source: branches/3.2/mindi/mindi @ 3257

Last change on this file since 3257 was 3257, checked in by bruno, 5 years ago
  • Remove debug print in Kernel.pm which solves wrong inclusion of kernel modules in boot media
  • Add support for latest Fedora keymap file (/etc/vconsole.conf) and non us keyboard detection
  • Improve initramfs detection for recent kernels (RE updated)
  • Fix udev deps inclusion by mimicing what was done for minimal
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 122.0 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3257 2014-03-06 10:24:24Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38# Temporary directory for mindi
39TMPDIR=/tmp
40
41EXTRA_SPACE=120000      # increase if you run out of ramdisk space
42BOOT_SIZE=65600         # size of the boot disk
43
44PROMPT_MAKE_CD_IMAGE="yes"
45    # Ask if you want to make a CD Image to be written?
46    # if this is set to 'no', then the image will be created automatically
47
48PROMPT_MAKE_USB_IMAGE="yes"
49    # Ask if you want to make a USB Image to be written?
50    # if this is set to 'no', then the image will be created automatically
51
52USE_OWN_KERNEL="yes"
53    # If set to "no", you will be prompted for whether or not
54    # you want to use your own kernel, or the supplied default.
55    # If "yes" mindi will automatically use your own kernel.
56
57KERNEL_IS_XEN="no"
58    # If set to "no", the kernel is not a Xen kernel
59    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
60xenkernelpath=""
61 
62MY_FSTAB=/etc/fstab
63TAPE_MODS="ht st osst ide-tape ide_tape"
64SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr"
65
66# ide-probe-mod
67IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio"
68PCMCIA_MODS="pcmcia_core ds yenta_socket"
69USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
70NET_MODS="nfs loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp"
71CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 vfat fat"
72# Those modules will only go on the backup media, not the boot media.
73EXTRA_MODS="$CDROM_MODS loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs "
74# Replace with that line for HP OCMP e.g.
75#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
76DENY_MODS="kqemu vxfen"
77# Force some modules to be included
78FORCE_MODS=""
79
80# Find MBR in case of bootable USB device to build
81MBRFILE=/usr/lib/syslinux/mbr.bin
82[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
83[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
84[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
85[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
86
87LOGFILE=/var/log/mindi.log
88BOOT_MEDIA_MESSAGE="\
89To format and restore all files automatically, type '0enuke07' <enter>.\n\
90To restore some/all files interactively, type '0einteractive07' <enter>.\n\
91To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
92To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
93\n\
94You may add one or more parameters as well as per the function keys below\n\
95e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
96\n\
97If restoring from a local external disk or USB key, do not connect it \n\
98until the boot-up has finished.\n\
99\n\
100\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
101"
102FDISK=$MINDI_SBIN/parted2fdisk
103
104# Using a config file allow to overwrite some values
105MINDI_CONFIG="$MINDI_CONF/mindi.conf"
106if [ -f $MINDI_CONFIG ]; then
107    . $MINDI_CONFIG
108fi
109DEPLIST_FILE="$MINDI_CONF/deplist.txt"
110DEPLIST_DIR="$MINDI_CONF/deplist.d"
111
112ISO_CMD="/usr/bin/mkisofs"
113ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
114
115# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
116# However, they use exactly the same command line parameters, so just
117# use genisoimage if it's available.
118if [ ! -x $ISO_CMD ]; then
119    ISO_CMD=/usr/bin/genisoimage
120fi
121
122
123# Function to log on screen only
124LogScreen() {
125    if [ -e /dev/stderr ] ; then
126        echo -e "$1" >> /dev/stderr
127    elif [ -e /usr/bin/logger ] ; then
128        /usr/bin/logger -s $1
129    fi
130}
131
132# Function to log in log file only
133LogFile() {
134
135    echo -e "$1" >> $LOGFILE
136    if [ _"$2" != _"" ]; then
137        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
138    fi
139    rm -f "$2"
140}
141
142# Function to log in both screen and logfile
143LogAll() {
144    LogScreen "$1"
145    LogFile "$1" "$2"
146}
147
148# Preserved for compatibility
149LogIt() {
150    LogAll "$1" "$2"
151}
152
153# Last function called before exiting
154# Parameter is exit code value
155# Should be declared here as used immediately below potentialy
156MindiExit() {
157    LogFile "Mindi $MINDI_VERSION is exiting" 
158    LogFile "End date : `date`" 
159    if [ _"$MONDO_SHARE" != _"" ] ; then
160        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
161        if [ -f $LOGFILE ]; then
162            cat $LOGFILE >> /var/log/mondoarchive.log
163        else
164            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
165        fi
166        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
167    fi
168
169    cd /
170    sync&
171
172    # Clean temporary files only when standalone mindi
173    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
174        rm -Rf $MINDI_TMP
175    fi
176    exit $1
177}
178
179Die() {
180    local i
181    if [ "$1" = "" ] ; then
182        LogAll "FATAL ERROR"
183    else
184        LogAll "FATAL ERROR. $1"
185    fi
186    if [ _"$2" != _"" ]; then
187        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
188    fi
189    rm -f "$2"
190
191    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
192    LogAll "See http://www.mondorescue.org for more information."
193    LogAll "WE CANNOT HELP unless you enclose that file.\n"
194    MindiExit -1
195}
196
197# Now we can create what we need
198MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
199if [ $? -ne 0 ]; then
200    df $TMPDIR
201    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
202fi
203if [ _"$MINDI_TMP" = _"" ]; then
204    Die "MINDI_TMP is empty, aborting"
205fi
206if [ _"$MINDI_TMP" = _"/" ]; then
207    Die "MINDI_TMP is /, aborting"
208fi
209export MINDI_TMP
210
211# ----------------------------------------------------------------------------
212
213
214AbortHere() {
215    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
216    Die "Program is terminating in response to signal received from OS/user"
217}
218
219
220Aborted() {
221    trap SIGHUP SIGTERM SIGTRAP SIGINT
222    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
223    [ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
224    Die "User abort."
225}
226
227
228AddFileToCfgIfExists() {
229    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
230}
231
232
233AddKeyboardMappingFile() {
234    local mappath r included_list included_item i res ii sss
235    mappath=$1
236    KBDEPTH=$(($KBDEPTH+1))
237    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
238    if [ -e "$bigdir/$mappath" ] ; then
239        LogFile "INFO: $mappath already added"
240        return
241    elif [ -d "$bigdir/$mappath" ] ; then
242        echo "Cannot add $mappath: it's a directory. Sorry."
243        return
244    fi
245    LogFile "INFO: Added kbd map $mappath"
246    if [ ! -e "$mappath" ] ; then
247        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
248        if [ ! -e "$mappath" ] ; then
249            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
250            return
251        fi
252    else
253        echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
254    fi
255
256    #cp -a -n --parents -t $mappath $bigdir 2>> $MINDI_TMP/$$.log || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
257    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
258    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
259        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
260    else
261        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
262    fi
263    for included_item in $included_list ; do
264        if [ ! -e "$included_item" ] ; then
265            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
266            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
267            for ii in $sss ; do
268                [ -e "$ii" ] && AddKeyboardMappingFile $ii
269            done
270        else
271            AddKeyboardMappingFile $included_item
272        fi
273    done
274}
275
276
277CopyDependenciesToDirectory() {
278    local outdir incoming counter d found tdir
279    outdir=$1
280    mkdir -p $outdir
281    incoming=`ReadLine`
282    counter=0
283    while [ "$incoming" != "" ] ; do
284        # Non absolute file names should not arrive till here => skipped
285        if [ `echo "$incoming" | cut -c1` != '/' ]; then
286            LogAll "WARNING: Unable to handle $incoming"
287            incoming=`ReadLine`
288            continue
289        fi
290        # no parent directory of incoming should be a link, copy is not possible in that case
291        d=`dirname "$incoming"`
292        found="false"
293        while [ $d != "/" -a $found = "false" ]; do
294            [ -h "$d" ] && found="true"
295            d=`dirname "$d"`
296        done
297        if [ -d "$incoming" -a ! -h "$incoming" ]; then
298            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
299        elif [ -e "$incoming" ] && [ $found = "false" ]; then
300            if [ ! -h "$incoming" ]; then
301                tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
302            else
303                tdir=`dirname "$incoming"`
304                if [ ! -e "$outdir/$tdir" ]; then
305                    mkdir -p "$outdir/$tdir"
306                fi
307                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
308            fi
309            # Only uncompress modules if not using udevd
310            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
311                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
312            fi
313            [ -x "$outdir" ] && StripExecutable $outdir
314            counter=$(($counter+1))
315            LogProgress $counter $2
316        fi
317        incoming=`ReadLine`
318    done
319}
320
321
322CountItemsIn() {
323    local r
324    r=0
325    for q in $1 ; do
326        r=$(($r+1))
327    done
328    echo $r
329}
330
331
332DropOptimizedLibraries() {
333    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
334    filelist=$1
335    outdir=$2
336
337    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
338    if [ "$list_of_optimized_libraries" = "" ] ; then
339        return 0
340    fi
341    echo -en "Dropping i686-optimized libraries if appropriate"
342    for optimized_lib_name in $list_of_optimized_libraries ; do
343        echo -en "."
344        reason=""
345        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
346        echo "$vanilla_lib_name" >> $filelist
347        LogFile "INFO: Adding $vanilla_lib_name to filelist"
348        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
349        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
350
351        # This may return multiple files
352        for resolved in `mr-read-all-link $vanilla_lib_name`; do
353            LogFile "INFO: Adding as deps $resolved to filelist"
354            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
355            if [ "$vanilla_resolved_name" != "$resolved" ]; then
356                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
357                rmdir $outdir$resolved > /dev/null 2> /dev/null
358                ln -sf $vanilla_resolved_name $outdir$resolved
359                LogFile "INFO: Excluding deps $resolved" 
360                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
361                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
362                echo "$vanilla_resolved_name" >> $filelist.tmp
363                mv -f $filelist.tmp $filelist
364            fi
365        done
366    done
367    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
368    mv -f $filelist.tmp $filelist
369    echo -e "$DONE"
370}
371
372
373FindAndAddUserKeyboardMappingFile() {
374    local r res mapfile mappath included_item included_list keyfile mp locale
375    LogAll "INFO: Analyzing your keyboard's configuration."
376    KEYDIR=/usr/lib/kbd
377    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
378    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
379    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
380    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
381    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
382    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
383    if [ ! -e "$KEYDIR" ] ; then
384        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
385        return 0
386    fi
387    if [ -e "/etc/sysconfig/keyboard" ] ; then
388        LogFile "INFO: Red Hat-style config detected."
389        keyfile=/etc/sysconfig/keyboard
390    elif [ -e "/etc/vconsole.conf" ] ; then
391        LogFile "INFO: New Fedora style config detected."
392        keyfile=/etc/vconsole.conf
393    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
394        LogFile "INFO: Slackware-style config detected."
395        keyfile=/etc/rc.d/rc.keymap
396    elif [ -e "/etc/rc.config" ] ; then
397        LogFile "INFO: Debian-style config detected."
398        keyfile=/etc/rc.config
399    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
400        LogFile "INFO: Debian-style config detected."
401        mkdir -p $bigdir/tmp
402        echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
403        KBDEPTH=0
404        mkdir -p $bigdir/etc/console
405        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
406        echo ""
407        echo -e "$DONE"
408        return 0
409    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
410        LogFile "INFO: Ubuntu-style config detected."
411        mkdir -p $bigdir/tmp
412        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
413            kbdfile="/etc/console-setup/boottime.kmap.gz"
414        else
415            kbdfile="/etc/console-setup/cached.kmap.gz"
416        fi
417        echo $kbdfile > $bigdir/tmp/KEYMAP-LIVES-HERE
418        KBDEPTH=0
419        mkdir -p $bigdir/etc/console-setup
420        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
421        echo ""
422        echo -e "$DONE"
423        return 0
424    elif [ -e "/etc/rc.conf" ] ; then
425        LogFile "INFO: ArchLinux config detected."
426        keyfile=/etc/rc.conf
427    elif [ -e "/etc/conf.d/keymaps" ] ; then
428        LogFile "INFO: Gentoo-style config detected."
429        keyfile=/etc/conf.d/keymaps
430    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
431        LogFile "INFO: X11-style config detected."
432        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
433    else
434        LogFile "Searching for rc.config ..."
435        keyfile=`find /etc -name rc.config | head -n1`
436        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
437            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
438            return
439        else
440            LogFile "INFO: Found $keyfile"
441        fi
442    fi
443    if [ ! -e "$KEYDIR/keymaps" ] ; then
444        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
445        return
446    fi
447    LogFile "INFO: keyfile=$keyfile"
448    # For SLES we need to remove the .map.gz extension Cf #614
449    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
450    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
451    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo, ArchLinux & New fedora
452    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
453    LogFile "INFO: locale=$locale"
454    #
455    # Process the keymaps dir once for all
456    # AddKeyboardMappingFile will use it recursively
457    #
458    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
459    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
460    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
461    # If we have multiple keymaps then log it !!
462    echo "$mp" | grep -q " " >> $LOGFILE
463    if [ $? -eq 0 ]; then
464        LogAll "WARNING: Multiple keymaps found: $mp"
465        LogFile "INFO: The following one will be used"
466    fi
467    for i in $mp ; do
468        mappath=$i
469        [ -e "$i" ] && [ ! -d "$i" ] && break
470    done
471    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
472        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
473    fi
474    LogFile "INFO: mappath = $mappath"
475    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
476        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
477        return
478    fi
479    LogAll "INFO: Adding the following keyboard mapping tables: "
480    mkdir -p $bigdir/tmp
481    echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
482    KBDEPTH=0
483    AddKeyboardMappingFile $mappath
484    echo ""
485    echo -e "$DONE"
486    rm -f $MINDI_TMP/keymaps.find
487    return 0
488}
489
490
491FindLdlinux32Binary() {
492    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
493    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
494    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
495    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
496    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
497    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
498    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
499    if [ ! -e "$LDLINUXC32" ]; then 
500        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
501        LDLINUXC32=/tmp/idoesnthopefullyexist
502    else
503        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
504    fi
505}
506
507
508FindMboot32Binary() {
509    MBOOTC32=/usr/lib/syslinux/mboot.c32
510    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/mboot.c32
511    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
512    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
513    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
514    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
515    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
516    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
517    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
518}
519
520FindIsolinuxBinary() {
521    ISOLINUX=/usr/lib/isolinux.bin
522    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
523    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
524    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
525    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
526    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
527    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
528    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
529    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
530}
531
532
533GenerateGiantDependencyList() {
534    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
535
536    echo -en "Analyzing dependency requirements"
537    outfile=$1
538    tempfile=$MINDI_TMP/$$.txt
539    incoming=`ReadLine`
540
541    > $tempfile
542    progress=0
543    res=0
544    noof_lines=$2
545    while [ "$incoming" != "" ] ; do
546        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
547            incoming=`ReadLine`
548            continue
549        fi
550        if [ "$incoming" = "LVMFILES:" ] ; then
551            break
552        fi
553        filelist=`GenerateListForFile "$incoming"`
554        r=$?
555        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
556        res=$(($res+$r))
557#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
558        for fname in $filelist ; do
559                [ "$fname" != "" ] && echo "$fname" >> $tempfile
560        done
561        progress=$(($progress+1))
562        LogProgress $progress $noof_lines
563        incoming=`ReadLine`
564    done
565    if  [ "$incoming" = "LVMFILES:" ] ; then
566        incoming=`ReadLine`
567        lvmversion=""
568        while [ "$incoming" != "" ] ; do
569            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
570                incoming=`ReadLine`
571                continue
572            fi
573            filelist=`GenerateListForFile "$incoming"`
574            for tool in $filelist ; do
575                lvmresolved=`readlink -f $tool`
576                if [ "$tool" = "$lvmresolved" ]; then
577                    echo "$tool" >> $tempfile
578                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
579                    if [ "$lvmversion" = "" ] ; then
580                        lvmversion=`$lvmresolved`
581                        echo "$lvmresolved" >> $tempfile
582                    fi
583                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
584                    if [ "$lvmversion" = "200" ]; then
585                        # pvdata and lvmcreate_initrd don't exist in LVM2
586                        case "$toolstripped" in
587                        "pvdata")
588                            continue
589                            ;;
590                        "lvmcreate_initrd")
591                            continue
592                            ;;
593                        esac
594                    fi
595                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
596                    if [ -e "$toolpath" ] ; then
597                        echo "$toolpath" >> $tempfile
598                        echo "$tool" >> $tempfile
599                    else
600                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
601                    fi
602                    if [ -e "$toolpath" ] ; then
603                        echo "$toolpath" >> $tempfile
604                        echo "$tool" >> $tempfile
605                    else
606                        echo "Where are your LVM-Tools? Couldn't find $tool"
607                    fi
608                else
609                    echo "$tool" >> $tempfile
610                fi
611            done
612            progress=$(($progress+1))
613            LogProgress $progress $noof_lines
614            incoming=`ReadLine`
615        done
616    fi
617    echo -en "$DONE\nMaking complete dependency list"
618
619    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
620    mv -f $tempfile.new $tempfile
621    > $outfile.pre
622    progress=0
623    noof_lines=`cat $tempfile | wc -l`
624    LogFile "---------------------------------"
625    LogFile "List of dependencies:             "
626    LogFile "---------------------------------"
627    for fname in `cat $tempfile` ; do
628        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
629        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
630        progress=$(($progress+1))
631        LogProgress $progress $noof_lines
632    done
633    if [ _"$MONDO_SHARE" != _"" ]; then
634        mkdir -p $bigdir/tmp
635        mkdir -p $bigdir/usr/bin
636        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
637            LogAll "\nINFO: Incorporating post-nuke tarball"
638            old_pwd=`pwd`
639            cd "$bigdir"
640            tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
641            cd "$old_pwd"
642        fi
643        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
644            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
645        else
646            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
647            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
648            LogIt "       If Mindi was called by Mondo then send me a bug report."
649            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
650            LogIt "       Finally, run Mindi again."
651            Die "Odd."
652        fi
653        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
654        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
655            LogAll "\nINFO: Incorporating Network-related settings"
656            for r in NETFS-* ISO-PREFIX ; do
657                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
658                LogFile "INFO: Copying $r to ramdisk"
659            done
660        fi
661    fi
662    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
663    rm -f $tempfile $outfile.pre
664    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
665    return $res
666}
667
668
669GenerateListForFile() {
670    local files_found loc fname incoming i res
671    incoming="$1"
672    files_found=""
673    res=0
674
675    for fname in $incoming ; do
676        files_found="$files_found `LocateFile $fname`"
677    done
678
679    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
680}
681
682
683# Returns all disk devices which are part of a raid array
684GetAllRaidMembers() {
685    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
686}
687
688
689GetFileSizeList() {
690    local i
691    for i in `find $1 -type d -o -print` ; do
692        du -sk $i
693    done
694}
695
696
697# Check kernel filesystem capabilites for accessing initrd image
698# Could be ext2 FS (old mode) or initramfs (new mode)
699#
700# Interface definition:
701# param #1: absolute path to kernel image
702GetInitrdFilesystemToUse() {
703
704    # interface test: make sure we have one parameter
705    if [ $# -ne 1 ]; then
706        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
707    fi
708
709    # interface parameters
710    local lvKernelImage=$1
711
712    # local constants (filesystem magic strings)
713    local lcMagicCramfs="<3>cramfs: wrong magic"
714    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
715    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
716    local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|<6>Trying to unpack rootfs image as initramfs"
717
718    # local variables
719    local lvOffset
720    local lvScanRes
721    local lvUseFilesystem
722
723    # say where we are.
724    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
725
726    # verify that file exists
727    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
728
729    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
730    file $lvKernelImage 2>&1 | grep -q gzip
731    if [ $? -eq 0 ]; then
732        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
733        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
734    else
735        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
736        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
737        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
738        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
739        if [ $lvOffset -eq 0 ]; then
740            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
741            lvScanRes=$lcMagicInitfs
742        else
743            lvOffset=`expr $lvOffset / 2`
744            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
745            # scan again  kernel image
746            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
747        fi
748    fi
749
750    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
751    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
752        lvUseFilesystem="ext2fs"
753    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
754        lvUseFilesystem="ext3fs"
755    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
756        lvUseFilesystem="initramfs"
757    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
758        lvUseFilesystem="cramfs"
759    else
760        # In that case, we are most probably after 2.6.30 and use the supported initramfs
761        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
762        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
763        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
764        lvUseFilesystem="initramfs"
765    fi
766
767    # say what we are using
768    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
769
770    # return file system to use
771    echo "$lvUseFilesystem"
772
773}
774
775# Searches members of raid device
776# $1: raid device (/dev/md...)
777GetRaidDevMembers() {
778    if [ ! -f /etc/raidtab ]; then 
779        return
780    fi
781    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
782}
783
784
785ListAllPartitions() {
786    local res currline partition all_partitions ap_orig remaining i j
787
788    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
789    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
790    if [ -e "/vmfs/volumes" ]; then
791        # For VMWare ESX 3 get the device names of these volumes
792        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
793    fi
794    return
795}
796
797
798ListImagesForUser() {
799    local path fname
800    path=$MINDI_CACHE
801    echo -en "In the directory '$path' you will find the images:-\n"
802    for fname in `ls $path | grep -F mindi-` ; do
803        printf "%19s " $fname
804    done
805    echo " "
806}
807
808
809ListKernelModulePaths() {
810    local module_list module fname r kern
811    module_list="$MODULES"
812    # Remove unwanted modules from list
813    for i in $DENY_MODS; do
814        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
815        EXTRA_MODS=`echo ${EXTRA_MODS} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
816    done
817###
818### Sq-Modification ... Use kernelname for module search path if specified
819###
820    if [ "${kernelname}" != "" ]
821    then
822        kern=${kernelname}
823    else
824        kern="$KERVERRUN"
825    fi
826    export KERVER=$kern
827###
828### Sq-Mod End
829###
830    # Get rid of duplicates, so that if a live kernel module also appears
831    # in $EXTRA_MODS that it won't get reported as "live module file not found" twice.
832    for module in `echo $module_list $EXTRA_MODS | tr ' ' '\n' | sort -u` ; do
833        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
834        if [ -z "$r" ]; then
835            if [ "`echo "$MODULES" | grep -w $module`" ]; then
836                r="[live module file not found]"
837            else
838                r="[extra module file not found]"
839            fi
840        else
841            [ -f "$r" ] && echo "$r"
842        fi
843        LogFile "INFO: module $module --> $r"
844    done
845    find /lib/modules/$kern/modules.* -type f 2> /dev/null
846}
847
848#
849# Critical function which computes all dependencies (dyn. lib.)
850# for a list of binaries
851#
852LocateDeps() {
853    local incoming fname deps
854    incoming="$*"
855    deps=""
856
857    for fname in $incoming ; do
858        if [ ! -e "$fname" ] ; then
859            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
860            if echo $fname | grep lvm &> /dev/null ; then
861                LogFile "          This warning only affects you if you are using LVM."
862                if echo "$MODULES" | grep lvm &> /dev/null ; then
863                    LogFile "          I think you are, so please take heed!"
864                else
865                    LogFile "          I don't think you are, so don't worry about it."
866                fi
867            fi
868        else
869            deps="$deps $fname" 
870        fi
871    done
872    mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
873}
874
875
876# Give all symlinks recursively of a full path name
877ReadAllLink() {
878    file="$1"
879
880    while [ `echo $file | grep -Ec '\.\./'` -ne 0 ]; do
881        # We need to normalise the path with .. in it
882        file=`echo $file | perl -pi -e 's|([^/]*)/([^/]+)/\.\./([^/]+)|$1/$3|g'`
883    done
884    echo "$file"
885    if [ ! -h $file ]; then
886        return 0
887    fi
888
889    link=`readlink $file`
890    d=`dirname $file`
891    # Is link a relative or full path name
892    fchar=`echo $link | cut -c1`
893    # If mother dir is a link print it
894    if [ -h "$d" ]; then
895        echo "$d"
896        d2=`readlink $d`
897        c2=`echo $d2 | cut -c1`
898        if [ "$c2" != "/" ]; then
899            if [ "$c2" != "." ]; then
900                d="/$d2"
901            else
902                d="$d/$d2"
903            fi
904        fi
905        echo "$d/`basename $file`"
906    fi
907    if [ "$fchar" != "/" ]; then
908        # Relative or local link
909        ReadAllLink "$d/$link" 
910    else
911        # Absolute path
912        ReadAllLink $link 
913    fi
914}
915
916
917LocateFile() {
918    local i j path fname_to_find location output resolved tmp stub cache_id loclist
919    fname_to_find="$1"
920    # It's an absolute path
921    j=`echo "$fname_to_find" | cut -c1`
922    if [ _"$j" = _"/" ]; then
923        dn=`dirname $fname_to_find`
924        # We suppose that the link is already included, just add the new file
925        if [ -h "$dn" ]; then
926            newdn=`readlink -f $dn`
927            bn=`basename $fname_to_find`
928            output="$newdn/$bn"
929        else
930            output="$fname_to_find"
931        fi
932        if [ -h "$output" ] ; then
933            output="`mr-read-all-link $output` $output"
934        fi
935        echo "$output"
936        return 0
937    fi
938    # It's not an absolute path
939    output=""
940    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
941    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
942        [ -h "$path" ] && continue
943        [ ! -e "$path/$fname_to_find" ] && continue
944        output="$path/$fname_to_find $output"
945        if [ -h "$path/$fname_to_find" ] ; then
946            output="`mr-read-all-link $path/$fname_to_find` $output"
947        fi
948    done
949    if [ "$output" = "" ] ; then
950        return 1
951    fi
952    echo "$output"
953    return 0
954}
955
956LogProgress() {
957    local i progress modres noof_lines
958 
959    progress=$1
960    noof_lines=$2
961
962    echo -en "\r\t\t\t\t\t\t\t\t"
963    i=$(($progress*100))
964    if [ $noof_lines -ne 0 ]; then
965        i=$(($i/$noof_lines))
966    else
967        i=0
968    fi
969    echo -en "$i"
970    echo -en "%"
971    modres=$(($progress%4))
972    [ "$modres" -eq "0" ] && echo -en "\t/"
973    [ "$modres" -eq "1" ] && echo -en "\t-"
974    [ "$modres" -eq "2" ] && echo -en "\t\\"
975    [ "$modres" -eq "3" ] && echo -en "\t|"
976}
977
978# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
979MakeMondoConfigFile() {
980    local outfile use_lzo use_comp use_star
981    outfile=$1
982    > $outfile
983    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
984    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
985    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
986    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
987    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
988    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
989    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
990    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
991    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
992    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
993    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
994    echo "use-lzo $use_lzo" >> $outfile
995    echo "use-gzip $use_gzip" >> $outfile
996    echo "use-star $use_star" >> $outfile
997    echo "use-lzma $use_lzma" >> $outfile
998    echo "use-comp $use_comp" >> $outfile
999    echo "datestamp `date`" >> $outfile
1000    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
1001    AddFileToCfgIfExists $MINDI_TMP/NETFS-DEV           netfs-dev           $outfile
1002    AddFileToCfgIfExists $MINDI_TMP/NETFS-PROTO         netfs-proto           $outfile
1003    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-IPADDR netfs-client-ipaddr $outfile
1004    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-NETMASK netfs-client-netmask $outfile
1005    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-BROADCAST netfs-client-broadcast $outfile
1006    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-HWADDR netfs-client-hwaddr $outfile
1007    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-DEFGW  netfs-client-defgw  $outfile
1008    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-MOUNT  netfs-server-mount  $outfile
1009    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-USER  netfs-server-user  $outfile
1010    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-PATH   netfs-server-path   $outfile
1011    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-IPADDR netfs-server-ipaddr $outfile
1012    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1013    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1014    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1015    AddFileToCfgIfExists $MINDI_TMP/ISODIR            isodir            $outfile
1016    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1017    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1018    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver   $outfile
1019    AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
1020    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1021    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1022    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1023    AddFileToCfgIfExists $MINDI_TMP/ACL      acl      $outfile
1024    AddFileToCfgIfExists $MINDI_TMP/XATTR      xattr      $outfile
1025    AddFileToCfgIfExists $MINDI_TMP/OBDR      obdr      $outfile
1026}
1027
1028# Get PV's for an LV
1029GetPVsForLV() {
1030  if [ -n "$1" ]; then
1031    vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1032    if [ -z "$vg" ]; then
1033      return
1034    fi
1035    $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1036  fi
1037}
1038
1039
1040MakeMountlist() {
1041    local mountlist all_partitions current_partition \
1042partition_size partition_format outstring partition_number \
1043partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1044absolute_partition old_partition_fmt current_lvolume uname skip
1045
1046    LogFile "------------------------------------"
1047    LogFile "Your raw fstab file looks like this:"
1048    LogFile "------------------------------------"
1049    cat $MY_FSTAB >> $LOGFILE
1050    LogAll "-----------------------------------"
1051    LogAll "Your mountlist will look like this:"
1052    LogAll "-----------------------------------"
1053
1054# mountlist(OUT)
1055    mountlist=$1
1056
1057# NB: partition = device
1058# NB: mountpt = where the device is mounted
1059
1060    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1061
1062    [ "$mountlist" != "" ] && rm -Rf $mountlist
1063    > $mountlist
1064    all_partitions=""
1065   
1066    if [ $LVM != "false" ]; then
1067        LogAll "INFO: Analyzing LVM..."
1068        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1069        if [ $? -ne 0 ]; then
1070            LVM="false"
1071        fi
1072        # Excluded LVs and GVs are not reported here
1073        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1074    fi
1075    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1076    for i in $IMAGE_DEVS ; do
1077        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1078    done
1079    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1080    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1081    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1082    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1083    for c_p in $all_partitions ; do
1084        # Skip fd/cd devices, network FS, cifs
1085        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1086        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1087        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1088            current_partition=`readlink -f $c_p`
1089            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1090                current_partition="$c_p"
1091            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1092                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1093                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1094            fi
1095            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1096        else
1097            current_partition="$c_p"
1098        fi
1099        [ "$c_p" = "none" ] && continue
1100        redhat_label=""
1101        label=""
1102        uuid=""
1103        absolute_partition=`readlink -f $c_p`
1104        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1105
1106        # set default in case we dont't find it
1107        str_to_find_fmt_with=$current_partition
1108
1109        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1110        # current_partition contains only first column of /etc/fstab
1111        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1112            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1113            actual_dev=""
1114
1115            # 1st try, findfs - the RHEL way of finding labels and their partitions
1116            if [ -x "/sbin/findfs" ]; then
1117                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1118            fi
1119   
1120            # 2nd try : blkid, the good way for all LABEL except swap
1121            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1122                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1123                # For LVM FS it will give a /dev/dm-# which should then be converted
1124                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1125                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1126                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1127                    for dev in `ls /dev/mapper/*`; do
1128                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1129                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1130                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1131                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1132                            break
1133                        fi
1134                    done
1135                fi
1136            fi
1137   
1138            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1139            # For LVM gives a /dev/mapper entry
1140            if [ "x$actual_dev" = "x" ]; then
1141                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1142            fi
1143   
1144            # 4th try, with vol_id
1145            # SWAP only
1146            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1147                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1148                for dev_swap in $list_swaps ; do
1149                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1150                    if [ "x$dev_exists" != "x" ]; then
1151                        actual_dev=$dev_swap
1152                        break;
1153                    fi
1154                done
1155            fi
1156
1157            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1158            # LABEL=SW-cciss/c0d0p3 (RDP)
1159            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1160            # SWAP only
1161            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1162                    skip=""
1163                    uname=$KERVERRUN
1164                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1165                    # 2.6.12 needs 16 (FC3)
1166                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1167                    # 2.6.19 and upper needs 1052
1168                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1169                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1170                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1171                    if [ $skip = "" ]; then
1172                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1173                    fi
1174                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1175                    do
1176                        # Location of the swap label for kernel 2.6
1177                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1178                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1179                            actual_dev=$try_dev
1180                        fi
1181                    done
1182            fi
1183
1184            # Check if one of all those tries has known success
1185            if [ "x$actual_dev" != "x" ]; then
1186                current_partition=$actual_dev
1187            else
1188                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1189            fi
1190        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1191        # current_partition contains only first column of /etc/fstab
1192        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1193            uuid=`echo "$current_partition" | cut -d'=' -f2`
1194            actual_dev=""
1195
1196            # 1st try, findfs - the RHEL way of finding labels and their partitions
1197            if [ -x "/sbin/findfs" ]; then
1198                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1199            fi
1200   
1201            # 2nd try : blkid, the good way for all UUID except swap
1202            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1203                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1204                # For LVM FS it will give a /dev/dm-# which should then be converted
1205                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1206                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1207                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1208                    for dev in `ls /dev/mapper/*`; do
1209                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1210                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1211                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1212                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1213                            break
1214                        fi
1215                    done
1216                fi
1217            fi
1218   
1219            # 3th try, with vol_id
1220            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1221                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1222                for dev in $list_dev ; do
1223                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1224                    if [ "x$dev_exists" != "x" ]; then
1225                        actual_dev=$dev
1226                        break;
1227                    fi
1228                done
1229            fi
1230
1231            # 4th try, with dumpuuid (VMWare only ?) for swap
1232            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1233                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1234                for dev in $list_dev ; do
1235                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1236                    if [ "x$dev_exists" != "x" ]; then
1237                        actual_dev=$dev
1238                        break;
1239                    fi
1240                done
1241            fi
1242
1243            # Check if one of all those tries has known success
1244            if [ "x$actual_dev" != "x" ]; then
1245                current_partition=$actual_dev
1246            else
1247                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1248            fi
1249        else
1250            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1251            # they use symlinks in fstab unrelated to what is shown in mount !
1252            if [ _"$partition_mountpt" = _"" ]; then
1253                # set default in case we dont't find it
1254                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1255                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1256                            str_to_find_fmt_with=$tmpp
1257                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1258                            break;
1259                        fi
1260                done
1261            fi
1262        fi
1263
1264        # Detects noauto partitions not mounted and exclude them
1265        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1266        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1267                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1268            continue
1269        fi
1270        # Detects bind partitions and exclude them
1271        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1272                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1273            continue
1274        fi
1275
1276        # Look for devices which have to be excluded
1277        skip=0
1278        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1279            l=""
1280            list_of_devices="`mr-read-all-link $current_partition`"
1281            for d in $list_of_devices; do
1282                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1283            done
1284
1285            # Remove PVs from LVs excluded
1286            l="$l `GetPVsForLV $current_partition`"
1287
1288            # We want a single unique list
1289            list_of_devices="`echo $l | sort -u`"
1290
1291            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1292                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1293                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1294                    skip=1
1295                    continue
1296                fi
1297            done
1298        fi
1299        if [ $skip -eq 1 ]; then
1300            continue
1301        fi
1302
1303        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1304        # Detects iso9660 ISO images and exclude them
1305        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1306                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1307            continue
1308        fi
1309        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1310        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1311        # the former is then a link to the latter, so we test whether
1312        # $current_partition is actually such a link or not and set
1313        # $current_lvolume accordingly. On Debian you may find more than one answer
1314        # so we remove the one corresponding to /dev/.static
1315        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1316        # principle is the same and we need to find the link to it as well.
1317        # Note that $current_lvolume may well be an
1318        # ordinary device. It is just to make sure that we feed the right value
1319        # into any of the LVM tools if possible.
1320
1321        current_lvolume="$current_partition"
1322        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1323            # .static dir are a Debian specificity
1324            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1325            echo $current_lvolume | grep -q ' '
1326            if [ $? -eq 0 ]; then
1327                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1328            fi
1329            # if it's not found, it may well be a real device such as a multipath one
1330            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1331            if [ _"$current_lvolume" = _"" ]; then
1332                current_lvolume="$current_partition"
1333            fi
1334        fi
1335        #
1336        # End of LVM device style variation code (other than $current_lvolume).
1337
1338        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1339            # Size computed via LVM not directly
1340            partition_size="lvm"
1341        else
1342            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1343            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1344            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1345                # Skip swap files
1346                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1347                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1348                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1349                [ "$partition_format" != "swap" ] && partition_format="swap"
1350                if [ "$partition_size" = "" ] ; then
1351                    totalsize=0
1352                    items=0
1353                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1354                        totalsize=$(($totalsize+$i))
1355                        items=$(($items+1))
1356                    done
1357                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1358                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1359                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1360                fi
1361            else
1362                partition_size=`SizeOfPartition $current_partition`
1363            fi
1364        fi
1365        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1366        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1367        if [ "$partition_mountpt" = "" ] ; then
1368            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1369                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1370                    partition_mountpt="raid"
1371                    partition_format="raid"
1372                else
1373                    partition_mountpt="lvm"
1374                    partition_format="lvm"
1375                fi
1376            fi
1377        fi
1378        psz=$partition_size
1379        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1380        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1381        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1382            partition_mountpt="image"
1383            old_partition_fmt=$partition_format
1384            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1385            partition_size=$(($partition_size+1)); # just in case
1386            if [ "$partition_format" = "Linux" ] ; then
1387                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1388                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1389                partition_format=$old_partition_fmt
1390            fi
1391        fi
1392
1393        if [ ! "$partition_mountpt" ] ; then
1394            LogFile "------- $FDISK -l $qq log ------------"
1395            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1396                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1397                [ "$partition_format" ] && break
1398            done
1399            LogFile "------- $FDISK log end ------------"
1400            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1401                partition_format="compaq"
1402            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1403                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1404                continue
1405            fi
1406        fi
1407        if [ "$redhat_label" ]; then
1408            label="$redhat_label"
1409        elif [ "$uuid" ]; then
1410            label="$uuid"
1411        fi
1412        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1413        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1414        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1415        if [ "$current_partition" = "" ] ; then
1416            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1417        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1418            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1419                partition_mountpt=raid
1420                partition_format=raid
1421                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1422                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1423            else
1424                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1425            fi
1426        elif [ "$partition_format" = "" ] ; then
1427            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1428        elif [ "$partition_size" = "" ] ; then
1429            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1430        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1431            continue
1432        else
1433            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1434                LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1435                partition_format="vfat"
1436            fi
1437            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1438            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1439        fi
1440    done
1441    LogAll "-----------------------------------" 
1442}
1443
1444CheckMountlist() {
1445    local file=$1
1446    # Coherency verification
1447    ML01=`cat $file | wc -l`
1448    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1449    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1450    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1451    if [ "$ML01" -ne "$ML1" ]; then
1452        LogFile "--------------------------------------------"
1453        LogAll "WARNING: Duplicate device entry in mountlist"
1454        LogFile "--------------------------------------------"
1455    fi
1456    if [ "$ML02" -ne "$ML2" ]; then
1457        LogFile "--------------------------------------------"
1458        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1459        LogFile "------------------------------------------------"
1460    fi
1461}
1462
1463OfferToMakeBootableISO() {
1464    local i old_pwd
1465    if [ -z "$ISO_CMD" ]; then
1466        LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1467        return
1468    fi
1469    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1470        echo -en "Shall I make a bootable CD image? (y/[n]) "
1471        read i
1472        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1473    fi
1474    rm -Rf $MINDI_TMP/iso
1475    mkdir -p $MINDI_TMP/iso/{images,archives}
1476    LogFile "INFO: mindi_lib = $MINDI_LIB"
1477    cp -f $MINDI_CACHE/{*.gz,*.img} $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1478    for i in memdisk memtest.bin memtest.img ; do
1479        j=$MINDI_LIB/$i
1480        k=$MINDI_TMP/iso
1481        if [ -e "$j" ] ; then
1482            LogAll "INFO: Copying $j to $k"
1483            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1484            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1485            if [ _"$MONDO_SHARE" != _"" ]; then 
1486                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1487            fi
1488        fi
1489    done
1490    MakeMessageFile $MINDI_TMP/iso | cut -c1-80 > $MINDI_TMP/iso/message.txt
1491    if [ $KERNEL_IS_XEN = "yes" ]; then
1492        FindMboot32Binary
1493        cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1494        cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1495    fi
1496    # Useful for syslinux 5.x
1497    FindLdlinux32Binary
1498    if [ -e $LDLINUXC32 ]; then
1499        cp $LDLINUXC32 $MINDI_TMP/iso/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to mindi tmp ($MINDI_TMP/iso/ldlinux.c32). Did you run out of disk space?"
1500    fi
1501    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1502    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1503
1504    if [ _"$MONDO_SHARE" != _"" ]; then 
1505        if [ $KERNEL_IS_XEN = "yes" ]; then
1506            cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MONDO_ROOT/iso/xen.gz). Did you run out of disk space?"
1507            cp $MBOOTC32 $MONDO_ROOT/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MONDO_ROOT/iso/mboot.c32). Did you run out of disk space?"
1508        fi
1509        if [ -e $LDLINUXC32 ]; then
1510            cp $LDLINUXC32 $MONDO_ROOT/iso/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to $MONDO_ROOT/iso/ldlinux.c32. Did you run out of disk space?"
1511        fi
1512        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1513        cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1514    fi
1515    MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1516    if [ "$ARCH" != "ia64" ] ; then
1517        cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1518    fi
1519    old_pwd=`pwd`
1520    cd "$MINDI_TMP/iso"
1521    if [ "$ARCH" != "ia64" ] ; then
1522        if [ _"$MONDO_SHARE" != _"" ]; then 
1523            cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1524            if [ -e $MINDI_TMP/iso/ldlinux.c32 ]; then
1525                cp $MINDI_TMP/iso/ldlinux.c32 $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy ldlinux.c32 (from $MINDI_TMP/iso/$LDLINUXC32) to $MONDO_ROOT. Did you run out of disk space?"
1526            fi
1527            if [ $KERNEL_IS_XEN = "yes" ]; then
1528                cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1529            fi
1530            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1531        fi
1532        $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1533    else
1534        $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1535    fi
1536    if [ "$?" -ne "0" ] ; then
1537        LogFile "----------- $ISO_CMD's errors --------------"
1538        LogAll "$ISO_CMD returned the following errors:"
1539        cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1540        LogAll "ERROR: Failed to create ISO image."
1541    else
1542        LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1543    fi
1544    rm -f $MINDI_TMP/mkisofs.log
1545    cd "$old_pwd"
1546}
1547
1548
1549OfferToMakeBootableUSB() {
1550    local i
1551    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1552        echo -n "Shall I make a bootable USB device ? (y/[n]) "
1553        read i
1554        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1555        if [ "$USBDEVICE" = "" ]; then
1556            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1557            read dev
1558            USBDEVICE=$dev
1559        fi
1560        echo "WARNING: This will erase all content on $USBDEVICE"
1561        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1562        read i
1563        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1564    fi
1565    rm -Rf $MINDI_TMP/usb
1566    mkdir -p $MINDI_TMP/usb
1567    USBPART="${USBDEVICE}1"
1568
1569    echo -en "Transforming $USBDEVICE in a Bootable device " 
1570    echo -en "."
1571    LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1572    LogFile "INFO: Checking $USBDEVICE"
1573    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1574    if [ $? -ne 0 ]; then
1575        LogAll "ERROR: Unable to access $USBDEVICE"
1576        LogAll "       Make sure your USB device is plugged in"
1577        MindiExit -1
1578    fi
1579    echo -en "."
1580    # Some distro do auto mount at that point (Ubuntu)
1581    LogFile "INFO: Unmounting $USBPART just in case"
1582    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1583    # If your key has no MBR it may cause an issue
1584    # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1585    if [ -r $MBRFILE ]; then
1586        LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1587        dd if=$MBRFILE of=$USBDEVICE
1588    else
1589        LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1590        LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1591    fi
1592    LogFile "INFO: Preparing $USBDEVICE"
1593    cat > $MINDI_TMP/fdisk.txt << EOF
1594d
1595d
1596d
1597d
1598n
1599p
16001
1601
1602
1603t
1604b
1605a
16061
1607w
1608EOF
1609    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1610    if [ $? -ne 0 ]; then
1611        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1612        LogAll "       Make sure your USB device is plugged in"
1613        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1614        MindiExit -1
1615    fi
1616    LogFile "fdisk build file"
1617    LogFile "----------------"
1618    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1619    LogFile "----------------"
1620    rm -f $MINDI_TMP/fdisk.txt
1621    LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1622    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1623    echo -en "."
1624    # Calling kpartx in case devices were not created
1625    if [ -x "/sbin/kpartx" ]; then
1626        /sbin/kpartx -a $USBDEVICE
1627    fi
1628    # Some distro do auto mount at that point (Ubuntu)
1629    LogFile "INFO: Unmounting $USBPART just in case again"
1630    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1631    echo -en "."
1632    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1633    if [ "`which dmsetup`" != "" ]; then
1634        block_id="`echo $USBPART | sed 's|/dev/||g'`"
1635        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1636            LogFile "INFO: Removing $block_id from device mapper."
1637            sleep 1
1638            dmsetup remove $block_id
1639        fi
1640    fi
1641    echo -en "."
1642    LogFile "INFO: Creating a vfat filesystem on $USBPART"
1643    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1644    if [ $? -ne 0 ]; then
1645        LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1646        LogAll "       Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1647        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1648        MindiExit -1
1649    fi
1650    echo -en "."
1651    LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1652    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1653    if [ $? -ne 0 ]; then
1654        LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1655        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1656        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1657        MindiExit -1
1658    fi
1659    echo -en "."
1660    mkdir -p $MINDI_TMP/usb/images
1661    cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1662    echo -en "."
1663    LogFile "INFO: mindi_lib = $MINDI_LIB"
1664    for i in memdisk memtest.bin memtest.img ; do
1665        j=$MINDI_LIB/$i
1666        k=$MINDI_TMP/usb
1667        if [ -e "$j" ] ; then
1668            LogIt "INFO: Copying $j to $k"
1669            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1670            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1671        fi
1672    done
1673    echo -en "."
1674    MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1675    echo -en "."
1676    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1677    echo -en "."
1678    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1679    echo -en "."
1680    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1681    echo -en "."
1682    LogAll "----------- syslinux's conf --------------"
1683    cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1684    LogAll "------------------------------------------"
1685    umount $MINDI_TMP/usb
1686    if [ "$ARCH" != "ia64" ] ; then
1687        syslinux -v 2>&1 | grep -q 4.02
1688        if [ $? -eq 0 ]; then
1689            # This buggy version of syslinux requires a call to --stupid and not -s
1690            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1691            res=$?
1692        else
1693            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1694            res=$?
1695        fi
1696        if [ $res -ne 0 ] ; then
1697            LogAll "----------- syslinux's errors --------------"
1698            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1699            LogAll "------------------------------------------"
1700            LogIt "ERROR: Failed to create USB image."
1701        else
1702            echo -e "$DONE"
1703            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1704        fi
1705        rm -f $MINDI_TMP/syslinux.log
1706    else
1707        LogAll "ERROR: No USB boot support for ia64"
1708        MindiExit -1
1709    fi
1710}
1711
1712
1713MakeMessageFile() {
1714   
1715    if [ -x "/bin/lsb_release" ]; then
1716        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1717    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1718        DESC="Arch Linux"
1719        if [ -r /var/log/pacman.log ]; then
1720            # there are no releases but we can get the last system upgrade
1721            # Output example:   Arch Linux [2011-03-03 01:39]
1722            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1723        fi
1724    elif [ -r /etc/issue.net ]; then
1725        DESC=`head -1 /etc/issue.net`
1726    elif [ -r /etc/issue ]; then
1727        DESC=`head -1 /etc/issue`
1728    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1729        # For pb >= 0.9.8
1730        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4`
1731    else
1732        DESC="Unknown desc"
1733    fi
1734    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1735    if [ _"$MONDO_SHARE" != _"" ]; then
1736        if [ "$CDRECOVERY" != "yes" ] ; then
1737            if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1738                echo -en "Press <enter> to continue.\n"
1739            elif [ ! "$MINDI_TMP" ] ; then
1740                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1741                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1742                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1743                fi
1744            else
1745                echo -en "$BOOT_MEDIA_MESSAGE"
1746            fi
1747        else
1748            echo -en "\
1749To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1750CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1751        fi
1752    fi
1753
1754    # Also create the other help screens
1755    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1756    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1757    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1758}
1759
1760
1761MakeBootConfFile() {
1762    local options i ooo
1763    options=""
1764    # Type of boot file (elilo or syslinux/isolinux)
1765    type=$1
1766    if [ "$type" = "elilo" ]; then
1767        sep="="
1768    else
1769        sep=" "
1770    fi
1771
1772    # Generic header for conf file
1773    if [ "$type" != "elilo" ] ; then
1774        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1775    else
1776        echo -en "prompt\n"
1777    fi
1778
1779    # Compute which default option to boot from
1780    if [ "$CDRECOVERY" = "yes" ] ; then
1781        echo -en "default${sep}RESTORE\n"
1782    # In case it's mondoarchive
1783    elif [ _"$MONDO_SHARE" != _"" ]; then
1784        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1785            echo -en "default${sep}iso\n"
1786        else
1787            echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
1788        fi
1789    else
1790        echo -en "default${sep}expert\n"
1791    fi
1792
1793    # Handle timeout
1794    if [ "$CDRECOVERY" != "yes" ] ; then
1795        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1796    else
1797        echo -en "timeout${sep}10000\n"
1798    fi
1799    echo -en "\n"
1800
1801    # prepare which labels will be generated
1802    if [ "$CDRECOVERY" = "yes" ] ; then
1803        options="RESTORE expert"
1804    else
1805        if [ _"$MONDO_SHARE" != _"" ]; then
1806            options="interactive expert compare iso nuke isonuke"
1807        else
1808            options="expert"
1809        fi
1810    fi
1811
1812    # Generate rest of conf file
1813    for i in $options ; do
1814        ooo=$i
1815        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1816        if [ "$type" = "elilo" ]; then
1817            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1818        else
1819            ps="/"
1820            if [ "$type" = "syslinux" ]; then
1821                ps=""
1822            fi
1823            if [ $KERNEL_IS_XEN = "no" ]; then
1824                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1825            else
1826                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1827            fi
1828        fi
1829        echo -en "$outstr"
1830    done
1831    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1832        if [ "$type" = "elilo" ]; then
1833            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1834            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1835        else
1836            ps="/"
1837            if [ "$type" = "syslinux" ]; then
1838                ps=""
1839            fi
1840            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1841            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1842        fi
1843    fi
1844}
1845
1846
1847PrepareBootDiskImage_LILO() {
1848    local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1849    imagesdir=$MINDI_CACHE
1850    kernelpath=$1
1851
1852    retval=0
1853
1854    old_pwd=`pwd`
1855    [ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
1856    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1857    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1858    echo -en "..."
1859    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1860    mkdir -p $mountpoint
1861    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1862    LogFile "Creating vfat filesystem on $imagefile" 
1863    mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1864    mount -t vfat -o loop $imagefile $mountpoint || LogAll "ERROR: Cannot mount (PBDI)"
1865
1866    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1867    mkdir -p $mountpoint/etc
1868    liloconf=$mountpoint/elilo.conf
1869
1870    MakeBootConfFile elilo > $liloconf
1871
1872    # Copy it so that CD-ROM menu entry is satisfied
1873    mountefi=0
1874    df -T | grep /boot/efi | grep -q vfat
1875    if [ $? -ne 0 ]; then
1876        mount /boot/efi
1877        if [ $? -ne 0 ]; then
1878            echo "You have to mount your EFI partition when using mindi"
1879            MindiExit -1
1880        fi
1881        mountefi=1
1882    fi
1883    el=`find /boot/efi -name elilo.efi`
1884    cp $el $mountpoint
1885    cp $liloconf $mountpoint
1886    if [ $mountefi -eq 1 ]; then
1887        umount /boot/efi 2>&1 > /dev/null
1888    fi
1889
1890    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
1891    cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1892    if [ "$?" -ne "0" ] ; then
1893        LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1894        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1895        LogIt "       Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1896        rm -f $MINDI_TMP/mtpt.$$
1897        LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1898        retval=$(($retval+1))
1899    fi
1900    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1901
1902    mkdir -p $mountpoint/tmp
1903    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1904        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1905    fi
1906
1907    # copy the kernel across
1908    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1909    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1910    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1911    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1912    if [ "$?" -ne "0" ] ; then
1913        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1914        du -sk $mountpoint/* >> $LOGFILE
1915        LogFile "--- end of list of files ---"
1916        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1917        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1918        cd "$old_pwd"
1919        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1920        rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1921    #   losetup /dev/loop0 -d
1922        [ "$imagefile" != "" ] && rm -f $imagefile
1923        LogIt "ERROR: Sorry, your kernel is too big for your image"
1924        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1925        return 0
1926    fi
1927    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1928    LogFile "INFO: Free space left on image = $free_space KB"
1929    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1930    # make it bootable
1931    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1932    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1933    if [ "$KERN_DISK_MADE" ] ; then
1934        LogFile "INFO: Not running LILO. It's not that kind of disk."
1935    fi
1936
1937    cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1938    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1939    echo -en "..."
1940    rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1941    if [ "$retval" -eq "0" ] ; then
1942        echo -en "...$DONE\n"
1943        if [ "$KERN_DISK_MADE" ] ; then
1944            LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1945        fi
1946    else
1947        echo -en "...failed\n"
1948        LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1949        [ "$imagefile" != "" ] && rm -f $imagefile
1950    fi
1951    [ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
1952    return $retval
1953}
1954
1955
1956PrepareBootDiskImage_ISOLINUX() {
1957    local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage retval
1958    imagesdir=$MINDI_CACHE
1959    kernelpath=$1
1960    do_boot_root_thingy=""
1961    retval=0
1962
1963    old_pwd=`pwd`
1964    [ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
1965    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1966    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1967    echo -en "..."
1968    imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
1969    mkdir -p $mountpoint
1970    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1971    LogFile "INFO: Creating vfat filesystem on $imagefile"
1972    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1973    # syslinux should be run on a  local file (doen't work through NFS Cf: #297)
1974    syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1975
1976    # Only move it now to its final destination and use it now
1977    mv $imagefile $imagesdir
1978    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1979
1980    mount -t vfat -o loop $imagefile $mountpoint || LogIt "ERROR: Cannot mount (PBDI)"
1981
1982    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1983    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1984    MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
1985    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1986    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1987    if [ "$?" -ne "0" ] ; then
1988        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1989        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1990        LogAll "       Please unload some of your modules and try again."
1991        rm -f $MINDI_TMP/mtpt.$$
1992        LogAll "       Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
1993        LogAll "       Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1994        retval=$(($retval+1))
1995    fi
1996
1997    mkdir -p $mountpoint/tmp
1998    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1999        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
2000    fi
2001
2002    # copy the kernel across
2003    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
2004    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
2005    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
2006         
2007    retval=0
2008    cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
2009    retval=$?
2010    if [ $KERNEL_IS_XEN = "yes" ]; then
2011        cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
2012        let retval+=$?
2013    fi
2014 
2015    if [ "$retval" -ne "0" ] ; then
2016        LogFile "INFO: Files at mountpoint ($mountpoint) :"
2017        du -sk $mountpoint/* >> $LOGFILE
2018        LogFile "--- end of list of files ---"
2019        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
2020        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
2021        cd "$old_pwd"
2022        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2023        rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2024
2025        LogIt "ERROR: Sorry, your kernel is too big for your image"
2026        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
2027    fi
2028    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
2029    LogFile "INFO: Free space left on image = $free_space KB"
2030    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
2031
2032    # make it bootable
2033    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
2034    mkdir -p $mountpoint/etc
2035    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
2036    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2037    echo -en "..."
2038    rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2039
2040    if [ "$retval" -eq "0" ] ; then
2041        echo -en "...$DONE\n"
2042        if [ "$KERN_DISK_MADE" ] ; then
2043            [ "$imagefile" != "" ] && rm -f $imagefile
2044            LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2045        fi
2046    else
2047        echo -en "...failed\n"
2048        LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2049        [ "$imagefile" != "" ] && rm -f $imagefile
2050    fi
2051    [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning nonzero"
2052    return $retval
2053}
2054
2055
2056ParseModprobeForIncludes() {
2057local MODPROBE_CONF mpincfile includes include
2058
2059MODPROBE_CONF=/etc/modprobe.conf
2060mpincfile=$1
2061touch $mpincfile
2062if [ -a $MODPROBE_CONF ]; then
2063    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2064    if [ -n "$includes" ]; then
2065        for include in $includes
2066        do
2067            if [ -a "$include" ]; then
2068                echo $include >> $mpincfile
2069            fi
2070        done
2071    fi
2072fi
2073}
2074
2075
2076PrepareDataDiskImages() {
2077    local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
2078
2079    imagesdir=$MINDI_CACHE
2080    rm -f $imagesdir/mindi.iso
2081    needlist=$MINDI_TMP/what-we-need.txt
2082    bigdir=$MINDI_TMP/bigdir
2083    mkdir -p $bigdir/usr/bin
2084    mkdir -p $bigdir/usr/sbin
2085    includefile=$MINDI_TMP/$$.includefile.txt
2086
2087    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2088    if [ -e "$DEPLIST_FILE" ]; then
2089        lfiles="$DEPLIST_FILE $lfiles"
2090    fi
2091    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2092    ParseModprobeForIncludes $includefile
2093    lines=$(($lines+`cat $includefile | wc -l`))
2094    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2095    res=$?
2096    rm -f $includefile
2097    ListKernelModulePaths >> $needlist
2098    if [ "$res" -ne "0" ] ; then
2099        Die "You have $res files present in dependency list\nbut absent from filesystem."
2100    fi
2101    FindAndAddUserKeyboardMappingFile
2102    mkdir -p $bigdir/tmp
2103    if [ _"$MONDO_SHARE" != _"" ]; then
2104        MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2105        cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
2106    fi
2107    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2108    DropOptimizedLibraries $needlist $bigdir
2109    echo -en "Assembling dependency files"
2110
2111    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2112
2113    # also copy io.sys and msdos.sys, if we can find them
2114    for i in `mount | cut -d' ' -f3` ; do
2115        for j in io.sys msdos.sys ; do
2116            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2117        done
2118    done
2119
2120    # master boot record, too
2121    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2122    if [ "$i" ] ; then
2123        LogAll "INFO: Backing up $i's MBR"
2124        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2125        sleep 1
2126        sync
2127        j=$i
2128        [ -h "$j" ] && j=`readlink -f $j`
2129        LogAll "INFO: Creating /dev/boot_device ($j)"
2130        mkdir -p $bigdir/dev
2131        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2132    fi
2133
2134    old_pwd=`pwd`
2135    cd "$bigdir"
2136
2137    # Get terminfo content
2138    ti="usr/share/terminfo/l"
2139    if [ -d /$ti ]; then
2140        mkdir -p $ti
2141        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2142    fi
2143    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2144        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2145        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2146    fi
2147    if [ -d "/lib/dev-state" ]; then 
2148        cp -a /lib/dev-state ./lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2149    fi
2150    cd "$old_pwd"
2151    echo -e "$DONE"
2152    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2153    MakeMountlist $MINDI_TMP/mountlist.txt
2154    CheckMountlist $MINDI_TMP/mountlist.txt
2155    mkdir -p $bigdir/tmp
2156    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2157    if [ _"$MONDO_SHARE" != _"" ]; then
2158        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2159    fi
2160    if [ $LVM != "false" ]; then
2161        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2162        if [ "$?" -ne "0" ]; then
2163            LVM="false"
2164            rm -f $bigdir/tmp/i-want-my-lvm
2165        else
2166            LogFile "Your i-want-my-lvm file content is:"
2167            LogFile "-----------------------------------"
2168            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2169            LogFile "-----------------------------------"
2170        fi
2171    fi
2172    LogFile "Your mountlist.txt file content is:"
2173    LogFile "-----------------------------------"
2174    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2175    LogFile "-----------------------------------"
2176
2177    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2178    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2179    if [ _"$MONDO_SHARE" != _"" ]; then
2180        for q in filelist.full.gz biggielist.txt ; do
2181            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2182            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2183        done
2184    fi
2185
2186    echo -en "Tarring and zipping the data content..."
2187    size_of_all_tools=`du -sk $bigdir | cut -f1`
2188    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $imagesdir/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2189    LogFile "Size of the data content"
2190    LogFile "------------------------"
2191    du -sk $imagesdir/*gz >> $LOGFILE
2192    LogFile "------------------------"
2193    echo -e "$DONE"
2194
2195    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2196    rm -rf $bigdir
2197    rm -f $needlist
2198}
2199
2200
2201ProcessLDD() {
2202    local incoming f d nd bd bnd
2203    read incoming
2204    while [ "$incoming" != "" ]; do
2205        # We take the full path name of the dyn. lib. we want
2206        incoming=`echo "$incoming" | $AWK '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
2207        for f in $incoming ; do
2208            # echo modified file name if one of the parent dir is a link
2209            # by replacing the original dirname by the destination of the link
2210            d="`dirname $f`"
2211            found="false"
2212            while [ "$d" != "/" ]; do
2213                if [ -h "$d" ]; then
2214                    nd=`readlink -f $d`
2215                    bd=`basename $d`
2216                    bnd=`basename $nd`
2217                    f=`echo $f | sed "s~/$bd/~/$bnd/~"`
2218                    echo $d
2219                fi
2220                d="`dirname $d`"
2221            done
2222
2223            echo "$f"
2224            echo "`ReadAllLink $f`"
2225        done
2226        read incoming
2227    done
2228}
2229
2230
2231Prompt() {
2232    echo -en "$1"
2233    read line
2234}
2235
2236
2237ReadLine() {
2238    local i incoming
2239    read incoming
2240    i=0
2241    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2242        i=$(($i+1))
2243        read incoming
2244    done
2245    echo "$incoming"
2246}
2247
2248
2249SizeOfPartition() {
2250    local devpath drive res stub
2251    device=$1
2252    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2253        Die "Cannot find $device's size - is your /etc/fstab sane?"
2254    fi
2255    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2256        res=`SizeOfRaidPartition $device`
2257        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2258        echo "$res"
2259        return 0
2260    fi
2261    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2262    res=`$FDISK -s $device 2>> $LOGFILE`
2263    # end patch
2264    # take only the first in case of multiple mount (cifs, nfs, ...)
2265    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2266    [ "$res" = "" ] && res="-1"
2267    echo $res
2268    return 0
2269}
2270
2271
2272SizeOfRaidPartition() {
2273    local real_dev smallest_size silly tmp
2274
2275    silly=999999999
2276    smallest_size=$silly
2277
2278    for real_dev in `GetRaidDevMembers $1` ; do
2279        tmp=`SizeOfPartition $real_dev`
2280        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2281    done
2282
2283    if [ "$smallest_size" = "$silly" ] ; then
2284        echo "-1"
2285        return 1
2286    else
2287        echo "$smallest_size"
2288        return 0
2289    fi
2290}
2291
2292
2293StripExecutable()
2294{
2295    local tmpfile
2296
2297    tmpfile=$MINDI_TMP/stripped.$$.dat
2298    [ -d "$1" ] || [ -h "$1" ] && return
2299    cp -f $1 $tmpfile 2>> $LOGFILE
2300    strip $tmpfile 2> /dev/null
2301    if [ "$?" -eq "0" ] ; then
2302        cp -f $tmpfile $1 2>> $LOGFILE
2303        LogFile "INFO: Stripped binary $2"
2304    fi
2305    rm -f $tmpfile
2306}
2307
2308KernelVer() {
2309        local fkern_ver fname
2310
2311        fname=$1
2312        file $fname | grep -q gzip
2313        if [ "$?" -eq "0" ] ; then
2314            # Used by ia64
2315            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2316        else
2317            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2318        fi
2319        echo "$fkern_ver"
2320}
2321
2322
2323# WARNING: This function should just echo the final result !!!
2324#
2325TryToFindKernelPath() {
2326    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2327
2328    we_want_version=$KERVERRUN
2329    possible_kernels=""
2330    duff_kernels=""
2331    output=""
2332   
2333    if [ "$ARCH" = "ia64" ] ; then
2334       root="/boot/efi/efi"
2335    else
2336       root="/"
2337    fi
2338    # See if we're booted from a Xen kernel
2339    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2340    if [ -f /proc/xen/capabilities ]; then
2341        # It's a Xen kernel
2342        KERNEL_IS_XEN="yes"
2343        LogFile "INFO: It's a Xen kernel..."
2344    fi
2345
2346    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2347        [ ! -e "$fname" ] && continue
2348        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2349        fkern_ver=`KernelVer $fname`
2350        [ "$fkern_ver" = "" ] && continue
2351        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2352        [ -f "$fname" ] || continue
2353        [ -h "$fname" ] && continue
2354        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2355        file $fname | grep -q gzip
2356        if [ "$?" -eq "0" ] ; then
2357            # Used by ia64
2358            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2359                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2360                duff_kernels="$fname $duff_kernels"
2361            else
2362                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2363                possible_kernels="$fname $possible_kernels"
2364            fi
2365        else
2366            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2367                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2368                duff_kernels="$fname $duff_kernels"
2369            else
2370                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2371                possible_kernels="$fname $possible_kernels"
2372            fi
2373        fi
2374    done
2375    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2376        possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2377    fi
2378    if [ ! "$possible_kernels" ] ; then
2379        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2380        possible_kernels="$duff_kernels"
2381        if [ ! "$possible_kernels" ] ; then
2382            LogAll "INFO: Sorry, no duff kernels either"
2383        else
2384            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2385            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2386        fi
2387    fi
2388    if [ $KERNEL_IS_XEN = "yes" ]; then
2389        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2390        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2391    fi
2392    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2393    noof_kernels=`CountItemsIn "$possible_kernels"`
2394    if [ "$noof_kernels" -eq "0" ] ; then
2395        LogAll "Could not find your kernel."
2396        if [ -e "/boot/vmlinuz" ] ; then
2397            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2398            output=/boot/vmlinuz
2399        else
2400            output=""
2401        fi
2402    elif [ "$noof_kernels" -eq "1" ] ; then
2403        kp=`echo "$possible_kernels" | sed s/' '//`
2404        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2405        output="$kp"
2406    else
2407        for i in $possible_kernels ; do
2408            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2409                LogAll "INFO: OK, I used my initiative and found that "
2410                LogAll "INFO: $i is probably your kernel. "
2411                output="$i"
2412                break
2413            fi
2414        done
2415        if [ ! -n "$output" ]; then
2416            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2417                output=/boot/vmlinuz
2418                LogFile "INFO: Schlomo, this one's for you."
2419            else
2420                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2421                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2422                LogFile "INFO: $possible_kernels"
2423                output=""
2424            fi
2425        fi
2426    fi
2427    if [ $KERNEL_IS_XEN = "yes" ]; then
2428        if [ "$noof_xenkernels" -eq "0" ]; then
2429            xenkernelpath=""
2430        elif [ "$noof_xenkernels" -eq "1" ]; then
2431            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2432            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2433        else
2434            for i in $possible_xenkernels ; do
2435                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2436                    LogFile "INFO: OK, I used my initiative and found that "
2437                    LogFile "INFO: $i is probably your Xen kernel. "
2438                    xenkernelpath="$i"
2439                    break
2440                fi
2441            done
2442            if [ ! -n "$xenkernelpath" ]; then
2443                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2444                if [ ! -n "$new_possible_xenkernels" ]; then
2445                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2446                    LogFile "INFO: Using $xenkernelpath"
2447                else
2448                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2449                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2450                    LogFile "INFO: $possible_xenkernels"
2451                    output=""
2452                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2453                    LogFile "INFO: Using $xenkernelpath"
2454                fi
2455            fi
2456        fi
2457        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2458            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2459        fi
2460    fi
2461    LogAll "TryToFindKernelPath found $output"
2462    echo "$output"
2463}
2464
2465
2466TurnTgzIntoRdz() {
2467    local tgz_dir_fname rdz_fname tempfile old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path d thelink
2468
2469    tgz_dir_fname=$1
2470    rdz_fname=$2
2471    kernelsize=$3
2472    maxsize=$(($BOOT_SIZE-$kernelsize))
2473    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2474    tempfile=$MINDI_TMP/temp.rd
2475    res=0
2476    echo -en "..."
2477    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2478    echo -en "..."
2479    LogFile "INFO: Creating ext2 filesystem on $tempfile"
2480    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2481    echo -en "..."
2482    mkdir -p $mountpoint
2483    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2484    echo -en "..."
2485    old_pwd=`pwd`
2486    cd "$mountpoint"
2487
2488    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2489    for d in bin sbin lib lib64; do
2490        if [ -h "/$d" ]; then
2491            thelink=`readlink /$d`
2492            mkdir -p $mountpoint/$thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2493            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2494            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2495                rmdir $mountpoint/$d
2496            fi
2497            if [ ! -h $mountpoint/$d ]; then
2498                rm -f $mountpoint/$d 2> /dev/null
2499                (cd $mountpoint ; ln -s $thelink $d) || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2500            fi
2501        fi
2502    done
2503    LogFile "INFO: what is now in $mountpoint"
2504    ls -alR $mountpoint >> $LOGFILE
2505   
2506    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2507    for f in $tgz_dir_fname/*; do 
2508        if [ ! -r $f ]; then
2509            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2510        else
2511            cp -Rdf $f . 2>&1 >> $LOGFILE
2512        fi
2513    done
2514    (cd etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2515    ln -sf usr/sbin/init linuxrc
2516
2517    cd dev || Die "Can't cd to dev"
2518    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2519    rm -f dev-entries.tgz
2520    cd ..
2521
2522    for w in insmod.static insmod.static.old ; do
2523        s=`which $w 2> /dev/null`
2524        if [ -e "$s" ] ; then
2525            tar cf - -C / $s 2> /dev/null | tar xf -
2526        fi
2527    done
2528
2529    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2530   
2531    # Copy of files mandatory for ssh to automate mount if sshfs is used
2532    mkdir $mountpoint/.ssh $mountpoint/tmp
2533    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2534    cat > $mountpoint/tmp/myssh << EOF
2535ssh -o StrictHostKeyChecking=no $*
2536EOF
2537    chmod 755 $mountpoint/tmp/myssh
2538
2539    # Copy of files mandatory for ld.so
2540    cp -a /etc/ld.so.c* $mountpoint/etc
2541
2542    # Handle the case where busybox and mount are dynamically linked
2543    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2544    if [ $? -eq 0 ]; then
2545        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2546        rm -f bin/mount
2547    fi
2548
2549    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf file (which includes all busybox deps)
2550    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2551    for f in `grep -v " *#.*" $DEPLIST_DIR/minimal.conf | sort -u`; do
2552        if [ -r $f ]; then
2553            echo $f >> $MINDI_TMP/minimal.lis
2554            LocateDeps $f >> $MINDI_TMP/minimal2.lis
2555        fi
2556    done
2557    for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
2558        mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2559    done
2560    # Initial / are trucated by tar
2561    finallist=""
2562    # Remove directories from the list, as tar/cp will create them anyway
2563    # and it may hurt if /lib is in it as on Debian/Ubuntu
2564    # recent bash says that -d is true for a link to a dir !
2565    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2566        if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2567            finallist="$finallist $f"
2568        fi
2569    done
2570    #tar cf - $finallist 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2571    echo "cp -a -n --parents $finallist -t $mountpoint" 2>&1 >> $MINDI_TMP/$$.log
2572    cp -a -n --parents $finallist -t $mountpoint 2>> $MINDI_TMP/$$.log || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2573
2574    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2575    ln -sf /bin/bash bin/sh
2576    LogIt "INFO: Using bash as default shell"
2577    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2578
2579    # Avoids an issue on some distro (RHEL5)
2580    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2581
2582    mkdir -p $mountpoint/tmp
2583    # Management of udev (which includes modprobe in rules)
2584    ps auxww | grep -v grep | grep -qw udevd
2585    if [ $? -eq 0 ]; then
2586        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2587        LogIt "INFO: udev device manager found"
2588        tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
2589        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2590        rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2591        # Do not do it if it's a link (Ubuntu 64 bits #503)
2592        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2593            tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
2594        fi
2595        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2596            tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
2597        fi
2598        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2599            tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
2600        fi
2601        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ]; then
2602            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2603            lis=""
2604            # Get only the files which exist in that list
2605            # and potentially their symlink structure
2606            for i in $lis2; do
2607                if [ -h $i ]; then
2608                    j=$i
2609                    while [ -h $j ]; do
2610                        lis="$lis $j"
2611                        j=`readlink -f $j`
2612                    done
2613                    lis="$lis $j"
2614                elif [ -f $i ]; then
2615                    lis="$lis $i"
2616                fi
2617            done
2618            # And their deps
2619            LocateDeps $lis > $MINDI_TMP/udev.lis
2620            for i in $lis; do
2621                if [ "`echo $i | cut -c1`" = "/" ]; then
2622                    j=`echo $i | cut -c2-`
2623                    [ "$j" != "" ] && rm -f $j
2624                fi
2625                echo "$i" >> $MINDI_TMP/udev.lis
2626            done
2627            finallist=""
2628            # Remove directories from the list, as tar/cp will create them anyway
2629            # and it may hurt if /lib is in it as on Debian/Ubuntu
2630            # recent bash says that -d is true for a link to a dir !
2631            for f in `sort -u $MINDI_TMP/udev.lis`; do
2632                if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2633                    finallist="$finallist $f"
2634                fi
2635            done
2636            #tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2637            echo "cp -a -n --parents $finallist -t $mountpoint/" 2>&1 >> $MINDI_TMP/$$.log
2638            cp -a -n --parents $finallist -t $mountpoint/ 2>> $MINDI_TMP/$$.log  || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2639            rm -f $MINDI_TMP/udev.lis
2640        else
2641            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2642            LogAll "         mindi will use static devices which may cause problems"
2643            rm -f $mountpoint/tmp/USE-UDEV
2644        fi
2645    fi
2646
2647    # Management of potential HW info (ProLiant only at the moment)
2648    rm -rf $MINDI_CACHE/bkphw
2649    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2650    if [ -d $MINDI_CACHE/bkphw ]; then
2651        LogIt "INFO: Hardware Information found and saved ..."
2652        cp -rp $MINDI_CACHE/bkphw .
2653        if [ -f $MINDI_CACHE/tools.files ]; then
2654            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2655            LocateDeps $lis > $MINDI_TMP/tools.lis
2656            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
2657        fi
2658        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2659            mv -f $MINDI_CACHE/mindi-rsthw .
2660            chmod 755 ./mindi-rsthw
2661        fi
2662        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2663    fi
2664
2665    # Management of perl scripts delivered needed at restore time
2666    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/bin/mr-* > $MINDI_TMP/perl.lis
2667    tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
2668
2669    for w in cdrom groovy-stuff ; do
2670        mkdir -p mnt/$w
2671    done
2672
2673    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
2674
2675    echo -en "..."
2676    cd /
2677
2678    needed_modules=""
2679    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2680
2681    if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
2682        # For PXE boot
2683        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2684    fi
2685    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2686        list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2687    fi
2688    for i in $DENY_MODS; do
2689        LogFile "INFO: Removing $i from the list of modules to load"
2690        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2691    done
2692
2693    if [ "${kernelname}" != "" ]; then
2694        needed_modules_path=lib/modules/${kernelname}
2695        mkgmopt="-k ${kernelname}"
2696    else
2697        needed_modules_path=lib/modules/$KERVERRUN
2698        mkgmopt="-k $KERVERRUN"
2699    fi
2700
2701    [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n         If you're not using a modular kernel then mindi won't probably work."
2702    needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2703
2704    LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2705    cp --parents -aL $needed_modules $mountpoint/ 2>> $MINDI_TMP/$$.log || LogIt "ERROR: Unable to copy modules to $mountpoint" $MINDI_TMP/$$.log
2706
2707    # Uncompress modules if not using udev and native modprobe
2708    if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2709        for i in $needed_modules; do
2710            if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2711                gunzip -f $mountpoint/$i
2712            fi
2713            if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2714                bunzip2 -f $mountpoint/$i
2715            fi
2716            if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2717                unxz -f $mountpoint/$i
2718            fi
2719            LogFile "INFO: Uncompressing $i"
2720        done
2721    fi
2722
2723    # Also copy modules.* in case of udev so that normal modprobe works
2724    tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
2725
2726    # Copy FW in case some drivers needs it
2727    for d in "/lib" "/usr/lib"; do
2728        if [ -d "$d/firmware" -a ! -h $d ]; then
2729            cp -a "$d/firmware" "$mountpoint/$d"
2730        fi
2731    done
2732
2733    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2734    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2735        if [ -d "$d/multipath" -a ! -h $d ]; then
2736            cp -a "$d/multipath" "$mountpoint/$d"
2737        fi
2738    done
2739
2740    # Copy an additional ProLiant tool for OBDR support
2741    if [ -f $MINDI_TMP/OBDR ]; then
2742        found=0
2743        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2744            mkdir -p $mountpoint/usr/bin
2745            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2746            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2747            found=1
2748        fi
2749        if [ -x /usr/bin/sg_wr_mode ]; then
2750            mkdir -p $mountpoint/usr/bin
2751            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2752            LocateDeps $lis > $MINDI_TMP/obdr.lis
2753            (cd $mountpoint ; tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $MINDI_TMP/$$.log)
2754            LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2755            found=1
2756        fi
2757        if [ $found -eq 0 ]; then
2758            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2759            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2760        fi
2761    fi
2762
2763    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2764        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2765        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2766        rm -f $mountpoint/sbin/devfsd
2767    fi
2768    cd "$old_pwd"
2769    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2770    if [ _"$MONDO_SHARE" != _"" ]; then
2771        MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2772        cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy mondo-restore.cfg to ramdisk"
2773        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2774        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2775        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2776        [ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2777        [ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2778        [ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2779        [ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2780    fi
2781    mkdir -p $mountpoint/proc
2782    LogFile "---------------------------"
2783    LogFile "Content of initial ramdisk:"
2784    LogFile "---------------------------"
2785    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2786    LogFile "---------------------------"
2787
2788    # Determine what filesystem to use for initrd image
2789    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2790    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2791    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2792    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2793        # say what will be used
2794        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2795        # kernel expects linuxrc in ext2 filesystem
2796        ( cd "$mountpoint" && ln -sf usr/sbin/init linuxrc )
2797        # unmount loop filesystem and create image file using the standard approach
2798        umount $mountpoint || Die "Cannot unmount $tempfile"
2799        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2800        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2801            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2802        else
2803            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2804        fi
2805        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2806        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2807        rm -f ${rdz_fname}.tmp
2808        # log that we are done
2809        LogFile "      ...done."
2810    elif [ "$gvFileSystem" = "initramfs" ]; then
2811        # say what will be used
2812        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2813        # make sure that cpio is there
2814        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2815        # go into filesystem
2816        cd "$mountpoint"
2817        # kernel expects init in cpio filesystem
2818        ln -sf sbin/init init
2819        # create cpio image file and unmount loop filesystem
2820        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2821        cd "$old_pwd"
2822        umount $mountpoint || Die "Cannot unmount $tempfile"
2823        # log that we are done
2824        LogFile "      ...done."
2825    else
2826        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2827    fi
2828
2829    if [ "$res" -eq "0" ] ; then
2830        echo -en "..."
2831    else
2832        echo -en "\rMade an rdz WITH ERRORS.           \n"
2833    fi
2834    return 0
2835}
2836
2837
2838##############################################################################
2839#----------------------------------- Main -----------------------------------#
2840##############################################################################
2841
2842# Now we can create what we need
2843mkdir -p $MINDI_TMP
2844
2845# Purge from potential old run
2846if [ _"$MINDI_CACHE" = _"" ]; then
2847    Die "MINDI_CACHE undefined"
2848fi
2849
2850# --nolog needs to be first, and is used in analyze-my-lvm
2851if [ "$1" = "--nolog" ] ; then
2852    shift
2853    LOGFILE=/dev/stderr
2854else
2855    > $LOGFILE
2856fi
2857if [ "$1" = "--printvar" ] ; then
2858    shift
2859    if [ _"$1" != _"" ] ; then
2860        set | grep -Ew "^$1" | cut -d= -f2
2861    fi
2862    exit 0
2863fi
2864
2865LogFile "mindi v$MINDI_VERSION"
2866LogFile "$ARCH architecture detected"
2867LogFile "mindi called with the following arguments:"
2868echo "$@">> $LOGFILE
2869LogFile "Start date : `date`"
2870LogFile "-----------------------------"
2871
2872[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2873
2874# Log some capital variables
2875[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2876[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2877LogFile "MONDO_SHARE = $MONDO_SHARE"
2878LogFile "MINDI_LIB = $MINDI_LIB"
2879LogFile "MINDI_SBIN = $MINDI_SBIN"
2880LogFile "MINDI_CONF = $MINDI_CONF"
2881if [ -f $MINDI_CONFIG ]; then
2882    LogFile "-----------------------------"
2883    LogFile " Mindi configuration file    "
2884    LogFile "-----------------------------"
2885    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2886    LogFile "-----------------------------"
2887fi
2888LogFile "In Mindi"
2889LogFile "--------"
2890LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2891LogFile "BOOT_SIZE = $BOOT_SIZE"
2892LogFile "--------"
2893
2894trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2895
2896# Sanity checks
2897which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2898which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2899which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2900which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2901if which awk &> /dev/null ; then
2902    if ! which gawk &> /dev/null ; then
2903        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2904    fi
2905fi
2906which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2907[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2908
2909[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2910
2911# Update the PATH variable if incomplete
2912if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2913    PATH=$PATH:/sbin:/usr/sbin
2914    export PATH
2915    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2916    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2917    LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
2918fi
2919
2920if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2921    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2922fi
2923
2924### TODO
2925### Fix as it's not mandatory on ia64
2926if [ "$ARCH" = "ia64" ] ; then
2927    if which elilo &> /dev/null ; then
2928        LILO_EXE=elilo
2929    else
2930        LILO_EXE=`which false 2> /dev/null`
2931    fi
2932else
2933    FindIsolinuxBinary
2934fi
2935trap "Aborted" SIGTERM
2936DONE="\r\t\t\t\t\t\t\t\tDone.         "
2937kernelpath=""
2938MONDO_ROOT=/var/cache/mondo
2939mkdir -p $MONDO_ROOT
2940
2941if [ -d "/proc/lvm" ]; then
2942    # LVM v1
2943    LVMCMD=""
2944    LVM="v1"
2945elif [ -d "/dev/mapper" ]; then
2946    # LVM v2
2947    LVMCMD="lvm"
2948    LVM="v2"
2949else
2950    LVM="false"
2951fi
2952
2953if [ -e "/proc/cmdline" ]; then
2954    CMDLINE="/proc/cmdline"
2955elif [ -e "/tmp/cmdline" ]; then
2956    CMDLINE="/tmp/cmdline"
2957else
2958    CMDLINE="/dev/null"
2959fi
2960
2961LogFile "INFO: LVM set to $LVM"
2962LogFile "----------"
2963LogFile "mount result:"
2964LogFile "-------------"
2965mount >> $LOGFILE
2966if [ -e /etc/raidtab ]; then
2967    LogFile "-------------"
2968    LogFile "/etc/raidtab content:"
2969    LogFile "-------------"
2970    cat /etc/raidtab >> $LOGFILE
2971else
2972    LogFile "No file /etc/raidtab"
2973fi
2974if [ -e /etc/mdadm.conf ]; then
2975    LogFile "-------------"
2976    LogFile "/etc/mdadm.conf content:"
2977    LogFile "-------------"
2978    cat /etc/mdadm.conf >> $LOGFILE
2979else
2980    LogFile "-------------"
2981    LogFile "No file /etc/mdadm.conf"
2982fi
2983LogFile "-------------"
2984LogFile "cat $CMDLINE"
2985LogFile "-------------"
2986cat $CMDLINE >> $LOGFILE
2987LogFile "-------------"
2988LogFile "cat /proc/swaps:"
2989LogFile "-------------"
2990cat /proc/swaps >> $LOGFILE
2991LogFile "-------------"
2992if [ -e /proc/mdstat ]; then
2993    LogFile "cat /proc/mdstat:"
2994    LogFile "-------------"
2995    cat /proc/mdstat >> $LOGFILE
2996else
2997    LogFile "No pseudo file /proc/mdstat"
2998fi
2999LogFile "-------------"
3000LogFile "cat /proc/partitions:"
3001LogFile "-------------"
3002cat /proc/partitions >> $LOGFILE
3003LogFile "-------------"
3004LogFile "cat /proc/filesystems:"
3005LogFile "-------------"
3006cat /proc/filesystems >> $LOGFILE
3007LogFile "-------------"
3008LogFile "lsmod result:"
3009LogFile "-------------"
3010lsmod >> $LOGFILE
3011MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3012if [ -x /usr/sbin/esxcfg-module ]; then
3013    LogFile "-------------"
3014    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3015    LogFile "-------------"
3016    LogFile "VMWare modules"
3017    LogFile "-------------"
3018    /usr/sbin/esxcfg-module -l >> $LOGFILE
3019    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3020fi
3021LogFile "-------------" 
3022LogFile "FORCE_MODS:"
3023LogFile "-------------"
3024LogFile "$FORCE_MODS"
3025LogFile "-------------"
3026LogFile "DENY_MODS:"
3027LogFile "-------------"
3028LogFile "$DENY_MODS"
3029LogFile "-------------"
3030LogFile "df result:"
3031LogFile "----------"
3032df -aT >> $LOGFILE
3033LogFile "-------------"
3034LogFile "df -i result:"
3035LogFile "----------"
3036df -i >> $LOGFILE
3037LogFile "-------------"
3038if [ -r /boot/grub/menu.lst ]; then
3039    LogFile "-------------"
3040    LogFile "INFO: /boot/grub/menu.lst content"
3041    LogFile "-------------"
3042    cat /boot/grub/menu.lst >> $LOGFILE
3043    LogFile "-------------"
3044fi
3045if [ -r /boot/grub/grub.conf ]; then
3046    LogFile "-------------"
3047    LogFile "INFO: /boot/grub/grub.conf content"
3048    LogFile "-------------"
3049    cat /boot/grub/grub.conf >> $LOGFILE
3050    LogFile "-------------"
3051fi
3052if [ -r /boot/grub/grub.cfg ]; then
3053    LogFile "-------------"
3054    LogFile "INFO: /boot/grub/grub.cfg content"
3055    LogFile "-------------"
3056    cat /boot/grub/grub.cfg >> $LOGFILE
3057    LogFile "-------------"
3058fi
3059if [ -r /boot/grub/device.map ]; then
3060    LogFile "-------------"
3061    LogFile "INFO: /boot/grub/device.map content"
3062    LogFile "-------------"
3063    cat /boot/grub/device.map >> $LOGFILE
3064    LogFile "-------------"
3065fi
3066if [ -r /etc/lilo.conf ]; then
3067    LogFile "-------------"
3068    LogFile "INFO: /etc/lilo.conf content"
3069    LogFile "-------------"
3070    cat /etc/lilo.conf >> $LOGFILE
3071fi
3072LogFile "Full fdisk info"
3073LogFile "---------------"
3074$FDISK -l >> $LOGFILE
3075LogFile "----------------"
3076LogFile "List of extra modules is:"
3077LogFile "$EXTRA_MODS"
3078LogFile "-------------"
3079
3080# Compute libata version
3081laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3082# If libata v2 is used then remove ide-generic as it will perturbate boot
3083if [ "`echo $MODULES | grep libata`" ]; then
3084    if [ "$laver" = "2" ]; then
3085        DENY_MODS="$DENY_MODS ide-generic"
3086        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3087        LogFile "-------------"
3088    fi
3089fi
3090
3091# Check for McAfee which disturbs the access to some files (tgz in articular)
3092if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3093    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3094    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3095    LogFile "WARNING: You have two options:"
3096    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3097    LogFile "WARNING:  - Disable the scanner during the backup"
3098fi
3099
3100# Check for ISO_CMD command
3101if [ ! -x $ISO_CMD ]; then
3102    LogFile "NOTE: No CD image (ISO file) utility found"
3103fi
3104
3105FLOPPY_WAS_MOUNTED=""
3106for mtpt in /media/floppy /mnt/floppy /floppy ; do
3107    if mount | grep -w $mtpt &> /dev/null ; then
3108        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3109        umount $mtpt
3110    fi
3111done
3112
3113#
3114# If we have a USB device we need to store info
3115# and remove it from the parameters line
3116#
3117if [ "$#" -ne "0" ] ; then
3118    if [ "$1" = "--usb" ] ; then
3119        shift
3120        USBDEVICE=$1
3121        if [ _"$USBDEVICE" = _"" ]; then
3122            Die "No USB device specified"
3123        fi
3124        shift
3125    fi
3126fi
3127
3128if [ "$#" -ne "0" ] ; then
3129    if [ "$1" = "--findkernel" ] ; then
3130        resk=`TryToFindKernelPath`
3131        # Avoids logfile content for mondo
3132        export MONDO_SHARE=""
3133        if [ "$resk" = "" ] ; then
3134            if [ $KERNEL_IS_XEN = "yes" ]; then
3135                echo "$xenkernelpath"
3136                LogFile "INFO: xenkernelpath = $xenkernelpath"
3137                MindiExit 0
3138            else
3139                MindiExit -1
3140            fi
3141        else
3142            echo "$resk"
3143            LogFile "INFO: kernelpath = $resk"
3144            MindiExit 0
3145        fi
3146    elif [ "$1" = "--locatedeps" ] ; then
3147        [ ! "$2" ] && Die "Please specify the binary to look at"
3148        LocateDeps $*
3149        # Avoids logfile content for mondo
3150        export MONDO_SHARE=""
3151        MindiExit $?
3152    elif [ "$1" = "--readalllink" ] ; then
3153        [ ! "$2" ] && Die "Please specify the binary to look at"
3154        # Avoids logfile content for mondo
3155        export MONDO_SHARE=""
3156        mr-read-all-link $2
3157        MindiExit $?
3158    elif [ "$1" = "--makemessage" ] ; then
3159        MakeMessageFile | cut -c1-80
3160        MindiExit 0
3161    elif [ "$1" = "--makemountlist" ] ; then
3162        [ ! "$2" ] && Die "Please specify the output file"
3163        MakeMountlist $2
3164        CheckMountlist $2
3165        # Avoids logfile content for mondo
3166        export MONDO_SHARE=""
3167        MindiExit $?
3168    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3169        echo "Mindi v$MINDI_VERSION"
3170        # Avoids logfile content for mondo
3171        export MONDO_SHARE=""
3172        MindiExit 0
3173    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3174        MONDO_TMP=$2
3175        # Change MINDI_TMP for the one provided by mondo
3176        # So that it can get back the built files
3177        if [ _"$MONDO_TMP" = _"" ]; then
3178            Die "MONDO_TMP is empty, aborting"
3179        fi
3180        if [ _"$MONDO_TMP" = _"/" ]; then
3181            Die "MONDO_TMP is /, aborting"
3182        fi
3183        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3184        rmdir $MINDI_TMP
3185        export MINDI_TMP=$MONDO_TMP
3186        mkdir -p $MINDI_TMP
3187
3188        # This is the scratch dir in mondo - subdir images
3189        MINDI_CACHE=$3
3190
3191        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3192        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3193       
3194###
3195### Sq-Modification...
3196### Attempt to locate kernel specific module path
3197### if module path is found then use it other wise use uname -r to set it...
3198###
3199        if [ $KERNEL_IS_XEN = "yes" ]; then
3200            LogAll "INFO: xenkernelpath = $xenkernelpath"
3201        fi
3202        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3203        if [ ! -d "/lib/modules/$kernelname" ]; then
3204           LogAll "WARNING: Module path for ${kernelpath} not found..."
3205           LogAll "         using running kernel\'s modules."
3206           kernelname=$KERVERRUN
3207        else
3208           LogAll "Using modules for kernel: ${kernelname}"
3209        fi
3210        LogAll "INFO: kernelname = $kernelname"
3211        LogAll "INFO: kernelpath = $kernelpath"
3212###
3213### end of Sq-Modification
3214###
3215        TAPEDEV=$5
3216        TAPESIZE=$6
3217        FILES_IN_FILELIST=$7
3218        USE_LZO=$8
3219        CDRECOVERY=$9
3220        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3221            IMAGE_DEVS=""
3222        else
3223            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3224        fi
3225        if [ "${11}" ] ; then
3226            LILO_OPTIONS=""
3227    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3228        fi
3229        LAST_FILELIST_NUMBER=${12}
3230        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3231        export MINDI_EXCLUDE_DEVS="${14}"
3232        USE_COMP="${15}"
3233        USE_LILO="${16}"
3234        USE_STAR="${17}"
3235        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3236        DIFFERENTIAL="${19}"
3237        USE_GZIP="${20}"
3238        NOT_BOOT="${21}"
3239        [ "$USE_COMP" = "" ] && USE_COMP=yes
3240        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3241        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3242        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3243        # MONDO_ROOT is the real scratchdir
3244        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3245        if [ _"$MONDO_ROOT" != _"" ]; then
3246            mkdir -p $MONDO_ROOT
3247        else
3248            Die "MONDO_ROOT is undefined"
3249        fi
3250    else
3251        LogScreen "Syntax: mindi (--custom ....)"
3252        MindiExit -1
3253    fi
3254fi
3255
3256if [ _"$MINDI_CACHE" != _"" ]; then
3257    rm -rf $MINDI_CACHE/* 2> /dev/null
3258    mkdir -p $MINDI_CACHE
3259fi
3260
3261[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3262
3263if [ _"$MONDO_SHARE" = _"" ]; then
3264    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3265    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3266    LogIt "BusyBox sources are available from http://www.busybox.net"
3267    LogIt "------------------------------------------------------------------------------"
3268else
3269    LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
3270fi
3271if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3272    LogIt "Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3273else
3274    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3275    MindiExit -1
3276fi
3277
3278for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3279    modinfo $i 2> /dev/null 1> /dev/null
3280    if [ $? -eq 0 ]; then
3281        modprobe $i 2>&1 > /dev/null
3282    fi
3283done
3284
3285KERN_DISK_MADE=""
3286
3287LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3288LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3289LogFile "NOT_BOOT = '$NOT_BOOT'"
3290if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3291    LogIt "INFO: Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
3292    MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
3293    MakeMountlist $MINDI_TMP/mountlist.txt
3294    CheckMountlist $MINDI_TMP/mountlist.txt
3295    mkdir -p $MINDI_TMP/small-all/tmp
3296    cd "$MINDI_TMP/small-all"
3297    cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3298    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3299    sleep 2
3300    LogIt "Done. Exiting."
3301    MindiExit 0
3302fi
3303
3304if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3305    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3306fi
3307
3308if [ "$kernelpath" = "" ] ; then
3309    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3310    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3311    read ch
3312    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3313        USE_OWN_KERNEL="yes"
3314    else
3315        USE_OWN_KERNEL="no"
3316    fi
3317    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3318        kernelpath=`TryToFindKernelPath`
3319        if [ "$kernelpath" = "" ] ; then
3320            echo -n "Please enter kernel path : "
3321            read kernelpath
3322        fi
3323    fi
3324fi
3325
3326echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3327[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3328
3329mountpoint=$MINDI_TMP/mountpoint.$$
3330PrepareDataDiskImages
3331
3332ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3333rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3334export ramdisk_size=$rds
3335
3336LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3337if [ "$ARCH" = "ia64" ] ; then
3338    PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
3339else
3340    PrepareBootDiskImage_ISOLINUX $kernelpath || Die "Failed to create $ramdisk_size KB disk image."
3341fi
3342
3343[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3344...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3345
3346if [ _"$MONDO_SHARE" = _"" ]; then
3347    ListImagesForUser
3348    OfferToMakeBootableISO
3349    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3350        OfferToMakeBootableUSB
3351    fi
3352    LogAll "Finished."
3353elif [ "$TAPEDEV" ] ; then
3354    if [ "$ARCH" != "ia64" ] ; then
3355        # We need to keep the img file as boot file for ia64 platform
3356        rm -f $MINDI_CACHE/{*img,*iso}
3357    else
3358        rm -f $MINDI_CACHE/*iso
3359    fi
3360    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3361        OfferToMakeBootableUSB
3362    fi
3363    OfferToMakeBootableISO
3364    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3365        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3366    else
3367        Die "Cannot find all.tar.gz, to be written to tape"
3368    fi
3369elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3370    OfferToMakeBootableUSB
3371else
3372    OfferToMakeBootableISO
3373fi
3374# cleanup
3375LogAll "INFO: $FRIENDLY_OUTSTRING"
3376for mtpt in $FLOPPY_WAS_MOUNTED ; do
3377    mount $mtpt
3378done
3379MindiExit 0
Note: See TracBrowser for help on using the repository browser.