Ignore:
Timestamp:
Nov 6, 2007, 11:01:53 AM (13 years ago)
Author:
Bruno Cornec
Message:
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <arnaud.tiger_at_hp.com>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod? silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian? keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René? Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

File:
1 edited

Legend:

Unmodified
Added
Removed
  • branches/stable/mindi-busybox/debianutils/start_stop_daemon.c

    r821 r1770  
    44 *
    55 * Written by Marek Michalkiewicz <marekm@i17linuxb.ists.pwr.wroc.pl>,
    6  * public domain.
    76 * Adapted for busybox David Kimdon <dwhedon@gordian.com>
     7 *
     8 * Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
    89 */
    910
    10 #include "busybox.h"
    11 #include <stdio.h>
    12 #include <stdlib.h>
    13 #include <string.h>
    14 #include <stdarg.h>
    15 #include <signal.h>
    16 #include <errno.h>
    17 #include <sys/stat.h>
    18 #include <dirent.h>
    19 #include <unistd.h>
    20 #include <getopt.h> /* struct option */
    21 #include "pwd_.h"
     11/* NB: we have a problem here with /proc/NN/exe usage, similar to
     12 * one fixed in killall/pidof */
     13
     14#include <getopt.h>
     15#include <sys/resource.h>
     16
     17/* Override ENABLE_FEATURE_PIDFILE */
     18#define WANT_PIDFILE 1
     19#include "libbb.h"
    2220
    2321static int signal_nr = 15;
    2422static int user_id = -1;
    25 static int quiet;
    26 static char *userspec = NULL;
    27 static char *cmdname = NULL;
    28 static char *execname = NULL;
    29 static char *pidfile = NULL;
     23static char *userspec;
     24static char *cmdname;
     25static char *execname;
     26static char *pidfile;
     27static smallint quiet;
    3028
    3129struct pid_list {
     
    3432};
    3533
    36 static struct pid_list *found = NULL;
    37 
    38 static inline void push(pid_t pid)
     34static struct pid_list *found;
     35
     36static int pid_is_exec(pid_t pid, const char *name)
     37{
     38    char buf[sizeof("/proc//exe") + sizeof(int)*3];
     39    char *execbuf;
     40    int n;
     41
     42    sprintf(buf, "/proc/%u/exe", pid);
     43    n = strlen(name) + 1;
     44    execbuf = xzalloc(n + 1);
     45    readlink(buf, execbuf, n);
     46
     47    /* if readlink fails, execbuf still contains "" */
     48    n = strcmp(execbuf, name);
     49    if (ENABLE_FEATURE_CLEAN_UP)
     50        free(execbuf);
     51    return !n; /* nonzero (true) if execbuf == name */
     52}
     53
     54static int pid_is_user(int pid, int uid)
     55{
     56    struct stat sb;
     57    char buf[sizeof("/proc/") + sizeof(int)*3];
     58
     59    sprintf(buf, "/proc/%u", pid);
     60    if (stat(buf, &sb) != 0)
     61        return 0;
     62    return (sb.st_uid == uid);
     63}
     64
     65static int pid_is_cmd(pid_t pid, const char *name)
     66{
     67    char fname[sizeof("/proc//stat") + sizeof(int)*3];
     68    char *buf;
     69    int r = 0;
     70
     71    sprintf(fname, "/proc/%u/stat", pid);
     72    buf = xmalloc_open_read_close(fname, NULL);
     73    if (buf) {
     74        char *p = strchr(buf, '(');
     75        if (p) {
     76            char *pe = strrchr(++p, ')');
     77            if (pe) {
     78                *pe = '\0';
     79                r = !strcmp(p, name);
     80            }
     81        }
     82        free(buf);
     83    }
     84    return r;
     85}
     86
     87static void check(int pid)
    3988{
    4089    struct pid_list *p;
    4190
     91    if (execname && !pid_is_exec(pid, execname)) {
     92        return;
     93    }
     94    if (userspec && !pid_is_user(pid, user_id)) {
     95        return;
     96    }
     97    if (cmdname && !pid_is_cmd(pid, cmdname)) {
     98        return;
     99    }
    42100    p = xmalloc(sizeof(*p));
    43101    p->next = found;
     
    46104}
    47105
    48 static int pid_is_exec(pid_t pid, const char *name)
    49 {
    50     char buf[32];
    51     struct stat sb, exec_stat;
    52 
    53     if (name)
    54         xstat(name, &exec_stat);
    55 
    56     sprintf(buf, "/proc/%d/exe", pid);
    57     if (stat(buf, &sb) != 0)
    58         return 0;
    59     return (sb.st_dev == exec_stat.st_dev && sb.st_ino == exec_stat.st_ino);
    60 }
    61 
    62 static int pid_is_user(int pid, int uid)
    63 {
    64     struct stat sb;
    65     char buf[32];
    66 
    67     sprintf(buf, "/proc/%d", pid);
    68     if (stat(buf, &sb) != 0)
    69         return 0;
    70     return (sb.st_uid == uid);
    71 }
    72 
    73 static int pid_is_cmd(pid_t pid, const char *name)
    74 {
    75     char buf[32];
     106static void do_pidfile(void)
     107{
    76108    FILE *f;
    77     int c;
    78 
    79     sprintf(buf, "/proc/%d/stat", pid);
    80     f = fopen(buf, "r");
    81     if (!f)
    82         return 0;
    83     while ((c = getc(f)) != EOF && c != '(')
    84         ;
    85     if (c != '(') {
    86         fclose(f);
    87         return 0;
    88     }
    89     /* this hopefully handles command names containing ')' */
    90     while ((c = getc(f)) != EOF && c == *name)
    91         name++;
    92     fclose(f);
    93     return (c == ')' && *name == '\0');
    94 }
    95 
    96 
    97 static void check(int pid)
    98 {
    99     if (execname && !pid_is_exec(pid, execname)) {
    100         return;
    101     }
    102     if (userspec && !pid_is_user(pid, user_id)) {
    103         return;
    104     }
    105     if (cmdname && !pid_is_cmd(pid, cmdname)) {
    106         return;
    107     }
    108     push(pid);
    109 }
    110 
    111 
    112 static void do_pidfile(void)
    113 {
    114     FILE *f;
    115     pid_t pid;
     109    unsigned pid;
    116110
    117111    f = fopen(pidfile, "r");
    118112    if (f) {
    119         if (fscanf(f, "%d", &pid) == 1)
     113        if (fscanf(f, "%u", &pid) == 1)
    120114            check(pid);
    121115        fclose(f);
    122116    } else if (errno != ENOENT)
    123117        bb_perror_msg_and_die("open pidfile %s", pidfile);
    124 
    125118}
    126119
     
    136129    }
    137130
    138     procdir = bb_xopendir("/proc");
     131    procdir = xopendir("/proc");
    139132
    140133    foundany = 0;
    141134    while ((entry = readdir(procdir)) != NULL) {
    142         if (sscanf(entry->d_name, "%d", &pid) != 1)
     135        pid = bb_strtou(entry->d_name, NULL, 10);
     136        if (errno)
    143137            continue;
    144138        foundany++;
     
    147141    closedir(procdir);
    148142    if (!foundany)
    149         bb_error_msg_and_die ("nothing in /proc - not mounted?");
    150 }
    151 
     143        bb_error_msg_and_die("nothing in /proc - not mounted?");
     144}
    152145
    153146static int do_stop(void)
    154147{
    155     RESERVE_CONFIG_BUFFER(what, 1024);
     148    char *what;
    156149    struct pid_list *p;
    157150    int killed = 0;
     
    159152    do_procinit();
    160153
    161     if (cmdname)
    162         strcpy(what, cmdname);
    163     else if (execname)
    164         strcpy(what, execname);
    165     else if (pidfile)
    166         sprintf(what, "process in pidfile `%.200s'", pidfile);
     154    if (cmdname) {
     155        if (ENABLE_FEATURE_CLEAN_UP) what = xstrdup(cmdname);
     156        if (!ENABLE_FEATURE_CLEAN_UP) what = cmdname;
     157    } else if (execname) {
     158        if (ENABLE_FEATURE_CLEAN_UP) what = xstrdup(execname);
     159        if (!ENABLE_FEATURE_CLEAN_UP) what = execname;
     160    } else if (pidfile)
     161        what = xasprintf("process in pidfile '%s'", pidfile);
    167162    else if (userspec)
    168         sprintf(what, "process(es) owned by `%s'", userspec);
     163        what = xasprintf("process(es) owned by '%s'", userspec);
    169164    else
    170         bb_error_msg_and_die ("internal error, please report");
     165        bb_error_msg_and_die("internal error, please report");
    171166
    172167    if (!found) {
    173168        if (!quiet)
    174             printf("no %s found; none killed.\n", what);
    175         if (ENABLE_FEATURE_CLEAN_UP)
    176             RELEASE_CONFIG_BUFFER(what);
    177         return -1;
     169            printf("no %s found; none killed\n", what);
     170        killed = -1;
     171        goto ret;
    178172    }
    179173    for (p = found; p; p = p->next) {
    180174        if (kill(p->pid, signal_nr) == 0) {
    181             p->pid = -p->pid;
     175            p->pid = - p->pid;
    182176            killed++;
    183177        } else {
    184             bb_perror_msg("warning: failed to kill %d", p->pid);
     178            bb_perror_msg("warning: killing process %u", p->pid);
    185179        }
    186180    }
     
    188182        printf("stopped %s (pid", what);
    189183        for (p = found; p; p = p->next)
    190             if(p->pid < 0)
    191                 printf(" %d", -p->pid);
    192         printf(").\n");
    193     }
     184            if (p->pid < 0)
     185                printf(" %u", - p->pid);
     186        puts(")");
     187    }
     188 ret:
    194189    if (ENABLE_FEATURE_CLEAN_UP)
    195         RELEASE_CONFIG_BUFFER(what);
     190        free(what);
    196191    return killed;
    197192}
    198193
    199194#if ENABLE_FEATURE_START_STOP_DAEMON_LONG_OPTIONS
    200 static const struct option ssd_long_options[] = {
    201     { "stop",           0,      NULL,       'K' },
    202     { "start",          0,      NULL,       'S' },
    203     { "background",     0,      NULL,       'b' },
    204     { "quiet",          0,      NULL,       'q' },
    205     { "make-pidfile",   0,      NULL,       'm' },
     195static const char start_stop_daemon_longopts[] ALIGN1 =
     196    "stop\0"         No_argument       "K"
     197    "start\0"        No_argument       "S"
     198    "background\0"   No_argument       "b"
     199    "quiet\0"        No_argument       "q"
     200    "make-pidfile\0" No_argument       "m"
    206201#if ENABLE_FEATURE_START_STOP_DAEMON_FANCY
    207     { "oknodo",         0,      NULL,       'o' },
    208     { "verbose",        0,      NULL,       'v' },
    209 #endif
    210     { "startas",        1,      NULL,       'a' },
    211     { "name",           1,      NULL,       'n' },
    212     { "signal",         1,      NULL,       's' },
    213     { "user",           1,      NULL,       'u' },
    214     { "exec",           1,      NULL,       'x' },
    215     { "pidfile",        1,      NULL,       'p' },
     202    "oknodo\0"       No_argument       "o"
     203    "verbose\0"      No_argument       "v"
     204    "nicelevel\0"    Required_argument "N"
     205#endif
     206    "startas\0"      Required_argument "a"
     207    "name\0"         Required_argument "n"
     208    "signal\0"       Required_argument "s"
     209    "user\0"         Required_argument "u"
     210    "chuid\0"        Required_argument "c"
     211    "exec\0"         Required_argument "x"
     212    "pidfile\0"      Required_argument "p"
    216213#if ENABLE_FEATURE_START_STOP_DAEMON_FANCY
    217     { "retry",          1,      NULL,       'R' },
    218 #endif
    219     { 0,                0,      0,      0 }
     214    "retry\0"        Required_argument "R"
     215#endif
     216    ;
     217#endif
     218
     219enum {
     220    CTX_STOP       = 0x1,
     221    CTX_START      = 0x2,
     222    OPT_BACKGROUND = 0x4, // -b
     223    OPT_QUIET      = 0x8, // -q
     224    OPT_MAKEPID    = 0x10, // -m
     225    OPT_a          = 0x20, // -a
     226    OPT_n          = 0x40, // -n
     227    OPT_s          = 0x80, // -s
     228    OPT_u          = 0x100, // -u
     229    OPT_c          = 0x200, // -c
     230    OPT_x          = 0x400, // -x
     231    OPT_p          = 0x800, // -p
     232    OPT_OKNODO     = 0x1000 * ENABLE_FEATURE_START_STOP_DAEMON_FANCY, // -o
     233    OPT_VERBOSE    = 0x2000 * ENABLE_FEATURE_START_STOP_DAEMON_FANCY, // -v
     234    OPT_NICELEVEL  = 0x4000 * ENABLE_FEATURE_START_STOP_DAEMON_FANCY, // -N
    220235};
    221 #endif
    222 
    223 #define SSD_CTX_STOP        1
    224 #define SSD_CTX_START       2
    225 #define SSD_OPT_BACKGROUND  4
    226 #define SSD_OPT_QUIET       8
    227 #define SSD_OPT_MAKEPID     16
    228 #if ENABLE_FEATURE_START_STOP_DAEMON_FANCY
    229 #define SSD_OPT_OKNODO      32
    230 #define SSD_OPT_VERBOSE     64
    231 
    232 #endif
    233 
     236
     237int start_stop_daemon_main(int argc, char **argv);
    234238int start_stop_daemon_main(int argc, char **argv)
    235239{
    236     unsigned long opt;
    237     char *signame = NULL;
    238     char *startas = NULL;
     240    unsigned opt;
     241    char *signame;
     242    char *startas;
     243    char *chuid;
    239244#if ENABLE_FEATURE_START_STOP_DAEMON_FANCY
    240245//  char *retry_arg = NULL;
    241246//  int retries = -1;
     247    char *opt_N;
    242248#endif
    243249#if ENABLE_FEATURE_START_STOP_DAEMON_LONG_OPTIONS
    244     bb_applet_long_options = ssd_long_options;
     250    applet_long_options = start_stop_daemon_longopts;
    245251#endif
    246252
    247253    /* Check required one context option was given */
    248     bb_opt_complementally = "K:S:?:K--S:S--K:m?p:K?xpun:S?xa";
    249     opt = bb_getopt_ulflags(argc, argv, "KSbqm"
    250 //      USE_FEATURE_START_STOP_DAEMON_FANCY("ovR:")
    251         USE_FEATURE_START_STOP_DAEMON_FANCY("ov")
    252         "a:n:s:u:x:p:"
     254    opt_complementary = "K:S:K--S:S--K:m?p:K?xpun:S?xa";
     255    opt = getopt32(argv, "KSbqma:n:s:u:c:x:p:"
     256        USE_FEATURE_START_STOP_DAEMON_FANCY("ovN:"),
     257//      USE_FEATURE_START_STOP_DAEMON_FANCY("ovN:R:"),
     258        &startas, &cmdname, &signame, &userspec, &chuid, &execname, &pidfile
     259        USE_FEATURE_START_STOP_DAEMON_FANCY(,&opt_N)
    253260//      USE_FEATURE_START_STOP_DAEMON_FANCY(,&retry_arg)
    254         ,&startas, &cmdname, &signame, &userspec, &execname, &pidfile);
    255 
    256     quiet = (opt & SSD_OPT_QUIET)
    257             USE_FEATURE_START_STOP_DAEMON_FANCY(&& !(opt & SSD_OPT_VERBOSE));
    258 
    259     if (signame) {
    260         signal_nr = bb_xgetlarg(signame, 10, 0, NSIG);
    261     }
    262 
    263     if (!startas)
     261    );
     262
     263    quiet = (opt & OPT_QUIET) && !(opt & OPT_VERBOSE);
     264
     265    if (opt & OPT_s) {
     266        signal_nr = get_signum(signame);
     267        if (signal_nr < 0) bb_show_usage();
     268    }
     269
     270    if (!(opt & OPT_a))
    264271        startas = execname;
    265272
    266273//  USE_FEATURE_START_STOP_DAEMON_FANCY(
    267274//      if (retry_arg)
    268 //          retries = bb_xgetlarg(retry_arg, 10, 0, INT_MAX);
     275//          retries = xatoi_u(retry_arg);
    269276//  )
    270277    argc -= optind;
    271278    argv += optind;
    272279
    273     if (userspec && sscanf(userspec, "%d", &user_id) != 1)
    274         user_id = bb_xgetpwnam(userspec);
    275 
    276     if (opt & SSD_CTX_STOP) {
     280    if (userspec) {
     281        user_id = bb_strtou(userspec, NULL, 10);
     282        if (errno)
     283            user_id = xuname2uid(userspec);
     284    }
     285
     286    if (opt & CTX_STOP) {
    277287        int i = do_stop();
    278         return
    279             USE_FEATURE_START_STOP_DAEMON_FANCY((opt & SSD_OPT_OKNODO)
    280                 ? 0 :) !!(i<=0);
     288        return (opt & OPT_OKNODO) ? 0 : (i <= 0);
    281289    }
    282290
     
    285293    if (found) {
    286294        if (!quiet)
    287             printf("%s already running.\n%d\n", execname ,found->pid);
    288         USE_FEATURE_START_STOP_DAEMON_FANCY(return !(opt & SSD_OPT_OKNODO);)
    289         SKIP_FEATURE_START_STOP_DAEMON_FANCY(return EXIT_FAILURE;)
     295            printf("%s already running\n%d\n", execname, found->pid);
     296        return !(opt & OPT_OKNODO);
    290297    }
    291298    *--argv = startas;
    292     if (opt & SSD_OPT_BACKGROUND) {
    293         bb_xdaemon(0, 0);
    294         setsid();
    295     }
    296     if (opt & SSD_OPT_MAKEPID) {
     299    if (opt & OPT_BACKGROUND) {
     300#if BB_MMU
     301        bb_daemonize(0);
     302#else
     303        pid_t pid = vfork();
     304        if (pid < 0) /* error */
     305            bb_perror_msg_and_die("vfork");
     306        if (pid != 0) {
     307            /* parent */
     308            /* why _exit? the child may have changed the stack,
     309             * so "return 0" may do bad things */
     310            _exit(0);
     311        }
     312        /* child */
     313        setsid(); /* detach from controlling tty */
     314        /* Redirect stdio to /dev/null, close extra FDs.
     315         * We do not actually daemonize because of DAEMON_ONLY_SANITIZE */
     316        bb_daemonize_or_rexec(
     317            DAEMON_DEVNULL_STDIO
     318            + DAEMON_CLOSE_EXTRA_FDS
     319            + DAEMON_ONLY_SANITIZE,
     320            NULL /* argv, unused */ );
     321#endif
     322    }
     323    if (opt & OPT_MAKEPID) {
    297324        /* user wants _us_ to make the pidfile */
    298         FILE *pidf = bb_xfopen(pidfile, "w");
    299 
    300         pid_t pidt = getpid();
    301         fprintf(pidf, "%d\n", pidt);
    302         fclose(pidf);
    303     }
     325        write_pidfile(pidfile);
     326    }
     327    if (opt & OPT_c) {
     328        struct bb_uidgid_t ugid;
     329        parse_chown_usergroup_or_die(&ugid, chuid);
     330        if (ugid.gid != (gid_t) -1) xsetgid(ugid.gid);
     331        if (ugid.uid != (uid_t) -1) xsetuid(ugid.uid);
     332    }
     333#if ENABLE_FEATURE_START_STOP_DAEMON_FANCY
     334    if (opt & OPT_NICELEVEL) {
     335        /* Set process priority */
     336        int prio = getpriority(PRIO_PROCESS, 0) + xatoi_range(opt_N, INT_MIN/2, INT_MAX/2);
     337        if (setpriority(PRIO_PROCESS, 0, prio) < 0) {
     338            bb_perror_msg_and_die("setpriority(%d)", prio);
     339        }
     340    }
     341#endif
    304342    execv(startas, argv);
    305     bb_perror_msg_and_die ("unable to start %s", startas);
    306 }
     343    bb_perror_msg_and_die("cannot start %s", startas);
     344}
Note: See TracChangeset for help on using the changeset viewer.