source: MondoRescue/branches/3.2/mindi/mindi@ 3199

Last change on this file since 3199 was 3199, checked in by Bruno Cornec, 11 years ago
  • Fix #724 by adding ehci-pci support in ISB_MODS
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 124.2 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3199 2013-10-15 19:48:35Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38# Temporary directory for mindi
39TMPDIR=/tmp
40
41EXTRA_SPACE=120000 # increase if you run out of ramdisk space
42BOOT_SIZE=65600 # size of the boot disk
43
44PROMPT_MAKE_CD_IMAGE="yes"
45 # Ask if you want to make a CD Image to be written?
46 # if this is set to 'no', then the image will be created automatically
47
48PROMPT_MAKE_USB_IMAGE="yes"
49 # Ask if you want to make a USB Image to be written?
50 # if this is set to 'no', then the image will be created automatically
51
52USE_OWN_KERNEL="yes"
53 # If set to "no", you will be prompted for whether or not
54 # you want to use your own kernel, or the supplied default.
55 # If "yes" mindi will automatically use your own kernel.
56
57KERNEL_IS_XEN="no"
58 # If set to "no", the kernel is not a Xen kernel
59 # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
60xenkernelpath=""
61
62MY_FSTAB=/etc/fstab
63TAPE_MODS="ht st osst ide-tape ide_tape"
64SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 libcxgbi iscsi_boot_sysfs iscsi_target_mod iscsi_tcp libiscsi libiscsi2 scsi_transport_iscsi scsi_transport_iscsi2 libiscsi_tcp uio isp megaraid megaraid_mm megaraid_mbox megaraid_sas mega_sr mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qla2xxx_conf qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod scsi_transport_sas scsi_transport_spi scsi_transport_fc sd_mod crc_t10dif crc-t10dif seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule scsi_dh scsi_tgt emcpdm emcpgpx emcpmpx emcp scsi_dh_emc scsi_dh_alua dc395x diskdumplib scsi_dump_register arcmsr"
65
66# ide-probe-mod
67IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs ide-core ide_core ide-gd_mod ide_gd_mod edd paride ata_generic ide_pci_generic ata_piix libata dock via82cxxx generic nvidia ahci libahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw blkbk virtio virtio_ring virtio_pci virtio_blk virtio_balloon"
68PCMCIA_MODS="pcmcia_core ds yenta_socket"
69USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_common usb-common usb_storage input hid hid_generic uhci_hcd ehci-hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci-hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev libusual scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
70NET_MODS="auth_rpcgss sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 cnic be2net 8021q bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 libphy pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse crc32c libcrc32c netbk xenblktap r8169 virtio_net via_rhine garp lzo lzo_decompress lzo_compress ipv6 ptp_pch"
71CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660 vfat fat"
72# Those modules will only go on the backup media, not the boot media.
73EXTRA_MODS="$CDROM_MODS loop md-mod linear raid0 raid1 xor raid10 raid5 raid456 raid6_pq async_raid6_recov async_pq xor async_tx async_memcpy async_xor lvm-mod dm-mod dm_mod dm-snapshot dm_snapshot dm-zero dm_zero dm-mirror dm_mirror dm-multipath dm-round-robin dm-emc dm-hp-sw dm-rdac dm-region-hash dm-snapshot dm-log multipath jfs xfs btrfs zlib_deflate xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache ext4 jbd2 crc16 ocfs2 ocfs2_dlm ocfs2_nodemanager configfs vxodm vxgms vxglm gab llt dmpaa vxspec vxio vxdmp vxportal fdd vxfs "
74# Replace with that line for HP OCMP e.g.
75#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
76DENY_MODS="kqemu vxfen"
77# Force some modules to be included
78FORCE_MODS=""
79
80# Find MBR in case of bootable USB device to build
81MBRFILE=/usr/lib/syslinux/mbr.bin
82[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
83[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
84[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
85[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
86
87LOGFILE=/var/log/mindi.log
88BOOT_MEDIA_MESSAGE="\
89To format and restore all files automatically, type '0enuke07' <enter>.\n\
90To restore some/all files interactively, type '0einteractive07' <enter>.\n\
91To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
92To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
93\n\
94You may add one or more parameters as well as per the function keys below\n\
95e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
96\n\
97If restoring from a local external disk or USB key, do not connect it \n\
98until the boot-up has finished.\n\
99\n\
100\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
101"
102FDISK=$MINDI_SBIN/parted2fdisk
103
104# Using a config file allow to overwrite some values
105MINDI_CONFIG="$MINDI_CONF/mindi.conf"
106if [ -f $MINDI_CONFIG ]; then
107 . $MINDI_CONFIG
108fi
109DEPLIST_FILE="$MINDI_CONF/deplist.txt"
110DEPLIST_DIR="$MINDI_CONF/deplist.d"
111
112ISO_CMD="/usr/bin/mkisofs"
113ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
114
115# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
116# However, they use exactly the same command line parameters, so just
117# use genisoimage if it's available.
118if [ ! -x $ISO_CMD ]; then
119 ISO_CMD=/usr/bin/genisoimage
120fi
121
122
123# Function to log on screen only
124LogScreen() {
125 if [ -e /dev/stderr ] ; then
126 echo -e "$1" >> /dev/stderr
127 elif [ -e /usr/bin/logger ] ; then
128 /usr/bin/logger -s $1
129 fi
130}
131
132# Function to log in log file only
133LogFile() {
134
135 echo -e "$1" >> $LOGFILE
136 if [ _"$2" != _"" ]; then
137 grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
138 fi
139 rm -f "$2"
140}
141
142# Function to log in both screen and logfile
143LogAll() {
144 LogScreen "$1"
145 LogFile "$1" "$2"
146}
147
148# Preserved for compatibility
149LogIt() {
150 LogAll "$1" "$2"
151}
152
153# Last function called before exiting
154# Parameter is exit code value
155# Should be declared here as used immediately below potentialy
156MindiExit() {
157 LogFile "Mindi $MINDI_VERSION is exiting"
158 LogFile "End date : `date`"
159 if [ _"$MONDO_SHARE" != _"" ] ; then
160 echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
161 if [ -f $LOGFILE ]; then
162 cat $LOGFILE >> /var/log/mondoarchive.log
163 else
164 echo "No LOGFILE available in that mindi run" >> /var/log/mondoarchive.log
165 fi
166 echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
167 fi
168
169 cd /
170 sync&
171
172 # Clean temporary files only when standalone mindi
173 if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
174 rm -Rf $MINDI_TMP
175 fi
176 exit $1
177}
178
179Die() {
180 local i
181 if [ "$1" = "" ] ; then
182 LogAll "FATAL ERROR"
183 else
184 LogAll "FATAL ERROR. $1"
185 fi
186 if [ _"$2" != _"" ]; then
187 grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
188 fi
189 rm -f "$2"
190
191 LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
192 LogAll "See http://www.mondorescue.org for more information."
193 LogAll "WE CANNOT HELP unless you enclose that file.\n"
194 MindiExit -1
195}
196
197# Now we can create what we need
198MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
199if [ $? -ne 0 ]; then
200 df $TMPDIR
201 Die "Unable to create a temporary directory ! Check space on $TMPDIR"
202fi
203if [ _"$MINDI_TMP" = _"" ]; then
204 Die "MINDI_TMP is empty, aborting"
205fi
206if [ _"$MINDI_TMP" = _"/" ]; then
207 Die "MINDI_TMP is /, aborting"
208fi
209export MINDI_TMP
210
211# ----------------------------------------------------------------------------
212
213
214AbortHere() {
215 [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
216 Die "Program is terminating in response to signal received from OS/user"
217}
218
219
220Aborted() {
221 trap SIGHUP SIGTERM SIGTRAP SIGINT
222 [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
223 [ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
224 Die "User abort."
225}
226
227
228AddFileToCfgIfExists() {
229 [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
230}
231
232
233AddKeyboardMappingFile() {
234 local mappath r included_list included_item i res ii sss
235 mappath=$1
236 KBDEPTH=$(($KBDEPTH+1))
237 [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
238 if [ -e "$bigdir/$mappath" ] ; then
239 LogFile "INFO: $mappath already added"
240 return
241 elif [ -d "$bigdir/$mappath" ] ; then
242 echo "Cannot add $mappath: it's a directory. Sorry."
243 return
244 fi
245 LogFile "INFO: Added kbd map $mappath"
246 if [ ! -e "$mappath" ] ; then
247 mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
248 if [ ! -e "$mappath" ] ; then
249 LogAll "WARNING: Cannot add $mappath: kbd map file not found"
250 return
251 fi
252 else
253 echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
254 fi
255
256 tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
257 if [ "`echo $mappath | grep -F ".gz"`" ] ; then
258 included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
259 else
260 included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
261 fi
262 for included_item in $included_list ; do
263 if [ ! -e "$included_item" ] ; then
264 sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
265 [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
266 for ii in $sss ; do
267 [ -e "$ii" ] && AddKeyboardMappingFile $ii
268 done
269 else
270 AddKeyboardMappingFile $included_item
271 fi
272 done
273}
274
275
276CopyDependenciesToDirectory() {
277 local outdir incoming counter d found tdir
278 outdir=$1
279 mkdir -p $outdir
280 incoming=`ReadLine`
281 counter=0
282 while [ "$incoming" != "" ] ; do
283 # Non absolute file names should not arrive till here => skipped
284 if [ `echo "$incoming" | cut -c1` != '/' ]; then
285 LogAll "WARNING: Unable to handle $incoming"
286 incoming=`ReadLine`
287 continue
288 fi
289 # no parent directory of incoming should be a link, copy is not possible in that case
290 d=`dirname "$incoming"`
291 found="false"
292 while [ $d != "/" -a $found = "false" ]; do
293 [ -h "$d" ] && found="true"
294 d=`dirname "$d"`
295 done
296 if [ -d "$incoming" -a ! -h "$incoming" ]; then
297 find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
298 elif [ -e "$incoming" ] && [ $found = "false" ]; then
299 if [ ! -h "$incoming" ]; then
300 tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
301 else
302 tdir=`dirname "$incoming"`
303 if [ ! -e "$outdir/$tdir" ]; then
304 mkdir -p "$outdir/$tdir"
305 fi
306 cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
307 fi
308 # Only uncompress modules if not using udevd
309 if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
310 gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
311 fi
312 [ -x "$outdir" ] && StripExecutable $outdir
313 counter=$(($counter+1))
314 LogProgress $counter $2
315 fi
316 incoming=`ReadLine`
317 done
318}
319
320
321CountItemsIn() {
322 local r
323 r=0
324 for q in $1 ; do
325 r=$(($r+1))
326 done
327 echo $r
328}
329
330
331DropOptimizedLibraries() {
332 local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
333 filelist=$1
334 outdir=$2
335
336 list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
337 if [ "$list_of_optimized_libraries" = "" ] ; then
338 return 0
339 fi
340 echo -en "Dropping i686-optimized libraries if appropriate"
341 for optimized_lib_name in $list_of_optimized_libraries ; do
342 echo -en "."
343 reason=""
344 vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
345 echo "$vanilla_lib_name" >> $filelist
346 LogFile "INFO: Adding $vanilla_lib_name to filelist"
347 mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
348 rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
349
350 # This may return multiple files
351 for resolved in `ReadAllLink $vanilla_lib_name`; do
352 LogFile "INFO: Adding as deps $resolved to filelist"
353 vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
354 if [ "$vanilla_resolved_name" != "$resolved" ]; then
355 mkdir -p $outdir$resolved> /dev/null 2> /dev/null
356 rmdir $outdir$resolved > /dev/null 2> /dev/null
357 ln -sf $vanilla_resolved_name $outdir$resolved
358 LogFile "INFO: Excluding deps $resolved"
359 grep -Fvx "$resolved" "$filelist" > $filelist.tmp
360 LogFile "INFO: Replacing it with $vanilla_resolved_name"
361 echo "$vanilla_resolved_name" >> $filelist.tmp
362 mv -f $filelist.tmp $filelist
363 fi
364 done
365 done
366 $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
367 mv -f $filelist.tmp $filelist
368 echo -e "$DONE"
369}
370
371
372FindAndAddUserKeyboardMappingFile() {
373 local r res mapfile mappath included_item included_list keyfile mp locale
374 LogAll "INFO: Analyzing your keyboard's configuration."
375 KEYDIR=/lib/kbd
376 [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
377 [ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
378 [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
379 [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
380 [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
381 [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
382 if [ ! -e "$KEYDIR" ] ; then
383 LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
384 return 0
385 fi
386 if [ -e "/etc/sysconfig/keyboard" ] ; then
387 LogFile "INFO: Red Hat-style config detected."
388 keyfile=/etc/sysconfig/keyboard
389 elif [ -e "/etc/rc.d/rc.keymap" ] ; then
390 LogFile "INFO: Slackware-style config detected."
391 keyfile=/etc/rc.d/rc.keymap
392 elif [ -e "/etc/rc.config" ] ; then
393 LogFile "INFO: Debian-style config detected."
394 keyfile=/etc/rc.config
395 elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
396 LogFile "INFO: Debian-style config detected."
397 mkdir -p $bigdir/tmp
398 echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
399 KBDEPTH=0
400 mkdir -p $bigdir/etc/console
401 cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
402 echo ""
403 echo -e "$DONE"
404 return 0
405 elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
406 LogFile "INFO: Ubuntu-style config detected."
407 mkdir -p $bigdir/tmp
408 if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
409 kbdfile="/etc/console-setup/boottime.kmap.gz"
410 else
411 kbdfile="/etc/console-setup/cached.kmap.gz"
412 fi
413 echo $kbdfile > $bigdir/tmp/KEYMAP-LIVES-HERE
414 KBDEPTH=0
415 mkdir -p $bigdir/etc/console-setup
416 cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
417 echo ""
418 echo -e "$DONE"
419 return 0
420 elif [ -e "/etc/rc.conf" ] ; then
421 LogFile "INFO: ArchLinux config detected."
422 keyfile=/etc/rc.conf
423 elif [ -e "/etc/conf.d/keymaps" ] ; then
424 LogFile "INFO: Gentoo-style config detected."
425 keyfile=/etc/conf.d/keymaps
426 elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
427 LogFile "INFO: X11-style config detected."
428 keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
429 else
430 LogFile "Searching for rc.config ..."
431 keyfile=`find /etc -name rc.config | head -n1`
432 if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
433 LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
434 return
435 else
436 LogFile "INFO: Found $keyfile"
437 fi
438 fi
439 if [ ! -e "$KEYDIR/keymaps" ] ; then
440 LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
441 return
442 fi
443 LogFile "INFO: keyfile=$keyfile"
444 # For SLES we need to remove the .map.gz extension Cf #614
445 locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
446 [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'` # Slackware
447 [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2` # Gentoo & ArchLinux
448 [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'` # Fedora 19
449 LogFile "INFO: locale=$locale"
450 #
451 # Process the keymaps dir once for all
452 # AddKeyboardMappingFile will use it recursively
453 #
454 find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
455 mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
456 [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
457 # If we have multiple keymaps then log it !!
458 echo "$mp" | grep -q " " >> $LOGFILE
459 if [ $? -eq 0 ]; then
460 LogAll "WARNING: Multiple keymaps found: $mp"
461 LogFile "INFO: The following one will be used"
462 fi
463 for i in $mp ; do
464 mappath=$i
465 [ -e "$i" ] && [ ! -d "$i" ] && break
466 done
467 if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
468 mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
469 fi
470 LogFile "INFO: mappath = $mappath"
471 if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
472 LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
473 return
474 fi
475 LogAll "INFO: Adding the following keyboard mapping tables: "
476 mkdir -p $bigdir/tmp
477 echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
478 KBDEPTH=0
479 AddKeyboardMappingFile $mappath
480 echo ""
481 echo -e "$DONE"
482 rm -f $MINDI_TMP/keymaps.find
483 return 0
484}
485
486
487FindMboot32Binary() {
488 MBOOTC32=/usr/lib/syslinux/mboot.c32
489 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/mboot.c32
490 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
491 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
492 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
493 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
494 [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
495 [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
496 LogFile "INFO: Found mboot.c32 at $MBOOTC32"
497}
498
499FindIsolinuxBinary() {
500 ISOLINUX=/usr/lib/isolinux.bin
501 [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
502 [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
503 [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
504 [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
505 [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
506 [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
507 [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
508 LogFile "INFO: Found isolinux.bin at $ISOLINUX"
509}
510
511
512FindSpecificModuleInPath() {
513 local modpaths pwd line
514 pwd=`pwd`
515 if [ "$YOUR_KERNEL_SUCKS" ] ; then
516 cd "$MINDI_TMP"
517 else
518 cd /
519 fi
520 if [ ! -e "$1" ] ; then
521 LogAll "WARNING: cannot search specific path '$1'"
522 return 1
523 fi
524 # Find all files and links (required for some VMWare VMs)
525 modpaths=`find "$1" -name $2.*o -o -name $2.o.gz -o -name $2.ko.gz -o -name $2.ko.xz -o -name $2 -type f -o -type l`
526 echo "$modpaths"
527 cd "$pwd"
528}
529
530
531GenerateGiantDependencyList() {
532 local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
533
534 echo -en "Analyzing dependency requirements"
535 outfile=$1
536 tempfile=$MINDI_TMP/$$.txt
537 incoming=`ReadLine`
538
539 > $tempfile
540 progress=0
541 res=0
542 noof_lines=$2
543 while [ "$incoming" != "" ] ; do
544 if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
545 incoming=`ReadLine`
546 continue
547 fi
548 if [ "$incoming" = "LVMFILES:" ] ; then
549 break
550 fi
551 filelist=`GenerateListForFile "$incoming"`
552 r=$?
553 [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
554 res=$(($res+$r))
555# LogFile "INFO: '$incoming' generates filelist '$filelist'"
556 for fname in $filelist ; do
557 [ "$fname" != "" ] && echo "$fname" >> $tempfile
558 done
559 progress=$(($progress+1))
560 LogProgress $progress $noof_lines
561 incoming=`ReadLine`
562 done
563 if [ "$incoming" = "LVMFILES:" ] ; then
564 incoming=`ReadLine`
565 lvmversion=""
566 while [ "$incoming" != "" ] ; do
567 if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
568 incoming=`ReadLine`
569 continue
570 fi
571 filelist=`GenerateListForFile "$incoming"`
572 for tool in $filelist ; do
573 lvmresolved=`readlink -f $tool`
574 if [ "$tool" = "$lvmresolved" ]; then
575 echo "$tool" >> $tempfile
576 elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
577 if [ "$lvmversion" = "" ] ; then
578 lvmversion=`$lvmresolved`
579 echo "$lvmresolved" >> $tempfile
580 fi
581 toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
582 if [ "$lvmversion" = "200" ]; then
583 # pvdata and lvmcreate_initrd don't exist in LVM2
584 case "$toolstripped" in
585 "pvdata")
586 continue
587 ;;
588 "lvmcreate_initrd")
589 continue
590 ;;
591 esac
592 fi
593 toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
594 if [ -e "$toolpath" ] ; then
595 echo "$toolpath" >> $tempfile
596 echo "$tool" >> $tempfile
597 else
598 toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
599 fi
600 if [ -e "$toolpath" ] ; then
601 echo "$toolpath" >> $tempfile
602 echo "$tool" >> $tempfile
603 else
604 echo "Where are your LVM-Tools? Couldn't find $tool"
605 fi
606 else
607 echo "$tool" >> $tempfile
608 fi
609 done
610 progress=$(($progress+1))
611 LogProgress $progress $noof_lines
612 incoming=`ReadLine`
613 done
614 fi
615 echo -en "$DONE\nMaking complete dependency list"
616
617 tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
618 mv -f $tempfile.new $tempfile
619 > $outfile.pre
620 progress=0
621 noof_lines=`cat $tempfile | wc -l`
622 LogFile "---------------------------------"
623 LogFile "List of dependencies: "
624 LogFile "---------------------------------"
625 for fname in `cat $tempfile` ; do
626 echo "$fname" | tee -a $LOGFILE >> $outfile.pre
627 LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
628 progress=$(($progress+1))
629 LogProgress $progress $noof_lines
630 done
631 if [ _"$MONDO_SHARE" != _"" ]; then
632 mkdir -p $bigdir/tmp
633 mkdir -p $bigdir/usr/bin
634 if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
635 LogAll "\nINFO: Incorporating post-nuke tarball"
636 old_pwd=`pwd`
637 cd "$bigdir"
638 tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
639 cd "$old_pwd"
640 fi
641 if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
642 LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
643 else
644 LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
645 LogIt " I bet you've got a spare copy of Mondo or Mindi floating around on your system."
646 LogIt " If Mindi was called by Mondo then send me a bug report."
647 LogIt " It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
648 LogIt " Finally, run Mindi again."
649 Die "Odd."
650 fi
651 cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
652 if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
653 LogAll "\nINFO: Incorporating Network-related settings"
654 for r in NETFS-* ISO-PREFIX ; do
655 cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
656 LogFile "INFO: Copying $r to ramdisk"
657 done
658 fi
659 fi
660 tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
661 rm -f $tempfile $outfile.pre
662 [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
663 return $res
664}
665
666
667GenerateListForFile() {
668 local files_found loc fname incoming i res
669 incoming="$1"
670 files_found=""
671 res=0
672
673 for fname in $incoming ; do
674 files_found="$files_found `LocateFile $fname`"
675 done
676
677 echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
678}
679
680
681# Returns all disk devices which are part of a raid array
682GetAllRaidMembers() {
683 $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
684}
685
686
687GetFileSizeList() {
688 local i
689 for i in `find $1 -type d -o -print` ; do
690 du -sk $i
691 done
692}
693
694
695# Check kernel filesystem capabilites for accessing initrd image
696# Could be ext2 FS (old mode) or initramfs (new mode)
697#
698# Interface definition:
699# param #1: absolute path to kernel image
700GetInitrdFilesystemToUse() {
701
702 # interface test: make sure we have one parameter
703 if [ $# -ne 1 ]; then
704 Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
705 fi
706
707 # interface parameters
708 local lvKernelImage=$1
709
710 # local constants (filesystem magic strings)
711 local lcMagicCramfs="<3>cramfs: wrong magic"
712 local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
713 local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
714 local lcMagicInitfs="<6>checking if image is initramfs...|[<]6[>]Unpacking initramfs...|<6>Trying to unpack rootfs image as initramfs"
715
716 # local variables
717 local lvOffset
718 local lvScanRes
719 local lvUseFilesystem
720
721 # say where we are.
722 LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
723
724 # verify that file exists
725 [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
726
727 # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
728 file $lvKernelImage 2>&1 | grep -q gzip
729 if [ $? -eq 0 ]; then
730 LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
731 lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
732 else
733 LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
734 # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
735 # get offet of gzip magic "1f8b0800" in file (for these older kernels)
736 lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
737 if [ $lvOffset -eq 0 ]; then
738 LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
739 lvScanRes=$lcMagicInitfs
740 else
741 lvOffset=`expr $lvOffset / 2`
742 LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
743 # scan again kernel image
744 lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
745 fi
746 fi
747
748 # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
749 if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
750 lvUseFilesystem="ext2fs"
751 elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
752 lvUseFilesystem="ext3fs"
753 elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
754 lvUseFilesystem="initramfs"
755 elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
756 lvUseFilesystem="cramfs"
757 else
758 # In that case, we are most probably after 2.6.30 and use the supported initramfs
759 LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
760 LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
761 LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
762 lvUseFilesystem="initramfs"
763 fi
764
765 # say what we are using
766 LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
767
768 # return file system to use
769 echo "$lvUseFilesystem"
770
771}
772
773# Searches members of raid device
774# $1: raid device (/dev/md...)
775GetRaidDevMembers() {
776 if [ ! -f /etc/raidtab ]; then
777 return
778 fi
779 $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
780}
781
782
783HackPathsToFailsafe() {
784 local incoming newpath stub i pwd
785 incoming=`ReadLine`
786 pwd=`pwd`
787 cd "$MINDI_TMP"
788 while [ "$incoming" != "" ] ; do
789 stub=`basename $incoming`
790 newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
791 for i in $newpath ; do
792 echo "$i"
793 done
794 read incoming
795 done
796 cd "$pwd"
797}
798
799
800ListAllPartitions() {
801 local res currline partition all_partitions ap_orig remaining i j
802
803 grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
804 [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
805 if [ -e "/vmfs/volumes" ]; then
806 # For VMWare ESX 3 get the device names of these volumes
807 vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
808 fi
809 return
810}
811
812
813ListImagesForUser() {
814 local path fname
815 path=$MINDI_CACHE
816 echo -en "In the directory '$path' you will find the images:-\n"
817 for fname in `ls $path | grep -F mindi-` ; do
818 printf "%19s " $fname
819 done
820 echo " "
821}
822
823
824ListKernelModulePaths() {
825 local module_list module fname r kern
826 module_list="$MODULES"
827 # Remove unwanted modules from list
828 for i in $DENY_MODS; do
829 module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
830 EXTRA_MODS=`echo ${EXTRA_MODS} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
831 done
832###
833### Sq-Modification ... Use kernelname for module search path if specified
834###
835 if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
836 then
837 kern=${kernelname}
838 else
839 kern="$KERVERRUN"
840 fi
841 export KERVER=$kern
842###
843### Sq-Mod End
844###
845 # Get rid of duplicates, so that if a live kernel module also appears
846 # in $EXTRA_MODS that it won't get reported as "live module file not found" twice.
847 for module in `echo $module_list $EXTRA_MODS | tr ' ' '\n' | sort -u` ; do
848 r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
849 if [ -z "$r" ]; then
850 if [ "`echo "$MODULES" | grep -w $module`" ]; then
851 r="[live module file not found]"
852 else
853 r="[extra module file not found]"
854 fi
855 else
856 [ -f "$r" ] && echo "$r"
857 fi
858 LogFile "INFO: module $module --> $r"
859 done
860 find /lib/modules/$kern/modules.* -type f 2> /dev/null
861}
862
863#
864# Critical function which computes all dependencies (dyn. lib.)
865# for a list of binaries
866#
867LocateDeps() {
868 local incoming fname deps
869 incoming="$*"
870 for fname in $incoming ; do
871 if [ ! -e "$fname" ] ; then
872 LogFile "WARNING: $fname does not exist; cannot be LDD'd."
873 if echo $fname | grep lvm &> /dev/null ; then
874 LogFile " This warning only affects you if you are using LVM."
875 if echo "$MODULES" | grep lvm &> /dev/null ; then
876 LogFile " I think you are, so please take heed!"
877 else
878 LogFile " I don't think you are, so don't worry about it."
879 fi
880 fi
881 elif [ -h "$fname" ] && [ -x "$fname" ] ; then
882 newf=`readlink -f $fname`
883 LogFile "INFO: $fname is softlink to $newf which deps will be analyzed"
884 ldd $newf 2> /dev/null | ProcessLDD
885 else
886 ldd $fname 2> /dev/null | ProcessLDD
887 fi
888 done
889}
890
891
892# Give all symlinks recursively of a full path name
893ReadAllLink() {
894 file="$1"
895
896 while [ `echo $file | grep -Ec '\.\./'` -ne 0 ]; do
897 # We need to normalise the path with .. in it
898 file=`echo $file | perl -pi -e 's|([^/]*)/([^/]+)/\.\./([^/]+)|$1/$3|g'`
899 done
900 echo "$file"
901 if [ ! -h $file ]; then
902 return 0
903 fi
904
905 link=`readlink $file`
906 d=`dirname $file`
907 # Is link a relative or full path name
908 fchar=`echo $link | cut -c1`
909 # If mother dir is a link print it
910 if [ -h "$d" ]; then
911 echo "$d"
912 d2=`readlink $d`
913 c2=`echo $d2 | cut -c1`
914 if [ "$c2" != "/" ]; then
915 if [ "$c2" != "." ]; then
916 d="/$d2"
917 else
918 d="$d/$d2"
919 fi
920 fi
921 fi
922 if [ "$fchar" != "/" ]; then
923 # Relative or local link
924 ReadAllLink "$d/$link"
925 else
926 # Absolute path
927 ReadAllLink $link
928 fi
929}
930
931
932LocateFile() {
933 local i path fname_to_find location output resolved tmp stub cache_id loclist
934 fname_to_find="$1"
935 # It's an absolute path
936 if echo "$fname_to_find" | grep -x "/.*" ; then
937 output="$fname_to_find"
938 if [ -h "$output" ] ; then
939 output="`ReadAllLink $output` $output"
940 fi
941 echo "$output"
942 return 0
943 fi
944 # It's not an absolute path
945 output=""
946 for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
947 #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
948 [ -h "$path" ] && continue
949 [ ! -e "$path/$fname_to_find" ] && continue
950 output="$path/$fname_to_find $output"
951 if [ -h "$path/$fname_to_find" ] ; then
952 output="`ReadAllLink $path/$fname_to_find` $output"
953 fi
954 done
955 if [ "$output" = "" ] ; then
956 return 1
957 fi
958 echo "$output"
959 return 0
960}
961
962LogProgress() {
963 local i progress modres noof_lines
964
965 progress=$1
966 noof_lines=$2
967
968 echo -en "\r\t\t\t\t\t\t\t\t"
969 i=$(($progress*100))
970 if [ $noof_lines -ne 0 ]; then
971 i=$(($i/$noof_lines))
972 else
973 i=0
974 fi
975 echo -en "$i"
976 echo -en "%"
977 modres=$(($progress%4))
978 [ "$modres" -eq "0" ] && echo -en "\t/"
979 [ "$modres" -eq "1" ] && echo -en "\t-"
980 [ "$modres" -eq "2" ] && echo -en "\t\\"
981 [ "$modres" -eq "3" ] && echo -en "\t|"
982}
983
984# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
985MakeMondoConfigFile() {
986 local outfile use_lzo use_comp use_star
987 outfile=$1
988 > $outfile
989 [ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
990 [ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
991 [ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
992 [ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
993 [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
994 [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
995 use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
996 use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
997 use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
998 use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
999 use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
1000 echo "use-lzo $use_lzo" >> $outfile
1001 echo "use-gzip $use_gzip" >> $outfile
1002 echo "use-star $use_star" >> $outfile
1003 echo "use-lzma $use_lzma" >> $outfile
1004 echo "use-comp $use_comp" >> $outfile
1005 echo "datestamp `date`" >> $outfile
1006 [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
1007 AddFileToCfgIfExists $MINDI_TMP/NETFS-DEV netfs-dev $outfile
1008 AddFileToCfgIfExists $MINDI_TMP/NETFS-PROTO netfs-proto $outfile
1009 AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-IPADDR netfs-client-ipaddr $outfile
1010 AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-NETMASK netfs-client-netmask $outfile
1011 AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-BROADCAST netfs-client-broadcast $outfile
1012 AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-HWADDR netfs-client-hwaddr $outfile
1013 AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-DEFGW netfs-client-defgw $outfile
1014 AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-MOUNT netfs-server-mount $outfile
1015 AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-USER netfs-server-user $outfile
1016 AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-PATH netfs-server-path $outfile
1017 AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-IPADDR netfs-server-ipaddr $outfile
1018 AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
1019 AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
1020 AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
1021 AddFileToCfgIfExists $MINDI_TMP/ISODIR isodir $outfile
1022 AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1023 AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
1024 AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER bootloader.ver $outfile
1025 AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
1026 AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1027 AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1028 AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
1029 AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
1030 AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
1031 AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
1032}
1033
1034# Get PV's for an LV
1035GetPVsForLV() {
1036 if [ -n "$1" ]; then
1037 vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1038 if [ -z "$vg" ]; then
1039 return
1040 fi
1041 $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1042 fi
1043}
1044
1045
1046MakeMountlist() {
1047 local mountlist all_partitions current_partition \
1048partition_size partition_format outstring partition_number \
1049partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1050absolute_partition old_partition_fmt current_lvolume uname skip
1051
1052 LogFile "------------------------------------"
1053 LogFile "Your raw fstab file looks like this:"
1054 LogFile "------------------------------------"
1055 cat $MY_FSTAB >> $LOGFILE
1056 LogAll "-----------------------------------"
1057 LogAll "Your mountlist will look like this:"
1058 LogAll "-----------------------------------"
1059
1060# mountlist(OUT)
1061 mountlist=$1
1062
1063# NB: partition = device
1064# NB: mountpt = where the device is mounted
1065
1066 [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1067
1068 [ "$mountlist" != "" ] && rm -Rf $mountlist
1069 > $mountlist
1070 all_partitions=""
1071
1072 if [ $LVM != "false" ]; then
1073 LogAll "INFO: Analyzing LVM..."
1074 $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1075 if [ $? -ne 0 ]; then
1076 LVM="false"
1077 fi
1078 # Excluded LVs and GVs are not reported here
1079 all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1080 fi
1081 all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1082 for i in $IMAGE_DEVS ; do
1083 mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1084 done
1085 [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1086 printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1087 printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------ ------- ---------- | tee -a $LOGFILE
1088 useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1089 for c_p in $all_partitions ; do
1090 # Skip fd/cd devices, network FS, cifs
1091 [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1092 [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1093 if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1094 current_partition=`readlink -f $c_p`
1095 if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1096 current_partition="$c_p"
1097 elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1098 # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1099 current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1100 fi
1101 [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1102 else
1103 current_partition="$c_p"
1104 fi
1105 [ "$c_p" = "none" ] && continue
1106 redhat_label=""
1107 label=""
1108 uuid=""
1109 absolute_partition=`readlink -f $c_p`
1110 partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1111
1112 # set default in case we dont't find it
1113 str_to_find_fmt_with=$current_partition
1114
1115 # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1116 # current_partition contains only first column of /etc/fstab
1117 if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1118 redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1119 actual_dev=""
1120
1121 # 1st try, findfs - the RHEL way of finding labels and their partitions
1122 if [ -x "/sbin/findfs" ]; then
1123 actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1124 fi
1125
1126 # 2nd try : blkid, the good way for all LABEL except swap
1127 if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1128 actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1129 # For LVM FS it will give a /dev/dm-# which should then be converted
1130 if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1131 major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1132 minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1133 for dev in `ls /dev/mapper/*`; do
1134 major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1135 minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1136 if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1137 actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1138 break
1139 fi
1140 done
1141 fi
1142 fi
1143
1144 # 3rd try, which works on a standard partition (ext2/3), but not on swap
1145 # For LVM gives a /dev/mapper entry
1146 if [ "x$actual_dev" = "x" ]; then
1147 actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1148 fi
1149
1150 # 4th try, with vol_id
1151 # SWAP only
1152 if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1153 list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1154 for dev_swap in $list_swaps ; do
1155 dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1156 if [ "x$dev_exists" != "x" ]; then
1157 actual_dev=$dev_swap
1158 break;
1159 fi
1160 done
1161 fi
1162
1163 # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1164 # LABEL=SW-cciss/c0d0p3 (RDP)
1165 # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1166 # SWAP only
1167 if [ "x$actual_dev" = "x" -a _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1168 skip=""
1169 uname=$KERVERRUN
1170 [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1171 # 2.6.12 needs 16 (FC3)
1172 [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1173 # 2.6.19 and upper needs 1052
1174 [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1175 [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1176 [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1177 if [ $skip = "" ]; then
1178 Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1179 fi
1180 for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1181 do
1182 # Location of the swap label for kernel 2.6
1183 try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1184 if [ "x$try_dev_label" = "x$redhat_label" ]; then
1185 actual_dev=$try_dev
1186 fi
1187 done
1188 fi
1189
1190 # Check if one of all those tries has known success
1191 if [ "x$actual_dev" != "x" ]; then
1192 current_partition=$actual_dev
1193 else
1194 Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1195 fi
1196 # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1197 # current_partition contains only first column of /etc/fstab
1198 elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1199 uuid=`echo "$current_partition" | cut -d'=' -f2`
1200 actual_dev=""
1201
1202 # 1st try, findfs - the RHEL way of finding labels and their partitions
1203 if [ -x "/sbin/findfs" ]; then
1204 actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1205 fi
1206
1207 # 2nd try : blkid, the good way for all UUID except swap
1208 if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1209 actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1210 # For LVM FS it will give a /dev/dm-# which should then be converted
1211 if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1212 major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1213 minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1214 for dev in `ls /dev/mapper/*`; do
1215 major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1216 minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1217 if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1218 actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1219 break
1220 fi
1221 done
1222 fi
1223 fi
1224
1225 # 3th try, with vol_id
1226 if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1227 list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1228 for dev in $list_dev ; do
1229 dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1230 if [ "x$dev_exists" != "x" ]; then
1231 actual_dev=$dev
1232 break;
1233 fi
1234 done
1235 fi
1236
1237 # 4th try, with dumpuuid (VMWare only ?) for swap
1238 if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1239 list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1240 for dev in $list_dev ; do
1241 dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1242 if [ "x$dev_exists" != "x" ]; then
1243 actual_dev=$dev
1244 break;
1245 fi
1246 done
1247 fi
1248
1249 # Check if one of all those tries has known success
1250 if [ "x$actual_dev" != "x" ]; then
1251 current_partition=$actual_dev
1252 else
1253 Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1254 fi
1255 else
1256 # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1257 # they use symlinks in fstab unrelated to what is shown in mount !
1258 if [ _"$partition_mountpt" = _"" ]; then
1259 # set default in case we dont't find it
1260 for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1261 if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1262 str_to_find_fmt_with=$tmpp
1263 partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1264 break;
1265 fi
1266 done
1267 fi
1268 fi
1269
1270 # Detects noauto partitions not mounted and exclude them
1271 partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1272 if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" = "" ] ; then
1273 LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1274 continue
1275 fi
1276 # Detects bind partitions and exclude them
1277 if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1278 LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1279 continue
1280 fi
1281
1282 # Look for devices which have to be excluded
1283 skip=0
1284 if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1285 l=""
1286 list_of_devices="`ReadAllLink $current_partition`"
1287 for d in $list_of_devices; do
1288 l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1289 done
1290
1291 # Remove PVs from LVs excluded
1292 l="$l `GetPVsForLV $current_partition`"
1293
1294 # We want a single unique list
1295 list_of_devices="`echo $l | sort -u`"
1296
1297 for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1298 if [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1299 LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1300 skip=1
1301 continue
1302 fi
1303 done
1304 fi
1305 if [ $skip -eq 1 ]; then
1306 continue
1307 fi
1308
1309 partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1310 # Detects iso9660 ISO images and exclude them
1311 if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1312 LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1313 continue
1314 fi
1315 # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1316 # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1317 # the former is then a link to the latter, so we test whether
1318 # $current_partition is actually such a link or not and set
1319 # $current_lvolume accordingly. On Debian you may find more than one answer
1320 # so we remove the one corresponding to /dev/.static
1321 # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1322 # principle is the same and we need to find the link to it as well.
1323 # Note that $current_lvolume may well be an
1324 # ordinary device. It is just to make sure that we feed the right value
1325 # into any of the LVM tools if possible.
1326
1327 current_lvolume="$current_partition"
1328 if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1329 # .static dir are a Debian specificity
1330 current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1331 echo $current_lvolume | grep -q ' '
1332 if [ $? -eq 0 ]; then
1333 LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1334 fi
1335 # if it's not found, it may well be a real device such as a multipath one
1336 # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1337 if [ _"$current_lvolume" = _"" ]; then
1338 current_lvolume="$current_partition"
1339 fi
1340 fi
1341 #
1342 # End of LVM device style variation code (other than $current_lvolume).
1343
1344 if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1345 # Size computed via LVM not directly
1346 partition_size="lvm"
1347 else
1348 [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1349 [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1350 if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1351 # Skip swap files
1352 [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1353 partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1354 [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1355 [ "$partition_format" != "swap" ] && partition_format="swap"
1356 if [ "$partition_size" = "" ] ; then
1357 totalsize=0
1358 items=0
1359 for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1360 totalsize=$(($totalsize+$i))
1361 items=$(($items+1))
1362 done
1363 [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1364 [ "$partition_size" -lt "125000" ] && partition_size=125000
1365 LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1366 fi
1367 else
1368 partition_size=`SizeOfPartition $current_partition`
1369 fi
1370 fi
1371 [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1372 [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1373 if [ "$partition_mountpt" = "" ] ; then
1374 if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1375 if [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1376 partition_mountpt="raid"
1377 partition_format="raid"
1378 else
1379 partition_mountpt="lvm"
1380 partition_format="lvm"
1381 fi
1382 fi
1383 fi
1384 psz=$partition_size
1385 LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1386 [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1387 if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1388 partition_mountpt="image"
1389 old_partition_fmt=$partition_format
1390 partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1391 partition_size=$(($partition_size+1)); # just in case
1392 if [ "$partition_format" = "Linux" ] ; then
1393 LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1394 LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1395 partition_format=$old_partition_fmt
1396 fi
1397 fi
1398
1399 if [ ! "$partition_mountpt" ] ; then
1400 LogFile "------- $FDISK -l $qq log ------------"
1401 for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1402 partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1403 [ "$partition_format" ] && break
1404 done
1405 LogFile "------- $FDISK log end ------------"
1406 if [ "$partition_format" = "Compaq diagnostics" ] ; then
1407 partition_format="compaq"
1408 elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1409 LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1410 continue
1411 fi
1412 fi
1413 if [ "$redhat_label" ]; then
1414 label="$redhat_label"
1415 elif [ "$uuid" ]; then
1416 label="$uuid"
1417 fi
1418 partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1419 [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1420 unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1421 if [ "$current_partition" = "" ] ; then
1422 LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1423 elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1424 if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1425 partition_mountpt=raid
1426 partition_format=raid
1427 printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1428 printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1429 else
1430 LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1431 fi
1432 elif [ "$partition_format" = "" ] ; then
1433 LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1434 elif [ "$partition_size" = "" ] ; then
1435 LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1436 elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1437 continue
1438 else
1439 if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1440 LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1441 partition_format="vfat"
1442 fi
1443 printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1444 printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1445 fi
1446 done
1447 LogAll "-----------------------------------"
1448}
1449
1450CheckMountlist() {
1451 local file=$1
1452 # Coherency verification
1453 ML01=`cat $file | wc -l`
1454 ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1455 ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1456 ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1457 if [ "$ML01" -ne "$ML1" ]; then
1458 LogFile "--------------------------------------------"
1459 LogAll "WARNING: Duplicate device entry in mountlist"
1460 LogFile "--------------------------------------------"
1461 fi
1462 if [ "$ML02" -ne "$ML2" ]; then
1463 LogFile "--------------------------------------------"
1464 LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1465 LogFile "------------------------------------------------"
1466 fi
1467}
1468
1469OfferToMakeBootableISO() {
1470 local i old_pwd
1471 if [ -z "$ISO_CMD" ]; then
1472 LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1473 return
1474 fi
1475 if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1476 echo -en "Shall I make a bootable CD image? (y/[n]) "
1477 read i
1478 [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1479 fi
1480 rm -Rf $MINDI_TMP/iso
1481 mkdir -p $MINDI_TMP/iso/{images,archives}
1482 LogFile "INFO: mindi_lib = $MINDI_LIB"
1483 cp -f $MINDI_CACHE/{*.gz,*.img} $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1484 for i in memdisk memtest.bin memtest.img ; do
1485 j=$MINDI_LIB/$i
1486 k=$MINDI_TMP/iso
1487 if [ -e "$j" ] ; then
1488 LogAll "INFO: Copying $j to $k"
1489 cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1490 cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1491 if [ _"$MONDO_SHARE" != _"" ]; then
1492 cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1493 fi
1494 fi
1495 done
1496 MakeMessageFile $MINDI_TMP/iso | cut -c1-80 > $MINDI_TMP/iso/message.txt
1497 if [ $KERNEL_IS_XEN = "yes" ]; then
1498 cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1499 cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32 2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1500 fi
1501 cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1502 cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1503
1504 if [ _"$MONDO_SHARE" != _"" ]; then
1505 if [ $KERNEL_IS_XEN = "yes" ]; then
1506 cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1507 cp $MBOOTC32 $MONDO_ROOT/mboot.c32 2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1508 fi
1509 cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1510 cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1511 fi
1512 MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1513 if [ "$ARCH" != "ia64" ] ; then
1514 cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1515 fi
1516 old_pwd=`pwd`
1517 cd "$MINDI_TMP/iso"
1518 if [ "$ARCH" != "ia64" ] ; then
1519 if [ _"$MONDO_SHARE" != _"" ]; then
1520 cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1521 if [ $KERNEL_IS_XEN = "yes" ]; then
1522 cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1523 fi
1524 cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1525 fi
1526 $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1527 else
1528 $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1529 fi
1530 if [ "$?" -ne "0" ] ; then
1531 LogFile "----------- $ISO_CMD's errors --------------"
1532 LogAll "$ISO_CMD returned the following errors:"
1533 cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1534 LogAll "ERROR: Failed to create ISO image."
1535 else
1536 LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1537 fi
1538 rm -f $MINDI_TMP/mkisofs.log
1539 cd "$old_pwd"
1540}
1541
1542
1543OfferToMakeBootableUSB() {
1544 local i
1545 if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1546 echo -n "Shall I make a bootable USB device ? (y/[n]) "
1547 read i
1548 [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1549 if [ "$USBDEVICE" = "" ]; then
1550 echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1551 read dev
1552 USBDEVICE=$dev
1553 fi
1554 echo "WARNING: This will erase all content on $USBDEVICE"
1555 echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1556 read i
1557 [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1558 fi
1559 rm -Rf $MINDI_TMP/usb
1560 mkdir -p $MINDI_TMP/usb
1561 USBPART="${USBDEVICE}1"
1562
1563 echo -en "Transforming $USBDEVICE in a Bootable device "
1564 echo -en "."
1565 LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1566 LogFile "INFO: Checking $USBDEVICE"
1567 $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1568 if [ $? -ne 0 ]; then
1569 LogAll "ERROR: Unable to access $USBDEVICE"
1570 LogAll " Make sure your USB device is plugged in"
1571 MindiExit -1
1572 fi
1573 echo -en "."
1574 # Some distro do auto mount at that point (Ubuntu)
1575 LogFile "INFO: Unmounting $USBPART just in case"
1576 umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1577 # If your key has no MBR it may cause an issue
1578 # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1579 if [ -r $MBRFILE ]; then
1580 LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1581 dd if=$MBRFILE of=$USBDEVICE
1582 else
1583 LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1584 LogAll " on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1585 fi
1586 LogFile "INFO: Preparing $USBDEVICE"
1587 cat > $MINDI_TMP/fdisk.txt << EOF
1588d
1589d
1590d
1591d
1592n
1593p
15941
1595
1596
1597t
1598b
1599a
16001
1601w
1602EOF
1603 $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1604 if [ $? -ne 0 ]; then
1605 LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1606 LogAll " Make sure your USB device is plugged in"
1607 $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1608 MindiExit -1
1609 fi
1610 LogFile "fdisk build file"
1611 LogFile "----------------"
1612 cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1613 LogFile "----------------"
1614 rm -f $MINDI_TMP/fdisk.txt
1615 LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1616 $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1617 echo -en "."
1618 # Calling kpartx in case devices were not created
1619 if [ -x "/sbin/kpartx" ]; then
1620 /sbin/kpartx -a $USBDEVICE
1621 fi
1622 # Some distro do auto mount at that point (Ubuntu)
1623 LogFile "INFO: Unmounting $USBPART just in case again"
1624 umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1625 echo -en "."
1626 # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1627 if [ "`which dmsetup`" != "" ]; then
1628 block_id="`echo $USBPART | sed 's|/dev/||g'`"
1629 if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1630 LogFile "INFO: Removing $block_id from device mapper."
1631 sleep 1
1632 dmsetup remove $block_id
1633 fi
1634 fi
1635 echo -en "."
1636 LogFile "INFO: Creating a vfat filesystem on $USBPART"
1637 mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1638 if [ $? -ne 0 ]; then
1639 LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1640 LogAll " Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1641 $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1642 MindiExit -1
1643 fi
1644 echo -en "."
1645 LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1646 mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1647 if [ $? -ne 0 ]; then
1648 LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1649 LogAll " Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1650 $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1651 MindiExit -1
1652 fi
1653 echo -en "."
1654 mkdir -p $MINDI_TMP/usb/images
1655 cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1656 echo -en "."
1657 LogFile "INFO: mindi_lib = $MINDI_LIB"
1658 for i in memdisk memtest.bin memtest.img ; do
1659 j=$MINDI_LIB/$i
1660 k=$MINDI_TMP/usb
1661 if [ -e "$j" ] ; then
1662 LogIt "INFO: Copying $j to $k"
1663 cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1664 cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1665 fi
1666 done
1667 echo -en "."
1668 MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1669 echo -en "."
1670 cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1671 echo -en "."
1672 cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1673 echo -en "."
1674 MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1675 echo -en "."
1676 LogAll "----------- syslinux's conf --------------"
1677 cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1678 LogAll "------------------------------------------"
1679 umount $MINDI_TMP/usb
1680 if [ "$ARCH" != "ia64" ] ; then
1681 syslinux -v 2>&1 | grep -q 4.02
1682 if [ $? -eq 0 ]; then
1683 # This buggy version of syslinux requires a call to --stupid and not -s
1684 syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1685 res=$?
1686 else
1687 syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1688 res=$?
1689 fi
1690 if [ $res -ne 0 ] ; then
1691 LogAll "----------- syslinux's errors --------------"
1692 cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1693 LogAll "------------------------------------------"
1694 LogIt "ERROR: Failed to create USB image."
1695 else
1696 echo -e "$DONE"
1697 LogFile "INFO: Created bootable USB image on $USBDEVICE"
1698 fi
1699 rm -f $MINDI_TMP/syslinux.log
1700 else
1701 LogAll "ERROR: No USB boot support for ia64"
1702 MindiExit -1
1703 fi
1704}
1705
1706
1707MakeMessageFile() {
1708
1709 if [ -x "/bin/lsb_release" ]; then
1710 DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1711 elif [ -r /etc/arch-release ]; then # this code must be written before /etc/issue test to avoid errors
1712 DESC="Arch Linux"
1713 if [ -r /var/log/pacman.log ]; then
1714 # there are no releases but we can get the last system upgrade
1715 # Output example: Arch Linux [2011-03-03 01:39]
1716 DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1717 fi
1718 elif [ -r /etc/issue.net ]; then
1719 DESC=`head -1 /etc/issue.net`
1720 elif [ -r /etc/issue ]; then
1721 DESC=`head -1 /etc/issue`
1722 elif [ -x "/usr/bin/pbdistrocheck" ]; then
1723 # For pb >= 0.9.8
1724 DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4`
1725 else
1726 DESC="Unknown desc"
1727 fi
1728 sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1729 if [ _"$MONDO_SHARE" != _"" ]; then
1730 if [ "$CDRECOVERY" != "yes" ] ; then
1731 if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1732 echo -en "Press <enter> to continue.\n"
1733 elif [ ! "$MINDI_TMP" ] ; then
1734 echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1735 if [ -e "$MINDI_LIB/memtest.img" ] ; then
1736 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1737 fi
1738 else
1739 echo -en "$BOOT_MEDIA_MESSAGE"
1740 fi
1741 else
1742 echo -en "\
1743To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1744CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1745 fi
1746 fi
1747
1748 # Also create the other help screens
1749 head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1750 head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1751 head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1752}
1753
1754
1755MakeBootConfFile() {
1756 local options i ooo
1757 options=""
1758 # Type of boot file (elilo or syslinux/isolinux)
1759 type=$1
1760 if [ "$type" = "elilo" ]; then
1761 sep="="
1762 else
1763 sep=" "
1764 fi
1765
1766 # Generic header for conf file
1767 if [ "$type" != "elilo" ] ; then
1768 echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1769 else
1770 echo -en "prompt\n"
1771 fi
1772
1773 # Compute which default option to boot from
1774 if [ "$CDRECOVERY" = "yes" ] ; then
1775 echo -en "default${sep}RESTORE\n"
1776 # In case it's mondoarchive
1777 elif [ _"$MONDO_SHARE" != _"" ]; then
1778 if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1779 echo -en "default${sep}iso\n"
1780 else
1781 echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
1782 fi
1783 else
1784 echo -en "default${sep}expert\n"
1785 fi
1786
1787 # Handle timeout
1788 if [ "$CDRECOVERY" != "yes" ] ; then
1789 echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1790 else
1791 echo -en "timeout${sep}10000\n"
1792 fi
1793 echo -en "\n"
1794
1795 # prepare which labels will be generated
1796 if [ "$CDRECOVERY" = "yes" ] ; then
1797 options="RESTORE expert"
1798 else
1799 if [ _"$MONDO_SHARE" != _"" ]; then
1800 options="interactive expert compare iso nuke isonuke"
1801 else
1802 options="expert"
1803 fi
1804 fi
1805
1806 # Generate rest of conf file
1807 for i in $options ; do
1808 ooo=$i
1809 [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1810 if [ "$type" = "elilo" ]; then
1811 outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1812 else
1813 ps="/"
1814 if [ "$type" = "syslinux" ]; then
1815 ps=""
1816 fi
1817 if [ $KERNEL_IS_XEN = "no" ]; then
1818 outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1819 else
1820 outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1821 fi
1822 fi
1823 echo -en "$outstr"
1824 done
1825 if [ -e "$MINDI_LIB/memtest.img" ] ; then
1826 if [ "$type" = "elilo" ]; then
1827 echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1828 echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1829 else
1830 ps="/"
1831 if [ "$type" = "syslinux" ]; then
1832 ps=""
1833 fi
1834 echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1835 echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1836 fi
1837 fi
1838}
1839
1840
1841PrepareBootDiskImage_LILO() {
1842 local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1843 imagesdir=$MINDI_CACHE
1844 kernelpath=$1
1845
1846 retval=0
1847
1848 old_pwd=`pwd`
1849 [ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
1850 echo -en "Making "$BOOT_SIZE"KB boot disk..."
1851 TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1852 echo -en "..."
1853 imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1854 mountpoint=$MINDI_TMP/mountpoint.$$
1855 mkdir -p $mountpoint
1856 dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1857 LogFile "Creating vfat filesystem on $imagefile"
1858 mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1859 mount -t vfat -o loop $imagefile $mountpoint || LogAll "ERROR: Cannot mount (PBDI)"
1860
1861 # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1862 mkdir -p $mountpoint/etc
1863 liloconf=$mountpoint/elilo.conf
1864
1865 MakeBootConfFile elilo > $liloconf
1866
1867 # Copy it so that CD-ROM menu entry is satisfied
1868 mountefi=0
1869 df -T | grep /boot/efi | grep -q vfat
1870 if [ $? -ne 0 ]; then
1871 mount /boot/efi
1872 if [ $? -ne 0 ]; then
1873 echo "You have to mount your EFI partition when using mindi"
1874 MindiExit -1
1875 fi
1876 mountefi=1
1877 fi
1878 el=`find /boot/efi -name elilo.efi`
1879 cp $el $mountpoint
1880 cp $liloconf $mountpoint
1881 if [ $mountefi -eq 1 ]; then
1882 umount /boot/efi 2>&1 > /dev/null
1883 fi
1884
1885 LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
1886 cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1887 if [ "$?" -ne "0" ] ; then
1888 LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1889 cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1890 LogIt " Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1891 rm -f $MINDI_TMP/mtpt.$$
1892 LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1893 retval=$(($retval+1))
1894 fi
1895 MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1896
1897 mkdir -p $mountpoint/tmp
1898 if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1899 cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1900 fi
1901
1902 # copy the kernel across
1903 [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1904 dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1905 free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1906 cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1907 if [ "$?" -ne "0" ] ; then
1908 LogFile "INFO: Files at mountpoint ($mountpoint) :"
1909 du -sk $mountpoint/* >> $LOGFILE
1910 LogFile "--- end of list of files ---"
1911 echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1912 [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1913 cd "$old_pwd"
1914 umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1915 rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1916 # losetup /dev/loop0 -d
1917 [ "$imagefile" != "" ] && rm -f $imagefile
1918 LogIt "ERROR: Sorry, your kernel is too big for your image"
1919 Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1920 return 0
1921 fi
1922 max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1923 LogFile "INFO: Free space left on image = $free_space KB"
1924 LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1925 # make it bootable
1926 [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1927 [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1928 if [ "$KERN_DISK_MADE" ] ; then
1929 LogFile "INFO: Not running LILO. It's not that kind of disk."
1930 fi
1931
1932 cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1933 umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1934 echo -en "..."
1935 rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1936 if [ "$retval" -eq "0" ] ; then
1937 echo -en "...$DONE\n"
1938 if [ "$KERN_DISK_MADE" ] ; then
1939 LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1940 fi
1941 else
1942 echo -en "...failed\n"
1943 LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1944 [ "$imagefile" != "" ] && rm -f $imagefile
1945 fi
1946 [ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
1947 return $retval
1948}
1949
1950
1951PrepareBootDiskImage_ISOLINUX() {
1952 local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage retval
1953 imagesdir=$MINDI_CACHE
1954 kernelpath=$1
1955 do_boot_root_thingy=""
1956 retval=0
1957
1958 old_pwd=`pwd`
1959 [ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
1960 echo -en "Making "$BOOT_SIZE"KB boot disk..."
1961 TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1962 echo -en "..."
1963 imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
1964 mountpoint=$MINDI_TMP/mountpoint.$$
1965 mkdir -p $mountpoint
1966 dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1967 LogFile "INFO: Creating vfat filesystem on $imagefile"
1968 mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1969 # syslinux should be run on a local file (doen't work through NFS Cf: #297)
1970 syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1971
1972 # Only move it now to its final destination and use it now
1973 mv $imagefile $imagesdir
1974 imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1975
1976 mount -t vfat -o loop $imagefile $mountpoint || LogIt "ERROR: Cannot mount (PBDI)"
1977
1978 # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1979 MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1980 MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
1981 LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1982 cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1983 if [ "$?" -ne "0" ] ; then
1984 LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1985 cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1986 LogAll " Please unload some of your modules and try again."
1987 rm -f $MINDI_TMP/mtpt.$$
1988 LogAll " Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
1989 LogAll " Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1990 retval=$(($retval+1))
1991 fi
1992
1993 mkdir -p $mountpoint/tmp
1994 if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1995 cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1996 fi
1997
1998 # copy the kernel across
1999 [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
2000 dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
2001 free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
2002
2003 retval=0
2004 cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
2005 retval=$?
2006 if [ $KERNEL_IS_XEN = "yes" ]; then
2007 cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
2008 let retval+=$?
2009 fi
2010
2011 if [ "$retval" -ne "0" ] ; then
2012 LogFile "INFO: Files at mountpoint ($mountpoint) :"
2013 du -sk $mountpoint/* >> $LOGFILE
2014 LogFile "--- end of list of files ---"
2015 echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
2016 [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
2017 cd "$old_pwd"
2018 umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2019 rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2020
2021 LogIt "ERROR: Sorry, your kernel is too big for your image"
2022 Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
2023 fi
2024 max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
2025 LogFile "INFO: Free space left on image = $free_space KB"
2026 LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
2027
2028 # make it bootable
2029 [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
2030 mkdir -p $mountpoint/etc
2031 [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
2032 umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2033 echo -en "..."
2034 rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2035
2036 if [ "$retval" -eq "0" ] ; then
2037 echo -en "...$DONE\n"
2038 if [ "$KERN_DISK_MADE" ] ; then
2039 [ "$imagefile" != "" ] && rm -f $imagefile
2040 LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2041 fi
2042 else
2043 echo -en "...failed\n"
2044 LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2045 [ "$imagefile" != "" ] && rm -f $imagefile
2046 fi
2047 [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning nonzero"
2048 return $retval
2049}
2050
2051
2052ParseModprobeForIncludes() {
2053local MODPROBE_CONF mpincfile includes include
2054
2055MODPROBE_CONF=/etc/modprobe.conf
2056mpincfile=$1
2057touch $mpincfile
2058if [ -a $MODPROBE_CONF ]; then
2059 includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2060 if [ -n "$includes" ]; then
2061 for include in $includes
2062 do
2063 if [ -a "$include" ]; then
2064 echo $include >> $mpincfile
2065 fi
2066 done
2067 fi
2068fi
2069}
2070
2071
2072PrepareDataDiskImages() {
2073 local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
2074
2075 imagesdir=$MINDI_CACHE
2076 rm -f $imagesdir/mindi.iso
2077 needlist=$MINDI_TMP/what-we-need.txt
2078 bigdir=$MINDI_TMP/bigdir
2079 mkdir -p $bigdir/usr/bin
2080 mkdir -p $bigdir/usr/sbin
2081 includefile=$MINDI_TMP/$$.includefile.txt
2082
2083 # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2084 for d in bin sbin lib lib64; do
2085 if [ -h "/$d" ]; then
2086 thelink=`readlink /$d`
2087 mkdir -p $thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2088 mv $d/* $thelink 2> /dev/null
2089 if [ -d "$d" ]; then
2090 rmdir $d
2091 fi
2092 if [ ! -h $d ]; then
2093 ln -s $thelink $d || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2094 fi
2095 fi
2096 done
2097
2098 lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2099 if [ -e "$DEPLIST_FILE" ]; then
2100 lfiles="$DEPLIST_FILE $lfiles"
2101 fi
2102 lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2103 ParseModprobeForIncludes $includefile
2104 lines=$(($lines+`cat $includefile | wc -l`))
2105 cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2106 res=$?
2107 rm -f $includefile
2108 if [ "$YOUR_KERNEL_SUCKS" ]; then
2109 pwd=`pwd`
2110 cd "$MINDI_TMP"
2111 for i in `ListKernelModulePaths | HackPathsToFailsafe` ; do
2112 tar cf - ./$i 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || Die "PDDI can't copy $i->$bigdir" $MINDI_TMP/$$.log
2113 done
2114 for i in $EXTRA_MODS ; do
2115 j=`find lib/modules/$FAILSAFE_KVER -name $i.*o.gz 2> /dev/null`
2116 [ ! "$j" ] && LogFile "WARNING: cannot find failsafe module $i.o.gz"
2117 for k in $j ; do
2118 tar cf - $k 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogIt "ERROR: module $k extraction issue" $MINDI_TMP/$$.log
2119 LogFile "INFO: Added failsafe module $k to ramdisk"
2120 done
2121 done
2122 cd "$pwd"
2123 else
2124 ListKernelModulePaths >> $needlist
2125 fi
2126 if [ "$res" -ne "0" ] ; then
2127 Die "You have $res files present in dependency list\nbut absent from filesystem."
2128 fi
2129 FindAndAddUserKeyboardMappingFile
2130 mkdir -p $bigdir/tmp
2131 if [ _"$MONDO_SHARE" != _"" ]; then
2132 MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2133 cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
2134 fi
2135 [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2136 DropOptimizedLibraries $needlist $bigdir
2137 echo -en "Assembling dependency files"
2138
2139 CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2140
2141 # also copy io.sys and msdos.sys, if we can find them
2142 for i in `mount | cut -d' ' -f3` ; do
2143 for j in io.sys msdos.sys ; do
2144 [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2145 done
2146 done
2147
2148 # master boot record, too
2149 i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2150 if [ "$i" ] ; then
2151 LogAll "INFO: Backing up $i's MBR"
2152 dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2153 sleep 1
2154 sync
2155 j=$i
2156 [ -h "$j" ] && j=`readlink -f $j`
2157 LogAll "INFO: Creating /dev/boot_device ($j)"
2158 mkdir -p $bigdir/dev
2159 cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2160 fi
2161
2162 old_pwd=`pwd`
2163 cd "$bigdir"
2164
2165 # Get terminfo content
2166 ti="usr/share/terminfo/l"
2167 if [ -d /$ti ]; then
2168 mkdir -p $ti
2169 cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2170 fi
2171 if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2172 cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2173 [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2174 fi
2175 if [ -d "/lib/dev-state" ]; then
2176 tar cf - -C / ./lib/dev-state 2>> $MINDI_TMP/$$.log | tar xf - || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2177 fi
2178 cd "$old_pwd"
2179 echo -e "$DONE"
2180 TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2181 MakeMountlist $MINDI_TMP/mountlist.txt
2182 CheckMountlist $MINDI_TMP/mountlist.txt
2183 mkdir -p $bigdir/tmp
2184 cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2185 if [ _"$MONDO_SHARE" != _"" ]; then
2186 cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2187 fi
2188 if [ $LVM != "false" ]; then
2189 $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2190 if [ "$?" -ne "0" ]; then
2191 LVM="false"
2192 rm -f $bigdir/tmp/i-want-my-lvm
2193 else
2194 LogFile "Your i-want-my-lvm file content is:"
2195 LogFile "-----------------------------------"
2196 cat $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2197 LogFile "-----------------------------------"
2198 fi
2199 fi
2200 LogFile "Your mountlist.txt file content is:"
2201 LogFile "-----------------------------------"
2202 cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2203 LogFile "-----------------------------------"
2204
2205 echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2206 echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2207 if [ _"$MONDO_SHARE" != _"" ]; then
2208 for q in filelist.full.gz biggielist.txt ; do
2209 [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2210 cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2211 done
2212 fi
2213
2214 echo -en "Tarring and zipping the data content..."
2215 size_of_all_tools=`du -sk $bigdir | cut -f1`
2216 (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $imagesdir/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2217 LogFile "Size of the data content"
2218 LogFile "------------------------"
2219 du -sk $imagesdir/*gz >> $LOGFILE
2220 LogFile "------------------------"
2221 echo -e "$DONE"
2222
2223 FRIENDLY_OUTSTRING="Boot and data disk images were created."
2224 rm -rf $bigdir
2225 rm -f $needlist
2226}
2227
2228
2229ProcessLDD() {
2230 local incoming f d nd bd bnd
2231 read incoming
2232 while [ "$incoming" != "" ]; do
2233 # We take the full path name of the dyn. lib. we want
2234 incoming=`echo "$incoming" | $AWK '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
2235 for f in $incoming ; do
2236 # echo modified file name if one of the parent dir is a link
2237 # by replacing the original dirname by the destination of the link
2238 d="`dirname $f`"
2239 found="false"
2240 while [ "$d" != "/" ]; do
2241 if [ -h "$d" ]; then
2242 nd=`readlink -f $d`
2243 bd=`basename $d`
2244 bnd=`basename $nd`
2245 f=`echo $f | sed "s~/$bd/~/$bnd/~"`
2246 echo $d
2247 fi
2248 d="`dirname $d`"
2249 done
2250
2251 echo "$f"
2252 echo "`ReadAllLink $f`"
2253 done
2254 read incoming
2255 done
2256}
2257
2258
2259Prompt() {
2260 echo -en "$1"
2261 read line
2262}
2263
2264
2265ReadLine() {
2266 local i incoming
2267 read incoming
2268 i=0
2269 while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2270 i=$(($i+1))
2271 read incoming
2272 done
2273 echo "$incoming"
2274}
2275
2276
2277SizeOfPartition() {
2278 local devpath drive res stub
2279 device=$1
2280 if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2281 Die "Cannot find $device's size - is your /etc/fstab sane?"
2282 fi
2283 if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2284 res=`SizeOfRaidPartition $device`
2285 [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2286 echo "$res"
2287 return 0
2288 fi
2289 # patch from Bill <bill@iwizard.biz> - 2003/08/25
2290 res=`$FDISK -s $device 2>> $LOGFILE`
2291 # end patch
2292 # take only the first in case of multiple mount (cifs, nfs, ...)
2293 [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2294 [ "$res" = "" ] && res="-1"
2295 echo $res
2296 return 0
2297}
2298
2299
2300SizeOfRaidPartition() {
2301 local real_dev smallest_size silly tmp
2302
2303 silly=999999999
2304 smallest_size=$silly
2305
2306 for real_dev in `GetRaidDevMembers $1` ; do
2307 tmp=`SizeOfPartition $real_dev`
2308 [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2309 done
2310
2311 if [ "$smallest_size" = "$silly" ] ; then
2312 echo "-1"
2313 return 1
2314 else
2315 echo "$smallest_size"
2316 return 0
2317 fi
2318}
2319
2320
2321StripExecutable()
2322{
2323 local tmpfile
2324
2325 tmpfile=$MINDI_TMP/stripped.$$.dat
2326 [ -d "$1" ] || [ -h "$1" ] && return
2327 cp -f $1 $tmpfile 2>> $LOGFILE
2328 strip $tmpfile 2> /dev/null
2329 if [ "$?" -eq "0" ] ; then
2330 cp -f $tmpfile $1 2>> $LOGFILE
2331 LogFile "INFO: Stripped binary $2"
2332 fi
2333 rm -f $tmpfile
2334}
2335
2336KernelVer() {
2337 local fkern_ver fname
2338
2339 fname=$1
2340 file $fname | grep -q gzip
2341 if [ "$?" -eq "0" ] ; then
2342 # Used by ia64
2343 fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2344 else
2345 fkern_ver=`strings $fname 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2346 fi
2347 echo "$fkern_ver"
2348}
2349
2350
2351# WARNING: This function should just echo the final result !!!
2352#
2353TryToFindKernelPath() {
2354 local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2355
2356 we_want_version=$KERVERRUN
2357 possible_kernels=""
2358 duff_kernels=""
2359 output=""
2360
2361 if [ "$ARCH" = "ia64" ] ; then
2362 root="/boot/efi/efi"
2363 else
2364 root="/"
2365 fi
2366 # See if we're booted from a Xen kernel
2367 # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2368 if [ -f /proc/xen/capabilities ]; then
2369 # It's a Xen kernel
2370 KERNEL_IS_XEN="yes"
2371 LogFile "INFO: It's a Xen kernel..."
2372 fi
2373
2374 for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2375 [ ! -e "$fname" ] && continue
2376 [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2377 fkern_ver=`KernelVer $fname`
2378 [ "$fkern_ver" = "" ] && continue
2379 [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2380 [ -f "$fname" ] || continue
2381 [ -h "$fname" ] && continue
2382 kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2383 file $fname | grep -q gzip
2384 if [ "$?" -eq "0" ] ; then
2385 # Used by ia64
2386 if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2387 LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2388 duff_kernels="$fname $duff_kernels"
2389 else
2390 [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2391 possible_kernels="$fname $possible_kernels"
2392 fi
2393 else
2394 if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2395 LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2396 duff_kernels="$fname $duff_kernels"
2397 else
2398 [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2399 possible_kernels="$fname $possible_kernels"
2400 fi
2401 fi
2402 done
2403 if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2404 possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2405 fi
2406 if [ ! "$possible_kernels" ] ; then
2407 LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2408 possible_kernels="$duff_kernels"
2409 if [ ! "$possible_kernels" ] ; then
2410 LogAll "INFO: Sorry, no duff kernels either"
2411 else
2412 LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2413 LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2414 fi
2415 fi
2416 if [ $KERNEL_IS_XEN = "yes" ]; then
2417 possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2418 noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2419 FindMboot32Binary
2420 fi
2421 possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2422 noof_kernels=`CountItemsIn "$possible_kernels"`
2423 if [ "$noof_kernels" -eq "0" ] ; then
2424 LogAll "Could not find your kernel."
2425 if [ -e "/boot/vmlinuz" ] ; then
2426 LogAll "INFO: Using /boot/vmlinuz as a last resort."
2427 output=/boot/vmlinuz
2428 else
2429 output=""
2430 fi
2431 elif [ "$noof_kernels" -eq "1" ] ; then
2432 kp=`echo "$possible_kernels" | sed s/' '//`
2433 LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2434 output="$kp"
2435 else
2436 for i in $possible_kernels ; do
2437 if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2438 LogAll "INFO: OK, I used my initiative and found that "
2439 LogAll "INFO: $i is probably your kernel. "
2440 output="$i"
2441 break
2442 fi
2443 done
2444 if [ ! -n "$output" ]; then
2445 if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2446 output=/boot/vmlinuz
2447 LogFile "INFO: Schlomo, this one's for you."
2448 else
2449 LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2450 LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2451 LogFile "INFO: $possible_kernels"
2452 output=""
2453 fi
2454 fi
2455 fi
2456 if [ $KERNEL_IS_XEN = "yes" ]; then
2457 if [ "$noof_xenkernels" -eq "0" ]; then
2458 xenkernelpath=""
2459 elif [ "$noof_xenkernels" -eq "1" ]; then
2460 xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2461 LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2462 else
2463 for i in $possible_xenkernels ; do
2464 if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2465 LogFile "INFO: OK, I used my initiative and found that "
2466 LogFile "INFO: $i is probably your Xen kernel. "
2467 xenkernelpath="$i"
2468 break
2469 fi
2470 done
2471 if [ ! -n "$xenkernelpath" ]; then
2472 new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2473 if [ ! -n "$new_possible_xenkernels" ]; then
2474 xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2475 LogFile "INFO: Using $xenkernelpath"
2476 else
2477 LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2478 LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2479 LogFile "INFO: $possible_xenkernels"
2480 output=""
2481 xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2482 LogFile "INFO: Using $xenkernelpath"
2483 fi
2484 fi
2485 fi
2486 if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2487 Die "Cannot find Xen kernel $xenkernelpath, aborting"
2488 fi
2489 fi
2490 LogAll "TryToFindKernelPath found $output"
2491 echo "$output"
2492}
2493
2494
2495TurnTgzIntoRdz() {
2496 local tgz_dir_fname rdz_fname tempfile mountpoint old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path
2497
2498 tgz_dir_fname=$1
2499 rdz_fname=$2
2500 kernelsize=$3
2501 maxsize=$(($BOOT_SIZE-$kernelsize))
2502 maxsize=$(($maxsize*2)); # to allow for compression of 50%
2503 tempfile=$MINDI_TMP/temp.rd
2504 mountpoint=$MINDI_TMP/mnt1
2505 res=0
2506 echo -en "..."
2507 dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2508 echo -en "..."
2509 LogFile "INFO: Creating ext2 filesystem on $tempfile"
2510 mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2511 echo -en "..."
2512 mkdir -p $mountpoint
2513 mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2514 echo -en "..."
2515 old_pwd=`pwd`
2516 cd "$mountpoint"
2517
2518
2519 # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2520 for f in $tgz_dir_fname/*; do
2521 if [ ! -r $f ]; then
2522 Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2523 else
2524 cp -Rdf $f . 2>&1 >> $LOGFILE
2525 fi
2526 done
2527 tar -zxf symlinks.tgz || Die "Cannot untar symlinks.tgz"
2528
2529 cd dev || Die "Can't cd to dev"
2530 tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2531 rm -f dev-entries.tgz
2532 cd ..
2533
2534 for w in insmod.static insmod.static.old ; do
2535 s=`which $w 2> /dev/null`
2536 if [ -e "$s" ] ; then
2537 tar cf - -C / $s 2> /dev/null | tar xf -
2538 fi
2539 done
2540
2541 [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2542
2543 # Copy of files mandatory for ssh to automate mount if sshfs is used
2544 mkdir $mountpoint/.ssh
2545 cp -rp ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2546 echo > $mountpoint/tmp/myssh << EOF
2547ssh -o StrictHostKeyChecking=no $*
2548EOF
2549 chmod 755 $mountpoint/tmp/myssh
2550
2551 # Copy of files mandatory for ld.so
2552 cp -rp /etc/ld.so.c* $mountpoint/etc
2553
2554 # Handle the case where busybox and mount are dynamically linked
2555 file $MINDI_LIB/rootfs/bin/busybox 2>&1 | grep -q "dynamically"
2556 if [ $? -eq 0 ]; then
2557 # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2558 rm -f bin/mount
2559 fi
2560
2561 # Copy of files from the minimal env needed as per the deplist.d/minimal.conf file (which includes all busybox deps)
2562 rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2563 for f in `grep -v " *#.*" $DEPLIST_DIR/minimal.conf | sort -u`; do
2564 if [ -r $f ]; then
2565 echo $f >> $MINDI_TMP/minimal.lis
2566 LocateDeps $f >> $MINDI_TMP/minimal2.lis
2567 fi
2568 done
2569 for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
2570 ReadAllLink $f >> $MINDI_TMP/minimal.lis
2571 done
2572 # Initial / are trucated by tar
2573 finallist=""
2574 # Remove directories from the list, as tar will create them anyway
2575 # and it may hurt if /lib is in it as on Debian/Ubuntu
2576 # recent bash says that -d is true for a link to a dir !
2577 for f in `sort -u $MINDI_TMP/minimal.lis`; do
2578 if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2579 finallist="$finallist $f"
2580 fi
2581 done
2582 tar cf - $finallist 2>> $MINDI_TMP/$$.log | tar xUf - || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2583
2584 # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2585 ln -sf /bin/bash bin/sh
2586 LogIt "INFO: Using bash as default shell"
2587 rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2588
2589 # Avoids an issue on some distro (RHEL5)
2590 rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2591
2592 mkdir -p $mountpoint/tmp
2593 # Management of udev (which includes modprobe in rules)
2594 ps auxww | grep -v grep | grep -qw udevd
2595 if [ $? -eq 0 ]; then
2596 echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2597 LogIt "INFO: udev device manager found"
2598 tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
2599 # This avoids NIC remapping if on another machine at restore time on Debian at least
2600 rm -f ./etc/udev/rules.d/z[0-9][0-9]_persistent-net.rules
2601 # This avoids NIC remapping if on another machine at restore time on Ubuntu at least
2602 rm -f ./etc/udev/rules.d/[0-9][0-9]-persistent-net.rules
2603 # Do not do it if it's a link (Ubuntu 64 bits #503)
2604 if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2605 tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
2606 fi
2607 if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [ ! -h "/lib32/udev" ]; then
2608 tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
2609 fi
2610 if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [ ! -h "/lib/udev" ]; then
2611 tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
2612 fi
2613 if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ]; then
2614 lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2615 lis=""
2616 # Get only the files which exist in that list
2617 # and potentially their symlink structure
2618 for i in $lis2; do
2619 if [ -h $i ]; then
2620 j=$i
2621 while [ -h $j ]; do
2622 lis="$lis $j"
2623 j=`readlink $j`
2624 done
2625 lis="$lis $j"
2626 elif [ -f $i ]; then
2627 lis="$lis $i"
2628 fi
2629 done
2630 # And their deps
2631 LocateDeps $lis > $MINDI_TMP/udev.lis
2632 for i in $lis; do
2633 if [ "`echo $i | cut -c1`" = "/" ]; then
2634 j=`echo $i | cut -c2-`
2635 [ "$j" != "" ] && rm -f $j
2636 fi
2637 done
2638 tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2639 rm -f $MINDI_TMP/udev.lis
2640 else
2641 LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2642 LogAll " mindi will use static devices which may cause problems"
2643 rm -f $mountpoint/tmp/USE-UDEV
2644 fi
2645 fi
2646
2647 # Management of potential HW info (ProLiant only at the moment)
2648 rm -rf $MINDI_CACHE/bkphw
2649 mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2650 if [ -d $MINDI_CACHE/bkphw ]; then
2651 LogIt "INFO: Hardware Information found and saved ..."
2652 cp -rp $MINDI_CACHE/bkphw .
2653 if [ -f $MINDI_CACHE/tools.files ]; then
2654 lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
2655 LocateDeps $lis > $MINDI_TMP/tools.lis
2656 tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
2657 fi
2658 if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2659 mv -f $MINDI_CACHE/mindi-rsthw .
2660 chmod 755 ./mindi-rsthw
2661 fi
2662 rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2663 fi
2664
2665 # Management of perl scripts delivered needed at restore time
2666 mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` > $MINDI_TMP/perl.lis
2667 tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
2668
2669 for w in cdrom groovy-stuff ; do
2670 mkdir -p mnt/$w
2671 done
2672
2673 tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
2674
2675 cd "$old_pwd"
2676 echo -en "..."
2677 if [ "$YOUR_KERNEL_SUCKS" ] ; then
2678 cd "$MINDI_TMP"
2679 needed_modules_path=lib/modules/$FAILSAFE_KVER
2680 else
2681 cd /
2682 if [ "${kernelname}" != "" ]
2683 then
2684 needed_modules_path=lib/modules/${kernelname}
2685 else
2686 needed_modules_path=lib/modules/$KERVERRUN
2687 fi
2688 fi
2689
2690 needed_modules=""
2691 list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2692
2693 if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
2694 # For PXE boot
2695 list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2696 fi
2697 if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2698 list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2699 fi
2700 for i in $DENY_MODS; do
2701 LogFile "INFO: Removing $i from the list of modules to load"
2702 list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2703 done
2704
2705 [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
2706 for i in $list_of_groovy_mods ; do
2707 needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
2708 done
2709
2710 for i in `echo $needed_modules | tr ' ' '\n' | sort -u`; do
2711 [ -e "$i" ] && s=`du -sk $i | cut -f1` || s=""
2712 [ "$YOUR_KERNEL_SUCKS" ] && i=$MINDI_TMP/$i
2713 LogFile "INFO: Adding $i ($s KB) to the rootfs"
2714 tar cf - -C / $i 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy $i to $mountpoint" $MINDI_TMP/$$.log
2715 # Uncompress modules if not using udev and native modprobe
2716 if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2717 if [ "`echo "$i" | grep -F ".gz"`" ]; then
2718 LogFile "INFO: Uncompressing $i"
2719 gunzip -f $mountpoint/$i
2720 fi
2721 fi
2722 if [ -L $mountpoint/$i ] && [ `echo "$i" | grep "\.ko$"` ]; then
2723 echo "Replacing module symlink ($i) with actual file"
2724 rm -f $mountpoint/$i
2725 cp -Lf $i $mountpoint/$i
2726 ls -l $mountpoint/$i
2727 fi
2728 done
2729
2730 # Also copy modules.* in case of udev so that normal modprobe works
2731 tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
2732
2733 # Copy FW in case some drivers needs it
2734 for d in "/lib" "/usr/lib"; do
2735 if [ -d "$d/firmware" ]; then
2736 cp -a "$d/firmware" "$mountpoint/$d"
2737 fi
2738 done
2739
2740 # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2741 for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2742 if [ -d "$d/multipath" ]; then
2743 cp -a "$d/multipath" "$mountpoint/$d"
2744 fi
2745 done
2746
2747 # Copy an additional ProLiant tool for OBDR support
2748 if [ -f $MINDI_TMP/OBDR ]; then
2749 found=0
2750 if [ -x /usr/bin/hpsa_obdr_mode ]; then
2751 mkdir -p $mountpoint/usr/bin
2752 cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2753 LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2754 found=1
2755 fi
2756 if [ -x /usr/bin/sg_wr_mode ]; then
2757 mkdir -p $mountpoint/usr/bin
2758 lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2759 LocateDeps $lis > $MINDI_TMP/obdr.lis
2760 (cd $mountpoint ; tar cf - $lis -C / `sort -u $MINDI_TMP/obdr.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $MINDI_TMP/$$.log)
2761 LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2762 found=1
2763 fi
2764 if [ $found -eq 0 ]; then
2765 LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2766 LogAll " This may lead to a tape not going back to sequential mode after OBDR boot"
2767 fi
2768 fi
2769
2770 if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2771 LogFile "INFO: Deleting devfsd daemon from ramdisk"
2772 [ ! -e "/sbin/devfsd" ] && LogFile " ...because /sbin/devfsd not found"
2773 [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && LogFile " ...because kernel is failsafe"
2774 rm -f $mountpoint/sbin/devfsd
2775 fi
2776 cd "$old_pwd"
2777 [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2778 if [ _"$MONDO_SHARE" != _"" ]; then
2779 MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2780 cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy mondo-restore.cfg to ramdisk"
2781 cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2782 echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2783 echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2784 [ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2785 [ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2786 [ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2787 [ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2788 fi
2789 mkdir -p $mountpoint/proc
2790 LogFile "---------------------------"
2791 LogFile "Content of initial ramdisk:"
2792 LogFile "---------------------------"
2793 (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2794 LogFile "---------------------------"
2795
2796 # Determine what filesystem to use for initrd image
2797 LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2798 gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2799 [ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2800 if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2801 # say what will be used
2802 LogFile "INFO: Creating an $gvFileSystem initrd image..."
2803 # kernel expects linuxrc in ext2 filesystem
2804 ( cd "$mountpoint" && ln -sf sbin/init linuxrc )
2805 # unmount loop filesystem and create image file using the standard approach
2806 umount $mountpoint || Die "Cannot unmount $tempfile"
2807 dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2808 if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2809 bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2810 else
2811 bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2812 fi
2813 MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2814 gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2815 rm -f ${rdz_fname}.tmp
2816 # log that we are done
2817 LogFile " ...done."
2818 elif [ "$gvFileSystem" = "initramfs" ]; then
2819 # say what will be used
2820 LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2821 # make sure that cpio is there
2822 which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2823 # go into filesystem
2824 cd "$mountpoint"
2825 # kernel expects init in cpio filesystem
2826 ln -sf sbin/init init
2827 # create cpio image file and unmount loop filesystem
2828 find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2829 cd "$old_pwd"
2830 umount $mountpoint || Die "Cannot unmount $tempfile"
2831 # log that we are done
2832 LogFile " ...done."
2833 else
2834 Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2835 fi
2836
2837 if [ "$res" -eq "0" ] ; then
2838 echo -en "..."
2839 else
2840 echo -en "\rMade an rdz WITH ERRORS. \n"
2841 fi
2842 return 0
2843}
2844
2845
2846##############################################################################
2847#----------------------------------- Main -----------------------------------#
2848##############################################################################
2849
2850# Now we can create what we need
2851mkdir -p $MINDI_TMP
2852
2853# Purge from potential old run
2854if [ _"$MINDI_CACHE" = _"" ]; then
2855 Die "MINDI_CACHE undefined"
2856fi
2857
2858# --nolog needs to be first, and is used in analyze-my-lvm
2859if [ "$1" = "--nolog" ] ; then
2860 shift
2861 LOGFILE=/dev/stderr
2862else
2863 > $LOGFILE
2864fi
2865if [ "$1" = "--printvar" ] ; then
2866 shift
2867 if [ _"$1" != _"" ] ; then
2868 set | grep -Ew "^$1" | cut -d= -f2
2869 fi
2870 exit 0
2871fi
2872
2873LogFile "mindi v$MINDI_VERSION"
2874LogFile "$ARCH architecture detected"
2875LogFile "mindi called with the following arguments:"
2876echo "$@">> $LOGFILE
2877LogFile "Start date : `date`"
2878LogFile "-----------------------------"
2879
2880[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2881
2882# Log some capital variables
2883[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2884[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2885LogFile "MONDO_SHARE = $MONDO_SHARE"
2886LogFile "MINDI_LIB = $MINDI_LIB"
2887LogFile "MINDI_SBIN = $MINDI_SBIN"
2888LogFile "MINDI_CONF = $MINDI_CONF"
2889if [ -f $MINDI_CONFIG ]; then
2890 LogFile "-----------------------------"
2891 LogFile " Mindi configuration file "
2892 LogFile "-----------------------------"
2893 grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2894 LogFile "-----------------------------"
2895fi
2896LogFile "In Mindi"
2897LogFile "--------"
2898LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2899LogFile "BOOT_SIZE = $BOOT_SIZE"
2900LogFile "--------"
2901
2902trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2903
2904# Sanity checks
2905which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2906which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2907which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2908which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2909if which awk &> /dev/null ; then
2910 if ! which gawk &> /dev/null ; then
2911 LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2912 fi
2913fi
2914which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2915[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2916
2917[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2918
2919# Update the PATH variable if incomplete
2920if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2921 PATH=$PATH:/sbin:/usr/sbin
2922 export PATH
2923 LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2924 LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2925 LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
2926fi
2927
2928# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
2929if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ] && [ "$kernelpath" = "FAILSAFE" ]; then
2930 source $MINDI_LIB/FindDistroFailsafe
2931 # Log kernel image
2932 LogIt "INFO: FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
2933else
2934 [ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null | grep -E "2\.[46]" | cut -d' ' -f1`
2935fi
2936
2937if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2938 Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2939fi
2940
2941### TODO
2942### Fix as it's not mandatory on ia64
2943if [ "$ARCH" = "ia64" ] ; then
2944 if which elilo &> /dev/null ; then
2945 LILO_EXE=elilo
2946 else
2947 LILO_EXE=`which false 2> /dev/null`
2948 fi
2949else
2950 FindIsolinuxBinary
2951fi
2952trap "Aborted" SIGTERM
2953DONE="\r\t\t\t\t\t\t\t\tDone. "
2954kernelpath=""
2955MONDO_ROOT=/var/cache/mondo
2956mkdir -p $MONDO_ROOT
2957
2958if [ -d "/proc/lvm" ]; then
2959 # LVM v1
2960 LVMCMD=""
2961 LVM="v1"
2962elif [ -d "/dev/mapper" ]; then
2963 # LVM v2
2964 LVMCMD="lvm"
2965 LVM="v2"
2966else
2967 LVM="false"
2968fi
2969
2970if [ -e "/proc/cmdline" ]; then
2971 CMDLINE="/proc/cmdline"
2972elif [ -e "/tmp/cmdline" ]; then
2973 CMDLINE="/tmp/cmdline"
2974else
2975 CMDLINE="/dev/null"
2976fi
2977
2978LogFile "INFO: LVM set to $LVM"
2979LogFile "----------"
2980LogFile "mount result:"
2981LogFile "-------------"
2982mount >> $LOGFILE
2983if [ -e /etc/raidtab ]; then
2984 LogFile "-------------"
2985 LogFile "/etc/raidtab content:"
2986 LogFile "-------------"
2987 cat /etc/raidtab >> $LOGFILE
2988else
2989 LogFile "No file /etc/raidtab"
2990fi
2991if [ -e /etc/mdadm.conf ]; then
2992 LogFile "-------------"
2993 LogFile "/etc/mdadm.conf content:"
2994 LogFile "-------------"
2995 cat /etc/mdadm.conf >> $LOGFILE
2996else
2997 LogFile "-------------"
2998 LogFile "No file /etc/mdadm.conf"
2999fi
3000LogFile "-------------"
3001LogFile "cat $CMDLINE"
3002LogFile "-------------"
3003cat $CMDLINE >> $LOGFILE
3004LogFile "-------------"
3005LogFile "cat /proc/swaps:"
3006LogFile "-------------"
3007cat /proc/swaps >> $LOGFILE
3008LogFile "-------------"
3009if [ -e /proc/mdstat ]; then
3010 LogFile "cat /proc/mdstat:"
3011 LogFile "-------------"
3012 cat /proc/mdstat >> $LOGFILE
3013else
3014 LogFile "No pseudo file /proc/mdstat"
3015fi
3016LogFile "-------------"
3017LogFile "cat /proc/partitions:"
3018LogFile "-------------"
3019cat /proc/partitions >> $LOGFILE
3020LogFile "-------------"
3021LogFile "cat /proc/filesystems:"
3022LogFile "-------------"
3023cat /proc/filesystems >> $LOGFILE
3024LogFile "-------------"
3025LogFile "lsmod result:"
3026LogFile "-------------"
3027lsmod >> $LOGFILE
3028MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3029if [ -x /usr/sbin/esxcfg-module ]; then
3030 LogFile "-------------"
3031 LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3032 LogFile "-------------"
3033 LogFile "VMWare modules"
3034 LogFile "-------------"
3035 /usr/sbin/esxcfg-module -l >> $LOGFILE
3036 MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3037fi
3038LogFile "Liste of extra modules is:"
3039LogFile "-------------"
3040LogFile "$EXTRA_MODS"
3041LogFile "-------------"
3042LogFile "FORCE_MODS:"
3043LogFile "-------------"
3044LogFile "$FORCE_MODS"
3045LogFile "-------------"
3046LogFile "DENY_MODS:"
3047LogFile "-------------"
3048LogFile "$DENY_MODS"
3049LogFile "-------------"
3050LogFile "df result:"
3051LogFile "----------"
3052df -aT >> $LOGFILE
3053LogFile "-------------"
3054LogFile "df -i result:"
3055LogFile "----------"
3056df -i >> $LOGFILE
3057LogFile "-------------"
3058if [ -r /boot/grub/menu.lst ]; then
3059 LogFile "-------------"
3060 LogFile "INFO: /boot/grub/menu.lst content"
3061 LogFile "-------------"
3062 cat /boot/grub/menu.lst >> $LOGFILE
3063 LogFile "-------------"
3064fi
3065if [ -r /boot/grub/grub.conf ]; then
3066 LogFile "-------------"
3067 LogFile "INFO: /boot/grub/grub.conf content"
3068 LogFile "-------------"
3069 cat /boot/grub/grub.conf >> $LOGFILE
3070 LogFile "-------------"
3071fi
3072if [ -r /boot/grub/grub.cfg ]; then
3073 LogFile "-------------"
3074 LogFile "INFO: /boot/grub/grub.cfg content"
3075 LogFile "-------------"
3076 cat /boot/grub/grub.cfg >> $LOGFILE
3077 LogFile "-------------"
3078fi
3079if [ -r /boot/grub/device.map ]; then
3080 LogFile "-------------"
3081 LogFile "INFO: /boot/grub/device.map content"
3082 LogFile "-------------"
3083 cat /boot/grub/device.map >> $LOGFILE
3084 LogFile "-------------"
3085fi
3086if [ -r /etc/lilo.conf ]; then
3087 LogFile "-------------"
3088 LogFile "INFO: /etc/lilo.conf content"
3089 LogFile "-------------"
3090 cat /etc/lilo.conf >> $LOGFILE
3091fi
3092LogFile "Full fdisk info"
3093LogFile "---------------"
3094$FDISK -l >> $LOGFILE
3095LogFile "----------------"
3096LogFile "List of extra modules is:"
3097LogFile "$EXTRA_MODS"
3098LogFile "-------------"
3099
3100# Compute libata version
3101laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/ *//g' 2> /dev/null`
3102# If libata v2 is used then remove ide-generic as it will perturbate boot
3103if [ "`echo $MODULES | grep libata`" ]; then
3104 if [ "$laver" = "2" ]; then
3105 DENY_MODS="$DENY_MODS ide-generic"
3106 LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3107 LogFile "-------------"
3108 fi
3109fi
3110
3111# Check for McAfee which disturbs the access to some files (tgz in articular)
3112if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3113 LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3114 LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3115 LogFile "WARNING: You have two options:"
3116 LogFile "WARNING: - Exclude all directories with special files (check McAfee System Events Log)"
3117 LogFile "WARNING: - Disable the scanner during the backup"
3118fi
3119
3120# Check for ISO_CMD command
3121if [ ! -x $ISO_CMD ]; then
3122 LogFile "NOTE: No CD image (ISO file) utility found"
3123fi
3124
3125FLOPPY_WAS_MOUNTED=""
3126for mtpt in /media/floppy /mnt/floppy /floppy ; do
3127 if mount | grep -w $mtpt &> /dev/null ; then
3128 FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3129 umount $mtpt
3130 fi
3131done
3132
3133#
3134# If we have a USB device we need to store info
3135# and remove it from the parameters line
3136#
3137if [ "$#" -ne "0" ] ; then
3138 if [ "$1" = "--usb" ] ; then
3139 shift
3140 USBDEVICE=$1
3141 if [ _"$USBDEVICE" = _"" ]; then
3142 Die "No USB device specified"
3143 fi
3144 shift
3145 fi
3146fi
3147
3148if [ "$#" -ne "0" ] ; then
3149 if [ "$1" = "--findkernel" ] ; then
3150 resk=`TryToFindKernelPath`
3151 # Avoids logfile content for mondo
3152 export MONDO_SHARE=""
3153 if [ "$resk" = "" ] ; then
3154 if [ $KERNEL_IS_XEN = "yes" ]; then
3155 echo "$xenkernelpath"
3156 LogFile "INFO: xenkernelpath = $xenkernelpath"
3157 MindiExit 0
3158 else
3159 MindiExit -1
3160 fi
3161 else
3162 echo "$resk"
3163 LogFile "INFO: kernelpath = $resk"
3164 MindiExit 0
3165 fi
3166 elif [ "$1" = "--locatedeps" ] ; then
3167 [ ! "$2" ] && Die "Please specify the binary to look at"
3168 LocateDeps $*
3169 # Avoids logfile content for mondo
3170 export MONDO_SHARE=""
3171 MindiExit $?
3172 elif [ "$1" = "--readalllink" ] ; then
3173 [ ! "$2" ] && Die "Please specify the binary to look at"
3174 # Avoids logfile content for mondo
3175 export MONDO_SHARE=""
3176 ReadAllLink $2
3177 MindiExit $?
3178 elif [ "$1" = "--makemessage" ] ; then
3179 MakeMessageFile | cut -c1-80
3180 MindiExit 0
3181 elif [ "$1" = "--makemountlist" ] ; then
3182 [ ! "$2" ] && Die "Please specify the output file"
3183 MakeMountlist $2
3184 CheckMountlist $2
3185 # Avoids logfile content for mondo
3186 export MONDO_SHARE=""
3187 MindiExit $?
3188 elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3189 echo "Mindi v$MINDI_VERSION"
3190 # Avoids logfile content for mondo
3191 export MONDO_SHARE=""
3192 MindiExit 0
3193 elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3194 MONDO_TMP=$2
3195 # Change MINDI_TMP for the one provided by mondo
3196 # So that it can get back the built files
3197 if [ _"$MONDO_TMP" = _"" ]; then
3198 Die "MONDO_TMP is empty, aborting"
3199 fi
3200 if [ _"$MONDO_TMP" = _"/" ]; then
3201 Die "MONDO_TMP is /, aborting"
3202 fi
3203 mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3204 rmdir $MINDI_TMP
3205 export MINDI_TMP=$MONDO_TMP
3206 mkdir -p $MINDI_TMP
3207
3208 # This is the scratch dir in mondo - subdir images
3209 MINDI_CACHE=$3
3210
3211 kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3212 [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3213
3214###
3215### Sq-Modification...
3216### Attempt to locate kernel specific module path
3217### if module path is found then use it other wise use uname -r to set it...
3218###
3219 if [ $KERNEL_IS_XEN = "yes" ]; then
3220 LogAll "INFO: xenkernelpath = $xenkernelpath"
3221 fi
3222 kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3223 if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
3224 then
3225 LogAll "WARNING: Module path for ${kernelpath} not found..."
3226 LogAll " using running kernel\'s modules."
3227 kernelname=$KERVERRUN
3228 else
3229 LogAll "Using modules for kernel: ${kernelname}"
3230 fi
3231 LogAll "INFO: kernelname = $kernelname"
3232 LogAll "INFO: kernelpath = $kernelpath"
3233###
3234### end of Sq-Modification
3235###
3236 TAPEDEV=$5
3237 TAPESIZE=$6
3238 FILES_IN_FILELIST=$7
3239 USE_LZO=$8
3240 CDRECOVERY=$9
3241 if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3242 IMAGE_DEVS=""
3243 else
3244 IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3245 fi
3246 if [ "${11}" ] ; then
3247 LILO_OPTIONS=""
3248 # LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3249 fi
3250 LAST_FILELIST_NUMBER=${12}
3251 ESTIMATED_TOTAL_NOOF_SLICES=${13}
3252 export MINDI_EXCLUDE_DEVS="${14}"
3253 USE_COMP="${15}"
3254 USE_LILO="${16}"
3255 USE_STAR="${17}"
3256 INTERNAL_TAPE_BLOCK_SIZE="${18}"
3257 DIFFERENTIAL="${19}"
3258 USE_GZIP="${20}"
3259 NOT_BOOT="${21}"
3260 [ "$USE_COMP" = "" ] && USE_COMP=yes
3261 [ "$USE_GZIP" = "" ] && USE_GZIP=no
3262 [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3263 [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3264 # MONDO_ROOT is the real scratchdir
3265 MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3266 if [ _"$MONDO_ROOT" != _"" ]; then
3267 mkdir -p $MONDO_ROOT
3268 else
3269 Die "MONDO_ROOT is undefined"
3270 fi
3271 else
3272 LogScreen "Syntax: mindi (--custom ....)"
3273 MindiExit -1
3274 fi
3275fi
3276
3277if [ _"$MINDI_CACHE" != _"" ]; then
3278 rm -rf $MINDI_CACHE/* 2> /dev/null
3279 mkdir -p $MINDI_CACHE
3280fi
3281
3282[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3283
3284if [ _"$MONDO_SHARE" = _"" ]; then
3285 LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3286 LogIt "Latest Mindi is available from http://www.mondorescue.org"
3287 LogIt "BusyBox sources are available from http://www.busybox.net"
3288 LogIt "------------------------------------------------------------------------------"
3289else
3290 LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
3291fi
3292if [ -f $MINDI_LIB/rootfs/bin/busybox ]; then
3293 LogIt "Mindi-`$MINDI_LIB/rootfs/bin/busybox 2>&1 | head -1`"
3294else
3295 LogIt "ERROR: Unable to find mindi-busybox, please install it"
3296 MindiExit -1
3297fi
3298
3299for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3300 modinfo $i 2> /dev/null 1> /dev/null
3301 if [ $? -eq 0 ]; then
3302 modprobe $i 2>&1 > /dev/null
3303 fi
3304done
3305
3306KERN_DISK_MADE=""
3307
3308LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3309LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3310LogFile "NOT_BOOT = '$NOT_BOOT'"
3311if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3312 LogIt "INFO: Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
3313 MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
3314 MakeMountlist $MINDI_TMP/mountlist.txt
3315 CheckMountlist $MINDI_TMP/mountlist.txt
3316 mkdir -p $MINDI_TMP/small-all/tmp
3317 cd "$MINDI_TMP/small-all"
3318 cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3319 tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3320 sleep 2
3321 LogIt "Done. Exiting."
3322 MindiExit 0
3323fi
3324
3325if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3326 LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3327fi
3328
3329if [ "$kernelpath" = "" ] ; then
3330 [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3331 echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3332 read ch
3333 if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3334 USE_OWN_KERNEL="yes"
3335 else
3336 USE_OWN_KERNEL="no"
3337 fi
3338 if [ "$USE_OWN_KERNEL" = "yes" ]; then
3339 YOUR_KERNEL_SUCKS=""
3340 kernelpath=`TryToFindKernelPath`
3341 if [ "$kernelpath" = "" ] ; then
3342 echo -n "Please enter kernel path : "
3343 read kernelpath
3344 fi
3345 else
3346 YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
3347 fi
3348fi
3349if [ "$YOUR_KERNEL_SUCKS" != "" ] || [ "$kernelpath" = "" ] || [ "$kernelpath" = "SUCKS" ] || [ "$kernelpath" = "FAILSAFE" ] ; then
3350 # If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
3351 if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ]; then
3352 source $MINDI_LIB/FindDistroFailsafe
3353 # Log kernel image
3354 LogIt "INFO: FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
3355 kernelpath="$FAILSAFE_KBIN"
3356 LogIt "INFO: I shall include a failsafe kernel, not your kernel, in the boot disks."
3357 LogIt " The failsafe kernel is $kernelpath."
3358 LogIt " However, you are still running your kernel. If Mindi fails to create your"
3359 LogIt " disks then it may still be a result of a problem with your kernel."
3360 pwd=`pwd`
3361 cd "$MINDI_TMP"
3362 mkdir -p lib/modules
3363 cp -a "/lib/modules/$FAILSAFE_KVER" "lib/modules/$FAILSAFE_KVER" || Die "Cannot copy kernel modules."
3364 cd "$pwd"
3365 else
3366 kernelpath=$MINDI_LIB/vmlinuz
3367 LogIt "INFO: I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
3368 LogIt " However, you are still running your kernel. If Mindi fails to create your"
3369 LogIt " disks then it may still be a result of a problem with your kernel."
3370 pwd=`pwd`
3371 cd "$MINDI_TMP"
3372 bzip2 -dc $MINDI_LIB/lib.tar.bz2 | tar -x || Die "Cannot unzip lib.tar.bz2"
3373 cd "$pwd"
3374 fi
3375 YOUR_KERNEL_SUCKS="Your kernel sucks"
3376fi
3377echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3378[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3379
3380[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it.\nGo to http://www.mondorescue.org and download it, then install it."
3381
3382PrepareDataDiskImages
3383
3384ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3385rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3386export ramdisk_size=$rds
3387
3388LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3389if [ "$ARCH" = "ia64" ] ; then
3390 PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
3391else
3392 PrepareBootDiskImage_ISOLINUX $kernelpath || Die "Failed to create $ramdisk_size KB disk image."
3393fi
3394
3395[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3396...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3397
3398if [ _"$MONDO_SHARE" = _"" ]; then
3399 ListImagesForUser
3400 OfferToMakeBootableISO
3401 if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3402 OfferToMakeBootableUSB
3403 fi
3404 LogAll "Finished."
3405elif [ "$TAPEDEV" ] ; then
3406 if [ "$ARCH" != "ia64" ] ; then
3407 # We need to keep the img file as boot file for ia64 platform
3408 rm -f $MINDI_CACHE/{*img,*iso}
3409 else
3410 rm -f $MINDI_CACHE/*iso
3411 fi
3412 if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3413 OfferToMakeBootableUSB
3414 fi
3415 OfferToMakeBootableISO
3416 if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3417 cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3418 else
3419 Die "Cannot find all.tar.gz, to be written to tape"
3420 fi
3421elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3422 OfferToMakeBootableUSB
3423else
3424 OfferToMakeBootableISO
3425fi
3426# cleanup
3427LogAll "INFO: $FRIENDLY_OUTSTRING"
3428for mtpt in $FLOPPY_WAS_MOUNTED ; do
3429 mount $mtpt
3430done
3431MindiExit 0
Note: See TracBrowser for help on using the repository browser.