Ignore:
Timestamp:
Nov 6, 2007, 11:01:53 AM (12 years ago)
Author:
Bruno Cornec
Message:
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <arnaud.tiger_at_hp.com>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod? silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian? keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René? Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

File:
1 edited

Legend:

Unmodified
Added
Removed
  • branches/stable/mindi-busybox/console-tools/Config.in

    r821 r1770  
    66menu "Console Utilities"
    77
    8 config CONFIG_CHVT
     8config CHVT
    99    bool "chvt"
    1010    default n
     
    1313      Example: chvt 4 (change to terminal /dev/tty4)
    1414
    15 config CONFIG_CLEAR
     15config CLEAR
    1616    bool "clear"
    1717    default n
     
    1919      This program clears the terminal screen.
    2020
    21 config CONFIG_DEALLOCVT
     21config DEALLOCVT
    2222    bool "deallocvt"
    2323    default n
     
    2525      This program deallocates unused virtual consoles.
    2626
    27 config CONFIG_DUMPKMAP
     27config DUMPKMAP
    2828    bool "dumpkmap"
    2929    default n
     
    3232      stdout, in binary format. You can then use loadkmap to load it.
    3333
    34 config CONFIG_LOADFONT
     34config LOADFONT
    3535    bool "loadfont"
    3636    default n
     
    3838      This program loads a console font from standard input.
    3939
    40 config CONFIG_LOADKMAP
     40config LOADKMAP
    4141    bool "loadkmap"
    4242    default n
     
    4545      standard input.
    4646
    47 config CONFIG_OPENVT
     47config OPENVT
    4848    bool "openvt"
    4949    default n
     
    5252      virtual terminal.
    5353
    54 config CONFIG_RESET
     54config RESET
    5555    bool "reset"
    5656    default n
     
    5959      gets messed up.
    6060
    61 config CONFIG_SETCONSOLE
     61config RESIZE
     62    bool "resize"
     63    default n
     64    help
     65      This program is used to (re)set the width and height of your current
     66      terminal.
     67
     68config FEATURE_RESIZE_PRINT
     69    bool "print environment variables"
     70    default n
     71    depends on RESIZE
     72    help
     73      Prints the newly set size (number of columns and rows) of
     74      the terminal.
     75      E.g.:
     76      COLUMNS=80;LINES=44;export COLUMNS LINES;
     77
     78config SETCONSOLE
    6279    bool "setconsole"
    6380    default n
     
    6683      like the current tty while logged in via telnet.
    6784
    68 config CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS
     85config FEATURE_SETCONSOLE_LONG_OPTIONS
    6986    bool "Enable long options"
    7087    default n
    71     depends on CONFIG_SET_CONSOLE && CONFIG_GETOPT_LONG
     88    depends on SETCONSOLE && GETOPT_LONG
    7289    help
    7390      Support long options for the setconsole applet.
    7491
    75 config CONFIG_SETKEYCODES
     92config SETKEYCODES
    7693    bool "setkeycodes"
    7794    default n
     
    8097      map, allowing unusual keyboards to generate usable keycodes.
    8198
    82 config CONFIG_SETLOGCONS
     99config SETLOGCONS
    83100    bool "setlogcons"
    84101    default n
Note: See TracChangeset for help on using the changeset viewer.