Ignore:
Timestamp:
Nov 6, 2007, 11:01:53 AM (16 years ago)
Author:
Bruno Cornec
Message:
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <arnaud.tiger_at_hp.com>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

File:
1 edited

Legend:

Unmodified
Added
Removed

  • branches/stable/mindi-busybox/libbb/u_signal_names.c

    r821 r1770  
    11/* vi: set sw=4 ts=4: */
    22/*
    3  * Utility routines.
     3 * Signal name/number conversion routines.
    44 *
    5  * Copyright (C) many different people.
    6  * If you wrote this, please acknowledge your work.
     5 * Copyright 2006 Rob Landley <rob@landley.net>
    76 *
    87 * Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
    98 */
    109
    11 #include <signal.h>
    12 #include <ctype.h>
    13 #include <string.h>
    14 #include <strings.h>
    15 #include <stdlib.h>
    16 #include <stdio.h>
    17 
    1810#include "libbb.h"
    1911
    20 struct signal_name {
    21     const char *name;
    22     int number;
     12static const char signals[32][7] = {
     13    // SUSv3 says kill must support these, and specifies the numerical values,
     14    // http://www.opengroup.org/onlinepubs/009695399/utilities/kill.html
     15    // TODO: "[SIG]EXIT" shouldn't work for kill, right?
     16    // {0, "EXIT"}, {1, "HUP"}, {2, "INT"}, {3, "QUIT"},
     17    // {6, "ABRT"}, {9, "KILL"}, {14, "ALRM"}, {15, "TERM"}
     18    // And Posix adds the following:
     19    // {SIGILL, "ILL"}, {SIGTRAP, "TRAP"}, {SIGFPE, "FPE"}, {SIGUSR1, "USR1"},
     20    // {SIGSEGV, "SEGV"}, {SIGUSR2, "USR2"}, {SIGPIPE, "PIPE"}, {SIGCHLD, "CHLD"},
     21    // {SIGCONT, "CONT"}, {SIGSTOP, "STOP"}, {SIGTSTP, "TSTP"}, {SIGTTIN, "TTIN"},
     22    // {SIGTTOU, "TTOU"}
     23    [0] = "EXIT",
     24#ifdef SIGHUP
     25    [SIGHUP   ] = "HUP",
     26#endif
     27#ifdef SIGINT
     28    [SIGINT   ] = "INT",
     29#endif
     30#ifdef SIGQUIT
     31    [SIGQUIT  ] = "QUIT",
     32#endif
     33#ifdef SIGILL
     34    [SIGILL   ] = "ILL",
     35#endif
     36#ifdef SIGTRAP
     37    [SIGTRAP  ] = "TRAP",
     38#endif
     39#ifdef SIGABRT
     40    [SIGABRT  ] = "ABRT",
     41#endif
     42#ifdef SIGBUS
     43    [SIGBUS   ] = "BUS",
     44#endif
     45#ifdef SIGFPE
     46    [SIGFPE   ] = "FPE",
     47#endif
     48#ifdef SIGKILL
     49    [SIGKILL  ] = "KILL",
     50#endif
     51#ifdef SIGUSR1
     52    [SIGUSR1  ] = "USR1",
     53#endif
     54#ifdef SIGSEGV
     55    [SIGSEGV  ] = "SEGV",
     56#endif
     57#ifdef SIGUSR2
     58    [SIGUSR2  ] = "USR2",
     59#endif
     60#ifdef SIGPIPE
     61    [SIGPIPE  ] = "PIPE",
     62#endif
     63#ifdef SIGALRM
     64    [SIGALRM  ] = "ALRM",
     65#endif
     66#ifdef SIGTERM
     67    [SIGTERM  ] = "TERM",
     68#endif
     69#ifdef SIGSTKFLT
     70    [SIGSTKFLT] = "STKFLT",
     71#endif
     72#ifdef SIGCHLD
     73    [SIGCHLD  ] = "CHLD",
     74#endif
     75#ifdef SIGCONT
     76    [SIGCONT  ] = "CONT",
     77#endif
     78#ifdef SIGSTOP
     79    [SIGSTOP  ] = "STOP",
     80#endif
     81#ifdef SIGTSTP
     82    [SIGTSTP  ] = "TSTP",
     83#endif
     84#ifdef SIGTTIN
     85    [SIGTTIN  ] = "TTIN",
     86#endif
     87#ifdef SIGTTOU
     88    [SIGTTOU  ] = "TTOU",
     89#endif
     90#ifdef SIGURG
     91    [SIGURG   ] = "URG",
     92#endif
     93#ifdef SIGXCPU
     94    [SIGXCPU  ] = "XCPU",
     95#endif
     96#ifdef SIGXFSZ
     97    [SIGXFSZ  ] = "XFSZ",
     98#endif
     99#ifdef SIGVTALRM
     100    [SIGVTALRM] = "VTALRM",
     101#endif
     102#ifdef SIGPROF
     103    [SIGPROF  ] = "PROF",
     104#endif
     105#ifdef SIGWINCH
     106    [SIGWINCH ] = "WINCH",
     107#endif
     108#ifdef SIGPOLL
     109    [SIGPOLL  ] = "POLL",
     110#endif
     111#ifdef SIGPWR
     112    [SIGPWR   ] = "PWR",
     113#endif
     114#ifdef SIGSYS
     115    [SIGSYS   ] = "SYS",
     116#endif
    23117};
    24118
    25 static const struct signal_name signames[] = {
    26     /* POSIX signals */
    27     { "EXIT",       0 },            /* 0 */
    28     { "HUP",        SIGHUP },       /* 1 */
    29     { "INT",        SIGINT },       /* 2 */
    30     { "QUIT",       SIGQUIT },      /* 3 */
    31     { "ILL",        SIGILL },       /* 4 */
    32     { "ABRT",       SIGABRT },      /* 6 */
    33     { "FPE",        SIGFPE },       /* 8 */
    34     { "KILL",       SIGKILL },      /* 9 */
    35     { "SEGV",       SIGSEGV },      /* 11 */
    36     { "PIPE",       SIGPIPE },      /* 13 */
    37     { "ALRM",       SIGALRM },      /* 14 */
    38     { "TERM",       SIGTERM },      /* 15 */
    39     { "USR1",       SIGUSR1 },      /* 10 (arm,i386,m68k,ppc), 30 (alpha,sparc*), 16 (mips) */
    40     { "USR2",       SIGUSR2 },      /* 12 (arm,i386,m68k,ppc), 31 (alpha,sparc*), 17 (mips) */
    41     { "CHLD",       SIGCHLD },      /* 17 (arm,i386,m68k,ppc), 20 (alpha,sparc*), 18 (mips) */
    42     { "CONT",       SIGCONT },      /* 18 (arm,i386,m68k,ppc), 19 (alpha,sparc*), 25 (mips) */
    43     { "STOP",       SIGSTOP },      /* 19 (arm,i386,m68k,ppc), 17 (alpha,sparc*), 23 (mips) */
    44     { "TSTP",       SIGTSTP },      /* 20 (arm,i386,m68k,ppc), 18 (alpha,sparc*), 24 (mips) */
    45     { "TTIN",       SIGTTIN },      /* 21 (arm,i386,m68k,ppc,alpha,sparc*), 26 (mips) */
    46     { "TTOU",       SIGTTOU },      /* 22 (arm,i386,m68k,ppc,alpha,sparc*), 27 (mips) */
    47     /* Miscellaneous other signals */
    48 #ifdef SIGTRAP
    49     { "TRAP",       SIGTRAP },      /* 5 */
     119// Convert signal name to number.
     120
     121int get_signum(const char *name)
     122{
     123    int i;
     124
     125    i = bb_strtou(name, NULL, 10);
     126    if (!errno)
     127        return i;
     128    if (strncasecmp(name, "SIG", 3) == 0)
     129        name += 3;
     130    for (i = 0; i < ARRAY_SIZE(signals); i++)
     131        if (strcasecmp(name, signals[i]) == 0)
     132            return i;
     133
     134#if ENABLE_DESKTOP && (defined(SIGIOT) || defined(SIGIO))
     135    /* These are aliased to other names */
     136    if ((name[0] | 0x20) == 'i' && (name[1] | 0x20) == 'o') {
     137#ifdef SIGIO
     138        if (!name[2])
     139            return SIGIO;
    50140#endif
    51141#ifdef SIGIOT
    52     { "IOT",        SIGIOT },       /* 6, same as SIGABRT */
     142        if ((name[2] | 0x20) == 't' && !name[3])
     143            return SIGIOT;
    53144#endif
    54 #ifdef SIGEMT
    55     { "EMT",        SIGEMT },       /* 7 (mips,alpha,sparc*) */
     145    }
    56146#endif
    57 #ifdef SIGBUS
    58     { "BUS",        SIGBUS },       /* 7 (arm,i386,m68k,ppc), 10 (mips,alpha,sparc*) */
    59 #endif
    60 #ifdef SIGSYS
    61     { "SYS",        SIGSYS },       /* 12 (mips,alpha,sparc*) */
    62 #endif
    63 #ifdef SIGSTKFLT
    64     { "STKFLT",     SIGSTKFLT },    /* 16 (arm,i386,m68k,ppc) */
    65 #endif
    66 #ifdef SIGURG
    67     { "URG",        SIGURG },       /* 23 (arm,i386,m68k,ppc), 16 (alpha,sparc*), 21 (mips) */
    68 #endif
    69 #ifdef SIGIO
    70     { "IO",         SIGIO },        /* 29 (arm,i386,m68k,ppc), 23 (alpha,sparc*), 22 (mips) */
    71 #endif
    72 #ifdef SIGPOLL
    73     { "POLL",       SIGPOLL },      /* same as SIGIO */
    74 #endif
    75 #ifdef SIGCLD
    76     { "CLD",        SIGCLD },       /* same as SIGCHLD (mips) */
    77 #endif
    78 #ifdef SIGXCPU
    79     { "XCPU",       SIGXCPU },      /* 24 (arm,i386,m68k,ppc,alpha,sparc*), 30 (mips) */
    80 #endif
    81 #ifdef SIGXFSZ
    82     { "XFSZ",       SIGXFSZ },      /* 25 (arm,i386,m68k,ppc,alpha,sparc*), 31 (mips) */
    83 #endif
    84 #ifdef SIGVTALRM
    85     { "VTALRM",     SIGVTALRM },    /* 26 (arm,i386,m68k,ppc,alpha,sparc*), 28 (mips) */
    86 #endif
    87 #ifdef SIGPROF
    88     { "PROF",       SIGPROF },      /* 27 (arm,i386,m68k,ppc,alpha,sparc*), 29 (mips) */
    89 #endif
    90 #ifdef SIGPWR
    91     { "PWR",        SIGPWR },       /* 30 (arm,i386,m68k,ppc), 29 (alpha,sparc*), 19 (mips) */
    92 #endif
    93 #ifdef SIGINFO
    94     { "INFO",       SIGINFO },      /* 29 (alpha) */
    95 #endif
    96 #ifdef SIGLOST
    97     { "LOST",       SIGLOST },      /* 29 (arm,i386,m68k,ppc,sparc*) */
    98 #endif
    99 #ifdef SIGWINCH
    100     { "WINCH",      SIGWINCH },     /* 28 (arm,i386,m68k,ppc,alpha,sparc*), 20 (mips) */
    101 #endif
    102 #ifdef SIGUNUSED
    103     { "UNUSED",     SIGUNUSED },    /* 31 (arm,i386,m68k,ppc) */
    104 #endif
    105     {0, 0}
    106 };
    107147
    108 /*
    109     if str_sig == NULL returned signal name [*signo],
    110     if str_sig != NULL - set *signo from signal_name,
    111         findings with digit number or with or without SIG-prefix name
     148    return -1;
     149}
    112150
    113     if startnum=0 flag for support finding zero signal,
    114         but str_sig="0" always found, (hmm - standart or realize?)
    115     if startnum<0 returned reverse signal_number  <-> signal_name
    116     if found error - returned NULL
     151// Convert signal number to name
    117152
    118 */
     153const char *get_signame(int number)
     154{
     155    if ((unsigned)number < ARRAY_SIZE(signals)) {
     156        if (signals[number][0]) /* if it's not an empty str */
     157            return signals[number];
     158    }
    119159
    120 const char *
    121 u_signal_names(const char *str_sig, int *signo, int startnum)
    122 {
    123     static char retstr[16];
    124     const struct signal_name *s = signames;
    125     static const char prefix[] = "SIG";
    126     const char *sptr;
    127 
    128     if(startnum)
    129         s++;
    130     if(str_sig==NULL) {
    131         while (s->name != 0) {
    132             if(s->number == *signo)
    133                 break;
    134             s++;
    135         }
    136     } else {
    137         if (isdigit(((unsigned char)*str_sig))) {
    138             char *endp;
    139             long int sn = strtol(str_sig, &endp, 10);
    140             /* test correct and overflow */
    141             if(*endp == 0 && sn >= 0 && sn < NSIG) {
    142                 *signo = (int)sn;
    143                 /* test for unnamed */
    144                 sptr = u_signal_names(0, signo, 0);
    145                 if(sptr==NULL)
    146                     return NULL;
    147                 if(sn!=0)
    148                     sptr += 3;
    149                 return sptr;
    150             }
    151         } else {
    152             sptr = str_sig;
    153             while (s->name != 0) {
    154                 if (strcasecmp(s->name, sptr) == 0) {
    155                     *signo = s->number;
    156                     if(startnum<0) {
    157                         sprintf(retstr, "%d", *signo);
    158                         return retstr;
    159                     }
    160                     break;
    161                 }
    162                 if(s!=signames && sptr == str_sig &&
    163                         strncasecmp(sptr, prefix, 3) == 0) {
    164                     sptr += 3;      /* strlen(prefix) */
    165                     continue;
    166                 }
    167                 sptr = str_sig;
    168                 s++;
    169             }
    170         }
    171     }
    172     if(s->name==0)
    173         return NULL;
    174     if(s!=signames)
    175         strcpy(retstr, prefix);
    176      else
    177         retstr[0] = 0;
    178     return strcat(retstr, s->name);
     160    return itoa(number);
    179161}
Note: See TracChangeset for help on using the changeset viewer.