source: branches/3.2/mindi/mindi @ 3310

Last change on this file since 3310 was 3310, checked in by Bruno Cornec, 6 years ago
  • Remove EXTRA_MODS variable as it was leading to modules missing at restore time. Now part of CDROM_MODS and were anyway loaded 99% of the time.
  • Optimize modules list computation between mindi and restore init script.
  • As a consequence do not try to relaod modules list twice as there is not difference in modules list anymore, eveything is in the boot part.
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 119.9 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3310 2014-07-03 20:24:14Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38MRCFG=mondorestore.cfg
39
40# Temporary directory for mindi
41TMPDIR=/tmp
42
43EXTRA_SPACE=120000      # increase if you run out of ramdisk space
44BOOT_SIZE=65600         # size of the boot disk
45
46PROMPT_MAKE_CD_IMAGE="yes"
47    # Ask if you want to make a CD Image to be written?
48    # if this is set to 'no', then the image will be created automatically
49
50PROMPT_MAKE_USB_IMAGE="yes"
51    # Ask if you want to make a USB Image to be written?
52    # if this is set to 'no', then the image will be created automatically
53
54USE_OWN_KERNEL="yes"
55    # If set to "no", you will be prompted for whether or not
56    # you want to use your own kernel, or the supplied default.
57    # If "yes" mindi will automatically use your own kernel.
58
59KERNEL_IS_XEN="no"
60    # If set to "no", the kernel is not a Xen kernel
61    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
62xenkernelpath=""
63 
64MY_FSTAB=/etc/fstab
65TAPE_MODS="ht st osst ide-tape ide_tape"
66SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr"
67
68# ide-probe-mod
69IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio"
70PCMCIA_MODS="pcmcia_core ds yenta_socket"
71USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
72NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp"
73CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs "
74# Replace with that line for HP OCMP e.g.
75#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
76DENY_MODS="kqemu vxfen"
77# Force some modules to be included
78FORCE_MODS=""
79
80# Find MBR in case of bootable USB device to build
81MBRFILE=/usr/lib/syslinux/mbr.bin
82[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
83[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
84[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
85[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
86
87LOGFILE=/var/log/mindi.log
88BOOT_MEDIA_MESSAGE="\
89To format and restore all files automatically, type '0enuke07' <enter>.\n\
90To restore some/all files interactively, type '0einteractive07' <enter>.\n\
91To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
92To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
93\n\
94You may add one or more parameters as well as per the function keys below\n\
95e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
96\n\
97If restoring from a local external disk or USB key, do not connect it \n\
98until the boot-up has finished.\n\
99\n\
100\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
101"
102FDISK=$MINDI_SBIN/parted2fdisk
103
104# Using a config file allow to overwrite some values
105MINDI_CONFIG="$MINDI_CONF/mindi.conf"
106if [ -f $MINDI_CONFIG ]; then
107    . $MINDI_CONFIG
108fi
109DEPLIST_FILE="$MINDI_CONF/deplist.txt"
110DEPLIST_DIR="$MINDI_CONF/deplist.d"
111
112ISO_CMD="/usr/bin/mkisofs"
113ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
114
115# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
116# However, they use exactly the same command line parameters, so just
117# use genisoimage if it's available.
118if [ ! -x $ISO_CMD ]; then
119    ISO_CMD=/usr/bin/genisoimage
120fi
121
122
123# Function to log on screen only
124LogScreen() {
125    if [ -e /dev/stderr ] ; then
126        echo -e "$1" >> /dev/stderr
127    elif [ -e /usr/bin/logger ] ; then
128        /usr/bin/logger -s $1
129    fi
130}
131
132# Function to log in log file only
133LogFile() {
134
135    echo -e "$1" >> $LOGFILE
136    if [ _"$2" != _"" ]; then
137        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
138    fi
139    rm -f "$2"
140}
141
142# Function to log in both screen and logfile
143LogAll() {
144    LogScreen "$1"
145    LogFile "$1" "$2"
146}
147
148# Preserved for compatibility
149LogIt() {
150    LogAll "$1" "$2"
151}
152
153# Last function called before exiting
154# Parameter is exit code value
155# Should be declared here as used immediately below potentialy
156MindiExit() {
157    LogFile "Mindi $MINDI_VERSION is exiting" 
158    LogFile "End date : `date`" 
159    if [ _"$MONDO_SHARE" != _"" ] ; then
160        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
161        if [ -f $LOGFILE ]; then
162            cat $LOGFILE >> /var/log/mondoarchive.log
163        else
164            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
165        fi
166        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
167    fi
168
169    cd /
170    sync&
171
172    # Clean temporary files only when standalone mindi
173    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
174        rm -Rf $MINDI_TMP
175    fi
176    exit $1
177}
178
179Die() {
180    local i
181    if [ "$1" = "" ] ; then
182        LogAll "FATAL ERROR"
183    else
184        LogAll "FATAL ERROR. $1"
185    fi
186    if [ _"$2" != _"" ]; then
187        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
188    fi
189    rm -f "$2"
190
191    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
192    LogAll "See http://www.mondorescue.org for more information."
193    LogAll "WE CANNOT HELP unless you enclose that file.\n"
194    MindiExit -1
195}
196
197# Now we can create what we need
198MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
199if [ $? -ne 0 ]; then
200    df $TMPDIR
201    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
202fi
203if [ _"$MINDI_TMP" = _"" ]; then
204    Die "MINDI_TMP is empty, aborting"
205fi
206if [ _"$MINDI_TMP" = _"/" ]; then
207    Die "MINDI_TMP is /, aborting"
208fi
209export MINDI_TMP
210
211# ----------------------------------------------------------------------------
212
213
214AbortHere() {
215    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
216    Die "Program is terminating in response to signal received from OS/user"
217}
218
219
220Aborted() {
221    trap SIGHUP SIGTERM SIGTRAP SIGINT
222    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
223    [ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
224    Die "User abort."
225}
226
227
228AddFileToCfgIfExists() {
229    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
230}
231
232
233AddKeyboardMappingFile() {
234    local mappath r included_list included_item i res ii sss
235    mappath=$1
236    KBDEPTH=$(($KBDEPTH+1))
237    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
238    if [ -e "$bigdir/$mappath" ] ; then
239        LogFile "INFO: $mappath already added"
240        return
241    elif [ -d "$bigdir/$mappath" ] ; then
242        echo "Cannot add $mappath: it's a directory. Sorry."
243        return
244    fi
245    LogFile "INFO: Added kbd map $mappath"
246    if [ ! -e "$mappath" ] ; then
247        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
248        if [ ! -e "$mappath" ] ; then
249            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
250            return
251        fi
252    else
253        echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
254    fi
255
256    #cp -a -n --parents -t $mappath $bigdir 2>> $MINDI_TMP/$$.log || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
257    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
258    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
259        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
260    else
261        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
262    fi
263    for included_item in $included_list ; do
264        if [ ! -e "$included_item" ] ; then
265            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
266            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
267            for ii in $sss ; do
268                [ -e "$ii" ] && AddKeyboardMappingFile $ii
269            done
270        else
271            AddKeyboardMappingFile $included_item
272        fi
273    done
274}
275
276
277CopyDependenciesToDirectory() {
278    local outdir incoming counter d found tdir
279    outdir=$1
280    mkdir -p $outdir
281    incoming=`ReadLine`
282    counter=0
283    while [ "$incoming" != "" ] ; do
284        # Non absolute file names should not arrive till here => skipped
285        if [ `echo "$incoming" | cut -c1` != '/' ]; then
286            LogAll "WARNING: Unable to handle $incoming"
287            incoming=`ReadLine`
288            continue
289        fi
290        # no parent directory of incoming should be a link, copy is not possible in that case
291        d=`dirname "$incoming"`
292        found="false"
293        while [ $d != "/" -a $found = "false" ]; do
294            [ -h "$d" ] && found="true"
295            d=`dirname "$d"`
296        done
297        if [ -d "$incoming" -a ! -h "$incoming" ]; then
298            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
299        elif [ -e "$incoming" ] && [ $found = "false" ]; then
300            if [ ! -h "$incoming" ]; then
301                tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
302            else
303                tdir=`dirname "$incoming"`
304                if [ ! -e "$outdir/$tdir" ]; then
305                    mkdir -p "$outdir/$tdir"
306                fi
307                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
308            fi
309            # Only uncompress modules if not using udevd
310            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
311                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
312            fi
313            [ -x "$outdir" ] && StripExecutable $outdir
314            counter=$(($counter+1))
315            LogProgress $counter $2
316        fi
317        incoming=`ReadLine`
318    done
319}
320
321
322CountItemsIn() {
323    local r
324    r=0
325    for q in $1 ; do
326        r=$(($r+1))
327    done
328    echo $r
329}
330
331
332DropOptimizedLibraries() {
333    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
334    filelist=$1
335    outdir=$2
336
337    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
338    if [ "$list_of_optimized_libraries" = "" ] ; then
339        return 0
340    fi
341    echo -en "Dropping i686-optimized libraries if appropriate"
342    for optimized_lib_name in $list_of_optimized_libraries ; do
343        echo -en "."
344        reason=""
345        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
346        echo "$vanilla_lib_name" >> $filelist
347        LogFile "INFO: Adding $vanilla_lib_name to filelist"
348        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
349        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
350
351        # This may return multiple files
352        for resolved in `mr-read-all-link $vanilla_lib_name`; do
353            LogFile "INFO: Adding as deps $resolved to filelist"
354            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
355            if [ "$vanilla_resolved_name" != "$resolved" ]; then
356                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
357                rmdir $outdir$resolved > /dev/null 2> /dev/null
358                ln -sf $vanilla_resolved_name $outdir$resolved
359                LogFile "INFO: Excluding deps $resolved" 
360                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
361                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
362                echo "$vanilla_resolved_name" >> $filelist.tmp
363                mv -f $filelist.tmp $filelist
364            fi
365        done
366    done
367    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
368    mv -f $filelist.tmp $filelist
369    echo -e "$DONE"
370}
371
372
373FindAndAddUserKeyboardMappingFile() {
374    local r res mapfile mappath included_item included_list keyfile mp locale
375    LogAll "INFO: Analyzing your keyboard's configuration."
376    KEYDIR=/usr/lib/kbd
377    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
378    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
379    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
380    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
381    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
382    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
383    if [ ! -e "$KEYDIR" ] ; then
384        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
385        return 0
386    fi
387    if [ -e "/etc/sysconfig/keyboard" ] ; then
388        LogFile "INFO: Red Hat-style config detected."
389        keyfile=/etc/sysconfig/keyboard
390    elif [ -e "/etc/vconsole.conf" ] ; then
391        LogFile "INFO: New Fedora style config detected."
392        keyfile=/etc/vconsole.conf
393    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
394        LogFile "INFO: Slackware-style config detected."
395        keyfile=/etc/rc.d/rc.keymap
396    elif [ -e "/etc/rc.config" ] ; then
397        LogFile "INFO: Debian-style config detected."
398        keyfile=/etc/rc.config
399    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
400        LogFile "INFO: Debian-style config detected."
401        mkdir -p $bigdir/tmp
402        echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
403        KBDEPTH=0
404        mkdir -p $bigdir/etc/console
405        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
406        echo ""
407        echo -e "$DONE"
408        return 0
409    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
410        LogFile "INFO: Ubuntu-style config detected."
411        mkdir -p $bigdir/tmp
412        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
413            kbdfile="/etc/console-setup/boottime.kmap.gz"
414        else
415            kbdfile="/etc/console-setup/cached.kmap.gz"
416        fi
417        echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
418        KBDEPTH=0
419        mkdir -p $bigdir/etc/console-setup
420        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
421        echo ""
422        echo -e "$DONE"
423        return 0
424    elif [ -e "/etc/rc.conf" ] ; then
425        LogFile "INFO: ArchLinux config detected."
426        keyfile=/etc/rc.conf
427    elif [ -e "/etc/conf.d/keymaps" ] ; then
428        LogFile "INFO: Gentoo-style config detected."
429        keyfile=/etc/conf.d/keymaps
430    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
431        LogFile "INFO: X11-style config detected."
432        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
433    else
434        LogFile "Searching for rc.config ..."
435        keyfile=`find /etc -name rc.config | head -n1`
436        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
437            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
438            return
439        else
440            LogFile "INFO: Found $keyfile"
441        fi
442    fi
443    if [ ! -e "$KEYDIR/keymaps" ] ; then
444        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
445        return
446    fi
447    LogFile "INFO: keyfile=$keyfile"
448    # For SLES we need to remove the .map.gz extension Cf #614
449    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
450    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
451    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo, ArchLinux & New fedora
452    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
453    LogFile "INFO: locale=$locale"
454    #
455    # Process the keymaps dir once for all
456    # AddKeyboardMappingFile will use it recursively
457    #
458    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
459    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
460    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
461    # If we have multiple keymaps then log it !!
462    echo "$mp" | grep -q " " >> $LOGFILE
463    if [ $? -eq 0 ]; then
464        LogAll "WARNING: Multiple keymaps found: $mp"
465        LogFile "INFO: The following one will be used"
466    fi
467    for i in $mp ; do
468        mappath=$i
469        [ -e "$i" ] && [ ! -d "$i" ] && break
470    done
471    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
472        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
473    fi
474    LogFile "INFO: mappath = $mappath"
475    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
476        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
477        return
478    fi
479    LogAll "INFO: Adding the following keyboard mapping tables: "
480    mkdir -p $bigdir/tmp
481    echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
482    KBDEPTH=0
483    AddKeyboardMappingFile $mappath
484    echo ""
485    echo -e "$DONE"
486    rm -f $MINDI_TMP/keymaps.find
487    return 0
488}
489
490
491FindLdlinux32Binary() {
492    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
493    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
494    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
495    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
496    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
497    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
498    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
499    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
500    if [ ! -e "$LDLINUXC32" ]; then 
501        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
502        LDLINUXC32=/tmp/idoesnthopefullyexist
503    else
504        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
505    fi
506}
507
508
509FindMboot32Binary() {
510    MBOOTC32=/usr/lib/syslinux/mboot.c32
511    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
512    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
513    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
514    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
515    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
516    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
517    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
518    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
519    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
520}
521
522FindIsolinuxBinary() {
523    ISOLINUX=/usr/lib/isolinux.bin
524    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
525    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
526    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
527    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
528    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
529    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
530    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
531    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
532    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
533}
534
535
536GenerateGiantDependencyList() {
537    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
538
539    echo -en "Analyzing dependency requirements"
540    outfile=$1
541    tempfile=$MINDI_TMP/$$.txt
542    incoming=`ReadLine`
543
544    > $tempfile
545    progress=0
546    res=0
547    noof_lines=$2
548    while [ "$incoming" != "" ] ; do
549        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
550            incoming=`ReadLine`
551            continue
552        fi
553        if [ "$incoming" = "LVMFILES:" ] ; then
554            break
555        fi
556        filelist=`GenerateListForFile "$incoming"`
557        r=$?
558        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
559        res=$(($res+$r))
560#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
561        for fname in $filelist ; do
562                [ "$fname" != "" ] && echo "$fname" >> $tempfile
563        done
564        progress=$(($progress+1))
565        LogProgress $progress $noof_lines
566        incoming=`ReadLine`
567    done
568    if  [ "$incoming" = "LVMFILES:" ] ; then
569        incoming=`ReadLine`
570        lvmversion=""
571        while [ "$incoming" != "" ] ; do
572            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
573                incoming=`ReadLine`
574                continue
575            fi
576            filelist=`GenerateListForFile "$incoming"`
577            for tool in $filelist ; do
578                lvmresolved=`readlink -f $tool`
579                if [ "$tool" = "$lvmresolved" ]; then
580                    echo "$tool" >> $tempfile
581                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
582                    if [ "$lvmversion" = "" ] ; then
583                        lvmversion=`$lvmresolved`
584                        echo "$lvmresolved" >> $tempfile
585                    fi
586                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
587                    if [ "$lvmversion" = "200" ]; then
588                        # pvdata and lvmcreate_initrd don't exist in LVM2
589                        case "$toolstripped" in
590                        "pvdata")
591                            continue
592                            ;;
593                        "lvmcreate_initrd")
594                            continue
595                            ;;
596                        esac
597                    fi
598                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
599                    if [ -e "$toolpath" ] ; then
600                        echo "$toolpath" >> $tempfile
601                        echo "$tool" >> $tempfile
602                    else
603                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
604                    fi
605                    if [ -e "$toolpath" ] ; then
606                        echo "$toolpath" >> $tempfile
607                        echo "$tool" >> $tempfile
608                    else
609                        echo "Where are your LVM-Tools? Couldn't find $tool"
610                    fi
611                else
612                    echo "$tool" >> $tempfile
613                fi
614            done
615            progress=$(($progress+1))
616            LogProgress $progress $noof_lines
617            incoming=`ReadLine`
618        done
619    fi
620    echo -en "$DONE\nMaking complete dependency list"
621
622    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
623    mv -f $tempfile.new $tempfile
624    > $outfile.pre
625    progress=0
626    noof_lines=`cat $tempfile | wc -l`
627    LogFile "---------------------------------"
628    LogFile "List of dependencies:             "
629    LogFile "---------------------------------"
630    for fname in `cat $tempfile` ; do
631        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
632        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
633        progress=$(($progress+1))
634        LogProgress $progress $noof_lines
635    done
636    if [ _"$MONDO_SHARE" != _"" ]; then
637        mkdir -p $bigdir/tmp
638        mkdir -p $bigdir/usr/bin
639        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
640            LogAll "\nINFO: Incorporating post-nuke tarball"
641            old_pwd=`pwd`
642            cd "$bigdir"
643            tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
644            cd "$old_pwd"
645        fi
646        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
647            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
648        else
649            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
650            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
651            LogIt "       If Mindi was called by Mondo then send me a bug report."
652            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
653            LogIt "       Finally, run Mindi again."
654            Die "Odd."
655        fi
656        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
657        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
658            LogAll "\nINFO: Incorporating Network-related settings"
659            for r in NETFS-* ; do
660                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
661                LogFile "INFO: Copying $r to ramdisk"
662            done
663        fi
664    fi
665    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
666    rm -f $tempfile $outfile.pre
667    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
668    return $res
669}
670
671
672GenerateListForFile() {
673    local files_found loc fname incoming i res
674    incoming="$1"
675    files_found=""
676    res=0
677
678    for fname in $incoming ; do
679        files_found="$files_found `LocateFile $fname`"
680    done
681
682    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
683}
684
685
686# Returns all disk devices which are part of a raid array
687GetAllRaidMembers() {
688    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
689}
690
691
692GetFileSizeList() {
693    local i
694    for i in `find $1 -type d -o -print` ; do
695        du -sk $i
696    done
697}
698
699
700# Check kernel filesystem capabilites for accessing initrd image
701# Could be ext2 FS (old mode) or initramfs (new mode)
702#
703# Interface definition:
704# param #1: absolute path to kernel image
705GetInitrdFilesystemToUse() {
706
707    # interface test: make sure we have one parameter
708    if [ $# -ne 1 ]; then
709        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
710    fi
711
712    # interface parameters
713    local lvKernelImage=$1
714
715    # local constants (filesystem magic strings)
716    local lcMagicCramfs="<3>cramfs: wrong magic"
717    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
718    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
719    local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|<6>Trying to unpack rootfs image as initramfs"
720
721    # local variables
722    local lvOffset
723    local lvScanRes
724    local lvUseFilesystem
725
726    # say where we are.
727    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
728
729    # verify that file exists
730    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
731
732    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
733    file $lvKernelImage 2>&1 | grep -q gzip
734    if [ $? -eq 0 ]; then
735        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
736        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
737    else
738        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
739        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
740        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
741        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
742        if [ $lvOffset -eq 0 ]; then
743            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
744            lvScanRes=$lcMagicInitfs
745        else
746            lvOffset=`expr $lvOffset / 2`
747            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
748            # scan again  kernel image
749            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
750        fi
751    fi
752
753    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
754    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
755        lvUseFilesystem="ext2fs"
756    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
757        lvUseFilesystem="ext3fs"
758    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
759        lvUseFilesystem="initramfs"
760    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
761        lvUseFilesystem="cramfs"
762    else
763        # In that case, we are most probably after 2.6.30 and use the supported initramfs
764        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
765        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
766        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
767        lvUseFilesystem="initramfs"
768    fi
769
770    # say what we are using
771    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
772
773    # return file system to use
774    echo "$lvUseFilesystem"
775
776}
777
778# Searches members of raid device
779# $1: raid device (/dev/md...)
780GetRaidDevMembers() {
781    if [ ! -f /etc/raidtab ]; then 
782        return
783    fi
784    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
785}
786
787
788ListAllPartitions() {
789    local res currline partition all_partitions ap_orig remaining i j
790
791    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
792    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
793    if [ -e "/vmfs/volumes" ]; then
794        # For VMWare ESX 3 get the device names of these volumes
795        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
796    fi
797    return
798}
799
800
801ListImagesForUser() {
802    local path fname
803    path=$MINDI_CACHE
804    echo -en "In the directory '$path' you will find the images:-\n"
805    for fname in `ls $path | grep -F mindi-` ; do
806        printf "%19s " $fname
807    done
808    echo " "
809}
810
811
812ListKernelModulePaths() {
813    local module_list module fname r kern
814    module_list="$MODULES"
815    # Remove unwanted modules from list
816    for i in $DENY_MODS; do
817        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
818    done
819###
820### Sq-Modification ... Use kernelname for module search path if specified
821###
822    if [ "${kernelname}" != "" ]
823    then
824        kern=${kernelname}
825    else
826        kern="$KERVERRUN"
827    fi
828    export KERVER=$kern
829###
830### Sq-Mod End
831###
832    # Get rid of duplicates
833    for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do
834        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
835        if [ -z "$r" ]; then
836            if [ "`echo "$MODULES" | grep -w $module`" ]; then
837                r="[live module file not found]"
838            else
839                r="[extra module file not found]"
840            fi
841        else
842            [ -f "$r" ] && echo "$r"
843        fi
844        LogFile "INFO: module $module --> $r"
845    done
846    find /lib/modules/$kern/modules.* -type f 2> /dev/null
847}
848
849#
850# Critical function which computes all dependencies (dyn. lib.)
851# for a list of binaries
852#
853LocateDeps() {
854    local incoming fname deps
855    incoming="$*"
856    deps=""
857
858    for fname in $incoming ; do
859        if [ ! -e "$fname" ] ; then
860            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
861            if echo $fname | grep lvm &> /dev/null ; then
862                LogFile "          This warning only affects you if you are using LVM."
863                if echo "$MODULES" | grep lvm &> /dev/null ; then
864                    LogFile "          I think you are, so please take heed!"
865                else
866                    LogFile "          I don't think you are, so don't worry about it."
867                fi
868            fi
869        else
870            deps="$deps $fname" 
871        fi
872    done
873    mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
874}
875
876
877LocateFile() {
878    local i j path fname_to_find location output resolved tmp stub cache_id loclist
879    fname_to_find="$1"
880    # It's an absolute path
881    j=`echo "$fname_to_find" | cut -c1`
882    if [ _"$j" = _"/" ]; then
883        dn=`dirname $fname_to_find`
884        # We suppose that the link is already included, just add the new file
885        if [ -h "$dn" ]; then
886            newdn=`readlink -f $dn`
887            bn=`basename $fname_to_find`
888            output="$newdn/$bn"
889        else
890            output="$fname_to_find"
891        fi
892        if [ -h "$output" ] ; then
893            output="`mr-read-all-link $output` $output"
894        fi
895        echo "$output"
896        return 0
897    fi
898    # It's not an absolute path
899    output=""
900    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
901    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
902        [ -h "$path" ] && continue
903        [ ! -e "$path/$fname_to_find" ] && continue
904        output="$path/$fname_to_find $output"
905        if [ -h "$path/$fname_to_find" ] ; then
906            output="`mr-read-all-link $path/$fname_to_find` $output"
907        fi
908    done
909    if [ "$output" = "" ] ; then
910        return 1
911    fi
912    echo "$output"
913    return 0
914}
915
916LogProgress() {
917    local i progress modres noof_lines title
918 
919    progress=$1
920    noof_lines=$2
921    title=$3
922
923    i=$(($progress*100))
924    if [ $noof_lines -ne 0 ]; then
925        i=$(($i/$noof_lines))
926    else
927        i=0
928    fi
929
930    if [ _"$MONDO_SHARE" != _"" ]; then 
931        echo "$title        $i%"
932    else
933        echo -en "\r\t\t\t\t\t\t\t\t"
934        echo -en "$i"
935        echo -en "%"
936        modres=$(($progress%4))
937        [ "$modres" -eq "0" ] && echo -en "\t/"
938        [ "$modres" -eq "1" ] && echo -en "\t-"
939        [ "$modres" -eq "2" ] && echo -en "\t\\"
940        [ "$modres" -eq "3" ] && echo -en "\t|"
941    fi
942}
943
944# Called by TurnTgzIntoRdz, to make /tmp/$MRCFG
945MakeMondoConfigFile() {
946    local outfile use_lzo use_comp use_star
947    outfile=$1
948    > $outfile
949    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
950    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
951    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
952    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
953    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
954    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
955    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
956    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
957    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
958    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
959    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
960    echo "use-lzo $use_lzo" >> $outfile
961    echo "use-gzip $use_gzip" >> $outfile
962    echo "use-star $use_star" >> $outfile
963    echo "use-lzma $use_lzma" >> $outfile
964    echo "use-comp $use_comp" >> $outfile
965    echo "datestamp `date`" >> $outfile
966    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
967    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
968    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
969    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
970    AddFileToCfgIfExists $MINDI_TMP/ISO-DIR           iso-dir           $outfile
971    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
972    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
973    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver    $outfile
974    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
975    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
976    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
977    AddFileToCfgIfExists $MINDI_TMP/ACL               acl               $outfile
978    AddFileToCfgIfExists $MINDI_TMP/XATTR             xattr             $outfile
979    AddFileToCfgIfExists $MINDI_TMP/OBDR              obdr              $outfile
980
981    # Deal with network configuration in a portable way
982    if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
983        mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
984    fi
985}
986
987# Get PV's for an LV
988GetPVsForLV() {
989  if [ -n "$1" ]; then
990    vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
991    if [ -z "$vg" ]; then
992      return
993    fi
994    $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
995  fi
996}
997
998
999MakeMountlist() {
1000    local mountlist all_partitions current_partition \
1001partition_size partition_format outstring partition_number \
1002partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1003absolute_partition old_partition_fmt current_lvolume uname skip
1004
1005    LogFile "------------------------------------"
1006    LogFile "Your raw fstab file looks like this:"
1007    LogFile "------------------------------------"
1008    cat $MY_FSTAB >> $LOGFILE
1009    LogAll "-----------------------------------"
1010    LogAll "Your mountlist will look like this:"
1011    LogAll "-----------------------------------"
1012
1013# mountlist(OUT)
1014    mountlist=$1
1015
1016# NB: partition = device
1017# NB: mountpt = where the device is mounted
1018
1019    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1020
1021    [ "$mountlist" != "" ] && rm -Rf $mountlist
1022    > $mountlist
1023    all_partitions=""
1024   
1025    if [ $LVM != "false" ]; then
1026        LogAll "INFO: Analyzing LVM..."
1027        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1028        if [ $? -ne 0 ]; then
1029            LVM="false"
1030        fi
1031        # Excluded LVs and GVs are not reported here
1032        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1033    fi
1034    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1035    for i in $IMAGE_DEVS ; do
1036        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1037    done
1038    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1039    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1040    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1041    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1042    for c_p in $all_partitions ; do
1043        # Skip fd/cd devices, network FS, cifs
1044        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1045        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1046        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1047            current_partition=`readlink -f $c_p`
1048            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1049                current_partition="$c_p"
1050            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1051                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1052                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1053            fi
1054            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1055        else
1056            current_partition="$c_p"
1057        fi
1058        [ "$c_p" = "none" ] && continue
1059        redhat_label=""
1060        label=""
1061        uuid=""
1062        absolute_partition=`readlink -f $c_p`
1063        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1064
1065        # set default in case we dont't find it
1066        str_to_find_fmt_with=$current_partition
1067
1068        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1069        # current_partition contains only first column of /etc/fstab
1070        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1071            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1072            actual_dev=""
1073
1074            # 1st try, findfs - the RHEL way of finding labels and their partitions
1075            if [ -x "/sbin/findfs" ]; then
1076                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1077            fi
1078   
1079            # 2nd try : blkid, the good way for all LABEL except swap
1080            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1081                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1082                # For LVM FS it will give a /dev/dm-# which should then be converted
1083                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1084                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1085                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1086                    for dev in `ls /dev/mapper/*`; do
1087                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1088                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1089                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1090                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1091                            break
1092                        fi
1093                    done
1094                fi
1095            fi
1096   
1097            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1098            # For LVM gives a /dev/mapper entry
1099            if [ "x$actual_dev" = "x" ]; then
1100                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1101            fi
1102   
1103            # 4th try, with vol_id
1104            # SWAP only
1105            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1106                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1107                for dev_swap in $list_swaps ; do
1108                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1109                    if [ "x$dev_exists" != "x" ]; then
1110                        actual_dev=$dev_swap
1111                        break;
1112                    fi
1113                done
1114            fi
1115
1116            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1117            # LABEL=SW-cciss/c0d0p3 (RDP)
1118            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1119            # SWAP only
1120            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1121                    skip=""
1122                    uname=$KERVERRUN
1123                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1124                    # 2.6.12 needs 16 (FC3)
1125                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1126                    # 2.6.19 and upper needs 1052
1127                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1128                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1129                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1130                    if [ $skip = "" ]; then
1131                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1132                    fi
1133                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1134                    do
1135                        # Location of the swap label for kernel 2.6
1136                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1137                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1138                            actual_dev=$try_dev
1139                        fi
1140                    done
1141            fi
1142
1143            # Check if one of all those tries has known success
1144            if [ "x$actual_dev" != "x" ]; then
1145                current_partition=$actual_dev
1146            else
1147                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1148            fi
1149        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1150        # current_partition contains only first column of /etc/fstab
1151        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1152            uuid=`echo "$current_partition" | cut -d'=' -f2`
1153            actual_dev=""
1154
1155            # 1st try, findfs - the RHEL way of finding labels and their partitions
1156            if [ -x "/sbin/findfs" ]; then
1157                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1158            fi
1159   
1160            # 2nd try : blkid, the good way for all UUID except swap
1161            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1162                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1163                # For LVM FS it will give a /dev/dm-# which should then be converted
1164                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1165                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1166                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1167                    for dev in `ls /dev/mapper/*`; do
1168                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1169                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1170                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1171                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1172                            break
1173                        fi
1174                    done
1175                fi
1176            fi
1177   
1178            # 3th try, with vol_id
1179            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1180                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1181                for dev in $list_dev ; do
1182                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1183                    if [ "x$dev_exists" != "x" ]; then
1184                        actual_dev=$dev
1185                        break;
1186                    fi
1187                done
1188            fi
1189
1190            # 4th try, with dumpuuid (VMWare only ?) for swap
1191            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1192                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1193                for dev in $list_dev ; do
1194                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1195                    if [ "x$dev_exists" != "x" ]; then
1196                        actual_dev=$dev
1197                        break;
1198                    fi
1199                done
1200            fi
1201
1202            # Check if one of all those tries has known success
1203            if [ "x$actual_dev" != "x" ]; then
1204                current_partition=$actual_dev
1205            else
1206                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1207            fi
1208        else
1209            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1210            # they use symlinks in fstab unrelated to what is shown in mount !
1211            if [ _"$partition_mountpt" = _"" ]; then
1212                # set default in case we dont't find it
1213                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1214                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1215                            str_to_find_fmt_with=$tmpp
1216                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1217                            break;
1218                        fi
1219                done
1220            fi
1221        fi
1222
1223        # Detects noauto partitions not mounted and exclude them
1224        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1225        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1226                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1227            continue
1228        fi
1229        # Detects bind partitions and exclude them
1230        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1231                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1232            continue
1233        fi
1234
1235        # Look for devices which have to be excluded
1236        skip=0
1237        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1238            l=""
1239            list_of_devices="`mr-read-all-link $current_partition`"
1240            for d in $list_of_devices; do
1241                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1242            done
1243
1244            # Remove PVs from LVs excluded
1245            l="$l `GetPVsForLV $current_partition`"
1246
1247            # We want a single unique list
1248            list_of_devices="`echo $l | sort -u`"
1249
1250            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1251                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1252                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1253                    skip=1
1254                    continue
1255                fi
1256            done
1257        fi
1258        if [ $skip -eq 1 ]; then
1259            continue
1260        fi
1261
1262        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1263        # Detects iso9660 ISO images and exclude them
1264        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1265                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1266            continue
1267        fi
1268        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1269        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1270        # the former is then a link to the latter, so we test whether
1271        # $current_partition is actually such a link or not and set
1272        # $current_lvolume accordingly. On Debian you may find more than one answer
1273        # so we remove the one corresponding to /dev/.static
1274        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1275        # principle is the same and we need to find the link to it as well.
1276        # Note that $current_lvolume may well be an
1277        # ordinary device. It is just to make sure that we feed the right value
1278        # into any of the LVM tools if possible.
1279
1280        current_lvolume="$current_partition"
1281        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1282            # .static dir are a Debian specificity
1283            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1284            echo $current_lvolume | grep -q ' '
1285            if [ $? -eq 0 ]; then
1286                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1287            fi
1288            # if it's not found, it may well be a real device such as a multipath one
1289            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1290            if [ _"$current_lvolume" = _"" ]; then
1291                current_lvolume="$current_partition"
1292            fi
1293        fi
1294        #
1295        # End of LVM device style variation code (other than $current_lvolume).
1296
1297        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1298            # Size computed via LVM not directly
1299            partition_size="lvm"
1300        else
1301            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1302            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1303            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1304                # Skip swap files
1305                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1306                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1307                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1308                [ "$partition_format" != "swap" ] && partition_format="swap"
1309                if [ "$partition_size" = "" ] ; then
1310                    totalsize=0
1311                    items=0
1312                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1313                        totalsize=$(($totalsize+$i))
1314                        items=$(($items+1))
1315                    done
1316                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1317                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1318                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1319                fi
1320            else
1321                partition_size=`SizeOfPartition $current_partition`
1322            fi
1323        fi
1324        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1325        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1326        if [ "$partition_mountpt" = "" ] ; then
1327            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1328                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1329                    partition_mountpt="raid"
1330                    partition_format="raid"
1331                else
1332                    partition_mountpt="lvm"
1333                    partition_format="lvm"
1334                fi
1335            fi
1336        fi
1337        psz=$partition_size
1338        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1339        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1340        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1341            partition_mountpt="image"
1342            old_partition_fmt=$partition_format
1343            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1344            partition_size=$(($partition_size+1)); # just in case
1345            if [ "$partition_format" = "Linux" ] ; then
1346                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1347                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1348                partition_format=$old_partition_fmt
1349            fi
1350        fi
1351
1352        if [ ! "$partition_mountpt" ] ; then
1353            LogFile "------- $FDISK -l $qq log ------------"
1354            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1355                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1356                [ "$partition_format" ] && break
1357            done
1358            LogFile "------- $FDISK log end ------------"
1359            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1360                partition_format="compaq"
1361            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1362                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1363                continue
1364            fi
1365        fi
1366        if [ "$redhat_label" ]; then
1367            label="$redhat_label"
1368        elif [ "$uuid" ]; then
1369            label="$uuid"
1370        fi
1371        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1372        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1373        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1374        if [ "$current_partition" = "" ] ; then
1375            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1376        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1377            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1378                partition_mountpt=raid
1379                partition_format=raid
1380                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1381                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1382            else
1383                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1384            fi
1385        elif [ "$partition_format" = "" ] ; then
1386            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1387        elif [ "$partition_size" = "" ] ; then
1388            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1389        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1390            continue
1391        else
1392            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1393                LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1394                partition_format="vfat"
1395            fi
1396            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1397            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1398        fi
1399    done
1400    LogAll "-----------------------------------" 
1401}
1402
1403CheckMountlist() {
1404    local file=$1
1405    # Coherency verification
1406    ML01=`cat $file | wc -l`
1407    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1408    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1409    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1410    if [ "$ML01" -ne "$ML1" ]; then
1411        LogFile "--------------------------------------------"
1412        LogAll "WARNING: Duplicate device entry in mountlist"
1413        LogFile "--------------------------------------------"
1414    fi
1415    if [ "$ML02" -ne "$ML2" ]; then
1416        LogFile "--------------------------------------------"
1417        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1418        LogFile "------------------------------------------------"
1419    fi
1420}
1421
1422OfferToMakeBootableISO() {
1423    local i old_pwd
1424    if [ -z "$ISO_CMD" ]; then
1425        LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1426        return
1427    fi
1428    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1429        echo -en "Shall I make a bootable CD image? (y/[n]) "
1430        read i
1431        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1432    fi
1433    rm -Rf $MINDI_TMP/iso
1434    mkdir -p $MINDI_TMP/iso/{images,archives}
1435    LogFile "INFO: mindi_lib = $MINDI_LIB"
1436    cp -f $MINDI_CACHE/{*.gz,*.img} $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1437    for i in memdisk memtest.bin memtest.img ; do
1438        j=$MINDI_LIB/$i
1439        k=$MINDI_TMP/iso
1440        if [ -e "$j" ] ; then
1441            LogAll "INFO: Copying $j to $k"
1442            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1443            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1444            if [ _"$MONDO_SHARE" != _"" ]; then 
1445                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1446            fi
1447        fi
1448    done
1449    MakeMessageFile $MINDI_TMP/iso | cut -c1-80 > $MINDI_TMP/iso/message.txt
1450    if [ $KERNEL_IS_XEN = "yes" ]; then
1451        FindMboot32Binary
1452        cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1453        cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1454    fi
1455    # Useful for syslinux 5.x
1456    FindLdlinux32Binary
1457    if [ -e $LDLINUXC32 ]; then
1458        cp $LDLINUXC32 $MINDI_TMP/iso/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to mindi tmp ($MINDI_TMP/iso/ldlinux.c32). Did you run out of disk space?"
1459    fi
1460    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1461    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1462
1463    if [ _"$MONDO_SHARE" != _"" ]; then 
1464        if [ $KERNEL_IS_XEN = "yes" ]; then
1465            cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MONDO_ROOT/xen.gz). Did you run out of disk space?"
1466            cp $MBOOTC32 $MONDO_ROOT/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MONDO_ROOT/mboot.c32). Did you run out of disk space?"
1467        fi
1468        if [ -e $LDLINUXC32 ]; then
1469            cp $LDLINUXC32 $MONDO_ROOT/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to $MONDO_ROOT/ldlinux.c32. Did you run out of disk space?"
1470        fi
1471        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1472        cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1473    fi
1474    MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1475    if [ "$ARCH" != "ia64" ] ; then
1476        cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1477    fi
1478    old_pwd=`pwd`
1479    cd "$MINDI_TMP/iso"
1480    if [ "$ARCH" != "ia64" ] ; then
1481        if [ _"$MONDO_SHARE" != _"" ]; then 
1482            cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1483            if [ -e $MINDI_TMP/iso/ldlinux.c32 ]; then
1484                cp $MINDI_TMP/iso/ldlinux.c32 $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy ldlinux.c32 (from $MINDI_TMP/iso/$LDLINUXC32) to $MONDO_ROOT. Did you run out of disk space?"
1485            fi
1486            if [ $KERNEL_IS_XEN = "yes" ]; then
1487                cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1488            fi
1489            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1490        fi
1491        $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1492    else
1493        $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1494    fi
1495    if [ "$?" -ne "0" ] ; then
1496        LogFile "----------- $ISO_CMD's errors --------------"
1497        LogAll "$ISO_CMD returned the following errors:"
1498        cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1499        LogAll "ERROR: Failed to create ISO image."
1500    else
1501        LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1502    fi
1503    rm -f $MINDI_TMP/mkisofs.log
1504    cd "$old_pwd"
1505}
1506
1507
1508OfferToMakeBootableUSB() {
1509    local i
1510    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1511        echo -n "Shall I make a bootable USB device ? (y/[n]) "
1512        read i
1513        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1514        if [ "$USBDEVICE" = "" ]; then
1515            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1516            read dev
1517            USBDEVICE=$dev
1518        fi
1519        echo "WARNING: This will erase all content on $USBDEVICE"
1520        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1521        read i
1522        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1523    fi
1524    rm -Rf $MINDI_TMP/usb
1525    mkdir -p $MINDI_TMP/usb
1526    USBPART="${USBDEVICE}1"
1527
1528    echo -en "Transforming $USBDEVICE in a Bootable device " 
1529    echo -en "."
1530    LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1531    LogFile "INFO: Checking $USBDEVICE"
1532    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1533    if [ $? -ne 0 ]; then
1534        LogAll "ERROR: Unable to access $USBDEVICE"
1535        LogAll "       Make sure your USB device is plugged in"
1536        MindiExit -1
1537    fi
1538    echo -en "."
1539    # Some distro do auto mount at that point (Ubuntu)
1540    LogFile "INFO: Unmounting $USBPART just in case"
1541    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1542    # If your key has no MBR it may cause an issue
1543    # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1544    if [ -r $MBRFILE ]; then
1545        LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1546        dd if=$MBRFILE of=$USBDEVICE
1547    else
1548        LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1549        LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1550    fi
1551    LogFile "INFO: Preparing $USBDEVICE"
1552    cat > $MINDI_TMP/fdisk.txt << EOF
1553d
1554d
1555d
1556d
1557n
1558p
15591
1560
1561
1562t
1563b
1564a
15651
1566w
1567EOF
1568    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1569    if [ $? -ne 0 ]; then
1570        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1571        LogAll "       Make sure your USB device is plugged in"
1572        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1573        MindiExit -1
1574    fi
1575    LogFile "fdisk build file"
1576    LogFile "----------------"
1577    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1578    LogFile "----------------"
1579    rm -f $MINDI_TMP/fdisk.txt
1580    LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1581    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1582    echo -en "."
1583    # Calling kpartx in case devices were not created
1584    if [ -x "/sbin/kpartx" ]; then
1585        /sbin/kpartx -a $USBDEVICE
1586    fi
1587    # Some distro do auto mount at that point (Ubuntu)
1588    LogFile "INFO: Unmounting $USBPART just in case again"
1589    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1590    echo -en "."
1591    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1592    if [ "`which dmsetup`" != "" ]; then
1593        block_id="`echo $USBPART | sed 's|/dev/||g'`"
1594        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1595            LogFile "INFO: Removing $block_id from device mapper."
1596            sleep 1
1597            dmsetup remove $block_id
1598        fi
1599    fi
1600    echo -en "."
1601    LogFile "INFO: Creating a vfat filesystem on $USBPART"
1602    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1603    if [ $? -ne 0 ]; then
1604        LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1605        LogAll "       Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1606        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1607        MindiExit -1
1608    fi
1609    echo -en "."
1610    LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1611    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1612    if [ $? -ne 0 ]; then
1613        LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1614        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1615        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1616        MindiExit -1
1617    fi
1618    echo -en "."
1619    mkdir -p $MINDI_TMP/usb/images
1620    cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1621    echo -en "."
1622    LogFile "INFO: mindi_lib = $MINDI_LIB"
1623    for i in memdisk memtest.bin memtest.img ; do
1624        j=$MINDI_LIB/$i
1625        k=$MINDI_TMP/usb
1626        if [ -e "$j" ] ; then
1627            LogIt "INFO: Copying $j to $k"
1628            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1629            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1630        fi
1631    done
1632    echo -en "."
1633    MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1634    echo -en "."
1635    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1636    echo -en "."
1637    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1638    echo -en "."
1639    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1640    echo -en "."
1641    LogAll "----------- syslinux's conf --------------"
1642    cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1643    LogAll "------------------------------------------"
1644    umount $MINDI_TMP/usb
1645    if [ "$ARCH" != "ia64" ] ; then
1646        syslinux -v 2>&1 | grep -q 4.02
1647        if [ $? -eq 0 ]; then
1648            # This buggy version of syslinux requires a call to --stupid and not -s
1649            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1650            res=$?
1651        else
1652            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1653            res=$?
1654        fi
1655        if [ $res -ne 0 ] ; then
1656            LogAll "----------- syslinux's errors --------------"
1657            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1658            LogAll "------------------------------------------"
1659            LogIt "ERROR: Failed to create USB image."
1660        else
1661            echo -e "$DONE"
1662            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1663        fi
1664        rm -f $MINDI_TMP/syslinux.log
1665    else
1666        LogAll "ERROR: No USB boot support for ia64"
1667        MindiExit -1
1668    fi
1669}
1670
1671
1672MakeMessageFile() {
1673   
1674    if [ -x "/bin/lsb_release" ]; then
1675        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1676    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1677        DESC="Arch Linux"
1678        if [ -r /var/log/pacman.log ]; then
1679            # there are no releases but we can get the last system upgrade
1680            # Output example:   Arch Linux [2011-03-03 01:39]
1681            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1682        fi
1683    elif [ -r /etc/issue.net ]; then
1684        DESC=`head -1 /etc/issue.net`
1685    elif [ -r /etc/issue ]; then
1686        DESC=`head -1 /etc/issue`
1687    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1688        # For pb >= 0.9.8
1689        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4`
1690    else
1691        DESC="Unknown desc"
1692    fi
1693    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1694    if [ _"$MONDO_SHARE" != _"" ]; then
1695        if [ "$CDRECOVERY" != "yes" ] ; then
1696            if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1697                echo -en "Press <0eenter07> for 0cnetwork restore07\n"
1698                echo -en "$BOOT_MEDIA_MESSAGE"
1699            elif [ ! "$MINDI_TMP" ] ; then
1700                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1701                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1702                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1703                fi
1704            else
1705                echo -en "$BOOT_MEDIA_MESSAGE"
1706            fi
1707        else
1708            echo -en "\
1709To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1710CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1711        fi
1712    fi
1713
1714    # Also create the other help screens
1715    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1716    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1717    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1718}
1719
1720
1721MakeBootConfFile() {
1722    local options i ooo
1723    options=""
1724    # Type of boot file (elilo or syslinux/isolinux)
1725    type=$1
1726    if [ "$type" = "elilo" ]; then
1727        sep="="
1728    else
1729        sep=" "
1730    fi
1731
1732    # Generic header for conf file
1733    if [ "$type" != "elilo" ] ; then
1734        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1735    else
1736        echo -en "prompt\n"
1737    fi
1738
1739    # Compute which default option to boot from
1740    if [ "$CDRECOVERY" = "yes" ] ; then
1741        echo -en "default${sep}RESTORE\n"
1742    # In case it's mondoarchive
1743    elif [ _"$MONDO_SHARE" != _"" ]; then
1744        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1745            echo -en "default${sep}iso\n"
1746        else
1747            echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
1748        fi
1749    else
1750        echo -en "default${sep}expert\n"
1751    fi
1752
1753    # Handle timeout
1754    if [ "$CDRECOVERY" != "yes" ] ; then
1755        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1756    else
1757        echo -en "timeout${sep}10000\n"
1758    fi
1759    echo -en "\n"
1760
1761    # prepare which labels will be generated
1762    if [ "$CDRECOVERY" = "yes" ] ; then
1763        options="RESTORE expert"
1764    else
1765        if [ _"$MONDO_SHARE" != _"" ]; then
1766            options="interactive expert compare iso nuke isonuke"
1767        else
1768            options="expert"
1769        fi
1770    fi
1771
1772    # Generate rest of conf file
1773    for i in $options ; do
1774        ooo=$i
1775        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1776        if [ "$type" = "elilo" ]; then
1777            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1778        else
1779            ps="/"
1780            if [ "$type" = "syslinux" ]; then
1781                ps=""
1782            fi
1783            if [ $KERNEL_IS_XEN = "no" ]; then
1784                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1785            else
1786                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1787            fi
1788        fi
1789        echo -en "$outstr"
1790    done
1791    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1792        if [ "$type" = "elilo" ]; then
1793            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1794            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1795        else
1796            ps="/"
1797            if [ "$type" = "syslinux" ]; then
1798                ps=""
1799            fi
1800            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1801            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1802        fi
1803    fi
1804}
1805
1806
1807PrepareBootDiskImage_LILO() {
1808    local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1809    imagesdir=$MINDI_CACHE
1810    kernelpath=$1
1811
1812    retval=0
1813
1814    old_pwd=`pwd`
1815    [ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
1816    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1817    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1818    echo -en "..."
1819    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1820    mkdir -p $mountpoint
1821    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1822    LogFile "Creating vfat filesystem on $imagefile" 
1823    mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1824    mount -t vfat -o loop $imagefile $mountpoint || LogAll "ERROR: Cannot mount (PBDI)"
1825
1826    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1827    mkdir -p $mountpoint/etc
1828    liloconf=$mountpoint/elilo.conf
1829
1830    MakeBootConfFile elilo > $liloconf
1831
1832    # Copy it so that CD-ROM menu entry is satisfied
1833    mountefi=0
1834    df -T | grep /boot/efi | grep -q vfat
1835    if [ $? -ne 0 ]; then
1836        mount /boot/efi
1837        if [ $? -ne 0 ]; then
1838            echo "You have to mount your EFI partition when using mindi"
1839            MindiExit -1
1840        fi
1841        mountefi=1
1842    fi
1843    el=`find /boot/efi -name elilo.efi`
1844    cp $el $mountpoint
1845    cp $liloconf $mountpoint
1846    if [ $mountefi -eq 1 ]; then
1847        umount /boot/efi 2>&1 > /dev/null
1848    fi
1849
1850    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
1851    cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1852    if [ "$?" -ne "0" ] ; then
1853        LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1854        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1855        LogIt "       Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1856        rm -f $MINDI_TMP/mtpt.$$
1857        LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1858        retval=$(($retval+1))
1859    fi
1860    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1861
1862    mkdir -p $mountpoint/tmp
1863    if [ -f "$MINDI_TMP/$MRCFG" ]; then
1864        cp -f $MINDI_TMP/$MRCFG $mountpoint/tmp
1865    fi
1866
1867    # copy the kernel across
1868    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1869    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1870    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1871    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1872    if [ "$?" -ne "0" ] ; then
1873        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1874        du -sk $mountpoint/* >> $LOGFILE
1875        LogFile "--- end of list of files ---"
1876        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1877        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1878        cd "$old_pwd"
1879        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1880        rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1881    #   losetup /dev/loop0 -d
1882        [ "$imagefile" != "" ] && rm -f $imagefile
1883        LogIt "ERROR: Sorry, your kernel is too big for your image"
1884        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1885        return 0
1886    fi
1887    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1888    LogFile "INFO: Free space left on image = $free_space KB"
1889    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1890    # make it bootable
1891    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1892    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1893    if [ "$KERN_DISK_MADE" ] ; then
1894        LogFile "INFO: Not running LILO. It's not that kind of disk."
1895    fi
1896
1897    cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1898    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1899    echo -en "..."
1900    rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1901    if [ "$retval" -eq "0" ] ; then
1902        echo -en "...$DONE\n"
1903        if [ "$KERN_DISK_MADE" ] ; then
1904            LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1905        fi
1906    else
1907        echo -en "...failed\n"
1908        LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1909        [ "$imagefile" != "" ] && rm -f $imagefile
1910    fi
1911    [ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
1912    return $retval
1913}
1914
1915
1916PrepareBootDiskImage_ISOLINUX() {
1917    local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage retval
1918    imagesdir=$MINDI_CACHE
1919    kernelpath=$1
1920    do_boot_root_thingy=""
1921    retval=0
1922
1923    old_pwd=`pwd`
1924    [ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
1925    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1926    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1927    echo -en "..."
1928    imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
1929    mkdir -p $mountpoint
1930    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1931    LogFile "INFO: Creating vfat filesystem on $imagefile"
1932    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1933    # syslinux should be run on a  local file (doen't work through NFS Cf: #297)
1934    syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1935
1936    # Only move it now to its final destination and use it now
1937    mv $imagefile $imagesdir
1938    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1939
1940    mount -t vfat -o loop $imagefile $mountpoint || LogIt "ERROR: Cannot mount (PBDI)"
1941
1942    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1943    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1944    MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
1945    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1946    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1947    if [ "$?" -ne "0" ] ; then
1948        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1949        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1950        LogAll "       Please unload some of your modules and try again."
1951        rm -f $MINDI_TMP/mtpt.$$
1952        LogAll "       Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
1953        LogAll "       Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1954        retval=$(($retval+1))
1955    fi
1956
1957    mkdir -p $mountpoint/tmp
1958    if [ -f "$MINDI_TMP/$MRCFG" ]; then
1959        cp -f $MINDI_TMP/$MRCFG $mountpoint/tmp
1960    fi
1961
1962    # copy the kernel across
1963    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1964    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1965    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1966         
1967    retval=0
1968    cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
1969    retval=$?
1970    if [ $KERNEL_IS_XEN = "yes" ]; then
1971        cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
1972        let retval+=$?
1973    fi
1974 
1975    if [ "$retval" -ne "0" ] ; then
1976        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1977        du -sk $mountpoint/* >> $LOGFILE
1978        LogFile "--- end of list of files ---"
1979        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1980        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1981        cd "$old_pwd"
1982        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1983        rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
1984
1985        LogIt "ERROR: Sorry, your kernel is too big for your image"
1986        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1987    fi
1988    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1989    LogFile "INFO: Free space left on image = $free_space KB"
1990    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1991
1992    # make it bootable
1993    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1994    mkdir -p $mountpoint/etc
1995    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1996    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1997    echo -en "..."
1998    rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
1999
2000    if [ "$retval" -eq "0" ] ; then
2001        echo -en "...$DONE\n"
2002        if [ "$KERN_DISK_MADE" ] ; then
2003            [ "$imagefile" != "" ] && rm -f $imagefile
2004            LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2005        fi
2006    else
2007        echo -en "...failed\n"
2008        LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2009        [ "$imagefile" != "" ] && rm -f $imagefile
2010    fi
2011    [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning nonzero"
2012    return $retval
2013}
2014
2015
2016ParseModprobeForIncludes() {
2017local MODPROBE_CONF mpincfile includes include
2018
2019MODPROBE_CONF=/etc/modprobe.conf
2020mpincfile=$1
2021touch $mpincfile
2022if [ -a $MODPROBE_CONF ]; then
2023    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2024    if [ -n "$includes" ]; then
2025        for include in $includes
2026        do
2027            if [ -a "$include" ]; then
2028                echo $include >> $mpincfile
2029            fi
2030        done
2031    fi
2032fi
2033}
2034
2035
2036PrepareDataDiskImages() {
2037    local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
2038
2039    imagesdir=$MINDI_CACHE
2040    rm -f $imagesdir/mindi.iso
2041    needlist=$MINDI_TMP/what-we-need.txt
2042    bigdir=$MINDI_TMP/bigdir
2043    mkdir -p $bigdir/usr/bin
2044    mkdir -p $bigdir/usr/sbin
2045    includefile=$MINDI_TMP/$$.includefile.txt
2046
2047    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2048    if [ -e "$DEPLIST_FILE" ]; then
2049        lfiles="$DEPLIST_FILE $lfiles"
2050    fi
2051    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2052    ParseModprobeForIncludes $includefile
2053    lines=$(($lines+`cat $includefile | wc -l`))
2054    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2055    res=$?
2056    rm -f $includefile
2057    ListKernelModulePaths >> $needlist
2058    if [ "$res" -ne "0" ] ; then
2059        Die "You have $res files present in dependency list\nbut absent from filesystem."
2060    fi
2061    mkdir -p $bigdir/tmp
2062    if [ _"$MONDO_SHARE" != _"" ]; then
2063        # BCO: no reason to have the cfg file stored twice
2064        MakeMondoConfigFile $MINDI_TMP/$MRCFG
2065        cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
2066    fi
2067
2068    # Needs to be done after the MRCFG creation
2069    FindAndAddUserKeyboardMappingFile
2070
2071    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2072    DropOptimizedLibraries $needlist $bigdir
2073    echo -en "Assembling dependency files"
2074
2075    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2076
2077    # also copy io.sys and msdos.sys, if we can find them
2078    for i in `mount | cut -d' ' -f3` ; do
2079        for j in io.sys msdos.sys ; do
2080            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2081        done
2082    done
2083
2084    # master boot record, too
2085    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2086    if [ "$i" ] ; then
2087        LogAll "INFO: Backing up $i's MBR"
2088        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2089        sleep 1
2090        sync
2091        j=$i
2092        [ -h "$j" ] && j=`readlink -f $j`
2093        LogAll "INFO: Creating /dev/boot_device ($j)"
2094        mkdir -p $bigdir/dev
2095        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2096    fi
2097
2098    old_pwd=`pwd`
2099    cd "$bigdir"
2100
2101    # Get terminfo content
2102    ti="usr/share/terminfo/l"
2103    if [ -d /$ti ]; then
2104        mkdir -p $ti
2105        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2106    fi
2107    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2108        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2109        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2110    fi
2111    if [ -d "/lib/dev-state" ]; then 
2112        cp -a /lib/dev-state ./lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2113    fi
2114    cd "$old_pwd"
2115    echo -e "$DONE"
2116    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2117    MakeMountlist $MINDI_TMP/mountlist.txt
2118    CheckMountlist $MINDI_TMP/mountlist.txt
2119    mkdir -p $bigdir/tmp
2120    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2121    if [ _"$MONDO_SHARE" != _"" ]; then
2122        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2123    fi
2124    if [ $LVM != "false" ]; then
2125        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2126        if [ "$?" -ne "0" ]; then
2127            LVM="false"
2128            rm -f $bigdir/tmp/i-want-my-lvm
2129        else
2130            LogFile "Your i-want-my-lvm file content is:"
2131            LogFile "-----------------------------------"
2132            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2133            LogFile "-----------------------------------"
2134        fi
2135    fi
2136    LogFile "Your mountlist.txt file content is:"
2137    LogFile "-----------------------------------"
2138    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2139    LogFile "-----------------------------------"
2140
2141    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2142    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2143    if [ _"$MONDO_SHARE" != _"" ]; then
2144        for q in filelist.full.gz biggielist.txt ; do
2145            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2146            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2147        done
2148    fi
2149
2150    echo -en "Tarring and zipping the data content..."
2151    size_of_all_tools=`du -sk $bigdir | cut -f1`
2152    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $imagesdir/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2153    LogFile "Size of the data content"
2154    LogFile "------------------------"
2155    du -sk $imagesdir/*gz >> $LOGFILE
2156    LogFile "------------------------"
2157    echo -e "$DONE"
2158
2159    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2160    rm -rf $bigdir
2161    rm -f $needlist
2162}
2163
2164
2165Prompt() {
2166    echo -en "$1"
2167    read line
2168}
2169
2170
2171ReadLine() {
2172    local i incoming
2173    read incoming
2174    i=0
2175    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2176        i=$(($i+1))
2177        read incoming
2178    done
2179    echo "$incoming"
2180}
2181
2182
2183SizeOfPartition() {
2184    local devpath drive res stub
2185    device=$1
2186    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2187        Die "Cannot find $device's size - is your /etc/fstab sane?"
2188    fi
2189    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2190        res=`SizeOfRaidPartition $device`
2191        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2192        echo "$res"
2193        return 0
2194    fi
2195    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2196    res=`$FDISK -s $device 2>> $LOGFILE`
2197    # end patch
2198    # take only the first in case of multiple mount (cifs, nfs, ...)
2199    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2200    [ "$res" = "" ] && res="-1"
2201    echo $res
2202    return 0
2203}
2204
2205
2206SizeOfRaidPartition() {
2207    local real_dev smallest_size silly tmp
2208
2209    silly=999999999
2210    smallest_size=$silly
2211
2212    for real_dev in `GetRaidDevMembers $1` ; do
2213        tmp=`SizeOfPartition $real_dev`
2214        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2215    done
2216
2217    if [ "$smallest_size" = "$silly" ] ; then
2218        echo "-1"
2219        return 1
2220    else
2221        echo "$smallest_size"
2222        return 0
2223    fi
2224}
2225
2226
2227StripExecutable()
2228{
2229    local tmpfile
2230
2231    tmpfile=$MINDI_TMP/stripped.$$.dat
2232    [ -d "$1" ] || [ -h "$1" ] && return
2233    cp -f $1 $tmpfile 2>> $LOGFILE
2234    strip $tmpfile 2> /dev/null
2235    if [ "$?" -eq "0" ] ; then
2236        cp -f $tmpfile $1 2>> $LOGFILE
2237        LogFile "INFO: Stripped binary $2"
2238    fi
2239    rm -f $tmpfile
2240}
2241
2242KernelVer() {
2243        local fkern_ver fname
2244
2245        fname=$1
2246        file $fname | grep -q gzip
2247        if [ "$?" -eq "0" ] ; then
2248            # Used by ia64
2249            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2250        else
2251            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2252        fi
2253        echo "$fkern_ver"
2254}
2255
2256
2257# WARNING: This function should just echo the final result !!!
2258#
2259TryToFindKernelPath() {
2260    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2261
2262    we_want_version=$KERVERRUN
2263    possible_kernels=""
2264    duff_kernels=""
2265    output=""
2266   
2267    if [ "$ARCH" = "ia64" ] ; then
2268       root="/boot/efi/efi"
2269    else
2270       root="/"
2271    fi
2272    # See if we're booted from a Xen kernel
2273    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2274    if [ -f /proc/xen/capabilities ]; then
2275        # It's a Xen kernel
2276        KERNEL_IS_XEN="yes"
2277        LogFile "INFO: It's a Xen kernel..."
2278    fi
2279
2280    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2281        [ ! -e "$fname" ] && continue
2282        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2283        fkern_ver=`KernelVer $fname`
2284        [ "$fkern_ver" = "" ] && continue
2285        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2286        [ -f "$fname" ] || continue
2287        [ -h "$fname" ] && continue
2288        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2289        file $fname | grep -q gzip
2290        if [ "$?" -eq "0" ] ; then
2291            # Used by ia64
2292            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2293                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2294                duff_kernels="$fname $duff_kernels"
2295            else
2296                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2297                possible_kernels="$fname $possible_kernels"
2298            fi
2299        else
2300            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2301                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2302                duff_kernels="$fname $duff_kernels"
2303            else
2304                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2305                possible_kernels="$fname $possible_kernels"
2306            fi
2307        fi
2308    done
2309    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2310        possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2311    fi
2312    if [ ! "$possible_kernels" ] ; then
2313        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2314        possible_kernels="$duff_kernels"
2315        if [ ! "$possible_kernels" ] ; then
2316            LogAll "INFO: Sorry, no duff kernels either"
2317        else
2318            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2319            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2320        fi
2321    fi
2322    if [ $KERNEL_IS_XEN = "yes" ]; then
2323        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2324        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2325    fi
2326    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2327    noof_kernels=`CountItemsIn "$possible_kernels"`
2328    if [ "$noof_kernels" -eq "0" ] ; then
2329        LogAll "Could not find your kernel."
2330        if [ -e "/boot/vmlinuz" ] ; then
2331            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2332            output=/boot/vmlinuz
2333        else
2334            output=""
2335        fi
2336    elif [ "$noof_kernels" -eq "1" ] ; then
2337        kp=`echo "$possible_kernels" | sed s/' '//`
2338        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2339        output="$kp"
2340    else
2341        for i in $possible_kernels ; do
2342            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2343                LogAll "INFO: OK, I used my initiative and found that "
2344                LogAll "INFO: $i is probably your kernel. "
2345                output="$i"
2346                break
2347            fi
2348        done
2349        if [ ! -n "$output" ]; then
2350            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2351                output=/boot/vmlinuz
2352                LogFile "INFO: Schlomo, this one's for you."
2353            else
2354                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2355                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2356                LogFile "INFO: $possible_kernels"
2357                output=""
2358            fi
2359        fi
2360    fi
2361    if [ $KERNEL_IS_XEN = "yes" ]; then
2362        if [ "$noof_xenkernels" -eq "0" ]; then
2363            xenkernelpath=""
2364        elif [ "$noof_xenkernels" -eq "1" ]; then
2365            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2366            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2367        else
2368            for i in $possible_xenkernels ; do
2369                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2370                    LogFile "INFO: OK, I used my initiative and found that "
2371                    LogFile "INFO: $i is probably your Xen kernel. "
2372                    xenkernelpath="$i"
2373                    break
2374                fi
2375            done
2376            if [ ! -n "$xenkernelpath" ]; then
2377                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2378                if [ ! -n "$new_possible_xenkernels" ]; then
2379                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2380                    LogFile "INFO: Using $xenkernelpath"
2381                else
2382                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2383                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2384                    LogFile "INFO: $possible_xenkernels"
2385                    output=""
2386                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2387                    LogFile "INFO: Using $xenkernelpath"
2388                fi
2389            fi
2390        fi
2391        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2392            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2393        fi
2394    fi
2395    LogAll "TryToFindKernelPath found $output"
2396    echo "$output"
2397}
2398
2399
2400TurnTgzIntoRdz() {
2401    local tgz_dir_fname rdz_fname tempfile old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path d thelink
2402
2403    tgz_dir_fname=$1
2404    rdz_fname=$2
2405    kernelsize=$3
2406    maxsize=$(($BOOT_SIZE-$kernelsize))
2407    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2408    tempfile=$MINDI_TMP/temp.rd
2409    res=0
2410    echo -en "..."
2411    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2412    echo -en "..."
2413    LogFile "INFO: Creating ext2 filesystem on $tempfile"
2414    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2415    echo -en "..."
2416    mkdir -p $mountpoint
2417    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2418    echo -en "..."
2419    old_pwd=`pwd`
2420    cd "$mountpoint"
2421
2422    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2423    for d in bin sbin lib lib64; do
2424        if [ -h "/$d" ]; then
2425            thelink=`readlink /$d`
2426            mkdir -p $mountpoint/$thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2427            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2428            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2429                rmdir $mountpoint/$d
2430            fi
2431            if [ ! -h $mountpoint/$d ]; then
2432                rm -f $mountpoint/$d 2> /dev/null
2433                (cd $mountpoint ; ln -s $thelink $d) || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2434            fi
2435        fi
2436    done
2437    LogFile "INFO: what is now in $mountpoint"
2438    ls -alR $mountpoint >> $LOGFILE
2439   
2440    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2441    for f in $tgz_dir_fname/*; do 
2442        if [ ! -r $f ]; then
2443            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2444        else
2445            cp -Rdf $f . 2>&1 >> $LOGFILE
2446        fi
2447    done
2448    (cd etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2449    ln -sf usr/sbin/init linuxrc
2450
2451    cd dev || Die "Can't cd to dev"
2452    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2453    rm -f dev-entries.tgz
2454    cd ..
2455
2456    for w in insmod.static insmod.static.old ; do
2457        s=`which $w 2> /dev/null`
2458        if [ -e "$s" ] ; then
2459            tar cf - -C / $s 2> /dev/null | tar xf -
2460        fi
2461    done
2462
2463    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2464   
2465    # Copy of files mandatory for ssh to automate mount if sshfs is used
2466    mkdir $mountpoint/.ssh $mountpoint/tmp
2467    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2468    cat > $mountpoint/tmp/myssh << EOF
2469ssh -o StrictHostKeyChecking=no $*
2470EOF
2471    chmod 755 $mountpoint/tmp/myssh
2472
2473    # Copy of files mandatory for ld.so
2474    cp -a /etc/ld.so.c* $mountpoint/etc
2475
2476    # Handle the case where busybox and mount are dynamically linked
2477    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2478    if [ $? -eq 0 ]; then
2479        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2480        rm -f bin/mount
2481    fi
2482
2483    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf & udev.conf file (which includes all busybox deps)
2484    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2485    for f in `cat $DEPLIST_DIR/minimal.conf $DEPLIST_DIR/udev.conf | grep -vE " *#.*|^#" | sort -u` ; do
2486        if [ -d $f ]; then
2487            for g in `find $f`; do 
2488                echo $g >> $MINDI_TMP/minimal.lis
2489                LocateDeps $g  >> $MINDI_TMP/minimal2.lis
2490            done
2491        else 
2492            if [ -r $f ]; then
2493                echo $f >> $MINDI_TMP/minimal.lis
2494                LocateDeps $f >> $MINDI_TMP/minimal2.lis
2495            fi
2496        fi
2497    done
2498    for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
2499        mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2500    done
2501    # Initial / are trucated by tar
2502    finallist=""
2503    # Remove directories from the list, as tar/cp will create them anyway
2504    # and it may hurt if /lib is in it as on Debian/Ubuntu
2505    # recent bash says that -d is true for a link to a dir !
2506    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2507        if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2508            finallist="$finallist $f"
2509        fi
2510    done
2511    #tar cf - $finallist 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2512    echo "cp -a -n --parents $finallist -t $mountpoint" 2>&1 >> $MINDI_TMP/$$.log
2513    cp -a -n --parents $finallist -t $mountpoint 2>> $MINDI_TMP/$$.log || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2514
2515    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2516    ln -sf /bin/bash bin/sh
2517    LogIt "INFO: Using bash as default shell"
2518    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2519
2520    # Avoids an issue on some distro (RHEL5)
2521    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2522
2523    mkdir -p $mountpoint/tmp
2524    # Management of udev (which includes modprobe in rules)
2525    ps auxww | grep -v grep | grep -qw udevd
2526    if [ $? -eq 0 ]; then
2527        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2528        LogIt "INFO: udev device manager found"
2529        tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
2530        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2531        rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2532        # Do not do it if it's a link (Ubuntu 64 bits #503)
2533        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2534            tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
2535        fi
2536        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2537            tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
2538        fi
2539        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2540            tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
2541        fi
2542        if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [  ! -h "/usr/lib/udev" ]; then
2543            tar cf - -C / /usr/lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /usr/lib/udev analysis" $MINDI_TMP/$$.log
2544        fi
2545        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ]; then
2546            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2547            lis=""
2548            # Get only the files which exist in that list
2549            # and potentially their symlink structure
2550            for i in $lis2; do
2551                if [ -h $i ]; then
2552                    j=$i
2553                    while [ -h $j ]; do
2554                        lis="$lis $j"
2555                        j=`readlink -f $j`
2556                    done
2557                    lis="$lis $j"
2558                elif [ -f $i ]; then
2559                    lis="$lis $i"
2560                fi
2561            done
2562            # And their deps
2563            LocateDeps $lis > $MINDI_TMP/udev.lis
2564            for i in $lis; do
2565                if [ "`echo $i | cut -c1`" = "/" ]; then
2566                    j=`echo $i | cut -c2-`
2567                    [ "$j" != "" ] && rm -f $j
2568                fi
2569                echo "$i" >> $MINDI_TMP/udev.lis
2570            done
2571            finallist=""
2572            # Remove directories from the list, as tar/cp will create them anyway
2573            # and it may hurt if /lib is in it as on Debian/Ubuntu
2574            # recent bash says that -d is true for a link to a dir !
2575            for f in `sort -u $MINDI_TMP/udev.lis`; do
2576                if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2577                    finallist="$finallist $f"
2578                fi
2579            done
2580            #tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2581            echo "cp -a -n --parents $finallist -t $mountpoint/" 2>&1 >> $MINDI_TMP/$$.log
2582            cp -a -n --parents $finallist -t $mountpoint/ 2>> $MINDI_TMP/$$.log  || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2583            rm -f $MINDI_TMP/udev.lis
2584        else
2585            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2586            LogAll "         mindi will use static devices which may cause problems"
2587            rm -f $mountpoint/tmp/USE-UDEV
2588        fi
2589    fi
2590
2591    # Management of potential HW info (ProLiant only at the moment)
2592    rm -rf $MINDI_CACHE/bkphw
2593    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2594    if [ -d $MINDI_CACHE/bkphw ]; then
2595        LogIt "INFO: Hardware Information found and saved ..."
2596        cp -rp $MINDI_CACHE/bkphw .
2597        if [ -f $MINDI_CACHE/tools.files ]; then
2598            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2599            LocateDeps $lis > $MINDI_TMP/tools.lis
2600            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
2601        fi
2602        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2603            mv -f $MINDI_CACHE/mindi-rsthw .
2604            chmod 755 ./mindi-rsthw
2605        fi
2606        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2607    fi
2608
2609    # Management of perl scripts delivered needed at restore time
2610    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/bin/mr-* > $MINDI_TMP/perl.lis
2611    tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
2612
2613    for w in cdrom groovy-stuff ; do
2614        mkdir -p mnt/$w
2615    done
2616
2617    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
2618
2619    echo -en "..."
2620    cd /
2621
2622    needed_modules=""
2623    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2624
2625    if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2626        # For PXE boot
2627        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2628    fi
2629    for i in $DENY_MODS; do
2630        LogFile "INFO: Removing $i from the list of modules to load"
2631        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2632    done
2633
2634    if [ "${kernelname}" != "" ]; then
2635        needed_modules_path=lib/modules/${kernelname}
2636        mkgmopt="-k ${kernelname}"
2637    else
2638        needed_modules_path=lib/modules/$KERVERRUN
2639        mkgmopt="-k $KERVERRUN"
2640    fi
2641
2642    [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n         If you're not using a modular kernel then mindi won't probably work."
2643    needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2644
2645    LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2646    cp --parents -aL $needed_modules $mountpoint/ 2>> $MINDI_TMP/$$.log || LogIt "ERROR: Unable to copy modules to $mountpoint" $MINDI_TMP/$$.log
2647
2648    # Uncompress modules if not using udev and native modprobe
2649    if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2650        for i in $needed_modules; do
2651            if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2652                gunzip -f $mountpoint/$i
2653            fi
2654            if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2655                bunzip2 -f $mountpoint/$i
2656            fi
2657            if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2658                unxz -f $mountpoint/$i
2659            fi
2660            LogFile "INFO: Uncompressing $i"
2661        done
2662    fi
2663
2664    # Also copy modules.* in case of udev so that normal modprobe works
2665    tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
2666
2667    # Copy FW in case some drivers needs it
2668    for d in "/lib" "/usr/lib"; do
2669        if [ -d "$d/firmware" -a ! -h $d ]; then
2670            cp -a "$d/firmware" "$mountpoint/$d"
2671        fi
2672    done
2673
2674    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2675    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2676        if [ -d "$d/multipath" -a ! -h $d ]; then
2677            cp -a "$d/multipath" "$mountpoint/$d"
2678        fi
2679    done
2680
2681    # Copy an additional ProLiant tool for OBDR support
2682    if [ -f $MINDI_TMP/OBDR ]; then
2683        found=0
2684        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2685            mkdir -p $mountpoint/usr/bin
2686            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2687            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2688            found=1
2689        fi
2690        if [ -x /usr/bin/sg_wr_mode ]; then
2691            mkdir -p $mountpoint/usr/bin
2692            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2693            LocateDeps $lis > $MINDI_TMP/obdr.lis
2694            (cd $mountpoint ; tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $MINDI_TMP/$$.log)
2695            LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2696            found=1
2697        fi
2698        if [ $found -eq 0 ]; then
2699            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2700            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2701        fi
2702    fi
2703
2704    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2705        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2706        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2707        rm -f $mountpoint/sbin/devfsd
2708    fi
2709    cd "$old_pwd"
2710    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2711    if [ _"$MONDO_SHARE" != _"" ]; then
2712        MakeMondoConfigFile $mountpoint/tmp/$MRCFG
2713        cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk"
2714        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2715        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2716        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2717    fi
2718
2719    # Create module list to load at restore time
2720    rm -f $mountpoint/tmp/modules
2721    for m in $CDROM_MODS; do
2722        echo $m >> $mountpoint/tmp/modules
2723    done
2724
2725    mkdir -p $mountpoint/proc
2726    LogFile "---------------------------"
2727    LogFile "Content of initial ramdisk:"
2728    LogFile "---------------------------"
2729    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2730    LogFile "---------------------------"
2731
2732    # Determine what filesystem to use for initrd image
2733    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2734    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2735    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2736    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2737        # say what will be used
2738        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2739        # kernel expects linuxrc in ext2 filesystem
2740        ( cd "$mountpoint" && ln -sf usr/sbin/init linuxrc )
2741        # unmount loop filesystem and create image file using the standard approach
2742        umount $mountpoint || Die "Cannot unmount $tempfile"
2743        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2744        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2745            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2746        else
2747            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2748        fi
2749        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2750        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2751        rm -f ${rdz_fname}.tmp
2752        # log that we are done
2753        LogFile "      ...done."
2754    elif [ "$gvFileSystem" = "initramfs" ]; then
2755        # say what will be used
2756        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2757        # make sure that cpio is there
2758        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2759        # go into filesystem
2760        cd "$mountpoint"
2761        # kernel expects init in cpio filesystem
2762        ln -sf sbin/init init
2763        # create cpio image file and unmount loop filesystem
2764        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2765        cd "$old_pwd"
2766        umount $mountpoint || Die "Cannot unmount $tempfile"
2767        # log that we are done
2768        LogFile "      ...done."
2769    else
2770        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2771    fi
2772
2773    if [ "$res" -eq "0" ] ; then
2774        echo -en "..."
2775    else
2776        echo -en "\rMade an rdz WITH ERRORS.           \n"
2777    fi
2778    return 0
2779}
2780
2781
2782##############################################################################
2783#----------------------------------- Main -----------------------------------#
2784##############################################################################
2785
2786# Now we can create what we need
2787mkdir -p $MINDI_TMP
2788
2789# Purge from potential old run
2790if [ _"$MINDI_CACHE" = _"" ]; then
2791    Die "MINDI_CACHE undefined"
2792fi
2793
2794# --nolog needs to be first, and is used in analyze-my-lvm
2795if [ "$1" = "--nolog" ] ; then
2796    shift
2797    LOGFILE=/dev/stderr
2798else
2799    > $LOGFILE
2800fi
2801if [ "$1" = "--printvar" ] ; then
2802    shift
2803    if [ _"$1" != _"" ] ; then
2804        set | grep -Ew "^$1" | cut -d= -f2
2805    fi
2806    exit 0
2807fi
2808
2809LogFile "mindi v$MINDI_VERSION"
2810LogFile "$ARCH architecture detected"
2811LogFile "mindi called with the following arguments:"
2812echo "$@">> $LOGFILE
2813LogFile "Start date : `date`"
2814LogFile "-----------------------------"
2815
2816[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2817
2818# Log some capital variables
2819[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2820[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2821LogFile "MONDO_SHARE = $MONDO_SHARE"
2822LogFile "MINDI_LIB = $MINDI_LIB"
2823LogFile "MINDI_SBIN = $MINDI_SBIN"
2824LogFile "MINDI_CONF = $MINDI_CONF"
2825if [ -f $MINDI_CONFIG ]; then
2826    LogFile "-----------------------------"
2827    LogFile " Mindi configuration file    "
2828    LogFile "-----------------------------"
2829    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2830    LogFile "-----------------------------"
2831fi
2832LogFile "In Mindi"
2833LogFile "--------"
2834LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2835LogFile "BOOT_SIZE = $BOOT_SIZE"
2836LogFile "--------"
2837
2838trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2839
2840# Sanity checks
2841which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2842which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2843which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2844which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2845if which awk &> /dev/null ; then
2846    if ! which gawk &> /dev/null ; then
2847        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2848    fi
2849fi
2850which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2851[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2852
2853[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2854
2855# Update the PATH variable if incomplete
2856if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2857    PATH=$PATH:/sbin:/usr/sbin
2858    export PATH
2859    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2860    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2861    LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
2862fi
2863
2864if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2865    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2866fi
2867
2868### TODO
2869### Fix as it's not mandatory on ia64
2870if [ "$ARCH" = "ia64" ] ; then
2871    if which elilo &> /dev/null ; then
2872        LILO_EXE=elilo
2873    else
2874        LILO_EXE=`which false 2> /dev/null`
2875    fi
2876else
2877    FindIsolinuxBinary
2878fi
2879trap "Aborted" SIGTERM
2880DONE="\r\t\t\t\t\t\t\t\tDone.         "
2881kernelpath=""
2882MONDO_ROOT=/var/cache/mondo
2883mkdir -p $MONDO_ROOT
2884
2885if [ -d "/proc/lvm" ]; then
2886    # LVM v1
2887    LVMCMD=""
2888    LVM="v1"
2889elif [ -d "/dev/mapper" ]; then
2890    # LVM v2
2891    LVMCMD="lvm"
2892    LVM="v2"
2893else
2894    LVM="false"
2895fi
2896
2897if [ -e "/proc/cmdline" ]; then
2898    CMDLINE="/proc/cmdline"
2899elif [ -e "/tmp/cmdline" ]; then
2900    CMDLINE="/tmp/cmdline"
2901else
2902    CMDLINE="/dev/null"
2903fi
2904
2905LogFile "INFO: LVM set to $LVM"
2906LogFile "----------"
2907LogFile "mount result:"
2908LogFile "-------------"
2909mount >> $LOGFILE
2910if [ -e /etc/raidtab ]; then
2911    LogFile "-------------"
2912    LogFile "/etc/raidtab content:"
2913    LogFile "-------------"
2914    cat /etc/raidtab >> $LOGFILE
2915else
2916    LogFile "No file /etc/raidtab"
2917fi
2918if [ -e /etc/mdadm.conf ]; then
2919    LogFile "-------------"
2920    LogFile "/etc/mdadm.conf content:"
2921    LogFile "-------------"
2922    cat /etc/mdadm.conf >> $LOGFILE
2923else
2924    LogFile "-------------"
2925    LogFile "No file /etc/mdadm.conf"
2926fi
2927LogFile "-------------"
2928LogFile "cat $CMDLINE"
2929LogFile "-------------"
2930cat $CMDLINE >> $LOGFILE
2931LogFile "-------------"
2932LogFile "cat /proc/swaps:"
2933LogFile "-------------"
2934cat /proc/swaps >> $LOGFILE
2935LogFile "-------------"
2936if [ -e /proc/mdstat ]; then
2937    LogFile "cat /proc/mdstat:"
2938    LogFile "-------------"
2939    cat /proc/mdstat >> $LOGFILE
2940else
2941    LogFile "No pseudo file /proc/mdstat"
2942fi
2943LogFile "-------------"
2944LogFile "cat /proc/partitions:"
2945LogFile "-------------"
2946cat /proc/partitions >> $LOGFILE
2947LogFile "-------------"
2948LogFile "cat /proc/filesystems:"
2949LogFile "-------------"
2950cat /proc/filesystems >> $LOGFILE
2951LogFile "-------------"
2952LogFile "lsmod result:"
2953LogFile "-------------"
2954lsmod >> $LOGFILE
2955MODULES="`cat /proc/modules | $AWK '{print $1}'`"
2956if [ -x /usr/sbin/esxcfg-module ]; then
2957    LogFile "-------------"
2958    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
2959    LogFile "-------------"
2960    LogFile "VMWare modules"
2961    LogFile "-------------"
2962    /usr/sbin/esxcfg-module -l >> $LOGFILE
2963    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
2964fi
2965LogFile "-------------" 
2966LogFile "FORCE_MODS:"
2967LogFile "-------------"
2968LogFile "$FORCE_MODS"
2969LogFile "-------------"
2970LogFile "DENY_MODS:"
2971LogFile "-------------"
2972LogFile "$DENY_MODS"
2973LogFile "-------------"
2974LogFile "df result:"
2975LogFile "----------"
2976df -aT >> $LOGFILE
2977LogFile "-------------"
2978LogFile "df -i result:"
2979LogFile "----------"
2980df -i >> $LOGFILE
2981LogFile "-------------"
2982if [ -r /boot/grub/menu.lst ]; then
2983    LogFile "-------------"
2984    LogFile "INFO: /boot/grub/menu.lst content"
2985    LogFile "-------------"
2986    cat /boot/grub/menu.lst >> $LOGFILE
2987    LogFile "-------------"
2988fi
2989if [ -r /boot/grub/grub.conf ]; then
2990    LogFile "-------------"
2991    LogFile "INFO: /boot/grub/grub.conf content"
2992    LogFile "-------------"
2993    cat /boot/grub/grub.conf >> $LOGFILE
2994    LogFile "-------------"
2995fi
2996if [ -r /boot/grub/grub.cfg ]; then
2997    LogFile "-------------"
2998    LogFile "INFO: /boot/grub/grub.cfg content"
2999    LogFile "-------------"
3000    cat /boot/grub/grub.cfg >> $LOGFILE
3001    LogFile "-------------"
3002fi
3003if [ -r /boot/grub/device.map ]; then
3004    LogFile "-------------"
3005    LogFile "INFO: /boot/grub/device.map content"
3006    LogFile "-------------"
3007    cat /boot/grub/device.map >> $LOGFILE
3008    LogFile "-------------"
3009fi
3010if [ -r /etc/lilo.conf ]; then
3011    LogFile "-------------"
3012    LogFile "INFO: /etc/lilo.conf content"
3013    LogFile "-------------"
3014    cat /etc/lilo.conf >> $LOGFILE
3015fi
3016LogFile "Full fdisk info"
3017LogFile "---------------"
3018$FDISK -l >> $LOGFILE
3019LogFile "----------------"
3020
3021# Compute libata version
3022laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3023# If libata v2 is used then remove ide-generic as it will perturbate boot
3024if [ "`echo $MODULES | grep libata`" ]; then
3025    if [ "$laver" = "2" ]; then
3026        DENY_MODS="$DENY_MODS ide-generic"
3027        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3028        LogFile "-------------"
3029    fi
3030fi
3031
3032# Check for McAfee which disturbs the access to some files (tgz in articular)
3033if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3034    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3035    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3036    LogFile "WARNING: You have two options:"
3037    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3038    LogFile "WARNING:  - Disable the scanner during the backup"
3039fi
3040
3041# Check for ISO_CMD command
3042if [ ! -x $ISO_CMD ]; then
3043    LogFile "NOTE: No CD image (ISO file) utility found"
3044fi
3045
3046FLOPPY_WAS_MOUNTED=""
3047for mtpt in /media/floppy /mnt/floppy /floppy ; do
3048    if mount | grep -w $mtpt &> /dev/null ; then
3049        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3050        umount $mtpt
3051    fi
3052done
3053
3054#
3055# If we have a USB device we need to store info
3056# and remove it from the parameters line
3057#
3058if [ "$#" -ne "0" ] ; then
3059    if [ "$1" = "--usb" ] ; then
3060        shift
3061        USBDEVICE=$1
3062        if [ _"$USBDEVICE" = _"" ]; then
3063            Die "No USB device specified"
3064        fi
3065        shift
3066    fi
3067fi
3068
3069if [ "$#" -ne "0" ] ; then
3070    if [ "$1" = "--findkernel" ] ; then
3071        resk=`TryToFindKernelPath`
3072        # Avoids logfile content for mondo
3073        export MONDO_SHARE=""
3074        if [ "$resk" = "" ] ; then
3075            if [ $KERNEL_IS_XEN = "yes" ]; then
3076                echo "$xenkernelpath"
3077                LogFile "INFO: xenkernelpath = $xenkernelpath"
3078                MindiExit 0
3079            else
3080                MindiExit -1
3081            fi
3082        else
3083            echo "$resk"
3084            LogFile "INFO: kernelpath = $resk"
3085            MindiExit 0
3086        fi
3087    elif [ "$1" = "--locatedeps" ] ; then
3088        [ ! "$2" ] && Die "Please specify the binary to look at"
3089        LocateDeps $*
3090        # Avoids logfile content for mondo
3091        export MONDO_SHARE=""
3092        MindiExit $?
3093    elif [ "$1" = "--readalllink" ] ; then
3094        [ ! "$2" ] && Die "Please specify the binary to look at"
3095        # Avoids logfile content for mondo
3096        export MONDO_SHARE=""
3097        mr-read-all-link $2
3098        MindiExit $?
3099    elif [ "$1" = "--makemessage" ] ; then
3100        MakeMessageFile | cut -c1-80
3101        MindiExit 0
3102    elif [ "$1" = "--makemountlist" ] ; then
3103        [ ! "$2" ] && Die "Please specify the output file"
3104        MakeMountlist $2
3105        CheckMountlist $2
3106        # Avoids logfile content for mondo
3107        export MONDO_SHARE=""
3108        MindiExit $?
3109    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3110        echo "Mindi v$MINDI_VERSION"
3111        # Avoids logfile content for mondo
3112        export MONDO_SHARE=""
3113        MindiExit 0
3114    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3115        MONDO_TMP=$2
3116        # Change MINDI_TMP for the one provided by mondo
3117        # So that it can get back the built files
3118        if [ _"$MONDO_TMP" = _"" ]; then
3119            Die "MONDO_TMP is empty, aborting"
3120        fi
3121        if [ _"$MONDO_TMP" = _"/" ]; then
3122            Die "MONDO_TMP is /, aborting"
3123        fi
3124        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3125        rmdir $MINDI_TMP
3126        export MINDI_TMP=$MONDO_TMP
3127        mkdir -p $MINDI_TMP
3128
3129        # This is the scratch dir in mondo - subdir images
3130        MINDI_CACHE=$3
3131
3132        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3133        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3134       
3135###
3136### Sq-Modification...
3137### Attempt to locate kernel specific module path
3138### if module path is found then use it other wise use uname -r to set it...
3139###
3140        if [ $KERNEL_IS_XEN = "yes" ]; then
3141            LogAll "INFO: xenkernelpath = $xenkernelpath"
3142        fi
3143        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3144        if [ ! -d "/lib/modules/$kernelname" ]; then
3145           LogAll "WARNING: Module path for ${kernelpath} not found..."
3146           LogAll "         using running kernel\'s modules."
3147           kernelname=$KERVERRUN
3148        else
3149           LogAll "Using modules for kernel: ${kernelname}"
3150        fi
3151        LogAll "INFO: kernelname = $kernelname"
3152        LogAll "INFO: kernelpath = $kernelpath"
3153###
3154### end of Sq-Modification
3155###
3156        TAPEDEV=$5
3157        TAPESIZE=$6
3158        FILES_IN_FILELIST=$7
3159        USE_LZO=$8
3160        CDRECOVERY=$9
3161        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3162            IMAGE_DEVS=""
3163        else
3164            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3165        fi
3166        if [ "${11}" ] ; then
3167            LILO_OPTIONS=""
3168    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3169        fi
3170        LAST_FILELIST_NUMBER=${12}
3171        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3172        export MINDI_EXCLUDE_DEVS="${14}"
3173        USE_COMP="${15}"
3174        USE_LILO="${16}"
3175        USE_STAR="${17}"
3176        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3177        DIFFERENTIAL="${19}"
3178        USE_GZIP="${20}"
3179        NOT_BOOT="${21}"
3180        [ "$USE_COMP" = "" ] && USE_COMP=yes
3181        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3182        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3183        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3184        # MONDO_ROOT is the real scratchdir
3185        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3186        if [ _"$MONDO_ROOT" != _"" ]; then
3187            mkdir -p $MONDO_ROOT
3188        else
3189            Die "MONDO_ROOT is undefined"
3190        fi
3191    else
3192        LogScreen "Syntax: mindi (--custom ....)"
3193        MindiExit -1
3194    fi
3195fi
3196
3197if [ _"$MINDI_CACHE" != _"" ]; then
3198    rm -rf $MINDI_CACHE/* 2> /dev/null
3199    mkdir -p $MINDI_CACHE
3200fi
3201
3202[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3203
3204if [ _"$MONDO_SHARE" = _"" ]; then
3205    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3206    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3207    LogIt "BusyBox sources are available from http://www.busybox.net"
3208    LogIt "------------------------------------------------------------------------------"
3209else
3210    LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
3211fi
3212if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3213    LogIt "Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3214else
3215    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3216    MindiExit -1
3217fi
3218
3219for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3220    modinfo $i 2> /dev/null 1> /dev/null
3221    if [ $? -eq 0 ]; then
3222        modprobe $i 2>&1 > /dev/null
3223    fi
3224done
3225
3226KERN_DISK_MADE=""
3227
3228LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3229LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3230LogFile "NOT_BOOT = '$NOT_BOOT'"
3231if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3232    LogIt "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
3233    MakeMondoConfigFile $MINDI_TMP/$MRCFG
3234    MakeMountlist $MINDI_TMP/mountlist.txt
3235    CheckMountlist $MINDI_TMP/mountlist.txt
3236    mkdir -p $MINDI_TMP/small-all/tmp
3237    cd "$MINDI_TMP/small-all"
3238    cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3239    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3240    sleep 2
3241    LogIt "Done. Exiting."
3242    MindiExit 0
3243fi
3244
3245if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3246    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3247fi
3248
3249if [ "$kernelpath" = "" ] ; then
3250    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3251    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3252    read ch
3253    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3254        USE_OWN_KERNEL="yes"
3255    else
3256        USE_OWN_KERNEL="no"
3257    fi
3258    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3259        kernelpath=`TryToFindKernelPath`
3260        if [ "$kernelpath" = "" ] ; then
3261            echo -n "Please enter kernel path : "
3262            read kernelpath
3263        fi
3264    fi
3265fi
3266
3267echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3268[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3269
3270mountpoint=$MINDI_TMP/mountpoint.$$
3271PrepareDataDiskImages
3272
3273ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3274rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3275export ramdisk_size=$rds
3276
3277LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3278if [ "$ARCH" = "ia64" ] ; then
3279    PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
3280else
3281    PrepareBootDiskImage_ISOLINUX $kernelpath || Die "Failed to create $ramdisk_size KB disk image."
3282fi
3283
3284[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3285...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3286
3287if [ _"$MONDO_SHARE" = _"" ]; then
3288    ListImagesForUser
3289    OfferToMakeBootableISO
3290    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3291        OfferToMakeBootableUSB
3292    fi
3293    LogAll "Finished."
3294elif [ "$TAPEDEV" ] ; then
3295    if [ "$ARCH" != "ia64" ] ; then
3296        # We need to keep the img file as boot file for ia64 platform
3297        rm -f $MINDI_CACHE/{*img,*iso}
3298    else
3299        rm -f $MINDI_CACHE/*iso
3300    fi
3301    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3302        OfferToMakeBootableUSB
3303    fi
3304    OfferToMakeBootableISO
3305    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3306        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3307    else
3308        Die "Cannot find all.tar.gz, to be written to tape"
3309    fi
3310elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3311    OfferToMakeBootableUSB
3312else
3313    OfferToMakeBootableISO
3314fi
3315# cleanup
3316LogAll "INFO: $FRIENDLY_OUTSTRING"
3317for mtpt in $FLOPPY_WAS_MOUNTED ; do
3318    mount $mtpt
3319done
3320MindiExit 0
Note: See TracBrowser for help on using the repository browser.