LESS_FLAGCS167 bool "Enable flag changes"168 default n169 depends on LESS170 help171 This enables the ability to change command-line flags within172 less itself.173 174 428 config FEATURE_LESS_MARKS 175 429 bool "Enable marks" 176 default n430 default y 177 431 depends on LESS 178 432 help … … 181 435 config FEATURE_LESS_REGEXP 182 436 bool "Enable regular expressions" 183 default n437 default y 184 438 depends on LESS 185 439 help 186 440 Enable regular expressions, allowing complex file searches. 441 442 config FEATURE_LESS_WINCH 443 bool "Enable automatic resizing on window size changes" 444 default y 445 depends on LESS 446 help 447 Makes less track window size changes. 448 449 config FEATURE_LESS_DASHCMD 450 bool "Enable flag changes ('-' command)" 451 default y 452 depends on LESS 453 help 454 This enables the ability to change command-line flags within 455 less itself ('-' keyboard command). 456 457 config FEATURE_LESS_LINENUMS 458 bool "Enable dynamic switching of line numbers" 459 default y 460 depends on FEATURE_LESS_DASHCMD 461 help 462 Enables "-N" command. 187 463 188 464 config HDPARM 189 465 bool "hdparm" 190 default n 191 help 192 Get/Set hard drive parameters. Primarily intended for ATA 193 drives. Adds about 13k (or around 30k if you enable the 466 default y 467 depends on PLATFORM_LINUX 468 help 469 Get/Set hard drive parameters. Primarily intended for ATA 470 drives. Adds about 13k (or around 30k if you enable the 194 471 FEATURE_HDPARM_GET_IDENTITY option).... 195 472 … … 206 483 config FEATURE_HDPARM_HDIO_SCAN_HWIF 207 484 bool "Register an IDE interface (DANGEROUS)" 208 default n485 default y 209 486 depends on HDPARM 210 487 help … … 214 491 config FEATURE_HDPARM_HDIO_UNREGISTER_HWIF 215 492 bool "Un-register an IDE interface (DANGEROUS)" 216 default n493 default y 217 494 depends on HDPARM 218 495 help … … 221 498 222 499 config FEATURE_HDPARM_HDIO_DRIVE_RESET 223 bool " perform device reset (DANGEROUS)"224 default n500 bool "Perform device reset (DANGEROUS)" 501 default y 225 502 depends on HDPARM 226 503 help … … 229 506 230 507 config FEATURE_HDPARM_HDIO_TRISTATE_HWIF 231 bool " tristate device for hotswap (DANGEROUS)"232 default n508 bool "Tristate device for hotswap (DANGEROUS)" 509 default y 233 510 depends on HDPARM 234 511 help 235 512 Enables the 'hdparm -x' option to tristate device for hotswap, 236 and the '-b' option to get/set bus state. 513 and the '-b' option to get/set bus state. This is dangerous 237 514 stuff, so you should probably say N. 238 515 239 516 config FEATURE_HDPARM_HDIO_GETSET_DMA 240 bool " get/set using_dma flag (DANGEROUS)"241 default n517 bool "Get/set using_dma flag" 518 default y 242 519 depends on HDPARM 243 520 help 244 521 Enables the 'hdparm -d' option to get/set using_dma flag. 245 This is dangerous stuff, so you should probably say N.246 522 247 523 config MAKEDEVS 248 524 bool "makedevs" 249 default n525 default y 250 526 help 251 527 'makedevs' is a utility used to create a batch of devices with 252 528 one command. 253 . 529 254 530 There are two choices for command line behaviour, the interface 255 531 as used by LEAF/Linux Router Project, or a device table file. 256 . 532 257 533 'leaf' is traditionally what busybox follows, it allows multiple 258 534 devices of a particluar type to be created per command. 259 535 e.g. /dev/hda[0-9] 260 536 Device properties are passed as command line arguments. 261 . 537 262 538 'table' reads device properties from a file or stdin, allowing 263 539 a batch of unrelated devices to be made with one command. … … 277 553 endchoice 278 554 555 config MAN 556 bool "man" 557 default y 558 help 559 Format and display manual pages. 560 561 config MICROCOM 562 bool "microcom" 563 default y 564 help 565 The poor man's minicom utility for chatting with serial port devices. 566 279 567 config MOUNTPOINT 280 568 bool "mountpoint" 281 default n569 default y 282 570 help 283 571 mountpoint checks if the directory is a mountpoint. … … 285 573 config MT 286 574 bool "mt" 287 default n288 help 289 mt is used to control tape devices. 575 default y 576 help 577 mt is used to control tape devices. You can use the mt utility 290 578 to advance or rewind a tape past a specified number of archive 291 579 files on the tape. … … 293 581 config RAIDAUTORUN 294 582 bool "raidautorun" 295 default n 583 default y 584 depends on PLATFORM_LINUX 296 585 help 297 586 raidautorun tells the kernel md driver to … … 300 589 config READAHEAD 301 590 bool "readahead" 302 default n303 depends on LFS 591 default y 592 depends on LFS && PLATFORM_LINUX 304 593 help 305 594 Preload the files listed on the command line into RAM cache so that … … 308 597 This applet just calls the readahead(2) system call on each file. 309 598 It is mainly useful in system startup scripts to preload files 310 or executables before they are used. 311 (in particular when a CPU bound process is running) it can599 or executables before they are used. When used at the right time 600 (in particular when a CPU bound process is running) it can 312 601 significantly speed up system startup. 313 602 … … 315 604 run this applet as a background job. 316 605 606 config RFKILL 607 bool "rfkill" 608 default n # doesn't build on Ubuntu 9.04 609 depends on PLATFORM_LINUX 610 help 611 Enable/disable wireless devices. 612 613 rfkill list : list all wireless devices 614 rfkill list bluetooth : list all bluetooth devices 615 rfkill list 1 : list device corresponding to the given index 616 rfkill block|unblock wlan : block/unblock all wlan(wifi) devices 617 317 618 config RUNLEVEL 318 619 bool "runlevel" 319 default n620 default y 320 621 help 321 622 find the current and previous system runlevel. … … 326 627 config RX 327 628 bool "rx" 328 default n 629 default y 630 depends on PLATFORM_LINUX 329 631 help 330 632 Receive files using the Xmodem protocol. 633 634 config SETSID 635 bool "setsid" 636 default y 637 help 638 setsid runs a program in a new session 331 639 332 640 config STRINGS 333 641 bool "strings" 334 default n642 default y 335 643 help 336 644 strings prints the printable character sequences for each file 337 645 specified. 338 646 339 config SETSID340 bool "setsid"341 default n342 help343 setsid runs a program in a new session344 345 647 config TASKSET 346 648 bool "taskset" 347 default n 649 default n # doesn't build on some non-x86 targets (m68k) 348 650 help 349 651 Retrieve or set a processes's CPU affinity. … … 351 653 352 654 config FEATURE_TASKSET_FANCY 353 bool " fancy output"655 bool "Fancy output" 354 656 default y 355 657 depends on TASKSET … … 361 663 config TIME 362 664 bool "time" 363 default n665 default y 364 666 help 365 667 The time command runs the specified program with the given arguments. … … 367 669 giving timing statistics about this program run. 368 670 671 config TIMEOUT 672 bool "timeout" 673 default y 674 help 675 Runs a program and watches it. If it does not terminate in 676 specified number of seconds, it is sent a signal. 677 369 678 config TTYSIZE 370 679 bool "ttysize" 371 default n680 default y 372 681 help 373 682 A replacement for "stty size". Unlike stty, can report only width, 374 only height, or both, in any order. It also does not complain on error, 375 but returns default 80x24. Usage in shell scripts: width=`ttysize w`. 683 only height, or both, in any order. It also does not complain on 684 error, but returns default 80x24. 685 Usage in shell scripts: width=`ttysize w`. 686 687 config VOLNAME 688 bool "volname" 689 default y 690 help 691 Prints a CD-ROM volume name. 692 693 config WALL 694 bool "wall" 695 default y 696 help 697 Write a message to all users that are logged in. 376 698 377 699 config WATCHDOG 378 700 bool "watchdog" 379 default n 701 default y 702 depends on PLATFORM_LINUX 380 703 help 381 704 The watchdog utility is used with hardware or software watchdog 382 device drivers. 383 and periodically writes a magic character to the device. 705 device drivers. It opens the specified watchdog device special file 706 and periodically writes a magic character to the device. If the 384 707 watchdog applet ever fails to write the magic character within a 385 708 certain amount of time, the watchdog device assumes the system has … … 387 710 388 711 endmenu 389
Note:
See TracChangeset
for help on using the changeset viewer.