Nov 6, 2007, 11:01:53 AM (13 years ago)
Bruno Cornec
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <arnaud.tiger_at_hp.com>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod? silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian? keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René? Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

1 edited


  • branches/stable/mindi-busybox/networking/udhcp/options.h

    r821 r1770  
     1/* vi: set sw=4 ts=4: */
    12/* options.h */
    23#ifndef _OPTIONS_H
    34#define _OPTIONS_H
    5 #include "packet.h"
    76#define TYPE_MASK   0x0F
    1110    OPTION_IP_PAIR,
    1211    OPTION_STRING,
     12#if ENABLE_FEATURE_RFC3397
     13    OPTION_STR1035, /* RFC1035 compressed domain name list */
    1315    OPTION_BOOLEAN,
    1416    OPTION_U8,
    2224#define OPTION_LIST 0x20 /* There can be a list of 1 or more of these */
     27/* Do not modify below here unless you know what you are doing!! */
     30/* DHCP protocol -- see RFC 2131 */
     31#define SERVER_PORT     67
     32#define CLIENT_PORT     68
     34#define DHCP_MAGIC      0x63825363
     36/* DHCP option codes (partial list) */
     37#define DHCP_PADDING        0x00
     38#define DHCP_SUBNET     0x01
     39#define DHCP_TIME_OFFSET    0x02
     40#define DHCP_ROUTER     0x03
     41#define DHCP_TIME_SERVER    0x04
     42#define DHCP_NAME_SERVER    0x05
     43#define DHCP_DNS_SERVER     0x06
     44#define DHCP_LOG_SERVER     0x07
     45#define DHCP_COOKIE_SERVER  0x08
     46#define DHCP_LPR_SERVER     0x09
     47#define DHCP_HOST_NAME      0x0c
     48#define DHCP_BOOT_SIZE      0x0d
     49#define DHCP_DOMAIN_NAME    0x0f
     50#define DHCP_SWAP_SERVER    0x10
     51#define DHCP_ROOT_PATH      0x11
     52#define DHCP_IP_TTL     0x17
     53#define DHCP_MTU        0x1a
     54#define DHCP_BROADCAST      0x1c
     55#define DHCP_NTP_SERVER     0x2a
     56#define DHCP_WINS_SERVER    0x2c
     57#define DHCP_REQUESTED_IP   0x32
     58#define DHCP_LEASE_TIME     0x33
     59#define DHCP_OPTION_OVER    0x34
     60#define DHCP_MESSAGE_TYPE   0x35
     61#define DHCP_SERVER_ID      0x36
     62#define DHCP_PARAM_REQ      0x37
     63#define DHCP_MESSAGE        0x38
     64#define DHCP_MAX_SIZE       0x39
     65#define DHCP_T1         0x3a
     66#define DHCP_T2         0x3b
     67#define DHCP_VENDOR     0x3c
     68#define DHCP_CLIENT_ID      0x3d
     69#define DHCP_FQDN       0x51
     71#define DHCP_END        0xFF
     74#define BOOTREQUEST     1
     75#define BOOTREPLY       2
     77#define ETH_10MB        1
     78#define ETH_10MB_LEN        6
     80#define DHCPDISCOVER        1
     81#define DHCPOFFER       2
     82#define DHCPREQUEST     3
     83#define DHCPDECLINE     4
     84#define DHCPACK         5
     85#define DHCPNAK         6
     86#define DHCPRELEASE     7
     87#define DHCPINFORM      8
     89#define BROADCAST_FLAG      0x8000
     91#define OPTION_FIELD        0
     92#define FILE_FIELD      1
     93#define SNAME_FIELD     2
     95/* miscellaneous defines */
     96#define OPT_CODE 0
     97#define OPT_LEN 1
     98#define OPT_DATA 2
    24100struct dhcp_option {
    25     char name[10];
     101    char name[12];
    26102    char flags;
    27103    uint8_t code;
    30 extern struct dhcp_option dhcp_options[];
    31 extern int option_lengths[];
     106extern const struct dhcp_option dhcp_options[];
     107extern const unsigned char option_lengths[];
    33109uint8_t *get_option(struct dhcpMessage *packet, int code);
    35111int add_option_string(uint8_t *optionptr, uint8_t *string);
    36112int add_simple_option(uint8_t *optionptr, uint8_t code, uint32_t data);
     113#if ENABLE_FEATURE_RFC3397
     114char *dname_dec(const uint8_t *cstr, int clen, const char *pre);
     115uint8_t *dname_enc(const uint8_t *cstr, int clen, const char *src, int *retlen);
Note: See TracChangeset for help on using the changeset viewer.