source: MondoRescue/branches/3.2/mindi-busybox/scripts/kconfig/Makefile@ 3186

# ===========================================================================
# Kernel configuration targets
# These targets are used from top-level makefile

PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config

xconfig: $(obj)/qconf
    $< Config.in

gconfig: $(obj)/gconf
    $< Config.in

menuconfig: $(obj)/mconf
    $(Q)$(MAKE) $(build)=scripts/kconfig/lxdialog
    $< Config.in

config: $(obj)/conf
    $< Config.in

# Mtime granularity problem.
# It was observed that these commands:
# make allnoconfig; sed -i -e '/CONFIG_TRUE/s/.*/CONFIG_TRUE=y/' .config; make
# sometimes produce busybox with "true" applet still disabled.
# This is caused by .config updated by sed having mtime which is still
# equal to (not bigger than) include/autoconf.h's mtime,
# and thus 2nd make does not regenerate include/autoconf.h.
# Waiting for 1 second after non-interactive "make XXXXconfig"
# prevents this from happening.
#
# We'd like to detect whether filesystem we are on has coarse mtimes,
# but can't do it yet, bbox ls hasn't got --full-time.
#MTIME_IS_COARSE:=@ls --full-time -ld | grep -F .000 >/dev/null
MTIME_IS_COARSE:=@true

oldconfig: $(obj)/conf
    $< -o Config.in
    $(MTIME_IS_COARSE) && sleep 1

silentoldconfig: $(obj)/conf
    $< -s Config.in
    $(MTIME_IS_COARSE) && sleep 1

update-po-config: $(obj)/kxgettext
    xgettext --default-domain=linux \
          --add-comments --keyword=_ --keyword=N_ \
          --files-from=scripts/kconfig/POTFILES.in \
          --output scripts/kconfig/config.pot
    $(Q)ln -fs Kconfig_i386 arch/um/Kconfig_arch
    $(Q)for i in `ls arch/`; \
    do \
      scripts/kconfig/kxgettext arch/$$i/Kconfig \
        | msguniq -o scripts/kconfig/linux_$${i}.pot; \
    done
    $(Q)msgcat scripts/kconfig/config.pot \
      `find scripts/kconfig/ -type f -name linux_*.pot` \
      --output scripts/kconfig/linux_raw.pot
    $(Q)msguniq --sort-by-file scripts/kconfig/linux_raw.pot \
        --output scripts/kconfig/linux.pot
    $(Q)rm -f arch/um/Kconfig_arch
    $(Q)rm -f scripts/kconfig/linux_*.pot scripts/kconfig/config.pot

PHONY += randconfig allyesconfig allnoconfig allmodconfig defconfig

randconfig: $(obj)/conf
    $< -r Config.in
    $(MTIME_IS_COARSE) && sleep 1

allyesconfig: $(obj)/conf
    $< -y Config.in
    $(MTIME_IS_COARSE) && sleep 1

allnoconfig: $(obj)/conf
    $< -n Config.in
    $(MTIME_IS_COARSE) && sleep 1

allmodconfig: $(obj)/conf
    $< -m Config.in
    $(MTIME_IS_COARSE) && sleep 1

defconfig: $(obj)/conf
ifeq ($(KBUILD_DEFCONFIG),)
    $< -d Config.in
else
    @echo *** Default configuration is based on '$(KBUILD_DEFCONFIG)'
    $(Q)$< -D $(KBUILD_DEFCONFIG) Config.in
endif
    $(MTIME_IS_COARSE) && sleep 1

%_defconfig: $(obj)/conf
    $(Q)$< -D $@ Config.in
    $(MTIME_IS_COARSE) && sleep 1

# Help text used by make help
help:
    @echo  '  config      - Update current config utilising a line-oriented program'
    @echo  '  menuconfig      - Update current config utilising a menu based program'
    @echo  '  xconfig     - Update current config utilising a QT based front-end'
    @echo  '  gconfig     - Update current config utilising a GTK based front-end'
    @echo  '  oldconfig   - Update current config utilising a provided .config as base'
    @echo  '  randconfig      - New config with random answer to all options'
    @echo  '  defconfig   - New config with default answer to all options'
    @echo  '  allmodconfig    - New config selecting modules when possible'
    @echo  '  allyesconfig    - New config where all options are accepted with yes'
    @echo  '  allnoconfig     - New config where all options are answered with no'

# ===========================================================================
# Shared Makefile for the various kconfig executables:
# conf:   Used for defconfig, oldconfig and related targets
# mconf:  Used for the mconfig target.
#         Utilizes the lxdialog package
# qconf:  Used for the xconfig target
#         Based on QT which needs to be installed to compile it
# gconf:  Used for the gconfig target
#         Based on GTK which needs to be installed to compile it
# object files used by all kconfig flavours

hostprogs-y := conf mconf qconf gconf kxgettext
conf-objs   := conf.o  zconf.tab.o
mconf-objs  := mconf.o zconf.tab.o
kxgettext-objs  := kxgettext.o zconf.tab.o

ifeq ($(MAKECMDGOALS),xconfig)
    qconf-target := 1
endif
ifeq ($(MAKECMDGOALS),gconfig)
    gconf-target := 1
endif


ifeq ($(qconf-target),1)
qconf-cxxobjs   := qconf.o
qconf-objs  := kconfig_load.o zconf.tab.o
endif

ifeq ($(gconf-target),1)
gconf-objs  := gconf.o kconfig_load.o zconf.tab.o
endif

clean-files := lkc_defs.h qconf.moc .tmp_qtcheck \
           .tmp_gtkcheck zconf.tab.c lex.zconf.c zconf.hash.c
subdir- += lxdialog

# Add environment specific flags
HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCC) $(HOSTCFLAGS))

# generated files seem to need this to find local include files
HOSTCFLAGS_lex.zconf.o  := -I$(src)
HOSTCFLAGS_zconf.tab.o  := -I$(src)

HOSTLOADLIBES_qconf = $(KC_QT_LIBS) -ldl
HOSTCXXFLAGS_qconf.o    = $(KC_QT_CFLAGS) -D LKC_DIRECT_LINK

HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0`
HOSTCFLAGS_gconf.o  = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
                          -D LKC_DIRECT_LINK

$(obj)/qconf.o: $(obj)/.tmp_qtcheck

ifeq ($(qconf-target),1)
$(obj)/.tmp_qtcheck: $(src)/Makefile
-include $(obj)/.tmp_qtcheck

# QT needs some extra effort...
$(obj)/.tmp_qtcheck:
    @set -e; echo "  CHECK   qt"; dir=""; pkg=""; \
    pkg-config --exists qt 2> /dev/null && pkg=qt; \
    pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
    if [ -n "$$pkg" ]; then \
      cflags="\$$(shell pkg-config $$pkg --cflags)"; \
      libs="\$$(shell pkg-config $$pkg --libs)"; \
      moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
      dir="$$(pkg-config $$pkg --variable=prefix)"; \
    else \
      for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
        if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
      done; \
      if [ -z "$$dir" ]; then \
        echo "*"; \
        echo "* Unable to find the QT installation. Please make sure that"; \
        echo "* the QT development package is correctly installed and"; \
        echo "* either install pkg-config or set the QTDIR environment"; \
        echo "* variable to the correct location."; \
        echo "*"; \
        false; \
      fi; \
      libpath=$$dir/lib; lib=qt; osdir=""; \
      $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
        osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
      test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
      test -f $$libpath/libqt-mt.so && lib=qt-mt; \
      cflags="-I$$dir/include"; \
      libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
      moc="$$dir/bin/moc"; \
    fi; \
    if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
      echo "*"; \
      echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
      echo "*"; \
      moc="/usr/bin/moc"; \
    fi; \
    echo "KC_QT_CFLAGS=$$cflags" > $@; \
    echo "KC_QT_LIBS=$$libs" >> $@; \
    echo "KC_QT_MOC=$$moc" >> $@
endif

$(obj)/gconf.o: $(obj)/.tmp_gtkcheck

ifeq ($(gconf-target),1)
-include $(obj)/.tmp_gtkcheck

# GTK needs some extra effort, too...
$(obj)/.tmp_gtkcheck:
    @if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then       \
        if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then          \
            touch $@;                               \
        else                                    \
            echo "*";                           \
            echo "* GTK+ is present but version >= 2.0.0 is required."; \
            echo "*";                           \
            false;                              \
        fi                                  \
    else                                        \
        echo "*";                               \
        echo "* Unable to find the GTK+ installation. Please make sure that";   \
        echo "* the GTK+ 2.0 development package is correctly installed...";    \
        echo "* You need gtk+-2.0, glib-2.0 and libglade-2.0.";         \
        echo "*";                               \
        false;                                  \
    fi
endif

$(obj)/zconf.tab.o: $(obj)/lex.zconf.c $(obj)/zconf.hash.c

$(obj)/kconfig_load.o: $(obj)/lkc_defs.h

$(obj)/qconf.o: $(obj)/qconf.moc $(obj)/lkc_defs.h

$(obj)/gconf.o: $(obj)/lkc_defs.h

$(obj)/%.moc: $(src)/%.h
    $(KC_QT_MOC) -i $< -o $@

$(obj)/lkc_defs.h: $(src)/lkc_proto.h
    sed < $< > $@ 's/P(\([^,]*\),.*/#define \1 (\*\1_p)/'


###
# The following requires flex/bison/gperf
# By default we use the _shipped versions, uncomment the following line if
# you are modifying the flex/bison src.
# LKC_GENPARSER := 1

ifdef LKC_GENPARSER

$(obj)/zconf.tab.c: $(src)/zconf.y
$(obj)/lex.zconf.c: $(src)/zconf.l
$(obj)/zconf.hash.c: $(src)/zconf.gperf

%.tab.c: %.y
    bison -l -b $* -p $(notdir $*) $<
    cp $@ $@_shipped

lex.%.c: %.l
    flex -L -P$(notdir $*) -o$@ $<
    cp $@ $@_shipped

%.hash.c: %.gperf
    gperf < $< > $@
    cp $@ $@_shipped

endif