source: branches/3.2/mindi/mindi @ 3515

Last change on this file since 3515 was 3515, checked in by bruno, 2 years ago

Fix xorriso usage for mindi with option -as mkisofs
Better ISO_CMD variable management

  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 123.2 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3515 2016-02-17 23:06:40Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38MRCFG=mondorestore.cfg
39
40# Temporary directory for mindi
41TMPDIR=${TMPDIR:=/tmp}
42if [ ! -d $TMPDIR ]; then
43    mkdir -p $TMPDIR
44fi
45
46EXTRA_SPACE=120000      # increase if you run out of ramdisk space
47BOOT_SIZE=86000         # size of the boot disk in KB
48
49PROMPT_MAKE_CD_IMAGE="yes"
50    # Ask if you want to make a CD Image to be written?
51    # if this is set to 'no', then the image will be created automatically
52
53PROMPT_MAKE_USB_IMAGE="yes"
54    # Ask if you want to make a USB Image to be written?
55    # if this is set to 'no', then the image will be created automatically
56
57USE_OWN_KERNEL="yes"
58    # If set to "no", you will be prompted for whether or not
59    # you want to use your own kernel, or the supplied default.
60    # If "yes" mindi will automatically use your own kernel.
61
62KERNEL_IS_XEN="no"
63    # If set to "no", the kernel is not a Xen kernel
64    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
65xenkernelpath=""
66 
67MY_FSTAB=/etc/fstab
68TAPE_MODS="ht st osst ide-tape ide_tape"
69SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
70
71# ide-probe-mod
72IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc"
73PCMCIA_MODS="pcmcia_core ds yenta_socket"
74USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
75NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
76CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs nls_utf8"
77# Replace with that line for HP OCMP e.g.
78#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
79DENY_MODS="kqemu vxfen"
80# Force some modules to be included
81FORCE_MODS=""
82
83LOGFILE=/var/log/mindi.log
84BOOT_MEDIA_MESSAGE="\
85To format and restore all files automatically, type '0enuke07' <enter>.\n\
86To restore some/all files interactively, type '0einteractive07' <enter>.\n\
87To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
88To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
89\n\
90You may add one or more parameters as well as per the function keys below\n\
91e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
92\n\
93If restoring from a local external disk or USB key, do not connect it \n\
94until the boot-up has finished.\n\
95\n\
96\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
97"
98FDISK=$MINDI_SBIN/mr-parted2fdisk
99
100# Using a config file allow to overwrite some values
101MINDI_CONFIG="$MINDI_CONF/mindi.conf"
102if [ -f $MINDI_CONFIG ]; then
103    . $MINDI_CONFIG
104fi
105DEPLIST_FILE="$MINDI_CONF/deplist.txt"
106DEPLIST_DIR="$MINDI_CONF/deplist.d"
107
108# Debian 8 system e.g. use xorriso for UEFI support.
109# However, they use exactly the same command line parameters as mkisofs, so just
110# use it if it's available.
111ISO_CMD="/usr/bin/xorriso"
112
113# Mandriva system e.g. use cdrkit, which uses genisoimage.
114# However, they use exactly the same command line parameters as mkisofs, so just
115# use it if it's available.
116if [ ! -x $ISO_CMD ]; then
117    ISO_CMD="/usr/bin/genisoimage"
118    # For compatibility with previous versions default to mkisofs
119    if [ ! -x $ISO_CMD ]; then
120        ISO_CMD="/usr/bin/mkisofs"
121    fi
122    if [ ! -x $ISO_CMD ]; then
123        LogFile "NOTE: No CD image (ISO file) utility found"
124        ISO_CMD = ""
125    fi
126else
127    ISO_CMD="/usr/bin/xorriso -as mkisofs"
128fi
129
130
131
132ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
133
134# Mindi set this as default in case it's invoked alone
135BOOT_TYPE="BIOS"
136# and we also check whether we're UEFI or not.
137if [ -d "/sys/firmware/efi" ]; then
138    BOOT_TYPE="UEFI"
139    ISO_OPT="$ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
140    echo "$ISO_CMD" | grep -q "xorriso"
141    if [ $? -eq 0 ]; then
142        ISO_OPT="$ISO_OPT -eltorito-alt-boot --efi-boot images/mindi-bootroot.img -no-emul-boot"
143    fi
144else
145    # Find MBR in case of bootable USB device to build
146    MBRFILE=/usr/lib/syslinux/mbr.bin
147    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
148    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
149    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
150    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
151fi
152
153# Function to log on screen only
154LogScreen() {
155        if [ -e /dev/stderr ] ; then
156        echo -e "$1" >> /dev/stderr
157    elif [ -e /usr/bin/logger ] ; then
158        /usr/bin/logger -s $1
159    fi
160}
161
162# Function to log in log file only
163LogFile() {
164
165    echo -e "$1" >> $LOGFILE
166    if [ _"$2" != _"" ]; then
167        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
168        rm -f "$2"
169    fi
170}
171
172# Function to log in both screen and logfile
173LogAll() {
174    LogScreen "$1"
175    LogFile "$1" "$2"
176}
177
178# Preserved for compatibility
179LogIt() {
180    LogAll "$1" "$2"
181}
182
183# Last function called before exiting
184# Parameter is exit code value
185# Should be declared here as used immediately below potentialy
186MindiExit() {
187    LogFile "Mindi $MINDI_VERSION is exiting" 
188    LogFile "End date : `date`" 
189    if [ _"$MONDO_SHARE" != _"" ] ; then
190        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
191        if [ -f $LOGFILE ]; then
192            cat $LOGFILE >> /var/log/mondoarchive.log
193        else
194            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
195        fi
196        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
197    fi
198
199    cd /
200    sync&
201
202    # Clean temporary files only when standalone mindi
203    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
204        rm -Rf $MINDI_TMP
205    fi
206    exit $1
207}
208
209Die() {
210    local i
211    if [ "$1" = "" ] ; then
212        LogAll "FATAL ERROR"
213    else
214        LogAll "FATAL ERROR. $1"
215    fi
216    if [ _"$2" != _"" ]; then
217        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
218    fi
219    rm -f "$2"
220
221    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
222    LogAll "See http://www.mondorescue.org for more information."
223    LogAll "WE CANNOT HELP unless you enclose that file.\n"
224    MindiExit -1
225}
226
227# Now we can create what we need
228MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
229if [ $? -ne 0 ]; then
230    df $TMPDIR
231    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
232fi
233if [ _"$MINDI_TMP" = _"" ]; then
234    Die "MINDI_TMP is empty, aborting"
235fi
236if [ _"$MINDI_TMP" = _"/" ]; then
237    Die "MINDI_TMP is /, aborting"
238fi
239export MINDI_TMP
240
241# ----------------------------------------------------------------------------
242
243
244AbortHere() {
245    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
246    Die "Program is terminating in response to signal received from OS/user"
247}
248
249
250Aborted() {
251    trap SIGHUP SIGTERM SIGTRAP SIGINT
252    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
253    Die "User abort."
254}
255
256
257AddFileToCfgIfExists() {
258    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
259}
260
261
262AddKeyboardMappingFile() {
263    local mappath r included_list included_item i res ii sss
264    mappath=$1
265    KBDEPTH=$(($KBDEPTH+1))
266    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
267    if [ -e "$bigdir/$mappath" ] ; then
268        LogFile "INFO: $mappath already added"
269        return
270    elif [ -d "$bigdir/$mappath" ] ; then
271        echo "Cannot add $mappath: it's a directory. Sorry."
272        return
273    fi
274    LogFile "INFO: Added kbd map $mappath"
275    if [ ! -e "$mappath" ] ; then
276        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
277        if [ ! -e "$mappath" ] ; then
278            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
279            return
280        fi
281    else
282        echo -en "`basename $mappath | tr '.' '#' | sed 's/#kmap#gz//' | sed 's/#inc#gz//'` " | tr '#' '.'
283    fi
284
285    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
286    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
287        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
288    else
289        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
290    fi
291    for included_item in $included_list ; do
292        if [ ! -e "$included_item" ] ; then
293            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
294            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
295            for ii in $sss ; do
296                [ -e "$ii" ] && AddKeyboardMappingFile $ii
297            done
298        else
299            AddKeyboardMappingFile $included_item
300        fi
301    done
302}
303
304
305CopyDependenciesToDirectory() {
306    local outdir incoming counter d found tdir templog
307    outdir=$1
308    templog=$MINDI_TMP/$$.log
309    mkdir -p $outdir
310    incoming=`ReadLine`
311    counter=0
312    > $templog
313
314    while [ "$incoming" != "" ] ; do
315        # Non absolute file names should not arrive till here => skipped
316        if [ `echo "$incoming" | cut -c1` != '/' ]; then
317            LogAll "WARNING: Unable to handle $incoming"
318            incoming=`ReadLine`
319            continue
320        fi
321        # no parent directory of incoming should be a link, copy is not possible in that case
322        d=`dirname "$incoming"`
323        found="false"
324        while [ $d != "/" -a $found = "false" ]; do
325            [ -h "$d" ] && found="true"
326            d=`dirname "$d"`
327        done
328        if [ -d "$incoming" -a ! -h "$incoming" ]; then
329            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
330        elif [ -e "$incoming" ] && [ $found = "false" ]; then
331            if [ ! -h "$incoming" ]; then
332                tar cf - -C / $incoming 2> $templog | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
333            else
334                tdir=`dirname "$incoming"`
335                if [ ! -e "$outdir/$tdir" ]; then
336                    mkdir -p "$outdir/$tdir"
337                fi
338                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
339            fi
340            # Only uncompress modules if not using udevd
341            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
342                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
343            fi
344            [ -x "$outdir" ] && StripExecutable $outdir
345            counter=$(($counter+1))
346            LogProgress $counter $2
347        fi
348        incoming=`ReadLine`
349    done
350}
351
352
353CountItemsIn() {
354    local r
355    r=0
356    for q in $1 ; do
357        r=$(($r+1))
358    done
359    echo $r
360}
361
362
363DropOptimizedLibraries() {
364    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
365    filelist=$1
366    outdir=$2
367
368    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
369    if [ "$list_of_optimized_libraries" = "" ] ; then
370        return 0
371    fi
372    echo -en "Dropping i686-optimized libraries if appropriate"
373    for optimized_lib_name in $list_of_optimized_libraries ; do
374        echo -en "."
375        reason=""
376        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
377        echo "$vanilla_lib_name" >> $filelist
378        LogFile "INFO: Adding $vanilla_lib_name to filelist"
379        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
380        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
381
382        # This may return multiple files
383        for resolved in `mr-read-all-link $vanilla_lib_name`; do
384            LogFile "INFO: Adding as deps $resolved to filelist"
385            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
386            if [ "$vanilla_resolved_name" != "$resolved" ]; then
387                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
388                rmdir $outdir$resolved > /dev/null 2> /dev/null
389                ln -sf $vanilla_resolved_name $outdir$resolved
390                LogFile "INFO: Excluding deps $resolved" 
391                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
392                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
393                echo "$vanilla_resolved_name" >> $filelist.tmp
394                mv -f $filelist.tmp $filelist
395            fi
396        done
397    done
398    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
399    mv -f $filelist.tmp $filelist
400    echo -e "$DONE"
401}
402
403
404FindAndAddUserKeyboardMappingFile() {
405    local r res mapfile mappath included_item included_list keyfile mp locale
406    LogAll "INFO: Analyzing your keyboard's configuration."
407    KEYDIR=/usr/lib/kbd
408    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
409    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
410    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
411    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
412    if [ ! -e "$KEYDIR" ] ; then
413        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
414        return 0
415    fi
416    if [ -e "/etc/sysconfig/keyboard" ] ; then
417        LogFile "INFO: Red Hat-style config detected."
418        keyfile=/etc/sysconfig/keyboard
419    elif [ -e "/etc/vconsole.conf" ] ; then
420        LogFile "INFO: New Fedora style config detected."
421        keyfile=/etc/vconsole.conf
422    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
423        LogFile "INFO: Slackware-style config detected."
424        keyfile=/etc/rc.d/rc.keymap
425    elif [ -e "/etc/rc.config" ] ; then
426        LogFile "INFO: Debian-style config detected."
427        keyfile=/etc/rc.config
428    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
429        LogFile "INFO: Debian-style config detected."
430        mkdir -p $bigdir/tmp
431        echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
432        KBDEPTH=0
433        mkdir -p $bigdir/etc/console
434        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
435        echo ""
436        echo -e "$DONE"
437        return 0
438    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
439        LogFile "INFO: Ubuntu-style config detected."
440        mkdir -p $bigdir/tmp
441        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
442            kbdfile="/etc/console-setup/boottime.kmap.gz"
443        else
444            kbdfile="/etc/console-setup/cached.kmap.gz"
445        fi
446        echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
447        KBDEPTH=0
448        mkdir -p $bigdir/etc/console-setup
449        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
450        echo ""
451        echo -e "$DONE"
452        return 0
453    elif [ -e "/etc/rc.conf" ] ; then
454        LogFile "INFO: ArchLinux config detected."
455        keyfile=/etc/rc.conf
456    elif [ -e "/etc/conf.d/keymaps" ] ; then
457        LogFile "INFO: Gentoo-style config detected."
458        keyfile=/etc/conf.d/keymaps
459    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
460        LogFile "INFO: X11-style config detected."
461        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
462    else
463        LogFile "Searching for rc.config ..."
464        keyfile=`find /etc -name rc.config | head -n1`
465        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
466            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
467            return
468        else
469            LogFile "INFO: Found $keyfile"
470        fi
471    fi
472    if [ ! -e "$KEYDIR/keymaps" ] ; then
473        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
474        return
475    fi
476    LogFile "INFO: keyfile=$keyfile"
477    # For SLES we need to remove the .map.gz extension Cf #614
478    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
479    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
480    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo, ArchLinux & New fedora
481    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
482    LogFile "INFO: locale=$locale"
483    #
484    # Process the keymaps dir once for all
485    # AddKeyboardMappingFile will use it recursively
486    #
487    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
488    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
489    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
490    # If we have multiple keymaps then log it !!
491    echo "$mp" | grep -q " " >> $LOGFILE
492    if [ $? -eq 0 ]; then
493        LogAll "WARNING: Multiple keymaps found: $mp"
494        LogFile "INFO: The following one will be used"
495    fi
496    for i in $mp ; do
497        mappath=$i
498        [ -e "$i" ] && [ ! -d "$i" ] && break
499    done
500    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
501        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
502    fi
503    LogFile "INFO: mappath = $mappath"
504    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
505        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
506        return
507    fi
508    LogAll "INFO: Adding the following keyboard mapping tables: "
509    mkdir -p $bigdir/tmp
510    echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
511    KBDEPTH=0
512    AddKeyboardMappingFile $mappath
513    echo ""
514    echo -e "$DONE"
515    rm -f $MINDI_TMP/keymaps.find
516    return 0
517}
518
519
520FindLdlinux32Binary() {
521    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
522    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
523    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
524    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
525    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
526    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
527    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
528    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
529    if [ ! -e "$LDLINUXC32" ]; then 
530        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
531        LDLINUXC32=/tmp/idoesnthopefullyexist
532    else
533        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
534    fi
535}
536
537
538FindMboot32Binary() {
539    MBOOTC32=/usr/lib/syslinux/mboot.c32
540    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
541    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
542    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
543    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
544    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
545    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
546    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
547    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
548    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
549}
550
551FindLdlinuxe64Binary() {
552    LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
553    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
554    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
555    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
556    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
557    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
558    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 | grep -x "/.*/ldlinux.e64"`
559    [ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
560    LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
561}
562
563FindSyslinux64EFI() {
564    SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
565    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
566    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
567    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
568    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
569    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
570    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi | grep -x "/.*64/syslinux.efi"`
571    [ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
572    LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
573}
574
575FindIsolinuxBinary() {
576    ISOLINUX=/usr/lib/isolinux.bin
577    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
578    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
579    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
580    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
581    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
582    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
583    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
584    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
585    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
586}
587
588
589GenerateGiantDependencyList() {
590    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
591
592    echo -en "Analyzing dependency requirements"
593    outfile=$1
594    tempfile=$MINDI_TMP/$$.txt
595    incoming=`ReadLine`
596
597    > $tempfile
598    progress=0
599    res=0
600    noof_lines=$2
601    while [ "$incoming" != "" ] ; do
602        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
603            incoming=`ReadLine`
604            continue
605        fi
606        if [ "$incoming" = "LVMFILES:" ] ; then
607            break
608        fi
609        filelist=`GenerateListForFile "$incoming"`
610        r=$?
611        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
612        res=$(($res+$r))
613#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
614        for fname in $filelist ; do
615            [ "$fname" != "" ] && echo "$fname" >> $tempfile
616        done
617        progress=$(($progress+1))
618        LogProgress $progress $noof_lines
619        incoming=`ReadLine`
620    done
621    if  [ "$incoming" = "LVMFILES:" ] ; then
622        incoming=`ReadLine`
623        lvmversion=""
624        while [ "$incoming" != "" ] ; do
625            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
626                incoming=`ReadLine`
627                continue
628            fi
629            filelist=`GenerateListForFile "$incoming"`
630            for tool in $filelist ; do
631                lvmresolved=`readlink -f $tool`
632                if [ "$tool" = "$lvmresolved" ]; then
633                    echo "$tool" >> $tempfile
634                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
635                    if [ "$lvmversion" = "" ] ; then
636                        lvmversion=`$lvmresolved`
637                        echo "$lvmresolved" >> $tempfile
638                    fi
639                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
640                    if [ "$lvmversion" = "200" ]; then
641                        # pvdata and lvmcreate_initrd don't exist in LVM2
642                        case "$toolstripped" in
643                        "pvdata")
644                            continue
645                            ;;
646                        "lvmcreate_initrd")
647                            continue
648                            ;;
649                        esac
650                    fi
651                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
652                    if [ -e "$toolpath" ] ; then
653                        echo "$toolpath" >> $tempfile
654                        echo "$tool" >> $tempfile
655                    else
656                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
657                    fi
658                    if [ -e "$toolpath" ] ; then
659                        echo "$toolpath" >> $tempfile
660                        echo "$tool" >> $tempfile
661                    else
662                        echo "Where are your LVM-Tools? Couldn't find $tool"
663                    fi
664                else
665                    echo "$tool" >> $tempfile
666                fi
667            done
668            progress=$(($progress+1))
669            LogProgress $progress $noof_lines
670            incoming=`ReadLine`
671        done
672    fi
673    echo -en "$DONE\nMaking complete dependency list"
674
675    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
676    mv -f $tempfile.new $tempfile
677    > $outfile.pre
678    progress=0
679    noof_lines=`cat $tempfile | wc -l`
680    LogFile "---------------------------------"
681    LogFile "List of dependencies:             "
682    LogFile "---------------------------------"
683    for fname in `cat $tempfile` ; do
684        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
685        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
686        progress=$(($progress+1))
687        LogProgress $progress $noof_lines
688    done
689    if [ _"$MONDO_SHARE" != _"" ]; then
690        mkdir -p $bigdir/tmp
691        mkdir -p $bigdir/usr/bin
692        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
693            LogAll "\nINFO: Incorporating post-nuke tarball"
694            old_pwd=`pwd`
695            cd "$bigdir"
696            tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
697            cd "$old_pwd"
698        fi
699        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
700            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
701        else
702            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
703            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
704            LogIt "       If Mindi was called by Mondo then send a bug report."
705            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
706            LogIt "       Finally, run Mindi again."
707            Die "Odd."
708        fi
709        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
710        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
711            LogAll "\nINFO: Incorporating Network-related settings"
712            for r in NETFS-* ; do
713                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
714                LogFile "INFO: Copying $r to ramdisk"
715            done
716        fi
717    fi
718    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
719    rm -f $tempfile $outfile.pre
720    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
721    return $res
722}
723
724
725GenerateListForFile() {
726    local files_found loc fname incoming i res
727    incoming="$1"
728    files_found=""
729    res=0
730
731    for fname in $incoming ; do
732        files_found="$files_found `LocateFile $fname`"
733    done
734
735    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
736}
737
738
739# Returns all disk devices which are part of a raid array
740GetAllRaidMembers() {
741    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
742}
743
744
745GetFileSizeList() {
746    local i
747    for i in `find $1 -type d -o -print` ; do
748        du -sk $i
749    done
750}
751
752
753# Check kernel filesystem capabilites for accessing initrd image
754# Could be ext2 FS (old mode) or initramfs (new mode)
755#
756# Interface definition:
757# param #1: absolute path to kernel image
758GetInitrdFilesystemToUse() {
759
760    # interface test: make sure we have one parameter
761    if [ $# -ne 1 ]; then
762        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
763    fi
764
765    # interface parameters
766    local lvKernelImage=$1
767
768    # local constants (filesystem magic strings)
769    local lcMagicCramfs="<3>cramfs: wrong magic"
770    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
771    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
772    local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|[<]*6[>]*Trying to unpack rootfs image as initramfs"
773
774    # local variables
775    local lvOffset
776    local lvScanRes
777    local lvUseFilesystem
778
779    # say where we are.
780    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
781
782    # verify that file exists
783    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
784
785    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
786    file $lvKernelImage 2>&1 | grep -q gzip
787    if [ $? -eq 0 ]; then
788        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
789        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
790    else
791        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
792        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
793        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
794        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
795        if [ $lvOffset -eq 0 ]; then
796            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
797            lvScanRes=$lcMagicInitfs
798        else
799            lvOffset=`expr $lvOffset / 2`
800            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
801            # scan again  kernel image
802            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
803        fi
804    fi
805
806    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
807    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
808        lvUseFilesystem="ext2fs"
809    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
810        lvUseFilesystem="ext3fs"
811    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
812        lvUseFilesystem="initramfs"
813    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
814        lvUseFilesystem="cramfs"
815    else
816        # In that case, we are most probably after 2.6.30 and use the supported initramfs
817        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
818        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
819        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
820        lvUseFilesystem="initramfs"
821    fi
822
823    # say what we are using
824    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
825
826    # return file system to use
827    echo "$lvUseFilesystem"
828
829}
830
831# Searches members of raid device
832# $1: raid device (/dev/md...)
833GetRaidDevMembers() {
834    if [ ! -f /etc/raidtab ]; then 
835        return
836    fi
837    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
838}
839
840
841ListAllPartitions() {
842    local res currline partition all_partitions ap_orig remaining i j
843
844    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
845    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
846    if [ -e "/vmfs/volumes" ]; then
847        # For VMWare ESX 3 get the device names of these volumes
848        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
849    fi
850    return
851}
852
853
854ListImagesForUser() {
855    local path fname
856    path=$MINDI_CACHE
857    echo -en "In the directory '$path' you will find the images:-\n"
858    for fname in `ls $path | grep -F mindi-` ; do
859        printf "%19s " $fname
860    done
861    echo " "
862}
863
864
865ListKernelModulePaths() {
866    local module_list module fname r kern
867    module_list="$MODULES"
868    # Remove unwanted modules from list
869    for i in $DENY_MODS; do
870        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
871    done
872###
873### Sq-Modification ... Use kernelname for module search path if specified
874###
875    if [ "${kernelname}" != "" ]
876    then
877        kern=${kernelname}
878    else
879        kern="$KERVERRUN"
880    fi
881    export KERVER=$kern
882###
883### Sq-Mod End
884###
885    # Get rid of duplicates
886    for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do
887        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
888        if [ -z "$r" ]; then
889            if [ "`echo "$MODULES" | grep -w $module`" ]; then
890                r="[live module file not found]"
891            else
892                r="[extra module file not found]"
893            fi
894        else
895            [ -f "$r" ] && echo "$r"
896        fi
897        LogFile "INFO: module $module --> $r"
898    done
899    find /lib/modules/$kern/modules.* -type f 2> /dev/null
900}
901
902#
903# Critical function which computes all dependencies (dyn. lib.)
904# for a list of binaries
905#
906LocateDeps() {
907    local incoming fname deps
908    incoming="$*"
909    deps=""
910
911    for fname in $incoming ; do
912        if [ ! -e "$fname" ] ; then
913            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
914            if echo $fname | grep lvm &> /dev/null ; then
915                LogFile "          This warning only affects you if you are using LVM."
916                if echo "$MODULES" | grep lvm &> /dev/null ; then
917                    LogFile "          I think you are, so please take heed!"
918                else
919                    LogFile "          I don't think you are, so don't worry about it."
920                fi
921            fi
922        else
923            deps="$deps $fname" 
924        fi
925    done
926    mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
927}
928
929
930LocateFile() {
931    local i j path fname_to_find location output resolved tmp stub cache_id loclist
932    fname_to_find="$1"
933    # It's an absolute path
934    j=`echo "$fname_to_find" | cut -c1`
935    if [ _"$j" = _"/" ]; then
936        dn=`dirname $fname_to_find`
937        # We suppose that the link is already included, just add the new file
938        if [ -h "$dn" ]; then
939            newdn=`readlink -f $dn`
940            bn=`basename $fname_to_find`
941            output="$newdn/$bn"
942        else
943            output="$fname_to_find"
944        fi
945        if [ -h "$output" ] ; then
946            output="`mr-read-all-link $output` $output"
947        fi
948        echo "$output"
949        return 0
950    fi
951    # It's not an absolute path
952    output=""
953    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
954    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
955        [ -h "$path" ] && continue
956        [ ! -e "$path/$fname_to_find" ] && continue
957        output="$path/$fname_to_find $output"
958        if [ -h "$path/$fname_to_find" ] ; then
959            output="`mr-read-all-link $path/$fname_to_find` $output"
960        fi
961    done
962    if [ "$output" = "" ] ; then
963        return 1
964    fi
965    echo "$output"
966    return 0
967}
968
969LogProgress() {
970    local i progress modres noof_lines title
971 
972    progress=$1
973    noof_lines=$2
974    title=$3
975
976    i=$(($progress*100))
977    if [ $noof_lines -ne 0 ]; then
978        i=$(($i/$noof_lines))
979    else
980        i=0
981    fi
982
983    if [ _"$MONDO_SHARE" != _"" ]; then 
984        echo "$title        $i%"
985    else
986        echo -en "\r\t\t\t\t\t\t\t\t"
987        echo -en "$i"
988        echo -en "%"
989        modres=$(($progress%4))
990        [ "$modres" -eq "0" ] && echo -en "\t/"
991        [ "$modres" -eq "1" ] && echo -en "\t-"
992        [ "$modres" -eq "2" ] && echo -en "\t\\"
993        [ "$modres" -eq "3" ] && echo -en "\t|"
994    fi
995}
996
997# Called by TurnTgzIntoRdz, to make /tmp/$MRCFG
998MakeMondoConfigFile() {
999    local outfile use_lzo use_comp use_star
1000    outfile=$1
1001    > $outfile
1002    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
1003    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
1004    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
1005    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
1006    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
1007    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
1008    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
1009    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
1010    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
1011    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
1012    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
1013    echo "use-lzo $use_lzo" >> $outfile
1014    echo "use-gzip $use_gzip" >> $outfile
1015    echo "use-star $use_star" >> $outfile
1016    echo "use-lzma $use_lzma" >> $outfile
1017    echo "use-comp $use_comp" >> $outfile
1018    echo "boot-type $BOOT_TYPE" >> $outfile
1019    echo "datestamp `date`" >> $outfile
1020    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
1021    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1022    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1023    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1024    AddFileToCfgIfExists $MINDI_TMP/ISO-DIR           iso-dir           $outfile
1025    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1026    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1027    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver    $outfile
1028    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1029    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1030    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1031    AddFileToCfgIfExists $MINDI_TMP/ACL               acl               $outfile
1032    AddFileToCfgIfExists $MINDI_TMP/XATTR             xattr             $outfile
1033    AddFileToCfgIfExists $MINDI_TMP/OBDR              obdr              $outfile
1034
1035    # Deal with network configuration in a portable way
1036    if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
1037        mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
1038    fi
1039}
1040
1041# Get PV's for an LV
1042GetPVsForLV() {
1043    if [ -n "$1" ]; then
1044        vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1045        if [ -z "$vg" ]; then
1046            return
1047        fi
1048        $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1049    fi
1050}
1051
1052
1053MakeMountlist() {
1054    local mountlist all_partitions current_partition \
1055partition_size partition_format outstring partition_number \
1056partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1057absolute_partition old_partition_fmt current_lvolume uname skip
1058
1059    LogFile "------------------------------------"
1060    LogFile "Your raw fstab file looks like this:"
1061    LogFile "------------------------------------"
1062    cat $MY_FSTAB >> $LOGFILE
1063    LogAll "-----------------------------------"
1064    LogAll "Your mountlist will look like this:"
1065    LogAll "-----------------------------------"
1066
1067# mountlist(OUT)
1068    mountlist=$1
1069
1070# NB: partition = device
1071# NB: mountpt = where the device is mounted
1072
1073    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1074
1075    [ "$mountlist" != "" ] && rm -Rf $mountlist
1076    > $mountlist
1077    all_partitions=""
1078   
1079    if [ $LVM != "false" ]; then
1080        LogFile "INFO: Analyzing LVM..."
1081        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1082        if [ $? -ne 0 ]; then
1083            LVM="false"
1084        fi
1085        # Excluded LVs and GVs are not reported here
1086        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1087    fi
1088    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1089    for i in $IMAGE_DEVS ; do
1090        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1091    done
1092    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1093    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1094    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1095    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1096    for c_p in $all_partitions ; do
1097        # Skip fd/cd devices, network FS, cifs
1098        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1099        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1100        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1101            current_partition=`readlink -f $c_p`
1102            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1103                current_partition="$c_p"
1104            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1105                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1106                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1107            fi
1108            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1109        else
1110            current_partition="$c_p"
1111        fi
1112        [ "$c_p" = "none" ] && continue
1113        redhat_label=""
1114        label=""
1115        uuid=""
1116        absolute_partition=`readlink -f $c_p`
1117        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1118
1119        # set default in case we dont't find it
1120        str_to_find_fmt_with=$current_partition
1121
1122        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1123        # current_partition contains only first column of /etc/fstab
1124        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1125            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1126            actual_dev=""
1127
1128            # 1st try, findfs - the RHEL way of finding labels and their partitions
1129            if [ -x "/sbin/findfs" ]; then
1130                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1131            fi
1132   
1133            # 2nd try : blkid, the good way for all LABEL except swap
1134            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1135                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1136                # For LVM FS it will give a /dev/dm-# which should then be converted
1137                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1138                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1139                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1140                    for dev in `ls /dev/mapper/*`; do
1141                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1142                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1143                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1144                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1145                            break
1146                        fi
1147                    done
1148                fi
1149            fi
1150   
1151            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1152            # For LVM gives a /dev/mapper entry
1153            if [ "x$actual_dev" = "x" ]; then
1154                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1155            fi
1156   
1157            # 4th try, with vol_id
1158            # SWAP only
1159            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1160                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1161                for dev_swap in $list_swaps ; do
1162                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1163                    if [ "x$dev_exists" != "x" ]; then
1164                        actual_dev=$dev_swap
1165                        break;
1166                    fi
1167                done
1168            fi
1169
1170            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1171            # LABEL=SW-cciss/c0d0p3 (RDP)
1172            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1173            # SWAP only
1174            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1175                    skip=""
1176                    uname=$KERVERRUN
1177                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1178                    # 2.6.12 needs 16 (FC3)
1179                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1180                    # 2.6.19 and upper needs 1052
1181                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1182                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1183                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1184                    if [ $skip = "" ]; then
1185                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1186                    fi
1187                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1188                    do
1189                        # Location of the swap label for kernel 2.6
1190                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1191                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1192                            actual_dev=$try_dev
1193                        fi
1194                    done
1195            fi
1196
1197            # Check if one of all those tries has known success
1198            if [ "x$actual_dev" != "x" ]; then
1199                current_partition=$actual_dev
1200            else
1201                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1202            fi
1203        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1204        # current_partition contains only first column of /etc/fstab
1205        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1206            uuid=`echo "$current_partition" | cut -d'=' -f2`
1207            actual_dev=""
1208
1209            # 1st try, findfs - the RHEL way of finding labels and their partitions
1210            if [ -x "/sbin/findfs" ]; then
1211                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1212            fi
1213   
1214            # 2nd try : blkid, the good way for all UUID except swap
1215            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1216                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1217                # For LVM FS it will give a /dev/dm-# which should then be converted
1218                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1219                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1220                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1221                    for dev in `ls /dev/mapper/*`; do
1222                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1223                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1224                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1225                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1226                            break
1227                        fi
1228                    done
1229                fi
1230            fi
1231   
1232            # 3th try, with vol_id
1233            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1234                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1235                for dev in $list_dev ; do
1236                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1237                    if [ "x$dev_exists" != "x" ]; then
1238                        actual_dev=$dev
1239                        break;
1240                    fi
1241                done
1242            fi
1243
1244            # 4th try, with dumpuuid (VMWare only ?) for swap
1245            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1246                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1247                for dev in $list_dev ; do
1248                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1249                    if [ "x$dev_exists" != "x" ]; then
1250                        actual_dev=$dev
1251                        break;
1252                    fi
1253                done
1254            fi
1255
1256            # Check if one of all those tries has known success
1257            if [ "x$actual_dev" != "x" ]; then
1258                current_partition=$actual_dev
1259            else
1260                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1261            fi
1262        else
1263            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1264            # they use symlinks in fstab unrelated to what is shown in mount !
1265            if [ _"$partition_mountpt" = _"" ]; then
1266                # set default in case we dont't find it
1267                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1268                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1269                            str_to_find_fmt_with=$tmpp
1270                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1271                            break;
1272                        fi
1273                done
1274            fi
1275        fi
1276
1277        # Detects noauto partitions not mounted and exclude them
1278        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1279        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1280                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1281            continue
1282        fi
1283        # Detects bind partitions and exclude them
1284        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1285                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1286            continue
1287        fi
1288
1289        # Look for devices which have to be excluded
1290        skip=0
1291        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1292            l=""
1293            list_of_devices="`mr-read-all-link $current_partition`"
1294            for d in $list_of_devices; do
1295                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1296            done
1297
1298            # Remove PVs from LVs excluded
1299            l="$l `GetPVsForLV $current_partition`"
1300
1301            # We want a single unique list
1302            list_of_devices="`echo $l | sort -u`"
1303
1304            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1305                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1306                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1307                    skip=1
1308                    continue
1309                fi
1310            done
1311        fi
1312        if [ $skip -eq 1 ]; then
1313            continue
1314        fi
1315
1316        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1317        # Detects iso9660 ISO images and exclude them
1318        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1319                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1320            continue
1321        fi
1322        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1323        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1324        # the former is then a link to the latter, so we test whether
1325        # $current_partition is actually such a link or not and set
1326        # $current_lvolume accordingly. On Debian you may find more than one answer
1327        # so we remove the one corresponding to /dev/.static
1328        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1329        # principle is the same and we need to find the link to it as well.
1330        # Note that $current_lvolume may well be an
1331        # ordinary device. It is just to make sure that we feed the right value
1332        # into any of the LVM tools if possible.
1333
1334        current_lvolume="$current_partition"
1335        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1336            # .static dir are a Debian specificity
1337            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1338            echo $current_lvolume | grep -q ' '
1339            if [ $? -eq 0 ]; then
1340                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1341            fi
1342            # if it's not found, it may well be a real device such as a multipath one
1343            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1344            if [ _"$current_lvolume" = _"" ]; then
1345                current_lvolume="$current_partition"
1346            fi
1347        fi
1348        #
1349        # End of LVM device style variation code (other than $current_lvolume).
1350
1351        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1352            # Size computed via LVM not directly
1353            partition_size="lvm"
1354        else
1355            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1356            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1357            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1358                # Skip swap files
1359                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1360                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1361                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1362                [ "$partition_format" != "swap" ] && partition_format="swap"
1363                if [ "$partition_size" = "" ] ; then
1364                    totalsize=0
1365                    items=0
1366                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1367                        totalsize=$(($totalsize+$i))
1368                        items=$(($items+1))
1369                    done
1370                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1371                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1372                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1373                fi
1374            else
1375                partition_size=`SizeOfPartition $current_partition`
1376            fi
1377        fi
1378        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1379        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1380        if [ "$partition_mountpt" = "" ] ; then
1381            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1382                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1383                    partition_mountpt="raid"
1384                    partition_format="raid"
1385                else
1386                    partition_mountpt="lvm"
1387                    partition_format="lvm"
1388                fi
1389            fi
1390        fi
1391        psz=$partition_size
1392        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1393        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1394        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1395            partition_mountpt="image"
1396            old_partition_fmt=$partition_format
1397            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1398            partition_size=$(($partition_size+1)); # just in case
1399            if [ "$partition_format" = "Linux" ] ; then
1400                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1401                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1402                partition_format=$old_partition_fmt
1403            fi
1404        fi
1405
1406        if [ ! "$partition_mountpt" ] ; then
1407            LogFile "------- $FDISK -l $qq log ------------"
1408            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1409                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1410                [ "$partition_format" ] && break
1411            done
1412            LogFile "------- $FDISK log end ------------"
1413            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1414                partition_format="compaq"
1415            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1416                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1417                continue
1418            fi
1419        fi
1420        if [ "$redhat_label" ]; then
1421            label="$redhat_label"
1422        elif [ "$uuid" ]; then
1423            label="$uuid"
1424        fi
1425
1426        # On RHEL 7 they use UUID concretely, even when not mentioned in fstab
1427        # in order to mount the root part e.g. in grub.
1428        # One way to solve this is to add the UUID now, if there wasn't one so it's
1429        # restored correctly
1430        if [ _"$label" = _"" ]; then
1431            label=`blkid $current_partition | perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
1432        fi
1433
1434        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1435        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1436        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1437        if [ "$current_partition" = "" ] ; then
1438            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1439        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1440            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1441                partition_mountpt=raid
1442                partition_format=raid
1443                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1444                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1445            else
1446                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1447            fi
1448        elif [ "$partition_format" = "" ] ; then
1449            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1450        elif [ "$partition_size" = "" ] ; then
1451            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1452        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1453            continue
1454        else
1455            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1456                LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1457                partition_format="vfat"
1458            fi
1459            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1460            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1461        fi
1462    done
1463    LogAll "-----------------------------------" 
1464}
1465
1466CheckMountlist() {
1467    local file=$1
1468    # Coherency verification
1469    ML01=`cat $file | wc -l`
1470    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1471    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1472    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1473    if [ "$ML01" -ne "$ML1" ]; then
1474        LogFile "--------------------------------------------"
1475        LogAll "WARNING: Duplicate device entry in mountlist"
1476        LogFile "--------------------------------------------"
1477    fi
1478    if [ "$ML02" -ne "$ML2" ]; then
1479        LogFile "--------------------------------------------"
1480        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1481        LogFile "------------------------------------------------"
1482    fi
1483}
1484
1485OfferToMakeBootableISO() {
1486    local i old_pwd files
1487    if [ -z "$ISO_CMD" ]; then
1488        LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
1489        return
1490    fi
1491    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1492        echo -en "Shall I make a bootable CD image? (y/[n]) "
1493        read i
1494        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1495    fi
1496    rm -Rf $MINDI_TMP/iso
1497    mkdir -p $MINDI_TMP/iso/{images,archives}
1498    files=`ls $MINDI_CACHE/{*.gz,*.img}`
1499    cp -f $files $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy files to $MINDI_TMP/iso/images"
1500    for i in memdisk memtest.bin memtest.img ; do
1501        j=$MINDI_LIB/$i
1502        k=$MINDI_TMP/iso
1503        if [ -e "$j" ] ; then
1504            LogAll "INFO: Copying $j to $k"
1505            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1506            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1507            if [ _"$MONDO_SHARE" != _"" ]; then 
1508                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1509            fi
1510        fi
1511    done
1512
1513    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1514    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1515
1516    # copy boot stuff now generated in PrepareDataDiskImage
1517    if [ "$BOOT_TYPE" = "UEFI" ]; then
1518        (cd $MINDI_TMP/iso ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
1519        tbc="EFI"
1520    else
1521        (cd $MINDI_TMP/iso ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
1522        tbc="syslinux"
1523    fi
1524
1525    MakeMessageFile $MINDI_TMP/iso/$tbc | cut -c1-80 > $MINDI_TMP/iso/$tbc/message.txt
1526
1527    if [ "$ARCH" != "ia64" ] ; then
1528        if [ $KERNEL_IS_XEN = "yes" ]; then
1529            FindMboot32Binary
1530            cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1531            cp $MBOOTC32 $MINDI_TMP/iso/$tbc/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/$tbc/mboot.c32). Did you run out of disk space?"
1532        fi
1533
1534        cp $ISOLINUX $MINDI_TMP/iso/$tbc/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1535
1536        if [ -e "$LDLINUXC32" ]; then
1537            cp $LDLINUXC32 $MINDI_TMP/iso/$tbc 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $MINDI_TMP/iso/$tbc. Did you run out of disk space?"
1538        fi
1539
1540        if [ _"$MONDO_SHARE" != _"" ]; then 
1541            cp -rf $MINDI_TMP/iso/{initrd.img,vmlinuz,$tbc} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1542            if [ $KERNEL_IS_XEN = "yes" ]; then
1543                cp -f $MINDI_TMP/iso/xen.gz $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen kernel to $MONDO_ROOT. Did you run out of disk space?"
1544            fi
1545            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1546        fi
1547        CMD="$ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
1548    else
1549        CMD="$ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.img -c images/boot.cat -no-emul-boot"
1550    fi
1551
1552    old_pwd=`pwd`
1553    cd "$MINDI_TMP/iso"
1554    LogFile "Invoking $CMD"
1555    $CMD . > /dev/null 2> $MINDI_TMP/mkisofs.log
1556    if [ "$?" -ne "0" ] ; then
1557        if [ "$BOOT_TYPE" = "UEFI" ]; then
1558            CMD=`echo $CMD | perl -p -e 's|--efi-boot |-eltorito-platform 0xEF -eltorito-boot |'`
1559            CMD=`echo $CMD | perl -p -e 's|-efi-boot |-eltorito-platform 0xEF -eltorito-boot |'`
1560            $CMD . > /dev/null 2> $MINDI_TMP/mkisofs.log
1561            if [ "$?" -eq "0" ] ; then
1562                LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1563            else
1564                MakeISOErrors
1565            fi
1566        else
1567            MakeISOErrors
1568        fi
1569    else
1570        LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1571    fi
1572    rm -f $MINDI_TMP/mkisofs.log
1573    cd "$old_pwd"
1574}
1575
1576MakeISOErrors() {
1577
1578LogFile "----------- $ISO_CMD's errors --------------"
1579LogAll "$CMD returned the following errors:"
1580cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1581LogAll "ERROR: Failed to create ISO image."
1582}
1583
1584
1585OfferToMakeBootableUSB() {
1586    local i files
1587    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1588        echo -n "Shall I make a bootable USB device ? (y/[n]) "
1589        read i
1590        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1591        if [ "$USBDEVICE" = "" ]; then
1592            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1593            read dev
1594            USBDEVICE=$dev
1595        fi
1596        echo "WARNING: This will erase all content on $USBDEVICE"
1597        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1598        read i
1599        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1600    fi
1601    rm -Rf $MINDI_TMP/usb
1602    mkdir -p $MINDI_TMP/usb
1603    USBPART="${USBDEVICE}1"
1604
1605    echo -en "Transforming $USBDEVICE in a Bootable device " 
1606    echo -en "."
1607    LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1608    LogFile "INFO: Checking $USBDEVICE"
1609    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1610    if [ $? -ne 0 ]; then
1611        LogAll "ERROR: Unable to access $USBDEVICE"
1612        LogAll "       Make sure your USB device is plugged in"
1613        MindiExit -1
1614    fi
1615    echo -en "."
1616    # Some distro do auto mount at that point (Ubuntu)
1617    LogFile "INFO: Unmounting $USBPART just in case"
1618    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1619    if [ "$BOOT_TYPE" = "BIOS" ]; then
1620        # If your key has no MBR it may cause an issue
1621        # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1622        if [ -r $MBRFILE ]; then
1623            LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1624            dd if=$MBRFILE of=$USBDEVICE
1625        else
1626            LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1627            LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1628        fi
1629    fi
1630    LogFile "INFO: Preparing $USBDEVICE"
1631    cat > $MINDI_TMP/fdisk.txt << EOF
1632d
1633d
1634d
1635d
1636n
1637p
16381
1639
1640
1641t
1642b
1643a
16441
1645w
1646EOF
1647    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1648    if [ $? -ne 0 ]; then
1649        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1650        LogAll "       Make sure your USB device is plugged in"
1651        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1652        MindiExit -1
1653    fi
1654    LogFile "fdisk build file"
1655    LogFile "----------------"
1656    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1657    LogFile "----------------"
1658    rm -f $MINDI_TMP/fdisk.txt
1659    LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1660    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1661    echo -en "."
1662    # Calling kpartx in case devices were not created
1663    if [ -x "/sbin/kpartx" ]; then
1664        /sbin/kpartx -a $USBDEVICE
1665    fi
1666    # Some distro do auto mount at that point (Ubuntu)
1667    LogFile "INFO: Unmounting $USBPART just in case again"
1668    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1669    echo -en "."
1670    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1671    if [ "`which dmsetup`" != "" ]; then
1672        block_id="`echo $USBPART | sed 's/\/dev\///g'`"
1673        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1674            LogFile "INFO: Removing $block_id from device mapper."
1675            sleep 1
1676            dmsetup remove $block_id
1677        fi
1678    fi
1679    echo -en "."
1680    LogFile "INFO: Creating a vfat filesystem on $USBPART"
1681    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1682    if [ $? -ne 0 ]; then
1683        LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1684        LogAll "       Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1685        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1686        MindiExit -1
1687    fi
1688    echo -en "."
1689    LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1690    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1691    if [ $? -ne 0 ]; then
1692        LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1693        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1694        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1695        MindiExit -1
1696    fi
1697    echo -en "."
1698    mkdir -p $MINDI_TMP/usb/images
1699    files=`ls $MINDI_CACHE/{*.gz,*.img}`
1700    cp -f $files $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy files to $MINDI_TMP/usb/images"
1701    echo -en "."
1702    for i in memdisk memtest.bin memtest.img ; do
1703        j=$MINDI_LIB/$i
1704        k=$MINDI_TMP/usb
1705        if [ -e "$j" ] ; then
1706            LogFile "INFO: Copying $j to $k"
1707            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1708            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1709        fi
1710    done
1711    echo -en "."
1712    MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1713    echo -en "."
1714    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1715    echo -en "."
1716    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1717    echo -en "."
1718    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1719    echo -en "."
1720    LogAll "----------- syslinux's conf --------------"
1721    cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1722    LogAll "------------------------------------------"
1723    umount $MINDI_TMP/usb
1724    if [ "$ARCH" != "ia64" ] ; then
1725        syslinux -v 2>&1 | grep -q 4.02
1726        if [ $? -eq 0 ]; then
1727            # This buggy version of syslinux requires a call to --stupid and not -s
1728            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1729            res=$?
1730        else
1731            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1732            res=$?
1733        fi
1734        if [ $res -ne 0 ] ; then
1735            LogAll "----------- syslinux's errors --------------"
1736            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1737            LogAll "------------------------------------------"
1738            LogIt "ERROR: Failed to create USB image."
1739        else
1740            echo -e "$DONE"
1741            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1742        fi
1743        rm -f $MINDI_TMP/syslinux.log
1744    else
1745        LogAll "ERROR: No USB boot support for ia64"
1746        MindiExit -1
1747    fi
1748}
1749
1750
1751MakeMessageFile() {
1752   
1753    if [ -x "/bin/lsb_release" ]; then
1754        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1755    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1756        DESC="Arch Linux"
1757        if [ -r /var/log/pacman.log ]; then
1758            # there are no releases but we can get the last system upgrade
1759            # Output example:   Arch Linux [2011-03-03 01:39]
1760            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1761        fi
1762    elif [ -x "/etc/os-release" ]; then
1763        DESC=`grep PRETTY_NAME /etc/os-release | cut -d= -f2`
1764    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1765        # For pb >= 0.9.8
1766        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4 | sed 's/,/-/g'`
1767    elif [ -r /etc/issue.net ]; then
1768        DESC=`head -1 /etc/issue.net`
1769    elif [ -r /etc/issue ]; then
1770        DESC=`head -1 /etc/issue`
1771    else
1772        DESC="Unknown desc"
1773    fi
1774    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1775    if [ _"$MONDO_SHARE" != _"" ]; then
1776        if [ "$CDRECOVERY" != "yes" ] ; then
1777            if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1778                echo -en "Press <0eenter07> for 0cnetwork restore07\n"
1779                echo -en "$BOOT_MEDIA_MESSAGE"
1780            elif [ ! "$MINDI_TMP" ] ; then
1781                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1782                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1783                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1784                fi
1785            else
1786                echo -en "$BOOT_MEDIA_MESSAGE"
1787            fi
1788        else
1789            echo -en "\
1790To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1791CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1792        fi
1793    fi
1794
1795    # Also create the other help screens
1796    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1797    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1798    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1799}
1800
1801
1802MakeBootConfFile() {
1803    local options i ooo
1804    options=""
1805    # Type of boot file (elilo or syslinux/isolinux)
1806    type=$1
1807    if [ "$type" = "elilo" ]; then
1808        sep="="
1809        sepdef="="
1810    else
1811        sep=" "
1812        sepdef=" "
1813        if [ "$type" = "grub" ]; then
1814            sepdef="="
1815        fi
1816    fi
1817
1818    # Generic header for conf file
1819    if [ "$type" = "elilo" ]; then
1820        echo -en "prompt\n"
1821    elif [ "$type" = "grub" ]; then
1822        echo -en "pause Press a key when ready to restore\n"
1823    else
1824        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1825    fi
1826
1827    # Compute which default option to boot from
1828    echo -en "default${sepdef}"
1829    if [ "$CDRECOVERY" = "yes" ] ; then
1830        if [ "$type" = "grub" ]; then
1831            # TODO: Which num ???
1832            echo -en "0\n"
1833        else
1834            echo -en "RESTORE\n"
1835        fi
1836    # In case it's mondoarchive
1837    elif [ _"$MONDO_SHARE" != _"" ]; then
1838        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1839            if [ "$type" = "grub" ]; then
1840                echo -en "3\n"
1841            else
1842                echo -en "iso\n"
1843            fi
1844        else
1845            if [ "$type" = "grub" ]; then
1846                echo -en "1\n"
1847            else
1848                echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
1849            fi
1850        fi
1851    else
1852        if [ "$type" = "grub" ]; then
1853            echo -en "0\n"
1854        else
1855            echo -en "expert\n"
1856        fi
1857    fi
1858
1859    # Handle timeout
1860    if [ "$CDRECOVERY" != "yes" ] ; then
1861        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1862    else
1863        echo -en "timeout${sep}10000\n"
1864    fi
1865    echo -en "\n"
1866
1867    # prepare which labels will be generated
1868    if [ "$CDRECOVERY" = "yes" ] ; then
1869        options="RESTORE expert"
1870    else
1871        if [ _"$MONDO_SHARE" != _"" ]; then
1872            options="interactive expert compare iso nuke isonuke"
1873        else
1874            options="expert"
1875        fi
1876    fi
1877
1878    # Generate rest of conf file
1879    for i in $options ; do
1880        ooo=$i
1881        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1882        if [ "$type" = "elilo" ]; then
1883            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1884        elif [ "$type" = "grub" ]; then
1885            outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
1886        else
1887            ps="/"
1888            if [ $KERNEL_IS_XEN = "no" ]; then
1889                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1890            else
1891                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1892            fi
1893        fi
1894        echo -en "$outstr"
1895    done
1896    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1897        if [ "$type" = "elilo" ]; then
1898            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1899            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1900        elif [ "$type" = "grub" ]; then
1901            echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
1902        else
1903            ps="/"
1904            if [ "$type" = "syslinux" ]; then
1905                ps=""
1906            fi
1907            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1908            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1909        fi
1910    fi
1911}
1912
1913PrepareBootDiskImage() {
1914    # LILO originally
1915    local dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootconf bootimage
1916    kernelpath=$1
1917    retval=0
1918
1919    old_pwd=`pwd`
1920    [ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
1921    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1922    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1923    imagefile=$MINDI_TMP/mindi-bootroot.img
1924    mkdir -p $mountpoint
1925    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1926    echo -en "..."
1927    #if [ "$BOOT_TYPE" = "UEFI" ]; then
1928        # Should be GPT in that case to allow direct boot
1929        #parted -s $imagefile mklabel gpt
1930        #parted -s $imagefile mkpart fat32 1 ${BOOT_SIZE}k 2> /dev/null
1931        #kpartx -a $imagefile
1932        #imagefile2=/dev/mapper/`kpartx -l $imagefile | awk '{print $1}'`
1933    #else
1934        #imagefile2=$imagefile
1935    #fi
1936    LogFile "INFO: Creating vfat filesystem on $imagefile"
1937    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1938
1939    if [ "$BOOT_TYPE" = "BIOS" ]; then
1940        # syslinux should be run on a  local file (doen't work through NFS Cf: #297)
1941        # and run after the formating for versions > 6 it seems
1942        syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1943    fi
1944
1945    # Only move it now to its final destination and use it now
1946    mv $imagefile $MINDI_CACHE
1947    imagefile=$MINDI_CACHE/mindi-bootroot.img
1948
1949    mount -t vfat -o loop $imagefile $mountpoint || Die "ERROR: Cannot mount $imagefile on $mountpoint (PBDI)"
1950
1951    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1952    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1953    if [ "$?" -ne "0" ] ; then
1954        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1955        LogAll "       Please unload some of your modules and try again."
1956        LogAll "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1957        LogAll "       Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1958        retval=$(($retval+1))
1959    fi
1960    #MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1961
1962    mkdir -p $mountpoint/tmp
1963    if [ -f "$MINDI_TMP/$MRCFG" ]; then
1964        cp -f $MINDI_TMP/$MRCFG $mountpoint/tmp
1965    fi
1966
1967    # copy the kernel across
1968    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1969    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1970    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1971
1972    retval=0
1973    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1974    retval=$?
1975    if [ $KERNEL_IS_XEN = "yes" ]; then
1976        cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
1977        let retval+=$?
1978    fi
1979 
1980    if [ "$retval" -ne "0" ] ; then
1981        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1982        du -sk $mountpoint/* >> $LOGFILE
1983        LogFile "--- end of list of files ---"
1984        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1985        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1986        cd "$old_pwd"
1987        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1988        rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
1989        [ "$imagefile" != "" ] && rm -f $imagefile
1990        LogIt "ERROR: Sorry, your kernel is too big for your image"
1991        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1992    fi
1993    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1994    LogFile "INFO: Free space left on image = $free_space KB"
1995    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1996
1997    # make it bootable
1998    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1999    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
2000
2001    # copy boot stuff now generated in PrepareDataDiskImage
2002    if [ "$BOOT_TYPE" = "UEFI" ]; then
2003        (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
2004    else
2005        (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
2006    fi
2007
2008    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2009    echo -en "..."
2010    rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2011
2012    if [ "$retval" -eq "0" ] ; then
2013        echo -en "...$DONE\n"
2014        LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2015    else
2016        echo -en "...failed\n"
2017        LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2018    fi
2019    [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning $retval"
2020    return $retval
2021}
2022
2023ParseModprobeForIncludes() {
2024local MODPROBE_CONF mpincfile includes include
2025
2026MODPROBE_CONF=/etc/modprobe.conf
2027mpincfile=$1
2028touch $mpincfile
2029if [ -a $MODPROBE_CONF ]; then
2030    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2031    if [ -n "$includes" ]; then
2032        for include in $includes
2033        do
2034            if [ -a "$include" ]; then
2035                echo $include >> $mpincfile
2036            fi
2037        done
2038    fi
2039fi
2040}
2041
2042
2043PrepareDataDiskImages() {
2044    local needlist bigdir diskdir res i j k old_pwd lines lfiles includefile
2045
2046    rm -f $MINDI_CACHE/mindi.iso
2047    needlist=$MINDI_TMP/what-we-need.txt
2048    bigdir=$MINDI_TMP/bigdir
2049    mkdir -p $bigdir/usr/bin
2050    mkdir -p $bigdir/usr/sbin
2051    includefile=$MINDI_TMP/$$.includefile.txt
2052
2053    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2054    if [ -e "$DEPLIST_FILE" ]; then
2055        lfiles="$DEPLIST_FILE $lfiles"
2056    fi
2057    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2058    ParseModprobeForIncludes $includefile
2059    lines=$(($lines+`cat $includefile | wc -l`))
2060    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2061    res=$?
2062    rm -f $includefile
2063    ListKernelModulePaths >> $needlist
2064    if [ "$res" -ne "0" ] ; then
2065        Die "You have $res files present in dependency list\nbut absent from filesystem."
2066    fi
2067    mkdir -p $bigdir/tmp
2068    if [ _"$MONDO_SHARE" != _"" ]; then
2069        # TODO: no reason to have the cfg file stored twice
2070        MakeMondoConfigFile $MINDI_TMP/$MRCFG
2071        cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
2072    fi
2073
2074    # Needs to be done after the MRCFG creation
2075    FindAndAddUserKeyboardMappingFile
2076
2077    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2078    DropOptimizedLibraries $needlist $bigdir
2079    echo -en "Assembling dependency files"
2080
2081    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2082
2083    # also copy io.sys and msdos.sys, if we can find them
2084    for i in `mount | cut -d' ' -f3` ; do
2085        for j in io.sys msdos.sys ; do
2086            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2087        done
2088    done
2089
2090    # master boot record, too
2091    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2092    if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
2093        LogAll "INFO: Backing up $i's MBR"
2094        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2095        sleep 1
2096        sync
2097        j=$i
2098        [ -h "$j" ] && j=`readlink -f $j`
2099        LogAll "INFO: Creating /dev/boot_device ($j)"
2100        mkdir -p $bigdir/dev
2101        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2102    fi
2103
2104    old_pwd=`pwd`
2105    cd "$bigdir"
2106
2107    # Get terminfo content
2108    ti="usr/share/terminfo/l"
2109    if [ -d /$ti ]; then
2110        mkdir -p $ti
2111        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2112    fi
2113    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2114        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2115        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2116    fi
2117    if [ -d "/lib/dev-state" ]; then 
2118        cp -a /lib/dev-state ./lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2119    fi
2120    cd "$old_pwd"
2121    echo -e "$DONE"
2122    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2123    MakeMountlist $MINDI_TMP/mountlist.txt
2124    CheckMountlist $MINDI_TMP/mountlist.txt
2125    mkdir -p $bigdir/tmp
2126    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2127    if [ _"$MONDO_SHARE" != _"" ]; then
2128        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2129    fi
2130    if [ $LVM != "false" ]; then
2131        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2132        if [ "$?" -ne "0" ]; then
2133            LVM="false"
2134            rm -f $bigdir/tmp/i-want-my-lvm
2135        else
2136            LogFile "Your i-want-my-lvm file content is:"
2137            LogFile "-----------------------------------"
2138            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2139            LogFile "-----------------------------------"
2140        fi
2141    fi
2142    LogFile "Your mountlist.txt file content is:"
2143    LogFile "-----------------------------------"
2144    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2145    LogFile "-----------------------------------"
2146
2147    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2148    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2149    if [ _"$MONDO_SHARE" != _"" ]; then
2150        for q in filelist.full.gz biggielist.txt ; do
2151            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2152            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2153        done
2154    fi
2155
2156    # copy (e)lilo/isolinux/grub/whatever stuff into it as well
2157    # to get it on the media (in addition to the boot part
2158    # and also to support UEFI boot mechanism
2159    bootdir=$bigdir/syslinux
2160    bootconf="$bootdir/syslinux.cfg"
2161    boottype=syslinux
2162    mkdir -p $bootdir
2163    if [ "$BOOT_TYPE" != "BIOS" ]; then
2164        if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
2165            LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
2166            MindiExit -1
2167        fi
2168        # EFI or UEFI
2169        # TODO: names are hard-coded for now
2170        if [ "$BOOT_TYPE" = "UEFI" ]; then
2171            # UEFI
2172            efidir=$bigdir/EFI/BOOT
2173            # On RHEL6 grub works
2174            dname=`pbdistrocheck | grep -E '^Name:' | cut -d':' -f2`
2175            dver=`pbdistrocheck | grep -E '^Ver:' | cut -d':' -f2`
2176            if [ $dname = "rhel" ] && [ $dver = "6" ]; then
2177                bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2178                bootconf="$efidir/grub.conf"
2179                boottype=grub
2180            elif [ $dname = "rhel" ] && [ $dver = "7" ]; then
2181                bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2182                bootconf="$efidir/grub.conf"
2183                boottype=grub2
2184            else
2185                # Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
2186                FindSyslinux64EFI
2187                bootbin=$SYSLINUX64EFI
2188                bootconf="$efidir/syslinux.cfg"
2189            fi
2190        else
2191            # EFI
2192            efidir=$bootdir
2193            bootbin=`find /boot/efi -iname "elilo.efi" | head -1`
2194            boottype=elilo
2195            bootconf="$efidir/elilo.conf"
2196        fi
2197        LogAll "Found $boottype boot type"
2198
2199        # Copy it so that CD-ROM menu entry is satisfied
2200        mountefi=0
2201        df -T | grep /boot/efi | grep -qE 'vfat'
2202        if [ $? -ne 0 ]; then
2203            mount /boot/efi
2204            if [ $? -ne 0 ]; then
2205                echo "You have to mount your (U)EFI partition when using mindi"
2206                MindiExit -1
2207            fi
2208            mountefi=1
2209        fi
2210        mkdir -p $efidir
2211        cp $bootbin $efidir
2212        if [ $mountefi -eq 1 ]; then
2213            umount /boot/efi 2>&1 > /dev/null
2214        fi
2215
2216        if [ $boottype = "syslinux" ]; then
2217            FindLdlinuxe64Binary
2218            if [ -e "$LDLINUXE64" ]; then
2219                LogFile "INFO: Copying $LDLINUXE64 to $efidir"
2220                cp $LDLINUXE64 $efidir 2>> $LOGFILE || Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
2221            fi
2222        fi
2223    else   
2224        # Useful for syslinux 5.x
2225        FindLdlinux32Binary
2226        if [ -e "$LDLINUXC32" ]; then
2227            LogFile "INFO: Copying $LDLINUXC32 to $bootdir"
2228            cp $LDLINUXC32 $bootdir 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $bootdir). Did you run out of disk space?"
2229        fi
2230    fi
2231
2232    MakeBootConfFile $boottype > $bootconf
2233
2234    echo -en "Tarring and zipping the data content..."
2235    size_of_all_tools=`du -sk $bigdir | cut -f1`
2236    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $MINDI_CACHE/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2237    LogFile "Size of the data content"
2238    LogFile "------------------------"
2239    du -sk $MINDI_CACHE/*gz >> $LOGFILE
2240    LogFile "------------------------"
2241    echo -e "$DONE"
2242
2243    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2244    rm -rf $bigdir
2245    rm -f $needlist
2246}
2247
2248
2249Prompt() {
2250    echo -en "$1"
2251    read line
2252}
2253
2254
2255ReadLine() {
2256    local i incoming
2257    read incoming
2258    i=0
2259    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2260        i=$(($i+1))
2261        read incoming
2262    done
2263    echo "$incoming"
2264}
2265
2266
2267SizeOfPartition() {
2268    local devpath drive res stub
2269    device=$1
2270    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2271        Die "Cannot find $device's size - is your /etc/fstab sane?"
2272    fi
2273    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2274        res=`SizeOfRaidPartition $device`
2275        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2276        echo "$res"
2277        return 0
2278    fi
2279    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2280    res=`$FDISK -s $device 2>> $LOGFILE`
2281    # end patch
2282    # take only the first in case of multiple mount (cifs, nfs, ...)
2283    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2284    [ "$res" = "" ] && res="-1"
2285    echo $res
2286    return 0
2287}
2288
2289
2290SizeOfRaidPartition() {
2291    local real_dev smallest_size silly tmp
2292
2293    silly=999999999
2294    smallest_size=$silly
2295
2296    for real_dev in `GetRaidDevMembers $1` ; do
2297        tmp=`SizeOfPartition $real_dev`
2298        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2299    done
2300
2301    if [ "$smallest_size" = "$silly" ] ; then
2302        echo "-1"
2303        return 1
2304    else
2305        echo "$smallest_size"
2306        return 0
2307    fi
2308}
2309
2310
2311StripExecutable()
2312{
2313    local tmpfile
2314
2315    tmpfile=$MINDI_TMP/stripped.$$.dat
2316    [ -d "$1" ] || [ -h "$1" ] && return
2317    cp -f $1 $tmpfile 2>> $LOGFILE
2318    strip $tmpfile 2> /dev/null
2319    if [ "$?" -eq "0" ] ; then
2320        cp -f $tmpfile $1 2>> $LOGFILE
2321        LogFile "INFO: Stripped binary $2"
2322    fi
2323    rm -f $tmpfile
2324}
2325
2326KernelVer() {
2327        local fkern_ver fname
2328
2329        fname=$1
2330        file $fname | grep -q gzip
2331        if [ "$?" -eq "0" ] ; then
2332            # Used by ia64
2333            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2334        else
2335            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2336        fi
2337        echo "$fkern_ver"
2338}
2339
2340
2341# WARNING: This function should just echo the final result !!!
2342#
2343TryToFindKernelPath() {
2344    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2345
2346    we_want_version=$KERVERRUN
2347    possible_kernels=""
2348    duff_kernels=""
2349    output=""
2350
2351    if [ "$ARCH" = "ia64" ] ; then
2352       root="/boot/efi/efi"
2353    else
2354       root="/"
2355    fi
2356    # See if we're booted from a Xen kernel
2357    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2358    if [ -f /proc/xen/capabilities ]; then
2359        # It's a Xen kernel
2360        KERNEL_IS_XEN="yes"
2361        LogFile "INFO: It's a Xen kernel..."
2362    fi
2363
2364    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2365        [ ! -e "$fname" ] && continue
2366        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2367        fkern_ver=`KernelVer $fname`
2368        [ "$fkern_ver" = "" ] && continue
2369        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2370        [ -f "$fname" ] || continue
2371        [ -h "$fname" ] && continue
2372        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2373        file $fname | grep -q gzip
2374        if [ "$?" -eq "0" ] ; then
2375            # Used by ia64
2376            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2377                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2378                duff_kernels="$fname $duff_kernels"
2379            else
2380                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2381                possible_kernels="$fname $possible_kernels"
2382            fi
2383        else
2384            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2385                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2386                duff_kernels="$fname $duff_kernels"
2387            else
2388                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2389                possible_kernels="$fname $possible_kernels"
2390            fi
2391        fi
2392    done
2393    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2394        possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2395    fi
2396    if [ ! "$possible_kernels" ] ; then
2397        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2398        possible_kernels="$duff_kernels"
2399        if [ ! "$possible_kernels" ] ; then
2400            LogAll "INFO: Sorry, no duff kernels either"
2401        else
2402            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2403            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2404        fi
2405    fi
2406    if [ $KERNEL_IS_XEN = "yes" ]; then
2407        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2408        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2409    fi
2410    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2411    noof_kernels=`CountItemsIn "$possible_kernels"`
2412    if [ "$noof_kernels" -eq "0" ] ; then
2413        LogAll "Could not find your kernel."
2414        if [ -e "/boot/vmlinuz" ] ; then
2415            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2416            output=/boot/vmlinuz
2417        else
2418            output=""
2419        fi
2420    elif [ "$noof_kernels" -eq "1" ] ; then
2421        kp=`echo "$possible_kernels" | sed s/' '//`
2422        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2423        output="$kp"
2424    else
2425        for i in $possible_kernels ; do
2426            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2427                LogAll "INFO: OK, I used my initiative and found that "
2428                LogAll "INFO: $i is probably your kernel. "
2429                output="$i"
2430                break
2431            fi
2432        done
2433        if [ ! -n "$output" ]; then
2434            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2435                output=/boot/vmlinuz
2436                LogFile "INFO: Schlomo, this one's for you."
2437            else
2438                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2439                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2440                LogFile "INFO: $possible_kernels"
2441                output=""
2442            fi
2443        fi
2444    fi
2445    if [ $KERNEL_IS_XEN = "yes" ]; then
2446        if [ "$noof_xenkernels" -eq "0" ]; then
2447            xenkernelpath=""
2448        elif [ "$noof_xenkernels" -eq "1" ]; then
2449            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2450            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2451        else
2452            for i in $possible_xenkernels ; do
2453                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2454                    LogFile "INFO: OK, I used my initiative and found that "
2455                    LogFile "INFO: $i is probably your Xen kernel. "
2456                    xenkernelpath="$i"
2457                    break
2458                fi
2459            done
2460            if [ ! -n "$xenkernelpath" ]; then
2461                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2462                if [ ! -n "$new_possible_xenkernels" ]; then
2463                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2464                    LogFile "INFO: Using $xenkernelpath"
2465                else
2466                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2467                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2468                    LogFile "INFO: $possible_xenkernels"
2469                    output=""
2470                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2471                    LogFile "INFO: Using $xenkernelpath"
2472                fi
2473            fi
2474        fi
2475        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2476            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2477        fi
2478    fi
2479    #LogAll "TryToFindKernelPath found $output"
2480    echo "$output"
2481}
2482
2483
2484TurnTgzIntoRdz() {
2485    local tgz_dir_fname rdz_fname tempfile old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path d thelink templog
2486
2487    tgz_dir_fname=$1
2488    rdz_fname=$2
2489    kernelsize=$3
2490    maxsize=$(($BOOT_SIZE-$kernelsize))
2491    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2492    tempfile=$MINDI_TMP/temp.rd
2493    res=0 
2494    templog=$MINDI_TMP/$$.log
2495    > $templog
2496
2497    echo -en "..."
2498    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2499    echo -en "..."
2500    LogFile "INFO: Creating ext2 filesystem on $tempfile"
2501    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2502    echo -en "..."
2503    mkdir -p $mountpoint
2504    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2505    echo -en "..."
2506    old_pwd=`pwd`
2507    cd "$mountpoint"
2508
2509    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2510    for d in bin sbin lib lib64; do
2511        if [ -h "/$d" ]; then
2512            thelink=`readlink /$d`
2513            mkdir -p $mountpoint/$thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2514            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2515            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2516                rmdir $mountpoint/$d
2517            fi
2518            if [ ! -h $mountpoint/$d ]; then
2519                rm -f $mountpoint/$d 2> /dev/null
2520                (cd $mountpoint ; ln -s $thelink $d) || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2521            fi
2522        fi
2523    done
2524
2525    LogFile "INFO: what is now in $mountpoint"
2526    ls -alR $mountpoint >> $LOGFILE
2527   
2528    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2529    # copy from rootfs into mountpoint
2530    for f in $tgz_dir_fname/*; do 
2531        if [ ! -r $f ]; then
2532            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2533        else
2534            cp -af $f . 2>&1 >> $LOGFILE
2535        fi
2536    done
2537    (cd etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2538    ln -sf usr/sbin/init linuxrc
2539
2540    cd dev || Die "Can't cd to dev"
2541    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2542    rm -f dev-entries.tgz
2543    cd ..
2544
2545    for w in insmod.static insmod.static.old ; do
2546        s=`which $w 2> /dev/null`
2547        if [ -e "$s" ] ; then
2548            tar cf - -C / $s 2> /dev/null | tar xf -
2549        fi
2550    done
2551
2552    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2553   
2554    # Copy of files mandatory for ssh to automate mount if sshfs is used
2555    mkdir -p $mountpoint/.ssh $mountpoint/tmp
2556    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2557    cat > $mountpoint/tmp/myssh << EOF
2558ssh -o StrictHostKeyChecking=no $*
2559EOF
2560    chmod 755 $mountpoint/tmp/myssh
2561
2562    # Copy of files mandatory for ld.so
2563    cp -a /etc/ld.so.c* $mountpoint/etc
2564
2565    # Handle the case where busybox and mount are dynamically linked
2566    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2567    if [ $? -eq 0 ]; then
2568        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2569        rm -f bin/mount
2570    fi
2571
2572    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf & udev.conf file (which includes all busybox deps)
2573    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2574    for f in `cat $DEPLIST_DIR/minimal.conf $DEPLIST_DIR/udev.conf | grep -vE " *#.*|^#" | sort -u` ; do
2575        if [ -d $f ]; then
2576            for g in `find $f`; do 
2577                echo $g >> $MINDI_TMP/minimal.lis
2578                LocateDeps $g  >> $MINDI_TMP/minimal2.lis
2579            done
2580        else 
2581            if [ -r $f ]; then
2582                echo $f >> $MINDI_TMP/minimal.lis
2583                LocateDeps $f >> $MINDI_TMP/minimal2.lis
2584            fi
2585        fi
2586    done
2587    LogAll "Processing all dependencies of required files..."
2588    for f in `sort -u $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis`; do
2589        mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2590    done
2591    # Initial / are trucated by tar
2592    finallist=""
2593    # Remove directories from the list, as tar/cp will create them anyway
2594    # and it may hurt if /lib is in it as on Debian/Ubuntu
2595    # recent bash says that -d is true for a link to a dir !
2596    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2597        if [ -e "$f" -a ! -d "$f" ] || [ -h $f ]; then
2598            # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2599            if [ ! -e "$mountpoint/$f" ]; then
2600                finallist="$finallist $f"
2601            fi
2602        fi
2603    done
2604    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2605
2606    fnllist=`echo $finallist | sort -u`
2607    #tar cf - $finallist 2> $templog | tar xf - || LogIt "WARNING: Problem in minimal analysis" $templog
2608    echo "INFO: Copy the minimal env with cp -a --parents $finallist -t $mountpoint" 2>&1 >> $templog
2609    cp -a --parents $fnllist -t $mountpoint 2> $templog || LogIt "WARNING: Problem in minimal analysis" $templog
2610
2611    # In case target /bin dir still doesn't exist, create it before using it
2612    if [ ! -d $mountpoint/bin ]; then
2613        mkdir -p $mountpoint/bin
2614    fi
2615
2616    # For older distributions expecting /sbin/init provides it
2617    if [ ! -e "sbin/init" ]; then
2618        (cd sbin ; ln -sf ../usr/sbin/init .)
2619    fi
2620
2621    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2622    ln -sf /bin/bash bin/sh
2623    LogFile "INFO: Using bash as default shell"
2624
2625    # Avoids an issue on some distro (RHEL5)
2626    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2627
2628    mkdir -p $mountpoint/tmp
2629    # Management of udev (which includes modprobe in rules)
2630    ps auxww | grep -v grep | grep -qw udevd
2631    if [ $? -eq 0 ]; then
2632        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2633        LogFile "INFO: udev device manager found"
2634        tar cf - -C / /etc/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /etc/udev analysis" $templog
2635        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2636        rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2637        # Do not do it if it's a link (Ubuntu 64 bits #503)
2638        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2639            tar cf - -C / /lib64/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /lib64/udev analysis" $templog
2640        fi
2641        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2642            tar cf - -C / /lib32/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /lib32/udev analysis" $templog
2643        fi
2644        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2645            tar cf - -C / /lib/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /lib/udev analysis" $templog
2646        fi
2647        if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [  ! -h "/usr/lib/udev" ]; then
2648            tar cf - -C / /usr/lib/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /usr/lib/udev analysis" $templog
2649        fi
2650        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ] || [ -x /lib/systemd/systemd-udevd ]; then
2651            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2652            lis=""
2653            # Get only the files which exist in that list
2654            # and potentially their symlink structure
2655            for i in $lis2; do
2656                if [ -h $i ]; then
2657                    j=$i
2658                    while [ -h $j ]; do
2659                        lis="$lis $j"
2660                        j=`readlink -f $j`
2661                    done
2662                    lis="$lis $j"
2663                elif [ -f $i ]; then
2664                    lis="$lis $i"
2665                fi
2666            done
2667            # And their deps
2668            LocateDeps $lis > $MINDI_TMP/udev.lis
2669            for i in $lis; do
2670                if [ "`echo $i | cut -c1`" = "/" ]; then
2671                    j=`echo $i | cut -c2-`
2672                    [ "$j" != "" ] && rm -f $j
2673                fi
2674                echo "$i" >> $MINDI_TMP/udev.lis
2675            done
2676            finallist=""
2677            # Remove directories from the list, as tar/cp will create them anyway
2678            # and it may hurt if /lib is in it as on Debian/Ubuntu
2679            # recent bash says that -d is true for a link to a dir !
2680            for f in `sort -u $MINDI_TMP/udev.lis`; do
2681                if [ -e "$f" -a ! -d "$f" ] || [ -h "$f" ]; then
2682                    # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2683                    if [ ! -e "$mountpoint/$f" ]; then
2684                        finallist="$finallist $f"
2685                    fi
2686                fi
2687            done
2688            #tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $templog
2689            echo "INFO: Copying udev related files with cp -a --parents $finallist -t $mountpoint/" 2>&1 >> $templog
2690            cp -a --parents $finallist -t $mountpoint/ 2> $templog  || LogIt "ERROR: Problem in udev.lis analysis" $templog
2691            rm -f $MINDI_TMP/udev.lis
2692        else
2693            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2694            LogAll "         mindi will use static devices which may cause problems"
2695            rm -f $mountpoint/tmp/USE-UDEV
2696        fi
2697    fi
2698
2699    # Management of potential HW info (ProLiant only at the moment)
2700    rm -rf $MINDI_CACHE/bkphw
2701    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2702    if [ -d $MINDI_CACHE/bkphw ]; then
2703        LogIt "INFO: Hardware Information found and saved ..."
2704        cp -rp $MINDI_CACHE/bkphw .
2705        if [ -f $MINDI_CACHE/tools.files ]; then
2706            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2707            LocateDeps $lis > $MINDI_TMP/tools.lis
2708            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $templog
2709        fi
2710        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2711            mv -f $MINDI_CACHE/mindi-rsthw .
2712            chmod 755 ./mindi-rsthw
2713        fi
2714        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2715    fi
2716
2717    # Management of perl scripts delivered needed at restore time
2718    LogAll "Analyzing perl modules dependencies..."
2719    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]*bin/mr-* 2> $templog > $MINDI_TMP/perl.lis || LogIt "ERROR: Problem in mindi-get-perl-modules" $templog
2720    LogFile "DBG4: Perl Modules found:"
2721    LogFile "-------------------------"
2722    cat $MINDI_TMP/perl.lis >> $LOGFILE
2723    LogFile "-------------------------"
2724    tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $templog
2725
2726    for w in cdrom groovy-stuff ; do
2727        mkdir -p mnt/$w
2728    done
2729
2730    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2> $templog | tar xf -  || LogIt "ERROR: Problem in fd dev analysis" $templog
2731
2732    echo -en "..."
2733    cd /
2734
2735    needed_modules=""
2736    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2737
2738    if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2739        # For PXE boot
2740        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2741    fi
2742    for i in $DENY_MODS; do
2743        LogFile "INFO: Removing $i from the list of modules to load"
2744        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2745    done
2746
2747    if [ "${kernelname}" != "" ]; then
2748        needed_modules_path=lib/modules/${kernelname}
2749        mkgmopt="-k ${kernelname}"
2750    else
2751        needed_modules_path=lib/modules/$KERVERRUN
2752        mkgmopt="-k $KERVERRUN"
2753    fi
2754
2755    [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n         If you're not using a modular kernel then mindi won't probably work."
2756    LogAll "Analyzing kernel modules dependencies..."
2757    needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2758
2759    LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2760    cp --parents -aL $needed_modules $mountpoint/ 2> $templog || LogIt "ERROR: Unable to copy modules to $mountpoint" $templog
2761
2762    # Uncompress modules if not using udev and native modprobe
2763    if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2764        for i in $needed_modules; do
2765            if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2766                gunzip -f $mountpoint/$i
2767            fi
2768            if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2769                bunzip2 -f $mountpoint/$i
2770            fi
2771            if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2772                unxz -f $mountpoint/$i
2773            fi
2774            LogFile "INFO: Uncompressing $i"
2775        done
2776    fi
2777
2778    # Also copy modules.* in case of udev so that normal modprobe works
2779    tar cf - -C / /$needed_modules_path/modules.* 2> $templog | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $templog
2780
2781    # Copy FW in case some drivers needs it
2782    for d in "/lib" "/usr/lib"; do
2783        if [ -d "$d/firmware" -a ! -h $d ]; then
2784            cp -a "$d/firmware" "$mountpoint/$d"
2785        fi
2786    done
2787
2788    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2789    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2790        if [ -d "$d/multipath" -a ! -h $d ]; then
2791            cp -a "$d/multipath" "$mountpoint/$d"
2792        fi
2793    done
2794
2795    # Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
2796    (cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e "$mountpoint/bin/$i" ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done)
2797
2798    # Copy an additional ProLiant tool for OBDR support
2799    if [ -f $MINDI_TMP/OBDR ]; then
2800        found=0
2801        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2802            mkdir -p $mountpoint/usr/bin
2803            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2804            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2805            found=1
2806        fi
2807        if [ -x /usr/bin/sg_wr_mode ]; then
2808            mkdir -p $mountpoint/usr/bin
2809            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2810            LocateDeps $lis > $MINDI_TMP/obdr.lis
2811            (cd $mountpoint ; tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $templog)
2812            LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2813            found=1
2814        fi
2815        if [ $found -eq 0 ]; then
2816            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2817            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2818        fi
2819    fi
2820
2821    if [ ! -e "/sbin/devfsd" ]; then
2822        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2823        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2824        rm -f $mountpoint/sbin/devfsd
2825    fi
2826    cd "$old_pwd"
2827    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2828    if [ _"$MONDO_SHARE" != _"" ]; then
2829        MakeMondoConfigFile $mountpoint/tmp/$MRCFG
2830        cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk"
2831        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2832        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2833        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2834    fi
2835
2836    # Create module list to load at restore time
2837    rm -f $mountpoint/tmp/modules
2838    for m in $CDROM_MODS; do
2839        echo $m >> $mountpoint/tmp/modules
2840    done
2841
2842    # copy boot stuff now generated in PrepareDataDiskImage
2843    if [ "$BOOT_TYPE" = "UEFI" ]; then
2844        (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
2845    else
2846        (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
2847    fi
2848
2849    mkdir -p $mountpoint/proc
2850    LogFile "---------------------------"
2851    LogFile "Size of initial ramdisk:"
2852    LogFile "---------------------------"
2853    (cd "$mountpoint" ; du -sh .) >> $LOGFILE
2854    LogFile "---------------------------"
2855    LogFile "Content of initial ramdisk:"
2856    LogFile "---------------------------"
2857    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2858    LogFile "---------------------------"
2859
2860    # Determine what filesystem to use for initrd image
2861    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2862    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2863    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2864    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2865        # say what will be used
2866        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2867        # kernel expects linuxrc in ext2 filesystem
2868        ( cd "$mountpoint" && ln -sf usr/sbin/init linuxrc )
2869        # unmount loop filesystem and create image file using the standard approach
2870        umount $mountpoint || Die "Cannot unmount $tempfile"
2871        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2872        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2873            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2874        else
2875            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2876        fi
2877        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2878        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2879        rm -f ${rdz_fname}.tmp
2880        # log that we are done
2881        LogFile "      ...done."
2882    elif [ "$gvFileSystem" = "initramfs" ]; then
2883        # say what will be used
2884        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2885        # make sure that cpio is there
2886        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2887        # go into filesystem
2888        cd "$mountpoint"
2889        # kernel expects init in cpio filesystem
2890        ln -sf usr/sbin/init init
2891        # create cpio image file and unmount loop filesystem
2892        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2893        cd "$old_pwd"
2894        umount $mountpoint || Die "Cannot unmount $tempfile"
2895        # log that we are done
2896        LogFile "      ...done."
2897    else
2898        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2899    fi
2900
2901    if [ "$res" -eq "0" ] ; then
2902        echo -en "..."
2903    else
2904        echo -en "\rMade an rdz WITH ERRORS.           \n"
2905    fi
2906    return 0
2907}
2908
2909
2910##############################################################################
2911#----------------------------------- Main -----------------------------------#
2912##############################################################################
2913
2914# Now we can create what we need
2915mkdir -p $MINDI_TMP
2916
2917# --nolog needs to be first, and is used in analyze-my-lvm
2918if [ "$1" = "--nolog" ] ; then
2919    shift
2920    LOGFILE=/dev/stderr
2921else
2922    > $LOGFILE
2923fi
2924if [ "$1" = "--printvar" ] ; then
2925    shift
2926    if [ _"$1" != _"" ] ; then
2927        set | grep -Ew "^$1" | cut -d= -f2
2928    fi
2929    exit 0
2930fi
2931
2932LogFile "mindi v$MINDI_VERSION"
2933LogFile "-----------------------------"
2934LogFile "Start date : `date`"
2935LogFile "-----------------------------"
2936LogFile "$ARCH architecture detected"
2937LogFile "mindi called with the following arguments:"
2938echo "$@">> $LOGFILE
2939LogFile "-----------------------------"
2940LogFile "pbdistrocheck results:"
2941pbdistrocheck >> $LOGFILE
2942LogFile "-----------------------------"
2943
2944[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2945
2946# Log some capital variables
2947[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2948[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2949LogFile "MONDO_SHARE = $MONDO_SHARE"
2950LogFile "MINDI_LIB = $MINDI_LIB"
2951LogFile "MINDI_SBIN = $MINDI_SBIN"
2952LogFile "MINDI_CONF = $MINDI_CONF"
2953# Purge from potential old run
2954if [ _"$MINDI_CACHE" = _"" ]; then
2955    Die "MINDI_CACHE undefined"
2956else
2957    LogFile "MINDI_CACHE = $MINDI_CACHE"
2958fi
2959
2960if [ -f $MINDI_CONFIG ]; then
2961    LogFile "-----------------------------"
2962    LogFile " Mindi configuration file    "
2963    LogFile "-----------------------------"
2964    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2965    LogFile "-----------------------------"
2966fi
2967LogFile "In Mindi"
2968LogFile "--------"
2969LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2970LogFile "BOOT_SIZE = $BOOT_SIZE"
2971LogFile "--------"
2972
2973trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2974
2975# Sanity checks
2976which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2977which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2978which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2979which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2980if which awk &> /dev/null ; then
2981    if ! which gawk &> /dev/null ; then
2982        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2983    fi
2984fi
2985which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2986[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2987
2988[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2989
2990# Update the PATH variable if incomplete
2991if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2992    PATH=$PATH:/sbin:/usr/sbin
2993    export PATH
2994    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2995    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2996    LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
2997fi
2998
2999if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
3000    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
3001fi
3002
3003### TODO
3004### Fix as it's not mandatory on ia64
3005if [ "$ARCH" = "ia64" ] ; then
3006    if which elilo &> /dev/null ; then
3007        LILO_EXE=elilo
3008    else
3009        LILO_EXE=`which false 2> /dev/null`
3010    fi
3011else
3012    FindIsolinuxBinary
3013fi
3014trap "Aborted" SIGTERM
3015DONE="\r\t\t\t\t\t\t\t\tDone.         "
3016kernelpath=""
3017MONDO_ROOT=/var/cache/mondo
3018mkdir -p $MONDO_ROOT
3019
3020if [ -d "/proc/lvm" ]; then
3021    # LVM v1
3022    LVMCMD=""
3023    LVM="v1"
3024elif [ -d "/dev/mapper" ]; then
3025    # LVM v2
3026    LVMCMD="lvm"
3027    LVM="v2"
3028else
3029    LVM="false"
3030fi
3031
3032if [ -e "/proc/cmdline" ]; then
3033    CMDLINE="/proc/cmdline"
3034elif [ -e "/tmp/cmdline" ]; then
3035    CMDLINE="/tmp/cmdline"
3036else
3037    CMDLINE="/dev/null"
3038fi
3039
3040LogFile "INFO: LVM set to $LVM"
3041LogFile "----------"
3042LogFile "mount result:"
3043LogFile "-------------"
3044mount >> $LOGFILE
3045if [ -e "/etc/raidtab" ]; then
3046    LogFile "-------------"
3047    LogFile "/etc/raidtab content:"
3048    LogFile "-------------"
3049    cat /etc/raidtab >> $LOGFILE
3050else
3051    LogFile "No file /etc/raidtab"
3052fi
3053if [ -e "/etc/mdadm.conf" ]; then
3054    LogFile "-------------"
3055    LogFile "/etc/mdadm.conf content:"
3056    LogFile "-------------"
3057    cat /etc/mdadm.conf >> $LOGFILE
3058else
3059    LogFile "-------------"
3060    LogFile "No file /etc/mdadm.conf"
3061fi
3062LogFile "-------------"
3063LogFile "cat $CMDLINE"
3064LogFile "-------------"
3065cat $CMDLINE >> $LOGFILE
3066LogFile "-------------"
3067LogFile "cat /proc/swaps:"
3068LogFile "-------------"
3069cat /proc/swaps >> $LOGFILE
3070LogFile "-------------"
3071if [ -e "/proc/mdstat" ]; then
3072    LogFile "cat /proc/mdstat:"
3073    LogFile "-------------"
3074    cat /proc/mdstat >> $LOGFILE
3075else
3076    LogFile "No pseudo file /proc/mdstat"
3077fi
3078LogFile "-------------"
3079LogFile "cat /proc/partitions:"
3080LogFile "-------------"
3081cat /proc/partitions >> $LOGFILE
3082LogFile "-------------"
3083LogFile "cat /proc/filesystems:"
3084LogFile "-------------"
3085cat /proc/filesystems >> $LOGFILE
3086LogFile "-------------"
3087LogFile "lsmod result:"
3088LogFile "-------------"
3089lsmod >> $LOGFILE
3090MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3091if [ -x /usr/sbin/esxcfg-module ]; then
3092    LogFile "-------------"
3093    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3094    LogFile "-------------"
3095    LogFile "VMWare modules"
3096    LogFile "-------------"
3097    /usr/sbin/esxcfg-module -l >> $LOGFILE
3098    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3099fi
3100LogFile "-------------" 
3101LogFile "FORCE_MODS:"
3102LogFile "-------------"
3103LogFile "$FORCE_MODS"
3104LogFile "-------------"
3105LogFile "DENY_MODS:"
3106LogFile "-------------"
3107LogFile "$DENY_MODS"
3108LogFile "-------------"
3109LogFile "df result:"
3110LogFile "----------"
3111df -aT >> $LOGFILE
3112LogFile "-------------"
3113LogFile "df -i result:"
3114LogFile "----------"
3115df -i >> $LOGFILE
3116LogFile "-------------"
3117if [ -r /boot/grub/menu.lst ]; then
3118    LogFile "-------------"
3119    LogFile "INFO: /boot/grub/menu.lst content"
3120    LogFile "-------------"
3121    cat /boot/grub/menu.lst >> $LOGFILE
3122    LogFile "-------------"
3123fi
3124if [ -r /boot/grub/grub.conf ]; then
3125    LogFile "-------------"
3126    LogFile "INFO: /boot/grub/grub.conf content"
3127    LogFile "-------------"
3128    cat /boot/grub/grub.conf >> $LOGFILE
3129    LogFile "-------------"
3130fi
3131if [ -r /boot/grub/grub.cfg ]; then
3132    LogFile "-------------"
3133    LogFile "INFO: /boot/grub/grub.cfg content"
3134    LogFile "-------------"
3135    cat /boot/grub/grub.cfg >> $LOGFILE
3136    LogFile "-------------"
3137fi
3138if [ -r /boot/grub/device.map ]; then
3139    LogFile "-------------"
3140    LogFile "INFO: /boot/grub/device.map content"
3141    LogFile "-------------"
3142    cat /boot/grub/device.map >> $LOGFILE
3143    LogFile "-------------"
3144fi
3145if [ -r /etc/lilo.conf ]; then
3146    LogFile "-------------"
3147    LogFile "INFO: /etc/lilo.conf content"
3148    LogFile "-------------"
3149    cat /etc/lilo.conf >> $LOGFILE
3150fi
3151if [ -d /boot/efi ]; then
3152    gcf=`find /boot/efi -name 'grub.c*'`
3153    if [ _"$gcf" = _"" ]; then
3154        LogFile "Found a /boot/efi directory without a grub config file in it"
3155    else
3156        LogFile "-------------"
3157        LogFile "INFO: $gcf content"
3158        LogFile "-------------"
3159        cat $gcf >> $LOGFILE
3160        LogFile "-------------"
3161    fi
3162fi
3163
3164LogFile "Full fdisk info"
3165LogFile "---------------"
3166$FDISK -l >> $LOGFILE
3167LogFile "----------------"
3168
3169# Compute libata version
3170laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3171# If libata v2 is used then remove ide-generic as it will perturbate boot
3172if [ "`echo $MODULES | grep libata`" ]; then
3173    if [ "$laver" = "2" ]; then
3174        DENY_MODS="$DENY_MODS ide-generic"
3175        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3176        LogFile "-------------"
3177    fi
3178fi
3179
3180# Check for McAfee which disturbs the access to some files (tgz in articular)
3181if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3182    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3183    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3184    LogFile "WARNING: You have two options:"
3185    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3186    LogFile "WARNING:  - Disable the scanner during the backup"
3187fi
3188
3189FLOPPY_WAS_MOUNTED=""
3190for mtpt in /media/floppy /mnt/floppy /floppy ; do
3191    if mount | grep -w $mtpt &> /dev/null ; then
3192        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3193        umount $mtpt
3194    fi
3195done
3196
3197#
3198# If we have a USB device we need to store info
3199# and remove it from the parameters line
3200#
3201if [ "$#" -ne "0" ] ; then
3202    if [ "$1" = "--usb" ] ; then
3203        shift
3204        USBDEVICE=$1
3205        if [ _"$USBDEVICE" = _"" ]; then
3206            Die "No USB device specified"
3207        fi
3208        shift
3209    fi
3210fi
3211
3212if [ "$#" -ne "0" ] ; then
3213    if [ "$1" = "--findkernel" ] ; then
3214        resk=`TryToFindKernelPath`
3215        # Avoids logfile content for mondo
3216        export MONDO_SHARE=""
3217        if [ "$resk" = "" ] ; then
3218            if [ $KERNEL_IS_XEN = "yes" ]; then
3219                echo "$xenkernelpath"
3220                LogFile "INFO: xenkernelpath = $xenkernelpath"
3221                MindiExit 0
3222            else
3223                MindiExit -1
3224            fi
3225        else
3226            echo "$resk"
3227            LogFile "INFO: kernelpath = $resk"
3228            MindiExit 0
3229        fi
3230    elif [ "$1" = "--locatedeps" ] ; then
3231        [ ! "$2" ] && Die "Please specify the binary to look at"
3232        LocateDeps $*
3233        # Avoids logfile content for mondo
3234        export MONDO_SHARE=""
3235        MindiExit $?
3236    elif [ "$1" = "--readalllink" ] ; then
3237        [ ! "$2" ] && Die "Please specify the binary to look at"
3238        # Avoids logfile content for mondo
3239        export MONDO_SHARE=""
3240        mr-read-all-link $2
3241        MindiExit $?
3242    elif [ "$1" = "--makemessage" ] ; then
3243        MakeMessageFile | cut -c1-80
3244        MindiExit 0
3245    elif [ "$1" = "--makemountlist" ] ; then
3246        [ ! "$2" ] && Die "Please specify the output file"
3247        MakeMountlist $2
3248        CheckMountlist $2
3249        # Avoids logfile content for mondo
3250        export MONDO_SHARE=""
3251        MindiExit $?
3252    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3253        echo "Mindi v$MINDI_VERSION"
3254        # Avoids logfile content for mondo
3255        export MONDO_SHARE=""
3256        MindiExit 0
3257    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3258        MONDO_TMP=$2
3259        # Change MINDI_TMP for the one provided by mondo
3260        # So that it can get back the built files
3261        if [ _"$MONDO_TMP" = _"" ]; then
3262            Die "MONDO_TMP is empty, aborting"
3263        fi
3264        if [ _"$MONDO_TMP" = _"/" ]; then
3265            Die "MONDO_TMP is /, aborting"
3266        fi
3267        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3268        rmdir $MINDI_TMP
3269        export MINDI_TMP=$MONDO_TMP
3270        mkdir -p $MINDI_TMP
3271
3272        # This is the scratch dir in mondo - subdir images
3273        MINDI_CACHE=$3
3274        LogFile "MINDI_CACHE = $MINDI_CACHE"
3275
3276        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3277        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3278       
3279###
3280### Sq-Modification...
3281### Attempt to locate kernel specific module path
3282### if module path is found then use it other wise use uname -r to set it...
3283###
3284        if [ $KERNEL_IS_XEN = "yes" ]; then
3285            LogAll "INFO: xenkernelpath = $xenkernelpath"
3286        fi
3287        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3288        if [ ! -d "/lib/modules/$kernelname" ]; then
3289           LogAll "WARNING: Module path for ${kernelpath} not found..."
3290           LogAll "         using running kernel\'s modules."
3291           kernelname=$KERVERRUN
3292        else
3293           LogAll "INFO: Using modules for kernel: ${kernelname}"
3294        fi
3295        LogAll "INFO: kernelname = $kernelname"
3296        LogAll "INFO: kernelpath = $kernelpath"
3297###
3298### end of Sq-Modification
3299###
3300        TAPEDEV=$5
3301        TAPESIZE=$6
3302        FILES_IN_FILELIST=$7
3303        USE_LZO=$8
3304        CDRECOVERY=$9
3305        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3306            IMAGE_DEVS=""
3307        else
3308            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3309        fi
3310        if [ "${11}" ] ; then
3311            LILO_OPTIONS=""
3312    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3313        fi
3314        LAST_FILELIST_NUMBER=${12}
3315        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3316        export MINDI_EXCLUDE_DEVS="${14}"
3317        USE_COMP="${15}"
3318        USE_LILO="${16}"
3319        USE_STAR="${17}"
3320        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3321        DIFFERENTIAL="${19}"
3322        USE_GZIP="${20}"
3323        USE_LZMA="${21}"
3324        NOT_BOOT="${22}"
3325        BOOT_TYPE="${23}"
3326        [ "$USE_COMP" = "" ] && USE_COMP=yes
3327        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3328        [ "$USE_LZMA" = "" ] && USE_LZMA=no
3329        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3330        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3331        # MONDO_ROOT is the real scratchdir
3332        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3333        if [ _"$MONDO_ROOT" != _"" ]; then
3334            mkdir -p $MONDO_ROOT
3335        else
3336            Die "MONDO_ROOT is undefined"
3337        fi
3338    else
3339        LogScreen "Syntax: mindi (--custom ....)"
3340        MindiExit -1
3341    fi
3342fi
3343
3344if [ _"$MINDI_CACHE" != _"" ]; then
3345    rm -rf $MINDI_CACHE/* 2> /dev/null
3346    mkdir -p $MINDI_CACHE
3347fi
3348
3349[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3350
3351if [ _"$MONDO_SHARE" = _"" ]; then
3352    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3353    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3354    LogIt "BusyBox sources are available from http://www.busybox.net"
3355    LogIt "------------------------------------------------------------------------------"
3356else
3357    LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
3358fi
3359if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3360    LogIt "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3361else
3362    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3363    MindiExit -1
3364fi
3365
3366for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3367    modinfo $i 2> /dev/null 1> /dev/null
3368    if [ $? -eq 0 ]; then
3369        modprobe $i 2>&1 > /dev/null
3370    fi
3371done
3372
3373LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3374LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3375LogFile "NOT_BOOT = '$NOT_BOOT'"
3376if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3377    LogIt "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
3378    MakeMondoConfigFile $MINDI_TMP/$MRCFG
3379    MakeMountlist $MINDI_TMP/mountlist.txt
3380    CheckMountlist $MINDI_TMP/mountlist.txt
3381    mkdir -p $MINDI_TMP/small-all/tmp
3382    cd "$MINDI_TMP/small-all"
3383    cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3384    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3385    sleep 2
3386    LogIt "Done. Exiting."
3387    MindiExit 0
3388fi
3389
3390if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3391    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3392fi
3393
3394if [ "$kernelpath" = "" ] ; then
3395    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3396    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3397    read ch
3398    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3399        USE_OWN_KERNEL="yes"
3400    else
3401        USE_OWN_KERNEL="no"
3402    fi
3403    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3404        kernelpath=`TryToFindKernelPath`
3405        if [ "$kernelpath" = "" ] ; then
3406            echo -n "Please enter kernel path : "
3407            read kernelpath
3408        fi
3409    fi
3410fi
3411
3412echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3413[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3414
3415mountpoint=$MINDI_TMP/mountpoint.$$
3416PrepareDataDiskImages
3417
3418export ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3419
3420LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3421PrepareBootDiskImage $kernelpath || Die "Failed to create boot disk image."
3422
3423[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3424...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3425
3426if [ _"$MONDO_SHARE" = _"" ]; then
3427    ListImagesForUser
3428    OfferToMakeBootableISO
3429    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3430        OfferToMakeBootableUSB
3431    fi
3432    LogAll "Finished."
3433elif [ "$TAPEDEV" ] ; then
3434    if [ "$ARCH" != "ia64" ] ; then
3435        # We need to keep the img file as boot file for ia64 platform
3436        rm -f $MINDI_CACHE/{*img,*iso}
3437    else
3438        rm -f $MINDI_CACHE/*iso
3439    fi
3440    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3441        OfferToMakeBootableUSB
3442    fi
3443    OfferToMakeBootableISO
3444    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3445        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3446    else
3447        Die "Cannot find all.tar.gz, to be written to tape"
3448    fi
3449elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3450    OfferToMakeBootableUSB
3451else
3452    OfferToMakeBootableISO
3453fi
3454
3455if [ -f $MINDI_TMP/$MRCFG ]; then
3456    LogFile "INFO: Your $MRCFG file is:"
3457    LogFile "--------------------------"
3458    cat $MINDI_TMP/$MRCFG >> $LOGFILE
3459    LogFile "--------------------------"
3460else
3461    if [ _"$MONDO_SHARE" != _"" ] ; then
3462        LogIt "ERROR: You don't have a $MRCFG file !"
3463    fi
3464fi
3465# cleanup
3466LogAll "INFO: $FRIENDLY_OUTSTRING"
3467for mtpt in $FLOPPY_WAS_MOUNTED ; do
3468    mount $mtpt
3469done
3470MindiExit 0
Note: See TracBrowser for help on using the repository browser.