source: MondoRescue/branches/stable/mindi/distributions/conf/mindi.conf.dist@ 1600

# Mindi configuration file
#
# $Id$
#
# We tried to give sensible defaults in this file.
# It will alwys be loaded by mindi before your own configuration files. 
# DO NOT CHANGE THAT FILE IN ANYWAY AS ITS MD5 SUM IS USED AS A CHECK !!
# Anyway changing some values in your own configuration file may render 
# mindi instable or cause failures. Use with care.

#
# Maximum number of disks made by mindi
#
mindi_max_disks=99
#
# Extra space for Ram disk
#
mindi_extra_space=24576

#
# Size of the boot image
#
mindi_boot_size=16384

#
# Maximum compressed size for disk image in KB. 
#
mindi_max_compressed_size=1300

#
# deplist file name (stored in $MINDI_CONF)
#
mindi_deplist_file="deplist.txt"

#
# Write mindi CD (yes|no) ?
#
mindi_write_cd="no"

#
# Write mindi USB (yes|no) ?
#
mindi_write_usb="no"

#
# Write mindi Tape (yes|no) ?
#
mindi_write_tape="no"

#
# If set to "no", you will be prompted for whether or not
# you want to use your own kernel, or the supplied default.
# If "yes" mindi will automatically use your own kernel.
#
mindi_use_own_kernel="yes"

#
# Images creation dir
# WARNING: This directory is erased before usage
# This is also the directory mondoarchive will use to find 
# what it needs to create it rescue media
#
mindi_cache_dir="/var/cache/mindi"

#
# Temporary directory
# Under it a temporary directory will be created to host all
# temporary files for mindi. That subdirectory is erased at the end of mindi
#
mindi_tmp_dir="/tmp"

#
# USB Disk Device
#
mindi_usb_device="/dev/sda1"

#
# Tape Device
#
mindi_tape_device="/dev/st0"

#
# Additional Boot Parameters
# You may want to add acpi=off if you're unable to reboot on mindi's CD
# You may want to add ramdisk_blocksize=1024 if on Fedora Core 5/6, opensuse 10.2 ...
#
mindi_boot_params="devfs=nomount exec-shield=0 noresume selinux=0 barrier=off"

#  
# Kernel to use (NATIVE|FAILSAFE|PATH TO THE KERNEL)
#
mindi_kernel="NATIVE"
#mindi_kernel="/boot/vmlinuz.special"

#
# Modules supported by mindi and required at boot time 
#
mindi_scsi_mods="3w-xxxx 3w_xxxx 3w-9xxx 3w_9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi isp megaraid megaraid_mm megaraid_mbox megaraid_sas mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2xxx qla2xxx_conf qlogicfas qlogicfc qlogicisp raw1394 scsi_debug scsi_mod scsi_transport_sas scsi_transport_spi sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs"
mindi_ide_mods="ide ide-generic ide-detect ide-mod ide-disk ide-cd ide_cd ide-cs ide-core ide_core edd paride ata_generic ata_piix libata via82cxxx generic nvidia ahci sata_nv cmd64x pata_amd pata_marvell"
mindi_usb_mods="usb-storage usb-ohci usb-uhci usbcore usb_storage input hid uhci_hcd ehci_hcd uhci-hcd ehci-hcd ohci-hcd ohci_hcd usbkbd usbhid keybdev mousedev"
mindi_pcmcia_mods="pcmcia_core ds yenta_socket"
mindi_cdrom_mods="cdrom isocd isofs inflate_fs nls_iso8859-1 nls_cp437 sg sr_mod zlib_inflate"
mindi_tape_mods="ht st osst ide-tape ide_tape"
mindi_net_mods="sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 bnx2 e1000 eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmnet"
mindi_extra_mods="vfat fat loop md-mod linear raid0 raid1 xor raid5 raid456 lvm-mod dm-mod dm-snapshot dm-zero dm-mirror jfs xfs xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache"
#
# Modules that should NOT be part of the mini distribution 
# created for recovery time
#
mindi_deny_mods=""
# Replace with that line for HP OCMP e.g.
#mindi_deny_mods="MPS_Driver_Mapper mps octtldrv tscttl streams"
#
# Modules that SHOULD be part of the mini distribution 
# created for recovery time
#
mindi_force_mods=""
# Replace with that line for a hardware migration
#mindi_force_mods="mptsas"
#  
# Additional modules to support 
# (white space separated list of modules)
#
mindi_additional_mods=""

#
# Location of the fstab file
#
mindi_etc_fstab="/etc/fstab"

#
# Location of the logfile
#
mindi_log_file="/var/log/mindi.log"

#
# Interactive mode (yes|no)
#
mindi_interactive="no"

#
# Boot message shown during media boot
#
mindi_boot_msg="\
To format and restore all files automatically, type 'nuke' <enter>.\n\
To restore some/all files interactively, type 'interactive' <enter>.\n\
To compare the archives with your filesystem, type 'compare' <enter>.\n\
To boot to a command-line prompt (expert mode), type 'expert' <enter>.\n\
You may add one or more of the following parameters as well:-\n\n\
        donteject - mondorestore will not eject the CD; this is useful if, for\n\
                    instance, your PC's case has a concealed CD-ROM drive\n\
        noresize  - your mountlist will not be adjusted to use your unallocated\n\
                    hard disk space\n\
        textonly  - do not call any Newt library routines; this is unattractive\n\
                    but valuable if you find your Newt library has bugs in it\n\n\
e.g. Type 'nuke donteject textonly' if you have an unstable Newt library and \n\
a PC whose CD-ROM drive tray would be damaged if it unexpectedly ejected.\n\
"

#
# Options common between mindi and mondo are stored below
#

#
# ISO image CLI command to use 
# For mindi options are fixed and based on mkisofs options
# Potentially overwritten by monoarchive values
#
mr_iso_creation_cmd="/usr/bin/mkisofs"

#
# ISO image common creation options (for mkisofs/gencdromimage/...)
# do not specify the -o, -c or the -b options, nor the directory to backup
# as they will be generated by mondoarchive
# _CD#_ is a mondo macro that will be replaced by the CD number
#
mr_iso_creation_opt="-J -r -v -p MondoRescue -publisher http://www.mondorescue.org -A MondoRescue -o _ISO_ -V _CD#_ -boot-info-table -no-emul-boot -boot-load-size 4"
# For ia64
#mr_iso_creation_opt="-J -r -v -p MondoRescue -publisher http://www.mondorescue.org -A MondoRescue -V _CD#_ -no-emul-boot"
# other example:
#mr_iso_creation_options="-use-the-force-luke -no-emul-boot -boot-load-size 4 -v -J -r -p MondoRescue -publisher www.mondorescue.org -A MondoRescue -V _CD#_"