source: branches/3.3/mindi/mindi @ 3661

Last change on this file since 3661 was 3661, checked in by bruno, 20 months ago

Adds preliminary DRBD support

  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 127.3 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3661 2017-05-03 09:27:12Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38MRCFG=mondorestore.cfg
39
40# Temporary directory for mindi
41TMPDIR=${TMPDIR:=/tmp}
42if [ ! -d $TMPDIR ]; then
43    mkdir -p $TMPDIR
44fi
45
46EXTRA_SPACE=150000      # increase if you run out of ramdisk space
47
48PROMPT_MAKE_CD_IMAGE="yes"
49    # Ask if you want to make a CD Image to be written?
50    # if this is set to 'no' in the conf file, then the image will be created automatically
51
52PROMPT_MAKE_USB_IMAGE="yes"
53    # Ask if you want to make a USB Image to be written?
54    # if this is set to 'no' in the conf file, then the image will be created automatically
55
56USE_OWN_KERNEL="yes"
57    # If set to "no", you will be prompted for whether or not
58    # you want to use your own kernel, or the supplied default.
59    # If "yes" mindi will automatically use your own kernel.
60
61KERNEL_IS_XEN="no"
62    # If set to "no", the kernel is not a Xen kernel
63    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
64xenkernelpath=""
65 
66MY_FSTAB=/etc/fstab
67TAPE_MODS="ht st osst ide-tape ide_tape"
68SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa hpdsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
69
70# ide-probe-mod
71IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc raid0 raid1 raid456 drbd"
72PCMCIA_MODS="pcmcia_core ds yenta_socket"
73USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic hid_microsoft hid-microsoft uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
74NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
75CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 nls_cp437 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash dm-thin-pool multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs ntfs nls_utf8"
76# Replace with that line for HP OCMP e.g.
77#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
78DENY_MODS="kqemu vxfen"
79# Force some modules to be included
80FORCE_MODS=""
81
82LOGFILE=/var/log/mindi.log
83BOOT_MEDIA_MESSAGE="\
84To format and restore all files automatically, type '0enuke07' <enter>.\n\
85To restore some/all files interactively, type '0einteractive07' <enter>.\n\
86To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
87To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
88\n\
89You may add one or more parameters as well as per the function keys below\n\
90e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
91\n\
92If restoring from a local external disk or USB key, do not connect it \n\
93until the boot-up has finished.\n\
94\n\
95\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
96"
97FDISK=$MINDI_SBIN/mr-parted2fdisk
98
99# Using a config file allow to overwrite some values
100MINDI_CONFIG="$MINDI_CONF/mindi.conf"
101if [ -f $MINDI_CONFIG ]; then
102    . $MINDI_CONFIG
103fi
104DEPLIST_FILE="$MINDI_CONF/deplist.txt"
105DEPLIST_DIR="$MINDI_CONF/deplist.d"
106
107# Debian 8 system e.g. use xorriso for UEFI support.
108# However, they use exactly the same command line parameters as mkisofs, so just
109# use it if it's available.
110ISO_CMD="/usr/bin/xorriso"
111
112# Mandriva system e.g. use cdrkit, which uses genisoimage.
113# However, they use exactly the same command line parameters as mkisofs, so just
114# use it if it's available.
115if [ ! -x $ISO_CMD ]; then
116    ISO_CMD="/usr/bin/genisoimage"
117    # For compatibility with previous versions default to mkisofs
118    if [ ! -x $ISO_CMD ]; then
119        ISO_CMD="/usr/bin/mkisofs"
120    fi
121    if [ ! -x $ISO_CMD ]; then
122        LogFile "NOTE: No CD image (ISO file) utility found"
123        ISO_CMD = ""
124    fi
125else
126    ISO_CMD="/usr/bin/xorriso -as mkisofs"
127fi
128
129ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi -V MindiCD -o $MINDI_CACHE/mindi.iso "
130
131# Mindi set this as default in case it's invoked alone
132BOOT_TYPE="BIOS"
133# and we also check whether we're UEFI or not.
134if [ -d "/sys/firmware/efi" ]; then
135    BOOT_TYPE="UEFI"
136else
137    # Find MBR in case of bootable USB device to build
138    MBRFILE=/usr/lib/syslinux/mbr.bin
139    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
140    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
141    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
142    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
143fi
144
145# Function to log on screen only
146LogScreen() {
147        if [ -e /dev/stderr ] ; then
148        echo -e "$1" >> /dev/stderr
149    elif [ -e /usr/bin/logger ] ; then
150        /usr/bin/logger -s $1
151    fi
152}
153
154# Function to log in log file only
155LogFile() {
156
157    echo -e "$1" >> $LOGFILE
158    if [ _"$2" != _"" ]; then
159        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
160        rm -f "$2"
161    fi
162}
163
164# Function to log in both screen and logfile
165LogAll() {
166    LogScreen "$1"
167    LogFile "$1" "$2"
168}
169
170# Last function called before exiting
171# Parameter is exit code value
172# Should be declared here as used immediately below potentialy
173MindiExit() {
174    LogFile "INFO: Mindi $MINDI_VERSION is exiting" 
175    LogFile "INFO: End date : `date`" 
176    if [ _"$MONDO_SHARE" != _"" ] ; then
177        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
178        if [ -f $LOGFILE ]; then
179            cat $LOGFILE >> /var/log/mondoarchive.log
180        else
181            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
182        fi
183        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
184    fi
185
186    cd /
187    sync&
188
189    # Clean temporary files only when standalone mindi
190    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
191        rm -Rf $MINDI_TMP
192    fi
193    exit $1
194}
195
196Die() {
197    local i
198    if [ "$1" = "" ] ; then
199        LogAll "FATAL ERROR"
200    else
201        LogAll "FATAL ERROR. $1"
202    fi
203    if [ _"$2" != _"" ]; then
204        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
205    fi
206    rm -f "$2"
207
208    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
209    LogAll "See http://www.mondorescue.org for more information."
210    LogAll "WE CANNOT HELP unless you enclose that file.\n"
211    MindiExit -1
212}
213
214# Now we can create what we need
215MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
216if [ $? -ne 0 ]; then
217    df $TMPDIR
218    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
219fi
220if [ _"$MINDI_TMP" = _"" ]; then
221    Die "MINDI_TMP is empty, aborting"
222fi
223if [ _"$MINDI_TMP" = _"/" ]; then
224    Die "MINDI_TMP is /, aborting"
225fi
226export MINDI_TMP
227
228# ----------------------------------------------------------------------------
229
230
231AbortHere() {
232    [ "$mountpoint" ] && sync && umount $mountpoint 2>> $LOGFILE
233    Die "Program is terminating in response to signal received from OS/user"
234}
235
236
237Aborted() {
238    trap SIGHUP SIGTERM SIGTRAP SIGINT
239    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
240    Die "User abort."
241}
242
243
244AddFileToCfgIfExists() {
245    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
246}
247
248
249AddKeyboardMappingFile() {
250    local mappath r included_list included_item i res ii sss
251    mappath=$1
252    KBDEPTH=$(($KBDEPTH+1))
253    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
254    if [ -e "$bigdir/$mappath" ] ; then
255        LogFile "INFO: $mappath already added"
256        return
257    elif [ -d "$bigdir/$mappath" ] ; then
258        echo "Cannot add $mappath: it's a directory. Sorry."
259        return
260    fi
261    LogFile "INFO: Added kbd map $mappath"
262    if [ ! -e "$mappath" ] ; then
263        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
264        if [ ! -e "$mappath" ] ; then
265            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
266            return
267        fi
268    fi
269
270    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
271    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
272        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
273    else
274        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
275    fi
276    for included_item in $included_list ; do
277        if [ ! -e "$included_item" ] ; then
278            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
279            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
280            for ii in $sss ; do
281                [ -e "$ii" ] && AddKeyboardMappingFile $ii
282            done
283        else
284            AddKeyboardMappingFile $included_item
285        fi
286    done
287}
288
289
290CopyDependenciesToDirectory() {
291    local outdir incoming counter d found tdir templog
292    outdir=$1
293    templog=$MINDI_TMP/$$.log
294    mkdir -p $outdir
295    incoming=`ReadLine`
296    counter=$3
297    > $templog
298
299    while [ "$incoming" != "" ] ; do
300        if [ "$3" = "1" ]; then
301            counter=$(($counter+1))
302            LogProgress $counter $2
303        fi
304        # Non absolute file names should not arrive till here => skipped
305        if [ `echo "$incoming" | cut -c1` != '/' ]; then
306            LogAll "WARNING: Unable to handle $incoming"
307            incoming=`ReadLine`
308            continue
309        fi
310        # no parent directory of incoming should be a link, copy is not possible in that case
311        d=`dirname "$incoming"`
312        found="false"
313        while [ $d != "/" -a $found = "false" ]; do
314            [ -h "$d" ] && found="true"
315            d=`dirname "$d"`
316        done
317        if [ -d "$incoming" -a ! -h "$incoming" ]; then
318            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0 0
319        elif [ -e "$incoming" ] && [ $found = "false" ]; then
320            if [ ! -h "$incoming" ]; then
321                tar cf - -C / $incoming 2> $templog | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
322            else
323                tdir=`dirname "$incoming"`
324                if [ ! -e "$outdir/$tdir" ]; then
325                    mkdir -p "$outdir/$tdir"
326                fi
327                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
328            fi
329            # Only uncompress modules if not using udevd
330            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
331                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
332            fi
333            [ -x "$outdir" ] && StripExecutable $outdir
334        fi
335        incoming=`ReadLine`
336    done
337}
338
339
340CountItemsIn() {
341    local r
342    r=0
343    for q in $1 ; do
344        r=$(($r+1))
345    done
346    echo $r
347}
348
349
350DropOptimizedLibraries() {
351    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
352    filelist=$1
353    outdir=$2
354
355    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
356    if [ "$list_of_optimized_libraries" = "" ] ; then
357        return 0
358    fi
359    echo -en "Dropping i686-optimized libraries if appropriate"
360    for optimized_lib_name in $list_of_optimized_libraries ; do
361        echo -en "."
362        reason=""
363        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
364        echo "$vanilla_lib_name" >> $filelist
365        LogFile "INFO: Adding $vanilla_lib_name to filelist"
366        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
367        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
368
369        # This may return multiple files
370        for resolved in `mr-read-all-link $vanilla_lib_name`; do
371            LogFile "INFO: Adding as deps $resolved to filelist"
372            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
373            if [ "$vanilla_resolved_name" != "$resolved" ]; then
374                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
375                rmdir $outdir$resolved > /dev/null 2> /dev/null
376                ln -sf $vanilla_resolved_name $outdir$resolved
377                LogFile "INFO: Excluding deps $resolved" 
378                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
379                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
380                echo "$vanilla_resolved_name" >> $filelist.tmp
381                mv -f $filelist.tmp $filelist
382            fi
383        done
384    done
385    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
386    mv -f $filelist.tmp $filelist
387    echo -e "$DONE"
388}
389
390
391FindAndAddUserKeyboardMappingFile() {
392    local r res mapfile mappath included_item included_list keyfile mp locale
393    LogAll "INFO: Analyzing your keyboard's configuration."
394    KEYDIR=/usr/lib/kbd
395    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
396    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
397    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
398    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
399    if [ ! -e "$KEYDIR" ] ; then
400        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
401        return 0
402    else
403        LogFile "INFO: KEYDIR=$KEYDIR"
404    fi
405    if [ -e "/etc/sysconfig/keyboard" ] ; then
406        LogFile "INFO: Red Hat-style config detected."
407        keyfile=/etc/sysconfig/keyboard
408    elif [ -e "/etc/vconsole.conf" ] ; then
409        LogFile "INFO: New Fedora style config detected."
410        keyfile=/etc/vconsole.conf
411    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
412        LogFile "INFO: Slackware-style config detected."
413        keyfile=/etc/rc.d/rc.keymap
414    elif [ -e "/etc/rc.config" ] ; then
415        LogFile "INFO: Debian-style config detected."
416        keyfile=/etc/rc.config
417    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
418        LogFile "INFO: Debian-style config detected."
419        mkdir -p $bigdir/tmp
420        echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
421        KBDEPTH=0
422        mkdir -p $bigdir/etc/console
423        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
424        echo ""
425        echo -e "$DONE"
426        return 0
427    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
428        LogFile "INFO: Ubuntu-style config detected."
429        mkdir -p $bigdir/tmp
430        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
431            kbdfile="/etc/console-setup/boottime.kmap.gz"
432        else
433            kbdfile="/etc/console-setup/cached.kmap.gz"
434        fi
435        echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
436        KBDEPTH=0
437        mkdir -p $bigdir/etc/console-setup
438        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
439        echo ""
440        echo -e "$DONE"
441        return 0
442    elif [ -e "/etc/default/keyboard" ]; then
443        LogFile "INFO: New Debian-style config detected."
444        keyfile=/etc/default/keyboard
445    elif [ -e "/etc/rc.conf" ] ; then
446        LogFile "INFO: ArchLinux config detected."
447        keyfile=/etc/rc.conf
448    elif [ -e "/etc/conf.d/keymaps" ] ; then
449        LogFile "INFO: Gentoo-style config detected."
450        keyfile=/etc/conf.d/keymaps
451    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
452        LogFile "INFO: X11-style config detected."
453        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
454    else
455        LogFile "Searching for rc.config ..."
456        keyfile=`find /etc -name rc.config | head -n1`
457        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
458            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
459            return
460        else
461            LogFile "INFO: Found $keyfile"
462        fi
463    fi
464    if [ ! -e "$KEYDIR/keymaps" ] ; then
465        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
466        return
467    fi
468    LogFile "INFO: keyfile=$keyfile"
469    # For SLES we need to remove the .map.gz extension Cf #614
470    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
471    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
472    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`             # Gentoo, ArchLinux & New fedora
473    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
474    [ ! "$locale" ] && locale=`grep -Ei 'XkbLayout' "$keyfile" | grep -v '^#' | cut -d= -f2 | tr -d '"'`            # New Debian 8+
475    LogFile "INFO: locale=$locale"
476    #
477    # Process the keymaps dir once for all
478    # AddKeyboardMappingFile will use it recursively
479    #
480    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
481    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
482    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
483    # For new distro such as RHEL 7 we need that additional search
484    [ ! "$mp" ] && mp=`grep "xkb" $MINDI_TMP/keymaps.find | grep -E "/$locale\." | grep -vx " *#.*"`
485    # If we have multiple keymaps then log it !!
486    echo "$mp" | grep -q " " >> $LOGFILE
487    if [ $? -eq 0 ]; then
488        LogAll "WARNING: Multiple keymaps found: $mp"
489        LogFile "INFO: The following one will be used"
490    fi
491    for i in $mp ; do
492        mappath=$i
493        [ -e "$i" ] && [ ! -d "$i" ] && break
494    done
495    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
496        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
497    fi
498    LogFile "INFO: mappath = $mappath"
499    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
500        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
501        return
502    fi
503    echo -en "INFO: Adding keyboard mapping tables"
504    mkdir -p $bigdir/tmp
505    echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
506    KBDEPTH=0
507    AddKeyboardMappingFile $mappath
508    echo -e "$DONE"
509    rm -f $MINDI_TMP/keymaps.find
510    return 0
511}
512
513
514FindLdlinux32Binary() {
515    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
516    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
517    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
518    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
519    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
520    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
521    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
522    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
523    if [ ! -e "$LDLINUXC32" ]; then 
524        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
525        LDLINUXC32=/tmp/idoesnthopefullyexist
526    else
527        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
528    fi
529}
530
531
532FindMboot32Binary() {
533    MBOOTC32=/usr/lib/syslinux/mboot.c32
534    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
535    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
536    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
537    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
538    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
539    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
540    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
541    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
542    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
543}
544
545FindLdlinuxe64Binary() {
546    LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
547    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
548    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
549    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
550    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
551    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
552    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 | grep -x "/.*/ldlinux.e64"`
553    [ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
554    LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
555}
556
557FindSyslinux64EFI() {
558    SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
559    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
560    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
561    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
562    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
563    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
564    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi | grep -x "/.*64/syslinux.efi"`
565    [ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
566    LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
567}
568
569FindIsolinuxBinary() {
570    ISOLINUX=/usr/lib/isolinux.bin
571    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
572    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
573    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
574    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
575    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
576    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
577    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
578    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
579    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
580}
581
582
583GenerateGiantDependencyList() {
584    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item tempdepfile modres noof_lines lvmversion lvmresolved
585
586    echo -en "INFO: Analyzing dependency requirements"
587    outfile=$1
588    tempfile=$MINDI_TMP/$$.txt
589    incoming=`ReadLine`
590
591    > $tempfile
592    progress=0
593    res=0
594    noof_lines=$2
595    while [ "$incoming" != "" ] ; do
596        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
597            incoming=`ReadLine`
598            continue
599        fi
600        if [ "$incoming" = "LVMFILES:" ] ; then
601            break
602        fi
603        filelist=`GenerateListForFile "$incoming"`
604        r=$?
605        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
606        res=$(($res+$r))
607#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
608        for fname in $filelist ; do
609            [ "$fname" != "" ] && echo "$fname" >> $tempfile
610        done
611        progress=$(($progress+1))
612        LogProgress $progress $noof_lines
613        incoming=`ReadLine`
614    done
615    if  [ "$incoming" = "LVMFILES:" ] ; then
616        incoming=`ReadLine`
617        lvmversion=""
618        while [ "$incoming" != "" ] ; do
619            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
620                incoming=`ReadLine`
621                continue
622            fi
623            filelist=`GenerateListForFile "$incoming"`
624            for tool in $filelist ; do
625                lvmresolved=`readlink -f $tool`
626                if [ "$tool" = "$lvmresolved" ]; then
627                    echo "$tool" >> $tempfile
628                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
629                    if [ "$lvmversion" = "" ] ; then
630                        lvmversion=`$lvmresolved`
631                        echo "$lvmresolved" >> $tempfile
632                    fi
633                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
634                    if [ "$lvmversion" = "200" ]; then
635                        # pvdata and lvmcreate_initrd don't exist in LVM2
636                        case "$toolstripped" in
637                        "pvdata")
638                            continue
639                            ;;
640                        "lvmcreate_initrd")
641                            continue
642                            ;;
643                        esac
644                    fi
645                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
646                    if [ -e "$toolpath" ] ; then
647                        echo "$toolpath" >> $tempfile
648                        echo "$tool" >> $tempfile
649                    else
650                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
651                    fi
652                    if [ -e "$toolpath" ] ; then
653                        echo "$toolpath" >> $tempfile
654                        echo "$tool" >> $tempfile
655                    else
656                        echo "Where are your LVM-Tools? Couldn't find $tool"
657                    fi
658                else
659                    echo "$tool" >> $tempfile
660                fi
661            done
662            progress=$(($progress+1))
663            LogProgress $progress $noof_lines
664            incoming=`ReadLine`
665        done
666    fi
667    echo -e "$DONE"
668
669    echo -en "INFO: Making complete dependency list..."
670    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
671    mv -f $tempfile.new $tempfile
672    > $outfile.pre
673    progress=0
674    noof_lines=`cat $tempfile | wc -l`
675    LogFile "---------------------------------"
676    LogFile "List of dependencies:             "
677    LogFile "---------------------------------"
678    for fname in `cat $tempfile` ; do
679        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
680        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
681        progress=$(($progress+1))
682        LogProgress $progress $noof_lines
683    done
684    if [ _"$MONDO_SHARE" != _"" ]; then
685        mkdir -p $bigdir/tmp
686        mkdir -p $bigdir/usr/bin
687        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
688            LogAll "\nINFO: Incorporating post-nuke tarball"
689            (cd "$bigdir" ; tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log)
690        fi
691        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
692            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
693        else
694            LogAll "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
695            LogAll "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
696            LogAll "       If Mindi was called by Mondo then send a bug report."
697            LogAll "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
698            LogAll "       Finally, run Mindi again."
699            Die "Odd."
700        fi
701        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogAll "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
702        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
703            LogAll "\nINFO: Incorporating Network-related settings"
704            for r in NETFS-* ; do
705                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
706                LogFile "INFO: Copying $r to ramdisk"
707            done
708        fi
709    fi
710    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
711    rm -f $tempfile $outfile.pre
712    [ "$res" -eq "0" ] && echo -e "$DONE" || echo "\nFailed."
713    return $res
714}
715
716
717GenerateListForFile() {
718    local files_found loc fname incoming i res
719    incoming="$1"
720    files_found=""
721    res=0
722
723    for fname in $incoming ; do
724        files_found="$files_found `LocateFile $fname`"
725    done
726
727    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
728}
729
730
731# Returns all disk devices which are part of a raid array
732GetAllRaidMembers() {
733    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
734}
735
736
737GetFileSizeList() {
738    local i
739    for i in `find $1 -type d -o -print` ; do
740        du -sk $i
741    done
742}
743
744
745# Check kernel filesystem capabilites for accessing initrd image
746# Could be ext2 FS (old mode) or initramfs (new mode)
747#
748# Interface definition:
749# param #1: absolute path to kernel image
750GetInitrdFilesystemToUse() {
751
752    # interface test: make sure we have one parameter
753    if [ $# -ne 1 ]; then
754        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
755    fi
756
757    # interface parameters
758    local lvKernelImage=$1
759
760    # local constants (filesystem magic strings)
761    local lcMagicCramfs="<3>cramfs: wrong magic"
762    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
763    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
764    local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|[<]*6[>]*Trying to unpack rootfs image as initramfs"
765
766    # local variables
767    local lvOffset
768    local lvScanRes
769    local lvUseFilesystem
770
771    # say where we are.
772    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
773
774    # verify that file exists
775    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
776
777    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
778    file $lvKernelImage 2>&1 | grep -q gzip
779    if [ $? -eq 0 ]; then
780        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
781        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
782    else
783        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
784        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
785        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
786        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
787        if [ $lvOffset -eq 0 ]; then
788            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
789            lvScanRes=$lcMagicInitfs
790        else
791            lvOffset=`expr $lvOffset / 2`
792            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
793            # scan again  kernel image
794            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
795        fi
796    fi
797
798    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
799    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
800        lvUseFilesystem="ext2fs"
801    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
802        lvUseFilesystem="ext3fs"
803    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
804        lvUseFilesystem="initramfs"
805    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
806        lvUseFilesystem="cramfs"
807    else
808        # In that case, we are most probably after 2.6.30 and use the supported initramfs
809        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
810        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
811        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
812        lvUseFilesystem="initramfs"
813    fi
814
815    # say what we are using
816    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
817
818    # return file system to use
819    echo "$lvUseFilesystem"
820
821}
822
823# Searches members of raid device
824# $1: raid device (/dev/md...)
825GetRaidDevMembers() {
826    if [ ! -f /etc/raidtab ]; then 
827        return
828    fi
829    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
830}
831
832
833ListAllPartitions() {
834    local res currline partition all_partitions ap_orig remaining i j
835
836    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
837    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
838    if [ -e "/vmfs/volumes" ]; then
839        # For VMWare ESX 3 get the device names of these volumes
840        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
841    fi
842    return
843}
844
845
846ListKernelModulePaths() {
847    local module_list module fname r kern
848    module_list="$MODULES"
849    # Remove unwanted modules from list
850    for i in $DENY_MODS; do
851        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
852    done
853###
854### Sq-Modification ... Use kernelname for module search path if specified
855###
856    if [ "${kernelname}" != "" ]
857    then
858        kern=${kernelname}
859    else
860        kern="$KERVERRUN"
861    fi
862    export KERVER=$kern
863###
864### Sq-Mod End
865###
866    # Get rid of duplicates
867    for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do
868        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
869        if [ -z "$r" ]; then
870            if [ "`echo "$MODULES" | grep -w $module`" ]; then
871                r="[live module file not found]"
872            else
873                r="[extra module file not found]"
874            fi
875        else
876            [ -f "$r" ] && echo "$r"
877        fi
878        LogFile "INFO: module $module --> $r"
879    done
880    find /lib/modules/$kern/modules.* -type f 2> /dev/null
881}
882
883#
884# Critical function which computes all dependencies (dyn. lib.)
885# for a list of binaries
886#
887LocateDeps() {
888    local incoming fname deps
889    incoming="$*"
890    deps=""
891
892    for fname in $incoming ; do
893        if [ ! -e "$fname" ] ; then
894            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
895            if echo $fname | grep lvm &> /dev/null ; then
896                LogFile "          This warning only affects you if you are using LVM."
897                if echo "$MODULES" | grep lvm &> /dev/null ; then
898                    LogFile "          I think you are, so please take heed!"
899                else
900                    LogFile "          I don't think you are, so don't worry about it."
901                fi
902            fi
903        else
904            deps="$deps $fname" 
905        fi
906    done
907    mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
908}
909
910
911LocateFile() {
912    local i j path fname_to_find location output resolved tmp stub cache_id loclist
913    fname_to_find="$1"
914    # It's an absolute path
915    j=`echo "$fname_to_find" | cut -c1`
916    if [ _"$j" = _"/" ]; then
917        dn=`dirname $fname_to_find`
918        # We suppose that the link is already included, just add the new file
919        if [ -h "$dn" ]; then
920            newdn=`readlink -f $dn`
921            bn=`basename $fname_to_find`
922            output="$newdn/$bn"
923        else
924            output="$fname_to_find"
925        fi
926        if [ -h "$output" ] ; then
927            output="`mr-read-all-link $output` $output"
928        fi
929        echo "$output"
930        return 0
931    fi
932    # It's not an absolute path
933    output=""
934    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
935    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
936        [ -h "$path" ] && continue
937        [ ! -e "$path/$fname_to_find" ] && continue
938        output="$path/$fname_to_find $output"
939        if [ -h "$path/$fname_to_find" ] ; then
940            output="`mr-read-all-link $path/$fname_to_find` $output"
941        fi
942    done
943    if [ "$output" = "" ] ; then
944        return 1
945    fi
946    echo "$output"
947    return 0
948}
949
950LogProgress() {
951    local i progress modres noof_lines title
952 
953    progress=$1
954    noof_lines=$2
955    title=$3
956
957    i=$(($progress*100))
958    if [ $noof_lines -ne 0 ]; then
959        i=$(($i/$noof_lines))
960    else
961        i=0
962    fi
963
964    if [ _"$MONDO_SHARE" != _"" ]; then 
965        echo "$title        $i%"
966    else
967        echo -en "\r\t\t\t\t\t\t\t\t"
968        echo -en "$i"
969        echo -en "%"
970        modres=$(($progress%4))
971        [ "$modres" -eq "0" ] && echo -en "\t/"
972        [ "$modres" -eq "1" ] && echo -en "\t-"
973        [ "$modres" -eq "2" ] && echo -en "\t\\"
974        [ "$modres" -eq "3" ] && echo -en "\t|"
975    fi
976}
977
978# Called by MakeBootInitFile, to make /tmp/$MRCFG
979MakeMondoConfigFile() {
980    local outfile use_lzo use_comp use_star
981    outfile=$1
982    > $outfile
983    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
984    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
985    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
986    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
987    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
988    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
989    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
990    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
991    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
992    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
993    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
994    echo "use-lzo $use_lzo" >> $outfile
995    echo "use-gzip $use_gzip" >> $outfile
996    echo "use-star $use_star" >> $outfile
997    echo "use-lzma $use_lzma" >> $outfile
998    echo "use-comp $use_comp" >> $outfile
999    echo "boot-type $BOOT_TYPE" >> $outfile
1000    echo "datestamp `date`" >> $outfile
1001    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
1002    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1003    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1004    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1005    AddFileToCfgIfExists $MINDI_TMP/ISO-DIR           iso-dir           $outfile
1006    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1007    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1008    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver    $outfile
1009    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1010    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1011    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1012    AddFileToCfgIfExists $MINDI_TMP/ACL               acl               $outfile
1013    AddFileToCfgIfExists $MINDI_TMP/XATTR             xattr             $outfile
1014    AddFileToCfgIfExists $MINDI_TMP/OBDR              obdr              $outfile
1015
1016    # Deal with network configuration in a portable way
1017    if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
1018        mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
1019    fi
1020}
1021
1022# Get PV's for an LV
1023GetPVsForLV() {
1024    if [ -n "$1" ]; then
1025        vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1026        if [ -z "$vg" ]; then
1027            return
1028        fi
1029        $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1030    fi
1031}
1032
1033
1034MakeMountlist() {
1035    local mountlist all_partitions current_partition \
1036partition_size partition_format outstring partition_number \
1037partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1038absolute_partition old_partition_fmt current_lvolume uname skip
1039
1040    LogFile "------------------------------------"
1041    LogFile "INFO: Your raw fstab file looks like this:"
1042    LogFile "------------------------------------"
1043    cat $MY_FSTAB >> $LOGFILE
1044    LogAll "-----------------------------------"
1045    LogAll "INFO: Your mountlist will look like this:"
1046    LogAll "-----------------------------------"
1047
1048# mountlist(OUT)
1049    mountlist=$1
1050
1051# NB: partition = device
1052# NB: mountpt = where the device is mounted
1053
1054    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1055
1056    [ "$mountlist" != "" ] && [ "$mountlist" != "/" ] && rm -Rf $mountlist
1057    > $mountlist
1058    all_partitions=""
1059   
1060    if [ $LVM != "false" ]; then
1061        LogFile "INFO: Analyzing LVM..."
1062        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1063        if [ $? -ne 0 ]; then
1064            LVM="false"
1065        fi
1066        # Excluded LVs and GVs are not reported here
1067        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1068    fi
1069    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1070    for i in $IMAGE_DEVS ; do
1071        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1072    done
1073    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1074    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1075    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1076    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1077    for c_p in $all_partitions ; do
1078        # Skip fd/cd devices, network FS, cifs
1079        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1080        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1081        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1082            current_partition=`readlink -f $c_p`
1083            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1084                current_partition="$c_p"
1085            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1086                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1087                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1088            fi
1089            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1090        else
1091            current_partition="$c_p"
1092        fi
1093        [ "$c_p" = "none" ] && continue
1094        redhat_label=""
1095        label=""
1096        uuid=""
1097        absolute_partition=`readlink -f $c_p`
1098        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1099
1100        # set default in case we dont't find it
1101        str_to_find_fmt_with=$current_partition
1102
1103        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1104        # current_partition contains only first column of /etc/fstab
1105        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1106            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1107            actual_dev=""
1108
1109            # 1st try, findfs - the RHEL way of finding labels and their partitions
1110            if [ -x "/sbin/findfs" ]; then
1111                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1112            fi
1113   
1114            # 2nd try : blkid, the good way for all LABEL except swap
1115            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1116                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1117                # For LVM FS it will give a /dev/dm-# which should then be converted
1118                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1119                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1120                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1121                    for dev in `ls /dev/mapper/*`; do
1122                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1123                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1124                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1125                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1126                            break
1127                        fi
1128                    done
1129                fi
1130            fi
1131   
1132            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1133            # For LVM gives a /dev/mapper entry
1134            if [ "x$actual_dev" = "x" ]; then
1135                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1136            fi
1137   
1138            # 4th try, with vol_id
1139            # SWAP only
1140            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1141                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1142                for dev_swap in $list_swaps ; do
1143                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1144                    if [ "x$dev_exists" != "x" ]; then
1145                        actual_dev=$dev_swap
1146                        break;
1147                    fi
1148                done
1149            fi
1150
1151            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1152            # LABEL=SW-cciss/c0d0p3 (RDP)
1153            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1154            # SWAP only
1155            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1156                    skip=""
1157                    uname=$KERVERRUN
1158                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1159                    # 2.6.12 needs 16 (FC3)
1160                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1161                    # 2.6.19 and upper needs 1052
1162                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1163                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1164                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1165                    if [ $skip = "" ]; then
1166                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1167                    fi
1168                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1169                    do
1170                        # Location of the swap label for kernel 2.6
1171                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1172                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1173                            actual_dev=$try_dev
1174                        fi
1175                    done
1176            fi
1177
1178            # Check if one of all those tries has known success
1179            if [ "x$actual_dev" != "x" ]; then
1180                current_partition=$actual_dev
1181            else
1182                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1183            fi
1184        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1185        # current_partition contains only first column of /etc/fstab
1186        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1187            uuid=`echo "$current_partition" | cut -d'=' -f2`
1188            actual_dev=""
1189
1190            # 1st try, findfs - the RHEL way of finding labels and their partitions
1191            if [ -x "/sbin/findfs" ]; then
1192                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1193            fi
1194   
1195            # 2nd try : blkid, the good way for all UUID except swap
1196            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1197                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1198                # For LVM FS it will give a /dev/dm-# which should then be converted
1199                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1200                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1201                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1202                    for dev in `ls /dev/mapper/*`; do
1203                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1204                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1205                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1206                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1207                            break
1208                        fi
1209                    done
1210                fi
1211            fi
1212   
1213            # 3th try, with vol_id
1214            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1215                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1216                for dev in $list_dev ; do
1217                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1218                    if [ "x$dev_exists" != "x" ]; then
1219                        actual_dev=$dev
1220                        break;
1221                    fi
1222                done
1223            fi
1224
1225            # 4th try, with dumpuuid (VMWare only ?) for swap
1226            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1227                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1228                for dev in $list_dev ; do
1229                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1230                    if [ "x$dev_exists" != "x" ]; then
1231                        actual_dev=$dev
1232                        break;
1233                    fi
1234                done
1235            fi
1236
1237            # Check if one of all those tries has known success
1238            if [ "x$actual_dev" != "x" ]; then
1239                current_partition=$actual_dev
1240            else
1241                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1242            fi
1243        else
1244            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1245            # they use symlinks in fstab unrelated to what is shown in mount !
1246            if [ _"$partition_mountpt" = _"" ]; then
1247                # set default in case we dont't find it
1248                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1249                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1250                            str_to_find_fmt_with=$tmpp
1251                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1252                            break;
1253                        fi
1254                done
1255            fi
1256        fi
1257
1258        # Detects noauto partitions not mounted and exclude them
1259        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1260        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1261                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1262            continue
1263        fi
1264        # Detects bind partitions and exclude them
1265        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1266                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1267            continue
1268        fi
1269
1270        # Look for devices which have to be excluded
1271        skip=0
1272        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1273            l=""
1274            list_of_devices="`mr-read-all-link $current_partition`"
1275            for d in $list_of_devices; do
1276                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1277            done
1278
1279            # Remove PVs from LVs excluded
1280            l="$l `GetPVsForLV $current_partition`"
1281
1282            # We want a single unique list
1283            list_of_devices="`echo $l | tr ' ' '\n' | sort -u`"
1284
1285            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1286                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1287                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1288                    skip=1
1289                    continue
1290                fi
1291            done
1292        fi
1293        if [ $skip -eq 1 ]; then
1294            continue
1295        fi
1296
1297        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1298        # Detects iso9660 ISO images and exclude them
1299        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1300                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1301            continue
1302        fi
1303        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1304        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1305        # the former is then a link to the latter, so we test whether
1306        # $current_partition is actually such a link or not and set
1307        # $current_lvolume accordingly. On Debian you may find more than one answer
1308        # so we remove the one corresponding to /dev/.static
1309        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1310        # principle is the same and we need to find the link to it as well.
1311        # Note that $current_lvolume may well be an
1312        # ordinary device. It is just to make sure that we feed the right value
1313        # into any of the LVM tools if possible.
1314
1315        current_lvolume="$current_partition"
1316        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1317            # .static dir are a Debian specificity
1318            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1319            echo $current_lvolume | grep -q ' '
1320            if [ $? -eq 0 ]; then
1321                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1322            fi
1323            # if it's not found, it may well be a real device such as a multipath one
1324            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1325            if [ _"$current_lvolume" = _"" ]; then
1326                current_lvolume="$current_partition"
1327            fi
1328        fi
1329        #
1330        # End of LVM device style variation code (other than $current_lvolume).
1331
1332        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1333            # Size computed via LVM not directly
1334            partition_size="lvm"
1335        else
1336            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1337            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1338            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1339                # Skip swap files
1340                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1341                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1342                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1343                [ "$partition_format" != "swap" ] && partition_format="swap"
1344                if [ "$partition_size" = "" ] ; then
1345                    totalsize=0
1346                    items=0
1347                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1348                        totalsize=$(($totalsize+$i))
1349                        items=$(($items+1))
1350                    done
1351                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1352                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1353                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1354                fi
1355            else
1356                partition_size=`SizeOfPartition $current_partition`
1357            fi
1358        fi
1359        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1360        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1361        if [ "$partition_mountpt" = "" ] ; then
1362            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1363                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1364                    partition_mountpt="raid"
1365                    partition_format="raid"
1366                else
1367                    partition_mountpt="lvm"
1368                    partition_format="lvm"
1369                fi
1370            fi
1371        fi
1372        psz=$partition_size
1373        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1374        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1375        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1376            partition_mountpt="image"
1377            old_partition_fmt=$partition_format
1378            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1379            partition_size=$(($partition_size+1)); # just in case
1380            if [ "$partition_format" = "Linux" ] ; then
1381                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1382                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1383                partition_format=$old_partition_fmt
1384            fi
1385        fi
1386
1387        if [ ! "$partition_mountpt" ] ; then
1388            LogFile "------- $FDISK -l $qq log ------------"
1389            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1390                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1391                [ "$partition_format" ] && break
1392            done
1393            LogFile "------- $FDISK log end ------------"
1394            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1395                partition_format="compaq"
1396            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1397                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1398                continue
1399            fi
1400        fi
1401        if [ "$redhat_label" ]; then
1402            label="$redhat_label"
1403        elif [ "$uuid" ]; then
1404            label="$uuid"
1405        fi
1406
1407        # On RHEL 7 they use UUID concretely, even when not mentioned in fstab
1408        # in order to mount the root part e.g. in grub.
1409        # One way to solve this is to add the UUID now, if there wasn't one so it's
1410        # restored correctly
1411        if [ _"$label" = _"" ]; then
1412            label=`blkid $current_partition | perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
1413        fi
1414
1415        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1416        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1417        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1418        if [ "$current_partition" = "" ] ; then
1419            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1420        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1421            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1422                partition_mountpt=raid
1423                partition_format=raid
1424                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1425                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1426            else
1427                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1428            fi
1429        elif [ "$partition_format" = "" ] ; then
1430            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1431        elif [ "$partition_size" = "" ] ; then
1432            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1433        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1434            continue
1435        else
1436            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1437            LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1438                partition_format="vfat"
1439            fi
1440            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1441            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1442        fi
1443    done
1444    LogAll "-----------------------------------" 
1445}
1446
1447CheckMountlist() {
1448    local file=$1
1449    # Coherency verification
1450    ML01=`cat $file | wc -l`
1451    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1452    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1453    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1454    if [ "$ML01" -ne "$ML1" ]; then
1455        LogFile "--------------------------------------------"
1456        LogAll "WARNING: Duplicate device entry in mountlist"
1457        LogFile "--------------------------------------------"
1458    fi
1459    if [ "$ML02" -ne "$ML2" ]; then
1460        LogFile "--------------------------------------------"
1461        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1462        LogFile "------------------------------------------------"
1463    fi
1464}
1465
1466
1467MakeISOErrors() {
1468
1469LogFile "----------- $ISO_CMD's errors --------------"
1470LogAll "Command invoked: $CMD ."
1471LogAll "$ISO_CMD returned the following errors:"
1472cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1473LogAll "ERROR: Failed to create ISO image."
1474}
1475
1476MakeISO() {
1477
1478LogAll "INFO: Generating ISO image."
1479LOCISO=`echo $CMD | perl -p -e 's|.* -o (.+)/mindi.iso .*|$1|'`
1480(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1481if [ $? -ne 0 ] ; then
1482    # In case of UEFI handle differences in option handling
1483    if [ "$BOOT_TYPE" = "UEFI" ]; then
1484        CMD=`echo $CMD | perl -p -e 's|--efi-boot |-eltorito-platform 0xEF -eltorito-boot |; s|-efi-boot |-eltorito-platform 0xEF -eltorito-boot |;'`
1485        (cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1486        if [ $? -ne 0 ] ; then
1487            # xorriso e.g.
1488            CMD=`echo $CMD | perl -p -e 's|-eltorito-platform 0xEF ||'`
1489            (cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1490            if [ $? -eq 0 ] ; then
1491                LogAll "INFO: Invoking $CMD ."
1492                LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
1493            else
1494                MakeISOErrors
1495            fi
1496        else
1497            LogAll "INFO: Invoking $CMD ."
1498            LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
1499        fi
1500    else
1501        MakeISOErrors
1502    fi
1503else
1504    LogAll "INFO: Invoking $CMD ."
1505    LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
1506fi
1507rm -f $MINDI_TMP/mkisofs.log
1508}
1509
1510MakeBootableDevice() {
1511
1512local target tbc retval part size mount_opt
1513
1514target="$1"
1515
1516rm -Rf $MINDI_TMP/target
1517mkdir -p $MINDI_TMP/target/{images,archives,tmp}
1518
1519LogAll "INFO: Copying $MINDI_CACHE/*.gz to $MINDI_TMP/target/images"
1520cp -f $MINDI_CACHE/*.gz $MINDI_TMP/target/images 2>> $LOGFILE || LogAll "WARNING: MakeBootableDevice: Cannot copy files to $MINDI_TMP/target/images"
1521for i in memdisk memtest.bin memtest.img ; do
1522    j=$MINDI_LIB/$i
1523    k=$MINDI_TMP/target
1524    if [ -e "$j" ] ; then
1525        LogAll "INFO: Copying $j to $k"
1526        cp -f $j $k 2>> $LOGFILE || LogAll "Failed to copy $j to $k"
1527        cp -f $j $MINDI_TMP 2>> $LOGFILE || LogAll "Failed to copy $j to $MINDI_TMP"
1528        if [ _"$MONDO_SHARE" != _"" ]; then 
1529            cp -f $j $MONDO_ROOT 2>> $LOGFILE || LogAll "Failed to copy $j to $MONDO_ROOT"
1530        fi
1531    fi
1532done
1533
1534retval=0
1535LogAll "INFO: Copying $kernelpath to $MINDI_TMP/target/vmlinuz"
1536cp $kernelpath $MINDI_TMP/target/vmlinuz 2>> $LOGFILE
1537if [ $? -ne 0 ] ; then
1538    LogAll "ERROR: Failed to copy $kernelpath $MINDI_TMP/target/"
1539    retval=$(($retval+1))
1540fi
1541LogAll "INFO: Copying $MINDI_TMP/initrd.img to $MINDI_TMP/target/initrd.img"
1542cp $MINDI_TMP/initrd.img $MINDI_TMP/target/ 2>> $LOGFILE
1543if [ $? -ne 0 ] ; then
1544    LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MINDI_TMP/target/"
1545    retval=$(($retval+1))
1546fi
1547
1548# copy boot stuff now generated in PrepareDataDiskImage
1549if [ "$BOOT_TYPE" = "UEFI" ]; then
1550    (cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
1551    tbc="EFI"
1552    # Also prepare a BIOS compatible boot
1553    if  [ "$target" = "ISO" ]; then
1554        cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
1555    fi
1556else
1557    (cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
1558    tbc="syslinux"
1559    if [ -f "$MINDI_TMP/target/$tbc/syslinux.cfg" ]; then
1560        LogFile "----------- syslinux's conf --------------"
1561        cat $MINDI_TMP/target/$tbc/syslinux.cfg >> $LOGFILE
1562        LogFile "------------------------------------------"
1563    fi
1564    if  [ "$target" = "ISO" ]; then
1565        cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
1566        if [ $? -ne 0 ] ; then
1567            LogAll "ERROR: Failed to copy $ISOLINUX to $MINDI_TMP/target/$tbc"
1568            retval=$(($retval+1))
1569        fi
1570    fi
1571fi
1572
1573if [ "$ARCH" != "ia64" ] ; then
1574    if [ $KERNEL_IS_XEN = "yes" ]; then
1575        FindMboot32Binary
1576        cp $xenkernelpath $MINDI_TMP/target/xen.gz 2>> $LOGFILE
1577        if [ $? -ne 0 ] ; then
1578            LogAll "ERROR: Failed to copy $xenkernelpath to $MINDI_TMP/target/"
1579            retval=$(($retval+1))
1580        fi
1581        cp $MBOOTC32 $MINDI_TMP/target/$tbc/mboot.c32  2>> $LOGFILE
1582        if [ $? -ne 0 ] ; then
1583            LogAll "ERROR: Failed to copy $MBOOTC32 to $MINDI_TMP/target/$tbc"
1584            retval=$(($retval+1))
1585        fi
1586    fi
1587fi
1588
1589MakeMessageFile $MINDI_TMP/target/$tbc | cut -c1-80 > $MINDI_TMP/target/$tbc/message.txt
1590
1591if [ _"$MONDO_SHARE" != _"" ]; then 
1592    cp -rf $MINDI_TMP/target/$tbc $MONDO_ROOT 2>> $LOGFILE
1593    if [ $? -ne 0 ] ; then
1594        LogAll "ERROR: Failed to copy $MINDI_TMP/target/$tbc to $MONDO_ROOT"
1595        LogAll "       Please check the target directory."
1596        retval=$(($retval+1))
1597    fi
1598    if [ $KERNEL_IS_XEN = "yes" ]; then
1599        cp -f $MINDI_TMP/target/xen.gz $MONDO_ROOT 2>> $LOGFILE
1600        if [ $? -ne 0 ] ; then
1601            LogAll "ERROR: Failed to copy $MINDI_TMP/target/xen.gz to $MONDO_ROOT"
1602            LogAll "       Please check the target directory."
1603            retval=$(($retval+1))
1604        fi
1605    fi
1606    cp -f $MONDO_SHARE/autorun $MINDI_TMP/target 2>> $LOGFILE
1607    cp -f $MINDI_TMP/target/vmlinuz $MONDO_ROOT 2>> $LOGFILE
1608    if [ $? -ne 0 ] ; then
1609        LogAll "ERROR: Failed to copy $MINDI_TMP/vmlinuz to $MONDO_ROOT"
1610        LogAll "       Please check the target directory."
1611        retval=$(($retval+1))
1612    fi
1613    cp -f $MINDI_TMP/target/initrd.img $MONDO_ROOT 2>> $LOGFILE
1614    if [ $? -ne 0 ] ; then
1615        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MONDO_ROOT"
1616        LogAll "       Please check the target directory."
1617        retval=$(($retval+1))
1618    fi
1619fi
1620
1621if [ -f "$MINDI_TMP/$MRCFG" ]; then
1622    cp -f $MINDI_TMP/$MRCFG $MINDI_TMP/target/tmp
1623fi
1624
1625LogFile "----------- target dir content -----------"
1626LogFile "------------------------------------------"
1627ls -lR $MINDI_TMP/target >> $LOGFILE
1628LogFile "------------------------------------------"
1629LogFile "----------- target dir sizes -------------"
1630du -sk $MINDI_TMP/target/* >> $LOGFILE
1631LogFile "------------------------------------------"
1632
1633if [ "$retval" -ne "0" ] ; then
1634    LogFile "--------------------------------"
1635    LogFile "INFO: Size of $MINDI_TMP/target:"
1636    du -sk $MINDI_TMP/target/* >> $LOGFILE
1637    LogFile "--------------------------------"
1638    echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1639    sync
1640    umount $MINDI_TMP/target
1641    LogAll "ERROR: Problems while creating boot media."
1642    LogAll "       Please unload some of your modules and try again."
1643    Die    "       Try to increase EXTRA_SPACE in $MINDI_CONFIG"
1644fi
1645
1646mkdir -p $MINDI_TMP/mpt
1647
1648if  [ "$target" = "USB" ]; then
1649    LogAll "INFO: Transforming $USBDEVICE in a Bootable device"
1650    LogAll "INFO: Checking $USBDEVICE"
1651    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1652    if [ $? -ne 0 ]; then
1653        LogAll "ERROR: Unable to access $USBDEVICE"
1654        LogAll "       Make sure your USB device is plugged in"
1655        MindiExit -1
1656    fi
1657    # Some distro do auto mount at that point (Ubuntu)
1658    LogAll "INFO: Unmounting $USBPART just in case"
1659    sync
1660    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1661    if [ "$BOOT_TYPE" = "BIOS" ]; then
1662        # If your key has no MBR it may cause an issue
1663        # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1664        if [ -r $MBRFILE ]; then
1665            LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1666            dd if=$MBRFILE of=$USBDEVICE >> $LOGFILE 2>> $LOGFILE
1667        else
1668            LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1669            LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1670        fi
1671    fi
1672    LogAll "INFO: Preparing $USBDEVICE"
1673    cat > $MINDI_TMP/fdisk.txt << EOF
1674d
1675d
1676d
1677d
1678n
1679p
16801
1681
1682
1683t
1684b
1685a
16861
1687w
1688EOF
1689    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1690    if [ $? -ne 0 ]; then
1691        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1692        LogAll "       Make sure your USB device is plugged in"
1693        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1694        MindiExit -1
1695    fi
1696    LogFile "fdisk build file"
1697    LogFile "----------------"
1698    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1699    LogFile "----------------"
1700    rm -f $MINDI_TMP/fdisk.txt
1701    LogAll "INFO: The USB device $USBDEVICE now looks like this:"
1702    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1703    # Calling kpartx in case devices were not created
1704    if [ -x "/sbin/kpartx" ]; then
1705        /sbin/kpartx -a $USBDEVICE
1706    fi
1707    # Some distro do auto mount at that point (Ubuntu)
1708    LogAll "INFO: Unmounting $USBPART just in case again"
1709    sync
1710    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1711    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1712    if [ "`which dmsetup`" != "" ]; then
1713        block_id="`echo $USBPART | sed 's/\/dev\///g'`"
1714        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1715            LogAll "INFO: Removing $block_id from device mapper."
1716            sleep 1
1717            dmsetup remove $block_id
1718        fi
1719    fi
1720    part=$USBPART
1721    mount_opt=""
1722else
1723    # ISO image
1724    part=$MINDI_TMP/mindi-bootroot.img
1725    size=`du -sk $MINDI_TMP/target 2> /dev/null | cut -f1`
1726    # Adds 10 MB to allow for additional space
1727    size=$(($size+10000))
1728    LogAll "INFO: Creating a $size KB empty file for boot device of the ISO image"
1729    dd if=/dev/zero of=$part bs=1k count=$size &> /dev/null || Die "Cannot dd blank $part"
1730    mount_opt="-o loop"
1731fi
1732
1733LogAll "INFO: Creating a vfat filesystem on $part"
1734
1735mkfs.vfat $part 2>&1 >> $LOGFILE
1736if [ $? -ne 0 ]; then
1737    LogAll "ERROR: Unable to create a vfat filesystem on $part"
1738    if  [ "$target" = "USB" ]; then
1739        LogAll "       Make sure your USB device is plugged in and partitioned ($part must exist on it)"
1740        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1741    fi
1742    MindiExit -1
1743fi
1744if  [ "$target" = "ISO" ]; then
1745    if [ "$BOOT_TYPE" = "BIOS" ]; then
1746        # syslinux should be run on a local file (doen't work through NFS Cf: #297)
1747        # and run after the formating for versions > 6 it seems
1748        syslinux $part >> $LOGFILE 2>> $LOGFILE
1749    fi
1750fi
1751LogAll "INFO: Mounting $part on $MINDI_TMP/mpt"
1752mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
1753if [ $? -ne 0 ]; then
1754    LogAll "ERROR: Unable to mount $part on $MINDI_TMP/mpt"
1755    if  [ "$target" = "USB" ]; then
1756        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($part must exist on it)"
1757        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1758    fi
1759    MindiExit -1
1760fi
1761
1762LogAll "INFO: Moving boot info on $MINDI_TMP/mpt"
1763mv $MINDI_TMP/target/* $MINDI_TMP/mpt
1764if [ $? -ne 0 ] ; then
1765    LogFile "--------------------------------"
1766    LogFile "INFO: Size of $MINDI_TMP/mpt:"
1767    du -sk $MINDI_TMP/mpt/* >> $LOGFILE
1768    LogFile "--------------------------------"
1769    sync
1770    umount $MINDI_TMP/mpt
1771    LogAll "ERROR: Problems while creating boot media."
1772    LogAll "       Please unload some of your modules and try again."
1773    Die    "       Try to increase EXTRA_SPACE in $MINDI_CONFIG"
1774fi
1775
1776if  [ "$target" = "ISO" ]; then
1777    if [ "$ARCH" != "ia64" ]; then
1778        ISO_OPT="$ISO_OPT -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
1779    fi
1780    # ISO
1781    if [ "$ARCH" != "ia64" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
1782        CMD="$ISO_CMD $ISO_OPT"
1783        MakeISO
1784    else
1785        if [ "$ARCH" = "ia64" ]; then
1786            CMD="$ISO_CMD $ISO_OPT -b images/mindi-bootroot.img -c images/boot.cat"
1787        else
1788            # UEFI
1789            echo "$CMD" | grep -q "xorriso"
1790            if [ $? -eq 0 ]; then
1791                XOV=`xorriso --version 2>&1 | head -1 | awk '{print $3}'`
1792                XOVMAJ=`echo $XOV | cut -d. -f1`
1793                XOVMIN=`echo $XOV | cut -d. -f2`
1794                if [ $XOVMAJ -ge 1 && $XOVMIN -ge 3 ]; then
1795                    CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -e images/mindi-bootroot.img -no-emul-boot"
1796                else
1797                    CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot --efi-boot images/mindi-bootroot.img"
1798                fi
1799            else
1800                CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
1801            fi
1802        fi
1803    fi
1804fi
1805
1806# Avoids graphical tool to keep the FS mounted
1807sync
1808umount $MINDI_TMP/mpt || Die "Unable to unmount $MINDI_TMP/mpt"
1809
1810if  [ "$target" = "ISO" ]; then
1811    cp $part $MINDI_CACHE
1812    if [ "$ARCH" = "ia64" ] || [ "$BOOT_TYPE" = "UEFI" ]; then
1813        # We just need the EFI dir and the boot image for this case
1814        mkdir -p $MINDI_TMP/mpt2 $MINDI_TMP/mpt/images $MINDI_TMP/mpt/archives
1815        mount -o loop $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt2 2>> $LOGFILE
1816        # We need again the kernel+initrd at the root for UEFI boot at least
1817        cp -a $MINDI_TMP/mpt2/EFI $MINDI_TMP/mpt2/vmlinuz $MINDI_TMP/mpt2/initrd.img $MINDI_TMP/mpt
1818        # We need the boot image now and what mindi needs at restore time as well
1819        cp -a $MINDI_TMP/mpt2/images/all.tar.gz $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt/images
1820        # Avoids graphical tool to keep the FS mounted
1821        sync
1822        umount $MINDI_TMP/mpt2
1823        LogFile "----------- target dir content -----------"
1824        LogFile "------------------------------------------"
1825        ls -lR $MINDI_TMP/mpt >> $LOGFILE
1826        LogFile "------------------------------------------"
1827        MakeISO
1828    fi
1829else
1830    # USB
1831    if [ "$ARCH" != "ia64" ] ; then
1832        syslinux -v 2>&1 | grep -q 4.02
1833        if [ $? -eq 0 ]; then
1834            # This buggy version of syslinux requires a call to --stupid and not -s
1835            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1836            res=$?
1837        else
1838            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1839            res=$?
1840        fi
1841        if [ $res -ne 0 ] ; then
1842            LogAll "----------- syslinux's errors --------------"
1843            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1844            LogAll "------------------------------------------"
1845            LogAll "ERROR: Failed to create USB image."
1846        else
1847            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1848        fi
1849        rm -f $MINDI_TMP/syslinux.log
1850    else
1851        LogAll "ERROR: No USB boot support for ia64"
1852        MindiExit -1
1853    fi
1854fi
1855}
1856
1857
1858OfferToMakeBootableUSB() {
1859
1860local i files
1861
1862if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1863    echo -en "\nShall I make a bootable USB device ? (y/[n]) "
1864    read i
1865    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1866    if [ "$USBDEVICE" = "" ]; then
1867        echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1868        read dev
1869        USBDEVICE=$dev
1870    fi
1871    echo "WARNING: This will erase all content on $USBDEVICE"
1872    echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1873    read i
1874    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1875else
1876    if [ "$PROMPT_MAKE_USB_IMAGE" = "no" ] && [ _"$MONDO_SHARE" = _"" ] && [ "$USBDEVICE" = "" ]; then
1877        Die "No USBDEVICE environment variable declared, aborting"
1878    fi
1879fi
1880USBPART="${USBDEVICE}1"
1881
1882MakeBootableDevice USB
1883}
1884
1885
1886OfferToMakeBootableISO() {
1887
1888local i files
1889
1890if [ -z "$ISO_CMD" ]; then
1891    LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
1892    return
1893fi
1894
1895if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1896    echo -en "\nShall I make a bootable CD image? (y/[n]) "
1897    read i
1898    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1899fi
1900
1901MakeBootableDevice ISO
1902
1903}
1904
1905
1906MakeMessageFile() {
1907   
1908    if [ -x "/bin/lsb_release" ]; then
1909        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1910    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1911        DESC="Arch Linux"
1912        if [ -r /var/log/pacman.log ]; then
1913            # there are no releases but we can get the last system upgrade
1914            # Output example:   Arch Linux [2011-03-03 01:39]
1915            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1916        fi
1917    elif [ -x "/etc/os-release" ]; then
1918        DESC=`grep PRETTY_NAME /etc/os-release | cut -d= -f2`
1919    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1920        # For pb >= 0.9.8
1921        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4 | sed 's/,/-/g'`
1922    elif [ -r /etc/issue.net ]; then
1923        DESC=`head -1 /etc/issue.net`
1924    elif [ -r /etc/issue ]; then
1925        DESC=`head -1 /etc/issue`
1926    else
1927        DESC="Unknown desc"
1928    fi
1929    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1930    if [ _"$MONDO_SHARE" != _"" ]; then
1931        if [ "$CDRECOVERY" != "yes" ] ; then
1932            if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1933                echo -en "Press <0eenter07> for 0cnetwork restore07\n"
1934                echo -en "$BOOT_MEDIA_MESSAGE"
1935            elif [ ! "$MINDI_TMP" ] ; then
1936                echo -en "FYI, this is _not_ a MondoRescue CD.\n"
1937                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1938                    echo -en "Type 'memtest' <Enter> to test your machine's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1939                fi
1940            else
1941                echo -en "$BOOT_MEDIA_MESSAGE"
1942            fi
1943        else
1944            echo -en "\
1945To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1946CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1947        fi
1948    fi
1949
1950    # Also create the other help screens
1951    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1952    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1953    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1954}
1955
1956
1957MakeBootConfFile() {
1958    local options i ooo
1959    options=""
1960    # Type of boot file (elilo or syslinux/isolinux)
1961    type=$1
1962    if [ "$type" = "elilo" ] || [ "$type" = "grub2" ]; then
1963        sep="="
1964        sepdef="="
1965    else
1966        sep=" "
1967        sepdef=" "
1968    fi
1969
1970    # Generic header for conf file
1971    if [ "$type" = "elilo" ]; then
1972        echo -en "prompt\n"
1973    elif [ "$type" = "grub" ]; then
1974        echo -en "pause Press a key when ready to restore\n"
1975    elif [ "$type" = "grub2" ]; then
1976        echo -en "set "
1977    else
1978        # syslinux family
1979        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1980    fi
1981
1982    # Compute which default option to boot from
1983    echo -en "default${sepdef}"
1984    if [ "$CDRECOVERY" = "yes" ] ; then
1985        if [ "$type" = "grub" ]; then
1986            # TODO: Which num ???
1987            echo -en "0\n"
1988        else
1989            echo -en "RESTORE\n"
1990        fi
1991    # In case it's mondoarchive
1992    elif [ _"$MONDO_SHARE" != _"" ]; then
1993        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1994            if [ "$type" = "grub" ]; then
1995                echo -en "3\n"
1996            else
1997                echo -en "iso\n"
1998            fi
1999        else
2000            if [ "$type" = "grub" ]; then
2001                echo -en "1\n"
2002            else
2003                echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
2004            fi
2005        fi
2006    else
2007        if [ "$type" = "grub" ]; then
2008            echo -en "0\n"
2009        else
2010            echo -en "expert\n"
2011        fi
2012    fi
2013
2014    # Handle timeout
2015    if [ "$type" = "grub2" ]; then
2016        seppref="set "
2017    else
2018        seppref=""
2019    fi
2020    if [ "$CDRECOVERY" = "yes" ] ; then
2021        echo -en "${seppref}timeout${sep}10000\n"
2022    else
2023        echo -en "${seppref}timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
2024    fi
2025    echo -en "\n"
2026
2027    # prepare which labels will be generated
2028    if [ "$CDRECOVERY" = "yes" ] ; then
2029        options="RESTORE expert"
2030    else
2031        if [ _"$MONDO_SHARE" != _"" ]; then
2032            options="interactive expert compare iso nuke isonuke"
2033        else
2034            options="expert"
2035        fi
2036    fi
2037
2038    # Generate rest of conf file
2039    for i in $options ; do
2040        ooo=$i
2041        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
2042        if [ "$type" = "elilo" ]; then
2043            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
2044        elif [ "$type" = "grub" ]; then
2045            outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
2046        elif [ "$type" = "grub2" ]; then
2047            if [ "$BOOT_TYPE" = "UEFI" ]; then
2048                lorder="linuxefi"
2049                iorder="initrdefi"
2050            else
2051                lorder="linux"
2052                iorder="initrd"
2053            fi
2054            outstr="menuentry '$i' {\n\tinsmod all_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod part_gpt\n\tinsmod ext2\n\tinsmod xfs\n\techo 'Loading kernel...'\n\t$lorder /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\techo 'Loading ramdisk...'\n\t$iorder /initrd.img\n}\n"
2055        else
2056            ps="/"
2057            if [ $KERNEL_IS_XEN = "no" ]; then
2058                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
2059            else
2060                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
2061            fi
2062        fi
2063        echo -en "$outstr"
2064    done
2065    if [ -e "$MINDI_LIB/memtest.img" ] ; then
2066        if [ "$type" = "elilo" ]; then
2067            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
2068            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
2069        elif [ "$type" = "grub" ]; then
2070            echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
2071        elif [ "$type" = "grub2" ]; then
2072            echo -en "menuentry 'memtest' {\n\tload_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod xfs\n\tlinux /memtest\n\tinitrd /memtest.img\n}\n"
2073        else
2074            ps="/"
2075            if [ "$type" = "syslinux" ]; then
2076                ps=""
2077            fi
2078            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
2079            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
2080        fi
2081    fi
2082}
2083
2084ParseModprobeForIncludes() {
2085local MODPROBE_CONF mpincfile includes include
2086
2087MODPROBE_CONF=/etc/modprobe.conf
2088mpincfile=$1
2089touch $mpincfile
2090if [ -a $MODPROBE_CONF ]; then
2091    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2092    if [ -n "$includes" ]; then
2093        for include in $includes
2094        do
2095            if [ -a "$include" ]; then
2096                echo $include >> $mpincfile
2097            fi
2098        done
2099    fi
2100fi
2101}
2102
2103PrepareBootDir() {
2104
2105        local detect
2106# Needs a bigdir variable setup before calling it
2107
2108    # copy (e)lilo/isolinux/grub/whatever stuff into it as well
2109    # to get it on the media (in addition to the boot part
2110    # and also to support UEFI boot mechanism
2111    if [ "$boottype" != "" ]; then
2112        detect="no"
2113    else
2114        detect="yes"
2115        boottype=syslinux
2116    fi
2117    bootdir=$bigdir/$boottype
2118    bootconf="$bootdir/$boottype.cfg"
2119    mkdir -p $bootdir
2120    FindLdlinux32Binary
2121
2122    if [ "$BOOT_TYPE" != "BIOS" ]; then
2123        if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
2124            LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
2125            MindiExit -1
2126        fi
2127
2128        mountefi=0
2129        # EFI or UEFI
2130        # TODO: names are hard-coded for now
2131        if [ "$BOOT_TYPE" = "UEFI" ]; then
2132            # UEFI
2133            efidir=$bigdir/EFI/BOOT
2134            # Auto-detection if needed
2135            if [ $detect = "yes" ]; then
2136
2137                # mount /boot/efi if needed
2138                df -T | grep /boot/efi | grep -qE 'vfat'
2139                if [ $? -ne 0 ]; then
2140                    mount /boot/efi
2141                    if [ $? -ne 0 ]; then
2142                        echo "ERROR: You have to mount your (U)EFI partition when using mindi"
2143                        MindiExit -1
2144                    fi
2145                    mountefi=1
2146                fi
2147
2148                # On RHEL6 grub works
2149                dname=`pbdistrocheck | grep -E '^Name:' | cut -d':' -f2`
2150                dver=`pbdistrocheck | grep -E '^Ver:' | cut -d':' -f2`
2151                if [ $dname = "rhel" -o $dname = "centos" -o $dname = "oel" ] && [ $dver = "6" ]; then
2152                    boottype=grub
2153                elif [ $dname = "rhel" -o $dname = "centos" -o $dname = "oel" ] && [ $dver -ge 7 ]; then
2154                    boottype=grub2
2155                elif [ $dname = "fedora" ] && [ $dver -ge 20 ]; then
2156                    boottype=grub2
2157                elif [ $dname = "debian" ] && [ $dver -ge 8 ]; then
2158                    boottype=grub2
2159                else
2160                    # Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
2161                    boottype=syslinux
2162                fi
2163            fi
2164            if [ "$boottype" = "syslinux" ]; then
2165                if [ ! "$bootbin" ]; then
2166                    FindSyslinux64EFI
2167                    bootbin=$SYSLINUX64EFI
2168                fi
2169                bootconf="$efidir/syslinux.cfg"
2170            elif [ "$boottype" = "grub" ]; then
2171                if [ ! "$bootbin" ]; then
2172                    bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2173                fi
2174                bootconf="$efidir/BOOTX64.conf"
2175            elif [ "$boottype" = "grub2" ]; then
2176                if [ ! "$bootbin" ]; then
2177                    bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2178                fi
2179                bootconf="$efidir/grub.cfg"
2180            fi
2181
2182            # Depending on the arch, the target boot file is different
2183            if [ "$ARCH" = "x86_64" ] ; then
2184                tgbin="BOOTX64.efi"
2185            elif [ "$ARCH" = "armv8" ]; then
2186                tgbin="BOOTAA64.efi"
2187            else
2188                # i?386
2189                tgbin="BOOTIA32"
2190            fi
2191        else
2192            # EFI
2193            efidir=$bootdir
2194            bootbin=`find /boot/efi -iname "elilo.efi" | head -1`
2195            tgbin=$bootbin
2196            boottype=elilo
2197            bootconf="$efidir/elilo.conf"
2198        fi
2199        LogAll "INFO: Found $boottype boot type"
2200        mkdir -p $efidir
2201        cp $bootbin $efidir/$tgbin
2202
2203        if [ $mountefi -eq 1 ]; then
2204            umount /boot/efi 2>&1 > /dev/null
2205        fi
2206
2207        if [ $boottype = "syslinux" ]; then
2208            FindLdlinuxe64Binary
2209            if [ -e "$LDLINUXE64" ]; then
2210                LogFile "INFO: Copying $LDLINUXE64 to $efidir"
2211                cp $LDLINUXE64 $efidir 2>> $LOGFILE || Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
2212                cp $LDLINUXE64/../libutil.c32 $efidir 2>> $LOGFILE || Die "Cannot copy libutil.c32 to $efidir). Did you run out of disk space?"
2213                if [ -e $LDLINUXE64/../isolinux.c32 ]; then
2214                    cp $LDLINUXE64/../isolinux.c32 $efidir 2>> $LOGFILE || Die "Cannot copy isolinux.c32 to $efidir). Did you run out of disk space?"
2215                fi
2216            fi
2217        fi
2218        # tgdir for syslinux
2219        tgdir=$bigdir/EFI
2220    else
2221        # tgdir for syslinux
2222        tgdir=$bootdir
2223    fi
2224    # In all cases prepare syslinux content for BIOS mode
2225    # so that we can have multi boot mode media BIOS+UEFI
2226    # Useful for syslinux 5.x
2227    if [ -e "$LDLINUXC32" ]; then
2228        LogFile "INFO: Copying $LDLINUXC32 to $tgdir"
2229        cp $LDLINUXC32 "$tgdir" 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $tgdir. Did you run out of disk space?"
2230    fi
2231    if [ -e $LDLINUXC32/../isolinux.c32 ]; then
2232        LogFile "INFO: Copying isolinux.c32 to $tgdir"
2233        cp $LDLINUXC32/../isolinux.c32 $tgdir 2>> $LOGFILE || Die "Cannot copy isolinux.c32 to $tgdir). Did you run out of disk space?"
2234    fi
2235
2236    # Here we need to know the ramdisk_size
2237    size_of_all_tools=`du -sk $bigdir | cut -f1`
2238    export ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
2239    LogFile "INFO: Ramdisk will be $ramdisk_size KB"
2240
2241    MakeBootConfFile $boottype > $bootconf
2242    LogFile "Boot Conf file $bootconf content is:"
2243    LogFile "------------------------------------"
2244    cat $bootconf >> $LOGFILE
2245    LogFile "------------------------------------"
2246    if [ "$BOOT_TYPE" = "UEFI" ]; then
2247        # Also generate the syslinux conf
2248        MakeBootConfFile syslinux > "$bigdir/EFI/syslinux.cfg"
2249        LogFile "Boot Conf file $bigdir/EFI/syslinux.cfg content is:"
2250        LogFile "---------------------------------------------------"
2251        cat $bigdir/EFI/syslinux.cfg >> $LOGFILE
2252        LogFile "---------------------------------------------------"
2253    fi
2254
2255}
2256
2257PrepareAllTar() {
2258    echo -en "INFO: Tarring and zipping the data content..."
2259    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $MINDI_CACHE/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2260    LogFile "Size of the data content"
2261    LogFile "------------------------"
2262    du -sk $MINDI_CACHE/*gz >> $LOGFILE
2263    LogFile "------------------------"
2264    echo -e "$DONE"
2265
2266    [ "$bigdir" != "/" ] && rm -rf $bigdir
2267}
2268
2269PrepareDataDiskImages() {
2270    local needlist bigdir diskdir res i j k lines lfiles includefile
2271
2272    rm -f $MINDI_CACHE/mindi.iso
2273    needlist=$MINDI_TMP/what-we-need.txt
2274    bigdir=$MINDI_TMP/bigdir
2275    mkdir -p $bigdir/usr/bin
2276    mkdir -p $bigdir/usr/sbin
2277    includefile=$MINDI_TMP/$$.includefile.txt
2278
2279    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2280    if [ -e "$DEPLIST_FILE" ]; then
2281        lfiles="$DEPLIST_FILE $lfiles"
2282    fi
2283    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2284    ParseModprobeForIncludes $includefile
2285    lines=$(($lines+`cat $includefile | wc -l`))
2286    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2287    res=$?
2288    rm -f $includefile
2289    ListKernelModulePaths >> $needlist
2290    if [ "$res" -ne "0" ] ; then
2291        Die "You have $res files present in dependency list\nbut absent from filesystem."
2292    fi
2293    mkdir -p $bigdir/tmp
2294    if [ _"$MONDO_SHARE" != _"" ]; then
2295        # TODO: no reason to have the cfg file stored twice
2296        MakeMondoConfigFile $MINDI_TMP/$MRCFG
2297        cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
2298    fi
2299
2300    # Needs to be done after the MRCFG creation
2301    FindAndAddUserKeyboardMappingFile
2302
2303    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2304    DropOptimizedLibraries $needlist $bigdir
2305    echo -en "INFO: Assembling dependency files"
2306
2307    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist` 1
2308    rm -f $needlist
2309    echo -e "$DONE"
2310
2311    # also copy io.sys and msdos.sys, if we can find them
2312    for i in `mount | cut -d' ' -f3` ; do
2313        for j in io.sys msdos.sys ; do
2314            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2315        done
2316    done
2317
2318    # master boot record, too
2319    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2320    if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
2321        LogAll "INFO: Backing up $i's MBR"
2322        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2323        sleep 1
2324        sync
2325        j=$i
2326        [ -h "$j" ] && j=`readlink -f $j`
2327        LogAll "INFO: Creating /dev/boot_device ($j)"
2328        mkdir -p $bigdir/dev
2329        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2330    fi
2331
2332    # Get terminfo content
2333    ti="usr/share/terminfo/l"
2334    if [ -d /$ti ]; then
2335        mkdir -p $bigdir/$ti
2336        cp -Rdf /$ti/* $bigdir/$ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2337    fi
2338    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2339        cp -Rdf $MONDO_SHARE/restore-scripts/mondo/* $bigdir/usr/bin 2>> $LOGFILE
2340        [ $? -ne 0 ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2341        cp -Rdf $MONDO_SHARE/restore-scripts/etc/* $bigdir/etc 2>> $LOGFILE
2342    fi
2343    if [ -d "/lib/dev-state" ]; then 
2344        cp -a /lib/dev-state $bigdir/lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2345    fi
2346    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2347    MakeMountlist $MINDI_TMP/mountlist.txt
2348    CheckMountlist $MINDI_TMP/mountlist.txt
2349    mkdir -p $bigdir/tmp
2350    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2351    if [ _"$MONDO_SHARE" != _"" ]; then
2352        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2353    fi
2354    if [ $LVM != "false" ]; then
2355        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2356        if [ $? -ne 0 ]; then
2357            LVM="false"
2358            rm -f $bigdir/tmp/i-want-my-lvm
2359        else
2360            LogFile "Your i-want-my-lvm file content is:"
2361            LogFile "-----------------------------------"
2362            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2363            LogFile "-----------------------------------"
2364        fi
2365    fi
2366    LogFile "INFO: Your mountlist.txt file content is:"
2367    LogFile "-----------------------------------"
2368    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2369    LogFile "-----------------------------------"
2370
2371    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2372    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2373    if [ _"$MONDO_SHARE" != _"" ]; then
2374        for q in filelist.full.gz biggielist.txt ; do
2375            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2376            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2377        done
2378    fi
2379
2380    PrepareBootDir
2381    PrepareAllTar
2382}
2383
2384
2385Prompt() {
2386    echo -en "$1"
2387    read line
2388}
2389
2390
2391ReadLine() {
2392    local i incoming
2393    read incoming
2394    i=0
2395    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2396        i=$(($i+1))
2397        read incoming
2398    done
2399    echo "$incoming"
2400}
2401
2402
2403SizeOfPartition() {
2404    local devpath drive res stub
2405    device=$1
2406    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2407        Die "Cannot find $device's size - is your /etc/fstab sane?"
2408    fi
2409    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2410        res=`SizeOfRaidPartition $device`
2411        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2412        echo "$res"
2413        return 0
2414    fi
2415    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2416    res=`$FDISK -s $device 2>> $LOGFILE`
2417    # end patch
2418    # take only the first in case of multiple mount (cifs, nfs, ...)
2419    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2420    [ "$res" = "" ] && res="-1"
2421    echo $res
2422    return 0
2423}
2424
2425
2426SizeOfRaidPartition() {
2427    local real_dev smallest_size silly tmp
2428
2429    silly=999999999
2430    smallest_size=$silly
2431
2432    for real_dev in `GetRaidDevMembers $1` ; do
2433        tmp=`SizeOfPartition $real_dev`
2434        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2435    done
2436
2437    if [ "$smallest_size" = "$silly" ] ; then
2438        echo "-1"
2439        return 1
2440    else
2441        echo "$smallest_size"
2442        return 0
2443    fi
2444}
2445
2446
2447StripExecutable()
2448{
2449    local tmpfile
2450
2451    tmpfile=$MINDI_TMP/stripped.$$.dat
2452    [ -d "$1" ] || [ -h "$1" ] && return
2453    cp -f $1 $tmpfile 2>> $LOGFILE
2454    strip $tmpfile 2> /dev/null
2455    if [ $? -eq 0 ] ; then
2456        cp -f $tmpfile $1 2>> $LOGFILE
2457        LogFile "INFO: Stripped binary $2"
2458    fi
2459    rm -f $tmpfile
2460}
2461
2462KernelVer() {
2463        local fkern_ver fname
2464
2465        fname=$1
2466        file $fname | grep -q gzip
2467        if [ $? -eq 0 ] ; then
2468            # Used by ia64
2469            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2470        else
2471            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2472        fi
2473        echo "$fkern_ver"
2474}
2475
2476
2477# WARNING: This function should just echo the final result !!!
2478#
2479TryToFindKernelPath() {
2480    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2481
2482    we_want_version=$KERVERRUN
2483    possible_kernels=""
2484    duff_kernels=""
2485    output=""
2486
2487    if [ "$ARCH" = "ia64" ] ; then
2488       root="/boot/efi/efi"
2489    else
2490       root="/"
2491    fi
2492    # See if we're booted from a Xen kernel
2493    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2494    if [ -f /proc/xen/capabilities ]; then
2495        # It's a Xen kernel
2496        KERNEL_IS_XEN="yes"
2497        LogFile "INFO: It's a Xen kernel..."
2498    fi
2499
2500    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2501        [ ! -e "$fname" ] && continue
2502        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2503        fkern_ver=`KernelVer $fname`
2504        [ "$fkern_ver" = "" ] && continue
2505        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2506        [ -f "$fname" ] || continue
2507        [ -h "$fname" ] && continue
2508        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2509        file $fname | grep -q gzip
2510        if [ $? -eq 0 ] ; then
2511            # Used by ia64
2512            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2513                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2514                duff_kernels="$fname $duff_kernels"
2515            else
2516                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2517                possible_kernels="$fname $possible_kernels"
2518            fi
2519        else
2520            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2521                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2522                duff_kernels="$fname $duff_kernels"
2523            else
2524                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2525                possible_kernels="$fname $possible_kernels"
2526            fi
2527        fi
2528    done
2529    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2530        possible_kernels=`find /boot/vmlinuz-[2-9].* | tail -n1`
2531    fi
2532    if [ ! "$possible_kernels" ] ; then
2533        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2534        possible_kernels="$duff_kernels"
2535        if [ ! "$possible_kernels" ] ; then
2536            LogAll "INFO: Sorry, no duff kernels either"
2537        else
2538            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2539            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2540        fi
2541    fi
2542    if [ $KERNEL_IS_XEN = "yes" ]; then
2543        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2544        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2545    fi
2546    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2547    noof_kernels=`CountItemsIn "$possible_kernels"`
2548    if [ "$noof_kernels" -eq "0" ] ; then
2549        LogAll "Could not find your kernel."
2550        if [ -e "/boot/vmlinuz" ] ; then
2551            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2552            output=/boot/vmlinuz
2553        else
2554            output=""
2555        fi
2556    elif [ "$noof_kernels" -eq "1" ] ; then
2557        kp=`echo "$possible_kernels" | sed s/' '//`
2558        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2559        output="$kp"
2560    else
2561        for i in $possible_kernels ; do
2562            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2563                LogAll "INFO: OK, I used my initiative and found that "
2564                LogAll "INFO: $i is probably your kernel. "
2565                output="$i"
2566                break
2567            fi
2568        done
2569        if [ ! -n "$output" ]; then
2570            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2571                output=/boot/vmlinuz
2572                LogFile "INFO: Schlomo, this one's for you."
2573            else
2574                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2575                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2576                LogFile "INFO: $possible_kernels"
2577                output=""
2578            fi
2579        fi
2580    fi
2581    if [ $KERNEL_IS_XEN = "yes" ]; then
2582        if [ "$noof_xenkernels" -eq "0" ]; then
2583            xenkernelpath=""
2584        elif [ "$noof_xenkernels" -eq "1" ]; then
2585            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2586            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2587        else
2588            for i in $possible_xenkernels ; do
2589                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2590                    LogFile "INFO: OK, I used my initiative and found that "
2591                    LogFile "INFO: $i is probably your Xen kernel. "
2592                    xenkernelpath="$i"
2593                    break
2594                fi
2595            done
2596            if [ ! -n "$xenkernelpath" ]; then
2597                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2598                if [ ! -n "$new_possible_xenkernels" ]; then
2599                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2600                    LogFile "INFO: Using $xenkernelpath"
2601                else
2602                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2603                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2604                    LogFile "INFO: $possible_xenkernels"
2605                    output=""
2606                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2607                    LogFile "INFO: Using $xenkernelpath"
2608                fi
2609            fi
2610        fi
2611        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2612            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2613        fi
2614    fi
2615    #LogAll "TryToFindKernelPath found $output"
2616    echo "$output"
2617}
2618
2619CopyFromConf() {
2620
2621    conf=$1
2622    echo -en "INFO: Gathering dependencies of $conf.conf..."
2623    lis2=`grep -Ev '^#' $DEPLIST_DIR/$conf.conf | sort -u`
2624    noof_lines=`echo $lis2 | wc -w`
2625    progress=0
2626    # Get only the files which exist in that list
2627    # and potentially their symlink structure
2628    # put apart directories for later handling
2629    for f in $lis2; do
2630        if [ -d $f ]; then
2631            for g in `find $f`; do
2632                echo $g >> $MINDI_TMP/$conf.lis
2633                LocateDeps $g  >> $MINDI_TMP/$conf.lis2
2634            done
2635            lis3="$lis3 $f"
2636        else
2637            if [ -r $f ]; then
2638                echo $f >> $MINDI_TMP/$conf.lis
2639                LocateDeps $f >> $MINDI_TMP/$conf.lis2
2640            fi
2641        fi
2642        progress=$(($progress+1))
2643        LogProgress $progress $noof_lines
2644    done
2645    echo -e "$DONE"
2646    echo -en "INFO: Processing all dependencies links..."
2647    # And their deps
2648    lines=`sort -u $MINDI_TMP/$conf.lis $MINDI_TMP/$conf2.lis2`
2649    noof_lines=`echo $lines | wc -w`
2650    progress=0
2651    for f in $lines; do
2652        mr-read-all-link $f >> $MINDI_TMP/$conf.lis
2653        if [ "`echo $f | cut -c1`" = "/" ]; then
2654            j=`echo $f | cut -c2-`
2655            [ "$j" != "" ] && rm -f $mountpoint/$j
2656        fi
2657        progress=$(($progress+1))
2658        LogProgress $progress $noof_line
2659    done
2660    echo -e "$DONE"
2661    finallist=""
2662    # Remove directories from the list, as tar/cp will create them anyway
2663    # and it may hurt if /lib is in it as on Debian/Ubuntu
2664    # recent bash says that -d is true for a link to a dir !
2665    for f in `sort -u $MINDI_TMP/$conf.lis`; do
2666        if [ -e "$f" -a ! -d "$f" ] || [ -h "$f" ]; then
2667            # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2668            if [ ! -e "$mountpoint/$f" ]; then
2669                finallist="$finallist $f"
2670            fi
2671        fi
2672    done
2673    # But adds the directory useful in $lis3
2674    fnllist=`echo $finallist | tr ' ' '\n' | sort -u | tr '\n' ' '`
2675    LogFile "INFO: Copying $conf related files with cp -a --parents $fnllist $lis3 -t $mountpoint/"
2676    cp -a --parents $fnllist $lis3 -t $mountpoint/ 2> $templog  || LogAll "WARNING: Problem in $conf analysis" $templog
2677    rm -f $MINDI_TMP/$conf.lis $MINDI_TMP/$conf.lis2
2678}
2679
2680MakeBootInitFile() {
2681    local tgz_dir_fname rdz_fname tempfile nodes kernelsize res currsize not_copied j k s w needed_modules_path d thelink templog
2682
2683    tgz_dir_fname=$1
2684    rdz_fname=$2
2685    kernelsize=$3
2686    tempfile=$MINDI_TMP/temp.rd
2687    res=0 
2688    templog=$MINDI_TMP/$$.log
2689    > $templog
2690
2691    LogAll "INFO: Making Boot RAM Disk ($ramdisk_size KB)"
2692    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (MakeBootInitFile)"
2693    LogAll "INFO: Creating ext2 filesystem on $tempfile"
2694    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2695    mkdir -p $mountpoint
2696    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2697
2698    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2699    for d in bin sbin lib lib64; do
2700        if [ -h "/$d" ]; then
2701            thelink=`readlink /$d`
2702            mkdir -p $mountpoint/$thelink || LogAll "ERROR: Unable to create $thelink in $mountpoint."
2703            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2704            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2705                rmdir $mountpoint/$d
2706            fi
2707            if [ ! -h $mountpoint/$d ]; then
2708                rm -f $mountpoint/$d 2> /dev/null
2709                (cd $mountpoint ; ln -s $thelink $d) || LogAll "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2710            fi
2711        fi
2712    done
2713
2714    LogFile "INFO: what is now in $mountpoint"
2715    ls -al $mountpoint >> $LOGFILE
2716   
2717    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2718    # copy from rootfs into mountpoint
2719    LogAll "INFO: Copying Mindi files onto $mountpoint"
2720    for f in $tgz_dir_fname/*; do
2721        if [ ! -r $f ]; then
2722            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2723        else
2724            cp -af $f $mountpoint 2>&1 >> $LOGFILE
2725        fi
2726    done
2727    (cd $mountpoint/etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2728    (cd $mountpoint ; ln -sf usr/sbin/init linuxrc)
2729
2730    (cd $mountpoint/dev ; tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz" ; rm -f dev-entries.tgz)
2731
2732    for w in insmod.static insmod.static.old ; do
2733        s=`which $w 2> /dev/null`
2734        if [ -e "$s" ] ; then
2735            tar cf - -C / $s 2> /dev/null | (cd $mountpoint ; tar xf -)
2736        fi
2737    done
2738
2739    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2740   
2741    # Copy of files mandatory for ssh to automate mount if sshfs is used
2742    mkdir -p $mountpoint/.ssh $mountpoint/tmp
2743    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2744    cat > $mountpoint/tmp/myssh << EOF
2745ssh -o StrictHostKeyChecking=no $*
2746EOF
2747    chmod 755 $mountpoint/tmp/myssh
2748
2749    # Copy of files mandatory for ld.so
2750    cp -a /etc/ld.so.c* $mountpoint/etc
2751
2752    # Handle the case where busybox and mount are dynamically linked
2753    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2754    if [ $? -eq 0 ]; then
2755        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2756        rm -f $mountpoint/bin/mount
2757    fi
2758
2759    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf (which includes all busybox deps)
2760    CopyFromConf minimal
2761
2762    # In case target /bin dir still doesn't exist, create it before using it
2763    if [ ! -d $mountpoint/bin ]; then
2764        mkdir -p $mountpoint/bin
2765    fi
2766
2767    # For older distributions expecting /sbin/init provides it
2768    if [ ! -e "$mountpoint/sbin/init" ]; then
2769        (cd $mountpoint/sbin ; ln -sf ../usr/sbin/init .)
2770    fi
2771
2772    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2773    (cd $mountpoint ; ln -sf /bin/bash bin/sh)
2774    LogFile "INFO: Using bash as default shell"
2775
2776    # Avoids an issue on some distro (RHEL5)
2777    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2778
2779    # Management of DRBD
2780    which drbdadm &> /dev/null
2781    if [ $? -eq 0 ]; then
2782        # Do we find DRBD devices setup
2783        drbdadm sh-dev all | grep -E '^/dev' &> /dev/null
2784        if [ $? -eq 0 ]; then
2785            CopyFromConf drbd
2786        fi
2787        # DRBD requires net activation
2788        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS drbd"
2789    fi
2790
2791    # Management of udev (which includes modprobe in rules)
2792    ps auxww | grep -v grep | grep -qw udevd
2793    if [ $? -eq 0 ]; then
2794        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2795        LogFile "INFO: udev device manager found"
2796        tar cf - -C / /etc/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /etc/udev analysis" $templog
2797        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2798        rm -f $mountpoint/etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2799        # Do not do it if it's a link (Ubuntu 64 bits #503)
2800        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2801            tar cf - -C / /lib64/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /lib64/udev analysis" $templog
2802        fi
2803        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2804            tar cf - -C / /lib32/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /lib32/udev analysis" $templog
2805        fi
2806        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2807            tar cf - -C / /lib/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /lib/udev analysis" $templog
2808        fi
2809        if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [  ! -h "/usr/lib/udev" ]; then
2810            tar cf - -C / /usr/lib/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /usr/lib/udev analysis" $templog
2811        fi
2812        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ] || [ -x /lib/systemd/systemd-udevd ]; then
2813            CopyFromConf udev
2814        else
2815            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2816            LogAll "         mindi will use static devices which may cause problems"
2817            rm -f $mountpoint/tmp/USE-UDEV
2818        fi
2819    fi
2820
2821    # Management of potential HW info (ProLiant only at the moment)
2822    rm -rf $MINDI_CACHE/bkphw
2823    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2824    if [ -d $MINDI_CACHE/bkphw ]; then
2825        LogAll "INFO: Hardware Information found and saved ..."
2826        cp -rp $MINDI_CACHE/bkphw $mountpoint
2827        if [ -f $MINDI_CACHE/tools.files ]; then
2828            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2829            LocateDeps $lis > $MINDI_TMP/tools.lis
2830            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog | (cd $mountpoint ; tar xf -) || LogAll "ERROR: Problem in tools.lis analysis" $templog
2831        fi
2832        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2833            mv -f $MINDI_CACHE/mindi-rsthw $mountpoint
2834            chmod 755 $mountpoint/mindi-rsthw
2835        fi
2836        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2837    fi
2838
2839    # Management of perl scripts delivered needed at restore time
2840    LogAll "INFO: Analyzing perl modules dependencies..."
2841    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]*bin/mr-* 2> $templog > $MINDI_TMP/perl.lis || LogAll "ERROR: Problem in mindi-get-perl-modules" $templog
2842    LogFile "DBG4: Perl Modules found:"
2843    LogFile "-------------------------"
2844    cat $MINDI_TMP/perl.lis >> $LOGFILE
2845    LogFile "-------------------------"
2846    tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog | (cd $mountpoint ; tar xf -) || LogAll "ERROR: Problem in perl scripts analysis" $templog
2847
2848    for w in cdrom groovy-stuff ; do
2849        mkdir -p mnt/$w
2850    done
2851
2852    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2> $templog | (cd $mountpoint ; tar xf -) || LogAll "ERROR: Problem in fd dev analysis" $templog
2853
2854    needed_modules=""
2855    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2856
2857    if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2858        # For PXE boot
2859        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2860    fi
2861    for i in $DENY_MODS; do
2862        LogFile "INFO: Removing $i from the list of modules to load"
2863        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2864    done
2865
2866    if [ "${kernelname}" != "" ]; then
2867        needed_modules_path=lib/modules/${kernelname}
2868        mkgmopt="-k ${kernelname}"
2869    else
2870        needed_modules_path=lib/modules/$KERVERRUN
2871        mkgmopt="-k $KERVERRUN"
2872    fi
2873
2874    [ -e "/$needed_modules_path" ] || LogAll "WARNING: path $needed_modules_path does not exist.\n         If you're not using a modular kernel then mindi won't probably work."
2875    LogAll "INFO: Analyzing kernel modules dependencies..."
2876    needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2877
2878    LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2879    cp --parents -aL $needed_modules $mountpoint/ 2> $templog || LogAll "ERROR: Unable to copy modules to $mountpoint" $templog
2880
2881    # Uncompress modules if not using udev and native modprobe
2882    if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2883        for i in $needed_modules; do
2884            if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2885                gunzip -f $mountpoint/$i
2886            fi
2887            if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2888                bunzip2 -f $mountpoint/$i
2889            fi
2890            if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2891                unxz -f $mountpoint/$i
2892            fi
2893            LogFile "INFO: Uncompressing $i"
2894        done
2895    fi
2896
2897    # Also copy modules.* in case of udev so that normal modprobe works
2898    tar cf - -C / /$needed_modules_path/modules.* 2> $templog | (cd "$mountpoint" ; tar xf -) || LogAll "ERROR: Unable to copy modules.* to $mountpoint" $templog
2899
2900    # Copy FW in case some drivers needs it
2901    for d in "/lib" "/usr/lib"; do
2902        if [ -d "$d/firmware" -a ! -h $d ]; then
2903            cp -a "$d/firmware" "$mountpoint/$d"
2904        fi
2905    done
2906
2907    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2908    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2909        if [ -d "$d/multipath" -a ! -h $d ]; then
2910            cp -a "$d/multipath" "$mountpoint/$d"
2911        fi
2912    done
2913
2914    # Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
2915    (cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e "$mountpoint/bin/$i" ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done)
2916
2917    # Copy an additional ProLiant tool for OBDR support
2918    if [ -f $MINDI_TMP/OBDR ]; then
2919        found=0
2920        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2921            mkdir -p $mountpoint/usr/bin
2922            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2923            LogAll "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2924            found=1
2925        fi
2926        if [ -x /usr/bin/sg_wr_mode ]; then
2927            mkdir -p $mountpoint/usr/bin
2928            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2929            LocateDeps $lis > $MINDI_TMP/obdr.lis
2930            tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2> $templog | (cd $mountpoint ; tar xf -) || LogAll "ERROR: Problem in obdr.lis analysis" $templog
2931            LogAll "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2932            found=1
2933        fi
2934        if [ $found -eq 0 ]; then
2935            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2936            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2937        fi
2938    fi
2939
2940    if [ ! -e "/sbin/devfsd" ]; then
2941        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2942        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2943        rm -f $mountpoint/sbin/devfsd
2944    fi
2945    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2946    if [ _"$MONDO_SHARE" != _"" ]; then
2947        MakeMondoConfigFile $mountpoint/tmp/$MRCFG
2948        cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk"
2949        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2950        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2951        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2952    fi
2953
2954    # Create module list to load at restore time
2955    rm -f $mountpoint/tmp/modules
2956    for m in $CDROM_MODS; do
2957        echo $m >> $mountpoint/tmp/modules
2958    done
2959
2960    mkdir -p $mountpoint/proc
2961    LogFile "---------------------------"
2962    LogFile "Size of initial ramdisk:"
2963    LogFile "---------------------------"
2964    (cd "$mountpoint" ; du -sh .) >> $LOGFILE
2965    LogFile "---------------------------"
2966    LogFile "Content of initial ramdisk:"
2967    LogFile "---------------------------"
2968    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2969    LogFile "---------------------------"
2970
2971    # Determine what filesystem to use for initrd image
2972    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2973    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2974    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2975    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2976        # say what will be used
2977        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2978        # kernel expects linuxrc in ext2 filesystem
2979        (cd "$mountpoint" && ln -sf usr/sbin/init linuxrc)
2980        # unmount loop filesystem and create image file using the standard approach
2981        sync
2982        umount $mountpoint || Die "Cannot unmount $tempfile"
2983        dd if=$tempfile bs=1k of=${rdz_fname}.tmp > /dev/null 2> /dev/null
2984        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2985            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2986        else
2987            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2988        fi
2989        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2990        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2991        rm -f ${rdz_fname}.tmp
2992        # log that we are done
2993    elif [ "$gvFileSystem" = "initramfs" ]; then
2994        # say what will be used
2995        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2996        # make sure that cpio is there
2997        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2998        # kernel expects init in cpio filesystem
2999        (cd "$mountpoint" ; ln -sf usr/sbin/init init)
3000        # create cpio image file and unmount loop filesystem
3001        (cd "$mountpoint" ; find . -print | cpio -o -H newc 2> /dev/null | gzip -9 > $rdz_fname)
3002        sync
3003        umount $mountpoint || Die "Cannot unmount $tempfile"
3004        # log that we are done
3005    else
3006        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
3007    fi
3008
3009    if [ "$res" -eq "0" ] ; then
3010        LogAll "INFO: MakeBootInitFile finished without error."
3011    else
3012        LogAll "WARNING: MakeBootInitFile exits WITH ERRORS."
3013    fi
3014    return 0
3015}
3016
3017
3018##############################################################################
3019#----------------------------------- Main -----------------------------------#
3020##############################################################################
3021
3022# Now we can create what we need
3023mkdir -p $MINDI_TMP
3024
3025# --nolog needs to be first, and is used in analyze-my-lvm
3026if [ "$1" = "--nolog" ] ; then
3027    shift
3028    LOGFILE=/dev/stderr
3029else
3030    > $LOGFILE
3031fi
3032if [ "$1" = "--printvar" ] ; then
3033    shift
3034    if [ _"$1" != _"" ] ; then
3035        set | grep -Ew "^$1" | cut -d= -f2
3036    fi
3037    exit 0
3038fi
3039
3040LogFile "mindi v$MINDI_VERSION"
3041LogFile "-----------------------------"
3042LogFile "Start date : `date`"
3043LogFile "-----------------------------"
3044LogFile "$ARCH architecture detected"
3045LogFile "mindi called with the following arguments:"
3046echo "$@">> $LOGFILE
3047LogFile "-----------------------------"
3048pbdistrocheck --version | grep Version >> $LOGFILE
3049LogFile "pbdistrocheck results:"
3050pbdistrocheck >> $LOGFILE
3051LogFile "-----------------------------"
3052LogFile "MondoRescue perl module:"
3053mr-getparam --version | grep Version >> $LOGFILE
3054LogFile "-----------------------------"
3055
3056# Log some capital variables
3057[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
3058[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
3059LogFile "MONDO_SHARE = $MONDO_SHARE"
3060LogFile "MINDI_LIB = $MINDI_LIB"
3061LogFile "MINDI_SBIN = $MINDI_SBIN"
3062LogFile "MINDI_CONF = $MINDI_CONF"
3063# Purge from potential old run
3064if [ _"$MINDI_CACHE" = _"" ]; then
3065    Die "MINDI_CACHE undefined"
3066else
3067    LogFile "MINDI_CACHE = $MINDI_CACHE"
3068fi
3069
3070if [ -f $MINDI_CONFIG ]; then
3071    LogFile "-----------------------------"
3072    LogFile " Mindi configuration file    "
3073    LogFile "-----------------------------"
3074    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
3075    LogFile "-----------------------------"
3076fi
3077LogFile "In Mindi"
3078LogFile "--------"
3079LogFile "EXTRA_SPACE = $EXTRA_SPACE"
3080LogFile "--------"
3081
3082trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
3083
3084# Sanity checks
3085which which > /dev/null 2> /dev/null || Die "Please install 'which'."
3086which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
3087which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
3088which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
3089if which awk &> /dev/null ; then
3090    if ! which gawk &> /dev/null ; then
3091        LogAll "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
3092    fi
3093fi
3094which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
3095[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
3096
3097[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
3098
3099# Update the PATH variable if incomplete
3100if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
3101    PATH=$PATH:/sbin:/usr/sbin
3102    export PATH
3103    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
3104    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
3105    LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
3106fi
3107
3108if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
3109    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
3110fi
3111
3112### TODO
3113### Fix as it's not mandatory on ia64
3114if [ "$ARCH" = "ia64" ] ; then
3115    if which elilo &> /dev/null ; then
3116        LILO_EXE=elilo
3117    else
3118        LILO_EXE=`which false 2> /dev/null`
3119    fi
3120else
3121    FindIsolinuxBinary
3122fi
3123trap "Aborted" SIGTERM
3124DONE="\r\t\t\t\t\t\t\t\tDone.         "
3125kernelpath=""
3126MONDO_ROOT=/var/cache/mondo
3127mkdir -p $MONDO_ROOT
3128
3129if [ -d "/proc/lvm" ]; then
3130    # LVM v1
3131    LVMCMD=""
3132    LVM="v1"
3133elif [ -d "/dev/mapper" ]; then
3134    # LVM v2
3135    LVMCMD="lvm"
3136    LVM="v2"
3137else
3138    LVM="false"
3139fi
3140
3141if [ -e "/proc/cmdline" ]; then
3142    CMDLINE="/proc/cmdline"
3143elif [ -e "/tmp/cmdline" ]; then
3144    CMDLINE="/tmp/cmdline"
3145else
3146    CMDLINE="/dev/null"
3147fi
3148
3149LogFile "INFO: LVM set to $LVM"
3150LogFile "----------"
3151LogFile "mount result:"
3152LogFile "-------------"
3153mount >> $LOGFILE
3154if [ -e "/etc/raidtab" ]; then
3155    LogFile "-------------"
3156    LogFile "/etc/raidtab content:"
3157    LogFile "-------------"
3158    cat /etc/raidtab >> $LOGFILE
3159else
3160    LogFile "No file /etc/raidtab"
3161fi
3162if [ -e "/etc/mdadm.conf" ]; then
3163    LogFile "-------------"
3164    LogFile "/etc/mdadm.conf content:"
3165    LogFile "-------------"
3166    cat /etc/mdadm.conf >> $LOGFILE
3167else
3168    LogFile "-------------"
3169    LogFile "No file /etc/mdadm.conf"
3170fi
3171LogFile "-------------"
3172LogFile "cat $CMDLINE"
3173LogFile "-------------"
3174cat $CMDLINE >> $LOGFILE
3175LogFile "-------------"
3176LogFile "cat /proc/swaps:"
3177LogFile "-------------"
3178cat /proc/swaps >> $LOGFILE
3179LogFile "-------------"
3180if [ -e "/proc/mdstat" ]; then
3181    LogFile "cat /proc/mdstat:"
3182    LogFile "-------------"
3183    cat /proc/mdstat >> $LOGFILE
3184else
3185    LogFile "No pseudo file /proc/mdstat"
3186fi
3187LogFile "-------------"
3188LogFile "cat /proc/partitions:"
3189LogFile "-------------"
3190cat /proc/partitions >> $LOGFILE
3191LogFile "-------------"
3192LogFile "cat /proc/filesystems:"
3193LogFile "-------------"
3194cat /proc/filesystems >> $LOGFILE
3195LogFile "-------------"
3196LogFile "lsmod result:"
3197LogFile "-------------"
3198lsmod >> $LOGFILE
3199MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3200if [ -x /usr/sbin/esxcfg-module ]; then
3201    LogFile "-------------"
3202    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3203    LogFile "-------------"
3204    LogFile "VMWare modules"
3205    LogFile "-------------"
3206    /usr/sbin/esxcfg-module -l >> $LOGFILE
3207    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3208fi
3209LogFile "-------------" 
3210LogFile "FORCE_MODS:"
3211LogFile "-------------"
3212LogFile "$FORCE_MODS"
3213LogFile "-------------"
3214LogFile "DENY_MODS:"
3215LogFile "-------------"
3216LogFile "$DENY_MODS"
3217LogFile "-------------"
3218LogFile "df result:"
3219LogFile "----------"
3220df -aT >> $LOGFILE
3221LogFile "-------------"
3222LogFile "df -i result:"
3223LogFile "----------"
3224df -i >> $LOGFILE
3225LogFile "-------------"
3226if [ -r /boot/grub/menu.lst ]; then
3227    LogFile "-------------"
3228    LogFile "INFO: /boot/grub/menu.lst content"
3229    LogFile "-------------"
3230    cat /boot/grub/menu.lst >> $LOGFILE
3231    LogFile "-------------"
3232fi
3233if [ -r /boot/grub/grub.conf ]; then
3234    LogFile "-------------"
3235    LogFile "INFO: /boot/grub/grub.conf content"
3236    LogFile "-------------"
3237    cat /boot/grub/grub.conf >> $LOGFILE
3238    LogFile "-------------"
3239fi
3240if [ -r /boot/grub/grub.cfg ]; then
3241    LogFile "-------------"
3242    LogFile "INFO: /boot/grub/grub.cfg content"
3243    LogFile "-------------"
3244    cat /boot/grub/grub.cfg >> $LOGFILE
3245    LogFile "-------------"
3246fi
3247if [ -r /boot/grub/device.map ]; then
3248    LogFile "-------------"
3249    LogFile "INFO: /boot/grub/device.map content"
3250    LogFile "-------------"
3251    cat /boot/grub/device.map >> $LOGFILE
3252    LogFile "-------------"
3253fi
3254if [ -r /boot/grub2/device.map ]; then
3255    LogFile "-------------"
3256    LogFile "INFO: /boot/grub2/device.map content"
3257    LogFile "-------------"
3258    cat /boot/grub2/device.map >> $LOGFILE
3259    LogFile "-------------"
3260fi
3261if [ -r /etc/lilo.conf ]; then
3262    LogFile "-------------"
3263    LogFile "INFO: /etc/lilo.conf content"
3264    LogFile "-------------"
3265    cat /etc/lilo.conf >> $LOGFILE
3266fi
3267if [ -d /boot/efi ]; then
3268    gcf=`find /boot/efi -name 'grub.c*'`
3269    if [ _"$gcf" = _"" ]; then
3270        LogFile "Found a /boot/efi directory without a grub config file in it"
3271    else
3272        LogFile "-------------"
3273        LogFile "INFO: $gcf content"
3274        LogFile "-------------"
3275        cat $gcf >> $LOGFILE
3276        LogFile "-------------"
3277    fi
3278fi
3279
3280LogFile "Full fdisk info"
3281LogFile "---------------"
3282$FDISK -l >> $LOGFILE
3283LogFile "----------------"
3284
3285# Compute libata version
3286laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3287# If libata v2 is used then remove ide-generic as it will perturbate boot
3288if [ "`echo $MODULES | grep libata`" ]; then
3289    if [ "$laver" = "2" ]; then
3290        DENY_MODS="$DENY_MODS ide-generic"
3291        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3292        LogFile "-------------"
3293    fi
3294fi
3295
3296# Check for McAfee which disturbs the access to some files (tgz in articular)
3297if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3298    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3299    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3300    LogFile "WARNING: You have two options:"
3301    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3302    LogFile "WARNING:  - Disable the scanner during the backup"
3303fi
3304
3305#
3306# If we have a USB device we need to store info
3307# and remove it from the parameters line
3308#
3309if [ "$#" -ne "0" ] ; then
3310    if [ "$1" = "--usb" ] ; then
3311        shift
3312        USBDEVICE=$1
3313        if [ _"$USBDEVICE" = _"" ]; then
3314            Die "No USB device specified"
3315        fi
3316        shift
3317    fi
3318fi
3319
3320if [ "$#" -ne "0" ] ; then
3321    if [ "$1" = "--findkernel" ] ; then
3322        resk=`TryToFindKernelPath`
3323        # Avoids logfile content for mondo
3324        export MONDO_SHARE=""
3325        if [ "$resk" = "" ] ; then
3326            if [ $KERNEL_IS_XEN = "yes" ]; then
3327                echo "$xenkernelpath"
3328                LogFile "INFO: xenkernelpath = $xenkernelpath"
3329                MindiExit 0
3330            else
3331                MindiExit -1
3332            fi
3333        else
3334            echo "$resk"
3335            LogFile "INFO: kernelpath = $resk"
3336            MindiExit 0
3337        fi
3338    elif [ "$1" = "--locatedeps" ] ; then
3339        [ ! "$2" ] && Die "Please specify the binary to look at"
3340        LocateDeps $*
3341        # Avoids logfile content for mondo
3342        export MONDO_SHARE=""
3343        MindiExit $?
3344    elif [ "$1" = "--readalllink" ] ; then
3345        [ ! "$2" ] && Die "Please specify the binary to look at"
3346        # Avoids logfile content for mondo
3347        export MONDO_SHARE=""
3348        mr-read-all-link $2
3349        MindiExit $?
3350    elif [ "$1" = "--makebcf" ] ; then
3351        [ ! "$2" ] && Die "Please specify the boot loader to check (syslinux, grub, grub2)"
3352        MakeBootConfFile $2
3353        MindiExit 0
3354    elif [ "$1" = "--makemessage" ] ; then
3355        MakeMessageFile | cut -c1-80
3356        MindiExit 0
3357    elif [ "$1" = "--makemountlist" ] ; then
3358        [ ! "$2" ] && Die "Please specify the output file"
3359        MakeMountlist $2
3360        CheckMountlist $2
3361        # Avoids logfile content for mondo
3362        export MONDO_SHARE=""
3363        MindiExit $?
3364    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3365        echo "Mindi v$MINDI_VERSION"
3366        # Avoids logfile content for mondo
3367        export MONDO_SHARE=""
3368        MindiExit 0
3369    elif [ "$1" = "--ironic" ] ; then
3370        [ ! "$2" ] && [ ! -f "$2" ] && Die "Please specify the kernel to use"
3371        [ ! "$3" ] && [ ! -f "$3" ] && Die "Please specify the initramfs to use"
3372        [ "$4" ] && [ "$4" != "UEFI" ] && [ "$4" != "BIOS" ] && Die "Please specify the boot mode as BIOS or UEFI"
3373        #TODO: See how we can influence the boot loader
3374        [ "$5" ] && [ "$5" != "isolinux" ] && [ "$5" != "grub" ] && [ "$5" != "grub2" ] && Die "Please specify the boot loader as isolinux or grub or grub2"
3375        if [ "$5" ]; then
3376            boottype=$5
3377        fi
3378        [ "$6" ] && [ ! -e "$6" ] && Die "Please specify an existing boot loader path for $boottype"
3379        if [ "$6" ]; then
3380            bootbin=$6
3381        fi
3382        kernelpath=$2
3383        BOOT_TYPE=$4
3384        bigdir=$MINDI_TMP/bigdir
3385        # Ironic requires some specific boot parameters
3386        MINDI_ADDITIONAL_BOOT_PARAMS="selinux=0 barrier=off udevtimeout=10 systemd.debug-shell boot_method=vmedia"
3387        MINDI_BOOT_TIMEOUT=10
3388        EXTRA_SPACE=1500000
3389        # Get the local improvements to the configuration
3390        if [ -f $MINDI_CONFIG ]; then
3391            . $MINDI_CONFIG
3392        fi
3393        PrepareBootDir
3394        PrepareAllTar
3395        cp $3 $MINDI_TMP/initrd.img
3396        MakeBootableDevice ISO
3397        MindiExit 0
3398    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3399        MONDO_TMP=$2
3400        # Change MINDI_TMP for the one provided by mondo
3401        # So that it can get back the built files
3402        if [ _"$MONDO_TMP" = _"" ]; then
3403            Die "MONDO_TMP is empty, aborting"
3404        fi
3405        if [ _"$MONDO_TMP" = _"/" ]; then
3406            Die "MONDO_TMP is /, aborting"
3407        fi
3408        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3409        rmdir $MINDI_TMP
3410        export MINDI_TMP=$MONDO_TMP
3411        mkdir -p $MINDI_TMP
3412
3413        # This is the scratch dir in mondo - subdir images
3414        MINDI_CACHE=$3
3415        LogFile "MINDI_CACHE = $MINDI_CACHE"
3416
3417        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3418        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3419       
3420###
3421### Sq-Modification...
3422### Attempt to locate kernel specific module path
3423### if module path is found then use it other wise use uname -r to set it...
3424###
3425        if [ $KERNEL_IS_XEN = "yes" ]; then
3426            LogAll "INFO: xenkernelpath = $xenkernelpath"
3427        fi
3428        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3429        if [ ! -d "/lib/modules/$kernelname" ]; then
3430           LogAll "WARNING: Module path for ${kernelpath} not found..."
3431           LogAll "         using running kernel\'s modules."
3432           kernelname=$KERVERRUN
3433        else
3434           LogAll "INFO: Using modules for kernel: ${kernelname}"
3435        fi
3436        LogAll "INFO: kernelname = $kernelname"
3437        LogAll "INFO: kernelpath = $kernelpath"
3438###
3439### end of Sq-Modification
3440###
3441        TAPEDEV=$5
3442        TAPESIZE=$6
3443        FILES_IN_FILELIST=$7
3444        USE_LZO=$8
3445        CDRECOVERY=$9
3446        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3447            IMAGE_DEVS=""
3448        else
3449            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3450        fi
3451        if [ "${11}" ] ; then
3452            LILO_OPTIONS=""
3453    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3454        fi
3455        LAST_FILELIST_NUMBER=${12}
3456        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3457        export MINDI_EXCLUDE_DEVS="${14}"
3458        USE_COMP="${15}"
3459        USE_LILO="${16}"
3460        USE_STAR="${17}"
3461        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3462        DIFFERENTIAL="${19}"
3463        USE_GZIP="${20}"
3464        USE_LZMA="${21}"
3465        NOT_BOOT="${22}"
3466        BOOT_TYPE="${23}"
3467        [ "$USE_COMP" = "" ] && USE_COMP=yes
3468        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3469        [ "$USE_LZMA" = "" ] && USE_LZMA=no
3470        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3471        [ "$TAPEDEV" ] && LogAll "INFO: This is a tape-based backup. Fine."
3472        # MONDO_ROOT is the real scratchdir
3473        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3474        if [ _"$MONDO_ROOT" != _"" ]; then
3475            mkdir -p $MONDO_ROOT
3476        else
3477            Die "MONDO_ROOT is undefined"
3478        fi
3479    else
3480        LogScreen "Syntax: mindi [--custom ....MondoRescue parameters...]"
3481        LogScreen "        mindi --ironic kernel initrd [BIOS|UEFI] [syslinux|grub|grub2] [/path/to/bootloader]"
3482        LogScreen "        mindi --locatedeps file"
3483        LogScreen "        mindi --makemessage"
3484        LogScreen "        mindi --findkernel"
3485        LogScreen "        mindi --makemountlist file"
3486        LogScreen "        mindi --makebcf bootloader"
3487        LogScreen "        mindi -V"
3488        MindiExit -1
3489    fi
3490fi
3491
3492if [ _"$MINDI_CACHE" != _"" ]; then
3493    rm -rf $MINDI_CACHE/* 2> /dev/null
3494    mkdir -p $MINDI_CACHE
3495fi
3496
3497[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3498
3499if [ _"$MONDO_SHARE" = _"" ]; then
3500    LogAll "Mindi Linux mini-distro generator v$MINDI_VERSION"
3501    LogAll "Latest Mindi is available from http://www.mondorescue.org"
3502    LogAll "BusyBox sources are available from http://www.busybox.net"
3503    LogAll "------------------------------------------------------------------------------"
3504else
3505    LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
3506fi
3507if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3508    LogAll "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3509else
3510    LogAll "ERROR: Unable to find mindi-busybox, please install it"
3511    MindiExit -1
3512fi
3513
3514for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3515    modinfo $i 2> /dev/null 1> /dev/null
3516    if [ $? -eq 0 ]; then
3517        modprobe $i 2>&1 > /dev/null
3518    fi
3519done
3520
3521LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3522LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3523LogFile "NOT_BOOT = '$NOT_BOOT'"
3524if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3525    LogAll "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
3526    MakeMondoConfigFile $MINDI_TMP/$MRCFG
3527    MakeMountlist $MINDI_TMP/mountlist.txt
3528    CheckMountlist $MINDI_TMP/mountlist.txt
3529    mkdir -p $MINDI_TMP/small-all/tmp
3530    cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} $MINDI_TMP/small-all/tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3531    (cd $MINDI_TMP/small-all ; tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log)
3532    sleep 2
3533    LogAll "Done. Exiting."
3534    MindiExit 0
3535fi
3536
3537if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3538    LogAll "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3539fi
3540
3541if [ "$kernelpath" = "" ] ; then
3542    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3543    echo -en "\nDo you want to use your own kernel to build the boot disk ([y]/n) ?"
3544    read ch
3545    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3546        USE_OWN_KERNEL="yes"
3547    else
3548        USE_OWN_KERNEL="no"
3549    fi
3550    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3551        kernelpath=`TryToFindKernelPath`
3552        if [ "$kernelpath" = "" ] ; then
3553            echo -n "Please enter kernel path : "
3554            read kernelpath
3555        fi
3556    fi
3557fi
3558
3559echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3560[ "$(($RANDOM%64))" -eq "0" ] && LogAll "INFO: Dude, I've looked inside your computer and it's really dusty..."
3561
3562mountpoint=$MINDI_TMP/mountpoint.$$
3563PrepareDataDiskImages
3564
3565MakeBootInitFile $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not create initrd.img"
3566
3567[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3568...Or type 'memtest' to test your machine's RAM thoroughly.\n"
3569
3570if [ _"$MONDO_SHARE" = _"" ]; then
3571    OfferToMakeBootableISO
3572    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3573        OfferToMakeBootableUSB
3574    fi
3575    LogAll "INFO: Mindi Finished"
3576elif [ "$TAPEDEV" ] ; then
3577    if [ "$ARCH" != "ia64" ] ; then
3578        # We need to keep the img file as boot file for ia64 platform
3579        rm -f $MINDI_CACHE/{*img,*iso}
3580    else
3581        rm -f $MINDI_CACHE/*iso
3582    fi
3583    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3584        OfferToMakeBootableUSB
3585    fi
3586    OfferToMakeBootableISO
3587    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3588        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3589    else
3590        Die "Cannot find all.tar.gz, to be written to tape"
3591    fi
3592elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3593    OfferToMakeBootableUSB
3594else
3595    OfferToMakeBootableISO
3596fi
3597
3598if [ -f $MINDI_TMP/$MRCFG ]; then
3599    LogFile "INFO: Your $MRCFG file is:"
3600    LogFile "--------------------------"
3601    cat $MINDI_TMP/$MRCFG >> $LOGFILE
3602    LogFile "--------------------------"
3603else
3604    if [ _"$MONDO_SHARE" != _"" ] ; then
3605        LogAll "ERROR: You don't have a $MRCFG file !"
3606    fi
3607fi
3608# cleanup
3609MindiExit 0
Note: See TracBrowser for help on using the repository browser.