source: MondoRescue/branches/3.3/mindi-busybox/printutils/lpd.c@ 3621

/* vi: set sw=4 ts=4: */
/*
 * micro lpd
 *
 * Copyright (C) 2008 by Vladimir Dronnikov <dronnikov@gmail.com>
 *
 * Licensed under GPLv2, see file LICENSE in this source tree.
 */

/*
 * A typical usage of BB lpd looks as follows:
 * # tcpsvd -E 0 515 lpd [SPOOLDIR] [HELPER-PROG [ARGS...]]
 *
 * This starts TCP listener on port 515 (default for LP protocol).
 * When a client connection is made (via lpr) lpd first changes its
 * working directory to SPOOLDIR (current dir is the default).
 *
 * SPOOLDIR is the spool directory which contains printing queues
 * and should have the following structure:
 *
 * SPOOLDIR/
 *      <queue1>
 *      ...
 *      <queueN>
 *
 * <queueX> can be of two types:
 *      A. a printer character device, an ordinary file or a link to such;
 *      B. a directory.
 *
 * In case A lpd just dumps the data it receives from client (lpr) to the
 * end of queue file/device. This is non-spooling mode.
 *
 * In case B lpd enters spooling mode. It reliably saves client data along
 * with control info in two unique files under the queue directory. These
 * files are named dfAXXXHHHH and cfAXXXHHHH, where XXX is the job number
 * and HHHH is the client hostname. Unless a printing helper application
 * is specified lpd is done at this point.
 *
 * NB: file names are produced by peer! They actually may be anything at all.
 * lpd only sanitizes them (by removing most non-alphanumerics).
 *
 * If HELPER-PROG (with optional arguments) is specified then lpd continues
 * to process client data:
 *      1. it reads and parses control file (cfA...). The parse process
 *      results in setting environment variables whose values were passed
 *      in control file; when parsing is complete, lpd deletes control file.
 *      2. it spawns specified helper application. It is then
 *      the helper application who is responsible for both actual printing
 *      and deleting of processed data file.
 *
 * A good lpr passes control files which when parsed provides the following
 * variables:
 * $H = host which issues the job
 * $P = user who prints
 * $C = class of printing (what is printed on banner page)
 * $J = the name of the job
 * $L = print banner page
 * $M = the user to whom a mail should be sent if a problem occurs
 *
 * We specifically filter out and NOT provide:
 * $l = name of datafile ("dfAxxx") - file whose content are to be printed
 *
 * lpd provides $DATAFILE instead - the ACTUAL name
 * of the datafile under which it was saved.
 * $l would be not reliable (you would be at mercy of remote peer).
 *
 * Thus, a typical helper can be something like this:
 * #!/bin/sh
 * cat ./"$DATAFILE" >/dev/lp0
 * mv -f ./"$DATAFILE" save/
 */
//config:config LPD
//config:   bool "lpd"
//config:   default y
//config:   help
//config:     lpd is a print spooling daemon.

//applet:IF_LPD(APPLET(lpd, BB_DIR_USR_SBIN, BB_SUID_DROP))

//kbuild:lib-$(CONFIG_LPD) += lpd.o

//usage:#define lpd_trivial_usage
//usage:       "SPOOLDIR [HELPER [ARGS]]"
//usage:#define lpd_full_usage "\n\n"
//usage:       "SPOOLDIR must contain (symlinks to) device nodes or directories"
//usage:     "\nwith names matching print queue names. In the first case, jobs are"
//usage:     "\nsent directly to the device. Otherwise each job is stored in queue"
//usage:     "\ndirectory and HELPER program is called. Name of file to print"
//usage:     "\nis passed in $DATAFILE variable."
//usage:     "\nExample:"
//usage:     "\n    tcpsvd -E 0 515 softlimit -m 999999 lpd /var/spool ./print"

#include "libbb.h"

// strip argument of bad chars
static char *sane(char *str)
{
    char *s = str;
    char *p = s;
    while (*s) {
        if (isalnum(*s) || '-' == *s || '_' == *s) {
            *p++ = *s;
        }
        s++;
    }
    *p = '\0';
    return str;
}

static char *xmalloc_read_stdin(void)
{
    // SECURITY:
    size_t max = 4 * 1024; // more than enough for commands!
    return xmalloc_reads(STDIN_FILENO, &max);
}

int lpd_main(int argc, char *argv[]) MAIN_EXTERNALLY_VISIBLE;
int lpd_main(int argc UNUSED_PARAM, char *argv[])
{
    int spooling = spooling; // for compiler
    char *s, *queue;
    char *filenames[2];

    // goto spool directory
    if (*++argv)
        xchdir(*argv++);

    // error messages of xfuncs will be sent over network
    xdup2(STDOUT_FILENO, STDERR_FILENO);

    // nullify ctrl/data filenames
    memset(filenames, 0, sizeof(filenames));

    // read command
    s = queue = xmalloc_read_stdin();
    // we understand only "receive job" command
    if (2 != *queue) {
 unsupported_cmd:
        printf("Command %02x %s\n",
            (unsigned char)s[0], "is not supported");
        goto err_exit;
    }

    // parse command: "2 | QUEUE_NAME | '\n'"
    queue++;
    // protect against "/../" attacks
    // *strchrnul(queue, '\n') = '\0'; - redundant, sane() will do
    if (!*sane(queue))
        return EXIT_FAILURE;

    // queue is a directory -> chdir to it and enter spooling mode
    spooling = chdir(queue) + 1; // 0: cannot chdir, 1: done
    // we don't free(s), we might need "queue" var later

    while (1) {
        char *fname;
        int fd;
        // int is easier than ssize_t: can use xatoi_positive,
        // and can correctly display error returns (-1)
        int expected_len, real_len;

        // signal OK
        safe_write(STDOUT_FILENO, "", 1);

        // get subcommand
        // valid s must be of form: "SUBCMD | LEN | space | FNAME"
        // N.B. we bail out on any error
        s = xmalloc_read_stdin();
        if (!s) { // (probably) EOF
            char *p, *q, var[2];

            // non-spooling mode or no spool helper specified
            if (!spooling || !*argv)
                return EXIT_SUCCESS; // the only non-error exit
            // spooling mode but we didn't see both ctrlfile & datafile
            if (spooling != 7)
                goto err_exit; // reject job

            // spooling mode and spool helper specified -> exec spool helper
            // (we exit 127 if helper cannot be executed)
            var[1] = '\0';
            // read and delete ctrlfile
            q = xmalloc_xopen_read_close(filenames[0], NULL);
            unlink(filenames[0]);
            // provide datafile name
            // we can use leaky setenv since we are about to exec or exit
            xsetenv("DATAFILE", filenames[1]);
            // parse control file by "\n"
            while ((p = strchr(q, '\n')) != NULL && isalpha(*q)) {
                *p++ = '\0';
                // q is a line of <SYM><VALUE>,
                // we are setting environment string <SYM>=<VALUE>.
                // Ignoring "l<datafile>", exporting others:
                if (*q != 'l') {
                    var[0] = *q++;
                    xsetenv(var, q);
                }
                q = p; // next line
            }
            // helper should not talk over network.
            // this call reopens stdio fds to "/dev/null"
            // (no daemonization is done)
            bb_daemonize_or_rexec(DAEMON_DEVNULL_STDIO | DAEMON_ONLY_SANITIZE, NULL);
            BB_EXECVP_or_die(argv);
        }

        // validate input.
        // we understand only "control file" or "data file" cmds
        if (2 != s[0] && 3 != s[0])
            goto unsupported_cmd;
        if (spooling & (1 << (s[0]-1))) {
            puts("Duplicated subcommand");
            goto err_exit;
        }
        // get filename
        chomp(s);
        fname = strchr(s, ' ');
        if (!fname) {
// bad_fname:
            puts("No or bad filename");
            goto err_exit;
        }
        *fname++ = '\0';
//      // s[0]==2: ctrlfile, must start with 'c'
//      // s[0]==3: datafile, must start with 'd'
//      if (fname[0] != s[0] + ('c'-2))
//          goto bad_fname;
        // get length
        expected_len = bb_strtou(s + 1, NULL, 10);
        if (errno || expected_len < 0) {
            puts("Bad length");
            goto err_exit;
        }
        if (2 == s[0] && expected_len > 16 * 1024) {
            // SECURITY:
            // ctrlfile can't be big (we want to read it back later!)
            puts("File is too big");
            goto err_exit;
        }

        // open the file
        if (spooling) {
            // spooling mode: dump both files
            // job in flight has mode 0200 "only writable"
            sane(fname);
            fd = open3_or_warn(fname, O_CREAT | O_WRONLY | O_TRUNC | O_EXCL, 0200);
            if (fd < 0)
                goto err_exit;
            filenames[s[0] - 2] = xstrdup(fname);
        } else {
            // non-spooling mode:
            // 2: control file (ignoring), 3: data file
            fd = -1;
            if (3 == s[0])
                fd = xopen(queue, O_RDWR | O_APPEND);
        }

        // signal OK
        safe_write(STDOUT_FILENO, "", 1);

        // copy the file
        real_len = bb_copyfd_size(STDIN_FILENO, fd, expected_len);
        if (real_len != expected_len) {
            printf("Expected %d but got %d bytes\n",
                expected_len, real_len);
            goto err_exit;
        }
        // get EOF indicator, see whether it is NUL (ok)
        // (and don't trash s[0]!)
        if (safe_read(STDIN_FILENO, &s[1], 1) != 1 || s[1] != 0) {
            // don't send error msg to peer - it obviously
            // doesn't follow the protocol, so probably
            // it can't understand us either
            goto err_exit;
        }

        if (spooling) {
            // chmod completely downloaded file as "readable+writable"
            fchmod(fd, 0600);
            // accumulate dump state
            // N.B. after all files are dumped spooling should be 1+2+4==7
            spooling |= (1 << (s[0]-1)); // bit 1: ctrlfile; bit 2: datafile
        }

        free(s);
        close(fd); // NB: can do close(-1). Who cares?

        // NB: don't do "signal OK" write here, it will be done
        // at the top of the loop
    } // while (1)

 err_exit:
    // don't keep corrupted files
    if (spooling) {
#define i spooling
        for (i = 2; --i >= 0; )
            if (filenames[i])
                unlink(filenames[i]);
    }
    return EXIT_FAILURE;
}