Nov 6, 2007, 11:01:53 AM (13 years ago)
Bruno Cornec
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <arnaud.tiger_at_hp.com>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod? silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian? keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René? Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

1 edited


  • branches/stable/mindi-busybox/networking/udhcp/Config.in

    r821 r1770  
    6 menu "udhcp Server/Client"
    8 config CONFIG_APP_UDHCPD
     6config APP_UDHCPD
    97    bool "udhcp Server (udhcpd)"
    108    default n
    1513      See http://udhcp.busybox.net for further details.
    17 config CONFIG_APP_UDHCPC
     15config APP_DHCPRELAY
     16    bool "dhcprelay"
     17    default n
     18    depends on APP_UDHCPD
     19    help
     20      dhcprelay listens for dhcp requests on one or more interfaces
     21      and forwards these requests to a different interface or dhcp
     22      server.
     24config APP_DUMPLEASES
     25    bool "Lease display utility (dumpleases)"
     26    default n
     27    depends on APP_UDHCPD
     28    help
     29      dumpleases displays the leases written out by the udhcpd server.
     30      Lease times are stored in the file by time remaining in lease, or
     31      by the absolute time that it expires in seconds from epoch.
     33      See http://udhcp.busybox.net for further details.
     36    bool "Rewrite the lease file at every new acknowledge"
     37    default n
     38    depends on APP_UDHCPD
     39    help
     40      If selected, udhcpd will write a new file with leases every
     41      time a new lease has been accepted, thus eleminating the need
     42      to send SIGUSR1 for the initial writing, or updating. Any timed
     43      rewriting remains undisturbed
     45config APP_UDHCPC
    1846    bool "udhcp Client (udhcpc)"
    1947    default n
    2755      See http://udhcp.busybox.net for further details.
    30     bool "Lease display utility (dumpleases)"
     58    bool "Compile udhcp with noisy debugging messages"
    3159    default n
    32     depends on CONFIG_APP_UDHCPD
    33     help
    34       dumpleases displays the leases written out by the udhcpd server.
    35       Lease times are stored in the file by time remaining in lease, or
    36       by the absolute time that it expires in seconds from epoch.
    38       See http://udhcp.busybox.net for further details.
    41     bool "  Log udhcp messages to syslog (instead of stdout)"
    42     default n
    43     depends on CONFIG_APP_UDHCPD || CONFIG_APP_UDHCPC
    44     help
    45       If selected, udhcpd will log all its messages to syslog, otherwise,
    46       it will attempt to log them to stdout.
    48       See http://udhcp.busybox.net for further details.
    51     bool "  Compile udhcp with noisy debugging messages"
    52     default n
    53     depends on CONFIG_APP_UDHCPD || CONFIG_APP_UDHCPC
     60    depends on APP_UDHCPD || APP_UDHCPC
    5461    help
    5562      If selected, udhcpd will output extra debugging output.  If using
    5966      See http://udhcp.busybox.net for further details.
    61 endmenu
     68config FEATURE_RFC3397
     69    bool "Support for RFC3397 domain search (experimental)"
     70    default n
     71    depends on APP_UDHCPD || APP_UDHCPC
     72    help
     73      If selected, both client and server will support passing of domain
     74      search lists via option 119, specified in RFC3397.
Note: See TracChangeset for help on using the changeset viewer.