Ignore:
Timestamp:
Nov 6, 2007, 11:01:53 AM (16 years ago)
Author:
Bruno Cornec
Message:
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <arnaud.tiger_at_hp.com>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

File:
1 edited

Legend:

Unmodified
Added
Removed
  • branches/stable/mindi-busybox/loginutils/su.c

    r821 r1770  
    11/* vi: set sw=4 ts=4: */
    22/*
    3    Licensed under the GPL v2, see the file LICENSE in this tarball.
    4 */
     3 *  Mini su implementation for busybox
     4 *
     5 *  Licensed under the GPL v2 or later, see the file LICENSE in this tarball.
     6 */
    57
    6 #include <fcntl.h>
    7 #include <signal.h>
    8 #include <stdio.h>
    9 #include <stdlib.h>
    10 #include <string.h>
     8#include "libbb.h"
    119#include <syslog.h>
    12 #include <termios.h>
    13 #include <unistd.h>
    14 #include <utmp.h>
    15 #include <sys/resource.h>
    16 #include <sys/stat.h>
    17 #include <sys/types.h>
    18 #include <ctype.h>
    19 #include <time.h>
    2010
    21 #include "busybox.h"
     11#define SU_OPT_mp (3)
     12#define SU_OPT_l (4)
    2213
    23 /* The shell to run if none is given in the user's passwd entry.  */
    24 #ifndef DEFAULT_SHELL
    25 #define DEFAULT_SHELL "/bin/sh"
    26 #endif
    27 
    28 /* Default user.  */
    29 #define DEFAULT_USER  "root"
    30 
    31 /* #define SYSLOG_SUCCESS */
    32 #define SYSLOG_FAILURE
    33 
    34 
    35 #if defined( SYSLOG_SUCCESS ) || defined( SYSLOG_FAILURE )
    36 /* Log the fact that someone has run su */
    37 
    38 # if defined( SYSLOG_SUCCESS ) && defined( SYSLOG_FAILURE )
    39 static void log_su (const char *successful, const char *old_user,
    40                     const char *tty)
     14int su_main(int argc, char **argv);
     15int su_main(int argc, char **argv)
    4116{
    42     syslog ( LOG_NOTICE, "%s%s on %s", successful, old_user, tty);
    43 }
    44 #  define log_su_successful(cu, u, tty) if(!cu) log_su("", u, tty)
    45 #  define log_su_failure(cu, u, tty)    if(!cu) log_su("FAILED SU ", u, tty)
    46 # else
    47     /* partial logging */
    48 #  if !defined( SYSLOG_SUCESS )
    49 #   define log_su_successful(cu, u, tty)
    50 #   define log_su_failure(cu, u, t) if(!cu) \
    51             syslog(LOG_NOTICE, "FAILED SU %s on %s", u, t)
    52 #  else
    53 #   define log_su_successful(cu, u, t) if(!cu) \
    54             syslog(LOG_NOTICE, "%s on %s", u, t)
    55 #   define log_su_failure(cu, u, tty)
    56 #  endif
    57 # endif
    58 #else
    59     /* logging not used */
    60 # define log_su_successful(cu, u, tty)
    61 # define log_su_failure(cu, u, tty)
    62 #endif
    63 
    64 
    65 int su_main ( int argc, char **argv )
    66 {
    67     unsigned long flags;
    68     char *opt_shell = 0;
    69     char *opt_command = 0;
    70     char *opt_username = DEFAULT_USER;
    71     char **opt_args = 0;
     17    unsigned flags;
     18    char *opt_shell = NULL;
     19    char *opt_command = NULL;
     20    const char *opt_username = "root";
    7221    struct passwd *pw;
    7322    uid_t cur_uid = getuid();
     23    const char *tty;
     24    char *old_user;
    7425
    75 #if defined( SYSLOG_SUCCESS ) || defined( SYSLOG_FAILURE )
    76     const char *tty;
    77     const char *old_user;
    78 #endif
     26    flags = getopt32(argv, "mplc:s:", &opt_command, &opt_shell);
     27    argc -= optind;
     28    argv += optind;
    7929
    80     flags = bb_getopt_ulflags(argc, argv, "mplc:s:",
    81                           &opt_command, &opt_shell);
    82 #define SU_OPT_m (3)
    83 #define SU_OPT_p (3)
    84 #define SU_OPT_l (4)
    85 
    86     if (optind < argc  && argv[optind][0] == '-' && argv[optind][1] == 0) {
     30    if (argc && LONE_DASH(argv[0])) {
    8731        flags |= SU_OPT_l;
    88         ++optind;
    89     }
     32        argc--;
     33        argv++;
     34    }
    9035
    9136    /* get user if specified */
    92     if ( optind < argc )
    93         opt_username = argv [optind++];
     37    if (argc) {
     38        opt_username = argv[0];
     39//      argc--;
     40        argv++;
     41    }
    9442
    95     if ( optind < argc )
    96         opt_args = argv + optind;
     43    if (ENABLE_FEATURE_SU_SYSLOG) {
     44        /* The utmp entry (via getlogin) is probably the best way to identify
     45        the user, especially if someone su's from a su-shell.
     46        But getlogin can fail -- usually due to lack of utmp entry.
     47        in this case resort to getpwuid.  */
     48        old_user = xstrdup(USE_FEATURE_UTMP(getlogin() ? : ) (pw = getpwuid(cur_uid)) ? pw->pw_name : "");
     49        tty = ttyname(2) ? : "none";
     50        openlog(applet_name, 0, LOG_AUTH);
     51    }
    9752
    98 #if defined( SYSLOG_SUCCESS ) || defined( SYSLOG_FAILURE )
    99 #ifdef CONFIG_FEATURE_UTMP
    100     /* The utmp entry (via getlogin) is probably the best way to identify
    101        the user, especially if someone su's from a su-shell.  */
    102     old_user = getlogin ( );
    103     if ( !old_user )
    104 #endif
    105         {
    106         /* getlogin can fail -- usually due to lack of utmp entry.
    107            Resort to getpwuid.  */
    108         pw = getpwuid ( cur_uid );
    109         old_user = ( pw ? pw->pw_name : "" );
    110     }
    111     tty = ttyname ( 2 );
    112     if(!tty)
    113         tty = "none";
    114 
    115     openlog ( bb_applet_name, 0, LOG_AUTH );
    116 #endif
    117 
    118     pw = getpwnam ( opt_username );
    119     if ( !pw )
    120         bb_error_msg_and_die ( "user %s does not exist", opt_username );
     53    pw = getpwnam(opt_username);
     54    if (!pw)
     55        bb_error_msg_and_die("unknown id: %s", opt_username);
    12156
    12257    /* Make sure pw->pw_shell is non-NULL.  It may be NULL when NEW_USER
    12358       is a username that is retrieved via NIS (YP), but that doesn't have
    12459       a default shell listed.  */
    125     if ( !pw->pw_shell || !pw->pw_shell [0] )
    126         pw->pw_shell = (char *) DEFAULT_SHELL;
     60    if (!pw->pw_shell || !pw->pw_shell[0])
     61        pw->pw_shell = (char *)DEFAULT_SHELL;
    12762
    128     if ((( cur_uid == 0 ) || correct_password ( pw ))) {
    129         log_su_successful(pw->pw_uid, old_user, tty );
     63    if ((cur_uid == 0) || correct_password(pw)) {
     64        if (ENABLE_FEATURE_SU_SYSLOG)
     65            syslog(LOG_NOTICE, "%c %s %s:%s",
     66                '+', tty, old_user, opt_username);
    13067    } else {
    131         log_su_failure (pw->pw_uid, old_user, tty );
    132         bb_error_msg_and_die ( "incorrect password" );
     68        if (ENABLE_FEATURE_SU_SYSLOG)
     69            syslog(LOG_NOTICE, "%c %s %s:%s",
     70                '-', tty, old_user, opt_username);
     71        bb_error_msg_and_die("incorrect password");
    13372    }
    13473
    135 #if defined( SYSLOG_SUCCESS ) || defined( SYSLOG_FAILURE )
    136     closelog();
    137 #endif
     74    if (ENABLE_FEATURE_CLEAN_UP && ENABLE_FEATURE_SU_SYSLOG) {
     75        closelog();
     76        free(old_user);
     77    }
    13878
    139     if ( !opt_shell && (flags & SU_OPT_p))
    140         opt_shell = getenv ( "SHELL" );
     79    if (!opt_shell && (flags & SU_OPT_mp))
     80        opt_shell = getenv("SHELL");
    14181
    142     if ( opt_shell && cur_uid && restricted_shell ( pw->pw_shell )) {
     82#if ENABLE_FEATURE_SU_CHECKS_SHELLS
     83    if (opt_shell && cur_uid && restricted_shell(pw->pw_shell)) {
    14384        /* The user being su'd to has a nonstandard shell, and so is
    14485           probably a uucp account or has restricted access.  Don't
    14586           compromise the account by allowing access with a standard
    14687           shell.  */
    147         fputs ( "using restricted shell\n", stderr );
     88        bb_error_msg("using restricted shell");
    14889        opt_shell = 0;
    14990    }
    150 
    151     if ( !opt_shell )
     91#endif
     92    if (!opt_shell)
    15293        opt_shell = pw->pw_shell;
    15394
    154     change_identity ( pw );
    155     setup_environment(opt_shell, flags & SU_OPT_l, !(flags & SU_OPT_p), pw);
    156 #if ENABLE_SELINUX
    157        set_current_security_context(NULL);
    158 #endif
    159     run_shell(opt_shell, flags & SU_OPT_l, opt_command, (const char**)opt_args);
     95    change_identity(pw);
     96    setup_environment(opt_shell, flags & SU_OPT_l, !(flags & SU_OPT_mp), pw);
     97    USE_SELINUX(set_current_security_context(NULL);)
     98
     99    /* Never returns */
     100    run_shell(opt_shell, flags & SU_OPT_l, opt_command, (const char**)argv);
    160101
    161102    return EXIT_FAILURE;
Note: See TracChangeset for help on using the changeset viewer.