Changeset 2725 in MondoRescue for branches/2.2.9/mindi-busybox/examples/udhcp/udhcpd.conf
- Timestamp:
- Feb 25, 2011, 9:26:54 PM (13 years ago)
- File:
-
- 1 edited
Legend:
- Unmodified
- Added
- Removed
-
branches/2.2.9/mindi-busybox/examples/udhcp/udhcpd.conf
r1765 r2725 1 1 # Sample udhcpd configuration file (/etc/udhcpd.conf) 2 # Values shown are defaults 2 3 3 4 # The start and end of the IP lease block 4 5 start 192.168.0.20 #default: 192.168.0.20 6 end 192.168.0.254 #default: 192.168.0.254 7 5 start 192.168.0.20 6 end 192.168.0.254 8 7 9 8 # The interface that udhcpd will use 9 interface eth0 10 10 11 interface eth0 #default: eth0 12 13 14 # The maximim number of leases (includes addressesd reserved 15 # by OFFER's, DECLINE's, and ARP conficts 16 17 #max_leases 254 #default: 254 18 19 20 # If remaining is true (default), udhcpd will store the time 21 # remaining for each lease in the udhcpd leases file. This is 22 # for embedded systems that cannot keep time between reboots. 23 # If you set remaining to no, the absolute time that the lease 24 # expires at will be stored in the dhcpd.leases file. 25 26 #remaining yes #default: yes 27 11 # The maximum number of leases (includes addresses reserved 12 # by OFFER's, DECLINE's, and ARP conflicts). Will be corrected 13 # if it's bigger than IP lease block, but it ok to make it 14 # smaller than lease block. 15 #max_leases 254 28 16 29 17 # The time period at which udhcpd will write out a dhcpd.leases 30 18 # file. If this is 0, udhcpd will never automatically write a 31 # lease file. (specified in seconds) 19 # lease file. Specified in seconds. 20 #auto_time 7200 32 21 33 #auto_time 7200 #default: 7200 (2 hours) 22 # The amount of time that an IP will be reserved (leased to nobody) 23 # if a DHCP decline message is received (seconds) 24 #decline_time 3600 34 25 26 # The amount of time that an IP will be reserved 27 # if an ARP conflict occurs (seconds) 28 #conflict_time 3600 35 29 36 # The amount of time that an IP will be reserved (leased) for if a37 # DHCP decline message is received (seconds).30 # How long an offered address is reserved (seconds) 31 #offer_time 60 38 32 39 #decline_time 3600 #default: 3600 (1 hour) 40 41 42 # The amount of time that an IP will be reserved (leased) for if an 43 # ARP conflct occurs. (seconds 44 45 #conflict_time 3600 #default: 3600 (1 hour) 46 47 48 # How long an offered address is reserved (leased) in seconds 49 50 #offer_time 60 #default: 60 (1 minute) 51 52 # If a lease to be given is below this value, the full lease time is 53 # instead used (seconds). 54 55 #min_lease 60 #defult: 60 56 33 # If client asks for lease below this value, it will be rounded up 34 # to this value (seconds) 35 #min_lease 60 57 36 58 37 # The location of the leases file 59 60 #lease_file /var/lib/misc/udhcpd.leases #defualt: /var/lib/misc/udhcpd.leases 38 #lease_file /var/lib/misc/udhcpd.leases 61 39 62 40 # The location of the pid file 63 #pidfile /var/run/udhcpd.pid #default: /var/run/udhcpd.pid41 #pidfile /var/run/udhcpd.pid 64 42 65 # Everytime udhcpd writes a leases file, the below script will be called. 66 # Useful for writing the lease file to flash every few hours. 43 # Every time udhcpd writes a leases file, the below script will be called 44 #notify_file # default: no script 45 #notify_file dumpleases # useful for debugging 67 46 68 #notify_file #default: (no script) 69 70 #notify_file dumpleases # <--- useful for debugging 71 72 # The following are bootp specific options, setable by udhcpd. 73 74 #siaddr 192.168.0.22 #default: 0.0.0.0 75 76 #sname zorak #default: (none) 77 78 #boot_file /var/nfs_root #default: (none) 79 80 # The remainer of options are DHCP options and can be specifed with the 81 # keyword 'opt' or 'option'. If an option can take multiple items, such 82 # as the dns option, they can be listed on the same line, or multiple 83 # lines. The only option with a default is 'lease'. 84 85 #Examles 86 opt dns 192.168.10.2 192.168.10.10 87 option subnet 255.255.255.0 88 opt router 192.168.10.2 89 opt wins 192.168.10.10 90 option dns 129.219.13.81 # appened to above DNS servers for a total of 3 91 option domain local 92 option lease 864000 # 10 days of seconds 93 94 95 # Currently supported options, for more info, see options.c 96 #opt subnet 97 #opt timezone 98 #opt router 99 #opt timesvr 100 #opt namesvr 101 #opt dns 102 #opt logsvr 103 #opt cookiesvr 104 #opt lprsvr 105 #opt bootsize 106 #opt domain 107 #opt swapsvr 108 #opt rootpath 109 #opt ipttl 110 #opt mtu 111 #opt broadcast 112 #opt wins 113 #opt lease 114 #opt ntpsrv 115 #opt tftp 116 #opt bootfile 117 47 # The following are bootp specific options 48 # next server to use in bootstrap 49 #siaddr 192.168.0.22 # default: 0.0.0.0 (none) 50 # tftp server name 51 #sname zorak # default: none 52 # tftp file to download (e.g. kernel image) 53 #boot_file /var/nfs_root # default: none 118 54 119 55 # Static leases map … … 121 57 #static_lease 00:60:08:11:CE:3E 192.168.0.44 122 58 59 # The remainder of options are DHCP options and can be specified with the 60 # keyword 'opt' or 'option'. If an option can take multiple items, such 61 # as the dns option, they can be listed on the same line, or multiple 62 # lines. 63 # Examples: 64 opt dns 192.168.10.2 192.168.10.10 65 option subnet 255.255.255.0 66 opt router 192.168.10.2 67 opt wins 192.168.10.10 68 option dns 129.219.13.81 # appended to above DNS servers for a total of 3 69 option domain local 70 option lease 864000 # default: 10 days 71 # Arbitrary option in hex form: 72 option 0x08 01020304 # option 8: "cookie server IP addr: 1.2.3.4" 123 73 74 # Currently supported options (for more info, see options.c): 75 #opt lease NUM 76 #opt subnet IP 77 #opt broadcast IP 78 #opt router IP_LIST 79 #opt ipttl NUM 80 #opt mtu NUM 81 #opt hostname STRING # client's hostname 82 #opt domain STRING # client's domain suffix 83 #opt search STRING_LIST # search domains 84 #opt nisdomain STRING 85 #opt timezone NUM # (localtime - UTC_time) in seconds. signed 86 #opt tftp STRING # tftp server name 87 #opt bootfile STRING # tftp file to download (e.g. kernel image) 88 #opt bootsize NUM # size of that file 89 #opt rootpath STRING # (NFS) path to mount as root fs 90 #opt wpad STRING 91 #opt serverid IP # default: server's IP 92 #opt message STRING # error message (udhcpd sends it on success too) 93 # Options specifying server(s) 94 #opt dns IP_LIST 95 #opt wins IP_LIST 96 #opt nissrv IP_LIST 97 #opt ntpsrv IP_LIST 98 #opt lprsrv IP_LIST 99 #opt swapsrv IP 100 # Obsolete options, no longer supported 101 #opt logsrv IP_LIST # 704/UDP log server (not syslog!) 102 #opt namesrv IP_LIST # IEN 116 name server, obsolete (August 1979!!!) 103 #opt cookiesrv IP_LIST # RFC 865 "quote of the day" server, rarely (never?) used 104 #opt timesrv IP_LIST # RFC 868 time server, rarely (never?) used
Note:
See TracChangeset
for help on using the changeset viewer.