source: MondoRescue/branches/stable/mondo-doc/mondorescue-howto.sgml@ 556

<!DOCTYPE BOOK PUBLIC "-//OASIS//DTD DocBook V4.1//EN" [
<!ENTITY curdate "DDD">
<!ENTITY curver "VVV-rRRR">

<!ENTITY WWWB "http://www.mondorescue.org/">
<!ENTITY WWW '<ulink url="http://www.mondorescue.org">MondoRescue</ulink>'>
<!ENTITY ML '<ulink url="http://lists.sourceforge.net/lists/listinfo/mondo-devel">mondorescue mailing list</ulink>'>
<!ENTITY gfdl SYSTEM "fdl.sgml">
]>

<book>

<bookinfo>
<title>MondoRescue HOWTO</title>
<subtitle>
Utilisation and Configuration of Mondo and Mindi under Linux (Version &curver;)
</subtitle>
<graphic fileref="images/protected-by-mondo" align="center">

<pubdate>
in its latest version the
&curdate;
</pubdate>

<abstract>
<para>
This document describes the use of mondo and mindi tools to realize disaster recovery backup of your systems. It provides information on installation, backup and restore modes, hardware and software requirements, and answers to some frequently asked questions.
The goals are to offer a general view of the functions and their best usages.
Mondo Rescue is a Disaster Recovery Solution which allows you
to effortlessly backup and interactively restore Linux, Windows and
other supported filesystem partitions to/from CD/DVD-+R/RW media, tape,
NFS, ... and Mindi Linux provides the bootable emergency restore
CD/floppy set which Mondo uses at boot-time.
</para>
</abstract>

<author>
<firstname>Bruno</firstname>
<surname>Cornec</surname>
<affiliation>
<orgname>MondoRescue Project</orgname>
<address><email>bcornec@users.berlios.de</email></address>
</affiliation>
</author>
<!--
Hugo Rabson
Mikael Hultgren
Stan Benoit
Randy Delfs
Cafeole
Bryan J. Smith
-->

<copyright>
<year>2000-2006</year>
<holder role="mailto:bcornec@users.berlios.de">Bruno Cornec</holder>
</copyright>

<legalnotice>
<title>License</title>
<para>
</para>
<para>
This HOWTO is a free documentation. you may copy, redistribute and/or modify it under the terms of the
<Link LinkEnd="gfdl">
GNU Free Documentation License, Version 1.1
</link>.</para>
<para>
or any later version published by the Free Software Foundation; with no Invarian
t Sections, Front-Cover Texts or Back-Cover Texts. This document is distributed
hoping it will be useful, but <emphasis>without any guaranty</emphasis>; you're
completely responsible of its use, and coulnd't complain in case it doesn't work
, or even if it breaks the hardware. All the software included in it, if not alr
eady copyrighted is released under the GPL.
</para>
</legalnotice>

<revhistory>
<revision>
    <revnumber>2.06</revnumber>
    <date>2006-01-16</date>
    <authorinitials>Bruno Cornec</authorinitials>
    <revdescription>
    <para>
    First SGML version publically available, remade from the HTML docs of the project.
    </para>
    </revdescription>
</revision>
</revhistory>
</bookinfo>

<toc></toc>
<lot></lot>


<chapter id="intro">
<title>About this Guide</title>

<sect1 id="intro-purpose">
<title>Purpose / Scope of this Guide</title>

<para>
This HOWTO serves to help people get started with using
mondo/mindi as way to backup/restore their system. This is a work
constantly evolving. It was started by Hugo Rabson and has
since been worked upon by a number of people. See the
'<ulink url="&WWWB;about.html#devteam">About</ulink>' web
page for a list of members of the development team.</para>

<para>There are many ways to contribute to the Linux movement
without actually writing code. One of the most important is writing
documentation, allowing each person to share their knowledge with
thousands of others around the world. This HOWTO is designed to
help you get familiar with how Mondo/Mindi works.</para>

<para>
Opinions expressed here are those of the authors.
Informations are provided in the aim to be useful to the readers.
However, there can't be, through this document, any warranty of any kind
on the way it works on your systems, nor the author could be responsible for any problem caused by the use of these informations.
However, software editors don't garantee you a lot either (re-read the contracts).
</para>
</sect1>

<sect1 id="intro-newversion"><title>New versions of this document</title>

<para>The newest version of this document can always be found on
MondoRescue's homepage &WWW;.</para>
<para>
If you make a translation of this document into another language, please let meknow so that I can include a reference to it here.
</para>
</sect1>

<sect1><title>Suggestions / Feedback</title>
<para>
I rely on you, the reader, to make this HOWTO useful. THis HOWTO is probably incomplete even if it tries to be accurate to the best of our knowledge. 
If you have any suggestions, corrections, recommandations or congratulations :-) don't hesitate to send them to me
<email>bcornec@users.berlios.de</email>,
and I will try to incorporate them in a next revision or to the &ML;;
e-mail the list at
<ulink url="mailto:mondo-devel@lists.sourceforge.net">mondo-devel@lists.sourceforge.net</ulink>;
tell us what is wrong and how it should be fixed.
Include the section title and recommended changes. Whenever possible, include
the exact, spell-checked, grammar-checked text that you think would
improve the document.
</para>
<para>See Mondo's
        <ulink url="http://www.mondorescue.org/feedback/feedback.html">Feedback</ulink> page for
more information.
</para>
<para>
Please note that we do our best to help everyone but it is
difficult for us to help you if you do not attach a log file to
your e-mail. Let me say that again - attach your log file to your
e-mail! Thank you. Without it we can't offer
any tangible help because you aren't either. That's what the log
file is for. It is located at <filename>/var/log/mondo-archive.log</filename>; and <filename>/var/log/miindi.log</filename> or at <filename>/var/log/mondo-restore.log</filename>
</para>
<para>
This document was originaly written by native english speakers, but is maintained by a non-native english speaker so help me correct mistaques instead of rumbling that I've done one :-)
</para>
<para>
I am also willing to answer general questions on MondoRescue, the best I can.
Before doing so, please read all of the information in this HOWTO, and then send me detailed information about the problem, especially including the logs generated by the tools, or traces obtained (Did I say that already :-].
</para>
<para>
If you publish this document on a CD-ROM or in hardcopy form, a complimentary copy would be appreciated; mail me for my postal address. Also consider making a donation to the Linux Documentation Project to help support free documentation for Linux. Contact the Linux HOWTO coordinator,
Guylhem AZNAR <email>guylhem@rrremovethis.oeil.qc.ca</email>.
</para>
</sect1>

<sect1 id=intro-thanks><title>Aknowledgements</title>

<para>Thanks goes to these people for helping and adding to this
HOWTO.</para>

<para>Document maintainer:</para>
<itemizedlist mark="bullet" spacing="Compact">
<listitem>
<para>Bruno Cornec</para>
</listitem>
</itemizedlist>
<para>Original Design Assistance by:</para>
<itemizedlist>
<listitem>
<para>Xion Network.com</para>
</listitem>
</itemizedlist>
<para>Original Document Assistance by:</para>
<itemizedlist>
<listitem>
<para>Cafeole</para>
</listitem>
<listitem>
<para>Troff</para>
</listitem>
<listitem>
<para>Randy Delfs</para>
</listitem>
<listitem>
<para>Mikael Hultgren</para>
</listitem>
</itemizedlist>
<para>Original LinuxDoc and LaTeX Reformat by:</para>
<itemizedlist>
<listitem>
<para>Bryan J. Smith</para>
</listitem>
</itemizedlist>
<para>Original DocBook Reformat by:</para>
<itemizedlist>
<listitem>
<para>Mikael Hultgren</para>
</listitem>
</itemizedlist>
<para>Original author; 1.6x material:</para>
<itemizedlist>
<listitem>
<para>Hugo Rabson</para>
</listitem>
</itemizedlist>

</sect1>
</chapter>

<chapter id="quickstart"><title>QuickStart</title>
<itemizedlist mark="bullet" spacing="Compact">
<listitem>
<para>We recommend that you read this complete 
HOWTO. However, if you are too busy or impatient, then
please use this QuickStart guide to stay out of trouble.</para>
</listitem>
<listitem>
<para>Install the tarball, RPM, or DEB mindi and mondo
packages. (see <link linkend="installation">Installation</link>
for more details)</para>
</listitem>
<listitem>
<para>Execute as root (type 'su -' to become root if you are not
logged in as root)</para>
<para></para>

<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# mondoarchive

</entry>
</row>
</tbody></tgroup></informaltable>

</listitem>
</itemizedlist>
<para></para>

<informaltable><tgroup cols="2"><tbody>
<row>
<entry>
<ulink url="images/mamain.png"><inlinemediaobject><imageobject>
<imagedata fileref="images/mamain-mini">
</imageobject></inlinemediaobject>
</ulink>
</entry>
<entry>
Choose from the list of supported backup media types. The media you
will use most often are CD/DVD-+R, CD/DVD-+RW, tape, NFS and hard disk. If
you want to backup/restore over a network, choose 'NFS'. If you
want to backup/restore to/from a local partition or if you simply
want to store the ISO images in a local directory until you have
time or facilities to burn them to CD's, choose 'hard disk'. If you
choose 'CD/DVD-+R[W]' or 'tape' then in general your hardware will be
detected and configured for you.
</entry>
</row>
<row>
<entry>
<ulink url="images/maburnproof.png"><inlinemediaobject><imageobject>
<imagedata fileref="images/maburnproof-mini">
</imageobject></inlinemediaobject>
</ulink>
</entry>
<entry>
        If you are backing up to CD/DVD-+R[W] then Mondo will ask you if your CD
burner has BurnProof technology, is inside a laptop, or is
otherwise eccentric. If you are backing up to a tape streamer then
you will not see this message.
</entry>
</row>
<row>
<entry>
<ulink url="images/macompression.png"><inlinemediaobject><imageobject>
<imagedata fileref="images/macompression-mini">
</imageobject></inlinemediaobject>
</ulink>
</entry>
<entry>
How much compression do you want? None, if your tape streamer has
built-in hardware compression. Maximum, if your CPU is blazingly
fast. Average should do just fine for most situations.
</entry>
</row>
<row>
<entry>
<ulink url="images/mainclude.png"><inlinemediaobject><imageobject>
<imagedata fileref="images/mainclude-mini">
</imageobject></inlinemediaobject>
</ulink>
</entry>
<entry>
If you want to backup the whole computer (excluding /sys and /proc,
naturally) then leave this as / which is the default. Otherwise,
specify subsets, (e.g. /usr/local /home ) being sure to put a space
in between each path.
</entry>
</row>
<row>
<entry>
<ulink url="images/maexclude.png"><inlinemediaobject><imageobject>
<imagedata fileref="images/maexclude-mini">
</imageobject></inlinemediaobject>
</ulink>
</entry>
<entry>
If you are backing up your whole computer then you might want to
exclude certain directories, e.g. /shared/MP3. Please specify them
in the 'exclude directories' dialog box. Please put a space in
between each path, e.g. /shared/private /scratch /nfs /windows
</entry>
</row>
<row>
<entry>
<ulink url="images/makernel.png"><inlinemediaobject><imageobject>
<imagedata fileref="images/makernel-mini">
</imageobject></inlinemediaobject>
</ulink>
</entry>
<entry>
Is your kernel sane? Red Hat, Mandrake, SuSE, Debian and Slackware users
should in general say 'yes' because these vendors are good at
producing reliable kernels. If you are using Gentoo or LFS
then your kernel might be non-standard, in which case say 'no' to
use Mondo's failsafe kernel (provided separately).
</entry>
</row>
<row>
<entry>
<ulink url="images/maverifyq.png"><inlinemediaobject><imageobject>
<imagedata fileref="images/maverifyq-mini">
</imageobject></inlinemediaobject>
</ulink>
</entry>
<entry>
If you want to verify the archives after writing them to media, say
'yes' here. If you have absolute faith in your hardware and your
Linux distribution, say 'no'... and a little prayer.
</entry>
</row>
<row>
<entry>
<ulink url="images/maproceedq.png"><inlinemediaobject><imageobject>
<imagedata fileref="images/maproceedq-mini">
</imageobject></inlinemediaobject>
</ulink>
</entry>
<entry>
If you are sure you want to go ahead, say 'yes' and find something
else to do while Mondo backs up your computer. If you say 'no' then
you will be unceremoniously dumped at the shell prompt. :-)
</entry>
</row>
<row>
<entry>
<ulink url="images/1.png"><inlinemediaobject><imageobject>
<imagedata fileref="images/1-mini">
</imageobject></inlinemediaobject>
</ulink>
</entry>
<entry>
The backup process will now commence. There are some pre-backup
tasks to be carried out first but the backup is essentially
underway. To simplify the backup process, you were asked a series
of questions. Next time, if you like, you could call mondoarchive
with various command-line switches to control its behavior, instead
of answering a series of questions. See the man page for details.
</entry>
</row>
<row>
<entry>
<ulink url="images/3.png"><inlinemediaobject><imageobject>
<imagedata fileref="images/3-mini">
</imageobject></inlinemediaobject>
</ulink>
</entry>
<entry>
Mondo will make a catalog of all files to be backed up. This may
take up to five minutes. The list of files will be divided into
sets, approximately 4 MB (before compression) of files per set.
This typically takes one minute.
</entry>
</row>
<row>
<entry>
<ulink url="images/4.png"><inlinemediaobject><imageobject>
<imagedata fileref="images/1-mini">
</imageobject></inlinemediaobject>
</ulink>
</entry>
<entry>
Mondo calls Mindi. Mindi generates bootable floppy disk images and
auxiliary data disk images which are based on your existing Linux
distribution and filesystem. That way, you can be sure Mondo's
tools will be compatible with your existing filesystems and
binaries: Mondo's tools are your tools. Mindi takes up to five
minutes to run.
</entry>
</row>
<row>
<entry>
<ulink url="images/5tape.png"><inlinemediaobject><imageobject>
<imagedata fileref="images/5tape-mini">
</imageobject></inlinemediaobject>
</ulink>
</entry>
<entry>
Finally, Mondo begins backing up your computer. This process may
take a few minutes or a few hours, depending on how much data you
are archiving, how fast your CPU is, how much RAM you have, and so
on. It will backup your regular files and then your large files
(files larger than approximately 32MB). If you have opted to verify
your backups, Mondo will do that too.
</entry>
</row>
<row>
<entry>
<ulink url="images/10cd.png"><inlinemediaobject><imageobject>
<imagedata fileref="images/10cd-mini">
</imageobject></inlinemediaobject>
</ulink>
</entry>
<entry>
Do you want to create a boot floppy at the end? Yes, if you're a
tape or NFS user. No, if you are using CD/DVD-R[W]'s and your computer
supports bootable CD's. Tape users only need one floppy but other
users may need more. Mondo will advise accordingly.
</entry>
</row>
</tbody></tgroup></informaltable>

<itemizedlist>
<listitem>
<para>Try to boot from the first CD of the backup (or the first
floppy, if you made floppies). Choose 'Compare Mode' by typing
compare at the boot screen.</para>
</listitem>
<listitem>
<para>If you can boot, fine. If not, make a Mindi "Test" CD to
checkout the compatibility of your system. (see
<link linkend="test-mindi">Testing Mindi</link> for more
details). Remove the CD/floppy; boot your computer as usual;
execute as root</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

        bash# mindi
        bash# cd /root/images/mindi

</entry>
</row>
</tbody></tgroup></informaltable>

<para>(for CD-R)</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# cdrecord dev=0,0,0 speed=4 -eject -v mindi.iso

</entry>
</row>
</tbody></tgroup></informaltable>

<para>(for CD-RW)</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# cdrecord dev=0,0,0 speed=4 blank=fast -eject -v mindi.iso

</entry>
</row>
</tbody></tgroup></informaltable>

<para>Reboot your system with the created Mindi CD, with the BIOS
set to boot from CD. If the result is a command line in 'Expert'
mode, your system checks out. Remove the CD and reboot your
system.</para>
</listitem>
<listitem>
<para>If you still cannot boot from Mindi's CD then please e-mail
the &ML; for help.
</para>
</listitem>
</itemizedlist>
<para>When making a backup on a live system, there will always be
processes running that will write out data on the system after you
have made the backup and before you have made the compare, this
will result in difference showing up when comparing your backup.
For a full explanation and what can be done to avoid this, please
read this section.</para>
<itemizedlist>

        <listitem>
<para>This QuickStart covers the ideal case. Upon receiving any
system feedback/errors, read each related HOWTO section.</para>
<para>Example 2-1. A test backup of your /home directory to CD-Rs
using the command line</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# mondoarchive -OVc 4 -I /home -gF

</entry>
</row>
</tbody></tgroup></informaltable>

<para>The 'c' means you must be writing to CD-Rs, not CD-RWs (the
latter would require 'w' instead of 'c'). The '4' is the speed of
your CD writer. The string after -I is the path to be backed up.
The '-gF' means you are going to see the pretty yellow-on-blue
screen instead of the boring white-on-black screen. :) It also
means Mondo will not offer to create physical boot floppies for
you. It is assumed that you are able to boot from the CD which
Mondo has generated.</para>
<para>Example 2-2. A backup of your whole filesystem to NFS using
the command line</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

        bash# mkdir -p /mnt/nfs
        bash# mount 192.168.1.28:/home/nfs /mnt/nfs
        bash# mondoarchive -OVn 192.168.1.28:/home/nfs -gF[...]
        bash# umount /mnt/nfs
        bash# cdrecord dev=0,0,0 speed=4 -eject -v /root/images/mindi/mindi.iso

</entry>
</row>
</tbody></tgroup></informaltable>

<para>Note that you have to mount the NFS partition, backup to it,
unmount it, and create a boot CD to allow you to restore from
scratch if necessary. To reassure yourself that you will be able to
restore from the NFS share even if your PC is wiped, please boot
from the Mindi CD and type 'compare'. The on-screen instructions
from that point on should be sufficient.</para>
<para>Example 2-3. A backup of your whole
filesystem to tape using the command line</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# mondoarchive -OVt -d /dev/st0 -9 -L -g

</entry>
</row>
</tbody></tgroup></informaltable>

<para>In this case, we assume Syslinux is incompatible with your
boot media. For some reason, some BIOSes just don't like Syslinux.
If you find this to be the case for your computer, please use '-L'
to force Mondo to use LILO instead of Syslinux as the boot loader
for its CD/floppies. (NB: This has nothing to do with which boot
loader your hard drive uses.) Also, it is a good habit to specify
your tape streamer with '-d &lt;device&gt;'. You don't usually need
to but it's good to be on the safe side. Some computers call your
tape streamer /dev/osst0, some call it /dev/ftape, ...</para>
</listitem>
</itemizedlist>

</chapter>

<chapter id="overview"><title>Overview</title>

<sect1 id="overview-mondorescue">
<title>Mondo Rescue</title>
<para>Mondo Rescue backs up your file system to CD, tape, NFS
(archives stored remotely) or ISO's (archives stored locally).
Mondo uses afio as the backup engine; afio is a well-respected
replacement for tar. In the event of catastrophic data loss, you
may restore some or all of your system, even if your hard drives
are now blank. Mondo Rescue can do a lot of other cool
things:</para>
<itemizedlist>
<listitem>
<para>You can use Mondo to clone an installation of Linux. Just
backup the crucial stuff and exclude /home, /var/log, etc.</para>
</listitem>
<listitem>
<para>You can backup a non-RAID file system and restore it as RAID
including the root partition (if your kernel supports that).</para>
</listitem>
<listitem>
<para>You can backup a system running on one format and restore as
another format.</para>
</listitem>
<listitem>
<para>You can restructure your partitions, e.g. shrink/enlarge,
reassign devices, add hard drives, etc, before you partition and
format your drives. Mondo will restore your data and amend
/etc/lilo.conf and /etc/fstab accordingly.</para>
</listitem>
<listitem>
<para>You can backup Linux/Windows systems, including the boot
sectors. Mondo will make everything right at restore-time.
(However, do run "Scandisk" when you first boot into Windows, just
in case.)</para>
</listitem>
<listitem>
<para>You can use your Mondo backup CD to verify the integrity of
your computer.</para>
</listitem>
</itemizedlist>
<para>Mondo's principal virtue is that it protects you from the
problems that can arise when you reinstall completely from scratch.
If you want to wipe and restore your system every year just as a
matter of 'good practice', Mondo is not for you. However, if you
want to get up and running again in a hurry after someone breaks
into your computer and wipes it (or if you accidentally wipe it
yourself) then Mondo is definitely for you. It will permit you to
roll back to a known-good installation in a very short period of
time, sometimes as little as twenty minutes. Even if you backup
large amounts of data to tape daily and do not want to add yet
another backup regime, please consider backing up the core
filesystem (i.e. everything but the directories containing your
huge database and your prizewinning novel) every month or so, just
in case. You will be glad you did.</para>
<para>What is Mondo not?</para>
<para>Mondo is not an everyday backup program. It is not designed
to replace tar, afio, kbackup, etc. Mondo is designed to make it
possible to recover from scratch if necessary. Tar and afio offer a
quick, convenient way to backup small sets of files, sometimes to
removable media.</para>
</sect1>

<sect1 id="overview-mindi">
<title>Mindi</title>
<para>
Mindi Linux creates a set of boot/root floppy disk images
that will let you perform basic system maintenance on your Linux
distro. The principal virtues of Mindi's boot disks are the fact
that they contain your kernel, modules, tools and libraries. You
can ask for additional binaries (or other files) to be included on
the kit. The libraries will be added for you.
</para>
<para>Whichever modules were loaded at backup-time, they are
reloaded at boot-time. So, in theory, you will boot into almost the
same environment as you were in when you backed up. If you want to
add files to your Mindi boot disks, edit '&lt;INSTALLPATH OF
MINDI&gt;/mindi/deplist.txt' and add the files to that list. The
added files and dependencies, will be spread across the data disks
at run-time.
</para>
<para>Mindi makes sure that Mondo has all the tools it needs at
boot-time. Mondo uses fdisk, mkfs, cat, less, more, afio, gzip,
bzip2, your keyboard configuration, your glibc libraries, your
other libraries, your kernel, your modules, ... a lot! Mindi takes
care of all that, so that Mondo can get on with the job of backing
up or restoring your data.
</para>
<para>Mindi is also handy for making boot CDs/disks which stand on
their own. You do not need Mondo. Indeed, if you like, you could
use another backup/restore program with Mindi. Just add it to
Mindi's dependency list (type 'locate deplist.txt' to find it).
Mindi will include your software on its boot CD/disks the next time
you run mindi.
</para>
</sect1>


<sect1 id="overview-linuxbackup">
<title>Linux Backup</title>
<para>Mondo Rescue and Mindi Linux are used primarily as Linux
backup and cloning tools. The fall in prices of CD-RW drives and
writable discs will allow current users to keep good backups and
future users to leverage the cloning capability.</para>
<para>Tape drives are more likely to suit your needs if you run a
larger installation (or have lots of MP3's). Warning! OnStream
drives do not play well with Mondo. I do not know why. It is, in my
opinion, something which OnStream should look into. Mondo uses
fopen(), fread(), fwrite() and fclose() to interact with tape
drives. That works for most drives but some drives just don't like
that.</para>
<para>Mondo Rescue has tested thousands of times on various computers.
It worked for them.
Thousands of users testify to Mondo's stability and its ease of
use. However, please test it on your own system before you rely on
it. In fact, do not rely on any software until you have tested it
to see if it performs as expected.</para>
<para>To establish that Mondo will behave well in an emergency,
please be prepared. Run a test backup as follows:-</para>
<itemizedlist>
<listitem>
<para>Run mondoarchive without any command-line options.</para>
</listitem>
<listitem>
    <para>Backup a subset of files - e.g. /usr/local - to CD or
            tape. Say 'yes' when asked if you want to verify them.</para>
</listitem>
<listitem>
    <para>If you are not backing up to CD, please create boot
    floppies when prompted.</para>
</listitem>
</itemizedlist>
<para>Next, restore archives to your live filesystem.</para>
<itemizedlist>
<listitem>
<para>When mondoarchive terminates, run mondorestore without any
command-line options.</para>
</listitem>
<listitem><para>Insert the CD or the first boot floppy when prompted.
                Press &lt;Enter&gt;. Wait a moment.</para></listitem>
<listitem><para>Select a subset of files to restore, e.g. /usr/local/man
                and /usr/local/bin. Hit OK.</para></listitem>
<listitem><para>Restore files to /tmp or /root/RESTORED or something
                similar.</para></listitem>
<listitem><para>When mondorestore terminates, compare the restored files
                to the originals using cmp or diff.</para></listitem>
</itemizedlist>
<para>Finally, simulate an emergency restore.</para>
<itemizedlist>
<listitem>
<para>Boot from CD/floppies.</para>
</listitem>
<listitem><para>Select 'Interactive Mode' at boot-time. (Type
                'interactive' and hit &lt;Enter&gt;.)</para></listitem>
<listitem><para>Hit OK when shown the mountlist. Say 'yes' when asked if
                you accept the mountlist.</para></listitem>
<listitem><para>Select files to restore, e.g. /usr/local/man and
                /usr/local/bin. Hit OK.</para></listitem>
<listitem><para>Restore files to /tmp or /root/RESTORED or something
                similar.</para></listitem>
<listitem><para>When mondorestore terminates, please reboot and compare
                the restored files to the originals.</para></listitem>
</itemizedlist>
<para>FYI, the subroutines to repartition and reformat your drives
are very stable. If you are a RAID or LVM user, you
might&nbsp;encounter some difficulties when wiping and restoring
from scratch because of the sheer range of filesystem layouts and
the impossibility of testing Mondo on every single one. If you have
trouble, just drop to the command-line and partition/format
manually. Then, call mondorestore, select Interactive Mode, and say
'no' when asked if you want Mondo to partition or format your
drives for you.</para>
<para>You see, even if you have trouble, you still have two hands
and most of the tools you need - lvchange, pvcreate, fdisk, mkraid,
etc. - to do it manually. After you have prepped and formatted your
drives manually (if you have to), just run mondorestore again and
say 'no' when asked if you want to prep or format your drives. What
could be easier?</para>
</sect1>

<sect1 id="overview-winbackup">
<title>Windows Backup</title>
<para>Backing up windows partitions.</para>
<sect2 id="overview-winbackup-win95"><title>Windows ME/95/98</title>
<para>Verify that the partition is listed in /etc/fstab and is
mounted (e.g. /dev/hda1). Mondo will take care of everything else.
The files will be archived just like all other files in the live
file system. At restore-time, Mondo will take care of the boot
sector of /dev/hda1 prior to the restore.</para>
<para>Note: if Windows ME/95/98 is not located on /dev/hda1 or
/dev/sda1, then Mondo will not take care of the boot sector of
/dev/hda1. The user will have to boot from a DOS floppy and run SYS
C: to correct the Windows boot sector.</para>
</sect2>
<sect2 id="overview-winbackup-winnt"><title>Windows NT4/2K/XP</title>
<para>Windows NT4/2K/XP typically use the NTFS file system, not
VFAT.. The user should use '-x /dev/hda1' (or whichever device the
Windows partition resides). Mondo will treat the partition as a
biggiefile. Mondo will also add an entry to the mountlist to
reflect the size and type of the partition. The user may not edit
that partition's size at restore-time (for obvious reasons).</para>
<para>Please bear in mind that Mondo was written for Linux users.
If Mondo does not backup or restore your Windows system well, you
might want to consider reporting it to the &ML;
</para>
</sect2>
</sect1>

<sect1 id="overview-history">
<title>Mondo Rescue and Mindi Linux
History</title>
<para>Mondo Rescue was created in December 1999 by Hugo Rabson as a utility to
clone Linux/Windows installations. Norton Ghost would not do the
job, and his boss wanted to jump on the Linux bandwagon. So, he wrote
a few scripts and shoehorned them into the latest Linux-Mandrake
CD. Since that time, Mondo grew into a disaster recovery suite for
Linux and Windows. Mondo forced him to learn about the kernel, its
initrd initial ramdisk, modules, library dependencies, disk
partitioning, and the myriad differences between the Top 10 Linux
distributions.</para>
<para>The first formal release was made on February 18th, 2000.
Mondo is currently one of the top five Linux backup/restore
programs. Mondo has been compared favorably to ArcServe, Arkeia and
BRU. Although Mondo lacks the more advanced, enterprise-level
features of ArcServe and Arkeia, for workstations and small- to
medium-size servers it is ideal because it is small, fast,
efficient, stable, comes with source code, and is being actively
developed and supported.</para>
<para>
        Since November 2005, Hugo Rabson has tranfered the maintenance 
        of the Mondo Rescue suite to Andree Leidenfrost and Bruno Cornec,
        both previous developpers and packagers of the tool since nearly 
        the begining.
</para>
</sect1>

<sect1 id="overview-sysreq">
<title>System Requirements</title>
<sect2 id="overview-sysrq-hwreq">
<title>Hardware Requirements</title>

<para>Your computer must have:</para>
<itemizedlist>
<listitem>
        <para>Intel(R)-compatible CPU (ia32, x86_64/amd64 or ia64)</para>
</listitem>
<listitem>
<para>64MB of RAM (128MB recommended)</para>
</listitem>
<listitem>
<para>800MB of hard disk space free</para>
</listitem>
<listitem>
<para>CD writer, tape streamer, NFS share or some way to backup the
backups :)</para>
</listitem>
</itemizedlist>
<para>It is recommended that your computer have very good airflow.
The backup with Mondo Rescue and Mindi Linux will utilize your CPU,
CD drive and fixed disk(s) like very few other applications. With a
few hours of system backup activity, computers without sufficient
airflow may show symptoms such as not burning full CD discs. The
solution is a $20 or less additional fan at your local electronics
discount store.</para>
</sect2>

<sect2 id="overview-sysrq-kernelreq">
<title>Kernel Requirements</title>

<para>Your kernel must have:</para>
<itemizedlist>
<listitem>
<para>stable loopfs support, which means it really needs to be
2.2.19 or 2.4.7 (or later)</para>
</listitem>
<listitem>
<para>CD-ROM device support</para>
</listitem>
<listitem>
<para>ISO9660 file system support</para>
</listitem>
<listitem>
<para>initrd ramdisk support (built-in)</para>
</listitem>
<listitem>
<para>Virtual memory file system support (built-in)</para>
</listitem>
<listitem>
<para>floppy disk support (built in)</para>
</listitem>
<listitem>
<para>ext2 file system support (built-in)</para>
</listitem>
<listitem>
<para>Support for the backup media (Tape, CD-RW, NFS, Hard
disk)</para>
</listitem>
<listitem>
<para>If the backup media is CD-RW then you need SCSI emulation
also</para>
<para>vfat support in the active kernel - mindi needs this when creating
syslinux boot floppies</para>
</listitem>
</itemizedlist>
<para>Please note that the stock kernels of Red Hat/RHEL/Fedora,
    Mandrake/Mandriva, SuSE/SLES/OpenSuSE, Debian and Slackware 
    all meet Mondo's requirements. If your kernel does not meet Mondo's
    requirements then there is something wrong with it. Mondo's demands
    are not unreasonable.</para>
<para>Mondo (specifically Mindi) does not require any specific
module. It does require that your kernel support the initrd
initial ramdisk facility. Typically this is supported by the Linux
kernel. Modules used are needed to support the CD, floppy disks,
hard disks, etc. If the support is modular, then the modules will
be incorporated in a boot disk by Mindi. If the support is built-in
(static), then it will be available at boot-time by default.</para>
</sect2>
<sect2 id="overview-sysrq-swreq">
<title>Software Requirements</title>
<para>See Mondo's <ulink url="http://www.mondorescue.org/download.html">Download
page</ulink> for details.</para>
<para>Mondo requires afio, bzip2, cdrtools/cdrecord/growisofs, ncurses, newt,
isolinux/syslinux, lzo (optional), lzop (optional), mkisofs, slang,
and a few other packages.</para>
<para>Good Linux distributions provide all these packages. If yours
does not then please go to the aforementioned Download page or surf
the Net, preferably the website of the distribution you are
using.</para>
<para>Mondo's expectations are not unreasonable, either of your
Linux distribution or of your kernel. However, if your distribution
fails to meet its expectations and you cannot find out how to
resolve them, please feel free to e-mail the &ML;
</para>
</sect2>
</sect1>
</chapter>

<chapter id="installation">
<title>Installation</title>

<sect1 id="installation-mindi">
<title>Mindi Installation</title>
<para>If you are installing from a tarball then copy it to wherever
you have enough space, for example /tmp and type:</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

        bash# cd /tmp
        bash# tar -zxvf mindi-1.x.tgz
        bash# cd mindi-1.x
        bash# ./install.sh

</entry>
</row>
</tbody></tgroup></informaltable>

<para>This installs mindi additional files into /usr/local/lib/mindi and 
the program into /usr/local/sbin</para>
<para>Or, if you are installing from an RPM/deb then copy it to
wherever you have enough space, for example /tmp and type:</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# rpm -Uvh /tmp/mindi-1.x-x.i386.rpm

or

bash# dpkg -i /tmp/mindi-1.x-x.deb

</entry>
</row>
</tbody></tgroup></informaltable>

<para>This installs mindi additional files into /usr/lib/mindi and 
the program into /usr/sbin.
</para>
</sect1>

<sect1 id="installation-mondo">
<title>Mondo Installation</title>
<para>If you are installing from a tarball then copy it to wherever
you have enough space, for example /tmp and type:</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

        bash# cd /tmp
        bash# tar -zxvf mondo-2.xx.tgz
        bash# cd mondo-2.xx
        bash# make &amp;&amp; make install

</entry>
</row>
</tbody></tgroup></informaltable>

<para>This installs mondo into /usr/local/lib/mondo and installs
the programs into /usr/local/sbin</para>
<para>Or, if you are installing from an RPM/deb then copy it to copy it
to wherever you have enough space, for example /tmp and
type:</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# rpm -Uvh /tmp/mondo-2.x-x.i386.rpm

or

bash# dpkg -i /tmp/mondo-2.x-x.deb

</entry>
</row>
</tbody></tgroup></informaltable>

<para>This installs mondo into /usr/lib/mondo and installs
the programs into /usr/sbin</para>
</sect1>
</chapter>

<chapter id="test">
<title>Tests</title>

<sect1 id="test-mindi">
<title>Testing Mindi</title>

<para>Mindi is a vital part of the backup procedure. If you have
used Mondo before or if you are in a hurry, skip steps 6.2 and 6.3;
go straight to QuickStart.</para>
<para>However, if you have time or if you have been having trouble
getting Mondo to work, I would recommend trying out Mindi directly
(rather than via Mondo) to see if it can produce a bootable CD on
your system.</para>
<para>Make sure you are root while doing this, otherwise mindi will
fail, now do this.</para>
<para>If you have any problems, please:-</para>
<itemizedlist>
<listitem>
<para>less /var/log/mindi.log</para>
</listitem>
<listitem><para>feel free to edit mindi (it's a shell script, btw) to try
                to fix the problem yourself</para></listitem>
<listitem><para>contact the &ML; if you get stuck.</para></listitem>
</itemizedlist>
<para>Type:-</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# mindi

</entry>
</row>
</tbody></tgroup></informaltable>

<para>Example screen output, selecting to use your own kernel, to
create boot disks, and to create a bootable CD image:</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

# mindi
Mindi Linux mini-distro generator v1.06-r343

Latest Mindi is available from http://mondorescue.berlios.de

BusyBox sources are available from http://www.busybox.net

------------------------------------------------------------------------------
Do you want to use your own kernel to build the boot disk (y/n) ?y
Would you like to use LILO (instead of syslinux)
for your boot CD/floppies (y/n) ?n
Analyzing dependency requirements                               Done.
Making complete dependency list                                 Done.
Analyzing your keyboard's configuration.

Adding the following keyboard mapping tables: us-latin1         Done.
Assembling dependency files...................................................................                                                  Done.
The files have been subdivided into 5 directories.                              Your mountlist will look like this:-
    Finding all volume groups
  No volume groups found
  No volume groups found
  No volume groups found
  No volume groups found
        DEVICE          MOUNTPOINT      FORMAT          SIZE (MB)
        /dev/hda1       /               ext3                399
        /dev/hda9       /home           ext3              48478
        /dev/hda6       /usr            ext3               4999
        /dev/hda7       /var            ext3               1000
        /dev/hda5       swap            swap                349
        /dev/hda8       swap            swap               2003
    Finding all volume groups
  No volume groups found
  No volume groups found
  No volume groups found
  No volume groups found
Tarring and zipping the groups..................                Done.
Creating data disk #1...#2...#3...#4...#5...                    Done.
Making 1722KB boot disk...........................1440+0 enregistrements lus.
1440+0 enregistrements écrits.
mke2fs 1.38 (30-Jun-2005)
cp: écriture de `vmlinuz': Aucun espace disponible sur le périphérique
Failed to copy /boot/vmlinuz-2.6.12-15mdk-i686-up-4GB to ramdisk

Warning - failed to create 1.44MB boot/root floppies

Warning - failed to create 1.72MB boot image. Please reduce your kernel's size

if you want to make a 1.72MB floppy disk.

Making 2880KB boot disk...........................mkfs.vfat 2.10 (22 Sep 2003)
... 2880 KB boot disks were created OK                          Done.
In the directory '/root/images/mindi' you will find the images:-
   mindi-data-1.img    mindi-data-2.img    mindi-data-3.img    mindi-data-4.img    mindi-data-5.img mindi-root.1440.img
Would you like to create boot+data floppy disks now (y/n) ?n
Shall I make a bootable CD image? (y/n) y
NB: Mindi's bootable CD always uses isolinux.

For a bootable CD w/LILO, please use Mondo.

Finished.

Boot and data disk images were created.

#
        
</entry>
</row>
</tbody></tgroup></informaltable>

<para>If your kernel is too large (more than about 900KB) then you
cannot make boot floppies, although you can still make a bootable
CD image. The easiest way to test Mindi in either case is to say
'n' to its first question and 'y' to its second, then use the
separate application cdrecord to make a bootable CD-R or
CD-RW.</para>
<para>Use the cdrecord application to write the CD image:</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

        bash# cd /root/images/mindi
        bash# cdrecord -scanbus

</entry>
</row>
</tbody></tgroup></informaltable>

<para>The output of the above call to cdrecord will tell you your
CD writer's node. It is usually '0,0,0'. Choose one of the
following calls to write the CD, depending on whether the disk in
the drive is a CD-R or a CD-RW. Please replace 'x,x,x' with your
writer's node. For further information, type 'man cdrecord" from a
Linux command line.</para>
<para>If writing to a CD-RW Drive/Disc:</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# cdrecord -v blank=fast dev=x,x,x speed=4 mindi.iso (for CD-RW)

</entry>
</row>
</tbody></tgroup></informaltable>

<para>If writing to a CD-R Drive/Disc:</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# cdrecord -v dev=x,x,x speed=4 mindi.iso (for CD-R)

</entry>
</row>
</tbody></tgroup></informaltable>
</sect1>

<!--
<sect1 id="test-mondo">
<title>Testing Mondo</title>
</sect1>
-->
</chapter>

<chapter id="backup">
<title>Backup</title>

<sect1 id="backup-recommandations">
<title>Recommandations</title>
<itemizedlist>
<listitem>
<para>Shut down all possible applications (this minimizes any
        compare differences following the backup). Especially shutdown 
        properly any running database on your system, as the recovery 
        may lead to corrupted data.</para>
</listitem>
<listitem>
<para>Type:</para>
</listitem>
</itemizedlist>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# mondoarchive

</entry>
</row>
</tbody></tgroup></informaltable>

<para>For most users, that should be enough. :-) Mondoarchive will
usually autodetect your hardware and configure it for you.</para>
<para>If you are a power user (or you like to control every detail
of how Mondo runs) then you may want to look at the command-line
switches. For example:-</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# mondoarchive -Ow9 -gF -I /home

</entry>
</row>
</tbody></tgroup></informaltable>

<para>cdrecord will tell you where your CD recorder lives, in SCSI
terms, which looks like '0,0,0'. The previous call to mondoarchive tells
Mondo to backup everything to a 4x CD-RW drive that has
a CD-RW disk in it. (Use -Oc instead of -Ow if you are using
CD-R.)</para>
<para>Please put the first CD-R(W) in the drive now. You will be
prompted to insert CD #2 but you will not be prompted to insert the
first disk. However, if you forget, do not worry: if Mondo fails to
write the first (or any) disk, it will offer to retry, abort or
fail.</para>
<para>Find the speed/compression
compromise that best suits your needs. Here maximum (-9) compression level is used.</para>
<para>If you are using cron then please use -F to make sure that
Mondo does not prompt you to create bootable floppy disks. Cron
does not handle user interaction well because it pipes stdin and
stdout specially. Please consult cron's manual for more
information. Jesse Keating has written a script for cron/Mondo
users. It is available on the
<ulink url="http://www.mondorescue.org/docs/docs.html">Documentation</ulink>
page.</para>
</sect1>

<sect1 id="backup-cmd">
<title>Backup Commands and Options</title>

<para>Backup Command:</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

mondoarchive &lt;-option1&gt; &lt;-option2&gt; ... &lt;-optionN&gt;

</entry>
</row>
</tbody></tgroup></informaltable>

<para>E.g.,</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# mondoarchive -E "/mnt/dos /mnt/cdrom" -9 -Oc 8

</entry>
</row>
</tbody></tgroup></informaltable>

<para>Would create backup CD to a CD-R disc at the highest
compression level, writing at speed 8 and ignoring the /mnt/dos and
/mnt/cdrom directories.</para>
<para>To see a detailed list of switches and their meaning, see the
<ulink url="http://www.mondorescue.org/download/mondoarchive.1.html">HTML
man page</ulink> on the website or type 'man mondoarchive' at the
console.</para>
<sect2 id="backup-cmd-cdr">
<title>Standard Example With CD-R</title>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# mondoarchive -Oc 2 -g

</entry>
</row>
</tbody></tgroup></informaltable>

<para>Replace '2' in '-Oc 2' with the writer's speed. If
mondoarchive cannot find your CD-R then please add '-d 0,0,0' (or
whatever your CD writer's SCSI node is; usually, it is 0,0,0) to
the call.</para>
<para>Please insert the first disk in the writer while the PC is
chugging away. If Mondo needs additional CD-R(W) then it will ask
for them.</para>
</sect2>
<sect2 id="backup-cmd-cdrw">
<title>Standard Example With CD-RW</title>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# mondoarchive -Ow 2 -g

</entry>
</row>
</tbody></tgroup></informaltable>

<para>Replace '2' in '-Ow 2' with the writer's speed.</para>
</sect2>
<sect2 id="backup-cmd-tape">
        <title>Standard Example With Tape</title>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# mondoarchive -Ot -d /dev/st0 -g

</entry>
</row>
</tbody></tgroup></informaltable>

</sect2>
<sect2 id="backup-cmd-failsafe">
        <title>Standard Example With Failsafe kernel</title>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# mondoarchive -k FAILSAFE -Ow 2

</entry>
</row>
</tbody></tgroup></informaltable>

<para>If you have problems during the restore phase, due to your kernel 
        (which may be the case on some distributions), you may want to explore the Failsafe
        approach, In order for this option to work you'll have to get 
        the mindi-kernel tarball or package for your distribution.</para>
</sect2>
<sect2 id="backup-cmd-network">
        <title>Standard Example With Network Backup</title>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

        bash# mount 192.168.1.3:/home/nfs -t nfs /mnt/nfs
        bash# mondoarchive -OVn 192.168.1.3:/home/nfs -g -s 200m
        bash# umount /mnt/nfs

</entry>
</row>
</tbody></tgroup></informaltable>

<para>The resultant ISO's can be burned to CD's if you want (which
isn't a good idea unless you're a Mondo expert because they'll try
to restore over a network by default, which is silly because the
archives are on the CD's). Or, you can boot from the Mindi floppies
(or mondorescue.iso) and hit ENTER a few times to restore.</para>
<para>Those ISO images can also be used for a PXE restore. For this 
        to work, please refer to the file README.pxe provided with 
        your mindi package.
</para>
</sect2>
</sect1>
</chapter>

<chapter id="compare">
<title>Compare</title>
<para>Before you trust your backup CD, make sure your BIOS can boot
CD (and that it is configured to do so).</para>
<itemizedlist>
<listitem>
<para>Boot from the first CD.</para>
</listitem>
<listitem>
<para>Type:</para>
</listitem>
</itemizedlist>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

LILO: compare

</entry>
</row>
</tbody></tgroup></informaltable>

<para>Follow the on-screen instructions. This will compare your
backup against your original file system.</para>
<para>FYI, no bad archives have been created since May 2000. Having
said that, I would still encourage you to run Compare before
trusting the backups.</para>
<para>To view the file differences, look at the file
'/tmp/changed.txt'. Normal differences include logs and other
dynamic system files that changed during the time of the backup
process. If only a few files differ - e.g. files in /var, files
ending in '&amp;#732;', logs, temporary files, /etc/mtab,
/etc/adjtimex - then you know the archives are good. Your logs will
change over time, too. Bear in mind that a difference between the
backup and the live copy does not&nbsp;indicate a flaw in Mondo. It
indicates that you or your filesystem changed the files, so the
backup is no longer 100% up to date. However, that is inevitable,
as your filesystem changes from moment to moment (which is why you
back it up regularly).</para>

</chapter>

<chapter id="restore">
<title>Restore</title>

<sect1 id="restore-overview">
<title>Overview</title>

<para>I hope you don't have to restore from scratch very often.
It's nerve-wracking until you realize that Mondo's restore engine
is very reliable.
</para>
<para>If you find that you cannot make your PC boot from the CD,
take heart: the first backup CD of each set contains floppy disk
images to give you the same functionality as the CD (minus the
archives, of course) on floppies. Remember, your Mondo CD is a
fully functional CD-based mini-distribution as well as a recovery
CD.</para>
<para>You can choose from the following modes:</para>

<variablelist>
<varlistentry><term>Interactive</term>
<listitem><para>Restore step-by-step, or restore a subset of the
archives. This is the method you should mainly use for your
recovery needs.</para>
</listitem></varlistentry>
<varlistentry><term>Nuke</term>
<listitem><para>Wipe your drives and restore everything,
automatically and unattended. Warning: This does exactly what is
says, so be carefull using it.</para>
</listitem></varlistentry>
<varlistentry><term>Expert</term>
<listitem><para>Boot to a shell prompt. If you want to do anything
creative, you should boot into Expert Mode. It's called expert, I
think that says it all.</para>
</listitem>
</varlistentry>
</variablelist>

<para>If the CD is not found during the initial restore CD boot
attempt, reboot the PC a second time prior to reporting failure.
Occasional timing errors and hardware/software/system conflicts do
occur.</para>
</sect1>

<sect1 id="restore-tips">
<title>Tips and Tricks</title>

<para>Ideally, restore your system to a spare hard drive to test
the integrity and reliability of your disks. To do that, either
edit your mountlist to make the devices point to your spare hard
drive, or swap your hard drive cables between boots.</para>
<para>At a bare minimum, compare your CD against your file system
before you decide whether to trust them.</para>
<para>To test Mondo's ability to handle your LILO or GRUB boot
loader and accompanying configuration file:</para>
<itemizedlist>
<listitem>
<para>Boot from the backup CD into Expert Mode</para>
</listitem>
<listitem>
<para>Type:</para>
</listitem>
</itemizedlist>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# mondorestore --mbr

</entry>
</row>
</tbody></tgroup></informaltable>

<itemizedlist>
<listitem>
<para>To fix any mess it made (not that it should) type:</para>
</listitem>
</itemizedlist>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

        bash# mount-me
        bash# chroot /mnt/RESTORING
        bash# lilo OR grub-install '(hd0)'
        bash# exit
        bash# unmount-me

</entry>
</row>
</tbody></tgroup></informaltable>

<itemizedlist>
<listitem>
<para>If it did not work then please copy /tmp/mondo-restore.log to
a floppy (or to your hard disk, USB key, ...), gzip it and e-mail it to the
&ML;.</para>
</listitem>
</itemizedlist>

<sect2>
    <title>Barebones (Nuke) Restore</title>
<para>Imagine that your hard drives happen to be wiped,
deliberately or accidentally. Or, imagine that you want to clone
your existing operating system. In either case, you want to run in
Nuke Mode.</para>
<para>If you want to wipe everything and restore your whole system
from CD, please:</para>
<itemizedlist>
<listitem>
<para>Use the -H option when invoking mondoarchive</para>
</listitem>
<listitem>
<para>Boot from the first Mondo CD</para>
</listitem>
<listitem>
<para>Press RESTORE&lt;enter&gt;</para>
</listitem>
<listitem>
<para>Insert the subsequent CD when asked</para>
</listitem>
<listitem>
<para>Watch the screen for errors</para>
</listitem>
</itemizedlist>
<para>That's it. The restoration process for tape or NFS users is
similarly easy: just boot, answer the on-screen prompts, and
wait.</para>
<para>Now, should something go wrong, you will be able to examine
/tmp/mondo-restore.log to see what happened. All is not lost. You
can fdisk and format the partitions yourself, using the tools that
come with the CD. You can then run mondorestore in Interactive Mode
and say 'no' when asked if you want Mondo to partition/format your
drives.</para>
<para>If you want to see exactly what Mondo is doing while it is
restoring, press &lt;Alt&gt;&lt;left cursor&gt; to view its
logfile, in a virtual console, scrolling past.</para>
</sect2>
<sect2>
<title>Interactive Restore</title>
<para>Interactive Mode is for people who have lost a subset of data
from their live file system, or perhaps who have lost some data
from their latest backup and want to restore a subset of data from
an earlier backup. If you want to restore only some files or if you
do not want to prep/format your drives, then you should boot into
Interactive Mode. The interactive mode will provide an 'Editing
mountlist screen' that allows you to setup a different disk
geometry.</para>
<para>To move up and down between partitions in the 'Editing
mountlist screen', use the Up and Down arrows. To move between the
main window and the buttons at the bottom, use the Left and Right
cursor keys. TAB shifts focus from one screen item to the other in
a haphazard fashion, owing to the complexities of the Newt
library.</para>
<para>If you want to restore selectively, just press &lt;enter&gt;
and follow the on-screen instructions. You will be asked to say
yes/no to a range of questions.</para>
<para>If you are planning to modify your partition table, you would
do well to read up on the partition layout and the use of fdisk, it
gives you some pointers on how to best lay out partitions.
You can find a good guide at 
<ulink url="http://www.ibiblio.org/pub/Linux/docs/HOWTO/mini/Partition/index.html">http://www.ibiblio.o
rg/pub/Linux/docs/HOWTO/mini/Partition/index.html</ulink></para>
<para>If you want to restore a subset of the backup then:</para>
<itemizedlist>
<listitem>
<para>Boot from the CD</para>
</listitem>
<listitem>
<para>Type:</para>
</listitem>
</itemizedlist>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# interactive

</entry>
</row>
</tbody></tgroup></informaltable>

<itemizedlist>
<listitem>
<para>Then, after booting, answer the questions as follows:</para>
</listitem>
</itemizedlist>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

        Do you want to partition your devices? no
        Do you want to format them? no
        Do you want to restore everything? no
        Do you want to restore something? yes
        Which path do you want to restore? /mydata [e.g.]
        Do you want to run LILO to setup your boot sectors? Yes

</entry>
</row>
</tbody></tgroup></informaltable>

</sect2>

<sect2>
<title>Expert Restore</title>
<para>If you are planning to modify your partition table, you would
do well to read up on the partition layout and the use of fdisk, it
gives you some could pointers on how to best lay out partitions.
You can find good a guide at 
<ulink url="http://www.ibiblio.org/pub/Linux/docs/HOWTO/mini/Partition/index.html">http://www.ibiblio.o
rg/pub/Linux/docs/HOWTO/mini/Partition/index.html</ulink></para>
<para>To restore manually, please:</para>
<itemizedlist>
<listitem>
<para>Boot from the first CD, then type:</para>
</listitem>
</itemizedlist>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# expert

</entry>

</row>
</tbody></tgroup></informaltable>

<itemizedlist>
<listitem>
<para>Then do whatever you like. :) You may type the following, of
course:</para>
</listitem>
</itemizedlist>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# mondorestore

</entry>
</row>
</tbody></tgroup></informaltable>
</sect2>
        
<sect2>
<title>Modified partitions - Restore to a different disk geometry</title>
<para>One of the nice things about Mondo is that it lets you wipe
your existing system and restore it in any layout you like (within
reason). You can move from non-RAID to RAID,install and utilize
additional drives, move from ext2 to ReiserFS, etc., all without
risking the loss of data.</para>
<para>If the user excluded a particular partition from backup and
specifically excluded it from the mountlist itself using -E then
Mondo will insert a small (32MB) partition at restore-time, in
order to avoid having to re-jig fstab, the partition table,
etc.</para>
<para>To do this:</para>
<itemizedlist>
<listitem>
<para>Boot into Expert Mode, then type:</para>
</listitem>
</itemizedlist>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# mondorestore

</entry>
</row>
</tbody></tgroup></informaltable>

<itemizedlist>
<listitem>
<para>(edit the mountlist using the on-screen editor)</para>
</listitem>
</itemizedlist>
<para>If you want to move from ext2 to ReiserFS, you can do it here
(so long as your kernel supports ReiserFS). Ditto for XFS, JFS or
ext3.</para>
<para>Mondorestore will try to modify your /etc/fstab to reflect
changes you have made to the mountlist. If you are not using LILO,
you can still create your own /mnt/RESTORING/etc/lilo.conf and run
lilo -r /mnt/RESTORING to configure your boot sectors and Master
Boot Record.</para>
<para>Mondo (technically, Mindi on behalf of Mondo) creates a file
called a mountlist. This can be found on the ramdisk at
/tmp/mountlist.txt; it looks something like this:</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

        /dev/hda1   /mnt/windows    vfat        4096000
        /dev/hda5   /               reiserfs    6023000
        /dev/hda6   /tmp            xfs         955000
        /dev/hda7   /usr            ext3        4096000

</entry>
</row>
</tbody></tgroup></informaltable>

<para>It is fairly easy to understand the list. Each line refers to
a single device/partition. The line format is:</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

&lt;device&gt; &lt;partition&gt; &lt;format&gt; &lt;Kilobytes&gt;

</entry>
</row>
</tbody></tgroup></informaltable>

<para>If you have added a hard drive and want to take advantage of
the additional space, you could amend the above mountlist to
read:</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

        /dev/hda1   /mnt/windows    vfat        6096000
        /dev/hda5   /               reiserfs    9123000
        /dev/hda6   /tmp            xfs         955000
        /dev/hdb1   /usr            ext3        8192000
        /dev/hdb2   /home           xfs         8192000

</entry>
</row>
</tbody></tgroup></informaltable>

<para>This assumes that your old hard drive is /dev/hda and the new
hard drive is /dev/hdb.</para>
<para>Or, if you want to add RAID support, create a new
/etc/raidtab on the ramdisk (which is beyond the scope of this
HOWTO) and then write a mountlist like this:</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

        /dev/hda1   /mnt/windows    vfat        6096000
        /dev/md0    /               reiserfs    9123000
        /dev/md1    /tmp            xfs         955000
        /dev/md2    /usr            ext3        8192000
        /dev/md3    /home           xfs         8192000

</entry>
</row>
</tbody></tgroup></informaltable>

<para>So long as your /etc/raidtab file is sane, Mondo can
automatically partition and format your disks for you, including
the RAID devices.</para>
<para>Once you have finished editing /tmp/mountlist.txt using
mondorestore's built-in editor then you may choose 'OK'. Please
note that this will not write anything to your hard disk. You will
only reformat or repartition your disks if you say 'Yes' when asked
if you want to do those things.</para>
</sect2>

<sect2>
<title>Advanced</title>
<para>It is now possible to restore to a live filesystem using
Mondo. In other words, you do not have to boot your PC from your
CD/floppy in order to restore files. Mondo was originally designed
for disaster recovery - situations in which you cannot boot your
PC. If you can boot your PC, it is not really a disaster, is it? :)
Well, if you have wiped out your priceless collection of "MTV's
Bjork Unplugged" MP3's, perhaps it is. Anyway, just type this as
root</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# mondorestore

</entry>
</row>
</tbody></tgroup></informaltable>

<para></para>
<informaltable><tgroup cols="2"><tbody>
<row>
<entry>
<ulink url="images/rest1.png"><inlinemediaobject><imageobject>
<imagedata fileref="images/rest1-mini">
</imageobject></inlinemediaobject>
</ulink>
</entry>
<entry>
Choose your type of backup media. The live restoration process is
very similar to what you'll experience if you type mondorestore
with no parameters after booting from a Mondo CD/floppy.
</entry>
</row>
<row>
<entry>
<ulink url="images/rest2.png"><inlinemediaobject><imageobject>
<imagedata fileref="images/rest2-mini">
</imageobject></inlinemediaobject>
</ulink>
</entry>
<entry>
Hit 'OK' when you have inserted the tape/CD. If you generated a
tape backup, the tape itself should be enough. If you generated a
CD backup, the first CD should be enough. Otherwise, you may need
the boot floppy.
</entry>
</row>
<row>
<entry>
<ulink url="images/rest3.png"><inlinemediaobject><imageobject>
<imagedata fileref="images/rest3-mini">
</imageobject></inlinemediaobject>
</ulink>
</entry>
<entry>
Flag the files and directories you wish to restore. Use the 'More'
and 'Less' buttons to open and close subdirectories.
</entry>
</row>
<row>
<entry>
<ulink url="images/rest4.png"><inlinemediaobject><imageobject>
<imagedata fileref="images/rest4-mini">
</imageobject></inlinemediaobject>
</ulink>
</entry>
<entry>
Specify the location to restore the files to. In general, '/' is
appropriate. If you do not want to overwrite newer versions of the
files you are restoring then specify /tmp/BKP or similar as the
restore path.
</entry>
</row>
<row>
<entry>
<ulink url="images/rest5.png"><inlinemediaobject><imageobject>
<imagedata fileref="images/rest5-mini">
</imageobject></inlinemediaobject>
</ulink>
</entry>
<entry>
Mondorestore will retrieve configuration information from the
media. (The sample screen is for tape users. CD users will see
something different.)
</entry>
</row>
<row>
<entry>
<ulink url="images/rest6.png"><inlinemediaobject><imageobject>
<imagedata fileref="images/rest6-mini">
</imageobject></inlinemediaobject>
</ulink>
</entry>
<entry>
Data will be restored to the hard disk - first the regular files,
then any big (32MB or greater) files in the restore set.
</entry>
</row>
</tbody></tgroup></informaltable>

<para>I hope this manual is proving to be useful to you.</para>
</sect2>
</sect1>

</chapter>

<chapter id="faq">
<title>FAQ</title>

<sect1 id="faq-overview">
<title>Overview</title>
<para>Are the errors from Mindi or Mondo? Look at
/var/log/mondo-archive.log, /var/log/mindi.log or the
mondo.err.xxxxx.tgz log indicated by the screen message. Pipe
screen errors which relate to the creation of boot disk(s) and or
data disk(s) to a text file.</para>
<para>See the &WWW; for details. If you are going to e-mail
&ML; then
please attach that text file (zipped!) and give :</para>
<itemizedlist>
<listitem>
<para>Your kernel version</para>
</listitem>
<listitem>
<para>Your Linux distro's name and version</para>
</listitem>
<listitem>
<para>Whether your kernel supports initrd and loopfs; it should!</para>
</listitem>
<listitem>
<para>What sort of PC you are using, including hard disk configurations</para>
</listitem>
</itemizedlist>
<para>Mondo is freely available under the GPL and you are given it for no charge.
When you e-mail the &ML;, please bear that in mind.</para>
</sect1>
<sect1 id="faq-general">
<title>General Questions</title>

<qandaset>
<qandaentry>
        <question><para>Q: What is "Mindi"?</para></question>
        <answer>
<para>A: Mindi, a.k.a. Mindi-Linux, makes a mini-distribution from
your kernel, modules, modules, tools and libraries. It can also
generate an El Torito 2.88/5.76MB boot disk image. Mondo uses Mindi to
create a mini-distro, then boots from it and runs on it.</para>
</answer>
</qandaentry>
<qandaentry>
        <question><para>Q: Why is it called "Mondo"?</para></question>
        <answer>
<para>A: The Teenage Mutant Ninja Turtles described cool things as
'mondo'. Hugo Rabson wasn't sure what to call this project. 'Faust' was one
idea he had, partly as a dig at his former boss who practically owned
him because of his legal status at the time. In the end, He chose
something short and distinctive.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Mondo does not work on my system. It
                keels over and dies. What's wrong?</para></question>
<answer>
        <para>A: It works on Red Hat 7.x/8/9, RHEL 2.1/3/4, Mandrakelinux 8.x/9.x/10.x, Debian 3.0, most flavors
                of SuSE/SLES, some flavors of Slackware, etc.
The more distributions we support, the more moving targets we have to
hit. Please bear this in mind when e-mailing the list. :) If you
would like to help us by beta-testing Mondo (or Mindi) on your PC
then we would be very interested in working with you to work around
the eccentricities of your Linux distro. However, rest assured, 90%
of the bugs reported are actually symptoms of FooLinux X.Y's
unique way of doing things.</para>
<para>Please send a copy of <filename>/var/log/mondo-archive.log</filename> to the &ML;
along with a description of your distro, your kernel, etc.
Oh, and before sending it, please try to read it.</para>
</answer>
</qandaentry>
<qandaentry>
        <question><para>Q: What if the error is in Mindi?</para></question>
        <answer>
                <para>A: Please send a copy of <filename>/var/log/mindi.log</filename> to the &ML;
along with a description of your distro, your kernel, etc.
Oh, and before sending it, please read it asit's much easier to understand it.</para>
</answer>
</qandaentry>
<qandaentry>
        <question><para>Q: Can I trust Mondo?</para></question>
        <answer>
<para>A: Mondo has generated reliable archives since May 2000.
Lost data occured by using bad CD-R disks and not verifying their
contents. Some users have not tried booting from their CD until
crunch time. Remember to boot into Compare Mode to verify the
backup before you trust it. If Mondo did not work, you would not be
reading this. If it does not work for you, your kernel is usually
the culprit. Check <link linkend="overview-sysrq-kernelreq">Linux Kernel
support</link> to see what your kernel should support. Please
e-mail the list if you need some help with this.</para>
</answer>
</qandaentry>
<qandaentry>
        <question><para>Q: How do I report a bug?</para></question>
        <answer>
                <para>A: E-mail the bug report (mondo.err.xxxxx.tgz) to the &ML;. 
                        Ok you've read it already but it's really important if you want help.
If you don't send a logfile then there isn't a lot that we can do for you, so
PLEASE include a logfile at the very least.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: I think Mondo should (...insert
suggestion here...) and I have rewritten it accordingly. Would you
like to see my patch?</para></question>
<answer>
<para>A: Absolutely! :-) The best way for you to make Mondo do what
you want is to modify it and then send the patch. That way, we
can all benefit.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: I think Mondo should (...insert
suggestion here...); will you incorporate this feature for me,
please?</para></question>
<answer>
<para>A: please enter the suggestion in our feature system at &WWW;
</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Mondo says, "XXX is missing," and
                then terminates. What's wrong?</para></question>
<answer>
<para>A: A good Linux distribution should contain XXX but the
designers, in their infinite wisdom, decided not to include that
particular tool. Check <!--<link linkend="linuxpackages">-->Related
        Linux Packages<!--</link>--> and install the missing package. If that
fails, contact the vendor/distributor/manufacturer/designer of your
distro.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Can Mondo handle multi-CD backups and
                restores?</para></question>
<answer>
<para>A: Yes, up to twenty CD per set. This 20-CD limit results
from laziness on mondorescue's part. I'll be removed in the future. However, if
your system occupies more than 20 CD, may it's time for another type of media ?
</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Can Mondo handle Linux/Windows
                dual-boot systems?</para></question>
<answer>
<para>A: Yes. If your system currently boots into Linux or Windows
via LILO, you can backup and restore both OSes at the same time
using Mondo. If you are using NTFS then add the switch, '-x
&lt;device&gt;'.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Can Mondo backup Windows-only
                systems?</para></question>
<answer>
<para>A: Not at the moment.
</para>
</answer>
</qandaentry>
<qandaentry>
        <question><para>Q: Does Mondo support LVM?</para></question>
        <answer>
<para>A: Mondo supports LVM v1 and v2. Mondo backs up and restores your
existing setup but it does not make it easy for you to change your
LVM configuration, at the moment. You have to edit <filename>/tmp/i-want-my-lvm</filename> at boot-time
to do that.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: What if I don't use LILO? What if I
                use GRUB?</para></question>
<answer>
<para>A: GRUB is supported by Mondo.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: I get the error, 'Cannot find
                /tmp/dev.0' or 'Cannot mount device 0x0701'; what do I do?</para></question>
<answer>
        <para>A: Please free up <filename>/dev/loop0</filename> using 'losetup /dev/loop0 -d' to
unmount that loop device. If your OS will not let you do that,
contact your local support group or Linux vendor.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Can I create a Mondo CD and then use
                it to create an archive of any OS on any PC?</para></question>
<answer>
<para>A: Not yet. You can use Mondo to backup Linux or
Linux/Windows dual boot. One day, Mondo will let you backup
partitions it can't read or write, by treating each partition as
one long file to be backed up. This file will be chopped,
compressed and archived like any other big file.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Why do you insist on putting floppy
disk images on Mondo CD? They waste space and I never use them. The
CD works just fine, so why keep the floppy disk images?</para>
</question>
<answer>
<para>A: Because. It helped us in the past. If you
really, truly want them gone then please submit a patch to make
them optional.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Why doesn't the Mondo project have a
cool-looking animal logo?</para></question>
<answer>
<para>A: Excellent question! Please submit graphics of candidate
        animal logos!</para>
        </answer>
</qandaentry>
<qandaentry>
<question><para>Q: Is there a Mondo user 'Code of
                Conduct?</para></question>
<answer>
<para>A: Yes. Read the HOWTO. Submit patches. Recommend realistic
improvements. Be courteous to other users on the discussion list.
Do not whine.</para>
</answer>
</qandaentry>
</qandaset>
</sect1>

<sect1 id="faq-booting">
<title>Booting and Kernel related Questions</title>
<qandaset>
<qandaentry>
<question><para>Q: When I try to boot from the Mondo CD,
it says, "VFS: Unable to mount root fs." I am using an old Debian
distro. What do I do?</para></question>
<answer>
<para>A: Ask Debian's designers why they, unlike every other distro
I can find, have included cramfs and other 'goodies' with their
kernel. In the meantime, please use '-k FAILSAFE' in your command
line when calling Mondo.</para>
<para>A: From Sarge onwards, all stock Debian 2.6 kernels should work fine. If
you are still using stock Debian 2.4 kernels, FAILSAFE is the way to go.
Of course, if you have compiled your own kernel and experience problems,
FAILSAFE is the way to go as well, but this is not really
Debian-specific.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: When I try to boot from the Mondo CD,
it says, "Cannot mount root fs - kernel panic," or something
similar. What do I do?</para></question>
<answer>
<para>A: Recompile your kernel (or use '-k FAILSAFE'). Take a look
at <link linkend="overview-sysrq-kernelreq">Linux Kernel support</link> to
see what you're kernel must support.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: When I try to boot from the Mondo CD,
                it says, "UPGRADE YOUR RAM". What does that mean?</para></question>
<answer>
<para>A: Recompile your kernel and add Virtual memory file system
support. Take a look at <link linkend="overview-sysrq-kernelreq">Linux
Kernel support</link> to see what you're kernel must support. (Of
course, if your PC has less than 64MB of RAM, you could always...
what's the phrase? I know, upgrade your RAM!)</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: When I try to boot from the Mondo CD,
it says something about not finding my CD-ROM drive and then it
blames the kernel. What does that mean?</para></question>
<answer>
        <para>A: Your kernel must support initrd, loopfs, IDE|SCSI|USB CD-ROM's, and
ramdisks. Take a look at <link linkend="overview-sysrq-kernelreq">Linux
Kernel support</link> to see what you're kernel must support. If
your kernel does not support these things, Mondo will not boot from
your CD. However, when running Mindi, you may choose to use _its_
kernel instead of your own. In addition, you may boot from floppy
disk images instead the CD: copy the disk images from the CD
/images directory to floppy disks, using 'dd'. Take a look at
<link linkend="copybootdatadisk">Copy boot data
disks</link> on how to make those.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: The Mondo CD/floppy takes ages to
                boot. How can I speed it up?</para></question>
<answer>
<para>A: Edit mindi (it's a shell script, btw) and change
LILO_OPTIONS="" to LILO_OPTIONS="-c". This enables map compaction
in lilo and speeds up booting, for more info see the lilo man
page.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: I made a Mondo CD using the failsafe
kernel (i.e. I said 'no' when Mondo asked if I wanted to use my own
kernel). It still doesn't boot. Help!</para></question>
<answer>
<para>A: OK, now that is a bug. :-) I included a kernel with Mondo
(technically, with Mindi, which Mondo uses) to make sure that users
could use Mondo despite flaws in their own kernels. If you are
using Mondo/Mindi's kernel but still cannot boot from your Mondo CD
then please e-mail the &ML;.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: What if my PC won't boot from a
                CD?</para></question>
<answer>
<para>A: Copy the image files from the CD /images directory, using
the dd command. Take a look at
<link linkend="copybootdatadisk">Copy boot data
disks</link> on how to make those. Then boot from the first
floppy; follow it up with the data disks; finally, type 'mount
/mnt/cdrom' and then utilize the restore script as usual, e.g.
mondorestore.</para>
<para>A: You may also want to boot using the network with PXE. 
        Look at the README.pxe file of mindi to know more details on how.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: But why won't Mondo boot from my CD?
It says my kernel is flawed/outdated/ whatever, and when I wrote to
the ML, they told me the same thing... but I still don't get it. I
mean, my kernel works for everything else. Why not Mondo?</para></question>
<answer>
<para>A: Because Mondo makes a boot disk using your kernel. I bet
your other software doesn't do that. Also, not all kernels are
suitable for boot disks. I'm sorry but that's Life. Upgrade your
kernel and/or recompile it. Take a look at
<link linkend="overview-sysrq-kernelreq">Linux Kernel support</link> to see
what you're kernel must support.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Why do I only need a boot disk if I'm
                using a tape drive? Where are the data disks?</para></question>
<answer>
<para>A: On the tape. :-) The first 32MB of the tape will be set
aside for a large tarball containing the data disks, a list of all
files backed up, and other sundries. If Mondo and Mindi do their
respective jobs then you won't need additional floppies, just the
boot floppy and the tape(s).</para>
<para>For the moment mondorescue doesn't support OBDR for tapes. 
        Feel free to produce patches for it :-)</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Why does it say, "Process accounting
                FAILED" when I reboot?</para></question>
<answer>
<para>A: You were using Process Accounting. Red Hat (or whichever
distro you are using) does not provide a startup/shutdown script
yet. So, when you try to backup the process log, it just grows and
grows as Mondo tries to back it up. Mondo doesn't back it up
anymore and that's why. The unfortunate side-effect is... well,
what you see on your screen. Type 'touch /var/log/pacct' and then
'paccton' to fix the error message.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Why does it say,
&amp;#8220;request_module[block-major-1]: Root fs not mounted VFS:
Cannot open root device "100" or 01:00 Please append a correct
"root=" boot option kernel panic: VFS: Unable to mount root fs on
01:00&amp;#8221; when i boot from the CD?</para></question>
<answer>
<para>A: Recompile your kernel and add initrd support. Take a look
at <link linkend="overview-sysrq-kernelreq">Linux Kernel support</link>to
see what you're kernel must support.</para>
</answer>
</qandaentry>
<qandaentry>
<question>
<para><anchor id="COPYBOOTDATADISK"/>Q: How do i copy boot+data
        disk images to physical floppy disks ?</para>
</question>
<answer>
<para>A: The images are in /root/images/mindi (even if they are
created by Mondo) and also in the 'images' directory on the first
CD of your backup set, if you have backed up to CD. You can copy
the images to disk as follows:-</para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>
        Put an empty Boot floppy
        bash# fdformat /dev/fd0u1722
        bash# dd if=/root/images/mindi/mindi-boot.1722.img of=/dev/fd0u1722
        Put an empty Data floppy
        bash# fdformat /dev/fd0
        bash# dd if=/root/images/mindi/mindi-data-N.img of=/dev/fd0
        Replace N with 1, 2, etc.

</entry>
</row>
</tbody></tgroup></informaltable>
</answer>
</qandaentry>

<qandaentry>
<question><para id="TAPENICE">Q: My tape drive
doesn't play nicely with Mondo at boot-time. What do I do?</para></question>
<answer><para>A: Play with 'mt'. Use its setblksize and
defblksize switches to reconfigure your tape drive if necessary.
Some tape drives just are painful. If yours is one of
them then God help you. Mondo can handle any tape drive whose drive
and firmware can handle fopen(), fwrite(), fread() and fclose().
Mondo uses standard C libraries to talk to your tape streamer. If
your tape streamer can't handle that then you had better call a
priest. Either that or ask for a refund.
</para>
</answer>
</qandaentry>
</qandaset>
</sect1>

<sect1 id="faq-install">
<title>Installation related Questions</title>
<qandaset>
<qandaentry>
<question><para>Q: Why do I get, "newt.h not found," or
"popt.h not found," several times when I try to install
Mondo?</para></question>
<answer>
<para>A: You have not installed libnewt and/or libnewt-devel.
Please do so. Check <ulink url="linuxpackages.html">Related Linux
Packages</ulink> to see what Mondo requires and where you can get
tarballs and RPM's. Make sure you are using the right version of
newt/libnewt. Read the error messages carefully.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Newt won't compile when I try. What's
                the problem?</para></question>
<answer>
<para>A: You are probably missing popt.h, which newt needs to
compile, it can be found in the 'popt' package. Check your
distribution and see if they have popt, if not check
<ulink url="linuxpackages.html">Related Linux Packages</ulink> to
see where you can get it.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: I've just used up 6 CD-R, only to
                find that Mondo won't boot!</para></question>
<answer>
<para>A: You should have used CD-RW. ;) In the HOWTO, it gives
instructions on how to create a test CD (one, not six).</para>
</answer>
</qandaentry>
<qandaentry>
<question>
<para id="PACKREQ">Q: Lots of packages,
required by Mondo, are missing from my system. What do I do?</para>
</question>
<answer>
<para>
A: Install them. :) If you are using RPM or deb
then you'll be told which packages you need. Mondo offers a lot of
those packages on its
<ulink url="http://www.mondorescue.org/download/download.html">Download</ulink>
web page.</para>
</answer>
</qandaentry>
</qandaset>
</sect1>

<sect1 id="faq-hardware">
<title>Hardware related Questions</title>
<qandaset>
<qandaentry>
        <question><para>Q: Can Mondo handle CD-RW?</para></question>
        <answer>
<para>A: Yes. Use '-Ow &lt;speed&gt; &lt;device&gt;' to make it
work.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Does Mondo support tape
                drives?</para></question>
<answer>
<para>A: Yes. See above.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Does Mondo support my tape
                drive?</para></question>
<answer>
<para>A: If your tape drive and its firmware and the kernel-level
driver support fopen(), fread(), fwrite() and fclose() - standard C
library calls - then yes, Mondo should support it. If not, well,
you need a refund. :) Mondo plays nicely with any sane, sensible
drives. That's most of them, by the way. :) If your drive doesn't
play nicely with Mondo then you may try tinkering with setblksize
and defblksize using 'mt', or tweaking Mondo's block size by
recompiling it with make INTTAPE=4096 or INTTAPE=8192 or something.
Other than that, you need a priest or a refund.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: How do I copy the floppy images from
                the CD to floppy disks?</para></question>
<answer>
<para>A: Mount the CD-ROM, e.g. at /mnt/cdrom. Insert a blank
floppy. Type:</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

        bash# cd /mnt/cdrom/images
        bash# dd if=mindi-boot.1722.img of=/dev/fd0u1722

</entry>
</row>
</tbody></tgroup></informaltable>

<para>Insert another blank floppy and type:</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# dd if=mindi-data-1.img of=/dev/fd0u1722

</entry>
</row>
</tbody></tgroup></informaltable>

<para>Do the above for each 'mindi-data' disk image.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Sometimes, my laptop won't mount
                Mondo CD properly, or something. Umm...</para></question>
<answer>
<para>A: Please insert the CD, close the CD-ROM tray, wait a few
seconds and then press Enter to acknowledge insertion of the next
CD. Your laptop is on crack and is sucking a little too hard on the
pipe.</para>
</answer>
</qandaentry>
<qandaentry>
        <question><para>Q: Does Mondo support Hardware RAID?</para></question>
        <answer>
<para>A: Yes. You may backup and restore RAID systems. You may also
backup a non-RAID system and restore as RAID (or vice versa) by
using the mountlist editor to edit your RAID and non-RAID
partitions and their settings. Mondo will do the partitioning and
formatting for you.</para>
<para>Tested Raid controllers includes all those showind only classical devices 
        such as /dev/sdx, and SmartArray cciss controllers.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Where is my CD burner, in SCSI terms?</para></question>
<answer>
<para>A: Type:</para>
<para></para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# cdrecord -scanbus

</entry>
</row>
</tbody></tgroup></informaltable>

<para>Find your CD burner's device# (e.g. '0,0,0'). Call Mondo with
the switch '-Oc &lt;speed&gt;' -d '&lt;device&gt;'. Or, if you feel
lucky, just use '-Oc 2'; Mondo will (a) assume you want to write at
4x to a CD-R and (b) will do its best to find your CD burner.</para>
</answer>
</qandaentry>
<qandaentry>
        <question><para>Q: Can Mondo handle SCSI devices?</para></question>
        <answer>
<para>A: Mondo should be able to handle almost any hardware. So
long as your kernel and modules support it, Mindi will support it
and therefore so will Mondo.</para>
</answer>
</qandaentry>
<qandaentry>
        <question><para>Q: Why doesn't cdrecord -scanbus work ?</para></question>
        <answer>
                <para>A: If you have a 2.4.x kernel (typical example are fedora legacy kernels for redhat 7.X/8/9) and an IDE CDRW device, and the drive is not
listed when you run

<informaltable><tgroup cols="1"><tbody>
<row>
<entry>
bash# cdrecord -scanbus
</entry>
</row>
</tbody></tgroup></informaltable>

try adding the following kernel option to your boot script to enable
SCSI emulation: hdx=ide-scsi, where "hdx" should be replaced with the
appropriate drive letter of the CDRW device, e.g., "hdc".
(Answer provided by Christopher Moriarity cdm7_at_cdc.gov)
</para>
</answer>
</qandaentry>
</qandaset>
</sect1>

<sect1 id="faq-backup">
<title>Backup related Questions</title>

<qandaset>
<qandaentry>
<question><para id="MMKM">Q: Mondo says, 'Cannot
                run mindi --makemountlist' and aborts. What do I do?</para></question>
<answer>
        <para>
                A: Look at <filename>/var/log/mindi.log</filename> and see what it
says. Also, try typing 'mindi --makemountlist /tmp/mountlist.txt'
to see what Mindi says. Send the log to the &ML; if you get stuck.
</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Can Mondo burn CD as they are
                created?</para></question>
<answer>
<para>A: Yes. Use the '-Oc &lt;speed&gt;' switch. Use a negative
number for a dummy burn.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Mondo failed to burn my CD. It said
something like, "Error CDB A1 01 02 53 ..." and so on. What does
that mean?</para></question>
<answer>
<para>A: Cdrecord reported some serious errors while trying to burn
your CD. Check your CD burner, your CD-R and your kernel.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: May I backup my system with one
                partition layout and restore with another?</para></question>
<answer>
<para>A: Yes. Boot in Interactive Mode and edit the mountlist using
the snazzy new mountlist editor. Mondo can now edit your RAID
partitions for you. Just open /dev/md0 (or whatever) and select
"RAID.." to start. Or, to add a RAID device:</para>
<itemizedlist>
<listitem>
<para>Add two or more partitions, of type and mountpoint
'raid'</para>
</listitem>
<listitem>
<para>Add device '/dev/md0' and click OK</para>
</listitem>
<listitem>
<para>Follow the prompts and your own common-sense :)</para>
</listitem>
</itemizedlist>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Why does Mondo need so much free disk
                space?</para></question>
<answer>
        <para>A: Because it need space to create the archive files with afio, then 
                again space to create the ISO images that you'll be able to burn.
</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: I am trying to do something clever,
e.g. write my ISO's to an NFS mount, and I get some weird error
messages. What do I do?</para></question>
<answer>
<para>A: Well, (a) use '-T /tmp' or '-T /home' or something in your
        call to Mondo. Oh, and (b) check the <filename>/etc/exports</filename> file on your NFS server
        and verify the exported filesystem is writable for the client, and relaunch exportfs -a.
</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Can Mondo backup to data files on
                another partition, e.g. an NFS mount?</para></question>
<answer>
<para>A: Yes. Just backup as usual but add '-d /mnt/nfs' or
wherever your partition is mounted; don't use '-Oc' or '-Ot' at
all; just '-Oi -d /root'. Then, after booting from the floppies
which Mondo generates, you need to type 'ISO' at the
console.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Can Mondo backup _to_ an NFS
                partition, i.e. backup over a network? How about restoring?</para></question>
<answer>
<para>A: Yes. Use '-On &lt;mount&gt; &lt;directory&gt;'. Example:
</para>
<informaltable><tgroup cols="1"><tbody>
<row>
<entry>

bash# mondoarchive -On 192.168.1.3:/home/nfs

</entry>
</row>
</tbody></tgroup></informaltable>

</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Does Mondo handle System or Hidden
                attributes when archiving Dos/Win files?</para></question>
<answer>
<para>A: No. It probably never will, either. Sorry.</para>
</answer>
</qandaentry>
</qandaset>
</sect1>

<sect1 id="faq-compare">
<title>Compare related Questions</title>

<qandaset>
<qandaentry>
<question><para>Q: When I compare my archives to my file
system, Mondo tells me there are differences or errors. Are the
archives bad?</para></question>
<answer>
        <para>A: Look at <filename>/tmp/changed.files</filename>; if the files are logfiles,
temp files or files which you think you may have changed recently
then the archives are simply out of date, albeit only by a few
minutes. Not a problem. However, if lots of files in /usr have
changed or if you get lots of errors then perhaps your CD, your
tapes or even your hardware could be to blame. Check your CD writer
or tape streamer.</para>
<para>Also, don't forget to review <filename>/var/log/mondo-archive.log</filename> for
more information.</para>
</answer>
</qandaentry>
</qandaset>
</sect1>

<sect1 id="faq-restore">
<title>Restore related Questions</title>
<qandaset>
<qandaentry>
<question><para>Q: Can Mondo help me
                move/resize/re-allocate my partitions?</para></question>
<answer>
<para>A: Yes. Just backup your system in Interactive Mode using
Mondo. Edit the mountlist when prompted.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: My zip drive is a SCSI drive. When I
restore, Mondo craps out, saying it can't mount the drive (because
there is no disk in it). What do I do?</para></question>
<answer>
<para>A: Restore in Interactive Mode. Delete the SCSI drive from
the mountlist before you restore. Then Mondo won't try to partition
or format it. Next time you backup, use -E /dev/sdd (or whatever
your zip drive is). The /dev entry will be excluded from the
mountlist but not from the filelist. So, when you restore, you
won't accidentally reformat your zip disk. However, after
restoring, you will find that /dev/sdd (the _file_) will still be
present in your /dev directory. Cool, eh?</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: I received a message like, 'Fileset
                NNN failed' during restore. What does it mean.</para></question>
<answer>
<para>A: It usually means either you had a very large (&gt;2GB)
file which was not archived owing to a flaw in your distro or your
filesystem has changed in relation to the backup.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para>Q: Why does my ext3 partition have less
                space free than when I backed it up?</para></question>
<answer>
<para>A: Mondo creates a 10MB journal file area. Your journal was
probably smaller than that, hence the difference.</para>
</answer>
</qandaentry>
<qandaentry>
<question><para id="SEGF">Q: When I restore after
booting from the CD/floppies, I sometimes get errors like, "Running
out of memory" or "Segmentation fault". What is going on?</para></question>
<answer><para>A: It sounds as if you are running out of disk
space, probably ram disk space. Type 'df -m' to see which
partitions are running low on space. Please send as much
information as you can to the &ML;. This problem is
believed to have been fixed in 1.63 and 1.71.</para>
</answer>
</qandaentry>
<qandaentry>
<question>
<para id="LVM"/>Q: I can't nuke-restore my LVM or RAID or
LVM-on-RAID setup. I have to do it manually. What now?</para></question>
<answer>
<para>A: You said it yourself. You have to do it manually. :) Sorry
but that's about it. At least you have all the tools to do it. I
assume you know how. If you don't, look at i-want-my-lvm (a script
on the ramdisk) if you're using LVM. It should give you a few
clues. RAID is harder but in general Mondo's RAID support is good.
After you've prepped and formatted your drives, run mondorestore
again but say 'no' when asked if you want Mondo to prep or format
your drives.</para>
</answer>
</qandaentry>
</qandaset>
</sect1>
</chapter>

&gfdl;

</book>