Context Navigation

← Previous Revision
Next Revision →
Normal
Revision Log

mindi

Visit:

Last change on this file was 3889, checked in by Bruno Cornec, 6 weeks ago
Remove EFI references for ia64
Property svn:executable set to ``* Property svn:keywords set to `Rev Id`
File size: 130.6 KB

Rev	Line
[747]	1	#!/bin/bash
	2
	3	# $Id: mindi 3889 2024-03-10 19:22:38Z bruno $
	4	#
	5	#-----------------------------------------------------------------------------
	6	# mindi - mini-Linux distro based on the user's filesystem & distribution
	7	#
[1880]	8	# Mindi can create a multi-image boot/root kit. The first image is the boot
[747]	9	# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
	10	# the third disk is data disk #2; and so it goes.
	11	#
	12	# See http://www.mondorescue.org for details.
	13	#-----------------------------------------------------------------------------
	14
[3887]	15	### Which arch are we on
[1565]	16	ARCH=`/bin/uname -m`
[2292]	17	KERVERRUN=`/bin/uname -r`
	18	# By default we use the running kernel as a reference
	19	KERVER=$KERVERRUN
[747]	20
[2442]	21	# In case of problem with udev you can try to add udevdebug
[2564]	22	MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
[3053]	23	MINDI_DEFAULT_BOOT_OPTION="interactive"
	24	# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
	25	# So this parameter only applies to non CD recovery.
	26	MINDI_BOOT_TIMEOUT="300"
[747]	27
[1691]	28	MINDI_REV=PBREV
	29	MINDI_VER=PBVER
[747]	30
	31	MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
	32	MINDI_PREFIX=XXX
	33	MINDI_CONF=YYY
	34	MINDI_SBIN=${MINDI_PREFIX}/sbin
[934]	35	MINDI_LIB=LLL
[3149]	36	MINDI_CACHE=/var/cache/mindi
[747]	37
[3278]	38	MRCFG=mondorestore.cfg
	39
[925]	40	# Temporary directory for mindi
[3499]	41	TMPDIR=${TMPDIR:=/tmp}
	42	if [ ! -d $TMPDIR ]; then
	43	mkdir -p $TMPDIR
	44	fi
[925]	45
[3692]	46	EXTRA_SPACE=20000 # increase if you run out of ramdisk space - Default 20 MB
[747]	47
	48	PROMPT_MAKE_CD_IMAGE="yes"
	49	# Ask if you want to make a CD Image to be written?
[3522]	50	# if this is set to 'no' in the conf file, then the image will be created automatically
[747]	51
[1684]	52	PROMPT_MAKE_USB_IMAGE="yes"
	53	# Ask if you want to make a USB Image to be written?
[3522]	54	# if this is set to 'no' in the conf file, then the image will be created automatically
[1684]	55
[966]	56	USE_OWN_KERNEL="yes"
[747]	57	# If set to "no", you will be prompted for whether or not
	58	# you want to use your own kernel, or the supplied default.
	59	# If "yes" mindi will automatically use your own kernel.
[925]	60
[2629]	61	KERNEL_IS_XEN="no"
	62	# If set to "no", the kernel is not a Xen kernel
	63	# If "yes", mindi will modify isolinux.cfg for the Xen kernel.
[2880]	64	xenkernelpath=""
[3766]	65
[747]	66	MY_FSTAB=/etc/fstab
	67	TAPE_MODS="ht st osst ide-tape ide_tape"
[3693]	68	SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa hpdsa smartpqi dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
[747]	69
	70	# ide-probe-mod
[3774]	71	IDE_MODS="ide ide-floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc raid0 raid1 raid456 drbd nvme"
[747]	72	PCMCIA_MODS="pcmcia_core ds yenta_socket"
[3713]	73	USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic hid_microsoft hid-microsoft uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd xhci-pci usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial cdc_eem"
[3714]	74	NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb i40e dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
[3767]	75	CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 nls_cp437 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash dm-thin-pool multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs ntfs nls_utf8 nls_ascii"
[1230]	76	# Replace with that line for HP OCMP e.g.
[2073]	77	#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
[3055]	78	DENY_MODS="kqemu vxfen"
[1399]	79	# Force some modules to be included
[1354]	80	FORCE_MODS=""
[925]	81
[747]	82	LOGFILE=/var/log/mindi.log
	83	BOOT_MEDIA_MESSAGE="\
[3173]	84	To format and restore all files automatically, type '0enuke07' <enter>.\n\
	85	To restore some/all files interactively, type '0einteractive07' <enter>.\n\
	86	To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
	87	To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
	88	\n\
	89	You may add one or more parameters as well as per the function keys below\n\
	90	e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
	91	\n\
	92	If restoring from a local external disk or USB key, do not connect it \n\
	93	until the boot-up has finished.\n\
	94	\n\
	95	\n0eF107-Main \| Boot Parameters 0eF207-1/2 \| 0eF307-2/2 \| 0eF407-PXE\n\
[747]	96	"
[3377]	97	FDISK=$MINDI_SBIN/mr-parted2fdisk
[747]	98
[925]	99	# Using a config file allow to overwrite some values
	100	MINDI_CONFIG="$MINDI_CONF/mindi.conf"
	101	if [ -f $MINDI_CONFIG ]; then
	102	. $MINDI_CONFIG
	103	fi
[1885]	104	DEPLIST_FILE="$MINDI_CONF/deplist.txt"
[2409]	105	DEPLIST_DIR="$MINDI_CONF/deplist.d"
	106
[3502]	107	# Debian 8 system e.g. use xorriso for UEFI support.
	108	# However, they use exactly the same command line parameters as mkisofs, so just
	109	# use it if it's available.
	110	ISO_CMD="/usr/bin/xorriso"
	111
	112	# Mandriva system e.g. use cdrkit, which uses genisoimage.
	113	# However, they use exactly the same command line parameters as mkisofs, so just
	114	# use it if it's available.
	115	if [ ! -x $ISO_CMD ]; then
[3505]	116	ISO_CMD="/usr/bin/genisoimage"
[3515]	117	# For compatibility with previous versions default to mkisofs
	118	if [ ! -x $ISO_CMD ]; then
	119	ISO_CMD="/usr/bin/mkisofs"
	120	fi
	121	if [ ! -x $ISO_CMD ]; then
	122	LogFile "NOTE: No CD image (ISO file) utility found"
	123	ISO_CMD = ""
	124	fi
	125	else
	126	ISO_CMD="/usr/bin/xorriso -as mkisofs"
[3502]	127	fi
	128
[3596]	129	ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi -V MindiCD -o $MINDI_CACHE/mindi.iso "
[925]	130
[3421]	131	# Mindi set this as default in case it's invoked alone
	132	BOOT_TYPE="BIOS"
	133	# and we also check whether we're UEFI or not.
	134	if [ -d "/sys/firmware/efi" ]; then
	135	BOOT_TYPE="UEFI"
	136	fi
[3403]	137
[3746]	138	# Find MBR file in case of bootable USB device to build and for restoring it
	139	MBRFILE=/usr/lib/syslinux/mbr.bin
	140	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
	141	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
	142	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
	143	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
[3768]	144	# Debian 10
	145	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib/SYSLINUX/mbr.bin
	146	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib/syslinux/mbr/mbr.bin
[3746]	147
	148	# Find GPTMBR in case of bootable USB device to build and for restoring it
	149	GPTMBRFILE=/usr/lib/syslinux/gptmbr.bin
	150	[ ! -r "$GPTMBRFILE" ] && GPTMBRFILE=/usr/lib64/syslinux/gptmbr.bin
	151	[ ! -r "$GPTMBRFILE" ] && GPTMBRFILE=/usr/share/syslinux/gptmbr.bin
	152	[ ! -r "$GPTMBRFILE" ] && GPTMBRFILE=/usr/share/lib/syslinux/gptmbr.bin
	153	[ ! -r "$GPTMBRFILE" ] && GPTMBRFILE=/usr/share/lib64/syslinux/gptmbr.bin
[3768]	154	# Debian 10
	155	[ ! -r "$GPTMBRFILE" ] && GPTMBRFILE=/usr/lib/SYSLINUX/gptmbr.bin
	156	[ ! -r "$GPTMBRFILE" ] && GPTMBRFILE=/usr/lib/syslinux/mbr/gptmbr.bin
[3746]	157
[2880]	158	# Function to log on screen only
	159	LogScreen() {
[3368]	160	if [ -e /dev/stderr ] ; then
	161	echo -e "$1" >> /dev/stderr
	162	elif [ -e /usr/bin/logger ] ; then
	163	/usr/bin/logger -s $1
	164	fi
[2880]	165	}
[2685]	166
[2880]	167	# Function to log in log file only
	168	LogFile() {
	169
[3368]	170	echo -e "$1" >> $LOGFILE
	171	if [ _"$2" != _"" ]; then
[3403]	172	grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
[3432]	173	rm -f "$2"
[3368]	174	fi
[2880]	175	}
	176
	177	# Function to log in both screen and logfile
	178	LogAll() {
[3368]	179	LogScreen "$1"
	180	LogFile "$1" "$2"
[2880]	181	}
	182
[2963]	183	# Last function called before exiting
	184	# Parameter is exit code value
	185	# Should be declared here as used immediately below potentialy
	186	MindiExit() {
[3766]	187	LogFile "INFO: Mindi $MINDI_VERSION is exiting"
	188	LogFile "INFO: End date : `date`"
[2963]	189	if [ _"$MONDO_SHARE" != _"" ] ; then
	190	echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
[2995]	191	if [ -f $LOGFILE ]; then
	192	cat $LOGFILE >> /var/log/mondoarchive.log
	193	else
	194	echo "No LOGFILE available in that mindi run" >> /var/log/mondoarchive.log
	195	fi
[2963]	196	echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
	197	fi
[2880]	198
[2963]	199	cd /
	200	sync&
	201
	202	# Clean temporary files only when standalone mindi
	203	if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
	204	rm -Rf $MINDI_TMP
	205	fi
	206	exit $1
	207	}
	208
[2685]	209	Die() {
	210	if [ "$1" = "" ] ; then
[3149]	211	LogAll "FATAL ERROR"
[2685]	212	else
[3149]	213	LogAll "FATAL ERROR. $1"
[2685]	214	fi
	215	if [ _"$2" != _"" ]; then
[3403]	216	grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
[2685]	217	fi
	218	rm -f "$2"
	219
[3149]	220	LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
	221	LogAll "See http://www.mondorescue.org for more information."
	222	LogAll "WE CANNOT HELP unless you enclose that file.\n"
[2685]	223	MindiExit -1
	224	}
	225
[1485]	226	# Now we can create what we need
[2150]	227	MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
	228	if [ $? -ne 0 ]; then
	229	df $TMPDIR
	230	Die "Unable to create a temporary directory ! Check space on $TMPDIR"
	231	fi
[2153]	232	if [ _"$MINDI_TMP" = _"" ]; then
	233	Die "MINDI_TMP is empty, aborting"
	234	fi
	235	if [ _"$MINDI_TMP" = _"/" ]; then
	236	Die "MINDI_TMP is /, aborting"
	237	fi
[2150]	238	export MINDI_TMP
[940]	239
[747]	240	# ----------------------------------------------------------------------------
	241
	242
	243	AbortHere() {
	244	Die "Program is terminating in response to signal received from OS/user"
	245	}
	246
	247
	248	Aborted() {
	249	trap SIGHUP SIGTERM SIGTRAP SIGINT
[1880]	250	[ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindiimg $MINDI_CACHE/gz $MINDI_CACHE/mindi.iso
[747]	251	Die "User abort."
	252	}
	253
	254
	255	AddFileToCfgIfExists() {
	256	[ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
	257	}
	258
	259
	260	AddKeyboardMappingFile() {
	261	local mappath r included_list included_item i res ii sss
	262	mappath=$1
	263	KBDEPTH=$(($KBDEPTH+1))
	264	[ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
	265	if [ -e "$bigdir/$mappath" ] ; then
[3149]	266	LogFile "INFO: $mappath already added"
[747]	267	return
	268	elif [ -d "$bigdir/$mappath" ] ; then
	269	echo "Cannot add $mappath: it's a directory. Sorry."
	270	return
	271	fi
[3149]	272	LogFile "INFO: Added kbd map $mappath"
[747]	273	if [ ! -e "$mappath" ] ; then
[3149]	274	mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[747]	275	if [ ! -e "$mappath" ] ; then
[3149]	276	LogAll "WARNING: Cannot add $mappath: kbd map file not found"
[747]	277	return
	278	fi
	279	fi
	280
[3149]	281	tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log \| (cd "$bigdir" ; tar xf -) \|\| LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
[747]	282	if [ "`echo $mappath \| grep -F ".gz"`" ] ; then
[3023]	283	included_list=`gzip -dc $mappath \| grep -Fi include \| sed s/'"'//g \| cut -d' ' -f2`
[747]	284	else
[3023]	285	included_list=`grep -Fi include $mappath \| sed s/'"'//g \| cut -d' ' -f2`
[747]	286	fi
	287	for included_item in $included_list ; do
[925]	288	if [ ! -e "$included_item" ] ; then
[3149]	289	sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
[1764]	290	[ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
[925]	291	for ii in $sss ; do
[3546]	292	[ -e "$ii" ] && AddKeyboardMappingFile $ii
[925]	293	done
	294	else
	295	AddKeyboardMappingFile $included_item
	296	fi
[747]	297	done
	298	}
	299
	300
	301	CopyDependenciesToDirectory() {
[3403]	302	local outdir incoming counter d found tdir templog
[747]	303	outdir=$1
[3403]	304	templog=$MINDI_TMP/$$.log
[747]	305	mkdir -p $outdir
	306	incoming=`ReadLine`
[3887]	307	counter=$3
[3403]	308	> $templog
	309
[747]	310	while [ "$incoming" != "" ] ; do
[3887]	311	if [ "$3" = "1" ]; then
[3522]	312	counter=$(($counter+1))
[3887]	313	LogProgress $counter $2
[3522]	314	fi
[1526]	315	# Non absolute file names should not arrive till here => skipped
	316	if [ `echo "$incoming" \| cut -c1` != '/' ]; then
[3887]	317	LogFile "WARNING: Unable to handle non-full pathname $incoming"
[1526]	318	incoming=`ReadLine`
	319	continue
	320	fi
	321	# no parent directory of incoming should be a link, copy is not possible in that case
	322	d=`dirname "$incoming"`
	323	found="false"
	324	while [ $d != "/" -a $found = "false" ]; do
[3887]	325	[ -h "$d" ] && found="true"
[1526]	326	d=`dirname "$d"`
	327	done
[3166]	328	if [ -d "$incoming" -a ! -h "$incoming" ]; then
[3887]	329	find $incoming/* -maxdepth 0 2> /dev/null \| CopyDependenciesToDirectory $outdir 0 0
[1526]	330	elif [ -e "$incoming" ] && [ $found = "false" ]; then
[3075]	331	if [ ! -h "$incoming" ]; then
[3405]	332	tar cf - -C / $incoming 2> $templog \| (cd "$outdir" ; tar xf -) \|\| Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
[3075]	333	else
	334	tdir=`dirname "$incoming"`
	335	if [ ! -e "$outdir/$tdir" ]; then
	336	mkdir -p "$outdir/$tdir"
	337	fi
	338	cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
	339	fi
[1989]	340	# Only uncompress modules if not using udevd
	341	if [ "`echo "$incoming" \| grep "lib/modules/.\..o\.gz"`" != "" ] && [ "`ps auxww \| grep -v grep \| grep -qw udevd`" != "" ]; then
[3887]	342	gunzip -f $outdir/$incoming \|\| LogAll "WARNING: Cannot gunzip $outdir/$incoming"
[925]	343	fi
[3075]	344	[ -x "$outdir" ] && StripExecutable $outdir
[747]	345	fi
	346	incoming=`ReadLine`
[3887]	347	done
[747]	348	}
	349
	350
	351	CountItemsIn() {
	352	local r
	353	r=0
	354	for q in $1 ; do
	355	r=$(($r+1))
	356	done
	357	echo $r
	358	}
	359
	360
[3887]	361	DropOptimizedLibraries() {
	362	local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
	363	filelist=$1
	364	outdir=$2
	365
	366	list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
	367	if [ "$list_of_optimized_libraries" = "" ] ; then
	368	return 0
	369	fi
	370	echo -en "Dropping i686-optimized libraries if appropriate"
	371	for optimized_lib_name in $list_of_optimized_libraries ; do
	372	echo -en "."
	373	reason=""
	374	vanilla_lib_name=`echo "$optimized_lib_name" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
	375	echo "$vanilla_lib_name" >> $filelist
	376	LogFile "INFO: Adding $vanilla_lib_name to filelist"
	377	mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
	378	rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
	379
	380	# This may return multiple files
	381	for resolved in `mr-read-all-link $vanilla_lib_name`; do
	382	LogFile "INFO: Adding as deps $resolved to filelist"
	383	vanilla_resolved_name=`echo "$resolved" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
	384	if [ "$vanilla_resolved_name" != "$resolved" ]; then
	385	mkdir -p $outdir$resolved> /dev/null 2> /dev/null
	386	rmdir $outdir$resolved > /dev/null 2> /dev/null
	387	ln -sf $vanilla_resolved_name $outdir$resolved
	388	LogFile "INFO: Excluding deps $resolved"
	389	grep -Fvx "$resolved" "$filelist" > $filelist.tmp
	390	LogFile "INFO: Replacing it with $vanilla_resolved_name"
	391	echo "$vanilla_resolved_name" >> $filelist.tmp
	392	mv -f $filelist.tmp $filelist
	393	fi
	394	done
	395	done
	396	$AWK '{ print $1; }' $filelist \| sort -u > $filelist.tmp
	397	mv -f $filelist.tmp $filelist
	398	echo -e "$DONE"
	399	}
	400
	401
[747]	402	FindAndAddUserKeyboardMappingFile() {
	403	local r res mapfile mappath included_item included_list keyfile mp locale
[3149]	404	LogAll "INFO: Analyzing your keyboard's configuration."
[3785]	405	KEYDIR=/usr/share/kbd # Slackware
	406	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
[3347]	407	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
	408	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
[3231]	409	[ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
[747]	410	if [ ! -e "$KEYDIR" ] ; then
[3149]	411	LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
[747]	412	return 0
[3569]	413	else
	414	LogFile "INFO: KEYDIR=$KEYDIR"
[747]	415	fi
[3785]	416	if [ -e "/etc/vconsole.conf" ] ; then
	417	LogFile "INFO: New Fedora style config detected."
	418	keyfile=/etc/vconsole.conf
	419	elif [ -e "/etc/sysconfig/keyboard" ] ; then
[2963]	420	LogFile "INFO: Red Hat-style config detected."
[747]	421	keyfile=/etc/sysconfig/keyboard
	422	elif [ -e "/etc/rc.d/rc.keymap" ] ; then
[2963]	423	LogFile "INFO: Slackware-style config detected."
[747]	424	keyfile=/etc/rc.d/rc.keymap
	425	elif [ -e "/etc/rc.config" ] ; then
[2963]	426	LogFile "INFO: Debian-style config detected."
[747]	427	keyfile=/etc/rc.config
	428	elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
[2963]	429	LogFile "INFO: Debian-style config detected."
[747]	430	mkdir -p $bigdir/tmp
[3278]	431	echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
[747]	432	KBDEPTH=0
	433	mkdir -p $bigdir/etc/console
[963]	434	cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
[2864]	435	echo ""
[747]	436	echo -e "$DONE"
	437	return 0
[2828]	438	elif [ -e "/etc/console-setup/boottime.kmap.gz" ] \|\| [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
[2963]	439	LogFile "INFO: Ubuntu-style config detected."
[1713]	440	mkdir -p $bigdir/tmp
[2828]	441	if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
	442	kbdfile="/etc/console-setup/boottime.kmap.gz"
	443	else
	444	kbdfile="/etc/console-setup/cached.kmap.gz"
	445	fi
[3278]	446	echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
[1713]	447	KBDEPTH=0
	448	mkdir -p $bigdir/etc/console-setup
[2828]	449	cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
[2864]	450	echo ""
[1713]	451	echo -e "$DONE"
	452	return 0
[3595]	453	elif [ -e "/etc/default/keyboard" ]; then
	454	LogFile "INFO: New Debian-style config detected."
	455	keyfile=/etc/default/keyboard
[2744]	456	elif [ -e "/etc/rc.conf" ] ; then
[2963]	457	LogFile "INFO: ArchLinux config detected."
[2744]	458	keyfile=/etc/rc.conf
[1465]	459	elif [ -e "/etc/conf.d/keymaps" ] ; then
[2963]	460	LogFile "INFO: Gentoo-style config detected."
[1465]	461	keyfile=/etc/conf.d/keymaps
[3191]	462	elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
	463	LogFile "INFO: X11-style config detected."
	464	keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
[747]	465	else
[3149]	466	LogFile "Searching for rc.config ..."
[747]	467	keyfile=`find /etc -name rc.config \| head -n1`
	468	if [ "$keyfile" = "" ] \|\| [ ! -e "$keyfile" ] ; then
[3149]	469	LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
[747]	470	return
	471	else
[2963]	472	LogFile "INFO: Found $keyfile"
[747]	473	fi
	474	fi
	475	if [ ! -e "$KEYDIR/keymaps" ] ; then
[3149]	476	LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
[747]	477	return
	478	fi
[2963]	479	LogFile "INFO: keyfile=$keyfile"
[2999]	480	# For SLES we need to remove the .map.gz extension Cf #614
	481	locale=`grep -F KEYTABLE "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2 \| sed 's/.map.gz$//'`
[747]	482	[ ! "$locale" ] && locale=`grep '.map$' "$keyfile" \| sed 's/^.* //'` # Slackware
[3595]	483	[ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2` # Gentoo, ArchLinux & New fedora
[3191]	484	[ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" \| grep -v '^#' \| awk '{print $3}' \| tr -d '"'` # Fedora 19
[3595]	485	[ ! "$locale" ] && locale=`grep -Ei 'XkbLayout' "$keyfile" \| grep -v '^#' \| cut -d= -f2 \| tr -d '"'` # New Debian 8+
[2963]	486	LogFile "INFO: locale=$locale"
[1764]	487	#
	488	# Process the keymaps dir once for all
	489	# AddKeyboardMappingFile will use it recursively
	490	#
	491	find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
	492	mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep -F "/${locale}." \| grep -vx " #."`
	493	[ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[3571]	494	# For new distro such as RHEL 7 we need that additional search
	495	[ ! "$mp" ] && mp=`grep "xkb" $MINDI_TMP/keymaps.find \| grep -E "/$locale\." \| grep -vx " #."`
[747]	496	# If we have multiple keymaps then log it !!
[3149]	497	echo "$mp" \| grep -q " " >> $LOGFILE
[747]	498	if [ $? -eq 0 ]; then
[2963]	499	LogAll "WARNING: Multiple keymaps found: $mp"
	500	LogFile "INFO: The following one will be used"
[747]	501	fi
	502	for i in $mp ; do
	503	mappath=$i
	504	[ -e "$i" ] && [ ! -d "$i" ] && break
	505	done
	506	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[3688]	507	mappath=$(find /usr /lib /lib64 -path "/kbd/keymaps//$locale \| head -1")
[747]	508	fi
[2963]	509	LogFile "INFO: mappath = $mappath"
[747]	510	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[3149]	511	LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
[747]	512	return
	513	fi
[3535]	514	echo -en "INFO: Adding keyboard mapping tables"
[747]	515	mkdir -p $bigdir/tmp
[3278]	516	echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
[2055]	517	KBDEPTH=0
[747]	518	AddKeyboardMappingFile $mappath
	519	echo -e "$DONE"
[1764]	520	rm -f $MINDI_TMP/keymaps.find
[747]	521	return 0
	522	}
	523
	524
[3241]	525	FindLdlinux32Binary() {
	526	LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
	527	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
	528	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
	529	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
	530	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
[3303]	531	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
	532	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
[3241]	533	#[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 \| grep -x "/.*/ldlinux.c32"`
[3766]	534	if [ ! -e "$LDLINUXC32" ]; then
[3241]	535	LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
[3725]	536	LDLINUXC32=/tmp/itdoesntexist
[3241]	537	else
	538	LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
	539	fi
	540	}
	541
	542
[2629]	543	FindMboot32Binary() {
	544	MBOOTC32=/usr/lib/syslinux/mboot.c32
	545	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
	546	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
	547	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
	548	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
[3303]	549	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
	550	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
[2629]	551	[ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 \| grep -x "/.*/mboot.c32"`
[2921]	552	[ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[2963]	553	LogFile "INFO: Found mboot.c32 at $MBOOTC32"
[2629]	554	}
	555
[3476]	556	FindLdlinuxe64Binary() {
	557	LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
	558	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
	559	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
	560	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
	561	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
	562	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
	563	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 \| grep -x "/.*/ldlinux.e64"`
	564	[ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
	565	LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
	566	}
	567
	568	FindSyslinux64EFI() {
	569	SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
	570	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
	571	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
	572	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
	573	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
	574	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
	575	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi \| grep -x "/.*64/syslinux.efi"`
[3491]	576	[ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[3476]	577	LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
	578	}
	579
[747]	580	FindIsolinuxBinary() {
	581	ISOLINUX=/usr/lib/isolinux.bin
	582	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
[1491]	583	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
[747]	584	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
	585	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
[1491]	586	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
[3304]	587	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
[3764]	588	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/bios/isolinux.bin
[1854]	589	[ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin \| grep -x "/.*/isolinux.bin"`
[2921]	590	[ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[2963]	591	LogFile "INFO: Found isolinux.bin at $ISOLINUX"
[747]	592	}
	593
	594
	595	GenerateGiantDependencyList() {
[3522]	596	local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item tempdepfile modres noof_lines lvmversion lvmresolved
[747]	597
[3522]	598	echo -en "INFO: Analyzing dependency requirements"
[747]	599	outfile=$1
[940]	600	tempfile=$MINDI_TMP/$$.txt
[747]	601	incoming=`ReadLine`
	602
	603	> $tempfile
	604	progress=0
	605	res=0
	606	noof_lines=$2
	607	while [ "$incoming" != "" ] ; do
[861]	608	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	609	incoming=`ReadLine`
	610	continue
	611	fi
	612	if [ "$incoming" = "LVMFILES:" ] ; then
	613	break
	614	fi
[747]	615	filelist=`GenerateListForFile "$incoming"`
	616	r=$?
[3149]	617	[ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
[747]	618	res=$(($res+$r))
[2963]	619	# LogFile "INFO: '$incoming' generates filelist '$filelist'"
[747]	620	for fname in $filelist ; do
[3321]	621	[ "$fname" != "" ] && echo "$fname" >> $tempfile
[747]	622	done
	623	progress=$(($progress+1))
[3149]	624	LogProgress $progress $noof_lines
[747]	625	incoming=`ReadLine`
	626	done
[861]	627	if [ "$incoming" = "LVMFILES:" ] ; then
	628	incoming=`ReadLine`
	629	lvmversion=""
	630	while [ "$incoming" != "" ] ; do
	631	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	632	incoming=`ReadLine`
	633	continue
	634	fi
	635	filelist=`GenerateListForFile "$incoming"`
	636	for tool in $filelist ; do
[3662]	637	lvmresolved=`readlink -f $tool`
	638	if [ "$tool" = "$lvmresolved" ]; then
	639	echo "$tool" >> $tempfile
	640	elif echo "$lvmresolved" \| grep "lvmiopversion" &> /dev/null ; then
	641	if [ "$lvmversion" = "" ] ; then
	642	lvmversion=`$lvmresolved`
	643	echo "$lvmresolved" >> $tempfile
	644	fi
	645	toolstripped=`echo $tool \| $AWK -F / '{print $NF;}'`
	646	if [ "$lvmversion" = "200" ]; then
	647	# pvdata and lvmcreate_initrd don't exist in LVM2
	648	case "$toolstripped" in
	649	"pvdata")
[861]	650	continue
	651	;;
[3662]	652	"lvmcreate_initrd")
[861]	653	continue
	654	;;
	655	esac
[3662]	656	fi
	657	toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
	658	if [ -e "$toolpath" ] ; then
[861]	659	echo "$toolpath" >> $tempfile
	660	echo "$tool" >> $tempfile
[3662]	661	else
[861]	662	toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
[3662]	663	fi
	664	if [ -e "$toolpath" ] ; then
	665	echo "$toolpath" >> $tempfile
	666	echo "$tool" >> $tempfile
[861]	667	else
[3662]	668	echo "Where are your LVM-Tools? Couldn't find $tool"
	669	fi
	670	else
[861]	671	echo "$tool" >> $tempfile
	672	fi
	673	done
	674	progress=$(($progress+1))
[3149]	675	LogProgress $progress $noof_lines
[861]	676	incoming=`ReadLine`
	677	done
[747]	678	fi
[3661]	679	echo -e "$DONE"
[747]	680
[3661]	681	echo -en "INFO: Making complete dependency list..."
[747]	682	tr -s '/' '/' < $tempfile \| sort -u > $tempfile.new
	683	mv -f $tempfile.new $tempfile
	684	> $outfile.pre
	685	progress=0
	686	noof_lines=`cat $tempfile \| wc -l`
[2963]	687	LogFile "---------------------------------"
	688	LogFile "List of dependencies: "
	689	LogFile "---------------------------------"
[747]	690	for fname in `cat $tempfile` ; do
[1876]	691	echo "$fname" \| tee -a $LOGFILE >> $outfile.pre
	692	LocateDeps $fname \| tee -a $LOGFILE >> $outfile.pre
[925]	693	progress=$(($progress+1))
[3149]	694	LogProgress $progress $noof_lines
[747]	695	done
[1684]	696	if [ _"$MONDO_SHARE" != _"" ]; then
[925]	697	mkdir -p $bigdir/tmp
[3172]	698	mkdir -p $bigdir/usr/bin
[940]	699	if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
[3149]	700	LogAll "\nINFO: Incorporating post-nuke tarball"
[3522]	701	(cd "$bigdir" ; tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log)
[747]	702	fi
[963]	703	if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
[3661]	704	LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
[925]	705	else
[3565]	706	LogAll "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
	707	LogAll " I bet you've got a spare copy of Mondo or Mindi floating around on your system."
[3661]	708	LogAll " If Mindi was called by Mondo then send a bug report."
[3565]	709	LogAll " It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
	710	LogAll " Finally, run Mindi again."
[3661]	711	Die "Odd."
[925]	712	fi
[3565]	713	cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE \|\| LogAll "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
[3270]	714	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3149]	715	LogAll "\nINFO: Incorporating Network-related settings"
[3278]	716	for r in NETFS-* ; do
[963]	717	cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE \|\| Die "Cannot copy $r - did you run out of disk space?"
[2963]	718	LogFile "INFO: Copying $r to ramdisk"
[925]	719	done
	720	fi
[747]	721	fi
[925]	722	tr ' ' '\n' < $outfile.pre \| tr -s '/' '/' \| grep -Fvx "" \| sort -u \| grep -Ev "/libX11\|/libXext\|/libXi\|/libgtk\|/libgdk" > $outfile
[747]	723	rm -f $tempfile $outfile.pre
[3661]	724	[ "$res" -eq "0" ] && echo -e "$DONE" \|\| echo "\nFailed."
[747]	725	return $res
	726	}
	727
	728
	729	GenerateListForFile() {
[3692]	730	local files_found fname incoming
[747]	731	incoming="$1"
	732	files_found=""
	733
	734	for fname in $incoming ; do
	735	files_found="$files_found `LocateFile $fname`"
	736	done
	737
	738	echo "$files_found" \| tr ' ' '\n' \| sort -u \| tr '\n' ' '
	739	}
	740
	741
	742	# Returns all disk devices which are part of a raid array
	743	GetAllRaidMembers() {
	744	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]device/ if(\$2) {print \$2}" < /etc/raidtab
	745	}
	746
	747
	748	GetFileSizeList() {
	749	local i
	750	for i in `find $1 -type d -o -print` ; do
	751	du -sk $i
	752	done
	753	}
	754
	755
[1230]	756	# Check kernel filesystem capabilites for accessing initrd image
[2429]	757	# Could be ext2 FS (old mode) or initramfs (new mode)
[1230]	758	#
	759	# Interface definition:
	760	# param #1: absolute path to kernel image
	761	GetInitrdFilesystemToUse() {
	762
	763	# interface test: make sure we have one parameter
	764	if [ $# -ne 1 ]; then
	765	Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
	766	fi
	767
	768	# interface parameters
	769	local lvKernelImage=$1
	770
	771	# local constants (filesystem magic strings)
	772	local lcMagicCramfs="<3>cramfs: wrong magic"
[2047]	773	local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
[2390]	774	local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
[3353]	775	local lcMagicInitfs="<6>checking if image is initramfs...\|[<]6[>]Unpacking initramfs...\|[<]6[>]Trying to unpack rootfs image as initramfs"
[1230]	776
	777	# local variables
	778	local lvOffset
	779	local lvScanRes
	780	local lvUseFilesystem
	781
	782	# say where we are.
[3111]	783	LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
[1230]	784
	785	# verify that file exists
	786	[ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
	787
[3111]	788	# Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
[1730]	789	file $lvKernelImage 2>&1 \| grep -q gzip
[1566]	790	if [ $? -eq 0 ]; then
[3111]	791	LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
	792	lvScanRes=`gzip -cd $lvKernelImage \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
	793	else
	794	LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
	795	# kernel is x86 boot sector in RHEL3/4 with embedded gzip content
	796	# get offet of gzip magic "1f8b0800" in file (for these older kernels)
	797	lvOffset=`od -vA n -t x1 $lvKernelImage \| tr -d '[:space:]' \| awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
	798	if [ $lvOffset -eq 0 ]; then
	799	LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
	800	lvScanRes=$lcMagicInitfs
[2393]	801	else
[3111]	802	lvOffset=`expr $lvOffset / 2`
	803	LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
	804	# scan again kernel image
	805	lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
[2393]	806	fi
[3111]	807	fi
[2393]	808
[3111]	809	# determine which filesystem to use for initrd image: ext2\|3fs, gzip'ed cpio (initramfs) or cramfs
	810	if [ `echo $lvScanRes \| grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
	811	lvUseFilesystem="ext2fs"
	812	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
	813	lvUseFilesystem="ext3fs"
	814	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
	815	lvUseFilesystem="initramfs"
	816	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
	817	lvUseFilesystem="cramfs"
[2429]	818	else
[3766]	819	# In that case, we are most probably after 2.6.30 and use the supported initramfs
[3181]	820	LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
	821	LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
	822	LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep initramfs"
[1230]	823	lvUseFilesystem="initramfs"
	824	fi
[3111]	825
[1230]	826	# say what we are using
[3111]	827	LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
[1230]	828
	829	# return file system to use
	830	echo "$lvUseFilesystem"
	831
	832	}
	833
[747]	834	# Searches members of raid device
	835	# $1: raid device (/dev/md...)
	836	GetRaidDevMembers() {
[3766]	837	if [ ! -f /etc/raidtab ]; then
[2917]	838	return
	839	fi
[747]	840	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
	841	}
	842
	843
	844	ListAllPartitions() {
[3702]	845	grep -Evx " #.\| none." $MY_FSTAB \| $AWK '/^\/dev\/[imhs]d\|\|^LABEL=\/\|^UUID=/ && !/\/fdd\|\/cdr\|\/zip\|\/floppy/ {print $1}' \| sort -u
[747]	846	[ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
[1824]	847	if [ -e "/vmfs/volumes" ]; then
	848	# For VMWare ESX 3 get the device names of these volumes
[2431]	849	vdf -P \| grep -E '/vmfs/volumes' \| $AWK '{print $1}'
[1824]	850	fi
[747]	851	return
	852	}
	853
	854
	855	ListKernelModulePaths() {
[2583]	856	local module_list module fname r kern
[1399]	857	module_list="$MODULES"
[1230]	858	# Remove unwanted modules from list
	859	for i in $DENY_MODS; do
	860	module_list=`echo ${module_list} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
	861	done
[747]	862	###
	863	### Sq-Modification ... Use kernelname for module search path if specified
	864	###
[3231]	865	if [ "${kernelname}" != "" ]
[747]	866	then
	867	kern=${kernelname}
	868	else
[2292]	869	kern="$KERVERRUN"
[747]	870	fi
[2292]	871	export KERVER=$kern
[747]	872	###
	873	### Sq-Mod End
	874	###
[3310]	875	# Get rid of duplicates
	876	for module in `echo $module_list \| tr ' ' '\n' \| sort -u` ; do
[747]	877	r=`find /lib/modules/$kern -type f \| grep "/${module}\..*o" \| tail -n1`
[2471]	878	if [ -z "$r" ]; then
	879	if [ "`echo "$MODULES" \| grep -w $module`" ]; then
	880	r="[live module file not found]"
	881	else
	882	r="[extra module file not found]"
	883	fi
[2583]	884	else
	885	[ -f "$r" ] && echo "$r"
[2471]	886	fi
[2963]	887	LogFile "INFO: module $module --> $r"
[747]	888	done
	889	find /lib/modules/$kern/modules.* -type f 2> /dev/null
	890	}
	891
[1784]	892	#
[3766]	893	# Critical function which computes all dependencies (dyn. lib.)
[1784]	894	# for a list of binaries
	895	#
[747]	896	LocateDeps() {
	897	local incoming fname deps
[1724]	898	incoming="$*"
[3231]	899	deps=""
	900
[747]	901	for fname in $incoming ; do
	902	if [ ! -e "$fname" ] ; then
[3661]	903	LogFile "WARNING: $fname does not exist; cannot be LDD'd."
[747]	904	if echo $fname \| grep lvm &> /dev/null ; then
[2963]	905	LogFile " This warning only affects you if you are using LVM."
[1399]	906	if echo "$MODULES" \| grep lvm &> /dev/null ; then
[3231]	907	LogFile " I think you are, so please take heed!"
[747]	908	else
[3231]	909	LogFile " I don't think you are, so don't worry about it."
[747]	910	fi
	911	fi
	912	else
[3766]	913	deps="$deps $fname"
[747]	914	fi
	915	done
[3692]	916	mr-read-all-link `mr-process-ldd $deps \| sort -u` $deps \| sort -u
[747]	917	}
	918
[925]	919
[747]	920	LocateFile() {
[3692]	921	local j dn newdn bn path fname_to_find output
[747]	922	fname_to_find="$1"
[1526]	923	# It's an absolute path
[3231]	924	j=`echo "$fname_to_find" \| cut -c1`
	925	if [ _"$j" = _"/" ]; then
	926	dn=`dirname $fname_to_find`
	927	# We suppose that the link is already included, just add the new file
	928	if [ -h "$dn" ]; then
	929	newdn=`readlink -f $dn`
	930	bn=`basename $fname_to_find`
	931	output="$newdn/$bn"
	932	else
	933	output="$fname_to_find"
	934	fi
[860]	935	if [ -h "$output" ] ; then
[3231]	936	output="`mr-read-all-link $output` $output"
[860]	937	fi
[859]	938	echo "$output"
	939	return 0
[747]	940	fi
[1526]	941	# It's not an absolute path
[747]	942	output=""
[1526]	943	for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
	944	#for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
	945	[ -h "$path" ] && continue
	946	[ ! -e "$path/$fname_to_find" ] && continue
	947	output="$path/$fname_to_find $output"
	948	if [ -h "$path/$fname_to_find" ] ; then
[3231]	949	output="`mr-read-all-link $path/$fname_to_find` $output"
[1526]	950	fi
[747]	951	done
	952	if [ "$output" = "" ] ; then
[860]	953	return 1
[747]	954	fi
	955	echo "$output"
	956	return 0
	957	}
	958
[3149]	959	LogProgress() {
[3293]	960	local i progress modres noof_lines title
[3766]	961
[3149]	962	progress=$1
	963	noof_lines=$2
[3293]	964	title=$3
[747]	965
[3149]	966	i=$(($progress*100))
	967	if [ $noof_lines -ne 0 ]; then
	968	i=$(($i/$noof_lines))
	969	else
	970	i=0
	971	fi
[3293]	972
[3766]	973	if [ _"$MONDO_SHARE" != _"" ]; then
[3293]	974	echo "$title $i%"
	975	else
	976	echo -en "\r\t\t\t\t\t\t\t\t"
	977	echo -en "$i"
	978	echo -en "%"
	979	modres=$(($progress%4))
	980	[ "$modres" -eq "0" ] && echo -en "\t/"
	981	[ "$modres" -eq "1" ] && echo -en "\t-"
	982	[ "$modres" -eq "2" ] && echo -en "\t\\"
	983	[ "$modres" -eq "3" ] && echo -en "\t\|"
	984	fi
[3149]	985	}
	986
[3692]	987	# Called by PrepareTargetDir, to make /tmp/$MRCFG
[747]	988	MakeMondoConfigFile() {
[3692]	989	local outfile use_lzo use_comp use_star use_gzip use_lzma
[747]	990	outfile=$1
	991	> $outfile
	992	[ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
	993	[ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
[1698]	994	[ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
[747]	995	[ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
	996	[ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
	997	[ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
	998	use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
[998]	999	use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
[3149]	1000	use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
[747]	1001	use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
	1002	use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
	1003	echo "use-lzo $use_lzo" >> $outfile
[998]	1004	echo "use-gzip $use_gzip" >> $outfile
[747]	1005	echo "use-star $use_star" >> $outfile
[3149]	1006	echo "use-lzma $use_lzma" >> $outfile
[747]	1007	echo "use-comp $use_comp" >> $outfile
[3397]	1008	echo "boot-type $BOOT_TYPE" >> $outfile
[747]	1009	echo "datestamp `date`" >> $outfile
	1010	[ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
[940]	1011	AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
	1012	AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
	1013	AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
[3278]	1014	AddFileToCfgIfExists $MINDI_TMP/ISO-DIR iso-dir $outfile
[940]	1015	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
	1016	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
[3278]	1017	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER bootloader.ver $outfile
[940]	1018	AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
	1019	AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
	1020	AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
[3278]	1021	AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
	1022	AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
	1023	AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
	1024
[3270]	1025	# Deal with network configuration in a portable way
	1026	if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
	1027	mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
[3705]	1028	if [ $? -ne 0 ]; then
	1029	Die "mr-net-get-config didn't execute correctly. Check dependencies, probably the perl Net::IPv4Addr module is missing"
	1030	fi
[3270]	1031	fi
[747]	1032	}
	1033
[2618]	1034	# Get PV's for an LV
	1035	GetPVsForLV() {
[3692]	1036	local vg
	1037
[3368]	1038	if [ -n "$1" ]; then
	1039	vg=`$LVMCMD lvdisplay $1 2>/dev/null \|awk '/VG Name/{print $NF;exit}'`
	1040	if [ -z "$vg" ]; then
	1041	return
	1042	fi
	1043	$LVMCMD vgdisplay -v $vg 2>/dev/null \| awk '/PV Name/{print $NF}'
	1044	fi
[2618]	1045	}
[747]	1046
[2618]	1047
[747]	1048	MakeMountlist() {
[2907]	1049	local mountlist all_partitions current_partition \
[747]	1050	partition_size partition_format outstring partition_number \
	1051	partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
[2013]	1052	absolute_partition old_partition_fmt current_lvolume uname skip
[747]	1053
[3149]	1054	LogFile "------------------------------------"
[3522]	1055	LogFile "INFO: Your raw fstab file looks like this:"
[2963]	1056	LogFile "------------------------------------"
[747]	1057	cat $MY_FSTAB >> $LOGFILE
[3149]	1058	LogAll "-----------------------------------"
[3522]	1059	LogAll "INFO: Your mountlist will look like this:"
[3149]	1060	LogAll "-----------------------------------"
[747]	1061
[2907]	1062	# mountlist(OUT)
[747]	1063	mountlist=$1
	1064
	1065	# NB: partition = device
	1066	# NB: mountpt = where the device is mounted
	1067
	1068	[ -e "$MY_FSTAB" ] \|\| Die "Cannot find your fstab file ($MY_FSTAB)"
	1069
[3565]	1070	[ "$mountlist" != "" ] && [ "$mountlist" != "/" ] && rm -Rf $mountlist
[747]	1071	> $mountlist
	1072	all_partitions=""
	1073
	1074	if [ $LVM != "false" ]; then
[3499]	1075	LogFile "INFO: Analyzing LVM..."
[968]	1076	$MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
[971]	1077	if [ $? -ne 0 ]; then
[963]	1078	LVM="false"
	1079	fi
[2536]	1080	# Excluded LVs and GVs are not reported here
[2424]	1081	all_partitions=`cat $MINDI_TMP/lvm.res \| grep -F ">>>" \| cut -d' ' -f2-`
[747]	1082	fi
	1083	all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
	1084	for i in $IMAGE_DEVS ; do
	1085	mount \| grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
	1086	done
	1087	[ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" \| tr ' ' '\n' \| sort -u \| tr '\n ' ' '`"
[3149]	1088	printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID \| tee -a $LOGFILE
	1089	printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------ ------- ---------- \| tee -a $LOGFILE
[3028]	1090	useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
[747]	1091	for c_p in $all_partitions ; do
[3702]	1092	# Skip fd/cd devices, network FS, cifs, brtfs subvols
[2452]	1093	[ "`echo "$useless_dev" \| grep -F "$c_p"`" != "" ] \|\| [ "`echo "$c_p" \| grep ":"`" != "" ] \|\| [ "`echo "$c_p" \| grep -E "^//"`" != "" ]&& continue
[747]	1094	[ "`echo "$c_p" \| grep -x "/dev/cdroms.*"`" ] && continue
	1095	if [ -h "$c_p" ] && [ "`echo "$c_p" \| grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/md"`" = "" ] ; then
[861]	1096	current_partition=`readlink -f $c_p`
[3046]	1097	if [ "`echo "$current_partition" \| grep -F "/dev/mapper"`" != "" ]; then
	1098	current_partition="$c_p"
	1099	elif [ "`echo $current_partition \| grep -E '^/dev/dm-'`" ]; then
[3059]	1100	# For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
[3066]	1101	current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
[3046]	1102	fi
[747]	1103	[ "`echo "$useless_dev" \| grep -F "$current_partition"`" ] && continue
	1104	else
	1105	current_partition="$c_p"
	1106	fi
	1107	[ "$c_p" = "none" ] && continue
[3702]	1108
[747]	1109	redhat_label=""
[1831]	1110	label=""
[957]	1111	uuid=""
[861]	1112	absolute_partition=`readlink -f $c_p`
[2965]	1113	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$current_partition" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[747]	1114
[1986]	1115	# set default in case we dont't find it
	1116	str_to_find_fmt_with=$current_partition
	1117
[747]	1118	# This part tries to retrieve the correct device from a LABEL line in /etc/fstab
	1119	# current_partition contains only first column of /etc/fstab
[2965]	1120	if [ "`echo "$current_partition" \| grep -i "LABEL="`" != "" ]; then
[980]	1121	redhat_label=`echo "$current_partition" \| cut -d'=' -f2`
[747]	1122	actual_dev=""
[853]	1123
	1124	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1125	if [ -x "/sbin/findfs" ]; then
[2847]	1126	actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
[853]	1127	fi
[747]	1128
[853]	1129	# 2nd try : blkid, the good way for all LABEL except swap
	1130	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[2965]	1131	actual_dev=`/sbin/blkid \| grep "$redhat_label" \| grep LABEL= \| cut -d':' -f1`
[747]	1132	# For LVM FS it will give a /dev/dm-# which should then be converted
[748]	1133	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1134	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1135	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[747]	1136	for dev in `ls /dev/mapper/*`; do
[963]	1137	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1138	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[747]	1139	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1140	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[747]	1141	break
	1142	fi
	1143	done
	1144	fi
	1145	fi
	1146
[853]	1147	# 3rd try, which works on a standard partition (ext2/3), but not on swap
[3766]	1148	# For LVM gives a /dev/mapper entry
[747]	1149	if [ "x$actual_dev" = "x" ]; then
[2965]	1150	actual_dev=`/bin/mount -l \| grep "\[$redhat_label\]" \| cut -d' ' -f1`
[747]	1151	fi
	1152
[3766]	1153	# 4th try, with vol_id
[747]	1154	# SWAP only
	1155	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[2965]	1156	list_swaps=`cat /proc/swaps \| grep "/dev/" \| $AWK '{ print $1 }' `
[747]	1157	for dev_swap in $list_swaps ; do
[2965]	1158	dev_exists=`/sbin/vol_id $dev_swap \| grep "$redhat_label"`
[747]	1159	if [ "x$dev_exists" != "x" ]; then
	1160	actual_dev=$dev_swap
	1161	break;
	1162	fi
	1163	done
	1164	fi
	1165
[853]	1166	# 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
[789]	1167	# LABEL=SW-cciss/c0d0p3 (RDP)
[853]	1168	# or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
[747]	1169	# SWAP only
[2965]	1170	if [ "x$actual_dev" = "x" -a _"`echo $current_partition \| grep -iE 'LABEL=SWAP\|LABEL=SW-'`" != _"" ]; then
[2013]	1171	skip=""
[2292]	1172	uname=$KERVERRUN
[2013]	1173	[ "`echo $uname \| grep "2.4.[0-9]"`" != "" ] && skip=16
	1174	# 2.6.12 needs 16 (FC3)
	1175	[ "`echo $uname \| grep "2.6.[0-1]"`" != "" ] && skip=16
	1176	# 2.6.19 and upper needs 1052
	1177	[ "`echo $uname \| grep "2.6.19"`" != "" ] && skip=1052
	1178	[ "`echo $uname \| grep "2.6.[2-9]"`" != "" ] && skip=1052
[3887]	1179	[ "`echo $uname \| grep "3.[0-9].[0-9]"`" != "" ] && skip=1052
[2013]	1180	if [ $skip = "" ]; then
	1181	Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
	1182	fi
[853]	1183	for try_dev in `tail +2 /proc/swaps \| cut -d' ' -f1`
	1184	do
	1185	# Location of the swap label for kernel 2.6
[2013]	1186	try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
[853]	1187	if [ "x$try_dev_label" = "x$redhat_label" ]; then
[855]	1188	actual_dev=$try_dev
[853]	1189	fi
	1190	done
[747]	1191	fi
[1008]	1192
	1193	# Check if one of all those tries has known success
	1194	if [ "x$actual_dev" != "x" ]; then
	1195	current_partition=$actual_dev
	1196	else
[1885]	1197	Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
[1008]	1198	fi
[957]	1199	# This part tries to retrieve the correct device from a UUID line in /etc/fstab
	1200	# current_partition contains only first column of /etc/fstab
[2965]	1201	elif [ "`echo "$current_partition" \| grep -i "UUID="`" != "" ]; then
[980]	1202	uuid=`echo "$current_partition" \| cut -d'=' -f2`
[957]	1203	actual_dev=""
	1204
	1205	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1206	if [ -x "/sbin/findfs" ]; then
	1207	actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
	1208	fi
	1209
[1531]	1210	# 2nd try : blkid, the good way for all UUID except swap
[957]	1211	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[2965]	1212	actual_dev=`/sbin/blkid \| grep "$uuid" \| grep UUID= \| cut -d':' -f1`
[957]	1213	# For LVM FS it will give a /dev/dm-# which should then be converted
	1214	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1215	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1216	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[957]	1217	for dev in `ls /dev/mapper/*`; do
[963]	1218	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1219	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[957]	1220	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1221	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[957]	1222	break
	1223	fi
	1224	done
	1225	fi
	1226	fi
	1227
[3766]	1228	# 3th try, with vol_id
[957]	1229	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[2965]	1230	list_dev=`mount \| grep -E '^/' \| $AWK '{ print $1 }' `
[957]	1231	for dev in $list_dev ; do
[2965]	1232	dev_exists=`/sbin/vol_id $dev \| grep "$uuid"`
[957]	1233	if [ "x$dev_exists" != "x" ]; then
	1234	actual_dev=$dev
	1235	break;
	1236	fi
	1237	done
	1238	fi
	1239
[1531]	1240	# 4th try, with dumpuuid (VMWare only ?) for swap
	1241	if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
[2965]	1242	list_dev=`cat /proc/swaps \| grep -E '^/' \| $AWK '{ print $1 }' `
[1531]	1243	for dev in $list_dev ; do
[2965]	1244	dev_exists=`/sbin/dumpuuid $dev \| grep "$uuid"`
[1531]	1245	if [ "x$dev_exists" != "x" ]; then
	1246	actual_dev=$dev
	1247	break;
	1248	fi
	1249	done
	1250	fi
	1251
[747]	1252	# Check if one of all those tries has known success
	1253	if [ "x$actual_dev" != "x" ]; then
	1254	current_partition=$actual_dev
	1255	else
[2069]	1256	Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs\|blkid\|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
[747]	1257	fi
	1258	else
[1863]	1259	# Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
	1260	# they use symlinks in fstab unrelated to what is shown in mount !
	1261	if [ _"$partition_mountpt" = _"" ]; then
[1986]	1262	# set default in case we dont't find it
[2965]	1263	for tmpp in `tr -s '\t' ' ' < $MY_FSTAB \| grep -Ev "^#" \| $AWK '{print $1}'`; do
[3084]	1264	if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
[1863]	1265	str_to_find_fmt_with=$tmpp
[2965]	1266	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$tmpp" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[1864]	1267	break;
[1863]	1268	fi
	1269	done
	1270	fi
[747]	1271	fi
	1272
[3702]	1273	# Avoid analyzing btrfs subvol partitions
	1274	partition_option=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$str_to_find_fmt_with" \| grep -vx " #." \| $AWK '{print $4}' \| grep -v 'subvol=' \| head -n1`
[3084]	1275	# Detects noauto partitions not mounted and exclude them
	1276	if [ "`echo "$partition_option" \| grep -i noauto`" != "" ] && [ "`mount \| grep -w "$partition_mountpt"`" = "" ] ; then
[3702]	1277	LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
[3084]	1278	continue
	1279	fi
	1280	# Detects bind partitions and exclude them
	1281	if [ "`echo "$partition_option" \| grep -iw bind`" != "" ]; then
[3702]	1282	LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
[3084]	1283	continue
	1284	fi
	1285
[2566]	1286	# Look for devices which have to be excluded
	1287	skip=0
	1288	if [ "$MINDI_EXCLUDE_DEVS" ] ; then
[2568]	1289	l=""
[3231]	1290	list_of_devices="`mr-read-all-link $current_partition`"
[2568]	1291	for d in $list_of_devices; do
[2579]	1292	l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
[2568]	1293	done
[2618]	1294
	1295	# Remove PVs from LVs excluded
	1296	l="$l `GetPVsForLV $current_partition`"
	1297
	1298	# We want a single unique list
[3522]	1299	list_of_devices="`echo $l \| tr ' ' '\n' \| sort -u`"
[2618]	1300
[2854]	1301	for d in `echo $MINDI_EXCLUDE_DEVS \| sed 's/\|/ /g'`; do
[2568]	1302	if [ "`echo " $list_of_devices " \| grep " $d"`" != "" ]; then
[2963]	1303	LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
[2566]	1304	skip=1
	1305	continue
	1306	fi
	1307	done
	1308	fi
	1309	if [ $skip -eq 1 ]; then
	1310	continue
	1311	fi
	1312
[3702]	1313	# sort in case of btrfs subvol
	1314	partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB \| sort -u`
[3028]	1315	# Detects iso9660 ISO images and exclude them
	1316	if [ "`echo "$partition_format" \| grep -iw iso9660`" != "" ]; then
[3064]	1317	LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
[3028]	1318	continue
	1319	fi
[747]	1320	# Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
	1321	# for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
	1322	# the former is then a link to the latter, so we test whether
	1323	# $current_partition is actually such a link or not and set
[3766]	1324	# $current_lvolume accordingly. On Debian you may find more than one answer
[755]	1325	# so we remove the one corresponding to /dev/.static
	1326	# On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
	1327	# principle is the same and we need to find the link to it as well.
	1328	# Note that $current_lvolume may well be an
[747]	1329	# ordinary device. It is just to make sure that we feed the right value
	1330	# into any of the LVM tools if possible.
	1331
[3064]	1332	current_lvolume="$current_partition"
[763]	1333	if [ $LVM = "v2" ] && [ "`echo $current_partition \| grep -E '^/dev/mapper/'`" ]; then
[755]	1334	# .static dir are a Debian specificity
[763]	1335	current_lvolume="`find /dev -lname "$current_partition" \| grep -Ev '^/dev/\.static/'`"
[755]	1336	echo $current_lvolume \| grep -q ' '
[784]	1337	if [ $? -eq 0 ]; then
[2963]	1338	LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
[755]	1339	fi
[2072]	1340	# if it's not found, it may well be a real device such as a multipath one
	1341	# /dev/mapper/mpath... Thus we revert the situation so that next test succeed
	1342	if [ _"$current_lvolume" = _"" ]; then
	1343	current_lvolume="$current_partition"
	1344	fi
[747]	1345	fi
[3766]	1346	#
[747]	1347	# End of LVM device style variation code (other than $current_lvolume).
	1348
[745]	1349	if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
	1350	# Size computed via LVM not directly
[747]	1351	partition_size="lvm"
	1352	else
	1353	[ "`echo "$current_partition" \| grep "[0-9]"`" = "" ] && continue
	1354	[ "`echo "$current_partition" \| grep -c "^/"`" -ne "1" ] && continue
	1355	if [ "$partition_format" = "swap" ] \|\| [ "$partition_mountpt" = "swap" ] ; then
[2947]	1356	# Skip swap files
	1357	[ "`echo "$current_partition" \| grep -E "^/dev"`" = "" ] && continue
[2919]	1358	partition_size=`grep -Fv "Priority" /proc/swaps \| tr -s '\t' ' ' \| grep -F "$current_partition " \| $AWK '{print $3}'`
[747]	1359	[ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
[3368]	1360	[ "$partition_format" != "swap" ] && partition_format="swap"
[747]	1361	if [ "$partition_size" = "" ] ; then
[3368]	1362	totalsize=0
	1363	items=0
	1364	for i in `tr -s ' ' '\t' < /proc/swaps \| grep -Fv "Filename" \| cut -f3` ; do
[747]	1365	totalsize=$(($totalsize+$i))
	1366	items=$(($items+1))
[3368]	1367	done
	1368	[ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) \|\| partition_size=0
	1369	[ "$partition_size" -lt "125000" ] && partition_size=125000
	1370	LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
[747]	1371	fi
[2947]	1372	else
	1373	partition_size=`SizeOfPartition $current_partition`
[747]	1374	fi
	1375	fi
	1376	[ "$partition_mountpt" = "swap" ] && partition_format="swap"
	1377	[ "$partition_format" = "swap" ] && partition_mountpt="swap"
	1378	if [ "$partition_mountpt" = "" ] ; then
	1379	if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
	1380	if [ "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
	1381	partition_mountpt="raid"
	1382	partition_format="raid"
	1383	else
	1384	partition_mountpt="lvm"
	1385	partition_format="lvm"
	1386	fi
	1387	fi
	1388	fi
	1389	psz=$partition_size
[2963]	1390	LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
[747]	1391	[ "$psz" != "lvm" ] && psz=$(($psz/1024))
	1392	if [ "`echo " $IMAGE_DEVS " \| grep -F " $current_partition "`" != "" ] ; then
	1393	partition_mountpt="image"
	1394	old_partition_fmt=$partition_format
	1395	partition_format="`$FDISK -l 2>> $LOGFILE \| tr '*' ' ' \| tr '+' ' ' \| tr -s ' ' '\t' \| grep -w "$absolute_partition" \| cut -f5`"
	1396	partition_size=$(($partition_size+1)); # just in case
	1397	if [ "$partition_format" = "Linux" ] ; then
[2963]	1398	LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
	1399	LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
[747]	1400	partition_format=$old_partition_fmt
	1401	fi
	1402	fi
[2566]	1403
[747]	1404	if [ ! "$partition_mountpt" ] ; then
[2963]	1405	LogFile "------- $FDISK -l $qq log ------------"
[1883]	1406	for qq in "" `find /dev/ida/cd ! -name 'p' 2> /dev/null`; do
[747]	1407	partition_format=`$FDISK -l $qq 2>> $LOGFILE \| grep -w "$c_p" \| sed 's/12/\|/' \| tr -s '\t' ' ' \| cut -d'\|' -f2 \| cut -d' ' -f2-9`
	1408	[ "$partition_format" ] && break
	1409	done
[2963]	1410	LogFile "------- $FDISK log end ------------"
[747]	1411	if [ "$partition_format" = "Compaq diagnostics" ] ; then
	1412	partition_format="compaq"
	1413	elif [ ! "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
[3149]	1414	LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
[747]	1415	continue
	1416	fi
	1417	fi
[1755]	1418	if [ "$redhat_label" ]; then
	1419	label="$redhat_label"
[1756]	1420	elif [ "$uuid" ]; then
[1755]	1421	label="$uuid"
	1422	fi
[3330]	1423
	1424	# On RHEL 7 they use UUID concretely, even when not mentioned in fstab
	1425	# in order to mount the root part e.g. in grub.
	1426	# One way to solve this is to add the UUID now, if there wasn't one so it's
	1427	# restored correctly
	1428	if [ _"$label" = _"" ]; then
	1429	label=`blkid $current_partition \| perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
	1430	fi
	1431
[747]	1432	partition_format="`echo "$partition_format" \| cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
[963]	1433	[ "$partition_format" = "auto" ] && partition_format="`mount \| grep -w $current_partition \| $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
[3149]	1434	unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
[747]	1435	if [ "$current_partition" = "" ] ; then
[2963]	1436	LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
[747]	1437	elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
	1438	if [ "`grep -F device /etc/raidtab 2>/dev/null \| grep -F $current_partition`" ] ; then
	1439	partition_mountpt=raid
	1440	partition_format=raid
[3149]	1441	printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
[1755]	1442	printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1443	else
[2963]	1444	LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
[747]	1445	fi
	1446	elif [ "$partition_format" = "" ] ; then
[2963]	1447	LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
[747]	1448	elif [ "$partition_size" = "" ] ; then
[2963]	1449	LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
[747]	1450	elif [ "$partition_mountpt" = "/proc" ] \|\| [ "$partition_mountpt" = "/dev/pts" ] ; then
	1451	continue
	1452	else
	1453	if [ "$partition_format" = "dos" ] \|\| [ "$partition_format" = "msdos" ] ; then
[3522]	1454	LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
[747]	1455	partition_format="vfat"
	1456	fi
[3149]	1457	printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
[1755]	1458	printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1459	fi
	1460	done
[3766]	1461	LogAll "-----------------------------------"
[3730]	1462
[3744]	1463	# Manages potential btrfs subvol partitions so they can be restored
	1464	grep -qE 'btrfs[ ]+subvol=' $MY_FSTAB
	1465	if [ $? -eq 0 ]; then
	1466	# List looks like this
	1467	# ID 257 gen 20074 top level 5 path <FS_TREE>/@
	1468	# ID 260 gen 19927 top level 257 path @/home
	1469	# ID 261 gen 19927 top level 257 path @/opt
	1470	touch $MINDI_TMP/create-btrfs-subvol $MINDI_TMP/mount-btrfs-subvol $MINDI_TMP/umount-btrfs-subvol
	1471	btrfs subvolume list -a / 2>/dev/null > $MINDI_TMP/btrfssubvol.txt
	1472	LogFile "btrfs subvolumes layout is:"
	1473	LogFile "---------------------------"
	1474	cat $MINDI_TMP/btrfssubvol.txt >> $LOGFILE
	1475	LogFile "---------------------------"
	1476	grep -E 'btrfs[ ]+subvol=' $MY_FSTAB > $MINDI_TMP/btrfs-extract
	1477	LogFile "btrfs subvolumes referenced in fstab:"
	1478	LogFile "-------------------------------------"
	1479	cat $MINDI_TMP/btrfs-extract >> $LOGFILE
	1480	LogFile "-------------------------------------"
	1481	# We suppose there is only one FS
	1482	sep=`btrfs subvolume list -a / \| grep FS_TREE \| sed 's/.<FS_TREE>\/$.$/\1/'`
	1483	echo "btrfs subvolume create /mnt/RESTORING/$sep" >> $MINDI_TMP/create-btrfs-subvol
[3766]	1484	while read dev mp type opt dum dum; do
[3744]	1485	echo $dev \| grep -qE 'UUID\|LABEL'
	1486	if [ $? -eq 0 ]; then
	1487	label=`echo $dev \| cut -d= -f2`
	1488	device=`grep $label $mountlist \| awk '{print $1}'`
	1489	else
	1490	device=$dev
	1491	fi
	1492	subvol=`echo $opt \| awk -F$sep '{ print $2 }' \| cut -d, -f1`
	1493	#top=`grep -E "@$subvol$" $MINDI_TMP/btrfssubvol.txt \| awk '{ print $7 }'`
	1494	#btrfs=`grep -E "^ID $top " $MINDI_TMP/btrfssubvol.txt \| awk '{ print $9 }' \| sed 's/<FS_TREE>//' \| sed 's/@$//'`
	1495	mountpoint="/mnt/RESTORING/$sep$subvol"
	1496	# If the intermediate dirs of subvol are not a subvolume, we need to create them as dir
	1497	parent=`dirname $subvol`
	1498	grep -qE "$sep$parent$" $MINDI_TMP/btrfssubvol.txt
	1499	if [ $? -ne 0 ]; then
	1500	echo "mkdir -p /mnt/RESTORING/$sep$parent" >> $MINDI_TMP/create-btrfs-subvol
	1501	fi
	1502	echo "btrfs subvolume create $mountpoint" >> $MINDI_TMP/create-btrfs-subvol
	1503	echo "mount -t btrfs -o subvol=$sep$subvol $device $mountpoint" >> $MINDI_TMP/mount-btrfs-subvol
	1504	echo "umount $mountpoint" >> $MINDI_TMP/umount-btrfs-subvol
	1505	done < $MINDI_TMP/btrfs-extract
	1506	rm -f $MINDI_TMP/btrfs-extract
	1507	chmod 755 $MINDI_TMP/create-btrfs-subvol $MINDI_TMP/mount-btrfs-subvol $MINDI_TMP/umount-btrfs-subvol
	1508	LogFile "Your create-btrfs-subvol file content is:"
	1509	LogFile "-----------------------------------------"
	1510	cat $MINDI_TMP/create-btrfs-subvol >> $LOGFILE
	1511	LogFile "-----------------------------------------"
	1512	LogFile "Your mount-btrfs-subvol file content is:"
	1513	LogFile "-----------------------------------------"
	1514	cat $MINDI_TMP/mount-btrfs-subvol >> $LOGFILE
	1515	LogFile "-----------------------------------------"
	1516	LogFile "Your umount-btrfs-subvol file content is:"
	1517	LogFile "-----------------------------------------"
	1518	cat $MINDI_TMP/umount-btrfs-subvol >> $LOGFILE
	1519	LogFile "-----------------------------------------"
	1520	fi
[747]	1521	}
	1522
[2432]	1523	CheckMountlist() {
	1524	local file=$1
	1525	# Coherency verification
[2529]	1526	ML01=`cat $file \| wc -l`
[2995]	1527	ML02=`grep -vE ' lvm \| raid \| swap ' $file \| wc -l`
[2432]	1528	ML1=`$AWK '{print $1}' $file \| sort -u \| wc -l`
[3024]	1529	ML2=`grep -vE ' lvm \| raid \| swap ' $file \| $AWK '{print $2}' \| sort -u \| wc -l`
[2529]	1530	if [ "$ML01" -ne "$ML1" ]; then
[2963]	1531	LogFile "--------------------------------------------"
[3081]	1532	LogAll "WARNING: Duplicate device entry in mountlist"
[2963]	1533	LogFile "--------------------------------------------"
[2432]	1534	fi
[2529]	1535	if [ "$ML02" -ne "$ML2" ]; then
[2963]	1536	LogFile "--------------------------------------------"
	1537	LogAll "WARNING: Duplicate mountpoint entry in mountlist"
	1538	LogFile "------------------------------------------------"
[2432]	1539	fi
	1540	}
[747]	1541
[3476]	1542
[3522]	1543	MakeISOErrors() {
[3421]	1544
[3522]	1545	LogFile "----------- $ISO_CMD's errors --------------"
[3596]	1546	LogAll "Command invoked: $CMD ."
[3522]	1547	LogAll "$ISO_CMD returned the following errors:"
	1548	cat $MINDI_TMP/mkisofs.log \| tee -a $LOGFILE
	1549	LogAll "ERROR: Failed to create ISO image."
	1550	}
[3499]	1551
[3532]	1552	MakeISO() {
	1553
[3596]	1554	LogAll "INFO: Generating ISO image."
[3608]	1555	LOCISO=`echo $CMD \| perl -p -e 's\|.* -o (.+)/mindi.iso .*\|$1\|'`
[3532]	1556	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
	1557	if [ $? -ne 0 ] ; then
[3596]	1558	# In case of UEFI handle differences in option handling
[3532]	1559	if [ "$BOOT_TYPE" = "UEFI" ]; then
	1560	CMD=`echo $CMD \| perl -p -e 's\|--efi-boot \|-eltorito-platform 0xEF -eltorito-boot \|; s\|-efi-boot \|-eltorito-platform 0xEF -eltorito-boot \|;'`
	1561	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
[3596]	1562	if [ $? -ne 0 ] ; then
	1563	# xorriso e.g.
	1564	CMD=`echo $CMD \| perl -p -e 's\|-eltorito-platform 0xEF \|\|'`
	1565	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
	1566	if [ $? -eq 0 ] ; then
	1567	LogAll "INFO: Invoking $CMD ."
[3608]	1568	LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
[3596]	1569	else
	1570	MakeISOErrors
[3599]	1571	fi
[3596]	1572	else
	1573	LogAll "INFO: Invoking $CMD ."
[3608]	1574	LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
[3532]	1575	fi
	1576	else
	1577	MakeISOErrors
	1578	fi
	1579	else
[3596]	1580	LogAll "INFO: Invoking $CMD ."
[3608]	1581	LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
[3532]	1582	fi
	1583	rm -f $MINDI_TMP/mkisofs.log
	1584	}
	1585
[3522]	1586	MakeBootableDevice() {
[3499]	1587
[3522]	1588	local target tbc retval part size mount_opt
	1589
	1590	target="$1"
	1591
	1592	rm -Rf $MINDI_TMP/target
	1593	mkdir -p $MINDI_TMP/target/{images,archives,tmp}
	1594
	1595	LogAll "INFO: Copying $MINDI_CACHE/*.gz to $MINDI_TMP/target/images"
	1596	cp -f $MINDI_CACHE/*.gz $MINDI_TMP/target/images 2>> $LOGFILE \|\| LogAll "WARNING: MakeBootableDevice: Cannot copy files to $MINDI_TMP/target/images"
	1597	for i in memdisk memtest.bin memtest.img ; do
	1598	j=$MINDI_LIB/$i
	1599	k=$MINDI_TMP/target
	1600	if [ -e "$j" ] ; then
	1601	LogAll "INFO: Copying $j to $k"
	1602	cp -f $j $k 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $k"
	1603	cp -f $j $MINDI_TMP 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $MINDI_TMP"
[3766]	1604	if [ _"$MONDO_SHARE" != _"" ]; then
[3522]	1605	cp -f $j $MONDO_ROOT 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $MONDO_ROOT"
[3499]	1606	fi
[3522]	1607	fi
	1608	done
[3499]	1609
[3522]	1610	retval=0
	1611	LogAll "INFO: Copying $kernelpath to $MINDI_TMP/target/vmlinuz"
	1612	cp $kernelpath $MINDI_TMP/target/vmlinuz 2>> $LOGFILE
[3528]	1613	if [ $? -ne 0 ] ; then
[3522]	1614	LogAll "ERROR: Failed to copy $kernelpath $MINDI_TMP/target/"
	1615	retval=$(($retval+1))
	1616	fi
	1617	LogAll "INFO: Copying $MINDI_TMP/initrd.img to $MINDI_TMP/target/initrd.img"
	1618	cp $MINDI_TMP/initrd.img $MINDI_TMP/target/ 2>> $LOGFILE
[3528]	1619	if [ $? -ne 0 ] ; then
[3522]	1620	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MINDI_TMP/target/"
	1621	retval=$(($retval+1))
	1622	fi
[3421]	1623
[3692]	1624	# copy boot stuff now generated in PrepareBigDir
[3522]	1625	if [ "$BOOT_TYPE" = "UEFI" ]; then
	1626	(cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
	1627	tbc="EFI"
[3528]	1628	# Also prepare a BIOS compatible boot
	1629	if [ "$target" = "ISO" ]; then
	1630	cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
	1631	fi
[3522]	1632	else
	1633	(cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
	1634	tbc="syslinux"
	1635	if [ -f "$MINDI_TMP/target/$tbc/syslinux.cfg" ]; then
	1636	LogFile "----------- syslinux's conf --------------"
	1637	cat $MINDI_TMP/target/$tbc/syslinux.cfg >> $LOGFILE
	1638	LogFile "------------------------------------------"
	1639	fi
	1640	if [ "$target" = "ISO" ]; then
	1641	cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
[3528]	1642	if [ $? -ne 0 ] ; then
[3522]	1643	LogAll "ERROR: Failed to copy $ISOLINUX to $MINDI_TMP/target/$tbc"
	1644	retval=$(($retval+1))
[3476]	1645	fi
[3522]	1646	fi
	1647	fi
[3476]	1648
[3887]	1649	if [ $KERNEL_IS_XEN = "yes" ]; then
	1650	FindMboot32Binary
	1651	cp $xenkernelpath $MINDI_TMP/target/xen.gz 2>> $LOGFILE
	1652	if [ $? -ne 0 ] ; then
	1653	LogAll "ERROR: Failed to copy $xenkernelpath to $MINDI_TMP/target/"
	1654	retval=$(($retval+1))
[747]	1655	fi
[3887]	1656	cp $MBOOTC32 $MINDI_TMP/target/$tbc/mboot.c32 2>> $LOGFILE
	1657	if [ $? -ne 0 ] ; then
	1658	LogAll "ERROR: Failed to copy $MBOOTC32 to $MINDI_TMP/target/$tbc"
	1659	retval=$(($retval+1))
	1660	fi
[3522]	1661	fi
[3499]	1662
[3522]	1663	MakeMessageFile $MINDI_TMP/target/$tbc \| cut -c1-80 > $MINDI_TMP/target/$tbc/message.txt
	1664
[3766]	1665	if [ _"$MONDO_SHARE" != _"" ]; then
[3522]	1666	cp -rf $MINDI_TMP/target/$tbc $MONDO_ROOT 2>> $LOGFILE
[3528]	1667	if [ $? -ne 0 ] ; then
[3522]	1668	LogAll "ERROR: Failed to copy $MINDI_TMP/target/$tbc to $MONDO_ROOT"
	1669	LogAll " Please check the target directory."
	1670	retval=$(($retval+1))
	1671	fi
	1672	if [ $KERNEL_IS_XEN = "yes" ]; then
	1673	cp -f $MINDI_TMP/target/xen.gz $MONDO_ROOT 2>> $LOGFILE
[3528]	1674	if [ $? -ne 0 ] ; then
[3522]	1675	LogAll "ERROR: Failed to copy $MINDI_TMP/target/xen.gz to $MONDO_ROOT"
	1676	LogAll " Please check the target directory."
	1677	retval=$(($retval+1))
[3476]	1678	fi
[747]	1679	fi
[3522]	1680	cp -f $MONDO_SHARE/autorun $MINDI_TMP/target 2>> $LOGFILE
[3527]	1681	cp -f $MINDI_TMP/target/vmlinuz $MONDO_ROOT 2>> $LOGFILE
[3528]	1682	if [ $? -ne 0 ] ; then
[3527]	1683	LogAll "ERROR: Failed to copy $MINDI_TMP/vmlinuz to $MONDO_ROOT"
	1684	LogAll " Please check the target directory."
	1685	retval=$(($retval+1))
	1686	fi
	1687	cp -f $MINDI_TMP/target/initrd.img $MONDO_ROOT 2>> $LOGFILE
[3528]	1688	if [ $? -ne 0 ] ; then
[3527]	1689	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MONDO_ROOT"
	1690	LogAll " Please check the target directory."
	1691	retval=$(($retval+1))
	1692	fi
[3522]	1693	fi
[747]	1694
[3522]	1695	if [ -f "$MINDI_TMP/$MRCFG" ]; then
	1696	cp -f $MINDI_TMP/$MRCFG $MINDI_TMP/target/tmp
	1697	fi
[747]	1698
[3522]	1699	LogFile "----------- target dir content -----------"
	1700	LogFile "------------------------------------------"
	1701	ls -lR $MINDI_TMP/target >> $LOGFILE
	1702	LogFile "------------------------------------------"
	1703	LogFile "----------- target dir sizes -------------"
	1704	du -sk $MINDI_TMP/target/* >> $LOGFILE
	1705	LogFile "------------------------------------------"
[3476]	1706
[3522]	1707	if [ "$retval" -ne "0" ] ; then
[3546]	1708	sync
[3522]	1709	umount $MINDI_TMP/target
	1710	LogAll "ERROR: Problems while creating boot media."
	1711	LogAll " Please unload some of your modules and try again."
[3692]	1712	Die " Try using another temporary directory instead of $MINDI_TMP"
[3522]	1713	fi
[3476]	1714
[3522]	1715	mkdir -p $MINDI_TMP/mpt
[1684]	1716
[3522]	1717	if [ "$target" = "USB" ]; then
	1718	LogAll "INFO: Transforming $USBDEVICE in a Bootable device"
	1719	LogAll "INFO: Checking $USBDEVICE"
[2924]	1720	$FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
[1684]	1721	if [ $? -ne 0 ]; then
[2963]	1722	LogAll "ERROR: Unable to access $USBDEVICE"
[3086]	1723	LogAll " Make sure your USB device is plugged in"
[2963]	1724	MindiExit -1
[1684]	1725	fi
[3149]	1726	# Some distro do auto mount at that point (Ubuntu)
[3522]	1727	LogAll "INFO: Unmounting $USBPART just in case"
[3546]	1728	sync
[1721]	1729	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[3419]	1730	if [ "$BOOT_TYPE" = "BIOS" ]; then
[3403]	1731	# If your key has no MBR it may cause an issue
	1732	# Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
	1733	if [ -r $MBRFILE ]; then
	1734	LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
[3522]	1735	dd if=$MBRFILE of=$USBDEVICE >> $LOGFILE 2>> $LOGFILE
[3403]	1736	else
	1737	LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
	1738	LogAll " on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
	1739	fi
[2855]	1740	fi
[3522]	1741	LogAll "INFO: Preparing $USBDEVICE"
[2851]	1742	cat > $MINDI_TMP/fdisk.txt << EOF
[2057]	1743	d
	1744	d
	1745	d
	1746	d
[1684]	1747	n
	1748	p
	1749	1
	1750
	1751
	1752	t
	1753	b
	1754	a
	1755	1
	1756	w
	1757	EOF
[2851]	1758	$FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
[1684]	1759	if [ $? -ne 0 ]; then
[2963]	1760	LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
[3086]	1761	LogAll " Make sure your USB device is plugged in"
[1684]	1762	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1763	MindiExit -1
	1764	fi
[2963]	1765	LogFile "fdisk build file"
	1766	LogFile "----------------"
[2851]	1767	cat $MINDI_TMP/fdisk.txt >> $LOGFILE
[2963]	1768	LogFile "----------------"
[2924]	1769	rm -f $MINDI_TMP/fdisk.txt
[3522]	1770	LogAll "INFO: The USB device $USBDEVICE now looks like this:"
[2190]	1771	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
[3006]	1772	# Calling kpartx in case devices were not created
[3033]	1773	if [ -x "/sbin/kpartx" ]; then
[3027]	1774	/sbin/kpartx -a $USBDEVICE
	1775	fi
[2461]	1776	# Some distro do auto mount at that point (Ubuntu)
[3522]	1777	LogAll "INFO: Unmounting $USBPART just in case again"
[3546]	1778	sync
[2461]	1779	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[3086]	1780	# Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
	1781	if [ "`which dmsetup`" != "" ]; then
[3368]	1782	block_id="`echo $USBPART \| sed 's/\/dev\///g'`"
	1783	if [[ "`dmsetup ls \| awk '{print $1}' \| grep $block_id`" != "" ]]; then
[3522]	1784	LogAll "INFO: Removing $block_id from device mapper."
[3368]	1785	sleep 1
	1786	dmsetup remove $block_id
	1787	fi
	1788	fi
[3522]	1789	part=$USBPART
	1790	mount_opt=""
	1791	else
	1792	# ISO image
	1793	part=$MINDI_TMP/mindi-bootroot.img
	1794	size=`du -sk $MINDI_TMP/target 2> /dev/null \| cut -f1`
	1795	# Adds 10 MB to allow for additional space
	1796	size=$(($size+10000))
	1797	LogAll "INFO: Creating a $size KB empty file for boot device of the ISO image"
	1798	dd if=/dev/zero of=$part bs=1k count=$size &> /dev/null \|\| Die "Cannot dd blank $part"
	1799	mount_opt="-o loop"
	1800	fi
	1801
	1802	LogAll "INFO: Creating a vfat filesystem on $part"
[3531]	1803
	1804	mkfs.vfat $part 2>&1 >> $LOGFILE
[3522]	1805	if [ $? -ne 0 ]; then
	1806	LogAll "ERROR: Unable to create a vfat filesystem on $part"
	1807	if [ "$target" = "USB" ]; then
	1808	LogAll " Make sure your USB device is plugged in and partitioned ($part must exist on it)"
[1684]	1809	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1810	fi
[3522]	1811	MindiExit -1
	1812	fi
[3532]	1813	if [ "$target" = "ISO" ]; then
	1814	if [ "$BOOT_TYPE" = "BIOS" ]; then
	1815	# syslinux should be run on a local file (doen't work through NFS Cf: #297)
	1816	# and run after the formating for versions > 6 it seems
	1817	syslinux $part >> $LOGFILE 2>> $LOGFILE
	1818	fi
	1819	fi
[3522]	1820	LogAll "INFO: Mounting $part on $MINDI_TMP/mpt"
	1821	mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
	1822	if [ $? -ne 0 ]; then
	1823	LogAll "ERROR: Unable to mount $part on $MINDI_TMP/mpt"
	1824	if [ "$target" = "USB" ]; then
	1825	LogAll " Make sure your USB device is plugged in, partitioned and formated ($part must exist on it)"
[1684]	1826	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1827	fi
[3522]	1828	MindiExit -1
	1829	fi
	1830
	1831	LogAll "INFO: Moving boot info on $MINDI_TMP/mpt"
	1832	mv $MINDI_TMP/target/* $MINDI_TMP/mpt
[3528]	1833	if [ $? -ne 0 ] ; then
[3522]	1834	LogFile "--------------------------------"
	1835	LogFile "INFO: Size of $MINDI_TMP/mpt:"
	1836	du -sk $MINDI_TMP/mpt/* >> $LOGFILE
	1837	LogFile "--------------------------------"
[3546]	1838	sync
[3522]	1839	umount $MINDI_TMP/mpt
	1840	LogAll "ERROR: Problems while creating boot media."
	1841	LogAll " Please unload some of your modules and try again."
[3692]	1842	Die " Try using another temporary directory instead of $MINDI_TMP"
[3522]	1843	fi
	1844
	1845	if [ "$target" = "ISO" ]; then
[3887]	1846	ISO_OPT="$ISO_OPT -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
	1847	if [ "$BOOT_TYPE" = "BIOS" ]; then
	1848	# BIOS
[3534]	1849	CMD="$ISO_CMD $ISO_OPT"
[3532]	1850	MakeISO
[3522]	1851	else
[3887]	1852	# UEFI
	1853	echo "$CMD" \| grep -q "xorriso"
	1854	if [ $? -eq 0 ]; then
	1855	XOV=`xorriso --version 2>&1 \| head -1 \| awk '{print $3}'`
	1856	XOVMAJ=`echo $XOV \| cut -d. -f1`
	1857	XOVMIN=`echo $XOV \| cut -d. -f2`
	1858	if [ $XOVMAJ -ge 1 && $XOVMIN -ge 3 ]; then
	1859	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -e images/mindi-bootroot.img -no-emul-boot"
[3534]	1860	else
[3887]	1861	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot --efi-boot images/mindi-bootroot.img"
[3534]	1862	fi
[3887]	1863	else
	1864	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
[3534]	1865	fi
[3522]	1866	fi
	1867	fi
	1868
[3546]	1869	# Avoids graphical tool to keep the FS mounted
	1870	sync
[3522]	1871	umount $MINDI_TMP/mpt \|\| Die "Unable to unmount $MINDI_TMP/mpt"
	1872
	1873	if [ "$target" = "ISO" ]; then
[3532]	1874	cp $part $MINDI_CACHE
[3887]	1875	if [ "$BOOT_TYPE" = "UEFI" ]; then
[3692]	1876	# Mount again !
	1877	LogAll "INFO: Re-Mounting $part on $MINDI_TMP/mpt"
	1878	mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
[3535]	1879	# We just need the EFI dir and the boot image for this case
[3536]	1880	mkdir -p $MINDI_TMP/mpt2 $MINDI_TMP/mpt/images $MINDI_TMP/mpt/archives
[3535]	1881	mount -o loop $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt2 2>> $LOGFILE
	1882	# We need again the kernel+initrd at the root for UEFI boot at least
	1883	cp -a $MINDI_TMP/mpt2/EFI $MINDI_TMP/mpt2/vmlinuz $MINDI_TMP/mpt2/initrd.img $MINDI_TMP/mpt
	1884	# We need the boot image now and what mindi needs at restore time as well
	1885	cp -a $MINDI_TMP/mpt2/images/all.tar.gz $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt/images
[3546]	1886	# Avoids graphical tool to keep the FS mounted
	1887	sync
[3535]	1888	umount $MINDI_TMP/mpt2
	1889	LogFile "----------- target dir content -----------"
	1890	LogFile "------------------------------------------"
	1891	ls -lR $MINDI_TMP/mpt >> $LOGFILE
	1892	LogFile "------------------------------------------"
[3532]	1893	MakeISO
[3522]	1894	fi
	1895	else
	1896	# USB
[3887]	1897	syslinux -v 2>&1 \| grep -q 4.02
	1898	if [ $? -eq 0 ]; then
	1899	# This buggy version of syslinux requires a call to --stupid and not -s
	1900	syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
	1901	res=$?
[1684]	1902	else
[3887]	1903	syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
	1904	res=$?
[1684]	1905	fi
[3887]	1906	if [ $res -ne 0 ] ; then
	1907	LogAll "----------- syslinux's errors --------------"
	1908	cat $MINDI_TMP/syslinux.log \|tee -a $LOGFILE
	1909	LogAll "------------------------------------------"
	1910	LogAll "ERROR: Failed to create USB image."
	1911	else
	1912	LogFile "INFO: Created bootable USB image on $USBDEVICE"
	1913	fi
	1914	rm -f $MINDI_TMP/syslinux.log
[3522]	1915	fi
[1684]	1916	}
	1917
	1918
[3522]	1919	OfferToMakeBootableUSB() {
	1920
	1921	local i files
	1922
	1923	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
	1924	echo -en "\nShall I make a bootable USB device ? (y/[n]) "
	1925	read i
	1926	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1927	if [ "$USBDEVICE" = "" ]; then
	1928	echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
	1929	read dev
	1930	USBDEVICE=$dev
	1931	fi
	1932	echo "WARNING: This will erase all content on $USBDEVICE"
	1933	echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
	1934	read i
	1935	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1936	else
	1937	if [ "$PROMPT_MAKE_USB_IMAGE" = "no" ] && [ _"$MONDO_SHARE" = _"" ] && [ "$USBDEVICE" = "" ]; then
	1938	Die "No USBDEVICE environment variable declared, aborting"
	1939	fi
	1940	fi
	1941	USBPART="${USBDEVICE}1"
	1942
	1943	MakeBootableDevice USB
	1944	}
	1945
	1946
	1947	OfferToMakeBootableISO() {
	1948
	1949	local i files
	1950
	1951	if [ -z "$ISO_CMD" ]; then
	1952	LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
	1953	return
	1954	fi
	1955
	1956	if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
	1957	echo -en "\nShall I make a bootable CD image? (y/[n]) "
	1958	read i
	1959	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1960	fi
	1961
	1962	MakeBootableDevice ISO
	1963	}
	1964
	1965
[747]	1966	MakeMessageFile() {
[2292]	1967
	1968	if [ -x "/bin/lsb_release" ]; then
	1969	DESC=`/bin/lsb_release -d \| cut -d: -f2 \| sed "s/[ \t]*//"`
[3173]	1970	elif [ -r /etc/arch-release ]; then # this code must be written before /etc/issue test to avoid errors
	1971	DESC="Arch Linux"
	1972	if [ -r /var/log/pacman.log ]; then
	1973	# there are no releases but we can get the last system upgrade
	1974	# Output example: Arch Linux [2011-03-03 01:39]
	1975	DESC="$DESC $(tac /var/log/pacman.log \| grep -m1 'full system upgrade' \| cut -d']' -f1)]"
[2754]	1976	fi
[3426]	1977	elif [ -x "/etc/os-release" ]; then
	1978	DESC=`grep PRETTY_NAME /etc/os-release \| cut -d= -f2`
	1979	elif [ -x "/usr/bin/pbdistrocheck" ]; then
	1980	# For pb >= 0.9.8
	1981	DESC=`/usr/bin/pbdistrocheck -s \| cut -d, -f1-4 \| sed 's/,/-/g'`
[2732]	1982	elif [ -r /etc/issue.net ]; then
[2731]	1983	DESC=`head -1 /etc/issue.net`
[2732]	1984	elif [ -r /etc/issue ]; then
[2731]	1985	DESC=`head -1 /etc/issue`
[747]	1986	else
[2731]	1987	DESC="Unknown desc"
[747]	1988	fi
[3781]	1989	# Avoids issues in the following sed
	1990	DESC=`echo ${DESC} \| tr '/' ' '`
[2292]	1991	sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt \| sed "s/KKKKK/Kernel $KERVER/" \| sed "s/AAAAA/on a $ARCH architecture/" \| sed "s/TTTTT/`LC_TIME=C date`/" \| sed "s/MMMMM/`hostname`/" \| sed "s/DDDDD/$DESC/"
[1885]	1992	if [ _"$MONDO_SHARE" != _"" ]; then
	1993	if [ "$CDRECOVERY" != "yes" ] ; then
[3270]	1994	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3281]	1995	echo -en "Press <0eenter07> for 0cnetwork restore07\n"
[3278]	1996	echo -en "$BOOT_MEDIA_MESSAGE"
[1885]	1997	elif [ ! "$MINDI_TMP" ] ; then
[3522]	1998	echo -en "FYI, this is _not_ a MondoRescue CD.\n"
	1999	if [ -e "$MINDI_LIB/memtest.img" ] ; then
[3653]	2000	echo -en "Type 'memtest' <Enter> to test your machine's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
[3522]	2001	fi
[1885]	2002	else
	2003	echo -en "$BOOT_MEDIA_MESSAGE"
[747]	2004	fi
[1983]	2005	else
	2006	echo -en "\
[747]	2007	To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
	2008	CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
[1983]	2009	fi
[747]	2010	fi
[3173]	2011
	2012	# Also create the other help screens
	2013	head -24 $MINDI_CONF/README.bootparam \| cut -c1-80 > $1/boot1.txt
	2014	head -48 $MINDI_CONF/README.bootparam \| tail -24 \| cut -c1-80 > $1/boot2.txt
	2015	head -24 $MINDI_CONF/README.pxe \| cut -c1-80 > $1/pxe.txt
[747]	2016	}
	2017
	2018
[1983]	2019	MakeBootConfFile() {
[1885]	2020	local options i ooo
[747]	2021	options=""
[3887]	2022	# Type of boot file (grub2 or syslinux/isolinux)
[1983]	2023	type=$1
[3887]	2024	if [ "$type" = "grub2" ]; then
[1983]	2025	sep="="
[3398]	2026	sepdef="="
[1983]	2027	else
	2028	sep=" "
[3398]	2029	sepdef=" "
[1983]	2030	fi
[925]	2031
[1983]	2032	# Generic header for conf file
[3887]	2033	if [ "$type" = "grub" ]; then
[3398]	2034	echo -en "pause Press a key when ready to restore\n"
[3518]	2035	elif [ "$type" = "grub2" ]; then
	2036	echo -en "set "
[3398]	2037	else
[3535]	2038	# syslinux family
[3173]	2039	echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
[925]	2040	fi
[1983]	2041
	2042	# Compute which default option to boot from
[3398]	2043	echo -en "default${sepdef}"
[747]	2044	if [ "$CDRECOVERY" = "yes" ] ; then
[3398]	2045	if [ "$type" = "grub" ]; then
[3430]	2046	# TODO: Which num ???
[3398]	2047	echo -en "0\n"
	2048	else
	2049	echo -en "RESTORE\n"
	2050	fi
[1983]	2051	# In case it's mondoarchive
[1885]	2052	elif [ _"$MONDO_SHARE" != _"" ]; then
[3270]	2053	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3398]	2054	if [ "$type" = "grub" ]; then
	2055	echo -en "3\n"
	2056	else
	2057	echo -en "iso\n"
	2058	fi
[747]	2059	else
[3398]	2060	if [ "$type" = "grub" ]; then
	2061	echo -en "1\n"
	2062	else
	2063	echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
	2064	fi
[747]	2065	fi
	2066	else
[3398]	2067	if [ "$type" = "grub" ]; then
	2068	echo -en "0\n"
	2069	else
	2070	echo -en "expert\n"
	2071	fi
[747]	2072	fi
	2073
[1983]	2074	# Handle timeout
[3588]	2075	if [ "$type" = "grub2" ]; then
	2076	seppref="set "
	2077	else
	2078	seppref=""
[3518]	2079	fi
[3587]	2080	if [ "$CDRECOVERY" = "yes" ] ; then
[3588]	2081	echo -en "${seppref}timeout${sep}10000\n"
[3587]	2082	else
[3588]	2083	echo -en "${seppref}timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
[747]	2084	fi
	2085	echo -en "\n"
[1983]	2086
[2124]	2087	# prepare which labels will be generated
[747]	2088	if [ "$CDRECOVERY" = "yes" ] ; then
[925]	2089	options="RESTORE expert"
[1885]	2090	else
	2091	if [ _"$MONDO_SHARE" != _"" ]; then
[2344]	2092	options="interactive expert compare iso nuke isonuke"
[747]	2093	else
	2094	options="expert"
[925]	2095	fi
[747]	2096	fi
[1983]	2097
	2098	# Generate rest of conf file
[747]	2099	for i in $options ; do
[925]	2100	ooo=$i
[3111]	2101	[ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
[3887]	2102	if [ "$type" = "grub" ]; then
[3692]	2103	outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
[3518]	2104	elif [ "$type" = "grub2" ]; then
[3535]	2105	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2106	lorder="linuxefi"
	2107	iorder="initrdefi"
	2108	else
	2109	lorder="linux"
	2110	iorder="initrd"
	2111	fi
[3692]	2112	outstr="menuentry '$i' {\n\tinsmod all_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod part_gpt\n\tinsmod ext2\n\tinsmod xfs\n\techo 'Loading kernel...'\n\t$lorder /vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\techo 'Loading ramdisk...'\n\t$iorder /initrd.img\n}\n"
[925]	2113	else
[2073]	2114	ps="/"
[2629]	2115	if [ $KERNEL_IS_XEN = "no" ]; then
[3692]	2116	outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
[2629]	2117	else
[3692]	2118	outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
[2629]	2119	fi
[925]	2120	fi
[1885]	2121	echo -en "$outstr"
[747]	2122	done
[1983]	2123	if [ -e "$MINDI_LIB/memtest.img" ] ; then
[3887]	2124	if [ "$type" = "grub" ]; then
[3415]	2125	echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
[3518]	2126	elif [ "$type" = "grub2" ]; then
	2127	echo -en "menuentry 'memtest' {\n\tload_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod xfs\n\tlinux /memtest\n\tinitrd /memtest.img\n}\n"
[1983]	2128	else
[2073]	2129	ps="/"
	2130	if [ "$type" = "syslinux" ]; then
	2131	ps=""
	2132	fi
	2133	echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
	2134	echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
[1983]	2135	fi
	2136	fi
[747]	2137	}
	2138
[2006]	2139	ParseModprobeForIncludes() {
	2140	local MODPROBE_CONF mpincfile includes include
	2141
	2142	MODPROBE_CONF=/etc/modprobe.conf
	2143	mpincfile=$1
	2144	touch $mpincfile
	2145	if [ -a $MODPROBE_CONF ]; then
[2431]	2146	includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF\|sort -u)
[2006]	2147	if [ -n "$includes" ]; then
	2148	for include in $includes
	2149	do
	2150	if [ -a "$include" ]; then
	2151	echo $include >> $mpincfile
	2152	fi
	2153	done
	2154	fi
	2155	fi
	2156	}
	2157
[3585]	2158	PrepareBootDir() {
[2006]	2159
[3692]	2160	local detect
	2161	# Needs a bigdir variable setup before calling it
[3585]	2162
[3888]	2163	# copy lilo/isolinux/grub/whatever stuff into it as well
[3585]	2164	# to get it on the media (in addition to the boot part
	2165	# and also to support UEFI boot mechanism
	2166	if [ "$boottype" != "" ]; then
	2167	detect="no"
	2168	else
	2169	detect="yes"
	2170	boottype=syslinux
	2171	fi
	2172	bootdir=$bigdir/$boottype
	2173	bootconf="$bootdir/$boottype.cfg"
	2174	mkdir -p $bootdir
	2175	FindLdlinux32Binary
	2176
[3725]	2177	dname=`pbdistrocheck \| grep -E '^Name:' \| cut -d':' -f2`
[3778]	2178	dver=`pbdistrocheck \| grep -E '^Ver:' \| cut -d':' -f2 \| cut -d'.' -f1`
[3725]	2179
[3585]	2180	if [ "$BOOT_TYPE" != "BIOS" ]; then
	2181	if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
	2182	LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
	2183	MindiExit -1
	2184	fi
	2185
	2186	mountefi=0
[3887]	2187	# UEFI
[3585]	2188	# TODO: names are hard-coded for now
	2189	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2190	# UEFI
	2191	efidir=$bigdir/EFI/BOOT
	2192	# Auto-detection if needed
	2193	if [ $detect = "yes" ]; then
	2194
	2195	# mount /boot/efi if needed
	2196	df -T \| grep /boot/efi \| grep -qE 'vfat'
	2197	if [ $? -ne 0 ]; then
	2198	mount /boot/efi
	2199	if [ $? -ne 0 ]; then
[3889]	2200	echo "ERROR: You have to mount your UEFI partition when using mindi"
[3585]	2201	MindiExit -1
	2202	fi
	2203	mountefi=1
	2204	fi
	2205
	2206	# On RHEL6 grub works
[3602]	2207	if [ $dname = "rhel" -o $dname = "centos" -o $dname = "oel" ] && [ $dver = "6" ]; then
[3585]	2208	boottype=grub
[3652]	2209	elif [ $dname = "rhel" -o $dname = "centos" -o $dname = "oel" ] && [ $dver -ge 7 ]; then
[3585]	2210	boottype=grub2
[3652]	2211	elif [ $dname = "fedora" ] && [ $dver -ge 20 ]; then
[3609]	2212	boottype=grub2
[3710]	2213	elif [ $dname = "sles" ] && [ $dver -ge 12 ]; then
	2214	boottype=grub2
[3652]	2215	elif [ $dname = "debian" ] && [ $dver -ge 8 ]; then
[3585]	2216	boottype=grub2
[3778]	2217	elif [ $dname = "ubuntu" ] && [ $dver -ge 16 ]; then
	2218	boottype=grub2
[3585]	2219	else
	2220	# Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
	2221	boottype=syslinux
	2222	fi
	2223	fi
	2224	if [ "$boottype" = "syslinux" ]; then
	2225	if [ ! "$bootbin" ]; then
	2226	FindSyslinux64EFI
	2227	bootbin=$SYSLINUX64EFI
	2228	fi
	2229	bootconf="$efidir/syslinux.cfg"
	2230	elif [ "$boottype" = "grub" ]; then
	2231	if [ ! "$bootbin" ]; then
	2232	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
	2233	fi
	2234	bootconf="$efidir/BOOTX64.conf"
	2235	elif [ "$boottype" = "grub2" ]; then
	2236	if [ ! "$bootbin" ]; then
	2237	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
	2238	fi
	2239	bootconf="$efidir/grub.cfg"
	2240	fi
	2241
	2242	# Depending on the arch, the target boot file is different
	2243	if [ "$ARCH" = "x86_64" ] ; then
	2244	tgbin="BOOTX64.efi"
	2245	elif [ "$ARCH" = "armv8" ]; then
	2246	tgbin="BOOTAA64.efi"
	2247	else
	2248	# i?386
	2249	tgbin="BOOTIA32"
	2250	fi
	2251	else
[3887]	2252	LogAll "ERROR: UNSUPPORTED $BOOT_TYPE BOOT_TYPE. Please report upstream"
	2253	MindiExit -1
[3585]	2254	fi
	2255	LogAll "INFO: Found $boottype boot type"
	2256	mkdir -p $efidir
	2257	cp $bootbin $efidir/$tgbin
	2258
	2259	if [ $mountefi -eq 1 ]; then
	2260	umount /boot/efi 2>&1 > /dev/null
	2261	fi
	2262
	2263	if [ $boottype = "syslinux" ]; then
	2264	FindLdlinuxe64Binary
	2265	if [ -e "$LDLINUXE64" ]; then
	2266	LogFile "INFO: Copying $LDLINUXE64 to $efidir"
	2267	cp $LDLINUXE64 $efidir 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
[3780]	2268	cp $(dirname $LDLINUXE64)/libutil.c32 $efidir 2>> $LOGFILE \|\| Die "Cannot copy libutil.c32 to $efidir). Did you run out of disk space?"
	2269	if [ -e $(dirname $LDLINUXE64)/isolinux.c32 ]; then
	2270	cp $(dirname $LDLINUXE64)/isolinux.c32 $efidir 2>> $LOGFILE \|\| Die "Cannot copy isolinux.c32 to $efidir). Did you run out of disk space?"
[3585]	2271	fi
	2272	fi
	2273	fi
	2274	# tgdir for syslinux
	2275	tgdir=$bigdir/EFI
	2276	else
	2277	# tgdir for syslinux
	2278	tgdir=$bootdir
	2279	fi
	2280	# In all cases prepare syslinux content for BIOS mode
	2281	# so that we can have multi boot mode media BIOS+UEFI
	2282	# Useful for syslinux 5.x
	2283	if [ -e "$LDLINUXC32" ]; then
	2284	LogFile "INFO: Copying $LDLINUXC32 to $tgdir"
	2285	cp $LDLINUXC32 "$tgdir" 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXC32 to $tgdir. Did you run out of disk space?"
	2286	fi
[3780]	2287	if [ -e $(dirname $LDLINUXC32)/isolinux.c32 ]; then
[3585]	2288	LogFile "INFO: Copying isolinux.c32 to $tgdir"
[3780]	2289	cp $(dirname $LDLINUXC32)/isolinux.c32 $tgdir 2>> $LOGFILE \|\| Die "Cannot copy isolinux.c32 to $tgdir). Did you run out of disk space?"
[3585]	2290	fi
	2291
	2292	MakeBootConfFile $boottype > $bootconf
	2293	LogFile "Boot Conf file $bootconf content is:"
	2294	LogFile "------------------------------------"
	2295	cat $bootconf >> $LOGFILE
	2296	LogFile "------------------------------------"
	2297	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2298	# Also generate the syslinux conf
	2299	MakeBootConfFile syslinux > "$bigdir/EFI/syslinux.cfg"
	2300	LogFile "Boot Conf file $bigdir/EFI/syslinux.cfg content is:"
	2301	LogFile "---------------------------------------------------"
	2302	cat $bigdir/EFI/syslinux.cfg >> $LOGFILE
	2303	LogFile "---------------------------------------------------"
[3725]	2304	if [ $dname = "debian" ] && [ $dver -ge 8 ]; then
	2305	# In that case it seems we need conf file at the root of the media
	2306	cp -a $bigdir/EFI/* $bigdir
	2307	fi
[3585]	2308	fi
	2309
	2310	}
	2311
[3692]	2312	PrepareBigDirTar() {
[3585]	2313	echo -en "INFO: Tarring and zipping the data content..."
	2314	(cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log \| gzip -9 > $MINDI_CACHE/all.tar.gz \|\| LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
	2315	LogFile "Size of the data content"
	2316	LogFile "------------------------"
	2317	du -sk $MINDI_CACHE/*gz >> $LOGFILE
	2318	LogFile "------------------------"
	2319	echo -e "$DONE"
	2320
	2321	}
	2322
[3692]	2323	CleanBigDir() {
	2324	[ "$bigdir" != "/" ] && echo $bigdir \| grep -vq $MINDI_TMP && rm -rf $bigdir
	2325	}
[747]	2326
[3692]	2327	PrepareBigDir() {
[3887]	2328	local needlist diskdir res i j k lines lfiles includefile ti
[3692]	2329
[3407]	2330	rm -f $MINDI_CACHE/mindi.iso
[3887]	2331	needlist=$MINDI_TMP/what-we-need.txt
	2332	mkdir -p $bigdir/usr/bin
	2333	mkdir -p $bigdir/usr/sbin
	2334	includefile=$MINDI_TMP/$$.includefile.txt
[747]	2335
[3887]	2336	lfiles=`ls $DEPLIST_DIR/* \| grep -v /minimal`
[2409]	2337	if [ -e "$DEPLIST_FILE" ]; then
[3149]	2338	lfiles="$DEPLIST_FILE $lfiles"
[2409]	2339	fi
[3887]	2340	lines=`grep -vx " #." $lfiles \| grep -vx "" \| wc -l`
[2006]	2341	ParseModprobeForIncludes $includefile
[3887]	2342	lines=$(($lines+`cat $includefile \| wc -l`))
	2343	cat $lfiles $includefile \| GenerateGiantDependencyList $needlist $lines
	2344	res=$?
[2006]	2345	rm -f $includefile
[3887]	2346	ListKernelModulePaths >> $needlist
	2347	if [ "$res" -ne "0" ] ; then
	2348	Die "You have $res files present in dependency list\nbut absent from filesystem."
	2349	fi
	2350	mkdir -p $bigdir/tmp
[1885]	2351	if [ _"$MONDO_SHARE" != _"" ]; then
[3430]	2352	# TODO: no reason to have the cfg file stored twice
[3278]	2353	MakeMondoConfigFile $MINDI_TMP/$MRCFG
	2354	cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
[747]	2355	fi
[3281]	2356
	2357	# Needs to be done after the MRCFG creation
	2358	FindAndAddUserKeyboardMappingFile
	2359
[3166]	2360	[ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
[3887]	2361	DropOptimizedLibraries $needlist $bigdir
	2362	echo -en "INFO: Assembling dependency files"
[747]	2363
[3887]	2364	CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist` 1
	2365	rm -f $needlist
	2366	echo -e "$DONE"
	2367
[925]	2368	# also copy io.sys and msdos.sys, if we can find them
[747]	2369	for i in `mount \| cut -d' ' -f3` ; do
[925]	2370	for j in io.sys msdos.sys ; do
[963]	2371	[ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
[925]	2372	done
[747]	2373	done
	2374
[925]	2375	# master boot record, too
[940]	2376	i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
[3403]	2377	if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
[3149]	2378	LogAll "INFO: Backing up $i's MBR"
[925]	2379	dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
	2380	sleep 1
	2381	sync
	2382	j=$i
	2383	[ -h "$j" ] && j=`readlink -f $j`
[3149]	2384	LogAll "INFO: Creating /dev/boot_device ($j)"
[925]	2385	mkdir -p $bigdir/dev
[2089]	2386	cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE \|\| Die "Unable to create /dev/boot_device on ramdisk"
[747]	2387	fi
	2388
[1983]	2389	# Get terminfo content
[3769]	2390	for ti in usr/share/terminfo/l usr/share/terminfo/x lib/terminfo/l lib/terminfo/x ; do
	2391	if [ -d /$ti ]; then
	2392	mkdir -p $bigdir/$ti
	2393	cp -Rdf /$ti/* $bigdir/$ti 2>> $LOGFILE \|\| LogAll "ERROR: issue copying terminfo"
	2394	fi
	2395	done
[1764]	2396	if [ -e "$MONDO_SHARE/restore-scripts" ]; then
[3543]	2397	cp -Rdf $MONDO_SHARE/restore-scripts/mondo/* $bigdir/usr/bin 2>> $LOGFILE
[3528]	2398	[ $? -ne 0 ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
[3543]	2399	cp -Rdf $MONDO_SHARE/restore-scripts/etc/* $bigdir/etc 2>> $LOGFILE
[747]	2400	fi
[3766]	2401	if [ -d "/lib/dev-state" ]; then
[3542]	2402	cp -a /lib/dev-state $bigdir/lib/ 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
[2290]	2403	fi
[940]	2404	MakeMountlist $MINDI_TMP/mountlist.txt
[2432]	2405	CheckMountlist $MINDI_TMP/mountlist.txt
[1902]	2406	mkdir -p $bigdir/tmp
[2092]	2407	cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE \|\| Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
[3748]	2408	for i in create-btrfs-subvol mount-btrfs-subvol umount-btrfs-subvol; do
	2409	if [ -r $MINDI_TMP/$i ]; then
	2410	cp -f $MINDI_TMP/$i $bigdir/tmp/ 2>> $LOGFILE \|\| Die "Cannot copy subvol script $MINDI_TMP/$i to data disk"
	2411	fi
	2412	done
[1885]	2413	if [ _"$MONDO_SHARE" != _"" ]; then
[1902]	2414	cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
[1885]	2415	fi
[2032]	2416	if [ $LVM != "false" ]; then
[3766]	2417	$MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
[3528]	2418	if [ $? -ne 0 ]; then
[2032]	2419	LVM="false"
	2420	rm -f $bigdir/tmp/i-want-my-lvm
[2552]	2421	else
[2963]	2422	LogFile "Your i-want-my-lvm file content is:"
	2423	LogFile "-----------------------------------"
[2552]	2424	cat $bigdir/tmp/i-want-my-lvm >> $LOGFILE
[2963]	2425	LogFile "-----------------------------------"
[2032]	2426	fi
	2427	fi
[3522]	2428	LogFile "INFO: Your mountlist.txt file content is:"
[2963]	2429	LogFile "-----------------------------------"
[1902]	2430	cat $bigdir/tmp/mountlist.txt >> $LOGFILE
[2963]	2431	LogFile "-----------------------------------"
[2432]	2432
[2092]	2433	echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
	2434	echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
[1902]	2435	if [ _"$MONDO_SHARE" != _"" ]; then
	2436	for q in filelist.full.gz biggielist.txt ; do
	2437	[ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
	2438	cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
	2439	done
[3746]	2440	for q in $MBRFILE $GPTMBRFILE; do
	2441	if [ -r $q ]; then
	2442	cp -a $q $bigdir/tmp 2>> $LOGFILE
	2443	else
	2444	LogFile "Unable to copy $q to bigdir. May be unable to restore MBR"
	2445	fi
	2446	done
[1902]	2447	fi
	2448
[3585]	2449	PrepareBootDir
[3692]	2450
[747]	2451	}
	2452
	2453
	2454	Prompt() {
	2455	echo -en "$1"
	2456	read line
	2457	}
	2458
	2459
	2460	ReadLine() {
	2461	local i incoming
	2462	read incoming
	2463	i=0
	2464	while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
[925]	2465	i=$(($i+1))
	2466	read incoming
[747]	2467	done
	2468	echo "$incoming"
	2469	}
	2470
	2471
	2472	SizeOfPartition() {
	2473	local devpath drive res stub
	2474	device=$1
[2917]	2475	if [ "`echo "$device" \| grep -E "^/dev/"`" = "" ] ; then
	2476	Die "Cannot find $device's size - is your /etc/fstab sane?"
	2477	fi
[747]	2478	if [ "`echo "$device" \| grep -F "/dev/md"`" != "" ] ; then
[925]	2479	res=`SizeOfRaidPartition $device`
	2480	[ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
	2481	echo "$res"
	2482	return 0
[747]	2483	fi
[925]	2484	# patch from Bill <bill@iwizard.biz> - 2003/08/25
[960]	2485	res=`$FDISK -s $device 2>> $LOGFILE`
[925]	2486	# end patch
[2448]	2487	# take only the first in case of multiple mount (cifs, nfs, ...)
	2488	[ "$res" = "" ] && res=`df -k -P -x supermount \| tr -s '\t' ' ' \| grep -F "$device " \| cut -d' ' -f2 \| head -1`
[747]	2489	[ "$res" = "" ] && res="-1"
	2490	echo $res
	2491	return 0
	2492	}
	2493
	2494
	2495	SizeOfRaidPartition() {
	2496	local real_dev smallest_size silly tmp
	2497
	2498	silly=999999999
	2499	smallest_size=$silly
	2500
	2501	for real_dev in `GetRaidDevMembers $1` ; do
[925]	2502	tmp=`SizeOfPartition $real_dev`
	2503	[ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
[747]	2504	done
	2505
	2506	if [ "$smallest_size" = "$silly" ] ; then
[925]	2507	echo "-1"
	2508	return 1
[747]	2509	else
[925]	2510	echo "$smallest_size"
	2511	return 0
[747]	2512	fi
	2513	}
	2514
	2515
	2516	StripExecutable()
	2517	{
	2518	local tmpfile
[925]	2519
[940]	2520	tmpfile=$MINDI_TMP/stripped.$$.dat
[747]	2521	[ -d "$1" ] \|\| [ -h "$1" ] && return
[963]	2522	cp -f $1 $tmpfile 2>> $LOGFILE
[747]	2523	strip $tmpfile 2> /dev/null
[3528]	2524	if [ $? -eq 0 ] ; then
[963]	2525	cp -f $tmpfile $1 2>> $LOGFILE
[2963]	2526	LogFile "INFO: Stripped binary $2"
[747]	2527	fi
	2528	rm -f $tmpfile
	2529	}
	2530
[2292]	2531	KernelVer() {
	2532	local fkern_ver fname
[747]	2533
[2292]	2534	fname=$1
	2535	file $fname \| grep -q gzip
[3528]	2536	if [ $? -eq 0 ] ; then
	2537	fkern_ver=`gzip -cd $fname \| strings 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
[2292]	2538	else
[3528]	2539	fkern_ver=`strings $fname 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
[2292]	2540	fi
	2541	echo "$fkern_ver"
	2542	}
	2543
	2544
[3887]	2545	# WARNING: This function should just echo the final result !!!
[2880]	2546	#
[747]	2547	TryToFindKernelPath() {
[2880]	2548	local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
[925]	2549
[2292]	2550	we_want_version=$KERVERRUN
[747]	2551	possible_kernels=""
	2552	duff_kernels=""
[2880]	2553	output=""
[3887]	2554	root="/"
[2681]	2555	# See if we're booted from a Xen kernel
[2889]	2556	# From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
	2557	if [ -f /proc/xen/capabilities ]; then
[2681]	2558	# It's a Xen kernel
	2559	KERNEL_IS_XEN="yes"
[2963]	2560	LogFile "INFO: It's a Xen kernel..."
[2681]	2561	fi
	2562
[3122]	2563	for fname in `find $root -maxdepth 2 -type f \| grep -Ei 'lin\|kern\|xen' \| grep -Ev '^/proc/\|^/net/\|^/mnt\|^/lib\|^/lib64\|^/bin\|^/sbin\|^/usr\|^/tmp'` ; do
[925]	2564	[ ! -e "$fname" ] && continue
[747]	2565	[ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
[2292]	2566	fkern_ver=`KernelVer $fname`
[747]	2567	[ "$fkern_ver" = "" ] && continue
	2568	[ "`echo "$fkern_ver" \|grep -F "$we_want_version "`" = "" ] && continue
[925]	2569	[ -f "$fname" ] \|\| continue
	2570	[ -h "$fname" ] && continue
	2571	kdate=`uname -v \| $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' \| $AWK '{print $NF;}'`
	2572	file $fname \| grep -q gzip
[3528]	2573	if [ $? -eq 0 ] ; then
[925]	2574	if [ "`gzip -cd $fname \| strings 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[2880]	2575	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
[925]	2576	duff_kernels="$fname $duff_kernels"
	2577	else
[747]	2578	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2579	possible_kernels="$fname $possible_kernels"
[925]	2580	fi
[747]	2581	else
[925]	2582	if [ "`strings $fname 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[2880]	2583	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
[925]	2584	duff_kernels="$fname $duff_kernels"
	2585	else
[747]	2586	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2587	possible_kernels="$fname $possible_kernels"
[925]	2588	fi
[747]	2589	fi
	2590	done
	2591	if [ ! "$possible_kernels" ] && uname -a \| grep Knoppix > /dev/null ; then
[3535]	2592	possible_kernels=`find /boot/vmlinuz-[2-9].* \| tail -n1`
[747]	2593	fi
	2594	if [ ! "$possible_kernels" ] ; then
[3149]	2595	LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
[747]	2596	possible_kernels="$duff_kernels"
	2597	if [ ! "$possible_kernels" ] ; then
[3149]	2598	LogAll "INFO: Sorry, no duff kernels either"
[747]	2599	else
[3149]	2600	LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
	2601	LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
[747]	2602	fi
	2603	fi
[2681]	2604	if [ $KERNEL_IS_XEN = "yes" ]; then
	2605	possible_xenkernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -i "xen" \| sort -u \| tr '\n' ' '`
	2606	noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
	2607	fi
[2829]	2608	possible_kernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -vi "xen" \| sort -u \| tr '\n' ' '`
	2609	noof_kernels=`CountItemsIn "$possible_kernels"`
[747]	2610	if [ "$noof_kernels" -eq "0" ] ; then
[3149]	2611	LogAll "Could not find your kernel."
[925]	2612	if [ -e "/boot/vmlinuz" ] ; then
[3149]	2613	LogAll "INFO: Using /boot/vmlinuz as a last resort."
[925]	2614	output=/boot/vmlinuz
[747]	2615	else
[925]	2616	output=""
	2617	fi
[747]	2618	elif [ "$noof_kernels" -eq "1" ] ; then
[2880]	2619	kp=`echo "$possible_kernels" \| sed s/' '//`
[2963]	2620	LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
[2880]	2621	output="$kp"
[747]	2622	else
	2623	for i in $possible_kernels ; do
[2880]	2624	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
[3149]	2625	LogAll "INFO: OK, I used my initiative and found that "
	2626	LogAll "INFO: $i is probably your kernel. "
[925]	2627	output="$i"
[2858]	2628	break
[925]	2629	fi
[747]	2630	done
[2858]	2631	if [ ! -n "$output" ]; then
[2880]	2632	if [ "`echo " $possible_kernels " \| grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
[2681]	2633	output=/boot/vmlinuz
[2963]	2634	LogFile "INFO: Schlomo, this one's for you."
[2681]	2635	else
[3651]	2636	LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
[2963]	2637	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
[3651]	2638	LogFile "INFO: $possible_kernels"
	2639	output=""
[2681]	2640	fi
	2641	fi
	2642	fi
	2643	if [ $KERNEL_IS_XEN = "yes" ]; then
	2644	if [ "$noof_xenkernels" -eq "0" ]; then
	2645	xenkernelpath=""
	2646	elif [ "$noof_xenkernels" -eq "1" ]; then
	2647	xenkernelpath=`echo "$possible_xenkernels" \| sed s/' '//`
[2963]	2648	LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
[925]	2649	else
[2681]	2650	for i in $possible_xenkernels ; do
[2880]	2651	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
[2963]	2652	LogFile "INFO: OK, I used my initiative and found that "
	2653	LogFile "INFO: $i is probably your Xen kernel. "
[2681]	2654	xenkernelpath="$i"
[2858]	2655	break
[2681]	2656	fi
	2657	done
[2858]	2658	if [ ! -n "$xenkernelpath" ]; then
[2681]	2659	new_possible_xenkernels=`echo "$possible_xenkernels" \| tr -s ' ' '\n' \| grep -E "^/boot" \| sort -u \| tr '\n' ' '`
	2660	if [ ! -n "$new_possible_xenkernels" ]; then
	2661	xenkernelpath=`echo $new_possible_xenkernels \| tr -s ' ' '\n' \| head -1`
[2963]	2662	LogFile "INFO: Using $xenkernelpath"
[2681]	2663	else
[2963]	2664	LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
	2665	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
	2666	LogFile "INFO: $possible_xenkernels"
[2880]	2667	output=""
[2681]	2668	xenkernelpath=`echo $possible_xenkernels \| tr -s ' ' '\n' \| head -1`
[2963]	2669	LogFile "INFO: Using $xenkernelpath"
[2681]	2670	fi
	2671	fi
[925]	2672	fi
[2681]	2673	if [[ -z "$xenkernelpath" \|\| ! -f "$xenkernelpath" ]]; then
	2674	Die "Cannot find Xen kernel $xenkernelpath, aborting"
	2675	fi
[747]	2676	fi
[3357]	2677	#LogAll "TryToFindKernelPath found $output"
[2681]	2678	echo "$output"
[747]	2679	}
	2680
[3660]	2681	CopyFromConf() {
[747]	2682
[3660]	2683	conf=$1
[3692]	2684	mp=$2
[3887]	2685	echo -en "INFO: Gathering dependencies of $conf.conf..."
	2686	LogFile "INFO: Gathering dependencies of $conf.conf..."
	2687	lis2=`grep -Ev '^#' $DEPLIST_DIR/$conf.conf \| sort -u`
[3660]	2688	noof_lines=`echo $lis2 \| wc -w`
	2689	progress=0
	2690	# Get only the files which exist in that list
	2691	# and potentially their symlink structure
[3661]	2692	# put apart directories for later handling
[3660]	2693	for f in $lis2; do
	2694	if [ -d $f ]; then
[3661]	2695	for g in `find $f`; do
[3887]	2696	echo $g >> $MINDI_TMP/$conf.lis
	2697	LocateDeps $g >> $MINDI_TMP/$conf.lis2
[3660]	2698	done
	2699	lis3="$lis3 $f"
[3661]	2700	else
[3660]	2701	if [ -r $f ]; then
[3887]	2702	echo $f >> $MINDI_TMP/$conf.lis
	2703	LocateDeps $f >> $MINDI_TMP/$conf.lis2
[3660]	2704	fi
	2705	fi
	2706	progress=$(($progress+1))
	2707	LogProgress $progress $noof_lines
	2708	done
[3887]	2709	echo -e "$DONE"
	2710	LogAll "INFO: Processing all dependencies links for $conf.conf..."
[3662]	2711	# And their deps except dirs
[3887]	2712	lines=`sort -u $MINDI_TMP/$conf.lis $MINDI_TMP/$conf.lis2`
	2713	rm -f $MINDI_TMP/$conf.lis2
[3660]	2714	finallist=""
[3662]	2715	# Remove directories from the list, as cp will create them anyway
[3660]	2716	# and it may hurt if /lib is in it as on Debian/Ubuntu
	2717	# recent bash says that -d is true for a link to a dir !
[3662]	2718	for f in $lines; do
[3660]	2719	if [ -e "$f" -a ! -d "$f" ] \|\| [ -h "$f" ]; then
	2720	# Do not overwrite files already in destination (avoid using option -n of cp not portable)
[3692]	2721	if [ ! -e "$mp/$f" ]; then
[3660]	2722	finallist="$finallist $f"
	2723	fi
	2724	fi
	2725	done
	2726	# But adds the directory useful in $lis3
[3692]	2727	fnllist=`echo $finallist $lis3 \| tr ' ' '\n' \| sort -u \| tr '\n' ' '`
[3887]	2728	LogFile "INFO: Copying $conf related files with cp -a --parents $fnllist -t $mp/"
	2729	cp -a --parents $fnllist -t $mp/ 2> $templog \|\| LogAll "WARNING: Problem in $conf analysis" $templog
	2730	rm -f $MINDI_TMP/$conf.lis
[3660]	2731	}
	2732
[3692]	2733	PrepareTargetDir() {
	2734	local tgz_dir_fname nodes kernelsize res currsize not_copied j k s w needed_modules_path d thelink templog
[925]	2735
[3692]	2736	tgz_dir_fname=$MINDI_LIB/rootfs
	2737	rdz_fname=$MINDI_TMP/initrd.img
	2738	kernelsize=`du -sk $kernelpath \| cut -f1`
[3766]	2739	res=0
[3403]	2740	templog=$MINDI_TMP/$$.log
	2741	> $templog
	2742
[3887]	2743	mkdir -p $targetdir
[3248]	2744	# Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
	2745	for d in bin sbin lib lib64; do
	2746	if [ -h "/$d" ]; then
	2747	thelink=`readlink /$d`
[3692]	2748	mkdir -p $targetdir/$thelink \|\| LogAll "ERROR: Unable to create $thelink in $targetdir"
[3887]	2749	mv $targetdir/$d/* $targetdir/$d/.??* $targetdir/$thelink 2> /dev/null
[3692]	2750	if [ -d "$targetdir/$d" -a ! -h "$targetdir/$d" ]; then
	2751	rmdir $targetdir/$d
[3248]	2752	fi
[3692]	2753	if [ ! -h $targetdir/$d ]; then
	2754	rm -f $targetdir/$d 2> /dev/null
	2755	(cd $targetdir ; ln -s $thelink $d) \|\| LogAll "ERROR: /$d is a symbolic link, but I couldn't create it in $targetdir"
[3248]	2756	fi
	2757	fi
	2758	done
[3357]	2759
[3692]	2760	LogFile "INFO: what is now in $targetdir"
	2761	ls -al $targetdir >> $LOGFILE
[3172]	2762
[2963]	2763	# Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
[3692]	2764	# copy from rootfs into targetdir
[3771]	2765	LogAll "INFO: Copying Mindi files to $targetdir"
[3661]	2766	for f in $tgz_dir_fname/*; do
[2963]	2767	if [ ! -r $f ]; then
	2768	Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
	2769	else
[3692]	2770	cp -af $f $targetdir 2>&1 >> $LOGFILE
[2963]	2771	fi
	2772	done
[3692]	2773	(cd $targetdir/etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
	2774	# kernel expects linuxrc in ext2 filesystem
	2775	(cd $targetdir ; ln -sf usr/sbin/init linuxrc)
	2776	# kernel expects init in cpio filesystem
	2777	(cd $targetdir ; ln -sf usr/sbin/init init)
[1914]	2778
[3692]	2779	(cd $targetdir/dev ; tar -zxf dev-entries.tgz \|\| Die "Cannot untar dev-entries.tgz" ; rm -f dev-entries.tgz)
[747]	2780
	2781	for w in insmod.static insmod.static.old ; do
[925]	2782	s=`which $w 2> /dev/null`
	2783	if [ -e "$s" ] ; then
[3692]	2784	tar cf - -C / $s 2> /dev/null \| (cd $targetdir ; tar xf -)
[925]	2785	fi
[747]	2786	done
	2787
	2788	[ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
[2951]	2789
[2438]	2790	# Copy of files mandatory for ssh to automate mount if sshfs is used
[3692]	2791	mkdir -p $targetdir/.ssh $targetdir/tmp
	2792	cp -a ~root/.ssh/* $targetdir/.ssh 2> /dev/null
	2793	cat > $targetdir/tmp/myssh << EOF
	2794	ssh -o StrictHostKeyChecking=no \$*
[2438]	2795	EOF
[3692]	2796	chmod 755 $targetdir/tmp/myssh
[2438]	2797
[2039]	2798	# Copy of files mandatory for ld.so
[3692]	2799	cp -a /etc/ld.so.c* $targetdir/etc
[2039]	2800
[2951]	2801	# Handle the case where busybox and mount are dynamically linked
[3766]	2802	file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 \| grep -q "dynamically"
[2951]	2803	if [ $? -eq 0 ]; then
	2804	# We want to use the real mount and all the supported variants (nfs, cifs, ...)
[3692]	2805	rm -f $targetdir/bin/mount
[2951]	2806	fi
	2807
[3522]	2808	# Copy of files from the minimal env needed as per the deplist.d/minimal.conf (which includes all busybox deps)
[3692]	2809	CopyFromConf minimal $targetdir
[3357]	2810
	2811	# For older distributions expecting /sbin/init provides it
[3692]	2812	if [ ! -e "$targetdir/sbin/init" ]; then
	2813	(cd $targetdir/sbin ; ln -sf ../usr/sbin/init .)
[3357]	2814	fi
	2815
[3000]	2816	# To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
[3692]	2817	(cd $targetdir ; ln -sf /bin/bash bin/sh)
[3405]	2818	LogFile "INFO: Using bash as default shell"
[2951]	2819
	2820	# Avoids an issue on some distro (RHEL5)
[3692]	2821	rm -f $targetdir/etc/ld.so.conf.d/kernelcap*
[2164]	2822
[3661]	2823	# Management of DRBD
	2824	which drbdadm &> /dev/null
	2825	if [ $? -eq 0 ]; then
	2826	# Do we find DRBD devices setup
	2827	drbdadm sh-dev all \| grep -E '^/dev' &> /dev/null
	2828	if [ $? -eq 0 ]; then
[3692]	2829	CopyFromConf drbd $targetdir
[3661]	2830	fi
	2831	# DRBD requires net activation
	2832	MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS drbd"
	2833	fi
	2834
[1724]	2835	# Management of udev (which includes modprobe in rules)
[1759]	2836	ps auxww \| grep -v grep \| grep -qw udevd
[1716]	2837	if [ $? -eq 0 ]; then
[3692]	2838	echo "udev device manager found" > $targetdir/tmp/USE-UDEV
[3405]	2839	LogFile "INFO: udev device manager found"
[3692]	2840	tar cf - -C / /etc/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /etc/udev analysis" $templog
[3204]	2841	# This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
[3692]	2842	rm -f $targetdir/etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
[2894]	2843	# Do not do it if it's a link (Ubuntu 64 bits #503)
[3197]	2844	if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
[3692]	2845	tar cf - -C / /lib64/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /lib64/udev analysis" $templog
[2894]	2846	fi
[2895]	2847	if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [ ! -h "/lib32/udev" ]; then
[3692]	2848	tar cf - -C / /lib32/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /lib32/udev analysis" $templog
[2895]	2849	fi
	2850	if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [ ! -h "/lib/udev" ]; then
[3692]	2851	tar cf - -C / /lib/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /lib/udev analysis" $templog
[2895]	2852	fi
[3261]	2853	if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [ ! -h "/usr/lib/udev" ]; then
[3692]	2854	tar cf - -C / /usr/lib/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /usr/lib/udev analysis" $templog
[3261]	2855	fi
[3489]	2856	if [ -x /sbin/udevd ] \|\| [ -x /usr/bin/udevd ] \|\| [ -x /usr/lib/systemd/systemd-udevd ] \|\| [ -x /lib/systemd/systemd-udevd ]; then
[3692]	2857	CopyFromConf udev $targetdir
[1720]	2858	else
[2965]	2859	LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
[2963]	2860	LogAll " mindi will use static devices which may cause problems"
[3692]	2861	rm -f $targetdir/tmp/USE-UDEV
[1720]	2862	fi
[1716]	2863	fi
[1786]	2864
[2882]	2865	# Management of potential HW info (ProLiant only at the moment)
[1880]	2866	rm -rf $MINDI_CACHE/bkphw
	2867	mindi-bkphw $MINDI_CACHE $MINDI_CONF \| tee -a $LOGFILE
	2868	if [ -d $MINDI_CACHE/bkphw ]; then
[3565]	2869	LogAll "INFO: Hardware Information found and saved ..."
[3692]	2870	cp -rp $MINDI_CACHE/bkphw $targetdir
[1880]	2871	if [ -f $MINDI_CACHE/tools.files ]; then
[3766]	2872	lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
[1863]	2873	LocateDeps $lis > $MINDI_TMP/tools.lis
[3692]	2874	tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in tools.lis analysis" $templog
[1863]	2875	fi
[1880]	2876	if [ -f $MINDI_CACHE/mindi-rsthw ]; then
[3692]	2877	mv -f $MINDI_CACHE/mindi-rsthw $targetdir
	2878	chmod 755 $targetdir/mindi-rsthw
[1761]	2879	fi
[1880]	2880	rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
[1761]	2881	fi
	2882
[2183]	2883	# Management of perl scripts delivered needed at restore time
[3522]	2884	LogAll "INFO: Analyzing perl modules dependencies..."
[3565]	2885	mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]bin/mr- 2> $templog > $MINDI_TMP/perl.lis \|\| LogAll "ERROR: Problem in mindi-get-perl-modules" $templog
[3405]	2886	LogFile "DBG4: Perl Modules found:"
	2887	LogFile "-------------------------"
[3403]	2888	cat $MINDI_TMP/perl.lis >> $LOGFILE
[3405]	2889	LogFile "-------------------------"
[3692]	2890	tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in perl scripts analysis" $templog
[2183]	2891
[3692]	2892	tar cf - -C / /dev/fd0[1,2][4,7,8] 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in fd dev analysis" $templog
[1721]	2893
[1885]	2894	needed_modules=""
[3697]	2895	list_of_mods="$CDROM_MODS $FORCE_MODS"
[1885]	2896
[3270]	2897	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[747]	2898	# For PXE boot
[3697]	2899	list_of_mods="$list_of_mods $NET_MODS"
[747]	2900	fi
[1727]	2901	for i in $DENY_MODS; do
[2963]	2902	LogFile "INFO: Removing $i from the list of modules to load"
[3697]	2903	list_of_mods=`echo ${list_of_mods} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
[1727]	2904	done
	2905
[3253]	2906	if [ "${kernelname}" != "" ]; then
	2907	needed_modules_path=lib/modules/${kernelname}
[3257]	2908	mkgmopt="-k ${kernelname}"
[3253]	2909	else
	2910	needed_modules_path=lib/modules/$KERVERRUN
	2911	mkgmopt="-k $KERVERRUN"
	2912	fi
[1914]	2913
[3565]	2914	[ -e "/$needed_modules_path" ] \|\| LogAll "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then mindi won't probably work."
[3522]	2915	LogAll "INFO: Analyzing kernel modules dependencies..."
[3697]	2916	needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_mods`
[3253]	2917
[3257]	2918	LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
[3692]	2919	cp --parents -aL $needed_modules $targetdir/ 2> $templog \|\| LogAll "ERROR: Unable to copy modules to $targetdir" $templog
[3253]	2920
	2921	# Uncompress modules if not using udev and native modprobe
[3692]	2922	if [ ! -f $targetdir/tmp/USE-UDEV ]; then
[3253]	2923	for i in $needed_modules; do
	2924	if [ "`echo "$i" \| grep -E ".gz$"`" ]; then
[3692]	2925	gunzip -f $targetdir/$i
[1815]	2926	fi
[3253]	2927	if [ "`echo "$i" \| grep -E ".bz$"`" ]; then
[3692]	2928	bunzip2 -f $targetdir/$i
[3253]	2929	fi
	2930	if [ "`echo "$i" \| grep -E ".xz$"`" ]; then
[3692]	2931	unxz -f $targetdir/$i
[3253]	2932	fi
	2933	LogFile "INFO: Uncompressing $i"
	2934	done
	2935	fi
[1815]	2936
[2964]	2937	# Also copy modules.* in case of udev so that normal modprobe works
[3692]	2938	tar cf - -C / /$needed_modules_path/modules.* 2> $templog \| (cd "$targetdir" ; tar xf -) \|\| LogAll "ERROR: Unable to copy modules.* to $targetdir" $templog
[1815]	2939
[2680]	2940	# Copy FW in case some drivers needs it
[3163]	2941	for d in "/lib" "/usr/lib"; do
[3201]	2942	if [ -d "$d/firmware" -a ! -h $d ]; then
[3692]	2943	cp -a "$d/firmware" "$targetdir$d"
[3163]	2944	fi
	2945	done
[2680]	2946
[3163]	2947	# Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
	2948	for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
[3201]	2949	if [ -d "$d/multipath" -a ! -h $d ]; then
[3692]	2950	cp -a "$d/multipath" "$targetdir$d"
[3163]	2951	fi
	2952	done
	2953
[3326]	2954	# Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
[3692]	2955	(cd $targetdir/usr/bin ; for i in `ls`; do if [ ! -e "$targetdir/bin/$i" ]; then (cd $targetdir/bin ; ln -sf ../usr/bin/$i .); fi; done)
[3324]	2956
[2913]	2957	# Copy an additional ProLiant tool for OBDR support
	2958	if [ -f $MINDI_TMP/OBDR ]; then
[3117]	2959	found=0
[2913]	2960	if [ -x /usr/bin/hpsa_obdr_mode ]; then
[3692]	2961	mkdir -p $targetdir/usr/bin
	2962	cp -a /usr/bin/hpsa_obdr_mode $targetdir/usr/bin
[3565]	2963	LogAll "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
[3117]	2964	found=1
	2965	fi
	2966	if [ -x /usr/bin/sg_wr_mode ]; then
[3692]	2967	mkdir -p $targetdir/usr/bin
[3135]	2968	lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
[3118]	2969	LocateDeps $lis > $MINDI_TMP/obdr.lis
[3692]	2970	tar cf - $lis -C / `sort -u $MINDI_TMP/obdr.lis` 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in obdr.lis analysis" $templog
[3565]	2971	LogAll "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
[3117]	2972	found=1
	2973	fi
	2974	if [ $found -eq 0 ]; then
	2975	LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
[2913]	2976	LogAll " This may lead to a tape not going back to sequential mode after OBDR boot"
	2977	fi
	2978	fi
	2979
[3499]	2980	if [ ! -e "/sbin/devfsd" ]; then
[2963]	2981	LogFile "INFO: Deleting devfsd daemon from ramdisk"
[2995]	2982	[ ! -e "/sbin/devfsd" ] && LogFile " ...because /sbin/devfsd not found"
[3692]	2983	rm -f $targetdir/sbin/devfsd
[747]	2984	fi
[3692]	2985	[ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $targetdir/tmp/TAPEDEV-LIVES-HERE
[1885]	2986	if [ _"$MONDO_SHARE" != _"" ]; then
[3692]	2987	MakeMondoConfigFile $targetdir/tmp/$MRCFG
	2988	cp -f $targetdir/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE \|\| Die "Cannot copy $MRCFG to ramdisk"
	2989	cp -f $MINDI_TMP/mountlist.txt $targetdir/tmp/ 2>> $LOGFILE \|\| Die "Cannot copy mountlist to ramdisk"
	2990	echo -en "$FILES_IN_FILELIST" > $targetdir/tmp/FILES-IN-FILELIST
	2991	echo -en "$LAST_FILELIST_NUMBER" > $targetdir/tmp/LAST-FILELIST-NUMBER
[747]	2992	fi
[3310]	2993
	2994	# Create module list to load at restore time
[3692]	2995	rm -f $targetdir/tmp/modules
[3310]	2996	for m in $CDROM_MODS; do
[3692]	2997	echo $m >> $targetdir/tmp/modules
[3310]	2998	done
	2999
[3692]	3000	mkdir -p $targetdir/proc
[2963]	3001	LogFile "---------------------------"
[3692]	3002	LogFile "Content of initial targetdir:"
	3003	LogFile "---------------------------- "
	3004	(cd "$targetdir" ; ls -Rla ) >> $LOGFILE
[3372]	3005	LogFile "---------------------------"
[3692]	3006	}
[2438]	3007
[3692]	3008	CleanTargetDir() {
	3009	[ "$targetdir" != "/" ] && rm -rf $targetdir
	3010	}
	3011
	3012	PatchBootFiles() {
	3013
	3014	# Patch the real value of RAMDISK_SIZE now we have it
	3015	if [ -d "$bigdir/syslinux" ]; then
	3016	find $bigdir/syslinux -type f 1> $MINDI_TMP/bootf.lis 2> /dev/null
	3017	fi
	3018	if [ -d "$bigdir/EFI" ]; then
	3019	find $bigdir/EFI -type f 1>> $MINDI_TMP/bootf.lis 2> /dev/null
	3020	fi
	3021	for i in `cat $MINDI_TMP/bootf.lis`; do
	3022	perl -pi -e "s/RAMDISK_SIZE/$ramdisk_size/" $i
	3023	done
	3024	rm -f $MINDI_TMP/bootf.lis
	3025
	3026	}
	3027
	3028	MakeBootInitFile() {
	3029
	3030	local mountpoint tempfile res
	3031	tempfile=$MINDI_TMP/temp.rd
	3032	res=0
	3033
	3034	LogAll "INFO: Making Boot RAM Disk ($ramdisk_size KB)"
	3035	dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null \|\| Die "Not enough room for temporary ramdisk (MakeBootInitFile)"
	3036
	3037	LogAll "INFO: Creating ext2 filesystem on $tempfile"
	3038	mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE \|\| Die "Unable to create an ext2 file system on $tempfile"
	3039	res=$(($res+$?))
	3040
	3041	mountpoint=$MINDI_TMP/mountpoint.$$
	3042	mkdir -p $mountpoint
	3043	mount -t ext2 -o loop $tempfile $mountpoint \|\| Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
	3044	[ "$targetdir" = "/" ] && echo $targetdir \| grep -qv $MINDI_TMP && Die "Wrong targetdir $targetdir"
	3045	mv $targetdir/* $targetdir/.??* $mountpoint \|\| Die "Unable to move files from $targetdir to $mountpoint! Please increase EXTRA_SPACE"
	3046	res=$(($res+$?))
	3047	rmdir $targetdir
	3048
	3049	LogFile "INFO: initrd image is $rdz_fname"
[1230]	3050	# Determine what filesystem to use for initrd image
[2963]	3051	LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
[1230]	3052	gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
	3053	[ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
[3008]	3054	if [ "$gvFileSystem" = "ext2fs" ] \|\| [ "$gvFileSystem" = "ext3fs" ] \|\| [ "$gvFileSystem" = "ext4fs" ]; then
[1230]	3055	# say what will be used
[2963]	3056	LogFile "INFO: Creating an $gvFileSystem initrd image..."
[1230]	3057	# unmount loop filesystem and create image file using the standard approach
[3546]	3058	sync
[1230]	3059	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
[3522]	3060	dd if=$tempfile bs=1k of=${rdz_fname}.tmp > /dev/null 2> /dev/null
[3692]	3061	res=$(($res+$?))
[3008]	3062	if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
	3063	bs=`/sbin/tune4fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
	3064	else
	3065	bs=`tune2fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
	3066	fi
[2564]	3067	MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
[1799]	3068	gzip -c9 ${rdz_fname}.tmp > $rdz_fname
[3692]	3069	res=$(($res+$?))
[1764]	3070	rm -f ${rdz_fname}.tmp
[2390]	3071	elif [ "$gvFileSystem" = "initramfs" ]; then
[1230]	3072	# say what will be used
[2963]	3073	LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
[1230]	3074	# make sure that cpio is there
	3075	which cpio &> /dev/null; [ $? -eq 0 ] \|\| Die "cpio not found. Please install package cpio and try again."
	3076	# create cpio image file and unmount loop filesystem
[3524]	3077	(cd "$mountpoint" ; find . -print \| cpio -o -H newc 2> /dev/null \| gzip -9 > $rdz_fname)
[3692]	3078	res=$(($res+$?))
[3546]	3079	sync
[1230]	3080	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
[2390]	3081	else
[1230]	3082	Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
[2390]	3083	fi
	3084
[3692]	3085	# log that we are done
[747]	3086	if [ "$res" -eq "0" ] ; then
[3525]	3087	LogAll "INFO: MakeBootInitFile finished without error."
[747]	3088	else
[3525]	3089	LogAll "WARNING: MakeBootInitFile exits WITH ERRORS."
[747]	3090	fi
[3692]	3091
[747]	3092	return 0
	3093	}
	3094
	3095
	3096	##############################################################################
[1021]	3097	#----------------------------------- Main -----------------------------------#
[747]	3098	##############################################################################
	3099
[1885]	3100	# Now we can create what we need
	3101	mkdir -p $MINDI_TMP
[3692]	3102	export bigdir=$MINDI_TMP/bigdir.$$
	3103	export targetdir=$MINDI_TMP/targetdir.$$
[747]	3104
[2995]	3105	# --nolog needs to be first, and is used in analyze-my-lvm
	3106	if [ "$1" = "--nolog" ] ; then
	3107	shift
	3108	LOGFILE=/dev/stderr
	3109	else
	3110	> $LOGFILE
	3111	fi
[1885]	3112	if [ "$1" = "--printvar" ] ; then
	3113	shift
	3114	if [ _"$1" != _"" ] ; then
	3115	set \| grep -Ew "^$1" \| cut -d= -f2
	3116	fi
[2183]	3117	exit 0
[1885]	3118	fi
	3119
[2963]	3120	LogFile "mindi v$MINDI_VERSION"
[3513]	3121	LogFile "-----------------------------"
	3122	LogFile "Start date : `date`"
	3123	LogFile "-----------------------------"
[2963]	3124	LogFile "$ARCH architecture detected"
	3125	LogFile "mindi called with the following arguments:"
[2978]	3126	echo "$@">> $LOGFILE
[2963]	3127	LogFile "-----------------------------"
[3650]	3128	pbdistrocheck --version \| grep Version >> $LOGFILE
[3513]	3129	LogFile "pbdistrocheck results:"
	3130	pbdistrocheck >> $LOGFILE
	3131	LogFile "-----------------------------"
[3650]	3132	LogFile "MondoRescue perl module:"
	3133	mr-getparam --version \| grep Version >> $LOGFILE
	3134	LogFile "-----------------------------"
[747]	3135
[1010]	3136	# Log some capital variables
	3137	[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
[3149]	3138	[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
[2963]	3139	LogFile "MONDO_SHARE = $MONDO_SHARE"
	3140	LogFile "MINDI_LIB = $MINDI_LIB"
	3141	LogFile "MINDI_SBIN = $MINDI_SBIN"
	3142	LogFile "MINDI_CONF = $MINDI_CONF"
[3388]	3143	# Purge from potential old run
	3144	if [ _"$MINDI_CACHE" = _"" ]; then
	3145	Die "MINDI_CACHE undefined"
	3146	else
	3147	LogFile "MINDI_CACHE = $MINDI_CACHE"
	3148	fi
	3149
[1885]	3150	if [ -f $MINDI_CONFIG ]; then
[2963]	3151	LogFile "-----------------------------"
[3714]	3152	LogFile "Mindi configuration file "
[2963]	3153	LogFile "-----------------------------"
[1885]	3154	grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
[2963]	3155	LogFile "-----------------------------"
[1885]	3156	fi
[2995]	3157	LogFile "In Mindi"
	3158	LogFile "--------"
	3159	LogFile "EXTRA_SPACE = $EXTRA_SPACE"
	3160	LogFile "--------"
[1010]	3161
[747]	3162	trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
[1010]	3163
	3164	# Sanity checks
	3165	which which > /dev/null 2> /dev/null \|\| Die "Please install 'which'."
	3166	which strings > /dev/null 2> /dev/null \|\| Die "Please install binutils and libbinutils; you have no 'strings' executable."
	3167	which gawk > /dev/null 2> /dev/null \|\| Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
	3168	which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` \|\| AWK="`which awk 2>/dev/null`"
	3169	if which awk &> /dev/null ; then
	3170	if ! which gawk &> /dev/null ; then
[3565]	3171	LogAll "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
[1010]	3172	fi
	3173	fi
	3174	which mke2fs > /dev/null 2> /dev/null \|\| Die "Please put mke2fs in system path"
[2222]	3175	[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
[1010]	3176
[3005]	3177	[ "`echo $KERVERRUN \| grep -E "2\.4\.[0-6]" \| grep -vE "2\.4\.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
[1010]	3178
	3179	# Update the PATH variable if incomplete
	3180	if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
	3181	PATH=$PATH:/sbin:/usr/sbin
	3182	export PATH
[2963]	3183	LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
	3184	LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
[3255]	3185	LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
[1010]	3186	fi
	3187
[1737]	3188	if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
[3368]	3189	Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
[1010]	3190	fi
	3191
[3887]	3192	FindIsolinuxBinary
[747]	3193	trap "Aborted" SIGTERM
	3194	DONE="\r\t\t\t\t\t\t\t\tDone. "
	3195	kernelpath=""
[1010]	3196	MONDO_ROOT=/var/cache/mondo
[747]	3197	mkdir -p $MONDO_ROOT
	3198
	3199	if [ -d "/proc/lvm" ]; then
	3200	# LVM v1
	3201	LVMCMD=""
	3202	LVM="v1"
	3203	elif [ -d "/dev/mapper" ]; then
	3204	# LVM v2
	3205	LVMCMD="lvm"
	3206	LVM="v2"
	3207	else
	3208	LVM="false"
	3209	fi
[3149]	3210
	3211	if [ -e "/proc/cmdline" ]; then
	3212	CMDLINE="/proc/cmdline"
	3213	elif [ -e "/tmp/cmdline" ]; then
	3214	CMDLINE="/tmp/cmdline"
	3215	else
	3216	CMDLINE="/dev/null"
	3217	fi
	3218
[2963]	3219	LogFile "INFO: LVM set to $LVM"
	3220	LogFile "----------"
	3221	LogFile "mount result:"
	3222	LogFile "-------------"
[1230]	3223	mount >> $LOGFILE
[3479]	3224	if [ -e "/etc/raidtab" ]; then
[2963]	3225	LogFile "-------------"
	3226	LogFile "/etc/raidtab content:"
	3227	LogFile "-------------"
[1315]	3228	cat /etc/raidtab >> $LOGFILE
[3077]	3229	else
[3073]	3230	LogFile "No file /etc/raidtab"
[1315]	3231	fi
[3479]	3232	if [ -e "/etc/mdadm.conf" ]; then
[2981]	3233	LogFile "-------------"
	3234	LogFile "/etc/mdadm.conf content:"
	3235	LogFile "-------------"
	3236	cat /etc/mdadm.conf >> $LOGFILE
[3077]	3237	else
[3149]	3238	LogFile "-------------"
[3073]	3239	LogFile "No file /etc/mdadm.conf"
[2981]	3240	fi
[2963]	3241	LogFile "-------------"
[3149]	3242	LogFile "cat $CMDLINE"
[2963]	3243	LogFile "-------------"
[3149]	3244	cat $CMDLINE >> $LOGFILE
[2963]	3245	LogFile "-------------"
	3246	LogFile "cat /proc/swaps:"
	3247	LogFile "-------------"
[2014]	3248	cat /proc/swaps >> $LOGFILE
[2963]	3249	LogFile "-------------"
[3479]	3250	if [ -e "/proc/mdstat" ]; then
[3073]	3251	LogFile "cat /proc/mdstat:"
	3252	LogFile "-------------"
	3253	cat /proc/mdstat >> $LOGFILE
[3077]	3254	else
[3073]	3255	LogFile "No pseudo file /proc/mdstat"
	3256	fi
[2981]	3257	LogFile "-------------"
[2963]	3258	LogFile "cat /proc/partitions:"
	3259	LogFile "-------------"
[2015]	3260	cat /proc/partitions >> $LOGFILE
[2963]	3261	LogFile "-------------"
	3262	LogFile "cat /proc/filesystems:"
	3263	LogFile "-------------"
[2015]	3264	cat /proc/filesystems >> $LOGFILE
[2963]	3265	LogFile "-------------"
	3266	LogFile "lsmod result:"
	3267	LogFile "-------------"
[1021]	3268	lsmod >> $LOGFILE
[2431]	3269	MODULES="`cat /proc/modules \| $AWK '{print $1}'`"
[1531]	3270	if [ -x /usr/sbin/esxcfg-module ]; then
[2963]	3271	LogFile "-------------"
	3272	LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
	3273	LogFile "-------------"
	3274	LogFile "VMWare modules"
	3275	LogFile "-------------"
[1531]	3276	/usr/sbin/esxcfg-module -l >> $LOGFILE
[2431]	3277	MODULES="$MODULES `/usr/sbin/esxcfg-module -l \| $AWK '{print $1}'`"
[1497]	3278	fi
[3766]	3279	LogFile "-------------"
[2963]	3280	LogFile "FORCE_MODS:"
	3281	LogFile "-------------"
[3065]	3282	LogFile "$FORCE_MODS"
[2963]	3283	LogFile "-------------"
	3284	LogFile "DENY_MODS:"
	3285	LogFile "-------------"
[3065]	3286	LogFile "$DENY_MODS"
[2963]	3287	LogFile "-------------"
	3288	LogFile "df result:"
	3289	LogFile "----------"
[3117]	3290	df -aT >> $LOGFILE
[2963]	3291	LogFile "-------------"
[3117]	3292	LogFile "df -i result:"
	3293	LogFile "----------"
	3294	df -i >> $LOGFILE
	3295	LogFile "-------------"
	3296	if [ -r /boot/grub/menu.lst ]; then
	3297	LogFile "-------------"
	3298	LogFile "INFO: /boot/grub/menu.lst content"
	3299	LogFile "-------------"
	3300	cat /boot/grub/menu.lst >> $LOGFILE
[3123]	3301	LogFile "-------------"
[3117]	3302	fi
[3123]	3303	if [ -r /boot/grub/grub.conf ]; then
[3117]	3304	LogFile "-------------"
[3123]	3305	LogFile "INFO: /boot/grub/grub.conf content"
	3306	LogFile "-------------"
	3307	cat /boot/grub/grub.conf >> $LOGFILE
	3308	LogFile "-------------"
	3309	fi
	3310	if [ -r /boot/grub/grub.cfg ]; then
	3311	LogFile "-------------"
	3312	LogFile "INFO: /boot/grub/grub.cfg content"
	3313	LogFile "-------------"
	3314	cat /boot/grub/grub.cfg >> $LOGFILE
	3315	LogFile "-------------"
	3316	fi
[3722]	3317	if [ -r /boot/grub2/grub.cfg ]; then
	3318	LogFile "-------------"
	3319	LogFile "INFO: /boot/grub2/grub.cfg content"
	3320	LogFile "-------------"
	3321	cat /boot/grub2/grub.cfg >> $LOGFILE
	3322	LogFile "-------------"
	3323	fi
[3123]	3324	if [ -r /boot/grub/device.map ]; then
	3325	LogFile "-------------"
[3117]	3326	LogFile "INFO: /boot/grub/device.map content"
	3327	LogFile "-------------"
[3123]	3328	cat /boot/grub/device.map >> $LOGFILE
	3329	LogFile "-------------"
[3117]	3330	fi
[3643]	3331	if [ -r /boot/grub2/device.map ]; then
	3332	LogFile "-------------"
	3333	LogFile "INFO: /boot/grub2/device.map content"
	3334	LogFile "-------------"
	3335	cat /boot/grub2/device.map >> $LOGFILE
	3336	LogFile "-------------"
	3337	fi
[3117]	3338	if [ -r /etc/lilo.conf ]; then
	3339	LogFile "-------------"
	3340	LogFile "INFO: /etc/lilo.conf content"
	3341	LogFile "-------------"
	3342	cat /etc/lilo.conf >> $LOGFILE
	3343	fi
[3378]	3344	if [ -d /boot/efi ]; then
[3425]	3345	gcf=`find /boot/efi -name 'grub.c*'`
[3384]	3346	if [ _"$gcf" = _"" ]; then
[3425]	3347	LogFile "Found a /boot/efi directory without a grub config file in it"
[3384]	3348	else
	3349	LogFile "-------------"
	3350	LogFile "INFO: $gcf content"
	3351	LogFile "-------------"
	3352	cat $gcf >> $LOGFILE
	3353	LogFile "-------------"
	3354	fi
[3378]	3355	fi
	3356
[3146]	3357	LogFile "Full fdisk info"
	3358	LogFile "---------------"
	3359	$FDISK -l >> $LOGFILE
	3360	LogFile "----------------"
[3746]	3361	LogFile "MBRFILE = $MBRFILE"
	3362	LogFile "GPTMBRFILE = $GPTMBRFILE"
[747]	3363
[1723]	3364	# Compute libata version
[2649]	3365	laver=`modinfo libata 2> /dev/null \| grep -Ei '^Version:' \| cut -d: -f2 \| cut -d. -f1 \| sed 's/ *//g' 2> /dev/null`
[1723]	3366	# If libata v2 is used then remove ide-generic as it will perturbate boot
[1726]	3367	if [ "`echo $MODULES \| grep libata`" ]; then
[1727]	3368	if [ "$laver" = "2" ]; then
[1726]	3369	DENY_MODS="$DENY_MODS ide-generic"
[2963]	3370	LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
	3371	LogFile "-------------"
[1726]	3372	fi
[1723]	3373	fi
	3374
[2963]	3375	# Check for McAfee which disturbs the access to some files (tgz in articular)
[2976]	3376	if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
[2963]	3377	LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
	3378	LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
	3379	LogFile "WARNING: You have two options:"
	3380	LogFile "WARNING: - Exclude all directories with special files (check McAfee System Events Log)"
	3381	LogFile "WARNING: - Disable the scanner during the backup"
	3382	fi
	3383
[1684]	3384	#
[3766]	3385	# If we have a USB device we need to store info
[1684]	3386	# and remove it from the parameters line
	3387	#
[747]	3388	if [ "$#" -ne "0" ] ; then
[1684]	3389	if [ "$1" = "--usb" ] ; then
	3390	shift
	3391	USBDEVICE=$1
	3392	if [ _"$USBDEVICE" = _"" ]; then
	3393	Die "No USB device specified"
	3394	fi
	3395	shift
	3396	fi
	3397	fi
	3398
	3399	if [ "$#" -ne "0" ] ; then
[747]	3400	if [ "$1" = "--findkernel" ] ; then
[2880]	3401	resk=`TryToFindKernelPath`
[1336]	3402	# Avoids logfile content for mondo
	3403	export MONDO_SHARE=""
[2880]	3404	if [ "$resk" = "" ] ; then
[2838]	3405	if [ $KERNEL_IS_XEN = "yes" ]; then
	3406	echo "$xenkernelpath"
[2963]	3407	LogFile "INFO: xenkernelpath = $xenkernelpath"
[2860]	3408	MindiExit 0
[2838]	3409	else
[2860]	3410	MindiExit -1
[2838]	3411	fi
[747]	3412	else
[2880]	3413	echo "$resk"
[2963]	3414	LogFile "INFO: kernelpath = $resk"
[2860]	3415	MindiExit 0
[747]	3416	fi
[1720]	3417	elif [ "$1" = "--locatedeps" ] ; then
	3418	[ ! "$2" ] && Die "Please specify the binary to look at"
[2438]	3419	LocateDeps $*
[1720]	3420	# Avoids logfile content for mondo
	3421	export MONDO_SHARE=""
	3422	MindiExit $?
[1815]	3423	elif [ "$1" = "--readalllink" ] ; then
	3424	[ ! "$2" ] && Die "Please specify the binary to look at"
	3425	# Avoids logfile content for mondo
	3426	export MONDO_SHARE=""
[3231]	3427	mr-read-all-link $2
[1815]	3428	MindiExit $?
[3518]	3429	elif [ "$1" = "--makebcf" ] ; then
[3520]	3430	[ ! "$2" ] && Die "Please specify the boot loader to check (syslinux, grub, grub2)"
[3518]	3431	MakeBootConfFile $2
[3519]	3432	MindiExit 0
[2731]	3433	elif [ "$1" = "--makemessage" ] ; then
[2948]	3434	MakeMessageFile \| cut -c1-80
[2731]	3435	MindiExit 0
[747]	3436	elif [ "$1" = "--makemountlist" ] ; then
	3437	[ ! "$2" ] && Die "Please specify the output file"
	3438	MakeMountlist $2
[2432]	3439	CheckMountlist $2
[1336]	3440	# Avoids logfile content for mondo
	3441	export MONDO_SHARE=""
[925]	3442	MindiExit $?
	3443	elif [ "$1" = "-V" ] \|\| [ "$1" = "-v" ] \|\| [ "$1" = "--version" ] \|\| [ "$1" = "-version" ] ; then
	3444	echo "Mindi v$MINDI_VERSION"
[1336]	3445	# Avoids logfile content for mondo
	3446	export MONDO_SHARE=""
[925]	3447	MindiExit 0
[3585]	3448	elif [ "$1" = "--ironic" ] ; then
	3449	[ ! "$2" ] && [ ! -f "$2" ] && Die "Please specify the kernel to use"
	3450	[ ! "$3" ] && [ ! -f "$3" ] && Die "Please specify the initramfs to use"
	3451	[ "$4" ] && [ "$4" != "UEFI" ] && [ "$4" != "BIOS" ] && Die "Please specify the boot mode as BIOS or UEFI"
	3452	#TODO: See how we can influence the boot loader
	3453	[ "$5" ] && [ "$5" != "isolinux" ] && [ "$5" != "grub" ] && [ "$5" != "grub2" ] && Die "Please specify the boot loader as isolinux or grub or grub2"
	3454	if [ "$5" ]; then
	3455	boottype=$5
	3456	fi
	3457	[ "$6" ] && [ ! -e "$6" ] && Die "Please specify an existing boot loader path for $boottype"
	3458	if [ "$6" ]; then
	3459	bootbin=$6
	3460	fi
	3461	kernelpath=$2
	3462	BOOT_TYPE=$4
[3590]	3463	# Ironic requires some specific boot parameters
[3588]	3464	MINDI_ADDITIONAL_BOOT_PARAMS="selinux=0 barrier=off udevtimeout=10 systemd.debug-shell boot_method=vmedia"
	3465	MINDI_BOOT_TIMEOUT=10
[3590]	3466	EXTRA_SPACE=1500000
	3467	# Get the local improvements to the configuration
[3589]	3468	if [ -f $MINDI_CONFIG ]; then
	3469	. $MINDI_CONFIG
	3470	fi
[3585]	3471	PrepareBootDir
[3692]	3472	PrepareBigDirTar
	3473	CleanBigDir
[3585]	3474	cp $3 $MINDI_TMP/initrd.img
	3475	MakeBootableDevice ISO
	3476	MindiExit 0
[747]	3477	elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
[940]	3478	MONDO_TMP=$2
[3661]	3479	# Change MINDI_TMP for the one provided by mondo
[940]	3480	# So that it can get back the built files
[2153]	3481	if [ _"$MONDO_TMP" = _"" ]; then
	3482	Die "MONDO_TMP is empty, aborting"
	3483	fi
	3484	if [ _"$MONDO_TMP" = _"/" ]; then
	3485	Die "MONDO_TMP is /, aborting"
	3486	fi
[2092]	3487	mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
[1010]	3488	rmdir $MINDI_TMP
[1486]	3489	export MINDI_TMP=$MONDO_TMP
[953]	3490	mkdir -p $MINDI_TMP
[2238]	3491
[1696]	3492	# This is the scratch dir in mondo - subdir images
[1880]	3493	MINDI_CACHE=$3
[3388]	3494	LogFile "MINDI_CACHE = $MINDI_CACHE"
[3709]	3495	LogFile "MINDI_TMP = $MINDI_TMP"
[2238]	3496
[925]	3497	kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
[2681]	3498	[ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
	3499
[747]	3500	###
	3501	### Sq-Modification...
	3502	### Attempt to locate kernel specific module path
	3503	### if module path is found then use it other wise use uname -r to set it...
	3504	###
[2629]	3505	if [ $KERNEL_IS_XEN = "yes" ]; then
[3149]	3506	LogAll "INFO: xenkernelpath = $xenkernelpath"
[2629]	3507	fi
[2657]	3508	kernelname=`echo $kernelpath \| cut -d'-' -f2- \| sed 's/.[bg]z[2]*$//'`
[3231]	3509	if [ ! -d "/lib/modules/$kernelname" ]; then
[3149]	3510	LogAll "WARNING: Module path for ${kernelpath} not found..."
	3511	LogAll " using running kernel\'s modules."
[2292]	3512	kernelname=$KERVERRUN
[3149]	3513	else
[3426]	3514	LogAll "INFO: Using modules for kernel: ${kernelname}"
[747]	3515	fi
[3149]	3516	LogAll "INFO: kernelname = $kernelname"
	3517	LogAll "INFO: kernelpath = $kernelpath"
[747]	3518	###
	3519	### end of Sq-Modification
	3520	###
[925]	3521	TAPEDEV=$5
	3522	TAPESIZE=$6
	3523	FILES_IN_FILELIST=$7
	3524	USE_LZO=$8
	3525	CDRECOVERY=$9
[747]	3526	if [ "${10}" = "(null)" ] \|\| [ "${10}" = "" ] ; then
	3527	IMAGE_DEVS=""
	3528	else
	3529	IMAGE_DEVS="`echo "${10}" \| tr '\|' ' '`"
	3530	fi
[925]	3531	if [ "${11}" ] ; then
	3532	LILO_OPTIONS=""
[3149]	3533	# LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
[925]	3534	fi
	3535	LAST_FILELIST_NUMBER=${12}
[747]	3536	ESTIMATED_TOTAL_NOOF_SLICES=${13}
[2564]	3537	export MINDI_EXCLUDE_DEVS="${14}"
[747]	3538	USE_COMP="${15}"
[3888]	3539	USE_STAR="${16}"
	3540	INTERNAL_TAPE_BLOCK_SIZE="${17}"
	3541	DIFFERENTIAL="${18}"
	3542	USE_GZIP="${19}"
	3543	USE_LZMA="${20}"
	3544	BOOT_TYPE="${21}"
[747]	3545	[ "$USE_COMP" = "" ] && USE_COMP=yes
[998]	3546	[ "$USE_GZIP" = "" ] && USE_GZIP=no
[3353]	3547	[ "$USE_LZMA" = "" ] && USE_LZMA=no
[3565]	3548	[ "$TAPEDEV" ] && LogAll "INFO: This is a tape-based backup. Fine."
[1696]	3549	# MONDO_ROOT is the real scratchdir
[1880]	3550	MONDO_ROOT=`echo $MINDI_CACHE \| sed 's/$.$\/./\1/'`
[938]	3551	if [ _"$MONDO_ROOT" != _"" ]; then
	3552	mkdir -p $MONDO_ROOT
	3553	else
	3554	Die "MONDO_ROOT is undefined"
	3555	fi
[747]	3556	else
[3585]	3557	LogScreen "Syntax: mindi [--custom ....MondoRescue parameters...]"
	3558	LogScreen " mindi --ironic kernel initrd [BIOS\|UEFI] [syslinux\|grub\|grub2] [/path/to/bootloader]"
	3559	LogScreen " mindi --locatedeps file"
	3560	LogScreen " mindi --makemessage"
[3586]	3561	LogScreen " mindi --findkernel"
[3585]	3562	LogScreen " mindi --makemountlist file"
	3563	LogScreen " mindi --makebcf bootloader"
	3564	LogScreen " mindi -V"
[925]	3565	MindiExit -1
[747]	3566	fi
	3567	fi
[2238]	3568
	3569	if [ _"$MINDI_CACHE" != _"" ]; then
	3570	rm -rf $MINDI_CACHE/* 2> /dev/null
	3571	mkdir -p $MINDI_CACHE
	3572	fi
	3573
[747]	3574	[ "$CDRECOVERY" = "yes" ] \|\| CDRECOVERY=no
	3575
[1684]	3576	if [ _"$MONDO_SHARE" = _"" ]; then
[3565]	3577	LogAll "Mindi Linux mini-distro generator v$MINDI_VERSION"
	3578	LogAll "Latest Mindi is available from http://www.mondorescue.org"
	3579	LogAll "BusyBox sources are available from http://www.busybox.net"
	3580	LogAll "------------------------------------------------------------------------------"
[747]	3581	else
[3426]	3582	LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
[747]	3583	fi
[3231]	3584	if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
[3565]	3585	LogAll "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 \| head -1`"
[1005]	3586	else
[3565]	3587	LogAll "ERROR: Unable to find mindi-busybox, please install it"
[1005]	3588	MindiExit -1
	3589	fi
[747]	3590
	3591	for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
[3111]	3592	modinfo $i 2> /dev/null 1> /dev/null
[3014]	3593	if [ $? -eq 0 ]; then
	3594	modprobe $i 2>&1 > /dev/null
	3595	fi
[747]	3596	done
	3597
[2963]	3598	LogFile "DIFFERENTIAL = $DIFFERENTIAL"
	3599	LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
[747]	3600
[1690]	3601	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[3565]	3602	LogAll "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
[1684]	3603	fi
	3604
[747]	3605	if [ "$kernelpath" = "" ] ; then
[1335]	3606	[ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
[3522]	3607	echo -en "\nDo you want to use your own kernel to build the boot disk ([y]/n) ?"
[966]	3608	read ch
	3609	if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
[3651]	3610	USE_OWN_KERNEL="yes"
[1809]	3611	else
	3612	USE_OWN_KERNEL="no"
[747]	3613	fi
	3614	if [ "$USE_OWN_KERNEL" = "yes" ]; then
[925]	3615	kernelpath=`TryToFindKernelPath`
	3616	if [ "$kernelpath" = "" ] ; then
	3617	echo -n "Please enter kernel path : "
	3618	read kernelpath
	3619	fi
[747]	3620	fi
	3621	fi
[3231]	3622
[1880]	3623	echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
[3565]	3624	[ "$(($RANDOM%64))" -eq "0" ] && LogAll "INFO: Dude, I've looked inside your computer and it's really dusty..."
[747]	3625
[3692]	3626	PrepareBigDir
	3627	bigdir_size=`du -sk $bigdir \| cut -f1`
	3628	LogFile "---------------------------"
	3629	LogFile "INFO: bigdir size is $bigdir_size KB"
[1983]	3630
[3692]	3631	PrepareTargetDir \|\| Die "Could not create initrd.img in target dir"
	3632	targetdir_size=`du -sk $targetdir \| cut -f1`
	3633	LogFile "---------------------------"
	3634	LogFile "INFO: targetdir size is $targetdir_size KB"
	3635	LogFile "---------------------------- "
[3522]	3636
[3692]	3637	# Now we can compute it correctly with some extra in case of...
	3638	export ramdisk_size=$(($bigdir_size+$targetdir_size+$EXTRA_SPACE))
	3639	# And now we can patch the value in conf files
	3640	PatchBootFiles
	3641	# And tar them
	3642	PrepareBigDirTar
	3643	# And prepare boot setup
	3644	MakeBootInitFile
	3645	# Now cleans up stuff
	3646	CleanBigDir
	3647	CleanTargetDir
	3648
[747]	3649	[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
[3653]	3650	...Or type 'memtest' to test your machine's RAM thoroughly.\n"
[747]	3651
[1684]	3652	if [ _"$MONDO_SHARE" = _"" ]; then
[1983]	3653	OfferToMakeBootableISO
[1684]	3654	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
[1983]	3655	OfferToMakeBootableUSB
[1684]	3656	fi
[3522]	3657	LogAll "INFO: Mindi Finished"
[747]	3658	elif [ "$TAPEDEV" ] ; then
[3887]	3659	rm -f $MINDI_CACHE/*iso
[1898]	3660	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	3661	OfferToMakeBootableUSB
[1898]	3662	fi
[1983]	3663	OfferToMakeBootableISO
[1880]	3664	if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
	3665	cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
[747]	3666	else
[925]	3667	Die "Cannot find all.tar.gz, to be written to tape"
[747]	3668	fi
[1695]	3669	elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	3670	OfferToMakeBootableUSB
[747]	3671	else
[1983]	3672	OfferToMakeBootableISO
[747]	3673	fi
[3391]	3674
[3396]	3675	if [ -f $MINDI_TMP/$MRCFG ]; then
[3425]	3676	LogFile "INFO: Your $MRCFG file is:"
	3677	LogFile "--------------------------"
	3678	cat $MINDI_TMP/$MRCFG >> $LOGFILE
	3679	LogFile "--------------------------"
[3391]	3680	else
[3421]	3681	if [ _"$MONDO_SHARE" != _"" ] ; then
[3565]	3682	LogAll "ERROR: You don't have a $MRCFG file !"
[3421]	3683	fi
[3391]	3684	fi
[747]	3685	# cleanup
[925]	3686	MindiExit 0

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: MondoRescue/branches/3.3/mindi/mindi

Download in other formats: