Context Navigation

source: MondoRescue/branches/3.2/mindi/mindi@ 3569

Visit:

Last change on this file since 3569 was 3569, checked in by Bruno Cornec, 8 years ago
Better log for keyboard detection
Property svn:executable set to ``* Property svn:keywords set to `Rev Id`
File size: 124.3 KB

Rev	Line
[747]	1	#!/bin/bash
	2
	3	# $Id: mindi 3569 2016-04-25 18:03:36Z bruno $
	4	#
	5	#-----------------------------------------------------------------------------
	6	# mindi - mini-Linux distro based on the user's filesystem & distribution
	7	#
[1880]	8	# Mindi can create a multi-image boot/root kit. The first image is the boot
[747]	9	# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
	10	# the third disk is data disk #2; and so it goes.
	11	#
	12	# See http://www.mondorescue.org for details.
	13	#-----------------------------------------------------------------------------
	14
	15	### Which arch are we on (useful for ia64 port)
[1565]	16	ARCH=`/bin/uname -m`
[2292]	17	KERVERRUN=`/bin/uname -r`
	18	# By default we use the running kernel as a reference
	19	KERVER=$KERVERRUN
[747]	20
[2442]	21	# In case of problem with udev you can try to add udevdebug
[2564]	22	MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
[3053]	23	MINDI_DEFAULT_BOOT_OPTION="interactive"
	24	# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
	25	# So this parameter only applies to non CD recovery.
	26	MINDI_BOOT_TIMEOUT="300"
[747]	27
[1691]	28	MINDI_REV=PBREV
	29	MINDI_VER=PBVER
[747]	30
	31	MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
	32	MINDI_PREFIX=XXX
	33	MINDI_CONF=YYY
	34	MINDI_SBIN=${MINDI_PREFIX}/sbin
[934]	35	MINDI_LIB=LLL
[3149]	36	MINDI_CACHE=/var/cache/mindi
[747]	37
[3278]	38	MRCFG=mondorestore.cfg
	39
[925]	40	# Temporary directory for mindi
[3499]	41	TMPDIR=${TMPDIR:=/tmp}
	42	if [ ! -d $TMPDIR ]; then
	43	mkdir -p $TMPDIR
	44	fi
[925]	45
[3522]	46	EXTRA_SPACE=150000 # increase if you run out of ramdisk space
[747]	47
	48	PROMPT_MAKE_CD_IMAGE="yes"
	49	# Ask if you want to make a CD Image to be written?
[3522]	50	# if this is set to 'no' in the conf file, then the image will be created automatically
[747]	51
[1684]	52	PROMPT_MAKE_USB_IMAGE="yes"
	53	# Ask if you want to make a USB Image to be written?
[3522]	54	# if this is set to 'no' in the conf file, then the image will be created automatically
[1684]	55
[966]	56	USE_OWN_KERNEL="yes"
[747]	57	# If set to "no", you will be prompted for whether or not
	58	# you want to use your own kernel, or the supplied default.
	59	# If "yes" mindi will automatically use your own kernel.
[925]	60
[2629]	61	KERNEL_IS_XEN="no"
	62	# If set to "no", the kernel is not a Xen kernel
	63	# If "yes", mindi will modify isolinux.cfg for the Xen kernel.
[2880]	64	xenkernelpath=""
[2629]	65
[747]	66	MY_FSTAB=/etc/fstab
	67	TAPE_MODS="ht st osst ide-tape ide_tape"
[3540]	68	SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa hpdsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
[747]	69
	70	# ide-probe-mod
[3463]	71	IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc"
[747]	72	PCMCIA_MODS="pcmcia_core ds yenta_socket"
[3474]	73	USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
[3446]	74	NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
[3517]	75	CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 nls_cp437 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs nls_utf8"
[1230]	76	# Replace with that line for HP OCMP e.g.
[2073]	77	#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
[3055]	78	DENY_MODS="kqemu vxfen"
[1399]	79	# Force some modules to be included
[1354]	80	FORCE_MODS=""
[925]	81
[747]	82	LOGFILE=/var/log/mindi.log
	83	BOOT_MEDIA_MESSAGE="\
[3173]	84	To format and restore all files automatically, type '0enuke07' <enter>.\n\
	85	To restore some/all files interactively, type '0einteractive07' <enter>.\n\
	86	To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
	87	To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
	88	\n\
	89	You may add one or more parameters as well as per the function keys below\n\
	90	e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
	91	\n\
	92	If restoring from a local external disk or USB key, do not connect it \n\
	93	until the boot-up has finished.\n\
	94	\n\
	95	\n0eF107-Main \| Boot Parameters 0eF207-1/2 \| 0eF307-2/2 \| 0eF407-PXE\n\
[747]	96	"
[3377]	97	FDISK=$MINDI_SBIN/mr-parted2fdisk
[747]	98
[925]	99	# Using a config file allow to overwrite some values
	100	MINDI_CONFIG="$MINDI_CONF/mindi.conf"
	101	if [ -f $MINDI_CONFIG ]; then
	102	. $MINDI_CONFIG
	103	fi
[1885]	104	DEPLIST_FILE="$MINDI_CONF/deplist.txt"
[2409]	105	DEPLIST_DIR="$MINDI_CONF/deplist.d"
	106
[3502]	107	# Debian 8 system e.g. use xorriso for UEFI support.
	108	# However, they use exactly the same command line parameters as mkisofs, so just
	109	# use it if it's available.
	110	ISO_CMD="/usr/bin/xorriso"
	111
	112	# Mandriva system e.g. use cdrkit, which uses genisoimage.
	113	# However, they use exactly the same command line parameters as mkisofs, so just
	114	# use it if it's available.
	115	if [ ! -x $ISO_CMD ]; then
[3505]	116	ISO_CMD="/usr/bin/genisoimage"
[3515]	117	# For compatibility with previous versions default to mkisofs
	118	if [ ! -x $ISO_CMD ]; then
	119	ISO_CMD="/usr/bin/mkisofs"
	120	fi
	121	if [ ! -x $ISO_CMD ]; then
	122	LogFile "NOTE: No CD image (ISO file) utility found"
	123	ISO_CMD = ""
	124	fi
	125	else
	126	ISO_CMD="/usr/bin/xorriso -as mkisofs"
[3502]	127	fi
	128
[3534]	129	ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi -V Mindi_Image -o $MINDI_CACHE/mindi.iso "
[925]	130
[3421]	131	# Mindi set this as default in case it's invoked alone
	132	BOOT_TYPE="BIOS"
	133	# and we also check whether we're UEFI or not.
	134	if [ -d "/sys/firmware/efi" ]; then
	135	BOOT_TYPE="UEFI"
[3429]	136	else
	137	# Find MBR in case of bootable USB device to build
	138	MBRFILE=/usr/lib/syslinux/mbr.bin
	139	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
	140	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
	141	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
	142	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
[3421]	143	fi
[3403]	144
[2880]	145	# Function to log on screen only
	146	LogScreen() {
[3368]	147	if [ -e /dev/stderr ] ; then
	148	echo -e "$1" >> /dev/stderr
	149	elif [ -e /usr/bin/logger ] ; then
	150	/usr/bin/logger -s $1
	151	fi
[2880]	152	}
[2685]	153
[2880]	154	# Function to log in log file only
	155	LogFile() {
	156
[3368]	157	echo -e "$1" >> $LOGFILE
	158	if [ _"$2" != _"" ]; then
[3403]	159	grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
[3432]	160	rm -f "$2"
[3368]	161	fi
[2880]	162	}
	163
	164	# Function to log in both screen and logfile
	165	LogAll() {
[3368]	166	LogScreen "$1"
	167	LogFile "$1" "$2"
[2880]	168	}
	169
[2963]	170	# Last function called before exiting
	171	# Parameter is exit code value
	172	# Should be declared here as used immediately below potentialy
	173	MindiExit() {
[3522]	174	LogFile "INFO: Mindi $MINDI_VERSION is exiting"
	175	LogFile "INFO: End date : `date`"
[2963]	176	if [ _"$MONDO_SHARE" != _"" ] ; then
	177	echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
[2995]	178	if [ -f $LOGFILE ]; then
	179	cat $LOGFILE >> /var/log/mondoarchive.log
	180	else
	181	echo "No LOGFILE available in that mindi run" >> /var/log/mondoarchive.log
	182	fi
[2963]	183	echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
	184	fi
[2880]	185
[2963]	186	cd /
	187	sync&
	188
	189	# Clean temporary files only when standalone mindi
	190	if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
	191	rm -Rf $MINDI_TMP
	192	fi
	193	exit $1
	194	}
	195
[2685]	196	Die() {
	197	local i
	198	if [ "$1" = "" ] ; then
[3149]	199	LogAll "FATAL ERROR"
[2685]	200	else
[3149]	201	LogAll "FATAL ERROR. $1"
[2685]	202	fi
	203	if [ _"$2" != _"" ]; then
[3403]	204	grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
[2685]	205	fi
	206	rm -f "$2"
	207
[3149]	208	LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
	209	LogAll "See http://www.mondorescue.org for more information."
	210	LogAll "WE CANNOT HELP unless you enclose that file.\n"
[2685]	211	MindiExit -1
	212	}
	213
[1485]	214	# Now we can create what we need
[2150]	215	MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
	216	if [ $? -ne 0 ]; then
	217	df $TMPDIR
	218	Die "Unable to create a temporary directory ! Check space on $TMPDIR"
	219	fi
[2153]	220	if [ _"$MINDI_TMP" = _"" ]; then
	221	Die "MINDI_TMP is empty, aborting"
	222	fi
	223	if [ _"$MINDI_TMP" = _"/" ]; then
	224	Die "MINDI_TMP is /, aborting"
	225	fi
[2150]	226	export MINDI_TMP
[940]	227
[747]	228	# ----------------------------------------------------------------------------
	229
	230
	231	AbortHere() {
[3546]	232	[ "$mountpoint" ] && sync && umount $mountpoint 2>> $LOGFILE
[747]	233	Die "Program is terminating in response to signal received from OS/user"
	234	}
	235
	236
	237	Aborted() {
	238	trap SIGHUP SIGTERM SIGTRAP SIGINT
[1880]	239	[ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindiimg $MINDI_CACHE/gz $MINDI_CACHE/mindi.iso
[747]	240	Die "User abort."
	241	}
	242
	243
	244	AddFileToCfgIfExists() {
	245	[ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
	246	}
	247
	248
	249	AddKeyboardMappingFile() {
	250	local mappath r included_list included_item i res ii sss
	251	mappath=$1
	252	KBDEPTH=$(($KBDEPTH+1))
	253	[ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
	254	if [ -e "$bigdir/$mappath" ] ; then
[3149]	255	LogFile "INFO: $mappath already added"
[747]	256	return
	257	elif [ -d "$bigdir/$mappath" ] ; then
	258	echo "Cannot add $mappath: it's a directory. Sorry."
	259	return
	260	fi
[3149]	261	LogFile "INFO: Added kbd map $mappath"
[747]	262	if [ ! -e "$mappath" ] ; then
[3149]	263	mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[747]	264	if [ ! -e "$mappath" ] ; then
[3149]	265	LogAll "WARNING: Cannot add $mappath: kbd map file not found"
[747]	266	return
	267	fi
	268	fi
	269
[3149]	270	tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log \| (cd "$bigdir" ; tar xf -) \|\| LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
[747]	271	if [ "`echo $mappath \| grep -F ".gz"`" ] ; then
[3023]	272	included_list=`gzip -dc $mappath \| grep -Fi include \| sed s/'"'//g \| cut -d' ' -f2`
[747]	273	else
[3023]	274	included_list=`grep -Fi include $mappath \| sed s/'"'//g \| cut -d' ' -f2`
[747]	275	fi
	276	for included_item in $included_list ; do
[925]	277	if [ ! -e "$included_item" ] ; then
[3149]	278	sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
[1764]	279	[ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
[925]	280	for ii in $sss ; do
[3546]	281	[ -e "$ii" ] && AddKeyboardMappingFile $ii
[925]	282	done
	283	else
	284	AddKeyboardMappingFile $included_item
	285	fi
[747]	286	done
	287	}
	288
	289
	290	CopyDependenciesToDirectory() {
[3403]	291	local outdir incoming counter d found tdir templog
[747]	292	outdir=$1
[3403]	293	templog=$MINDI_TMP/$$.log
[747]	294	mkdir -p $outdir
	295	incoming=`ReadLine`
[3522]	296	counter=$3
[3403]	297	> $templog
	298
[747]	299	while [ "$incoming" != "" ] ; do
[3522]	300	if [ "$3" = "1" ]; then
	301	counter=$(($counter+1))
	302	LogProgress $counter $2
	303	fi
[1526]	304	# Non absolute file names should not arrive till here => skipped
	305	if [ `echo "$incoming" \| cut -c1` != '/' ]; then
[3149]	306	LogAll "WARNING: Unable to handle $incoming"
[1526]	307	incoming=`ReadLine`
	308	continue
	309	fi
	310	# no parent directory of incoming should be a link, copy is not possible in that case
	311	d=`dirname "$incoming"`
	312	found="false"
	313	while [ $d != "/" -a $found = "false" ]; do
	314	[ -h "$d" ] && found="true"
	315	d=`dirname "$d"`
	316	done
[3166]	317	if [ -d "$incoming" -a ! -h "$incoming" ]; then
[3522]	318	find $incoming/* -maxdepth 0 2> /dev/null \| CopyDependenciesToDirectory $outdir 0 0
[1526]	319	elif [ -e "$incoming" ] && [ $found = "false" ]; then
[3075]	320	if [ ! -h "$incoming" ]; then
[3405]	321	tar cf - -C / $incoming 2> $templog \| (cd "$outdir" ; tar xf -) \|\| Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
[3075]	322	else
	323	tdir=`dirname "$incoming"`
	324	if [ ! -e "$outdir/$tdir" ]; then
	325	mkdir -p "$outdir/$tdir"
	326	fi
	327	cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
	328	fi
[1989]	329	# Only uncompress modules if not using udevd
	330	if [ "`echo "$incoming" \| grep "lib/modules/.\..o\.gz"`" != "" ] && [ "`ps auxww \| grep -v grep \| grep -qw udevd`" != "" ]; then
[3149]	331	gunzip -f $outdir/$incoming \|\| LogAll "WARNING: Cannot gunzip $outdir/$incoming"
[925]	332	fi
[3075]	333	[ -x "$outdir" ] && StripExecutable $outdir
[747]	334	fi
	335	incoming=`ReadLine`
	336	done
	337	}
	338
	339
	340	CountItemsIn() {
	341	local r
	342	r=0
	343	for q in $1 ; do
	344	r=$(($r+1))
	345	done
	346	echo $r
	347	}
	348
	349
	350	DropOptimizedLibraries() {
	351	local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
	352	filelist=$1
	353	outdir=$2
	354
	355	list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
	356	if [ "$list_of_optimized_libraries" = "" ] ; then
[859]	357	return 0
[747]	358	fi
	359	echo -en "Dropping i686-optimized libraries if appropriate"
	360	for optimized_lib_name in $list_of_optimized_libraries ; do
[859]	361	echo -en "."
	362	reason=""
[1483]	363	vanilla_lib_name=`echo "$optimized_lib_name" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
[859]	364	echo "$vanilla_lib_name" >> $filelist
[2963]	365	LogFile "INFO: Adding $vanilla_lib_name to filelist"
[859]	366	mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
	367	rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
[2168]	368
	369	# This may return multiple files
[3231]	370	for resolved in `mr-read-all-link $vanilla_lib_name`; do
[2963]	371	LogFile "INFO: Adding as deps $resolved to filelist"
[2168]	372	vanilla_resolved_name=`echo "$resolved" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
[3149]	373	if [ "$vanilla_resolved_name" != "$resolved" ]; then
	374	mkdir -p $outdir$resolved> /dev/null 2> /dev/null
	375	rmdir $outdir$resolved > /dev/null 2> /dev/null
	376	ln -sf $vanilla_resolved_name $outdir$resolved
	377	LogFile "INFO: Excluding deps $resolved"
	378	grep -Fvx "$resolved" "$filelist" > $filelist.tmp
	379	LogFile "INFO: Replacing it with $vanilla_resolved_name"
	380	echo "$vanilla_resolved_name" >> $filelist.tmp
	381	mv -f $filelist.tmp $filelist
	382	fi
[2168]	383	done
[747]	384	done
[925]	385	$AWK '{ print $1; }' $filelist \| sort -u > $filelist.tmp
[747]	386	mv -f $filelist.tmp $filelist
	387	echo -e "$DONE"
	388	}
	389
	390
	391	FindAndAddUserKeyboardMappingFile() {
	392	local r res mapfile mappath included_item included_list keyfile mp locale
[3149]	393	LogAll "INFO: Analyzing your keyboard's configuration."
[3231]	394	KEYDIR=/usr/lib/kbd
[747]	395	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
[3347]	396	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
	397	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
[3231]	398	[ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
[747]	399	if [ ! -e "$KEYDIR" ] ; then
[3149]	400	LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
[747]	401	return 0
[3569]	402	else
	403	LogFile "INFO: KEYDIR=$KEYDIR"
[747]	404	fi
	405	if [ -e "/etc/sysconfig/keyboard" ] ; then
[2963]	406	LogFile "INFO: Red Hat-style config detected."
[747]	407	keyfile=/etc/sysconfig/keyboard
[3257]	408	elif [ -e "/etc/vconsole.conf" ] ; then
	409	LogFile "INFO: New Fedora style config detected."
	410	keyfile=/etc/vconsole.conf
[747]	411	elif [ -e "/etc/rc.d/rc.keymap" ] ; then
[2963]	412	LogFile "INFO: Slackware-style config detected."
[747]	413	keyfile=/etc/rc.d/rc.keymap
	414	elif [ -e "/etc/rc.config" ] ; then
[2963]	415	LogFile "INFO: Debian-style config detected."
[747]	416	keyfile=/etc/rc.config
	417	elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
[2963]	418	LogFile "INFO: Debian-style config detected."
[747]	419	mkdir -p $bigdir/tmp
[3278]	420	echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
[747]	421	KBDEPTH=0
	422	mkdir -p $bigdir/etc/console
[963]	423	cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
[2864]	424	echo ""
[747]	425	echo -e "$DONE"
	426	return 0
[2828]	427	elif [ -e "/etc/console-setup/boottime.kmap.gz" ] \|\| [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
[2963]	428	LogFile "INFO: Ubuntu-style config detected."
[1713]	429	mkdir -p $bigdir/tmp
[2828]	430	if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
	431	kbdfile="/etc/console-setup/boottime.kmap.gz"
	432	else
	433	kbdfile="/etc/console-setup/cached.kmap.gz"
	434	fi
[3278]	435	echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
[1713]	436	KBDEPTH=0
	437	mkdir -p $bigdir/etc/console-setup
[2828]	438	cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
[2864]	439	echo ""
[1713]	440	echo -e "$DONE"
	441	return 0
[2744]	442	elif [ -e "/etc/rc.conf" ] ; then
[2963]	443	LogFile "INFO: ArchLinux config detected."
[2744]	444	keyfile=/etc/rc.conf
[1465]	445	elif [ -e "/etc/conf.d/keymaps" ] ; then
[2963]	446	LogFile "INFO: Gentoo-style config detected."
[1465]	447	keyfile=/etc/conf.d/keymaps
[3191]	448	elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
	449	LogFile "INFO: X11-style config detected."
	450	keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
[747]	451	else
[3149]	452	LogFile "Searching for rc.config ..."
[747]	453	keyfile=`find /etc -name rc.config \| head -n1`
	454	if [ "$keyfile" = "" ] \|\| [ ! -e "$keyfile" ] ; then
[3149]	455	LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
[747]	456	return
	457	else
[2963]	458	LogFile "INFO: Found $keyfile"
[747]	459	fi
	460	fi
	461	if [ ! -e "$KEYDIR/keymaps" ] ; then
[3149]	462	LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
[747]	463	return
	464	fi
[2963]	465	LogFile "INFO: keyfile=$keyfile"
[2999]	466	# For SLES we need to remove the .map.gz extension Cf #614
	467	locale=`grep -F KEYTABLE "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2 \| sed 's/.map.gz$//'`
[747]	468	[ ! "$locale" ] && locale=`grep '.map$' "$keyfile" \| sed 's/^.* //'` # Slackware
[3257]	469	[ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2` # Gentoo, ArchLinux & New fedora
[3191]	470	[ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" \| grep -v '^#' \| awk '{print $3}' \| tr -d '"'` # Fedora 19
[2963]	471	LogFile "INFO: locale=$locale"
[1764]	472	#
	473	# Process the keymaps dir once for all
	474	# AddKeyboardMappingFile will use it recursively
	475	#
	476	find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
	477	mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep -F "/${locale}." \| grep -vx " #."`
	478	[ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[747]	479	# If we have multiple keymaps then log it !!
[3149]	480	echo "$mp" \| grep -q " " >> $LOGFILE
[747]	481	if [ $? -eq 0 ]; then
[2963]	482	LogAll "WARNING: Multiple keymaps found: $mp"
	483	LogFile "INFO: The following one will be used"
[747]	484	fi
	485	for i in $mp ; do
	486	mappath=$i
	487	[ -e "$i" ] && [ ! -d "$i" ] && break
	488	done
	489	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[2958]	490	mappath=$(find / -wholename "/kbd/keymaps//$locale \| head -1")
[747]	491	fi
[2963]	492	LogFile "INFO: mappath = $mappath"
[747]	493	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[3149]	494	LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
[747]	495	return
	496	fi
[3535]	497	echo -en "INFO: Adding keyboard mapping tables"
[747]	498	mkdir -p $bigdir/tmp
[3278]	499	echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
[2055]	500	KBDEPTH=0
[747]	501	AddKeyboardMappingFile $mappath
[2864]	502	echo ""
[747]	503	echo -e "$DONE"
[1764]	504	rm -f $MINDI_TMP/keymaps.find
[747]	505	return 0
	506	}
	507
	508
[3241]	509	FindLdlinux32Binary() {
	510	LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
	511	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
	512	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
	513	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
	514	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
[3303]	515	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
	516	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
[3241]	517	#[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 \| grep -x "/.*/ldlinux.c32"`
	518	if [ ! -e "$LDLINUXC32" ]; then
	519	LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
	520	LDLINUXC32=/tmp/idoesnthopefullyexist
	521	else
	522	LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
	523	fi
	524	}
	525
	526
[2629]	527	FindMboot32Binary() {
	528	MBOOTC32=/usr/lib/syslinux/mboot.c32
	529	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
	530	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
	531	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
	532	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
[3303]	533	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
	534	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
[2629]	535	[ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 \| grep -x "/.*/mboot.c32"`
[2921]	536	[ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[2963]	537	LogFile "INFO: Found mboot.c32 at $MBOOTC32"
[2629]	538	}
	539
[3476]	540	FindLdlinuxe64Binary() {
	541	LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
	542	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
	543	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
	544	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
	545	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
	546	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
	547	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 \| grep -x "/.*/ldlinux.e64"`
	548	[ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
	549	LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
	550	}
	551
	552	FindSyslinux64EFI() {
	553	SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
	554	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
	555	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
	556	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
	557	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
	558	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
	559	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi \| grep -x "/.*64/syslinux.efi"`
[3491]	560	[ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[3476]	561	LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
	562	}
	563
[747]	564	FindIsolinuxBinary() {
	565	ISOLINUX=/usr/lib/isolinux.bin
	566	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
[1491]	567	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
[747]	568	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
	569	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
[1491]	570	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
[3304]	571	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
[1854]	572	[ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin \| grep -x "/.*/isolinux.bin"`
[2921]	573	[ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[2963]	574	LogFile "INFO: Found isolinux.bin at $ISOLINUX"
[747]	575	}
	576
	577
	578	GenerateGiantDependencyList() {
[3522]	579	local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item tempdepfile modres noof_lines lvmversion lvmresolved
[747]	580
[3522]	581	echo -en "INFO: Analyzing dependency requirements"
[747]	582	outfile=$1
[940]	583	tempfile=$MINDI_TMP/$$.txt
[747]	584	incoming=`ReadLine`
	585
	586	> $tempfile
	587	progress=0
	588	res=0
	589	noof_lines=$2
	590	while [ "$incoming" != "" ] ; do
[861]	591	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	592	incoming=`ReadLine`
	593	continue
	594	fi
	595	if [ "$incoming" = "LVMFILES:" ] ; then
	596	break
	597	fi
[747]	598	filelist=`GenerateListForFile "$incoming"`
	599	r=$?
[3149]	600	[ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
[747]	601	res=$(($res+$r))
[2963]	602	# LogFile "INFO: '$incoming' generates filelist '$filelist'"
[747]	603	for fname in $filelist ; do
[3321]	604	[ "$fname" != "" ] && echo "$fname" >> $tempfile
[747]	605	done
	606	progress=$(($progress+1))
[3149]	607	LogProgress $progress $noof_lines
[747]	608	incoming=`ReadLine`
	609	done
[861]	610	if [ "$incoming" = "LVMFILES:" ] ; then
	611	incoming=`ReadLine`
	612	lvmversion=""
	613	while [ "$incoming" != "" ] ; do
	614	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	615	incoming=`ReadLine`
	616	continue
	617	fi
	618	filelist=`GenerateListForFile "$incoming"`
	619	for tool in $filelist ; do
	620	lvmresolved=`readlink -f $tool`
[1342]	621	if [ "$tool" = "$lvmresolved" ]; then
[861]	622	echo "$tool" >> $tempfile
	623	elif echo "$lvmresolved" \| grep "lvmiopversion" &> /dev/null ; then
	624	if [ "$lvmversion" = "" ] ; then
	625	lvmversion=`$lvmresolved`
	626	echo "$lvmresolved" >> $tempfile
	627	fi
	628	toolstripped=`echo $tool \| $AWK -F / '{print $NF;}'`
[1342]	629	if [ "$lvmversion" = "200" ]; then
[861]	630	# pvdata and lvmcreate_initrd don't exist in LVM2
	631	case "$toolstripped" in
	632	"pvdata")
	633	continue
	634	;;
	635	"lvmcreate_initrd")
	636	continue
	637	;;
	638	esac
	639	fi
	640	toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
	641	if [ -e "$toolpath" ] ; then
	642	echo "$toolpath" >> $tempfile
	643	echo "$tool" >> $tempfile
	644	else
	645	toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
	646	fi
	647	if [ -e "$toolpath" ] ; then
	648	echo "$toolpath" >> $tempfile
	649	echo "$tool" >> $tempfile
	650	else
	651	echo "Where are your LVM-Tools? Couldn't find $tool"
	652	fi
	653	else
	654	echo "$tool" >> $tempfile
	655	fi
	656	done
	657	progress=$(($progress+1))
[3149]	658	LogProgress $progress $noof_lines
[861]	659	incoming=`ReadLine`
	660	done
[747]	661	fi
[3522]	662	echo -en "$DONE\nINFO: Making complete dependency list"
[747]	663
	664	tr -s '/' '/' < $tempfile \| sort -u > $tempfile.new
	665	mv -f $tempfile.new $tempfile
	666	> $outfile.pre
	667	progress=0
	668	noof_lines=`cat $tempfile \| wc -l`
[2963]	669	LogFile "---------------------------------"
	670	LogFile "List of dependencies: "
	671	LogFile "---------------------------------"
[747]	672	for fname in `cat $tempfile` ; do
[1876]	673	echo "$fname" \| tee -a $LOGFILE >> $outfile.pre
	674	LocateDeps $fname \| tee -a $LOGFILE >> $outfile.pre
[925]	675	progress=$(($progress+1))
[3149]	676	LogProgress $progress $noof_lines
[747]	677	done
[1684]	678	if [ _"$MONDO_SHARE" != _"" ]; then
[925]	679	mkdir -p $bigdir/tmp
[3172]	680	mkdir -p $bigdir/usr/bin
[940]	681	if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
[3149]	682	LogAll "\nINFO: Incorporating post-nuke tarball"
[3522]	683	(cd "$bigdir" ; tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log)
[747]	684	fi
[963]	685	if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
[925]	686	LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
	687	else
[3565]	688	LogAll "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
	689	LogAll " I bet you've got a spare copy of Mondo or Mindi floating around on your system."
	690	LogAll " If Mindi was called by Mondo then send a bug report."
	691	LogAll " It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
	692	LogAll " Finally, run Mindi again."
[925]	693	Die "Odd."
	694	fi
[3565]	695	cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE \|\| LogAll "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
[3270]	696	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3149]	697	LogAll "\nINFO: Incorporating Network-related settings"
[3278]	698	for r in NETFS-* ; do
[963]	699	cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE \|\| Die "Cannot copy $r - did you run out of disk space?"
[2963]	700	LogFile "INFO: Copying $r to ramdisk"
[925]	701	done
	702	fi
[747]	703	fi
[925]	704	tr ' ' '\n' < $outfile.pre \| tr -s '/' '/' \| grep -Fvx "" \| sort -u \| grep -Ev "/libX11\|/libXext\|/libXi\|/libgtk\|/libgdk" > $outfile
[747]	705	rm -f $tempfile $outfile.pre
	706	[ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" \|\| echo "\nFailed."
	707	return $res
	708	}
	709
	710
	711	GenerateListForFile() {
	712	local files_found loc fname incoming i res
	713	incoming="$1"
	714	files_found=""
	715	res=0
	716
	717	for fname in $incoming ; do
	718	files_found="$files_found `LocateFile $fname`"
	719	done
	720
	721	echo "$files_found" \| tr ' ' '\n' \| sort -u \| tr '\n' ' '
	722	}
	723
	724
	725	# Returns all disk devices which are part of a raid array
	726	GetAllRaidMembers() {
	727	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]device/ if(\$2) {print \$2}" < /etc/raidtab
	728	}
	729
	730
	731	GetFileSizeList() {
	732	local i
	733	for i in `find $1 -type d -o -print` ; do
	734	du -sk $i
	735	done
	736	}
	737
	738
[1230]	739	# Check kernel filesystem capabilites for accessing initrd image
[2429]	740	# Could be ext2 FS (old mode) or initramfs (new mode)
[1230]	741	#
	742	# Interface definition:
	743	# param #1: absolute path to kernel image
	744	GetInitrdFilesystemToUse() {
	745
	746	# interface test: make sure we have one parameter
	747	if [ $# -ne 1 ]; then
	748	Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
	749	fi
	750
	751	# interface parameters
	752	local lvKernelImage=$1
	753
	754	# local constants (filesystem magic strings)
	755	local lcMagicCramfs="<3>cramfs: wrong magic"
[2047]	756	local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
[2390]	757	local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
[3353]	758	local lcMagicInitfs="<6>checking if image is initramfs...\|[<]6[>]Unpacking initramfs...\|[<]6[>]Trying to unpack rootfs image as initramfs"
[1230]	759
	760	# local variables
	761	local lvOffset
	762	local lvScanRes
	763	local lvUseFilesystem
	764
	765	# say where we are.
[3111]	766	LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
[1230]	767
	768	# verify that file exists
	769	[ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
	770
[3111]	771	# Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
[1730]	772	file $lvKernelImage 2>&1 \| grep -q gzip
[1566]	773	if [ $? -eq 0 ]; then
[3111]	774	LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
	775	lvScanRes=`gzip -cd $lvKernelImage \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
	776	else
	777	LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
	778	# kernel is x86 boot sector in RHEL3/4 with embedded gzip content
	779	# get offet of gzip magic "1f8b0800" in file (for these older kernels)
	780	lvOffset=`od -vA n -t x1 $lvKernelImage \| tr -d '[:space:]' \| awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
	781	if [ $lvOffset -eq 0 ]; then
	782	LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
	783	lvScanRes=$lcMagicInitfs
[2393]	784	else
[3111]	785	lvOffset=`expr $lvOffset / 2`
	786	LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
	787	# scan again kernel image
	788	lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
[2393]	789	fi
[3111]	790	fi
[2393]	791
[3111]	792	# determine which filesystem to use for initrd image: ext2\|3fs, gzip'ed cpio (initramfs) or cramfs
	793	if [ `echo $lvScanRes \| grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
	794	lvUseFilesystem="ext2fs"
	795	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
	796	lvUseFilesystem="ext3fs"
	797	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
	798	lvUseFilesystem="initramfs"
	799	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
	800	lvUseFilesystem="cramfs"
[2429]	801	else
[3111]	802	# In that case, we are most probably after 2.6.30 and use the supported initramfs
[3181]	803	LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
	804	LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
	805	LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep initramfs"
[1230]	806	lvUseFilesystem="initramfs"
	807	fi
[3111]	808
[1230]	809	# say what we are using
[3111]	810	LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
[1230]	811
	812	# return file system to use
	813	echo "$lvUseFilesystem"
	814
	815	}
	816
[747]	817	# Searches members of raid device
	818	# $1: raid device (/dev/md...)
	819	GetRaidDevMembers() {
[2917]	820	if [ ! -f /etc/raidtab ]; then
	821	return
	822	fi
[747]	823	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
	824	}
	825
	826
	827	ListAllPartitions() {
	828	local res currline partition all_partitions ap_orig remaining i j
	829
[2070]	830	grep -Evx " #.\| none." $MY_FSTAB \| $AWK '/^\/dev\/[imhs]d\|\|^LABEL=\/\|^UUID=/ && !/\/fdd\|\/cdr\|\/zip\|\/floppy/ {print $1}'
[747]	831	[ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
[1824]	832	if [ -e "/vmfs/volumes" ]; then
	833	# For VMWare ESX 3 get the device names of these volumes
[2431]	834	vdf -P \| grep -E '/vmfs/volumes' \| $AWK '{print $1}'
[1824]	835	fi
[747]	836	return
	837	}
	838
	839
	840	ListKernelModulePaths() {
[2583]	841	local module_list module fname r kern
[1399]	842	module_list="$MODULES"
[1230]	843	# Remove unwanted modules from list
	844	for i in $DENY_MODS; do
	845	module_list=`echo ${module_list} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
	846	done
[747]	847	###
	848	### Sq-Modification ... Use kernelname for module search path if specified
	849	###
[3231]	850	if [ "${kernelname}" != "" ]
[747]	851	then
	852	kern=${kernelname}
	853	else
[2292]	854	kern="$KERVERRUN"
[747]	855	fi
[2292]	856	export KERVER=$kern
[747]	857	###
	858	### Sq-Mod End
	859	###
[3310]	860	# Get rid of duplicates
	861	for module in `echo $module_list \| tr ' ' '\n' \| sort -u` ; do
[747]	862	r=`find /lib/modules/$kern -type f \| grep "/${module}\..*o" \| tail -n1`
[2471]	863	if [ -z "$r" ]; then
	864	if [ "`echo "$MODULES" \| grep -w $module`" ]; then
	865	r="[live module file not found]"
	866	else
	867	r="[extra module file not found]"
	868	fi
[2583]	869	else
	870	[ -f "$r" ] && echo "$r"
[2471]	871	fi
[2963]	872	LogFile "INFO: module $module --> $r"
[747]	873	done
	874	find /lib/modules/$kern/modules.* -type f 2> /dev/null
	875	}
	876
[1784]	877	#
	878	# Critical function which computes all dependencies (dyn. lib.)
	879	# for a list of binaries
	880	#
[747]	881	LocateDeps() {
	882	local incoming fname deps
[1724]	883	incoming="$*"
[3231]	884	deps=""
	885
[747]	886	for fname in $incoming ; do
	887	if [ ! -e "$fname" ] ; then
[2995]	888	LogFile "WARNING: $fname does not exist; cannot be LDD'd."
[747]	889	if echo $fname \| grep lvm &> /dev/null ; then
[2963]	890	LogFile " This warning only affects you if you are using LVM."
[1399]	891	if echo "$MODULES" \| grep lvm &> /dev/null ; then
[3231]	892	LogFile " I think you are, so please take heed!"
[747]	893	else
[3231]	894	LogFile " I don't think you are, so don't worry about it."
[747]	895	fi
	896	fi
	897	else
[3231]	898	deps="$deps $fname"
[747]	899	fi
	900	done
[3231]	901	mr-read-all-link `mr-process-ldd $deps \| sort -u` \| sort -u
[747]	902	}
	903
[925]	904
[747]	905	LocateFile() {
[3231]	906	local i j path fname_to_find location output resolved tmp stub cache_id loclist
[747]	907	fname_to_find="$1"
[1526]	908	# It's an absolute path
[3231]	909	j=`echo "$fname_to_find" \| cut -c1`
	910	if [ _"$j" = _"/" ]; then
	911	dn=`dirname $fname_to_find`
	912	# We suppose that the link is already included, just add the new file
	913	if [ -h "$dn" ]; then
	914	newdn=`readlink -f $dn`
	915	bn=`basename $fname_to_find`
	916	output="$newdn/$bn"
	917	else
	918	output="$fname_to_find"
	919	fi
[860]	920	if [ -h "$output" ] ; then
[3231]	921	output="`mr-read-all-link $output` $output"
[860]	922	fi
[859]	923	echo "$output"
	924	return 0
[747]	925	fi
[1526]	926	# It's not an absolute path
[747]	927	output=""
[1526]	928	for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
	929	#for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
	930	[ -h "$path" ] && continue
	931	[ ! -e "$path/$fname_to_find" ] && continue
	932	output="$path/$fname_to_find $output"
	933	if [ -h "$path/$fname_to_find" ] ; then
[3231]	934	output="`mr-read-all-link $path/$fname_to_find` $output"
[1526]	935	fi
[747]	936	done
	937	if [ "$output" = "" ] ; then
[860]	938	return 1
[747]	939	fi
	940	echo "$output"
	941	return 0
	942	}
	943
[3149]	944	LogProgress() {
[3293]	945	local i progress modres noof_lines title
[3149]	946
	947	progress=$1
	948	noof_lines=$2
[3293]	949	title=$3
[747]	950
[3149]	951	i=$(($progress*100))
	952	if [ $noof_lines -ne 0 ]; then
	953	i=$(($i/$noof_lines))
	954	else
	955	i=0
	956	fi
[3293]	957
	958	if [ _"$MONDO_SHARE" != _"" ]; then
	959	echo "$title $i%"
	960	else
	961	echo -en "\r\t\t\t\t\t\t\t\t"
	962	echo -en "$i"
	963	echo -en "%"
	964	modres=$(($progress%4))
	965	[ "$modres" -eq "0" ] && echo -en "\t/"
	966	[ "$modres" -eq "1" ] && echo -en "\t-"
	967	[ "$modres" -eq "2" ] && echo -en "\t\\"
	968	[ "$modres" -eq "3" ] && echo -en "\t\|"
	969	fi
[3149]	970	}
	971
[3522]	972	# Called by MakeBootInitFile, to make /tmp/$MRCFG
[747]	973	MakeMondoConfigFile() {
	974	local outfile use_lzo use_comp use_star
	975	outfile=$1
	976	> $outfile
	977	[ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
	978	[ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
[1698]	979	[ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
[747]	980	[ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
	981	[ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
	982	[ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
	983	use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
[998]	984	use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
[3149]	985	use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
[747]	986	use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
	987	use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
	988	echo "use-lzo $use_lzo" >> $outfile
[998]	989	echo "use-gzip $use_gzip" >> $outfile
[747]	990	echo "use-star $use_star" >> $outfile
[3149]	991	echo "use-lzma $use_lzma" >> $outfile
[747]	992	echo "use-comp $use_comp" >> $outfile
[3397]	993	echo "boot-type $BOOT_TYPE" >> $outfile
[747]	994	echo "datestamp `date`" >> $outfile
	995	[ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
[940]	996	AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
	997	AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
	998	AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
[3278]	999	AddFileToCfgIfExists $MINDI_TMP/ISO-DIR iso-dir $outfile
[940]	1000	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
	1001	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
[3278]	1002	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER bootloader.ver $outfile
[940]	1003	AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
	1004	AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
	1005	AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
[3278]	1006	AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
	1007	AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
	1008	AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
	1009
[3270]	1010	# Deal with network configuration in a portable way
	1011	if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
	1012	mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
	1013	fi
[747]	1014	}
	1015
[2618]	1016	# Get PV's for an LV
	1017	GetPVsForLV() {
[3368]	1018	if [ -n "$1" ]; then
	1019	vg=`$LVMCMD lvdisplay $1 2>/dev/null \|awk '/VG Name/{print $NF;exit}'`
	1020	if [ -z "$vg" ]; then
	1021	return
	1022	fi
	1023	$LVMCMD vgdisplay -v $vg 2>/dev/null \| awk '/PV Name/{print $NF}'
	1024	fi
[2618]	1025	}
[747]	1026
[2618]	1027
[747]	1028	MakeMountlist() {
[2907]	1029	local mountlist all_partitions current_partition \
[747]	1030	partition_size partition_format outstring partition_number \
	1031	partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
[2013]	1032	absolute_partition old_partition_fmt current_lvolume uname skip
[747]	1033
[3149]	1034	LogFile "------------------------------------"
[3522]	1035	LogFile "INFO: Your raw fstab file looks like this:"
[2963]	1036	LogFile "------------------------------------"
[747]	1037	cat $MY_FSTAB >> $LOGFILE
[3149]	1038	LogAll "-----------------------------------"
[3522]	1039	LogAll "INFO: Your mountlist will look like this:"
[3149]	1040	LogAll "-----------------------------------"
[747]	1041
[2907]	1042	# mountlist(OUT)
[747]	1043	mountlist=$1
	1044
	1045	# NB: partition = device
	1046	# NB: mountpt = where the device is mounted
	1047
	1048	[ -e "$MY_FSTAB" ] \|\| Die "Cannot find your fstab file ($MY_FSTAB)"
	1049
[3565]	1050	[ "$mountlist" != "" ] && [ "$mountlist" != "/" ] && rm -Rf $mountlist
[747]	1051	> $mountlist
	1052	all_partitions=""
	1053
	1054	if [ $LVM != "false" ]; then
[3499]	1055	LogFile "INFO: Analyzing LVM..."
[968]	1056	$MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
[971]	1057	if [ $? -ne 0 ]; then
[963]	1058	LVM="false"
	1059	fi
[2536]	1060	# Excluded LVs and GVs are not reported here
[2424]	1061	all_partitions=`cat $MINDI_TMP/lvm.res \| grep -F ">>>" \| cut -d' ' -f2-`
[747]	1062	fi
	1063	all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
	1064	for i in $IMAGE_DEVS ; do
	1065	mount \| grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
	1066	done
	1067	[ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" \| tr ' ' '\n' \| sort -u \| tr '\n ' ' '`"
[3149]	1068	printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID \| tee -a $LOGFILE
	1069	printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------ ------- ---------- \| tee -a $LOGFILE
[3028]	1070	useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
[747]	1071	for c_p in $all_partitions ; do
[2917]	1072	# Skip fd/cd devices, network FS, cifs
[2452]	1073	[ "`echo "$useless_dev" \| grep -F "$c_p"`" != "" ] \|\| [ "`echo "$c_p" \| grep ":"`" != "" ] \|\| [ "`echo "$c_p" \| grep -E "^//"`" != "" ]&& continue
[747]	1074	[ "`echo "$c_p" \| grep -x "/dev/cdroms.*"`" ] && continue
	1075	if [ -h "$c_p" ] && [ "`echo "$c_p" \| grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/md"`" = "" ] ; then
[861]	1076	current_partition=`readlink -f $c_p`
[3046]	1077	if [ "`echo "$current_partition" \| grep -F "/dev/mapper"`" != "" ]; then
	1078	current_partition="$c_p"
	1079	elif [ "`echo $current_partition \| grep -E '^/dev/dm-'`" ]; then
[3059]	1080	# For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
[3066]	1081	current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
[3046]	1082	fi
[747]	1083	[ "`echo "$useless_dev" \| grep -F "$current_partition"`" ] && continue
	1084	else
	1085	current_partition="$c_p"
	1086	fi
	1087	[ "$c_p" = "none" ] && continue
	1088	redhat_label=""
[1831]	1089	label=""
[957]	1090	uuid=""
[861]	1091	absolute_partition=`readlink -f $c_p`
[2965]	1092	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$current_partition" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[747]	1093
[1986]	1094	# set default in case we dont't find it
	1095	str_to_find_fmt_with=$current_partition
	1096
[747]	1097	# This part tries to retrieve the correct device from a LABEL line in /etc/fstab
	1098	# current_partition contains only first column of /etc/fstab
[2965]	1099	if [ "`echo "$current_partition" \| grep -i "LABEL="`" != "" ]; then
[980]	1100	redhat_label=`echo "$current_partition" \| cut -d'=' -f2`
[747]	1101	actual_dev=""
[853]	1102
	1103	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1104	if [ -x "/sbin/findfs" ]; then
[2847]	1105	actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
[853]	1106	fi
[747]	1107
[853]	1108	# 2nd try : blkid, the good way for all LABEL except swap
	1109	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[2965]	1110	actual_dev=`/sbin/blkid \| grep "$redhat_label" \| grep LABEL= \| cut -d':' -f1`
[747]	1111	# For LVM FS it will give a /dev/dm-# which should then be converted
[748]	1112	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1113	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1114	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[747]	1115	for dev in `ls /dev/mapper/*`; do
[963]	1116	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1117	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[747]	1118	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1119	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[747]	1120	break
	1121	fi
	1122	done
	1123	fi
	1124	fi
	1125
[853]	1126	# 3rd try, which works on a standard partition (ext2/3), but not on swap
[747]	1127	# For LVM gives a /dev/mapper entry
	1128	if [ "x$actual_dev" = "x" ]; then
[2965]	1129	actual_dev=`/bin/mount -l \| grep "\[$redhat_label\]" \| cut -d' ' -f1`
[747]	1130	fi
	1131
[853]	1132	# 4th try, with vol_id
[747]	1133	# SWAP only
	1134	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[2965]	1135	list_swaps=`cat /proc/swaps \| grep "/dev/" \| $AWK '{ print $1 }' `
[747]	1136	for dev_swap in $list_swaps ; do
[2965]	1137	dev_exists=`/sbin/vol_id $dev_swap \| grep "$redhat_label"`
[747]	1138	if [ "x$dev_exists" != "x" ]; then
	1139	actual_dev=$dev_swap
	1140	break;
	1141	fi
	1142	done
	1143	fi
	1144
[853]	1145	# 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
[789]	1146	# LABEL=SW-cciss/c0d0p3 (RDP)
[853]	1147	# or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
[747]	1148	# SWAP only
[2965]	1149	if [ "x$actual_dev" = "x" -a _"`echo $current_partition \| grep -iE 'LABEL=SWAP\|LABEL=SW-'`" != _"" ]; then
[2013]	1150	skip=""
[2292]	1151	uname=$KERVERRUN
[2013]	1152	[ "`echo $uname \| grep "2.4.[0-9]"`" != "" ] && skip=16
	1153	# 2.6.12 needs 16 (FC3)
	1154	[ "`echo $uname \| grep "2.6.[0-1]"`" != "" ] && skip=16
	1155	# 2.6.19 and upper needs 1052
	1156	[ "`echo $uname \| grep "2.6.19"`" != "" ] && skip=1052
	1157	[ "`echo $uname \| grep "2.6.[2-9]"`" != "" ] && skip=1052
[2892]	1158	[ "`echo $uname \| grep "3.[0-9].[0-9]"`" != "" ] && skip=1052
[2013]	1159	if [ $skip = "" ]; then
	1160	Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
	1161	fi
[853]	1162	for try_dev in `tail +2 /proc/swaps \| cut -d' ' -f1`
	1163	do
	1164	# Location of the swap label for kernel 2.6
[2013]	1165	try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
[853]	1166	if [ "x$try_dev_label" = "x$redhat_label" ]; then
[855]	1167	actual_dev=$try_dev
[853]	1168	fi
	1169	done
[747]	1170	fi
[1008]	1171
	1172	# Check if one of all those tries has known success
	1173	if [ "x$actual_dev" != "x" ]; then
	1174	current_partition=$actual_dev
	1175	else
[1885]	1176	Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
[1008]	1177	fi
[957]	1178	# This part tries to retrieve the correct device from a UUID line in /etc/fstab
	1179	# current_partition contains only first column of /etc/fstab
[2965]	1180	elif [ "`echo "$current_partition" \| grep -i "UUID="`" != "" ]; then
[980]	1181	uuid=`echo "$current_partition" \| cut -d'=' -f2`
[957]	1182	actual_dev=""
	1183
	1184	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1185	if [ -x "/sbin/findfs" ]; then
	1186	actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
	1187	fi
	1188
[1531]	1189	# 2nd try : blkid, the good way for all UUID except swap
[957]	1190	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[2965]	1191	actual_dev=`/sbin/blkid \| grep "$uuid" \| grep UUID= \| cut -d':' -f1`
[957]	1192	# For LVM FS it will give a /dev/dm-# which should then be converted
	1193	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1194	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1195	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[957]	1196	for dev in `ls /dev/mapper/*`; do
[963]	1197	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1198	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[957]	1199	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1200	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[957]	1201	break
	1202	fi
	1203	done
	1204	fi
	1205	fi
	1206
	1207	# 3th try, with vol_id
	1208	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[2965]	1209	list_dev=`mount \| grep -E '^/' \| $AWK '{ print $1 }' `
[957]	1210	for dev in $list_dev ; do
[2965]	1211	dev_exists=`/sbin/vol_id $dev \| grep "$uuid"`
[957]	1212	if [ "x$dev_exists" != "x" ]; then
	1213	actual_dev=$dev
	1214	break;
	1215	fi
	1216	done
	1217	fi
	1218
[1531]	1219	# 4th try, with dumpuuid (VMWare only ?) for swap
	1220	if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
[2965]	1221	list_dev=`cat /proc/swaps \| grep -E '^/' \| $AWK '{ print $1 }' `
[1531]	1222	for dev in $list_dev ; do
[2965]	1223	dev_exists=`/sbin/dumpuuid $dev \| grep "$uuid"`
[1531]	1224	if [ "x$dev_exists" != "x" ]; then
	1225	actual_dev=$dev
	1226	break;
	1227	fi
	1228	done
	1229	fi
	1230
[747]	1231	# Check if one of all those tries has known success
	1232	if [ "x$actual_dev" != "x" ]; then
	1233	current_partition=$actual_dev
	1234	else
[2069]	1235	Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs\|blkid\|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
[747]	1236	fi
	1237	else
[1863]	1238	# Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
	1239	# they use symlinks in fstab unrelated to what is shown in mount !
	1240	if [ _"$partition_mountpt" = _"" ]; then
[1986]	1241	# set default in case we dont't find it
[2965]	1242	for tmpp in `tr -s '\t' ' ' < $MY_FSTAB \| grep -Ev "^#" \| $AWK '{print $1}'`; do
[3084]	1243	if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
[1863]	1244	str_to_find_fmt_with=$tmpp
[2965]	1245	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$tmpp" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[1864]	1246	break;
[1863]	1247	fi
	1248	done
	1249	fi
[747]	1250	fi
	1251
[3084]	1252	# Detects noauto partitions not mounted and exclude them
	1253	partition_option=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$str_to_find_fmt_with" \| grep -vx " #." \| $AWK '{print $4}' \| head -n1`
	1254	if [ "`echo "$partition_option" \| grep -i noauto`" != "" ] && [ "`mount \| grep -w "$partition_mountpt"`" = "" ] ; then
	1255	LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
	1256	continue
	1257	fi
	1258	# Detects bind partitions and exclude them
	1259	if [ "`echo "$partition_option" \| grep -iw bind`" != "" ]; then
	1260	LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
	1261	continue
	1262	fi
	1263
[2566]	1264	# Look for devices which have to be excluded
	1265	skip=0
	1266	if [ "$MINDI_EXCLUDE_DEVS" ] ; then
[2568]	1267	l=""
[3231]	1268	list_of_devices="`mr-read-all-link $current_partition`"
[2568]	1269	for d in $list_of_devices; do
[2579]	1270	l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
[2568]	1271	done
[2618]	1272
	1273	# Remove PVs from LVs excluded
	1274	l="$l `GetPVsForLV $current_partition`"
	1275
	1276	# We want a single unique list
[3522]	1277	list_of_devices="`echo $l \| tr ' ' '\n' \| sort -u`"
[2618]	1278
[2854]	1279	for d in `echo $MINDI_EXCLUDE_DEVS \| sed 's/\|/ /g'`; do
[2568]	1280	if [ "`echo " $list_of_devices " \| grep " $d"`" != "" ]; then
[2963]	1281	LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
[2566]	1282	skip=1
	1283	continue
	1284	fi
	1285	done
	1286	fi
	1287	if [ $skip -eq 1 ]; then
	1288	continue
	1289	fi
	1290
[747]	1291	partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
[3028]	1292	# Detects iso9660 ISO images and exclude them
	1293	if [ "`echo "$partition_format" \| grep -iw iso9660`" != "" ]; then
[3064]	1294	LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
[3028]	1295	continue
	1296	fi
[747]	1297	# Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
	1298	# for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
	1299	# the former is then a link to the latter, so we test whether
	1300	# $current_partition is actually such a link or not and set
[755]	1301	# $current_lvolume accordingly. On Debian you may find more than one answer
	1302	# so we remove the one corresponding to /dev/.static
	1303	# On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
	1304	# principle is the same and we need to find the link to it as well.
	1305	# Note that $current_lvolume may well be an
[747]	1306	# ordinary device. It is just to make sure that we feed the right value
	1307	# into any of the LVM tools if possible.
	1308
[3064]	1309	current_lvolume="$current_partition"
[763]	1310	if [ $LVM = "v2" ] && [ "`echo $current_partition \| grep -E '^/dev/mapper/'`" ]; then
[755]	1311	# .static dir are a Debian specificity
[763]	1312	current_lvolume="`find /dev -lname "$current_partition" \| grep -Ev '^/dev/\.static/'`"
[755]	1313	echo $current_lvolume \| grep -q ' '
[784]	1314	if [ $? -eq 0 ]; then
[2963]	1315	LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
[755]	1316	fi
[2072]	1317	# if it's not found, it may well be a real device such as a multipath one
	1318	# /dev/mapper/mpath... Thus we revert the situation so that next test succeed
	1319	if [ _"$current_lvolume" = _"" ]; then
	1320	current_lvolume="$current_partition"
	1321	fi
[747]	1322	fi
	1323	#
	1324	# End of LVM device style variation code (other than $current_lvolume).
	1325
[745]	1326	if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
	1327	# Size computed via LVM not directly
[747]	1328	partition_size="lvm"
	1329	else
	1330	[ "`echo "$current_partition" \| grep "[0-9]"`" = "" ] && continue
	1331	[ "`echo "$current_partition" \| grep -c "^/"`" -ne "1" ] && continue
	1332	if [ "$partition_format" = "swap" ] \|\| [ "$partition_mountpt" = "swap" ] ; then
[2947]	1333	# Skip swap files
	1334	[ "`echo "$current_partition" \| grep -E "^/dev"`" = "" ] && continue
[2919]	1335	partition_size=`grep -Fv "Priority" /proc/swaps \| tr -s '\t' ' ' \| grep -F "$current_partition " \| $AWK '{print $3}'`
[747]	1336	[ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
[3368]	1337	[ "$partition_format" != "swap" ] && partition_format="swap"
[747]	1338	if [ "$partition_size" = "" ] ; then
[3368]	1339	totalsize=0
	1340	items=0
	1341	for i in `tr -s ' ' '\t' < /proc/swaps \| grep -Fv "Filename" \| cut -f3` ; do
[747]	1342	totalsize=$(($totalsize+$i))
	1343	items=$(($items+1))
[3368]	1344	done
	1345	[ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) \|\| partition_size=0
	1346	[ "$partition_size" -lt "125000" ] && partition_size=125000
	1347	LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
[747]	1348	fi
[2947]	1349	else
	1350	partition_size=`SizeOfPartition $current_partition`
[747]	1351	fi
	1352	fi
	1353	[ "$partition_mountpt" = "swap" ] && partition_format="swap"
	1354	[ "$partition_format" = "swap" ] && partition_mountpt="swap"
	1355	if [ "$partition_mountpt" = "" ] ; then
	1356	if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
	1357	if [ "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
	1358	partition_mountpt="raid"
	1359	partition_format="raid"
	1360	else
	1361	partition_mountpt="lvm"
	1362	partition_format="lvm"
	1363	fi
	1364	fi
	1365	fi
	1366	psz=$partition_size
[2963]	1367	LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
[747]	1368	[ "$psz" != "lvm" ] && psz=$(($psz/1024))
	1369	if [ "`echo " $IMAGE_DEVS " \| grep -F " $current_partition "`" != "" ] ; then
	1370	partition_mountpt="image"
	1371	old_partition_fmt=$partition_format
	1372	partition_format="`$FDISK -l 2>> $LOGFILE \| tr '*' ' ' \| tr '+' ' ' \| tr -s ' ' '\t' \| grep -w "$absolute_partition" \| cut -f5`"
	1373	partition_size=$(($partition_size+1)); # just in case
	1374	if [ "$partition_format" = "Linux" ] ; then
[2963]	1375	LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
	1376	LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
[747]	1377	partition_format=$old_partition_fmt
	1378	fi
	1379	fi
[2566]	1380
[747]	1381	if [ ! "$partition_mountpt" ] ; then
[2963]	1382	LogFile "------- $FDISK -l $qq log ------------"
[1883]	1383	for qq in "" `find /dev/ida/cd ! -name 'p' 2> /dev/null`; do
[747]	1384	partition_format=`$FDISK -l $qq 2>> $LOGFILE \| grep -w "$c_p" \| sed 's/12/\|/' \| tr -s '\t' ' ' \| cut -d'\|' -f2 \| cut -d' ' -f2-9`
	1385	[ "$partition_format" ] && break
	1386	done
[2963]	1387	LogFile "------- $FDISK log end ------------"
[747]	1388	if [ "$partition_format" = "Compaq diagnostics" ] ; then
	1389	partition_format="compaq"
	1390	elif [ ! "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
[3149]	1391	LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
[747]	1392	continue
	1393	fi
	1394	fi
[1755]	1395	if [ "$redhat_label" ]; then
	1396	label="$redhat_label"
[1756]	1397	elif [ "$uuid" ]; then
[1755]	1398	label="$uuid"
	1399	fi
[3330]	1400
	1401	# On RHEL 7 they use UUID concretely, even when not mentioned in fstab
	1402	# in order to mount the root part e.g. in grub.
	1403	# One way to solve this is to add the UUID now, if there wasn't one so it's
	1404	# restored correctly
	1405	if [ _"$label" = _"" ]; then
	1406	label=`blkid $current_partition \| perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
	1407	fi
	1408
[747]	1409	partition_format="`echo "$partition_format" \| cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
[963]	1410	[ "$partition_format" = "auto" ] && partition_format="`mount \| grep -w $current_partition \| $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
[3149]	1411	unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
[747]	1412	if [ "$current_partition" = "" ] ; then
[2963]	1413	LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
[747]	1414	elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
	1415	if [ "`grep -F device /etc/raidtab 2>/dev/null \| grep -F $current_partition`" ] ; then
	1416	partition_mountpt=raid
	1417	partition_format=raid
[3149]	1418	printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
[1755]	1419	printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1420	else
[2963]	1421	LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
[747]	1422	fi
	1423	elif [ "$partition_format" = "" ] ; then
[2963]	1424	LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
[747]	1425	elif [ "$partition_size" = "" ] ; then
[2963]	1426	LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
[747]	1427	elif [ "$partition_mountpt" = "/proc" ] \|\| [ "$partition_mountpt" = "/dev/pts" ] ; then
	1428	continue
	1429	else
	1430	if [ "$partition_format" = "dos" ] \|\| [ "$partition_format" = "msdos" ] ; then
[3522]	1431	LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
[747]	1432	partition_format="vfat"
	1433	fi
[3149]	1434	printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
[1755]	1435	printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1436	fi
	1437	done
[3149]	1438	LogAll "-----------------------------------"
[747]	1439	}
	1440
[2432]	1441	CheckMountlist() {
	1442	local file=$1
	1443	# Coherency verification
[2529]	1444	ML01=`cat $file \| wc -l`
[2995]	1445	ML02=`grep -vE ' lvm \| raid \| swap ' $file \| wc -l`
[2432]	1446	ML1=`$AWK '{print $1}' $file \| sort -u \| wc -l`
[3024]	1447	ML2=`grep -vE ' lvm \| raid \| swap ' $file \| $AWK '{print $2}' \| sort -u \| wc -l`
[2529]	1448	if [ "$ML01" -ne "$ML1" ]; then
[2963]	1449	LogFile "--------------------------------------------"
[3081]	1450	LogAll "WARNING: Duplicate device entry in mountlist"
[2963]	1451	LogFile "--------------------------------------------"
[2432]	1452	fi
[2529]	1453	if [ "$ML02" -ne "$ML2" ]; then
[2963]	1454	LogFile "--------------------------------------------"
	1455	LogAll "WARNING: Duplicate mountpoint entry in mountlist"
	1456	LogFile "------------------------------------------------"
[2432]	1457	fi
	1458	}
[747]	1459
[3476]	1460
[3522]	1461	MakeISOErrors() {
[3421]	1462
[3522]	1463	LogFile "----------- $ISO_CMD's errors --------------"
	1464	LogAll "$ISO_CMD returned the following errors:"
	1465	cat $MINDI_TMP/mkisofs.log \| tee -a $LOGFILE
	1466	LogAll "ERROR: Failed to create ISO image."
	1467	}
[3499]	1468
[3532]	1469	MakeISO() {
	1470
[3535]	1471	LogAll "INFO: Invoking $CMD ."
[3532]	1472	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
	1473	if [ $? -ne 0 ] ; then
	1474	if [ "$BOOT_TYPE" = "UEFI" ]; then
	1475	CMD=`echo $CMD \| perl -p -e 's\|--efi-boot \|-eltorito-platform 0xEF -eltorito-boot \|; s\|-efi-boot \|-eltorito-platform 0xEF -eltorito-boot \|;'`
	1476	LogAll "INFO: Invoking instead $CMD"
	1477	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
	1478	if [ $? -eq 0 ] ; then
	1479	LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
	1480	else
	1481	MakeISOErrors
	1482	fi
	1483	else
	1484	MakeISOErrors
	1485	fi
	1486	else
	1487	LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
	1488	fi
	1489	rm -f $MINDI_TMP/mkisofs.log
	1490	}
	1491
[3522]	1492	MakeBootableDevice() {
[3499]	1493
[3522]	1494	local target tbc retval part size mount_opt
	1495
	1496	target="$1"
	1497
	1498	rm -Rf $MINDI_TMP/target
	1499	mkdir -p $MINDI_TMP/target/{images,archives,tmp}
	1500
	1501	LogAll "INFO: Copying $MINDI_CACHE/*.gz to $MINDI_TMP/target/images"
	1502	cp -f $MINDI_CACHE/*.gz $MINDI_TMP/target/images 2>> $LOGFILE \|\| LogAll "WARNING: MakeBootableDevice: Cannot copy files to $MINDI_TMP/target/images"
	1503	for i in memdisk memtest.bin memtest.img ; do
	1504	j=$MINDI_LIB/$i
	1505	k=$MINDI_TMP/target
	1506	if [ -e "$j" ] ; then
	1507	LogAll "INFO: Copying $j to $k"
	1508	cp -f $j $k 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $k"
	1509	cp -f $j $MINDI_TMP 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $MINDI_TMP"
	1510	if [ _"$MONDO_SHARE" != _"" ]; then
	1511	cp -f $j $MONDO_ROOT 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $MONDO_ROOT"
[3499]	1512	fi
[3522]	1513	fi
	1514	done
[3499]	1515
[3522]	1516	retval=0
	1517	LogAll "INFO: Copying $kernelpath to $MINDI_TMP/target/vmlinuz"
	1518	cp $kernelpath $MINDI_TMP/target/vmlinuz 2>> $LOGFILE
[3528]	1519	if [ $? -ne 0 ] ; then
[3522]	1520	LogAll "ERROR: Failed to copy $kernelpath $MINDI_TMP/target/"
	1521	retval=$(($retval+1))
	1522	fi
	1523	LogAll "INFO: Copying $MINDI_TMP/initrd.img to $MINDI_TMP/target/initrd.img"
	1524	cp $MINDI_TMP/initrd.img $MINDI_TMP/target/ 2>> $LOGFILE
[3528]	1525	if [ $? -ne 0 ] ; then
[3522]	1526	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MINDI_TMP/target/"
	1527	retval=$(($retval+1))
	1528	fi
[3421]	1529
[3522]	1530	# copy boot stuff now generated in PrepareDataDiskImage
	1531	if [ "$BOOT_TYPE" = "UEFI" ]; then
	1532	(cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
	1533	tbc="EFI"
[3528]	1534	# Also prepare a BIOS compatible boot
	1535	if [ "$target" = "ISO" ]; then
	1536	cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
	1537	fi
[3522]	1538	else
	1539	(cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
	1540	tbc="syslinux"
	1541	if [ -f "$MINDI_TMP/target/$tbc/syslinux.cfg" ]; then
	1542	LogFile "----------- syslinux's conf --------------"
	1543	cat $MINDI_TMP/target/$tbc/syslinux.cfg >> $LOGFILE
	1544	LogFile "------------------------------------------"
	1545	fi
	1546	if [ "$target" = "ISO" ]; then
	1547	cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
[3528]	1548	if [ $? -ne 0 ] ; then
[3522]	1549	LogAll "ERROR: Failed to copy $ISOLINUX to $MINDI_TMP/target/$tbc"
	1550	retval=$(($retval+1))
[3476]	1551	fi
[3522]	1552	fi
	1553	fi
[3476]	1554
[3522]	1555	if [ "$ARCH" != "ia64" ] ; then
	1556	if [ $KERNEL_IS_XEN = "yes" ]; then
	1557	FindMboot32Binary
	1558	cp $xenkernelpath $MINDI_TMP/target/xen.gz 2>> $LOGFILE
[3528]	1559	if [ $? -ne 0 ] ; then
[3522]	1560	LogAll "ERROR: Failed to copy $xenkernelpath to $MINDI_TMP/target/"
	1561	retval=$(($retval+1))
[1885]	1562	fi
[3522]	1563	cp $MBOOTC32 $MINDI_TMP/target/$tbc/mboot.c32 2>> $LOGFILE
[3528]	1564	if [ $? -ne 0 ] ; then
[3522]	1565	LogAll "ERROR: Failed to copy $MBOOTC32 to $MINDI_TMP/target/$tbc"
	1566	retval=$(($retval+1))
	1567	fi
[747]	1568	fi
[3522]	1569	fi
[3499]	1570
[3522]	1571	MakeMessageFile $MINDI_TMP/target/$tbc \| cut -c1-80 > $MINDI_TMP/target/$tbc/message.txt
	1572
	1573	if [ _"$MONDO_SHARE" != _"" ]; then
	1574	cp -rf $MINDI_TMP/target/$tbc $MONDO_ROOT 2>> $LOGFILE
[3528]	1575	if [ $? -ne 0 ] ; then
[3522]	1576	LogAll "ERROR: Failed to copy $MINDI_TMP/target/$tbc to $MONDO_ROOT"
	1577	LogAll " Please check the target directory."
	1578	retval=$(($retval+1))
	1579	fi
	1580	if [ $KERNEL_IS_XEN = "yes" ]; then
	1581	cp -f $MINDI_TMP/target/xen.gz $MONDO_ROOT 2>> $LOGFILE
[3528]	1582	if [ $? -ne 0 ] ; then
[3522]	1583	LogAll "ERROR: Failed to copy $MINDI_TMP/target/xen.gz to $MONDO_ROOT"
	1584	LogAll " Please check the target directory."
	1585	retval=$(($retval+1))
[3476]	1586	fi
[747]	1587	fi
[3522]	1588	cp -f $MONDO_SHARE/autorun $MINDI_TMP/target 2>> $LOGFILE
[3527]	1589	cp -f $MINDI_TMP/target/vmlinuz $MONDO_ROOT 2>> $LOGFILE
[3528]	1590	if [ $? -ne 0 ] ; then
[3527]	1591	LogAll "ERROR: Failed to copy $MINDI_TMP/vmlinuz to $MONDO_ROOT"
	1592	LogAll " Please check the target directory."
	1593	retval=$(($retval+1))
	1594	fi
	1595	cp -f $MINDI_TMP/target/initrd.img $MONDO_ROOT 2>> $LOGFILE
[3528]	1596	if [ $? -ne 0 ] ; then
[3527]	1597	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MONDO_ROOT"
	1598	LogAll " Please check the target directory."
	1599	retval=$(($retval+1))
	1600	fi
[3522]	1601	fi
[747]	1602
[3522]	1603	if [ -f "$MINDI_TMP/$MRCFG" ]; then
	1604	cp -f $MINDI_TMP/$MRCFG $MINDI_TMP/target/tmp
	1605	fi
[747]	1606
[3522]	1607	LogFile "----------- target dir content -----------"
	1608	LogFile "------------------------------------------"
	1609	ls -lR $MINDI_TMP/target >> $LOGFILE
	1610	LogFile "------------------------------------------"
	1611	LogFile "----------- target dir sizes -------------"
	1612	du -sk $MINDI_TMP/target/* >> $LOGFILE
	1613	LogFile "------------------------------------------"
[3476]	1614
[3522]	1615	if [ "$retval" -ne "0" ] ; then
	1616	LogFile "--------------------------------"
	1617	LogFile "INFO: Size of $MINDI_TMP/target:"
	1618	du -sk $MINDI_TMP/target/* >> $LOGFILE
	1619	LogFile "--------------------------------"
	1620	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
[3546]	1621	sync
[3522]	1622	umount $MINDI_TMP/target
	1623	LogAll "ERROR: Problems while creating boot media."
	1624	LogAll " Please unload some of your modules and try again."
	1625	Die " Try to increase EXTRA_SPACE in $MINDI_CONFIG"
	1626	fi
[3476]	1627
[3522]	1628	mkdir -p $MINDI_TMP/mpt
[1684]	1629
[3522]	1630	if [ "$target" = "USB" ]; then
	1631	LogAll "INFO: Transforming $USBDEVICE in a Bootable device"
	1632	LogAll "INFO: Checking $USBDEVICE"
[2924]	1633	$FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
[1684]	1634	if [ $? -ne 0 ]; then
[2963]	1635	LogAll "ERROR: Unable to access $USBDEVICE"
[3086]	1636	LogAll " Make sure your USB device is plugged in"
[2963]	1637	MindiExit -1
[1684]	1638	fi
[3149]	1639	# Some distro do auto mount at that point (Ubuntu)
[3522]	1640	LogAll "INFO: Unmounting $USBPART just in case"
[3546]	1641	sync
[1721]	1642	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[3419]	1643	if [ "$BOOT_TYPE" = "BIOS" ]; then
[3403]	1644	# If your key has no MBR it may cause an issue
	1645	# Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
	1646	if [ -r $MBRFILE ]; then
	1647	LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
[3522]	1648	dd if=$MBRFILE of=$USBDEVICE >> $LOGFILE 2>> $LOGFILE
[3403]	1649	else
	1650	LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
	1651	LogAll " on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
	1652	fi
[2855]	1653	fi
[3522]	1654	LogAll "INFO: Preparing $USBDEVICE"
[2851]	1655	cat > $MINDI_TMP/fdisk.txt << EOF
[2057]	1656	d
	1657	d
	1658	d
	1659	d
[1684]	1660	n
	1661	p
	1662	1
	1663
	1664
	1665	t
	1666	b
	1667	a
	1668	1
	1669	w
	1670	EOF
[2851]	1671	$FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
[1684]	1672	if [ $? -ne 0 ]; then
[2963]	1673	LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
[3086]	1674	LogAll " Make sure your USB device is plugged in"
[1684]	1675	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1676	MindiExit -1
	1677	fi
[2963]	1678	LogFile "fdisk build file"
	1679	LogFile "----------------"
[2851]	1680	cat $MINDI_TMP/fdisk.txt >> $LOGFILE
[2963]	1681	LogFile "----------------"
[2924]	1682	rm -f $MINDI_TMP/fdisk.txt
[3522]	1683	LogAll "INFO: The USB device $USBDEVICE now looks like this:"
[2190]	1684	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
[3006]	1685	# Calling kpartx in case devices were not created
[3033]	1686	if [ -x "/sbin/kpartx" ]; then
[3027]	1687	/sbin/kpartx -a $USBDEVICE
	1688	fi
[2461]	1689	# Some distro do auto mount at that point (Ubuntu)
[3522]	1690	LogAll "INFO: Unmounting $USBPART just in case again"
[3546]	1691	sync
[2461]	1692	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[3086]	1693	# Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
	1694	if [ "`which dmsetup`" != "" ]; then
[3368]	1695	block_id="`echo $USBPART \| sed 's/\/dev\///g'`"
	1696	if [[ "`dmsetup ls \| awk '{print $1}' \| grep $block_id`" != "" ]]; then
[3522]	1697	LogAll "INFO: Removing $block_id from device mapper."
[3368]	1698	sleep 1
	1699	dmsetup remove $block_id
	1700	fi
	1701	fi
[3522]	1702	part=$USBPART
	1703	mount_opt=""
	1704	else
	1705	# ISO image
	1706	part=$MINDI_TMP/mindi-bootroot.img
	1707	size=`du -sk $MINDI_TMP/target 2> /dev/null \| cut -f1`
	1708	# Adds 10 MB to allow for additional space
	1709	size=$(($size+10000))
	1710	LogAll "INFO: Creating a $size KB empty file for boot device of the ISO image"
	1711	dd if=/dev/zero of=$part bs=1k count=$size &> /dev/null \|\| Die "Cannot dd blank $part"
	1712	mount_opt="-o loop"
	1713	fi
	1714
	1715	LogAll "INFO: Creating a vfat filesystem on $part"
[3531]	1716
	1717	mkfs.vfat $part 2>&1 >> $LOGFILE
[3522]	1718	if [ $? -ne 0 ]; then
	1719	LogAll "ERROR: Unable to create a vfat filesystem on $part"
	1720	if [ "$target" = "USB" ]; then
	1721	LogAll " Make sure your USB device is plugged in and partitioned ($part must exist on it)"
[1684]	1722	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1723	fi
[3522]	1724	MindiExit -1
	1725	fi
[3532]	1726	if [ "$target" = "ISO" ]; then
	1727	if [ "$BOOT_TYPE" = "BIOS" ]; then
	1728	# syslinux should be run on a local file (doen't work through NFS Cf: #297)
	1729	# and run after the formating for versions > 6 it seems
	1730	syslinux $part >> $LOGFILE 2>> $LOGFILE
	1731	fi
	1732	fi
[3522]	1733	LogAll "INFO: Mounting $part on $MINDI_TMP/mpt"
	1734	mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
	1735	if [ $? -ne 0 ]; then
	1736	LogAll "ERROR: Unable to mount $part on $MINDI_TMP/mpt"
	1737	if [ "$target" = "USB" ]; then
	1738	LogAll " Make sure your USB device is plugged in, partitioned and formated ($part must exist on it)"
[1684]	1739	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1740	fi
[3522]	1741	MindiExit -1
	1742	fi
	1743
	1744	LogAll "INFO: Moving boot info on $MINDI_TMP/mpt"
	1745	mv $MINDI_TMP/target/* $MINDI_TMP/mpt
[3528]	1746	if [ $? -ne 0 ] ; then
[3522]	1747	LogFile "--------------------------------"
	1748	LogFile "INFO: Size of $MINDI_TMP/mpt:"
	1749	du -sk $MINDI_TMP/mpt/* >> $LOGFILE
	1750	LogFile "--------------------------------"
[3546]	1751	sync
[3522]	1752	umount $MINDI_TMP/mpt
	1753	LogAll "ERROR: Problems while creating boot media."
	1754	LogAll " Please unload some of your modules and try again."
	1755	Die " Try to increase EXTRA_SPACE in $MINDI_CONFIG"
	1756	fi
	1757
	1758	if [ "$target" = "ISO" ]; then
[3534]	1759	if [ "$ARCH" != "ia64" ]; then
	1760	ISO_OPT="$ISO_OPT -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
	1761	fi
[3522]	1762	# ISO
[3533]	1763	if [ "$ARCH" != "ia64" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
[3534]	1764	CMD="$ISO_CMD $ISO_OPT"
[3532]	1765	MakeISO
[3522]	1766	else
[3534]	1767	if [ "$ARCH" = "ia64" ]; then
	1768	CMD="$ISO_CMD $ISO_OPT -b images/mindi-bootroot.img -c images/boot.cat"
	1769	else
	1770	# UEFI
	1771	echo "$CMD" \| grep -q "xorriso"
	1772	if [ $? -eq 0 ]; then
	1773	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot --efi-boot images/mindi-bootroot.img -no-emul-boot"
	1774	else
	1775	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
	1776	fi
	1777	fi
[3522]	1778	fi
	1779	fi
	1780
[3546]	1781	# Avoids graphical tool to keep the FS mounted
	1782	sync
[3522]	1783	umount $MINDI_TMP/mpt \|\| Die "Unable to unmount $MINDI_TMP/mpt"
	1784
	1785	if [ "$target" = "ISO" ]; then
[3532]	1786	cp $part $MINDI_CACHE
[3533]	1787	if [ "$ARCH" = "ia64" ] \|\| [ "$BOOT_TYPE" = "UEFI" ]; then
[3535]	1788	# We just need the EFI dir and the boot image for this case
[3536]	1789	mkdir -p $MINDI_TMP/mpt2 $MINDI_TMP/mpt/images $MINDI_TMP/mpt/archives
[3535]	1790	mount -o loop $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt2 2>> $LOGFILE
	1791	# We need again the kernel+initrd at the root for UEFI boot at least
	1792	cp -a $MINDI_TMP/mpt2/EFI $MINDI_TMP/mpt2/vmlinuz $MINDI_TMP/mpt2/initrd.img $MINDI_TMP/mpt
	1793	# We need the boot image now and what mindi needs at restore time as well
	1794	cp -a $MINDI_TMP/mpt2/images/all.tar.gz $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt/images
[3546]	1795	# Avoids graphical tool to keep the FS mounted
	1796	sync
[3535]	1797	umount $MINDI_TMP/mpt2
	1798	LogFile "----------- target dir content -----------"
	1799	LogFile "------------------------------------------"
	1800	ls -lR $MINDI_TMP/mpt >> $LOGFILE
	1801	LogFile "------------------------------------------"
[3532]	1802	MakeISO
[3522]	1803	fi
	1804	else
	1805	# USB
[1684]	1806	if [ "$ARCH" != "ia64" ] ; then
[2939]	1807	syslinux -v 2>&1 \| grep -q 4.02
	1808	if [ $? -eq 0 ]; then
	1809	# This buggy version of syslinux requires a call to --stupid and not -s
	1810	syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
	1811	res=$?
	1812	else
	1813	syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
	1814	res=$?
	1815	fi
	1816	if [ $res -ne 0 ] ; then
[2963]	1817	LogAll "----------- syslinux's errors --------------"
[1684]	1818	cat $MINDI_TMP/syslinux.log \|tee -a $LOGFILE
[2963]	1819	LogAll "------------------------------------------"
[3565]	1820	LogAll "ERROR: Failed to create USB image."
[1684]	1821	else
[2963]	1822	LogFile "INFO: Created bootable USB image on $USBDEVICE"
[1684]	1823	fi
	1824	rm -f $MINDI_TMP/syslinux.log
	1825	else
[2963]	1826	LogAll "ERROR: No USB boot support for ia64"
[1684]	1827	MindiExit -1
	1828	fi
[3522]	1829	fi
[1684]	1830	}
	1831
	1832
[3522]	1833	OfferToMakeBootableUSB() {
	1834
	1835	local i files
	1836
	1837	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
	1838	echo -en "\nShall I make a bootable USB device ? (y/[n]) "
	1839	read i
	1840	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1841	if [ "$USBDEVICE" = "" ]; then
	1842	echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
	1843	read dev
	1844	USBDEVICE=$dev
	1845	fi
	1846	echo "WARNING: This will erase all content on $USBDEVICE"
	1847	echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
	1848	read i
	1849	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1850	else
	1851	if [ "$PROMPT_MAKE_USB_IMAGE" = "no" ] && [ _"$MONDO_SHARE" = _"" ] && [ "$USBDEVICE" = "" ]; then
	1852	Die "No USBDEVICE environment variable declared, aborting"
	1853	fi
	1854	fi
	1855	USBPART="${USBDEVICE}1"
	1856
	1857	MakeBootableDevice USB
	1858	}
	1859
	1860
	1861	OfferToMakeBootableISO() {
	1862
	1863	local i files
	1864
	1865	if [ -z "$ISO_CMD" ]; then
	1866	LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
	1867	return
	1868	fi
	1869
	1870	if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
	1871	echo -en "\nShall I make a bootable CD image? (y/[n]) "
	1872	read i
	1873	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1874	fi
	1875
	1876	MakeBootableDevice ISO
	1877
	1878	}
	1879
	1880
[747]	1881	MakeMessageFile() {
[2292]	1882
	1883	if [ -x "/bin/lsb_release" ]; then
	1884	DESC=`/bin/lsb_release -d \| cut -d: -f2 \| sed "s/[ \t]*//"`
[3173]	1885	elif [ -r /etc/arch-release ]; then # this code must be written before /etc/issue test to avoid errors
	1886	DESC="Arch Linux"
	1887	if [ -r /var/log/pacman.log ]; then
	1888	# there are no releases but we can get the last system upgrade
	1889	# Output example: Arch Linux [2011-03-03 01:39]
	1890	DESC="$DESC $(tac /var/log/pacman.log \| grep -m1 'full system upgrade' \| cut -d']' -f1)]"
[2754]	1891	fi
[3426]	1892	elif [ -x "/etc/os-release" ]; then
	1893	DESC=`grep PRETTY_NAME /etc/os-release \| cut -d= -f2`
	1894	elif [ -x "/usr/bin/pbdistrocheck" ]; then
	1895	# For pb >= 0.9.8
	1896	DESC=`/usr/bin/pbdistrocheck -s \| cut -d, -f1-4 \| sed 's/,/-/g'`
[2732]	1897	elif [ -r /etc/issue.net ]; then
[2731]	1898	DESC=`head -1 /etc/issue.net`
[2732]	1899	elif [ -r /etc/issue ]; then
[2731]	1900	DESC=`head -1 /etc/issue`
[747]	1901	else
[2731]	1902	DESC="Unknown desc"
[747]	1903	fi
[2292]	1904	sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt \| sed "s/KKKKK/Kernel $KERVER/" \| sed "s/AAAAA/on a $ARCH architecture/" \| sed "s/TTTTT/`LC_TIME=C date`/" \| sed "s/MMMMM/`hostname`/" \| sed "s/DDDDD/$DESC/"
[1885]	1905	if [ _"$MONDO_SHARE" != _"" ]; then
	1906	if [ "$CDRECOVERY" != "yes" ] ; then
[3270]	1907	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3281]	1908	echo -en "Press <0eenter07> for 0cnetwork restore07\n"
[3278]	1909	echo -en "$BOOT_MEDIA_MESSAGE"
[1885]	1910	elif [ ! "$MINDI_TMP" ] ; then
[3522]	1911	echo -en "FYI, this is _not_ a MondoRescue CD.\n"
	1912	if [ -e "$MINDI_LIB/memtest.img" ] ; then
	1913	echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
	1914	fi
[1885]	1915	else
	1916	echo -en "$BOOT_MEDIA_MESSAGE"
[747]	1917	fi
[1983]	1918	else
	1919	echo -en "\
[747]	1920	To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
	1921	CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
[1983]	1922	fi
[747]	1923	fi
[3173]	1924
	1925	# Also create the other help screens
	1926	head -24 $MINDI_CONF/README.bootparam \| cut -c1-80 > $1/boot1.txt
	1927	head -48 $MINDI_CONF/README.bootparam \| tail -24 \| cut -c1-80 > $1/boot2.txt
	1928	head -24 $MINDI_CONF/README.pxe \| cut -c1-80 > $1/pxe.txt
[747]	1929	}
	1930
	1931
[1983]	1932	MakeBootConfFile() {
[1885]	1933	local options i ooo
[747]	1934	options=""
[1983]	1935	# Type of boot file (elilo or syslinux/isolinux)
	1936	type=$1
	1937	if [ "$type" = "elilo" ]; then
	1938	sep="="
[3398]	1939	sepdef="="
[1983]	1940	else
	1941	sep=" "
[3398]	1942	sepdef=" "
	1943	if [ "$type" = "grub" ]; then
	1944	sepdef="="
	1945	fi
[1983]	1946	fi
[925]	1947
[1983]	1948	# Generic header for conf file
[3398]	1949	if [ "$type" = "elilo" ]; then
	1950	echo -en "prompt\n"
	1951	elif [ "$type" = "grub" ]; then
	1952	echo -en "pause Press a key when ready to restore\n"
[3518]	1953	elif [ "$type" = "grub2" ]; then
	1954	echo -en "set "
[3398]	1955	else
[3535]	1956	# syslinux family
[3173]	1957	echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
[925]	1958	fi
[1983]	1959
	1960	# Compute which default option to boot from
[3398]	1961	echo -en "default${sepdef}"
[747]	1962	if [ "$CDRECOVERY" = "yes" ] ; then
[3398]	1963	if [ "$type" = "grub" ]; then
[3430]	1964	# TODO: Which num ???
[3398]	1965	echo -en "0\n"
	1966	else
	1967	echo -en "RESTORE\n"
	1968	fi
[1983]	1969	# In case it's mondoarchive
[1885]	1970	elif [ _"$MONDO_SHARE" != _"" ]; then
[3270]	1971	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3398]	1972	if [ "$type" = "grub" ]; then
	1973	echo -en "3\n"
	1974	else
	1975	echo -en "iso\n"
	1976	fi
[747]	1977	else
[3398]	1978	if [ "$type" = "grub" ]; then
	1979	echo -en "1\n"
	1980	else
	1981	echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
	1982	fi
[747]	1983	fi
	1984	else
[3398]	1985	if [ "$type" = "grub" ]; then
	1986	echo -en "0\n"
	1987	else
	1988	echo -en "expert\n"
	1989	fi
[747]	1990	fi
	1991
[1983]	1992	# Handle timeout
[3518]	1993	if [ "$type" = "grub" ]; then
	1994	sep='='
	1995	fi
[747]	1996	if [ "$CDRECOVERY" != "yes" ] ; then
[3053]	1997	echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
[1983]	1998	else
	1999	echo -en "timeout${sep}10000\n"
[747]	2000	fi
	2001	echo -en "\n"
[1983]	2002
[2124]	2003	# prepare which labels will be generated
[747]	2004	if [ "$CDRECOVERY" = "yes" ] ; then
[925]	2005	options="RESTORE expert"
[1885]	2006	else
	2007	if [ _"$MONDO_SHARE" != _"" ]; then
[2344]	2008	options="interactive expert compare iso nuke isonuke"
[747]	2009	else
	2010	options="expert"
[925]	2011	fi
[747]	2012	fi
[1983]	2013
	2014	# Generate rest of conf file
[747]	2015	for i in $options ; do
[925]	2016	ooo=$i
[3111]	2017	[ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
[1983]	2018	if [ "$type" = "elilo" ]; then
[2564]	2019	outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
[3398]	2020	elif [ "$type" = "grub" ]; then
[3415]	2021	outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
[3518]	2022	elif [ "$type" = "grub2" ]; then
[3535]	2023	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2024	lorder="linuxefi"
	2025	iorder="initrdefi"
	2026	else
	2027	lorder="linux"
	2028	iorder="initrd"
	2029	fi
	2030	outstr="menuentry '$i' {\n\tinsmod all_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod part_gpt\n\tinsmod ext2\n\tinsmod xfs\n\techo 'Loading kernel...'\n\t$lorder /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\techo 'Loading ramdisk...'\n\t$iorder /initrd.img\n}\n"
[925]	2031	else
[2073]	2032	ps="/"
[2629]	2033	if [ $KERNEL_IS_XEN = "no" ]; then
	2034	outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
	2035	else
	2036	outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
	2037	fi
[925]	2038	fi
[1885]	2039	echo -en "$outstr"
[747]	2040	done
[1983]	2041	if [ -e "$MINDI_LIB/memtest.img" ] ; then
	2042	if [ "$type" = "elilo" ]; then
	2043	echo -en "image=/memtest.bin\n\tlabel=memtest\n"
[2073]	2044	echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
[3398]	2045	elif [ "$type" = "grub" ]; then
[3415]	2046	echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
[3518]	2047	elif [ "$type" = "grub2" ]; then
	2048	echo -en "menuentry 'memtest' {\n\tload_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod xfs\n\tlinux /memtest\n\tinitrd /memtest.img\n}\n"
[1983]	2049	else
[2073]	2050	ps="/"
	2051	if [ "$type" = "syslinux" ]; then
	2052	ps=""
	2053	fi
	2054	echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
	2055	echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
[1983]	2056	fi
	2057	fi
[747]	2058	}
	2059
[2006]	2060	ParseModprobeForIncludes() {
	2061	local MODPROBE_CONF mpincfile includes include
	2062
	2063	MODPROBE_CONF=/etc/modprobe.conf
	2064	mpincfile=$1
	2065	touch $mpincfile
	2066	if [ -a $MODPROBE_CONF ]; then
[2431]	2067	includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF\|sort -u)
[2006]	2068	if [ -n "$includes" ]; then
	2069	for include in $includes
	2070	do
	2071	if [ -a "$include" ]; then
	2072	echo $include >> $mpincfile
	2073	fi
	2074	done
	2075	fi
	2076	fi
	2077	}
	2078
	2079
[747]	2080	PrepareDataDiskImages() {
[3522]	2081	local needlist bigdir diskdir res i j k lines lfiles includefile
[747]	2082
[3407]	2083	rm -f $MINDI_CACHE/mindi.iso
[940]	2084	needlist=$MINDI_TMP/what-we-need.txt
	2085	bigdir=$MINDI_TMP/bigdir
[747]	2086	mkdir -p $bigdir/usr/bin
[1983]	2087	mkdir -p $bigdir/usr/sbin
[2006]	2088	includefile=$MINDI_TMP/$$.includefile.txt
[747]	2089
[3149]	2090	lfiles=`ls $DEPLIST_DIR/* \| grep -v /minimal`
[2409]	2091	if [ -e "$DEPLIST_FILE" ]; then
[3149]	2092	lfiles="$DEPLIST_FILE $lfiles"
[2409]	2093	fi
[1885]	2094	lines=`grep -vx " #." $lfiles \| grep -vx "" \| wc -l`
[2006]	2095	ParseModprobeForIncludes $includefile
[2019]	2096	lines=$(($lines+`cat $includefile \| wc -l`))
[2006]	2097	cat $lfiles $includefile \| GenerateGiantDependencyList $needlist $lines
[747]	2098	res=$?
[2006]	2099	rm -f $includefile
[3231]	2100	ListKernelModulePaths >> $needlist
[747]	2101	if [ "$res" -ne "0" ] ; then
[1902]	2102	Die "You have $res files present in dependency list\nbut absent from filesystem."
[747]	2103	fi
	2104	mkdir -p $bigdir/tmp
[1885]	2105	if [ _"$MONDO_SHARE" != _"" ]; then
[3430]	2106	# TODO: no reason to have the cfg file stored twice
[3278]	2107	MakeMondoConfigFile $MINDI_TMP/$MRCFG
	2108	cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
[747]	2109	fi
[3281]	2110
	2111	# Needs to be done after the MRCFG creation
	2112	FindAndAddUserKeyboardMappingFile
	2113
[3166]	2114	[ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
[747]	2115	DropOptimizedLibraries $needlist $bigdir
[3522]	2116	echo -en "INFO: Assembling dependency files"
[747]	2117
[3522]	2118	CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist` 1
	2119	echo -e "$DONE"
[3149]	2120
[925]	2121	# also copy io.sys and msdos.sys, if we can find them
[747]	2122	for i in `mount \| cut -d' ' -f3` ; do
[925]	2123	for j in io.sys msdos.sys ; do
[963]	2124	[ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
[925]	2125	done
[747]	2126	done
	2127
[925]	2128	# master boot record, too
[940]	2129	i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
[3403]	2130	if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
[3149]	2131	LogAll "INFO: Backing up $i's MBR"
[925]	2132	dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
	2133	sleep 1
	2134	sync
	2135	j=$i
	2136	[ -h "$j" ] && j=`readlink -f $j`
[3149]	2137	LogAll "INFO: Creating /dev/boot_device ($j)"
[925]	2138	mkdir -p $bigdir/dev
[2089]	2139	cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE \|\| Die "Unable to create /dev/boot_device on ramdisk"
[747]	2140	fi
	2141
[1983]	2142	# Get terminfo content
	2143	ti="usr/share/terminfo/l"
	2144	if [ -d /$ti ]; then
[3522]	2145	mkdir -p $bigdir/$ti
	2146	cp -Rdf /$ti/* $bigdir/$ti 2>> $LOGFILE \|\| LogAll "ERROR: issue copying terminfo"
[747]	2147	fi
[1764]	2148	if [ -e "$MONDO_SHARE/restore-scripts" ]; then
[3543]	2149	cp -Rdf $MONDO_SHARE/restore-scripts/mondo/* $bigdir/usr/bin 2>> $LOGFILE
[3528]	2150	[ $? -ne 0 ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
[3543]	2151	cp -Rdf $MONDO_SHARE/restore-scripts/etc/* $bigdir/etc 2>> $LOGFILE
[747]	2152	fi
[2290]	2153	if [ -d "/lib/dev-state" ]; then
[3542]	2154	cp -a /lib/dev-state $bigdir/lib/ 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
[2290]	2155	fi
[747]	2156	TOTAL_BIGDIR_SIZE=`du -sk $bigdir \| cut -f1`
[940]	2157	MakeMountlist $MINDI_TMP/mountlist.txt
[2432]	2158	CheckMountlist $MINDI_TMP/mountlist.txt
[1902]	2159	mkdir -p $bigdir/tmp
[2092]	2160	cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE \|\| Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
[1885]	2161	if [ _"$MONDO_SHARE" != _"" ]; then
[1902]	2162	cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
[1885]	2163	fi
[2032]	2164	if [ $LVM != "false" ]; then
	2165	$MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
[3528]	2166	if [ $? -ne 0 ]; then
[2032]	2167	LVM="false"
	2168	rm -f $bigdir/tmp/i-want-my-lvm
[2552]	2169	else
[2963]	2170	LogFile "Your i-want-my-lvm file content is:"
	2171	LogFile "-----------------------------------"
[2552]	2172	cat $bigdir/tmp/i-want-my-lvm >> $LOGFILE
[2963]	2173	LogFile "-----------------------------------"
[2032]	2174	fi
	2175	fi
[3522]	2176	LogFile "INFO: Your mountlist.txt file content is:"
[2963]	2177	LogFile "-----------------------------------"
[1902]	2178	cat $bigdir/tmp/mountlist.txt >> $LOGFILE
[2963]	2179	LogFile "-----------------------------------"
[2432]	2180
[2092]	2181	echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
	2182	echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
[1902]	2183	if [ _"$MONDO_SHARE" != _"" ]; then
	2184	for q in filelist.full.gz biggielist.txt ; do
	2185	[ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
	2186	cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
	2187	done
	2188	fi
	2189
[3476]	2190	# copy (e)lilo/isolinux/grub/whatever stuff into it as well
[3419]	2191	# to get it on the media (in addition to the boot part
	2192	# and also to support UEFI boot mechanism
[3499]	2193	bootdir=$bigdir/syslinux
[3476]	2194	bootconf="$bootdir/syslinux.cfg"
[3499]	2195	boottype=syslinux
[3419]	2196	mkdir -p $bootdir
[3528]	2197	FindLdlinux32Binary
[3419]	2198	if [ "$BOOT_TYPE" != "BIOS" ]; then
	2199	if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
	2200	LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
	2201	MindiExit -1
	2202	fi
	2203	# EFI or UEFI
[3430]	2204	# TODO: names are hard-coded for now
[3419]	2205	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2206	# UEFI
[3476]	2207	efidir=$bigdir/EFI/BOOT
[3483]	2208	# On RHEL6 grub works
	2209	dname=`pbdistrocheck \| grep -E '^Name:' \| cut -d':' -f2`
	2210	dver=`pbdistrocheck \| grep -E '^Ver:' \| cut -d':' -f2`
	2211	if [ $dname = "rhel" ] && [ $dver = "6" ]; then
[3491]	2212	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
[3555]	2213	bootconf="$efidir/BOOTX64.conf"
[3483]	2214	boottype=grub
	2215	elif [ $dname = "rhel" ] && [ $dver = "7" ]; then
[3491]	2216	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
[3536]	2217	bootconf="$efidir/grub.cfg"
[3483]	2218	boottype=grub2
[3518]	2219	elif [ $dname = "debian" ] && [ $dver = "8" ]; then
	2220	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
	2221	bootconf="$efidir/grub.cfg"
	2222	boottype=grub2
[3491]	2223	else
	2224	# Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
	2225	FindSyslinux64EFI
	2226	bootbin=$SYSLINUX64EFI
	2227	bootconf="$efidir/syslinux.cfg"
[3483]	2228	fi
[3538]	2229
	2230	# Depending on the arch, the target boot file is different
	2231	if [ "$ARCH" = "x86_64" ] ; then
[3555]	2232	tgbin="BOOTX64.efi"
[3538]	2233	elif [ "$ARCH" = "armv8" ]; then
[3555]	2234	tgbin="BOOTAA64.efi"
[3538]	2235	else
	2236	# i?386
[3555]	2237	tgbin="BOOTIA32"
[3538]	2238	fi
[3419]	2239	else
	2240	# EFI
[3476]	2241	efidir=$bootdir
	2242	bootbin=`find /boot/efi -iname "elilo.efi" \| head -1`
[3538]	2243	tgbin=$bootbin
[3476]	2244	boottype=elilo
	2245	bootconf="$efidir/elilo.conf"
[3419]	2246	fi
[3522]	2247	LogAll "INFO: Found $boottype boot type"
[3419]	2248
	2249	# Copy it so that CD-ROM menu entry is satisfied
	2250	mountefi=0
	2251	df -T \| grep /boot/efi \| grep -qE 'vfat'
	2252	if [ $? -ne 0 ]; then
	2253	mount /boot/efi
	2254	if [ $? -ne 0 ]; then
[3522]	2255	echo "ERROR: You have to mount your (U)EFI partition when using mindi"
[3419]	2256	MindiExit -1
	2257	fi
	2258	mountefi=1
	2259	fi
[3476]	2260	mkdir -p $efidir
[3538]	2261	cp $bootbin $efidir/$tgbin
[3419]	2262	if [ $mountefi -eq 1 ]; then
	2263	umount /boot/efi 2>&1 > /dev/null
	2264	fi
[3479]	2265
[3499]	2266	if [ $boottype = "syslinux" ]; then
[3491]	2267	FindLdlinuxe64Binary
	2268	if [ -e "$LDLINUXE64" ]; then
	2269	LogFile "INFO: Copying $LDLINUXE64 to $efidir"
	2270	cp $LDLINUXE64 $efidir 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
[3542]	2271	cp $LDLINUXE64/../libutil.c32 $efidir 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
[3491]	2272	fi
[3479]	2273	fi
[3528]	2274	# In all cases prepare syslinux content for BIOS mode
	2275	# so that we can have multi boot mode media BIOS+UEFI
	2276	if [ -e "$LDLINUXC32" ]; then
	2277	LogFile "INFO: Copying $LDLINUXC32 to $bigdir/EFI"
	2278	cp $LDLINUXC32 "$bigdir/EFI" 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXC32 to $bigtdir/EFI. Did you run out of disk space?"
	2279	fi
	2280	else
[3479]	2281	# Useful for syslinux 5.x
	2282	if [ -e "$LDLINUXC32" ]; then
	2283	LogFile "INFO: Copying $LDLINUXC32 to $bootdir"
[3522]	2284	cp $LDLINUXC32 $bootdir 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXC32 to $bootdir. Did you run out of disk space?"
[3479]	2285	fi
[3419]	2286	fi
[3479]	2287
[3525]	2288	# Here we need to know the ramdisk_size
	2289	size_of_all_tools=`du -sk $bigdir \| cut -f1`
	2290	export ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
	2291	LogFile "INFO: Ramdisk will be $ramdisk_size KB"
	2292
[3476]	2293	MakeBootConfFile $boottype > $bootconf
[3554]	2294	LogFile "Boot Conf file $bootconf content is:"
	2295	LogFile "------------------------------------"
	2296	cat $bootconf >> $LOGFILE
	2297	LogFile "------------------------------------"
[3528]	2298	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2299	# Also generate the syslinux conf
	2300	MakeBootConfFile syslinux > "$bigdir/EFI/syslinux.cfg"
[3554]	2301	LogFile "Boot Conf file $bigdir/EFI/syslinux.cfg content is:"
	2302	LogFile "---------------------------------------------------"
[3557]	2303	cat $bigdir/EFI/syslinux.cfg >> $LOGFILE
[3554]	2304	LogFile "---------------------------------------------------"
[3528]	2305	fi
[3419]	2306
[3522]	2307	echo -en "INFO: Tarring and zipping the data content..."
[3407]	2308	(cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log \| gzip -9 > $MINDI_CACHE/all.tar.gz \|\| LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
[3149]	2309	LogFile "Size of the data content"
	2310	LogFile "------------------------"
[3407]	2311	du -sk $MINDI_CACHE/*gz >> $LOGFILE
[3149]	2312	LogFile "------------------------"
[1902]	2313	echo -e "$DONE"
	2314
[3565]	2315	[ "$bigdir" != "/" ] && rm -rf $bigdir
[747]	2316	rm -f $needlist
	2317	}
	2318
	2319
	2320	Prompt() {
	2321	echo -en "$1"
	2322	read line
	2323	}
	2324
	2325
	2326	ReadLine() {
	2327	local i incoming
	2328	read incoming
	2329	i=0
	2330	while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
[925]	2331	i=$(($i+1))
	2332	read incoming
[747]	2333	done
	2334	echo "$incoming"
	2335	}
	2336
	2337
	2338	SizeOfPartition() {
	2339	local devpath drive res stub
	2340	device=$1
[2917]	2341	if [ "`echo "$device" \| grep -E "^/dev/"`" = "" ] ; then
	2342	Die "Cannot find $device's size - is your /etc/fstab sane?"
	2343	fi
[747]	2344	if [ "`echo "$device" \| grep -F "/dev/md"`" != "" ] ; then
[925]	2345	res=`SizeOfRaidPartition $device`
	2346	[ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
	2347	echo "$res"
	2348	return 0
[747]	2349	fi
[925]	2350	# patch from Bill <bill@iwizard.biz> - 2003/08/25
[960]	2351	res=`$FDISK -s $device 2>> $LOGFILE`
[925]	2352	# end patch
[2448]	2353	# take only the first in case of multiple mount (cifs, nfs, ...)
	2354	[ "$res" = "" ] && res=`df -k -P -x supermount \| tr -s '\t' ' ' \| grep -F "$device " \| cut -d' ' -f2 \| head -1`
[747]	2355	[ "$res" = "" ] && res="-1"
	2356	echo $res
	2357	return 0
	2358	}
	2359
	2360
	2361	SizeOfRaidPartition() {
	2362	local real_dev smallest_size silly tmp
	2363
	2364	silly=999999999
	2365	smallest_size=$silly
	2366
	2367	for real_dev in `GetRaidDevMembers $1` ; do
[925]	2368	tmp=`SizeOfPartition $real_dev`
	2369	[ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
[747]	2370	done
	2371
	2372	if [ "$smallest_size" = "$silly" ] ; then
[925]	2373	echo "-1"
	2374	return 1
[747]	2375	else
[925]	2376	echo "$smallest_size"
	2377	return 0
[747]	2378	fi
	2379	}
	2380
	2381
	2382	StripExecutable()
	2383	{
	2384	local tmpfile
[925]	2385
[940]	2386	tmpfile=$MINDI_TMP/stripped.$$.dat
[747]	2387	[ -d "$1" ] \|\| [ -h "$1" ] && return
[963]	2388	cp -f $1 $tmpfile 2>> $LOGFILE
[747]	2389	strip $tmpfile 2> /dev/null
[3528]	2390	if [ $? -eq 0 ] ; then
[963]	2391	cp -f $tmpfile $1 2>> $LOGFILE
[2963]	2392	LogFile "INFO: Stripped binary $2"
[747]	2393	fi
	2394	rm -f $tmpfile
	2395	}
	2396
[2292]	2397	KernelVer() {
	2398	local fkern_ver fname
[747]	2399
[2292]	2400	fname=$1
	2401	file $fname \| grep -q gzip
[3528]	2402	if [ $? -eq 0 ] ; then
[2292]	2403	# Used by ia64
[3528]	2404	fkern_ver=`gzip -cd $fname \| strings 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
[2292]	2405	else
[3528]	2406	fkern_ver=`strings $fname 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
[2292]	2407	fi
	2408	echo "$fkern_ver"
	2409	}
	2410
	2411
[2880]	2412	# WARNING: This function should just echo the final result !!!
	2413	#
[747]	2414	TryToFindKernelPath() {
[2880]	2415	local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
[925]	2416
[2292]	2417	we_want_version=$KERVERRUN
[747]	2418	possible_kernels=""
	2419	duff_kernels=""
[2880]	2420	output=""
[3368]	2421
[747]	2422	if [ "$ARCH" = "ia64" ] ; then
	2423	root="/boot/efi/efi"
	2424	else
	2425	root="/"
	2426	fi
[2681]	2427	# See if we're booted from a Xen kernel
[2889]	2428	# From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
	2429	if [ -f /proc/xen/capabilities ]; then
[2681]	2430	# It's a Xen kernel
	2431	KERNEL_IS_XEN="yes"
[2963]	2432	LogFile "INFO: It's a Xen kernel..."
[2681]	2433	fi
	2434
[3122]	2435	for fname in `find $root -maxdepth 2 -type f \| grep -Ei 'lin\|kern\|xen' \| grep -Ev '^/proc/\|^/net/\|^/mnt\|^/lib\|^/lib64\|^/bin\|^/sbin\|^/usr\|^/tmp'` ; do
[925]	2436	[ ! -e "$fname" ] && continue
[747]	2437	[ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
[2292]	2438	fkern_ver=`KernelVer $fname`
[747]	2439	[ "$fkern_ver" = "" ] && continue
	2440	[ "`echo "$fkern_ver" \|grep -F "$we_want_version "`" = "" ] && continue
[925]	2441	[ -f "$fname" ] \|\| continue
	2442	[ -h "$fname" ] && continue
	2443	kdate=`uname -v \| $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' \| $AWK '{print $NF;}'`
	2444	file $fname \| grep -q gzip
[3528]	2445	if [ $? -eq 0 ] ; then
[925]	2446	# Used by ia64
	2447	if [ "`gzip -cd $fname \| strings 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[2880]	2448	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
[925]	2449	duff_kernels="$fname $duff_kernels"
	2450	else
[747]	2451	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2452	possible_kernels="$fname $possible_kernels"
[925]	2453	fi
[747]	2454	else
[925]	2455	if [ "`strings $fname 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[2880]	2456	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
[925]	2457	duff_kernels="$fname $duff_kernels"
	2458	else
[747]	2459	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2460	possible_kernels="$fname $possible_kernels"
[925]	2461	fi
[747]	2462	fi
	2463	done
	2464	if [ ! "$possible_kernels" ] && uname -a \| grep Knoppix > /dev/null ; then
[3535]	2465	possible_kernels=`find /boot/vmlinuz-[2-9].* \| tail -n1`
[747]	2466	fi
	2467	if [ ! "$possible_kernels" ] ; then
[3149]	2468	LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
[747]	2469	possible_kernels="$duff_kernels"
	2470	if [ ! "$possible_kernels" ] ; then
[3149]	2471	LogAll "INFO: Sorry, no duff kernels either"
[747]	2472	else
[3149]	2473	LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
	2474	LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
[747]	2475	fi
	2476	fi
[2681]	2477	if [ $KERNEL_IS_XEN = "yes" ]; then
	2478	possible_xenkernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -i "xen" \| sort -u \| tr '\n' ' '`
	2479	noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
	2480	fi
[2829]	2481	possible_kernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -vi "xen" \| sort -u \| tr '\n' ' '`
	2482	noof_kernels=`CountItemsIn "$possible_kernels"`
[747]	2483	if [ "$noof_kernels" -eq "0" ] ; then
[3149]	2484	LogAll "Could not find your kernel."
[925]	2485	if [ -e "/boot/vmlinuz" ] ; then
[3149]	2486	LogAll "INFO: Using /boot/vmlinuz as a last resort."
[925]	2487	output=/boot/vmlinuz
[747]	2488	else
[925]	2489	output=""
	2490	fi
[747]	2491	elif [ "$noof_kernels" -eq "1" ] ; then
[2880]	2492	kp=`echo "$possible_kernels" \| sed s/' '//`
[2963]	2493	LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
[2880]	2494	output="$kp"
[747]	2495	else
	2496	for i in $possible_kernels ; do
[2880]	2497	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
[3149]	2498	LogAll "INFO: OK, I used my initiative and found that "
	2499	LogAll "INFO: $i is probably your kernel. "
[925]	2500	output="$i"
[2858]	2501	break
[925]	2502	fi
[747]	2503	done
[2858]	2504	if [ ! -n "$output" ]; then
[2880]	2505	if [ "`echo " $possible_kernels " \| grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
[2681]	2506	output=/boot/vmlinuz
[2963]	2507	LogFile "INFO: Schlomo, this one's for you."
[2681]	2508	else
[2963]	2509	LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
	2510	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
	2511	LogFile "INFO: $possible_kernels"
[2880]	2512	output=""
[2681]	2513	fi
	2514	fi
	2515	fi
	2516	if [ $KERNEL_IS_XEN = "yes" ]; then
	2517	if [ "$noof_xenkernels" -eq "0" ]; then
	2518	xenkernelpath=""
	2519	elif [ "$noof_xenkernels" -eq "1" ]; then
	2520	xenkernelpath=`echo "$possible_xenkernels" \| sed s/' '//`
[2963]	2521	LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
[925]	2522	else
[2681]	2523	for i in $possible_xenkernels ; do
[2880]	2524	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
[2963]	2525	LogFile "INFO: OK, I used my initiative and found that "
	2526	LogFile "INFO: $i is probably your Xen kernel. "
[2681]	2527	xenkernelpath="$i"
[2858]	2528	break
[2681]	2529	fi
	2530	done
[2858]	2531	if [ ! -n "$xenkernelpath" ]; then
[2681]	2532	new_possible_xenkernels=`echo "$possible_xenkernels" \| tr -s ' ' '\n' \| grep -E "^/boot" \| sort -u \| tr '\n' ' '`
	2533	if [ ! -n "$new_possible_xenkernels" ]; then
	2534	xenkernelpath=`echo $new_possible_xenkernels \| tr -s ' ' '\n' \| head -1`
[2963]	2535	LogFile "INFO: Using $xenkernelpath"
[2681]	2536	else
[2963]	2537	LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
	2538	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
	2539	LogFile "INFO: $possible_xenkernels"
[2880]	2540	output=""
[2681]	2541	xenkernelpath=`echo $possible_xenkernels \| tr -s ' ' '\n' \| head -1`
[2963]	2542	LogFile "INFO: Using $xenkernelpath"
[2681]	2543	fi
	2544	fi
[925]	2545	fi
[2681]	2546	if [[ -z "$xenkernelpath" \|\| ! -f "$xenkernelpath" ]]; then
	2547	Die "Cannot find Xen kernel $xenkernelpath, aborting"
	2548	fi
[747]	2549	fi
[3357]	2550	#LogAll "TryToFindKernelPath found $output"
[2681]	2551	echo "$output"
[747]	2552	}
	2553
	2554
[3522]	2555	MakeBootInitFile() {
	2556	local tgz_dir_fname rdz_fname tempfile nodes kernelsize res currsize not_copied j k s w needed_modules_path d thelink templog
[925]	2557
[747]	2558	tgz_dir_fname=$1
	2559	rdz_fname=$2
[1983]	2560	kernelsize=$3
[940]	2561	tempfile=$MINDI_TMP/temp.rd
[3403]	2562	res=0
	2563	templog=$MINDI_TMP/$$.log
	2564	> $templog
	2565
[3522]	2566	LogAll "INFO: Making Boot RAM Disk ($ramdisk_size KB)"
	2567	dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null \|\| Die "Not enough room for temporary ramdisk (MakeBootInitFile)"
	2568	LogAll "INFO: Creating ext2 filesystem on $tempfile"
[1764]	2569	mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE \|\| Die "Unable to create an ext2 file system on $tempfile"
[747]	2570	mkdir -p $mountpoint
	2571	mount -t ext2 -o loop $tempfile $mountpoint \|\| Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
[2034]	2572
[3248]	2573	# Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
	2574	for d in bin sbin lib lib64; do
	2575	if [ -h "/$d" ]; then
	2576	thelink=`readlink /$d`
[3565]	2577	mkdir -p $mountpoint/$thelink \|\| LogAll "ERROR: Unable to create $thelink in $mountpoint."
[3248]	2578	mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
	2579	if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
	2580	rmdir $mountpoint/$d
	2581	fi
	2582	if [ ! -h $mountpoint/$d ]; then
	2583	rm -f $mountpoint/$d 2> /dev/null
[3565]	2584	(cd $mountpoint ; ln -s $thelink $d) \|\| LogAll "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
[3248]	2585	fi
	2586	fi
	2587	done
[3357]	2588
[3248]	2589	LogFile "INFO: what is now in $mountpoint"
[3522]	2590	ls -al $mountpoint >> $LOGFILE
[3172]	2591
[2963]	2592	# Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
[3357]	2593	# copy from rootfs into mountpoint
[3522]	2594	LogAll "INFO: Copying Mindi files onto $mountpoint"
[2963]	2595	for f in $tgz_dir_fname/*; do
	2596	if [ ! -r $f ]; then
	2597	Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
	2598	else
[3522]	2599	cp -af $f $mountpoint 2>&1 >> $LOGFILE
[2963]	2600	fi
	2601	done
[3522]	2602	(cd $mountpoint/etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
	2603	(cd $mountpoint ; ln -sf usr/sbin/init linuxrc)
[1914]	2604
[3522]	2605	(cd $mountpoint/dev ; tar -zxf dev-entries.tgz \|\| Die "Cannot untar dev-entries.tgz" ; rm -f dev-entries.tgz)
[747]	2606
	2607	for w in insmod.static insmod.static.old ; do
[925]	2608	s=`which $w 2> /dev/null`
	2609	if [ -e "$s" ] ; then
[3522]	2610	tar cf - -C / $s 2> /dev/null \| (cd $mountpoint ; tar xf -)
[925]	2611	fi
[747]	2612	done
	2613
	2614	[ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
[2951]	2615
[2438]	2616	# Copy of files mandatory for ssh to automate mount if sshfs is used
[3358]	2617	mkdir -p $mountpoint/.ssh $mountpoint/tmp
[3204]	2618	cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
[3241]	2619	cat > $mountpoint/tmp/myssh << EOF
[2438]	2620	ssh -o StrictHostKeyChecking=no $*
	2621	EOF
	2622	chmod 755 $mountpoint/tmp/myssh
	2623
[2039]	2624	# Copy of files mandatory for ld.so
[3204]	2625	cp -a /etc/ld.so.c* $mountpoint/etc
[2039]	2626
[2951]	2627	# Handle the case where busybox and mount are dynamically linked
[3231]	2628	file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 \| grep -q "dynamically"
[2951]	2629	if [ $? -eq 0 ]; then
	2630	# We want to use the real mount and all the supported variants (nfs, cifs, ...)
[3565]	2631	rm -f $mountpoint/bin/mount
[2951]	2632	fi
	2633
[3522]	2634	# Copy of files from the minimal env needed as per the deplist.d/minimal.conf (which includes all busybox deps)
	2635	echo -en "INFO: Gathering dependencies of required files..."
[3081]	2636	rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
[3522]	2637	lines=`cat $DEPLIST_DIR/minimal.conf \| grep -vE " #.\|^#" \| sort -u`
	2638	noof_lines=`echo $lines \| wc -w`
	2639	progress=0
	2640	for f in $lines; do
[3277]	2641	if [ -d $f ]; then
	2642	for g in `find $f`; do
	2643	echo $g >> $MINDI_TMP/minimal.lis
	2644	LocateDeps $g >> $MINDI_TMP/minimal2.lis
	2645	done
	2646	else
	2647	if [ -r $f ]; then
	2648	echo $f >> $MINDI_TMP/minimal.lis
	2649	LocateDeps $f >> $MINDI_TMP/minimal2.lis
	2650	fi
[3081]	2651	fi
[3522]	2652	progress=$(($progress+1))
	2653	LogProgress $progress $noof_lines
[2951]	2654	done
[3522]	2655	echo -e "$DONE"
	2656	echo -en "INFO: Processing all dependencies links..."
	2657	lines=`sort -u $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis`
	2658	noof_lines=`echo $lines \| tr ' ' '\n' \| wc -l`
	2659	progress=0
	2660	for f in $lines; do
[3231]	2661	mr-read-all-link $f >> $MINDI_TMP/minimal.lis
[3522]	2662	progress=$(($progress+1))
	2663	LogProgress $progress $noof_lines
[2951]	2664	done
[3522]	2665	echo -e "$DONE"
[2951]	2666	# Initial / are trucated by tar
[3014]	2667	finallist=""
[3204]	2668	# Remove directories from the list, as tar/cp will create them anyway
[3014]	2669	# and it may hurt if /lib is in it as on Debian/Ubuntu
[3166]	2670	# recent bash says that -d is true for a link to a dir !
[3014]	2671	for f in `sort -u $MINDI_TMP/minimal.lis`; do
[3479]	2672	if [ -e "$f" -a ! -d "$f" ] \|\| [ -h $f ]; then
[3357]	2673	# Do not overwrite files already in destination (avoid using option -n of cp not portable)
	2674	if [ ! -e "$mountpoint/$f" ]; then
	2675	finallist="$finallist $f"
	2676	fi
[3014]	2677	fi
	2678	done
[3357]	2679	rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
	2680
[3522]	2681	fnllist=`echo $finallist \| tr ' ' '\n' \| sort -u \| tr '\n' ' '`
	2682	LogFile "INFO: Copy the minimal env with cp -a --parents $fnllist -t $mountpoint"
[3565]	2683	cp -a --parents $fnllist -t $mountpoint 2> $templog \|\| LogAll "WARNING: Problem in minimal analysis" $templog
[3000]	2684
[3357]	2685	# In case target /bin dir still doesn't exist, create it before using it
	2686	if [ ! -d $mountpoint/bin ]; then
	2687	mkdir -p $mountpoint/bin
	2688	fi
	2689
	2690	# For older distributions expecting /sbin/init provides it
[3525]	2691	if [ ! -e "$mountpoint/sbin/init" ]; then
[3522]	2692	(cd $mountpoint/sbin ; ln -sf ../usr/sbin/init .)
[3357]	2693	fi
	2694
[3000]	2695	# To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
[3522]	2696	(cd $mountpoint ; ln -sf /bin/bash bin/sh)
[3405]	2697	LogFile "INFO: Using bash as default shell"
[2951]	2698
	2699	# Avoids an issue on some distro (RHEL5)
[2164]	2700	rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
	2701
[1724]	2702	# Management of udev (which includes modprobe in rules)
[1759]	2703	ps auxww \| grep -v grep \| grep -qw udevd
[1716]	2704	if [ $? -eq 0 ]; then
[1914]	2705	echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
[3405]	2706	LogFile "INFO: udev device manager found"
[3565]	2707	tar cf - -C / /etc/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /etc/udev analysis" $templog
[3204]	2708	# This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
[3565]	2709	rm -f $mountpoint/etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
[2894]	2710	# Do not do it if it's a link (Ubuntu 64 bits #503)
[3197]	2711	if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
[3565]	2712	tar cf - -C / /lib64/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /lib64/udev analysis" $templog
[2894]	2713	fi
[2895]	2714	if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [ ! -h "/lib32/udev" ]; then
[3565]	2715	tar cf - -C / /lib32/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /lib32/udev analysis" $templog
[2895]	2716	fi
	2717	if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [ ! -h "/lib/udev" ]; then
[3565]	2718	tar cf - -C / /lib/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /lib/udev analysis" $templog
[2895]	2719	fi
[3261]	2720	if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [ ! -h "/usr/lib/udev" ]; then
[3565]	2721	tar cf - -C / /usr/lib/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /usr/lib/udev analysis" $templog
[3261]	2722	fi
[3489]	2723	if [ -x /sbin/udevd ] \|\| [ -x /usr/bin/udevd ] \|\| [ -x /usr/lib/systemd/systemd-udevd ] \|\| [ -x /lib/systemd/systemd-udevd ]; then
[2964]	2724	lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
[1781]	2725	lis=""
	2726	# Get only the files which exist in that list
[1815]	2727	# and potentially their symlink structure
[1781]	2728	for i in $lis2; do
[1815]	2729	if [ -h $i ]; then
	2730	j=$i
	2731	while [ -h $j ]; do
	2732	lis="$lis $j"
[3204]	2733	j=`readlink -f $j`
[1815]	2734	done
	2735	lis="$lis $j"
[3525]	2736	elif [ -d $i ]; then
	2737	lis3="$lis3 $i"
[1815]	2738	elif [ -f $i ]; then
[1781]	2739	lis="$lis $i"
	2740	fi
	2741	done
	2742	# And their deps
[1759]	2743	LocateDeps $lis > $MINDI_TMP/udev.lis
	2744	for i in $lis; do
	2745	if [ "`echo $i \| cut -c1`" = "/" ]; then
	2746	j=`echo $i \| cut -c2-`
[3565]	2747	[ "$j" != "" ] && rm -f $mountpoint/$j
[1759]	2748	fi
[3204]	2749	echo "$i" >> $MINDI_TMP/udev.lis
[1759]	2750	done
[3257]	2751	finallist=""
	2752	# Remove directories from the list, as tar/cp will create them anyway
	2753	# and it may hurt if /lib is in it as on Debian/Ubuntu
	2754	# recent bash says that -d is true for a link to a dir !
	2755	for f in `sort -u $MINDI_TMP/udev.lis`; do
[3479]	2756	if [ -e "$f" -a ! -d "$f" ] \|\| [ -h "$f" ]; then
[3357]	2757	# Do not overwrite files already in destination (avoid using option -n of cp not portable)
	2758	if [ ! -e "$mountpoint/$f" ]; then
	2759	finallist="$finallist $f"
	2760	fi
[3257]	2761	fi
	2762	done
[3525]	2763	# But adds the directory useful for udev in $lis3
[3522]	2764	fnllist=`echo $finallist \| tr ' ' '\n' \| sort -u \| tr '\n' ' '`
	2765	LogFile "INFO: Copying udev related files with cp -a --parents $fnllist -t $mountpoint/"
[3565]	2766	cp -a --parents $fnllist $lis3 -t $mountpoint/ 2> $templog \|\| LogAll "WARNING: Problem in udev.lis analysis" $templog
[1721]	2767	rm -f $MINDI_TMP/udev.lis
[1720]	2768	else
[2965]	2769	LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
[2963]	2770	LogAll " mindi will use static devices which may cause problems"
[1914]	2771	rm -f $mountpoint/tmp/USE-UDEV
[1720]	2772	fi
[1716]	2773	fi
[1786]	2774
[2882]	2775	# Management of potential HW info (ProLiant only at the moment)
[1880]	2776	rm -rf $MINDI_CACHE/bkphw
	2777	mindi-bkphw $MINDI_CACHE $MINDI_CONF \| tee -a $LOGFILE
	2778	if [ -d $MINDI_CACHE/bkphw ]; then
[3565]	2779	LogAll "INFO: Hardware Information found and saved ..."
[3522]	2780	cp -rp $MINDI_CACHE/bkphw $mountpoint
[1880]	2781	if [ -f $MINDI_CACHE/tools.files ]; then
	2782	lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
[1863]	2783	LocateDeps $lis > $MINDI_TMP/tools.lis
[3565]	2784	tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in tools.lis analysis" $templog
[1863]	2785	fi
[1880]	2786	if [ -f $MINDI_CACHE/mindi-rsthw ]; then
[3522]	2787	mv -f $MINDI_CACHE/mindi-rsthw $mountpoint
	2788	chmod 755 $mountpoint/mindi-rsthw
[1761]	2789	fi
[1880]	2790	rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
[1761]	2791	fi
	2792
[2183]	2793	# Management of perl scripts delivered needed at restore time
[3522]	2794	LogAll "INFO: Analyzing perl modules dependencies..."
[3565]	2795	mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]bin/mr- 2> $templog > $MINDI_TMP/perl.lis \|\| LogAll "ERROR: Problem in mindi-get-perl-modules" $templog
[3405]	2796	LogFile "DBG4: Perl Modules found:"
	2797	LogFile "-------------------------"
[3403]	2798	cat $MINDI_TMP/perl.lis >> $LOGFILE
[3405]	2799	LogFile "-------------------------"
[3565]	2800	tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in perl scripts analysis" $templog
[2183]	2801
[1885]	2802	for w in cdrom groovy-stuff ; do
[747]	2803	mkdir -p mnt/$w
	2804	done
	2805
[3565]	2806	tar cf - -C / /dev/fd0[1,2][4,7,8] 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in fd dev analysis" $templog
[1721]	2807
[1885]	2808	needed_modules=""
[1993]	2809	list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
[1885]	2810
[3270]	2811	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[747]	2812	# For PXE boot
	2813	list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
	2814	fi
[1727]	2815	for i in $DENY_MODS; do
[2963]	2816	LogFile "INFO: Removing $i from the list of modules to load"
[1727]	2817	list_of_groovy_mods=`echo ${list_of_groovy_mods} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
	2818	done
	2819
[3253]	2820	if [ "${kernelname}" != "" ]; then
	2821	needed_modules_path=lib/modules/${kernelname}
[3257]	2822	mkgmopt="-k ${kernelname}"
[3253]	2823	else
	2824	needed_modules_path=lib/modules/$KERVERRUN
	2825	mkgmopt="-k $KERVERRUN"
	2826	fi
[1914]	2827
[3565]	2828	[ -e "/$needed_modules_path" ] \|\| LogAll "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then mindi won't probably work."
[3522]	2829	LogAll "INFO: Analyzing kernel modules dependencies..."
[3253]	2830	needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
	2831
[3257]	2832	LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
[3565]	2833	cp --parents -aL $needed_modules $mountpoint/ 2> $templog \|\| LogAll "ERROR: Unable to copy modules to $mountpoint" $templog
[3253]	2834
	2835	# Uncompress modules if not using udev and native modprobe
	2836	if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
	2837	for i in $needed_modules; do
	2838	if [ "`echo "$i" \| grep -E ".gz$"`" ]; then
[1727]	2839	gunzip -f $mountpoint/$i
[1815]	2840	fi
[3253]	2841	if [ "`echo "$i" \| grep -E ".bz$"`" ]; then
	2842	bunzip2 -f $mountpoint/$i
	2843	fi
	2844	if [ "`echo "$i" \| grep -E ".xz$"`" ]; then
	2845	unxz -f $mountpoint/$i
	2846	fi
	2847	LogFile "INFO: Uncompressing $i"
	2848	done
	2849	fi
[1815]	2850
[2964]	2851	# Also copy modules.* in case of udev so that normal modprobe works
[3565]	2852	tar cf - -C / /$needed_modules_path/modules.* 2> $templog \| (cd "$mountpoint" ; tar xf -) \|\| LogAll "ERROR: Unable to copy modules.* to $mountpoint" $templog
[1815]	2853
[2680]	2854	# Copy FW in case some drivers needs it
[3163]	2855	for d in "/lib" "/usr/lib"; do
[3201]	2856	if [ -d "$d/firmware" -a ! -h $d ]; then
[3166]	2857	cp -a "$d/firmware" "$mountpoint/$d"
[3163]	2858	fi
	2859	done
[2680]	2860
[3163]	2861	# Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
	2862	for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
[3201]	2863	if [ -d "$d/multipath" -a ! -h $d ]; then
[3166]	2864	cp -a "$d/multipath" "$mountpoint/$d"
[3163]	2865	fi
	2866	done
	2867
[3326]	2868	# Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
[3479]	2869	(cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e "$mountpoint/bin/$i" ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done)
[3324]	2870
[2913]	2871	# Copy an additional ProLiant tool for OBDR support
	2872	if [ -f $MINDI_TMP/OBDR ]; then
[3117]	2873	found=0
[2913]	2874	if [ -x /usr/bin/hpsa_obdr_mode ]; then
	2875	mkdir -p $mountpoint/usr/bin
	2876	cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
[3565]	2877	LogAll "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
[3117]	2878	found=1
	2879	fi
	2880	if [ -x /usr/bin/sg_wr_mode ]; then
	2881	mkdir -p $mountpoint/usr/bin
[3135]	2882	lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
[3118]	2883	LocateDeps $lis > $MINDI_TMP/obdr.lis
[3565]	2884	tar cf - $lis -C / `sort -u $MINDI_TMP/obdr.lis` 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in obdr.lis analysis" $templog
	2885	LogAll "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
[3117]	2886	found=1
	2887	fi
	2888	if [ $found -eq 0 ]; then
	2889	LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
[2913]	2890	LogAll " This may lead to a tape not going back to sequential mode after OBDR boot"
	2891	fi
	2892	fi
	2893
[3499]	2894	if [ ! -e "/sbin/devfsd" ]; then
[2963]	2895	LogFile "INFO: Deleting devfsd daemon from ramdisk"
[2995]	2896	[ ! -e "/sbin/devfsd" ] && LogFile " ...because /sbin/devfsd not found"
[747]	2897	rm -f $mountpoint/sbin/devfsd
	2898	fi
	2899	[ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
[1885]	2900	if [ _"$MONDO_SHARE" != _"" ]; then
[3278]	2901	MakeMondoConfigFile $mountpoint/tmp/$MRCFG
	2902	cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE \|\| Die "Cannot copy $MRCFG to ramdisk"
[2092]	2903	cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE \|\| Die "Cannot copy mountlist to ramdisk"
[747]	2904	echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
	2905	echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
	2906	fi
[3310]	2907
	2908	# Create module list to load at restore time
	2909	rm -f $mountpoint/tmp/modules
	2910	for m in $CDROM_MODS; do
	2911	echo $m >> $mountpoint/tmp/modules
	2912	done
	2913
[747]	2914	mkdir -p $mountpoint/proc
[2963]	2915	LogFile "---------------------------"
[3372]	2916	LogFile "Size of initial ramdisk:"
	2917	LogFile "---------------------------"
	2918	(cd "$mountpoint" ; du -sh .) >> $LOGFILE
	2919	LogFile "---------------------------"
[2963]	2920	LogFile "Content of initial ramdisk:"
	2921	LogFile "---------------------------"
[2712]	2922	(cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
[2963]	2923	LogFile "---------------------------"
[2438]	2924
[1230]	2925	# Determine what filesystem to use for initrd image
[2963]	2926	LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
[1230]	2927	gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
	2928	[ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
[3008]	2929	if [ "$gvFileSystem" = "ext2fs" ] \|\| [ "$gvFileSystem" = "ext3fs" ] \|\| [ "$gvFileSystem" = "ext4fs" ]; then
[1230]	2930	# say what will be used
[2963]	2931	LogFile "INFO: Creating an $gvFileSystem initrd image..."
[1230]	2932	# kernel expects linuxrc in ext2 filesystem
[3522]	2933	(cd "$mountpoint" && ln -sf usr/sbin/init linuxrc)
[1230]	2934	# unmount loop filesystem and create image file using the standard approach
[3546]	2935	sync
[1230]	2936	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
[3522]	2937	dd if=$tempfile bs=1k of=${rdz_fname}.tmp > /dev/null 2> /dev/null
[3008]	2938	if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
	2939	bs=`/sbin/tune4fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
	2940	else
	2941	bs=`tune2fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
	2942	fi
[2564]	2943	MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
[1799]	2944	gzip -c9 ${rdz_fname}.tmp > $rdz_fname
[1764]	2945	rm -f ${rdz_fname}.tmp
[1230]	2946	# log that we are done
[2390]	2947	elif [ "$gvFileSystem" = "initramfs" ]; then
[1230]	2948	# say what will be used
[2963]	2949	LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
[1230]	2950	# make sure that cpio is there
	2951	which cpio &> /dev/null; [ $? -eq 0 ] \|\| Die "cpio not found. Please install package cpio and try again."
	2952	# kernel expects init in cpio filesystem
[3522]	2953	(cd "$mountpoint" ; ln -sf usr/sbin/init init)
[1230]	2954	# create cpio image file and unmount loop filesystem
[3524]	2955	(cd "$mountpoint" ; find . -print \| cpio -o -H newc 2> /dev/null \| gzip -9 > $rdz_fname)
[3546]	2956	sync
[1230]	2957	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
	2958	# log that we are done
[2390]	2959	else
[1230]	2960	Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
[2390]	2961	fi
	2962
[747]	2963	if [ "$res" -eq "0" ] ; then
[3525]	2964	LogAll "INFO: MakeBootInitFile finished without error."
[747]	2965	else
[3525]	2966	LogAll "WARNING: MakeBootInitFile exits WITH ERRORS."
[747]	2967	fi
	2968	return 0
	2969	}
	2970
	2971
	2972	##############################################################################
[1021]	2973	#----------------------------------- Main -----------------------------------#
[747]	2974	##############################################################################
	2975
[1885]	2976	# Now we can create what we need
	2977	mkdir -p $MINDI_TMP
[747]	2978
[2995]	2979	# --nolog needs to be first, and is used in analyze-my-lvm
	2980	if [ "$1" = "--nolog" ] ; then
	2981	shift
	2982	LOGFILE=/dev/stderr
	2983	else
	2984	> $LOGFILE
	2985	fi
[1885]	2986	if [ "$1" = "--printvar" ] ; then
	2987	shift
	2988	if [ _"$1" != _"" ] ; then
	2989	set \| grep -Ew "^$1" \| cut -d= -f2
	2990	fi
[2183]	2991	exit 0
[1885]	2992	fi
	2993
[2963]	2994	LogFile "mindi v$MINDI_VERSION"
[3513]	2995	LogFile "-----------------------------"
	2996	LogFile "Start date : `date`"
	2997	LogFile "-----------------------------"
[2963]	2998	LogFile "$ARCH architecture detected"
	2999	LogFile "mindi called with the following arguments:"
[2978]	3000	echo "$@">> $LOGFILE
[2963]	3001	LogFile "-----------------------------"
[3513]	3002	LogFile "pbdistrocheck results:"
	3003	pbdistrocheck >> $LOGFILE
	3004	LogFile "-----------------------------"
[747]	3005
[1010]	3006	# Log some capital variables
	3007	[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
[3149]	3008	[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
[2963]	3009	LogFile "MONDO_SHARE = $MONDO_SHARE"
	3010	LogFile "MINDI_LIB = $MINDI_LIB"
	3011	LogFile "MINDI_SBIN = $MINDI_SBIN"
	3012	LogFile "MINDI_CONF = $MINDI_CONF"
[3388]	3013	# Purge from potential old run
	3014	if [ _"$MINDI_CACHE" = _"" ]; then
	3015	Die "MINDI_CACHE undefined"
	3016	else
	3017	LogFile "MINDI_CACHE = $MINDI_CACHE"
	3018	fi
	3019
[1885]	3020	if [ -f $MINDI_CONFIG ]; then
[2963]	3021	LogFile "-----------------------------"
	3022	LogFile " Mindi configuration file "
	3023	LogFile "-----------------------------"
[1885]	3024	grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
[2963]	3025	LogFile "-----------------------------"
[1885]	3026	fi
[2995]	3027	LogFile "In Mindi"
	3028	LogFile "--------"
	3029	LogFile "EXTRA_SPACE = $EXTRA_SPACE"
	3030	LogFile "--------"
[1010]	3031
[747]	3032	trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
[1010]	3033
	3034	# Sanity checks
	3035	which which > /dev/null 2> /dev/null \|\| Die "Please install 'which'."
	3036	which strings > /dev/null 2> /dev/null \|\| Die "Please install binutils and libbinutils; you have no 'strings' executable."
	3037	which gawk > /dev/null 2> /dev/null \|\| Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
	3038	which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` \|\| AWK="`which awk 2>/dev/null`"
	3039	if which awk &> /dev/null ; then
	3040	if ! which gawk &> /dev/null ; then
[3565]	3041	LogAll "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
[1010]	3042	fi
	3043	fi
	3044	which mke2fs > /dev/null 2> /dev/null \|\| Die "Please put mke2fs in system path"
[2222]	3045	[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
[1010]	3046
[3005]	3047	[ "`echo $KERVERRUN \| grep -E "2\.4\.[0-6]" \| grep -vE "2\.4\.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
[1010]	3048
	3049	# Update the PATH variable if incomplete
	3050	if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
	3051	PATH=$PATH:/sbin:/usr/sbin
	3052	export PATH
[2963]	3053	LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
	3054	LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
[3255]	3055	LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
[1010]	3056	fi
	3057
[1737]	3058	if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
[3368]	3059	Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
[1010]	3060	fi
	3061
[3149]	3062	### TODO
[747]	3063	### Fix as it's not mandatory on ia64
	3064	if [ "$ARCH" = "ia64" ] ; then
[1010]	3065	if which elilo &> /dev/null ; then
	3066	LILO_EXE=elilo
	3067	else
[2024]	3068	LILO_EXE=`which false 2> /dev/null`
[1010]	3069	fi
[747]	3070	else
	3071	FindIsolinuxBinary
	3072	fi
	3073	trap "Aborted" SIGTERM
	3074	DONE="\r\t\t\t\t\t\t\t\tDone. "
	3075	kernelpath=""
[1010]	3076	MONDO_ROOT=/var/cache/mondo
[747]	3077	mkdir -p $MONDO_ROOT
	3078
	3079	if [ -d "/proc/lvm" ]; then
	3080	# LVM v1
	3081	LVMCMD=""
	3082	LVM="v1"
	3083	elif [ -d "/dev/mapper" ]; then
	3084	# LVM v2
	3085	LVMCMD="lvm"
	3086	LVM="v2"
	3087	else
	3088	LVM="false"
	3089	fi
[3149]	3090
	3091	if [ -e "/proc/cmdline" ]; then
	3092	CMDLINE="/proc/cmdline"
	3093	elif [ -e "/tmp/cmdline" ]; then
	3094	CMDLINE="/tmp/cmdline"
	3095	else
	3096	CMDLINE="/dev/null"
	3097	fi
	3098
[2963]	3099	LogFile "INFO: LVM set to $LVM"
	3100	LogFile "----------"
	3101	LogFile "mount result:"
	3102	LogFile "-------------"
[1230]	3103	mount >> $LOGFILE
[3479]	3104	if [ -e "/etc/raidtab" ]; then
[2963]	3105	LogFile "-------------"
	3106	LogFile "/etc/raidtab content:"
	3107	LogFile "-------------"
[1315]	3108	cat /etc/raidtab >> $LOGFILE
[3077]	3109	else
[3073]	3110	LogFile "No file /etc/raidtab"
[1315]	3111	fi
[3479]	3112	if [ -e "/etc/mdadm.conf" ]; then
[2981]	3113	LogFile "-------------"
	3114	LogFile "/etc/mdadm.conf content:"
	3115	LogFile "-------------"
	3116	cat /etc/mdadm.conf >> $LOGFILE
[3077]	3117	else
[3149]	3118	LogFile "-------------"
[3073]	3119	LogFile "No file /etc/mdadm.conf"
[2981]	3120	fi
[2963]	3121	LogFile "-------------"
[3149]	3122	LogFile "cat $CMDLINE"
[2963]	3123	LogFile "-------------"
[3149]	3124	cat $CMDLINE >> $LOGFILE
[2963]	3125	LogFile "-------------"
	3126	LogFile "cat /proc/swaps:"
	3127	LogFile "-------------"
[2014]	3128	cat /proc/swaps >> $LOGFILE
[2963]	3129	LogFile "-------------"
[3479]	3130	if [ -e "/proc/mdstat" ]; then
[3073]	3131	LogFile "cat /proc/mdstat:"
	3132	LogFile "-------------"
	3133	cat /proc/mdstat >> $LOGFILE
[3077]	3134	else
[3073]	3135	LogFile "No pseudo file /proc/mdstat"
	3136	fi
[2981]	3137	LogFile "-------------"
[2963]	3138	LogFile "cat /proc/partitions:"
	3139	LogFile "-------------"
[2015]	3140	cat /proc/partitions >> $LOGFILE
[2963]	3141	LogFile "-------------"
	3142	LogFile "cat /proc/filesystems:"
	3143	LogFile "-------------"
[2015]	3144	cat /proc/filesystems >> $LOGFILE
[2963]	3145	LogFile "-------------"
	3146	LogFile "lsmod result:"
	3147	LogFile "-------------"
[1021]	3148	lsmod >> $LOGFILE
[2431]	3149	MODULES="`cat /proc/modules \| $AWK '{print $1}'`"
[1531]	3150	if [ -x /usr/sbin/esxcfg-module ]; then
[2963]	3151	LogFile "-------------"
	3152	LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
	3153	LogFile "-------------"
	3154	LogFile "VMWare modules"
	3155	LogFile "-------------"
[1531]	3156	/usr/sbin/esxcfg-module -l >> $LOGFILE
[2431]	3157	MODULES="$MODULES `/usr/sbin/esxcfg-module -l \| $AWK '{print $1}'`"
[1497]	3158	fi
[3149]	3159	LogFile "-------------"
[2963]	3160	LogFile "FORCE_MODS:"
	3161	LogFile "-------------"
[3065]	3162	LogFile "$FORCE_MODS"
[2963]	3163	LogFile "-------------"
	3164	LogFile "DENY_MODS:"
	3165	LogFile "-------------"
[3065]	3166	LogFile "$DENY_MODS"
[2963]	3167	LogFile "-------------"
	3168	LogFile "df result:"
	3169	LogFile "----------"
[3117]	3170	df -aT >> $LOGFILE
[2963]	3171	LogFile "-------------"
[3117]	3172	LogFile "df -i result:"
	3173	LogFile "----------"
	3174	df -i >> $LOGFILE
	3175	LogFile "-------------"
	3176	if [ -r /boot/grub/menu.lst ]; then
	3177	LogFile "-------------"
	3178	LogFile "INFO: /boot/grub/menu.lst content"
	3179	LogFile "-------------"
	3180	cat /boot/grub/menu.lst >> $LOGFILE
[3123]	3181	LogFile "-------------"
[3117]	3182	fi
[3123]	3183	if [ -r /boot/grub/grub.conf ]; then
[3117]	3184	LogFile "-------------"
[3123]	3185	LogFile "INFO: /boot/grub/grub.conf content"
	3186	LogFile "-------------"
	3187	cat /boot/grub/grub.conf >> $LOGFILE
	3188	LogFile "-------------"
	3189	fi
	3190	if [ -r /boot/grub/grub.cfg ]; then
	3191	LogFile "-------------"
	3192	LogFile "INFO: /boot/grub/grub.cfg content"
	3193	LogFile "-------------"
	3194	cat /boot/grub/grub.cfg >> $LOGFILE
	3195	LogFile "-------------"
	3196	fi
	3197	if [ -r /boot/grub/device.map ]; then
	3198	LogFile "-------------"
[3117]	3199	LogFile "INFO: /boot/grub/device.map content"
	3200	LogFile "-------------"
[3123]	3201	cat /boot/grub/device.map >> $LOGFILE
	3202	LogFile "-------------"
[3117]	3203	fi
	3204	if [ -r /etc/lilo.conf ]; then
	3205	LogFile "-------------"
	3206	LogFile "INFO: /etc/lilo.conf content"
	3207	LogFile "-------------"
	3208	cat /etc/lilo.conf >> $LOGFILE
	3209	fi
[3378]	3210	if [ -d /boot/efi ]; then
[3425]	3211	gcf=`find /boot/efi -name 'grub.c*'`
[3384]	3212	if [ _"$gcf" = _"" ]; then
[3425]	3213	LogFile "Found a /boot/efi directory without a grub config file in it"
[3384]	3214	else
	3215	LogFile "-------------"
	3216	LogFile "INFO: $gcf content"
	3217	LogFile "-------------"
	3218	cat $gcf >> $LOGFILE
	3219	LogFile "-------------"
	3220	fi
[3378]	3221	fi
	3222
[3146]	3223	LogFile "Full fdisk info"
	3224	LogFile "---------------"
	3225	$FDISK -l >> $LOGFILE
	3226	LogFile "----------------"
[747]	3227
[1723]	3228	# Compute libata version
[2649]	3229	laver=`modinfo libata 2> /dev/null \| grep -Ei '^Version:' \| cut -d: -f2 \| cut -d. -f1 \| sed 's/ *//g' 2> /dev/null`
[1723]	3230	# If libata v2 is used then remove ide-generic as it will perturbate boot
[1726]	3231	if [ "`echo $MODULES \| grep libata`" ]; then
[1727]	3232	if [ "$laver" = "2" ]; then
[1726]	3233	DENY_MODS="$DENY_MODS ide-generic"
[2963]	3234	LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
	3235	LogFile "-------------"
[1726]	3236	fi
[1723]	3237	fi
	3238
[2963]	3239	# Check for McAfee which disturbs the access to some files (tgz in articular)
[2976]	3240	if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
[2963]	3241	LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
	3242	LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
	3243	LogFile "WARNING: You have two options:"
	3244	LogFile "WARNING: - Exclude all directories with special files (check McAfee System Events Log)"
	3245	LogFile "WARNING: - Disable the scanner during the backup"
	3246	fi
	3247
[1684]	3248	#
	3249	# If we have a USB device we need to store info
	3250	# and remove it from the parameters line
	3251	#
[747]	3252	if [ "$#" -ne "0" ] ; then
[1684]	3253	if [ "$1" = "--usb" ] ; then
	3254	shift
	3255	USBDEVICE=$1
	3256	if [ _"$USBDEVICE" = _"" ]; then
	3257	Die "No USB device specified"
	3258	fi
	3259	shift
	3260	fi
	3261	fi
	3262
	3263	if [ "$#" -ne "0" ] ; then
[747]	3264	if [ "$1" = "--findkernel" ] ; then
[2880]	3265	resk=`TryToFindKernelPath`
[1336]	3266	# Avoids logfile content for mondo
	3267	export MONDO_SHARE=""
[2880]	3268	if [ "$resk" = "" ] ; then
[2838]	3269	if [ $KERNEL_IS_XEN = "yes" ]; then
	3270	echo "$xenkernelpath"
[2963]	3271	LogFile "INFO: xenkernelpath = $xenkernelpath"
[2860]	3272	MindiExit 0
[2838]	3273	else
[2860]	3274	MindiExit -1
[2838]	3275	fi
[747]	3276	else
[2880]	3277	echo "$resk"
[2963]	3278	LogFile "INFO: kernelpath = $resk"
[2860]	3279	MindiExit 0
[747]	3280	fi
[1720]	3281	elif [ "$1" = "--locatedeps" ] ; then
	3282	[ ! "$2" ] && Die "Please specify the binary to look at"
[2438]	3283	LocateDeps $*
[1720]	3284	# Avoids logfile content for mondo
	3285	export MONDO_SHARE=""
	3286	MindiExit $?
[1815]	3287	elif [ "$1" = "--readalllink" ] ; then
	3288	[ ! "$2" ] && Die "Please specify the binary to look at"
	3289	# Avoids logfile content for mondo
	3290	export MONDO_SHARE=""
[3231]	3291	mr-read-all-link $2
[1815]	3292	MindiExit $?
[3518]	3293	elif [ "$1" = "--makebcf" ] ; then
[3520]	3294	[ ! "$2" ] && Die "Please specify the boot loader to check (syslinux, grub, grub2)"
[3518]	3295	MakeBootConfFile $2
[3519]	3296	MindiExit 0
[2731]	3297	elif [ "$1" = "--makemessage" ] ; then
[2948]	3298	MakeMessageFile \| cut -c1-80
[2731]	3299	MindiExit 0
[747]	3300	elif [ "$1" = "--makemountlist" ] ; then
	3301	[ ! "$2" ] && Die "Please specify the output file"
	3302	MakeMountlist $2
[2432]	3303	CheckMountlist $2
[1336]	3304	# Avoids logfile content for mondo
	3305	export MONDO_SHARE=""
[925]	3306	MindiExit $?
	3307	elif [ "$1" = "-V" ] \|\| [ "$1" = "-v" ] \|\| [ "$1" = "--version" ] \|\| [ "$1" = "-version" ] ; then
	3308	echo "Mindi v$MINDI_VERSION"
[1336]	3309	# Avoids logfile content for mondo
	3310	export MONDO_SHARE=""
[925]	3311	MindiExit 0
[747]	3312	elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
[940]	3313	MONDO_TMP=$2
	3314	# Change MINDI_TMP for the one provided by mondo
	3315	# So that it can get back the built files
[2153]	3316	if [ _"$MONDO_TMP" = _"" ]; then
	3317	Die "MONDO_TMP is empty, aborting"
	3318	fi
	3319	if [ _"$MONDO_TMP" = _"/" ]; then
	3320	Die "MONDO_TMP is /, aborting"
	3321	fi
[2092]	3322	mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
[1010]	3323	rmdir $MINDI_TMP
[1486]	3324	export MINDI_TMP=$MONDO_TMP
[953]	3325	mkdir -p $MINDI_TMP
[2238]	3326
[1696]	3327	# This is the scratch dir in mondo - subdir images
[1880]	3328	MINDI_CACHE=$3
[3388]	3329	LogFile "MINDI_CACHE = $MINDI_CACHE"
[2238]	3330
[925]	3331	kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
[2681]	3332	[ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
	3333
[747]	3334	###
	3335	### Sq-Modification...
	3336	### Attempt to locate kernel specific module path
	3337	### if module path is found then use it other wise use uname -r to set it...
	3338	###
[2629]	3339	if [ $KERNEL_IS_XEN = "yes" ]; then
[3149]	3340	LogAll "INFO: xenkernelpath = $xenkernelpath"
[2629]	3341	fi
[2657]	3342	kernelname=`echo $kernelpath \| cut -d'-' -f2- \| sed 's/.[bg]z[2]*$//'`
[3231]	3343	if [ ! -d "/lib/modules/$kernelname" ]; then
[3149]	3344	LogAll "WARNING: Module path for ${kernelpath} not found..."
	3345	LogAll " using running kernel\'s modules."
[2292]	3346	kernelname=$KERVERRUN
[3149]	3347	else
[3426]	3348	LogAll "INFO: Using modules for kernel: ${kernelname}"
[747]	3349	fi
[3149]	3350	LogAll "INFO: kernelname = $kernelname"
	3351	LogAll "INFO: kernelpath = $kernelpath"
[747]	3352	###
	3353	### end of Sq-Modification
	3354	###
[925]	3355	TAPEDEV=$5
	3356	TAPESIZE=$6
	3357	FILES_IN_FILELIST=$7
	3358	USE_LZO=$8
	3359	CDRECOVERY=$9
[747]	3360	if [ "${10}" = "(null)" ] \|\| [ "${10}" = "" ] ; then
	3361	IMAGE_DEVS=""
	3362	else
	3363	IMAGE_DEVS="`echo "${10}" \| tr '\|' ' '`"
	3364	fi
[925]	3365	if [ "${11}" ] ; then
	3366	LILO_OPTIONS=""
[3149]	3367	# LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
[925]	3368	fi
	3369	LAST_FILELIST_NUMBER=${12}
[747]	3370	ESTIMATED_TOTAL_NOOF_SLICES=${13}
[2564]	3371	export MINDI_EXCLUDE_DEVS="${14}"
[747]	3372	USE_COMP="${15}"
	3373	USE_LILO="${16}"
[925]	3374	USE_STAR="${17}"
	3375	INTERNAL_TAPE_BLOCK_SIZE="${18}"
[747]	3376	DIFFERENTIAL="${19}"
[998]	3377	USE_GZIP="${20}"
[3353]	3378	USE_LZMA="${21}"
	3379	NOT_BOOT="${22}"
[3397]	3380	BOOT_TYPE="${23}"
[747]	3381	[ "$USE_COMP" = "" ] && USE_COMP=yes
[998]	3382	[ "$USE_GZIP" = "" ] && USE_GZIP=no
[3353]	3383	[ "$USE_LZMA" = "" ] && USE_LZMA=no
[747]	3384	[ "$NOT_BOOT" = "" ] && NOT_BOOT=no
[3565]	3385	[ "$TAPEDEV" ] && LogAll "INFO: This is a tape-based backup. Fine."
[1696]	3386	# MONDO_ROOT is the real scratchdir
[1880]	3387	MONDO_ROOT=`echo $MINDI_CACHE \| sed 's/\(.\)\/./\1/'`
[938]	3388	if [ _"$MONDO_ROOT" != _"" ]; then
	3389	mkdir -p $MONDO_ROOT
	3390	else
	3391	Die "MONDO_ROOT is undefined"
	3392	fi
[747]	3393	else
[3149]	3394	LogScreen "Syntax: mindi (--custom ....)"
[925]	3395	MindiExit -1
[747]	3396	fi
	3397	fi
[2238]	3398
	3399	if [ _"$MINDI_CACHE" != _"" ]; then
	3400	rm -rf $MINDI_CACHE/* 2> /dev/null
	3401	mkdir -p $MINDI_CACHE
	3402	fi
	3403
[747]	3404	[ "$CDRECOVERY" = "yes" ] \|\| CDRECOVERY=no
	3405
[1684]	3406	if [ _"$MONDO_SHARE" = _"" ]; then
[3565]	3407	LogAll "Mindi Linux mini-distro generator v$MINDI_VERSION"
	3408	LogAll "Latest Mindi is available from http://www.mondorescue.org"
	3409	LogAll "BusyBox sources are available from http://www.busybox.net"
	3410	LogAll "------------------------------------------------------------------------------"
[747]	3411	else
[3426]	3412	LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
[747]	3413	fi
[3231]	3414	if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
[3565]	3415	LogAll "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 \| head -1`"
[1005]	3416	else
[3565]	3417	LogAll "ERROR: Unable to find mindi-busybox, please install it"
[1005]	3418	MindiExit -1
	3419	fi
[747]	3420
	3421	for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
[3111]	3422	modinfo $i 2> /dev/null 1> /dev/null
[3014]	3423	if [ $? -eq 0 ]; then
	3424	modprobe $i 2>&1 > /dev/null
	3425	fi
[747]	3426	done
	3427
[2963]	3428	LogFile "DIFFERENTIAL = $DIFFERENTIAL"
	3429	LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
	3430	LogFile "NOT_BOOT = '$NOT_BOOT'"
[747]	3431	if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
[3565]	3432	LogAll "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
[3278]	3433	MakeMondoConfigFile $MINDI_TMP/$MRCFG
[940]	3434	MakeMountlist $MINDI_TMP/mountlist.txt
[2432]	3435	CheckMountlist $MINDI_TMP/mountlist.txt
[940]	3436	mkdir -p $MINDI_TMP/small-all/tmp
[3565]	3437	cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} $MINDI_TMP/small-all/tmp 2>> $LOGFILE \|\| Die "Cannot copy small all.tar.gz"
	3438	(cd $MINDI_TMP/small-all ; tar -cv ./tmp \| gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log \|\| Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log)
[747]	3439	sleep 2
[3565]	3440	LogAll "Done. Exiting."
[925]	3441	MindiExit 0
[747]	3442	fi
	3443
[1690]	3444	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[3565]	3445	LogAll "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
[1684]	3446	fi
	3447
[747]	3448	if [ "$kernelpath" = "" ] ; then
[1335]	3449	[ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
[3522]	3450	echo -en "\nDo you want to use your own kernel to build the boot disk ([y]/n) ?"
[966]	3451	read ch
	3452	if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
	3453	USE_OWN_KERNEL="yes"
[1809]	3454	else
	3455	USE_OWN_KERNEL="no"
[747]	3456	fi
	3457	if [ "$USE_OWN_KERNEL" = "yes" ]; then
[925]	3458	kernelpath=`TryToFindKernelPath`
	3459	if [ "$kernelpath" = "" ] ; then
	3460	echo -n "Please enter kernel path : "
	3461	read kernelpath
	3462	fi
[747]	3463	fi
	3464	fi
[3231]	3465
[1880]	3466	echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
[3565]	3467	[ "$(($RANDOM%64))" -eq "0" ] && LogAll "INFO: Dude, I've looked inside your computer and it's really dusty..."
[747]	3468
[3248]	3469	mountpoint=$MINDI_TMP/mountpoint.$$
[1983]	3470	PrepareDataDiskImages
	3471
[3522]	3472	MakeBootInitFile $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath \| cut -f1` \|\| Die "Could not create initrd.img"
	3473
[747]	3474	[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
	3475	...Or type 'memtest' to test your PC's RAM thoroughly.\n"
	3476
[1684]	3477	if [ _"$MONDO_SHARE" = _"" ]; then
[1983]	3478	OfferToMakeBootableISO
[1684]	3479	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
[1983]	3480	OfferToMakeBootableUSB
[1684]	3481	fi
[3522]	3482	LogAll "INFO: Mindi Finished"
[747]	3483	elif [ "$TAPEDEV" ] ; then
[2078]	3484	if [ "$ARCH" != "ia64" ] ; then
	3485	# We need to keep the img file as boot file for ia64 platform
	3486	rm -f $MINDI_CACHE/{img,iso}
	3487	else
	3488	rm -f $MINDI_CACHE/*iso
	3489	fi
[1898]	3490	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	3491	OfferToMakeBootableUSB
[1898]	3492	fi
[1983]	3493	OfferToMakeBootableISO
[1880]	3494	if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
	3495	cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
[747]	3496	else
[925]	3497	Die "Cannot find all.tar.gz, to be written to tape"
[747]	3498	fi
[1695]	3499	elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	3500	OfferToMakeBootableUSB
[747]	3501	else
[1983]	3502	OfferToMakeBootableISO
[747]	3503	fi
[3391]	3504
[3396]	3505	if [ -f $MINDI_TMP/$MRCFG ]; then
[3425]	3506	LogFile "INFO: Your $MRCFG file is:"
	3507	LogFile "--------------------------"
	3508	cat $MINDI_TMP/$MRCFG >> $LOGFILE
	3509	LogFile "--------------------------"
[3391]	3510	else
[3421]	3511	if [ _"$MONDO_SHARE" != _"" ] ; then
[3565]	3512	LogAll "ERROR: You don't have a $MRCFG file !"
[3421]	3513	fi
[3391]	3514	fi
[747]	3515	# cleanup
[925]	3516	MindiExit 0

Note: See TracBrowser for help on using the repository browser.

Download in other formats: