#!/bin/bash # $Id: mindi 3474 2015-10-06 22:50:50Z bruno $ # #----------------------------------------------------------------------------- # mindi - mini-Linux distro based on the user's filesystem & distribution # # Mindi can create a multi-image boot/root kit. The first image is the boot # disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1; # the third disk is data disk #2; and so it goes. # # See http://www.mondorescue.org for details. #----------------------------------------------------------------------------- ### Which arch are we on (useful for ia64 port) ARCH=`/bin/uname -m` KERVERRUN=`/bin/uname -r` # By default we use the running kernel as a reference KERVER=$KERVERRUN # In case of problem with udev you can try to add udevdebug MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10" MINDI_DEFAULT_BOOT_OPTION="interactive" # For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version # So this parameter only applies to non CD recovery. MINDI_BOOT_TIMEOUT="300" MINDI_REV=PBREV MINDI_VER=PBVER MINDI_VERSION=${MINDI_VER}-r$MINDI_REV MINDI_PREFIX=XXX MINDI_CONF=YYY MINDI_SBIN=${MINDI_PREFIX}/sbin MINDI_LIB=LLL MINDI_CACHE=/var/cache/mindi MRCFG=mondorestore.cfg # Temporary directory for mindi TMPDIR=/tmp EXTRA_SPACE=120000 # increase if you run out of ramdisk space BOOT_SIZE=86000 # size of the boot disk PROMPT_MAKE_CD_IMAGE="yes" # Ask if you want to make a CD Image to be written? # if this is set to 'no', then the image will be created automatically PROMPT_MAKE_USB_IMAGE="yes" # Ask if you want to make a USB Image to be written? # if this is set to 'no', then the image will be created automatically USE_OWN_KERNEL="yes" # If set to "no", you will be prompted for whether or not # you want to use your own kernel, or the supplied default. # If "yes" mindi will automatically use your own kernel. KERNEL_IS_XEN="no" # If set to "no", the kernel is not a Xen kernel # If "yes", mindi will modify isolinux.cfg for the Xen kernel. xenkernelpath="" MY_FSTAB=/etc/fstab TAPE_MODS="ht st osst ide-tape ide_tape" SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi" # ide-probe-mod IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc" PCMCIA_MODS="pcmcia_core ds yenta_socket" USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial" NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5" CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs nls_utf8" # Replace with that line for HP OCMP e.g. #DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain" DENY_MODS="kqemu vxfen" # Force some modules to be included FORCE_MODS="" LOGFILE=/var/log/mindi.log BOOT_MEDIA_MESSAGE="\ To format and restore all files automatically, type '0enuke07' .\n\ To restore some/all files interactively, type '0einteractive07' .\n\ To compare the archives with your filesystem, type '0ecompare07' .\n\ To boot to a command-line prompt (expert mode), type '0eexpert07' .\n\ \n\ You may add one or more parameters as well as per the function keys below\n\ e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\ \n\ If restoring from a local external disk or USB key, do not connect it \n\ until the boot-up has finished.\n\ \n\ \n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\ " FDISK=$MINDI_SBIN/mr-parted2fdisk # Using a config file allow to overwrite some values MINDI_CONFIG="$MINDI_CONF/mindi.conf" if [ -f $MINDI_CONFIG ]; then . $MINDI_CONFIG fi DEPLIST_FILE="$MINDI_CONF/deplist.txt" DEPLIST_DIR="$MINDI_CONF/deplist.d" ISO_CMD="/usr/bin/mkisofs" ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi" # Mindi set this as default in case it's invoked alone BOOT_TYPE="BIOS" # and we also check whether we're UEFI or not. if [ -d "/sys/firmware/efi" ]; then BOOT_TYPE="UEFI" ISO_OPT="$ISO_OPT -eltorito-alt-boot -e images/mindi-bootroot.img -no-emul-boot" else # Find MBR in case of bootable USB device to build MBRFILE=/usr/lib/syslinux/mbr.bin [ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin fi # Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs. # However, they use exactly the same command line parameters, so just # use genisoimage if it's available. if [ ! -x $ISO_CMD ]; then ISO_CMD=/usr/bin/genisoimage fi # Function to log on screen only LogScreen() { if [ -e /dev/stderr ] ; then echo -e "$1" >> /dev/stderr elif [ -e /usr/bin/logger ] ; then /usr/bin/logger -s $1 fi } # Function to log in log file only LogFile() { echo -e "$1" >> $LOGFILE if [ _"$2" != _"" ]; then grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE rm -f "$2" fi } # Function to log in both screen and logfile LogAll() { LogScreen "$1" LogFile "$1" "$2" } # Preserved for compatibility LogIt() { LogAll "$1" "$2" } # Last function called before exiting # Parameter is exit code value # Should be declared here as used immediately below potentialy MindiExit() { LogFile "Mindi $MINDI_VERSION is exiting" LogFile "End date : `date`" if [ _"$MONDO_SHARE" != _"" ] ; then echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log if [ -f $LOGFILE ]; then cat $LOGFILE >> /var/log/mondoarchive.log else echo "No LOGFILE available in that mindi run" >> /var/log/mondoarchive.log fi echo "--------------------------------------------------------------">> /var/log/mondoarchive.log fi cd / sync& # Clean temporary files only when standalone mindi if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then rm -Rf $MINDI_TMP fi exit $1 } Die() { local i if [ "$1" = "" ] ; then LogAll "FATAL ERROR" else LogAll "FATAL ERROR. $1" fi if [ _"$2" != _"" ]; then grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE fi rm -f "$2" LogAll "Please e-mail a copy of $LOGFILE to the mailing list." LogAll "See http://www.mondorescue.org for more information." LogAll "WE CANNOT HELP unless you enclose that file.\n" MindiExit -1 } # Now we can create what we need MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX` if [ $? -ne 0 ]; then df $TMPDIR Die "Unable to create a temporary directory ! Check space on $TMPDIR" fi if [ _"$MINDI_TMP" = _"" ]; then Die "MINDI_TMP is empty, aborting" fi if [ _"$MINDI_TMP" = _"/" ]; then Die "MINDI_TMP is /, aborting" fi export MINDI_TMP # ---------------------------------------------------------------------------- AbortHere() { [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE Die "Program is terminating in response to signal received from OS/user" } Aborted() { trap SIGHUP SIGTERM SIGTRAP SIGINT [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso Die "User abort." } AddFileToCfgIfExists() { [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3 } AddKeyboardMappingFile() { local mappath r included_list included_item i res ii sss mappath=$1 KBDEPTH=$(($KBDEPTH+1)) [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)" if [ -e "$bigdir/$mappath" ] ; then LogFile "INFO: $mappath already added" return elif [ -d "$bigdir/$mappath" ] ; then echo "Cannot add $mappath: it's a directory. Sorry." return fi LogFile "INFO: Added kbd map $mappath" if [ ! -e "$mappath" ] ; then mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"` if [ ! -e "$mappath" ] ; then LogAll "WARNING: Cannot add $mappath: kbd map file not found" return fi else echo -en "`basename $mappath | tr '.' '#' | sed 's/#kmap#gz//' | sed 's/#inc#gz//'` " | tr '#' '.' fi tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log if [ "`echo $mappath | grep -F ".gz"`" ] ; then included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2` else included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2` fi for included_item in $included_list ; do if [ ! -e "$included_item" ] ; then sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find` [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find` for ii in $sss ; do [ -e "$ii" ] && AddKeyboardMappingFile $ii done else AddKeyboardMappingFile $included_item fi done } CopyDependenciesToDirectory() { local outdir incoming counter d found tdir templog outdir=$1 templog=$MINDI_TMP/$$.log mkdir -p $outdir incoming=`ReadLine` counter=0 > $templog while [ "$incoming" != "" ] ; do # Non absolute file names should not arrive till here => skipped if [ `echo "$incoming" | cut -c1` != '/' ]; then LogAll "WARNING: Unable to handle $incoming" incoming=`ReadLine` continue fi # no parent directory of incoming should be a link, copy is not possible in that case d=`dirname "$incoming"` found="false" while [ $d != "/" -a $found = "false" ]; do [ -h "$d" ] && found="true" d=`dirname "$d"` done if [ -d "$incoming" -a ! -h "$incoming" ]; then find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0 elif [ -e "$incoming" ] && [ $found = "false" ]; then if [ ! -h "$incoming" ]; then tar cf - -C / $incoming 2> $templog | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog else tdir=`dirname "$incoming"` if [ ! -e "$outdir/$tdir" ]; then mkdir -p "$outdir/$tdir" fi cp --no-dereference --preserve=all $incoming "$outdir/$tdir" fi # Only uncompress modules if not using udevd if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming" fi [ -x "$outdir" ] && StripExecutable $outdir counter=$(($counter+1)) LogProgress $counter $2 fi incoming=`ReadLine` done } CountItemsIn() { local r r=0 for q in $1 ; do r=$(($r+1)) done echo $r } DropOptimizedLibraries() { local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res filelist=$1 outdir=$2 list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist` if [ "$list_of_optimized_libraries" = "" ] ; then return 0 fi echo -en "Dropping i686-optimized libraries if appropriate" for optimized_lib_name in $list_of_optimized_libraries ; do echo -en "." reason="" vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'` echo "$vanilla_lib_name" >> $filelist LogFile "INFO: Adding $vanilla_lib_name to filelist" mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null # This may return multiple files for resolved in `mr-read-all-link $vanilla_lib_name`; do LogFile "INFO: Adding as deps $resolved to filelist" vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'` if [ "$vanilla_resolved_name" != "$resolved" ]; then mkdir -p $outdir$resolved> /dev/null 2> /dev/null rmdir $outdir$resolved > /dev/null 2> /dev/null ln -sf $vanilla_resolved_name $outdir$resolved LogFile "INFO: Excluding deps $resolved" grep -Fvx "$resolved" "$filelist" > $filelist.tmp LogFile "INFO: Replacing it with $vanilla_resolved_name" echo "$vanilla_resolved_name" >> $filelist.tmp mv -f $filelist.tmp $filelist fi done done $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp mv -f $filelist.tmp $filelist echo -e "$DONE" } FindAndAddUserKeyboardMappingFile() { local r res mapfile mappath included_item included_list keyfile mp locale LogAll "INFO: Analyzing your keyboard's configuration." KEYDIR=/usr/lib/kbd [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd if [ ! -e "$KEYDIR" ] ; then LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time." return 0 fi if [ -e "/etc/sysconfig/keyboard" ] ; then LogFile "INFO: Red Hat-style config detected." keyfile=/etc/sysconfig/keyboard elif [ -e "/etc/vconsole.conf" ] ; then LogFile "INFO: New Fedora style config detected." keyfile=/etc/vconsole.conf elif [ -e "/etc/rc.d/rc.keymap" ] ; then LogFile "INFO: Slackware-style config detected." keyfile=/etc/rc.d/rc.keymap elif [ -e "/etc/rc.config" ] ; then LogFile "INFO: Debian-style config detected." keyfile=/etc/rc.config elif [ -e "/etc/console/boottime.kmap.gz" ] ; then LogFile "INFO: Debian-style config detected." mkdir -p $bigdir/tmp echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG KBDEPTH=0 mkdir -p $bigdir/etc/console cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE echo "" echo -e "$DONE" return 0 elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then LogFile "INFO: Ubuntu-style config detected." mkdir -p $bigdir/tmp if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then kbdfile="/etc/console-setup/boottime.kmap.gz" else kbdfile="/etc/console-setup/cached.kmap.gz" fi echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG KBDEPTH=0 mkdir -p $bigdir/etc/console-setup cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE echo "" echo -e "$DONE" return 0 elif [ -e "/etc/rc.conf" ] ; then LogFile "INFO: ArchLinux config detected." keyfile=/etc/rc.conf elif [ -e "/etc/conf.d/keymaps" ] ; then LogFile "INFO: Gentoo-style config detected." keyfile=/etc/conf.d/keymaps elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then LogFile "INFO: X11-style config detected." keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf else LogFile "Searching for rc.config ..." keyfile=`find /etc -name rc.config | head -n1` if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then LogAll "WARNING: Unknown config detected. Default keyboard map will be used." return else LogFile "INFO: Found $keyfile" fi fi if [ ! -e "$KEYDIR/keymaps" ] ; then LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used." return fi LogFile "INFO: keyfile=$keyfile" # For SLES we need to remove the .map.gz extension Cf #614 locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'` [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'` # Slackware [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2` # Gentoo, ArchLinux & New fedora [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'` # Fedora 19 LogFile "INFO: locale=$locale" # # Process the keymaps dir once for all # AddKeyboardMappingFile will use it recursively # find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"` [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"` # If we have multiple keymaps then log it !! echo "$mp" | grep -q " " >> $LOGFILE if [ $? -eq 0 ]; then LogAll "WARNING: Multiple keymaps found: $mp" LogFile "INFO: The following one will be used" fi for i in $mp ; do mappath=$i [ -e "$i" ] && [ ! -d "$i" ] && break done if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1") fi LogFile "INFO: mappath = $mappath" if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used." return fi LogAll "INFO: Adding the following keyboard mapping tables: " mkdir -p $bigdir/tmp echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG KBDEPTH=0 AddKeyboardMappingFile $mappath echo "" echo -e "$DONE" rm -f $MINDI_TMP/keymaps.find return 0 } FindLdlinux32Binary() { LDLINUXC32=/usr/lib/syslinux/ldlinux.c32 [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32 [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32 [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32 [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32 [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32 [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32 #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"` if [ ! -e "$LDLINUXC32" ]; then LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one" LDLINUXC32=/tmp/idoesnthopefullyexist else LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32" fi } FindMboot32Binary() { MBOOTC32=/usr/lib/syslinux/mboot.c32 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32 [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"` [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml" LogFile "INFO: Found mboot.c32 at $MBOOTC32" } FindIsolinuxBinary() { ISOLINUX=/usr/lib/isolinux.bin [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"` [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml" LogFile "INFO: Found isolinux.bin at $ISOLINUX" } GenerateGiantDependencyList() { local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved echo -en "Analyzing dependency requirements" outfile=$1 tempfile=$MINDI_TMP/$$.txt incoming=`ReadLine` > $tempfile progress=0 res=0 noof_lines=$2 while [ "$incoming" != "" ] ; do if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then incoming=`ReadLine` continue fi if [ "$incoming" = "LVMFILES:" ] ; then break fi filelist=`GenerateListForFile "$incoming"` r=$? [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found" res=$(($res+$r)) # LogFile "INFO: '$incoming' generates filelist '$filelist'" for fname in $filelist ; do [ "$fname" != "" ] && echo "$fname" >> $tempfile done progress=$(($progress+1)) LogProgress $progress $noof_lines incoming=`ReadLine` done if [ "$incoming" = "LVMFILES:" ] ; then incoming=`ReadLine` lvmversion="" while [ "$incoming" != "" ] ; do if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then incoming=`ReadLine` continue fi filelist=`GenerateListForFile "$incoming"` for tool in $filelist ; do lvmresolved=`readlink -f $tool` if [ "$tool" = "$lvmresolved" ]; then echo "$tool" >> $tempfile elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then if [ "$lvmversion" = "" ] ; then lvmversion=`$lvmresolved` echo "$lvmresolved" >> $tempfile fi toolstripped=`echo $tool | $AWK -F / '{print $NF;}'` if [ "$lvmversion" = "200" ]; then # pvdata and lvmcreate_initrd don't exist in LVM2 case "$toolstripped" in "pvdata") continue ;; "lvmcreate_initrd") continue ;; esac fi toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped if [ -e "$toolpath" ] ; then echo "$toolpath" >> $tempfile echo "$tool" >> $tempfile else toolpath="/lib/lvm-"$lvmversion"/"$toolstripped fi if [ -e "$toolpath" ] ; then echo "$toolpath" >> $tempfile echo "$tool" >> $tempfile else echo "Where are your LVM-Tools? Couldn't find $tool" fi else echo "$tool" >> $tempfile fi done progress=$(($progress+1)) LogProgress $progress $noof_lines incoming=`ReadLine` done fi echo -en "$DONE\nMaking complete dependency list" tr -s '/' '/' < $tempfile | sort -u > $tempfile.new mv -f $tempfile.new $tempfile > $outfile.pre progress=0 noof_lines=`cat $tempfile | wc -l` LogFile "---------------------------------" LogFile "List of dependencies: " LogFile "---------------------------------" for fname in `cat $tempfile` ; do echo "$fname" | tee -a $LOGFILE >> $outfile.pre LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre progress=$(($progress+1)) LogProgress $progress $noof_lines done if [ _"$MONDO_SHARE" != _"" ]; then mkdir -p $bigdir/tmp mkdir -p $bigdir/usr/bin if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then LogAll "\nINFO: Incorporating post-nuke tarball" old_pwd=`pwd` cd "$bigdir" tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log cd "$old_pwd" fi if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre else LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP" LogIt " I bet you've got a spare copy of Mondo or Mindi floating around on your system." LogIt " If Mindi was called by Mondo then send a bug report." LogIt " It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)" LogIt " Finally, run Mindi again." Die "Odd." fi cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW." if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then LogAll "\nINFO: Incorporating Network-related settings" for r in NETFS-* ; do cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?" LogFile "INFO: Copying $r to ramdisk" done fi fi tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile rm -f $tempfile $outfile.pre [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed." return $res } GenerateListForFile() { local files_found loc fname incoming i res incoming="$1" files_found="" res=0 for fname in $incoming ; do files_found="$files_found `LocateFile $fname`" done echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' ' } # Returns all disk devices which are part of a raid array GetAllRaidMembers() { $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab } GetFileSizeList() { local i for i in `find $1 -type d -o -print` ; do du -sk $i done } # Check kernel filesystem capabilites for accessing initrd image # Could be ext2 FS (old mode) or initramfs (new mode) # # Interface definition: # param #1: absolute path to kernel image GetInitrdFilesystemToUse() { # interface test: make sure we have one parameter if [ $# -ne 1 ]; then Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#." fi # interface parameters local lvKernelImage=$1 # local constants (filesystem magic strings) local lcMagicCramfs="<3>cramfs: wrong magic" local lcMagicExt2fs="EXT2-fs: blocksize too small for device." local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device." local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|[<]*6[>]*Trying to unpack rootfs image as initramfs" # local variables local lvOffset local lvScanRes local lvUseFilesystem # say where we are. LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage" # verify that file exists [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating." # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1 file $lvKernelImage 2>&1 | grep -q gzip if [ $? -eq 0 ]; then LogFile "INFO: Found a gzip compressed kernel $lvKernelImage" lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null` else LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage" # kernel is x86 boot sector in RHEL3/4 with embedded gzip content # get offet of gzip magic "1f8b0800" in file (for these older kernels) lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null` if [ $lvOffset -eq 0 ]; then LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs." lvScanRes=$lcMagicInitfs else lvOffset=`expr $lvOffset / 2` LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset." # scan again kernel image lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null` fi fi # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then lvUseFilesystem="ext2fs" elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then lvUseFilesystem="ext3fs" elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then lvUseFilesystem="initramfs" elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then lvUseFilesystem="cramfs" else # In that case, we are most probably after 2.6.30 and use the supported initramfs LogFile "WARNING: No automatic detection found previously. Supposing initramfs." LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of" LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs" lvUseFilesystem="initramfs" fi # say what we are using LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem." # return file system to use echo "$lvUseFilesystem" } # Searches members of raid device # $1: raid device (/dev/md...) GetRaidDevMembers() { if [ ! -f /etc/raidtab ]; then return fi $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab } ListAllPartitions() { local res currline partition all_partitions ap_orig remaining i j grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}' [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab if [ -e "/vmfs/volumes" ]; then # For VMWare ESX 3 get the device names of these volumes vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}' fi return } ListImagesForUser() { local path fname path=$MINDI_CACHE echo -en "In the directory '$path' you will find the images:-\n" for fname in `ls $path | grep -F mindi-` ; do printf "%19s " $fname done echo " " } ListKernelModulePaths() { local module_list module fname r kern module_list="$MODULES" # Remove unwanted modules from list for i in $DENY_MODS; do module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '` done ### ### Sq-Modification ... Use kernelname for module search path if specified ### if [ "${kernelname}" != "" ] then kern=${kernelname} else kern="$KERVERRUN" fi export KERVER=$kern ### ### Sq-Mod End ### # Get rid of duplicates for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1` if [ -z "$r" ]; then if [ "`echo "$MODULES" | grep -w $module`" ]; then r="[live module file not found]" else r="[extra module file not found]" fi else [ -f "$r" ] && echo "$r" fi LogFile "INFO: module $module --> $r" done find /lib/modules/$kern/modules.* -type f 2> /dev/null } # # Critical function which computes all dependencies (dyn. lib.) # for a list of binaries # LocateDeps() { local incoming fname deps incoming="$*" deps="" for fname in $incoming ; do if [ ! -e "$fname" ] ; then LogFile "WARNING: $fname does not exist; cannot be LDD'd." if echo $fname | grep lvm &> /dev/null ; then LogFile " This warning only affects you if you are using LVM." if echo "$MODULES" | grep lvm &> /dev/null ; then LogFile " I think you are, so please take heed!" else LogFile " I don't think you are, so don't worry about it." fi fi else deps="$deps $fname" fi done mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u } LocateFile() { local i j path fname_to_find location output resolved tmp stub cache_id loclist fname_to_find="$1" # It's an absolute path j=`echo "$fname_to_find" | cut -c1` if [ _"$j" = _"/" ]; then dn=`dirname $fname_to_find` # We suppose that the link is already included, just add the new file if [ -h "$dn" ]; then newdn=`readlink -f $dn` bn=`basename $fname_to_find` output="$newdn/$bn" else output="$fname_to_find" fi if [ -h "$output" ] ; then output="`mr-read-all-link $output` $output" fi echo "$output" return 0 fi # It's not an absolute path output="" for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do [ -h "$path" ] && continue [ ! -e "$path/$fname_to_find" ] && continue output="$path/$fname_to_find $output" if [ -h "$path/$fname_to_find" ] ; then output="`mr-read-all-link $path/$fname_to_find` $output" fi done if [ "$output" = "" ] ; then return 1 fi echo "$output" return 0 } LogProgress() { local i progress modres noof_lines title progress=$1 noof_lines=$2 title=$3 i=$(($progress*100)) if [ $noof_lines -ne 0 ]; then i=$(($i/$noof_lines)) else i=0 fi if [ _"$MONDO_SHARE" != _"" ]; then echo "$title $i%" else echo -en "\r\t\t\t\t\t\t\t\t" echo -en "$i" echo -en "%" modres=$(($progress%4)) [ "$modres" -eq "0" ] && echo -en "\t/" [ "$modres" -eq "1" ] && echo -en "\t-" [ "$modres" -eq "2" ] && echo -en "\t\\" [ "$modres" -eq "3" ] && echo -en "\t|" fi } # Called by TurnTgzIntoRdz, to make /tmp/$MRCFG MakeMondoConfigFile() { local outfile use_lzo use_comp use_star outfile=$1 > $outfile [ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile [ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile [ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile [ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no" use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no" use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no" use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes" use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no" echo "use-lzo $use_lzo" >> $outfile echo "use-gzip $use_gzip" >> $outfile echo "use-star $use_star" >> $outfile echo "use-lzma $use_lzma" >> $outfile echo "use-comp $use_comp" >> $outfile echo "boot-type $BOOT_TYPE" >> $outfile echo "datestamp `date`" >> $outfile [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile AddFileToCfgIfExists $MINDI_TMP/ISO-DIR iso-dir $outfile AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER bootloader.ver $outfile AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile # Deal with network configuration in a portable way if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile fi } # Get PV's for an LV GetPVsForLV() { if [ -n "$1" ]; then vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'` if [ -z "$vg" ]; then return fi $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}' fi } MakeMountlist() { local mountlist all_partitions current_partition \ partition_size partition_format outstring partition_number \ partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \ absolute_partition old_partition_fmt current_lvolume uname skip LogFile "------------------------------------" LogFile "Your raw fstab file looks like this:" LogFile "------------------------------------" cat $MY_FSTAB >> $LOGFILE LogAll "-----------------------------------" LogAll "Your mountlist will look like this:" LogAll "-----------------------------------" # mountlist(OUT) mountlist=$1 # NB: partition = device # NB: mountpt = where the device is mounted [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)" [ "$mountlist" != "" ] && rm -Rf $mountlist > $mountlist all_partitions="" if [ $LVM != "false" ]; then LogAll "INFO: Analyzing LVM..." $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res if [ $? -ne 0 ]; then LVM="false" fi # Excluded LVs and GVs are not reported here all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-` fi all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`" for i in $IMAGE_DEVS ; do mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted." done [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`" printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------ ------- ---------- | tee -a $LOGFILE useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs" for c_p in $all_partitions ; do # Skip fd/cd devices, network FS, cifs [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then current_partition=`readlink -f $c_p` if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then current_partition="$c_p" elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition` fi [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue else current_partition="$c_p" fi [ "$c_p" = "none" ] && continue redhat_label="" label="" uuid="" absolute_partition=`readlink -f $c_p` partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1` # set default in case we dont't find it str_to_find_fmt_with=$current_partition # This part tries to retrieve the correct device from a LABEL line in /etc/fstab # current_partition contains only first column of /etc/fstab if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then redhat_label=`echo "$current_partition" | cut -d'=' -f2` actual_dev="" # 1st try, findfs - the RHEL way of finding labels and their partitions if [ -x "/sbin/findfs" ]; then actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null` fi # 2nd try : blkid, the good way for all LABEL except swap if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1` # For LVM FS it will give a /dev/dm-# which should then be converted if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then major=`/bin/ls -l $actual_dev | $AWK '{print $5}'` minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'` for dev in `ls /dev/mapper/*`; do major1=`/bin/ls -l $dev | $AWK '{print $5}'` minor1=`/bin/ls -l $dev | $AWK '{print $6}'` if [ $major1 = $major ] && [ $minor1 = $minor ]; then actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'` break fi done fi fi # 3rd try, which works on a standard partition (ext2/3), but not on swap # For LVM gives a /dev/mapper entry if [ "x$actual_dev" = "x" ]; then actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1` fi # 4th try, with vol_id # SWAP only if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' ` for dev_swap in $list_swaps ; do dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"` if [ "x$dev_exists" != "x" ]; then actual_dev=$dev_swap break; fi done fi # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5 # LABEL=SW-cciss/c0d0p3 (RDP) # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p) # SWAP only if [ "x$actual_dev" = "x" -a _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then skip="" uname=$KERVERRUN [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16 # 2.6.12 needs 16 (FC3) [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16 # 2.6.19 and upper needs 1052 [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052 [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052 [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052 if [ $skip = "" ]; then Die "Your kernel is too old. I don't know how to support labelled swap spaces with it" fi for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1` do # Location of the swap label for kernel 2.6 try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null` if [ "x$try_dev_label" = "x$redhat_label" ]; then actual_dev=$try_dev fi done fi # Check if one of all those tries has known success if [ "x$actual_dev" != "x" ]; then current_partition=$actual_dev else Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id" fi # This part tries to retrieve the correct device from a UUID line in /etc/fstab # current_partition contains only first column of /etc/fstab elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then uuid=`echo "$current_partition" | cut -d'=' -f2` actual_dev="" # 1st try, findfs - the RHEL way of finding labels and their partitions if [ -x "/sbin/findfs" ]; then actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null` fi # 2nd try : blkid, the good way for all UUID except swap if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1` # For LVM FS it will give a /dev/dm-# which should then be converted if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then major=`/bin/ls -l $actual_dev | $AWK '{print $5}'` minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'` for dev in `ls /dev/mapper/*`; do major1=`/bin/ls -l $dev | $AWK '{print $5}'` minor1=`/bin/ls -l $dev | $AWK '{print $6}'` if [ $major1 = $major ] && [ $minor1 = $minor ]; then actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'` break fi done fi fi # 3th try, with vol_id if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' ` for dev in $list_dev ; do dev_exists=`/sbin/vol_id $dev | grep "$uuid"` if [ "x$dev_exists" != "x" ]; then actual_dev=$dev break; fi done fi # 4th try, with dumpuuid (VMWare only ?) for swap if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' ` for dev in $list_dev ; do dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"` if [ "x$dev_exists" != "x" ]; then actual_dev=$dev break; fi done fi # Check if one of all those tries has known success if [ "x$actual_dev" != "x" ]; then current_partition=$actual_dev else Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition." fi else # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-( # they use symlinks in fstab unrelated to what is shown in mount ! if [ _"$partition_mountpt" = _"" ]; then # set default in case we dont't find it for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then str_to_find_fmt_with=$tmpp partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1` break; fi done fi fi # Detects noauto partitions not mounted and exclude them partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1` if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" = "" ] ; then LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)" continue fi # Detects bind partitions and exclude them if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)" continue fi # Look for devices which have to be excluded skip=0 if [ "$MINDI_EXCLUDE_DEVS" ] ; then l="" list_of_devices="`mr-read-all-link $current_partition`" for d in $list_of_devices; do l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`" done # Remove PVs from LVs excluded l="$l `GetPVsForLV $current_partition`" # We want a single unique list list_of_devices="`echo $l | sort -u`" for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do if [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)" skip=1 continue fi done fi if [ $skip -eq 1 ]; then continue fi partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB` # Detects iso9660 ISO images and exclude them if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)" continue fi # Some distributions such as Debian do not put /dev// in fstab # for LVM partitions but use /dev/mapper/- instead. Fortunately, # the former is then a link to the latter, so we test whether # $current_partition is actually such a link or not and set # $current_lvolume accordingly. On Debian you may find more than one answer # so we remove the one corresponding to /dev/.static # On RedHat even if the device name is different (/dev/mapper/), the # principle is the same and we need to find the link to it as well. # Note that $current_lvolume may well be an # ordinary device. It is just to make sure that we feed the right value # into any of the LVM tools if possible. current_lvolume="$current_partition" if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then # .static dir are a Debian specificity current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`" echo $current_lvolume | grep -q ' ' if [ $? -eq 0 ]; then LogFile "WARNING: Multiple Logical Volumes found. Report to dev team" fi # if it's not found, it may well be a real device such as a multipath one # /dev/mapper/mpath... Thus we revert the situation so that next test succeed if [ _"$current_lvolume" = _"" ]; then current_lvolume="$current_partition" fi fi # # End of LVM device style variation code (other than $current_lvolume). if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then # Size computed via LVM not directly partition_size="lvm" else [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then # Skip swap files [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'` [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap" [ "$partition_format" != "swap" ] && partition_format="swap" if [ "$partition_size" = "" ] ; then totalsize=0 items=0 for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do totalsize=$(($totalsize+$i)) items=$(($items+1)) done [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0 [ "$partition_size" -lt "125000" ] && partition_size=125000 LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB" fi else partition_size=`SizeOfPartition $current_partition` fi fi [ "$partition_mountpt" = "swap" ] && partition_format="swap" [ "$partition_format" = "swap" ] && partition_mountpt="swap" if [ "$partition_mountpt" = "" ] ; then if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then if [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then partition_mountpt="raid" partition_format="raid" else partition_mountpt="lvm" partition_format="lvm" fi fi fi psz=$partition_size LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)" [ "$psz" != "lvm" ] && psz=$(($psz/1024)) if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then partition_mountpt="image" old_partition_fmt=$partition_format partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`" partition_size=$(($partition_size+1)); # just in case if [ "$partition_format" = "Linux" ] ; then LogFile "WARNING: Are you imaging a mounted swap partition? Silly..." LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format" partition_format=$old_partition_fmt fi fi if [ ! "$partition_mountpt" ] ; then LogFile "------- $FDISK -l $qq log ------------" for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9` [ "$partition_format" ] && break done LogFile "------- $FDISK log end ------------" if [ "$partition_format" = "Compaq diagnostics" ] ; then partition_format="compaq" elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring" continue fi fi if [ "$redhat_label" ]; then label="$redhat_label" elif [ "$uuid" ]; then label="$uuid" fi # On RHEL 7 they use UUID concretely, even when not mentioned in fstab # in order to mount the root part e.g. in grub. # One way to solve this is to add the UUID now, if there wasn't one so it's # restored correctly if [ _"$label" = _"" ]; then label=`blkid $current_partition | perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'` fi partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!) unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"` if [ "$current_partition" = "" ] ; then LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)" elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then partition_mountpt=raid partition_format=raid printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist else LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)" fi elif [ "$partition_format" = "" ] ; then LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)" elif [ "$partition_size" = "" ] ; then LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)" elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then continue else if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format" partition_format="vfat" fi printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist fi done LogAll "-----------------------------------" } CheckMountlist() { local file=$1 # Coherency verification ML01=`cat $file | wc -l` ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l` ML1=`$AWK '{print $1}' $file | sort -u | wc -l` ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l` if [ "$ML01" -ne "$ML1" ]; then LogFile "--------------------------------------------" LogAll "WARNING: Duplicate device entry in mountlist" LogFile "--------------------------------------------" fi if [ "$ML02" -ne "$ML2" ]; then LogFile "--------------------------------------------" LogAll "WARNING: Duplicate mountpoint entry in mountlist" LogFile "------------------------------------------------" fi } OfferToMakeBootableISO() { local i old_pwd files if [ -z "$ISO_CMD" ]; then LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image" return fi if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then echo -en "Shall I make a bootable CD image? (y/[n]) " read i [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0 fi rm -Rf $MINDI_TMP/iso mkdir -p $MINDI_TMP/iso/{images,archives} files=`ls $MINDI_CACHE/{*.gz,*.img}` cp -f $files $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy files to $MINDI_TMP/iso/images" for i in memdisk memtest.bin memtest.img ; do j=$MINDI_LIB/$i k=$MINDI_TMP/iso if [ -e "$j" ] ; then LogAll "INFO: Copying $j to $k" cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k" cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP" if [ _"$MONDO_SHARE" != _"" ]; then cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT" fi fi done MakeMessageFile $MINDI_TMP/iso | cut -c1-80 > $MINDI_TMP/iso/message.txt if [ $KERNEL_IS_XEN = "yes" ]; then FindMboot32Binary cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?" cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32 2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?" fi # Useful for syslinux 5.x FindLdlinux32Binary if [ -e $LDLINUXC32 ]; then cp $LDLINUXC32 $MINDI_TMP/iso/ldlinux.c32 2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to mindi tmp ($MINDI_TMP/iso/ldlinux.c32). Did you run out of disk space?" fi cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?" cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?" if [ _"$MONDO_SHARE" != _"" ]; then if [ $KERNEL_IS_XEN = "yes" ]; then cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MONDO_ROOT/xen.gz). Did you run out of disk space?" cp $MBOOTC32 $MONDO_ROOT/mboot.c32 2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MONDO_ROOT/mboot.c32). Did you run out of disk space?" fi if [ -e $LDLINUXC32 ]; then cp $LDLINUXC32 $MONDO_ROOT/ldlinux.c32 2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to $MONDO_ROOT/ldlinux.c32. Did you run out of disk space?" fi cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?" cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?" fi MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg if [ "$ARCH" != "ia64" ] ; then cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?" fi # copy boot stuff now generated in PrepareDataDiskImage if [ "$BOOT_TYPE" = "UEFI" ]; then (cd $MINDI_TMP/iso ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI) tbc="EFI" else (cd $MINDI_TMP/iso ; tar xfz $MINDI_CACHE/all.tar.gz ./boot) tbc="boot" fi old_pwd=`pwd` cd "$MINDI_TMP/iso" if [ "$ARCH" != "ia64" ] ; then if [ _"$MONDO_SHARE" != _"" ]; then cp -rf $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt,$tbc} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?" if [ -e $MINDI_TMP/iso/ldlinux.c32 ]; then cp $MINDI_TMP/iso/ldlinux.c32 $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy ldlinux.c32 (from $MINDI_TMP/iso/$LDLINUXC32) to $MONDO_ROOT. Did you run out of disk space?" fi if [ $KERNEL_IS_XEN = "yes" ]; then cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?" fi cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE fi CMD="$ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table ." else CMD="$ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.img -c images/boot.cat -no-emul-boot ." fi LogFile "Invoking $CMD" $CMD > /dev/null 2> $MINDI_TMP/mkisofs.log if [ "$?" -ne "0" ] ; then LogFile "----------- $ISO_CMD's errors --------------" LogAll "$ISO_CMD returned the following errors:" cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE LogAll "ERROR: Failed to create ISO image." else LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso" fi rm -f $MINDI_TMP/mkisofs.log cd "$old_pwd" } OfferToMakeBootableUSB() { local i files if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then echo -n "Shall I make a bootable USB device ? (y/[n]) " read i [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0 if [ "$USBDEVICE" = "" ]; then echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : " read dev USBDEVICE=$dev fi echo "WARNING: This will erase all content on $USBDEVICE" echo -en "Are you sure you want to use $USBDEVICE (y/[n]) " read i [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0 fi rm -Rf $MINDI_TMP/usb mkdir -p $MINDI_TMP/usb USBPART="${USBDEVICE}1" echo -en "Transforming $USBDEVICE in a Bootable device " echo -en "." LogFile "INFO: Transforming $USBDEVICE in a Bootable device" LogFile "INFO: Checking $USBDEVICE" $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE if [ $? -ne 0 ]; then LogAll "ERROR: Unable to access $USBDEVICE" LogAll " Make sure your USB device is plugged in" MindiExit -1 fi echo -en "." # Some distro do auto mount at that point (Ubuntu) LogFile "INFO: Unmounting $USBPART just in case" umount $USBPART 2>> $LOGFILE 1>> $LOGFILE if [ "$BOOT_TYPE" = "BIOS" ]; then # If your key has no MBR it may cause an issue # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE if [ -r $MBRFILE ]; then LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE" dd if=$MBRFILE of=$USBDEVICE else LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)" LogAll " on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE" fi fi LogFile "INFO: Preparing $USBDEVICE" cat > $MINDI_TMP/fdisk.txt << EOF d d d d n p 1 t b a 1 w EOF $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt if [ $? -ne 0 ]; then LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE" LogAll " Make sure your USB device is plugged in" $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE MindiExit -1 fi LogFile "fdisk build file" LogFile "----------------" cat $MINDI_TMP/fdisk.txt >> $LOGFILE LogFile "----------------" rm -f $MINDI_TMP/fdisk.txt LogFile "INFO: The USB device $USBDEVICE now looks like this:" $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE echo -en "." # Calling kpartx in case devices were not created if [ -x "/sbin/kpartx" ]; then /sbin/kpartx -a $USBDEVICE fi # Some distro do auto mount at that point (Ubuntu) LogFile "INFO: Unmounting $USBPART just in case again" umount $USBPART 2>> $LOGFILE 1>> $LOGFILE echo -en "." # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651 if [ "`which dmsetup`" != "" ]; then block_id="`echo $USBPART | sed 's/\/dev\///g'`" if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then LogFile "INFO: Removing $block_id from device mapper." sleep 1 dmsetup remove $block_id fi fi echo -en "." LogFile "INFO: Creating a vfat filesystem on $USBPART" mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE if [ $? -ne 0 ]; then LogAll "ERROR: Unable to create a vfat filesystem on $USBPART" LogAll " Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)" $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE MindiExit -1 fi echo -en "." LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb" mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE if [ $? -ne 0 ]; then LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb" LogAll " Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)" $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE MindiExit -1 fi echo -en "." mkdir -p $MINDI_TMP/usb/images files=`ls $MINDI_CACHE/{*.gz,*.img}` cp -f $files $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy files to $MINDI_TMP/usb/images" echo -en "." for i in memdisk memtest.bin memtest.img ; do j=$MINDI_LIB/$i k=$MINDI_TMP/usb if [ -e "$j" ] ; then LogFile "INFO: Copying $j to $k" cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k" cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP" fi done echo -en "." MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt echo -en "." cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?" echo -en "." cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE echo -en "." MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg echo -en "." LogAll "----------- syslinux's conf --------------" cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE LogAll "------------------------------------------" umount $MINDI_TMP/usb if [ "$ARCH" != "ia64" ] ; then syslinux -v 2>&1 | grep -q 4.02 if [ $? -eq 0 ]; then # This buggy version of syslinux requires a call to --stupid and not -s syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log res=$? else syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log res=$? fi if [ $res -ne 0 ] ; then LogAll "----------- syslinux's errors --------------" cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE LogAll "------------------------------------------" LogIt "ERROR: Failed to create USB image." else echo -e "$DONE" LogFile "INFO: Created bootable USB image on $USBDEVICE" fi rm -f $MINDI_TMP/syslinux.log else LogAll "ERROR: No USB boot support for ia64" MindiExit -1 fi } MakeMessageFile() { if [ -x "/bin/lsb_release" ]; then DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"` elif [ -r /etc/arch-release ]; then # this code must be written before /etc/issue test to avoid errors DESC="Arch Linux" if [ -r /var/log/pacman.log ]; then # there are no releases but we can get the last system upgrade # Output example: Arch Linux [2011-03-03 01:39] DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]" fi elif [ -x "/etc/os-release" ]; then DESC=`grep PRETTY_NAME /etc/os-release | cut -d= -f2` elif [ -x "/usr/bin/pbdistrocheck" ]; then # For pb >= 0.9.8 DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4 | sed 's/,/-/g'` elif [ -r /etc/issue.net ]; then DESC=`head -1 /etc/issue.net` elif [ -r /etc/issue ]; then DESC=`head -1 /etc/issue` else DESC="Unknown desc" fi sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/" if [ _"$MONDO_SHARE" != _"" ]; then if [ "$CDRECOVERY" != "yes" ] ; then if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then echo -en "Press <0eenter07> for 0cnetwork restore07\n" echo -en "$BOOT_MEDIA_MESSAGE" elif [ ! "$MINDI_TMP" ] ; then echo -en "FYI, this is _not_ a Mondo Rescue CD.\n" if [ -e "$MINDI_LIB/memtest.img" ] ; then echo -en "Type 'memtest' to test your PC's memory intensively.\nJust press to go to the main test menu.\n" fi else echo -en "$BOOT_MEDIA_MESSAGE" fi else echo -en "\ To restore your disk to factory defaults, type 'RESTORE' .\n\ CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n" fi fi # Also create the other help screens head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt } MakeBootConfFile() { local options i ooo options="" # Type of boot file (elilo or syslinux/isolinux) type=$1 if [ "$type" = "elilo" ]; then sep="=" sepdef="=" else sep=" " sepdef=" " if [ "$type" = "grub" ]; then sepdef="=" fi fi # Generic header for conf file if [ "$type" = "elilo" ]; then echo -en "prompt\n" elif [ "$type" = "grub" ]; then echo -en "pause Press a key when ready to restore\n" else echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n" fi # Compute which default option to boot from echo -en "default${sepdef}" if [ "$CDRECOVERY" = "yes" ] ; then if [ "$type" = "grub" ]; then # TODO: Which num ??? echo -en "0\n" else echo -en "RESTORE\n" fi # In case it's mondoarchive elif [ _"$MONDO_SHARE" != _"" ]; then if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then if [ "$type" = "grub" ]; then echo -en "3\n" else echo -en "iso\n" fi else if [ "$type" = "grub" ]; then echo -en "1\n" else echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n" fi fi else if [ "$type" = "grub" ]; then echo -en "0\n" else echo -en "expert\n" fi fi # Handle timeout if [ "$CDRECOVERY" != "yes" ] ; then echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n" else echo -en "timeout${sep}10000\n" fi echo -en "\n" # prepare which labels will be generated if [ "$CDRECOVERY" = "yes" ] ; then options="RESTORE expert" else if [ _"$MONDO_SHARE" != _"" ]; then options="interactive expert compare iso nuke isonuke" else options="expert" fi fi # Generate rest of conf file for i in $options ; do ooo=$i [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke" if [ "$type" = "elilo" ]; then outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n" elif [ "$type" = "grub" ]; then outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n" else ps="/" if [ "$type" = "syslinux" ]; then ps="" fi if [ $KERNEL_IS_XEN = "no" ]; then outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n" else outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n" fi fi echo -en "$outstr" done if [ -e "$MINDI_LIB/memtest.img" ] ; then if [ "$type" = "elilo" ]; then echo -en "image=/memtest.bin\n\tlabel=memtest\n" echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n" elif [ "$type" = "grub" ]; then echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n" else ps="/" if [ "$type" = "syslinux" ]; then ps="" fi echo -en "label memtest\n\tkernel ${ps}memtest.bin\n" echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n" fi fi } PrepareBootDiskImage() { # LILO originally local dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf bootimage kernelpath=$1 retval=0 old_pwd=`pwd` [ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel" echo -en "Making "$BOOT_SIZE"KB boot disk..." TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?" echo -en "..." imagefile=$MINDI_TMP/mindi-bootroot.img mkdir -p $mountpoint dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file" LogFile "INFO: Creating vfat filesystem on $imagefile" mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE if [ "$BOOT_TYPE" = "BIOS" ]; then # syslinux should be run on a local file (doen't work through NFS Cf: #297) syslinux $imagefile >> $LOGFILE 2>> $LOGFILE fi # Only move it now to its final destination and use it now mv $imagefile $MINDI_CACHE imagefile=$MINDI_CACHE/mindi-bootroot.img mount -t vfat -o loop $imagefile $mountpoint || LogAll "ERROR: Cannot mount (PBDI)" LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..." cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE if [ "$?" -ne "0" ] ; then LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint" LogAll " Please unload some of your modules and try again." LogAll "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)" LogAll " Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG" retval=$(($retval+1)) fi MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt mkdir -p $mountpoint/tmp if [ -f "$MINDI_TMP/$MRCFG" ]; then cp -f $MINDI_TMP/$MRCFG $mountpoint/tmp fi # copy the kernel across [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4` retval=0 cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE retval=$? if [ $KERNEL_IS_XEN = "yes" ]; then cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null let retval+=$? fi if [ "$retval" -ne "0" ] ; then LogFile "INFO: Files at mountpoint ($mountpoint) :" du -sk $mountpoint/* >> $LOGFILE LogFile "--- end of list of files ---" echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz cd "$old_pwd" umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)" rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)" [ "$imagefile" != "" ] && rm -f $imagefile LogIt "ERROR: Sorry, your kernel is too big for your image" Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG" fi max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`)) LogFile "INFO: Free space left on image = $free_space KB" LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" # make it bootable [ "$mountpoint" != "" ] && rm -f $mountpoint/zero [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE # copy boot stuff now generated in PrepareDataDiskImage if [ "$BOOT_TYPE" = "UEFI" ]; then (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI) else (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./boot) fi umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)" echo -en "..." rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)" if [ "$retval" -eq "0" ] ; then echo -en "...$DONE\n" LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n" else echo -en "...failed\n" LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n" fi #[ "$imagefile" != "" ] && rm -f $imagefile [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning $retval" return $retval } ParseModprobeForIncludes() { local MODPROBE_CONF mpincfile includes include MODPROBE_CONF=/etc/modprobe.conf mpincfile=$1 touch $mpincfile if [ -a $MODPROBE_CONF ]; then includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u) if [ -n "$includes" ]; then for include in $includes do if [ -a "$include" ]; then echo $include >> $mpincfile fi done fi fi } PrepareDataDiskImages() { local needlist bigdir diskdir res i j k old_pwd lines lfiles includefile rm -f $MINDI_CACHE/mindi.iso needlist=$MINDI_TMP/what-we-need.txt bigdir=$MINDI_TMP/bigdir mkdir -p $bigdir/usr/bin mkdir -p $bigdir/usr/sbin includefile=$MINDI_TMP/$$.includefile.txt lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal` if [ -e "$DEPLIST_FILE" ]; then lfiles="$DEPLIST_FILE $lfiles" fi lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l` ParseModprobeForIncludes $includefile lines=$(($lines+`cat $includefile | wc -l`)) cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines res=$? rm -f $includefile ListKernelModulePaths >> $needlist if [ "$res" -ne "0" ] ; then Die "You have $res files present in dependency list\nbut absent from filesystem." fi mkdir -p $bigdir/tmp if [ _"$MONDO_SHARE" != _"" ]; then # TODO: no reason to have the cfg file stored twice MakeMondoConfigFile $MINDI_TMP/$MRCFG cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null fi # Needs to be done after the MRCFG creation FindAndAddUserKeyboardMappingFile [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO DropOptimizedLibraries $needlist $bigdir echo -en "Assembling dependency files" CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist` # also copy io.sys and msdos.sys, if we can find them for i in `mount | cut -d' ' -f3` ; do for j in io.sys msdos.sys ; do [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE done done # master boot record, too i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null` if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then LogAll "INFO: Backing up $i's MBR" dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE sleep 1 sync j=$i [ -h "$j" ] && j=`readlink -f $j` LogAll "INFO: Creating /dev/boot_device ($j)" mkdir -p $bigdir/dev cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk" fi old_pwd=`pwd` cd "$bigdir" # Get terminfo content ti="usr/share/terminfo/l" if [ -d /$ti ]; then mkdir -p $ti cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo" fi if [ -e "$MONDO_SHARE/restore-scripts" ]; then cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts" fi if [ -d "/lib/dev-state" ]; then cp -a /lib/dev-state ./lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log fi cd "$old_pwd" echo -e "$DONE" TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1` MakeMountlist $MINDI_TMP/mountlist.txt CheckMountlist $MINDI_TMP/mountlist.txt mkdir -p $bigdir/tmp cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk" if [ _"$MONDO_SHARE" != _"" ]; then cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE fi if [ $LVM != "false" ]; then $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm if [ "$?" -ne "0" ]; then LVM="false" rm -f $bigdir/tmp/i-want-my-lvm else LogFile "Your i-want-my-lvm file content is:" LogFile "-----------------------------------" cat $bigdir/tmp/i-want-my-lvm >> $LOGFILE LogFile "-----------------------------------" fi fi LogFile "Your mountlist.txt file content is:" LogFile "-----------------------------------" cat $bigdir/tmp/mountlist.txt >> $LOGFILE LogFile "-----------------------------------" echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE if [ _"$MONDO_SHARE" != _"" ]; then for q in filelist.full.gz biggielist.txt ; do [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q" cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE done fi # copy (e)lilo/syslinux/grub/whatever stuff into it as well # to get it on the media (in addition to the boot part # and also to support UEFI boot mechanism bootdir=$bigdir/boot mkdir -p $bootdir if [ "$BOOT_TYPE" != "BIOS" ]; then if [ "$BOOT_TYPE" = "UNKNOWN" ]; then LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream" MindiExit -1 fi # EFI or UEFI # TODO: names are hard-coded for now if [ "$BOOT_TYPE" = "UEFI" ]; then # UEFI lilodir=$bigdir/EFI/BOOT mkdir -p $lilodir liloconf="$lilodir/grub.conf" # grub.efi for rhel6 and grubx64.efi for rhel7 lilobin="grub*.efi" MakeBootConfFile grub > $liloconf else # EFI lilodir=$bootdir mkdir -p $lilodir liloconf="$lilodir/elilo.conf" lilobin="elilo.efi" MakeBootConfFile elilo > $liloconf fi # Copy it so that CD-ROM menu entry is satisfied mountefi=0 df -T | grep /boot/efi | grep -qE 'vfat' if [ $? -ne 0 ]; then mount /boot/efi if [ $? -ne 0 ]; then echo "You have to mount your (U)EFI partition when using mindi" MindiExit -1 fi mountefi=1 fi el=`find /boot/efi -iname "$lilobin"` cp $el $lilodir if [ $mountefi -eq 1 ]; then umount /boot/efi 2>&1 > /dev/null fi else MakeBootConfFile isolinux > $bootdir/syslinux.cfg fi echo -en "Tarring and zipping the data content..." size_of_all_tools=`du -sk $bigdir | cut -f1` (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $MINDI_CACHE/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log) LogFile "Size of the data content" LogFile "------------------------" du -sk $MINDI_CACHE/*gz >> $LOGFILE LogFile "------------------------" echo -e "$DONE" FRIENDLY_OUTSTRING="Boot and data disk images were created." rm -rf $bigdir rm -f $needlist } Prompt() { echo -en "$1" read line } ReadLine() { local i incoming read incoming i=0 while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do i=$(($i+1)) read incoming done echo "$incoming" } SizeOfPartition() { local devpath drive res stub device=$1 if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then Die "Cannot find $device's size - is your /etc/fstab sane?" fi if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then res=`SizeOfRaidPartition $device` [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?" echo "$res" return 0 fi # patch from Bill - 2003/08/25 res=`$FDISK -s $device 2>> $LOGFILE` # end patch # take only the first in case of multiple mount (cifs, nfs, ...) [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1` [ "$res" = "" ] && res="-1" echo $res return 0 } SizeOfRaidPartition() { local real_dev smallest_size silly tmp silly=999999999 smallest_size=$silly for real_dev in `GetRaidDevMembers $1` ; do tmp=`SizeOfPartition $real_dev` [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp done if [ "$smallest_size" = "$silly" ] ; then echo "-1" return 1 else echo "$smallest_size" return 0 fi } StripExecutable() { local tmpfile tmpfile=$MINDI_TMP/stripped.$$.dat [ -d "$1" ] || [ -h "$1" ] && return cp -f $1 $tmpfile 2>> $LOGFILE strip $tmpfile 2> /dev/null if [ "$?" -eq "0" ] ; then cp -f $tmpfile $1 2>> $LOGFILE LogFile "INFO: Stripped binary $2" fi rm -f $tmpfile } KernelVer() { local fkern_ver fname fname=$1 file $fname | grep -q gzip if [ "$?" -eq "0" ] ; then # Used by ia64 fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"` else fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"` fi echo "$fkern_ver" } # WARNING: This function should just echo the final result !!! # TryToFindKernelPath() { local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root we_want_version=$KERVERRUN possible_kernels="" duff_kernels="" output="" if [ "$ARCH" = "ia64" ] ; then root="/boot/efi/efi" else root="/" fi # See if we're booted from a Xen kernel # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752 if [ -f /proc/xen/capabilities ]; then # It's a Xen kernel KERNEL_IS_XEN="yes" LogFile "INFO: It's a Xen kernel..." fi for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do [ ! -e "$fname" ] && continue [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel fkern_ver=`KernelVer $fname` [ "$fkern_ver" = "" ] && continue [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue [ -f "$fname" ] || continue [ -h "$fname" ] && continue kdate=`uname -v | $AWK '{for(i=1;i /dev/null | grep -F "$kdate"`" = "" ] ; then LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..." duff_kernels="$fname $duff_kernels" else [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue possible_kernels="$fname $possible_kernels" fi else if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..." duff_kernels="$fname $duff_kernels" else [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue possible_kernels="$fname $possible_kernels" fi fi done if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1` fi if [ ! "$possible_kernels" ] ; then LogAll "INFO: No kernel matches exactly. Are there any duff kernels?" possible_kernels="$duff_kernels" if [ ! "$possible_kernels" ] ; then LogAll "INFO: Sorry, no duff kernels either" else LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?" LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..." fi fi if [ $KERNEL_IS_XEN = "yes" ]; then possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '` noof_xenkernels=`CountItemsIn "$possible_xenkernels"` fi possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '` noof_kernels=`CountItemsIn "$possible_kernels"` if [ "$noof_kernels" -eq "0" ] ; then LogAll "Could not find your kernel." if [ -e "/boot/vmlinuz" ] ; then LogAll "INFO: Using /boot/vmlinuz as a last resort." output=/boot/vmlinuz else output="" fi elif [ "$noof_kernels" -eq "1" ] ; then kp=`echo "$possible_kernels" | sed s/' '//` LogFile "INFO: Your kernel is $kp (v$KERVERRUN)" output="$kp" else for i in $possible_kernels ; do if [ "`echo $i | grep "$KERVERRUN"`" ]; then LogAll "INFO: OK, I used my initiative and found that " LogAll "INFO: $i is probably your kernel. " output="$i" break fi done if [ ! -n "$output" ]; then if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then output=/boot/vmlinuz LogFile "INFO: Schlomo, this one's for you." else LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the " LogFile "INFO: boot disks will still work, probably. If one does not work, try another." LogFile "INFO: $possible_kernels" output="" fi fi fi if [ $KERNEL_IS_XEN = "yes" ]; then if [ "$noof_xenkernels" -eq "0" ]; then xenkernelpath="" elif [ "$noof_xenkernels" -eq "1" ]; then xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//` LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)" else for i in $possible_xenkernels ; do if [ "`echo $i | grep "$KERVERRUN"`" ]; then LogFile "INFO: OK, I used my initiative and found that " LogFile "INFO: $i is probably your Xen kernel. " xenkernelpath="$i" break fi done if [ ! -n "$xenkernelpath" ]; then new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '` if [ ! -n "$new_possible_xenkernels" ]; then xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1` LogFile "INFO: Using $xenkernelpath" else LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the " LogFile "INFO: boot disks will still work, probably. If one does not work, try another." LogFile "INFO: $possible_xenkernels" output="" xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1` LogFile "INFO: Using $xenkernelpath" fi fi fi if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then Die "Cannot find Xen kernel $xenkernelpath, aborting" fi fi #LogAll "TryToFindKernelPath found $output" echo "$output" } TurnTgzIntoRdz() { local tgz_dir_fname rdz_fname tempfile old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path d thelink templog tgz_dir_fname=$1 rdz_fname=$2 kernelsize=$3 maxsize=$(($BOOT_SIZE-$kernelsize)) maxsize=$(($maxsize*2)); # to allow for compression of 50% tempfile=$MINDI_TMP/temp.rd res=0 templog=$MINDI_TMP/$$.log > $templog echo -en "..." dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)" echo -en "..." LogFile "INFO: Creating ext2 filesystem on $tempfile" mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile" echo -en "..." mkdir -p $mountpoint mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel." echo -en "..." old_pwd=`pwd` cd "$mountpoint" # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness) for d in bin sbin lib lib64; do if [ -h "/$d" ]; then thelink=`readlink /$d` mkdir -p $mountpoint/$thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint." mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then rmdir $mountpoint/$d fi if [ ! -h $mountpoint/$d ]; then rm -f $mountpoint/$d 2> /dev/null (cd $mountpoint ; ln -s $thelink $d) || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint." fi fi done LogFile "INFO: what is now in $mountpoint" ls -alR $mountpoint >> $LOGFILE # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files # copy from rootfs into mountpoint for f in $tgz_dir_fname/*; do if [ ! -r $f ]; then Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence" else cp -af $f . 2>&1 >> $LOGFILE fi done (cd etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc) ln -sf usr/sbin/init linuxrc cd dev || Die "Can't cd to dev" tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz" rm -f dev-entries.tgz cd .. for w in insmod.static insmod.static.old ; do s=`which $w 2> /dev/null` if [ -e "$s" ] ; then tar cf - -C / $s 2> /dev/null | tar xf - fi done [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS # Copy of files mandatory for ssh to automate mount if sshfs is used mkdir -p $mountpoint/.ssh $mountpoint/tmp cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null cat > $mountpoint/tmp/myssh << EOF ssh -o StrictHostKeyChecking=no $* EOF chmod 755 $mountpoint/tmp/myssh # Copy of files mandatory for ld.so cp -a /etc/ld.so.c* $mountpoint/etc # Handle the case where busybox and mount are dynamically linked file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" if [ $? -eq 0 ]; then # We want to use the real mount and all the supported variants (nfs, cifs, ...) rm -f bin/mount fi # Copy of files from the minimal env needed as per the deplist.d/minimal.conf & udev.conf file (which includes all busybox deps) rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis for f in `cat $DEPLIST_DIR/minimal.conf $DEPLIST_DIR/udev.conf | grep -vE " *#.*|^#" | sort -u` ; do if [ -d $f ]; then for g in `find $f`; do echo $g >> $MINDI_TMP/minimal.lis LocateDeps $g >> $MINDI_TMP/minimal2.lis done else if [ -r $f ]; then echo $f >> $MINDI_TMP/minimal.lis LocateDeps $f >> $MINDI_TMP/minimal2.lis fi fi done for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do mr-read-all-link $f >> $MINDI_TMP/minimal.lis done # Initial / are trucated by tar finallist="" # Remove directories from the list, as tar/cp will create them anyway # and it may hurt if /lib is in it as on Debian/Ubuntu # recent bash says that -d is true for a link to a dir ! for f in `sort -u $MINDI_TMP/minimal.lis`; do if [ -e $f -a ! -d $f ] || [ -h $f ]; then # Do not overwrite files already in destination (avoid using option -n of cp not portable) if [ ! -e "$mountpoint/$f" ]; then finallist="$finallist $f" fi fi done rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis #tar cf - $finallist 2> $templog | tar xf - || LogIt "WARNING: Problem in minimal analysis" $templog echo "INFO: Copy the minimal env with cp -a --parents $finallist -t $mountpoint" 2>&1 >> $templog cp -a --parents $finallist -t $mountpoint 2> $templog || LogIt "WARNING: Problem in minimal analysis" $templog # In case target /bin dir still doesn't exist, create it before using it if [ ! -d $mountpoint/bin ]; then mkdir -p $mountpoint/bin fi # For older distributions expecting /sbin/init provides it if [ ! -e sbin/init ]; then (cd sbin ; ln -sf ../usr/sbin/init .) fi # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600 ln -sf /bin/bash bin/sh LogFile "INFO: Using bash as default shell" # Avoids an issue on some distro (RHEL5) rm -f $mountpoint/etc/ld.so.conf.d/kernelcap* mkdir -p $mountpoint/tmp # Management of udev (which includes modprobe in rules) ps auxww | grep -v grep | grep -qw udevd if [ $? -eq 0 ]; then echo "udev device manager found" > $mountpoint/tmp/USE-UDEV LogFile "INFO: udev device manager found" tar cf - -C / /etc/udev 2> $templog | tar xf - || LogIt "ERROR: Problem in /etc/udev analysis" $templog # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules # Do not do it if it's a link (Ubuntu 64 bits #503) if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then tar cf - -C / /lib64/udev 2> $templog | tar xf - || LogIt "ERROR: Problem in /lib64/udev analysis" $templog fi if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [ ! -h "/lib32/udev" ]; then tar cf - -C / /lib32/udev 2> $templog | tar xf - || LogIt "ERROR: Problem in /lib32/udev analysis" $templog fi if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [ ! -h "/lib/udev" ]; then tar cf - -C / /lib/udev 2> $templog | tar xf - || LogIt "ERROR: Problem in /lib/udev analysis" $templog fi if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [ ! -h "/usr/lib/udev" ]; then tar cf - -C / /usr/lib/udev 2> $templog | tar xf - || LogIt "ERROR: Problem in /usr/lib/udev analysis" $templog fi if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ]; then lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf` lis="" # Get only the files which exist in that list # and potentially their symlink structure for i in $lis2; do if [ -h $i ]; then j=$i while [ -h $j ]; do lis="$lis $j" j=`readlink -f $j` done lis="$lis $j" elif [ -f $i ]; then lis="$lis $i" fi done # And their deps LocateDeps $lis > $MINDI_TMP/udev.lis for i in $lis; do if [ "`echo $i | cut -c1`" = "/" ]; then j=`echo $i | cut -c2-` [ "$j" != "" ] && rm -f $j fi echo "$i" >> $MINDI_TMP/udev.lis done finallist="" # Remove directories from the list, as tar/cp will create them anyway # and it may hurt if /lib is in it as on Debian/Ubuntu # recent bash says that -d is true for a link to a dir ! for f in `sort -u $MINDI_TMP/udev.lis`; do if [ -e $f -a ! -d $f ] || [ -h $f ]; then # Do not overwrite files already in destination (avoid using option -n of cp not portable) if [ ! -e "$mountpoint/$f" ]; then finallist="$finallist $f" fi fi done #tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $templog echo "INFO: Copying udev related files with cp -a --parents $finallist -t $mountpoint/" 2>&1 >> $templog cp -a --parents $finallist -t $mountpoint/ 2> $templog || LogIt "ERROR: Problem in udev.lis analysis" $templog rm -f $MINDI_TMP/udev.lis else LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)" LogAll " mindi will use static devices which may cause problems" rm -f $mountpoint/tmp/USE-UDEV fi fi # Management of potential HW info (ProLiant only at the moment) rm -rf $MINDI_CACHE/bkphw mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE if [ -d $MINDI_CACHE/bkphw ]; then LogIt "INFO: Hardware Information found and saved ..." cp -rp $MINDI_CACHE/bkphw . if [ -f $MINDI_CACHE/tools.files ]; then lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` LocateDeps $lis > $MINDI_TMP/tools.lis tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $templog fi if [ -f $MINDI_CACHE/mindi-rsthw ]; then mv -f $MINDI_CACHE/mindi-rsthw . chmod 755 ./mindi-rsthw fi rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files fi # Management of perl scripts delivered needed at restore time LogIt "INFO: Analyzing perl modules dependencies" mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]*bin/mr-* 2> $templog > $MINDI_TMP/perl.lis || LogIt "ERROR: Problem in mindi-get-perl-modules" $templog LogFile "DBG4: Perl Modules found:" LogFile "-------------------------" cat $MINDI_TMP/perl.lis >> $LOGFILE LogFile "-------------------------" tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $templog for w in cdrom groovy-stuff ; do mkdir -p mnt/$w done tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2> $templog | tar xf - || LogIt "ERROR: Problem in fd dev analysis" $templog echo -en "..." cd / needed_modules="" list_of_groovy_mods="$CDROM_MODS $FORCE_MODS" if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then # For PXE boot list_of_groovy_mods="$list_of_groovy_mods $NET_MODS" fi for i in $DENY_MODS; do LogFile "INFO: Removing $i from the list of modules to load" list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '` done if [ "${kernelname}" != "" ]; then needed_modules_path=lib/modules/${kernelname} mkgmopt="-k ${kernelname}" else needed_modules_path=lib/modules/$KERVERRUN mkgmopt="-k $KERVERRUN" fi [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then mindi won't probably work." needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods` LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt" cp --parents -aL $needed_modules $mountpoint/ 2> $templog || LogIt "ERROR: Unable to copy modules to $mountpoint" $templog # Uncompress modules if not using udev and native modprobe if [ ! -f $mountpoint/tmp/USE-UDEV ]; then for i in $needed_modules; do if [ "`echo "$i" | grep -E ".gz$"`" ]; then gunzip -f $mountpoint/$i fi if [ "`echo "$i" | grep -E ".bz$"`" ]; then bunzip2 -f $mountpoint/$i fi if [ "`echo "$i" | grep -E ".xz$"`" ]; then unxz -f $mountpoint/$i fi LogFile "INFO: Uncompressing $i" done fi # Also copy modules.* in case of udev so that normal modprobe works tar cf - -C / /$needed_modules_path/modules.* 2> $templog | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $templog # Copy FW in case some drivers needs it for d in "/lib" "/usr/lib"; do if [ -d "$d/firmware" -a ! -h $d ]; then cp -a "$d/firmware" "$mountpoint/$d" fi done # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later) for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do if [ -d "$d/multipath" -a ! -h $d ]; then cp -a "$d/multipath" "$mountpoint/$d" fi done # Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts (cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e $mountpoint/bin/$i ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done) # Copy an additional ProLiant tool for OBDR support if [ -f $MINDI_TMP/OBDR ]; then found=0 if [ -x /usr/bin/hpsa_obdr_mode ]; then mkdir -p $mountpoint/usr/bin cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support" found=1 fi if [ -x /usr/bin/sg_wr_mode ]; then mkdir -p $mountpoint/usr/bin lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev" LocateDeps $lis > $MINDI_TMP/obdr.lis (cd $mountpoint ; tar cf - $lis -C / `sort -u $MINDI_TMP/obdr.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $templog) LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support" found=1 fi if [ $found -eq 0 ]; then LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool" LogAll " This may lead to a tape not going back to sequential mode after OBDR boot" fi fi if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then LogFile "INFO: Deleting devfsd daemon from ramdisk" [ ! -e "/sbin/devfsd" ] && LogFile " ...because /sbin/devfsd not found" rm -f $mountpoint/sbin/devfsd fi cd "$old_pwd" [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE if [ _"$MONDO_SHARE" != _"" ]; then MakeMondoConfigFile $mountpoint/tmp/$MRCFG cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk" cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk" echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER fi # Create module list to load at restore time rm -f $mountpoint/tmp/modules for m in $CDROM_MODS; do echo $m >> $mountpoint/tmp/modules done # copy boot stuff now generated in PrepareDataDiskImage if [ "$BOOT_TYPE" = "UEFI" ]; then (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI) else (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./boot) fi mkdir -p $mountpoint/proc LogFile "---------------------------" LogFile "Size of initial ramdisk:" LogFile "---------------------------" (cd "$mountpoint" ; du -sh .) >> $LOGFILE LogFile "---------------------------" LogFile "Content of initial ramdisk:" LogFile "---------------------------" (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE LogFile "---------------------------" # Determine what filesystem to use for initrd image LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd." gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}` [ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating." if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then # say what will be used LogFile "INFO: Creating an $gvFileSystem initrd image..." # kernel expects linuxrc in ext2 filesystem ( cd "$mountpoint" && ln -sf usr/sbin/init linuxrc ) # unmount loop filesystem and create image file using the standard approach umount $mountpoint || Die "Cannot unmount $tempfile" dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'` else bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'` fi MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs" gzip -c9 ${rdz_fname}.tmp > $rdz_fname rm -f ${rdz_fname}.tmp # log that we are done LogFile " ...done." elif [ "$gvFileSystem" = "initramfs" ]; then # say what will be used LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..." # make sure that cpio is there which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again." # go into filesystem cd "$mountpoint" # kernel expects init in cpio filesystem ln -sf usr/sbin/init init # create cpio image file and unmount loop filesystem find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null cd "$old_pwd" umount $mountpoint || Die "Cannot unmount $tempfile" # log that we are done LogFile " ...done." else Die "Filesystem $gvFileSystem not supported for initrd image. Terminating." fi if [ "$res" -eq "0" ] ; then echo -en "..." else echo -en "\rMade an rdz WITH ERRORS. \n" fi return 0 } ############################################################################## #----------------------------------- Main -----------------------------------# ############################################################################## # Now we can create what we need mkdir -p $MINDI_TMP # --nolog needs to be first, and is used in analyze-my-lvm if [ "$1" = "--nolog" ] ; then shift LOGFILE=/dev/stderr else > $LOGFILE fi if [ "$1" = "--printvar" ] ; then shift if [ _"$1" != _"" ] ; then set | grep -Ew "^$1" | cut -d= -f2 fi exit 0 fi LogFile "mindi v$MINDI_VERSION" LogFile "$ARCH architecture detected" LogFile "mindi called with the following arguments:" echo "$@">> $LOGFILE LogFile "Start date : `date`" LogFile "-----------------------------" [ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!" # Log some capital variables [ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly." [ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly." LogFile "MONDO_SHARE = $MONDO_SHARE" LogFile "MINDI_LIB = $MINDI_LIB" LogFile "MINDI_SBIN = $MINDI_SBIN" LogFile "MINDI_CONF = $MINDI_CONF" # Purge from potential old run if [ _"$MINDI_CACHE" = _"" ]; then Die "MINDI_CACHE undefined" else LogFile "MINDI_CACHE = $MINDI_CACHE" fi if [ -f $MINDI_CONFIG ]; then LogFile "-----------------------------" LogFile " Mindi configuration file " LogFile "-----------------------------" grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE LogFile "-----------------------------" fi LogFile "In Mindi" LogFile "--------" LogFile "EXTRA_SPACE = $EXTRA_SPACE" LogFile "BOOT_SIZE = $BOOT_SIZE" LogFile "--------" trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT # Sanity checks which which > /dev/null 2> /dev/null || Die "Please install 'which'." which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable." which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution." which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`" if which awk &> /dev/null ; then if ! which gawk &> /dev/null ; then LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n" fi fi which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path" [ ! -e "$FDISK" ] && Die "Cannot find $FDISK" [ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7" # Update the PATH variable if incomplete if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then PATH=$PATH:/sbin:/usr/sbin export PATH LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily." LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..." LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example." fi if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?" fi ### TODO ### Fix as it's not mandatory on ia64 if [ "$ARCH" = "ia64" ] ; then if which elilo &> /dev/null ; then LILO_EXE=elilo else LILO_EXE=`which false 2> /dev/null` fi else FindIsolinuxBinary fi trap "Aborted" SIGTERM DONE="\r\t\t\t\t\t\t\t\tDone. " kernelpath="" MONDO_ROOT=/var/cache/mondo mkdir -p $MONDO_ROOT if [ -d "/proc/lvm" ]; then # LVM v1 LVMCMD="" LVM="v1" elif [ -d "/dev/mapper" ]; then # LVM v2 LVMCMD="lvm" LVM="v2" else LVM="false" fi if [ -e "/proc/cmdline" ]; then CMDLINE="/proc/cmdline" elif [ -e "/tmp/cmdline" ]; then CMDLINE="/tmp/cmdline" else CMDLINE="/dev/null" fi LogFile "INFO: LVM set to $LVM" LogFile "----------" LogFile "mount result:" LogFile "-------------" mount >> $LOGFILE if [ -e /etc/raidtab ]; then LogFile "-------------" LogFile "/etc/raidtab content:" LogFile "-------------" cat /etc/raidtab >> $LOGFILE else LogFile "No file /etc/raidtab" fi if [ -e /etc/mdadm.conf ]; then LogFile "-------------" LogFile "/etc/mdadm.conf content:" LogFile "-------------" cat /etc/mdadm.conf >> $LOGFILE else LogFile "-------------" LogFile "No file /etc/mdadm.conf" fi LogFile "-------------" LogFile "cat $CMDLINE" LogFile "-------------" cat $CMDLINE >> $LOGFILE LogFile "-------------" LogFile "cat /proc/swaps:" LogFile "-------------" cat /proc/swaps >> $LOGFILE LogFile "-------------" if [ -e /proc/mdstat ]; then LogFile "cat /proc/mdstat:" LogFile "-------------" cat /proc/mdstat >> $LOGFILE else LogFile "No pseudo file /proc/mdstat" fi LogFile "-------------" LogFile "cat /proc/partitions:" LogFile "-------------" cat /proc/partitions >> $LOGFILE LogFile "-------------" LogFile "cat /proc/filesystems:" LogFile "-------------" cat /proc/filesystems >> $LOGFILE LogFile "-------------" LogFile "lsmod result:" LogFile "-------------" lsmod >> $LOGFILE MODULES="`cat /proc/modules | $AWK '{print $1}'`" if [ -x /usr/sbin/esxcfg-module ]; then LogFile "-------------" LogFile "INFO: VMWare ESX server detected - Enabling dedicated support" LogFile "-------------" LogFile "VMWare modules" LogFile "-------------" /usr/sbin/esxcfg-module -l >> $LOGFILE MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`" fi LogFile "-------------" LogFile "FORCE_MODS:" LogFile "-------------" LogFile "$FORCE_MODS" LogFile "-------------" LogFile "DENY_MODS:" LogFile "-------------" LogFile "$DENY_MODS" LogFile "-------------" LogFile "df result:" LogFile "----------" df -aT >> $LOGFILE LogFile "-------------" LogFile "df -i result:" LogFile "----------" df -i >> $LOGFILE LogFile "-------------" if [ -r /boot/grub/menu.lst ]; then LogFile "-------------" LogFile "INFO: /boot/grub/menu.lst content" LogFile "-------------" cat /boot/grub/menu.lst >> $LOGFILE LogFile "-------------" fi if [ -r /boot/grub/grub.conf ]; then LogFile "-------------" LogFile "INFO: /boot/grub/grub.conf content" LogFile "-------------" cat /boot/grub/grub.conf >> $LOGFILE LogFile "-------------" fi if [ -r /boot/grub/grub.cfg ]; then LogFile "-------------" LogFile "INFO: /boot/grub/grub.cfg content" LogFile "-------------" cat /boot/grub/grub.cfg >> $LOGFILE LogFile "-------------" fi if [ -r /boot/grub/device.map ]; then LogFile "-------------" LogFile "INFO: /boot/grub/device.map content" LogFile "-------------" cat /boot/grub/device.map >> $LOGFILE LogFile "-------------" fi if [ -r /etc/lilo.conf ]; then LogFile "-------------" LogFile "INFO: /etc/lilo.conf content" LogFile "-------------" cat /etc/lilo.conf >> $LOGFILE fi if [ -d /boot/efi ]; then gcf=`find /boot/efi -name 'grub.c*'` if [ _"$gcf" = _"" ]; then LogFile "Found a /boot/efi directory without a grub config file in it" else LogFile "-------------" LogFile "INFO: $gcf content" LogFile "-------------" cat $gcf >> $LOGFILE LogFile "-------------" fi fi LogFile "Full fdisk info" LogFile "---------------" $FDISK -l >> $LOGFILE LogFile "----------------" # Compute libata version laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/ *//g' 2> /dev/null` # If libata v2 is used then remove ide-generic as it will perturbate boot if [ "`echo $MODULES | grep libata`" ]; then if [ "$laver" = "2" ]; then DENY_MODS="$DENY_MODS ide-generic" LogFile "INFO: ide-generic removed from module list as your system uses libata v2+" LogFile "-------------" fi fi # Check for McAfee which disturbs the access to some files (tgz in articular) if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files." LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'" LogFile "WARNING: You have two options:" LogFile "WARNING: - Exclude all directories with special files (check McAfee System Events Log)" LogFile "WARNING: - Disable the scanner during the backup" fi # Check for ISO_CMD command if [ ! -x $ISO_CMD ]; then LogFile "NOTE: No CD image (ISO file) utility found" fi FLOPPY_WAS_MOUNTED="" for mtpt in /media/floppy /mnt/floppy /floppy ; do if mount | grep -w $mtpt &> /dev/null ; then FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt" umount $mtpt fi done # # If we have a USB device we need to store info # and remove it from the parameters line # if [ "$#" -ne "0" ] ; then if [ "$1" = "--usb" ] ; then shift USBDEVICE=$1 if [ _"$USBDEVICE" = _"" ]; then Die "No USB device specified" fi shift fi fi if [ "$#" -ne "0" ] ; then if [ "$1" = "--findkernel" ] ; then resk=`TryToFindKernelPath` # Avoids logfile content for mondo export MONDO_SHARE="" if [ "$resk" = "" ] ; then if [ $KERNEL_IS_XEN = "yes" ]; then echo "$xenkernelpath" LogFile "INFO: xenkernelpath = $xenkernelpath" MindiExit 0 else MindiExit -1 fi else echo "$resk" LogFile "INFO: kernelpath = $resk" MindiExit 0 fi elif [ "$1" = "--locatedeps" ] ; then [ ! "$2" ] && Die "Please specify the binary to look at" LocateDeps $* # Avoids logfile content for mondo export MONDO_SHARE="" MindiExit $? elif [ "$1" = "--readalllink" ] ; then [ ! "$2" ] && Die "Please specify the binary to look at" # Avoids logfile content for mondo export MONDO_SHARE="" mr-read-all-link $2 MindiExit $? elif [ "$1" = "--makemessage" ] ; then MakeMessageFile | cut -c1-80 MindiExit 0 elif [ "$1" = "--makemountlist" ] ; then [ ! "$2" ] && Die "Please specify the output file" MakeMountlist $2 CheckMountlist $2 # Avoids logfile content for mondo export MONDO_SHARE="" MindiExit $? elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then echo "Mindi v$MINDI_VERSION" # Avoids logfile content for mondo export MONDO_SHARE="" MindiExit 0 elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then MONDO_TMP=$2 # Change MINDI_TMP for the one provided by mondo # So that it can get back the built files if [ _"$MONDO_TMP" = _"" ]; then Die "MONDO_TMP is empty, aborting" fi if [ _"$MONDO_TMP" = _"/" ]; then Die "MONDO_TMP is /, aborting" fi mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE rmdir $MINDI_TMP export MINDI_TMP=$MONDO_TMP mkdir -p $MINDI_TMP # This is the scratch dir in mondo - subdir images MINDI_CACHE=$3 LogFile "MINDI_CACHE = $MINDI_CACHE" kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath="" [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath` ### ### Sq-Modification... ### Attempt to locate kernel specific module path ### if module path is found then use it other wise use uname -r to set it... ### if [ $KERNEL_IS_XEN = "yes" ]; then LogAll "INFO: xenkernelpath = $xenkernelpath" fi kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'` if [ ! -d "/lib/modules/$kernelname" ]; then LogAll "WARNING: Module path for ${kernelpath} not found..." LogAll " using running kernel\'s modules." kernelname=$KERVERRUN else LogAll "INFO: Using modules for kernel: ${kernelname}" fi LogAll "INFO: kernelname = $kernelname" LogAll "INFO: kernelpath = $kernelpath" ### ### end of Sq-Modification ### TAPEDEV=$5 TAPESIZE=$6 FILES_IN_FILELIST=$7 USE_LZO=$8 CDRECOVERY=$9 if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then IMAGE_DEVS="" else IMAGE_DEVS="`echo "${10}" | tr '|' ' '`" fi if [ "${11}" ] ; then LILO_OPTIONS="" # LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes." fi LAST_FILELIST_NUMBER=${12} ESTIMATED_TOTAL_NOOF_SLICES=${13} export MINDI_EXCLUDE_DEVS="${14}" USE_COMP="${15}" USE_LILO="${16}" USE_STAR="${17}" INTERNAL_TAPE_BLOCK_SIZE="${18}" DIFFERENTIAL="${19}" USE_GZIP="${20}" USE_LZMA="${21}" NOT_BOOT="${22}" BOOT_TYPE="${23}" [ "$USE_COMP" = "" ] && USE_COMP=yes [ "$USE_GZIP" = "" ] && USE_GZIP=no [ "$USE_LZMA" = "" ] && USE_LZMA=no [ "$NOT_BOOT" = "" ] && NOT_BOOT=no [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine." # MONDO_ROOT is the real scratchdir MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'` if [ _"$MONDO_ROOT" != _"" ]; then mkdir -p $MONDO_ROOT else Die "MONDO_ROOT is undefined" fi else LogScreen "Syntax: mindi (--custom ....)" MindiExit -1 fi fi if [ _"$MINDI_CACHE" != _"" ]; then rm -rf $MINDI_CACHE/* 2> /dev/null mkdir -p $MINDI_CACHE fi [ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no if [ _"$MONDO_SHARE" = _"" ]; then LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION" LogIt "Latest Mindi is available from http://www.mondorescue.org" LogIt "BusyBox sources are available from http://www.busybox.net" LogIt "------------------------------------------------------------------------------" else LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks" fi if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then LogIt "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`" else LogIt "ERROR: Unable to find mindi-busybox, please install it" MindiExit -1 fi for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do modinfo $i 2> /dev/null 1> /dev/null if [ $? -eq 0 ]; then modprobe $i 2>&1 > /dev/null fi done LogFile "DIFFERENTIAL = $DIFFERENTIAL" LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE" LogFile "NOT_BOOT = '$NOT_BOOT'" if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then LogIt "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else." MakeMondoConfigFile $MINDI_TMP/$MRCFG MakeMountlist $MINDI_TMP/mountlist.txt CheckMountlist $MINDI_TMP/mountlist.txt mkdir -p $MINDI_TMP/small-all/tmp cd "$MINDI_TMP/small-all" cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz" tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log sleep 2 LogIt "Done. Exiting." MindiExit 0 fi if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE" fi if [ "$kernelpath" = "" ] ; then [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k to specify kernel." echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?" read ch if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then USE_OWN_KERNEL="yes" else USE_OWN_KERNEL="no" fi if [ "$USE_OWN_KERNEL" = "yes" ]; then kernelpath=`TryToFindKernelPath` if [ "$kernelpath" = "" ] ; then echo -n "Please enter kernel path : " read kernelpath fi fi fi echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE [ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..." mountpoint=$MINDI_TMP/mountpoint.$$ PrepareDataDiskImages export ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE)) LogFile "INFO: Ramdisk will be $ramdisk_size KB" PrepareBootDiskImage $kernelpath || Die "Failed to create boot disk image." [ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\ ...Or type 'memtest' to test your PC's RAM thoroughly.\n" if [ _"$MONDO_SHARE" = _"" ]; then ListImagesForUser OfferToMakeBootableISO if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then OfferToMakeBootableUSB fi LogAll "Finished." elif [ "$TAPEDEV" ] ; then if [ "$ARCH" != "ia64" ] ; then # We need to keep the img file as boot file for ia64 platform rm -f $MINDI_CACHE/{*img,*iso} else rm -f $MINDI_CACHE/*iso fi if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then OfferToMakeBootableUSB fi OfferToMakeBootableISO if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE else Die "Cannot find all.tar.gz, to be written to tape" fi elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then OfferToMakeBootableUSB else OfferToMakeBootableISO fi if [ -f $MINDI_TMP/$MRCFG ]; then LogFile "INFO: Your $MRCFG file is:" LogFile "--------------------------" cat $MINDI_TMP/$MRCFG >> $LOGFILE LogFile "--------------------------" else if [ _"$MONDO_SHARE" != _"" ] ; then LogIt "ERROR: You don't have a $MRCFG file !" fi fi # cleanup LogAll "INFO: $FRIENDLY_OUTSTRING" for mtpt in $FLOPPY_WAS_MOUNTED ; do mount $mtpt done MindiExit 0