Context Navigation

source: MondoRescue/branches/3.2/mindi/mindi@ 3572

Visit:

Last change on this file since 3572 was 3572, checked in by Bruno Cornec, 8 years ago
Fix #757, #780 and #781 by adding raid* drivers in mindi's driver list
Property svn:executable set to ``* Property svn:keywords set to `Rev Id`
File size: 124.5 KB

Rev	Line
[747]	1	#!/bin/bash
	2
	3	# $Id: mindi 3572 2016-04-27 14:22:24Z bruno $
	4	#
	5	#-----------------------------------------------------------------------------
	6	# mindi - mini-Linux distro based on the user's filesystem & distribution
	7	#
[1880]	8	# Mindi can create a multi-image boot/root kit. The first image is the boot
[747]	9	# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
	10	# the third disk is data disk #2; and so it goes.
	11	#
	12	# See http://www.mondorescue.org for details.
	13	#-----------------------------------------------------------------------------
	14
	15	### Which arch are we on (useful for ia64 port)
[1565]	16	ARCH=`/bin/uname -m`
[2292]	17	KERVERRUN=`/bin/uname -r`
	18	# By default we use the running kernel as a reference
	19	KERVER=$KERVERRUN
[747]	20
[2442]	21	# In case of problem with udev you can try to add udevdebug
[2564]	22	MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
[3053]	23	MINDI_DEFAULT_BOOT_OPTION="interactive"
	24	# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
	25	# So this parameter only applies to non CD recovery.
	26	MINDI_BOOT_TIMEOUT="300"
[747]	27
[1691]	28	MINDI_REV=PBREV
	29	MINDI_VER=PBVER
[747]	30
	31	MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
	32	MINDI_PREFIX=XXX
	33	MINDI_CONF=YYY
	34	MINDI_SBIN=${MINDI_PREFIX}/sbin
[934]	35	MINDI_LIB=LLL
[3149]	36	MINDI_CACHE=/var/cache/mindi
[747]	37
[3278]	38	MRCFG=mondorestore.cfg
	39
[925]	40	# Temporary directory for mindi
[3499]	41	TMPDIR=${TMPDIR:=/tmp}
	42	if [ ! -d $TMPDIR ]; then
	43	mkdir -p $TMPDIR
	44	fi
[925]	45
[3522]	46	EXTRA_SPACE=150000 # increase if you run out of ramdisk space
[747]	47
	48	PROMPT_MAKE_CD_IMAGE="yes"
	49	# Ask if you want to make a CD Image to be written?
[3522]	50	# if this is set to 'no' in the conf file, then the image will be created automatically
[747]	51
[1684]	52	PROMPT_MAKE_USB_IMAGE="yes"
	53	# Ask if you want to make a USB Image to be written?
[3522]	54	# if this is set to 'no' in the conf file, then the image will be created automatically
[1684]	55
[966]	56	USE_OWN_KERNEL="yes"
[747]	57	# If set to "no", you will be prompted for whether or not
	58	# you want to use your own kernel, or the supplied default.
	59	# If "yes" mindi will automatically use your own kernel.
[925]	60
[2629]	61	KERNEL_IS_XEN="no"
	62	# If set to "no", the kernel is not a Xen kernel
	63	# If "yes", mindi will modify isolinux.cfg for the Xen kernel.
[2880]	64	xenkernelpath=""
[2629]	65
[747]	66	MY_FSTAB=/etc/fstab
	67	TAPE_MODS="ht st osst ide-tape ide_tape"
[3540]	68	SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa hpdsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
[747]	69
	70	# ide-probe-mod
[3572]	71	IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc raid0 raid1 raid456"
[747]	72	PCMCIA_MODS="pcmcia_core ds yenta_socket"
[3474]	73	USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
[3446]	74	NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
[3517]	75	CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 nls_cp437 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs nls_utf8"
[1230]	76	# Replace with that line for HP OCMP e.g.
[2073]	77	#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
[3055]	78	DENY_MODS="kqemu vxfen"
[1399]	79	# Force some modules to be included
[1354]	80	FORCE_MODS=""
[925]	81
[747]	82	LOGFILE=/var/log/mindi.log
	83	BOOT_MEDIA_MESSAGE="\
[3173]	84	To format and restore all files automatically, type '0enuke07' <enter>.\n\
	85	To restore some/all files interactively, type '0einteractive07' <enter>.\n\
	86	To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
	87	To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
	88	\n\
	89	You may add one or more parameters as well as per the function keys below\n\
	90	e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
	91	\n\
	92	If restoring from a local external disk or USB key, do not connect it \n\
	93	until the boot-up has finished.\n\
	94	\n\
	95	\n0eF107-Main \| Boot Parameters 0eF207-1/2 \| 0eF307-2/2 \| 0eF407-PXE\n\
[747]	96	"
[3377]	97	FDISK=$MINDI_SBIN/mr-parted2fdisk
[747]	98
[925]	99	# Using a config file allow to overwrite some values
	100	MINDI_CONFIG="$MINDI_CONF/mindi.conf"
	101	if [ -f $MINDI_CONFIG ]; then
	102	. $MINDI_CONFIG
	103	fi
[1885]	104	DEPLIST_FILE="$MINDI_CONF/deplist.txt"
[2409]	105	DEPLIST_DIR="$MINDI_CONF/deplist.d"
	106
[3502]	107	# Debian 8 system e.g. use xorriso for UEFI support.
	108	# However, they use exactly the same command line parameters as mkisofs, so just
	109	# use it if it's available.
	110	ISO_CMD="/usr/bin/xorriso"
	111
	112	# Mandriva system e.g. use cdrkit, which uses genisoimage.
	113	# However, they use exactly the same command line parameters as mkisofs, so just
	114	# use it if it's available.
	115	if [ ! -x $ISO_CMD ]; then
[3505]	116	ISO_CMD="/usr/bin/genisoimage"
[3515]	117	# For compatibility with previous versions default to mkisofs
	118	if [ ! -x $ISO_CMD ]; then
	119	ISO_CMD="/usr/bin/mkisofs"
	120	fi
	121	if [ ! -x $ISO_CMD ]; then
	122	LogFile "NOTE: No CD image (ISO file) utility found"
	123	ISO_CMD = ""
	124	fi
	125	else
	126	ISO_CMD="/usr/bin/xorriso -as mkisofs"
[3502]	127	fi
	128
[3534]	129	ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi -V Mindi_Image -o $MINDI_CACHE/mindi.iso "
[925]	130
[3421]	131	# Mindi set this as default in case it's invoked alone
	132	BOOT_TYPE="BIOS"
	133	# and we also check whether we're UEFI or not.
	134	if [ -d "/sys/firmware/efi" ]; then
	135	BOOT_TYPE="UEFI"
[3429]	136	else
	137	# Find MBR in case of bootable USB device to build
	138	MBRFILE=/usr/lib/syslinux/mbr.bin
	139	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
	140	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
	141	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
	142	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
[3421]	143	fi
[3403]	144
[2880]	145	# Function to log on screen only
	146	LogScreen() {
[3368]	147	if [ -e /dev/stderr ] ; then
	148	echo -e "$1" >> /dev/stderr
	149	elif [ -e /usr/bin/logger ] ; then
	150	/usr/bin/logger -s $1
	151	fi
[2880]	152	}
[2685]	153
[2880]	154	# Function to log in log file only
	155	LogFile() {
	156
[3368]	157	echo -e "$1" >> $LOGFILE
	158	if [ _"$2" != _"" ]; then
[3403]	159	grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
[3432]	160	rm -f "$2"
[3368]	161	fi
[2880]	162	}
	163
	164	# Function to log in both screen and logfile
	165	LogAll() {
[3368]	166	LogScreen "$1"
	167	LogFile "$1" "$2"
[2880]	168	}
	169
[2963]	170	# Last function called before exiting
	171	# Parameter is exit code value
	172	# Should be declared here as used immediately below potentialy
	173	MindiExit() {
[3522]	174	LogFile "INFO: Mindi $MINDI_VERSION is exiting"
	175	LogFile "INFO: End date : `date`"
[2963]	176	if [ _"$MONDO_SHARE" != _"" ] ; then
	177	echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
[2995]	178	if [ -f $LOGFILE ]; then
	179	cat $LOGFILE >> /var/log/mondoarchive.log
	180	else
	181	echo "No LOGFILE available in that mindi run" >> /var/log/mondoarchive.log
	182	fi
[2963]	183	echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
	184	fi
[2880]	185
[2963]	186	cd /
	187	sync&
	188
	189	# Clean temporary files only when standalone mindi
	190	if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
	191	rm -Rf $MINDI_TMP
	192	fi
	193	exit $1
	194	}
	195
[2685]	196	Die() {
	197	local i
	198	if [ "$1" = "" ] ; then
[3149]	199	LogAll "FATAL ERROR"
[2685]	200	else
[3149]	201	LogAll "FATAL ERROR. $1"
[2685]	202	fi
	203	if [ _"$2" != _"" ]; then
[3403]	204	grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
[2685]	205	fi
	206	rm -f "$2"
	207
[3149]	208	LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
	209	LogAll "See http://www.mondorescue.org for more information."
	210	LogAll "WE CANNOT HELP unless you enclose that file.\n"
[2685]	211	MindiExit -1
	212	}
	213
[1485]	214	# Now we can create what we need
[2150]	215	MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
	216	if [ $? -ne 0 ]; then
	217	df $TMPDIR
	218	Die "Unable to create a temporary directory ! Check space on $TMPDIR"
	219	fi
[2153]	220	if [ _"$MINDI_TMP" = _"" ]; then
	221	Die "MINDI_TMP is empty, aborting"
	222	fi
	223	if [ _"$MINDI_TMP" = _"/" ]; then
	224	Die "MINDI_TMP is /, aborting"
	225	fi
[2150]	226	export MINDI_TMP
[940]	227
[747]	228	# ----------------------------------------------------------------------------
	229
	230
	231	AbortHere() {
[3546]	232	[ "$mountpoint" ] && sync && umount $mountpoint 2>> $LOGFILE
[747]	233	Die "Program is terminating in response to signal received from OS/user"
	234	}
	235
	236
	237	Aborted() {
	238	trap SIGHUP SIGTERM SIGTRAP SIGINT
[1880]	239	[ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindiimg $MINDI_CACHE/gz $MINDI_CACHE/mindi.iso
[747]	240	Die "User abort."
	241	}
	242
	243
	244	AddFileToCfgIfExists() {
	245	[ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
	246	}
	247
	248
	249	AddKeyboardMappingFile() {
	250	local mappath r included_list included_item i res ii sss
	251	mappath=$1
	252	KBDEPTH=$(($KBDEPTH+1))
	253	[ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
	254	if [ -e "$bigdir/$mappath" ] ; then
[3149]	255	LogFile "INFO: $mappath already added"
[747]	256	return
	257	elif [ -d "$bigdir/$mappath" ] ; then
	258	echo "Cannot add $mappath: it's a directory. Sorry."
	259	return
	260	fi
[3149]	261	LogFile "INFO: Added kbd map $mappath"
[747]	262	if [ ! -e "$mappath" ] ; then
[3149]	263	mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[747]	264	if [ ! -e "$mappath" ] ; then
[3149]	265	LogAll "WARNING: Cannot add $mappath: kbd map file not found"
[747]	266	return
	267	fi
	268	fi
	269
[3149]	270	tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log \| (cd "$bigdir" ; tar xf -) \|\| LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
[747]	271	if [ "`echo $mappath \| grep -F ".gz"`" ] ; then
[3023]	272	included_list=`gzip -dc $mappath \| grep -Fi include \| sed s/'"'//g \| cut -d' ' -f2`
[747]	273	else
[3023]	274	included_list=`grep -Fi include $mappath \| sed s/'"'//g \| cut -d' ' -f2`
[747]	275	fi
	276	for included_item in $included_list ; do
[925]	277	if [ ! -e "$included_item" ] ; then
[3149]	278	sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
[1764]	279	[ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
[925]	280	for ii in $sss ; do
[3546]	281	[ -e "$ii" ] && AddKeyboardMappingFile $ii
[925]	282	done
	283	else
	284	AddKeyboardMappingFile $included_item
	285	fi
[747]	286	done
	287	}
	288
	289
	290	CopyDependenciesToDirectory() {
[3403]	291	local outdir incoming counter d found tdir templog
[747]	292	outdir=$1
[3403]	293	templog=$MINDI_TMP/$$.log
[747]	294	mkdir -p $outdir
	295	incoming=`ReadLine`
[3522]	296	counter=$3
[3403]	297	> $templog
	298
[747]	299	while [ "$incoming" != "" ] ; do
[3522]	300	if [ "$3" = "1" ]; then
	301	counter=$(($counter+1))
	302	LogProgress $counter $2
	303	fi
[1526]	304	# Non absolute file names should not arrive till here => skipped
	305	if [ `echo "$incoming" \| cut -c1` != '/' ]; then
[3149]	306	LogAll "WARNING: Unable to handle $incoming"
[1526]	307	incoming=`ReadLine`
	308	continue
	309	fi
	310	# no parent directory of incoming should be a link, copy is not possible in that case
	311	d=`dirname "$incoming"`
	312	found="false"
	313	while [ $d != "/" -a $found = "false" ]; do
	314	[ -h "$d" ] && found="true"
	315	d=`dirname "$d"`
	316	done
[3166]	317	if [ -d "$incoming" -a ! -h "$incoming" ]; then
[3522]	318	find $incoming/* -maxdepth 0 2> /dev/null \| CopyDependenciesToDirectory $outdir 0 0
[1526]	319	elif [ -e "$incoming" ] && [ $found = "false" ]; then
[3075]	320	if [ ! -h "$incoming" ]; then
[3405]	321	tar cf - -C / $incoming 2> $templog \| (cd "$outdir" ; tar xf -) \|\| Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
[3075]	322	else
	323	tdir=`dirname "$incoming"`
	324	if [ ! -e "$outdir/$tdir" ]; then
	325	mkdir -p "$outdir/$tdir"
	326	fi
	327	cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
	328	fi
[1989]	329	# Only uncompress modules if not using udevd
	330	if [ "`echo "$incoming" \| grep "lib/modules/.\..o\.gz"`" != "" ] && [ "`ps auxww \| grep -v grep \| grep -qw udevd`" != "" ]; then
[3149]	331	gunzip -f $outdir/$incoming \|\| LogAll "WARNING: Cannot gunzip $outdir/$incoming"
[925]	332	fi
[3075]	333	[ -x "$outdir" ] && StripExecutable $outdir
[747]	334	fi
	335	incoming=`ReadLine`
	336	done
	337	}
	338
	339
	340	CountItemsIn() {
	341	local r
	342	r=0
	343	for q in $1 ; do
	344	r=$(($r+1))
	345	done
	346	echo $r
	347	}
	348
	349
	350	DropOptimizedLibraries() {
	351	local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
	352	filelist=$1
	353	outdir=$2
	354
	355	list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
	356	if [ "$list_of_optimized_libraries" = "" ] ; then
[859]	357	return 0
[747]	358	fi
	359	echo -en "Dropping i686-optimized libraries if appropriate"
	360	for optimized_lib_name in $list_of_optimized_libraries ; do
[859]	361	echo -en "."
	362	reason=""
[1483]	363	vanilla_lib_name=`echo "$optimized_lib_name" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
[859]	364	echo "$vanilla_lib_name" >> $filelist
[2963]	365	LogFile "INFO: Adding $vanilla_lib_name to filelist"
[859]	366	mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
	367	rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
[2168]	368
	369	# This may return multiple files
[3231]	370	for resolved in `mr-read-all-link $vanilla_lib_name`; do
[2963]	371	LogFile "INFO: Adding as deps $resolved to filelist"
[2168]	372	vanilla_resolved_name=`echo "$resolved" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
[3149]	373	if [ "$vanilla_resolved_name" != "$resolved" ]; then
	374	mkdir -p $outdir$resolved> /dev/null 2> /dev/null
	375	rmdir $outdir$resolved > /dev/null 2> /dev/null
	376	ln -sf $vanilla_resolved_name $outdir$resolved
	377	LogFile "INFO: Excluding deps $resolved"
	378	grep -Fvx "$resolved" "$filelist" > $filelist.tmp
	379	LogFile "INFO: Replacing it with $vanilla_resolved_name"
	380	echo "$vanilla_resolved_name" >> $filelist.tmp
	381	mv -f $filelist.tmp $filelist
	382	fi
[2168]	383	done
[747]	384	done
[925]	385	$AWK '{ print $1; }' $filelist \| sort -u > $filelist.tmp
[747]	386	mv -f $filelist.tmp $filelist
	387	echo -e "$DONE"
	388	}
	389
	390
	391	FindAndAddUserKeyboardMappingFile() {
	392	local r res mapfile mappath included_item included_list keyfile mp locale
[3149]	393	LogAll "INFO: Analyzing your keyboard's configuration."
[3231]	394	KEYDIR=/usr/lib/kbd
[747]	395	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
[3347]	396	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
	397	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
[3231]	398	[ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
[747]	399	if [ ! -e "$KEYDIR" ] ; then
[3149]	400	LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
[747]	401	return 0
[3569]	402	else
	403	LogFile "INFO: KEYDIR=$KEYDIR"
[747]	404	fi
	405	if [ -e "/etc/sysconfig/keyboard" ] ; then
[2963]	406	LogFile "INFO: Red Hat-style config detected."
[747]	407	keyfile=/etc/sysconfig/keyboard
[3257]	408	elif [ -e "/etc/vconsole.conf" ] ; then
	409	LogFile "INFO: New Fedora style config detected."
	410	keyfile=/etc/vconsole.conf
[747]	411	elif [ -e "/etc/rc.d/rc.keymap" ] ; then
[2963]	412	LogFile "INFO: Slackware-style config detected."
[747]	413	keyfile=/etc/rc.d/rc.keymap
	414	elif [ -e "/etc/rc.config" ] ; then
[2963]	415	LogFile "INFO: Debian-style config detected."
[747]	416	keyfile=/etc/rc.config
	417	elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
[2963]	418	LogFile "INFO: Debian-style config detected."
[747]	419	mkdir -p $bigdir/tmp
[3278]	420	echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
[747]	421	KBDEPTH=0
	422	mkdir -p $bigdir/etc/console
[963]	423	cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
[2864]	424	echo ""
[747]	425	echo -e "$DONE"
	426	return 0
[2828]	427	elif [ -e "/etc/console-setup/boottime.kmap.gz" ] \|\| [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
[2963]	428	LogFile "INFO: Ubuntu-style config detected."
[1713]	429	mkdir -p $bigdir/tmp
[2828]	430	if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
	431	kbdfile="/etc/console-setup/boottime.kmap.gz"
	432	else
	433	kbdfile="/etc/console-setup/cached.kmap.gz"
	434	fi
[3278]	435	echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
[1713]	436	KBDEPTH=0
	437	mkdir -p $bigdir/etc/console-setup
[2828]	438	cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
[2864]	439	echo ""
[1713]	440	echo -e "$DONE"
	441	return 0
[2744]	442	elif [ -e "/etc/rc.conf" ] ; then
[2963]	443	LogFile "INFO: ArchLinux config detected."
[2744]	444	keyfile=/etc/rc.conf
[1465]	445	elif [ -e "/etc/conf.d/keymaps" ] ; then
[2963]	446	LogFile "INFO: Gentoo-style config detected."
[1465]	447	keyfile=/etc/conf.d/keymaps
[3191]	448	elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
	449	LogFile "INFO: X11-style config detected."
	450	keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
[747]	451	else
[3149]	452	LogFile "Searching for rc.config ..."
[747]	453	keyfile=`find /etc -name rc.config \| head -n1`
	454	if [ "$keyfile" = "" ] \|\| [ ! -e "$keyfile" ] ; then
[3149]	455	LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
[747]	456	return
	457	else
[2963]	458	LogFile "INFO: Found $keyfile"
[747]	459	fi
	460	fi
	461	if [ ! -e "$KEYDIR/keymaps" ] ; then
[3149]	462	LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
[747]	463	return
	464	fi
[2963]	465	LogFile "INFO: keyfile=$keyfile"
[2999]	466	# For SLES we need to remove the .map.gz extension Cf #614
	467	locale=`grep -F KEYTABLE "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2 \| sed 's/.map.gz$//'`
[747]	468	[ ! "$locale" ] && locale=`grep '.map$' "$keyfile" \| sed 's/^.* //'` # Slackware
[3257]	469	[ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2` # Gentoo, ArchLinux & New fedora
[3191]	470	[ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" \| grep -v '^#' \| awk '{print $3}' \| tr -d '"'` # Fedora 19
[2963]	471	LogFile "INFO: locale=$locale"
[1764]	472	#
	473	# Process the keymaps dir once for all
	474	# AddKeyboardMappingFile will use it recursively
	475	#
	476	find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
	477	mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep -F "/${locale}." \| grep -vx " #."`
	478	[ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[3571]	479	# For new distro such as RHEL 7 we need that additional search
	480	[ ! "$mp" ] && mp=`grep "xkb" $MINDI_TMP/keymaps.find \| grep -E "/$locale\." \| grep -vx " #."`
[747]	481	# If we have multiple keymaps then log it !!
[3149]	482	echo "$mp" \| grep -q " " >> $LOGFILE
[747]	483	if [ $? -eq 0 ]; then
[2963]	484	LogAll "WARNING: Multiple keymaps found: $mp"
	485	LogFile "INFO: The following one will be used"
[747]	486	fi
	487	for i in $mp ; do
	488	mappath=$i
	489	[ -e "$i" ] && [ ! -d "$i" ] && break
	490	done
	491	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[2958]	492	mappath=$(find / -wholename "/kbd/keymaps//$locale \| head -1")
[747]	493	fi
[2963]	494	LogFile "INFO: mappath = $mappath"
[747]	495	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[3149]	496	LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
[747]	497	return
	498	fi
[3535]	499	echo -en "INFO: Adding keyboard mapping tables"
[747]	500	mkdir -p $bigdir/tmp
[3278]	501	echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
[2055]	502	KBDEPTH=0
[747]	503	AddKeyboardMappingFile $mappath
[2864]	504	echo ""
[747]	505	echo -e "$DONE"
[1764]	506	rm -f $MINDI_TMP/keymaps.find
[747]	507	return 0
	508	}
	509
	510
[3241]	511	FindLdlinux32Binary() {
	512	LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
	513	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
	514	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
	515	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
	516	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
[3303]	517	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
	518	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
[3241]	519	#[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 \| grep -x "/.*/ldlinux.c32"`
	520	if [ ! -e "$LDLINUXC32" ]; then
	521	LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
	522	LDLINUXC32=/tmp/idoesnthopefullyexist
	523	else
	524	LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
	525	fi
	526	}
	527
	528
[2629]	529	FindMboot32Binary() {
	530	MBOOTC32=/usr/lib/syslinux/mboot.c32
	531	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
	532	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
	533	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
	534	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
[3303]	535	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
	536	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
[2629]	537	[ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 \| grep -x "/.*/mboot.c32"`
[2921]	538	[ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[2963]	539	LogFile "INFO: Found mboot.c32 at $MBOOTC32"
[2629]	540	}
	541
[3476]	542	FindLdlinuxe64Binary() {
	543	LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
	544	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
	545	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
	546	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
	547	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
	548	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
	549	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 \| grep -x "/.*/ldlinux.e64"`
	550	[ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
	551	LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
	552	}
	553
	554	FindSyslinux64EFI() {
	555	SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
	556	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
	557	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
	558	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
	559	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
	560	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
	561	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi \| grep -x "/.*64/syslinux.efi"`
[3491]	562	[ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[3476]	563	LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
	564	}
	565
[747]	566	FindIsolinuxBinary() {
	567	ISOLINUX=/usr/lib/isolinux.bin
	568	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
[1491]	569	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
[747]	570	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
	571	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
[1491]	572	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
[3304]	573	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
[1854]	574	[ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin \| grep -x "/.*/isolinux.bin"`
[2921]	575	[ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[2963]	576	LogFile "INFO: Found isolinux.bin at $ISOLINUX"
[747]	577	}
	578
	579
	580	GenerateGiantDependencyList() {
[3522]	581	local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item tempdepfile modres noof_lines lvmversion lvmresolved
[747]	582
[3522]	583	echo -en "INFO: Analyzing dependency requirements"
[747]	584	outfile=$1
[940]	585	tempfile=$MINDI_TMP/$$.txt
[747]	586	incoming=`ReadLine`
	587
	588	> $tempfile
	589	progress=0
	590	res=0
	591	noof_lines=$2
	592	while [ "$incoming" != "" ] ; do
[861]	593	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	594	incoming=`ReadLine`
	595	continue
	596	fi
	597	if [ "$incoming" = "LVMFILES:" ] ; then
	598	break
	599	fi
[747]	600	filelist=`GenerateListForFile "$incoming"`
	601	r=$?
[3149]	602	[ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
[747]	603	res=$(($res+$r))
[2963]	604	# LogFile "INFO: '$incoming' generates filelist '$filelist'"
[747]	605	for fname in $filelist ; do
[3321]	606	[ "$fname" != "" ] && echo "$fname" >> $tempfile
[747]	607	done
	608	progress=$(($progress+1))
[3149]	609	LogProgress $progress $noof_lines
[747]	610	incoming=`ReadLine`
	611	done
[861]	612	if [ "$incoming" = "LVMFILES:" ] ; then
	613	incoming=`ReadLine`
	614	lvmversion=""
	615	while [ "$incoming" != "" ] ; do
	616	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	617	incoming=`ReadLine`
	618	continue
	619	fi
	620	filelist=`GenerateListForFile "$incoming"`
	621	for tool in $filelist ; do
	622	lvmresolved=`readlink -f $tool`
[1342]	623	if [ "$tool" = "$lvmresolved" ]; then
[861]	624	echo "$tool" >> $tempfile
	625	elif echo "$lvmresolved" \| grep "lvmiopversion" &> /dev/null ; then
	626	if [ "$lvmversion" = "" ] ; then
	627	lvmversion=`$lvmresolved`
	628	echo "$lvmresolved" >> $tempfile
	629	fi
	630	toolstripped=`echo $tool \| $AWK -F / '{print $NF;}'`
[1342]	631	if [ "$lvmversion" = "200" ]; then
[861]	632	# pvdata and lvmcreate_initrd don't exist in LVM2
	633	case "$toolstripped" in
	634	"pvdata")
	635	continue
	636	;;
	637	"lvmcreate_initrd")
	638	continue
	639	;;
	640	esac
	641	fi
	642	toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
	643	if [ -e "$toolpath" ] ; then
	644	echo "$toolpath" >> $tempfile
	645	echo "$tool" >> $tempfile
	646	else
	647	toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
	648	fi
	649	if [ -e "$toolpath" ] ; then
	650	echo "$toolpath" >> $tempfile
	651	echo "$tool" >> $tempfile
	652	else
	653	echo "Where are your LVM-Tools? Couldn't find $tool"
	654	fi
	655	else
	656	echo "$tool" >> $tempfile
	657	fi
	658	done
	659	progress=$(($progress+1))
[3149]	660	LogProgress $progress $noof_lines
[861]	661	incoming=`ReadLine`
	662	done
[747]	663	fi
[3522]	664	echo -en "$DONE\nINFO: Making complete dependency list"
[747]	665
	666	tr -s '/' '/' < $tempfile \| sort -u > $tempfile.new
	667	mv -f $tempfile.new $tempfile
	668	> $outfile.pre
	669	progress=0
	670	noof_lines=`cat $tempfile \| wc -l`
[2963]	671	LogFile "---------------------------------"
	672	LogFile "List of dependencies: "
	673	LogFile "---------------------------------"
[747]	674	for fname in `cat $tempfile` ; do
[1876]	675	echo "$fname" \| tee -a $LOGFILE >> $outfile.pre
	676	LocateDeps $fname \| tee -a $LOGFILE >> $outfile.pre
[925]	677	progress=$(($progress+1))
[3149]	678	LogProgress $progress $noof_lines
[747]	679	done
[1684]	680	if [ _"$MONDO_SHARE" != _"" ]; then
[925]	681	mkdir -p $bigdir/tmp
[3172]	682	mkdir -p $bigdir/usr/bin
[940]	683	if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
[3149]	684	LogAll "\nINFO: Incorporating post-nuke tarball"
[3522]	685	(cd "$bigdir" ; tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log)
[747]	686	fi
[963]	687	if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
[925]	688	LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
	689	else
[3565]	690	LogAll "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
	691	LogAll " I bet you've got a spare copy of Mondo or Mindi floating around on your system."
	692	LogAll " If Mindi was called by Mondo then send a bug report."
	693	LogAll " It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
	694	LogAll " Finally, run Mindi again."
[925]	695	Die "Odd."
	696	fi
[3565]	697	cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE \|\| LogAll "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
[3270]	698	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3149]	699	LogAll "\nINFO: Incorporating Network-related settings"
[3278]	700	for r in NETFS-* ; do
[963]	701	cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE \|\| Die "Cannot copy $r - did you run out of disk space?"
[2963]	702	LogFile "INFO: Copying $r to ramdisk"
[925]	703	done
	704	fi
[747]	705	fi
[925]	706	tr ' ' '\n' < $outfile.pre \| tr -s '/' '/' \| grep -Fvx "" \| sort -u \| grep -Ev "/libX11\|/libXext\|/libXi\|/libgtk\|/libgdk" > $outfile
[747]	707	rm -f $tempfile $outfile.pre
	708	[ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" \|\| echo "\nFailed."
	709	return $res
	710	}
	711
	712
	713	GenerateListForFile() {
	714	local files_found loc fname incoming i res
	715	incoming="$1"
	716	files_found=""
	717	res=0
	718
	719	for fname in $incoming ; do
	720	files_found="$files_found `LocateFile $fname`"
	721	done
	722
	723	echo "$files_found" \| tr ' ' '\n' \| sort -u \| tr '\n' ' '
	724	}
	725
	726
	727	# Returns all disk devices which are part of a raid array
	728	GetAllRaidMembers() {
	729	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]device/ if(\$2) {print \$2}" < /etc/raidtab
	730	}
	731
	732
	733	GetFileSizeList() {
	734	local i
	735	for i in `find $1 -type d -o -print` ; do
	736	du -sk $i
	737	done
	738	}
	739
	740
[1230]	741	# Check kernel filesystem capabilites for accessing initrd image
[2429]	742	# Could be ext2 FS (old mode) or initramfs (new mode)
[1230]	743	#
	744	# Interface definition:
	745	# param #1: absolute path to kernel image
	746	GetInitrdFilesystemToUse() {
	747
	748	# interface test: make sure we have one parameter
	749	if [ $# -ne 1 ]; then
	750	Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
	751	fi
	752
	753	# interface parameters
	754	local lvKernelImage=$1
	755
	756	# local constants (filesystem magic strings)
	757	local lcMagicCramfs="<3>cramfs: wrong magic"
[2047]	758	local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
[2390]	759	local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
[3353]	760	local lcMagicInitfs="<6>checking if image is initramfs...\|[<]6[>]Unpacking initramfs...\|[<]6[>]Trying to unpack rootfs image as initramfs"
[1230]	761
	762	# local variables
	763	local lvOffset
	764	local lvScanRes
	765	local lvUseFilesystem
	766
	767	# say where we are.
[3111]	768	LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
[1230]	769
	770	# verify that file exists
	771	[ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
	772
[3111]	773	# Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
[1730]	774	file $lvKernelImage 2>&1 \| grep -q gzip
[1566]	775	if [ $? -eq 0 ]; then
[3111]	776	LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
	777	lvScanRes=`gzip -cd $lvKernelImage \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
	778	else
	779	LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
	780	# kernel is x86 boot sector in RHEL3/4 with embedded gzip content
	781	# get offet of gzip magic "1f8b0800" in file (for these older kernels)
	782	lvOffset=`od -vA n -t x1 $lvKernelImage \| tr -d '[:space:]' \| awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
	783	if [ $lvOffset -eq 0 ]; then
	784	LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
	785	lvScanRes=$lcMagicInitfs
[2393]	786	else
[3111]	787	lvOffset=`expr $lvOffset / 2`
	788	LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
	789	# scan again kernel image
	790	lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
[2393]	791	fi
[3111]	792	fi
[2393]	793
[3111]	794	# determine which filesystem to use for initrd image: ext2\|3fs, gzip'ed cpio (initramfs) or cramfs
	795	if [ `echo $lvScanRes \| grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
	796	lvUseFilesystem="ext2fs"
	797	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
	798	lvUseFilesystem="ext3fs"
	799	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
	800	lvUseFilesystem="initramfs"
	801	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
	802	lvUseFilesystem="cramfs"
[2429]	803	else
[3111]	804	# In that case, we are most probably after 2.6.30 and use the supported initramfs
[3181]	805	LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
	806	LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
	807	LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep initramfs"
[1230]	808	lvUseFilesystem="initramfs"
	809	fi
[3111]	810
[1230]	811	# say what we are using
[3111]	812	LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
[1230]	813
	814	# return file system to use
	815	echo "$lvUseFilesystem"
	816
	817	}
	818
[747]	819	# Searches members of raid device
	820	# $1: raid device (/dev/md...)
	821	GetRaidDevMembers() {
[2917]	822	if [ ! -f /etc/raidtab ]; then
	823	return
	824	fi
[747]	825	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
	826	}
	827
	828
	829	ListAllPartitions() {
	830	local res currline partition all_partitions ap_orig remaining i j
	831
[2070]	832	grep -Evx " #.\| none." $MY_FSTAB \| $AWK '/^\/dev\/[imhs]d\|\|^LABEL=\/\|^UUID=/ && !/\/fdd\|\/cdr\|\/zip\|\/floppy/ {print $1}'
[747]	833	[ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
[1824]	834	if [ -e "/vmfs/volumes" ]; then
	835	# For VMWare ESX 3 get the device names of these volumes
[2431]	836	vdf -P \| grep -E '/vmfs/volumes' \| $AWK '{print $1}'
[1824]	837	fi
[747]	838	return
	839	}
	840
	841
	842	ListKernelModulePaths() {
[2583]	843	local module_list module fname r kern
[1399]	844	module_list="$MODULES"
[1230]	845	# Remove unwanted modules from list
	846	for i in $DENY_MODS; do
	847	module_list=`echo ${module_list} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
	848	done
[747]	849	###
	850	### Sq-Modification ... Use kernelname for module search path if specified
	851	###
[3231]	852	if [ "${kernelname}" != "" ]
[747]	853	then
	854	kern=${kernelname}
	855	else
[2292]	856	kern="$KERVERRUN"
[747]	857	fi
[2292]	858	export KERVER=$kern
[747]	859	###
	860	### Sq-Mod End
	861	###
[3310]	862	# Get rid of duplicates
	863	for module in `echo $module_list \| tr ' ' '\n' \| sort -u` ; do
[747]	864	r=`find /lib/modules/$kern -type f \| grep "/${module}\..*o" \| tail -n1`
[2471]	865	if [ -z "$r" ]; then
	866	if [ "`echo "$MODULES" \| grep -w $module`" ]; then
	867	r="[live module file not found]"
	868	else
	869	r="[extra module file not found]"
	870	fi
[2583]	871	else
	872	[ -f "$r" ] && echo "$r"
[2471]	873	fi
[2963]	874	LogFile "INFO: module $module --> $r"
[747]	875	done
	876	find /lib/modules/$kern/modules.* -type f 2> /dev/null
	877	}
	878
[1784]	879	#
	880	# Critical function which computes all dependencies (dyn. lib.)
	881	# for a list of binaries
	882	#
[747]	883	LocateDeps() {
	884	local incoming fname deps
[1724]	885	incoming="$*"
[3231]	886	deps=""
	887
[747]	888	for fname in $incoming ; do
	889	if [ ! -e "$fname" ] ; then
[2995]	890	LogFile "WARNING: $fname does not exist; cannot be LDD'd."
[747]	891	if echo $fname \| grep lvm &> /dev/null ; then
[2963]	892	LogFile " This warning only affects you if you are using LVM."
[1399]	893	if echo "$MODULES" \| grep lvm &> /dev/null ; then
[3231]	894	LogFile " I think you are, so please take heed!"
[747]	895	else
[3231]	896	LogFile " I don't think you are, so don't worry about it."
[747]	897	fi
	898	fi
	899	else
[3231]	900	deps="$deps $fname"
[747]	901	fi
	902	done
[3231]	903	mr-read-all-link `mr-process-ldd $deps \| sort -u` \| sort -u
[747]	904	}
	905
[925]	906
[747]	907	LocateFile() {
[3231]	908	local i j path fname_to_find location output resolved tmp stub cache_id loclist
[747]	909	fname_to_find="$1"
[1526]	910	# It's an absolute path
[3231]	911	j=`echo "$fname_to_find" \| cut -c1`
	912	if [ _"$j" = _"/" ]; then
	913	dn=`dirname $fname_to_find`
	914	# We suppose that the link is already included, just add the new file
	915	if [ -h "$dn" ]; then
	916	newdn=`readlink -f $dn`
	917	bn=`basename $fname_to_find`
	918	output="$newdn/$bn"
	919	else
	920	output="$fname_to_find"
	921	fi
[860]	922	if [ -h "$output" ] ; then
[3231]	923	output="`mr-read-all-link $output` $output"
[860]	924	fi
[859]	925	echo "$output"
	926	return 0
[747]	927	fi
[1526]	928	# It's not an absolute path
[747]	929	output=""
[1526]	930	for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
	931	#for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
	932	[ -h "$path" ] && continue
	933	[ ! -e "$path/$fname_to_find" ] && continue
	934	output="$path/$fname_to_find $output"
	935	if [ -h "$path/$fname_to_find" ] ; then
[3231]	936	output="`mr-read-all-link $path/$fname_to_find` $output"
[1526]	937	fi
[747]	938	done
	939	if [ "$output" = "" ] ; then
[860]	940	return 1
[747]	941	fi
	942	echo "$output"
	943	return 0
	944	}
	945
[3149]	946	LogProgress() {
[3293]	947	local i progress modres noof_lines title
[3149]	948
	949	progress=$1
	950	noof_lines=$2
[3293]	951	title=$3
[747]	952
[3149]	953	i=$(($progress*100))
	954	if [ $noof_lines -ne 0 ]; then
	955	i=$(($i/$noof_lines))
	956	else
	957	i=0
	958	fi
[3293]	959
	960	if [ _"$MONDO_SHARE" != _"" ]; then
	961	echo "$title $i%"
	962	else
	963	echo -en "\r\t\t\t\t\t\t\t\t"
	964	echo -en "$i"
	965	echo -en "%"
	966	modres=$(($progress%4))
	967	[ "$modres" -eq "0" ] && echo -en "\t/"
	968	[ "$modres" -eq "1" ] && echo -en "\t-"
	969	[ "$modres" -eq "2" ] && echo -en "\t\\"
	970	[ "$modres" -eq "3" ] && echo -en "\t\|"
	971	fi
[3149]	972	}
	973
[3522]	974	# Called by MakeBootInitFile, to make /tmp/$MRCFG
[747]	975	MakeMondoConfigFile() {
	976	local outfile use_lzo use_comp use_star
	977	outfile=$1
	978	> $outfile
	979	[ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
	980	[ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
[1698]	981	[ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
[747]	982	[ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
	983	[ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
	984	[ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
	985	use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
[998]	986	use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
[3149]	987	use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
[747]	988	use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
	989	use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
	990	echo "use-lzo $use_lzo" >> $outfile
[998]	991	echo "use-gzip $use_gzip" >> $outfile
[747]	992	echo "use-star $use_star" >> $outfile
[3149]	993	echo "use-lzma $use_lzma" >> $outfile
[747]	994	echo "use-comp $use_comp" >> $outfile
[3397]	995	echo "boot-type $BOOT_TYPE" >> $outfile
[747]	996	echo "datestamp `date`" >> $outfile
	997	[ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
[940]	998	AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
	999	AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
	1000	AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
[3278]	1001	AddFileToCfgIfExists $MINDI_TMP/ISO-DIR iso-dir $outfile
[940]	1002	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
	1003	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
[3278]	1004	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER bootloader.ver $outfile
[940]	1005	AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
	1006	AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
	1007	AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
[3278]	1008	AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
	1009	AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
	1010	AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
	1011
[3270]	1012	# Deal with network configuration in a portable way
	1013	if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
	1014	mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
	1015	fi
[747]	1016	}
	1017
[2618]	1018	# Get PV's for an LV
	1019	GetPVsForLV() {
[3368]	1020	if [ -n "$1" ]; then
	1021	vg=`$LVMCMD lvdisplay $1 2>/dev/null \|awk '/VG Name/{print $NF;exit}'`
	1022	if [ -z "$vg" ]; then
	1023	return
	1024	fi
	1025	$LVMCMD vgdisplay -v $vg 2>/dev/null \| awk '/PV Name/{print $NF}'
	1026	fi
[2618]	1027	}
[747]	1028
[2618]	1029
[747]	1030	MakeMountlist() {
[2907]	1031	local mountlist all_partitions current_partition \
[747]	1032	partition_size partition_format outstring partition_number \
	1033	partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
[2013]	1034	absolute_partition old_partition_fmt current_lvolume uname skip
[747]	1035
[3149]	1036	LogFile "------------------------------------"
[3522]	1037	LogFile "INFO: Your raw fstab file looks like this:"
[2963]	1038	LogFile "------------------------------------"
[747]	1039	cat $MY_FSTAB >> $LOGFILE
[3149]	1040	LogAll "-----------------------------------"
[3522]	1041	LogAll "INFO: Your mountlist will look like this:"
[3149]	1042	LogAll "-----------------------------------"
[747]	1043
[2907]	1044	# mountlist(OUT)
[747]	1045	mountlist=$1
	1046
	1047	# NB: partition = device
	1048	# NB: mountpt = where the device is mounted
	1049
	1050	[ -e "$MY_FSTAB" ] \|\| Die "Cannot find your fstab file ($MY_FSTAB)"
	1051
[3565]	1052	[ "$mountlist" != "" ] && [ "$mountlist" != "/" ] && rm -Rf $mountlist
[747]	1053	> $mountlist
	1054	all_partitions=""
	1055
	1056	if [ $LVM != "false" ]; then
[3499]	1057	LogFile "INFO: Analyzing LVM..."
[968]	1058	$MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
[971]	1059	if [ $? -ne 0 ]; then
[963]	1060	LVM="false"
	1061	fi
[2536]	1062	# Excluded LVs and GVs are not reported here
[2424]	1063	all_partitions=`cat $MINDI_TMP/lvm.res \| grep -F ">>>" \| cut -d' ' -f2-`
[747]	1064	fi
	1065	all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
	1066	for i in $IMAGE_DEVS ; do
	1067	mount \| grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
	1068	done
	1069	[ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" \| tr ' ' '\n' \| sort -u \| tr '\n ' ' '`"
[3149]	1070	printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID \| tee -a $LOGFILE
	1071	printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------ ------- ---------- \| tee -a $LOGFILE
[3028]	1072	useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
[747]	1073	for c_p in $all_partitions ; do
[2917]	1074	# Skip fd/cd devices, network FS, cifs
[2452]	1075	[ "`echo "$useless_dev" \| grep -F "$c_p"`" != "" ] \|\| [ "`echo "$c_p" \| grep ":"`" != "" ] \|\| [ "`echo "$c_p" \| grep -E "^//"`" != "" ]&& continue
[747]	1076	[ "`echo "$c_p" \| grep -x "/dev/cdroms.*"`" ] && continue
	1077	if [ -h "$c_p" ] && [ "`echo "$c_p" \| grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/md"`" = "" ] ; then
[861]	1078	current_partition=`readlink -f $c_p`
[3046]	1079	if [ "`echo "$current_partition" \| grep -F "/dev/mapper"`" != "" ]; then
	1080	current_partition="$c_p"
	1081	elif [ "`echo $current_partition \| grep -E '^/dev/dm-'`" ]; then
[3059]	1082	# For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
[3066]	1083	current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
[3046]	1084	fi
[747]	1085	[ "`echo "$useless_dev" \| grep -F "$current_partition"`" ] && continue
	1086	else
	1087	current_partition="$c_p"
	1088	fi
	1089	[ "$c_p" = "none" ] && continue
	1090	redhat_label=""
[1831]	1091	label=""
[957]	1092	uuid=""
[861]	1093	absolute_partition=`readlink -f $c_p`
[2965]	1094	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$current_partition" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[747]	1095
[1986]	1096	# set default in case we dont't find it
	1097	str_to_find_fmt_with=$current_partition
	1098
[747]	1099	# This part tries to retrieve the correct device from a LABEL line in /etc/fstab
	1100	# current_partition contains only first column of /etc/fstab
[2965]	1101	if [ "`echo "$current_partition" \| grep -i "LABEL="`" != "" ]; then
[980]	1102	redhat_label=`echo "$current_partition" \| cut -d'=' -f2`
[747]	1103	actual_dev=""
[853]	1104
	1105	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1106	if [ -x "/sbin/findfs" ]; then
[2847]	1107	actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
[853]	1108	fi
[747]	1109
[853]	1110	# 2nd try : blkid, the good way for all LABEL except swap
	1111	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[2965]	1112	actual_dev=`/sbin/blkid \| grep "$redhat_label" \| grep LABEL= \| cut -d':' -f1`
[747]	1113	# For LVM FS it will give a /dev/dm-# which should then be converted
[748]	1114	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1115	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1116	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[747]	1117	for dev in `ls /dev/mapper/*`; do
[963]	1118	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1119	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[747]	1120	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1121	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[747]	1122	break
	1123	fi
	1124	done
	1125	fi
	1126	fi
	1127
[853]	1128	# 3rd try, which works on a standard partition (ext2/3), but not on swap
[747]	1129	# For LVM gives a /dev/mapper entry
	1130	if [ "x$actual_dev" = "x" ]; then
[2965]	1131	actual_dev=`/bin/mount -l \| grep "\[$redhat_label\]" \| cut -d' ' -f1`
[747]	1132	fi
	1133
[853]	1134	# 4th try, with vol_id
[747]	1135	# SWAP only
	1136	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[2965]	1137	list_swaps=`cat /proc/swaps \| grep "/dev/" \| $AWK '{ print $1 }' `
[747]	1138	for dev_swap in $list_swaps ; do
[2965]	1139	dev_exists=`/sbin/vol_id $dev_swap \| grep "$redhat_label"`
[747]	1140	if [ "x$dev_exists" != "x" ]; then
	1141	actual_dev=$dev_swap
	1142	break;
	1143	fi
	1144	done
	1145	fi
	1146
[853]	1147	# 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
[789]	1148	# LABEL=SW-cciss/c0d0p3 (RDP)
[853]	1149	# or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
[747]	1150	# SWAP only
[2965]	1151	if [ "x$actual_dev" = "x" -a _"`echo $current_partition \| grep -iE 'LABEL=SWAP\|LABEL=SW-'`" != _"" ]; then
[2013]	1152	skip=""
[2292]	1153	uname=$KERVERRUN
[2013]	1154	[ "`echo $uname \| grep "2.4.[0-9]"`" != "" ] && skip=16
	1155	# 2.6.12 needs 16 (FC3)
	1156	[ "`echo $uname \| grep "2.6.[0-1]"`" != "" ] && skip=16
	1157	# 2.6.19 and upper needs 1052
	1158	[ "`echo $uname \| grep "2.6.19"`" != "" ] && skip=1052
	1159	[ "`echo $uname \| grep "2.6.[2-9]"`" != "" ] && skip=1052
[2892]	1160	[ "`echo $uname \| grep "3.[0-9].[0-9]"`" != "" ] && skip=1052
[2013]	1161	if [ $skip = "" ]; then
	1162	Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
	1163	fi
[853]	1164	for try_dev in `tail +2 /proc/swaps \| cut -d' ' -f1`
	1165	do
	1166	# Location of the swap label for kernel 2.6
[2013]	1167	try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
[853]	1168	if [ "x$try_dev_label" = "x$redhat_label" ]; then
[855]	1169	actual_dev=$try_dev
[853]	1170	fi
	1171	done
[747]	1172	fi
[1008]	1173
	1174	# Check if one of all those tries has known success
	1175	if [ "x$actual_dev" != "x" ]; then
	1176	current_partition=$actual_dev
	1177	else
[1885]	1178	Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
[1008]	1179	fi
[957]	1180	# This part tries to retrieve the correct device from a UUID line in /etc/fstab
	1181	# current_partition contains only first column of /etc/fstab
[2965]	1182	elif [ "`echo "$current_partition" \| grep -i "UUID="`" != "" ]; then
[980]	1183	uuid=`echo "$current_partition" \| cut -d'=' -f2`
[957]	1184	actual_dev=""
	1185
	1186	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1187	if [ -x "/sbin/findfs" ]; then
	1188	actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
	1189	fi
	1190
[1531]	1191	# 2nd try : blkid, the good way for all UUID except swap
[957]	1192	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[2965]	1193	actual_dev=`/sbin/blkid \| grep "$uuid" \| grep UUID= \| cut -d':' -f1`
[957]	1194	# For LVM FS it will give a /dev/dm-# which should then be converted
	1195	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1196	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1197	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[957]	1198	for dev in `ls /dev/mapper/*`; do
[963]	1199	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1200	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[957]	1201	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1202	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[957]	1203	break
	1204	fi
	1205	done
	1206	fi
	1207	fi
	1208
	1209	# 3th try, with vol_id
	1210	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[2965]	1211	list_dev=`mount \| grep -E '^/' \| $AWK '{ print $1 }' `
[957]	1212	for dev in $list_dev ; do
[2965]	1213	dev_exists=`/sbin/vol_id $dev \| grep "$uuid"`
[957]	1214	if [ "x$dev_exists" != "x" ]; then
	1215	actual_dev=$dev
	1216	break;
	1217	fi
	1218	done
	1219	fi
	1220
[1531]	1221	# 4th try, with dumpuuid (VMWare only ?) for swap
	1222	if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
[2965]	1223	list_dev=`cat /proc/swaps \| grep -E '^/' \| $AWK '{ print $1 }' `
[1531]	1224	for dev in $list_dev ; do
[2965]	1225	dev_exists=`/sbin/dumpuuid $dev \| grep "$uuid"`
[1531]	1226	if [ "x$dev_exists" != "x" ]; then
	1227	actual_dev=$dev
	1228	break;
	1229	fi
	1230	done
	1231	fi
	1232
[747]	1233	# Check if one of all those tries has known success
	1234	if [ "x$actual_dev" != "x" ]; then
	1235	current_partition=$actual_dev
	1236	else
[2069]	1237	Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs\|blkid\|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
[747]	1238	fi
	1239	else
[1863]	1240	# Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
	1241	# they use symlinks in fstab unrelated to what is shown in mount !
	1242	if [ _"$partition_mountpt" = _"" ]; then
[1986]	1243	# set default in case we dont't find it
[2965]	1244	for tmpp in `tr -s '\t' ' ' < $MY_FSTAB \| grep -Ev "^#" \| $AWK '{print $1}'`; do
[3084]	1245	if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
[1863]	1246	str_to_find_fmt_with=$tmpp
[2965]	1247	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$tmpp" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[1864]	1248	break;
[1863]	1249	fi
	1250	done
	1251	fi
[747]	1252	fi
	1253
[3084]	1254	# Detects noauto partitions not mounted and exclude them
	1255	partition_option=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$str_to_find_fmt_with" \| grep -vx " #." \| $AWK '{print $4}' \| head -n1`
	1256	if [ "`echo "$partition_option" \| grep -i noauto`" != "" ] && [ "`mount \| grep -w "$partition_mountpt"`" = "" ] ; then
	1257	LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
	1258	continue
	1259	fi
	1260	# Detects bind partitions and exclude them
	1261	if [ "`echo "$partition_option" \| grep -iw bind`" != "" ]; then
	1262	LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
	1263	continue
	1264	fi
	1265
[2566]	1266	# Look for devices which have to be excluded
	1267	skip=0
	1268	if [ "$MINDI_EXCLUDE_DEVS" ] ; then
[2568]	1269	l=""
[3231]	1270	list_of_devices="`mr-read-all-link $current_partition`"
[2568]	1271	for d in $list_of_devices; do
[2579]	1272	l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
[2568]	1273	done
[2618]	1274
	1275	# Remove PVs from LVs excluded
	1276	l="$l `GetPVsForLV $current_partition`"
	1277
	1278	# We want a single unique list
[3522]	1279	list_of_devices="`echo $l \| tr ' ' '\n' \| sort -u`"
[2618]	1280
[2854]	1281	for d in `echo $MINDI_EXCLUDE_DEVS \| sed 's/\|/ /g'`; do
[2568]	1282	if [ "`echo " $list_of_devices " \| grep " $d"`" != "" ]; then
[2963]	1283	LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
[2566]	1284	skip=1
	1285	continue
	1286	fi
	1287	done
	1288	fi
	1289	if [ $skip -eq 1 ]; then
	1290	continue
	1291	fi
	1292
[747]	1293	partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
[3028]	1294	# Detects iso9660 ISO images and exclude them
	1295	if [ "`echo "$partition_format" \| grep -iw iso9660`" != "" ]; then
[3064]	1296	LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
[3028]	1297	continue
	1298	fi
[747]	1299	# Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
	1300	# for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
	1301	# the former is then a link to the latter, so we test whether
	1302	# $current_partition is actually such a link or not and set
[755]	1303	# $current_lvolume accordingly. On Debian you may find more than one answer
	1304	# so we remove the one corresponding to /dev/.static
	1305	# On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
	1306	# principle is the same and we need to find the link to it as well.
	1307	# Note that $current_lvolume may well be an
[747]	1308	# ordinary device. It is just to make sure that we feed the right value
	1309	# into any of the LVM tools if possible.
	1310
[3064]	1311	current_lvolume="$current_partition"
[763]	1312	if [ $LVM = "v2" ] && [ "`echo $current_partition \| grep -E '^/dev/mapper/'`" ]; then
[755]	1313	# .static dir are a Debian specificity
[763]	1314	current_lvolume="`find /dev -lname "$current_partition" \| grep -Ev '^/dev/\.static/'`"
[755]	1315	echo $current_lvolume \| grep -q ' '
[784]	1316	if [ $? -eq 0 ]; then
[2963]	1317	LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
[755]	1318	fi
[2072]	1319	# if it's not found, it may well be a real device such as a multipath one
	1320	# /dev/mapper/mpath... Thus we revert the situation so that next test succeed
	1321	if [ _"$current_lvolume" = _"" ]; then
	1322	current_lvolume="$current_partition"
	1323	fi
[747]	1324	fi
	1325	#
	1326	# End of LVM device style variation code (other than $current_lvolume).
	1327
[745]	1328	if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
	1329	# Size computed via LVM not directly
[747]	1330	partition_size="lvm"
	1331	else
	1332	[ "`echo "$current_partition" \| grep "[0-9]"`" = "" ] && continue
	1333	[ "`echo "$current_partition" \| grep -c "^/"`" -ne "1" ] && continue
	1334	if [ "$partition_format" = "swap" ] \|\| [ "$partition_mountpt" = "swap" ] ; then
[2947]	1335	# Skip swap files
	1336	[ "`echo "$current_partition" \| grep -E "^/dev"`" = "" ] && continue
[2919]	1337	partition_size=`grep -Fv "Priority" /proc/swaps \| tr -s '\t' ' ' \| grep -F "$current_partition " \| $AWK '{print $3}'`
[747]	1338	[ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
[3368]	1339	[ "$partition_format" != "swap" ] && partition_format="swap"
[747]	1340	if [ "$partition_size" = "" ] ; then
[3368]	1341	totalsize=0
	1342	items=0
	1343	for i in `tr -s ' ' '\t' < /proc/swaps \| grep -Fv "Filename" \| cut -f3` ; do
[747]	1344	totalsize=$(($totalsize+$i))
	1345	items=$(($items+1))
[3368]	1346	done
	1347	[ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) \|\| partition_size=0
	1348	[ "$partition_size" -lt "125000" ] && partition_size=125000
	1349	LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
[747]	1350	fi
[2947]	1351	else
	1352	partition_size=`SizeOfPartition $current_partition`
[747]	1353	fi
	1354	fi
	1355	[ "$partition_mountpt" = "swap" ] && partition_format="swap"
	1356	[ "$partition_format" = "swap" ] && partition_mountpt="swap"
	1357	if [ "$partition_mountpt" = "" ] ; then
	1358	if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
	1359	if [ "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
	1360	partition_mountpt="raid"
	1361	partition_format="raid"
	1362	else
	1363	partition_mountpt="lvm"
	1364	partition_format="lvm"
	1365	fi
	1366	fi
	1367	fi
	1368	psz=$partition_size
[2963]	1369	LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
[747]	1370	[ "$psz" != "lvm" ] && psz=$(($psz/1024))
	1371	if [ "`echo " $IMAGE_DEVS " \| grep -F " $current_partition "`" != "" ] ; then
	1372	partition_mountpt="image"
	1373	old_partition_fmt=$partition_format
	1374	partition_format="`$FDISK -l 2>> $LOGFILE \| tr '*' ' ' \| tr '+' ' ' \| tr -s ' ' '\t' \| grep -w "$absolute_partition" \| cut -f5`"
	1375	partition_size=$(($partition_size+1)); # just in case
	1376	if [ "$partition_format" = "Linux" ] ; then
[2963]	1377	LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
	1378	LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
[747]	1379	partition_format=$old_partition_fmt
	1380	fi
	1381	fi
[2566]	1382
[747]	1383	if [ ! "$partition_mountpt" ] ; then
[2963]	1384	LogFile "------- $FDISK -l $qq log ------------"
[1883]	1385	for qq in "" `find /dev/ida/cd ! -name 'p' 2> /dev/null`; do
[747]	1386	partition_format=`$FDISK -l $qq 2>> $LOGFILE \| grep -w "$c_p" \| sed 's/12/\|/' \| tr -s '\t' ' ' \| cut -d'\|' -f2 \| cut -d' ' -f2-9`
	1387	[ "$partition_format" ] && break
	1388	done
[2963]	1389	LogFile "------- $FDISK log end ------------"
[747]	1390	if [ "$partition_format" = "Compaq diagnostics" ] ; then
	1391	partition_format="compaq"
	1392	elif [ ! "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
[3149]	1393	LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
[747]	1394	continue
	1395	fi
	1396	fi
[1755]	1397	if [ "$redhat_label" ]; then
	1398	label="$redhat_label"
[1756]	1399	elif [ "$uuid" ]; then
[1755]	1400	label="$uuid"
	1401	fi
[3330]	1402
	1403	# On RHEL 7 they use UUID concretely, even when not mentioned in fstab
	1404	# in order to mount the root part e.g. in grub.
	1405	# One way to solve this is to add the UUID now, if there wasn't one so it's
	1406	# restored correctly
	1407	if [ _"$label" = _"" ]; then
	1408	label=`blkid $current_partition \| perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
	1409	fi
	1410
[747]	1411	partition_format="`echo "$partition_format" \| cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
[963]	1412	[ "$partition_format" = "auto" ] && partition_format="`mount \| grep -w $current_partition \| $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
[3149]	1413	unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
[747]	1414	if [ "$current_partition" = "" ] ; then
[2963]	1415	LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
[747]	1416	elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
	1417	if [ "`grep -F device /etc/raidtab 2>/dev/null \| grep -F $current_partition`" ] ; then
	1418	partition_mountpt=raid
	1419	partition_format=raid
[3149]	1420	printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
[1755]	1421	printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1422	else
[2963]	1423	LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
[747]	1424	fi
	1425	elif [ "$partition_format" = "" ] ; then
[2963]	1426	LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
[747]	1427	elif [ "$partition_size" = "" ] ; then
[2963]	1428	LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
[747]	1429	elif [ "$partition_mountpt" = "/proc" ] \|\| [ "$partition_mountpt" = "/dev/pts" ] ; then
	1430	continue
	1431	else
	1432	if [ "$partition_format" = "dos" ] \|\| [ "$partition_format" = "msdos" ] ; then
[3522]	1433	LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
[747]	1434	partition_format="vfat"
	1435	fi
[3149]	1436	printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
[1755]	1437	printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1438	fi
	1439	done
[3149]	1440	LogAll "-----------------------------------"
[747]	1441	}
	1442
[2432]	1443	CheckMountlist() {
	1444	local file=$1
	1445	# Coherency verification
[2529]	1446	ML01=`cat $file \| wc -l`
[2995]	1447	ML02=`grep -vE ' lvm \| raid \| swap ' $file \| wc -l`
[2432]	1448	ML1=`$AWK '{print $1}' $file \| sort -u \| wc -l`
[3024]	1449	ML2=`grep -vE ' lvm \| raid \| swap ' $file \| $AWK '{print $2}' \| sort -u \| wc -l`
[2529]	1450	if [ "$ML01" -ne "$ML1" ]; then
[2963]	1451	LogFile "--------------------------------------------"
[3081]	1452	LogAll "WARNING: Duplicate device entry in mountlist"
[2963]	1453	LogFile "--------------------------------------------"
[2432]	1454	fi
[2529]	1455	if [ "$ML02" -ne "$ML2" ]; then
[2963]	1456	LogFile "--------------------------------------------"
	1457	LogAll "WARNING: Duplicate mountpoint entry in mountlist"
	1458	LogFile "------------------------------------------------"
[2432]	1459	fi
	1460	}
[747]	1461
[3476]	1462
[3522]	1463	MakeISOErrors() {
[3421]	1464
[3522]	1465	LogFile "----------- $ISO_CMD's errors --------------"
	1466	LogAll "$ISO_CMD returned the following errors:"
	1467	cat $MINDI_TMP/mkisofs.log \| tee -a $LOGFILE
	1468	LogAll "ERROR: Failed to create ISO image."
	1469	}
[3499]	1470
[3532]	1471	MakeISO() {
	1472
[3535]	1473	LogAll "INFO: Invoking $CMD ."
[3532]	1474	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
	1475	if [ $? -ne 0 ] ; then
	1476	if [ "$BOOT_TYPE" = "UEFI" ]; then
	1477	CMD=`echo $CMD \| perl -p -e 's\|--efi-boot \|-eltorito-platform 0xEF -eltorito-boot \|; s\|-efi-boot \|-eltorito-platform 0xEF -eltorito-boot \|;'`
	1478	LogAll "INFO: Invoking instead $CMD"
	1479	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
	1480	if [ $? -eq 0 ] ; then
	1481	LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
	1482	else
	1483	MakeISOErrors
	1484	fi
	1485	else
	1486	MakeISOErrors
	1487	fi
	1488	else
	1489	LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
	1490	fi
	1491	rm -f $MINDI_TMP/mkisofs.log
	1492	}
	1493
[3522]	1494	MakeBootableDevice() {
[3499]	1495
[3522]	1496	local target tbc retval part size mount_opt
	1497
	1498	target="$1"
	1499
	1500	rm -Rf $MINDI_TMP/target
	1501	mkdir -p $MINDI_TMP/target/{images,archives,tmp}
	1502
	1503	LogAll "INFO: Copying $MINDI_CACHE/*.gz to $MINDI_TMP/target/images"
	1504	cp -f $MINDI_CACHE/*.gz $MINDI_TMP/target/images 2>> $LOGFILE \|\| LogAll "WARNING: MakeBootableDevice: Cannot copy files to $MINDI_TMP/target/images"
	1505	for i in memdisk memtest.bin memtest.img ; do
	1506	j=$MINDI_LIB/$i
	1507	k=$MINDI_TMP/target
	1508	if [ -e "$j" ] ; then
	1509	LogAll "INFO: Copying $j to $k"
	1510	cp -f $j $k 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $k"
	1511	cp -f $j $MINDI_TMP 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $MINDI_TMP"
	1512	if [ _"$MONDO_SHARE" != _"" ]; then
	1513	cp -f $j $MONDO_ROOT 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $MONDO_ROOT"
[3499]	1514	fi
[3522]	1515	fi
	1516	done
[3499]	1517
[3522]	1518	retval=0
	1519	LogAll "INFO: Copying $kernelpath to $MINDI_TMP/target/vmlinuz"
	1520	cp $kernelpath $MINDI_TMP/target/vmlinuz 2>> $LOGFILE
[3528]	1521	if [ $? -ne 0 ] ; then
[3522]	1522	LogAll "ERROR: Failed to copy $kernelpath $MINDI_TMP/target/"
	1523	retval=$(($retval+1))
	1524	fi
	1525	LogAll "INFO: Copying $MINDI_TMP/initrd.img to $MINDI_TMP/target/initrd.img"
	1526	cp $MINDI_TMP/initrd.img $MINDI_TMP/target/ 2>> $LOGFILE
[3528]	1527	if [ $? -ne 0 ] ; then
[3522]	1528	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MINDI_TMP/target/"
	1529	retval=$(($retval+1))
	1530	fi
[3421]	1531
[3522]	1532	# copy boot stuff now generated in PrepareDataDiskImage
	1533	if [ "$BOOT_TYPE" = "UEFI" ]; then
	1534	(cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
	1535	tbc="EFI"
[3528]	1536	# Also prepare a BIOS compatible boot
	1537	if [ "$target" = "ISO" ]; then
	1538	cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
	1539	fi
[3522]	1540	else
	1541	(cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
	1542	tbc="syslinux"
	1543	if [ -f "$MINDI_TMP/target/$tbc/syslinux.cfg" ]; then
	1544	LogFile "----------- syslinux's conf --------------"
	1545	cat $MINDI_TMP/target/$tbc/syslinux.cfg >> $LOGFILE
	1546	LogFile "------------------------------------------"
	1547	fi
	1548	if [ "$target" = "ISO" ]; then
	1549	cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
[3528]	1550	if [ $? -ne 0 ] ; then
[3522]	1551	LogAll "ERROR: Failed to copy $ISOLINUX to $MINDI_TMP/target/$tbc"
	1552	retval=$(($retval+1))
[3476]	1553	fi
[3522]	1554	fi
	1555	fi
[3476]	1556
[3522]	1557	if [ "$ARCH" != "ia64" ] ; then
	1558	if [ $KERNEL_IS_XEN = "yes" ]; then
	1559	FindMboot32Binary
	1560	cp $xenkernelpath $MINDI_TMP/target/xen.gz 2>> $LOGFILE
[3528]	1561	if [ $? -ne 0 ] ; then
[3522]	1562	LogAll "ERROR: Failed to copy $xenkernelpath to $MINDI_TMP/target/"
	1563	retval=$(($retval+1))
[1885]	1564	fi
[3522]	1565	cp $MBOOTC32 $MINDI_TMP/target/$tbc/mboot.c32 2>> $LOGFILE
[3528]	1566	if [ $? -ne 0 ] ; then
[3522]	1567	LogAll "ERROR: Failed to copy $MBOOTC32 to $MINDI_TMP/target/$tbc"
	1568	retval=$(($retval+1))
	1569	fi
[747]	1570	fi
[3522]	1571	fi
[3499]	1572
[3522]	1573	MakeMessageFile $MINDI_TMP/target/$tbc \| cut -c1-80 > $MINDI_TMP/target/$tbc/message.txt
	1574
	1575	if [ _"$MONDO_SHARE" != _"" ]; then
	1576	cp -rf $MINDI_TMP/target/$tbc $MONDO_ROOT 2>> $LOGFILE
[3528]	1577	if [ $? -ne 0 ] ; then
[3522]	1578	LogAll "ERROR: Failed to copy $MINDI_TMP/target/$tbc to $MONDO_ROOT"
	1579	LogAll " Please check the target directory."
	1580	retval=$(($retval+1))
	1581	fi
	1582	if [ $KERNEL_IS_XEN = "yes" ]; then
	1583	cp -f $MINDI_TMP/target/xen.gz $MONDO_ROOT 2>> $LOGFILE
[3528]	1584	if [ $? -ne 0 ] ; then
[3522]	1585	LogAll "ERROR: Failed to copy $MINDI_TMP/target/xen.gz to $MONDO_ROOT"
	1586	LogAll " Please check the target directory."
	1587	retval=$(($retval+1))
[3476]	1588	fi
[747]	1589	fi
[3522]	1590	cp -f $MONDO_SHARE/autorun $MINDI_TMP/target 2>> $LOGFILE
[3527]	1591	cp -f $MINDI_TMP/target/vmlinuz $MONDO_ROOT 2>> $LOGFILE
[3528]	1592	if [ $? -ne 0 ] ; then
[3527]	1593	LogAll "ERROR: Failed to copy $MINDI_TMP/vmlinuz to $MONDO_ROOT"
	1594	LogAll " Please check the target directory."
	1595	retval=$(($retval+1))
	1596	fi
	1597	cp -f $MINDI_TMP/target/initrd.img $MONDO_ROOT 2>> $LOGFILE
[3528]	1598	if [ $? -ne 0 ] ; then
[3527]	1599	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MONDO_ROOT"
	1600	LogAll " Please check the target directory."
	1601	retval=$(($retval+1))
	1602	fi
[3522]	1603	fi
[747]	1604
[3522]	1605	if [ -f "$MINDI_TMP/$MRCFG" ]; then
	1606	cp -f $MINDI_TMP/$MRCFG $MINDI_TMP/target/tmp
	1607	fi
[747]	1608
[3522]	1609	LogFile "----------- target dir content -----------"
	1610	LogFile "------------------------------------------"
	1611	ls -lR $MINDI_TMP/target >> $LOGFILE
	1612	LogFile "------------------------------------------"
	1613	LogFile "----------- target dir sizes -------------"
	1614	du -sk $MINDI_TMP/target/* >> $LOGFILE
	1615	LogFile "------------------------------------------"
[3476]	1616
[3522]	1617	if [ "$retval" -ne "0" ] ; then
	1618	LogFile "--------------------------------"
	1619	LogFile "INFO: Size of $MINDI_TMP/target:"
	1620	du -sk $MINDI_TMP/target/* >> $LOGFILE
	1621	LogFile "--------------------------------"
	1622	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
[3546]	1623	sync
[3522]	1624	umount $MINDI_TMP/target
	1625	LogAll "ERROR: Problems while creating boot media."
	1626	LogAll " Please unload some of your modules and try again."
	1627	Die " Try to increase EXTRA_SPACE in $MINDI_CONFIG"
	1628	fi
[3476]	1629
[3522]	1630	mkdir -p $MINDI_TMP/mpt
[1684]	1631
[3522]	1632	if [ "$target" = "USB" ]; then
	1633	LogAll "INFO: Transforming $USBDEVICE in a Bootable device"
	1634	LogAll "INFO: Checking $USBDEVICE"
[2924]	1635	$FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
[1684]	1636	if [ $? -ne 0 ]; then
[2963]	1637	LogAll "ERROR: Unable to access $USBDEVICE"
[3086]	1638	LogAll " Make sure your USB device is plugged in"
[2963]	1639	MindiExit -1
[1684]	1640	fi
[3149]	1641	# Some distro do auto mount at that point (Ubuntu)
[3522]	1642	LogAll "INFO: Unmounting $USBPART just in case"
[3546]	1643	sync
[1721]	1644	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[3419]	1645	if [ "$BOOT_TYPE" = "BIOS" ]; then
[3403]	1646	# If your key has no MBR it may cause an issue
	1647	# Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
	1648	if [ -r $MBRFILE ]; then
	1649	LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
[3522]	1650	dd if=$MBRFILE of=$USBDEVICE >> $LOGFILE 2>> $LOGFILE
[3403]	1651	else
	1652	LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
	1653	LogAll " on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
	1654	fi
[2855]	1655	fi
[3522]	1656	LogAll "INFO: Preparing $USBDEVICE"
[2851]	1657	cat > $MINDI_TMP/fdisk.txt << EOF
[2057]	1658	d
	1659	d
	1660	d
	1661	d
[1684]	1662	n
	1663	p
	1664	1
	1665
	1666
	1667	t
	1668	b
	1669	a
	1670	1
	1671	w
	1672	EOF
[2851]	1673	$FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
[1684]	1674	if [ $? -ne 0 ]; then
[2963]	1675	LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
[3086]	1676	LogAll " Make sure your USB device is plugged in"
[1684]	1677	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1678	MindiExit -1
	1679	fi
[2963]	1680	LogFile "fdisk build file"
	1681	LogFile "----------------"
[2851]	1682	cat $MINDI_TMP/fdisk.txt >> $LOGFILE
[2963]	1683	LogFile "----------------"
[2924]	1684	rm -f $MINDI_TMP/fdisk.txt
[3522]	1685	LogAll "INFO: The USB device $USBDEVICE now looks like this:"
[2190]	1686	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
[3006]	1687	# Calling kpartx in case devices were not created
[3033]	1688	if [ -x "/sbin/kpartx" ]; then
[3027]	1689	/sbin/kpartx -a $USBDEVICE
	1690	fi
[2461]	1691	# Some distro do auto mount at that point (Ubuntu)
[3522]	1692	LogAll "INFO: Unmounting $USBPART just in case again"
[3546]	1693	sync
[2461]	1694	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[3086]	1695	# Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
	1696	if [ "`which dmsetup`" != "" ]; then
[3368]	1697	block_id="`echo $USBPART \| sed 's/\/dev\///g'`"
	1698	if [[ "`dmsetup ls \| awk '{print $1}' \| grep $block_id`" != "" ]]; then
[3522]	1699	LogAll "INFO: Removing $block_id from device mapper."
[3368]	1700	sleep 1
	1701	dmsetup remove $block_id
	1702	fi
	1703	fi
[3522]	1704	part=$USBPART
	1705	mount_opt=""
	1706	else
	1707	# ISO image
	1708	part=$MINDI_TMP/mindi-bootroot.img
	1709	size=`du -sk $MINDI_TMP/target 2> /dev/null \| cut -f1`
	1710	# Adds 10 MB to allow for additional space
	1711	size=$(($size+10000))
	1712	LogAll "INFO: Creating a $size KB empty file for boot device of the ISO image"
	1713	dd if=/dev/zero of=$part bs=1k count=$size &> /dev/null \|\| Die "Cannot dd blank $part"
	1714	mount_opt="-o loop"
	1715	fi
	1716
	1717	LogAll "INFO: Creating a vfat filesystem on $part"
[3531]	1718
	1719	mkfs.vfat $part 2>&1 >> $LOGFILE
[3522]	1720	if [ $? -ne 0 ]; then
	1721	LogAll "ERROR: Unable to create a vfat filesystem on $part"
	1722	if [ "$target" = "USB" ]; then
	1723	LogAll " Make sure your USB device is plugged in and partitioned ($part must exist on it)"
[1684]	1724	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1725	fi
[3522]	1726	MindiExit -1
	1727	fi
[3532]	1728	if [ "$target" = "ISO" ]; then
	1729	if [ "$BOOT_TYPE" = "BIOS" ]; then
	1730	# syslinux should be run on a local file (doen't work through NFS Cf: #297)
	1731	# and run after the formating for versions > 6 it seems
	1732	syslinux $part >> $LOGFILE 2>> $LOGFILE
	1733	fi
	1734	fi
[3522]	1735	LogAll "INFO: Mounting $part on $MINDI_TMP/mpt"
	1736	mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
	1737	if [ $? -ne 0 ]; then
	1738	LogAll "ERROR: Unable to mount $part on $MINDI_TMP/mpt"
	1739	if [ "$target" = "USB" ]; then
	1740	LogAll " Make sure your USB device is plugged in, partitioned and formated ($part must exist on it)"
[1684]	1741	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1742	fi
[3522]	1743	MindiExit -1
	1744	fi
	1745
	1746	LogAll "INFO: Moving boot info on $MINDI_TMP/mpt"
	1747	mv $MINDI_TMP/target/* $MINDI_TMP/mpt
[3528]	1748	if [ $? -ne 0 ] ; then
[3522]	1749	LogFile "--------------------------------"
	1750	LogFile "INFO: Size of $MINDI_TMP/mpt:"
	1751	du -sk $MINDI_TMP/mpt/* >> $LOGFILE
	1752	LogFile "--------------------------------"
[3546]	1753	sync
[3522]	1754	umount $MINDI_TMP/mpt
	1755	LogAll "ERROR: Problems while creating boot media."
	1756	LogAll " Please unload some of your modules and try again."
	1757	Die " Try to increase EXTRA_SPACE in $MINDI_CONFIG"
	1758	fi
	1759
	1760	if [ "$target" = "ISO" ]; then
[3534]	1761	if [ "$ARCH" != "ia64" ]; then
	1762	ISO_OPT="$ISO_OPT -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
	1763	fi
[3522]	1764	# ISO
[3533]	1765	if [ "$ARCH" != "ia64" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
[3534]	1766	CMD="$ISO_CMD $ISO_OPT"
[3532]	1767	MakeISO
[3522]	1768	else
[3534]	1769	if [ "$ARCH" = "ia64" ]; then
	1770	CMD="$ISO_CMD $ISO_OPT -b images/mindi-bootroot.img -c images/boot.cat"
	1771	else
	1772	# UEFI
	1773	echo "$CMD" \| grep -q "xorriso"
	1774	if [ $? -eq 0 ]; then
	1775	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot --efi-boot images/mindi-bootroot.img -no-emul-boot"
	1776	else
	1777	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
	1778	fi
	1779	fi
[3522]	1780	fi
	1781	fi
	1782
[3546]	1783	# Avoids graphical tool to keep the FS mounted
	1784	sync
[3522]	1785	umount $MINDI_TMP/mpt \|\| Die "Unable to unmount $MINDI_TMP/mpt"
	1786
	1787	if [ "$target" = "ISO" ]; then
[3532]	1788	cp $part $MINDI_CACHE
[3533]	1789	if [ "$ARCH" = "ia64" ] \|\| [ "$BOOT_TYPE" = "UEFI" ]; then
[3535]	1790	# We just need the EFI dir and the boot image for this case
[3536]	1791	mkdir -p $MINDI_TMP/mpt2 $MINDI_TMP/mpt/images $MINDI_TMP/mpt/archives
[3535]	1792	mount -o loop $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt2 2>> $LOGFILE
	1793	# We need again the kernel+initrd at the root for UEFI boot at least
	1794	cp -a $MINDI_TMP/mpt2/EFI $MINDI_TMP/mpt2/vmlinuz $MINDI_TMP/mpt2/initrd.img $MINDI_TMP/mpt
	1795	# We need the boot image now and what mindi needs at restore time as well
	1796	cp -a $MINDI_TMP/mpt2/images/all.tar.gz $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt/images
[3546]	1797	# Avoids graphical tool to keep the FS mounted
	1798	sync
[3535]	1799	umount $MINDI_TMP/mpt2
	1800	LogFile "----------- target dir content -----------"
	1801	LogFile "------------------------------------------"
	1802	ls -lR $MINDI_TMP/mpt >> $LOGFILE
	1803	LogFile "------------------------------------------"
[3532]	1804	MakeISO
[3522]	1805	fi
	1806	else
	1807	# USB
[1684]	1808	if [ "$ARCH" != "ia64" ] ; then
[2939]	1809	syslinux -v 2>&1 \| grep -q 4.02
	1810	if [ $? -eq 0 ]; then
	1811	# This buggy version of syslinux requires a call to --stupid and not -s
	1812	syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
	1813	res=$?
	1814	else
	1815	syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
	1816	res=$?
	1817	fi
	1818	if [ $res -ne 0 ] ; then
[2963]	1819	LogAll "----------- syslinux's errors --------------"
[1684]	1820	cat $MINDI_TMP/syslinux.log \|tee -a $LOGFILE
[2963]	1821	LogAll "------------------------------------------"
[3565]	1822	LogAll "ERROR: Failed to create USB image."
[1684]	1823	else
[2963]	1824	LogFile "INFO: Created bootable USB image on $USBDEVICE"
[1684]	1825	fi
	1826	rm -f $MINDI_TMP/syslinux.log
	1827	else
[2963]	1828	LogAll "ERROR: No USB boot support for ia64"
[1684]	1829	MindiExit -1
	1830	fi
[3522]	1831	fi
[1684]	1832	}
	1833
	1834
[3522]	1835	OfferToMakeBootableUSB() {
	1836
	1837	local i files
	1838
	1839	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
	1840	echo -en "\nShall I make a bootable USB device ? (y/[n]) "
	1841	read i
	1842	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1843	if [ "$USBDEVICE" = "" ]; then
	1844	echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
	1845	read dev
	1846	USBDEVICE=$dev
	1847	fi
	1848	echo "WARNING: This will erase all content on $USBDEVICE"
	1849	echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
	1850	read i
	1851	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1852	else
	1853	if [ "$PROMPT_MAKE_USB_IMAGE" = "no" ] && [ _"$MONDO_SHARE" = _"" ] && [ "$USBDEVICE" = "" ]; then
	1854	Die "No USBDEVICE environment variable declared, aborting"
	1855	fi
	1856	fi
	1857	USBPART="${USBDEVICE}1"
	1858
	1859	MakeBootableDevice USB
	1860	}
	1861
	1862
	1863	OfferToMakeBootableISO() {
	1864
	1865	local i files
	1866
	1867	if [ -z "$ISO_CMD" ]; then
	1868	LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
	1869	return
	1870	fi
	1871
	1872	if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
	1873	echo -en "\nShall I make a bootable CD image? (y/[n]) "
	1874	read i
	1875	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1876	fi
	1877
	1878	MakeBootableDevice ISO
	1879
	1880	}
	1881
	1882
[747]	1883	MakeMessageFile() {
[2292]	1884
	1885	if [ -x "/bin/lsb_release" ]; then
	1886	DESC=`/bin/lsb_release -d \| cut -d: -f2 \| sed "s/[ \t]*//"`
[3173]	1887	elif [ -r /etc/arch-release ]; then # this code must be written before /etc/issue test to avoid errors
	1888	DESC="Arch Linux"
	1889	if [ -r /var/log/pacman.log ]; then
	1890	# there are no releases but we can get the last system upgrade
	1891	# Output example: Arch Linux [2011-03-03 01:39]
	1892	DESC="$DESC $(tac /var/log/pacman.log \| grep -m1 'full system upgrade' \| cut -d']' -f1)]"
[2754]	1893	fi
[3426]	1894	elif [ -x "/etc/os-release" ]; then
	1895	DESC=`grep PRETTY_NAME /etc/os-release \| cut -d= -f2`
	1896	elif [ -x "/usr/bin/pbdistrocheck" ]; then
	1897	# For pb >= 0.9.8
	1898	DESC=`/usr/bin/pbdistrocheck -s \| cut -d, -f1-4 \| sed 's/,/-/g'`
[2732]	1899	elif [ -r /etc/issue.net ]; then
[2731]	1900	DESC=`head -1 /etc/issue.net`
[2732]	1901	elif [ -r /etc/issue ]; then
[2731]	1902	DESC=`head -1 /etc/issue`
[747]	1903	else
[2731]	1904	DESC="Unknown desc"
[747]	1905	fi
[2292]	1906	sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt \| sed "s/KKKKK/Kernel $KERVER/" \| sed "s/AAAAA/on a $ARCH architecture/" \| sed "s/TTTTT/`LC_TIME=C date`/" \| sed "s/MMMMM/`hostname`/" \| sed "s/DDDDD/$DESC/"
[1885]	1907	if [ _"$MONDO_SHARE" != _"" ]; then
	1908	if [ "$CDRECOVERY" != "yes" ] ; then
[3270]	1909	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3281]	1910	echo -en "Press <0eenter07> for 0cnetwork restore07\n"
[3278]	1911	echo -en "$BOOT_MEDIA_MESSAGE"
[1885]	1912	elif [ ! "$MINDI_TMP" ] ; then
[3522]	1913	echo -en "FYI, this is _not_ a MondoRescue CD.\n"
	1914	if [ -e "$MINDI_LIB/memtest.img" ] ; then
	1915	echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
	1916	fi
[1885]	1917	else
	1918	echo -en "$BOOT_MEDIA_MESSAGE"
[747]	1919	fi
[1983]	1920	else
	1921	echo -en "\
[747]	1922	To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
	1923	CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
[1983]	1924	fi
[747]	1925	fi
[3173]	1926
	1927	# Also create the other help screens
	1928	head -24 $MINDI_CONF/README.bootparam \| cut -c1-80 > $1/boot1.txt
	1929	head -48 $MINDI_CONF/README.bootparam \| tail -24 \| cut -c1-80 > $1/boot2.txt
	1930	head -24 $MINDI_CONF/README.pxe \| cut -c1-80 > $1/pxe.txt
[747]	1931	}
	1932
	1933
[1983]	1934	MakeBootConfFile() {
[1885]	1935	local options i ooo
[747]	1936	options=""
[1983]	1937	# Type of boot file (elilo or syslinux/isolinux)
	1938	type=$1
	1939	if [ "$type" = "elilo" ]; then
	1940	sep="="
[3398]	1941	sepdef="="
[1983]	1942	else
	1943	sep=" "
[3398]	1944	sepdef=" "
	1945	if [ "$type" = "grub" ]; then
	1946	sepdef="="
	1947	fi
[1983]	1948	fi
[925]	1949
[1983]	1950	# Generic header for conf file
[3398]	1951	if [ "$type" = "elilo" ]; then
	1952	echo -en "prompt\n"
	1953	elif [ "$type" = "grub" ]; then
	1954	echo -en "pause Press a key when ready to restore\n"
[3518]	1955	elif [ "$type" = "grub2" ]; then
	1956	echo -en "set "
[3398]	1957	else
[3535]	1958	# syslinux family
[3173]	1959	echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
[925]	1960	fi
[1983]	1961
	1962	# Compute which default option to boot from
[3398]	1963	echo -en "default${sepdef}"
[747]	1964	if [ "$CDRECOVERY" = "yes" ] ; then
[3398]	1965	if [ "$type" = "grub" ]; then
[3430]	1966	# TODO: Which num ???
[3398]	1967	echo -en "0\n"
	1968	else
	1969	echo -en "RESTORE\n"
	1970	fi
[1983]	1971	# In case it's mondoarchive
[1885]	1972	elif [ _"$MONDO_SHARE" != _"" ]; then
[3270]	1973	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3398]	1974	if [ "$type" = "grub" ]; then
	1975	echo -en "3\n"
	1976	else
	1977	echo -en "iso\n"
	1978	fi
[747]	1979	else
[3398]	1980	if [ "$type" = "grub" ]; then
	1981	echo -en "1\n"
	1982	else
	1983	echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
	1984	fi
[747]	1985	fi
	1986	else
[3398]	1987	if [ "$type" = "grub" ]; then
	1988	echo -en "0\n"
	1989	else
	1990	echo -en "expert\n"
	1991	fi
[747]	1992	fi
	1993
[1983]	1994	# Handle timeout
[3518]	1995	if [ "$type" = "grub" ]; then
	1996	sep='='
	1997	fi
[747]	1998	if [ "$CDRECOVERY" != "yes" ] ; then
[3053]	1999	echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
[1983]	2000	else
	2001	echo -en "timeout${sep}10000\n"
[747]	2002	fi
	2003	echo -en "\n"
[1983]	2004
[2124]	2005	# prepare which labels will be generated
[747]	2006	if [ "$CDRECOVERY" = "yes" ] ; then
[925]	2007	options="RESTORE expert"
[1885]	2008	else
	2009	if [ _"$MONDO_SHARE" != _"" ]; then
[2344]	2010	options="interactive expert compare iso nuke isonuke"
[747]	2011	else
	2012	options="expert"
[925]	2013	fi
[747]	2014	fi
[1983]	2015
	2016	# Generate rest of conf file
[747]	2017	for i in $options ; do
[925]	2018	ooo=$i
[3111]	2019	[ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
[1983]	2020	if [ "$type" = "elilo" ]; then
[2564]	2021	outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
[3398]	2022	elif [ "$type" = "grub" ]; then
[3415]	2023	outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
[3518]	2024	elif [ "$type" = "grub2" ]; then
[3535]	2025	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2026	lorder="linuxefi"
	2027	iorder="initrdefi"
	2028	else
	2029	lorder="linux"
	2030	iorder="initrd"
	2031	fi
	2032	outstr="menuentry '$i' {\n\tinsmod all_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod part_gpt\n\tinsmod ext2\n\tinsmod xfs\n\techo 'Loading kernel...'\n\t$lorder /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\techo 'Loading ramdisk...'\n\t$iorder /initrd.img\n}\n"
[925]	2033	else
[2073]	2034	ps="/"
[2629]	2035	if [ $KERNEL_IS_XEN = "no" ]; then
	2036	outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
	2037	else
	2038	outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
	2039	fi
[925]	2040	fi
[1885]	2041	echo -en "$outstr"
[747]	2042	done
[1983]	2043	if [ -e "$MINDI_LIB/memtest.img" ] ; then
	2044	if [ "$type" = "elilo" ]; then
	2045	echo -en "image=/memtest.bin\n\tlabel=memtest\n"
[2073]	2046	echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
[3398]	2047	elif [ "$type" = "grub" ]; then
[3415]	2048	echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
[3518]	2049	elif [ "$type" = "grub2" ]; then
	2050	echo -en "menuentry 'memtest' {\n\tload_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod xfs\n\tlinux /memtest\n\tinitrd /memtest.img\n}\n"
[1983]	2051	else
[2073]	2052	ps="/"
	2053	if [ "$type" = "syslinux" ]; then
	2054	ps=""
	2055	fi
	2056	echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
	2057	echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
[1983]	2058	fi
	2059	fi
[747]	2060	}
	2061
[2006]	2062	ParseModprobeForIncludes() {
	2063	local MODPROBE_CONF mpincfile includes include
	2064
	2065	MODPROBE_CONF=/etc/modprobe.conf
	2066	mpincfile=$1
	2067	touch $mpincfile
	2068	if [ -a $MODPROBE_CONF ]; then
[2431]	2069	includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF\|sort -u)
[2006]	2070	if [ -n "$includes" ]; then
	2071	for include in $includes
	2072	do
	2073	if [ -a "$include" ]; then
	2074	echo $include >> $mpincfile
	2075	fi
	2076	done
	2077	fi
	2078	fi
	2079	}
	2080
	2081
[747]	2082	PrepareDataDiskImages() {
[3522]	2083	local needlist bigdir diskdir res i j k lines lfiles includefile
[747]	2084
[3407]	2085	rm -f $MINDI_CACHE/mindi.iso
[940]	2086	needlist=$MINDI_TMP/what-we-need.txt
	2087	bigdir=$MINDI_TMP/bigdir
[747]	2088	mkdir -p $bigdir/usr/bin
[1983]	2089	mkdir -p $bigdir/usr/sbin
[2006]	2090	includefile=$MINDI_TMP/$$.includefile.txt
[747]	2091
[3149]	2092	lfiles=`ls $DEPLIST_DIR/* \| grep -v /minimal`
[2409]	2093	if [ -e "$DEPLIST_FILE" ]; then
[3149]	2094	lfiles="$DEPLIST_FILE $lfiles"
[2409]	2095	fi
[1885]	2096	lines=`grep -vx " #." $lfiles \| grep -vx "" \| wc -l`
[2006]	2097	ParseModprobeForIncludes $includefile
[2019]	2098	lines=$(($lines+`cat $includefile \| wc -l`))
[2006]	2099	cat $lfiles $includefile \| GenerateGiantDependencyList $needlist $lines
[747]	2100	res=$?
[2006]	2101	rm -f $includefile
[3231]	2102	ListKernelModulePaths >> $needlist
[747]	2103	if [ "$res" -ne "0" ] ; then
[1902]	2104	Die "You have $res files present in dependency list\nbut absent from filesystem."
[747]	2105	fi
	2106	mkdir -p $bigdir/tmp
[1885]	2107	if [ _"$MONDO_SHARE" != _"" ]; then
[3430]	2108	# TODO: no reason to have the cfg file stored twice
[3278]	2109	MakeMondoConfigFile $MINDI_TMP/$MRCFG
	2110	cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
[747]	2111	fi
[3281]	2112
	2113	# Needs to be done after the MRCFG creation
	2114	FindAndAddUserKeyboardMappingFile
	2115
[3166]	2116	[ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
[747]	2117	DropOptimizedLibraries $needlist $bigdir
[3522]	2118	echo -en "INFO: Assembling dependency files"
[747]	2119
[3522]	2120	CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist` 1
	2121	echo -e "$DONE"
[3149]	2122
[925]	2123	# also copy io.sys and msdos.sys, if we can find them
[747]	2124	for i in `mount \| cut -d' ' -f3` ; do
[925]	2125	for j in io.sys msdos.sys ; do
[963]	2126	[ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
[925]	2127	done
[747]	2128	done
	2129
[925]	2130	# master boot record, too
[940]	2131	i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
[3403]	2132	if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
[3149]	2133	LogAll "INFO: Backing up $i's MBR"
[925]	2134	dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
	2135	sleep 1
	2136	sync
	2137	j=$i
	2138	[ -h "$j" ] && j=`readlink -f $j`
[3149]	2139	LogAll "INFO: Creating /dev/boot_device ($j)"
[925]	2140	mkdir -p $bigdir/dev
[2089]	2141	cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE \|\| Die "Unable to create /dev/boot_device on ramdisk"
[747]	2142	fi
	2143
[1983]	2144	# Get terminfo content
	2145	ti="usr/share/terminfo/l"
	2146	if [ -d /$ti ]; then
[3522]	2147	mkdir -p $bigdir/$ti
	2148	cp -Rdf /$ti/* $bigdir/$ti 2>> $LOGFILE \|\| LogAll "ERROR: issue copying terminfo"
[747]	2149	fi
[1764]	2150	if [ -e "$MONDO_SHARE/restore-scripts" ]; then
[3543]	2151	cp -Rdf $MONDO_SHARE/restore-scripts/mondo/* $bigdir/usr/bin 2>> $LOGFILE
[3528]	2152	[ $? -ne 0 ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
[3543]	2153	cp -Rdf $MONDO_SHARE/restore-scripts/etc/* $bigdir/etc 2>> $LOGFILE
[747]	2154	fi
[2290]	2155	if [ -d "/lib/dev-state" ]; then
[3542]	2156	cp -a /lib/dev-state $bigdir/lib/ 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
[2290]	2157	fi
[747]	2158	TOTAL_BIGDIR_SIZE=`du -sk $bigdir \| cut -f1`
[940]	2159	MakeMountlist $MINDI_TMP/mountlist.txt
[2432]	2160	CheckMountlist $MINDI_TMP/mountlist.txt
[1902]	2161	mkdir -p $bigdir/tmp
[2092]	2162	cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE \|\| Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
[1885]	2163	if [ _"$MONDO_SHARE" != _"" ]; then
[1902]	2164	cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
[1885]	2165	fi
[2032]	2166	if [ $LVM != "false" ]; then
	2167	$MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
[3528]	2168	if [ $? -ne 0 ]; then
[2032]	2169	LVM="false"
	2170	rm -f $bigdir/tmp/i-want-my-lvm
[2552]	2171	else
[2963]	2172	LogFile "Your i-want-my-lvm file content is:"
	2173	LogFile "-----------------------------------"
[2552]	2174	cat $bigdir/tmp/i-want-my-lvm >> $LOGFILE
[2963]	2175	LogFile "-----------------------------------"
[2032]	2176	fi
	2177	fi
[3522]	2178	LogFile "INFO: Your mountlist.txt file content is:"
[2963]	2179	LogFile "-----------------------------------"
[1902]	2180	cat $bigdir/tmp/mountlist.txt >> $LOGFILE
[2963]	2181	LogFile "-----------------------------------"
[2432]	2182
[2092]	2183	echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
	2184	echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
[1902]	2185	if [ _"$MONDO_SHARE" != _"" ]; then
	2186	for q in filelist.full.gz biggielist.txt ; do
	2187	[ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
	2188	cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
	2189	done
	2190	fi
	2191
[3476]	2192	# copy (e)lilo/isolinux/grub/whatever stuff into it as well
[3419]	2193	# to get it on the media (in addition to the boot part
	2194	# and also to support UEFI boot mechanism
[3499]	2195	bootdir=$bigdir/syslinux
[3476]	2196	bootconf="$bootdir/syslinux.cfg"
[3499]	2197	boottype=syslinux
[3419]	2198	mkdir -p $bootdir
[3528]	2199	FindLdlinux32Binary
[3419]	2200	if [ "$BOOT_TYPE" != "BIOS" ]; then
	2201	if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
	2202	LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
	2203	MindiExit -1
	2204	fi
	2205	# EFI or UEFI
[3430]	2206	# TODO: names are hard-coded for now
[3419]	2207	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2208	# UEFI
[3476]	2209	efidir=$bigdir/EFI/BOOT
[3483]	2210	# On RHEL6 grub works
	2211	dname=`pbdistrocheck \| grep -E '^Name:' \| cut -d':' -f2`
	2212	dver=`pbdistrocheck \| grep -E '^Ver:' \| cut -d':' -f2`
	2213	if [ $dname = "rhel" ] && [ $dver = "6" ]; then
[3491]	2214	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
[3555]	2215	bootconf="$efidir/BOOTX64.conf"
[3483]	2216	boottype=grub
	2217	elif [ $dname = "rhel" ] && [ $dver = "7" ]; then
[3491]	2218	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
[3536]	2219	bootconf="$efidir/grub.cfg"
[3483]	2220	boottype=grub2
[3518]	2221	elif [ $dname = "debian" ] && [ $dver = "8" ]; then
	2222	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
	2223	bootconf="$efidir/grub.cfg"
	2224	boottype=grub2
[3491]	2225	else
	2226	# Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
	2227	FindSyslinux64EFI
	2228	bootbin=$SYSLINUX64EFI
	2229	bootconf="$efidir/syslinux.cfg"
[3483]	2230	fi
[3538]	2231
	2232	# Depending on the arch, the target boot file is different
	2233	if [ "$ARCH" = "x86_64" ] ; then
[3555]	2234	tgbin="BOOTX64.efi"
[3538]	2235	elif [ "$ARCH" = "armv8" ]; then
[3555]	2236	tgbin="BOOTAA64.efi"
[3538]	2237	else
	2238	# i?386
[3555]	2239	tgbin="BOOTIA32"
[3538]	2240	fi
[3419]	2241	else
	2242	# EFI
[3476]	2243	efidir=$bootdir
	2244	bootbin=`find /boot/efi -iname "elilo.efi" \| head -1`
[3538]	2245	tgbin=$bootbin
[3476]	2246	boottype=elilo
	2247	bootconf="$efidir/elilo.conf"
[3419]	2248	fi
[3522]	2249	LogAll "INFO: Found $boottype boot type"
[3419]	2250
	2251	# Copy it so that CD-ROM menu entry is satisfied
	2252	mountefi=0
	2253	df -T \| grep /boot/efi \| grep -qE 'vfat'
	2254	if [ $? -ne 0 ]; then
	2255	mount /boot/efi
	2256	if [ $? -ne 0 ]; then
[3522]	2257	echo "ERROR: You have to mount your (U)EFI partition when using mindi"
[3419]	2258	MindiExit -1
	2259	fi
	2260	mountefi=1
	2261	fi
[3476]	2262	mkdir -p $efidir
[3538]	2263	cp $bootbin $efidir/$tgbin
[3419]	2264	if [ $mountefi -eq 1 ]; then
	2265	umount /boot/efi 2>&1 > /dev/null
	2266	fi
[3479]	2267
[3499]	2268	if [ $boottype = "syslinux" ]; then
[3491]	2269	FindLdlinuxe64Binary
	2270	if [ -e "$LDLINUXE64" ]; then
	2271	LogFile "INFO: Copying $LDLINUXE64 to $efidir"
	2272	cp $LDLINUXE64 $efidir 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
[3542]	2273	cp $LDLINUXE64/../libutil.c32 $efidir 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
[3491]	2274	fi
[3479]	2275	fi
[3528]	2276	# In all cases prepare syslinux content for BIOS mode
	2277	# so that we can have multi boot mode media BIOS+UEFI
	2278	if [ -e "$LDLINUXC32" ]; then
	2279	LogFile "INFO: Copying $LDLINUXC32 to $bigdir/EFI"
	2280	cp $LDLINUXC32 "$bigdir/EFI" 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXC32 to $bigtdir/EFI. Did you run out of disk space?"
	2281	fi
	2282	else
[3479]	2283	# Useful for syslinux 5.x
	2284	if [ -e "$LDLINUXC32" ]; then
	2285	LogFile "INFO: Copying $LDLINUXC32 to $bootdir"
[3522]	2286	cp $LDLINUXC32 $bootdir 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXC32 to $bootdir. Did you run out of disk space?"
[3479]	2287	fi
[3419]	2288	fi
[3479]	2289
[3525]	2290	# Here we need to know the ramdisk_size
	2291	size_of_all_tools=`du -sk $bigdir \| cut -f1`
	2292	export ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
	2293	LogFile "INFO: Ramdisk will be $ramdisk_size KB"
	2294
[3476]	2295	MakeBootConfFile $boottype > $bootconf
[3554]	2296	LogFile "Boot Conf file $bootconf content is:"
	2297	LogFile "------------------------------------"
	2298	cat $bootconf >> $LOGFILE
	2299	LogFile "------------------------------------"
[3528]	2300	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2301	# Also generate the syslinux conf
	2302	MakeBootConfFile syslinux > "$bigdir/EFI/syslinux.cfg"
[3554]	2303	LogFile "Boot Conf file $bigdir/EFI/syslinux.cfg content is:"
	2304	LogFile "---------------------------------------------------"
[3557]	2305	cat $bigdir/EFI/syslinux.cfg >> $LOGFILE
[3554]	2306	LogFile "---------------------------------------------------"
[3528]	2307	fi
[3419]	2308
[3522]	2309	echo -en "INFO: Tarring and zipping the data content..."
[3407]	2310	(cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log \| gzip -9 > $MINDI_CACHE/all.tar.gz \|\| LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
[3149]	2311	LogFile "Size of the data content"
	2312	LogFile "------------------------"
[3407]	2313	du -sk $MINDI_CACHE/*gz >> $LOGFILE
[3149]	2314	LogFile "------------------------"
[1902]	2315	echo -e "$DONE"
	2316
[3565]	2317	[ "$bigdir" != "/" ] && rm -rf $bigdir
[747]	2318	rm -f $needlist
	2319	}
	2320
	2321
	2322	Prompt() {
	2323	echo -en "$1"
	2324	read line
	2325	}
	2326
	2327
	2328	ReadLine() {
	2329	local i incoming
	2330	read incoming
	2331	i=0
	2332	while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
[925]	2333	i=$(($i+1))
	2334	read incoming
[747]	2335	done
	2336	echo "$incoming"
	2337	}
	2338
	2339
	2340	SizeOfPartition() {
	2341	local devpath drive res stub
	2342	device=$1
[2917]	2343	if [ "`echo "$device" \| grep -E "^/dev/"`" = "" ] ; then
	2344	Die "Cannot find $device's size - is your /etc/fstab sane?"
	2345	fi
[747]	2346	if [ "`echo "$device" \| grep -F "/dev/md"`" != "" ] ; then
[925]	2347	res=`SizeOfRaidPartition $device`
	2348	[ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
	2349	echo "$res"
	2350	return 0
[747]	2351	fi
[925]	2352	# patch from Bill <bill@iwizard.biz> - 2003/08/25
[960]	2353	res=`$FDISK -s $device 2>> $LOGFILE`
[925]	2354	# end patch
[2448]	2355	# take only the first in case of multiple mount (cifs, nfs, ...)
	2356	[ "$res" = "" ] && res=`df -k -P -x supermount \| tr -s '\t' ' ' \| grep -F "$device " \| cut -d' ' -f2 \| head -1`
[747]	2357	[ "$res" = "" ] && res="-1"
	2358	echo $res
	2359	return 0
	2360	}
	2361
	2362
	2363	SizeOfRaidPartition() {
	2364	local real_dev smallest_size silly tmp
	2365
	2366	silly=999999999
	2367	smallest_size=$silly
	2368
	2369	for real_dev in `GetRaidDevMembers $1` ; do
[925]	2370	tmp=`SizeOfPartition $real_dev`
	2371	[ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
[747]	2372	done
	2373
	2374	if [ "$smallest_size" = "$silly" ] ; then
[925]	2375	echo "-1"
	2376	return 1
[747]	2377	else
[925]	2378	echo "$smallest_size"
	2379	return 0
[747]	2380	fi
	2381	}
	2382
	2383
	2384	StripExecutable()
	2385	{
	2386	local tmpfile
[925]	2387
[940]	2388	tmpfile=$MINDI_TMP/stripped.$$.dat
[747]	2389	[ -d "$1" ] \|\| [ -h "$1" ] && return
[963]	2390	cp -f $1 $tmpfile 2>> $LOGFILE
[747]	2391	strip $tmpfile 2> /dev/null
[3528]	2392	if [ $? -eq 0 ] ; then
[963]	2393	cp -f $tmpfile $1 2>> $LOGFILE
[2963]	2394	LogFile "INFO: Stripped binary $2"
[747]	2395	fi
	2396	rm -f $tmpfile
	2397	}
	2398
[2292]	2399	KernelVer() {
	2400	local fkern_ver fname
[747]	2401
[2292]	2402	fname=$1
	2403	file $fname \| grep -q gzip
[3528]	2404	if [ $? -eq 0 ] ; then
[2292]	2405	# Used by ia64
[3528]	2406	fkern_ver=`gzip -cd $fname \| strings 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
[2292]	2407	else
[3528]	2408	fkern_ver=`strings $fname 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
[2292]	2409	fi
	2410	echo "$fkern_ver"
	2411	}
	2412
	2413
[2880]	2414	# WARNING: This function should just echo the final result !!!
	2415	#
[747]	2416	TryToFindKernelPath() {
[2880]	2417	local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
[925]	2418
[2292]	2419	we_want_version=$KERVERRUN
[747]	2420	possible_kernels=""
	2421	duff_kernels=""
[2880]	2422	output=""
[3368]	2423
[747]	2424	if [ "$ARCH" = "ia64" ] ; then
	2425	root="/boot/efi/efi"
	2426	else
	2427	root="/"
	2428	fi
[2681]	2429	# See if we're booted from a Xen kernel
[2889]	2430	# From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
	2431	if [ -f /proc/xen/capabilities ]; then
[2681]	2432	# It's a Xen kernel
	2433	KERNEL_IS_XEN="yes"
[2963]	2434	LogFile "INFO: It's a Xen kernel..."
[2681]	2435	fi
	2436
[3122]	2437	for fname in `find $root -maxdepth 2 -type f \| grep -Ei 'lin\|kern\|xen' \| grep -Ev '^/proc/\|^/net/\|^/mnt\|^/lib\|^/lib64\|^/bin\|^/sbin\|^/usr\|^/tmp'` ; do
[925]	2438	[ ! -e "$fname" ] && continue
[747]	2439	[ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
[2292]	2440	fkern_ver=`KernelVer $fname`
[747]	2441	[ "$fkern_ver" = "" ] && continue
	2442	[ "`echo "$fkern_ver" \|grep -F "$we_want_version "`" = "" ] && continue
[925]	2443	[ -f "$fname" ] \|\| continue
	2444	[ -h "$fname" ] && continue
	2445	kdate=`uname -v \| $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' \| $AWK '{print $NF;}'`
	2446	file $fname \| grep -q gzip
[3528]	2447	if [ $? -eq 0 ] ; then
[925]	2448	# Used by ia64
	2449	if [ "`gzip -cd $fname \| strings 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[2880]	2450	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
[925]	2451	duff_kernels="$fname $duff_kernels"
	2452	else
[747]	2453	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2454	possible_kernels="$fname $possible_kernels"
[925]	2455	fi
[747]	2456	else
[925]	2457	if [ "`strings $fname 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[2880]	2458	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
[925]	2459	duff_kernels="$fname $duff_kernels"
	2460	else
[747]	2461	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2462	possible_kernels="$fname $possible_kernels"
[925]	2463	fi
[747]	2464	fi
	2465	done
	2466	if [ ! "$possible_kernels" ] && uname -a \| grep Knoppix > /dev/null ; then
[3535]	2467	possible_kernels=`find /boot/vmlinuz-[2-9].* \| tail -n1`
[747]	2468	fi
	2469	if [ ! "$possible_kernels" ] ; then
[3149]	2470	LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
[747]	2471	possible_kernels="$duff_kernels"
	2472	if [ ! "$possible_kernels" ] ; then
[3149]	2473	LogAll "INFO: Sorry, no duff kernels either"
[747]	2474	else
[3149]	2475	LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
	2476	LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
[747]	2477	fi
	2478	fi
[2681]	2479	if [ $KERNEL_IS_XEN = "yes" ]; then
	2480	possible_xenkernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -i "xen" \| sort -u \| tr '\n' ' '`
	2481	noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
	2482	fi
[2829]	2483	possible_kernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -vi "xen" \| sort -u \| tr '\n' ' '`
	2484	noof_kernels=`CountItemsIn "$possible_kernels"`
[747]	2485	if [ "$noof_kernels" -eq "0" ] ; then
[3149]	2486	LogAll "Could not find your kernel."
[925]	2487	if [ -e "/boot/vmlinuz" ] ; then
[3149]	2488	LogAll "INFO: Using /boot/vmlinuz as a last resort."
[925]	2489	output=/boot/vmlinuz
[747]	2490	else
[925]	2491	output=""
	2492	fi
[747]	2493	elif [ "$noof_kernels" -eq "1" ] ; then
[2880]	2494	kp=`echo "$possible_kernels" \| sed s/' '//`
[2963]	2495	LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
[2880]	2496	output="$kp"
[747]	2497	else
	2498	for i in $possible_kernels ; do
[2880]	2499	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
[3149]	2500	LogAll "INFO: OK, I used my initiative and found that "
	2501	LogAll "INFO: $i is probably your kernel. "
[925]	2502	output="$i"
[2858]	2503	break
[925]	2504	fi
[747]	2505	done
[2858]	2506	if [ ! -n "$output" ]; then
[2880]	2507	if [ "`echo " $possible_kernels " \| grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
[2681]	2508	output=/boot/vmlinuz
[2963]	2509	LogFile "INFO: Schlomo, this one's for you."
[2681]	2510	else
[2963]	2511	LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
	2512	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
	2513	LogFile "INFO: $possible_kernels"
[2880]	2514	output=""
[2681]	2515	fi
	2516	fi
	2517	fi
	2518	if [ $KERNEL_IS_XEN = "yes" ]; then
	2519	if [ "$noof_xenkernels" -eq "0" ]; then
	2520	xenkernelpath=""
	2521	elif [ "$noof_xenkernels" -eq "1" ]; then
	2522	xenkernelpath=`echo "$possible_xenkernels" \| sed s/' '//`
[2963]	2523	LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
[925]	2524	else
[2681]	2525	for i in $possible_xenkernels ; do
[2880]	2526	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
[2963]	2527	LogFile "INFO: OK, I used my initiative and found that "
	2528	LogFile "INFO: $i is probably your Xen kernel. "
[2681]	2529	xenkernelpath="$i"
[2858]	2530	break
[2681]	2531	fi
	2532	done
[2858]	2533	if [ ! -n "$xenkernelpath" ]; then
[2681]	2534	new_possible_xenkernels=`echo "$possible_xenkernels" \| tr -s ' ' '\n' \| grep -E "^/boot" \| sort -u \| tr '\n' ' '`
	2535	if [ ! -n "$new_possible_xenkernels" ]; then
	2536	xenkernelpath=`echo $new_possible_xenkernels \| tr -s ' ' '\n' \| head -1`
[2963]	2537	LogFile "INFO: Using $xenkernelpath"
[2681]	2538	else
[2963]	2539	LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
	2540	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
	2541	LogFile "INFO: $possible_xenkernels"
[2880]	2542	output=""
[2681]	2543	xenkernelpath=`echo $possible_xenkernels \| tr -s ' ' '\n' \| head -1`
[2963]	2544	LogFile "INFO: Using $xenkernelpath"
[2681]	2545	fi
	2546	fi
[925]	2547	fi
[2681]	2548	if [[ -z "$xenkernelpath" \|\| ! -f "$xenkernelpath" ]]; then
	2549	Die "Cannot find Xen kernel $xenkernelpath, aborting"
	2550	fi
[747]	2551	fi
[3357]	2552	#LogAll "TryToFindKernelPath found $output"
[2681]	2553	echo "$output"
[747]	2554	}
	2555
	2556
[3522]	2557	MakeBootInitFile() {
	2558	local tgz_dir_fname rdz_fname tempfile nodes kernelsize res currsize not_copied j k s w needed_modules_path d thelink templog
[925]	2559
[747]	2560	tgz_dir_fname=$1
	2561	rdz_fname=$2
[1983]	2562	kernelsize=$3
[940]	2563	tempfile=$MINDI_TMP/temp.rd
[3403]	2564	res=0
	2565	templog=$MINDI_TMP/$$.log
	2566	> $templog
	2567
[3522]	2568	LogAll "INFO: Making Boot RAM Disk ($ramdisk_size KB)"
	2569	dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null \|\| Die "Not enough room for temporary ramdisk (MakeBootInitFile)"
	2570	LogAll "INFO: Creating ext2 filesystem on $tempfile"
[1764]	2571	mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE \|\| Die "Unable to create an ext2 file system on $tempfile"
[747]	2572	mkdir -p $mountpoint
	2573	mount -t ext2 -o loop $tempfile $mountpoint \|\| Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
[2034]	2574
[3248]	2575	# Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
	2576	for d in bin sbin lib lib64; do
	2577	if [ -h "/$d" ]; then
	2578	thelink=`readlink /$d`
[3565]	2579	mkdir -p $mountpoint/$thelink \|\| LogAll "ERROR: Unable to create $thelink in $mountpoint."
[3248]	2580	mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
	2581	if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
	2582	rmdir $mountpoint/$d
	2583	fi
	2584	if [ ! -h $mountpoint/$d ]; then
	2585	rm -f $mountpoint/$d 2> /dev/null
[3565]	2586	(cd $mountpoint ; ln -s $thelink $d) \|\| LogAll "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
[3248]	2587	fi
	2588	fi
	2589	done
[3357]	2590
[3248]	2591	LogFile "INFO: what is now in $mountpoint"
[3522]	2592	ls -al $mountpoint >> $LOGFILE
[3172]	2593
[2963]	2594	# Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
[3357]	2595	# copy from rootfs into mountpoint
[3522]	2596	LogAll "INFO: Copying Mindi files onto $mountpoint"
[2963]	2597	for f in $tgz_dir_fname/*; do
	2598	if [ ! -r $f ]; then
	2599	Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
	2600	else
[3522]	2601	cp -af $f $mountpoint 2>&1 >> $LOGFILE
[2963]	2602	fi
	2603	done
[3522]	2604	(cd $mountpoint/etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
	2605	(cd $mountpoint ; ln -sf usr/sbin/init linuxrc)
[1914]	2606
[3522]	2607	(cd $mountpoint/dev ; tar -zxf dev-entries.tgz \|\| Die "Cannot untar dev-entries.tgz" ; rm -f dev-entries.tgz)
[747]	2608
	2609	for w in insmod.static insmod.static.old ; do
[925]	2610	s=`which $w 2> /dev/null`
	2611	if [ -e "$s" ] ; then
[3522]	2612	tar cf - -C / $s 2> /dev/null \| (cd $mountpoint ; tar xf -)
[925]	2613	fi
[747]	2614	done
	2615
	2616	[ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
[2951]	2617
[2438]	2618	# Copy of files mandatory for ssh to automate mount if sshfs is used
[3358]	2619	mkdir -p $mountpoint/.ssh $mountpoint/tmp
[3204]	2620	cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
[3241]	2621	cat > $mountpoint/tmp/myssh << EOF
[2438]	2622	ssh -o StrictHostKeyChecking=no $*
	2623	EOF
	2624	chmod 755 $mountpoint/tmp/myssh
	2625
[2039]	2626	# Copy of files mandatory for ld.so
[3204]	2627	cp -a /etc/ld.so.c* $mountpoint/etc
[2039]	2628
[2951]	2629	# Handle the case where busybox and mount are dynamically linked
[3231]	2630	file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 \| grep -q "dynamically"
[2951]	2631	if [ $? -eq 0 ]; then
	2632	# We want to use the real mount and all the supported variants (nfs, cifs, ...)
[3565]	2633	rm -f $mountpoint/bin/mount
[2951]	2634	fi
	2635
[3522]	2636	# Copy of files from the minimal env needed as per the deplist.d/minimal.conf (which includes all busybox deps)
	2637	echo -en "INFO: Gathering dependencies of required files..."
[3081]	2638	rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
[3522]	2639	lines=`cat $DEPLIST_DIR/minimal.conf \| grep -vE " #.\|^#" \| sort -u`
	2640	noof_lines=`echo $lines \| wc -w`
	2641	progress=0
	2642	for f in $lines; do
[3277]	2643	if [ -d $f ]; then
	2644	for g in `find $f`; do
	2645	echo $g >> $MINDI_TMP/minimal.lis
	2646	LocateDeps $g >> $MINDI_TMP/minimal2.lis
	2647	done
	2648	else
	2649	if [ -r $f ]; then
	2650	echo $f >> $MINDI_TMP/minimal.lis
	2651	LocateDeps $f >> $MINDI_TMP/minimal2.lis
	2652	fi
[3081]	2653	fi
[3522]	2654	progress=$(($progress+1))
	2655	LogProgress $progress $noof_lines
[2951]	2656	done
[3522]	2657	echo -e "$DONE"
	2658	echo -en "INFO: Processing all dependencies links..."
	2659	lines=`sort -u $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis`
	2660	noof_lines=`echo $lines \| tr ' ' '\n' \| wc -l`
	2661	progress=0
	2662	for f in $lines; do
[3231]	2663	mr-read-all-link $f >> $MINDI_TMP/minimal.lis
[3522]	2664	progress=$(($progress+1))
	2665	LogProgress $progress $noof_lines
[2951]	2666	done
[3522]	2667	echo -e "$DONE"
[2951]	2668	# Initial / are trucated by tar
[3014]	2669	finallist=""
[3204]	2670	# Remove directories from the list, as tar/cp will create them anyway
[3014]	2671	# and it may hurt if /lib is in it as on Debian/Ubuntu
[3166]	2672	# recent bash says that -d is true for a link to a dir !
[3014]	2673	for f in `sort -u $MINDI_TMP/minimal.lis`; do
[3479]	2674	if [ -e "$f" -a ! -d "$f" ] \|\| [ -h $f ]; then
[3357]	2675	# Do not overwrite files already in destination (avoid using option -n of cp not portable)
	2676	if [ ! -e "$mountpoint/$f" ]; then
	2677	finallist="$finallist $f"
	2678	fi
[3014]	2679	fi
	2680	done
[3357]	2681	rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
	2682
[3522]	2683	fnllist=`echo $finallist \| tr ' ' '\n' \| sort -u \| tr '\n' ' '`
	2684	LogFile "INFO: Copy the minimal env with cp -a --parents $fnllist -t $mountpoint"
[3565]	2685	cp -a --parents $fnllist -t $mountpoint 2> $templog \|\| LogAll "WARNING: Problem in minimal analysis" $templog
[3000]	2686
[3357]	2687	# In case target /bin dir still doesn't exist, create it before using it
	2688	if [ ! -d $mountpoint/bin ]; then
	2689	mkdir -p $mountpoint/bin
	2690	fi
	2691
	2692	# For older distributions expecting /sbin/init provides it
[3525]	2693	if [ ! -e "$mountpoint/sbin/init" ]; then
[3522]	2694	(cd $mountpoint/sbin ; ln -sf ../usr/sbin/init .)
[3357]	2695	fi
	2696
[3000]	2697	# To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
[3522]	2698	(cd $mountpoint ; ln -sf /bin/bash bin/sh)
[3405]	2699	LogFile "INFO: Using bash as default shell"
[2951]	2700
	2701	# Avoids an issue on some distro (RHEL5)
[2164]	2702	rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
	2703
[1724]	2704	# Management of udev (which includes modprobe in rules)
[1759]	2705	ps auxww \| grep -v grep \| grep -qw udevd
[1716]	2706	if [ $? -eq 0 ]; then
[1914]	2707	echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
[3405]	2708	LogFile "INFO: udev device manager found"
[3565]	2709	tar cf - -C / /etc/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /etc/udev analysis" $templog
[3204]	2710	# This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
[3565]	2711	rm -f $mountpoint/etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
[2894]	2712	# Do not do it if it's a link (Ubuntu 64 bits #503)
[3197]	2713	if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
[3565]	2714	tar cf - -C / /lib64/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /lib64/udev analysis" $templog
[2894]	2715	fi
[2895]	2716	if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [ ! -h "/lib32/udev" ]; then
[3565]	2717	tar cf - -C / /lib32/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /lib32/udev analysis" $templog
[2895]	2718	fi
	2719	if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [ ! -h "/lib/udev" ]; then
[3565]	2720	tar cf - -C / /lib/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /lib/udev analysis" $templog
[2895]	2721	fi
[3261]	2722	if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [ ! -h "/usr/lib/udev" ]; then
[3565]	2723	tar cf - -C / /usr/lib/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /usr/lib/udev analysis" $templog
[3261]	2724	fi
[3489]	2725	if [ -x /sbin/udevd ] \|\| [ -x /usr/bin/udevd ] \|\| [ -x /usr/lib/systemd/systemd-udevd ] \|\| [ -x /lib/systemd/systemd-udevd ]; then
[2964]	2726	lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
[1781]	2727	lis=""
	2728	# Get only the files which exist in that list
[1815]	2729	# and potentially their symlink structure
[1781]	2730	for i in $lis2; do
[1815]	2731	if [ -h $i ]; then
	2732	j=$i
	2733	while [ -h $j ]; do
	2734	lis="$lis $j"
[3204]	2735	j=`readlink -f $j`
[1815]	2736	done
	2737	lis="$lis $j"
[3525]	2738	elif [ -d $i ]; then
	2739	lis3="$lis3 $i"
[1815]	2740	elif [ -f $i ]; then
[1781]	2741	lis="$lis $i"
	2742	fi
	2743	done
	2744	# And their deps
[1759]	2745	LocateDeps $lis > $MINDI_TMP/udev.lis
	2746	for i in $lis; do
	2747	if [ "`echo $i \| cut -c1`" = "/" ]; then
	2748	j=`echo $i \| cut -c2-`
[3565]	2749	[ "$j" != "" ] && rm -f $mountpoint/$j
[1759]	2750	fi
[3204]	2751	echo "$i" >> $MINDI_TMP/udev.lis
[1759]	2752	done
[3257]	2753	finallist=""
	2754	# Remove directories from the list, as tar/cp will create them anyway
	2755	# and it may hurt if /lib is in it as on Debian/Ubuntu
	2756	# recent bash says that -d is true for a link to a dir !
	2757	for f in `sort -u $MINDI_TMP/udev.lis`; do
[3479]	2758	if [ -e "$f" -a ! -d "$f" ] \|\| [ -h "$f" ]; then
[3357]	2759	# Do not overwrite files already in destination (avoid using option -n of cp not portable)
	2760	if [ ! -e "$mountpoint/$f" ]; then
	2761	finallist="$finallist $f"
	2762	fi
[3257]	2763	fi
	2764	done
[3525]	2765	# But adds the directory useful for udev in $lis3
[3522]	2766	fnllist=`echo $finallist \| tr ' ' '\n' \| sort -u \| tr '\n' ' '`
	2767	LogFile "INFO: Copying udev related files with cp -a --parents $fnllist -t $mountpoint/"
[3565]	2768	cp -a --parents $fnllist $lis3 -t $mountpoint/ 2> $templog \|\| LogAll "WARNING: Problem in udev.lis analysis" $templog
[1721]	2769	rm -f $MINDI_TMP/udev.lis
[1720]	2770	else
[2965]	2771	LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
[2963]	2772	LogAll " mindi will use static devices which may cause problems"
[1914]	2773	rm -f $mountpoint/tmp/USE-UDEV
[1720]	2774	fi
[1716]	2775	fi
[1786]	2776
[2882]	2777	# Management of potential HW info (ProLiant only at the moment)
[1880]	2778	rm -rf $MINDI_CACHE/bkphw
	2779	mindi-bkphw $MINDI_CACHE $MINDI_CONF \| tee -a $LOGFILE
	2780	if [ -d $MINDI_CACHE/bkphw ]; then
[3565]	2781	LogAll "INFO: Hardware Information found and saved ..."
[3522]	2782	cp -rp $MINDI_CACHE/bkphw $mountpoint
[1880]	2783	if [ -f $MINDI_CACHE/tools.files ]; then
	2784	lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
[1863]	2785	LocateDeps $lis > $MINDI_TMP/tools.lis
[3565]	2786	tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in tools.lis analysis" $templog
[1863]	2787	fi
[1880]	2788	if [ -f $MINDI_CACHE/mindi-rsthw ]; then
[3522]	2789	mv -f $MINDI_CACHE/mindi-rsthw $mountpoint
	2790	chmod 755 $mountpoint/mindi-rsthw
[1761]	2791	fi
[1880]	2792	rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
[1761]	2793	fi
	2794
[2183]	2795	# Management of perl scripts delivered needed at restore time
[3522]	2796	LogAll "INFO: Analyzing perl modules dependencies..."
[3565]	2797	mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]bin/mr- 2> $templog > $MINDI_TMP/perl.lis \|\| LogAll "ERROR: Problem in mindi-get-perl-modules" $templog
[3405]	2798	LogFile "DBG4: Perl Modules found:"
	2799	LogFile "-------------------------"
[3403]	2800	cat $MINDI_TMP/perl.lis >> $LOGFILE
[3405]	2801	LogFile "-------------------------"
[3565]	2802	tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in perl scripts analysis" $templog
[2183]	2803
[1885]	2804	for w in cdrom groovy-stuff ; do
[747]	2805	mkdir -p mnt/$w
	2806	done
	2807
[3565]	2808	tar cf - -C / /dev/fd0[1,2][4,7,8] 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in fd dev analysis" $templog
[1721]	2809
[1885]	2810	needed_modules=""
[1993]	2811	list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
[1885]	2812
[3270]	2813	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[747]	2814	# For PXE boot
	2815	list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
	2816	fi
[1727]	2817	for i in $DENY_MODS; do
[2963]	2818	LogFile "INFO: Removing $i from the list of modules to load"
[1727]	2819	list_of_groovy_mods=`echo ${list_of_groovy_mods} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
	2820	done
	2821
[3253]	2822	if [ "${kernelname}" != "" ]; then
	2823	needed_modules_path=lib/modules/${kernelname}
[3257]	2824	mkgmopt="-k ${kernelname}"
[3253]	2825	else
	2826	needed_modules_path=lib/modules/$KERVERRUN
	2827	mkgmopt="-k $KERVERRUN"
	2828	fi
[1914]	2829
[3565]	2830	[ -e "/$needed_modules_path" ] \|\| LogAll "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then mindi won't probably work."
[3522]	2831	LogAll "INFO: Analyzing kernel modules dependencies..."
[3253]	2832	needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
	2833
[3257]	2834	LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
[3565]	2835	cp --parents -aL $needed_modules $mountpoint/ 2> $templog \|\| LogAll "ERROR: Unable to copy modules to $mountpoint" $templog
[3253]	2836
	2837	# Uncompress modules if not using udev and native modprobe
	2838	if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
	2839	for i in $needed_modules; do
	2840	if [ "`echo "$i" \| grep -E ".gz$"`" ]; then
[1727]	2841	gunzip -f $mountpoint/$i
[1815]	2842	fi
[3253]	2843	if [ "`echo "$i" \| grep -E ".bz$"`" ]; then
	2844	bunzip2 -f $mountpoint/$i
	2845	fi
	2846	if [ "`echo "$i" \| grep -E ".xz$"`" ]; then
	2847	unxz -f $mountpoint/$i
	2848	fi
	2849	LogFile "INFO: Uncompressing $i"
	2850	done
	2851	fi
[1815]	2852
[2964]	2853	# Also copy modules.* in case of udev so that normal modprobe works
[3565]	2854	tar cf - -C / /$needed_modules_path/modules.* 2> $templog \| (cd "$mountpoint" ; tar xf -) \|\| LogAll "ERROR: Unable to copy modules.* to $mountpoint" $templog
[1815]	2855
[2680]	2856	# Copy FW in case some drivers needs it
[3163]	2857	for d in "/lib" "/usr/lib"; do
[3201]	2858	if [ -d "$d/firmware" -a ! -h $d ]; then
[3166]	2859	cp -a "$d/firmware" "$mountpoint/$d"
[3163]	2860	fi
	2861	done
[2680]	2862
[3163]	2863	# Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
	2864	for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
[3201]	2865	if [ -d "$d/multipath" -a ! -h $d ]; then
[3166]	2866	cp -a "$d/multipath" "$mountpoint/$d"
[3163]	2867	fi
	2868	done
	2869
[3326]	2870	# Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
[3479]	2871	(cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e "$mountpoint/bin/$i" ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done)
[3324]	2872
[2913]	2873	# Copy an additional ProLiant tool for OBDR support
	2874	if [ -f $MINDI_TMP/OBDR ]; then
[3117]	2875	found=0
[2913]	2876	if [ -x /usr/bin/hpsa_obdr_mode ]; then
	2877	mkdir -p $mountpoint/usr/bin
	2878	cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
[3565]	2879	LogAll "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
[3117]	2880	found=1
	2881	fi
	2882	if [ -x /usr/bin/sg_wr_mode ]; then
	2883	mkdir -p $mountpoint/usr/bin
[3135]	2884	lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
[3118]	2885	LocateDeps $lis > $MINDI_TMP/obdr.lis
[3565]	2886	tar cf - $lis -C / `sort -u $MINDI_TMP/obdr.lis` 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in obdr.lis analysis" $templog
	2887	LogAll "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
[3117]	2888	found=1
	2889	fi
	2890	if [ $found -eq 0 ]; then
	2891	LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
[2913]	2892	LogAll " This may lead to a tape not going back to sequential mode after OBDR boot"
	2893	fi
	2894	fi
	2895
[3499]	2896	if [ ! -e "/sbin/devfsd" ]; then
[2963]	2897	LogFile "INFO: Deleting devfsd daemon from ramdisk"
[2995]	2898	[ ! -e "/sbin/devfsd" ] && LogFile " ...because /sbin/devfsd not found"
[747]	2899	rm -f $mountpoint/sbin/devfsd
	2900	fi
	2901	[ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
[1885]	2902	if [ _"$MONDO_SHARE" != _"" ]; then
[3278]	2903	MakeMondoConfigFile $mountpoint/tmp/$MRCFG
	2904	cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE \|\| Die "Cannot copy $MRCFG to ramdisk"
[2092]	2905	cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE \|\| Die "Cannot copy mountlist to ramdisk"
[747]	2906	echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
	2907	echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
	2908	fi
[3310]	2909
	2910	# Create module list to load at restore time
	2911	rm -f $mountpoint/tmp/modules
	2912	for m in $CDROM_MODS; do
	2913	echo $m >> $mountpoint/tmp/modules
	2914	done
	2915
[747]	2916	mkdir -p $mountpoint/proc
[2963]	2917	LogFile "---------------------------"
[3372]	2918	LogFile "Size of initial ramdisk:"
	2919	LogFile "---------------------------"
	2920	(cd "$mountpoint" ; du -sh .) >> $LOGFILE
	2921	LogFile "---------------------------"
[2963]	2922	LogFile "Content of initial ramdisk:"
	2923	LogFile "---------------------------"
[2712]	2924	(cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
[2963]	2925	LogFile "---------------------------"
[2438]	2926
[1230]	2927	# Determine what filesystem to use for initrd image
[2963]	2928	LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
[1230]	2929	gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
	2930	[ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
[3008]	2931	if [ "$gvFileSystem" = "ext2fs" ] \|\| [ "$gvFileSystem" = "ext3fs" ] \|\| [ "$gvFileSystem" = "ext4fs" ]; then
[1230]	2932	# say what will be used
[2963]	2933	LogFile "INFO: Creating an $gvFileSystem initrd image..."
[1230]	2934	# kernel expects linuxrc in ext2 filesystem
[3522]	2935	(cd "$mountpoint" && ln -sf usr/sbin/init linuxrc)
[1230]	2936	# unmount loop filesystem and create image file using the standard approach
[3546]	2937	sync
[1230]	2938	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
[3522]	2939	dd if=$tempfile bs=1k of=${rdz_fname}.tmp > /dev/null 2> /dev/null
[3008]	2940	if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
	2941	bs=`/sbin/tune4fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
	2942	else
	2943	bs=`tune2fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
	2944	fi
[2564]	2945	MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
[1799]	2946	gzip -c9 ${rdz_fname}.tmp > $rdz_fname
[1764]	2947	rm -f ${rdz_fname}.tmp
[1230]	2948	# log that we are done
[2390]	2949	elif [ "$gvFileSystem" = "initramfs" ]; then
[1230]	2950	# say what will be used
[2963]	2951	LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
[1230]	2952	# make sure that cpio is there
	2953	which cpio &> /dev/null; [ $? -eq 0 ] \|\| Die "cpio not found. Please install package cpio and try again."
	2954	# kernel expects init in cpio filesystem
[3522]	2955	(cd "$mountpoint" ; ln -sf usr/sbin/init init)
[1230]	2956	# create cpio image file and unmount loop filesystem
[3524]	2957	(cd "$mountpoint" ; find . -print \| cpio -o -H newc 2> /dev/null \| gzip -9 > $rdz_fname)
[3546]	2958	sync
[1230]	2959	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
	2960	# log that we are done
[2390]	2961	else
[1230]	2962	Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
[2390]	2963	fi
	2964
[747]	2965	if [ "$res" -eq "0" ] ; then
[3525]	2966	LogAll "INFO: MakeBootInitFile finished without error."
[747]	2967	else
[3525]	2968	LogAll "WARNING: MakeBootInitFile exits WITH ERRORS."
[747]	2969	fi
	2970	return 0
	2971	}
	2972
	2973
	2974	##############################################################################
[1021]	2975	#----------------------------------- Main -----------------------------------#
[747]	2976	##############################################################################
	2977
[1885]	2978	# Now we can create what we need
	2979	mkdir -p $MINDI_TMP
[747]	2980
[2995]	2981	# --nolog needs to be first, and is used in analyze-my-lvm
	2982	if [ "$1" = "--nolog" ] ; then
	2983	shift
	2984	LOGFILE=/dev/stderr
	2985	else
	2986	> $LOGFILE
	2987	fi
[1885]	2988	if [ "$1" = "--printvar" ] ; then
	2989	shift
	2990	if [ _"$1" != _"" ] ; then
	2991	set \| grep -Ew "^$1" \| cut -d= -f2
	2992	fi
[2183]	2993	exit 0
[1885]	2994	fi
	2995
[2963]	2996	LogFile "mindi v$MINDI_VERSION"
[3513]	2997	LogFile "-----------------------------"
	2998	LogFile "Start date : `date`"
	2999	LogFile "-----------------------------"
[2963]	3000	LogFile "$ARCH architecture detected"
	3001	LogFile "mindi called with the following arguments:"
[2978]	3002	echo "$@">> $LOGFILE
[2963]	3003	LogFile "-----------------------------"
[3513]	3004	LogFile "pbdistrocheck results:"
	3005	pbdistrocheck >> $LOGFILE
	3006	LogFile "-----------------------------"
[747]	3007
[1010]	3008	# Log some capital variables
	3009	[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
[3149]	3010	[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
[2963]	3011	LogFile "MONDO_SHARE = $MONDO_SHARE"
	3012	LogFile "MINDI_LIB = $MINDI_LIB"
	3013	LogFile "MINDI_SBIN = $MINDI_SBIN"
	3014	LogFile "MINDI_CONF = $MINDI_CONF"
[3388]	3015	# Purge from potential old run
	3016	if [ _"$MINDI_CACHE" = _"" ]; then
	3017	Die "MINDI_CACHE undefined"
	3018	else
	3019	LogFile "MINDI_CACHE = $MINDI_CACHE"
	3020	fi
	3021
[1885]	3022	if [ -f $MINDI_CONFIG ]; then
[2963]	3023	LogFile "-----------------------------"
	3024	LogFile " Mindi configuration file "
	3025	LogFile "-----------------------------"
[1885]	3026	grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
[2963]	3027	LogFile "-----------------------------"
[1885]	3028	fi
[2995]	3029	LogFile "In Mindi"
	3030	LogFile "--------"
	3031	LogFile "EXTRA_SPACE = $EXTRA_SPACE"
	3032	LogFile "--------"
[1010]	3033
[747]	3034	trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
[1010]	3035
	3036	# Sanity checks
	3037	which which > /dev/null 2> /dev/null \|\| Die "Please install 'which'."
	3038	which strings > /dev/null 2> /dev/null \|\| Die "Please install binutils and libbinutils; you have no 'strings' executable."
	3039	which gawk > /dev/null 2> /dev/null \|\| Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
	3040	which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` \|\| AWK="`which awk 2>/dev/null`"
	3041	if which awk &> /dev/null ; then
	3042	if ! which gawk &> /dev/null ; then
[3565]	3043	LogAll "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
[1010]	3044	fi
	3045	fi
	3046	which mke2fs > /dev/null 2> /dev/null \|\| Die "Please put mke2fs in system path"
[2222]	3047	[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
[1010]	3048
[3005]	3049	[ "`echo $KERVERRUN \| grep -E "2\.4\.[0-6]" \| grep -vE "2\.4\.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
[1010]	3050
	3051	# Update the PATH variable if incomplete
	3052	if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
	3053	PATH=$PATH:/sbin:/usr/sbin
	3054	export PATH
[2963]	3055	LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
	3056	LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
[3255]	3057	LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
[1010]	3058	fi
	3059
[1737]	3060	if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
[3368]	3061	Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
[1010]	3062	fi
	3063
[3149]	3064	### TODO
[747]	3065	### Fix as it's not mandatory on ia64
	3066	if [ "$ARCH" = "ia64" ] ; then
[1010]	3067	if which elilo &> /dev/null ; then
	3068	LILO_EXE=elilo
	3069	else
[2024]	3070	LILO_EXE=`which false 2> /dev/null`
[1010]	3071	fi
[747]	3072	else
	3073	FindIsolinuxBinary
	3074	fi
	3075	trap "Aborted" SIGTERM
	3076	DONE="\r\t\t\t\t\t\t\t\tDone. "
	3077	kernelpath=""
[1010]	3078	MONDO_ROOT=/var/cache/mondo
[747]	3079	mkdir -p $MONDO_ROOT
	3080
	3081	if [ -d "/proc/lvm" ]; then
	3082	# LVM v1
	3083	LVMCMD=""
	3084	LVM="v1"
	3085	elif [ -d "/dev/mapper" ]; then
	3086	# LVM v2
	3087	LVMCMD="lvm"
	3088	LVM="v2"
	3089	else
	3090	LVM="false"
	3091	fi
[3149]	3092
	3093	if [ -e "/proc/cmdline" ]; then
	3094	CMDLINE="/proc/cmdline"
	3095	elif [ -e "/tmp/cmdline" ]; then
	3096	CMDLINE="/tmp/cmdline"
	3097	else
	3098	CMDLINE="/dev/null"
	3099	fi
	3100
[2963]	3101	LogFile "INFO: LVM set to $LVM"
	3102	LogFile "----------"
	3103	LogFile "mount result:"
	3104	LogFile "-------------"
[1230]	3105	mount >> $LOGFILE
[3479]	3106	if [ -e "/etc/raidtab" ]; then
[2963]	3107	LogFile "-------------"
	3108	LogFile "/etc/raidtab content:"
	3109	LogFile "-------------"
[1315]	3110	cat /etc/raidtab >> $LOGFILE
[3077]	3111	else
[3073]	3112	LogFile "No file /etc/raidtab"
[1315]	3113	fi
[3479]	3114	if [ -e "/etc/mdadm.conf" ]; then
[2981]	3115	LogFile "-------------"
	3116	LogFile "/etc/mdadm.conf content:"
	3117	LogFile "-------------"
	3118	cat /etc/mdadm.conf >> $LOGFILE
[3077]	3119	else
[3149]	3120	LogFile "-------------"
[3073]	3121	LogFile "No file /etc/mdadm.conf"
[2981]	3122	fi
[2963]	3123	LogFile "-------------"
[3149]	3124	LogFile "cat $CMDLINE"
[2963]	3125	LogFile "-------------"
[3149]	3126	cat $CMDLINE >> $LOGFILE
[2963]	3127	LogFile "-------------"
	3128	LogFile "cat /proc/swaps:"
	3129	LogFile "-------------"
[2014]	3130	cat /proc/swaps >> $LOGFILE
[2963]	3131	LogFile "-------------"
[3479]	3132	if [ -e "/proc/mdstat" ]; then
[3073]	3133	LogFile "cat /proc/mdstat:"
	3134	LogFile "-------------"
	3135	cat /proc/mdstat >> $LOGFILE
[3077]	3136	else
[3073]	3137	LogFile "No pseudo file /proc/mdstat"
	3138	fi
[2981]	3139	LogFile "-------------"
[2963]	3140	LogFile "cat /proc/partitions:"
	3141	LogFile "-------------"
[2015]	3142	cat /proc/partitions >> $LOGFILE
[2963]	3143	LogFile "-------------"
	3144	LogFile "cat /proc/filesystems:"
	3145	LogFile "-------------"
[2015]	3146	cat /proc/filesystems >> $LOGFILE
[2963]	3147	LogFile "-------------"
	3148	LogFile "lsmod result:"
	3149	LogFile "-------------"
[1021]	3150	lsmod >> $LOGFILE
[2431]	3151	MODULES="`cat /proc/modules \| $AWK '{print $1}'`"
[1531]	3152	if [ -x /usr/sbin/esxcfg-module ]; then
[2963]	3153	LogFile "-------------"
	3154	LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
	3155	LogFile "-------------"
	3156	LogFile "VMWare modules"
	3157	LogFile "-------------"
[1531]	3158	/usr/sbin/esxcfg-module -l >> $LOGFILE
[2431]	3159	MODULES="$MODULES `/usr/sbin/esxcfg-module -l \| $AWK '{print $1}'`"
[1497]	3160	fi
[3149]	3161	LogFile "-------------"
[2963]	3162	LogFile "FORCE_MODS:"
	3163	LogFile "-------------"
[3065]	3164	LogFile "$FORCE_MODS"
[2963]	3165	LogFile "-------------"
	3166	LogFile "DENY_MODS:"
	3167	LogFile "-------------"
[3065]	3168	LogFile "$DENY_MODS"
[2963]	3169	LogFile "-------------"
	3170	LogFile "df result:"
	3171	LogFile "----------"
[3117]	3172	df -aT >> $LOGFILE
[2963]	3173	LogFile "-------------"
[3117]	3174	LogFile "df -i result:"
	3175	LogFile "----------"
	3176	df -i >> $LOGFILE
	3177	LogFile "-------------"
	3178	if [ -r /boot/grub/menu.lst ]; then
	3179	LogFile "-------------"
	3180	LogFile "INFO: /boot/grub/menu.lst content"
	3181	LogFile "-------------"
	3182	cat /boot/grub/menu.lst >> $LOGFILE
[3123]	3183	LogFile "-------------"
[3117]	3184	fi
[3123]	3185	if [ -r /boot/grub/grub.conf ]; then
[3117]	3186	LogFile "-------------"
[3123]	3187	LogFile "INFO: /boot/grub/grub.conf content"
	3188	LogFile "-------------"
	3189	cat /boot/grub/grub.conf >> $LOGFILE
	3190	LogFile "-------------"
	3191	fi
	3192	if [ -r /boot/grub/grub.cfg ]; then
	3193	LogFile "-------------"
	3194	LogFile "INFO: /boot/grub/grub.cfg content"
	3195	LogFile "-------------"
	3196	cat /boot/grub/grub.cfg >> $LOGFILE
	3197	LogFile "-------------"
	3198	fi
	3199	if [ -r /boot/grub/device.map ]; then
	3200	LogFile "-------------"
[3117]	3201	LogFile "INFO: /boot/grub/device.map content"
	3202	LogFile "-------------"
[3123]	3203	cat /boot/grub/device.map >> $LOGFILE
	3204	LogFile "-------------"
[3117]	3205	fi
	3206	if [ -r /etc/lilo.conf ]; then
	3207	LogFile "-------------"
	3208	LogFile "INFO: /etc/lilo.conf content"
	3209	LogFile "-------------"
	3210	cat /etc/lilo.conf >> $LOGFILE
	3211	fi
[3378]	3212	if [ -d /boot/efi ]; then
[3425]	3213	gcf=`find /boot/efi -name 'grub.c*'`
[3384]	3214	if [ _"$gcf" = _"" ]; then
[3425]	3215	LogFile "Found a /boot/efi directory without a grub config file in it"
[3384]	3216	else
	3217	LogFile "-------------"
	3218	LogFile "INFO: $gcf content"
	3219	LogFile "-------------"
	3220	cat $gcf >> $LOGFILE
	3221	LogFile "-------------"
	3222	fi
[3378]	3223	fi
	3224
[3146]	3225	LogFile "Full fdisk info"
	3226	LogFile "---------------"
	3227	$FDISK -l >> $LOGFILE
	3228	LogFile "----------------"
[747]	3229
[1723]	3230	# Compute libata version
[2649]	3231	laver=`modinfo libata 2> /dev/null \| grep -Ei '^Version:' \| cut -d: -f2 \| cut -d. -f1 \| sed 's/ *//g' 2> /dev/null`
[1723]	3232	# If libata v2 is used then remove ide-generic as it will perturbate boot
[1726]	3233	if [ "`echo $MODULES \| grep libata`" ]; then
[1727]	3234	if [ "$laver" = "2" ]; then
[1726]	3235	DENY_MODS="$DENY_MODS ide-generic"
[2963]	3236	LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
	3237	LogFile "-------------"
[1726]	3238	fi
[1723]	3239	fi
	3240
[2963]	3241	# Check for McAfee which disturbs the access to some files (tgz in articular)
[2976]	3242	if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
[2963]	3243	LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
	3244	LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
	3245	LogFile "WARNING: You have two options:"
	3246	LogFile "WARNING: - Exclude all directories with special files (check McAfee System Events Log)"
	3247	LogFile "WARNING: - Disable the scanner during the backup"
	3248	fi
	3249
[1684]	3250	#
	3251	# If we have a USB device we need to store info
	3252	# and remove it from the parameters line
	3253	#
[747]	3254	if [ "$#" -ne "0" ] ; then
[1684]	3255	if [ "$1" = "--usb" ] ; then
	3256	shift
	3257	USBDEVICE=$1
	3258	if [ _"$USBDEVICE" = _"" ]; then
	3259	Die "No USB device specified"
	3260	fi
	3261	shift
	3262	fi
	3263	fi
	3264
	3265	if [ "$#" -ne "0" ] ; then
[747]	3266	if [ "$1" = "--findkernel" ] ; then
[2880]	3267	resk=`TryToFindKernelPath`
[1336]	3268	# Avoids logfile content for mondo
	3269	export MONDO_SHARE=""
[2880]	3270	if [ "$resk" = "" ] ; then
[2838]	3271	if [ $KERNEL_IS_XEN = "yes" ]; then
	3272	echo "$xenkernelpath"
[2963]	3273	LogFile "INFO: xenkernelpath = $xenkernelpath"
[2860]	3274	MindiExit 0
[2838]	3275	else
[2860]	3276	MindiExit -1
[2838]	3277	fi
[747]	3278	else
[2880]	3279	echo "$resk"
[2963]	3280	LogFile "INFO: kernelpath = $resk"
[2860]	3281	MindiExit 0
[747]	3282	fi
[1720]	3283	elif [ "$1" = "--locatedeps" ] ; then
	3284	[ ! "$2" ] && Die "Please specify the binary to look at"
[2438]	3285	LocateDeps $*
[1720]	3286	# Avoids logfile content for mondo
	3287	export MONDO_SHARE=""
	3288	MindiExit $?
[1815]	3289	elif [ "$1" = "--readalllink" ] ; then
	3290	[ ! "$2" ] && Die "Please specify the binary to look at"
	3291	# Avoids logfile content for mondo
	3292	export MONDO_SHARE=""
[3231]	3293	mr-read-all-link $2
[1815]	3294	MindiExit $?
[3518]	3295	elif [ "$1" = "--makebcf" ] ; then
[3520]	3296	[ ! "$2" ] && Die "Please specify the boot loader to check (syslinux, grub, grub2)"
[3518]	3297	MakeBootConfFile $2
[3519]	3298	MindiExit 0
[2731]	3299	elif [ "$1" = "--makemessage" ] ; then
[2948]	3300	MakeMessageFile \| cut -c1-80
[2731]	3301	MindiExit 0
[747]	3302	elif [ "$1" = "--makemountlist" ] ; then
	3303	[ ! "$2" ] && Die "Please specify the output file"
	3304	MakeMountlist $2
[2432]	3305	CheckMountlist $2
[1336]	3306	# Avoids logfile content for mondo
	3307	export MONDO_SHARE=""
[925]	3308	MindiExit $?
	3309	elif [ "$1" = "-V" ] \|\| [ "$1" = "-v" ] \|\| [ "$1" = "--version" ] \|\| [ "$1" = "-version" ] ; then
	3310	echo "Mindi v$MINDI_VERSION"
[1336]	3311	# Avoids logfile content for mondo
	3312	export MONDO_SHARE=""
[925]	3313	MindiExit 0
[747]	3314	elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
[940]	3315	MONDO_TMP=$2
	3316	# Change MINDI_TMP for the one provided by mondo
	3317	# So that it can get back the built files
[2153]	3318	if [ _"$MONDO_TMP" = _"" ]; then
	3319	Die "MONDO_TMP is empty, aborting"
	3320	fi
	3321	if [ _"$MONDO_TMP" = _"/" ]; then
	3322	Die "MONDO_TMP is /, aborting"
	3323	fi
[2092]	3324	mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
[1010]	3325	rmdir $MINDI_TMP
[1486]	3326	export MINDI_TMP=$MONDO_TMP
[953]	3327	mkdir -p $MINDI_TMP
[2238]	3328
[1696]	3329	# This is the scratch dir in mondo - subdir images
[1880]	3330	MINDI_CACHE=$3
[3388]	3331	LogFile "MINDI_CACHE = $MINDI_CACHE"
[2238]	3332
[925]	3333	kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
[2681]	3334	[ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
	3335
[747]	3336	###
	3337	### Sq-Modification...
	3338	### Attempt to locate kernel specific module path
	3339	### if module path is found then use it other wise use uname -r to set it...
	3340	###
[2629]	3341	if [ $KERNEL_IS_XEN = "yes" ]; then
[3149]	3342	LogAll "INFO: xenkernelpath = $xenkernelpath"
[2629]	3343	fi
[2657]	3344	kernelname=`echo $kernelpath \| cut -d'-' -f2- \| sed 's/.[bg]z[2]*$//'`
[3231]	3345	if [ ! -d "/lib/modules/$kernelname" ]; then
[3149]	3346	LogAll "WARNING: Module path for ${kernelpath} not found..."
	3347	LogAll " using running kernel\'s modules."
[2292]	3348	kernelname=$KERVERRUN
[3149]	3349	else
[3426]	3350	LogAll "INFO: Using modules for kernel: ${kernelname}"
[747]	3351	fi
[3149]	3352	LogAll "INFO: kernelname = $kernelname"
	3353	LogAll "INFO: kernelpath = $kernelpath"
[747]	3354	###
	3355	### end of Sq-Modification
	3356	###
[925]	3357	TAPEDEV=$5
	3358	TAPESIZE=$6
	3359	FILES_IN_FILELIST=$7
	3360	USE_LZO=$8
	3361	CDRECOVERY=$9
[747]	3362	if [ "${10}" = "(null)" ] \|\| [ "${10}" = "" ] ; then
	3363	IMAGE_DEVS=""
	3364	else
	3365	IMAGE_DEVS="`echo "${10}" \| tr '\|' ' '`"
	3366	fi
[925]	3367	if [ "${11}" ] ; then
	3368	LILO_OPTIONS=""
[3149]	3369	# LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
[925]	3370	fi
	3371	LAST_FILELIST_NUMBER=${12}
[747]	3372	ESTIMATED_TOTAL_NOOF_SLICES=${13}
[2564]	3373	export MINDI_EXCLUDE_DEVS="${14}"
[747]	3374	USE_COMP="${15}"
	3375	USE_LILO="${16}"
[925]	3376	USE_STAR="${17}"
	3377	INTERNAL_TAPE_BLOCK_SIZE="${18}"
[747]	3378	DIFFERENTIAL="${19}"
[998]	3379	USE_GZIP="${20}"
[3353]	3380	USE_LZMA="${21}"
	3381	NOT_BOOT="${22}"
[3397]	3382	BOOT_TYPE="${23}"
[747]	3383	[ "$USE_COMP" = "" ] && USE_COMP=yes
[998]	3384	[ "$USE_GZIP" = "" ] && USE_GZIP=no
[3353]	3385	[ "$USE_LZMA" = "" ] && USE_LZMA=no
[747]	3386	[ "$NOT_BOOT" = "" ] && NOT_BOOT=no
[3565]	3387	[ "$TAPEDEV" ] && LogAll "INFO: This is a tape-based backup. Fine."
[1696]	3388	# MONDO_ROOT is the real scratchdir
[1880]	3389	MONDO_ROOT=`echo $MINDI_CACHE \| sed 's/\(.\)\/./\1/'`
[938]	3390	if [ _"$MONDO_ROOT" != _"" ]; then
	3391	mkdir -p $MONDO_ROOT
	3392	else
	3393	Die "MONDO_ROOT is undefined"
	3394	fi
[747]	3395	else
[3149]	3396	LogScreen "Syntax: mindi (--custom ....)"
[925]	3397	MindiExit -1
[747]	3398	fi
	3399	fi
[2238]	3400
	3401	if [ _"$MINDI_CACHE" != _"" ]; then
	3402	rm -rf $MINDI_CACHE/* 2> /dev/null
	3403	mkdir -p $MINDI_CACHE
	3404	fi
	3405
[747]	3406	[ "$CDRECOVERY" = "yes" ] \|\| CDRECOVERY=no
	3407
[1684]	3408	if [ _"$MONDO_SHARE" = _"" ]; then
[3565]	3409	LogAll "Mindi Linux mini-distro generator v$MINDI_VERSION"
	3410	LogAll "Latest Mindi is available from http://www.mondorescue.org"
	3411	LogAll "BusyBox sources are available from http://www.busybox.net"
	3412	LogAll "------------------------------------------------------------------------------"
[747]	3413	else
[3426]	3414	LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
[747]	3415	fi
[3231]	3416	if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
[3565]	3417	LogAll "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 \| head -1`"
[1005]	3418	else
[3565]	3419	LogAll "ERROR: Unable to find mindi-busybox, please install it"
[1005]	3420	MindiExit -1
	3421	fi
[747]	3422
	3423	for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
[3111]	3424	modinfo $i 2> /dev/null 1> /dev/null
[3014]	3425	if [ $? -eq 0 ]; then
	3426	modprobe $i 2>&1 > /dev/null
	3427	fi
[747]	3428	done
	3429
[2963]	3430	LogFile "DIFFERENTIAL = $DIFFERENTIAL"
	3431	LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
	3432	LogFile "NOT_BOOT = '$NOT_BOOT'"
[747]	3433	if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
[3565]	3434	LogAll "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
[3278]	3435	MakeMondoConfigFile $MINDI_TMP/$MRCFG
[940]	3436	MakeMountlist $MINDI_TMP/mountlist.txt
[2432]	3437	CheckMountlist $MINDI_TMP/mountlist.txt
[940]	3438	mkdir -p $MINDI_TMP/small-all/tmp
[3565]	3439	cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} $MINDI_TMP/small-all/tmp 2>> $LOGFILE \|\| Die "Cannot copy small all.tar.gz"
	3440	(cd $MINDI_TMP/small-all ; tar -cv ./tmp \| gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log \|\| Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log)
[747]	3441	sleep 2
[3565]	3442	LogAll "Done. Exiting."
[925]	3443	MindiExit 0
[747]	3444	fi
	3445
[1690]	3446	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[3565]	3447	LogAll "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
[1684]	3448	fi
	3449
[747]	3450	if [ "$kernelpath" = "" ] ; then
[1335]	3451	[ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
[3522]	3452	echo -en "\nDo you want to use your own kernel to build the boot disk ([y]/n) ?"
[966]	3453	read ch
	3454	if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
	3455	USE_OWN_KERNEL="yes"
[1809]	3456	else
	3457	USE_OWN_KERNEL="no"
[747]	3458	fi
	3459	if [ "$USE_OWN_KERNEL" = "yes" ]; then
[925]	3460	kernelpath=`TryToFindKernelPath`
	3461	if [ "$kernelpath" = "" ] ; then
	3462	echo -n "Please enter kernel path : "
	3463	read kernelpath
	3464	fi
[747]	3465	fi
	3466	fi
[3231]	3467
[1880]	3468	echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
[3565]	3469	[ "$(($RANDOM%64))" -eq "0" ] && LogAll "INFO: Dude, I've looked inside your computer and it's really dusty..."
[747]	3470
[3248]	3471	mountpoint=$MINDI_TMP/mountpoint.$$
[1983]	3472	PrepareDataDiskImages
	3473
[3522]	3474	MakeBootInitFile $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath \| cut -f1` \|\| Die "Could not create initrd.img"
	3475
[747]	3476	[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
	3477	...Or type 'memtest' to test your PC's RAM thoroughly.\n"
	3478
[1684]	3479	if [ _"$MONDO_SHARE" = _"" ]; then
[1983]	3480	OfferToMakeBootableISO
[1684]	3481	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
[1983]	3482	OfferToMakeBootableUSB
[1684]	3483	fi
[3522]	3484	LogAll "INFO: Mindi Finished"
[747]	3485	elif [ "$TAPEDEV" ] ; then
[2078]	3486	if [ "$ARCH" != "ia64" ] ; then
	3487	# We need to keep the img file as boot file for ia64 platform
	3488	rm -f $MINDI_CACHE/{img,iso}
	3489	else
	3490	rm -f $MINDI_CACHE/*iso
	3491	fi
[1898]	3492	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	3493	OfferToMakeBootableUSB
[1898]	3494	fi
[1983]	3495	OfferToMakeBootableISO
[1880]	3496	if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
	3497	cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
[747]	3498	else
[925]	3499	Die "Cannot find all.tar.gz, to be written to tape"
[747]	3500	fi
[1695]	3501	elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	3502	OfferToMakeBootableUSB
[747]	3503	else
[1983]	3504	OfferToMakeBootableISO
[747]	3505	fi
[3391]	3506
[3396]	3507	if [ -f $MINDI_TMP/$MRCFG ]; then
[3425]	3508	LogFile "INFO: Your $MRCFG file is:"
	3509	LogFile "--------------------------"
	3510	cat $MINDI_TMP/$MRCFG >> $LOGFILE
	3511	LogFile "--------------------------"
[3391]	3512	else
[3421]	3513	if [ _"$MONDO_SHARE" != _"" ] ; then
[3565]	3514	LogAll "ERROR: You don't have a $MRCFG file !"
[3421]	3515	fi
[3391]	3516	fi
[747]	3517	# cleanup
[925]	3518	MindiExit 0

Note: See TracBrowser for help on using the repository browser.

Download in other formats: