source: MondoRescue/trunk/mindi-busybox/libbb/sha1.c@ 929

/*
 *  Based on shasum from http://www.netsw.org/crypto/hash/
 *  Majorly hacked up to use Dr Brian Gladman's sha1 code
 *
 *  Copyright (C) 2002 Dr Brian Gladman <brg@gladman.me.uk>, Worcester, UK.
 *  Copyright (C) 2003 Glenn L. McGrath
 *  Copyright (C) 2003 Erik Andersen
 *  
 *  LICENSE TERMS
 *
 *  The free distribution and use of this software in both source and binary
 *  form is allowed (with or without changes) provided that:
 *
 *    1. distributions of this source code include the above copyright
 *       notice, this list of conditions and the following disclaimer;
 *
 *    2. distributions in binary form include the above copyright
 *       notice, this list of conditions and the following disclaimer
 *       in the documentation and/or other associated materials;
 *
 *    3. the copyright holder's name is not used to endorse products
 *       built using this software without specific written permission.
 *
 *  ALTERNATIVELY, provided that this notice is retained in full, this product
 *  may be distributed under the terms of the GNU General Public License (GPL),
 *  in which case the provisions of the GPL apply INSTEAD OF those given above.
 *
 *  DISCLAIMER
 *
 *  This software is provided 'as is' with no explicit or implied warranties
 *  in respect of its properties, including, but not limited to, correctness
 *  and/or fitness for purpose.
 *  ---------------------------------------------------------------------------
 *  Issue Date: 10/11/2002
 *
 *  This is a byte oriented version of SHA1 that operates on arrays of bytes
 *  stored in memory. It runs at 22 cycles per byte on a Pentium P4 processor
 */

#include <fcntl.h>
#include <limits.h>
#include <stdio.h>
#include <stdint.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>

#include "libbb.h"

# define SHA1_BLOCK_SIZE  64
# define SHA1_DIGEST_SIZE 20
# define SHA1_HASH_SIZE   SHA1_DIGEST_SIZE
# define SHA2_GOOD        0
# define SHA2_BAD         1

# define rotl32(x,n) (((x) << n) | ((x) >> (32 - n)))

# define SHA1_MASK   (SHA1_BLOCK_SIZE - 1)

/* reverse byte order in 32-bit words   */
#define ch(x,y,z)       ((z) ^ ((x) & ((y) ^ (z))))
#define parity(x,y,z)   ((x) ^ (y) ^ (z))
#define maj(x,y,z)      (((x) & (y)) | ((z) & ((x) | (y))))

/* A normal version as set out in the FIPS. This version uses   */
/* partial loop unrolling and is optimised for the Pentium 4    */
# define rnd(f,k)    \
    t = a; a = rotl32(a,5) + f(b,c,d) + e + k + w[i]; \
    e = d; d = c; c = rotl32(b, 30); b = t


static void sha1_compile(sha1_ctx_t *ctx)
{
    uint32_t w[80], i, a, b, c, d, e, t;

    /* note that words are compiled from the buffer into 32-bit */
    /* words in big-endian order so an order reversal is needed */
    /* here on little endian machines                           */
    for (i = 0; i < SHA1_BLOCK_SIZE / 4; ++i)
        w[i] = htonl(ctx->wbuf[i]);

    for (i = SHA1_BLOCK_SIZE / 4; i < 80; ++i)
        w[i] = rotl32(w[i - 3] ^ w[i - 8] ^ w[i - 14] ^ w[i - 16], 1);

    a = ctx->hash[0];
    b = ctx->hash[1];
    c = ctx->hash[2];
    d = ctx->hash[3];
    e = ctx->hash[4];

    for (i = 0; i < 20; ++i) {
        rnd(ch, 0x5a827999);
    }

    for (i = 20; i < 40; ++i) {
        rnd(parity, 0x6ed9eba1);
    }

    for (i = 40; i < 60; ++i) {
        rnd(maj, 0x8f1bbcdc);
    }

    for (i = 60; i < 80; ++i) {
        rnd(parity, 0xca62c1d6);
    }

    ctx->hash[0] += a;
    ctx->hash[1] += b;
    ctx->hash[2] += c;
    ctx->hash[3] += d;
    ctx->hash[4] += e;
}

void sha1_begin(sha1_ctx_t *ctx)
{
    ctx->count[0] = ctx->count[1] = 0;
    ctx->hash[0] = 0x67452301;
    ctx->hash[1] = 0xefcdab89;
    ctx->hash[2] = 0x98badcfe;
    ctx->hash[3] = 0x10325476;
    ctx->hash[4] = 0xc3d2e1f0;
}

/* SHA1 hash data in an array of bytes into hash buffer and call the        */
/* hash_compile function as required.                                       */
void sha1_hash(const void *data, size_t length, sha1_ctx_t *ctx)
{
    uint32_t pos = (uint32_t) (ctx->count[0] & SHA1_MASK);
    uint32_t freeb = SHA1_BLOCK_SIZE - pos;
    const unsigned char *sp = data;

    if ((ctx->count[0] += length) < length)
        ++(ctx->count[1]);

    while (length >= freeb) {   /* tranfer whole blocks while possible  */
        memcpy(((unsigned char *) ctx->wbuf) + pos, sp, freeb);
        sp += freeb;
        length -= freeb;
        freeb = SHA1_BLOCK_SIZE;
        pos = 0;
        sha1_compile(ctx);
    }

    memcpy(((unsigned char *) ctx->wbuf) + pos, sp, length);
}

void *sha1_end(void *resbuf, sha1_ctx_t *ctx)
{
    /* SHA1 Final padding and digest calculation  */
#if BB_BIG_ENDIAN
    static uint32_t mask[4] = { 0x00000000, 0xff000000, 0xffff0000, 0xffffff00 };
    static uint32_t bits[4] = { 0x80000000, 0x00800000, 0x00008000, 0x00000080 };
#else
    static uint32_t mask[4] = { 0x00000000, 0x000000ff, 0x0000ffff, 0x00ffffff };
    static uint32_t bits[4] = { 0x00000080, 0x00008000, 0x00800000, 0x80000000 };
#endif

    uint8_t *hval = resbuf;
    uint32_t i, cnt = (uint32_t) (ctx->count[0] & SHA1_MASK);

    /* mask out the rest of any partial 32-bit word and then set    */
    /* the next byte to 0x80. On big-endian machines any bytes in   */
    /* the buffer will be at the top end of 32 bit words, on little */
    /* endian machines they will be at the bottom. Hence the AND    */
    /* and OR masks above are reversed for little endian systems    */
    ctx->wbuf[cnt >> 2] =
        (ctx->wbuf[cnt >> 2] & mask[cnt & 3]) | bits[cnt & 3];

    /* we need 9 or more empty positions, one for the padding byte  */
    /* (above) and eight for the length count.  If there is not     */
    /* enough space pad and empty the buffer                        */
    if (cnt > SHA1_BLOCK_SIZE - 9) {
        if (cnt < 60)
            ctx->wbuf[15] = 0;
        sha1_compile(ctx);
        cnt = 0;
    } else              /* compute a word index for the empty buffer positions  */
        cnt = (cnt >> 2) + 1;

    while (cnt < 14)    /* and zero pad all but last two positions      */
        ctx->wbuf[cnt++] = 0;

    /* assemble the eight byte counter in the buffer in big-endian  */
    /* format                                  */

    ctx->wbuf[14] = htonl((ctx->count[1] << 3) | (ctx->count[0] >> 29));
    ctx->wbuf[15] = htonl(ctx->count[0] << 3);

    sha1_compile(ctx);

    /* extract the hash value as bytes in case the hash buffer is   */
    /* misaligned for 32-bit words                                  */

    for (i = 0; i < SHA1_DIGEST_SIZE; ++i)
        hval[i] = (unsigned char) (ctx->hash[i >> 2] >> 8 * (~i & 3));
    
    return resbuf;
}